You can flip through our online catalogue - Scheu

Transcription

Catalogue
2016
Clasps and Bars
Orthodontics
CA® CLEAR ALIGNER
Pressure Moulding Technique
Dental Sleep Medicine
Laboratory Equipment
Clasps
and Bars
J-Clasp
J-Clasp oblique
JM-Clasp
Jaw Fracture Splint
Lingual Bar curved
N-Clasp
N BI-FORM-Clasp
NK-Clasp
O-Clasp
OK-Clasp
PROFI-Bar
SCHEU-Anchor
T-Clasp
TK-Clasp
Orthodontics
20
20
20
21
21
18
18
19
18
18
21
20
19
19
Adams-Clasp
Activator Tubes
Activation Key
Arrow Clasp
BIOPERM-Trimmer
BLUE-BLOKKER®
CARAT® Wire Bending Pliers
CETRON®
CHROMIUM
Coffin-Spring
Diamond Separating Disc
Distance Rings
3D Model Insulation
ECHARRI Templates
Face-Bows
Guiding Bars acc. to R. Hinz
Hinge 44
Hinge System acc. to Herbst
Key for expansion screws
Lingual-/Palatal sheath
24
47
39
24
41
42
52-53
50
28
25
42
43
30
48-49
44-46
25
43
43
39
51
MENZANIUM®
26
Münster Separating Plate
25
Ortho Designs
31
Orthodontic insulating agent
30
Ortho Arch Bender
53
POLYFIX
41
Quad Helix
51
Retainer boxes
49
SCHEU-Anchor
24
Security expansion key
39
Set-Up Products
39-41
Silicone Tubes
31
Spray bottles and
31
Spray nozzles
STEADY-RESIN Acrylic
28-30
Technique and Accessories
Symmetry Measurement Gauge
47
Triangle Clasp
24
U-Bar acc. to Karwetzky
25
VECTOR® Assortment
32-38
CA® CLEAR ALIGNER
Auxiliary Set (4.0) for
CA® Photo Support
CA® Books
CA® Bow CHROMIUM
CA® CHECKER
CA® Coloured Pencils
CA® Cyano Veneer Fast
CA® Distalizer Kit
acc. to Dr. Echarri
CA® FLASH
CA® Foil
CA® Foil A2 pd
CA® Gauge
CA® Grinding Set
and Carbide Bur
CA® Model Holder
59
66
62
58
66
65
61
65
60
60
67
60
59
CA® Photo Support
CA® Pipettes
CA® Plastic Buttons
CA® POWER GRIP
CA® SMART
CA® Splint Case for patients
CA® Stripping Tools
CA® TIP Pliers
ECHARRI PST Set
Fixing block for height adjustment of CA® Photo Support
PST Set Standard
SD-Box
VECTOR® 30
VECTOR® 40
59
65
65
64
58
66
67
63
67
59
67
66
62
61
Contents
Laboratory
Equipment
CLEAR-BLOKKER®
GEORGE GAUGE™
Bite Registration
IST® Kit, HF 5, HF 9, HF 15
IST®-Accessories and
Positioning Support
myTAP™
Occlusion Trainer
OPM
SD-Box
72
71
70
71
73
73
73
72
SD-Cyano Veneer Fast
SD-Metal Primer
SD-Pipettes
TAP® Accessories
TAP® Splint case for patients
TAP® Standard
TAP®-T
TAP®-T Reverse
TAP®-T/TAP®-T Reverse
Starter-Set
72
72
72
74-75
74
74
74
75
75
BIOCRYL® C
BIOCRYL® M
BIOPLAST®
BIOPLAST® bleach
BIOPLAST® Color
BIOPLAST® Multicolor
BIOPLAST® XTREME
BIOPLAST® XTREME Deco
BIOPLAST® XTREME Kit
BIOPLAST® XTREME PRO Kit
BRUX CHECKER®
COPYPLAST®
COPYPLAST® C
DURAN®
DURAN®+
DURAN®+ A2 pd
DURASOFT® pd
DURASOFT® blue pd
DURASOFT® pd seal
HARDCAST®
IMPRELON®
IMPRELON® S pd
ISOFOLAN®
OSAMU-Retainer® Kit
Spacer Foil
78
78
83
83
82
82
81
82
81
81
83
85
85
78
79
79
79
80
80
85
84
84
88
84
88
Accessories
Blocking-out Putty
BIOCRYL®-RESIN
BIOPERM-Trimmer
BIOPLAST® Insulating Agent
BLUE-BLOKKER®
Burs and Cutter
89
90
97
89
88
96
CLEAR-BLOKKER®
DIMO® /DIMO® PRO S
DURASPLINT®
DURASPLINT® LC
Finishing Set
Foam Discs
Impression Tray Handles
LC-Burs
LC-Insulation
LC-Primer
OSAMU-Bond
OSAMU-Polisher
Pellet Cover
Pellet Brush
POLYFIX
SD-Bond
SD-Composite Primer
SD-Cutter
SD-Disc
SD-Felt Wheel
SD-Foil Lifter
SD-Foil Scissors
SD-High-Gloss Polishing Mop
Stainless Steel Pellets
SD-Tray-Remover
SD-Pincers
SD-Polishing Paste
SD-Polishing Brush
SD-Scalpel
SD-Silicon
SIL-KITT
Skin Packaging
91
97
90
91
96
89
94
93
92
91
92
97
95
95
97
86
92
87
87
93
94
94-95
93
95
87
87
93
93
86
86
89
90
BIOSTAR®
Fixators and Mounting Splints
Heating Support
IMPRIMO® 90
LC-6 Light Oven
LC Mini Light
MINISTAR S®
Model Holder
Model Platform
Parallelometer
Sampler of Pressure Moulding
TWINSTAR® P
TWINSTAR® V
103
100
102
106
102
102
104
101
102
100
101
104
105
105
Appendixes:
indication chart, material lists,
measuring units, numerical directory
1940
1930
1960
1950
1926
90 Years of Innovative Thinking.
Products are changing, values remain.
In 1926, company founder and dentist Rudolf
Scheu laid the foundation for SCHEU-DENTAL.
We at Scheu-Dental are proud of 90 years of
company history, made in Germany. It's been our
claim from the very beginning - and now already
in the third generation - to offer dental products
and services characterised by maximum precision. This philosophy and our attention to detail
have helped us to establish ourselves as market
leaders in the field of dental pressure moulding
and sleep medicine and to play a key role in
shaping the face of dental technology throughout the world. These achievements confirm the
1970
2016
More about
90 years
SCHEU-DENTAL:
1980
2000
1990
worldwide confidence in our innovative ideas for
new products. Our team of highly motivated and
well-trained staff still pursues the same objective - offering highest quality products every day.
See it for yourself and discover the wide range
of products available from SCHEU-DENTAL in our
new catalogue.
2010
Perfection is an obligation - arising from tradition
and commitment, guaranteeing motivation and
success for further generations.
Yours sincerely
Christian Scheu
Achieving perfection is our mission.
A family firm now in its third generation, we
develop attractive products and services for
the sectors of orthodontics, pressure moul
ding, dental sleep medicine. Besides tried and
tested products which have already been used
successfully for many years, we also rely on innovative therapeutic products catering for the
growing demands made on treatments. Our
6
innovative strength thrives on new influences and the lookout for improvement. With the
acquisition of SMILE DENTAL some years ago
SCHEU-DENTAL added another orthodontic specialist to its network, as well as CAD/CAM expert
in the guise of CA DIGITAL GmbH in Düsseldorf.
For further information on CA DIGITAL please
refer to page 12 and 56 or www.ca-digit.com.
Perfection knows no bounds.
The product range of SMILE DENTAL can be found
at www. smile-dental.de.
SCHEU-DENTAL products are used by dental
practices and laboratories in over 100 different
countries and we greatly appreciate the worldwide trust placed in our innovative product
ideas. As early as the 1950s, the founder of
our company used international business trips
and contact to expand his knowledge of stateof-the-art dental technology and make sure the
latest developments were incorporated in our
products.
7
Perfection is a love
for detail.
Dexterity and experience – these are the demands placed on
the challenging, precision mechanical work involved in our
complex designs. Therefore, many parts at SCHEU-DENTAL
are still manufactured by hand, as this is the only way to ensure the greatest possible quality of the precision mechanical
parts. The staff at our site guarantee that the company never
deviates from this quality standards – which is confirmed by
regular product controls according to the latest certification
requirements.
Perfection means bringing innova
At our Research and Development department we
come up with clever ideas designed to lighten the
daily workload of the dental laboratory and practice. Our varied product family combines the latest
discoveries with trusty therapeutic products that
still demonstrate the innovative strength that inspired them. From the CA® CLEAR ALIGNER splint
system to our BIOSTAR® pressure moulding unit
and the IMPRIMO® 90 3D printer: we are always
10
on the lookout for opportunities to improve and for
innovative ideas. Whether investigating the enhancement of resins or developing new products
for treating snoring and sleep apnoea – our close
cooperation with recognised research institutes
and universities gives rise to sophisticated quality
products based on cutting-edge technology.
tive strength and quality to life.
11
Perfection is having a vision for the
Clinical and dental processes in orthodontics are undergoing radical change. Terms like
scanning, 3D planning and printing of working
models, splints or individual impression and functional trays are nowadays most commonly used
in the orthodontic language. We are among the
pioneers of this process of digitalisation and are
looking forward to the promising developments
12
of the future. It is our ambition to bring this future
to life in your practice or laboratory and to assist
you in implementing new technologies and efficient working processes. Therefore our subsidiary company CA DIGITAL offers you the complete
range of digital services - with individual solutions for the CA® CLEAR ALIGNER treatment or the
digitally planned lingual retainer MEMOTAIN®.
future.
As founding member of OrthoAlliance®, an orthodontic alliance of five leading manufacturers in
Germany, we are working on the specific developement of digital processes and products in
modern orthodontics, to the benefit of both, clinician and patient.
13
Perfection you can rely on.
Whether a query about setting up your
SCHEU-DENTAL equipment such as the BIOSTAR®
or a question relating to specific applications – our
staff in the Sales and Customer Service Departments are on hand with expert advice at all times.
We want you to take advantage of their sound
practical guidance from the outset – a service that
14
our customers can rely on whatever the problem.
This approach goes beyond your actual purchase:
for some years now our SCHEU-ACADEMY offers
training courses and seminars for dental clinicians
and technicians at a regular basis from courses on
CA® CLEAR ALIGNER and TAP® certification to our
pressure moulding workshops as well as courses
on digital orthodontics. Why not get acquainted agree an appointment with our field sales team
with the latest developments in the practice and right away. We look forward to hearing from you.
learn how to achieve even more professional results in the future?
Discover our wide range of training courses and
seminars for dental practices and laboratories at
www.scheu-dental.com/scheu-academy, or simply
15
Clasps and Bars
Clasps and Bars
16
Clasps and Bars
For us at SCHEU-DENTAL
continuity and quality
go hand in hand!
We have been manufacturing clasps for more than 90 years.
Based on that experience, our range of clasps and bars has become
a bench mark. Made of high-grade stainless steel alloys, fabricated in
a cutting and cold forming process, one piece without any soldering
connection and highly-polished surface. Our clasps are of excellent
elasticity and stability – your patients can trust you.
17
Clasps and Bars
O-Clasp
O-Clasp (Ø 0.9 mm)*
O-Clasp (Ø 1.0 mm)**
OK-Clasp
#1002
#1003
OK-Clasp (Ø 0.8 mm)
#1007
10 pcs.
* 10/100 pcs. ** 10 pcs.
Ø 0.9 mm
N-Clasp
N-Clasp (Ø 0.9 mm)*
N-Clasp (Ø 1.0 mm)*
N-Clasp (Ø 1.2 mm)**
*10/100 pcs., ** 10 pcs.
18
Ø 1.2 mm
N BI-FORM-Clasp
#1009
#1010
#1011
N BI-FORM-Clasp (Ø 0.9/1.2 mm)
10 pcs.
#1012
Clasps and Bars
NK-Clasp
NK-Clasp (Ø 0.8 mm)
#1013
10/100 pcs.
T-Clasp
T-Clasp (Ø 0.9 mm)
T-Clasp (Ø 1.0 mm)
#1026
#1027
10 pcs.
TK-Clasp
TK-Clasp (Ø 0.9 mm)
TK-Clasp (Ø 1.0 mm)
#1029
#1030
10/100 pcs.
19
Clasps and Bars
SCHEU-Anchor
Unique retention and spring force! SCHEU-Anchors are made
of high-corrosion resistant stainless steel alloys.
SCHEU-Anchor (Ø 0.6 mm)
SCHEU-Anchor (Ø 1.2 mm)*
10/100/1000 pcs. * 10/100 pcs.
J-Clasp
J-Clasp (Ø 0.8 mm)
J-Clasp (Ø 0.9 mm)
J-Clasp (Ø 1.0 mm)
J-Clasp (Ø 1.1 mm)
#1017
#1018
#1019
#1047
10/100 pcs.
upper left
lower right
upper right
lower left
J-Clasp oblique
J-Clasp oblique (Ø 0.8 mm)
#1020
#1021
#1022
#1048
10/100 pcs. (5/50 left 5/50 right in pairs)
JM-Clasp
JM-Clasp (Ø 1.2 mm)
10 pcs.
20
#1023
#2048
#2049
#2050
#2051
#2052
#2053
Clasps and Bars
PROFI-bar
PROFI-bar, straight (length 80 mm)
PROFI-bar, curved (length 80 mm)
#1040
#1039
2,5 mm
10 pcs.
1,5 mm
Jaw Fracture Splint
With 20 buttons. Not to be exposed to MRI.
Jaw Fracture Splint, hard (Ø 1.0 mm)
Jaw Fracture Splint, soft (Ø 1.0 mm)
#1038
#1049
10 pcs.
Lingual Bar curved
Elliptical hard stainless steel profile, anatomically bent with
stamped retentions.
Lingual Bar, curved (length 60 mm)
#1051
#1052
#1053
10 pcs.
3.0 mm
1.5 mm
21
Orthodontics
Our products are still
unsurpassed!
Quality is not a question of size. End of the 1950ies, our first orthodontic product was the SCHEU-Anchor – a retention element, still unsurpassed in terms of quality, workmanship and spring force. Today our
orthodontic line is supplemented and enhanced by innovative products
such as VECTOR® expansion screws and the CA® splint therapy.
22
Orthodontics
Orthodontics
23
Orthodontics
SCHEU-Anchor
Unique retention and spring force! SCHEU-Anchors are made
of high corrosion-resistant stainless steel alloys.
SCHEU-Anchor (Ø 1.2 mm)*
#2048
#2049
#2050
#2051
#2052
#2053
10/100/1000 pcs. * 10/100 pcs.
Arrow Clasp
Made of the nickel-free MENZANIUM® alloy, cold-formed,
with highly-polished surface. Excellent elasticity and
strengh. Due to manufacturing process, alloy may content
nickel trace elements of 0 – 0.2 %.
Arrow Clasp (Ø 0.7 mm)
Arrow Clasp (Ø 0.8 mm)
#2055
#2056
10/100 pcs.
Triangle Clasp
Made of the nickel-free MENZANIUM® alloy, cold-formed,
with highly polished surface. Excellent elasticity and
strengh. Due to manufacturing process, alloy may content
nickel trace elements of 0 – 0.2 %.
Triangle Clasp (Ø 0.7 mm)
Triangle Clasp (Ø 0.8 mm)
#2288
#2322
100/1000 pcs.
Adams-Clasp
Modified form for optimised retention and easy adjustment.
Made of the nickel-free MENZANIUM® alloy. Due to manufacturing process, alloy may content nickel trace elements
of 0 – 0.2 %.
Adams-Clasp (Ø 0.7 mm, width 6 mm)
10/100 pcs.
24
#2104
#2105
#2106
#2107
#2108
#2109
Orthodontics
Coffin-Spring
Made of the nickel-free MENZANIUM® alloy. Due to manufacturing process, alloy may content nickel trace elements
of 0 – 0.2 %.
Coffin-Spring (Ø 1.2 mm, length 11 mm)
#2419
10/100 pcs.
Frontal Guiding Bars acc. to R. Hinz
For treatment of Angle Class II cases (lower jaw retrusion/
