- Bluewater Manufacturing Inc.

Passive Fall Protection…
It’s all we do.
A Safety Products Group Company
The World’s Most
Versatile Passive
Guardrail Systems
SafetyRail
2000
Portable. Non-Penetrating. Easy to install.
No drilling. No holes. No Kidding.
Bluewater Mfg., Inc. specializes
in non-penetrating, passive fall protection
products for workplace safety. Our versatile
line of guardrail systems fits a variety of
applications and meets OSHA guidelines for
permanent guardrail without penetrating
your roof. That’s because no drilling is
needed for installation. In addition, it can
be used as a portable system to be moved
from one area to another; for example, a
great feature for water treatment plants.
Our optional Rail Transport Cart stores
multiple sections of railing and bases and
can easily be moved from one location to
another.
RTC 2000 Cart
2
How does the SafetyRail 2000 System
comply with OSHA regulations? It all boils
down to physics. When the 108 lb. bases
are installed in a run with a 90˚return on
each end, the combined mass and the
geometry of the installation creates a
compliant barrier for roof edge protection.
Unlike most guardrail systems currently on
the market, SafetyRail 2000 only requires
a 90˚return at the beginning and end of
the run, whether it’s 5’ or 1,000’ plus. This
unique design allows us to eliminate the
cost and danger of potential trip hazards
created by intermediate counterweights
used in other guardrail systems.
Easy Installation.
No drilling. No tools needed.
Installation is easy, so there’s no need to
incur the expense of hiring a contractor to
install SafetyRail 2000. Two workers can
erect over 500 feet of railing in less than
two hours without drilling holes into your
roof. No other guardrail system can
make this claim. Plus, all railings come
with simple installation instructions.
500023 EZ Mover
We make it
easy for
you to
protect your employees
and contractors.
w
w
w
w
w
w
w
w
Our four port base allows infinite positioning
of the rail sections
Positive locking system secures rails to base
Complies with OSHA regulations 29 CFR
1910.23 and 1926.502
Toe board adapters available
No intermediate counter weights required,
reducing trip hazards
Bases come standard with EPDM pads on
bottom
Optional EPDM or BUR pads are available
Working handles are cast into base for easy
lifting and positioning
Installation in 3 easy steps
1. Position
bases into
desired
location
using the
EZ mover.
2. Insert each rail into
3. Insert
base ports.
securing pin
and lock into
place.
That’s all
there is to it!
IMPORTANT: Our positive locking system allows for quick visual verification that the
rails are locked into place. Friction lock systems DO NOT provide this verification.
Our easy-to-use
system complies with
OSHA’s requirement
for using toe boards on
some elevated work areas.
Each bracket slides on the rail
and fits easily over a toe board. For added strength
it tightens to the rail with a friction knob.
Our brackets are designed to mount on any
toe board, no matter how the base is
positioned.
Each 3’, 3-1/2’, 4’, 5’, 7-1/2’ and 10’ rail sections are constructed
of 1-5/8 inch steel tubing. When rails are secured to the base,
the height of the top rail measures 42” from the working
surface. Bright yellow safety Powder Coat finish is standard.
Every rail section is equipped with a tube containing
instructions on proper utilization of the
SafetyRail 2000 system.
Our base is the most versatile product in
the marketplace. It measures 21-1/4”
across, from outside of handle to
outside of handle. The 108 pound
cast iron base has four ports,
allowing the rails to be placed in
an infinite number of positions to
avoid roof obstacles such as drains or
duct work. Each port has slots that incorporate
the custom engineered positive locking system. The base
center features a lifting hook for use with the EZ Mover,
as well as handles for easy lifting and positioning. Should
you need to permanently mount the base, four holes are
available for anchor bolts.
The minimum toe board size is a 2” x 4”
piece of lumber. Check OSHA CFR 29 1910.23
and 1926.502 for these and other regulations.
One guardrail system.
Many uses.
Outriggers (Returns): Whether your
installation is 5’ or 1000’ in length, you
must have outriggers at the beginning
and end of the run (A). They should be
placed approximately 90 degrees to
the danger side (B).
w
Manhole barricade
w
Mezzanines
w
Rail car platforms
w
Assembly and break areas
w
Ramps
w
Crowd control
w
Construction sites
w
Hoist areas
w
Dig Sites
w
And more!
B
A
A
Our gate system features a
uniquely strong single-pull, double
latching mechanism that meets
OSHA regulations. When secured
with the locking coupler, the hinge
post always holds the hinges
parallel to the latch post. Gates are
conveniently sized to match the
rail lengths.
Each base has cast-in reliefs for easy stacking and storage.
