DRY FILM THICKNESS GAUGES

Transcription

DRY FILM THICKNESS GAUGES
DRY FILM THICKNESS GAUGES
DESCRIPTION
STOCK NO.
Elcometer 157,
20903401
Pencil Pull-Off Probe, Ferrous
Pre-calibrated, easy-to-use, ideal
for spot check indications of coating
thickness. Insensitive to hot and cold
coatings or surfaces.
RANGE
0-25 mils.
ACCURACY
+ 15%
• Complies with ASTM D-1186
Elcometer 211
Manual Pull-Off Probe,
A1E, Ferrous
20903077
2E, Ferrous
20903042
8E, Ferrous
20903043
Lightweight, portable and rugged,
suitable for use in any environment.
Complete with leather carrying pouch,
wrist strap and calibration foils.
Size: 9” x 2” x 1”
0-40 mils.
0-70 mils.
25-250 mils.
+ 5%
+ 5%
+ 5%
• Complies with ASTM D-1186,
G 12, ASTM B 499, SSPC PA 2
Elcometer 300
Basic Models:
Ferrous/Non-Ferrous F/NF
20903078
0-50 mils. F
0-40mils NF
+ 1%
+ 1%
20903404
0-50 mils.F
0-40mils NF
+ 1%
+ 1%
20903405
20903406
20903407
20903408
20903409
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
Statistics Models:
Ferrous/Non-Ferrous,
Printer Capability
Options:
Portable Printer w/Cable
Printer Cable
Interface Lead to IBM PC
ASCII Software and Cable
Data Collection Software
An accurate, simple, quick,
non-destructive coating thickness
gage. Manufactured of ABS plastic,
the 300 is portable and lightweight.
Three models available.
• Complies with ASTM D-1186,
D-1400
Elcometer 345 2 Key SSG
Steel Structures Gage 2 Key,
20903079
Electronic Integral Probe
Features include larger foot for
better stability, auto-on, zero offset
for rough surface calibration, tamperproof calibration, liquid crystal display
and auto-off. Available in mil or micron
readout.
For pricing, availability and order placement, please call our
0-60 mils.
+ 3%
• Complies with SSPC PA-2
Instrument Hotline
1-800-422-RUST (7878)
5
DRY FILM THICKNESS GAUGES
DESCRIPTION
STOCK NO.
RANGE
ACCURACY
0-60mils.
0-200mils.
0-500mils.
+ 3%
+ 3%
+ 3%
0-60mils.
+ 3%
0-60mils.
+ 3%
0-60mils.
+ 3%
Elcometer 345 - 4 Key
Coating Thickness Gage
Basic Models:
345F1, Integral Probe, Ferrous
20903080
345F2, Integral Probe, Ferrous
20903081
345F3, Electronic Separate Probe,
20903082
Ferrous
345N1, Electronic Integral Probe,
20903084
Non-Ferrous
345FN1, Electronic Integral Probe,
20903410
Ferrous or Non-Ferrous
345FNF1, Electronic Dual Separate 20903083
Probe, Ferrous/Non-Ferrous
A microprocessor controlled digital dry
film thickness gage for measuring protective
coatings over ferrous or non-ferrous substrates.
Available with either an integral or separate probe.
Gages read in mils or microns.
• Compiles with ASTM D-1186;
D-1400
Size: 2.2: x 4.75”
Elcometer 345 - 9 Key
Statistical Model:
345F1, Separate Probe, Ferrous
345F2, Separate Probe, Ferrous
20903411
20903412
345F3, Separate Probe, Ferrous
20903413
345N1, Separate Probe,
20903085
Non-Ferrous
345FN1, Separate Probe,
20903414
Ferrous / Non-Ferrous
345FNF1, Dual Probe,
20903083
Ferrous / Non-Ferrous
Full statistics (mean, number of readings,
standard deviation), memory (up to
16,000 readings) and built-in RS232
data output to printer or PC or HP IR
printer. Mils or micron readings.
0-60mils.
0-200mils.
0-5mm
0-500mils.
0-13mm
0-60mils.
+ 3%
+ 3%
0-60mils.
+ 3%
0-60mils.