distal occlusion) by means of double plates as well as for
bilateral upper jaw expansion in growing children using an
expansion screw. Made of the nickel-free MENZANIUM®
alloy – nickel trace elements of 0– 0.2 % are possible due
to material processing.
Guiding bars* (Ø 1.2 mm, length 14 mm)
Guiding bars* (Ø 1.2 mm, length 18 mm)
Positioning support, 5 pcs.
For insertion and alignment of guiding bars
and expansion screws
Angle Tester acc. to Adamik, 1 pc.
For fixing and controlling the insertion angle
#2329
#2330
#2331
#2332
* 5/50 pairs
Functional appliance enabling the lower jaw to move in the
required position, depending on type (1–3). U-Bars according to Karwetzky are made from mouth and corrosion
resistant stainless steel alloy.
U-Bar acc. to Karwetzky*
Münster separating plate, 1 pc.
For exact separation of upper and lower jaw,
suitable for split-fixator (page 100).
#2118
#5381
* 5/50 pairs
25
Orthodontics
MENZANIUM®
MENZANIUM® is a nickel-free* alloy, fabricated in a patented
high-pressure melting process replacing allergenic nickel
components by manganese and nitrogen. Compared to conventional stainless steel wires, corrosion resistance and breaking
strength are increased. Wire is available in two versions, hard
(1400 –1600 N/mm2) and spring-hard (1800 – 2000 N/mm2).
* Nickel trace-elements of 0-0.2 % are possible due to material processing.
MENZANIUM® Coil Wire
MENZANIUM® coil wire is diamond drawn and highly-polished and can be used for joining techniques, laser-welding
and welding. Measurements, tolerances and quality acc. to
DIN EN ISO 15841.
Version
0.5 mm .020 inch
(50 m )
0.6 mm .024 inch
(40 m )
0.7 mm .028 inch
(30 m )
0.8 mm .032 inch
(20 m )
0.9 mm .036 inch
(10 m )
1.0 mm .040 inch
(10 m )
1.2 mm .048 inch
(10 m )
* only available as lab coil
Lab coil: 10 – 50 m wire length
MENZANIUM Wire Rods
MENZANIUM® wire rods are elongated and aligned.
hard
spring-hard
–
–
#8453
#8454
#8455
#8456*
–
#8459*
#8460
#8461
#8462
#8463
#8464
#8466
Clinic coil: 58 – 330 m (coil 500 g)
®
75 mm version
0.6 mm
0.7 mm
.024 inch
.028 inch
150 mm version
0.7 mm
0.8 mm
0.9 mm
.028 inch
.032 inch
.036 inch
200 mm version
0.8 mm
0.9 mm
1.0 mm
.032 inch
.036 inch
.040 inch
hard
spring-hard
–
#8480
#8478
#8467
hard
spring-hard
#8482
–
–
#8468
#8469
#8471
hard
spring-hard
–
–
–
#8470
#8472
#8473
all packages of 500 g
1200
MENZANIUM®
1000
Potentials in mV
800
600
400
200
Product A
Product B
Product C
Stainless Steel (Cr-Ni)
26
Breakdown potential for wires of the ferrous
alloys group.
Electrochemical study of corrosion properties of orthodontic
auxiliary elements in artificial saliva (Reference electrode
Ag/AgCL, feed rate 1 m V/sec.)
Product D
Nitrogen steel
M. Neuhöfer: “Experimental Dentistry”, dissertation 1993, University Dental Clinic Freiburg,
head: Prof. Dr. H. F. Kappert
Orthodontics
CHROMIUM Coil Wire
CHROMIUM coil wire is also diamond drawn and highly-polished and can be used for joining techniques, laser-welding
and welding. Measurements, tolerances and quality acc.
to DIN EN ISO 15841. Wire is available in two versions, hard
(1400 –1600 N/mm2) and spring-hard (1800 – 2000 N/mm2).
Version
hard
0.5 mm .020 inch
(50 m )
0.6 mm .024 inch
(40 m )
0.7 mm .028 inch
(30 m )
0.8 mm .032 inch
(20 m )
0.9 mm .036 inch
(10 m )
1.0 mm .040 inch
(10 m )
1.1 mm .044 inch
(10 m )
1.2 mm .048 inch
(10 m )
1.5 mm .059 inch
(36 m )
* only available as clinic coil
** only available as lab coil
Lab coil: 10 – 50 m wire length
#8323**
#8324**
#8325
#8326
#8327
#8328
#8329
#8338**
#8382*
spring-hard
#8330
#8331
#8332
#8333
#8334
#8335
#8336
#8339
#8383*
Clinic coil: 26 – 324 m (coil 500 g)
CHROMIUM Wire Rods
CHROMIUM wire rods are also elongated and aligned.
75 mm version
0.6 mm
0.7 mm
.024 inch
.028 inch
100 mm version
0.6 mm
0.7 mm
0.8 mm
.024 inch
.028 inch
.032 inch
hard
spring-hard
–
–
#8305
#8306
hard
spring-hard
–
#8293
–
#8322
#8307
#8310
150 mm version
0.7 mm
0.8 mm
0.9 mm
.028 inch
.032 inch
.036 inch
200 mm version
0.8 mm
0.9 mm
1.0 mm
.032 inch
.036 inch
.040 inch
hard
spring-hard
#8294
#8297
#8299
#8308
#8311
#8313
hard
spring-hard
–
–
–
#8312
#8314
#8316
all packages of 500 g
27
Orthodontics
STEADY-RESIN S
Cold cure resin for the “salt and pepper” technique. This polymer meets all requirements for “salt and pepper” technique,
such as high stability and wettability.
STEADY-RESIN S (Polymer)
#8134
1 kg
STEADY-RESIN M
Cold cure resin for “premix” technique. This polymer is characterised by high pouring qualities and easy modelling.
STEADY-RESIN M (Polymer)
#8135
1 kg
STEADY-RESIN VARIO
Cold cure resin for orthodontics with extended working time
suitable for “salt and pepper” and “premix” techniques.
STEADY-RESIN VARIO (Polymer)
#8140
1 kg
STEADY-RESIN S+M
This monomer is an all-purpose monomer and can be used
with all STEADY-RESIN polymer versions. The clear monomer
can be mixed with STEADY-RESIN coloured monomers.
STEADY-RESIN S+M (Monomer)
STEADY-RESIN S+M (Monomer)
clear
rose
#8136
#8137
500 ml
Bottle spout
Reusable
Bottle spout
1 pc.
28
#8149
Orthodontics
STEADY-RESIN Neon Monomers
Coloured neon monomers ready for use with STEADY-RESIN
S, M and VARIO and DURASPLINT® polymers. For streakfree, translucent results.
neon pink
neon red
neon yellow
neon green
neon blue
neon orange
#8350
#8357
#8358
#8359
#8360
#8361
100/250 ml
STEADY-RESIN Coloured Monomers
STEADY-RESIN coloured monomers ready for use with
STEADY-RESIN S, M and VARIO and DURASPLINT®
polymers.
blue
yellow
red
black
green
violet
#8351
#8352
#8353
#8354
#8355
#8356
100/250 ml
STEADY-RESIN Polymer
Pre-mixed polymer in two colours. Innovative pigments provide high-contrast effects.
black
white
#8130
#8131
200 g
Mica
For individual mixing with STEADY-RESIN and DURASPLINT® polymer. The blends rainbow, rainbow green and
rainbow violet are completely metal-free, creating iridescent gleam in pastel colours.
Mica
Mica
Mica
Mica
Mica
Mica
Mica
Mica
silver
gold
blue
red
green
rainbow
rainbow green
rainbow violet
#8144
#8145
#8146
#8147
#8148
#8150
#8151
#8152
50 g
29
Orthodontics
RESIMIX®
Original mixing cups of clear silicone, strong suction base,
very practical pouring spout for medium and large version.
RESIMIX® 5 ml, 3 pcs.
RESIMIX® 30 ml, 2 pcs.
RESIMIX® 70 ml, 1 pc.
#7243
#7284
#7244
Alginate insulation for plaster models, single apply provides
excellent insulation.
#8364
500 ml
NEW!
3D Model insulation
Insulation agent for 3D models when using cold cure resins
such as STEADY-RESIN S. Application by enclosed brush
for optimum insulation. 3D model insulation is suited for
3D models generated by IMPRIMO®90 or 3D printers from
other manufacturers.
3D Model insulation
65 ml
30
#6510
Orthodontics
Spray Bottles / Spray Nozzles
Spray bottle with dosing tip and closure for monomer and
polymer. Perfect dosing by piercing the tip with a needle.
Optional metal spray nozzles for easier dosing of polymer and
monomer. Nozzles can be mounted on spray bottle.
Spray bottles 100 ml, 1 pc.
Spray nozzles (Monomer), 5 pcs.
Spray nozzles (Polymer), 5 pcs.
#8141
#8138
#8139
Ortho Designs
Monomer-resistant folio pictures for insertion in orthodontic
plates or pressure moulding material.
Assortment of ortho designs,400 pcs.
Ortho designs, single motif*, 20 pcs.
#8142
#8143
*please indicate desired motif
Silicone Tube
For covering clasp wire.
Silicone Tube
Inner : Ø 1.0 mm, outer : Ø 2.0 mm
2.0 mm
#3211
1m
1.0 mm
31
Orthodontics
W
H
NEW!
VECTOR® 30
Special miniaturised sector screw with yellow directional
arrow for single tooth movement.
To assure safe anchorage, retention wires (not being part
of the delivery) can be inserted and adjusted individually.
Can also be used for oblique segment expansion in the
CA® CLEAR ALIGNER technique in combined use with the
CA® CHROMIUM Arch and two VECTOR® 30 screws.
L
Activation:
1x ¼ turn: 0.0875 mm
4x ¼ turn: 0.35 mm
VECTOR® 30
W x H x L: 4.8 x 2.6 x 9.5 mm expansion: 4.0 mm
#2484
10 pcs., incl. 10 pcs. keys for expansion screws
W
H
L
VECTOR® 40
Special miniaturised screw for fabrication of CA® splints,
allowing activation and rapid transverse expansions (up to
3 mm). With retention arms providing a secure anchorage
with acrylic on CA® splints. Laser-welded directional arrow.
VECTOR® 40
#2486
W × H × L: 3.6 × 2.5 × 19.0 mm expansion: 3.0 mm
10/50 pcs.
W
H
L
VECTOR® 50
Skeletal miniaturised expansion screw with yellow directional
arrow for transverse expansion of the lower jaw, can also be
used for narrow upper jaws and for single tooth movement.
VECTOR® 50
#2489
10/50 pcs.
32
VECTOR® 80
#2490
Orthodontics
VECTOR® 80
Skeletal expansion screw with yellow directional arrow for
transverse expansion of the lower jaw. Additional bore holes
in screw housing assure excellent retention in acrylic.
W
H
L
10/50 pcs.
VECTOR® 90 / VECTOR® 100
transverse expansion of the lower jaw. Notches on guide
pins prevent screw from exceeding maximum expansion.
For treatment of Angle Class II cases we recommend using
VECTOR® 100 in combination with VECTOR® 900.
VECTOR® 90
#2491
VECTOR® 100
#2492
W
H
L
10/50 pcs.
tansverse and sagittal expansion of the lower and upper jaw.
VECTOR 140
#2494
VECTOR® 160
#2496
W
H
®
L
10/50 pcs.
33
Orthodontics
W
H
Stable skeletal expansion screw with yellow directional
arrow for upper jaw transverse expansion and for bi-maxillary appliances. Additional retention holes in screw housing
assure excellent retention in acrylic.
VECTOR® 190
#2497
VECTOR® 200
#2498
L
10/50 pcs.
W
H
VECTOR® 350
Miniaturised skeletal sector expansion screw with yellow
directional arrow for single tooth and segment movement
in upper and lower jaw.
VECTOR® 350
#2509
10/50 pcs.
W
H
VECTOR® 400
Skeletal expansion screw with yellow directional arrow. Can
also be used for single tooth movement.
L
VECTOR® 400
#2510
10/50 pcs.
34
Orthodontics
VECTOR® 420
Delicate skeletal sector expansion screw with yellow directional arrow, can be used for distalisation and single tooth
movements.
W
H
VECTOR® 420
#2512
L
10/50 pcs.
W
VECTOR® 440
Delicate skeletal sector expansion screw with yellow directional arrow for distalisation. Angled U-retention.
H
H
L
VECTOR® 440
#2514
10 pcs.
VECTOR® 440 R
Delicate skeletal sector expansion screw with yellow directional arrow for single tooth or segment movements. Angled
U-retention.
VECTOR® 440 R
#2513
W
H
H
L
10 pcs.
35
Orthodontics
W
H
VECTOR® 460
Skeletal expansion screw in stronger version with yellow
directional arrow.
VECTOR® 460
#2516
L
10 pcs.
W
H
L
Traction screw for space closure with black directional arrow
on housing.
VECTOR® 500
#2520
W × H × L: 6.2 × 3.0 × 13.5 mm traction: 3.0 mm
VECTOR® 520
#2522
W × H × L: 6.2 × 3.0 × 18.0 mm traction: 5.0 mm
10 pcs.
With end stop!
W
H
L
VECTOR® 600* / VECTOR® 620*
Special screw for palatal expansion, anatomically bent
retention arms are soldered or welded to molar bands. The
specially designed housing perfectly fits the palatal vault.
Integrated polyamide nut prevents the screw from backing-up, laser-welded marking for direction and expansion
on housing. Comes with security expansion key.
VECTOR® 600
#2524
W × H × L: 10.4 × 4.0 × 14,0 mm expansion: 9.0 mm
VECTOR® 620
#2526
W × H × L: 10.4 × 4.0 × 16,0 mm expansion: 11.0 mm
1/10 pcs.
*Not recommended for surgically-assisted rapid palatal expansion. Make sure not to expose screw housing to heat, which may lead
to damaging the integrated polyamide sleeve and may cause jamming.
36
VECTOR® 720
W × H × L: 17.0 × 3.6 × 15.7 mm
Frontal expansion: 5.5 mm
Transverse expansion: 7.0 mm
Orthodontics
VECTOR® 720 acc. to Bertoni
Special screw according to Bertoni for insertion in multi-sector
plates, enabling separate protrusion and symmetric transverse
expansion by two spindles, working independently from each
other.
L
H
W
#2530
2 pcs.
H
Special screw according to Bertoni for insertion in multi-sector plates, enabling separate protrusion and symmetric resp.
asymmetric transverse expansion by three spindles, working
independently from each other.
VECTOR® 730
W × H × L: 17.0 × 3.6 × 15.7 mm
Transverse expansion: 2 x 3.5 mm
L
W
#2532
2 pcs.
Modified and angled special screw according to Bertoni for
insertion in multi-sector plates, enabling separate protrusion
and symmetric transverse expansion by two spindles, working
independently from each other.
VECTOR® 740
W × H × L: 15.0 × 5.0 × 15.0 mm
Transverse expansion: 8.0 mm
L
H
W
#2540
2 pcs.
37
Orthodontics
VECTOR® 750 according to Bertoni
Modified and angled special screw according to Bertoni for
insertion in multi-sector plates, enabling separate protrusion
and symmetric resp. asymmetric transverse expansion by
three spindles, working independently from each other (for
bilateral expansion).
L
H
W
VECTOR® 750
W × H × L: 15.0 × 5.0 × 15.0 mm
Transverse expansion: 2 x 4 mm
#2542
2 pcs.
With end stop!
W
H
Special miniaturised screw for distraction of lower jaw, incorporating stable retention arms with 60 mm length, with
laser-welded marking on housing.
VECTOR® 800
#2533
VECTOR® 820
#2534
L
1/5 pcs., with security expansion screw
H
L
W
VECTOR® 900
Screw for insertion in protrusive double plate for treatment
of Angle Class II cases (lower jaw retrusion/distal occlusion)
as well as for bilateral expansion of the upper jaw in growing
children. Compact design with integrated expansion screw
incl. security expansion key and SD-Box. For lower jaw we
recommend the combined use with VECTOR® 100.
VECTOR® 900
#2536
Angle tester acc. to Adamik
#2332
For fixing and controlling the insertion angle
1 pc.
38
Orthodontics
Security Expansion Screw
For HF5, HF9 and HF15 telescopes of IST® appliances and for
all kinds of palatal screws.
Security Expansion Screw
#2100
10 pcs.
Activation Key
Activation Key for TAP ®-T and TAP ®-T Reverse upper
protrusion adjustment device as well as for IST® hexagon
socket screws.
Activation Key
