luminaires for health and aged care

Transcription

LUMINAIRES FOR HEALTH AND AGED CARE
THE OBJECTIVE OF GOOD
LIGHTING DESIGN IN ANY
BUILDING IS TO PROVIDE A
WELL ILLUMINATED AND SAFE
ENVIRONMENT WHICH GIVES
OCCUPANTS A FEELING OF
WELL-BEING AND ALLOWS
THEM TO GO ABOUT THEIR
WORK WITHOUT FEAR OF
BEING LEFT IN THE DARK,
THIS IS ESPECIALLY SO IN THE
HEALTHCARE INDUSTRY.
In this catalogue, we’ve assembled a range
of luminaires to cover every aspect of lighting
requirements any hospital, clinic, retirement
village, emergency centre or doctors surgery
might need.
We know that tightening budgets can often prove
restrictive, so the fittings here aren’t just innovative
and award-winning, they’re also energy efficient
and economical.
Luminaires for Health & Aged Care
CAT-ELAA-051102
© Eagle Lighting Australia 2011
All rights reserved.
Disclaimer:
Whilst every effort has been made to ensure
the accuracy of the information in this
publication, ELA assumes no responsibility for
errors, omissions or typographical errors.
ELA reserves the right to edit material.
All details, drawings , images and
specifications are subject to change without
prior notice.
Due to ongoing research and development by the
manufacturers, lamp specifications may change.
All dimensions are nominal in millimetres.
All goods supplied by Eagle Lighting Australia
are subject to our general terms and
conditions.
For further information on any of the products
featured in this catalogue, please contact your
local Sales Representative.
Brands featured in this catalogue:
Made in Australia
CONTENTS
RECESSED
PENDANTS
Lepo
4
Pozzo I
42
Teres Edge
6
Easy LED
44
Zortini
8
Pleiad SLD G2 205
46
Globia
9
Pleiad SLD G2 245
47
Avion 50
10
Pleiad Compact G2 165
48
Closs Beta (Direct/Indirect)
11
49
DTI type 2
12
Pleiad G2 Accessories
50
Pozzo
13
Gecko IP44
51
Notor Recessed Delta
52
Notor Recessed Lamell
53
Notor Recessed Opal
54
Indigo Combo Delta 1-Cell
55
Indigo Combo Beta 1-Cell
56
Enviro
57
Flexitroffer
58
Visionline
59
Cleanroom IP44
60
Secureroom IP65/PC2
61
Gondol IP44
62
IP65
63
CEILING/WALL
Loop Light
14
Selene
16
Vidi 1
17
Vidi 2
18
Vidi 3
19
Closs Beta (Direct)
20
Teres Edge
21
Discovery Space
22
Luna
23
Elwood
24
Bells Bed
25
Eden
26
SECURITY
Bells
27
Tampa DL
64
Telescope Aqua
28
Tampa T5
65
Aqua
29
Sektor T5
30
Wall 2, Wall LED
32
LED WL
33
Pozzo
34
Zoft
35
Liverti (Surface)
36
All Five Clear
38
All Five Opal
39
Thinlite
40
Pelmet
41
MEDICAL
MSL Series 1 Ceiling Mount
66
MSL Series 3 Ceiling Mount
67
MSL Series 1 Wall Mount
68
MSL Series 3 Wall Mount
69
MSL Series 1 Mobile Trolley
70
MSL Series 3 Mobile Trolley
71
TECHNICAL INFORMATION
Lux Levels
72
BCA Requirements
73
Lepo
Design Sabina Grubbe
Lepo is a decorative T5 luminaire which offers a
combination of energy efficiency and balanced illuminance. By combining the three different sizes it’s
possible to create eye catching luminaire clusters.
PENDANTS
The centralised ballast houses a light
source on either side which creates an
even, bright surface without shadows. The
opal acrylic shade with a matt structure is
enhanced by silver coloured fastening at
the top and bottom.
Lepo is designed to spread a pleasant general light making it ideal for applications
such as lobbies, receptions and cafes. As the
light sources are not exposed at any angle it
is also an excellent solution for
staircases.
4
82
www.fagerhult.com
www.eaglelighting.com.au
523
Lepo
Luminaire
FDH
kg
2x13/14 2.7
2x21
3.7
2x25/28 4.5
PENDANTS
Installation
Two point suspension c/c 55–78 mm.
Connection
Snap-in terminal block 5 x 2.5 mm²,
through-wiring is possible.
Design
Luminaire shade in matt opal
acrylic, shade holder of silver
finished steel. Supplied with white
fabric cord and white specular steel
ceiling cup. Max. pendant length:
2x14 W: 2.0 m. 2x21 W: 3.5 m.
2x28 W: 3.3 m.
Miscellaneous
A cut-out in the ceiling cup is made
using cutters 94248 for a surface
mounted mains cable.
Designed by
Sabina Grubbe.
Suffix code
Height
680
980
1280
■ -300 SwitchDim/DSI
54580
54581
54582
■
■
Add suffix code to the end of the luminaire part number to indicate required function.
■
Accessories
Cutters/each
Light source (T5-eco)
W
Socket
Fluorescent lamp FDH
13
G5
25
G5
94248
830
840
81625
81629
81626
81630
Light source
W
Socket
830
840
21
G5
81353
81348
For further information please refer to the Light Sources chapter.
Lepo seen from below.
Ø 120
60
55 78
680/980/1280
Steel ceiling cup attached using magnets; avoiding visible screws.
Ø 160
354
www.fagerhult.com
5
Teres Edge
523
Suffix code
Lum. class Alu grey Specular metal
B
53548 53542
D
C
53547
53549
53496
53541
53543
■
■
Information on luminance classification can be found in the
Technical Information chapter.
Add suffix code to the end of the luminaire part number to indicate
required function.
Accessories
Cutters/each
Wire suspension 3-way (grey)
94248
91294
Light source
W
Socket
830
840
pendant/surface
recessed
architectural
spotlights
downlights
Circular fluorescent lamp FCH
60
2GX13
81397 81568
Compact fluorescent lamp FSD
24
2G11
81158 81301
36
2G11
81159 81471
55
2G11
81318 81473
system
Luminaire
FCH
kg
Ø
1x60
5.2 640
FSD
4x24
5.2 640
4x36
7.8 820
4x55
19.0 1252
Installation
Two point suspension, c/c 70 mm.
Connection
Snap-in terminal block 4x2.5 mm²
or 5x2.5 mm² with dimming,
1- phase through-wiring possible.
Design
Luminaire body and decorative
edging of grey enamelled structured
aluminium (RAL 9006) or luminaire
body in white enamelled structured
aluminium (RAL 9003 structured)
and decorative edging in specular
aluminium. Shades of matt opal
acrylic. Solid design that prevents
particles from collecting in the diffuser. Supplied with fabric cord cable
and wire: 2.0 m for Ø 640–820 mm,
5 m for 1252. For model Ø 1252 m,
wire suspension and cable can be
ordered as accessories separately.
Accessories
Grey ceiling cup with terminal block
and wire bracket for Teres 1252 mm.
Miscellaneous
Shades with bayonet fitting. Decorative edging is attached to the lower
shade. Surface mounted mains
cable is possible by using the cutters
94248. The luminaire is equipped
with HF-ballast.
Designed by
Olle Lundberg.
industrial
PENDANTS
Pendant
B
< 2000
A
640
820
1252
6
B
137
137
200
C
196
228
290
C
A
www.fagerhult.com
361
7
Zortini
523
Suffix code
Ø
440
440
53225
53227 ■
recessed
system
Luminaire
FCH
kg
1x22
3.4
1x40
3.4
required function.
