Atlas Copco Screwdrivers
Transcription
Atlas Copco Screwdrivers
Atlas Copco Screwdrivers Securing productivity from 0.005 Nm 0.005 Nm 0.010 Nm 0.1 Nm 0.5 Nm 1 Nm 5 Nm 12 Nm 2 AT L A S C O P C O S C R E W D R I V E R S Contents Introducing five levels of functionality Level 1. Torque control n LUM pneumatic screwdriver n EBL Standard electric brushless screwdriver n BCP Battery clutch screwdriver 4–5 6–9 Level 2. Batch count + Torque control n EBL Advanced electric brushless screwdriver 10 – 13 Level 3. Joint control + Batch count + Torque control n Tensor DL electric screwdriver n MicroTorque TM electric screwdriver 14 – 17 Level 4. Critical fastening + Joint control + Batch count + Torque control n Tensor SL electric screwdriver n MicroTorqueTM electric screwdriver Level 5. Zero fault fastening n ToolsNet PF n ToolsTalk MT Net 18 – 21 22 – 23 Technical data, ordering numbers and accessories 24 – 37 Screwdriver bits 38 – 42 Vibration and noise emission values 43 AT L A S C O P C O S C R E W D R I V E R S 3 Five levels of functionality For every low-torque assembly need, the Atlas Copco screwdriver range range has a solution – from ultra-low torque timepiece assembly to industrial scale electronics production. The range features innovative technology and advanced control capabilities, combined with unrivalled ergonomics. Level 5: Zero fault fastening You need zero fault fastening plus level 4 functionality. Level 4: Critical fastening Level 3: Joint control You need fastening that ensures joint integrity, plus level 2 functionality. Levels You need critical fastening plus level 3 functionality. Level 2: Batch count You need to know that every screw has been fastened, plus level 1 functionality. Level 1: Torque control You need precision fastening, cycle after cycle. Torque must be accurate and consistent. 4 AT L A S C O P C O S C R E W D R I V E R S LEVEL 1 LEVEL LEVEL LEVEL LEVEL 5 4 3 2 Functionality AT L A S C O P C O S C R E W D R I V E R S 5 The EBL electric screwdriver is in line with Atlas Copco’s reputation. With this tool I get a significant process improvement, thanks to the improved quality of the fastening. This is a result of the b etter torque accuracy and consistency. The EBL will also increase productivity because it is light, very easy to handle and more comfortable to use. Mr Jesus Reyes, Project Engineer, Valeo Mexico. 6 AT L A S C O P C O S C R E W D R I V E R S LEVEL 1 – TORQUE control Functionality level 1 g Torque control For industrial assembly operations, accurate fastening and productivity go hand-in-hand. The application of accurate and consistent torque on high-volume production applications is crucial to efficient assembly. Accurate and consistent torque control reduces customer warranty claims and production costs, improves productivity and minimizes production line downtime. Problem:Repetitive stress injuries and fatigue. Solution:Screwdrivers with fast clutch release, ergonomic design and soft, warm grips for optimum operator comfort. Problem:Damage to plastic threads and delicate components. Solution: The Atlas Copco soft-stop feature reduces the shock levels transmitted to delicate joints during the tightening cycle. Problem:High running costs for tools. Solution:Tools designed to last for many years with low service and maintenance costs. Problem:High noise levels in the working environment. Solution: EBL screwdriver – quiet operation thanks to brushless motor. AT L A S C O P C O S C R E W D R I V E R S 7 Assembly needs: You need precision fastening, cycle after cycle. Torque must be accurate and consistent. Atlas Copco screwdriver solutions: LUM, LTV, EBL and BCP. LUM/LTV pneumatic screwdrivers EBL standard electric brushless screwdrivers BCP battery clutch screwdrivers • From 0.025 to 15.5 Nm • From 0.05 to 4.5 Nm • From 0.8 to 12 Nm • Rapid shut-off • Rapid shut-off • Ergonomic pistol-grip design • Low reaction impulse • Brushless motor – longer lifespan • Low noise level • Low noise level •7 brushless models offering variable speed with a speed setting unit • Operator comfort • Unique non-tamper torque setting •Choice of two 18 V Li-Ion batteries: • Lubrication-free • Lever start or push start 1.3 Ah Flat Pack or 2.6 Ah Big Pack • Soft stop options • Vacuum pick-up accessories •Light in front to illuminate work piece •Vacuum pick up accessories for LUM 02 • Soft stop versions • Torque OK/NOK light with optional buzzer • ESD and UL approved • ESD approved For technical data, see pages 28 – 29 For technical data, see pages 24 – 27 •Battery can be mounted in two directions •Low noise level For technical data, see pages 30 ESD certification guarantees against damage of electronic components by an uncontrolled electrostatic discharge (ESD) from the tools. In practice it certifies that at no point will the material of the equipment hold an electrostatic potential above 100 V for more than 2 seconds. 8 AT L A S C O P C O S C R E W D R I V E R S LEVEL 1 – TORQUE control AT L A S C O P C O S C R E W D R I V E R S 9 EBL screwdrivers had the functionality we needed when we built our new LCD assembly lines. D urability, quiet operation and batch count capabilities – in combination with line control – made the screwdriver the ideal choice, making sure we never miss a screw. Mr Marek Blaha, LCD Production Division General Manager, Sony Slovakia. 10 AT L A S C O P C O S C R E W D R I V E R S LEVEL 2 – BATCH count Functionality level 2 g Batch count + Torque control Eliminate the problem of missing screws with batch count functionality. Complex fastening regimes with multiple screws and high-speed production can lead to missed screws and compromised quality. Get it right the first time round with batch count and line control functionality. Problem: On fast moving assembly lines, operators can miss screws. Solution: Screw counting capability with operator feedback signal. counting? Eliminate the problem straight out of the box with the Atlas Copco EBL advanced electric brushless screwdriver. Problem: Operator needs to paint every screw in order to check each one is fastened. Solution: Screw counting function and line control capability. When all the screws are in place, the screwdriver sends a signal to the line and next batch arrives. Does your production process require screw 1... ...2... ...3... ...4 Batch OK Screw counting AT L A S C O P C O S C R E W D R I V E R S 11 Assembly needs: You need precision fastening, cycle after cycle. Torque must be accurate and consistent. You also need batch count functionality. Atlas Copco screwdriver solution: EBL – advanced electric brushless screwdriver. EBL – advanced electric brushless screwdriver RE Drive • From 0.05 to 4.5 Nm • Batch count functionality • Rapid shut-off • Tightening cycle time programming • Brushless motor – longer lifespan • I/O digital signals for line control • Low noise levels • Unique non-tamper torque setting • Lever start or push start • Vacuum pick-up accessories • Soft stop versions • Reporting models • ESD and UL approved For technical data, see pages 28 – 29 ESD certification guarantees against damage of electronic components by an uncontrolled electrostatic discharge (ESD) from the tools. In practice it certifies that at no point will the material of the equipment hold an electrostatic potential above 100 V for more than 2 seconds. 12 AT L A S C O P C O S C R E W D R I V E R S LEVEL 2 – BATCH count AT L A S C O P C O S C R E W D R I V E R S 13 We need to identify that operators correctly install the screws in one of our critical products. The MicroTorque’s angle control functionality is amazingly precise and has helped us to reduce scrapped parts. Additionally, the robust design of the screwdriver makes it the most durable we have ever had. Mr Sam Zhao Equipment Maintenance Manager Schneider Electric, China. 