#9035
1 pc.
Key for Expansion Screws
For fine adjustment of VECTOR® expansion screws.
Key for Expansion Screws
Key for Expansion Screws, angled
#2101
#2130
10/100 pcs.
Set-Up Trimmer
Special carbide bur for drilling and vertical cuts.
Set-Up Trimmer
#5371
39
Orthodontics
Set-Up Plaster
White plaster, free of formaldehyde, for use in orthodontics
and CA® SMART system.
Technical data acc. to DIN EN ISO 6873:
Compression strength after 24 h 65 MPa
Expansion after 2 h < 0.09 %
Set-Up Plaster
#5266
2.5/5.0 kg
Set-Up Separating Disc
With stable mesh layer, including mandrel with reinforced
shaft (Ø 40 mm).
Application
Hard plaster, ceramics, high-grade metal, NEM
Set-Up Separating Disc incl. mandrel, 0.5 mm
#5293
1 pc.
Set-Up Saw
Angle formed saw enables precise and controlled cutting of
single tooth segments.
Set-Up Saw
Set-Up Saw blades*
(W × H × L: 0.15 × 2.0 × 75.0 mm)
Set-Up Saw blades*
(W × H × L: 0.20 × 2.0 × 75.0 mm)
* 10 pcs.
40
#5372
#5373
#5379
Orthodontics
Set-Up Wax Bars
Fast-melting set-up wax for transpositions.
Set-Up Wax Bars, red
#5368
3 bars of 50 g
Set-Up Wax Sticks
Soft set-up wax with good adhesive properties.
Set-Up Wax Sticks, opaque
#5268
25 sticks of approx. 1.2 g
BIOPERM-Trimmer / POLYFIX
For grinding and finishing soft-elastic and sandwich material,
BIOPERM-Trimmer in blue, POLYFIX in brown.
BIOPERM-Trimmer, 2 pcs.
POLYFIX on mandrel, 1 pc.
POLYFIX, without mandrel, 6 pcs.
#3226
#3371
#3372
41
Orthodontics
Separating disc is diamond coated on both sides (thickness
0.28 mm) for very fine saw cuts on set-up models and for
cutting splints.
mounted on mandrel (Ø 22 mm)
BLUE-BLOKKER®
Light-curing, blue-translucent blocking-out and modelling
putty with excellent flow characteristics, for fabrication of
space maintainers of bleaching splints and medical trays
as well as for sealing and blocking set-up models. Burns
down leaving no residue and can therefore be also used in
prosthetics when fabricating fixed or removable prostheses.
Telescope constructions will be stable and can be removed
without tension. Curing in the range of 380 – 470 nm.
BLUE-BLOKKER®
#5276
4
× 1.5 g, 2× micro cannula (Ø 0,6) and 8× mini cannula
Micro cannula* (Ø 0,4 mm)
#5277
Micro cannula* (Ø 0,6mm)
#5264
Mini cannula* (Ø 0,9 mm)
#5278
* 5 pcs.
42
#5288
Orthodontics
Hinge System acc. to Herbst*
For treatment of class II cases, for soldering or welding on
cast or ready-made bands. Without stop.
Set: 1 pair of hinges and 4 pair of fixing elements
incl. hexagon socket screws
4 pair of fixing elements
incl. hexagon socket screws
Set: 1 pair of hinges and 4 pair of fixing elements
incl. slotted screws
incl. slotted screws
1 pair of hinges
#5479
#5455
#5480
#5456
#5478
Distance Rings
When fabricating Herbst* appliances, distance rings can be
put on the connecting rod, enabling progressive posterior
activation.
1 mm
2 mm
3 mm
4 mm
5 mm
3.0 mm
2.0 mm
#5481
#5482
#5483
#5484
#5485
10 pcs. Inner diameter 2.0 mm
* Herbst is a registered trademark of
DENTAURUM GmbH & Co. KG, Ispringen, Germany
Hinge 44 with slotted screw
For treatment of class II cases with removable or fixed
splints, laser-welded retentions of 44 mm length provide
secure anchorage in the splints. Without stop.
1 pair of hinges and 4 pair of fixing elements
#5490
#5489
43
Orthodontics
ORTHOFIT®-Face-Bows
Face-bows made of stainless steel, inner and outer bow (Ø 1.8 mm)
laser-welded on both sides, permanent mid marking and coloured
rings for size indication. Inner bow is made from one piece, outer
bow is available in short or standard with bent outer loops and
standard inner bow or U- loops (Ø 1.15 mm, .045˝ ) in five sizes.
Bent outer loops positioned in a 16° angle provide optimum power
transmission.
ORTHOFIT Anatomic
Stand
ard
Short
Standard
ORTHOFIT Omega
5
3
2
1
1
2
3
4
Size
Standard
Size 1
Size 2
Size 3
Size 4
Size 5
5
1–5
ORTHOFIT®-Omega
Standard outer bow and inner bow with 5 different sizes,
with U-loops, marked with coloured ring.
Size 1
Size 2
Size 3
Size 4
Size 5
1 pc.
44
black
pink
silver
orange
gold
Bar length*
120 mm
83 mm
90 mm
97 mm
104 mm
111 mm
* Bar length = extended amount of inner bow with U-loops.
Size inner bow
Standard
4
ORTHOFIT Line
#2458
#2459
#2460
#2461
#2462
Size inner bow
26.0 mm
28.0 mm
30.5 mm
35.0 mm
39.5 mm
Orthodontics
ORTHOFIT®-Anatomic
Standard inner bow and outer bow with 2 different sizes,
marked with coloured ring.
Anatomic short
red
#2450
Anatomic standard
blue
#2451
1 pc.
ORTHOFIT®-Line
Pre-bent U-loops in 5 sizes, same length of outer and inner bow
for optimum power projection. Marked with coloured ring.
Size 1
Size 2
Size 3
Size 4
Size 5
red
green
yellow
blue
white
#2453
#2454
#2455
#2456
#2457
1 pc.
45
Orthodontics
Face-Bows
Face-bows made of stainless steel, inner and outer bow (Ø 2.0 mm)
laser-welded on both sides. Permanent mid marking and coloured
rings for size indication.
Inner bow is made from one piece. Available with normal or short outer bow with bent outer loops and standard inner bow or with U-loops
in 5 sizes. Polished stainles steel or coloured plastic coating.
Bar length*
120 mm
84 mm
89 mm
94 mm
103 mm
112 mm
normal
2
3
4
5
standard
Size inner bow
26.0 mm
28.0 mm
30.5 mm
35.0 mm
39.5 mm
Size inner bow
Size
Standard
Size 1
Size 2
Size 3
Size 4
Size 5
1
short
* Bar length = extended amount of inner bow with U-loops
Face-Bow, polished
Stainless steel version, stable laser-welding on both sides,
one piece inner bow and normal or short outer bow with
coloured protection caps. Sizes 1–5 are available with loops
of 15° torque.
Standard, short
Standard, normal
Size 1, normal
Size 2, normal
Size 3, normal
Size 4, normal
Size 5, normal
1 pc.
46
white
white
yellow
blue
black
green
red
#2439
#2119
#2334
#2335
#2336
#2337
#2338
Orthodontics
Activator Tubes acc. to Teuscher
Fixation for face-bows, can be polymerised.
Activator Tubes
Inner diameter: 1.15 mm/.045˝
Activator Tubes
#2436
#2434
10 pcs.
Activator Tubes
For insertion of face-bows in individually bent A-clasps.
Stable laser-welding on both sides.
Activator Tubes (6.0 mm length)
Wire: 1.0 mm h/125 mm length
Wire: 0.8 mm fh/125 mm length
Wire: 0.7 mm fh/125 mm length
#2472
#2471
#2470
10 pcs.
6 mm acrylic glass plate with positioning pins for exact
positioning on the raphe palati. 2 mm grid enables precise
determination of sagittal and transverse asymmetries of
the dental arcade.
#8431
1 pc.
47
Orthodontics
ECHARRI Ceph Template
Blue template is used for cephalometric tracing measurement, plaster cast study, clinical check of the progress of
the CA® treatment as well as other orthodontic treatments.
#8432
1 pc.
ECHARRI Arch Template
Red template is used to measure the length of the dental
arch, visualising the deviation from the ideal arch by overlapping. Can also be used in the fixed orthodontic treatment
for wire adaptation.
1 pc.
48
#8433
ECHARRI VTO Template
Green template is used for orthodontic or surgical VTO.
1 pc.
#8434
Orthodontics
ECHARRI Template Kit
Comes with ECHARRI Ceph template, ECHARRI arch template, ECHARRI VTO template and exact instruction.
#8435
1 pc.
Retainer boxes
For storing orthodontic appliances or BIOPLAST® mouth
guard, available in blue, yellow, green, red and violet.
Retainer boxes (2 × 5 colours)
#5435
10 pcs.
49
Orthodontics
CETRON® Cleansing Powder
Mild powder for long lasting care and cleansing of orthodontic plates, splints, dentures and mouth guards. To be
dissolved in 150 ml water, can be used for 3–4 days.
CETRON® Cleansing Powder, 15 g
#3237
5/50/250 bags
CETRON® Cleansing Spray
Care and cleansing of splints, dentures, orthodontic plates,
mouth guard and anti-snoring appliances. Fresh lemon taste
reduces typical monomer taste, ensuring highly-polished
appliances and high wearing comfort at the same time.
CETRON® Cleansing Spray, 75 ml
75 ml
50
#3238
NEW!
Height
HÖHE
Available in straight and curved version.
S
#8010
#8011
#8020
#8021
#8030
#8031
RdEt
IThE
Quad Helix size 1, straight sheath
Quad Helix size 1, curved sheath
W
Bi
5 pcs.
straight
8010
8020
Size 1 Size 2
13
16
25
27
36
39
9
9
curved
8030
8011
Size 3 Size 1
17,5
13
29
25
45
36
9
10
5,5 + 1
8021
Size 2
16
27
39
10
8031
Size 3
17,5
29
45
10
LÄ
1 2
th
ng g t h
L e L en
Length 1
Length 2
Width
Height
S
Orthodontics
Quad Helix
Pre-fabricated expansion arch made of CHROMIUM wire
(dia. 0.9 mm) to be fixed at upper molars in palatal sheaths.
N
LÄ
G
N
E
1
G
E
2
S = sheath size
NEW!
Lingual / palatal sheaths
Sheaths made of stainless steel to be welded or laser-welded
to molar bands. Available in straight and curved version.
Lingual / palatal sheath, straight
Lingual / palatal sheath, curved
#8080
#8081
5 pcs.
51
Orthodontics
CARAT® Wire Bending Pliers
Pliers made of high-grade stainless steel alloy with exactly
machined tips and precisely guided pivots. Ergonomic
design with rounded edges ensures fatigue-free handling.
26.5
CARAT® Krampon Pliers
Pin and wire cutting/bending pliers with chequered and
crenate tips, for hard wires up to Ø 1.2 mm and soft wires
up to Ø 1.5 mm.
CARAT® Krampon Pliers
mm
m
1.0 m
#2040
1 pc.
25.0
CARAT® Flat Pliers
Flat needle-nose pliers acc. to Marburg model with delicate,
chequered guiding tips.
CARAT® Flat Pliers
mm
m
1.0 m
#2041
1 pc.
10 m
m
1.2 m
m
Ø 0.9 mm
CARAT® Young Pliers
Loop and arch bending pliers with multiple creneate tips for
labial arches and hard wires (Ø up to 0.9 mm).
1 pc.
52
#2042
Ø 1.5 mm
Ø 4.0 mm
Ø 2.8 mm
m
Ø 1,0
CARAT® Angle Pliers (HM)
Carbide wire bending pliers with a square end and a round
tip, for wires up to 0.7 mm.
CARAT® Angle Pliers (HM)
Ø 1,0
mm
mm
#2043
1 pc.
9 mm
CARAT® Aderer Pliers large
Aderer wire bending pliers, three prong with reinforced tips,
for wires up to 0.9 mm.
CARAT Aderer Pliers large
®
#2044
m
1,5 m
1 pc.
NEW!
CARAT® Aderer Pliers medium
Aderer wire bending pliers, three prong with reinforced tips,
for wires up to 0.7 mm.
#2046
7 mm
m
1,5 m
1 pc.
NEW!
Ortho Arch Bender
Bending aid made of aluminium with 11 different radius
for bending round (dia. 0.5 – 1.5 mm) and square wires
(dia. up to 0.8mm/031”).
Ortho Arch Bender
#8450
1 pc.
53
Orthodontics
11 m
CA® CLEAR ALIGNER
CA CLEAR ALIGNE
®
The right concept
for each practice.
Many things are different with CA® CLEAR ALIGNER,
i.e. the form of the splint and the material thickness. But
the most essential difference: It’s up to you to decide –
the CA LAB® option with the complete value-added in
your hands or the services offered by CA DIGITAL. With
CA® CLEAR ALIGNER you can choose your individual
option.
More than 100.000 patients have been successfully
treated with CA® CLEAR ALIGNER – a significant number
and above all a wide diversity of experience.
www.ca-clear-aligner.com
www.ca-clear-aligner.com
CA® CLEAR ALIGNER
NER
CA® CLEAR ALIGNER
One system – many options.
Innovative 3D technology for even more precise results.
CA DIGITAL is your contact and service partner to get acquainted with the
digital splint therapy. We assist you with all questions relating to precise
digital treatment planning, offering you individual cooperation options. You
receive printed 3D set-up models from CA DIGITAL for splint fabrication at
your site. In other terms: The complete treatment control is in your hands.
AT A GLANCE
56
Fabricating
the model
Scanning
Digital
Set-Up
Rapid
Prototyping
Pressure
Moulding
Fabricate a plaster
model of your patient’s jaw in your
practice.
CA DIGITAL visualise
the plaster model
using a 3D scanner
for 3D diagnosis and
treatment planning.
Our qualified employees proceed
with fabricating
the digital highprecision set-up
model individually
adjusted to your
patient’s jaw.
After your approval
CA DIGITAL produce
in 3D printing the
set-up model according to the individual
treatment plan.
Fabricate the splints
in your own laboratory. You’ll achieve
optimal results using
the BIOSTAR® unit
and CA® foils.
CA® CLEAR ALIGNER
The complete value-added in your hands.
Choosing the CA LAB® option, all treatment steps from planning, set-up
fabrication until realisation of the splint will be carried out in your practice
or a certified CA® laboratory of your choice. The necessary equipment
consists of a pressure moulding unit type MINISTAR S® or BIOSTAR®,
CA® material in soft, medium and hard as well as the CA® SMART software with web cam, CA® Photo Support and CA® CHECKER.
The 3-Splint-System
soft
0,5 mm
medium
0,625 mm
hard
0,75 mm
Three material thicknesses, worn during four weeks for a unique and beautiful smile: with each treatment step, the patient wears three splints of various thickness. Thanks to the steady increase in pressure, teeth are efficiently, yet smoothly aligned – with extraordinary comfort. The special design with
additional covering of the gingival margin (2 –3 mm) increases power transmission, providing even more
efficiency in treatment.
57
CA® CLEAR ALIGNER
CA® SMART
The enhancements made to the CA® SMART software offer
new possibilities for tooth movements in the CA® Set-Up
technique. The new data base and the new user administration integrated in version 4.0 allow simultaneous use for
multiple users. Besides occlusal and frontal images, the
new height adjustment additionally allows taking lateral
vestibular images. Comes with CA® web cam.
System requirements
From Windows 7 Service Pack 1, USB port 2.0, OpenGL
version ≥ 2.1 and DirectX 9.0c, monitor with resolution
of min. 1204 × 768 px, mouse with scroll wheel
New Version!
CA® SMART
1 pc.
CA® CHECKER
Set consisting of digital precision measurement with USB
port, solid base plate made of highly-polished granite,
model holder, spherical bur and level. Precision measurement instrument equipped with capacitive inclination
sensors for determination of torque and angulation values
before and after transpositions on set-up models.
System requirements
