dymaxrail tools and machines

Transcription

COVER
DYMAXMINING
TOOLS
DYMAXRAIL
TOOLS ANDWORK
MACHINES
Specifications and design subject to change without notice
www.DYMAXMINING.com
page 5
1
TABLE OF CONTENTS
US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
TABLE OF CONTENTS
A Century of Commitment to Our Customers
3
Conversion Tables
4
Machine Class
5
ROK·GÄARD™ Chromium Carbide Armor Superior Wear Protection
ROK·GÄARD™ Severe-Duty Buckets - Excavators/Shovel
ROK·GÄARD™ U-Blades - Track Dozer
6-7
8-9
10-11
Track and Wheel Dozer Section
U-Blades for Track and Wheel Dozers
Coal U-Blades for stockpile coal pushing
12
Heavy-Duty U-Blades for demanding workloads
13
Reclamation U-Blades for oversize earth moving
14
Semi U-Blades for Track and Wheel Dozers
15
Semi U-Blades for rock, grading and road-building applications
Centermax™ Blades for Track Dozers
16
Centermax™ Blades for constant material flow in wet sticky mud and clay
Coal Scoops for Wheel Dozers
17
Cushion Dozer blade groups for outside mounted push groups
Coal Bowldozers for Track and Wheel Dozers
18
Coal Bowldozers for hopper feeding, maximum load retention and longer push distances
Success Story - 30,000-Hour Dozer Blade Life
Wheel Loader Section
19
DYMAXMINING WORK TOOLS
Quick Coupler Systems
2
Heavy-Duty Horizontal Pin Lock Quick Coupler
20
Block Handling Quick Coupler systems
20
Success Story - Specialty Coupler System with 180° Rotation
21
Large Loader Work Tools
Spade-Nose Rock Buckets
22-23
Coal Buckets
24-25
Side Dump - Two-Way Dump Buckets
26
Skeleton Rock Buckets
27
Material Handling Booms
28
Heavy-Duty Fork Systems with and without hydraulic adjusting tines
29
Block Handling Forks
30
Success Story - Conveyor Belt Shear
Excavator/Shovel Section
Rock/Mass Excavation Buckets (Backhoe - 120 Ton - 350 Ton)
31
32-33
Hydraulic Bottom Dump Buckets (Shovels)
34
Engineer-to-Order Products - Custom Solutions
35
Mining Machinery Parts Grapples - Safety First
36
Handle large pins, clevis’, chains, ropes and other shovel and dragline parts
sales@DYMAXMINING.com
DMC212012
GENERATIONS
A CENTURY OF COMMITMENT
135-Year Family Tradition
In the early days, it was as simple as repairing wagons,
shoeing horses and performing simple blacksmithing tasks
in and around the small community of Wamego, Kansas.
As times evolved, so did machines and so did we. But one
thing remained the same - our family tradition of providing
the highest-quality, best-engineered solutions to meet our
customers’ needs.
Flash back...to the 1930’s, 40’s and 50’s. Depression, World
War, Elvis. Our family began building dozer blades for early
track-type tractor machines. During those early years, we
supplied hundreds of blades to the Korean War that were used
for building roads and landing strips. Our dozer blades helped
pave the way for the new interstate highway system project
in the 1950’s. By the 1960’s and 1970’s, we began building
oversized U-Blades for applications such as coal-fired power
plants and mined land reclamation.
Neil and John Balderson circa 1910
As time went on, so did we. In March 1997, we purchased
Dymax and began rebuilding the company based on our
experience throughout the 20th century. Today, a new
generation is born.
We Listen and We Care!
Old Balderson shop, downtown Wamego, Kansas, 1950’s.
Courtesy Willard Balderson photo archives
In 2002, Dymax built its second-generation Coal U-Blade. We
went back to our roots. Since that time, we’ve produced many
custom dozer blades for use around the world.
In 2004, we began building large Rock Buckets for large
loaders and worked with a major machine manufacturer
providing rock, coal buckets and dozer blades.
In 2010 and 2011, we developed the pin handling systems
with a world mining company to provide a safer environment
for its employees, and we introduced ROK·GÄARD™ Chromium
Carbide wear products.
We look forward to working with you!
Dymax products are proudly
built in the United States.
www.DYMAXMINING.com
DYMAXMINING
TOOLS
DYMAXRAIL
TOOLS ANDWORK
MACHINES
In 2001, Dymax developed the conveyor belt shear for cutting
old steel corded belting at a Texas mine site. The shear
featured a built-in feed roller that enabled operators to cut
the belt in 20 seconds compared to the 15 to 20 minutes it
took them when using hand saws weighing a cumbersome 80
pounds.
page 5
3
DYMAXMINING.COM
US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
CONVERSION TABLES
Multiply English Unit
by
To Obtain Metric Unit
0.7645
25.4
0.4536
cubic meter (capacity)
millimeter (mm)
kilogram (kg)
3.785
0.0689
6.89
liters per minute (LPM)
bar
kilopascal
Size/Dimensions/Capacity
cubic yard (capacity)
inch (in)
pound (lb)
Hydraulics
gallons per minute (GPM) (flow)
pounds per square inch (PSI) (pressure)
Multiply Metric Unit
by
To Obtain English Unit
1.308
0.3937
2.205
cubic yard (capacity)
inch (in)
pound (lb)
.2642
14.5
.145
gallons per minute (GPM) (flow)
Size/Dimensions/Capacity
cubic meter (capacity)
millimeter (mm)
kilogram (kg)
Hydraulics
liters per minute (LPM)
bar
kilopascal
4
DMC212012
MACHINE CLASS
MACHINE CLASS
Type
Class
Size Class
Type
Brand
Model
Type
Class
Size Class
Case
1221
WL
90
Caterpillar
980
988
990
992
993
994
WL
WL
WL
WL
WL
WL
90
100
110
120
125
130
Wheel
Dozer
Caterpillar
Tiger
824
834
844/590
690
854
WD
WD
WD
WD
WD
10
20
30
40
50
Komatsu
WD600
WD
20
Kawasaki
Doosan
500
WL
90
Hyundai
780
WL
90
95Z
115Z
135Z
WD
WD
WD
10
20
30
John Deere
844
WL
90
Caterpillar
Kawasaki
95Z
115Z
135Z
WL
WL
WL
90
100
110
Komatsu
WA500
WA600
WA700
WA800
WA900
WA1200
WL
WL
WL
WL
WL
WL
90
100
110
120
120
130
345
365
374/5
385
390
5080
5130
5230
HX
HX
HX
HX
HX
MHX
MHX
MHX
45T
65T
85T
85T
85T
120T
200T
250T
Deere
870
HX
85T
Hitachi
Letourneau
L950
L1850
WL
WL
120
130
Volvo
L220
L330
WL
WL
90
100
Caterpillar
D6
D7
D8
D9
D10
D11
TD
TD
TD
TD
TD
TD
10
20
30
40
50
60
450
650
870
1100
1200
1800
1900
2500
3500
HX
HX
HX
MHX
MHX