14 AT L A S C O P C O S C R E W D R I V E R S LEVEL 3 – JOINT CONTROL Functionality level 3 g Joint control + Batch count + Torque control Complex assembly, requiring multiple torque settings within the same cycle sequence, can be time consuming to execute correctly. Do it automatically with level 3 functionality – torque settings change sequentially, eliminating operator errors – while process control detects cross-threaded joints and angle control eliminates assembly errors. Problem: Cross-threading of joints. Solution: Detection of cross-threading by controlling the torque level during the rundown stage of the tightening cycle. Problem: Wrong screw in the wrong place. Solution: By programming the angle according to the screw length the system detects if the screw is installed in the right place, and gives opera tor feedback. Problem: Several tools required for different types of joint. Solution: Use one tool that can be programmed to handle different torque settings. Problem: Stripped screw in sensitive plastics. Solution: Programmable speed in the second stage of thetightening. AT L A S C O P C O S C R E W D R I V E R S 15 Assembly needs: You need precision fastening, cycle after cycle. Torque must be a ccurate and consistent, batch count and securing the joint are also essential. Atlas Copco screwdriver solutions: Tensor DL and MicroTorque TM. Tensor DL electric screwdriver • From 0.3 to 12 Nm • Lever start or push start • Ergonomics design • Signal lights • Front lights • ESD approved MicroTorque ETD M-ABL Ergo electric screwdrivers MicroTorque ETD M 27 ABL electric screwdrivers • From 0.1 to 0.8 Nm • From 0.075 to 0.27 Nm • Lever start or push start • Prepared for vacuum pick-up • Prepared for vacuum pick-up • Angle encoder • Angle encoder For technical data, see pages 35 – 37 MicroTorque controller • One to eight tightening steps Tensor DL advanced controller • Up to 32 parameter sets • Up to 10 parameter sets • Line control • Tool service indicator • LED display • LED display • Configurable display • Line control • Compact controller • Autoset • Up to 10 tightening sequences For technical data, see page 32 For technical data, see pages 35 – 37 ESD certification guarantees against damage of electronic components by an uncontrolled electrostatic discharge (ESD) from the tools. In practice it certifies that at no point will the material of the equipment hold an electrostatic potential above 100 V for more than 2 seconds. 16 AT L A S C O P C O S C R E W D R I V E R S LEVEL 3 – JOINT CONTROL AT L A S C O P C O S C R E W D R I V E R S 17 In order to maintain our competitiveness and achieve better assembly quality, we installed four fixtured MicroTorque screwdrivers. Working as multiple spindles within one automated assembly station, we significantly increased productivity and by detecting common assembly problems, we now have documentable process control. Mr Luis Marques, Manufacturing Engineer, Visteon Portugal. 18 AT L A S C O P C O S C R E W D R I V E R S LEVEL 4 – CRITICAL FASTENING Functionality level 4 Critical fastening + Joint control + Batch count + Torque control g For the most demanding fastening scenarios, the Atlas Copco screwdriver range offers tools for performing safety and mission-critical assembly. Capable of handling multiple parameter sets sequentially, producing detailed information for tightening analysis and allowing full traceability, these transducerized tools represent state-of-the-art control and precision. Problem: Operator has to use a click wrench after tightening to check fastening is correct. Solution: Using a high-accuracy screwdriver eliminates the need to use a click wrench. Problem: The assembly of safety-critical components needs to be operator independant. Solution:Transducerized screwdrivers deliver the highest level of accuracy and allow comprehensive data collection. Problem: Assembling safety-critical or delicate plastic components requires the highest level of tightening accuracy. Solution: Choose an Atlas Copco transducerized screw- driver – the only type of screwdriver that can perform repeated fastening with industry leading accuracy. Problem: Need to increase cycle rate – automation. Solution: Use fixtured tools, controllers equipped with I/O bus and network integration. AT L A S C O P C O S C R E W D R I V E R S 19 Assembly needs: You need precision fastening, cycle after cycle. Torque must be a ccurate and consistent, batch count and securing the joint are also essential. In addition you need to ensure critical fastening. Atlas Copco screwdriver solutions: Tensor SL and MicroTorqueTM ETF MT. Tensor SL electric screwdriver MicroTorque ETF MT electric screwdriver • From 0.3 to 12 Nm • From 0.005 to 5 Nm • Lever start or push start • Fixtured screwdriver • Ergonomic design • Built-in angle encoder • Signal lights and buzzer • Longer durability • Front lights • ESD approved Tensor SL controller MicroTorque controller • One to eight tightening steps • Up to 16 parameter sets • Up to 250 parameter sets • Line control • Tightening status storage: 5000 • LED display • Up to 99 jobs • Configurable display • Cell programming • Compact controller •Logic configurator • Up to 10 tightening sequences •Graph model with color display For technical data, see page 35 – 37 For technical data, see page 33 – 34 ESD certification guarantees against damage of electronic components by an uncontrolled electrostatic discharge (ESD) from the tools. In practice it certifies that at no point will the material of the equipment hold an electrostatic potential above 100 V for more than 2 seconds. 20 AT L A S C O P C O S C R E W D R I V E R S LEVEL 4 – CRITICAL FASTENING AT L A S C O P C O S C R E W D R I V E R S 21 Visualization of the assembly sequence makes work much easier, prevents p roduction errors and improves product quality. We like using Atlas Copco electric screwdrivers. With Tensor tools we are always in full control of the tightening processes. Mr Gerhard Visser, Manager, P ilot Production, Lenze Drive Systems GmbH, Aerzen, Germany 22 AT L A S C O P C O S C R E W D R I V E R S LEVEL 5 – ZERO FAULT FASTENING Functionality level 5 g Zero fault fastening Zero fault fastening is now easily achievable thanks to Atlas Copco’s ToolsNet software. Centralized trend monitoring of production line data allows problem areas to be identified and processes to be streamlined. Real-time data collection and analysis allows adjustments to be made directly to the production process. The system allows full traceability and auditing, allowing compliance with the most challenging quality control programmes. Take full control with ToolsNet • Collect data for process improvement • Access historical data and statistics • Historical and real-time data presentation • Full process traceability Traceability minimizes recall costs Data can be presented historically or in real-time and shift reports are easily generated to satisfy production managers. ToolsTalk MT Net Data collection software for the MT screwdriver range. In the event of warranty recalls, the result database provides access to critical information which can easily minimize the extent of any recall leading to an overnight payback on your investment. ToolsNet PF W10 Data collection software for the Tensor SL screwdriver. AT L A S C O P C O S C R E W D R I V E R S 23 LUM Pneumatic Screwdrivers Pistol grip shut-off models Pistol grip Balanced pistol grip Torque range Soft joint Nm in lb Model Free speed r/min Multiple air inlet Air consumption at free speed Weight l/s cfm kg Ib Length mm Air inlet thread in Distance centre to side mm Ordering No. Pistol grip models with trigger start LUM22 HR3 0.6 - 3 5.3 - 26.5 2200 7.5 16 0.85 1.9 186 1/4 18 8431 0269 00 LUM22 HR3-RE 0.6 - 3 5.3 - 26.5 2200 7.5 16 0.85 1.9 186 1/4 18 8431 0278 63 LUM22 HR4 0.6 - 4 5.3 - 35.4 1650 7.5 16 0.85 1.9 186 1/4 18 8431 0269 02 LUM22 HR4-RE 0.6 - 4 5.3 - 35.4 1650 7.5 16 0.85 1.9 186 1/4 18 8431 0278 65 LUM22 HR6 1.5 - 6.5 13.3 - 57.5 1150 7.5 16 0.85 1.9 186 1/4 18 8431 0269 01 LUM22 HR6-RE 1.5 - 6.5 13.3 - 57.5 1150 7.5 16 0.85 1.9 186 1/4 18 8431 0278 64 Pistol grip models with trigger and push start LUM22 HR3-P 0.6 - 3 5.3 - 26.5 2200 7.5 16 0.85 1.9 186 1/4 21 8431 0269 06 LUM22 HR4-P 0.6 - 4 5.3 - 35.4 1650 7.5 16 0.85 1.9 186 1/4 21 8431 0269 08 LUM22 HR6-P 1.5 - 6.5 13.3 - 57.5 1150 7.5 16 0.85 1.9 186 1/4 21 8431 0269 07 LUM22 HR10-P 3.5 - 10 31 - 88.5 750 7.5 16 1 2.2 218 1/4 21 8431 0269 09 