Each port has a drain hole and rubber pads come standard
on the underside to protect the roof surface. When placing
the base on a slippery or wet surface we recommend
using the optional rubber pads for added stability.
* SafetyRail 2000 has been tested by a licensed engineering firm and was documented to comply with all OSHA regulations
pertaining to guardrail (29 CFR 1910.23 and 1926.502). Test results are available upon request.
3
www.bluewater-mfg.com
CAD
Services
Our innovative staff can provide creative solutions to
help solve your safety issues..
Complete CAD capabilities
BlueWater Mfg’s CAD services range from
2D to 3D modeling. 2D (Plan View) drawings
provide documentation for installations as well
as ensuring accuracy of the Bill of Materials
for your project. In addition, we can provide
3D models to assist you or the end user in
visualizing the project. BlueWater Mfg. is
committed to making your project as seamless
as possible.
Concept
4 A company of innovation – not imitation.
Completion
ParaRail
Guardrail System
Easy and full access to edges of fall hazards
that complies with OSHA regulations.
BlueWater Mfg. invented the ParaRail to allow workers complete access to a leading edge
while still being protected by the guardrail. It provides fall protection for a variety of tasks
including maintenance for security cameras, antennas, lights, drain cleaning and hoisting
of tools and materials. The ParaRail System complies with OSHA regulations for guardrail
29 CFR 1910.23 and 1923.502.
The ParaRail provides the portability and economy of a self-supporting, no drill
installation. Just like the SafetyRail 2000, the ParaRail can be erected in minutes. Bases
can be easily transported utilizing the EZ Mover and optional EPDM rubber pads and BUR
pads are available for added protection of roof surface.
The system can be used as a permanent guardrail or moved to
different locations as needed. The ParaRail provides the economies
of a fully portable system for commercial, industrial and worksite
applications such as office buildings, airports, high-rises, parking
decks, raised docks, shopping centers, mezzanines, and bridges.
Each ParaRail is custom manufactured in-house for quick shipment;
all we need are the dimensions shown in the diagram to the right.
Simply provide these dimensions to us with the desired length and
we will manufacture it for you in less than two weeks. Powder Coat
and Galvanized finishes are available.
5
www.bluewater-mfg.com
Roof Hatch Floor Door
& Skylight Guardrail Systems
Protect your employees, and your investment while complying
with OSHA regulations. It’s that simple.
OSHA requires guardrail protection on the exposed sides of openings of roofs and floors in
most situations. Bluewater Manufacturing’s SafetyRail 2000 Guardrail System is designed
to meet this safety concern. In fact, our roof Hatch/Skylight Systems exceed OSHA Std. 29
CFR 1910.23. The Roof Hatch/Skylight System is installed in minutes and easily dismantled
for roof repair.
Safety and Ease
For roof hatch, skylight, fire vent and floor
door protection
w
w
Skylight System protection
A company of innovation – not imitation.
6
www.bluewater-mfg.com
Independently tested to comply with OSHA
fall protection regulations for guardrails
w
Installs in minutes
w
Easily dismantled for roof repair
w
w
Roof Hatch
System shown with
Grab Bars
Non—penetrating
Designed to erect in numerous configurations
(L-shapes, straight runs, and more)
1-5/8” diameter rails come with a quality
Powder Coat finish or Hot Dipped Galvanized
finish
SafetyRail 2000
Guardrail Systems
require no drilling
– keep your roof
warranty intact
Hatch
Defender
A non-penetrating safety solution
specifically designed for rooftop hatches.
The Hatch Defender’s unique compression attachment
system sets up in minutes and works without drilling into
and compromising the curb of the hatch or your roofing
membrane. Units can be easily dismantled for roof deck repair.
Made of 1-1/4” sq. tubing and has a hot-dipped galvanized
finish. Custom colors are available. The GuardDog Safety Gate
comes standard with every kit.
w
Assembles in minutes
w
Grab Bars come standard for easy egress and ingress
w
Both the length and width are adjustable to fit non-standard size hatches
7
www.bluewater-mfg.com
Ladder
Defender
A passive fall safety solution for permanent rooftop access ladders.
The Ladder Defender is an OSHA compliant and cost effective controlled access and passive
fall safety solution for permanent rooftop access ladders. Our unique non-penetrating design
ensures safe and easy egress/ingress to and from the rooftop. Our proprietary connector
brackets attach to three different styles of the ladder frame to ensure that installation
is always quick and effective. Custom colors are available to compliment your building’s
exterior color scheme. The GuardDog Gate is available as an option.