Light source
W
Socket
830
industrial
PENDANTS
Installation
Two point suspension, c/c 53–78 mm.
Connection
or 5x2.5 mm² when dimming,
1-phase through-wiring possible.
2.5 m wire pendant and grey fabric
cord. Surface mounted cable possible.
Design
The luminaire consists of two acrylic
globes, one smoked transparent and
one matt opal diffuser positioned
around the light source. Sealed
design that prevents particles from
collecting in the diffuser. The light
source is easily replaced via the
lower opal diffuser, which is easy to
dismantle.
Designed by
Anders Hjelm.
pendant/surface
Pendant
840
architectural
spotlights
downlights
22
2GX13
81391 81565
40
2GX13
81393 81566
< 2000
140
440
8
www.fagerhult.com
369
Globia
B
B
B
A
B
B
A
A
A
A
53432
53433
53434
53435
53436
53437
53438
53439
53440
53441
53452
53453
53454
53455
53456
53457
53458
53459
53460
53461
recessed
required function.
■
■
■
Information on Luminance Classification can be found in the
Accessories
Spare glass globe Ø 250 mm
Cutter/each
industrial
250
250
300
350
300
350
400
450
400
450
93242
93218
93263
93264
93214
94248
downlights
Chrome
53430
53431
Light source
W
Socket
829
830
840
Halogen lamp IAA/C
70
E27
81651
105
E27
81652
Compact fluorescent lamp FSM-E
18
GX24q-2
81327 81475
26
GX24q-3
81309 81476
32
GX24q-3
81329 81477
42
GX24q-4
81331 81478
spotlights
Lum. class White
B
53450
B
53451
< 2000 / 2500
Ø 250–450
www.fagerhult.com
373
9
PENDANTS
Suffix code
Ø
250
300
architectural
Luminaire
IAA
kg
1x100
3.1
1x150
4.1
FSM-E
1x18
3.4
1x26
3.2
1x26
4.3
1x26
5.0
1x32
4.5
1x32
5.0
1x32
6.6
1x32
7.8
1x42
6.6
1x42
7.6
system
Installation
Two point suspension, c/c 70 mm.
Connection
Snap-in terminal block 3x2.5 mm²,
Luminaire for light control (HF-dim)
are supplied with snap-in terminal
block 5x2.5 mm².
Design
Ceiling cup of white ABS-plastic or
specular metal. Luminaire fitting in
white (RAL 9003) or chrome plated
metal and frosted opal glass globe.
Supplied with fabric cord.
Ø 250–300 mm: 2.0 m.
Ø 350–450 mm: 2.5 m.
Miscellaneous
A cut-out in the ceiling cup is made
using cutters 94248 for a surface
mounted mains cable.
pendant/surface
523
Avion 50
523
PENDANTS
Beta, Lamell
Luminaire, incl. end caps
FDH
kg
Beta
1x25/28 6.5
1x32/35 8.0
1x45/49 8.0
1x50/54 6.5
2x25/28 6.5
2x32/35 8.0
2x45/49 8.0
2x50/54 6.5
Lamell
1x25/28 6.5
1x32/35 8.0
1x45/49 8.0
1x50/54 6.5
2x25/28 6.5
2x32/35 8.0
2x45/49 8.0
2x50/54 6.5
29141
29142
29143
29144
29146
29147
29148
29149
29171
29172
29173
29174
29176
29177
29178
29179
■
■
■
■
■ ●
■ ●
■
■
Luminaire, continuous mounted excl. end caps
FDH
kg
White/black Grey/white
Beta
1x25/28 6.4
29241
29251
1x32/35 8.0
29242
29252
1x45/49 8.0
29243
29253
1x50/54 6.4
29244
29254
2x25/28 6.4
29246
29256
2x32/35 8.0
29247
29257
2x45/49 8.0
29248
29258
2x50/54 6.4
29249
29259
29121
29122
29123
29124
29126
29127
29128
29129
29151
29152
29153
29154
29156
29157
29158
29159
■
■
■
■
■ ●
■ ●
■
■
■
■
■
●
●
●
●
White/black Grey/white
■
■
■
■
■
■
■
■
Suffix code
-300 SwitchDim/DSI
-301 SwitchDim with pull dim
-368 DALI
-217 e-Sense ActiLume with pull dim
-218 e-Sense SmartSwitch absence control
-219 e-Sense SmartSwitch on/off
-220 e-Sense SmartSwitch with pull dim
Add suffix code to the end of the luminaire part number to indicate required function. Only one suffix can be added.
1x32/35 W, Beta
2x32/35 W, Beta
W
25/28
32/35
45/49
50/54
D¹
1200
1500
1500
1200
1x32/35 W, Lamell
D²
1275
1575
1575
1275
D³
1350
1650
1650
1350
D⁴
1330
1630
1630
1330
D⁵
1460
1760
1760
1460
A continuous coupler is available as an
accessory.
2x32/35 W, Lamell
D⁶
1335
1635
1635
1335
Installation
Wire suspension. Friction locks
included with luminaire. Balanced.
Connection
Single – the luminaire is equipped
with a 2.4 m mains cable
3x0.75 mm² and an earthed plug as
standard. Luminaires ordered with
SwitchDim or DALI are equipped
with with 2.4 m mains cable
5x0.75 mm² excl. plug.
Continuous installation – 5-way
snap-in terminal block at each
end and through-wiring cable
3x1.5 mm² as standard. With dimming, 5-way snap-in terminal block,
Design
Body in extruded aluminium and
end caps in cast aluminium. The
luminaire is finished in a white/
black (RAL 9003 structured/RAL
9005) or alu-grey/white (RAL 9006
structured/ RAL 9003) design. The
top cover is transparent acrylic
plastic. Luminaires for continuous
installation require end caps – must
be ordered separately.
Louvre
Beta – double parabolic reflector
louvre with side and cross-blades of
satin matt, metallised aluminium
with very good reflection characteristics (> 92 %), integrated into a
single unit.
Lamell – alu-grey enamelled sheet
steel, cross-blade louvre.
Reflector
Reflector material of metallised aluminium with satin matt surface.
Accessories
Assembly fittings and supplementary components, see accessories.
D⁶
D¹
D²
D³
52
206
D⁴
D⁵
The removable end caps partially conceal the friction lock from view.
10
14
www.fagerhult.com
Closs Beta
523
Suffix code
White
26645
26646
26647
26648
26655
26656
26653
26654
26657
26658
Alu grey
26665
26666
26667
26668
26675
26676
26673
26674
26677
26678
■ ●
■ -368 DALI
■ ●
● -309 e-Sense SmartSwitch absence control
■ ●
● -314 e-Sense SmartSwitch on/off
■ ●
■
■
■ ●
■
■ ●
Accessories
Wire suspension L=1.5 m, small ceiling cup/pair
Wire suspension L=1.5 m, small ceiling cup for T-bars 25 mm/pair
Wire suspension set, large ceiling cups, single wire, pendant cable, L=1.0 m
Wire suspension set, large ceiling cups, single wire, pendant cable 5-way, L=1.0 m
Wire suspension set, large ceiling cups for T-bars 25 mm, single wire, pendant cable, L=1.0 m
Wire suspension set, large ceiling cups for T-bars 25 mm, single wire, pendant cable 5-way, L=1.0 m
Continuous connector
Opal diffuser
1-lamp
W
25/28
32/35
50/54
45/49
73/80
White
94481
94483
94485
94501
94487
94503
91969
25/28/50/54W
94191
B
125
125
125
125
125
Alu grey
94482
94484
94486
94502
94488
94504
91970
32/35/45/49W
94193
The luminaire has extremely compact
dimensions. This has been achieved by
rationally utilising components and
production resources.
