SYC-300M - Leadermac USA

SYC-300M
Multiple Rip Saw
FEATURES:
Cast iron base
Lift Up Sound Enclosure for quieter and
safer rip saw operation
Table and Guide are Hard Chromed
Hydro-loc Outboard Bearing System for
best gang sawing shaft support with
grease gun
Cardan Shaft Drive throughout
All driven rolls – hence a very solid true
drive
Top Rolls are Air Tensioned
Variable Pressure Controls – on top feed
rolls
6 Driven Close Coupled Top feed rollers
4 Driven Bed rollers
Motorized Lift to Top Rolls
Saw spindle has motorized lift and
lowering
Belt Driven Saw Spindle
Saw blades cut from below hence better
Dust Removal and a heavier sturdier
design
Saws are pre-mounted on a slip on
sleeve for quick change.
Anti-Kickback Devices included
Central Lube System
Star-Delta Main Saw motor Starter –
hence lowamperage start
GUARD
OUTBOARD
BEARING
Contact Your LEADERMAC Representative Today For More Details!
Toll Free 1-866-522-6835 Email: sales@leadermacusa.com www.leadermacusa.com
SPECIFICATIONS:
Maximum Thickness: 5" (130 mm)
Note: to 4.5” with std. Fill-in plate, a modified plate will be required for 5” depth
Using
12” blade = 3” Depth
14” blade = 4” Depth
16” blade = 5” Depth
Maximum between Outside Saws: 12" (305 mm)
Minimum length material: 10" (250mm)
Saws: 10" min. to 16" Max Dia. x 70mm Bore (Dble Key)
Spindle: 50 mm dia. with 70 mm keywayed sleeve x 4,000 rpm
Main Motor: std. 50 HP (to 100 HP - optional)
Feed Motor: 7.5 HP with VFD Infinitely Variable Speed Control
Vari-speed feed: 20 to 200 FPM (6 to 60 m/min) optional
Top Feed Rolls: Rise & Fall 1 HP
Mag. Starter and Electrics to UL/CSA
Standards and wired to Stock Machine normally connected 460 volts/3/60
Other 230 or 575 Volt on request
User Friendly Controls
Roller Feed System
Roller Feed Drive with
Pneumatic Hold Down
Powerful Cardan Shaft Drive
(3) Rows of
Anti-Kickback Fingers
Chromed Infeed Table with Moveable
Fence
Contact Your LEADERMAC Representative Today For More Details!
Toll Free 1-866-522-6835 Email: sales@leadermacusa.com www.leadermacusa.com