Balanced pistol grip models with trigger start LUM12 HRX1 0.6 - 1.8 5.3 - 15.9 2300 6 13 0.65 1.4 176 1/8 15 8431 0278 58 LUM12 HRX1-RE 0.6 - 1.8 5.3 - 15.9 2300 6 13 0.65 1.4 176 1/8 16 8431 0278 59 LUM12 HRX2 0.6 - 2.5 5.3 - 22.1 1650 6 13 0.65 1.4 176 1/8 16 8431 0278 56 LUM12 HRX2-RE 0.6 - 2.5 5.3 - 22.1 1650 6 13 0.65 1.4 176 1/8 16 8431 0278 57 LUM12 HRX3 0.4 - 3.5 5.3 - 31.9 1150 6 13 0.7 1.5 186 1/8 16 8431 0278 54 LUM12 HRX3-RE 0.4 - 3.5 3.5 - 31.9 1150 6 13 0.7 1.5 186 1/8 16 8431 0278 55 LUM12 HRX5 0.4 - 5 3.5 - 44.2 850 6 13 0.7 1.5 186 1/8 16 8431 0278 51 LUM12 HRX5-RE 0.4 - 5 3.5 - 44.2 850 6 13 0.7 1.5 186 1/8 16 8431 0278 53 LUM12 HRX5-170 0.4 - 5 3.5 - 44.2 170 6 13 0.7 1.5 196 1/8 16 8431 0278 47 LUM12 HRX5-350 0.4 - 5 3.5 - 44.2 350 6 13 0.7 1.5 186 1/8 16 8431 0278 48 LUM12 HRX5-350-RE 0.4 - 5 3.5 - 44.2 350 6 13 0.7 1.5 186 1/8 16 8431 0278 49 LUM12 HRX8 1.5 - 8 13.3 - 70.8 500 6 13 0.7 1.5 186 1/8 16 8431 0278 60 LUM12 HRX8-RE 1.5 - 8 13.3 - 70.8 500 6 13 0.7 1.5 186 1/8 16 8431 0278 61 LUM12 HRX8-50 1.5 - 8 13.3 - 70.8 50 6 13 0.7 1.5 196 1/8 16 8431 0280 25 LUM12 HRX8-110 1.5 - 8 13.3 - 70.8 110 6 13 0.7 1.5 196 1/8 16 8431 0280 27 LUM22 HRX2 1.2 - 2a 10.6 - 17.7 4500 9 19 0.9 2 187 1/4 18 8431 0269 29 1.1 - 2.6a 9.7 - 23 3200 9 19 0,9 2 187 1/4 18 8431 0278 85 LUM22 HRX3 0.6 - 3a 5.3 - 26.5 2250 9 19 0.9 2 187 1/4 18 8431 0269 22 LUM22 HRX3-RE 0.6 - 3a 5.3 - 26.5 2250 9 19 0.9 2 187 1/4 18 8431 0278 70 LUM22 HRX4 0.6 - 4a 5.3 - 35.4 1650 9 19 0.9 2 187 1/4 18 8431 0269 20 LUM22 HRX6 1.5 - 6.5a 13.3 - 57.5 1100 9 19 0.95 2.1 197 1/4 18 8431 0269 21 LUM22 HRX6-RE 1.5 - 6.5a 13.3 - 57.5 1100 9 19 0.95 2.1 197 1/4 18 8431 0278 71 LUM22 HRX2-3200 Balanced grip models with trigger start and soft stop function LUM10 HRX1-SS 0.2 - 0.6 1.8 - 5.3 800 6 13 0.65 1.4 176 1/8 16 8431 0280 02 LUM12 HRX1-SS 0.6 - 1.3 5.3 - 11.5 800 6 13 0.65 1.5 176 1/8 16 8431 0280 01 Multiple air inlet models and air-on-top models with trigger start a LUM12 HRF2 0.6 - 2.5 5.3 - 22.1 1650 6 13 0.65 1.4 190 1/8 16 8431 0269 31 LUM12 HRF3 0.4 - 3.6 3.5 - 31.9 1150 6 13 0.7 1.5 200 1/8 16 8431 0269 32 LUM12 HRF5 0.4 - 5 3.5 - 44.2 850 6 13 0.7 1.5 200 1/8 16 8431 0269 33 LUM12 HRF8 1.5 - 8 13.3 - 70.8 500 6 13 0.7 1.5 200 1/8 16 8431 0269 34 1.4 - 4 Nm with spring, Ordering No. 4210 1831 00. Recommended hose size mm: LUM10/12/21 = 6, LUM22/25 = 8, LUM22 HR/HRX10 = 10 All models: Are reversible and have quick change chuck. All data at an air pressure of 6.3 bar. For operator comfort support handle recommended for high torque, see Optional Accessories. 24 AT L A S C O P C O S C R E W D R I V E R S TECHNICAL DATA / ACCESSORIES LUM Pneumatic Screwdrivers Straight shut-off models Straight models with lever start Straight models with push start Torque range Soft joint Model Nm in lb Free speed r/min Air consumption at free speed Weight l/s cfm kg Ib Length mm Air inlet thread in Distance centre to side mm Drive type Ordering No. Straight models with push start and button reverse LUM 02 PR04-1800 0.03 - 0.32 0.027 - 0.29 1800 2.2 4.7 0.16 0.35 165 * 10 4 mm HM 8431 0146 02 LUM 02 PR04-1200 0.03 - 0.32 0.027 - 0.29 1200 2.2 4.7 0.16 0.35 165 * 10 4 mm HM 8431 0146 04 LUM 02 PR07-500 0.025 - 0.6 0.023 - 0.54 500 2.2 4.7 0.16 0.35 165 * 10 4 mm HM 8431 0146 06 LUM 02 PR07-350 0.025 - 0.6 0.023 - 0.54 350 2.2 4.7 0.16 0.35 165 * 10 4 mm HM 8431 0146 08 LUM 02 PR04-1800-Q 0.03 - 0.32 0.027 - 0.29 1800 2.2 4.7 0.16 0.35 165 * 10 3 mm Hex 8431 0146 12 LUM 02 PR04-1200-Q 0.03 - 0.32 0.027 - 0.29 1200 2.2 4.7 0.16 0.35 165 * 10 3 mm Hex 8431 0146 14 LUM 02 PR07-500-Q 0.025 - 0.6 0.023 - 0.54 500 2.2 4.7 0.16 0.35 165 * 10 3 mm Hex 8431 0146 16 LUM 02 PR07-350-Q 0.025 - 0.6 0.023 - 0.54 350 2.2 4.7 0.16 0.35 165 * 10 3 mm Hex 8431 0146 18 LUM10 PR03 0.1 - 1.5 0.8 - 13 300 3 6 0.4 0.9 206 1/8 15 1/4 Hex 8431 0146 05 LUM10 PR05 0.1 - 1.5 0.8 - 13 460 3 6 0.4 0.9 206 1/8 15 1/4 Hex 8431 0146 09 LUM10 PR12 0.1 - 1.1 0.8 - 10 1200 3 6 0.4 0.9 196 1/8 15 1/4 Hex 8431 0146 17 LUM10 PR21 0.1 - 0.7 0.8 - 6 2000 3 6 0.4 0.9 196 1/8 15 1/4 Hex 8431 0146 25 LUM12 PR1 0.6 - 1.6 5.3 - 14.2 1900 4.5 10 0.55 1.2 195 1/8 15 1/4 Hex 8431 0278 29 LUM12 PR2 0.4 - 2.3 3.5 - 20.4 1450 4.5 10 0.55 1.2 195 1/8 15 1/4 Hex 8431 0278 27 LUM12 PR3 0.4 - 3.2 3.5 - 28.3 1000 4.5 10 0.55 1.2 195 1/8 15 1/4 Hex 8431 0278 26 LUM12 PR4 0.4 - 4.2 3.5 - 37.2 750 4.5 10 0.55 1.2 195 1/8 15 1/4 Hex 8431 0278 25 LUM12 PR5 0.4 - 5 3.5 - 44.2 450 4.5 10 0.55 1.2 195 1/8 15 1/4 Hex 8431 0278 30 LUM22 PR2-3500 1.1 - 2.5 9.7 - 22.1 3500 7 15 0.75 1.7 211 1/4 15 1/4 Hex 8431 0278 89 LUM22 PR3 0.6 - 3.2 5.3 - 28.3 2100 7 15 0.75 1.7 211 1/4 15 1/4 Hex 8431 0269 61 LUM22 PR4 0.5 - 4.0 4.4 - 35.4 1600 7 15 0.75 1.7 211 1/4 15 1/4 Hex 8431 0269 55 LUM22 PR4-2300 0.7 - 4.5 5.9 - 38.2 2300 7 15 0.75 1.7 211 1/4 15 1/4 Hex 8431 0278 81 LUM22 PR5-350 0.4 - 5.0 3.5 - 44.2 350 7 15 0.75 1.7 211 1/4 15 1/4 Hex 8431 0269 60 LUM22 PR6 1.5 - 6.0 13.3 - 53.1 1000 7 15 0.75 1.7 211 1/4 15 1/4 Hex 8431 0269 56 LUM22 PR8-1100 1.5 - 8.0 13.3 - 70.8 1100 7 15 0.9 2.0 224 1/4 15 1/4 Hex 8431 0278 88 Straight models with push start, button reverse and soft stop function LUM10 PR1-SS 0.2 - 0.6 1.8 - 5.3 460 3 6 0.4 0.9 206 1/8 15 1/4 Hex 8431 0280 06 LUM12 PR1-SS 0.6 - 1.3 5.3 - 11.5 800 4.5 10 0.55 1.2 195 1/8 15 1/4 Hex 8431 0280 05 8431 0278 35 Straight models with lever start and without push start LUM12 SR1 0.6 - 1.8 5.3 - 15.9 2200 6 13 0.6 1.3 217 1/8 15 1/4 Hex LUM12 SR2 0.5 - 2.5 4.4 - 22.1 1700 6 13 0.6 1.3 217 1/8 15 1/4 Hex 8431 0278 34 LUM12 SR3 0.4 - 3.5 3.5 - 31 1200 6 13 0.6 1.3 217 1/8 15 1/4 Hex 8431 0278 33 LUM12 SR4 0.4 - 4.5 3.5 - 39.8 850 6 13 0.6 1.3 217 1/8 15 1/4 Hex 8431 0278 32 LUM22 SR3 0.6 - 3.2 5.3 - 28.3 1950 7 15 0.8 1.8 239 1/4 16 1/4 Hex 8431 0269 44 LUM22 SR4 0.6 - 4 5.3 - 35.4 1500 7 15 0.8 1.8 239 1/4 16 1/4 Hex 8431 0269 46 LUM22 SR5-300 0.4 - 5 3.5 - 44.2 300 7 15 0.8 1.8 239 1/4 16 1/4 Hex 8431 0269 51 LUM22 SR6 1.5 - 6 13.3 - 53.1 1000 7 15 0.85 1.9 239 1/4 16 1/4 Hex 8431 0269 47 a Front end 12.5 mm (4210 3918 01) included. b Optional front end 21 mm (4210 3918 02). Recommended hose size mm: LUM10/12/21 = 6, LUM22 = 8, LUM37 = 10 ESD approved: LUM 10/21/12/22 SR/PR All models are reversible and have quick change chuck. SR-models have ring reverse control. PR-models have push button reverse. b Air inlet thread M5. Nipple and coupling included accessory for all LUM 02 models, hose size diameter 6 mm. AT L A S C O P C O S C R E W D R I V E R S 25 LTV Pneumatic Screwdrivers Angle head models Angle head Torque range Soft joint Air consumption at free speed Weight l/s cfm kg Ib Length mm Air inlet thread in Angle head centre to side mm Angle head height mm Nm in lb Free speed r/min LTV009 R025-Q 0.6 - 2.5 5.3 - 22.1 1650 6 13 0.7 1.5 266 1/8 9 25 8431 0278 00 LTV009 R025-42 0.6 - 2.5 5.3 - 22.1 1650 6 13 0.7 1.5 266 1/8 9 25 8431 0278 01 LTV009 R025-6 0.6 - 2.5 5.3 - 22.1 1650 6 13 0.7 1.5 266 1/8 9 25 8431 0278 02 LTV009 R03-10 0.7 - 3 6.2 - 26.5 1400 6 13 0.7 1.5 266 1/8 9 25 8431 0278 23 LTV009 R035-Q 0.4 - 3.5 3.5 - 31 1100 6 13 0.7 1.5 266 1/8 9 25 8431 0278 03 LTV009 R035-42 0.4 - 3.5 3.5 - 31 1100 6 13 0.7 1.5 266 1/8 9 25 8431 0278 04 LTV009 R035-6 0.4 - 3.5 3.5 - 31 1100 6 13 0.7 1.5 266 1/8 9 25 8431 0278 05 LTV009 R05-Q 0.4 - 5 3.5 - 44.2 850 6 13 0.7 1.5 266 1/8 9 25 8431 0278 06 LTV009 R05-42 0.4 - 5 3.5 - 44.2 850 6 13 0.7 1.5 266 1/8 9 25 8431 0278 07 LTV009 R05-6 0.4 - 5 3.5 - 44.2 850 6 13 0.7 1.5 266 1/8 9 25 8431 0278 08 LTV009 R07-Q 1.1 - 7 9.7 - 61.9 500 6 13 0.7 1.5 266 1/8 9 25 8431 0278 09 LTV009 R07-42 1.1 - 7 9.7 - 61.9 500 6 13 0.7 1.5 266 1/8 9 25 8431 0278 10 LTV009 R07-6 1.1 - 7 9.7 - 61.9 500 6 13 0.7 1.5 266 1/8 11 28.5 8431 0278 11 LTV009 R08-6-200 1.3 - 9 11.5 - 79.6 200 6 13 0.7 1.5 266 1/8 11 28.5 8431 0278 24 LTV009 R09-Q 1.3 - 9 11.5 - 79.6 430 6 13 0.7 1.5 266 1/8 11 28.5 8431 0278 12 LTV009 R09-10 1.3 - 9 11.5 - 79.6 430 6 13 0.7 1.5 266 1/8 11 28.5 8431 0278 13 LTV009 R09-42 1.3 - 9 11.5 - 79.6 430 6 13 0.7 1.5 266 1/8 11 28.5 8431 0278 15 LTV009 R09-42M 1.3 - 9 11.5 - 79.6 430 6 13 0.7 1.5 266 1/8 11 28.5 8431 0278 16 LTV009 R09-6 1.3 - 9 11.5 - 79.6 430 6 13 0.7 1.5 266 1/8 11 28.5 8431 0278 17 LTV009 R11-Q 1.3 - 11 11.5 - 97.3 320 6 13 0.8 1.8 266 1/8 11 28.5 8431 0278 19 LTV009 R11-10 1.3 - 11 11.5 - 97.3 320 6 13 0.8 1.8 266 1/8 11 28.5 8431 0278 20 LTV009 R11-42 1.3 - 11 11.5 - 97.3 320 6 13 0.8 1.8 266 1/8 11 28.5 8431 0278 21 LTV009 R11-6 1.3 - 11 11.5 - 97.3 320 6 13 0.8 1.8 266 1/8 11 28.5 8431 0278 22 Model Ordering No. Shut-off angle models ESD approved: LTV 009. Recommended hose size mm: LTV009 = 6 All LTV 009 models are ESD approved All models: Are reversible. - 42 = 1/4” female hexagon drive for bits. - 10 = 3/8” square drive. - 6 = 1/4” square drive for sockets. - Q = 1/4” quick change chuck. 