Price List Workshop 2015

Price List Workshop 2015
Partners
700013
Grip Tape Std
700014 Grip Tape Heavy Duty
Solvent activated grip tape.
A DeLuxe advanced solvent
2" x 36 y handles approx
Grip Tape.
65 grips.
New 2015
Masking Tape (Std & Heavy Duty)
Water Tape 2" x 9" Strips
New 2015
700016
1" x 60"
700023 Each
700017
2" x 60"
700024 25-pack
700018
2" x 60"
New 2015
(HD)
New 2015
110320 Tape Removal Shaft Holder
700019 Club Tape Demo
Designed to hold the shaft in place and prevent
New 2015
damage to shafts during tape removal.
3" x 18 y
110521 Professional Grip Knife
The best of the best utility knife for removing old grips, plastic
collars, etc. The compound configuration positions the hand
at the correct angle over the work.
400606 Hook blade replacement for 110521
400607 Straight blade replacement for 110521
110300 Grip Tape Remover
A tape scraper that easily peels off old grip tape on steel and
graphite shafts. A special bull-nose blade prevents gouging!
400600 Replacement Blade for Grip Tape Remover 2-Pack
160900 Grip Sizer
700022 Grip Tape Remover Uneekscraper
Easy way to get the right
This scraper is the fastest and safest way to
grip size, for the golfer!
remove grip tape from graphite or steel shafts.
New 2015
110800-12 Classic Blade Style Grip Remover
Designed as an alternative to using solvents or compressed air, the Classic Blade Grip
Remover allows club-makers to reuse rubber or composition grips. Have a channel
to funnel solvent under the grip to loosen the tape. The channel also strengthens the
blade to give some leverage when working the grip loose. There are no sharp edges
that may cut or slice through the grip.
Note: The Classic Blade Grip Remover may not work well with cord grips
or Winn grips, grips that have underlistings or grips that do not stretch.
110850 Air Gripper
Designed to help you quickly install and safely uninstall grips. It features a
transparent, removable, blow-out prevention tube with machined ridges
for better handling. Original grips can be removed and preserved for re-installation
without damage. Air compressor required. Universal adapter included.
110220 AUTO-CUT Automatic Grip Tape Dispenser**
The only grip tape dispenser of its kind that automatically cuts the grip tape to the
required length accurately - time after time. Grip tape can be dispensed in length
from 1 inch right up to 11 inches.
New 2015
110210 Geared Grip Tape Dispenser**
A robust grip tape dispenser. This unit is either a
stand-alone or can be bench-mounted.
110215 Geared Grip Tape Dispenser with Buildup Tape Spool**
Now a dispenser to handle two-sided grip tape and build-up tape.
stand-alone or can be bench-mounted.
700011 RattleStop 4oz
New 2015
Rattlestop is a thick, one part liquid that will
New 2015
800002 Epoxy Mixing Sticks
25-Pack
not set up. A small amount placed in a metal
head will catch loose particles, eliminating noise.
New 2015
GRIP SOLVENT from Bramton Tec.
700000 Solvent Spray 4oz
New 2015
700001 Solvent Spray 8oz
700002 Solvent Quart
700003 Solvent Spray Quart
700004 Solvent Spray Gallon
700005 Spray Pump
Wishon Golf & Bramton Tec. Epoxy
New 2015
#105
Epoxy 8oz
Wishon Golf 12-timmars
700007
Epoxy 8oz
Bramton Tec. 20-timmars
#106
Epoxy 16oz
Wishon Golf 12-timmars
700008
Epoxy 16oz
Bramton Tec. 20-timmars
700026
Epoxy 32oz
Bramton Tec. 20-timmars
#107
Fast Epoxy 4oz
700009
Fast Epoxy 4oz
Bramton Tec. 60 min.
700010
Fast Epoxy 8oz
Bramton Tec. 60 min.
700025
Fast Epoxy 16oz
700015
Super Rapid Epoxy 1oz
Wishon Golf 60 min.
Bramton Tec. 60 min.
Cure in 15-20 min.
060121 Classic Shaft Tip Gauge
The shaft tip identification gauge is a must-have tool for re-shafting and
identifying almost any shaft on the market today. Measures shaft tip
diameter, and step length.
400189 Tungsten Powder
4oz
This high-quality powder flows as smoothly as the sands of an hourglass!
Easily pours down grip chutes, hosel weight ports, etc. Pour it, pack it, or
mix it with epoxy glue or rattle stop to increase swing weight.
Shafting Glass Beads
400130 2oz
700012 4oz
Adding glass beads to the epoxy mix reduces viscosity and provides a consistent
cushion between the shaft and hosel wall which eliminates the possibility of shafting
the clubhead off-center.
New 2015
800013 Metal Wood Hosel Plugs 5-Pack
400125 5G Stick-On Lead Swing Weight Patch
Used to make adjustments to the swing weight of golf clubs and alter
ball flight trajectory characteristics. This stick-on lead swing weight
adjustment patches are inexpensive, easy and convenient to use.
700020 Lead Tape 1/2" x 100" 0,005 mm
New 2015
700021 Lead Tape 1/2" x 100" 0,01 mm
400123 Universal Counter Balancing and Swing Weighing System
A practical way of back weighing graphite shafted clubs; the system features a
tube with externally fluted ribs that snugly fits into most steel or graphite
shafted clubs. Suitable for Counter-balancing and or precision swing-weighting.