8
www.bluewater-mfg.com
w
w
w
Assembles in minutes
Adjustable front bar that makes the alignment
of the rail to the frame a SNAP
Available connector options include: Rail-to-Rail,
Rail-to-Flat, Rail-to-Angle
w
Custom colors available
w
Finishing rails are standard
Architectural
Series
For applications where appearance is important.
SafetyRail 2000 Architectural
Series is perfect for new
building construction, adding
passive fall protection to an
existing building, or as an
addition to existing guardrails.
Why choose the
Architectural Series
*Pictured with ParaRail.
When you are looking for a safe, more aesthetically
appealing fall protection system, the SafetyRail 2000
Architectural Series is the perfect choice. It combines our
non-penetrating guardrail system with architectural appeal
for applications where railing appearance is important. The
system has a pleasing sightline and can enhance the appearance of
a building while maintaining the utmost in fall protection. Like the
SafetyRail 2000 System, the Architectural Series requires
no penetration to the roof surface when installed and
complies with OSHA (Standards — 29 (FR) 1910.23 and
1926.502.
w
More pleasing sightlines
w
No drilling necessary to install
w
Optional
Incline
Stanchion
w
w
w
Complies with OSHA Regulations for fall
protection
No intermediate counterweights required
Custom engineering/manufacturing
available for special applications
Curved, incline and straight stanchions are
also available
9
www.bluewater-mfg.com
StealthRail
Guardrail
System
A collapsible, non-penetrating guardrail system
Patent Pending
that provides clean sightlines.
Installation
in 3 easy steps
The StealthRail Guardrail System provides clean site lines and preserves the architectural
integrity of your building, while offering perimeter protection. Each section is collapsible
and the one-way pivot assembly allows the rails to fold down after rooftop work has
been completed. A detent pin attaches to each pivot assembly, locking the rails in the
upright position. Like the SafetyRail 2000 System, the StealthRail requires no penetration
to the roof surface when installed and complies with OSHA (Standards – 29 CFR) 1910.23
and 1926.502.
The StealthRail is the ideal solution if you want a complete absence of railing on your
rooftop and the ultimate in passive fall protection.
Protect your assets while preserving architectural integrity
w
w
w
w
w
Reduce costs over an engineered lifetime system
Folds out of sight when not
in use
No drilling required to install
Rails can be mounted in
infinite positions
Use around mechanicals or
for perimeter protection
10
A company of innovation – not imitation.
www.bluewater-mfg.com
SG
Guardrail
System
The most versatile guardrail system designed for standing seam roofs
There is no other product on the market like the SG Guardrail System. It features
a base plate that “grabs” the seams on your metal roof and complies with OSHA
regulations for guardrails. With 3 different styles of stanchions, the galvanized base
plate is designed to fit various types of standing roof seams and can be used with
our Architectural Series Railings, the SafetyRaill 2000, StealthRail and Perma-Line
Warning Line Systems.
The SG Guardrail System is ideal for protecting workers at mechanicals, ladder areas
and roof hatches, or to create a full perimeter around the rooftop. A CAD layout for
simple installation is included with each order.
An innovative solution for standing roof seam roofs
w
Complies with OSHA regulations
w
w
Hot-dipped Galvanized finish
w
w
Use with Architectural Series Railings, the
SafetyRail 2000, StealthRail and Perma-Line
Warning Line Systems
Utilizes S-5! Clamps
CAD layouts included for
simple installation
11
www.bluewater-mfg.com
Perma-Line
A cost-effective, permanent visual warning line system
Patent Pending
for controlled access zones
The Perma-Line can greatly reduce the cost of an entire roof
installation by visually protecting the non-serviceable areas
of your roof and creating controlled access zones. With this
innovative system you will no longer need to make monthly
trips to your rooftop to replace worn and torn plastic
flagging. Once in place, the Perma-Line remains intact
until you want to move it. Best of all, it’s a non-penetrating
system, preserving the integrity of your roof.
The Perma-Line is not a motion stopping device. It is a highly
visible warning barrier that exceeds OSHA regulations for
warning line systems.
12
www.bluewater-mfg.com
Visit our website or call us for more details regarding
OSHA regulations and the use of warning line systems.
Safety Rail 2000FG
Fiberglass guardrail system where metal railing can’t be used.
The non-penetrating
guardrail system that won’t
interfere with RF signals
The SafetyRail 200FG is constructed out
of fiberglass, making it the ideal rooftop
passive fall protection system when
telecommunication equipment is present
and metal guardrails would interfere with RF
signals. This RF-transparent guardrail is nonpenetrating and can be used as a portable or
permanent fall protection system.
Like the SafetyRail 2000, the 2000FG utilizes the
four port base, allowing the rails to be placed
in an infinite number of positions to avoid
roof obstacles such as drains or duct work.