26 AT L A S C O P C O S C R E W D R I V E R S TECHNICAL DATA / ACCESSORIES Accessories – LUM/LTV Designation Exhaust hose Support handle ESD hose Torque arms adapters Installation proposal ESD approved pistol handle LUM12 HRX/HRF 4210 2052 00 4110 1355 92 8202 0501 06 – 8202 1180 67 4210 3616 04 LUM22 HR 3, 4, 6 4210 2052 00 4110 1355 92 8202 0501 10 – 8202 1180 77 4210 4337 04 LUM22 HR 10, 12 4210 2052 00 4110 1355 93 8202 0501 10 – 8202 1180 77 4210 4337 04 LUM22 HRX 3, 4, 6 4210 2052 00 4110 1355 92 8202 0501 10 – 8202 1180 77 4210 3616 04 LUM12 SR 4210 2052 00 – 8202 0501 06 4390 1735 52 8202 1180 67 – LUM12 PR 4210 2052 00 – 8202 0501 06 4390 1735 53 8202 1180 67 – LUM22 SR 4210 2053 00 – 8202 0501 10 4390 1735 51 8202 1180 77 – LUM22 PR 4210 2053 00 – 8202 0501 10 4390 1735 54 8202 1180 77 – LTV009 4210 2052 00 – 8202 0501 06 – 8202 1180 67 – Accessories included Clutch adjustment key Exhaust hose Included with all shut-off and slip clutch tools. Included with straight and air-on-top models. Quick change chuck Hose nipple Included with all straight and pistol grip tools. Included with all tools. Suspension yoke Vacuum screw pick-up Quick change chuck kit Angle-head for LTV009 Optional accessories Model RE-Conversion kits for LUM/LTV models Ordering No. Threaded clutch houses Model Ordering No. LUM12 HRF 4210 3624 99 LUM12 PR/SR 1, 2, 3, 4 4210 4386 04 LUM12 SR 4210 4137 90 LUM12 HRX/HRF 1, 3, 5, 8 4210 4386 04 LUM22 SR 4210 2057 80 LUM22 HRX/HR 2, 3, 4, 6 4210 4386 04 LTV009 4210 4137 90 LUM22 HRX/HR 10, 12 4210 4392 03 LUM22 SR/PR 3, 4, 5, 6 4210 4383 04 LUM22 SR/PR 10, 12 4210 4383 03 Vacuum screw pick up LUM02 4210 4706 80 Angle head covers Service kits LTV009 R025-R07 4210 4115 00 Model Ordering No. LTV009 R08-R11 4210 4116 00 LUM12 HRX, HRF 4081 0247 90 LUM22 HR/HRX 3, 4, 6, 12 4081 0281 90 LUM22 HR/HRX 10 4081 0282 90 LUM12 SR 4081 0254 90 LUM12 PR 4081 0250 90 LUM22 PR/SR 3, 4, 6, 12 4081 0284 90 LUM22 PR/SR 10 4081 0285 90 LUM10 PR 4081 0070 90 LTV009 4081 0248 90 Protective covers LUM22 HR 4210 3150 00 LUM22 HRX 4210 3151 00 LUM12 HRX 4210 3152 00 Suspension yoke for LTV009 4210 4461 80 Quick change chuck kit, extra wide diameter for easy handling 4210 2326 91 Angle-head for LTV009, 90° hex drive magnetic bit holder* 4210 3857 91 * Substitute for 4210 3857 XX angle heads. AT L A S C O P C O S C R E W D R I V E R S 27 EBL Screwdrivers EBL screwdriver Torque Type Model STANDARD SOFT STOP REPORTING SOFT STOP REPORTING SOFT START a EBL03 EBL03-Q EBL12 EBL12-1500 EBL20 EBL21-1500 EBL25 EBL35 EBL25-1500 a EBL45 a EBL03-SS EBL12-SS EBL20-SS EBL25-SS EBL35-SS EBL03-RE EBL03-Q-RE EBL12-RE EBL12-1500-RE EBL20-RE EBL21-1500-RE EBL25-RE EBL35-RE EBL03-SS-RE EBL12-SS-RE EBL20-SS-RE EBL25-SS-RE EBL35-SS-RE EBL12 ST EBL25 ST EBL35 ST Ncm In Ib 0.05 - 0.3 0.05 - 0.3 0.2 - 1.2 0.2 - 1.2 0.5 - 2.0 0.5 - 2.1 1.0 - 2.5 1.0 - 3.5 1.0 - 2.5 1.0 - 4.5 0.05 - 0.3 0.2 - 1.2 0.5 - 2.0 1.0 - 2.5 1.0 - 3.5 0.05 - 0.3 0.05 - 0.3 0.2 - 1.2 0.2 - 1.2 0.5 - 2.0 0.5 - 2.1 1.0 - 2.5 1.0 - 3.5 0.05 - 0.3 0.2 - 1.2 0.5 - 2.0 1.0 - 2.5 1.0 - 3.5 0.2 - 1.2 1.0 - 2.5 1.0 - 3.5 0.4 - 2.7 0.4 - 2.7 1.8 - 10.6 1.8 - 10.6 4.5 - 18 4.5 - 19 8.8 - 22.1 8.8 - 31 8.8 - 22.1 8.8 - 39.8 0.4 - 2.7 1.8 - 10.6 4.5 - 18 8.8 - 22.1 8.8 - 31 0.4 - 2.7 0.4 - 2.7 1.8 - 10.6 1.8 - 10.6 4.5 - 18 4.5 - 19 8.8 - 22.1 8.8 - 31 0.4 - 2.7 1.8 - 10.6 4.5 - 18 8.8 - 22.1 8.8 - 31 1.8 - 10.6 8.8 - 22.1 8.8 - 31 Speed r/min 870 870 910 1500 750 1500 930 700 1500 700 870 910 750 930 700 870 870 910 1500 750 1500 930 700 870 910 750 930 700 910 930 700 Weight kg Ib 0.3 0.3 0.5 0.5 0.5 0.8 0.8 0.8 0.8 0.8 0.3 0.5 0.5 0.8 0.8 0.3 0.3 0.5 0.5 0.5 0.8 0.8 0.8 0.3 0.5 0.5 0.8 0.8 0.5 0.8 0.8 0.7 0.7 1.1 1.1 1.1 1.8 1.8 1.8 1.8 1.8 0.7 1.1 1.1 1.8 1.8 0.7 0.7 1.1 1.1 1.1 1.8 1.8 1.8 0.7 1.1 1.1 1.8 1.8 1.1 1.8 1.8 Length mm Bit drive Ordering No. 185 185 215 215 215 235 235 235 235 235 185 215 215 235 235 185 185 215 215 215 235 235 235 185 215 215 235 235 215 235 235 Wing type 4mm 1/4" Hex 1/4" Hex 1/4" Hex 1/4" Hex 1/4" Hex 1/4" Hex 1/4" Hex 1/4" Hex 1/4" Hex Wing type 4mm 1/4" Hex 1/4" Hex 1/4" Hex 1/4" Hex Wing type 4mm 1/4" Hex 1/4" Hex 1/4" Hex 1/4" Hex 1/4" Hex 1/4" Hex 1/4" Hex Wing type 4mm 1/4" Hex 1/4" Hex 1/4" Hex 1/4" Hex 1/4" Hex 1/4" Hex 1/4" Hex 8431 0170 02 8431 0170 04 8431 0170 11 8431 0170 41 8431 0170 16 8431 0170 43 8431 0170 23 8431 0170 33 8431 0170 25 8431 0170 40 8431 0170 07 8431 0170 15 8431 0170 20 8431 0170 28 8431 0170 38 8431 0170 55 8431 0170 06 8431 0170 13 8431 0170 18 8431 0170 19 8431 0170 47 8431 0170 26 8431 0170 36 8431 0170 08 8431 0170 17 8431 0170 21 8431 0170 29 8431 0170 39 8431 0170 14 8431 0170 24 8431 0170 37 EBL 45 and EBL 25-1500 to be used with EBL Drive Plus. - All tool models, drives and cables are ESD and UL certified. - Tool box include cable for drive connection (standard models with 5 pins cable and reporting models with 6 pins cable). 28 AT L A S C O P C O S C R E W D R I V E R S Drive to be used EBL Drive EBL Drive Plus EBL RE Drive ST controller + EBL Drive TECHNICAL DATA / ACCESSORIES Accessories – EBL Screw pick-up system Cable options Picking and positioning of screws are many times crucial for productivity in small screw assembly. The optional equipment offers a vacuum pick-up system to simplify pre-tightening preparations. The system consists of a vacuum pump, adapters for the screwdriver a shaker tray and grids for different screw dimensions. Model Vacuum pick‑up adapters Screwdrivers can be equipped with vacuum pick‑up adapters ready to connect to a vacuum pump. The adapters are delivered without nozzles. Spiral cable, 1.3 m (5 pin) 4220 0347 00 Spiral cable, 1.3 m (6 pin) 4220 0349 00 Heavy duty, cable 2.0 m (5 pin) 4216 0132 00 Heavy duty, cable 2.0 m (6 pin) 4216 0133 00 Cable (ESD approved) Nozzle blanks They must be machined to fit the specific screw to be picked up. Ordering No. Cable (not ESD approved) Extension cableb 3.0 m (5 pin) 4220 0138 01 Extension cableb 3.0 m (6 pin) 4216 0115 00 b Maximum total length 8 m. ISO standard connectors To build your own 22 V AC network. With our components and an ordinary two core cable, min 1.5 mm2, you can quickly arrange the electric supply for a series of screwdrivers. Model Ordering No. Male plug 4220 0095 00 2-way female socket. For wall mounting (not ESD approved) 4220 0096 00 Angle head Vacuum pump Nozzle blank Vaccum pick-up adapter Model Ordering No. Vacuum pump – 220V 4220 0062 00 Vacuum pump – 115V 4220 0062 05 Vacuum pick-up adapter for EBL 03 4220 0080 30 Vacuum pick-up adapter for EBL 12/20 4220 0080 31 Vacuum pick-up adapter for EBL 21/25/35 4220 0080 33 Nozzle blank Ø 7.5 mm for EBL 03 4220 0067 03 Nozzle blank Ø 8 mm for EBL 12/20/21/25/35 4220 0070 03 Nozzle blank Ø 14 mm for EBL 12/20/21/25/35 4220 0072 03 Shaker tray Angle head adapter EBL screwdriver models EBL 25 and 35 can be equipped with a 90° angle head for access in cramped quarters. Model Ordering No. EBL screwdriver 4220 0081 02 Square drive 1/4” (06) 4210 4033 80 Hex bit drive 1/4” (42) 4210 4033 81 Hex quick change 1/4” (Q) 4210 4033 82 Adaptera (ESD approved) 4210 4609 80 a Consists of a rubber box. A variety of interchangeable rubber grid plates should be ordered separately. (see table below) Model Ordering No. Shaker tray 4220 0054 00 Need to be ordered separately. Pistol grip handle (ESD approved) Service kits Model Ordering No. Model EBL 21, 25, 35 4220 0051 05 EBL EBL 12, 20 4220 0051 04 Ordering No. 4216 6 0049 90 Grid