From Windows 7 Service Pack 1, USB port 2.0, OpenGL
version 2.0 and DirectX 9.0c, monitor with resolution of
min. 1204 × 768 px
CA® CHECKER
1 pc.
58
#5274
#5311
CA® CLEAR ALIGNER
CA® Photo Support
The stable height adjustable support for the CA® web cam
enables reproducible documentation of occlusal and frontal
images. Technical precondition and separate accessory for
the CA® SMART software. CA® Photo Support comes with
calilbration plate. CA® webcam is not included, but comes
with CA® SMART software.
Dimensions (W × H × D): 180 × 210 × 195 mm
CA® Photo Support
#5315
CA® Model Holder for Photo Support
#5360
Only suited for taking occlusal and frontal
CA® SMART images using dental arcade models
of resin or hard plaster.
CA® Model Holder for Photo Support 4.0
# 5361
For photo support equipped with CA® SMART
software 4.0. Suited for taking occlusal, frontal
and lateral images.
1 pc.
NEW!
Expansion set (4.0) for CA® Photo Support
Besides occlusal and frontal images, the expansion set
allows taking lateral and vestibular images in combination
with CA® SMART 4.0 software.
Content: 1 CA® model holder, 1 hexagon key, 2 height adjustment blocks, 1 CA® SMART matrix, pins, sleeves, labels for
marking the height adjustment blocks.
Expansion set (4.0) for CA® Photo Support
#5313
1 pc.
NEW!
Height adjustment block for CA® Photo Support
For fixing the exact height of the model used with the
CA® Photo Support, removable, resting with the model while
working, enabling simultaneous working on different patient
cases.
Content: 1 height adjustment block, labels
Height adjustment block for CA® Photo Support
#5314
1 pc.
59
CA® CLEAR ALIGNER
CA® Foil soft/medium/hard and Retention
High-quality, transparent, hard-elastic material for gentle
tooth alignment with aesthetic splints in the CA® system.
CA® Retention foils for long-term use are pre-dried and individually vacuum sealed. Material with original CA® marking with thickness indication soft (0.5 mm), medium (0.625
mm), hard (0.75 mm) and Retention (0.75 and 1.0 mm).
Can only be delivered to certified CA® CLEAR ALIGNER partners.
CA® Foil soft
CA® Foil medium
CA® Foil hard
CA® Retention foil pd (0.75 mm)*
CA® Retention foil pd (1.0 mm)*
#3405
#3406
#3407
#3438
#3440
10/100 pcs. * 10 pcs.
CA® Foil A2 soft/medium/hard pd
High-quality, hard-elastic material in tooth colour (A2) for gentle
tooth alignment with aesthetic splints in the CA® system.
Pre-dried and individually vacuum packed for instant use.
CA® Foil A2 soft pd
CA® Foil A2 medium pd
CA® Foil A2 hard pd
#3453
#3454
#3455
10 pcs.
CA® Grinding Set / CA® Carbide Bur
Grinding set consists of 6 various instruments and a dressing
stone. CA® carbide bur made of fine grit carbide is characterised by high cutting performance, vibration-free concentric
running and very long endurance.
CA® Grinding Set
#5263
comes with Set-Up Disc, Diamond Separating Disc,
DIMO® PRO with mandrel, HM-Tricutter (fine),
Set-Up Model Trimmer, dressing stone
and CA® Carbide Bur
CA® Carbide Bur
#5262
1 pc.
60
NEW!
CA® CLEAR ALIGNER
NEW!
CA® Distalizer Kit acc. to Dr. Echarri
Kit for the fabrication of a CA® Distalizer acc. to Dr. Echarri
for one- and double-sided molar distalisation. Components
are also available separately.
#5319
Contains 1 CA® pressure spring, 1 CA® guiding rod,
1 CA® telescope sleeve incl. auxiliary,
1 VECTOR® 350 screw with expansion key.
VECTOR® 40
Special miniaturised screw for fabrication of CA® splints,
allowing activation and rapid transverse expansions (up to
3 mm). With retention arms providing a secure anchorage
with acrylic on CA® splints. Laser-welded directional arrow.
VECTOR® 40
#2486
W × H × L: 3.6 × 2.5 × 19 mm, expansion 3.0 mm
10/50 pcs.
61
CA® CLEAR ALIGNER
W
H
L
NEW!
VECTOR® 30
Special miniaturised sector screw with yellow directional
arrow for single tooth movement.
To assure safe anchorage, retention wires (not being part
of the delivery) can be inserted and adjusted individually.
Can also be used for oblique segment expansion in the
CA® CLEAR ALIGNER technique in combined use with the
CA® CHROMIUM Arch and two VECTOR® 30 screws.
Activation:
1x ¼ turn: 0.0875 mm
4x ¼ turn: 0.35 mm
VECTOR® 30
W x H x L: 4.8 x 2.6 x 9.5 mm expansion: 4.0 mm
#2484
10 pcs., incl. 10 pcs. keys for expansion screws
NEW!
CA® CHROMIUM Arch
Pre-bent arch made of CHROMIUM wire as auxiliary element.
Application:
For fabrication of special CA® CLEAR ALIGNER splints
with two integrated VECTOR® 30 screws, enabling oblique
segment expansion according to Dr. Echarri.
Wire diameter: 0.8 mm
CA® CHROMIUM Arch
5 pcs.
Ortho Arch Bender
Bending aid for the manufacture of arch wire (for product
details see page 53).
62
#5317
CA® TIP 1 (hemi-spherical Ø 1.4 mm)
Ø 1.45 mm
#5281
CA® TIP 2
Small spherical tip allows forming of activation points in
CA® splints. Made of stainless steel, sterilisable.
CA® TIP 2 (hemi-spherical Ø 1.0 mm)
CA® CLEAR ALIGNER
CA® TIP 1
Large spherical tip allows inserting retention points in
CA® splints, for increase of friction. Made of stainless
steel, sterilisable.
Ø 1 mm
#5291
3.6 mm
1.5 mm
CA® TIP 3
Pliers with oval plateau, enabling creation of activation
surfaces in CA® splints. Stainless steel, sterilisable.
CA® TIP 3
#5292
4 mm
2.5 mm
CA® TIP 4
Pliers for torque control with curved plateau, enabling
creation of labial/lingual activation surfaces in CA® splints.
Stainless steel, sterilisable.
CA® TIP 4
#5295
63
CA® CLEAR ALIGNER
CA® POWER GRIP
CA® POWER GRIP forms enable fabrication of individual attachments for the CA® CLEAR ALIGNER technique. Nine different forms
are included in the set which can be filled with light-cured composite for direct application on the prepared tooth.
CA® POWER GRIP MFM u
MFM (Multifunctional Forced Movement): Used for extrusion,
mesial and distal rotation. For use with CA® splints and elastics.
CA® POWER GRIP MDI v
MDI (Mesial/Distal lnclination): Enables setting upright frontal
teeth, is used for mesial/distal inclination.
CA® POWER GRIP DMI w
DMI (Distal Mesial Inclination): Enables setting upright frontal
teeth, is used for distal/mesial inclination.
CA® POWER GRIP FALA x
FALA (Force Application LABIAL): Used for protrusion, retrusion
and torque control up to 3°. For fabrication of activation surfaces
on the teeth in the gingival area with labial positioning – for teeth
11, 13, 21, 23, 33 and 43.
CA® POWER GRIP FALI y
FALI (Force Application LINGUAL): Used for protrusion, retrusion
and torque control up to 3°. For fabrication of activation surfaces
on the teeth in the gingival area with labial, lingual and palatal
positioining – for the teeth 12, 22, 31, 32, 41 and 42
CA® POWER GRIP BUB z
BUB (Build-Up Bicuspid): Round pad for molars (3 × 3 mm) for
occlusal bite elevation (approx. 2 mm).
CA® POWER GRIP BUM {
BUM (Build-Up Molar): Round pad for molars (3 × 5 mm) for occlusal bite elevation (approx. 2 mm).
CA® POWER GRIP BUAS |
BUAS (Build-Up Anterior Small, width 2 mm): Used as intrusion
plateau for treatment of deep bite. Helps to maintain the intrusion
forces while the patient is not wearing the CA® CLEAR ALIGNER,
permitting molar extrusion.
CA® POWER GRIP BUAL }
BUAL (Build-Up Anterior Large, width 4 mm): Also used as intrusion plateau for treatment of deep bite, its width being adjusted to
front teeth with a larger palatal surface.
CA® POWER GRIP Set
Set comes with 2 holders and 18 silicone forms
(9 versions, 2 pcs. each, instruction and CD)
CA® POWER GRIP MFM u*
CA® POWER GRIP MDI v*
CA® POWER GRIP DMI w*
CA® POWER GRIP FALA x*
CA® POWER GRIP FALI y*
CA® POWER GRIP BUB z*
CA® POWER GRIP BUM {*
CA® POWER GRIP BUAS |*
CA® POWER GRIP BUAL }*
CA® POWER GRIP holder*
Stainless steel, sterilisable
* 2 pcs.
64
#5338
#5330
#5331
#5332
#5333
#5334
#5335
#5336
#5337
#5339
#5340
CA® CLEAR ALIGNER
CA® FLASH
For insulation and easy removal when pressure moulding
CA® splints on printed models. CA® Flash is applied to the
ISOFLAN® foil prior to pressure moulding.
CA® FLASH
#5308
Pump spray bottle, no aerosol propellant
CA® Cyano Veneer Fast / CA® Pipettes
Crystal clear, fast-curing bonding agent for adhesion of CA®
plastic buttons on CA® splints, can also be used for secure
adhesion of screws when fabricating IST® appliances.
CA® pipettes for precise dosing of adhesive.
CA® Cyano Veneer Fast, 5 g
CA® Pipettes, 25 pcs.
#5302
#5300
Clear-transparent plastic buttons allow placing of elastics in
Class II and III therapy.
#5301
4/40 pcs.
Coloured pencils for marking the CA® measurement points
on the hard plaster models, with blue and red lead.
#5290
2 pcs.
65
CA® CLEAR ALIGNER
CA® Book volume 1
CA® Book by Dr. Echarri on CA® splint therapy, with detailed
description of CA® CLEAR ALIGNER treatment, diagnosis,
indication and fabrication. More than 430 pages with many
coloured illustrations.
CA® book volume 1
CA® book volume 1
CA® book volume 1
German
English
Spanish
#5298
#5305
#5306
1 pc.
CA® Book volume 2 advanced
CA® book volume 2 by Dr. Pablo Echarri complementing
volume 1, showing further therapeutic possibilities of the
CA® CLEAR ALIGNER system and describing the „state of the
art“ in CA® CLEAR ALIGNER technique such as the Progressive Stripping Therapy (PST) , CA® Power Grip forms No. 1- 9,
VECTOR® 30 expansion screw, the CA® Distalizer kit, digital
technique, extraction cases and combined therapy.
NEW!
More than 250 pages with many coloured illustrations.
CA® book volume 2
CA® book volume 2
CA® book volume 2
German
English
Spanish
#5307
#5309
#5318
1 pc.
Handy zipped case for storing and carrying CA® splints.
Takehome, resealable CA® splint bags come with label
space for address and wearing instruction.
Can only be delivered to certified CA® CLEAR-ALIGNER partners.
#5282
Comes with SD-Box, 3 bags of 15 g CETRON®
cleansing powder and 3 CA® splint bags
CA® splint bags, 100 pcs.
#5283
SD-Box
Retainer box for storing various orthodontic and antisnoring
appliances, such as positioner, IST® splint, TAP®/ TAP®-T
splints. With mirror and safe closure, air slits provide optimum airing. Dimensions (L × W × H): 95 × 70 × 31 mm
SD-Box
SD-Box
red
green
#5437
#5438
SD-Box
blue
#5439
10 pcs.
66
CA® CLEAR ALIGNER
CA® Gauge
Set made of stainless steel for control of enamel reduction,
auto-clavable up to max. 135° Celsius.
CA® Gauge (0.1 – 0.5 mm)
#5316
1 pc.
Sterilisable instruments for interproximal enamel reduction
(IER), diamond coated on one or both sides. Available in
12 versions, coating on left, right or both sides. Additional
CA® Stripping Tool with extremely fine and smooth diamond coating (15 μm) on both sides available for polishing.
For safe use of CA® Stripping Tools without EVA hand piece
we recommend using our sterilisable stainless steel holders
which are available in straight and curved version.
diamond
particle size
colour
diamond
diamond
diamond
coating left coating right coating both
90 µm
green
#5342
#5343
60 µm
grey
#5345
#5346
40 µm
red
#5348
#5349
25 µm
white
#5351
#5352
15 µm
yellow
–
–
CA® Stripping Tool stainless steel holder, straight
CA® Stripping Tool stainless steel holder, curved
#5344
#5347
#5350
#5353
#5354
#5355
#5356
ECHARRI PST Set
Set acc. to Dr. Echarri for use in the Progressive Stripping
Therapy (PST) containing 5 CA® Stripping Tools of various
diamond particle sizes, diamond coated on both sides.
Ensures a very smooth enamel surface when using an EVA
hand piece, autoclavable.
ECHARRI PST Set
#5341
Comes in aluminium case containing 1 each CA® stripping
tool 90 µm (green), 60 µm (grey), 40 µm (red), 25 µm (white),
15 µm (yellow), both-sided diamond coating, CA® gauge.
PST Set Standard*
#5357
Comes in aluminium case containing 1 each CA® stripping
tool 40 µm (red), 25 µm (white), 15 µm (yellow), bothsided diamond coating.
* Figure shows ECHARRI PST Set
NEW! PST Set Standard
* no figure available
67
Dental Sleep
68
Medicine
More quality of life.
We assure restful sleep. Trust in the market leader in
dental sleep medicine. The IST® and TAP® appliances set
the standard for successful treatment of snoring and sleep
apnoea. We recommend our SCHEU-ACADEMY courses on
indication and fabrication of these devices.
69
IST® Kit
Intra-oral anti-snoring device, fabricated in the pressure
moulding technique. Connection between upper and lower
jaw is effected by infinitely variable telescope. Lower jaw
and tongue are advanced by protrusion.
IST® Kit HF 9
#5461
Kit comes with 2 telescopes, 4 DURAN® 2.0 mm,
4 ISOFOLAN®, DURASPLINT®, 4 fixing elements with
0-ring, 4 SCHEU-Anchor, Alastik chain, silicone protection tube, security expansion key, SD box for patients,
occlusion trainer, 2 bags of 15 g CETRON® cleansing
powder, instruction and patient information.
1 pc.
Activation length
maximum total length
Telescopes HF 5 / HF 9 / HF 15
Telescopes with stop are availble in 3 sizes (HF 5, HF 9 and
HF 15), subsequent activation is possible.
Telescope HF 5
Telescope HF 9
Telescope HF 15
1 pair
70
#5448
#5450
#5452
Stroke
Length
(min.)
Length
(max.)
stroke
Activation
length
HF 5
21 mm
29 mm
5 mm
3 mm
HF 9
26 mm
40 mm
9 mm
5 mm
HF 15
32 mm
52 mm
15 mm
5 mm
Positioning Support and other Accessories
Positioning support provides exact angle position for inserting
fixing elements.
Positioning Support for IST® (12°/0°), 1 pc.
Fixing elements for IST®, 4 pcs.
(with 0-ring, stable retention
and silicone protection tube
O-rings for IST®, 10 pcs.
Fixing elements for IST® and Herbst* devices, 4 pcs.
(with hexagon socket screw
and silicone protection tube)
Hexagon socket screw, 4 pcs.
#5469
#5468
#5466
#5457
#5458
* Herbst is a registered trademark of Dentaurum GmbH & Co. KG., Ispringen
GEORGE GAUGETM Bite Registration
For simple and precise registration of occlusion in snoring
therapy and orthodontics, bite fixation is adjusted by 2 or
5 mm bite fork.
GEORGE GAUGETM Bite Registration Set