MHX
MHX
MHX
MHX
45T
65T
85T
120T
120T
200T
200T
250T
350T
Hyundai
Deere
750
850
950
1050
TD
TD
TD
TD
10
10
20
30
450/500
800
1200
HX
HX
MHX
45T
85T
120T
Komatsu
Komatsu
D65
D85
D155
D275
D375
D475
TD
TD
TD
TD
TD
TD
10
20
30
40
50
60
PC800
PC1250
PC2000
PC3000
HX
MHX
MHX
MHX
85T
120T
200T
300T
Liebherr
974
984
9250
HX
HX
MHX
75T
85T
250T
Linkbelt
800
HX
85T
Brand
Wheel
Loader
Track
Dozer
Excavator/
Mining
Excavator/
Shovel
www.DYMAXMINING.com
DYMAXMINING
TOOLS
DYMAXRAIL
TOOLS ANDWORK
MACHINES
Model
Type
page 5
5
ROK·GÄARD™ ARMOR
US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
ROK·GÄARD™ CHROMIUM CARBIDE ARMOR BLADES AND BUCKETS
• Dymax introduces ROK·GÄARD™ Chromium Carbide Armor.
• ROK·GÄARD™ involves the fusion of chromium carbide with wear-resistant steels to produce a superior
liner system for blades and buckets operating in the toughest mining conditions.
• ROK·GÄARD™ features a significantly higher Rockwell hardness than Hardox 400 or Hardox 500, and
much higher measurement from the ASTM G65 abrasion-resistance test.
• Users of Dymax ROK·GÄARD™ U-blades in the mining regions of Northern Canada report up to 20,000
hours of blade wear life.
• The unique combination of chromium and carbide in ROK·GÄARD™ produces an exceptionally long life
while simultaneously delivering a smooth and shiny surface, once the initial coat of paint is worn.
• The ROK·GÄARD™ surface works exceptionally well in wet, clay materials in reducing the inherent
problem of material sticking inside buckets.
• Let Dymax quote you a NEW Bucket or Blade with the best abrasion-resistant wear plates in the market
- ROK·GÄARD™ Chromium Carbide Armor!
LET DYMAX ROK·GÄARD™
YOUR NEW BLADES AND BUCKETS
6
ROK·GÄARD™
Armor covers entire
moldboard face
ROK·GÄARD™
Armor covers inside
moldboard and
interior side plates
ROK·GÄARD™
Armor exterior side
wear plates
ROK·GÄARD™
Side-cutter
Protection
DMC212012
DYMAX ROK·GÄARD™ CHROMIUM CARBIDE WEAR PLATE
Armor Plate Your Bucket, Blade or Haul Truck
You can make your investment last longer by using Dymax
ROK·GÄARD™ Chromium Carbide Armor. Dymax ROK·GÄARD™ is
available in pre-fabricated plate assemblies.
Plates can be cut at your job site and then bent to match your liner needs.
(Access to a 500T press brake will accomplish this using templates created
on site.) Use only the recommended weld wire to adhere the plates to
your blade, bucket or truck liner. Weld it and forget it. ROK·GÄARD™ is
your long-term solution.
ROK·GÄARD™
Wear Plate Size
ft (m)
Model #
Overlay
Thickness
in (mm)
Base Plate
Thickness
in (mm)
Total Plate
Thickness
in (mm)
5x10 (1.5x3.0)
DX-WPL-CC-0.25x0.25-DYMAX-RKG
1/4 (6.35)
1/4 (6.35)
1/2 (12.7)
5x10 (1.5x3.0)
1/4 (6.35)
3/8 (9.65)
5/8 (16.0)
5x10 (1.5x3.0)
3/8 (9.65)
1/4 (6.35)
5/8 (16.0)
5x10 (1.5x3.0)
3/8 (9.65)
3/8 (9.65)
3/4 (19.0)
5x10 (1.5x3.0)
3/8 (9.65)
1/2 (12.7)
7/8 (22.2)
Finishing Welding Wire
DX-WRE-CC-DYMAX-RKG
Sold as complete wire spools for wire feed welders
PLS Call
DYMAXMINING
TOOLS
DYMAXRAIL
TOOLS ANDWORK
MACHINES
www.DYMAXMINING.com
page 5
7
ROK·GÄARD™ BUCKETS
US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
ROK·GÄARD™ SEVERE DUTY BUCKETS - EXCAVATORS/SHOVELS
Dymax ROK·GÄARD™ Severe Duty Buckets
for Hydraulic Excavators are top-notch. Don’t
settle for those standard OEM offerings when your
applications demand a certain toughness. Dymax
ROK·GÄARD™ Severe Duty Buckets deliver the
highest-wear service life and can be custom-built
to match your applications.
Standard Features
ROK·GÄARD™ chromium carbide plating installed on
complete bucket interior (moldboard and side plates)
complete underside exterior of bucket
Includes weld-on adapters and tips
AR400/Hardox 400 side cutters with ROK·GÄARD™ carbide
armor overlay on front side of cutter bar
Exterior ROK·GÄARD™ side wear plates
Optional Features
Weld-on or mechanically attached lip shrouds and
weld-on radius heel shrouds, white iron wear blocks
and chocky bars
Weld-on or mechanically attached side bar protectors
ROK·GÄARD™ carbide overlay is fused to
the leading side-cutter edge. Optional
weld-on or mechanically attached side
bar protectors available upon request are
fitted over the carbide overlay.
8
Wear Plates
ROK·GÄARD™ armor plating covers entire
bucket assembly bottom, doubling
and sometimes tripling life in certain
applications compared to 400-type steels.
Side Wear
ROK·GÄARD™ armor plating covers
heel region. Optional weld-on cast heel
shrouds available upon request.
DMC212012
MODELS AND SPECS
Dymax Model #
Description / Width x Capacity (in x cyd - m x m3)
Weight
lb
Weight
kg
DX-BK-RK-30x1.13-HX-36T
Bucket, Rock ROK·GÄARD™ (30 x 1.13 - 0.76 x 0.86)
3650
1656
3800
1724
4000
1814
4250
1928
4600
2087
ROK·GÄARD™ Plating Details for 36T buckets: Interior: 1/8 on 1/4 Exterior Side: 1/8 on 1/4 Exterior: 3/8 on 3/8
DX-BK-RKRG-30x1.63-HX-45T
4500
2041
4800
2177
5350
2427
5900
2676
DX-BK-RKRG-60X3.25-HX-45T
6400
2903
6190
2808
5660
2567
7000
3175
DX-BK-RKRG-54X2.25-HX-65T
6100
2767
8800
3992
9000
4082
6800
3084
7800
3538
8400
3810
9900
4491
10800
4899
12500
5670
ROK·GÄARD™ Plating Details for 85T buckets: Interior: 1/8 on 1/4 Exterior Side: 1/4 on 1/4 Exterior Bottom : 3/8 on 3/8
DX-BK-RKRG-84x6.80-HXM-120T
14250
6464
15800
7167
18410
8351
ROK·GÄARD™ Plating Details for 120T buckets: Interior: 1/8 on 1/4 Exterior Side: 1/4 on 1/4 Exterior Bottom: 3/8 on 3/8
29500
13381
31800
14424
ROK·GÄARD™ Plating Details for 200T buckets: Interior: 1/8 on 1/4 Exterior Side: 3/8 on 3/8 Exterior Bottom: 3/8 on 3/8
PLS 401
www.DYMAXMINING.com
DYMAXMINING
TOOLS
DYMAXRAIL
TOOLS ANDWORK
MACHINES
page 5
9
ROK·GÄARD™ DOZER BLADES
US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
ROK·GÄARD™ U-BLADES - TRACK DOZER
Dymax ROK·GÄARD™ U-Blades
in some applications will triple blade life. Dymax
ROK·GÄARD™ U-Blades feature standard 28° wing
angles and come armor plated ready for work.