220500-06G-P6 6g Counter Balancing Lead Weights
Grip Spray Needles
6-Pack
5-Pack
#800004 Corks for Woods
400146 Short
#800005 Corks for Irons
400145 Long
10-Pack
Coiled Shims Dz
220300 One Size Collapsible Brass Shim Dz
Perfect to have, when
Because of the collapsible sidewall
a hosel is just to big.
design, one size fits all shaft tips.
Weighs only 0.75g
Bore Weight Plugs
100-2
2g Brass Weight (1 swt) Dz
100-4
4g Brass Weight (2 swt) Dz
100-6
6g Tungsten Weight (3 swt) Dz
100-9
9g Tungsten Weight (4,5 swt) Dz
100-ASST
Mix of 2, 4, 6 & 9g Weights Dz
Tip Weight for Graphite Shaft
400340
2g Lead
6-pack
6 times harder than pure lead. They
400341
4g Lead
6-pack
are easily snipped for fractional
400342
6g Lead
6-pack
weighing and maximum versatility.
400334
8g
400338
10g
100-TIP 9g
Tungsten
Tungsten
Tungsten
Each
Each
Rattle-free performance.
Each (Wishon)
DeLuxe
New 2015
Lead Tip Weight for Steel Iron Shaft
400499
400335
2g
6-pack
400336
4g
6-pack
400337
6g
6-pack
400338
8g
6-pack
400339
10g
6-pack
Grip Butt Weights Each
Plastic Cap 2,5 mm
400500
8g
400501
12g
A trusted method of regulating the golf swing
400502
16g
and putting stroke, back weighting heightens
400503
20g
a golfer's sense of feel. This triggers the
400504
24g
feedback mechanisms responsible for shaping
400505
28g
the swing in response to the extraweight
400506
40g
closer to the hands.
400507
60g
400508
80g
Counterweights – Tour Lock
116-12 12 gram
Installing in the end of the grip can
116-20 20 gram
improve swing speed and control
116-30 30 gram
for woods, irons and putters (60-
116-40 40 gram
80 gram).
116-60 60 gram
116-80 80 gram
116-100 100 gram
Complete Kit with Weights & Tools
190400 48” Ram-Rod for Steel and Graphite Shafts (full set)
This 48 inch ram-rod is perfect for packing cork and lead weight down the shaft.
Also ideal for the occasional ramming of stubborn clubheads that will not easily
come off shafts. Hardened spring steel wire will not bend, break or kink.
190430 Grip Cap Weight Chute
New 2015
The Grip Cap Weight Chute is a handy little tool that permits
down-the-shaft weighting without removing the grip.
020200 Swing Weight Scale Beam Balance
A simple and accurate swing weight scale for the casual clubmaker.
Measures total weight and swing weight accurately to within a
1/2 swing weight point.
020310 Pro-Shop Swing Weight Scale**
New 2015
The Pro-Shop Swing Weight Scale is designed with the retail golf store
environment in mind. It features superb accuracy and robust construction.
Measures swing weight and golf club weight in grams and ounces.
020320 Auditor Classic Swing Weight Scale
The Auditor Classic Swing Weight Scale is a virtual icon for custom
clubmaking. No other scale on the market today offers better form
and function in a classic design.
020711 Professional Digital Swing Weight Scale**
A derivation of our highly successful OEM digital swing weight scale. This
new design offers accuracy, speed, and versatility at an exceptional price.
With precision measurements to 0.3 SW-PT.
090601
Collapsible Club Length Fitting Ruler
A wrist-to-floor ruler to custom fit golfers for the correct wood and iron
length, without having to compute club length manually. It also accurately
measures the finished length of golf clubs, taking into account the lub lie
angle. And, it has a raw shaft length and tip trimming scale.
090628 Official Club Length Ruler
A golf club length measuring ruler designed for measuring according to the
R&A and USGA "Procedure for Measuring the Length of Golf Clubs." We’ve
added some additional little features to allow clubmakers to use this ruler for
trimming clubs and raw shafts to length, prior to assembly. LH & RH clubs.
090720 Bench Mount Club Length Ruler with RH-LH Lie Angle Gauge**
This ruler is a quick and accurate tool for measuring club lengths on irons,
woods and wedges. The soling plate can be adjusted to match the lie angle
of the golf club being measured to ensure proper length measurements.
090710 Auditor Club Length Tipping Ruler
This is the most reliable shaft and golf club ruler ever designed. Features
a special shaft trimming system for speed and accuracy. This is also the
ideal tool for aligning shaft spine marks and logos.
090715 Deep Throat Club Length Ruler with Lie Angle Gauge**
Only ruler than can handle difficult-to-measure clubs, belly putters and
this unique ruler provides an easy method to confirm conformance to the
latest USGA rulings for club length. The ruler features a split-level
measuring plane and a deep throat that allows the club to lie at the correct
lie angle to speed up measurement and assembly.
290100 Universal Shaft Extender
290110 Graphite Shaft Extender Std
290120 Graphite Shaft Extender Ovz
6-Pack
6-Pack
The Universal Shaft Extender is suitable for steel and graphite
shafts with an internal diameters in the range of 0.475 - 0.585”.
Will lengthen virtually any golf club. Simply apply
The extender is made of a super plastic material 6 times
epoxy, slide the extender into the shaft butt,
stronger than steel and 7 times lighter.
allow the epoxy to cure, and cut to length. Great
for salvaging shafts trimmed by mistake!
290130 Aluminum Shaft Extender
6-Pack
This shaft Extenders for steel shafts are a major improvement over the double
ended extenders commonly found in the trade. Weighing under 11 grams,
our 3" long extenders, are made lighter and straighter.
For both steel and putter shafts.