plate For screw size, mm Ordering No. 1.2/1.4 4220 0055 00 1.7 4220 0056 00 2.0 4220 0057 00 2.3 4220 0058 00 2.6 4220 0059 00 3.0 4220 0060 00 4.0 4220 0061 00 Pistol grip handle AT L A S C O P C O S C R E W D R I V E R S 29 BCP – Battery Clutch Screwdrivers Model Square drive in Torque range Nm ft lb Torque ft Ib Min Max Speed r/min Weight (excl. battery) kg Ib Length/Height mm Ordering No. BCP – shut-off brushless tools with variable speed BCP BL2-I06 1/4 0.8 2.5 0.6 1.8 500 - 1550 0.86 1.89 200/188 8431 1273 00 BCP BL6-I06 1/4 2.0 6.0 1.5 4.4 300 - 1000 0.86 1.89 200/188 8431 1273 10 BCP BL8-I06 1/4 3.0 8.0 2.2 5.9 300 - 800 0.86 1.89 200/188 8431 1273 20 BCP BL12-I06 1/4 5.0 12.0 3.7 8.8 300 - 600 0.86 1.89 200/188 8431 1273 30 BCP BL-12L-I06 1/4 3.0 12.0 2.2 8.8 150 - 440 0.86 1.89 200/188 8431 1273 40 BCP BL-2L-I06 1/4 0.8 2.5 0.6 1.8 150 - 440 0.86 1.89 200/188 8431 1273 50 BCP BL-6L-I06 1/4 1.5 6.0 1.5 4.4 150 - 440 0.86 1.89 200/188 8431 1273 60 The tools are set at maximum speed at delivery. Accessories – BCP Battery Clutch Screwdrivers Battery charger Support handle Tool cover Colour rings 18 V. Battery Battery 18 V, 2.6 Ah. 18 V, 1.3 Ah. Battery cover Battery cover 18 V, 2.6 Ah. 18 V, 1.3 Ah. Speed setting unit Suspension yoke Weight Miscellaneous Ordering No. Speed setting unit 4211 5462 80 Support handle 4211 5421 80 Tool cover protection 4211 5415 00 Battery cover protection flat pack 4211 5601 00 Battery cover protection big pack 4211 5602 00 Suspension bail 4211 5600 00 Colour ring – red 4211 5461 02 Colour ring – orange 4211 5461 03 Colour ring – green 4211 5461 04 Colour ring – blue 4211 5461 05 Colour ring – white 4211 5461 06 Colour ring – purple 4211 5461 07 Colour ring – grey 4211 5461 08 Current V Electric charge Ah kg Ib Charge time min Ordering No. Li-Ion flat pack 18 1.3 0.37 0.81 35 4211 5426 82 Li-Ion big pack 18 2.6 0.63 1.39 70 4211 5426 83 Input V / Hz Output V /A kg Ib Ordering No. EU-contact 230V / 50Hz 18V / 1.8A 0.61 1.34 4211 5428 80 UK-contact 230V / 50Hz 18V / 1.8A 0.61 1.34 4211 5428 81 US-contact 120V / 60Hz 18V / 1.8A 0.61 1.34 4211 5428 84 Battery Charger 30 AT L A S C O P C O S C R E W D R I V E R S Weight TECHNICAL DATA / ACCESSORIES Tensor DL Screwdrivers Straight tool Angle head tool Torque range Pistol grip tool Weight Nm in Ib Speed r/min ETD DL21-04-I06 1-4 8.8 - 35.4 1 600 0.6 1.3 235 18 / 19.5 8433 4014 25 ETD DL21-07-I06 2.2 - 7.5 19.5 - 66 970 0.6 1.3 235 18 / 19.5 8433 4017 31 ETD DL21-10-I06 3 - 10 26.6 - 88.5 720 0.6 1.3 235 18 / 19.5 8433 4019 10 Model kg Ib Length mm CS distance mm Ordering No. Straight tools with lever start Push-to-start and front lights ETD DL21-01-I06-PS 0.3 - 1.2 2.6 - 10 2 200 0.6 1.3 243 18 / 19.5 8433 4010 89 ETD DL21-04-I06-PS 1-4 8.8 - 35.4 1 600 0.6 1.3 242 18 / 19.5 8433 4014 91 ETD DL21-07-I06-PS 2.2 - 7.5 19.5 - 66 970 0.6 1.3 242 18 / 19.5 8433 4017 69 ETD DL21-10-I06-PS 3 - 10 26.6 - 88.5 720 0.6 1.3 242 18 / 19.5 8433 4019 25 ETV DL21-04-I06 1-4 8.8 - 35.4 1 600 0.7 1.5 268 9 8433 4004 47 ETV DL21-04-I06-QC 1-4 8.8 - 35.4 1 600 0.7 1.5 268 9 8433 4004 73 ETV DL21-04-06 1-4 8.8 - 35.4 1 600 0.7 1.5 268 9 8433 4004 91 ETV DL21-07-I06 2.2 - 7.5 19.5 - 66 970 0.7 1.5 268 9 8433 4007 66 ETV DL21-07-I06-QC 2.2 - 7.5 19.5 - 66 970 0.7 1.5 268 9 8433 4007 79 ETV DL21-07-06 2.2 - 7.5 19.5 - 66 970 0.7 1.5 268 9 8433 4007 94 ETV DL21-20-10 5 - 20 44.2 - 180 465 0,85 1,9 285 14 8433 4008 55 ETV DL21-20-B10 5 - 20 44.2 - 180 465 0,85 1,9 285 14 8433 4008 60 ETV DL21-10-I06 3 - 12 26.6 - 106.2 610 0.7 1.5 281 11 8433 4009 34 ETV DL21-10-I06-QC 3 - 12 26.6 - 106.2 610 0.7 1.5 281 11 8433 4009 61 ETV DL21-10-06 3 - 12 26.6 - 106.2 610 0.7 1.5 281 11 8433 4009 77 ETP DL21-04-I06 1-4 8.8 - 35.4 1 600 0.6 1.3 235 20 8433 4024 19 ETP DL21-07-I06 2.2 - 7.5 19.5 - 66 970 0.6 1.3 235 20 8433 4027 26 ETP DL21-10-I06 3 - 10 26.6 - 88.5 720 0.6 1.3 235 20 8433 4029 13 Angle head tools with lever Pistol grip tools with lever start Pistol grip (push-to-start and frontlights) ETP DL21-01-I06-PS-H 0.3 - 1.2 2.6 - 10 2 200 0.6 1.3 243 20 8433 4020 77 ETP DL21-04-I06 1-4 8.8 - 35.4 1 600 0.6 1.3 242 20 8433 4024 66 ETP DL21-07-I06 2.2 - 7.5 19.5 - 66 970 0.6 1.3 242 20 8433 4027 53 ETP DL21-10-I06 3 - 10 26.6 - 88.5 720 0.6 1.3 242 20 8433 4029 28 ETV = CS distance over angle head. Tensor DL Drive – the brain of the system The DL Drive powers the screwdriver, controls the tightening process, monitors the assembly process and guides the operator to ensure the task is performed “right first time”. The DL Drive communicates easily with external sensors and PLCs for line control functionality, and is designed to interface with accessories such as bit selectors and audible and visible alarms. DL Drive Model Ordering No. DL Drive D303-DL Basic 8433 4850 48 D313-DL Advanced 8433 4850 33 AT L A S C O P C O S C R E W D R I V E R S 31 Accessories – Tensor DL DL Cable DL spiral cable Model Bit selectors, 4 positions Tensor DL pistol grip RE-alarm I/O expansion box DL cable with 90° connector Ordering No. Tensor Quality Integrated Fastening accessories Tool cable 3m 4220 2604 03 5m 4220 2604 05 10 m 4220 2604 10 15 m 4220 2604 15 Heavy duty cable 3m 4220 3265 03 5m 4220 3265 05 10 m 4220 3265 10 15 m 4220 3265 15 Cables with 90° connector a Model Ordering No. Bit selector 8433 0612 08 Bit selector pad doublea 4222 0933 92 RE-Alarm 8433 0560 03 I/O expansion box 8433 0564 38 Only compatible with Bit selector. Accessory cables Model Ordering No. 3m 4220 3705 03 I/O bus cable 0.5 m 4222 0917 00 5m 4220 3705 05 I/O bus cable 1 m 4222 0917 01 10 m 4220 3705 10 I/O bus cable 3 m 4222 0917 03 15 m 4220 3705 15 I/O bus cable 5 m 4222 0917 05 I/O bus cable 10 m 4222 0917 10 I/O bus cable 15 m 4222 0917 15 I/O Termination plug 4222 0443 00 Spiral cable straight 5m 4220 3240 05 Spiral cable with 90° connector 5m 4220 3706 05 Extension cable Pistol grip handdle 3m 4220 2795 03 5m 4220 2795 05 Model Ordering No. 10 m 4220 2795 10 Pistol grip Tensor DL 4220 2743 90 ToolsTalk DS/DL software Software ToolsTalk DS/DL Ordering No. Swedish 8092 1138 60 English 8092 1138 62 German 8092 1138 64 French 8092 1138 66 Model Max torque Pole height mm Ordering No. Spanish 8092 1138 68 SM C10 - 2 Wall mount 10 753 8202 9001 00 Italian 8092 1138 70 SM C10 - 2 Wall mount 10 753 8202 9001 10 32 AT L A S C O P C O S C R E W D R I V E R S Carbon fibre torque arm TECHNICAL DATA / ACCESSORIES Tensor SL Screwdrivers Straight tool Angle head tool Torque range Model Nm Pistol grip tool Speed r/min in Ib Weight kg Ib Length mm CS distancea mm Ordering No. Straight tool push-to-start and front lights ETD SL21-01-I06-PS 0.3 - 1.2 ETD SL21-04-I06-PS 0.8 - 4 2.7 - ETD SL21-07-I06-PS 1.5 - 7.5 13 - 66 970 0.7 1.6 246 18/19.5 8433 2107 69 ETD SL21-10-I06-PS 2.0 - 10 18 - 89 720 0.7 1.6 246 18/19.5 8433 2108 25 7 - 10 3000 0.7 1.6 246 18/19.5 8433 2102 92 35 1600 0.7 1.6 246 18/19.5 8433 2104 91 Angle head lever start ETV SL21-04-I06 0.8 - 4 7 - 35 1600 0.75 1.7 264 9 8433 2004 47 ETV SL21-04-I06-QC 0.8 - 4 8 - 35 1600 0.75 1.7 264 9 8433 2004 73 ETV SL21-04-06 0.8 - 4 9 - 35 1600 0.75 1.7 264 9 8433 2004 91 ETV SL21-07-I06 1.5 - 7.5 13 - 66 970 0.75 1.7 264 9 8433 2007 66 ETV SL21-07-I06-QC 1.5 - 7.5 14 - 66 970 0.75 1.7 264 9 8433 2007 79 ETV SL21-07-06 1.5 - 7.5 15 - 66 970 0.75 1.7 264 9 8433 2007 94 ETV SL21-12-I06 2.5 - 12 22 - 106 610 0.8 1.8 267 11 8433 2008 34 ETV SL21-12-I06-QC 2.5 - 12 23 - 106 610 0.8 1.8 267 11 8433 2008 61 ETV SL21-12-06 2.5 - 12 24 - 106 610 0.8 1.8 267 11 8433 2008 77 0.3 - 1.2 2.7 - Pistol grip push-to-start ETP SL21-01-I06-PS - 10 3000 0.85 1.9 246 20.5 8433 2201 16 1600 0.85 1.9 246 20.5 8433 2204 66 0.8 - 4 ETP SL21-07-PS 1.5 -7.5 13 - 66 970 0.85 1.9 246 20.5 8433 2207 53 ETP SL21-10-PS 2 - 10 18 - 89 720 0.85 1.9 246 20.5 8433 2208 28 a) 7 35 ETP SL21-04-PS ETD = CS distance without / with handle. All models have quick change chuck and 1/4” female hex drive for bits. ETV = CS distance over angle head. RBU – hardware key Bronze Gold Stand alone functionality: All the functionality of the silver plus: • 64 parameter sets • Autoset Power Focus 4002 drive • Batch count • Advanced line