Includes all machine mounting ears and bushings,
trunnions are used where applicable for fitting
factory push group arrangements.
Standard Features
ROK·GÄARD™ chromium carbide plating installed on entire
moldboard in eight-piece pattern. All seams are full weld
filled/ROK·GÄARD™ final pass weld
exterior heel plate and side plate region
Includes replaceable bolt-on cutting edges - OEM pattern
AR400/Hardox 400 side cutters with replaceable side bar
protectors
Optional Features
White iron wear blocks and chocky bars
Vertical Slat Guard
installed on all ROK·GÄARD™ HDU
moldboards. Reclamation models
feature solid moldboard
(no vertical slat guarding).
Reclamation Blade - ROK·GÄARD™ in some
applications can triple blade life.
Side Cutters
ROK·GÄARD™ carbide overlay is fused to
the side-cutter edge. Optional
weld- on or mechanically attached side
bar protectors available upon request.
10
ROK·GÄARD™ Lined
Longer-lasting performance.
Up to four times better wear resistance
compared to traditional 400 and 500
wear plating.
DMC212012
MODELS AND SPECS
Dymax Model #
Description/Capacity x Width (cyd x ft - m3 x m)
Weight
lb
Weight
kg
ROK·GÄARD™ Heavy-Duty U-Blades
DX-BL-HDURG-20.00x14ft-TD-30
Blade, Heavy Duty U ROK·GÄARD™ (20.00 x 14 - 15.29 x 4.27)
9680
4391
14500
6577
17800
8074
32000
14515
ROK·GÄARD™ Reclamation U-Blades
DX-BL-RCRG-22.00X16ft-TD-30
Blade, Reclamation ROK·GÄARD™ (22.00 x 16 - 16.82 x 4.88)
9800
4445
DX-BL-RCRG-30.00x17ft-TD-40
14500
6577
17500
7938
29500
13381
31600
14333
32500
14742
All Dymax Dozer U-Blades are sized using the SAE J1265 rating. For capacities and widths not listed,
please contact Dymax sales for more information. All Dymax products are available to meet your requirements
through our custom products group.
DYMAXMINING
TOOLS
DYMAXRAIL
TOOLS ANDWORK
MACHINES
PLS 402, 403
www.DYMAXMINING.com
page 5
11
TRACK/WHEEL DOZERS
US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
COAL U-BLADES FOR TRACK AND WHEEL DOZERS
Dymax Coal U-Blades
for Track and Wheel Dozers are built upon a family
heritage that dates back to the 1960’s. Our family
pioneered the use of large oversized U-blades for
pushing stockpiled coal. Available for all brands of
machines, Dymax Coal U-Blades feature the highest
quality.
Standard Features
Heavy-Duty Rock Guard
Replaceable OEM bolt-on cutting edges and end bits,
replaceable side bar protection
28° wing angles
Optional Features
ROK·GÄARD™ Armor Wear Package
Hardox/AR400 and 500 Wear Package
Dymax Model #
Weight
lb
Weight
kg
Wheel Dozer Models
12
DX-BL-CL-21.00x16ft-WD-10
Blade, Coal (21.00 x 16 - 16.06 x 4.88)
8000
3629
Blade, Coal (29.00 x 19 - 22.17 x 5.79)
11000
4989
Blade, Coal (40.00 x 20 - 30.58 x 6.10)
16000
7257
Blade, Coal (50.00 x 22 - 38.23 x 6.71)
19150
8686
Blade, Coal (65.00 x 23 - 49.70 x 7.01)
20500
9299
Blade, Coal (70.00 x 23 - 53.52 x 7.01)
21500
9752
DX-BL-CL-12.50x14ft-TD-10
Blade, Coal (12.50 x 14 - 9.56 x 4.27)
3500
1588
Blade, Coal (22.00 x 16 - 16.82 x 4.88)
5500
2495
Blade, Coal (28.80 x 18 - 22.02 x 5.49)
8400
3810
Blade, Coal (40.00 x 19 - 30.58 x 5.79)
9900
4491
Blade, Coal (48.00 x 19 - 36.70 x 5.79)
10500
4763
Blade, Coal (60.00 x 20 - 45.87 x 6.10)
1400
635
Blade, Coal (68.00 x 21 - 51.99 x 6.40)
14800
6713
Blade, Coal (90.00 x 24 - 68.81 x 7.32)
24000
10886
Blade, Coal (98.00 x 25 - 74.93 x 7.62)
25500
11567
Track Dozer Models
All Dymax Dozer U-Blades are sized using the SAE J1265 rating. For specialty liners such as stainless steel or capacities
and widths not listed, please contact Dymax sales for more information. All Dymax products are available to meet your
requirements through our custom products group.
PLS 404
DMC212012
TRACK/WHEEL DOZERS
HEAVY DUTY U-BLADES FOR TRACK DOZERS
Designed for severe-duty applications with AR400, AR500
or ROK·GÄARD™ wear plates. Features top rack and cylinder
guards. Wing angles 28° to 30° to increase penetration
capability, and teardrop end bits allow quicker digging to fill
the blade.
Dymax Heavy Duty U-Blades can be found working in
Iceland, Northern Europe, South America, Africa and North
America, where they outlast and outperform competing
products. In certain applications, when outfitted with
Dymax’s exclusive ROK·GÄARD™ Chromium Carbide Armor,
you can double your life expectancy and increase your
bottom line.
Standard Features
Heavy-Duty Top Rack
Replaceable OEM bolt-on cutting edges and teardrop end
bits, replaceable side bar protection
28° wing angles
Optional Features
Weight
kg
Blade, Heavy Duty U (8.75 x 11 - 6.69 x 3.35)
4600
2087
DX-BL-HDU-10.00x12ft-TD-10
6500
2948
DX-BL-HDU-LINER.RKG-TD-40
DX-BL-HDU-LINER.400-TD-40
Blade, Heavy Duty U, ROK·GÄARD™ moldboard liner
Blade, Heavy Duty U, Hardox/AR400 moldboard liner
8900
4037
12500
5670
15800
7167
29600
13426
All Dymax Dozer U-Blades are sized using the SAE J1265 rating. For capacities and widths not listed, please contact
Dymax sales for more information. All Dymax products are available to meet your requirements through our
custom products group.
PLS 405
www.DYMAXMINING.com
DYMAXMINING
TOOLS
DYMAXRAIL
TOOLS ANDWORK
MACHINES
Weight
lb
Dymax Model #
page 5
13
TRACK/WHEEL DOZERS
US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
RECLAMATION U-BLADES FOR TRACK DOZERS
A Dymax Reclamation U-Blade can increase your
production rates and maximize your bottom line.
Compared to standard conventional moldboards,
the Dymax Reclamation U-Blade can increase
production up to 25% and can also be equipped
with special wear packages to outlast those factory
blade groups.
Ideal for slot dozing and general reclamation found
throughout the coal mining industry.
Standard Features
Replaceable OEM bolt on cutting edges and end bits
30-degree wing angles
Heavy-duty triple box beam construction
Set up with OEM bushings, trunnions where applicable
Optional Features
Replaceable side cutter bar wear protection
14
Weight
lb
Weight
kg