+ 3%
+ 3%
+ 3%
• Compiles with ASTM D-1186;
D-1400
Elcometer 355
Digital Coating Thickness Gage System
Ferrous/Non-Ferrous
20903087
The 355 Top model has all the Standard
model features plus 28 keys to allow for
user-defined batch identification, 10,000
reading memory capacity, high/low
reasonable limits, password protection
of calibration and set up, mean, standard
deviation, highest and lowest reading,
average and counted average mode.
0-60mils.
+ 1%
• Compiles with ASTM D-1186;
D-1400
Size: 6.9” x 3.3” x 1.6”
For pricing, availability and order placement, please call our
6
Instrument Hotline
1-800-422-RUST (7878)
DRY FILM THICKNESS GAUGES
DESCRIPTION
STOCK NO.
RANGE
ACCURACY
20903416
20903417
20903418
0-2000um
0-2000um
0-2000um
+ 3%
+ 3%
+ 3%
Mikrotest Exacto
Compact design for one-hand
operation integrated probe.
Three versions available
Type F - Ferrous
Type N - Non-ferrous
Type FN - Combination F/NF
Mikrotest Models III and IV
Coating Thickness Gage
Model III:
Accurate, portable , lightweight
measures non-magnetic coatings
over ferrous substrates. Can be
used on cylindrical parts.
Manual Models:
FM Pull-Off Type, Ferrous
20903095
GM Pull-Off Type, Ferrous
20903094
Model IV:
Similar to Model III, except the
dial moves and stops automatically,
minimizing operator error.
Automatic Models:
FM Pull-Off Type, Ferrous
20903097
GM Pull-Off Type, Ferrous
20903096
S3M Pull-Off Type, Ferrous
20903098
S5M Pull-Off Type, Ferrous
20903099
Ni100 Automatic Type
20903100
• Compiles with ASTM B499;
D1186;G12,B530;DIN50981;50982
BS5411;ISO 2178,2361
0-40mils
0-4mils.
+ 5%
+ 5%
0-40mils.
0-4mils.
8-120mils.
20-200mils.
0-4mils.
+ 5%
+ 5%
+ 5%
+ 5%
+ 5%
Size: 8.25” x 2” x 1.25”
Minitest 100/300
Coating Thickness Gage
100F, Digital Gage, Ferrous
20903101
0-60mils.
+ 2%
100N Digital Gage,
Non-Ferrous
20903102
0-60mils.
+ 2%
100FN Digital Gage,
Ferrous / Non-Ferrous
20903421
0-60mils.
+ 2%
300F Statistical Gage, Ferrous 20902422
0-60mils.
+ 2%
300N Statistical Gage, NonFerrous
20903423
0-60mils.
+ 2%
300 FN Statistical Gage,
Ferrous / Non-Ferrous
20903424
0-60mils.
+ 2%
Miniature lightweight digital coating thickness
gages that measure all non-magnetic coatings
applied to ferrous metal substrates. Model 300
has optional readings in microns or mils, a
continuous measuring model, and audible signal
for readings outside limits. Also on the Minitest
• Compiles with ASTM D 1186
300 memory for individual reads. Includes one 6V battery.
Size: 125 mm x 27mm x 18mm
For pricing, availability and order placement, please call our
Instrument Hotline
1-800-422-RUST (7878)
7
DRY FILM THICKNESS GAUGES
DESCRIPTION
STOCK NO.
RANGE
ACCURACY
Minitest 600
600 F Separate Probe, Statistical
Gage, Ferrous
20903090
600 N Separate Probe, Statistical
Gage, Non-Ferrous
20903092
600FN Separate Probe, Statistical,
Ferrous / Non-Ferrous
20903091
Available as a read-only model (basic)
or with an internal statistics package
that computes and displays high/low
values, number of readings, mean and
standard deviation. Complete with
probe and 9V battery. Size: 2.5” x 4.5” x 1”
0-60mils.
+ 2%
0-60mils.
+ 2%
0-60mils.
+ 2%
0-80mils.
+ 2%
0-80mils.
+ 2%
0-80mils.
0-80mils.
0-16mils.
+ 2%
+ 2%
+ 2%
0-80mils.
0-400mils.
0-800mils.
0-80mils.
+ 2%
+ 2%
+ 2%
+ 2%
0-80mils.