control (Cell Job) • Synchronisation in a cell Model Ordering No. Silver PF 4002 G-HW 8433 3100 00 PF 4002 C-HW 8433 3100 05 All the functionality of the bronze plus: PF 4002 G-DN-HW 8433 3140 00 PF 4002 C-DN-HW 8433 3140 05 PF 4002 G-PB-HW 8433 3142 00 PF 4002 C-PB-HW 8433 3142 20 PF 4002 G-IB-HW 8433 3145 00 PF 4002 C-IB-HW 8433 3145 05 PF 4002 G-MB-HW 8433 3147 00 PF 4002 C-MB-HW 8433 3147 05 PF 4002 G-EIP-HW 8433 3149 00 Model Ordering No. PF 4002 C-EIP-HW 8433 3149 05 RBU-Bronze 8433 0010 10 PF 4002 G-PN-HW 8433 3148 00 RBU-Silver 8433 0015 20 PF 4002 C-PN-HW 8433 3148 05 RBU-Gold 8433 0020 20 • 250 parameter sets • Integrated Ethernet • Job functionality • Multistage functionality • Cell functionality • SPC • Fieldbus options AT L A S C O P C O S C R E W D R I V E R S 33 Accessories – Tensor SL SL Cable SL Cable with 90° connector SL Spiral cable Stacklight Quality Integrated fastening accessories Cables Model MaxiDisplay Ordering No. Model Ordering No. MaxiDisplay 19” including Operator Guidance Software 1 user License* 8435 3070 10 3m 4220 3319 03 Operator Guidance Software 1 user License* 8092 1185 01 5m 4220 3319 05 Stacklight ESL-04 standard 8433 0570 13 10 m 4220 3319 10 15 m 4220 3319 15 20 m 4220 3319 20 Tool Cable Heavy duty cables Accessory cables Model Ordering No. 3m 4220 3378 03 I/O bus cable 0.5 m 4222 0917 00 5m 4220 3378 05 I/O bus cable 1 m 4222 0917 01 10 m 4220 3378 10 I/O bus cable 3 m 4222 0917 03 15 m 4220 3378 15 I/O bus cable 5 m 4222 0917 05 20 m 4220 3378 20 I/O bus cable 10 m 4222 0917 10 I/O bus cable 15 m 4222 0917 15 I/O Termination plug 4222 0443 00 Cable with 90° connector 3m 4220 3607 03 5m 4220 3607 05 10 m 4220 3607 10 15 m 4220 3607 15 20 m 4220 3607 20 Software ToolsTalk PF W10 Ordering No. 4220 3746 05 1-user license 8092 1190 01 5-user license 8092 1190 05 4220 3617 05 10-user license 8092 1190 10 Extension cable Plant license 8092 1190 99 3m 4220 2795 03 ToolsNet 4000 Reports Ordering No. 5m 4220 2795 05 05 Spindle License 8092 1410 05 10 m 4220 2795 10 10 Spindle License 8092 1410 10 25 Spindle License 8092 1410 25 Plant License 8092 1410 00 Spiral cable straight 5m Spiral cable with 90° connector 5m 34 AT L A S C O P C O S C R E W D R I V E R S ToolsNet 4000 Alert Ordering No. 05 Spindle License 8092 1411 05 10 Spindle License 8092 1411 10 25 Spindle License 8092 1411 25 Plant License 8092 1411 00 ToolsNet 4000 History Ordering No. 05 Spindle License 8092 1412 05 10 Spindle License 8092 1412 10 25 Spindle License 8092 1412 25 Plant License 8092 1412 00 TECHNICAL DATA / ACCESSORIES MicroTorque MicroTorqueTM controller ETD M 80L ETD M 27 ABL Torque range Model Ncm In lb ETD M 50 ABL Speed r/min Length mm Overall width mm ETF MT 100 Weight kg lb Bit drive Ordering No. Fixtured transducerized ETF MT 5 0.5 - 5 0.04 - 0.4 600 184 20 0.4 0.90 HM 4 mm 8432 0800 10 ETF MT 10 1 - 10 0.09 - 0.9 600 184 20 0.4 0.90 HM 4 mm 8432 0800 11 ETF MT 20 2 - 20 0.18 - 1.8 800 184 20 0.4 0.90 HM 4 mm 8432 0800 12 ETF MT 50 5 - 50 0.44 - 4.4 1000 255 30 0.76 1.67 HM 4 mm 8432 0800 13 ETF MT 80 8 - 80 0.71 - 7.1 1200 274 30 1.18 2.60 HM 4 mm 8432 0800 14 ETF MT 100 10 - 100 0.88 - 8.8 1000 274 30 1.18 2.60 1/4” HEX 8432 0800 15 ETF MT 200 20 - 200 1.77 - 17.7 800 274 30 1.18 2.60 1/4” HEX 8432 0800 16 ETF MT 500 50 - 500 4.42 - 44.2 500 260 40 1.84 4.05 1/4” HEX 8432 0800 17 Hand-held Digitork, without push-to-start ETD M 03 A 0.5 - 2.5 0.04 - 0.2 1000 132 16 0.1 0.22 Ø 2 mm 8432 0810 05 ETD M 05 A 1.5 - 5 0.13 - 0.4 750 132 16 0.1 0.22 Ø 2 mm 8432 0810 06 ETD M 10 A 3 - 10 0.27 - 0.9 750 132 16 0.1 0.22 Ø 2 mm 8432 0810 08 ETD M 20 AVB 5 - 20 0.44 - 1.8 750 146 22 0.25 0.55 HM 4 mm 8432 0810 34 ETD M 20 ACBS 5 - 20 0.44 - 1.8 750 162 22 0.25 0.55 HM 4 mm 8432 0810 31 ETD M 25 AVB 7.5 - 25 0.66 - 2.2 750 174 22 0.25 0.55 HM 4 mm 8432 0810 09 ETD M 27 ABL 7.5 - 27 0.66 - 2.4 800 185.4 29 0.25 0.5 HM 4 mm 8432 0815 02 ETD M 40 ABL 10 - 40 0.71 - 3.6 850 225.4 36 0.52 1.1 HM 4 mm 8432 0815 05 ETD M 50 ABL 15 - 50 1.33 - 4.4 850 225.4 36 0.52 1.1 HM 4 mm 8432 0815 08 ETD M 80 ABL 16 - 80 1.42 - 7.1 850 225.4 36 0.52 1.1 HM 4 mm 8432 0815 11 ETD M 40 L 10 - 40 0.71 - 3.6 850 240 27 0.65 1.43 HM 4 mm 8432 0810 25 ETD M 50 L 15 - 50 1.33 - 4.4 850 220 27 0.65 1.43 HM 4 mm 8432 0810 10 ETD M 80 L 16 - 80 1.42 - 7.1 850 240 27 0.65 1.43 HM 4 mm 8432 0810 11 ETD M 100 L 25 - 100 2.21 - 8.8 700 240 27 0.65 1.43 1/4” HEX 8432 0810 12 Hand-held Ergo Digitork, push-to-start configurable Hand-held Digitork, push-start configurable ETD M 200 L 50 - 200 4.42 - 17.7 700 240 27 0.65 1.43 1/4” HEX 8432 0810 13 ETD M 250 L 75 - 250 6.62 - 23.5 600 240 27 0.65 1.43 1/4” HEX 8432 0810 24 ETF M 05 1.5 - 5 0.13 - 0.4 800 184 20 0.4 0.90 HM 4 mm 8432 0810 15 ETF M 10 3 - 10 0.27 - 0.9 500 184 20 0.4 0.90 HM 4 mm 8432 0810 16 ETF M 20 5 - 20 0.44 - 1.8 650 184 20 0.4 0.90 HM 4 mm 8432 0810 17 ETF M 50 15 - 50 1.33 - 4.4 850 230 30 0.8 1.76 HM 4 mm 8432 0810 18 ETF M 80 16 - 80 1.42 - 7.1 850 272 30 1.2 2.64 HM 4 mm 8432 0810 19 ETF M 100 25 - 100 2.21 - 8.8 700 272 30 1.2 2.64 1/4” HEX 8432 0810 20 Fixtured Digitork ETF M 200 50 - 200 4.42 - 17.7 600 272 30 1.2 2.64 1/4” HEX 8432 0810 21 ETF M 400 150 - 400 13.27 - 35.4 320 260 40 1.8 3.96 1/4” HEX 8432 0810 22 ETF M 800 300 - 800 26.55 - 70.8 300 322 45 2.6 5.73 1/4” HEX 8432 0810 23 ETD M AXXX line: C - tool cable, V - integrated vacuum hose, B - reverse button, S - short lever, L - long lever. NOTE: ”Complete system” (single ordering number) includes: Controller, screwdriver, tool cable, Tools Talk MT, USB communication cable and power supply. Tool cable Software Model Ordering No. Model Ordering No. M - (AB)L tool - 2 m 8432 0830 37 Tools Talk MT Analysis (for graph analysis) 8432 0830 31 MT/M/M-AXXX Tool - 2 m 8432 0830 36 Tools Talk MT Analysis/Net (for graph analysis and data collection) 8432 0830 45 M - (AB)L tool - 3.5 m 8432 0831 02 MT/M/M-AXXX Tool - 3.5 m 8432 0831 01 AT L A S C O P C O S C R E W D R I V E R S 35 Accessories – MicroTorque Controller accessories Shaker tray Model Ordering No. Model Combi (Remote control + program selector) 8432 0830 88 SGQ Largea (110x110x35 mm) Remote control 8432 0830 08 Digital program selector 8432 0830 34 Vacuum pump, VPX 3 Slot mm Ordering No. SGQ 15 1.5 8432 0830 09 SGQ 20 2 8432 0830 10 8432 0830 05 SGQ 25 2.5 8432 0830 11 Vacuum pump, VPX 6 8432 0830 06 SGQ 30 3 8432 0830 12 Controller fixture table 8432 0830 84 SGQ 35 3.5 8432 0830 13 Controller fixture wall 8432 0830 32 SGQ 40 4 8432 0830 14 Footswitch 8432 0830 07 SGQ 45 4.5 8432 0830 15 Desktop socket (with screwdriver presence sensor) 8432 0831 89 SGQ 50 5 8432 0830 16 MT Stacklight table stand 8432 0830 97 SGQ 55 5.5 8432 0830 17 MT Stacklight wall mount 8432 0830 99 SGQ 60 6 8432 0830 18 Y cable for I/O connector* 8432 0831 99 MSG Smallb (70x70x15 mm) MSG 05 0.5 8432 0830 19 MSG 06 0.6 8432 0830 20 MSG 07 0.7 8432 0830 21 MSG 08 0.8 8432 0830 22 MSG 09 0.9 8432 0830 23 MSG 10 1.0 8432 0830 24 MSG 11 1.1 8432 0830 25 MSG 12 1.2 8432 0830 26 MSG 13 1.3 8432 0830 27 MSG 14 1.4 8432 0830 28 MSG 15 1.5 8432 0830 29 * cable suitable when two I/O accessories are required. MT Stacklight for wall mounting a MT Stacklight table version GHP Small GHP Mini SGQ type (big version): For screws up to 30 mm lenght. From Ø 1.5 up to Ø 6 mm. b MSG type (small version): For screws up to 10 mm lenght. From Ø 1.5 up to Ø 6 mm. Remote control Digital Program Selector Vacuum adapter Torque arm Blank nozzles Vacuum pump Shaker tray Vacuum adapters and nozzles Model Ordering No. GHP Mini 8432 0830 02 GHP Small 8432 0830 03 GHP Large 8432 0830 04 Torque arm handles Model Ordering No. ETD 03-25 xVx ( 36-44 mm bit /nozzle Ø 6 mm) 8432 0770 02 ETD 20-25 ACBx (44 mm bit /nozzle Ø 6 mm) 8432 0770 08 ETD 20-25 ACBx (64 mm bit /nozzle Ø 6 mm) 8432 0770 10 ETD 40-80 L (44 mm bit / nozzle Ø 6 mm) 8432 0770 13 ETD 40-80 L (64 mm bit /nozzle Ø 6 mm) 8432 0770 15 Model Ordering No. ETD 40-80 L (44 mm bit /nozzle Ø 8 mm) 8432 0770 17 Handle between GHP Mini and ETF 05, 10, 20 8432 0830 90 ETD 40-80 L (64 mm bit /nozzle Ø 8 mm) 8432 0770 05 Handle between GHP Small and ETF 50, 100, 200 8432 0830 53 ETD 100-250 