Blade, Reclamation (10.46 x 12 - 8.00 x 3.66)
3800
1724
DX-BL-RC-15.00x14ft-TD-20
6000
2722
DX-BL-RC-22.00X16FT-TD-30
8400
3810
DX-BL-RC-LINER.RKG-TD-40
DX-BL-RC-LINER.400-TD-40
DX-BL-RC-LINER.ARCO-TD-40
Blade, Reclamation, ROK·GÄARD™ moldboard liner
Blade, Reclamation, Hardox/AR400 moldboard liner
Blade, Reclamation, moldboard liner
11000
4989
DX-BL-RC-LINER.ARCO-TD-50
Blade, Reclamation, moldboard liner
15800
7167
25,300
27,000
28,500
11476
12247
12927
Dymax Model #
All Dymax Dozer U-Blades are sized using the SAE J1265 rating. For capacities and widths not listed, please
contact Dymax sales for more information. All Dymax products are available to meet your requirements
PLS 406
DMC212012
TRACK/WHEEL DOZERS
SEMI U-BLADES FOR TRACK AND WHEEL DOZERS
Reliable. Tough. Peformance.
Dymax Semi U-Blades are ideal for equipping new
machinery or replacing worn out factory Semi
U-Blades. Like all Dymax dozer blades, Dymax
Semi U-Blades are available in custom widths,
capacities and heights and can be built to match
your application requirements.
Dymax Semi U-Blades - dependable, proven and
working on multiple continents.
Standard Features
Replaceable OEM bolt-on cutting edges and end bits
Optional Features
Hardox/AR400 Wear Package
Replaceable side cutter bar wear protection
Weight
lb
Weight
kg
Wheel Dozers
DX-BL-SU-24.90x20ft-WD-30
Blade, Semi-U (24.90 x 20 - 19.04 x 6.10)
11000
4989
Blade, Semi-U (30.00 x 21 - 22.94 x 6.40)
16500
7484
Blade, Semi-U (35.00 x 21 - 26.76 x 6.40)
17500
7938
DX-BL-SU-7.50x11ft-TD-10
Blade, Semi-U (7.50 x 11 - 5.73 x 3.35)
3100
1406
Blade, Semi-U (7.80 x 12 - 5.96 x 3.66)
4000
1814
Blade, Semi-U (13.50 x 14 - 10.32 x 4.27)
7500
3402
Blade, Semi-U (17.70 x 14 - 13.53 x 4.27)
9800
4445
DX-BL-SU-LINER.RKG-TD-50
DX-BL-SU-LINER.400-TD-50
Blade, Semi-U (24.20 x 16 - 18.50 x 4.88)
Blade, Semi-U, ROK·GÄARD™ moldboard liner
Blade, Semi-U, Hardox/AR400 moldboard liner
15500
7031
DX-BL-SU-LINER.RKG-TD-60
Blade, Semi-U (35.50 x 19 - 27.14 x 5.79)
Blade, Semi-U (36.00 x 20 - 27.52 x 6.10)
Blade, Semi-U, ROK·GÄARD™ moldboard liner
24000
26000
10886
11793
Track Dozers
All Dymax Dozer SU-Blades are sized using the SAE J1265 rating. For capacities and widths not listed, please
PLS 407, 408
www.DYMAXMINING.com
DYMAXMINING
TOOLS
DYMAXRAIL
TOOLS ANDWORK
MACHINES
Dymax Model #
page 5
15
TRACK/WHEEL DOZERS
US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
CENTERMAX™ BLADES FOR TRACK DOZERS
Dymax Centermax™ Dozer Blades for Track Dozers provide
superior load retention, allowing operators to minimize
side spills. The conical-shaped moldboard delivers
material to the center of the push and maximizes capacity.
The Centermax™ Dozer Blade grades like a conventional
straight or semi u-blade but delivers greater amounts of
material, acting like a U-Blade. Add a stainless steel liner
for work in sticky or caustic materials.
Standard Features
Extended side wings to trap material, almost
eliminating side spill
Optional Features
Stainless steel liner
16
Weight
lb
Weight
kg
Blade, CenterMax™ (7.50 x 11 - 5.73 x 3.35)
3100
1406
DX-BL-CMAX-9.00x14ft-TD-10
3400
1542
4500
2041
6400
2903
7000
3175
7500
3402
Dymax Model #
PLS 409
DMC212012
TRACK/WHEEL DOZERS
COAL SCOOPS FOR WHEEL DOZERS
Dymax Coal Scoops are built to provide years of productive
use and service. Dymax welders take special pride in
building each Coal Scoop so that it will exceed customers’
expectations.
Ideal for coal facilities feeding hoppers, Dymax Coal Scoops
deliver more material per pass and hold up in
around-the-clock operations.
Each model is provided with an H-Frame assembly and
Scoop assembly. H-Frames are provided with Scoop
dump cylinders and rear H-Frame tilt cylinders. Machine
modifications are required for accommodating the Dymax
Coal Scoop. Available for all brands of machines. Contact
Dymax sales for modifications required for your machine.
Weight
kg
Blade, Coal Scoop (35.00 x 14 - 26.76 x 4.27)
15000
6804
DX-BL-CLSC-50.00x17ft-WD-20
19500
8845
20500
9299
Coal Scoops are provided with H-frame, tipping cylinder rams and the scoop bucket/blade assembly. Machines require modifications. Please
contact Dymax sales to determine your machine requirements for operating a Dymax Coal Scoop.
PLS 410
www.DYMAXMINING.com
DYMAXMINING
TOOLS
DYMAXRAIL
TOOLS ANDWORK
MACHINES
Weight
lb
Dymax Model #
page 5
17
TRACK/WHEEL DOZERS
US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
COAL BOWLDOZERS FOR WHEEL DOZERS
Retain loads, feed hoppers
Dymax Bowldozers feature heavy-duty
construction and excellent control of the load.
With two (2) cutting edges and an open floor,
operators can keep a lively load when dozing. The
long and high side boards trap the material, similar
to “slot-dozing” without the slot.
Dymax Bowldozers were developed by the
Balderson family in the early 1960’s. New materials
make them more productive than ever.
Standard Features
Two-cutting-edge system with open floor
Box construction side boards
Replaceable OEM cutting edges
Set up with OEM bushings, trunnions where
applicable
18
Weight
lb
Weight
kg
Blade, Bowldozer Coal (28.00 x 15 - 21.41 x 4.57)
11880
5389
Blade, Bowldozer Coal (39.00 x 18 - 29.82 x 5.49)
13800
6260
Dymax Model #
DX-BL-BDCL-28.00x15ft-WD-20
DX-BL-BDCL-39.00x18ft-WD-30
All Dymax Dozer U-Blades are sized using the SAE J1265 rating. For capacities and widths not listed, please
PLS 411
DMC212012
SUCCESS STORY
DYMAX ROK·GÄARD™ - SUCCESS
DYMAX ROK·GÄARD™
Hardness is Not the Same as Wear Resistance.
Dymax ROK·GÄARD™ Chromium Carbide Armor is the
proprietary name for the process used by Dymax to
provide the toughest chromium carbide overlay plate for
critical abrasion resistance in severe applications. Not
all chromium carbide overlay plate is the same. Dymax
ROK·GÄARD™ Chromium Carbide Armor is manufactured
to Dymax specifications. Dymax engineers utilize their
knowledge and decades of experience to make sure that