comes with 3 bite forks (1 for each size)
GEORGE GAUGETM bite fork, 10 pcs.
2 mm, grey, small (S)
5 mm, white, small (S)
5 mm, white, large (L)
#5471
#5472
#5473
#5462
71
CLEAR-BLOKKER®
Light-curing, high-transparent gel for adjusting pressure
moulded DURAN® splints, reinforced with DURASPLINT® LC.
Gel is best suited for removal of air inclusions and insertion
of canine guidance. Allows fixing of elements, such as IST®
fixing elements on DURAN® splints. UV LED lamp with wavelength of 360–420 nm or light-curing oven, such as LC-6
Light Oven (see p. 102), as well as LC-Primer (see p. 91) are
required for polymerisation.
CLEAR-BLOKKER®
#5261
4× 1.5 g, 2 × micro cannula (0.4mm) and 8 × mini-cannula
See page 42 for separate listing of cannulas.
SD-Cyano Veneer Fast / SD-Pipettes
Crystal clear, fast-curing bonding agent, can be used for
fixing elements when fabricating TAP ® or IST® splints and
for secure adhesion of screws in sleep medicine and orthodontics. SD-Pipettes ensure precise dosing of SD-Cyano
Veneer Fast by micro tip.
SD-Cyano Veneer Fast, 5 g
SD-Pipettes, 25 pcs.
#3701
#3703
SD-Metal Primer
Bonding agent for perfect adhesion of acrylics and any kind
of metal, reduces crevice corrosion. For insertion of TAP ®
elements, IST® fixing elements, polymerised retention and
clasp elements in orthodontics and prosthetic acrylics and
veneer technique.
SD-Metal Primer
#9038
5 ml
SD-Box
Retainer box for storing various orthodontic and snoring appliances such as positioners, IST® splints, TAP ®/TAP ®-T splints.
With mirror and safe closure, air slits ensure optimum airing.
Dimensions (L × W × H): 95 × 70 × 31 mm
SD-Box
blue
#5439
SD-Box
SD-Box
red
green
#5437
#5438
10 pcs.
72
OPM
For simple fabrication of a pressure moulded OPM protrusion
splint in snoring therapy. Activation is done in 1 mm steps by
replacing the plastic bars on both sides.
OPM-Kit
Comes with 6 pair plastic bars (25 – 30 mm),
4× fixing elements with O-rings, 1 x CETRON®
Cleansing Powder, Occlusion trainer, sample
silicone protection tube
OPM plastic bars, 6 pair
(25 – 30 mm)
#5495
#5494
myTAPTM *
Diagnostic testing appliance for getting acquainted with the
simple and patient-friendly treatment of snoring and sleep
apnoea. Metal-free and easy adjustable trays enable protrusion up to 20 mm, assuring considerable lateral mobility.
myTAPTM
#9070
Upper and lower jaw protrusion tray with 2 nuts,
storing box and instruction
Occlusion trainer
Condylar reposition device for patients’ training after wearing
protrusion splints during the night.
Occlusion trainer
#5470
10 pcs.
*can be sold only to dentists, orthodontists, clinicians
73
TAP® Standard
Thornton Adjustable Positioner (TAP ®) enables controlled
and effective treatment of snoring and sleep apnoea.
TAP ® has been developed by the American dentist and
engineer Dr. Keith Thornton.
TAP® Standard Set
Set comes with TAP® hook, hexagon socket
wrench, Occlusion trainer, 5 bags of 15 g
CETRON® Cleansing Powder, SD-Box blue
and patient information
Cover plate incl. 2 screws
Positioning Support with socket wrench
#9000
#9015
#9016
TAP®-T
Developed on the basis of TAP ® Standard, nickel-free
components for optimum biocompatibllity. Upper protrusion
ajdustment device can be continusouly activated up to 7 mm.
Reactivation is possible.
Also available as preassembled set.
TAP®-T Set
#9030
Set comes with TAP® case, upper protrusion adjustment device made of titanium and lower guiding
device made of nickel-free CoCr-alloy, mounting
device, activation key, Occlusion trainer,
5 bags of 15 g CETRON® Cleansing Powder,
CETRON® cleansing box, patient information
TAP®-T Set pre-assembled
#9030.2
Set comes with TAP case, upper protrusion adjustment device made of titanium and lower guiding
device made of nickel-free CoCr-alloy, pre-assembled with sticky wax, mounting device, activation
key, Occlusion trainer, 5 bags of 15 g
CETRON® Cleansing Powder, patient information
®
Mounting device**, 5 pcs.
#9039
**Figure Mounting Device on page 75
TAP® Splint Case for patients
Zipped case for storing and carrying TAP® and TAP®-T splints.
TAP® Splint Case for patients
74
#9082
TAP® products can be delivered exclusively to certified participants of the TAP® technical course.
TAP®-T Reverse
TAP ®-T Reverse incorporates a reduced upper protrusion
adjustment device made of titanium. It has been developed
in particular for patients with deep bite. Lower protrusion is
adjusted by activation key (palatal), as this reduced adjustment device can be inserted behind the upper incisors in
the DURASOFT® splint. Reactivation is possible.
Also available as pre-assembled set.
TAP®-T Reverse Set
#9050
Set comes with TAP® case, reduced upper adjustment protrusion device made of titanium, lower
guiding device made of CoCr-alloy, mounting
device, activation key, Occlusion trainer,
5 bags of 15 g CETRON® Cleansing Powder,
CETRON® cleansing box and patient information
TAP®-T Reverse Set, pre-assembled
#9050.2
Set comes with upper adjustment protrusion
device made of titanium and lower guiding device
made of CoCr-alloy, pre-assembled with
sticky wax, mounting device, activation key,
Occlusion trainer, 5 bags of 15 g CETRON®
Cleansing Powder, CETRON® cleansing box and
patient information
Mounting device, 5 pcs.
#9039
2 mm additional mobility!
12 mm
TAP®-T XL Lower Guiding Device
Increased version for more wearing comfort (2 mm
additional mobility). Can be used with TAP ®-T and TAP ®-T
Reverse upper protrusion adjustment devices.
TAP®-T XL Lower Guiding Device
#9029
TAP®-T / TAP®-T Reverse Starter-Set
Simplified mounting thanks to combination of TAP®-T resp.
TAP®-T Reverse upper protrusion adjustment device and
TAP®-T lower guiding device pre-assembled with sticky wax.
**
TAP®-T Starter-Set
Set comes with pre-assembled TAP®-T positioning
support, activation key, SD-Box blue, patient
information
TAP®-T Reverse Starter-Set
Set comes with pre-assembled TAP®-T Reverse
positioning support, activation key, SD-Box blue,
patient information
#9031
#9051
TAP®-T Matrix*
Reusable auxiliary made of heat-resistant silicone for efficient fabrication of the sticky wax spacer. Makes sure the
titan hook runs free in the guiding device in the lower splint.
TAP®-T Matrix, 2 pcs.
#9037
*not to be used with TAP®-T XL Lower Guiding Device
TAP® products can be delivered exclusively to certified participants of the TAP® technical course.
75
50 Years of Competence and
Experience.
Tried and tested. Our pressure moulding material has been tested according
to the International Guidelines ISO 10993 and ISO 7405 with the result that it
has been released for clinical use. The barcode on each blank ensures quick
and simple handling.
Pressure Moulding
Technique
BIOCRYL® C
Break-resistant acrylic material of pure PMMA, monomer-free, without allergenic irritants, bonds to acrylic.
Application
Immediate dentures, orthodontic plates and retainers
2.0 × 125 mm*
2.0 × 125 mm**
2.0 × 125 mm**
2.0 × 125 mm**
2.0 × 125 mm*
3.0 × 125 mm*
clear
red
blue
yellow
rose-transparent
clear
#3147
#3149
#3150
#3151
#3152
#3153
* 10/100 pcs. ** 10 pc.
BIOCRYL® M
Hard-elastic, monomer-free material, without allergenic
irritants, bonds to acrylic.
Application
Orthodontic plates and retainers
2.0 × 125 mm
2.0 × 125 mm
2.0 × 125 mm
2.0 × 125 mm
2.0 × 125 mm
2.0 × 125 mm
Multicolor-Set*
Polka-Dots
Zebra
Rainbow
Tiger
Camouflage
#3228
#3229
#3230
#3231
#3232
#3233
10 pcs. * 5 × 2 pcs.
DURAN®
Hard-elastic transparent material, bonds to DURASPLINT®
and DURASPLINT® LC acrylics. Apply LC-Primer prior to
using DURASPLINT® LC. No pre-drying.
Application
Miniplast splints, occlusal splints, interim splints, fluorisation splints, drilling/X-ray templates, anti-snoring appliances,
invisible retainers, temporary crowns and bridges.
78
0.5 × 125 mm
0.625 × 125 mm
0.75 × 125 mm
1.0 × 125 mm
1.5 × 125 mm
2.0 × 125 mm
3.0 × 125 mm
10/100 pcs.
#3411
#3409
#3413
#3415
#3417
#3419
#3421
DURAN®+
Hard-elastic transparent material, bonds to DURASPLINT®
and DURASPLINT® LC acrylics. Apply LC-Primer prior to
using DURASPLINT® LC. With integrated insulation foil.
No pre-drying.
Application
Miniplast splints, occlusal splints, interim splints, fluorisation splints, drilling/X-ray templates, temporary crowns and
bridges, anti-snoring appliances, invisible retainers
0.5 × 125 mm
0.625 × 125 mm
0.75 × 125 mm
1.0 × 125 mm
1.5 × 125 mm
2.0 × 125 mm
#3426
#3428
#3430
#3432
#3434
#3436
10/100 pcs.
Now available: 0,625 mm material thickness!
DURAN ®+ A2 pd
New material in proven DURAN® quality now available in
aesthetic A2 colour. With integrated insulation foil. Predried and individually vacuum packed for instant use.
Application
Tooth-coloured temporaries, splints for planning and
demonstration for aligner treatments
0.5 × 125 mm
0.625 × 125 mm
0.75 × 125 mm
#3422
#3424
#3423
10 pcs.
DURASOFT® pd
Break and abrasion resistant compound material – hard on
one side and soft on the other. The hard side bonds to acrylic,
already pre-dried and vacuum sealed for instant use.
Application
Miniplast splints, bruxism and occlusal splints.
1.2 × 125 mm*
1.8 × 125 mm*
2.5 × 125 mm*
3.0 × 125 mm**
4.0 × 125 mm**
hard/soft: 0.7 mm/0.5 mm
#3342
#3388
#3387
#3341
#3345
*10/100 pcs. ** 10 pcs.
79
DURASOFT® blue pd
The proven break and abrasion resistant compound material,
in blue-translucent colour. Pre-dried and individually vacuum
packed for instant use.
Application
For simple fabrication of coloured intraoral anti-snoring appliances. Blue colour increases aesthetics.
1.8 × 125 mm
#3347
2.5 × 125 mm
#3348
10 pcs.
DURASOFT® seal
Pressure moulding material made of thermoplastic polyurethane for use with DURASOFT® pd, forms a robust inner
layer of hard/soft splints providing good resistance against
discolouration. Also available in blue and magenta.
Application
Discolouration-resistant inner layer for DURASOFT® pd
splints, especially for long-term use splints such as intraoral
anti-snoring appliances.
0.1 × 125 mm
0.1 × 125 mm
0.1 × 125 mm
10 pcs.
80
clear
blue
magenta
#3338
#3339
#3337
BIOPLAST® XTREME Kit*
Two different degrees of hardness in one pressure moulding
blank thanks to the integrated reinforcement in the delicate
anterior region, absorbs hard and flat impacts in contact
sports. V-shaped harder insert for variable size of front
tooth protection.
Kits come with 1 BIOPLAST® XTREME (5.0 × 125 mm), 1 bag of
15 g CETRON® Cleansing Powder, 1 BIOPLAST® insulating agent,
retainer box.
BIOPLAST® XTREME Kit*, red
BIOPLAST® XTREME Kit*, blue
BIOPLAST® XTREME Kit*, black
#3283
#3284
#3285
1 pc.
* only for MINISTAR® from 4/92 and BIOSTAR® from 4/99
BIOPLAST® XTREME PRO Kit*
For professional sports where hard and flat impacts often
occur. Additional hard-elastic layer for integrated reinforcement in the anterior region.
Kits come with 1 BIOPLAST® XTREME (4.0 × 125 mm),
1× BIOPLAST® (2.0 × 125 mm), 1× DURAN® (0.75 × 125 mm), 1×
bag of 15 g CETRON® Cleansing Powder,
1 BIOPLAST® insulating agent, retainer box
BIOPLAST® XTREME PRO Kit*, red
BIOPLAST® XTREME PRO Kit*, blue
BIOPLAST® XTREME PRO Kit*, black
#3292
#3293
#3294
1 pc.
* only for MINISTAR® from 4/92 and BIOSTAR® from 4 /99
BIOPLAST® XTREME*
BIOPLAST® XTREME material is best suited for simple
and secure fabrication of individual mouth guard. A hard
V-shaped reinforcement layer ensures additional protection
in the anterior region, allowing precise positioning and
dimensioning. Soft layer can be used for lamination with
BIOPLAST® or for insertion of the counter bite.
4.0 × 125 mm
4.0 × 125 mm
4.0 × 125 mm
4.0 × 125 mm
red
blue
black
clear
#3295
#3296
#3297
#3298
5.0 × 125 mm
5.0 × 125 mm
5.0 × 125 mm
5.0 × 125 mm
red
blue
black
clear
#3286
#3287
#3288
#3289
10 pcs. *only for MINISTAR® from 4/92 and BIOSTAR® from 4/99
81
BIOPLAST® XTREME Deco*
The proven XTREME material for the fabrication of individual
mouth guards is also available in many individual designs.
A new manufacturing technology enables photo-realistic,
multi-colour designing. Doesn’t bond to acrylics.
5.0 × 125 mm
5.0 × 125 mm
5.0 × 125 mm
5.0 × 125 mm
5.0 × 125 mm
5.0 × 125 mm
chinese
dragon
kiss
aqua
stone
lion
#3312
#3313
#3314
#3315
#3316
#3317
5 pcs. * only for MINISTAR® from 4/92 and BIOSTAR® from 4/99
BIOPLAST® Color
Soft, pliable rubber like material, does not bond to acrylic.
Application
Coloured mouth guard, positioner
3.0 × 125 mm
3.0 × 125 mm
3.0 × 125 mm
3.0 × 125 mm
3.0 × 125 mm
3.0 × 125 mm
3.0 × 125 mm
3.0 × 125 mm
blue-transparent
red-transparent
white
black
neon red
neon green
azure blue
Colour-Set
#3356
#3355
#3445
#3448
#3352
#3353
#3354
#3271
5.0 × 125 mm
5.0 × 125 mm
5.0 × 125 mm
blue-transparent
neon red
neon green
#3362
#3364
#3366
10 pcs.
BIOPLAST® Multicolor
Soft, pliable rubber like material, does not bond to acrylic.
Application
Multi-coloured mouth guard, positioner
3.0 × 125 mm
3.0 × 125 mm
3.0 × 125 mm
3.0 × 125 mm
3.0 × 125 mm
3.0 × 125 mm
3.0 × 125 mm
3.0 × 125 mm
3.0 × 125 mm
3.0 × 125 mm
3.0 × 125 mm
10 pcs.
82
Germany
France
Italy
Spain
Sweden
Brazil
Transylvania
Atlantis
White Dots
Green Dots
Multicolor-Set
#3390
#3391
#3392
#3393
#3394
#3395
#3396
#3397
#3398
#3399
#3400
BIOPLAST®
Soft pliable rubber like material, does not bond to acrylic,
clear-transparent.
Application
Model duplications, mouth guard, bruxism splints, positioner,
bleaching splints, OSAMU-Retainer®
1.0 × 125 mm
1.5 × 125 mm
2.0 × 125 mm
3.0 × 125 mm
4.0 × 125 mm
5.0 × 125 mm*
BIOPLAST® bleach
Soft pliable rubber like material, best suited for fabrication of
bleaching splints, does not bond to acrylic.
1.0 × 125 mm
#3190
10/100 pcs.
#3270
#3183
#3185
#3187
#3188
#3374
10/100 pcs. * 10 pcs.
BRUX CHECKER® according to Prof. Sato
Foil with one-sided colour coating for analysis and treatment
planning as well as for control of prosthetic restorations.