110710 Solvent Recovery Pan
A versatile, sturdy gripping-pan specially designed for club makers. Hooks up
anywhere and offers a large working plane for saving solvent to the last drop.
260501 Solvent Dispenser**
Handy dispenser keeps chemicals such as mineral spirits, acetone, naptha,
epoxy remover, and lacquer thinner from evaporating quickly and prevents
dangerous spilling. A simple "tap" on the stopper/reservoir with a small
towel, and the solvent pools to the top.
Capacity 250 ml / 8.5oz
170711 Soft Rubber Shaft Clamp
Solid rubber vise clamp secures shafts without damaging the chrome or graphite. Essential for
many re-shafting and re-gripping procedures, and an innumerable other club repairs applications.
170720 Metal Re-inforced Rubber Clamp
Used around the shop to clamp golf shafts and clubs for repairs, the metal vise clamp
is one of the most essential golf club repair tools. Unique design provides maximum
clamping power.
New 2015
New 2015
New 2015
170400 Rubber Vise Pad
110100 Grip Installer
Vulcanized non-marring rubber
An essential re-gripping tool for
pads used for clamping club-heads
Replacing worn-out grips on large butt
in a vise. The rubber vise pads are
shafts. A must-have tool to prevent
also suitable for clamping golf shafts.
grips from splitting during installation.
170310 Dial Down Shaft Clamp
New 2015
The shaft clamp you need when nothing else will do. All aluminum construction. Dial-down clamping
action. Good for steel and graphite shafts. Clamps tips, butts, and everything else in between!
170300 Constant Pressure Shaft Clamp
New 2015
The shaft clamp you need for handling super lightweight thin walled shafts. Torque
limiting knob screw prevents the application of excessive clamping power prone to
cracking shafts.
Don't crush that 55 gram shaft!
170500 Small Aluminum Shaft Clamp
A heavy-duty low profile shaft clamp specifically designed for shaft removal and tapping ferrules into
place. Assorted hole sizes fit standard tip shafts. Features a quick open-and-close hinge for added
convenience.
170600 Pro Shaft Clamp
New 2015
Grasps a full 3 inches of the shaft tip for a secure hold that will not let go. A
great tool for many jobs requiring a secured shaft, particularly shaft removal.
140300P5 Head to Shaft Drying Clips (set of 5)
An innovative way to keep the clubhead and shaft in the correct position when epoxy is curing.
This is the ideal holding fixture for Spine-aligned golf clubs, and clubs with adjustable hosels.
170100 Lever Action Clamping Vise**
An ideal shaft clamping vise. Suitable for trimming, gripping and other
repairs that require a third hand! Powerful 500lb lever action toggle
New 2015
clamp and vulcanized rubber jaws. Good for tips and butts.
170800 Ratchet Vise Clamp**
A handy ratchet vise clamp that automatically adjusts to any size
shaft and pressure level. The Jam Cam is ideal for securing shafts
and clubs for gripping, cutting, etc.
New 2015
170120 Heavy Duty Shaft Vise
A compact do-it-all shaft vise suitable for gripping, cutting shafts, shaft
extraction, and much more; where holding the shaft securely is a must.
Offered with three separate sets of rubber jaws: V-shape, round, and
aluminum round.
Bolts to a bench or vise.
171300 CM Multi-Purpose Bench Vise**
The Clubmaker Multi-Purpose Bench Vise features a 180 degree swivel base to help clubmakers
easily perform a variety of clubmaking tasks. Comes with three interchangeable jaws:
(1) Rubber V design for securing shaft tips, (2) Rubber circular design for shaft butts,
(3) Solid aluminum V for extracting broken shaft tip stubs.
080100 Combination Golf Club Assembly Kit**
This is one of the greatest clubmaking tools ever designed for the casual clubmaker.
Features a club length ruler, a clubhead lie and loft gauge, shaft tip trimming scale
and gripping station - all in one!
New 2015
100730 Bench Mount Professional Gripping Station**
Save time and money with this complete, self-contained gripping unit.
Features include a grip alignment tool, grip tape remover, solvent catch
pan, and a shaft clamp extension beam for irons and woods up to 46”.
100721 Professional Gripping Station**
Includes a new quick shaft clamp, a clubhead aligning system,
a bigger solvent recycling pan and a top-of-the-line doublesided grip tape dispenser. All included as standard features.
100725 Shop Master Gripping Station**
The Shop Master Gripping Station is the ideal gripping workstation for the retail
environment or club repair shop, with walk-in and over-the-counter service. The
gripping station is a self-contained unit that takes up very little floor space.
210101 Shaft Adapters Extraction Bolt Kit
A selection of assorted screws that thread into OEM shaft adapters so that they can be safely
removed quickly! The kit eliminates the need to clamp the adapter to be extracted in a vise or
shaft puller as improper clamping may cause the adapter to crack or go out of round rendering it
structurally useless for re-installation on a new shaft.
New 2015
210310 Mr. T Graphite Shaft Tip Extractor
Saves a lot of time when dealing with broken shaft tips! Simply cut off the splintered portion of the broken shaft
still embedded into the clubhead, then screw Mr. T into the bore of the broken shaft tip until it bottoms out.
210240 Shaft Extractor Ferrule Splitter
Made of hardened steel. A time-saving device when working with 21-series shaft extractors.
Whether a graphite or any of the steel shaft, a wood, hybrid, or iron head, this device is right for
the job.
210220 Hosel Protectors (3W/3I) pack of 6 collars
New 2015
Designed to minimize nicks, scratches, and blemishes to the hosel during the shaft extraction process.