each customer’s ROK·GÄARD™ wear plates match the
individual customer applications.
Popular hardness measures, such as Brinel and Rockwell,
measure the macro hardness of a material. An alloy
steel hardness measure becomes the combined average
of each metallurgical component in the alloy. Wear
resistance is best measured by a wear test such as ASTM
G65.
Not all wear materials are equal. Let Dymax help you
decide what is right for you.
Is your application one with severe abrasion but sticky
material? Or are you working in clay and other wet
conditions but face mild wear conditions? Dymax
engineers examine these kinds of elements before
determining the best wear material for your job. Some
situations call for Hardox 400 or Hardox 500. More
severe applications require Dymax ROK·GÄARD™
Chromium Carbide Armor. And there are other uses
where abrasion is absent and stainless steel liners are the
path to improved productivity.
Low stress and/or scratching abrasion is the most
predominant test in the mining industry. The ASTM G65
test is a dry sand rubber wheel test. It rates materials in
terms of weight loss under a controlled set of laboratory
conditions. Obviously, other factors in the mine may
influence ultimate wear, such as impacts, corrosion and
other elements. Dymax engineers are ready to help
you determine what the best wear protection is for your
application.
Dymax: The Trusted Source of Wear Plate Expertise
DYMAXMINING
TOOLS
DYMAXRAIL
TOOLS ANDWORK
MACHINES
30,000 hours +
This Dymax Reclamation U-Blade
has clocked just over 30,000
working hours.
www.DYMAXMINING.com
page 5
19
WHEEL LOADER
US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
HEAVY DUTY HORIZONTAL PIN LOCK QUICK COUPLERS
Dymax Heavy Duty Horizontal Pin Lock Quick
Coupler systems allow mining and quarrying
operations to change from bucket to fork to
blade in minutes.
Class 90 and Class 100 models feature a
6-inch diameter top tube assembly, while Class
110 and 120 models feature a 9-inch top tube
assembly.
Hydraulic kits are sold separately. Contact
Dymax for more information and details
concerning hydraulic kits.
Weight
lb
Weight
kg
Quick Coupler, Hydraulic, DHLP - Dymax Horiz. Pin Coupler
2500
1134
DX-QC-HY-DHLP-WL-100
4180
1896
6400
2903
6400
2903
Dymax Model #
Description
DX-QC-HY-DHLP-WL-90
PLS 412
BLOCK HANDLING WEDGE LOCK QUICK COUPLERS
20
Dymax Block Handling Quick Couplers for wheel
loaders are designed to utilize the maximum
lifting and breakout capacity of the given
machine.
Equipped with either two or four heavy-duty
locking cylinders, the Dymax Block Handling
Quick Coupler features heavy-duty construction
to provide long life in quarry environments.
Models can be set up with a visibility window to
increase operator visibility when handling large
rocks and blocks.
Weight
lb
Weight
kg
Quick Coupler, Block Handling, Block Handling - Wedge Lock
2250
1021
DX-QC-BH-WG-WL-100
2900
1315
DX-QC-BH-WG-WL-110
6000
2722
DX-QC-BH-WG-WL-120
6000
2722
Dymax Model #
Description
DX-QC-BH-WG-WL-90
PLS 413
DMC212012
SUCCESS STORY
SPECIALTY COUPLER SYSTEMS - GET ONE IF YOU NEED IT
Dymax engineers are always hard at work developing
new technologies and helping customers do jobs more
easily, more safely and more economically. In 2011,
Dymax developed the all-new 180° rotational coupler
system that delivers 90° hydraulic rotation to the left
and right.
An application at a copper facility in Pakistan required
a special coupler that would allow the customer to
dump material to the side using a conventional wheel
loader. The customer was needing to dump material to
the side from its specialty boom/fork due to tight space
restraints. Dymax was contacted and in 2011 delivered
to Pakistan the 180° rotational coupler system. This
specific model fit an existing loader and euro-coupler
and then was fitted with a manual locking euro-coupler
on the front side.
Let us help with your special work tool needs.
DYMAXMINING
TOOLS
DYMAXRAIL
TOOLS ANDWORK
MACHINES
www.DYMAXMINING.com
page 5
21
WHEEL LOADER
US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
SPADE NOSE ROCK BUCKETS
Dymax Spade Nose Rock Buckets are known for meeting
production requirements at mines while providing years
of service. With 4 generations of meeting customer needs,
Dymax Spade Nose Rock Buckets are crafted for each
customer as if it were our only customer. Dymax engineering
matches machine potential to a properly sized bucket for the
application and material weight, creating job harmony.
Standard Features
Spade-nose cutting edge equipped with weld-on
adapters and tips. Cat, Esco, Hensley and Futura
Includes top auxiliary spill plate/rock guard
Tire protection/exterior Rock Wings
Heavy-duty AR400 side cutters
T1 steel moldboard group without liner
DX-BK-SPDRK-WHIRON
Optional white Iron wear blocks
Optional Features
Hardox/AR400 Wear Package
Cutting edge segments and lip shrouds
Side bar protector shrouds
White iron wear blocks
Bottom Wear Plating
Standard feature
22
DX-BK-SPDRK-LINER
Optional AR400, AR500
and ROK·GÄARD™
DX-BK-SPDRK-SEGMENTS
DX-BK-SPDRK-LSHROUDS
Optional cutting edge segments and
lip shrouds
DX-BK-SPDRK-SSHROUDS
Optional Side Bar Protector Shrouds
Rock Wings/Tire Protectors
Standard feature
Weld-On Adapter/Tips
Standard feature
DMC212012
WHEEL LOADER
MODELS AND SPECS
Description/Capacity (cyd -m3)
Weight
lb
Weight
kg
DX-BK-SPDRK-6.00cyd-WL-90
Bucket, Spade Nose Rock (6.00 - 4.59)
7660
3474
7980
3620
8500
3856
DX-BK-SPDRK-LINER.RKG-WL-90
DX-BK-SPDRK-LSHROUDS-WL-90
DX-BK-SPDRK-SEGMENT-WL-90
DX-BK-SPDRK-SSHROUDS-WL-90
DX-BK-SPDRK-WHIRON-WL-90
DX-BK-SPDRK-LINER.400-WL-90
Bucket, Spade Nose Rock, ROK·GÄARD™ moldboard liner
Bucket, Spade Nose Rock, Lip Shrouds
Bucket, Spade Nose Rock, Cutting edge segments
Bucket, Spade Nose Rock, Side bar protector shrouds
Bucket, Spade Nose Rock, White iron wear blocks
Bucket, Spade Nose Rock, Hardox/AR400 moldboard liner