0-400mils
0-800mils.
+ 2%
+ 2%
+ 2%
0-4inches
+ 2%
Minitest 1100, 2100 & 4100
Portable coating thickness gages for
use on both ferrous and non-ferrous
metal substrates. 10,000 reading
memory capcity.
1100 FN2 Dual Probe, Ferrous /
Non-Ferrous
20903088
2100 FN2 Dual Probe, Statistical
Model
20903089
Probes:
FN-3 Dual ferrous/non-ferrous
20903425
F-2 For paint, enamel, electroplating 20903426
F-06 Micro-probe for small parts
20903427
F-2/90 Right angle probe for
tubes and pipes
20903428
F-10 For thick coatings and linings
20903429
F-20 For thick coatings and linings
20903430
N-2 For non-conductive coatings
20903431
N-2/90 Right angle probe for
tubes and pipes
20903432
N-10 For thick coatings and linings
20903433
N-20 For thick coatings and linings
20903434
N-100 For insulating coatings
over F&N
20903435
Model 4100 adds a
20903467
wide range of additional statistical
capabilities.Includes dual probe, alkaline
battery, and zero standard and calibration foils.
• Compiles with ASTM D-1186;
D-1400
PosiPen
A - Manual Pull-Off Type, Ferrous
20900129
B - Manual Pull-Off Type, Ferrous
Extreme temperatures to 450o F
20900131
Miniature pull-off gage measures
non-magnetic coatings applied to ferrous
substrates. Dual mils/microns scale,
and triple indicator. Complete with leather
pouch and certificate of calibration.
0.25-20mils
+ 10%
0.25-20mils
+ 10%
• Compiles with ASTM D-1186
SSPC PA-2
• Accuracy + 10% and 0.1 mil,
traceable to NIST
Size: 5 1/2” long
For pricing, availability and order placement, please call our
8
Instrument Hotline
1-800-422-RUST (7878)
DRY FILM THICKNESS GAUGES
DESCRIPTION
STOCK NO.
RANGE
ACCURACY
PosiTector 100
B - Thin Coating
C - Thick Coating
D - Thick, Soft Coatings
Portable ultrasonic gage nondestructively measures single or
multiple layer coating thickness on
non-metallic surfaces. Model B is
designed for measuring thin polymer
coatings on non-metal substrates.
Model C is the universal gage that
can be user-adjusted to measure a
variety of thick coating applications.
Complete with plastic carrying case,
AC adapter, certificate of calibration,
ultrasonic gel and batteries.
20903427
20903438
20903439
0.3-20mils. +0.1mils,+ 3%
2-175 mils. +0.1mils,+ 3%
48-350 mils. +0.1mils,+ 3%
• Compiles with ASTM D6132-97
PosiTector 6000
Non-Magnetic Coatings on Ferrous Metals
F - Electronic Integral Probe
20903052
FS - Electronic Separate Probe
20903060
F0S - Electronic Separate 0o Probe
20903059
F45S - Electronic Separate 45o Probe
20903053
F90S - Electronic Separate 90o Probe 20903054
FT - Electronic Integral Probe, Thick
Films
20903061
FHS - Electronic Separate Probe,
Thick Films
20903056
Non-Conductive Coatings on Non-Ferrous Metals
N - Electronic Ingegral Probe
20903062
NAS - Electronic Separate Probe,
Thin Films
20903066
NS - Electronic Separate Probe
20903068
NOS - Electronic Separate Straight
Probe
20903067
o
N45S - Electronic Separate 45 Probe 20903063
N90S - Electronic Separate 90o Probe 20903064
NHS - Electronic Separate Probe,
Non-Ferrous
20903056
Combination - All Metals
FNS - Electronic Separate Probe,
Ferrous / Non-Ferrous
20903056
FN - Electronic Integral Probe,
Ferrous / Non-Ferrous
20903057
0-60mils.
0-60mils.
0-25mils.
0-25mils.
0-25mils.
+ 1%
+ 1%
+ 1%
+ 1%
+ 1%
0-250mils.
+ 1%
0-750mils.
+ 1%
0-60mils.
+ 1%
0-2mils.
0-60mils.
