Icopal SFT Adhesive - Siplast International

Solvent free glue
Icopal SFT Adhesive - single component solvent free
adhesive
Environmental-friendly: solvent free
No labels regarding sensitizing and toxicity
Quick drying
Watertight
Suitable for various substrates
High resistance to water, grease, and climatic variations
High wind uplift performances when applied as glue for
insulation boards
Low consumption rate
Icopal SFT Adhesive
Single component solvent free adhesive
Description
Packaging
ICOPAL SFT ADHESIVE is an Eco-Activ glue: black in colour, the
product is a single component, non toxic and solvent free, specially
formulated for watertight adhesion, complete bonding or details
(sidelaps, endlaps, upstands).
Product available in the following packaging:
ICOPAL SFT ADHESIVE is a blend of proprietary polymers and
modifiers, engineered to cure completely in a wide variety of
ambient conditions on various substrates.
Volume
Icopal SFT Adhesive Cardridge
300 ml
Icopal SFT Adhesive Sausage
600 ml
Icopal SFT Adhesive Can
4 kg
Icopal SFT Adhesive Bucket
14 kg
Preparation of the support
The substrates must be clean, dry, oil and grease free.
Minimal packaging to reduce waste after application.
For more information, please consult the Product Technical Information.
Use and application
ICOPAL SFT ADHESIVE can be used as an adhesive for indoor or
outdoor, over:
Various kinds of bearing elements such as galvanised steel and
wood;
Bituminous waterproofing membranes;
Insulation boards.
The support doesn’t need to be covered with a bituminous primer
before application of ICOPAL SFT ADHESIVE.
Application from cartridge/sausages is made with appriopriate hand
guns (cords).
ICOPAL SFT ADHESIVE can also be installed from the buckets or
from the cans with a notched spatula (notches of 2 mm spaced by
2 mm) for full bonding area.
Cleaning
Product yield
Low consumption rate. Exemple of application: bonding of insulation
boards:
Kind of support
Consumption (g/m²)
Wood
150(*) to 250(**)
Steel
(*) bonding by cords of 50g / cord
10 to 15 mm wide (3 cords per
board 600 x 1200 mm).
(**) bonding by studs of 50 g / stud
(5 studs per board 600 x 1200 mm)
Bituminous waterproofing
membrane
This document is only a guide. Siplast-Icopal reserves the right to change the composition and fixing
recommendations of products as a result of evolution of knowledge and technology.
An Icopal Group Company
ICOPAL SAS | 12, rue de la Renaissance | F - 92184 Antony | Tel. +33 (0)1 40 96 35 00 | Fax. +33 (0)1 46 66 24 85 | www.siplast-international.com
N1-1 09/13 – Photos : Icopal | R.C.S. Nanterre B 552 100 984 – Pictures are not contractual
Use a dry cloth for cleaning the application tools that have come
into contact with ICOPAL SFT ADHESIVE, before curing.