10930
4958
12275
5568
13620
6178
13900
6305
16200
7348
17600
7983
22500
10206
22900
10387
23650
10727
24000
10886
25000
11340
39000
17690
40000
18144
41600
18869
43000
19504
Bolt-on cutting edge segments
Side Bar Protector Shrouds
Weld-on or Mechanically Attached Lip Shrouds
White Iron Wear Block Package
Hardox 400 liner system
ROK·GÄARD™ Carbide Armor Liner System
All Dymax Spade Nose Rock Buckets are equipped with weld-on adapters and tips and feature Rock Wings installed on exterior side plates for tire
protection. Optional wear items are listed. For straight-edge bucket models or for any capacities or custom design requirements not listed, please
contact Dymax sales. Bucket capacities are rated as SAE heap.
PLS 414
www.DYMAXMINING.com
DYMAXMINING
TOOLS
DYMAXRAIL
TOOLS ANDWORK
MACHINES
Dymax Model #
page 5
23
WHEEL LOADER
US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
COAL BUCKETS - STOCKPILE AND SEAM LOADING
Bigger, Better Buckets
Dymax Coal Handling Buckets are built to provide years
of productive use and are backed by the best service
in the industry. Available in stockpile or seam loading
designs. Stockpile models feature replaceable OEM
bolt-on cutting edges, while seam loading models
traditionally feature sharp-point teeth.
Stockpile loading model
featuring bolt-on cutting edges
Side Cutter Protection
Optional bolt-on wear shrouds
installed on side cutter bars for
buckets loading either in stockpile
or seam applications.
24
Cutting Edge Systems
Models can be equipped with
bolt-on cutting edges, teeth,
segments and other wear
protection.
DMC212012
WHEEL LOADER
MODELS AND SPECS
Dymax Model #
Weight
lb
Weight
kg
Coal Stockpile Models
DX-BK-CL-7.50cyd-WL-80
Bucket, Coal (7.50 - 5.73)
5100
2313
Bucket, Coal (8.00 - 6.12)
5300
2404
Bucket, Coal (8.50 - 6.50)
5500
2495
Bucket, Coal (9.00 - 6.88)
5790
2626
Bucket, Coal (9.50 - 7.26)
6080
2758
Bucket, Coal (14.00 - 10.70)
11200
5080
Bucket, Coal (15.00 - 11.47)
11800
5352
Bucket, Coal (18.00 - 13.76)
14800
6713
Bucket, Coal (20.00 - 15.29)
16000
7257
Bucket, Coal (22.00 - 16.82)
17099
7756
Bucket, Coal (25.00 - 19.11)
19680
8927
Bucket, Coal (26.00 - 19.88)
20200
9163
Bucket, Coal (28.00 - 21.41)
21588
9792
Bucket, Coal (30.00 - 22.94)
24500
11113
Bucket, Coal (32.00 - 24.47)
28000
12700
Bucket, Coal (40.00 - 30.58)
44500
20186
Bucket, Coal (42.00 - 32.11)
46800
21228
Bucket, Coal (45.00 - 34.41)
48500
22000
DX-BK-CLSM-12.50cyd-WL-110
Bucket, Coal Seam Loading (12.50 - 9.56)
15200
6895
DX-BK-CLSM-18.00cyd-WL-120
Bucket, Coal Seam Loading (18.00 - 13.76)
27100
12292
Coal Seam Loading Models
All Coal Buckets are equipped with choice of bolt-on cutting edge or weld-on adapters and tips. Optional wear items are listed.
For straight-edge bucket models or for any capacities or custom design requirements not listed, please contact Dymax sales.
Bucket capacities are rated as SAE heap.
PLS 415, 416
Coal Seam Bucket
working in Texas lignite mining applications
www.DYMAXMINING.com
DYMAXMINING
TOOLS
DYMAXRAIL
TOOLS ANDWORK
MACHINES
page 5
25
WHEEL LOADER
SIDE DUMP - TWO-WAY DUMP BUCKETS FOR WHEEL LOADERS
Dump Forward, Dump Right, Dump Left
Dymax Side Dump - Two-Way Dump Buckets have the
ability to dump forward, right or left. Ideally suited for
rock handling in tunnel applications. In order for an
operator to change dump sides all that is required is
removal of a single pin and placing it on the opposing
side. Design is well tested worldwide and often used in
dam construction and other rock tunneling operations.
Tough Steel
Dymax Three-Way Side Dump Buckets
feature AR400/T1 and other highabrasion-resistant steels, providing long
service life and lower maintenance
Cutting-Edge Systems
Standard models feature
replaceable teeth and edge
segments/shrouds installed.
26
Heavy-Duty Corners
Heavy-duty corners feature
additional wear support and are
composed of AR400 steels
Weight
lb
Weight
kg
Bucket, Dual Side Dump (R/L) (4.00 - 3.06)
6200
2812
DX-BK-2SD-5.50cyd-WL-90
9000
4082
10000
4536
Dymax Model #
All Three-Way Side Dump Buckets are equipped with weld-on adapters, tips and edge segments. Contact Dymax sales for information
concerning wear liners and other wear protection. If you require a different capacity, contact Dymax sales.
PLS 417
DMC212012
WHEEL LOADER
SKELETON ROCK BUCKETS FOR WHEEL LOADERS
Dymax Skeleton Rock Buckets feature spacing between
steel ribs that allows the buckets to retain larger-sized
rocks while sifting fine material.
High-strength, abrasion-resistant steel construction
resists impact and abrasion from demanding job sites.
Ideal applications include heavy-duty rock handling in
quarries and dam sites or in stockpile applications.
Tine Spacing
Standard models feature 10 to 12-tine
spacing. Specialty tine spacings are
available upon request to meet your
requirements
Cutting-Edge Systems
Available with bolt-on cutting edges or
with weld-on adapters and tips.
Weight
lb
Weight
kg
DX-BK-SR-4.00cyd-WL-60
Bucket, Skeleton Rock (4.00 - 3.06)
4570
2073
6240
2830
6500
2948
6910
3134
6700
3039
7000
3175
7430
3370
7790
3533
11800
5352
12400
5625
All Dymax Skeleton Rock Buckets are equipped with choice of bolt-on cutting edge or weld-on adapters and tips. Optional wear items are
listed. For straight-edge bucket models or for any capacities or custom design requirements not listed, please contact Dymax sales.
Bucket capacities are rated as SAE heap.
PLS 418
www.DYMAXMINING.com
DYMAXMINING
TOOLS
DYMAXRAIL
TOOLS ANDWORK
MACHINES
Dymax Model #
page 5
27
WHEEL LOADER
US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
MATERIAL HANDLING ARMS/BOOMS FOR WHEEL LOADERS
Dymax Material Handling Arms for wheel loaders and tool
carriers are available in a two-piece manual extension model.
Fixed models are also available upon request.
Dymax Material Handling Arms can be designed to pin
directly to the machine or equipped with coupler hooks