0.1 × 125 mm
#3209
10 pcs.
Manual “Diagnosis of occlusion in bruxism” (Kanagawa Dental College, Japan) can be found at
www.scheu-dental.com/en/downloads/other
83
IMPRELON®
Hard material, bonds to acrylic.
Anwendung
Material in clear and opaque for impression and medical
trays, material in white for chin caps and bite registration
2.0 × 125 mm
3.0 × 125 mm*
3.0 × 125 mm
3.0 × 125 mm
clear
clear
white
opaque
#3164
#3168
#3274
#3361
10 pcs. * 10/100 pcs.
New formulation!
IMPRELON® S pd
Extremely break- and abrasion resistant material in new
formulation. Pre-dried and individually vacuum packed for
instant use.
Application
OSAMU-Retainer®, Miniplast splints, occlusal and retention
splints.
0.5 × 125 mm*
0.75 × 125 mm*
1.0 × 125 mm*
1.5 × 125 mm
2.0 × 125 mm
3.0 × 125 mm
10 pcs. * 10/100 pcs.
Available again!
Transparent retainer according to Dr. Yoshii. Pressure-moulded
using BIOPLAST® 1.5 mm and IMPRELON® S pd 0.75 mm and
OSAMU-Bond for optimal compound of material.
OSAMU-Retainer® kit for fabrication of 10 retainers.
All components available separately.
10 IMPRELON® S pd (0.75 x 125 mm),
10 BIOPLAST® (1.5 x 125 mm),
10 ml OSAMU-Bond
1 pc.
84
#3242
clear
clear
clear
clear
clear
clear
#3320
#3322
#3324
#3326
#3328
#3330
COPYPLAST®
Visco-elastic material, opaque, does not bond to acrylic.
Application
Model duplications, bleaching splints, bracket transfer trays,
copings, moulds for temporary crowns and bridges
0.5 × 125 mm
0.75 × 125 mm
1.0 × 125 mm
1.5 × 125 mm
2.0 × 125 mm
#3177
#3169
#3179
#3175
#3181
10/100 pcs.
COPYPLAST® C
High-transparent, visco-elastic material, unbreakable and
abrasion resistant, does not bond to acrylic.
Application
Long term and invisible retainers, orthodontic splints
1.0 × 125 mm
#3403
10/100 pcs.
HARDCAST®
Hard-elastic material, does not bond to acrylic, combustible
leaving no residue, opaque.
Application
Copings, spacer foil for bleaching splints
0.4 × 125 mm
0.6 × 125 mm
0.8 × 125 mm
#3194
#3195
#3200
10 pcs.
85
Indirect Bonding
Indirect bonding for precise transfer of bracket position and
considerable reduction of treatment time.
Thanks to specifically designed SD-products (p. 86/87) you
can quickly and simply succeed in producing the transfer
matrix in your own laboratory.
SD-Bond
Water soluble, thixotrophic adhesive for temporary fixing and
positioning of brackets on the model. Optimum curing times
and complete water solubility.
SD-Bond, 5 cartridges of 3 ml,
with cannula (Ø 1.2 mm)
SD-Silicone
Silicone with excellent pouring and adhesive characteristics
for fabricating bracket transfer trays. For blocking-out and
precise, stable fixing of brackets on the models during pressure moulding. Can be removed leaving no residue. Comes in
two-component syringe, with 15 mixing cannula.
SD-silicone, double cartridge (2 × 10ml)
with 15 mixing cannula
#3603
SD-Scalpel
Scalpel for precise orientation cuts in the bracket-transfer foil in
the bracket slot area, serving as basis for the future extension of
the tray and for finishing.
SD-Scalpel with 6 blades
86
#3604
#3602
SD-Cutter
Smooth knife for precise reduction of the tray below the
bracket slot. Blade can be fixed for precise cuts, further
finishing isn’t required.
SD-Cutter
#3605
SD-Separating Disc, serrated
Separating discs for precise and smooth cuts in the bracket
transfer foil in the bracket slot area, serving as basis for the
future extension of the tray and for finishing. Can also be
used for finishing DURAN® material.
3 discs with mandrel
#3606
SD-Bracket Pincers
Pincers with extra-fine tip for inserting and removing
brackets from pressure-moulded bracket transfer mask.
Made of stainless steel, sterilisable.
SD-Bracket Pincers
#3607
SD-Bracket Remover
For removing brackets from pressure-moulded bracket
transfer mask and for easier removal of bracket transfer mask from patient’s mouth. Made of stainless steel,
sterilisable.
SD-Bracket Remover
#3608
87
BLUE-BLOKKER®
4× 1.5 g, 2 micro cannula (Ø 0,6 mm) and
8 mini cannula
Mini cannula* (Ø 0,9 mm)
#5276
#5277
#5264
#5278
BLUE-BLOKKER®
Light-curing, blue translucent blocking out and modelling
material with excellent flow characteristics. For fabrication
of space maintainers for bleaching splints and medical trays
and for sealing saw cuts in set-up models. Combustible,
leaving no residue, can therefore also be used in prosthetics
when fabricating fixed or removable prosthesis. Telescope
constructions are stable and can be removed without tension.
Curing in wavelength range of 380– 470 nm.
* 5 pcs.
Spacer Foil
For fabrication of copings, will be removed before embedding
the model, clear.
0.1 × 125 mm
100 pcs.
88
#3202
ISOFOLAN®
Ensures optimum insulation for plaster against acrylic in
the pressure moulding technique. Best suited as spacer foil
when pressurising hard-elastic material for splints.
0.1 × 125 mm
100 pcs.
#3207
SIL-KITT
Permanently plastic transparent silicone, used in particular
for blocking-out undercuts in pressure moulding splints,
antisnoring and orthodontic appliances. Also available in red.
SIL-KITT red
SIL-KITT transparent
#3442
#3443
Blocking-out Putty
Permanently plastic putty for blocking-out undercuts.
150 g
Blocking-out Putty
#3220
250 g
Insulation for plaster models when using BIOPLAST® material
for fabricating positioners and mouth guards.
BIOPLAST® Insulating Agent provides absolute transparency and smooth inner surfaces. Also available in practical
applicator bottle of 100 ml for quick and non-drip insulation
of plaster models.
BIOPLAST® Insulating Agent, 100 ml
Applicator bottle with 3 tips
BIOPLAST® Insulating Agent, 500 ml
#3166
#3189
Foam Discs
Foam discs can be used as space holder and insulation for
pressure moulded impression trays, providing retention to
impression material.
Foam Discs (Ø 103 mm)
#3444
10 pcs.
89
DURASPLINT®
High-transparent cold-cure resin in particular for fabricating
occlusal splints with adjusted occlusion. Very simple to use,
little shrinkage, easy trimming.
DURASPLINT® Kit
#3257
it comes with 200 g polymer and 100 ml mono K
mer, dosing and mixing bowls, 20 ml orthodontic
insulating agent with brush, pipette, glass spatula
and detailed instruction.
DURASPLINT® Polymer, 200/400 g
#3258
DURASPLINT® Monomer,100/250 ml
#3259
BIOCRYL®-RESIN
Special orthodontic acrylic for attaching clasp arms and
expansion screws when fabricating retention and expansion
plates using BIOCRYL® C and BIOCRYL® M. Material poly
merises during the cooling phase in the pressure moulding
unit. No time-consuming polymerisation in pressure pot.
BIOCRYL®-RESIN Polymer, 400/1000 g
BIOCRYL®-RESIN Monomer,250/500 ml
#3221
#3218
Skin Packaging
Protection packaging for sending out high quality models,
consisting of cardboard and coating foil.
Skin Packaging
Coating foil (0.15 × 125 mm)
Protection cover for study and orthodontic models
100 pcs.
90
#3206
#3203
DURASPLINT® LC
Light-curing, transparent resin, in particular for adjusting
DURAN® splints with minimal thickness of 1.5 mm. Doesn’t
require curing in pressure pot. We recommend LC-6 Light
Oven (see p. 102) with pre-set polymerisation times of 5 or
10 min. Curing in the range of 350–450 nm. Preliminarily
apply LC-Primer to DURAN® splint.
No yellow discolouration of material after light-curing.
DURASPLINT® LC Kit
#3256
Kit comes with 3 bars of 38 g DURASPLINT® LC,
1.5 g CLEAR-BLOKKER® with 2 mini cannula,
10 ml LC-Primer with brush, 10 g LC-Insulation,
1 LC-Bur A, B and C, 1 SD-Polishing Paste A and B,
5 SD-Polishing Brushes, 5 SD-Felt Wheels and
5 SD-High-Gloss Polishing Mops with mandrel
DURASPLINT® LC, 3 bars of 38 g
W × L × H: 32 × 120 × 8 mm
#3261
CLEAR-BLOKKER®
Light-curing, high-transparent gel for adjusting pressure
moulded DURAN® splints, reinforced with DURASPLINT® LC.
Gel is best suited for removal of air inclusions and insertion of
canine guidance. Allows fixing of elements, such as IST® fixing
elements on DURAN® splints. UV LED lamp with wave length
of 360-420 nm (as e.g. LC-Mini Light, please see page 102) or
light curing oven (as e.g. LC-6 Light Oven, please see page 102)
and LC primer are required for polymerisation.
CLEAR-BLOKKER®
#5261
4× 1.5 g, 2 micro cannula (Ø 0,4 mm) und 8 mini cannula
See page 46 for separate listing of cannulas.
LC-Primer
Light-curing primer for preparing DURAN® splints before
building-up with DURASPLINT® LC or CLEAR-BLOKKER®.
We recommend LC-6 Light Oven (see p.102) with pre-set
polymerisation times of 5 or 10 min. Curing in the range of
350–450 nm.
LC-Primer, with brush
#3263
10 ml
91
LC-Insulation
Facilitates modelling DURASPLINT® LC for adjusting DURAN®
splints. Ensures clean and neat working results with smooth
surfaces, considerably simplifying finishing.
LC-Insulation
#3266
10 g
SD-Composite Primer
Bonding agent for fabrication of temporary crowns and
bridges in the dental pressure moulding technique. Primer
ensures a secure adhesion between composite resin (also
cartridge dispensing systems) and DURAN®. Brush for easy
application of primer is integrated in bottle cover.
SD-Composite Primer
#3705
25 ml
OSAMU-Bond
Bonding agent for optimal compound of BIOPLAST® and
IMPRELON®S pd in the pressure moulding technique.
OSAMU-Bond
10/100 ml
92
#3246
C
A
B
NEW! LC-BUR C
LC-Bur
In particular for finishing cold cure resin or light-cured
adjustments on splints. Allows neat cutting without clogging
or leaving any residue. LC-Bur A comes in concial form for
specific finishing or occlusal grinding. LC-Bur B is pearshaped, ensuring very smooth grinding surface patterns
when it comes to larger surfaces.
The bud form of LC-Bur C ensures quick and uniform
removal of roughness.
LC-Bur A
LC-Bur B
LC-Bur C
#3267
#3268
#3265
SD-Polishing Brush with mandrel
SD-Felt Wheel with mandrel
SD-High-Gloss Polishing Mop with mandrel
#3712
#3713
#3714
SD-Polishing Paste
In particular for finishing (SD-Polishing Paste A) and for
highgloss polishing (SD-Polishing Paste B) of splints adjusted
with DURASPLINT® or DURASPLINT® LC. Can also be used
for polishing orthodontic appliances.
SD-Polishing Paste A, bar of 60 g
SD-Polishing Paste B, bar of 100 g
#3710
#3711
SD-Polishing Brush
High-quality goat hair brush with micro fiber insert, for use
in combination with SD-Polishing Paste A and B for polishing
adjusted splints and orthodontic appliances.
SD-Felt Wheel
For use in combination with SD-Polishing Paste A and B for
polishing adjusted splints and orthodontic appliances.
Extra soft mop structure for finishing and high-gloss
polishing of adjusted splints and orthodontic appliances.
5 pcs.
93
Stable, handy plastic handles which can be fixed to tray with
cold cure resin and individually formed by heating.
#3216
10/100 pcs.
SD-Foil Lifter
Instrument ensuring easy removal of pressure moulded
splints from model. In particular when using dental arcade
models, such as CA DIGITAL models, which won’t be
damaged.
Spatula width: 2 mm on both sides
Length: 165 mm
SD-Foil Lifter
#3464
1 pc.
SD-Foil Scissors A
SD-foil scissors A are made of a high-quality autoclavable
stainless steel alloy. For better handling, scissors are curved
laterally. Micro serration prevents slipping.
SD-Foil Scissors A
1 pc.
94
#3460
Pellet Cover
Used for covering stainless steel pellets while pressurising
splints. Cover is reusable and avoids adhesion of pellets to the
heated soft material.
Pellet Cover, big
Pellet Cover, small
#3006
#3007
5 pcs.
Stainless steel pellets, highly polished by galvanic treatment
for embedding models in pressure moulding machines.
Thanks to the cylindrical pellet form models are securely
positioned and can’t be pressed into the pellets.
#3222
1000 g
Pellet Brush
With integrated magnet for quick removal of pellets and
lifting up the model platform from the model cup.
Pellet Brush
#3136
1 pc.
SD-Foil Scissors B
Robust and durable scissors for cutting splints or inserting
cuts into splints after pressurising.
SD-Foil Scissors B
#3461
1 pc.
95
Finishing Set
Assortment containing 8 grinding instruments with coloured
marking for easy identification – for cutting and finishing of
soft-elastic and hard-elastic material.
Finishing Set
#3378
Set comes with cutting bur, finishing bur, HM Carbide
Bur, HM-Tricutter fine, BIOPERM-Trimmer, POLYFIX,
OSAMU Polisher, DIMO®PRO SLIM, dressing stone
1 pc.
Cutting Bur
Spiral cutting bur for quick, neat cutting of hard pressure
moulding material.
HM Carbide Cutter
Triangle cutting bur for quick, neat cutting of hard pressure
moulding material.
HM-Tricutter fine
Fine triangular bur for interdental finishing of splints.
Finishing Bur
Square cutting bur made of special soft alloy that won’t
damage clasps and wires.
Cutting Bur (no marking)
HM Carbide Cutter (yellow)
HM-Tricutter fine (green)
Finishing Bur (red)
6 pcs.
96
#3214
#3369
#3370
#3377
BIOPERM-Trimmer
For trimming of soft-elastic and compound material.
POLYFIX
Disc for trimming of soft-elastic and compound material.
OSAMU-Polisher
For finishing and polishing of soft-elastic and compound
material.
BIOPERM-Trimmer, blue, 2 pcs.
POLYFIX on mandrel, brown, 1 pc.
POLYFIX, brown, 6 pcs.
OSAMU-Polisher, grey, 2 pcs.
#3226
#3371
#3372
#3247
DIMO®PRO / DIMO®PRO SLIM
Trimming wheel made of special elastomer with fine
fibrous structure, extremely long working time, with
mandrel.
DIMO
Stable and flexible trimming wheel with extended working
time, three types of grains with mandrel.
®
Application
Trimming and initial polishing of elastomer, sandwich material, mouth guard and orthodontic appliances
DIMO®
DIMO®
DIMO®
DIMO® mandrel
10 pcs. * 10/50 pcs.
brown, coarse*
green, medium*
maroon, fine*
#3382
#3383
#3384
#3380
Application
DIMO®PRO: For finishing rims and for final and high-gloss
polishing of splints, positioners, mouth guard and orthodontic appliances. Provides highly-polished rims and uniform