They come in handy when working with aluminum and other various types of metal hosels,
both for woods and irons. Included in the package are 3 wood and 3 iron hosel protector collars.
210011 DIY Economy Shaft Extractor
Designed specifically for the DIY clubmaker. Design uses a reverse thrust extractor
bolt with 700 lbs of pulling power. Works with any bench vise and is fitted with a
rubber clamp to prevent damaging the shaft.
210116 Heavy Duty Compact Shaft Extractor
Built with industrial performance features is designed for the smaller shops, but is fully
capable of handling the biggest jobs. Features a newly designed 3” clamp with non-marring
rubber jaws and a T-handle to better regulate the desired pressure applied to the shaft.
210906 Professional Shaft Extractor with Built-in Hosel Plate**
Specifically aimed at the most demanding golf club repair shop that handles a
large variety of clubhead designs. It features a very long overthrow that enables
shaft extraction from long hosel bores, flat lie angles, and heads up to 460 cc.
210907 Progressive Heavy Duty Shaft Extractor**
Design engineered for maximum pulling power, with a low friction silky smooth
that provide positive feedback when extracting stroking action, super light
weight shafts and sophisticated shaft adapters.
New 2015
150631 Bending Bar with Coned Opening
This durable steel bending bar features a coned opening that provides a snug grip when it is time
to adjust the loft or lie on clubheads. Works also well on brands that feature shorter hosels.
150831 Double Ended Putter Bending Bar**
This bending bar is designed specifically for putters. Each end has slots to fit and
bend most putters with less marring. Also works with double-bend shafts.
150832 Double Bend Shaft Putter Bending Bar**
Design for bending loft and lie on single and double-bend putter shafts. This
features a 2.5” cantilevered sheave arrangement, producing a design straighter
bend transition. The guided nylon jacketed sheaves provide positive alignment
and a soft, yet secure, grip over the shaft to avoid denting.
150650 Ratchet Bending Bar with Cantilvered Brass Jaws**
This unconventional bending bar design is built around a high quality forged, bidirectional rachet wrench to allow the clubmaker to tackle wood and iron hosels
made from difficult alloys.
New 2015
150625 Short Hosel Bending Bar**
Specially designed for short hosel metalwoods, hybrids, and irons. The unique
angled head with self-squaring brass jaws is guaranteed to support the hosel
to help prevent nicks and scratches. This compact design allows a good
secure hold on the hosel in tight confined bending situations. 51 cm in length.
150610 Deluxe Brass Bending Bar
This design features slanted brass jaws to compensate for bending angle while
preventing mars and nicks. All hardened steel parts. Compact head design for short
hosel clubs.
46 cm in length.
150612 Professional Bending Bar with Brass Jaws
Heavy duty bending bar for demanding clubmakers. Features slanted
brass jaws to compensate for the bending angle while preventing
mars and nicks. All hardened steel parts.
60 cm in length.
150614 Heavy Duty FEA engineered Bending Bar**
GM took the best bending bar and optimized it to produce this unique design
For the toughest of jobs. Utilizing sophisticated FEA (Finite Element Analysis)
they eliminated high-stress areas prone to failure during bending.
New 2015
150210 Lie and Loft Bending Machine Compact
This basic lie and loft bending unit is designed to make hosel
adjustments to irons while being able to read specifications without
removing the clubhead from the bending unit. Bending bar sold separately.
150310 Professional Lie and Loft Bending Gauge**
In terms of bending accuracy, clamping power, speed and versatility, this
is the best compact, entry-level, lie and loft bending gauge on the
market. Bends cast and forged irons. Best value for your money!
New 2015
Bending Bar 150631 included free.
150505 Pro-Tour Iron and Hybrid Lie & Loft Bending Gauge**
Built around the latest iron and hybrid heads. The emphasis of this design is
on usability, precision, and reliability. This versatile design features a choice
of three clamp designs (one back and two upper), while our isostatic lower
clamp features two types of soling discs designed to conform to any iron,
Hybrid, or wedge sole design.
Professional Brass-Jaw Bending Bar included free
New 2015
150321 Professional II Lie and Loft Bending Gauge**
A robust lie and loft bending gauge with full scale angle reading.
Redesigned, the machine now ships with a hybrid clamp as standard. The
hybrid top clamp has a flexible pad that forms to the crown of the
clubhead.
Bending Bar 150631 included free.
Wishon Golf Bending Machine**
New 2015
Universal Bending Machine with custom made clamps pieces to securely hold Wishon
clubheads, that are esigned with TWGT bendable hosel technology, for lie and face angle
bending.
Bending Bar sold separately.
150950 GMX Pro-Tour Clubhead Bending Gauge**
This machine bends woods, irons, hybrids and putters in one easy setup. Currently
used by major OEMs and custom fitting centers world-wide, the machine has proven
its reliability and performance in the hands of experienced clubmakers.
Bending Bar sold separately.
150710 Compact HD Stand for all 150XXX Bending Gauges**
This compact HD bending stand requires that it be secured to a
concrete floor using anchor bolts (supplied). Designed to be used
with all GolfMechanix loft and lie bending gauges.
150760/61 Portable HD Bending Stand (Silver or Black)**
A portable bending stand designed to fit all GolfMechanix lie and loft
bending gauges. Unlike other stands which are designed using a single
tubular pillar, our design features a wide-stance base which eliminates
wobbles and provides a strong, rigid structure to work from.
New 2015
150702 Bending Stand 360 Base**
New 2015
Allows the clubmaker to quickly and conveniently alternate between right and left handed
clubs. Rather than working around the machine, the machine rotates, giving you control,
while saving time and valuable space in your work area.