to work with the Dymax coupler system or other popular
coupler models.
Available for most machine makes and models, the Dymax
Material Handling Arm is ideal for placing objects in desired
positions. Clevis and lifting hooks are sold separately upon
request.
28
Weight
lb
Weight
kg
Material Handling Arm, Manual Extension (8 x 13 - 2.44 x 3.96)
1500
680
DX-MH-MLEX-9ftx14ft-WL-70
2200
998
2650
1202
3580
1624
Dymax Model #
Description/Retracted x extended (ft x ft - m x m)
For specialty booms, please contact Dymax sales for more information. Dymax custom products group can design a purpose built material
handling arm to match your job requirements.
PLS 419, 421
DMC212012
WHEEL LOADER
HEAVY-DUTY PALLET FORKS FOR WHEEL LOADERS
Dymax Pallet Forks for large wheel loaders are ideal for
mine sites and quarrying operations.
Dymax Pallet Forks provide a convenient alternative
to a dedicated forklift and are available for all machine
brands and models.
Pallet forks with shaft-mounted tines. Standard
models feature manual-adjusting, non-swing tines.
Hydraulic-adjusting tine forks
Dymax Model #
Description/Tine Length x Carriage/Capacity
(in x in, in x in, - m x m, cm x cm)
Weight
lb
Weight
kg
DX-FK-PTS-72inx110in-WL-90
Fork, Pallet, Shaft Mount (72 x 110, 3.25 x 8.00, 48,800lb 1.83 x 2.79, 8.26 x 20.32, 22,182kg)
4400
1996
4580
2077
4700
2132
4615
2093
4700
2132
5200
2359
Hydraulic Adjustable Tine Models
DX-FK-PTHT-84inx96in-WL-80
Pallet, Hydraulic Adjustable Tine (84 x 96, 3.00 x 7.00, 34,200lb 2.13 x 2.44, 7.62 x 17.78, 15,545kg)
3350
1520
3500
1588
3200
1452
Dymax offers many Pallet Forks not listed in these pages. For custom sizes and capacities to meet your requirements, please contact Dymax
custom products group. Let us know your requirements or special application needs.
PLS 426
www.DYMAXMINING.com
DYMAXMINING
TOOLS
DYMAXRAIL
TOOLS ANDWORK
MACHINES
Shaft-Mounted Tine Models
page 5
29
WHEEL LOADER
US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
BLOCK HANDLING FORKS FOR WHEEL LOADERS
Dymax Heavy-Duty Block Handling Forks are built to provide
years of productive use and are backed by the best service in
the industry.
Dymax Heavy-Duty Block Handling Forks feature shaftmount tines that can be fixed in any given position to match
your application. Certain models feature minimal tine
adjustability. The shaft-mount tines can easily be replaced.
Optional weld-on tines are available if specified.
Ideally suited for handling blocks of stone in quarry and
mining applications.
Tines are available in welded
or shaft mount
30
Dymax Model #
Description/Tine Length x Carriage/Capacity
(in x in, in x in, - m x m, cm x cm)
Weight Weight
lb
kg
DX-FK-BH-60inX60in-WL-70
Fork, Block Handling (60 x 60, 3.50 x 8.00, 54,600lb - 1.52 x 1.52, 8.89 x 20.32, 24,818kg)
2650
1202
DX-FK-BH-72inx60in-WL-70
2810
1275
2750
1248
3580
1624
4800
2177
5280
2395
6800
3084
5200
2359
5500
2495
6120
2776
8000
3628
9800
4446
For specialty Block Handling Forks, please contact Dymax sales for more information. Dymax custom products group can design
a purpose-built Block Handling Fork to meet your application requirements.
PLS 426
DMC212012
SUCCESS STORY
CONVEYOR BELT SHEARING SYSTEMS FOR LOADERS, EXCAVATORS
In 2001, a coal mine in Texas needed a solution to get
its workers out of harm’s way. The coal mine had miles
and miles of old steel-corded rubber belting and needed
a quick, effective solution for cutting it down to size.
Prior to engaging with the Dymax custom products
group, the workers used heavy, 80-lb saws to cut the
belt. Not only was this dangerous, it was also highly time
consuming, taking 20 minutes at times to make a single
cut. Inhalation of rubber and smoke also posed health
and safety risks.
Dymax was approached to develop a belt shear that
worked with a conventional loader, excavator or
telehandler. The result was excellent. A hydraulicpower-fed roller system engaged the belt and pulled
it into the shearing mechanism. Indexable demolition
shearing knives sliced through the 1.5-2-meter wide
belts in under 60 seconds. The mine was finally able to
cut belt into smaller pieces and sell the pieces to local
feedlots and ranchers, where it was used for walkway
and bedding material.
DYMAXMINING
TOOLS
DYMAXRAIL
TOOLS ANDWORK
MACHINES
A fun and exciting project left mine workers smiling at
day’s end. Photo taken in 2002 at coal mine in Texas.
www.DYMAXMINING.com
page 5
31
EXCAVATOR/SHOVEL
US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
ROCK & MASS EXCAVATION BUCKETS FOR MINING BACKHOES
Dymax Rock and Mass Excavation Buckets for
Mining Backhoes are proven in worldwide mining
operations.
“We have a mine customer in the far reaches of
Siberia who prefers Dymax Buckets over others,
because they outperform and outlast other brands.
On top of this, Dymax personnel were the first bucket
manufacturer to visit us and our applications. They
are great folks to work with.”
-Sergey Eremin, Scorpion Inc., Kemerovo, Russian Federation.
Brakefield Coal’s Hitachi EX1800 fitted with Dymax 15-yard
Rock Bucket.
Heavy-Duty Top Assembly
Dual-beam top assembly
construction, line bored to fit
OEM tolerances, provided with
all necessary bushings
Hardox 400/500 rear wear
plates combined with Dymax
ROK·GÄARD™ make for the
ultimate in wear protection
32
Up to 6-inch-thick cutting edges
Solid, Hardox 400
side cutters
Optional Dymax
ROK·GÄARD™ Chromium
Carbide liner packages
Available with Esco, Hensley
or other OEM ground
engaging solutions
DMC212012
EXCAVATOR/SHOVEL
MODELS AND SPECS
Weight
kg
Bucket, Rock (30 x 1.63 - 0.76 x 1.25)
3860
1751
Bucket, Rock (42 x 1.88 - 1.07 x 1.44)
4300
1950
Bucket, Rock (48 x 2.25 - 1.22 x 1.72)
4600
2087
Bucket, Rock (54 x 3.00 - 1.37 x 2.29)
5000
2268
DX-BK-RK-60X3.25-HX-45T
Bucket, Rock (60 x 3.25 - 1.53 x 2.48)
5700
2586
DX-BK-RK-54X2.25-HX-65T
Bucket, Rock (54 x 2.25 - 1.38 x 1.72)
5080