L (50 mm bit /nozzle Ø 6 mm) 8432 0770 20 Handle between GHP Large and ETF 400, 500, 800 8432 0830 54 ETD 100-250 L (70 mm bit /nozzle Ø 6 mm) 8432 0770 23 ETD 100-250 L (50 mm bit /nozzle Ø 8 mm) 8432 0770 27 ETD 100-250 L (70 mm bit /nozzle Ø 8 mm) 8432 0770 30 ETD 100-250 L (90 mm bit /nozzle Ø 8 mm) 8432 0770 25 ETF 5-80 (44 mm bit /nozzle Ø 6 mm) 8432 0770 33 ETF 5-80 (64 mm bit /nozzle Ø 6 mm) 8432 0770 35 ETF 5-80 (44 mm bit /nozzle Ø 8 mm) 8432 0770 38 ETF 5-80 (64 mm bit /nozzle Ø 8 mm) 8432 0770 40 ETF 100-200 (70 mm bit /nozzle Ø 8 mm) 8432 0770 43 ETF 400-800 (70 mm bit /nozzle Ø 10 mm) 8432 0770 45 Blank nozzle Ø 6 mm 8432 0760 02 Blank nozzle Ø 8 mm 8432 0760 00 Blank nozzle Ø 10 mm 8432 0760 06 Torque arm adapters Model Ordering No. Adapter between GHP Mini and ETF 5-20 8432 0830 70 Adapter between GHP Mini and ETD M 3-10 8432 0831 81 Adapter between GHP Mini and ETD M 20-25 AVB 8432 0830 83 Adapter between GHP Small and ETF 50-200 8432 0830 72 Adapter between GHP Small and ETD M-L 8432 0830 73 Adapter between GHP Large and ETF 400-800 8432 0830 74 Universal adapter for GHP Small (LUM, EBL, DL, SL) 8432 0831 80 NOTE: The adapters and the handles are not included with the torque arm package, need to be ordered separately. 36 AT L A S C O P C O S C R E W D R I V E R S TECHNICAL DATA / ACCESSORIES MicroTorque Transducer Capacity Ncm In Ib Overall length mm Drive Ordering No. MT TH 1 1.0 0.09 115 Ø 3 mm 8432 0820 10 MT TH 2 2.0 0.18 115 Ø 3 mm 8432 0820 11 MT TH 5 5.0 0.44 115 Ø 3 mm 8432 0820 12 MT TH 10 10.0 0.88 115 Ø 3 mm 8432 0820 13 MT TH 20 20.0 1.77 115 1/4" 8432 0820 14 MT TH 50 50.0 4.42 124 1/4" 8432 0820 15 MT TH 100 100.0 8.85 124 1/4" 8432 0820 16 MT TH 200 200.0 17.70 124 1/4" 8432 0820 17 MT TS 1 1.0 0.09 81 Ø 3 mm 8432 0820 18 MT TS 2 2.0 0.18 81 Ø 3 mm 8432 0820 19 MT TS 5 5.0 0.44 81 Ø 3 mm 8432 0820 20 MT TS 10 10.0 0.88 81 Ø 3 mm 8432 0820 21 MT TS 20 20.0 1.77 81 Ø 3 mm 8432 0820 22 MT TS 50 50.0 4.42 98 1/4" 8432 0820 23 MT TS 100 100.0 8.85 98 1/4" 8432 0820 24 MT TS 200 200.0 17.70 98 1/4" 8432 0820 25 MT TS 500 500.0 44.25 111 1/4" 8432 0820 52 MT TR 2 2.0 0.18 76 Ø 3 mm 8432 0820 29 MT TR 5 5.0 0.44 76 Ø 3 mm 8432 0820 30 MT TR 10 10.0 0.88 76 Ø 5 mm 8432 0820 31 MT TR 20 20.0 1.77 76 Ø 5 mm 8432 0820 32 MT TR 50 50.0 4.42 105 1/4” 8432 0820 33 MT TR 100 100.0 8.85 105 1/4” 8432 0820 34 MT TR 200 200.0 17.70 105 1/4" 8432 0820 35 MT TR 500 500.0 44.25 105 1/4" 8432 0820 36 MT TRA 2 2.0 0.18 76 Ø 3 mm 8432 0820 41 MT TRA 5 5.0 0.44 76 Ø 3 mm 8432 0820 42 MT TRA 10 10.0 0.88 76 Ø 5 mm 8432 0820 43 MT TRA 20 20.0 1.77 76 Ø 5 mm 8432 0820 44 MT TRA 50 50.0 4.42 105 1/4” 8432 0820 45 MT TRA 100 100.0 8.85 105 1/4” 8432 0820 46 MT TRA 200 200.0 17.70 105 1/4" 8432 0820 47 MT TRA 500 500.0 44.25 105 1/4" 8432 0820 48 Model Manual screwdriver torque transducer Static reaction torque transducer In-line rotary torque transducer In-line rotary torque and angle transducer Fastener Torque analyzer Joint kit Model Ordering No. ACTA MT 4 (programable over keypad) 8432 0820 04 ToolsTalk MT Analysis (trace analysis) 8432 0830 31 Transducer cable 8432 0830 35 RS232 cable ACTA MT 8432 0831 39 ACTA MT 4 Fasteners for joint kits Stationary transducer. Accessories, stationary torque transducers Bit Drive Ordering No. Joint Kit Ordering No. DIN7985 PH0 M1.6x4 V2A PH0 4023 0005 01 M1.6 for MT TS - 3H7 adapter (up to 20 Ncm) 8432 0830 79 ISO14583 TX6 M2.0x10 V2A TX6 4023 0005 02 M2 for MT TS - 1/4" adapter (up to 50 Ncm) 8432 0830 78 ISO14583 TX8 M2.5x10 V2A TX8 4023 0005 03 M2.5 for MT TS - 1/4" adapter (up to 100 Ncm) 8432 0830 77 ISO14583 TX10 M3.0x10 V2A TX10 4023 0005 04 M3.0 for MT TS - 1/4" adapter (up to 200 Ncm) 8432 0830 87 ISO14583 TX20 M4.0x12 V2A TX20 4023 0005 05 M4.0 for MT TS - 1/4" adapter (up to 300 Ncm) 8432 0830 86 ISO14583 TX25 M5.0x12 V2A TX25 4023 0005 06 M5.0 for MT TS - 1/4" adapter (up to 600 Ncm) 8432 0830 85 ISO14583 TX30 M6.0x12 V2A TX30 4023 0005 07 M6.0 for MT TS - 1/4" adapter (up to 800 Ncm) 8432 0832 67 Lens head screw AT L A S C O P C O S C R E W D R I V E R S 37 Atlas Copco Screwdriver Bits – Hexagon Drive Torx bits Drive system: 1/4’’ Hexagon, Style C 6.3 Screw profile: Application: For Torx screws Drive: 1/4’’ Hexagon, Style C 6.3 Slotted bits Length mm Ordering No. TX6 25 4023 0001 60 TX8 25 4023 1329 00 TX9 25 4023 1330 00 TX10 25 4023 1321 00 TX15 25 4023 1331 00 TX20 25 4023 1322 00 TX25 25 4023 1332 00 Phillips bits TX27 25 4023 1333 00 Application: For Phillips screws Drive: 1/4’’ Hexagon, Style C 6.3 TX30 25 4023 1323 00 TX40 25 4023 1334 00 Application: For slotted screws Drive: 1/4’’ Hexagon, Style C 6.3 Blade thickness (mm) Point Blade width mm Length mm Ordering No. 0.7 3.4 25 4023 1400 21 0.8 3.9 25 4023 1400 22 1 5.5 25 4023 1400 26 Length mm Ordering No. PH0 25 4023 1326 00 PH1 25 4023 0696 01 PH2 25 4023 0697 01 PH3 25 4023 0698 01 Point Hex bits Application: For Hex-socket screws Drive: 1/4’’ Hexagon, Style C 6.3 Ordering No. 2 25 4023 1318 00 2.5 25 4023 1319 00 3 25 4023 0819 00 4 25 4023 1320 00 5 25 4023 0820 00 6 25 4023 0821 00 7 25 4023 1430 00 8 25 4023 0905 00 Length mm Ordering No. PZ1 25 4023 1101 11 PZ2 25 4023 1101 12 PZ3 25 4023 1101 13 TorxPlus bits Application: For TorxPlus screws Drive: 1/4’’ Hexagon, Style C 6.3 Length mm Ordering No. IP6 25 4023 0001 70 IP8 25 4023 0001 74 IP10 25 4023 0001 78 38 AT L A S C O P C O S C R E W D R I V E R S Length mm Ordering No. 5 25 4023 1215 00 6 25 4023 1216 00 7 25 4023 1219 00 8 25 4023 1217 00 10 25 4023 1218 00 Drive system: 3 mm Hexagon Screw profile: Application: For slotted screws Drive: 3 mm Hexagon Application: For Pozidriv screws Drive: 1/4’’ Hexagon, Style C 6.3 Point Application: For Hex-socket screws Drive: 5/16’’ Hexagon, Style C 8 Slotted bits Pozidriv bits Point Hex bits Point Length mm Point Drive system: 5/16’’ Hexagon, Style C 8 Screw profile: Blade thickness (mm) Blade width mm Length mm Ordering No. 1.8 50 4023 0004 03 0.4 2 50 4023 0004 04 0.4 2.5 50 4023 0004 05 0.5 3 50 4023 0004 06 0.5 4 50 4023 0004 07 0.5 3.5 50 4023 0004 08 0.5 4.5 50 4023 0004 09 0.8 4 50 4023 0004 10 0.8 5.5 50 4023 0004 11 0.3 SCREWDRIVER BITS Phillips bits Phillips bits Application: For Phillips screws Drive: 3 mm Hexagon Application: For Phillips screws Drive: 1/4’’ Hexagon, Style E 6.3 Length mm Ordering No. Point Length mm Ordering No. 00 50 4023 0004 00 PH00 50 4023 0001 51 0 50 4023 0004 01 PH00 70 4023 0001 52 1 50 4023 0004 02 PH00 90 4023 0001 53 PH0 50 4023 1325 00 PH1 50 4023 2320 21 PH1 70 4023 2327 21 PH1 89 4023 2335 21 PH1 152 5023 2360 21 PH2 50 4023 2320 22 PH2 70 4023 2327 22 PH2 89 4023 2335 22 PH2 152 4023 2360 22 PH3 50 4023 2320 23 PH3 70 4023 2327 23 PH3 89 4023 2335 23 PH3 152 4023 2360 23 Point Torx bits Application: For Torx screws Drive: 3 mm Hexagon Length mm Ordering No. T6 50 4023 0004 14 T7 50 4023 0004 15 T8 50 4023 0004 16 T10 50 4023 0004 17 Point Pozidriv bits Application: For Pozidriv screws Drive: 3 mm Hexagon Torx bits Length mm Ordering No. PZ0 50 4023 0004 12 PZ1 50 4023 0004 13 Point Application: For Torx screws Drive: 1/4’’ Hexagon, Style E 6.3 Length mm Ordering No. TX5 50 4023 0002 16 TX5 70 4023 0002 17 TX6 50 4023 0001 61 Slotted bits TX6 70 4023 0001 62 Application: For slotted screws Drive: 1/4’’ Hexagon, Style E 6.3 TX6 90 4023 0001 63 TX7 50 4023 0002 18 TX7 70 4023 0002 19 TX8 50 4023 2220 21 TX8 89 4023 2235 21 TX9 50 4023 2220 22 TX9 89 4023 2235 22 TX10 50 4023 2220 23 TX10 89 4023 2235 23 TX15 50 4023 2220 24 TX15 89 4023 2235 24 TX20 50 4023 2220 25 TX20 89 4023 2235 25 TX25 50 4023 2220 26 TX25 89 4023 2235 26 TX27 50 4023 2220 27 TX27 89 4023 2235 27 TX30 50 4023 2220 28 TX30 89 4023 2235 28 TX40 89 4023 2235 29 Point Drive system: 1/4’’ Hexagon, Style E 6.3 Screw profile: Blade thickness (mm) Blade width (mm) Length mm Ordering No. 3.2 0.7 49 4023 2020 21 3.9 0.8 49 4023 2020 23 4.7 0.9 49 4023 2020 24 6.3 1 49 4023 2020 26 7 1.1 49 4023 2020 27 7.9 1.2 49 4023 2020 28 9.1 1.3 49 4023 2020 29 3.2 0.7 76 4023 2030 21 3.9 0.8 76 4023 2030 23 4.7 0.9 76 4023 2030 24 D Slotted bits with finder t Application: For slotted screws Drive: 1/4’’ Hexagon, Style