150820 Putter Shaft Bending Tool**
This is one of the handiest tools around for performing quick and easy
custom alterations of putters built with single or double-bend shafts.
150826 Putter Shaft Bending Tool with Clamp**
A new and improved version of a great tool for bending double bend putter shafts. It is now easier to
use, with the addition of a clamp that holds the putter head tightly while the shaft is being bent.
150811 Compact Putter Bending Machine**
Designed for retail shops and clubmakers who wish to set up a fast turnaround putter fitting
system, where ease-of-use, speed, and accuracy are all important.
150810-HD
Bending Bar sold separately.
HD Professional Putter Bending Machine**
A unique frame and clamping mechanism especially suited for all putter designs. The new
lie and loft angle protractor arrangement, for LH and RH clubs, is just one of the new
features.
Bending Bar sold separately.
290350-1 Bendable Single Bend Putter Hosel Adapter 74 lie 0 Loft 0 Offset
Customize putter heads with a single bend putter hosel adapter for face balanced
putters. This is a bendable aluminum grade adapter with a shaft over hosel design.
290360-1 Bendable Double Bend Putter Hosel Adapter 70 lie 8 Loft 12 Offset
Customize your putter heads with a double bend for face balanced putters. This is
an aluminum grade bendable hosel ADAPTER and comes in a shaft over hosel design.
290340-1 Hosel Adapter Straight Shank 70 Lie 0 Loft 2 Offset
Customization of putter heads with a steel shank hosel adapter makes the
job fast and easy. Shaft in hosel design.
Bendable.
New 2015
290330-1 Offset Hosel Adapter 75 Lie 0 Loft 11 Offset
7075 machined aluminum putter hosel allows easy customization
of any putter head.
Not bendable.
160220-01 38~58” Conforming Telescopic Belly Putter Reshafting**
Precision built from high quality components and machined to a high level, for a
smooth, play-free 12“ sliding action. The GolfMechanix telescopic putter shaft assembly
New 2015
is the perfect kit, for retrofitting mallet putters for belly and broom style putting.
160220 Long putter Putter Fitting System 34/50” Long**
Precision built from high quality CNC machined components. Laser engraved length scale
on the shaft with a full 11" adjustment span. The GolfMechanix belly putter fitting system
feels and performs the same as a genuine custom-fit putter.
160200-32 Adjustable Loft & Lie Fitting Putter**
In a game in which the golfer is completely dependent upon being totally comfortable in the
preparation and setup for the shot, a properly fit putter is critical. Fitting the golfer for
comfort is the first step in makingthe golfer relaxed while setting up for the stroke.
110915 Putter Grip Aligning Gauge**
This is the ultimate putter grip installation tool for grip squareness and
straightness, no matter what shaft is used or how the hosel is configured.
140221 Double Bend Putter Shaft Alignment Jig RH/LH**
Provide an accurate lie angle reading as well as give a clear indication of a square position when
installing a double-bend putter shaft. It has been specifically designed for putter models
accepting double bend shafts ranging from 12mm to 25mm of offset.
160301 Putter Length Fit Assist Mirror
Allows the golfer to place their eyes directly over the ball giving them the best optical
advantage. This helps them to have their arms slightly flexed and their shoulders square
to the target, allowing for an un-impaired, natural putting stroke.
New 2015
160250 Pro-Shop Putter Fitting System**
Allows the golfer to be fit while in the correct putting posture. This helps the clubfitter
correctly measure important parameters such as putter length, hand and eye
position over the ball, lie angle, and the degree of hand -position - adjustments
needed to roll the ball properly on the green.
010610 Pocket Lie & Loft Gauge
A compact and economical hand-held protractor for measuring the lie and loft angle
on club heads. Great for also measuring the hosel exit point on bore-through designs.
New 2015
010601 Loft Angle Gauge with 2 1/2 inch Radius
The 2 1/2” protractor makes measuring loft a snap while the club is secured
in a measuring gauge. Better accommodates the larger clubhead sizes more
commonly used in today's designs.
010602 Protractor with Face Height Gauge
Gauge measures face-to-sole angle dimensions of all clubheads including woods, hybrids,
irons and putters. Sole measurements in centimeters. All stainless steel construction.
010616 Budget Lie & Loft Measuring Gauge**
This is the most economical way to measure the most important clubhead specs. The
gauge is capable of measuring loft, lie, face progression, offset and sole bounce
on all types of clubheads - both right-hand and left-hand.
160420-24 Hi Impact Resistant Lie Angle Fit board 24x14
New 2015
Unlike conventional lie angle fitting boards made of rubber, clubheads simply bounce off the
surface minimizing soot transfer, scratches and nicks to the sole. This is a distinct advantage
in a retail fitting environment where the usage of brand new demo clubs is prevalent.
010142 Hosel Rod Gauges, Set of 5 (.335, .350, .370, .395 and .410)**
Precision-turned and ground control rods for accurately mounting un-shafted wood, iron and putter
heads in lie and loft measuring gauges. A tool for referencing the shaft center-line, which is essential
for accurately measuring loft, lie, hosel offset, and face progression. All common tip sizes are
included in the set. Works with most lie and loft measuring gauges. The set includes rods suitable
for .335, .350, .370, .395, and .410. Holding stand included.
010001 Desktop Swivel Stand**
Convenient and rugged "lazy-Susan" style rotating swivel stand with locking
mechanism. Mounts to bench-top. 26 cm X 26 cm (10.25” X 10.25”)
New 2015
010710 Compact Bounce Angle Gauge**
A must-have tool for custom fitting short irons, specialty wedges, and utility clubs.