2-lamp
A
1217
1517
1217
1517
1517
PENDANTS
Luminaire
FDH
kg
1x25/28 3.2
2x25/28 3.3
1x32/35 3.9
2x32/35 4.0
1x45/49 3.9
2x45/49 4.0
1x50/54 3.2
2x50/54 3.3
1x73/80 3.9
2x73/80 4.0
Installation
Wire suspension via wire lock
secured directly on the luminaire.
Balanced.
Connection
Two Ø 19 mm cable entries fitted
with blanking grommets on the
top of the luminaire, see dimension
chart. 3-way snap-in terminal block
at each end. Luminaires for dimming, 5-way snap-in terminal block,
Design
Luminaire body in sheet steel and
end caps of die-cast aluminium in a
white (RAL 9016 structured) or alu
grey (RAL 9006 structured) finish.
Louvre
louvre with side and cross blades of
satin matt metallised aluminium
with excellent reflection characteristics (> 92 %), integrated into
a single unit. The louvre remains
attached when lowered. Earthed.
Reflector
The louvre acts as a reflector.
Dimming
Most models can also be equipped
with other ballasts for dimming.
Emergency lighting
Some variants are available with
emLED. emLED is placed in the
first louvre cell. A 300 mm blank
module is required for conventional
emergency for housing the battery
and invertor.
pendant/surface
Direct/Indirect
C
55
55
55
55
55
D1
1200
1500
1200
1500
1500
D2
1208
1508
1208
1508
1508
D3
1217
1517
1217
1517
1517
D1
C
A
B
D2
D3
www.fagerhult.com
Closs can be continuously mounted
via a coupler. Please note that the
luminaire is delivered without throughwiring.
41
11
DTI type 2
523
PENDANTS
Luminaire
FDH
kg
1-cell luminaire
1x25/28 2.8
2x25/28 2.8
1x32/35 3.0
2x32/35 3.0
1x45/49 3.0
2x45/49 3.0
1x50/54 2.8
2x50/54 2.8
1x73/80 3.0
2x73/80 3.0
2-cell luminaire
2x25/28 3.1
2x32/35 3.3
Light dist.
50/50
50/50
50/50
50/50
50/50
50/50
50/50
50/50
50/50
50/50
50/50
50/50
28821
28822
28823
28824
28829
28830
28825
28826
28827
28828
■ ●
28838
28839
■ ●
■ ●
■ ●
■ ●
■
■
■
■
■
Continuous installation excl. end caps
FDH
kg
Light dist.
1-cell luminaire
50/50
1x25/28 2.8
50/50
2x25/28 2.8
50/50
1x32/35 3.0
50/50
2x32/35 3.0
50/50
1x50/54 2.8
50/50
2x50/54 2.8
50/50
1x73/80 3.0
50/50
2x73/80 3.0
29901
29902
29903
29904
29905
29906
29907
29908
■
■
■
■
■
■
■
Couplers and end caps are required for continuous installation
and are ordered separately, see accessories page 59.
■ ●
Suffix code
■ -301 SwitchDim with pull dim
■ -368 DALI
● -308 e-Sense ActiLume with pull dim
● -315 e-Sense SmartSwitch with pull dim
1x32/35 W, 1-cell
2x32/35 W, 1-cell
W
25/28
32/35
45/49
50/54
73/80
12
DTI with SwitchDim (-301) has a pull
switch for dimming. HF-std luminaires
are available on special order.
2x32/35 W, 2-cell
A
1365
1665
1665
1365
1665
B
141
141
141
141
141
C
58
58
58
58
58
D
1200
1500
1500
1200
1500
25/28 1365
32/35 1665
229
229
66
66
1200
1500
Installation
Wire suspension via friction locks
on the luminaire. Wire suspension
ordered separately, see accessories.
Connection
Single – connections are made at
the end of the luminaire and are
concealed by the end-plate. 5-way
snap-in terminal block at one end.
Continuous installation – 5-way
snap-in terminal block at each end
and through-wiring cable 3x1.5 mm²
as standard. With dimming, 5-way
snap-in terminal block, 1-phase
through-wiring possible.
Design
Body of enamelled sheet steel with
white (RAL 9016) finish. End-plates
of polypropylene plastic. When
continuous installation is required
the luminaire is supplemented with
continuous couplers and end-plates;
see accessories.
Louvre
louvre with satin matt metallised
aluminium side and cross-blades
with excellent reflection characteristics (> 92 %), integrated into a
single unit. Re-lamping is performed
from the top, without removing the
louvre. Earthed.
Reflector
The louvre acts as a reflector.
Light distribution
Symmetrical.
Dimming
Emergency lighting
Some models are available with
emLED positioned in the first cell on
the louvre. Read more about emLED
in the Emergency Lighting chapter.
Accessories
Installation accessories, see page 59.
82
C
B
D
A
www.fagerhult.com
DTI with double louvre cells conforms to
the requirements set out in EN 12464-1.
55
pendant/surface
Beta
523
Pozzo
Pendant
Luminaire
FCH
kg
1x40
4.7
1x55
4.7
1x60
6.0
PENDANTS
Installation
Two point suspension c/c 53–78 mm.
Connection
or 5x2.5 mm² when dimming.
Surface mounted mains cable possible. Height adjustment is done on
the luminaire using a friction lock.
Design
Luminaire of deep drawn aluminium. White structured finish
(RAL 9016). Opal acrylic diffuser.
Supplied with 2 m wire, 2.3 m white
fabric cord and white steel ceiling
cup.
Designed by
Örjan Nilsson, Yellon.
Suffix code
Ø
450
450
550
56850
56851
56852
● -368 DALI
■ ●
●
required function. Only one suffix can be added.
Light source
W
Socket
830
840
40
2GX13
81393 81566
55
2GX13
81312 81567
60
2GX13
81397 81568
Slightly curved, sealed top with integrated friction locks.
148
W
1x40 FCH
1x55 FCH
1x60 FCH
Ø1
450
450
550
Ø2
490
490
590
100
Ø1
Ø2
352
www.fagerhult.com
Ceiling cup support a ceiling slope of
0–20°. Knockouts in the ceiling cup for
surface mounted cable.
13
Loop Light Wall
523
Diffused
CEILING/WALL
Installation
Wall installation.
Connection
Connection is made at one end, 
from the outside. Installation is concealed by the end cap. Cable entry 
in the centre of the wall bracket, see 
dimension chart.
Design
Luminaire body of extruded aluminium with cast metal ends. Wall 
bracket of sheet steel. White (RAL 
9016)  enamelled finish. 
Reflector
Metallised aluminium reflector. 
Slightly asymmetrical indirect light 
distribution.
Dimming
Most models can also be equipped 
with other ballasts for dimming.
Luminaire excl. end caps
FDH
kg
1x25/28 4.4
1x25/28/32/35 W
Accessories
White
19632-1922
■
kg
End cap/each
0.2
Continuous mouting coupler/each 0.1
White
91894
91896
2x25/28/32/35 W
Alu grey
91895
91897
Loop Light Wall is suitable for continuous mounting.
W
A
B
C
D
25/28
32/35
1315
1615
165
165
57
57
1100
1400
+
+
D
C
B
A
The wall bracket is fixed and the cable
is connected.
14
72
www.fagerhult.com
15
Selene
CEILING/WALL
523
Suffix code
Luminaire
FDH
■ -80 1–10 V on the uplight
Without
outlet sockets
Uplight/downlight
1x25/28+1x13/14
1x25/28+1x21
1x32/35+1x13/14
1x32/35+1x21
required function.