+ 1%
+ 1%
0-25mils.
0-25mils.
0-25mils.
+ 1%
+ 1%
+ 1%
0-750 mils
+ 1%
0-750mils.
+ 1%
0-60mils.
+ 1%
HP IR Wireless Printer
The simplest way to print coating
20903440
n/a
thickness measurements from PosiTector
100 and 6000 memory gages. Invisible
infrared light is instantly beamed from the
PosiTector directly to the HP IR. Uses
standard 2 1/4” thermal paper.
Powered by 4-AA batteries.
Size: 7.3” x 3.6” x 2.5”, Weight: 1 pound
For pricing, availability and order placement, please call our
n/a
Instrument Hotline
1-800-422-RUST (7878)
9
DRY FILM THICKNESS GAUGES
DESCRIPTION
STOCK NO.
RANGE
ACCURACY
20900126
0-8mils.
+ 5%
20900127
0-80mils.
+ 5%
PosiTest
GM - Manual Pull-Off Type,
Thin Films
FM - Manual Pull-Off Type,
Ferrous
A magnetic coating thickness gauge
for non-destructive measurement of
non-magnetic coatings over ferrous
substrates.
Size: 8 1/2” x 2 1/2” x 1 1/4”
• Compiles with ASTM D-1186;
A153,B499,B530,E376,BS5411,
DIN50981,50982, 1502178,
SSPC PA-2
QuaNix 232
232 F1 - Separate Probe, Ferrous /
20903446
Non-Ferrous Statistical PC
Printing Model
Virtual gage connects to PC or laptop
and in conjunction with QuaNix software
has a complete test and documentation
system for lab and production control.
0-80mils.
+ 2 - 3.5%
0-80mils.
+ 2%
0-200mils.
+ 2 - 5%
0-200mils.
+ 2 - 5%
QuaNix 1200
Non-destructively measures coating
20903010
thickness over ferrous metal substrates.
Lightweight, low-cost and durable,
designed for easy, one-handed
operation. The “V” groove facilitates
measurements on curved surfaces.
Thousands of measurements possible
from one 9V battery (included). Automatic
on/off, duplex LCD display. Appearance
very similar to 1500.
Size: 6 1/2” x 2 1/2” x 1 1/3”
Weight: 5 0z. (including battery)
QuaNix 1500
1500 - Integral Probe, Ferrous /
Non-Ferrous
20903011
1500M - Integral Probe, Ferrous/
Non-Ferrous with Memory
20903464
Low-cost portable coating thickness
gage measures all non-magnetic
coatings over both ferrous and
non-ferrous metal surfaces. Two
integrated probes enable the 1500 to
measure virtually any application,
even in hard-to-reach areas. Features
include LCD display in mils and microns,
carrying case and 9V battery. The 1500M
also offers memory, block segmentation,
instant averaging, and RS-232 download
capability. Complete with software and patchcord.
• Compiles with ASTM D-1186
and ASTM D-1400
Size: 6 1/2” x 2 1/2” x 1 1/3”, Weight: 5 oz. (including battery)
For pricing, availability and order placement, please call our
10
Instrument Hotline
1-800-422-RUST (7878)
DRY FILM THICKNESS GAUGES
DESCRIPTION
STOCK NO.
RANGE
ACCURACY
QuaNix 2200 and 2300
2200 - Digital Integral Probe,
Ferrous
20903012
0-60mils.
+ 2%
2300 - Digital Integral Probe,
Non-Ferrous
20903013
0-60mils.
+ 2%
Portable, battery-operated (9V) digital
coating thickness gages measure all
non-magnetic coatings over ferrous
• Compiles with ASTM D-1186 (2200)
metal (2200) and non-ferrous metal
• Compiles with ASTM D-1400 (2300)
(2300) substrates (aluminum, copper,
etc.). Complete with carrying strap,
carrier bag, zero-plate, and 9V battery.
Available in mils or microns.
Size: 2” x 4 1/2” x 1”
QuaNix 5500
5500FN1 - Ferrous/Non-Ferrous
Probe, Statistical Printing
20903014
Combines a hand-held measurement
device and a printer all into one gage.
Provides upper and lower tolerance
settings, continuous readings, and
calibration settings for special applications. Statistical evaluation including
high/low, average standard deviation
can be stored or printed out immediately.