Measures bounce and dig angle, sole width, and leading edge height. Compact design
with magnetic base. Easy to use. Accurate to within 0.5 degrees.
010331 Precision Lie & Loft Measuring Gauge**
A continuous improvement in clubhead gauging instrumentation resulted in this new design. It
incorporates all the features of the more expensive and advanced models, without sacrificing
accuracy or quality.
010335 Clubmakers Lie & Loft Measuring Gauge**
Highly functional and easy to use. Built around the latest trends in clubhead design
for woods, irons, hybrids and putters, this machine is for demanding clubmakers that
need speed, precision and reliability in one package.
15% larger than 010331.
New 2015
010220 Ultimate Lie & Loft Measuring Gauge**
New 2015
A precision lie, loft, and face angle measuring gauge designed for today's oversized metalwoods and irons. Selected by professional clubfitters for optimizing launch parameters during
fitting sessions. A must-have tool for anyone with a launch monitor.
010100 Professional Lie & Loft Measuring Gauge**
A professional heavy duty golf clubhead measuring gauge used by
casting houses and OEM manufacturers to specify lie and loft angle,
hosel offset, face progression, face angle, bulge, roll, and hosel to
sole length measurements - on both woods and irons (where applicable).
190440 Shaft Tip drilling chuck and frequency tip weight**
Universal Shaft Chuck is designed to be used as both a frequency analyzer
weight and a shaft tip I.D. drill guide for unclogging epoxy when
reshafting clubs.
New 2015
The 3.6 mm drill bit is included.
030400 Frequency tip weight 205 grams
030400-454G Frequency tip weight 454 grams
030405 Frequency Tip Weight with Built-In Laser
A perfectly balanced, 205 gram, frequency tip weight with a built-in laser
and an internal long-life CR2 battery. This handy and easy-to-use tool
works great for floing shafts before assembly. Mount the tip weight on
the shaft and turn it on. Rotate shaft to align the spine in the plane.
New 2015
030010 Clubmaker's Standard Calibration Stick**
Encompassing all the calibration standards a club-maker needs to keep his
instruments in top condition; We’ve designed this unique standard that
provides base measurements for Mass, Frequency, 1st and 2nd Moment
of inertia, length and spring rate!
New 2015
030120 Reference Frequency Analyzer**
Top of the range frequency analyzer measures shaft oscillations up to 1,000 CPM with 0.1 CPM
accuracy. Easy-to-use interactive parameter setup, averaging function, cycle count mode,
and more. Built-in analog and digital computer interface. Constant pressure 5 inch clamp
with torque-limiting knob screw.
070400 Golf Clubhead CG Marker
The best way to analyze perimeter weighting and off-center hits forgiveness of both
New 2015
woods and irons. Pinpoints the center of gravity of any clubhead within a millimeter.
030420 Shaft Rotation Dial Indicator**
New 2015
An essential tool in the toolbox of clubmakers interested in spine detection and orientation. Clips
onto the butt of the shaft to give Accurate 360 degree shaft positioning, in one-degree increments.
070205 Golf Club MOI Speed Match System**
The preferred method of advanced clubmakers to custom-fit golf clubs accurately, with
a high success rate. Moment of inertia (MOI) matching of golf clubs is based on
Newton's second law of motion applied to rotational dynamics. The result is a set of
golf clubs that maximizes feel and performance for golfers of all skill levels.
Auditor MOI Speed Match software included!
050010 Manual Shaft Spine Finder**
New 2015
Provides a quick, accurate, low-cost method for locating the neutral bending axis on
a golf shaft. This ensures the correct clubhead-to-shaft orientation, improving impact
feel consistency, while minimizing shot dispersion.
050500 Shaft Deflection Board**
A compact shaft deflection analyzer designed to accommodate shafts up
to 46 inches long, with reusable flex charts. Standard 2 & 3 lb weights
included. Complies with ASTM shaft testing standards.
New 2015
050416 Shaft Testing Machine**
New 2015
Detects shaft spine orientation and magnitude. Performs flex sorting, flex zone
profiling, and flex matching. Functions and features too numerous to list.
Includes RS-232 Software Kit and Shaft Rotation Dial Indicator. Check detailed
specifications for more information. Software requires Windows XP, Vista, or 7.
120025 Hand Held Shaft Cutter Kit
Handy, manual, heavy duty cutter for tip and butt trimming steel shafts, and metal shaft
extenders, including aluminum, to length. Unlike similar cutters, this particular design
features broader guiding rollers and a stiffer stem, to prevent it from spiraling away,
allowing for a cleaner and more accurate cut.
New 2015
400327 Replacement Roller Blade for 120025 Shaft cutter. 2-Pack
130645-240V Compact Shaft Cutter and Ferrule Prepping Center**
A Shaft Cutter and Ferrule Prepping Center is the ideal tool for the small workshop or
the occasional clubmaker. It provides enough power to cut through steel and graphite
shafts, and turn ferrules down to size. Includes a dust suction outlet. 240 Volt.
Spare belts available.
New 2015
130630-U1 Shaft Prepping Feeder upgrade for 13063X**
400400 1x30” 60 Coarse Grit for Prepping Steel Shafts.
400401 1x30” 80 Coarse Grit for Prepping Steel Shafts
400402 1x30” 120 Medium Grit for Prepping Steel &Graphite Shafts
400403 1X30” 240 Fine Grit for Prepping Graphite Shafts.