17560
17561
17562
17563
■
■
■
■
Accessories
Louvre for downlight, 13/14 W
Louvre for downlight, 21 W
Wall bracket  
Decor strip, red
Decor strip, green 
Decor strip, blue
Decor strip, dark grey
Decor strip, light grey
Decor strip, White
95319
95329
95339
90550
90551
90552
90553
90554
90555
1x13/14/25/28 W
W
A
B
1⊗25/28/1⊗13/14
1⊗25/28/1⊗21
1⊗32/35/1⊗13/14
1⊗32/35/1⊗21
1366
1666
1666
1666
230
230
230
230
C
105
105
105
105
D
950
950
950
950
B
A
C
D
16
136
www.fagerhult.com
Installation
For wall installation, ideally above 
bed. A bracket is fixed to the wall 
with the luminaire locked in position via screws.
Connection
Connection to 5-way terminal block 
via a conduit outlet in the wall. 
Hole in the centre of the luminaire. 
Cables for low current (tele, data, 
etc.) are connected directly to the 
equipment box via the conduit box 
in the wall.
Design
Body of white enamelled extruded 
aluminium. End caps of cast aluminium. The top of the luminaire 
and the opening for the downlight 
are covered by a transparent acrylic 
plastic diffuser. The luminaire is fitted with a pull switch for controlling 
the down light.
Reflector
Asymmetrical reflector that directs 
the uplight upwards/outwards 
towards the ceiling. Reflector for the 
down light directs the light asymmetrically downwards/outwards 
across the bed.
Accessories
Cross blade louvre for the down 
light. Recommended in 2 patient 
rooms.
Miscellaneous
The luminaire can be ordered with 
dimming on the uplight, supplement the order number with the 
required suffix. Selene can be 
equipped with a décor strip that is 
placed in the slot on the front of the 
luminaire, see accessories. 
523
Vidi 1
Luminaire
FDH
1⊗13/14
1⊗21
1⊗20/24
1⊗25/28
1⊗32/35
1⊗45/49
1⊗50/54
CEILING/WALL
Installation
Mounted in the meeting between
the wall and the ceiling.
Connection
Cable entry at each end and double
entry in the middle of the fixture.
5-pin quick connect terminals
located in the luminaire centre to
allow for through wiring.
Design
Diffuser Frame with sides of
extruded aluminum and cast-metal
ends. Luminaire body of aluzinc. The
luminaire is finished in plain white
(RAL 9016).
Diffuser
Line Prism in PMMA.
Reflector
White painted steel.
Other
Suffix -299 DALI includes corridor
function.
Suffix Code
kg
1.8
2.5
1.8
3.2
3.8
3.8
3.2
17330
17331
17332
17333
17334
17335
17336
■
■ -299 DALI
■ -300 DSI/switchDIM
■
■
■
■
■
■
Knockout at the end to allow for cable
entry.
1⊗32/35
W
13/14/20/24
21
25/28/50/54
32/35/45/49
A
593
893
1193
1493
B
430
730
1030
1330
77
120
88
B
A
The lined diffuser is designed to
distribute the light on the ceiling and
wall.
17
CEILING/WALL
523
Luminaire
FDH
1⊗13/14
1⊗20/24
1⊗25/28
1⊗32/35
1⊗45/49
1⊗50/54
Installation
For surface mounted installation.
Can be installed on solid ceilings or
ceilings with visible T-bars.
Connection
entry in the fixture in the middle.
5-pin quick connect terminals located in the luminaire centre to allow
for through wiring.
Design
(RAL 9016).
Diffuser
Line Prism in PMMA.
Reflector
Dimming
function.
Suffix Code
kg
2.2
2.2
3.7
4.8
4.8
3.7
17340
17341
17342
17343
17344
17345
Vidi 2
■ -299 DALI
■
● -367 e-Sense ActiLume master luminaire
Enter additional number of selected fixtures for the desired function. Only one additional code as possible.
■
■ ●
■ ●
■ ●
Accessories
Bracket for mounting in the visible T-bars
■ ●
91105
Vidi 2 can be fitted with Fagerhults
system of sensors - e-Sense.
1⊗32/35
B
A
W
13/14/20/24
25/28/50/54
32/35/45/49
25/28/50/54 e-Sense
32/35/45/49 e-Sense
18
A
470
1050
1350
1050
1350
B
600
1200
1500
1220
1520
61
171
Accessory 91105 is used when installed
in visible t-bars.
523
Vidi 3
Luminaire
FDH
1⊗13/14
1⊗25/28
CEILING/WALL
Installation
For mounting horizontally or
vertically on the wall.
Connection
entry in the fixture in the middle.
5-pin quick connect terminals
located in the luminaire center to
allow for through wiring.
Design
(RAL 9016).
Diffuser
Line Prism in opal PMMA.
Reflector
Dimming
function.
Suffix Code
kg
2.2
3.7
17350
17351
■ -299 DALI
■
Enter additional number of selected fixtures for the desired function. Only one additional code as possible.
■
Knockouts at each end allow
connection using surface mounted
cables.
1⊗25/28
B
A
W
13/14
25/28
A
470
1050
B
600
1200
61
171
Luminaire line prism is opal to eliminate glare.
19
Closs Beta
523
CEILING / WALL
Direct
Suffix code
Luminaire
FDH
kg
1x25/28 3.3
2x25/28 3.4
1x32/35 4.0
2x32/35 4.1
1x45/49 4.0
2x45/49 4.1
1x50/54 3.3
2x50/54 3.4
1x73/80 4.0
White
26605
26606
26607
26608
26615
26616
26613
26614
26617
Alu grey
26625
26626
26627
26628
26635
26636
26633
26634
26637
■ ●
■ -368 DALI
■ ●
■ ●
■ ●
■
■
■ ●
■
■ ●
Accessories
White
94481
94483
94308
94310
91969
91972
Wire suspension L=1.5 m with small ceiling cups/pair
Wire suspension L=1.5 m with small ceiling cups/pair for T-bars.
Wire suspension set, large ceiling cups, single wire, pendant cable L=2.0 m.
Wire suspension set, large ceiling cups for T-bars 25 mm, single wire, pendant cable L=2.0 m.
Continuous connector
Balance weight for pendant luminaire
1-lamp
W
25/28
32/35
50/54
45/49
73/80
The louvre is earthed and is fitted in the
length of the luminaire. This function
simplifies installation and cleaning.
2-lamp
A
1217
1517
1217
1517
1517
B
125
125
125
125
125
Alu grey
94482
94484
94309
94311
91970
Installation
Surface mounted, or wire suspension via a wire lock secured directly
on the luminaire. Luminaires for
wire suspension need a counterbalance (wire suspension and counter
balance ordered separately).
Connection
Three Ø 19 mm cable entries fitted
with blanking grommets on the
top of the luminaire, see dimension chart. Knockouts at each end
for surface mounted mains cable.
3-way snap-in terminal block in the
centre of the luminaire. Luminaires
for dimming, 5-way snap-in terminal block, 1-phase through-wiring
possible.
Design
Luminaire body in sheet steel and
end caps of die-cast aluminium in a
white (RAL 9016 structured) or alu
grey (RAL 9006 structured) finish.
Louvre
louvre with satin matt metallised
aluminium side and cross blades,
with excellent reflection characteristics (> 92 %), integrated into
a single unit. The louvre remains
attached when lowered. Earthed.
Reflector
The louvre acts as a reflector. The
luminaire is also fitted with a top
reflector.
Emergency lighting
Some variants are available with
emLED. emLED is placed in the
first louvre cell. A 300 mm blank
module is required for conventional
emergency for housing the battery
and invertor.
Dimming
Most models can on request be
equipped with other ballasts for
dimming.