surfaces of hard/soft compound material.
DIMO®PRO SLIM: for finishing splints, in particular interdentally and in the area of ligaments
DIMO®PRO
DIMO®PRO SLIM*
disc 24 × 6 mm
disc 24 × 4 mm
#3381
#3376
10/50 pcs. * reduced rim
97
Laboratory
Equipment
We are setting benchmarks!
We are setting benchmarks, instead of just meeting
standards. From the O-ring to the microprocessor control – our equipment manufacturing specialists know
their stuff. All parts are manufactured with maximum
precision and attention to detail.
98
99
Split-Fixator
Stable occlusal holder with sliding arms. By unscrewing the
centring tips, models can be removed without any damage
and reinserted at any time in exactly the same position.
Precise dovetailed guidance avoids twisting of fixator arms.
Split-Fixator
Münster separating plate
For exact separation of upper and lower jaw
#5380
#5381
Hinge Fixator
Thanks to the hinge in the upper part of the fixator, grinding of functional orthodontic appliances and fabricating of
bimaxillary appliances becomes easier. Mounting splints on
fixator arms ensure easy removal and exact reposition of
models.
Hinge Fixator
Peaked screws, 10 pcs.
Mounting Splints
For Hinge Fixator.
Mounting Splints
10 pcs.
100
#5375
#5374
#5376
Model Holder
With flexible clamps and movable joints, keeps small and
large models fixed in any required position.
Model Holder
#5270
1 pc.
Parallelometer
Indispensable auxiliary for fabricating precise adjusted
splints, for fixing the insertion direction and marking the
tooth equator. It is essential to make sure the extension
of an adjusted splint made of DURAN®/DURASPLINT® LC
doesn’t exceed the tooth equator, as otherwise cracks or
fissures may occur when inserting or removing the splint.
Parallelometer
with model holder, graphite leads
and accessories for measurement
#5362
1 pc.
101
LC-6 Light Oven
High-capacity light polymerisation unit for up to 4 models or
fixator. Its inner dimensions of 170 × 160 × 120 mm
(W × D × H) offer enough space for articulated and mounted
models. 6 fluorescent light tubes (3 UVA and 3 blue light
tubes) and an aluminium reflector guarantee homogeneous
illumination. 2 polymerisation times of 5 and 10 min. are
already pre-set in accordance with the light-curing material
DURASPLINT® LC. Continuous operation can also be set.
Spectral range between 350 and 450 nm.
Auto start function for easier application.
Power: 230/115 V
Dimensions (W × H × D): 240 x 180 x 270 mm
Weight: 3 kg
LC-6 Light Oven 230 V
LC-6 Light Oven 115 V
#5610
#5620
NEW!
LC Mini Light
LED polymerisation lamp with 14 LEDs, developed for
fixing and initial polymerisation of DURASPLINT® LC and
CLEAR-BLOKKER®. Best suited also for fixing of mounting
parts of IST® or OPM devices in combination with LC–Primer
REF 3263. Final light polymerisation in light curing oven,
such as LC-6 Light Oven.
Use with customary AAA batteries.
Wave length: 350-420 nm
Weight (without batteries) 96g
Length (without shade):120mm
LC Mini Light with shade
#5606
Heating Support
Can be attached to the heater when fabricating positioners
and mouth guard. Provides the optimum distance between
model and heater while heating the occlusal surfaces and
ensures good compound of upper and lower splint.
Heating Support for BIOSTAR® and MINISTAR S® #3452
Model Platform
Model platform with 85 mm diameter provides increased
surface for dental arcade models of resin and hard plaster,
preventing the model from getting pressed into the stainless steel pellets.
Model Platform, Ø 85 mm
102
#3134
New generation!
BIOSTAR®
Versatile pressure moulding machine for all applications
in dental pressure moulding and orthodontics with scan
technology and max. 6.0 bar working pressure. The unique
thermally controlled infrared heater reaches working temperature in one second. All important data such as temperature,
heating and cooling times are programmed by reading the
scanner or entering the corresponding code. The coloured
3.2˝ LCD display with a resolution of 320 × 240 pixel leads
you through the single working steps of the pressure moulding process, providing further information on the scanned
material, its indication as a well as a library with illustrated
application hints for fabrication and videos. USB port for
trouble-free updates. Large model cup facilitates embedding
of mounted models. Pellet container ensures optimum dispensing and storing of pellets.
Power: 230/115/100 V, 750 W
Working pressure: 0.5 – 6.0 bar
Dimensions (W × H × D):450 × 230 × 260 mm
Weight: 14 kg
BIOSTAR® 230 V
BIOSTAR® 115 V
BIOSTAR® 100 V
BIOSTAR® protection cover made of
transparent plastic material, avoids soiling
#3001
#3011
#3021
#3449
103
MINISTAR S®
The new generation of the successful handy pressure
moulding machine MINISTAR® S equipped with scan
technology. Scanner reads the coded material, allowing
programming of all important data such as heating time,
temperature and cooling time. In other words: Precise
pressure moulding results are reached in record time thanks
to the extremely fast, patented heater and working pressure
of max. 4.0 bar.
Power: 230/115/100 V, 750 W
Weight: 9 kg
MINISTAR S® 230 V
MINISTAR S® 115 V
MINISTAR S® 100 V
MINISTAR S® protection cover made of
transparent plastic, avoids soiling
#3500
#3510
#3520
#3447
Sampler of Pressure Moulding Material
Sampler of all available pressure moulding materials with
information on thickness, diameters and colours. Helpful
information on working procedures and chemical and
physical data is given as well.
Sampler of Pressure Moulding Material
104
#3137
TWINSTAR® P
Pressure moulding machine for basic dental applications
in the pressure moulding technique such as temporaries,
splints, mouth guard, bite registrations and individual
impression trays.
Characteristics
Medium-wave, time-controlled infra-red heater, pre-set cooling phase, max. 2 bar working pressure, range of material
0.1–3.0 mm, heating of the material side which is directly
placed over the model, large model cup and ergonomic pellet
container, simple and functional “one-switch-operation”.
Power: 230/115/100 V, 340 W
Weight: 7.5 kg
TWINSTAR® P 230 V
TWINSTAR® P 115 V
TWINSTAR® P 100 V
#3140
#3141
#3138
TWINSTAR® V 230 V
TWINSTAR® V 115 V
TWINSTAR® V 100 V
#3142
#3143
#3139
TWINSTAR® V
Vacuum machine, doesn’t require compressed air connection. For all basic dental applications in the thermo-forming
technique such as temporaries, splints, mouth guard, bite
registration and individual impression trays.
Characteristics
Medium-wave, time-controlled infra-red heater, pre-set
cooling phase, range of material 0.1–3.0 mm, heating of
the material side which is placed directly over the model,
large model cup and ergonomic pellet container, easy and
functional “one-switch-operation”.
Power: 230/115/100 V, 340 W
Vacuum: 0.8 bar
Weight: 7.5 kg
105
NEW!
IMPRIMO® 90
The 3D printer IMPRIMO® 90 is the generative production
solution for the digital orthodontic laboratory. With its extensive
management software for the complete building process, the
high-performance UV-LED radiation source (385 nm) and specific materials on the base of methacrylate the IMPRIMO® 90 is
best suited for the fabrication of dental working models, splints
and further dental forming parts. Thanks to numerous pre-defined software tools it is very user-friendly. The innovative tray
system guarantees short cleansing times and low maintenance.
The integrated colour LCD allows you to control the complete
building process from start to finish. Building projects can be
stored completely in the system. No computer connection is
required after data transfer.
Power: 110 - 240 V, max. 600 W
Outer dimensions: (W x D x H): 564 x 353 x 510 mm
Building platform: (W x D x H): 125 x 75 x 100 mm
Lateral resolution: 94 µm
Z-resolution: 25 up to 100 µm
Weight: 22.0 kg
IMPRIMO® 90 Printer
IMPRIMO® 90 LC Model
IMPRIMO® 90 LC Impression
IMPRIMO® 90 LC Splint
IMPRIMO® 90 Tray
106
#6500
#6502
#6506
#6503
#6504
Material list of alloys used by SCHEU-DENTAL (Analysis in Weight-%)
Material
DIN-no.
C
Si
Mn
Cr
stainless steel
1.4021
0.16–0.25
≤ 1.0
≤ 155
stainless steel
1.4034
0.43– 0.5
≤ 1.0
stainless steel
1.4116
0.45–0.55
stainless steel
1.4301
stainless steel
S
12.0–14.0
≤ 0.040
≤ 0.015
CARAT®
≤ 1.0
12.5–14.5
≤ 0.040
≤ 0.015
CARAT®
≤ 1.0
≤ 1.0
14.0–15.0 0.5–0.8
≤ 0.07
≤ 1.0
≤ 2.0
17.5–19.5
8.5–10.5
≤ 0.045
≤ 0.015
Rest
SCHEU-anchor,
Clasps/Bars
1.4303
≤ 0.06
≤ 1.0
≤ 2.0
17.0–19.0
11.0–13.0 ≤ 0.045
≤ 0.015
Rest
Profi-Bar
stainless steel
1.4305
≤ 0.10
≤ 1.0
≤ 2.0
17.0–19.0
8.0–10.0
≤ 0.045 0.15–0.35
Rest
Adamik-ancor
stainless steel
1.4310
0.05–0.15
≤ 2.0
≤ 2.0
16.0–19.0
6.0–9.0
≤ 0.045
≤ 0.03
Rest
CHROMIUM
Preformed Wires
stainless steel
1.4456
≤ 0.1
≤ 1.0
≤ 0.2
≤ 0.050
≤ 0.05
Rest
MENZANIUM®
Material
DIN-no.
Titan Grade 5
1.4021
Fe
MN
0.25
≤ 0.1
Ni
Mo
Ti
≤ 0.8
Si
Rest
CATAMOLD®
P.A.N.A.C.E.A.
≤ 0.1
Rest
10– 16.5 – 3.0 –
12.0 17.5 3.5
≤ 1.0
CATAMOLD®
17-4 PH
3.5
Rest
≤ 0.1
15.0 –
17.5
≤ 1.0
Fe
V 0.1– 0.2
16.0–20.0 16.0–20.0 1.8–2.5
Cr
Others
Product Name
Product Group
P
Ni
Mo
C
Al
O
0.08
5.5 –
6.75
0.2
H
N
0.015 0.05
CA-pliers
V ≤ 0.2
N 0.7 – 1.0
V
Cu
Nb
3.5 –
4.5
CARAT®
0.75–
0.9
0.2
Product Name
Product Group
CARAT®
3.5
0.15 –
0.45
CA-pliers
Measuring
mm
Inch
°C
°F
DIN-no.
Material-Name
AISI
UNS
0.10
0.004
10
50
1.4021
X20Cr13
420
S42000
0.15
0.006
25
77
1.4034
X46Cr13
420C
0.40
0.016
50
122
1.4116
X50CrMoV 15
0.5
0.020
75
167
1.4035
X46CrS13
420F
0.6
0.024
100
212
1.4301
X5CrNi18-10
304
S30400
0.625
0.025
125
257
1.4303
X4CrNi18-12
305
S30500
0.75
0.030
150
302
1.4305
X8CrNiS18-9
303
S30300
0.8
0.031
180
356
1.4310
X10CrNi18-8
301
S30100
1.00
0.0394
190
374
1.4456
X8CrMnMoN18-18-2
1.15
0.045
200
392
bar
at
N/mm2
p.s.i.
1.30
0.051
210
410
1
≈ 1.02
≈ 0.1
14.504
1.50
0.059
220
428
2
≈ 2.04
≈ 0.2
29.008
2.00
0.079
250
482
3
≈ 3.06
≈ 0.3
43.511
3.00
0.118
280
536
4
≈ 4.08
≈ 0.4
58.015
4.00
0.157
300
572
5
≈ 5.10
≈ 0.5
72.519
5.00
0.197
350
662
6
≈ 6.12
≈ 0.6
87.023
25.40
1.00
400
752
7
≈ 7.14
≈ 0.7
101.526
107
Indication Chart on Applications in the Pressure Moulding Technique
Indication
Product
Recommended Thickness
Etching mask
COPYPLAST®
Occlusal splint/TMJ splint/Bruxism splint/Miniplast splint
DURAN
1.0 mm
0.75 - 1.5 mm
®
DURAN® +
1.5 mm
DURASOFT pd with DURASOFT seal
®
®
Bite taking/Bite registration
IMPRELON® white, clear
Bleaching splint
BIOPLAST® bleach
1.8 mm
2.0/3.0 mm
1.0 mm
COPYPLAST
1.0 mm
Bracket transfer mask
COPYPLAST®
0.5/0.75 mm
Model duplication
BIOPLAST® (plaster)
mind. 3.0 mm
®
COPYPLAST
2.0 mm
® (resin)
Fluorisation splint
DURAN®
1.0/1.5 mm
DURAN®+
1.0/1.5 mm
Moulds for temporary crowns and bridges
COPYPLAST®
0.5 - 2.0 mm
Copings
HARDCAST®
0.4/0.6/0.8 mm
COPYPLAST
0.5/0.75 mm
®
ImmediateDentures/temporary dentures
BIOCRYL® C (rose or clear)
2.0/3.0 mm
Template for implants/Drillings/X-ray
DURAN®
2.0/3.0 mm
Individual impression tray, functional tray
DURAN®+
2.0/3.0 mm
IMPRELON® (clear)
2.0/3.0 mm
IMPRELON® (opaque)
Invisible Retainer/Functional orthodontic splint
3.0 mm
DURASOFT pd with DURASOFT seal
®
®
DURAN®
1.2 mm
0.75/1.0 mm
DURAN®+
0.75/1.0 mm
IMPRELON®S pd
0.75 - 1.0 mm
COPYPLAST® C
1.0 mm
Insulation Foil
ISOFOLAN
Orthodontic plate/Retainer
BIOCRYL® C
2.0 - 3.0 mm
0.1 mm
BIOCRYL® M
2.0 mm
Model protection/Protective coating/Skin-packaging
Coating Foil
0.15 mm
OSAMU-Retainer® (combination BIOPLAST® and IMPRELON®S pd)
BIOPLAST®
1.5 mm
IMPRELON S pd
0.75 mm
ISOFOLAN®
0.1 mm
®
Bruxism splint (refer to "occlusal splint")
®
Spacer maintainer foil
Spacer Foil
0.1 mm
Spacer maintainer for bleaching splints
HARDCAST®
0.4/0.6/0.8 mm
Positioner
BIOPLAST®
Retention splint/Long-term retainer
COPYPLAST C
3.0 - 5.0 mm
®
DURAN®
DURAN®+
Retainer/Orthodontic plates
0.75/1.0 mm
BIOCRYL C/M
®
BIOCRYL®
Temporary Splint/Strip crown for temporary crowns and bridges
Anti-snoring splint
DURAN
3.0 mm
0.5 mm - 1.0 mm
DURAN® +A2 pd
0.5/0.75 mm
DURAN®
2.0 mm
DURAN +
2.0 mm
DURASOFT® pd with DURASOFT® seal
1.8/2.5 mm
BIOPLAST®
1.0 - 5.0 mm
BIOPLAST XTREME/XTREME PRO
4.0/5.0 mm
®
Foil for therapy planning/analysis of bruxism
BRUX CHECKER®
0.1 mm
Medical tray
DURAN®
1.0 mm
DURAN +
1.0 mm
®
108
2.0 mm (for Lower jaw 3.0)
®
®
Mouth Guard, sports protection
1.0 mm
0.75/1.0 mm
Appendix
Material Qualities
Bonds to Acrylic
Recommended Acrylic
Recommended Insulation
viscoplastic
no
Soak model shortly into water
hard-elastic
yes
DURASPLINT /DURASPLINT LC
hard-elastic
yes
DURASPLINT®/DURASPLINT® LC
hard/soft
yes
DURASPLINT®
ISOFOLAN® foil
hard/not elastic
yes
DURASPLINT
ISOFOLAN® foil
soft-elastic
no
BIOPLAST® Insulating agent/soak model into water
viscoplastic
no
viscoplastic
no
soft-elastic
no
BIOPLAST® Insulating agent/soak model into water
viscoplastic
no
hard-elastic
yes
BIOPLAST® (space maintainer)
hard-elastic
yes
viscoplastic
no
viscoplastic
no
®
®
®
ISOFOLAN® foil
viscoplastic
no
impact-resistant
yes
BIOCRYL® RESIN
ISOFOLAN® foil
hard-elastic
yes
DURASPLINT®
ISOFOLAN® foil
hard-elastic
yes
DURASPLINT
hard/not elastic
yes
DURASPLINT®
ISOFOLAN® foil or Foam Discs
hard/not elastic
yes
DURASPLINT®
ISOFOLAN® foil or Foam Discs
hard/soft
yes
®
DURASPLINT
ISOFOLAN® foil
hard-elastic
yes
DURASPLINT®
ISOFOLAN® foil
hard-elastic
yes
DURASPLINT
hard-elastic
no
ISOFOLAN® foil
viscoplastic
no
®
®
viscoplastic insulation foil
no
impact-resistant
yes
BIOCRYL® RESIN
ISOFOLAN® foil
hard-elastic
yes
BIOCRYL® RESIN
ISOFOLAN® foil
bonds to Skin cardboard
soft-elastic
no
BIOPLAST® insulating agent
hard-elastic
no
viscoplastic insulation foil
no
hard insultation foil
yes
viscoplastic
no
soft-elastic
no
viscoplastic
no
hard-elastic
yes
DURASPLINT®
hard-elastic
yes
DURASPLINT®
impact-resistant/hard elastic
yes
BIOCRYL® RESIN
ISOFOLAN® foil
impact-resistant
yes
BIOCRYL® RESIN
ISOFOLAN® foil
hard-elastic
yes
K+B Material
ISOFOLAN® foil