The railings are made from a polyester,
fire retardant, UV inhibited and UV coated
material. Installation is fast and easy,
requiring no tool or drilling.
w
Perfect for applications where metal railings
can’t be used
w
No drilling necessary to install
w
Meets and exceeds OSHA regulations for fall
protection
w
100% portable
w
Rails can be positioned in infinite positions
w
Each base supports up to four rails
w
Custom engineering and manufacturing for
special requirements
13
www.bluewater-mfg.com
Kwik-Rail
The economic modular railing system.
Inquire about our full range of
structural pipe fittings.
The Kwik-Rail can be used for a variety of applications including machine guarding, traffic
and crowd control, elevated docks or pits, stairway endings, mezzanines and more.
This cost-effective railing creates a tough and durable barrier in minutes with no welding.
Assembly is easy. The system can be mounted with standard anchor bolts and the only
tool you need is a hex key. The Kwik-Rail comes in kit form and can be utilized with our
self-closing GuardDog Safety Gate.
500136.40 6’ Rail Only
500137.40 12’ Straight Run
The cross members come standard in 6’ lengths, but can be cut to size to fit your specific
needs. The railing is 42” tall.
System benefits
Available options
w
Complies with OSHA and BOCA Standards
w
Various colors
w
Lower cost per foot
w
Galvanized or aluminum pipe
w
Tough powder coated pipe in safety yellow
w
1-1/4” pipe (1.66” OD)
w
Easily assembled with a hex key
w
Mounts with standard anchor bolts
w
1-1/2” pipe (1.90” OD)
14
www.bluewater-mfg.com
Many applications
500138.40 6’x6’ Corner Section
500139.40 6’ Extension
w
Machine guarding
500140.40 6’- 90˚ Extension (not shown)
w
Traffic and crowd control
w
Elevated docks or pits
Note: For 1-1/4” pipe option,
replace the .40 with a .32
w
Stairway endings
Versa-Clamp
The portable fall protection system.
Gate hoop
compression clamp
ensures quick
set-up and makes
adjustments a
“snap.”
The Versa-Clamp is a portable product that can be set up on parapets and concrete slabs.
It can be used from job site to job site, offering passive fall protection that meets OSHA
regulations. It’s unique compression locking system makes it easy and fast to install.
Simply place the clamp over a parapet or on a concrete slab and slide the compression
plate against the surface. Turn the compression rod against the plate and you are done! The
compression plates are offset so they won’t damage copings or flashings on the parapets.
Versa-Clamp Features
w
w
w
w
Versa-Clamp expands from 2” to 17”
Compression plates are offset to protect
copings and flashings
Adjustable guardrail post comply with OSHA
guardrail heights from the work surface
Functions as a slab grabber too.
w
w
w
Use on parapets or decking applications
w
Toe board brackets available for deck
applications
w
Adaptors for rail sections available for deck
applications
Tough safety yellow powder coat finish is
standard
Custom manufacturing available to meet
your special requirements
Install in 8 foot increments
Para-Clamp
The portable, cost-effective
solution for use on parapets.
The Para-Clamp is a re-engineered Versa-Clamp to be used specifically on parapets
to provide fall protection at a reduced cost.
Rail Adapter
Since it uses the same compression locking mechanism as the Versa-Clamp, the system
is easy to install and won’t damage copings or flashings.
Para-Clamp can be purchased in two sizes that expand to fit up to either 18” or
24” wide parapets. If you already own a 18” Para-Clamp, we can supply you with a
25” axle bar to accommodate larger parapets.
Para-Clamp Features
w
w
w
Easy to use compression locking system
won’t damage copings or flashings
Adjustable guardrail post comply with OSHA
regulations
Para-Clamp has two size options to accommodate parapets up to 18” or 25” in width
w
Install in 8 foot increments
w
Adaptors available for deck rail sections
w
Tough yellow zinc plating finish is standard
w
Custom manufacturing available to meet
your special requirements
15
www.bluewater-mfg.com
The GuardDog Self-closing Safety Gate.
Tough,
durable
and easy
to install.
Gate Hoop Compression Clamp
ensures quick set-up and makes
adjustments a ‘snap.’
Options to suit
your situation
w
w
w
w
w
The GuardDog Safety Gate is designed to match top and
mid-rail heights of OSHA compliant guardrails. When the
gate is installed with the top rail at OSHA’s mandated
guardrail height of 42” above the work surface, the bottom
Our new Self Stopping GuardDog
Safety Gate installs and adjusts easily
rail of the gate is at OSHA’s nominal mid-rail height of 21”.