400404 1X30” Ferrule finishing belt.
400405 Replacement Cut off wheel for 120300-130640-130645-130647
130647-240V Compact Heavy Duty Shaft Preping Center**
Industrial Grade Shaft Prepping Center is an integrated work station designed
to handle all of your shaft cutting and prepping needs, as well as turning down
and finishing ferrules. The powerful 0.5 Hp 3,400 RPM motor provides ample
power and is fitted with our high performance 6" cutoff wheel to easily slice
through steel and graphite shafts, with very little dust or noise pollution!
A graduated ruler ensures cutting accuracy.
240 Volt.
400410 Ferrule Finishing Belt 1X42”
120300-240V Dust-Contained Shaft Cutter**
This innovative design features a two-stage filtration system that is built directly into the
frame, preventing shaft dust from escaping.
240 Volts.
130700 Mr T Universal Ferrule Tool
A small hand-tool designed for installing ferrules of any size to the
correct insertion depth. For use on both wood and iron shafts .
130721 Ferrule Insertion Setter
Precision tool for inserting ferrules to the correct depth. Bolts onto a bench. Most designs
drive the ferrule into the shaft. The key feature of this design is that it does the
opposite - the shaft is driven into the ferrule. This prevents ferrules from being blunted.
130740 Ferrule Saver Extractor
Ever pushed a ferrule too far up the shaft? Did you just cut it off and throw it away? This simple
and ingenious device allows you to easily return a "runaway" ferrule to the desired location
(or extract it) without damaging it or the shaft.
New 2015
130300 Ferrule Trimmer**
130800 Ferrule Slicer & Splitter**
A simple and efficient tool that
A small hand-tool designed for slicing and
enables clubmakers to turn down
splitting ferrules prior to shaft extraction.
ferrules, flush with the hosel,
without the need of a belt sander.
New 2015
New 2015
130500 Ferrule Finishing and Shaft Tip Preparation Tool**
This multi-purpose tool allows for a fast, safe and inexpensive way to
finish off ferrules and "prep" shafts.
New 2015
190700 Scoreline Regrooving Tool
This is one of the finest clubhead re-scoring tools available! Excellent for converting
"V" grooves to "U" grooves. Two multi-sided tungsten carbide cutters will get the
job done quickly and easily. Includes handle, 3-point blade and 6-point blade.
400611 3 Point Cutting Blade
400612 6 Point Cutting Blade
New 2015
400610 Re-Grooving Blade Set for 190700
190300 Hosel Cleaning Wire Brush Set (woods & irons)
Super-hard stainless steel wire brush. Perfect for the removal of hardened glue
and residue from inside the hosel of club-heads. The wire brush features a short,
stiff stem and a diameter optimized to prevent the strands from collapsing.
400347 Wire Brush 9.5 mm for .335 hosel bores 3-Pack Replacement
400176 Wire Brush 10.5 mm for .370 hosel bores 3-Pack “------
190200 Shaft Tip Abrader**
The answer to abrading graphite shaft tips. Just a few turns and the coating is
fully removed for a proper shaft bond. Special wound coil stainless steel wire
brush and compression nut compensate for wear.
One size fits all shaft tips.
New 2015
180210 Quick Reaming Vise**
The Quick Reaming Vise is a clubhead vise used for re-drilling and reaming
clubhead hosels. This is the perfect tool for correcting off-centered, too small,
or too shallow hosel bores. Also great for drilling out broken graphite shaft bits.
190030 Cobalt Steel Drill bit Set for .335 .350 & .370 Hosels
For re-boring hosels on clubheads made of notoriously difficult to drill metals
such as 17-4PH, titanium and marraging steel. These HSS-Co alloyed and
Titanium nitrated twist drills hold their rigidity and hardness at higher
temperatures better than HSS drill bits.
190600 48” Long Drill set for Steel (7/32) and Graphite (5/32) Shafts
New 2015
A 48” drill bit set for making swing weight adjustments on fully assembled clubs - steel
or graphite shafted. These drill bits are perfect for clearing out shaft tips, coring out
excess epoxy glue, loosening weights and lightening up hosels quickly and effectively.
190600-396 48 Inch long Drill bit For Graphite shafts** 5/32
190600-555 48 Inch long Drill bit For Steel shafts** 7/32
New 2015
190100 Broken Shaft Tip Extractor for Woods and Irons (set)
Specifically designed for the removal of broken shaft tips. Special thread
will actually cut into shaft wall for a secure non-slip hold. High speed steel
tool grade. Four flutes. NPTF thread.
190001-01 Reamer Chucking Handle ¼"
New 2015
190100-10 Broken Shaft Extractor-Woods
190100-20 Broken Shaft Extractor-Irons
190010 .335 .350 & .370 Manual Straight Fluted Reamer Set**
New 2015
Excellent for finishing and re-conditionning hosel bores for re-shafting purposes. Finishes bores to a high
degree of accuracy and surface finish. These Straight Fluted Hand Reamers are made to exacting
specifications and will provide an ideal allowance between shaft and hosel for the perfect epoxy bond!
190010-335 .335 Manual Straight Fluted Reamer**
190010-350 .350 Manual Straight Fluted Reamer**
190010-355 .355 Manual Straight fluted tapered Hosel reamer**
190010-370 .370 Manual Straight Fluted Reamer**
New 2015
190020 Manual Spiral Fluted Hand Reamer Set for .335, .350 and .370**
For clubmakers who want the very best. These manual Spiral fluted reamers are excellent for
finishing and reconditioning hosel bores to a high degree of accuracy and surface finish.