C
55
55
55
55
55
D1
1130/1200
1430/1500
1130/1200
1430/1500
1430/1500
D2
1208
1508
1208
1508
1508
D3
1217
1517
1217
1517
1517
D1
C
A
B
D2
D3
Closs with e-Sense; the sensor unit is
placed in the luminaire body.
40
20
www.fagerhult.com
Teres Edge
523
Ceiling
Alu grey
56656
56657
Specular metal
56685
56686 ■
56584
56582
56585
56683
56680
56684
-357
-359 Microwave sensor absence dampening
-
Light source
W
Socket
■
56583
56586
56681
56682
22
40
60
56588
56687
24
36
56587
56589
56688
56689
830
840
81391
81393
81397
81565
81566
81568
81158
81159
81301
81471
absence dampening 10–100 %.
Miscellaneous
Shades with bayonet fitting. Edge
ring is attached to the lower diffuser. The luminaire is equipped
with HF-ballast.
Designed by
Olle Lundberg.
Compact fluorescent lamp FSQ-E
13
G24q-1
81221 81439
18
G24q-2
81222 81435
■
Teres Edge
2GX13
2GX13
2GX13
Compact fluorescent lamp FSD
2G11
2G11
CEILING / WALL
Luminaire
Luminaire with direct distribution
FSD
kg
Ø
Lum. class
2x24
2.9 523
B
3x24
2.9 523
B
FSQ-E
2x13
2.4 423
C
1x18
1.3 323
D
2x18
3.0 423
D
FCH
1x22
1.3 323
D
1x40
2.4 423
D
Round beam luminaire
FCH
1x60
4.8 640
B
FSD
4x24
4.8 640
D
4x36
7.4 820
C
Installation
Two securing holes, c/c 70 mm.
Ø 323–523 mm also on wall.
Connection
on Ø 323–523 mm and snap-in
terminal block 4x2.5 mm² on
Ø 640–820 mm, 1-phase throughwiring possible. Luminaires for dimming, 5-way snap-in terminal block,
Cable entry from on top of the luminaire. Surface mounted mains cable
possible, through-wiring 180°.
Design
Luminaire body and edge ring in
alu-grey aluminium (RAL 9006) or
body in white enamelled aluminium
(RAL 9003 structured) and edge ring
in specular aluminium. Shade of
matt opal acrylic. Solid design that
prevents particles from collecting in
44.
Ø 640–820 mm, IP 20.
Dimming
e-Sense – with concealed micro-
Ø2
H
Ø1
Ø1
323
423
523
640
820
382
Ø2
152
165
240
183
183
H
112
130
145
196
228
Teres Ø 300/400/500.
www.fagerhult.com
21
Discovery Space
56625
56626
56602
56606
56603
56607
56604
56608
Accessories
Recess brackets, 4 pcs
Diffuser lock/10 pcs. 1 (per luminaire)
Decor casing, grey
Decor casing, white
Decor ring, grey
Decor ring, white
Robust case gives IP 65, white (IK10 with PC-diffuser)
● ■
●
56607-218
Light source
W
Socket
830
Compact fluorescent lamp FSQ-I
13
G24d-1
81255
18
G24d-2
81256
26
G24d-3
81257
56665
56666
56623
13
18
26
56624
22
G24q-1
81221
G24q-2
81222
G24q-3
81223
2GX13
835
94605
93889
93372
93371
93374
93373
93381
840
81465
81466
81439
81435
81436
81391
Compact fluorescent lamp FSS-E
28
GR10q
81364
Ø 345
91
111
63
Ø 384
Ø 384
Robust
124
Ø 414
www.fagerhult.com
22
Recessed brackets facilitates easy installation in fixed or suspended ceilings.
395
pendant/surface
recessed
system
industrial
■ -359 Microwave sensor absence dampening
56601
56605
downlights
Suffix code
● -357 Microwave sensor on/off
spotlights
Luminaire with HF-std
FCH
kg
Lum. class Diffuser
1x22
1.9
B
Acrylic
1x22
1.9
B
PC
FSS-E
1x28
2.0
C
Acrylic
1x28
2.0
B
PC
FSQ-E
2x13
1.9
B
Acrylic
2x13
1.9
B
PC
2x18
1.9
B
Acrylic
2x18
1.9
B
PC
2x26
2.0
C
Acrylic
2x26
2.0
C
PC
e-Sense SmartSwitch absence dampening
2x18
1.9
B
PC
e-Sense SmartSwitch on/off
2x18
1.9
B
PC
2x26
2.0
C
PC
Emergency lighting with self-test
FSS-E
1x28
2.8
PC
Emergency lighting without self-test
1x28
2.8
PC
Installation
Four fixing holes. Surface mounted
or semi-recessed on ceilings or
walls. For recessed installation,
order recess brackets separately.
Connection
Surface mounted mains cable
possible, through-wiring 0° or 180°.
Three Ø 16 mm cable entries fitted
with blanking grommets on the top
of the luminaire.
Design
Polycarbonate luminaire body and
impact resistant acrylic or polycarbonate diffuser.
Emergency lighting
Emergency luminaires have a
built-in battery (3 hr) and emergency unit. Snap-in terminal block
4x2.5 mm².
Dimming
e-Sense SmartSwitch – luminaire
with integrated sensor for presence
detection on/off. Detection area
100°.
e-Sense SmartSwitch absence dampening – luminaire with integrated
SmartSwitch sensor for absence
dampening 100–10 %. Detection
area 100°. For more information, see
Technical Information under Dimming. Please note; luminaires with
sensor are IP 20 rated.
Accessories
Trim ring and outer casing in white
or grey (RAL 9006) aluminium. Robust case of cast aluminium. An aluminium ring seals tight against the
ceiling or wall. Four security screws
(tamper-proof torx) IP 65. IK 10 in
PC. Robust case is not suitable for
2x26 W version. IK - International
classification for mechanical protection; IK 10 = highest class. Max
2x18 W with decor casing.
Miscellaneous
Surface mounted cables possible,
spacing 0° or 180°. Three Ø 16 mm
cable entries fitted with blanking
grommets on the top of the luminaire.
Designed by
Wilma Daemen.
architectural
CEILING / WALL
523
LUNA
Wall and ceiling lights
CEILING / WALL
73
Luna has a pleasing appearance and
provides high visual comfort with a soft,
pleasant lighting effect. Backlight on to the
surrounding wall or ceiling further enhances
the ambience of the area.
Available with T5 circular fluorescent lamps
which provide even luminance over the entire
diffuser area. The dense opal acrylic diffuser
provides excellent lamp obscuration with the
absence of ‘hot spots’.
Ceiling mounted
The luminaire is also fully gasketted
to prevent the ingress of insects and
contaminants. Luna has hidden latches for
positive diffuser retention whether wall or
ceiling mounted.
142
106
Fully tested for thermals and photometric
performance, Luna is suitable for both
residential and commercial applications.
A
300/400
71
35
Applications include residential nursing
homes, breakout areas, stairwells,
hospitals, rest rooms, schools, bedrooms
and corridors.
B
110
1
PRODUCT CODE
LIGHT SOURCE/DESCRIPTION
(NOM) DIMENSIONS
A
B
C
CUTOUT
LUNA
EL-LUN-122-100-___
1 x 22W T5c
300
110
EL-LUN-140-100-___
1 x 40W T5c
400
110
EL-LUN-155-100-___
1 x 55W T5c
400
110
VARIATION
SUFFIX
Standard
-000
DSI/STD terminal block
-100
DALI/STD terminal block
-200
Standard/Fused terminal block
-400
DSI/Fused terminal block
-500
DALI/Fused terminal block
-600
LUNA
N18226
OPTIONS
+ Ceiling or Wall mounted
+ IP44 Available (Add suffix -I)
+ Dimmable version available upon request
www.eaglelighting.com.au/luna
23
ELWOOD
WALL LIGHTS
CEILING / WALL
64
Simo que nis ma soluptaquam que vent
eosam ni nos parum quistotasped quia quat
ut faccae que ipsuntur, arunt ventore re
dolupta ducitatur, tet, sitate verio corestia
corate poreprae et ea consequo et reptis
derum dolorectum repuda velest, optate nist
ra velitatur, ellut laborepudis voloritatem
doloria mentur? Agnatem renim labore nate
nulluptatur accuptatur ant.