The GuardDog can be installed in just 5 minutes. It comes
fully assembled and includes securing hardware for pipe/
tubing installation. All you will need is a 1/2” wrench.
without the need for a gate stop. This
positive stopping mechanism is perfect
for mezzanines and other areas which
do not have adjoining structure.
Gate arm provides maximum
opening coverage and the
rails are spaced to meet OSHA
guardrail regulations
Universal Hinge Assembly fits
various railing types up to 2”
O.D. or flat surface mounting.
Adapter kits are available for
larger or uniquely shaped
railings
Each gate is capable of swinging
in either direction
The self-closing feature employs
two stainless steel torsion
springs
Five nominal sizes are available,
and each is adjustable laterally
up to 6”
Self stopping
action adjusts in
seconds
The gates come in five nominal sizes ranging from 18”
to 48”. Each gate size can be laterally adjusted up to 6”
(-3” to +3”) to ensure proper fitting in the opening. Toe
board adaptor kits are available for all sizes.
Custom gate for shipyard
The GuardDog Safety Gate comes in three finishes:
Powder Coat Safety Yellow, Hot-Dip Galvanized or 316 Stainless Steel. Special colors are
available upon request. (Minimum paint charges may apply).
16
www.bluewater-mfg.com
Kwik-Stand
A portable visual warning/barrier system.
The portable Kwik-Stand is the industry standard for temporary visual warning line systems and
the choice for discriminating roofers looking for a blend of portability, durability and ease of use.
This hand-carried warning line system can be used on metal roofs, and gravel or asphalt
surfaces. The unique spindle mount system is rigid when in use, and the handles make it
easy to hoist and transport. The Kwik-Stand comes standard with a tough powder coat finish.
The Kwik-Stand has holes at each end of the support for use on:
Effective. Portable.
Easy to use.
w
w
Complies with OSHA regulations
(Std – 29 CFR) 1926.502 (f)
w
Tough powder coat finishes available
w
Each stand weighs 34 lbs
w
Metal roofs – Insert the optional extender feet to fit between ribs of the roof.
w
Gravel or asphalt – Use stakes to make the stand more secure.
Self-contained design with “no lose” lanyard
clip pin assembly
Provides a high-visibility warning to reduce
accidents using bright yellow OSHA-rated flags
Fast to set-up and take down
A myriad of uses
Extender feet.
Shown in use and folded
(ready for transportation).
In powder-coated finish.
w
Rooftops
w
Construction sites/High-rise construction
w
Manufacturing facilities
w
Maintenance contractors
w
Office buildings
w
Amusement parks
w
Airports
w
Warehouses
Easy flag tie-off system.
Kwik-Kart
Highly maneuverable,
highly mobile.
Quickly secure temporary or unpredicted hazards
and protect employees and visitors. With
Kwik-Kart, establishing safe distances couldn’t
be easier. Kwik-Kart’s highly maneuverable,
highly mobile design enables you to act fast,
setting up and securing an area in minutes.
Easy to use and affordable. Kwik-Kart’s sturdy
construction ensures that this is an investment
you can use again and again and again.
w
Holds 9 Stanchions (3 Kwik-Stand Kits)
w
Care Free Tires are standard
17
www.bluewater-mfg.com
™
Swing
Alert
The only Crane Swing
Warning System on the
market.
Our new Swing Alert system meets OSHA
compliance for construction, industry, shipyards,
and any other application where cranes are
used. All these industries require swing radius
protection for all cranes as well as other pieces
of equipment that have potential pinch points.
Easy to install.
Economical. Effective.
The Swing Alert is lightweight and easily
installed by a single person without the use
of tools. Plus, it accommodates all types and
makes of equipment.
Why not comply
when it’s so easy?
w
w
w
Moves with the equipment
w
Effective and economical
w
Fits on all types and makes
Complies with OSHA regulations
Fast and easy to install – no tools needed
18
www.bluewater-mfg.com
of equipment
Custom and Specialty
Applications
Creative Solutions for your Unique Needs
1.
1. Tall Rail Section Mounted to Wall
2. Chiller Unit Fall Protection
3. Stealth Rails with Sliding Gates for Church
4. Step Rail
5. Elevated/Fixed System for Bus Maintenance
6. Adjustable Mid-Rail
7. Custom ParaRail for Scupper Drain Cleaning
2.
3.
5.
4.
6.
7.
19
www.bluewater-mfg.com
A Safety Products Group Company
4064 Peavey Road
Chaska, MN 55318
Tel 952-448-2935 • 866-933-2935
Fax 952-448-3685
www.bluewater-mfg.com
Email info@bluewater-mfg.com