2304
Bucket, Rock (72 x 4.50 - 1.83 x 3.44)
7800
3538
Bucket, Rock (36 x 2.70 - 0.91 x 2.06)
5400
2449
Bucket, Rock (42 x 3.30 - 1.07 x 2.52)
6600
2994
Bucket, Rock (48 x 3.90 - 1.22 x 2.98)
8000
3629
Bucket, Rock (54 x 4.60 - 1.37 x 3.52)
8600
3901
Bucket, Rock (84 x 4.90 - 2.13 x 3.75)
9750
4423
DX-BK-RK-84x6.80-HXM-120T
Bucket, Rock (84 x 6.80 - 2.13 x 5.20)
13200
5988
Bucket, Rock (88 x 7.60 - 2.24 x 5.81)
14800
6713
Bucket, Rock (94 x 8.80 - 2.39 x 6.73)
16200
7348
Bucket, Rock (108 x 12.60 - 2.74 x 9.63)
24000
10886
Bucket, Rock (120 x 17.00 - 3.05 x 13.00)
27500
12474
Bucket, Rock (132 x 15.70 - 3.35 x 12.00)
26500
12020
Bucket, Rock (125 x 19.60 - 3.18 x 14.99)
35000
15876
Bucket, Rock (150 x 28.80 - 3.81 x 22.02)
45000
20412
Description/Width x Capacity (in x cyd - m x m3)
Buckets listed represent common models. For capacities and widths not listed, please contact Dymax sales for quotations.
PLS 427
www.DYMAXMINING.com
DYMAXMINING
TOOLS
DYMAXRAIL
TOOLS ANDWORK
MACHINES
Weight
lb
Dymax Model #
page 5
33
EXCAVATOR/SHOVEL
US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
HYDRAULIC BOTTOM DUMP BUCKETS - SHOVELS
34
Weight
lb
Weight
kg
Bucket, Shovel (98 x 7.70 - 2.49 x 5.89)
Bucket, Shovel, ROK·GÄARD™ moldboard liner
Bucket, Shovel, Hardox/AR400 moldboard liner
22000
9979
DX-BK-SHV-110x8.50-HXM-120T
DX-BK-SHV-LINER.RKG-HXM-120T
DX-BK-SHV-LINER.400-HXM-120T
Bucket, Shovel (110 x 8.50 - 2.79 x 6.50)
24000
10886
Bucket, Shovel (135 x 14.40 - 3.43 x 11.01)
34000
15422
Bucket, Shovel (135 x 15.70 - 3.43 x 12.00)
36500
16556
Bucket, Shovel (142 x 19.60 - 3.61 x 14.99)
44000
19958
Dymax Model #
Description/Width x Capacity (in x cyd - m x m3)
Buckets listed represent common models. For capacities and widths not listed, please contact Dymax sales for quotations.
PLS 428
DMC212012
CUSTOM
ENGINEERED-TO-ORDER PRODUCTS - CUSTOM
Dymax is proud to provide our customers with special
application work tools. To help us provide you with
the attachment you need, please provide the following
information. We will then be able to generate a sketch
for you.
Machine brand and series data
Material, weight, characteristics
Describe application
Capacity needed?
Width, height, depth necessary?
Dump clearance restrictions (at 45 degrees)?
Type of cutting edge: straight, v-type, etc.?
Are teeth required? Specific brand?
Quick coupler or pin-on? Which?
Other application data?
Better yet, give us a call and visit with one of our capable
sales engineers about how we can help you.
Dymax Bonus Buckets are ideal for loading sand,
gravel and other aggregates. Designed with the hinge
plates recessed into the bucket, allowing high-capacity
loading in narrow width designs. Ideal for matching
capacity to trailers in specific applications. Call Dymax
sales for more information regarding Dymax Bonus
Buckets, and put the Bonus on your machine.
www.DYMAXMINING.com
DYMAXMINING
TOOLS
DYMAXRAIL
TOOLS ANDWORK
MACHINES
Dymax Custom Booms can be used in many
applications found throughout the mining industry.
Whether you need a clearing rake for pulling rock
loose before hauling with your Dymax Block Fork or a
stockpile boom for compacting and pushing material
to the ceiling in underground mines, Dymax’s custom
products group can design and build your next boom.
Dymax Backhoe Loader Specialty Hammer
Adapter allows customers to use common hammer
models on other machines without re-fitment.
Dymax provides a custom coupler solution with
manual rotation ability, giving operators the ability
to lay the hammer flat on the ground and knock out
dragline pins.
page 5
35
EXCAVATOR
US: 1-800-530-5407
WORLDWIDE: 1-785-456-2081
MINING MACHINERY PARTS GRAPPLES - SAFETY FIRST
Safety is always a top priority in every mine. Handling cumbersome and heavy machinery
pins by hand presents safety and ergonomic challenges.
Dymax pin handling work tools (Pin Handler and Pin Grapple) were developed for a large
mining company in Australia’s Hunter Valley region. Maintenance workers used to change
out drag line clevis pins and track pins by hand. Not only was it a back-breaking job, it posed
many safety risks.
DymaxMining entered the picture with the development of its pin handling grapple and pin
inserter. Now one operator with a mini-excavator can change pins in much less time than
when done manually.
Do you have something you’d like done in your mine to make the job safer and more
productive? Give us a call.
Pin Handler
Fail-safe pin handling. Features built-in pin pusher to start mining
pins in clevis holes. Your workers can now feel safe.
Weight
lb
Weight
kg
Pin Handler, Grapple, 180mm diameter
max rated capacity
390
177
Pin Handler, Grapple, 180mm diameter
max rated capacity
420
191
Dymax Model #
Description/Capacity
DX-PH-GL-180mm-HX-3T
DX-PH-GL-180mm-HX-5T
PLS 429
Pin Grapple
Handle 200mm-diameter pins, chains and other machinery parts using a 3-8T
excavator. No more back-breaking lifting and placing your workers in harm’s way.
Weight
lb
Weight
kg
Rotation Grapple, Hydraulic,
360-degree rotation, 3 Tons
400
181
DX-GL-HY-360-HX-04T
450
204
DX-GL-HY-360-HX-05T
600
274
DX-GL-HY-360-HX-06T
700
318
DX-GL-HY-360-HX-07T
1,200
544
DX-GL-HY-360-HX-08T
1,400
635
Dymax Model #
Description/Capacity
DX-GL-HY-360-HX-03T
PLS 429
DYMAXMINING
402 Miller Drive
P.O. Box 297
Wamego, Kansas 66547
USA
US Toll Free: 1-800-530-5407
Worldwide: +1-785-456-2081
Fax: +1-785-456-8328
Email: sales@DymaxMining.com

dymaxrail tools and machines

Transcription

Similar documents

Why Choose UV?

Vadsö_kulturnaringslivseminarie 080605

Compact Track Loader

Compact Track Loader

ECE UV Light-Curing Flood Lamps User Guide

MODEL LM 1 - Log Master Portable Saw Blade

Curing Equipment Selector Guide

AM/FM is the ONLY band in America (that we know of) that brings

Guide to Selecting and Using DYMAX UV Light Curing Systems

FKN Depaneling Data Sheet

SYC-300M - Leadermac USA