Fugit officiis est, autet aut unti incias sunt
il iunt volor alignia veni aut lam audit aces
eosam ipsa ne magnam aut quam voluptatia
ati cor moloris prerunt otaeribus, eum explat.
B
A
Dolupta turibus sumetur?
C
B
Totatus est repero cuptasp idebis aboraturio
dignimo luptat im faceperferae auditatur, nim
quo iliquunt quatecum nemosse nestiost,
core et quiberum id mi, cuptatu resequiam
quatiis es accus, nis dolor a autatur aut
ent quatur rectotatur, cusant officiende vel
imagnimp
C
ELWOOD
A
N18226
PRODUCT CODE
(NOM) DIMENSIONS
A
B
175
350
C
CUTOUT
ELWOOD
EL-ELW-118-100-___
1x18W TC-DE (HF) Satin Matt Glass
24
100
www.eaglelighting.com.au/elwood
VARIATION
SUFFIX
Standard
-000
-100
-200
1-10V/STD terminal block
-300
-400
-500
-600
1-10V/Fused terminal block
-700
BELLS BED
WALL LIGHTS
CEILING / WALL
60
Bells Bed is designed as an elongated
luminaire that can provide both soft lighting
and a general reading light.
Suitable for over bed applications, it comes
with the choice of either matt opal glass or
white acrylic.
Suitable for Aged Care, Hospitals, Schools
and vanity mirrors.
Frosted glass accessory
Side view
B
GECKO IP44
C
A
N18226
PRODUCT CODE
(NOM) DIMENSIONS
A
B
C
CUTOUT
BELLS BED
VARIATION
SUFFIX
Standard
-000
-100
EL-BEL-114-100-___
1x14W T5 Satin Matt Glass
680
125
90
-200
EL-BEL-114-101-___
1x14W T5 White Acrylic
680
125
90
-300
EL-BEL-124-100-___
1x 24W T5 Satin Matt Glass
680
125
90
-400
EL-BEL-124-101-___
1x 24W T5 White Acrylic
680
125
90
-500
-600
-700
www.eaglelighting.com.au/bellsbed
25
EDEN
WALL LIGHTS
CEILING / WALL
63
quatiis es accus, nis dolor a autatur aut ent
quatur rectotatur, cusant officiende
B
EDEN
C
A
N18226
PRODUCT CODE
(NOM) DIMENSIONS
A
B
C
EDEN
EL-EDN-118-100-___
340
190
100
EL-EDN-118-101-___
1x18W TC-DE (HF) White Acrylic
340
190
100
EL-EDN-218-100-___
340
250
110
EL-EDN-218-101-___
340
250
110
26
www.eaglelighting.com.au/eden
CUTOUT
VARIATION
SUFFIX
Standard
-000
-100
-200
-300
-400
-500
-600
-700
BELLS
WALL LIGHTS
CEILING / WALL
61
B
OPTIONS
+ Dementia wire guard
A
BELLS
C
N18226
PRODUCT CODE
(NOM) DIMENSIONS
A
B
C
CUTOUT
BELLS
EL-BEL-118-100-___
340
125
95
EL-BEL-118-101-___
340
125
95
EL-BEL-126-100-___
340
125
95
EL-BEL-126-101-___
340
125
95
www.eaglelighting.com.au/bells
VARIATION
SUFFIX
Standard
-000
-100
-200
-300
-400
-500
-600
-700
27
Telescope Aqua
523
CEILING / WALL
Installation
Horizontal or vertical on a wall or
ceiling. Protection class IP 44.
Connection
Snap-in terminal block 3x1,5mm².
possible.
Design
White body of extruded aluminium
(RAL9016). White wall bracket
in aluminium zinc-plated sheet
(RAL9016). Opal acrylic diffuser.
Ends in matt white plastic, attached
by means of a magnet.
Luminaire
FDH
1x13/14
1x21
1x25/28
kg
1.0
1.3
1.5
Lum. class
B
B
B
17380
17381
17382
W
Socket
13
G5
25
G5
830
840
81625
81629
81626
81630
Light source
W
Socket
827
830
840
21
G5
81354 81353 81348
A
W
1⊗13/14
1⊗21
1⊗25/28
A
600
900
1200
B
400
400
400
C
348
348
348
B
87
72
C
Ends secured with magnets. Facilitating
easy re-lamping without tools.
28
134
www.fagerhult.com
523
Aqua
Installation
Horizontally or vertically mounted
on a wall. Protection classification
IP 44.
Connection
Cable entries for recessed and
surface mounted installation fitted
with blanking grommets. Positioning see dimension chart. 3-way
terminal block.
Design
Body of white or grey finished polycarbonate.
Louvre
Luminaire
FDH
kg
Lum. class
Without outlet socket
1x13/14
0.8
B
1x20/24
0.8
C
With e-Sense SmartSwitch
1x13/14
0.8
B
Accessories
White
Grey
17877
17879
17878
17880
94477
CEILING / WALL
without the use of tools.
Dimming
Available with integrated e-Sense
SmartSwitch sensor for occupancy
sensor can power a further 1 luminaire. Note: IP 21 with sensor.
W
Socket
830
840
13
G5
81625 81626
20
G5
81627 81628
17885
179
+
38
410
610
682
58
610
682
92
catch.
www.fagerhult.com
135
29
Sektor T5
CEILING / WALL
523
Luminaire
FDH
1x21
1x25/28
1x32/35
Suffix code
kg
1.9
2.4
2.9
17401
17402
17403
■
■ -368 DALI
■
■
Installation
For ceiling or wall mounting.
Normally installed at the junction
between the ceiling and wall.
Connection
Cable entry at both ends, double
entry in the middle towards the wall
or ceiling. Fitted as standard with
a 5-way snap-in terminal block in
the centre. Luminaires for dimming,
Knock out at each end.
Design
Luminaire body and louvre in
enamelled sheet steel and ends
in die-cast aluminium (RAL 9016
structured). Asymmetrical light distribution for direct lighting and light
opening (cross-blade louvre) on the
front lighting the ceiling and wall.
louvre
Lamell – white enamelled crossblade louvre with perforated front
integrated into a single unit (finish
as above).
Reflector
Metallised reflector with excellent
reflection characteristics (> 92 %)
with slightly asymmetrical function,
see polar diagram.
Dimming
Miscellaneous
The luminaire can on request be
equipped with through-wiring (3way or 5-way) and block in the end
caps and/or HF-ballast for dimming.
1x21/25/28/32/35 W
W
A
21
887
25/28 1187
32/35 1487
B
95
95
95
C
76
76
76
D
800
1100
1400
D
C
B
A
The perforated front means that the
whole surface of the luminaire is
illuminated; creating a soft gradient
between the luminaire and its closest
surroundings.