Specifications provide a good allowance between shaft and hosel for the perfect epoxy bond!
New 2015
190001-01 Reamer Chucking Handle ¼"
190020-335 .335 Manual Spiral Fluted Hand Reamer**
190020-350 .350 Manual Spiral Fluted Hand Reamer**
190020-355 .355 Manual Spiral Fluted and Tapered Hosel Reamer**
190020-370 .370 Manual Spiral Fluted Hand Reamer**
200323-240V Programable Epoxy Cure System 3 240V**
New 2015
A compact version of our Auditor Omega Epoxy curing rack, this unit offers all the features
and advantages of the original design but with a smaller foot print and faster response time.
200310-240V Epoxy Curing System 240V**
Epoxy cure system is a time and temperature controlled golf club curing rack designed
to speed up the hardening of high strength 2 parts epoxy adhesives to full strength
within minutes instead of hours especially on cold days or when ambient room
temperature is below 20oC / 68oF.
New 2015
231100 Golf Club Track Holder
Handy shop aid lets you get on to other duties quickly without worrying about
knocking over clubs set aside for curing. Wall-mounted rack with sliding, rubber
clasps keeps clubs upright for drying. Easily accommodates a full set of irons.
400144 Track mount Rubber Shaft Clips 6-Pack
New 2015
231110 Shaft Rack
Keep clubs and shafts securely standing against your workbench, ready for the next
New 2015
step in the assembly/repair process. Easily attaches with two screws.
231120 Golf Club Display and Curing Rack**
New 2015
The Golf Club Display and Curing Rack safely holds your clubs while epoxy cures, ensuring the
bond is strong, and alignment is not compromised. It is also ideal for displaying clubs.
231125 Industrial Golf Club Curing Rack on Wheels**
A perfect solution for securing clubs for curing, and transporting around the shop or
factory floor. It will accommodate up to 22 clubs of any length and type. The lie angle
is fully adjustable, as is the height of the non-marring PVC-coated shaft rest.
New 2015
231600-580 Grip bit for .580" core 13” long
231600-600 Grip bit for .600" core 13” long
231601 Unibody Golf Grip display
Whether displaying promotional samples, assortments or custom sized
New 2015
grips, this attractive and versatile counter-top grip display, occupies very
little space and is a cost effective solution for both clubmakers and retailers.
181-TRAJ-DLX Trajectory Fitting Software**
Even if you own an expensive launch monitor, without the Trajectory Profiler software
you will not know the best driver loft for maximizing distance unless you build
several demos and have the golfer hit every one.
187-PROFILE-SYS
Shaft Bend Profile Software
Contains an ever increasing data base of the full length stiffness measurements
with weight and balance point of many different wood, iron, hybrid and fairway
shafts from many of the shaft manufacturing companies in the golf industry.
060110 Shaft and Hosel Gauge Set
A bore ID and shaft tip OD identifier compatible with most shafts on the market
today. This is an essential quality control tool for clubheads and shafts.
400163 Ferrule Shield
400133 Cool Gel
The ferrule shield protects and
A unique gelled formula sticks
cools the proprietary ferrule
without dripping or running.
while the head is being heated.
No damage to ferrules, graphite
shafts & painted surfaces.
Plain Black Ferrules Dz
Dr Ti, Wd std, Hyb & Ir
560/575 Black Ferrules (125-ir) Dz Ir
Ir 13,8 mm (lite bredare och lite längre)
Single Silver Ring Ferrules Dz Dr Ti, Wd std & Ir
Double Silver Ring Ferrules Dz Ir
Singel Red Ring Ferrules
Dz Dr Ti, Wd std & Ir
Singel Blue Ring Ferrules Dz
Dr Ti & Wd std
Single Gold Ring Ir Dz
TWGT Logo Ferrules Dz
Dr Ti, Wd std & Ir
12 Myths That Could Wreck Your Golf Game (Eng. text)
A 32-page booklet of key excerpts from Tom Wishon’s award winning and best
selling book. The 12 Myths booklet is a quick resource for learning the most
important facts about golf clubs today.
12 Myths Audio CD*
“How to Run a Successful Custom Clubmaking and Clubfitting Business”
This new book a wonderful resource of information for clubmakers who wish to
increase their business! Written by veteran Clubmaker Roy Nix of McNix Golf
in Columbus, Georgia.
The Right Sticks (Equipment Myths)
A short, sweet and gets specifically to the point in shattering 37 different golf
equipment myths perpetuated by the huge marketing campaigns of the standard
club companies.
The NEW Search for the Perfect Club
“With this book, Tom will help you understand the entire field,
make good buying decisions and get the most from your game.”
Arnold Palmer (Member, World Golf Hall of Fame)
The Search for the Perfect Driver
The latest in the Search series of truths about golf equipment
performance, is The Search for the Perfect Driver.
Common Sense Clubfitting
An in-depth section on how to identify the critical movements of the golf
swing that indicate specific fitting requirements. The book also includes a
completely new chapter on shafts, which will assuredly take shaft fitting
from a “best guess” selection to a much more focused and individual
process for ensuring the best choice of shaft for each type of golfer.
Produkter med ** är en beställningsvara. Leveranstiden ligger på 7-14 dagar.
Wishon Golf Sweden (Nordic)
Säljare/Hårdvara Peter Qvarfordt
Besöksadress Skårevägen 60 Karlstad
Telefon 0703 190 596
peter.qvarfordt@wishongolf.se
Säljare/Fakturor Hans Agardh
Telefon 0702 267 309
hans.agardh@wishongolf.se
www.wishongolf.se