Values can be reviewed with the QuaNix
software program or can be transferred
into a statistical spreadsheet program.
0-80mils.
+ 2%
0-80mils.
+ 2%
0-80mils.
+ 2%
0-80mils.
+ 2%
0-80mils.
+ 2%
Size: 5” x 3 1/2” x 1 1/2”
QuaNix 7500
7500 - Integral Ferrous Probe,
Basic Model
20903015
7500 - Integral Non-Ferrous Probe,
Basic Model
20903447
7500 - Integral Dual Ferrous &
Non-Ferrous Probe
20903448
7500 Underwater Probe, Ferrous or
Non-Ferrous Statistical Model
with 100 ft. cable
20903016
Versatile coating thickness gauge has
the capability to measure coating thickness underwater using a remote probe
(up to 200 feet) and topside gage. Measures
non-magnetic coating thickness on both ferrous
and non-ferrous metal surfaces by switching
probes. 7500M with memory can hold up to
3,900 measurements in up to 999 blocks.
Downloading capability to QuaNix software
for statistical analysis also available. Complete
with leather pouch and 9V battery.
For pricing, availability and order placement, please call our
Instrument Hotline
1-800-422-RUST (7878)
11
DRY FILM THICKNESS GAUGES
Three types of dry film thickness gages are available:
• Magnetic pull-off, (Type I) for measuring non-magnetic coating thickness over ferrous metal surfaces.
• Electronic magnetic flux, constant pressure probe (Type II) for measuring non-magnetic coating thickness over
ferrous metal surfaces.
• Eddy current gages for measuring non-magnetic coating thickness or non-ferrous metal surfaces.
Helpful Hints - Dry Film Thickness Gages
• Calibration of magnetic gages should be done in accordance with SSPC-PA2, “SSPC method for measurement of dry paint thickness with magnetic gages.”
• Verify calibration of Type I gages before, during and after use, using NIST standard plates.
• Exposed magnets naturally attract iron fillings, steel grit, etc. Assure the magnet is free of contamination,
including paint.
• Vibrations may prematurely lift the magnet from the surface, giving erroneous readings.
• Dial gages are susceptible to “human error” by continuing to turn the dial beyond the point the magnet lifts
from the surface.
• Calibration of constant pressure probe gages should be done in accordance with SSPC-PA2, “SSPC Method
for Measurement of Dry Coating Thickness with Magnetic Gages”.
• Verify calibration of Type II gages before, during, and after use, using either traceable standards (test blocks) or
•
•
•
plastic shims (reference the manufacturer’s instructions).
Many electronic gages can be susceptible to flux leakage problems within a few inches from edges or corners.
Eddy current gages for use on non-ferrous metals are calibrated using only the plastic shim method.
Constant pressure probe gages are less susceptible to vibrations.
CSI Coating Systems Inc.
a Corrpro Company
CSI provides complete protective coating systems engineering and application
services. Experienced in all aspects of corrosion control, our approach is to
investigate your corrosion problems and recommend coating solutions. CSI offers
internal and external fusion bonded powder coatings, internal and external liquid
systems, metallizing, fiberglassing, and plural component applications. Our extralarge 55 foot curing oven and automated “in-line” process equipment ensures
efficient application.
Our head office and shop facility is located in Nisku, Alberta, Canada. For maximum efficiency our 30,000 square foot
facility is equipped with four 7.5 tonne overhead cranes, with craneways extending fully outside the building. Every
project is inspected by CSI’s full time NACE Certified Coating Inspector at critical “hold” points, as defined in our
Quality Assurance Program, assuring the end product meets specification and is delivered on time. CSI maintains all
records on each project for review and audit when requested.
CSI’s complete fleet of mobile equipment allows us to prepare the surface, coat, cure,
and inspect coating applications at any site. Typical jobs include internal epoxy and/
or fiberglass reinforced linings and external coating of vessels and large diameter
storage tanks. CSI also owns large indirect-fired heaters needed during cold weather
jobs, so CSI can perform coatings in any season, on any size of storage tank.
For pricing, availability and order placement, please call our
12
Instrument Hotline
1-800-422-RUST (7878)