hard-elastic
yes
K+B Material
hard-elastic
yes
DURASPLINT®
hard-elastic
yes
DURASPLINT
hard/soft
yes
DURASPLINT®
soft-elastic
no
soft-elastic
no
hard-elastic
yes
DURASPLINT®
hard-elastic
yes
DURASPLINT
ISOFOLAN® foil
ISOFOLAN® foil
®
ISOFOLAN® foil
ISOFOLAN® foil
®
109
Product Index
REF
Product
Page
1
REF
Product
Page
REF
Product
Page
2337
Face-Bow
46
3149
BIOCRYL C
78
1002
O-Clasp
18
2338
Face-Bow
46
3150
BIOCRYL® C
78
1003
O-Clasp
18
2419
Coffin Spring
25
3151
BIOCRYL® C
78
1007
OK-Clasp
18
2434
Activator Tubes
47
3152
BIOCRYL® C
78
1009
N-Clasp
18
2436
Activator Tubes
47
3153
BIOCRYL® C
78
1010
N-Clasp
18
2439
Face-Bow
46
3164
IMPRELON®
84
1011
N-Clasp
18
2450
ORTHOFIT®-Anatomic
45
3166
89
1012
N BI-Form-Clasp
18
2451
ORTHOFIT®-Anatomic
45
3168
IMPRELON®
84
1013
NK-Clasp
19
2453
ORTHOFIT®-Line
45
3169
COPYPLAST®
85
1017
J-Clasp
20
2454
ORTHOFIT®-Line
45
3175
COPYPLAST®
85
1018
J-Clasp
20
2455
ORTHOFIT®-Line
45
3177
COPYPLAST®
85
1019
J-Clasp
20
2456
ORTHOFIT®-Line
45
3179
COPYPLAST®
85
1020
J-Clasp
20
2457
ORTHOFIT®-Line
45
3181
COPYPLAST®
85
1021
J-Clasp
20
2458
ORTHOFIT®-Omega
44
3183
BIOPLAST®
83
1022
J-Clasp
20
2459
ORTHOFIT®-Omega
44
3185
BIOPLAST®
83
1023
JM-Clasp
20
2460
ORTHOFIT®-Omega
44
3187
BIOPLAST®
83
1026
T-Clasp
19
2461
ORTHOFIT®-Omega
44
3188
BIOPLAST®
83
1027
T-Clasp
19
2462
ORTHOFIT®-Omega
44
3189
89
1029
TK-Clasp
19
2470
Activator Tubes
47
3190
BIOPLAST® bleach
83
1030
TK-Clasp
19
2471
Activator Tubes
47
3194
HARDCAST®
85
1038
Jaw Fracture Splint
21
2472
Activator Tubes
47
3195
HARDCAST®
85
1039
PROFI-Bar
21
2484
VECTOR® 30
32/62
3200
HARDCAST®
85
1040
PROFI-Bar
21
2486
VECTOR® 40
32/61
3202
Spacer Foil
88
1047
J-Clasp
20
2489
VECTOR® 50
32
3203
Coating Foil
90
1048
J-Clasp oblique
20
2490
VECTOR® 80
33
3206
SKIN Packaging
90
1049
Jaw Fracture Splint
21
2491
VECTOR® 90
33
3207
ISOFOLAN®
88
1051
Lingual Bar
21
2492
VECTOR® 100
33
3209
BRUX CHECKER®
83
1052
Lingual Bar
21
2494
VECTOR® 140
33
3211
Silicone Tube
31
1053
Lingual Bar
21
2496
VECTOR® 160
33
3214
Cutting Bur
96
2497
VECTOR® 190
34
3216
94
2
®
2040
CARAT® Crampon Pliers
52
2498
VECTOR® 200
34
3218
BIOCRYL®-RESIN Monomer
90
2041
CARAT® Flat Pliers
52
2509
VECTOR® 350
34
3220
Blocking-out Putty
89
2042
52
2510
VECTOR® 400
35
3221
BIOCRYL®-RESIN Polymer
90
2043
CARAT® Angle Pliers
53
2512
VECTOR® 420
35
3222
95
2044
CARAT® Aderer Pliers large
53
2513
VECTOR® 440 R
35
3226
BIOPERM Trimmer
41/97
2046
53
2514
VECTOR® 440
35
3228
BIOCRYL® M
78
2048
SCHEU-Anchor
20 / 24
2516
VECTOR® 460
36
3229
BIOCRYL® M
78
2049
SCHEU-Anchor
20 / 24
2520
VECTOR® 500
36
3230
BIOCRYL® M
78
2050
SCHEU-Anchor
20 / 24
2522
VECTOR® 520
36
3231
BIOCRYL® M
78
2051
SCHEU-Anchor
20 / 24
2524
VECTOR® 600
36
3232
BIOCRYL® M
78
2052
SCHEU-Anchor
20 / 24
2526
VECTOR® 620
36
3233
BIOCRYL® M
78
2053
SCHEU-Anchor
20 / 24
2530
VECTOR® 720
37
3236
CETRON® Cleansing Set
50
2055
Arrow Clasp
24
2532
VECTOR® 730
37
3237
CETRON® Cleansing Powder
50
2056
Arrow Clasp
24
2533
VECTOR® 800
38
3238
CETRON® Care Spray
50
2100
Security expansion key
39
2534
VECTOR® 820
38
3242
84
2101
39
2536
VECTOR® 900
38
3246
OSAMU-Bond
92
2104
Adams-Clasp
24
2540
VECTOR® 740
37
3247
OSAMU-Polisher
97
2105
Adams-Clasp
24
2542
VECTOR® 750
38
3256
DURASPLINT® LC Kit
91
2106
Adams-Clasp
24
3
3257
DURASPLINT® Kit
90
2107
Adams-Clasp
24
3001
BIOSTAR®
103
3258
DURASPLINT® Polymer
90
2108
Adams-Clasp
24
3006
Pellet Cover
95
3259
DURASPLINT® Monomer
90
2109
Adams-Clasp
24
3007
Pellet Cover
95
3261
DURASPLINT® LC
91
2118
25
3011
BIOSTAR®
103
3263
LC-Primer
91
2119
Face-Bow
46
3021
BIOSTAR®
103
3265
LC-Bur C
93
2130
39
3136
Pellet Brush
95
3266
LC-Insulation
92
2288
Triangle Clasp
24
3137
Sampler of pressure moulding material
104
3267
LC-Bur A
93
2322
Triangle Clasp
24
3138
TWINSTAR P®
105
3268
LC-Bur B
93
2329
Frontal Guiding Bar acc. to R. Hinz
25
3139
TWINSTAR V®
105
3270
BIOPLAST®
83
2330
Frontal Guiding Bar acc. to R. Hinz
25
3140
TWINSTAR P®
105
3271
BIOPLAST® COLOR
82
2331
Positioning support
25
3141
TWINSTAR P®
105
3274
IMPRELON®
84
2332
Angle Tester acc. to Adamik
25 / 38
3142
TWINSTAR V®
105
3283
81
2334
Face-Bow
46
3143
TWINSTAR V®
105
3284
81
2335
Face-Bow
46
3145
BIOCRYL® C
78
3285
81
2336
Face-Bow
46
3147
BIOCRYL® C
78
3286
BIOPLAST® XTREME
81
110
REF
Product
Page
REF
Product
Page
REF
Product
Page
3287
BIOPLAST XTREME
81
3400
BIOPLAST MULTICOLOR-Set
82
5276
BLUE-BLOKKER
3288
BIOPLAST® XTREME
81
3403
COPYPLAST® C
85
5277
BLUE-BLOKKER® cannula micro
42/88
3289
BIOPLAST® XTREME
81
3405
CA® Foil soft
60
5278
BLUE-BLOKKER® cannula mini
42/88
3292
81
3406
CA® Foil medium
60
5281
CA® TIP 1
63
3293
81
3407
CA® Foil hard
60
5282
66
3294
81
3409
DURAN®
78
5283
CA® splint bags
66
3295
BIOPLAST® XTREME
81
3411
DURAN®
78
5288
42
3296
BIOPLAST® XTREME
81
3413
DURAN®
78
5290
65
3297
BIOPLAST® XTREME
81
3415
DURAN®
78
5291
CA® TIP 2
63
3298
BIOPLAST® XTREME
81
3417
DURAN®
78
5293
Set-Up Separating Disc
40
3312
BIOPLAST® XTREME DECO
82
3419
DURAN®
78
5295
CA® TIP 4
63
3313
82
3421
DURAN®
78
5298
CA® Book volume 1
66
3314
82
3422
DURAN® + A2 pd
79
5300
CA® Pipettes
65
3315
82
3423
DURAN® + A2 pd
79
5301
65
3316
82
3424
DURAN® + A2 pd
79
5302
CA® Cyano Veneer Fast
65
3317
82
3426
DURAN®+
79
5305
CA® Book volume 1
66
3320
IMPRELON® S pd
84
3428
DURAN®+
79
5306
CA® Book volume 1
66
3322
IMPRELON® S pd
84
3430
DURAN®+
79
5307
CA® Book volume 2
66
3324
IMPRELON® S pd
84
3432
DURAN®+
79
5308
CA® FLASH
65
3326
IMPRELON® S pd
84
3434
DURAN®+
79
5309
CA® Book volume 2
66
3328
IMPRELON® S pd
84
3436
DURAN®+
79
5310
CA® SMART
58
3330
IMPRELON® S pd
84
3438
CA® Retention foil pd
60
5313
Auxiliary Set (4.0) for CA® Photo Support
59
®
®
®
42/88
3337
DURASOFT® seal
80
3440
CA® Retention foil pd
60
5314
Fixing block for height adjustment of CA®
Photo Support
59
3338
DURASOFT® seal
80
3442
SIL-KITT
89
5315
CA® Photo Support
59
3339
DURASOFT® seal
80
3443
SIL-KITT
89
5316
CA® Gauge
67
3341
DURASOFT® pd
79
3444
Foam Discs
89
5317
CA® BOW CHROMIUM
62
3342
DURASOFT® pd
79
3445
BIOPLAST® COLOR
82
5318
CA® Book volume 2
66
3345
DURASOFT® pd
79
3447
MINISTAR S® protection cover
104
5319
66
3347
DURASOFT® blue pd
80
3448
BIOPLAST® COLOR
82
5330
CA® POWER GRIP
64
3348
DURASOFT® blue pd
80
3449
BIOSTAR® protection cover
103
5331
CA® POWER GRIP
64
3352
BIOPLAST® COLOR
82
3452
Heating support
102
5332
CA® POWER GRIP
64
3353
BIOPLAST® COLOR
82
3453
CA® Foil A2 soft pd
60
5333
CA® POWER GRIP
64
3354
BIOPLAST® COLOR
82
3454
CA® Foil A2 medium pd
60
5334
CA® POWER GRIP
64
3355
BIOPLAST® COLOR
82
3455
CA® Foil A2 hard pd
60
5335
CA® POWER GRIP
64
3356
BIOPLAST® COLOR
82
3460
SD-Foil Scissors A
94
5336
CA® POWER GRIP
64
3361
IMPRELON®
84
3461
SD-Foil Scissors B
95
5337
CA® POWER GRIP
64
3362
BIOPLAST® COLOR
82
3464
SD-Foil Lifter
94
5338
CA® POWER GRIP Set
64
3364
BIOPLAST® COLOR
82
3500
MINISTAR S®
104
5339
CA® POWER GRIP
64
3366
BIOPLAST® COLOR
82
3510
MINISTAR S®
104
5340
CA® POWER GRIP Holder
64
3369
HM Carbide Cutter
96
3520
MINISTAR S®
104
5341
ECHARRI PST Set
67
3370
HM Tricutter fine
96
3602
SD-Bond
86
5342
67
3371
POLYFIX on mandrel
41/97
3603
SD-Silicon
86
5343
67
3372
POLYFIX
41/97
3604
SD-Scalpell
86
5344
67
3374
BIOPLAST®
83
3605
SD-Cutter
87
5345
67
3376
DIMO®PRO SLIM
97
3606
87
5346
67
3377
Finishing Bur
96
3607
SD-Pincers
87
5347
67
3378
Finishing Set
96
3608
SD-Tray-Remover
87
5348
67
3380
DIMO® mandrel
97
3701
SD-Cyano Veneer Fast
72
5349
67
3381
DIMO®PRO
97
3703
SD-Pipettes
72
5350
67
3382
DIMO®
97
3705
SD-Composite Primer
92
5351
67
3383
DIMO®
97
3710
SD-Polishing Paste A
93
5352
67
3384
DIMO®
97
3711
SD-Polishing Paste B
93
5353
67
3387
DURASOFT® pd
79
3712
SD-Polishing Brush
93
5354
67
3388
DURASOFT® pd
79
3713
SD-Felt Wheel
93
5355
CA® Stripping Tool stainless steel holder
67
3390
BIOPLAST® MULTICOLOR
82
3714
93
5356
CA® Stripping Tool stainless steel holder
67
3391
82
5
5357
PST Set Standard
67
3392
82
5261
CLEAR-BLOKKER®
72/94
5360
CA® Model Holder for Photo Support
59
3393
82
5262
CA® Carbide Bur
60
5362
Parallelometer
101
3394
82
5263
CA® Grinding Set
60
5368
Set-Up Wax Bars
41
3395
82
5264
BLUE-BLOKKER® cannula micro
42/88
5371
Set-Up Model Trimmer
39
3396
82
5266
Set-Up Plaster
40
5372
Set-Up Saw
40
3397
82
5268
Set-Up Wax Sticks
41
5373
Saw blades
40
3398
82
5270
Model Holder
101
5374
Hinge Fixator
100
3399
82
5274
CA® CHECKER
58
5375
Mounting splints
100
111
Product Index
REF
Product
Page
REF
Product
Page
REF
Product
Page
5376
Peaked screws
100
8135
STEADY-RESIN
28
8364
30
5379
Saw blades
40
8136
STEADY-RESIN
28
8382
CHROMIUM coil wire
27
5380
Split-Fixator
100
8137
STEADY-RESIN
28
8383
CHROMIUM coil wire
27
5381
25 / 100
8138
Spray nozzles
31
8431
47
5435
Retainer boxes
49
8139
Spray nozzles
31
8432
48
5437
SD-Box red
66
8140
STEADY-RESIN
28
8433
48
5438
SD-Box green
66
8141
spray bottle
31
8434
48
5439
SD-Box blue
72
8142
Ortho Designs
31
8435
49
5448
Teleskope HF 5
70
8143
Ortho Designs
31
8450
Ortho-Bogenformer
53
5450
Teleskope HF 9
70
8144
Mica
29
8453
MENZANIUM® coil wire
26
5452
Teleskope HF 15
70
8145
Mica
29
8454
26
5455
Fixing elements for Herbst
43
8146
Mica
29
8455
26
5456
Fixing elements for Herbst
43
8147
Mica
29
8456
26
5457
Fixing elements
71
8148
Mica
29
8459
26
5458
Hexagon socket screw
71
8149
Nozzle for bottles
28
8460
26
5461
IST®-Kit HF 9
70
8150
Mica
29
8461
26
5462
GEORGE GAUGE™ bite fork
71
8151
Mica
29
8462
26
5466
O-rings
71
8152
Mica
29
8463
26
5468
Fixing elements
71
8293
CHROMIUM wire rods
27
8464
26
5469
Positioning Support
71
8294
CHROMIUM wire rods
27
8466
26
5470
Okklusiontrainer
73
8297
CHROMIUM wire rods
27
8467
MENZANIUM® wire rods
26
5471
GEORGE GAUGE™ Set
71
8299
CHROMIUM wire rods
27
8468
26
5472
71
8305
CHROMIUM wire rods
27
8469
26
5473
71
8306
CHROMIUM wire rods
27
8470
26
5478
HERBST hinges
43
8307
CHROMIUM wire rods
27
8471
26
5479
Hinge system acc. to Herbst
43
8308
CHROMIUM wire rods
27
8472
26
5480
Hinge system acc. to Herbst
43
8310
CHROMIUM wire rods
27
8473
26
5481
Distance Rings
43
8311
CHROMIUM wire rods
27
8478
26
5482
Distance Rings
43
8312
CHROMIUM wire rods
27
8480
26
5483
Distance Rings
43
8313
CHROMIUM wire rods
27
8482
26
5484
Distance Rings
43
8314
CHROMIUM wire rods
27
9
5485
Distance Rings
43
8316
CHROMIUM wire rods
27
9000
TAP® Standard Kit
74
5489
Fixing Elements for Hinge System
43
8322
CHROMIUM wire rods
27
9015
Cover plate
74
5490
Hinge system 44-kit
43
8323
CHROMIUM coil wire
27
9016
Mounting device
74
5494
OPM plastic bars
73
8324
CHROMIUM coil wire
27
9029
TAP®-T XL UK Lower guiding device
75
5495
OPM Kit
73
8325
CHROMIUM coil wire
27
9030
TAP®-T Set
74
5606
LC Mini Light
102
8326
CHROMIUM coil wire
27
9030.2
TAP®-T Set pre-assembled
74
5610
LC-6 Light Oven
102
8327
CHROMIUM coil wire
27
9031
TAP®-T Starter-Kit
75
5620
LC-6 Light Oven
102
8328
CHROMIUM coil wire
27
9035
Activation key
39
8329
CHROMIUM coil wire
27
9037
TAP®-T Matrix
75
72
6
6500
IMPRIMO® 90 Printer
106
8330
CHROMIUM coil wire
27
9038
SD-Metal Primer
6502
IMPRIMO® LC Model
106
8331
CHROMIUM coil wire
27
9039
Mounting device
74/75
6506
IMPRIMO® LC Impression
106
8332
CHROMIUM coil wire
27
9050
TAP®-T Reverse Kit
75
6503
IMPRIMO® Splint
106
8333
CHROMIUM coil wire
27
9050.2
TAP®-T Reverse Kit pre-assembled
75
6504
IMPRIMO® Tray
106
8334
CHROMIUM coil wire
27
9070
myTAP™
73
6510
3D Model Insulation
30
8335
CHROMIUM coil wire
27
9082
TAP® Splint case for patients
74
8336
CHROMIUM coil wire
27
7
7243
RESIMIX®
30
8338
CHROMIUM coil wire
27
7244
RESIMIX®
30
8339
CHROMIUM coil wire
27
7284
RESIMIX®
30
8350
STEADY-RESIN
29
8351
STEADY-RESIN
29
8
8010
Quad Helix
51
8352
STEADY-RESIN
29
8011
Quad Helix
51
8353
STEADY-RESIN
29
8020
Quad Helix
51
8354
STEADY-RESIN
29
8021
Quad Helix
51
8355
STEADY-RESIN
29
8030
Quad Helix
51
8356
STEADY-RESIN
29
8031
Quad Helix
51
8357
STEADY-RESIN
29
8080
51
8358
STEADY-RESIN
29
8081
51
8359
STEADY-RESIN
29
8130
STEADY-RESIN
29
8360
STEADY-RESIN
29
8131
STEADY-RESIN
29
8361
STEADY-RESIN
29
8134
STEADY-RESIN
28
8363
FORMO-PLAN
47
112
Notes
113
Welcome to SCHEU-DENTAL
SCHEU-DENTAL GmbH
Am Burgberg 20
58642 Iserlohn
Germany
A 46
Exit 46
Iserlohn–Oestrich
Direction Hemer
Brinkhofstraße
Direction Hagen
B 236
Brinkhofstraße
Motorway A45, at Hagener Kreuz
A46 Direction Iserlohn
Schleddestraße
Am Burgberg
Exit 46
Iserlohn – Oestrich
Please turn left after 200 m
Direction Oestrich
Direction Iserlohn
B 236
Please turn right at the roundabout
Gewerbegebiet Burgberg
Please turn right after 600 m
Schleddestraße
Please turn right immediately again
Am Burgberg
Direction Altena
ALL GOOD THINGS
COME IN THREES.
CA DIGITAL_YOUR PARTNER FOR DIGITAL ORTHODONTIC TREATMENT
CA DIGITAL’s CA® CleAr Aligner is simply three times as good:
3 innovative material thickness grades for up to 1 mm tooth movement per step, 3 steps per impression for
more precise results – all of this online in just 3 clicks. Thanks to innovative software solutions, integrated
workflows and advanced treatment options, CA DIGITAL is the right partner for all practices that intend
taking the path to digitization. CA DIGITAL – your digital future is just a click away: www.ca-digit.com
GB 3.000/05/16 Z REF 0100.02
More information:
SCHEU-DENTAL GmbH Phone +49 2374 92 88-0
www.scheu-dental.com Fax +49 2374 92 88-90
Am Burgberg 20
58642 Iserlohn · Deutschland

You can flip through our online catalogue - Scheu

Transcription

Similar documents

Ceiling Medallions - Trim-Tex

christmas brochure

portable usb dj mixer + scratch controll er + dj software

cervical spoon spray for citology fixation and slides hysterometer

Intarsia Workshops Intarsia Kits Beginner Patterns

BMW 4cyl M44-42 ITB KIT assembly instructions

11755-pcs Newspaper - Overseas Workers Welfare Administration

Full Bio

SMARTWebMove makes PCS moves easier

verdiem rbo printlogistix - St. Louis Green Business Challenge