30
132
www.fagerhult.com
CEILING / WALL
31
Wall 2, Wall LED
CEILING / WALL
523
Suffix code
Luminaire
HDG
kg
1x150 2.0
Length
250
Luminaire with Electronic ballast
MT
kg
Length
1x35
2.0
250
1x70
3.0
300
FSQ-E
kg
Length
1x26
2.0
250
FSM-E
1x32
3.0
300
1x42
3.0
300
Luminaire with LED
LED
kg
Length
6
0.8
150
1x32/42 W, FSM-E
Alu grey
64447
White
64444
64454
Alu grey
64445
64455
White
64440
Alu grey
64441 ■
64450
64452
64451
64453
White
64430
required function.
Accessories
Dust cover for 1x26 W FSQ-E
Dust cover for 1x32/42 W FSM-E
Light source
W
Socket
Metal halogen MT
35
G12
70
G12
Halogen 230 V HDG
150
R7s
■
26
Alu grey
64431
E
D
32
827
830
840
81386
81384
81488
G24q-3
81223
81436
Compact fluorescent lamp FSM-E
32
GX24q-3
81329 81477
42
GX24q-4
81331 81478
B
C
94978
94979
6 W, LED, 164 lm
1x70 W, MT
A
White
64446
Installation
Wall 2 – 4 securing holes.
Wall LED – 2 securing holes. Suitable for installation over a wall
patress. Downward light opening
has an IP 44 rating.
Connection
Wall 2 – snap-in terminal block
5x2.5 mm². 1-phase through-wiring
possible with recessed cable. Central, surface-mounted mains cable
possible from above, no onward
connector.
Wall LED – connected with a 230 V,
integrated drive unit. Snap-in
terminal block 3x1.5 mm². 1-phase
through-wiring possible. Surface
mounted mains cable not possible.
Design
Luminaire body in structured white
(RAL 9016) or structured grey (RAL
9006) sheet metal. Luminaire for
MT and HDG has partially blasted
protective glass.
Reflector
Asymmetrical reflector made
of structured aluminium with
excellent reflection characteristics
(> 92 %).
Miscellaneous
Wall LED – colour temperature
3000 K.
Designed by
Claesson Koivisto Rune.
Corridor width 2 m, luminaire height
0.5 m, luminaire c/c spacing 3 m.
W
FSM-E
1x32, 42
A
B
C
D
E
300 109 282 250 235
FSQ-E
1x26
250 92
235 200 189
MT
1x35
1x70
HDG
1x150
250 92
235
200 189
LED
150 55
141
106
250 92 285 200 189
300 109 282 250 235
Wall LED with its downward directed
light has enclosure class IP 44.
LED WL
523
Luminaire
LED
1.2
1.2
Colour temp.
Warm white 3200 K
Cold white 6500 K
Accessories
Recess box
Driver 350 mA, including Lynx cabling with the
possibility to connect 2 luminaires.
64470
64471
CEILING / WALL
Installation
Luminaire for recessed mounting
in the wall. Assembly springs for
quick assembly, without tools, are
supplied as standard.
Design
Luminaire in matt anodised aluminium. Assembly springs of spring
steel. 30 cm free cable fitted with
snap-in connector for the Lyte system (the connector must be cut off
when connecting to another driver).
Miscellaneous
High power LED with warm white
3200 K or cold white 6500 K
colour temperature. IP 20. Separate
350 mA constant current driver
required- see accessories.
91235
98007
Extension cable 1 m
98008
Recess box for LED WL.
90
90
61
37
60
82
114
117
79
10
79
85
50
LED WL is ideal for lighting stairwells.
410
www.fagerhult.com
33
523
Pozzo
Ceiling
CEILING / WALL
Installation
Securing holes for assembly on a
pattress or surface mounted.
Protection class IP 44.
Connection
Snap-in terminal block 5x2.5 mm².
possible.
Design
Luminaire of deep drawn aluminium. White structured finish
(RAL 9016). Opal acrylic diffuser.
Designed by
Örjan Nilsson, Yellon.
Luminaire
FCH
kg
1x40
2.9
1x55
2.9
1x60
3.6
Suffix code
Ø
450
450
550
56855
56856
56857
● -368 DALI
■ ●
●
Light source
W
Socket
830
840
40
2GX13
81393 81566
55
2GX13
81312 81567
60
2GX13
81397 81568
W
1x40 FCH
1x55 FCH
1x60 FCH
Ø1
450
450
550
Ø2
490
490
590
90
Ø1
Ø2
Common style with Pozzo recessed.
34
380
www.fagerhult.com
523
Zoft
system
Suffix code
56922
310
310
56924
56923
B
B
■
required function.
Light source
W
Socket
14
G5
830
840
81351
81347
industrial
Height Lum. class
620
B
10
G24q-1
81304
13
G24q-1
81221 81439
18
G24q-2
81222 81435
architectural
spotlights
downlights
Luminaire
FDH
kg
1x14
2.8
FSQ-E
1x10/13 1.6
1x18
1.6
CEILING / WALL
recessed
pendant/surface
Installation
Two fixing holes.
Connection
1-phase through-wiring possible
from the rear. Surface mounted
cable possible from above.
Design
Luminaire body and rear section
of alu-grey sheet steel. Diffuser of
opal matt glass. Alu-grey (RAL 9006
structured) rear plate.
165
220
620
310
75
90
www.fagerhult.com
407
35
Liverti
523
Surface
CEILING / WALL
Installation
Securing holes for assembly on a
box or surface mounted. Protection
class IP 44.
Connection
Snap in terminal block 5x2.5 mm²,
through-wiring is possible. Cable
entry on the top of the luminaire.
Surface mounted mains cable using
the supplied accessories.
Design
Matt opal acrylic shade. Luminaire
body in white enamelled sheet
metal (RAL 9016). Decorative ring in
cast aluminium, chrome or spraypainted grey (RAL 9006 structure).
Dimming
Some models are available with
other ballasts for dimming.
e-Sense – with concealed micro-
Luminaire
FCH
kg
1x40
2.4
1x55
2.4
Lum. class Chrome
B
56711
B
56712
Grey
56731
56732
absence dampening 10–100 %.
Designed by
Jesper Design.
■
-357
-359 Microwave sensor absence dampening
Luminaire with emergency lighting
FCH
kg
Chrome
Grey
1x40
2.4
B
56711-160 56731-160
-
Accessories
Spacer for surface mounted mains cable
Light source
W
Socket
94985
830
840
40
2GX13
81393 81566
55
2GX13
81312 81567
Decor ring in grey finish.
Ø 410
130
Ø 550
Chrome decor ring in cast aluminium.
36
www.fagerhult.com
377
37
AllFive
523
CEILING / WALL
Clear
Suffix code
Luminaire
FDH
kg
1x13/14 1.3
2x13/14 1.3
1x25/28 2.2
2x25/28 2.3
1x32/35 2.6
2x32/35 2.8
1x45/49 2.6
2x45/49 2.8
1x13/14/25/28/32/
35/45/49 W
▲ -143 Through-wiring 5x1.5 mm²
33401
33402
33403
33404
33405
33406
33407
33407
2x13/14/25/28/32/
35 W
▲
▲
● -358 Microwave sensor absence dampening
▲
● ▲
▲
▲
▲
▲
2x13/14/25/28/32/
35 W + reflector sym
Accessories
Reflector 2x13/14 W
Reflector 2x25/28 W
Reflector 2x32/35/45/49 W
Spare cover clear 13/14 W
Spare cover clear 25/28 W
Spare cover clear 32/35/45/49 W
Cable wire bracket/pair
Wire suspension parallel wires/pair
Shelter bracket/pair
Ceiling bracket, flexible c/c/pair
Wall bracket, 90°, L=150 mm/each
97590
97591
97592
90310
90311
90312
91334
91162
91210
91213
91508
Installation
Surface mounted, cable wire, wire
suspension or horizontally on a wall.