E 6.3 Outside dia (D) mm 9.5 d Blade thickness (t) mm Blade width (d) mm Length mm Ordering No. 0.9 4.9 95 4023 0683 00 11.1 1 6.1 93 4023 1313 00 12.7 1.1 7.4 93 4023 0684 00 14.3 1.2 8.9 96 4023 0949 00 15.9 1.3 10 95 4023 0685 00 AT L A S C O P C O S C R E W D R I V E R S 39 Hex bits Drive system: 7/16’’ Hexagon, Style E 11.2 Screwprofile Application: For Hex-socket screws Drive: 1/4’’ Hexagon, Style E 6.3 Hex bits Length mm Ordering No. 2 49 4023 1311 00 2.5 49 4023 1312 00 3 49 4023 0710 00 4 49 4023 0711 00 Point 5 49 4023 0712 00 6 49 6.35 49 8 10 Point Application: For Hex-socket screws Drive: 7/16’’ Hexagon, Style E 11.2 Length mm Ordering No. 5 70 4023 0800 00 4023 0906 00 6 70 4023 0801 00 4023 0942 00 8 70 4023 0802 00 49 4023 1369 00 10 70 4023 0760 00 49 4023 1370 00 Drive system: 1/4’’ Hexagon, Style E 6.3 Application: Suitable for bits with 1/4” Hexagon Drive TorxPlus bits Application: For TorxPlus screws Drive: 1/4’’ Hexagon, Style E 6.3 Hs L1 L D1 Length mm Ordering No. IP5 50 4023 0002 20 IP5 70 4023 0002 21 IP6 50 4023 0001 71 IP6 70 4023 0001 72 Hex drive IP6 90 4023 0001 73 IP7 50 4023 0002 23 IP7 70 4023 0002 24 IP7 90 4023 0002 25 IP8 50 4023 0001 75 IP8 70 4023 0001 76 IP8 90 4023 0001 77 IP10 50 4023 0001 79 IP10 70 4023 0001 80 IP10 90 4023 0001 81 Point D Bit holders Standard type Hex female Diameter (D) mm Diameter (D1) mm Length L mm Length L1 mm Magnetic Ordering No. 1/4" 1/4" 9.5 7.9 47.8 53.8 Yes 4023 1208 00 1/4" 1/4" 9.5 7.9 47.8 104.8 Yes 4023 1209 00 Hs L1 L Hf D Quick release type Hex drive Hex female Diameter (D) mm Length L mm Length L1 mm Magnetic Ordering No. 1/4" 1/4" 9.4 35.7 25.4 Yes 4023 1353 00 1/4" 1/4" 9.4 50 25.4 Yes 4023 0707 00 Pozidriv bits Drive system: 1/4’’ Hexagon, Style E 6.3 Application: For bits with Wing-Shank 4 mm drive Application: For Pozidriv screws Drive: 1/4’’ Hexagon, Style E 6.3 Length mm Ordering No. PZ0 50 4023 0001 41 PZ0 70 4023 0001 42 PZ1 50 4023 2420 21 PZ1 70 4023 2427 21 PZ1 89 4023 2435 21 PZ2 50 4023 2420 22 PZ2 70 4023 2427 22 PZ2 70 4023 2435 22 PZ3 50 4023 2420 23 PZ3 89 4023 2435 23 Point 40 AT L A S C O P C O S C R E W D R I V E R S Hf Adapters Ordering No. Adapter 4220 0105 00 SCREWDRIVER BITS Atlas Copco Screwdriver Bits – Wing-shank Drive Hex bits Drive system: 4 mm Wing-shank Screw profile: Application: For Hex screws Drive: Wing-shank 4 mm Torx bits Application: For Torx screws Drive: Wing-shank 4 mm Length mm Ordering No. TX1 40 4023 0002 52 TX2 60 4023 0002 53 TX3 60 4023 0002 54 TX4 60 4023 0001 90 TX5 60 4023 0001 91 TX6 60 4023 0001 92 TX8 60 4023 0001 93 TX10 60 4023 0001 94 Point Length mm Ordering No. 1.5 60 4023 0002 60 2 60 4023 0002 61 2.5 60 4023 0002 62 3 60 4023 0002 63 Point Slotted bits Application: For Slotted screws Drive: Wing-shank 4 mm Blade width mm Length mm Ordering No. TorxPlus bits 0.28 1.3 60 4023 1327 01 Application: For TorxPlus screws Drive: Wing-shank 4 mm 0.30 1.7 60 4023 1327 02 0.3 2.0 60 4023 1327 03 0.3 2.5 60 4023 1327 04 Point Length mm Ordering No. IP4 60 4023 0002 10 IP5 60 4023 0002 11 IP6 60 4023 0002 12 IP8 60 4023 0002 13 IP10 60 4023 0002 14 Point Pozidriv bits Application: For Pozidriv screws Drive: Wing-shank 4 mm Length mm Ordering No. PZ0 60 4023 0002 03 PZ1 60 4023 0002 04 PZ2 60 4023 0002 55 Point Phillips bits Application: For Phillips screws Drive: Wing-shank 4 mm Point Length mm Ordering No. PH00 40 4023 0002 56 PH0 40 4023 0002 57 PH0 60 4023 0002 03 PH1 40 4023 0002 58 PH2 40 4023 0002 59 AT L A S C O P C O S C R E W D R I V E R S 41 SCREWDRIVER BITS Atlas Copco Screwdriver Bits – Halfmoon Drive Drive system: 4 mm Halfmoon Screw profile: Torx bits Application: For Torx screws Drive: Halfmoon 4 mm Pozidriv bits Application: For Pozidriv screws Drive: Halfmoon 4 mm Length mm Ordering No. TX1 44 4023 0002 32 TX2 44 4023 0001 06 Point Length mm Ordering No. TX3 44 4023 0001 08 PZ0 44 4023 0002 26 TX3 64 4023 0001 09 PZ0 64 4023 0002 27 TX4 44 4023 0001 20 PZ1 44 4023 0002 28 TX4 64 4023 0001 21 PZ1 64 4023 0002 29 TX5 44 4023 0001 22 TX5 64 4023 0001 23 TX6 44 4023 0001 24 TX6 64 4023 0001 25 TX8 44 4023 0001 26 TX8 64 4023 0001 27 TX10 44 4023 0001 28 TX10 64 4023 0001 29 Point Phillips bits Application: For Phillips screws Drive: Halfmoon 4 mm Point Length mm Ordering No. PH000 44 4023 0001 10 PH000 64 4023 0001 11 TorxPlus bits PH00 44 4023 0001 12 PH00 64 4023 0001 13 PH0 44 4023 0001 14 Application: For TorxPlus screws Drive: Halfmoon 4 mm PH0 64 4023 0001 15 PH1 44 4023 0001 16 PH1 64 4023 0001 17 PH1 90 4023 0001 18 PH2 44 4023 0002 30 PH2 64 4023 0002 31 Hex-socket bits Nutsetter. Application: For nuts and thread-headed screws Drive: Halfmoon 4 mm Length mm Ordering No. 2.3 44 4023 0002 45 2.5 44 4023 0002 46 3 44 4023 0002 47 4 44 4023 0002 48 4.5 44 4023 0002 49 5 44 4023 0002 50 5.5 44 4023 0002 51 Point Length mm Ordering No. IP2 44 4023 0002 35 IP3 44 4023 0002 36 IP4 44 4023 0001 30 IP4 64 4023 0001 31 IP5 44 4023 0001 32 IP5 64 4023 0001 33 IP6 44 4023 0001 34 IP6 64 4023 0001 35 IP8 44 4023 0001 36 IP8 64 4023 0001 37 IP10 44 4023 0001 38 IP10 64 4023 0001 39 Point Hex bits Application: For Hex-socket screws Drive: Halfmoon 4 mm Length mm Ordering No. 1.5 44 4023 0002 41 Point 2 44 4023 0002 42 Slotted bits 2.5 44 4023 0002 43 Application: For slotted screws Drive: Halfmoon 4 mm 3 44 4023 0002 44 Blade width (mm) Adapters Blade thickness mm Length mm Ordering No. 2 0.3 44 4023 0002 37 2.5 0.3 44 4023 0002 38 3 0.4 44 4023 0002 39 Model Ordering No. 4 0.5 44 4023 0002 40 Non magnetic 4023 0002 15 42 AT L A S C O P C O S C R E W D R I V E R S Drive system: 4 mm Halfmoon Application: Suitable for bits with 1/4’’ Hexagon drive Vibration and noise emission values The declared values given in this table were obtained by laboratory type testing in accordance with the stated standards and are suitable for comparison with the declared values of other tools tested in accordance with the same standards. These declared values are not adequate for use in risk assessments and values measured in individual workplaces may be higher. The actual exposure values and risk of harm experienced by an individual user are unique and depend upon the way the user works, the workpiece and the workstation design, as well as upon the exposure time and the physical condition of the user. We, Atlas Copco Tools AB, cannot be held liable for the consequences of using the declared values, instead of values reflecting the actual exposure, in an individual risk assessment in a workplace situation over which we have no control. Power Tools may cause hand-arm vibration syndrome if their use is not adequately managed. An EU guide to managing hand-arm vibration can be found at http://www.humanvibration.com/EU/VIBGUIDE.htm We recommend a program of health surveillance to detect early symptoms which may relate to noise or vibration exposure, so that management procedures can be modified to help prevent future impairment. All values are current as of the date of this publication. For the latest information please visit www.atlascopco.com/tools/ergonomics Vibration total value Vibration value (3-axes value) (1-axis value) according to according to ISO 28927-2 ISO 8662-1 Valid from Valid until 2010 2009 Sound pressure levels and sound power levels a according to ISO 15744 Value UncerSound Sound Value 1-axis 3-axes tainty pressure power m/s2 dB(A) <2.5 <2.5 <2.5 <2.5 <2.5 <2.5 <2.5 <2.5 72 74 <70 78 <2.5 <2.5 <2.5 <2.5 <2.5 <2.5 <2.5 <2.5 <2.5 <2.5 71 <70 75 75 78 <2.5 <2.5 75 <2.5 <2.5 <70 <2.5 — <2.5 <2.5 <2.5 <2.5 <2.5 <2.5 <2.5 <2.5 — <2.5 <2.5 <2.5 <2.5 <2.5 <2.5 <2.5 <70 <70 <70 <70 <70 <70 <70 <70 <70 m/s2 Model Pneumatic screwdrivers Pistol grip Shut-off LUM10 LUM12 HRX LUM12 HRF LUM22 Straight Shut-off LUM02 LUM10 LUM12 LUM22PR LUM22SR Angle Shut-off LTV009 Battery screwdrivers BCP Electric screwdrivers EBL ETF M/MT ETD M ETD DL ETV DL ETP DL ETD SL ETV SL ETP SL m/s2 a The uncertainty in the sound levels is 3 dB(A). b Vibrations are not given for tools intended for fixtured applications. dB(A) AT L A S C O P C O S C R E W D R I V E R S 43 www.atlascopco.com 9833 1778 01 Recyclable paper. Jetlag 2010:1