Installation using the seal supplied
with the luminaire provides protection classification IP 44. Without
seals the luminaire is classified
IP 20. Single lamp luminaires are
not balanced therefore cable wire
installations should be avoided.
Connection
Four Ø 19 mm access holes with
blanking grommets on top of
the luminaire and one Ø 16 mm
knockout in each end. The centrally
positioned snap-in terminal block
5x2.5 mm² provides through-wiring.
The luminaire is also available with
5x1.5 mm² through-wiring and
snap-in terminal blocks at each end
(-143).
Design
Body in white enamelled, corrosion
resistant aluzinc (RAL 9016). End
caps of ASA plastic.
Louvre
Clear cover of extruded acrylic
plastic with prismatic underside
and lined sides.
Emergency lighting
AllFive with emLED available in
1x25/28 W and 1x32/35 W. For
further information on emLED
please refer to the Emergency
Lighting chapter. When the seal
supplied with the luminaire is used,
the protection classification is IP
23. Without seals the luminaire is
classified IP 20.
Dimming
e-Sense – with concealed microwave sensor for on/off function or
absence dampening 10–100 %. For
further information please refer to
the dimming section in the Technical Information chapter.
Accessories
A reflector of specular anodised
aluminium is available as an accessory for the 2-lamp version. Can be
installed for a symmetrical or asymmetrical light distribution.
Miscellaneous
Reflectors are available as accessories for the two lamp luminaires.
2x13/14/25/28/32/
35 W + reflector asym
13/14 W
W
1/2x13/14
1/2x25/28
1/2x32/35
1x45/49
A
622
1222
1522
1522
B
150
150
150
150
C
50
50
50
50
D
483
1083
1383
1383
D
C
B
38
232
A
www.fagerhult.com
Reflectors are available as accessories
for the two tube luminaires.
AllFive
523
1x13/14/25/28/32/
35/49 W
33411
33412
33413
33414
33415
33416
33417
33417
▲
▲
required function.
▲
▲
▲
▲
▲
▲
Accessories
Spare cover opal 13/14 W
Spare cover opal 25/28 W
Spare cover opal 32/35/45/49 W
Cable wire bracket/pair
Wire suspension parallel wires/pair
Shelter bracket/pair
Ceiling bracket, flexible c/c/pair
Wall bracket, 90°, L=150 mm/each
2x13/14/25/28/
32/35 W
90315
90316
90317
91334
91162
91210
91213
91508
Ceiling bracket for flexible c/c available
as accessories.
13/14 W
W
1/2x13/14
1/2x25/28
1/2x32/35
1x45/49
A
622
1222
1522
1522
B
150
150
150
150
C
50
50
50
50
D
483
1083
1383
1383
D
C
B
A
Installation using the supplied seal,
gives classification IP 44.
www.fagerhult.com
233
39
CEILING / WALL
recessed
system
▲ -143 Through-wiring 5x1.5 mm²
industrial
Suffix code
Luminaire
FDH
kg
1x13/14 1.3
2x13/14 1.3
1x25/28 2.2
2x25/28 2.3
1x32/35 2.6
2x32/35 2.8
1x45/49 2.6
2x45/49 2.8
Installation
Surface mounted, cable wire, wire
suspension or horizontally on a wall.
Installation using the seal supplied
with the luminaire provides protection classification IP 44. Without
seals the luminaire is classified IP
20. Single lamp luminaires are not
balanced therefore cable wire installations should be avoided.
Connection
Four Ø 19 mm access holes with
blanking grommets on top of
the luminaire and one Ø 16 mm
knockout in each end. The centrally
positioned snap-in terminal block
5x2.5 mm² provides through-wiring.
The luminaire is also available with
5x1.5 mm² through-wiring and
snap-in terminal blocks at each end
(-143).
Design
Body in white enamelled, corrosion
resistant aluzinc (RAL 9016). End
caps of ASA plastic.
Louvre
Opal cover of extruded acrylic
plastic.
Emergency lighting
AllFive with emLED available in
1x25/28 W and 1x32/35 W. For
further information on emLED
please refer to the Emergency
Lighting chapter. When the seal
supplied with the luminaire is used,
the protection classification is IP 23.
Without seals the luminaire is classified IP 20.
pendant/surface
Opal
THINLITE
direct connecting cap
A miniture strip light module utilising
a high efficient T5 fluorescent lamp
for concealed lighting applications.
powercord 1800 mm (6 feet) with plug
75
CEILING / WALL
powercord 1800 mm (6 feet)
with plug & straight connector
Thinlite is a modular fluorescent luminaire
with a highly efficient T5
fluorescent lamp.
connecting cable 150 mm (6 inch)
connecting cable 300 mm (1 feet)
It is suitable for any built-in
areas which can
hide the luminaire andconnecting
allowscable
the1200
task
mm or
(4
feet)
powercord
1800 mm (6 feet)
display areas to be illuminated.
Several fixtures can be joined together
by a unique linking system for end to end
mounting or via a connecting cable for areas
where continuous light is essential.
Linking System
Full View
Excellent technology gives off extremely low
powercord 1800 mm (6 feet)
heat that makes for perfect lighting of heatwith plug & straight connecto
sensitive items.
368
276
DSLCAP/T
A
184
92
C
connecting ca
connecting ca
connecting ca
connecting cab
connecting cab
DSLOPC230/T
Powercord 1800mm (6 feet) for TC-S1 or TC-S2)
B
1
N18226
PRODUCT CODE
(NOM) DIMENSIONS
A
B
C
CUTOUT
DSLPTC/T connecting cable 150mm (6 inch)
DSLPTC1/T connecting cable 300mm (1 feet)
FG-19787-AV
1x14W T5
578
44
30
FG-19788-AV
1x21W T5
878
44
30
FG-19789-AV
1x28W T5
1178
44
30
FG-19790-AV
1x35W T5
1478
44
30
THINLITE
THINLITE
DSLCAP/T
THINLITE ACCESSORIES
FG-96830-AV
Powercord 1800mm (6ft)
FG-96831-AV
Connecting cable 150mm SM2 (straight) type available
FG-96832-AV
FG-96832-06-AV
FG-96832-12-AV
FG-96832-18-AV
FG-96834-AV
Plastic diffuser 14W
FG-96835-AV
FG-96836-AV
FG-96837-AV
40
www.eaglelighting.com.au/thinlite
DSLOPC230/T
Powercord 1800mm (6 fe
DSLPTC/T connecting ca
DSLPTC1/T connecting ca
PELMET
A continuous lighting system
developed for alcoves and pelmets,
to provide a continuous, uniform
lighting effect
CEILING / WALL
83
The Pelmet lighting system offers an
economical yet efficient method of providing
an even distribution of light in pelmets
and coves.
The offset lamp holders allows for simple
overlapping of lamps to ensure even
illumination with no ‘black spots’.
The Pelmet light is complete with make
and break 3 or 5 pole connectors for ease
of installation.
Connection
Available in dimmable and non-dimmable
variants.
495
B
C
371
248
124
D
A
E
1
PRODUCT CODE
(NOM) DIMENSIONS
A
B
C
D
E
PELMET SURFACE MOUNTED
VARIATION
SUFFIX
Standard
-000
-100
EL-PMT-114-100-___
1x14W T5
575
85
60
65
65
-200
EL-PMT-124-100-___
1x24W T5
575
85
60
65
65
-300
EL-PMT-128-100-___
1x28W T5
1175
75
50
65
65
-400
EL-PMT-154-100-___
1x54W T5
1175
75
50
65
65
-500
-600
-700
www.eaglelighting.com.au/pelmet
PELMET
N18226
41
Pozzo I
RECESSED
523
Luminaire
FCH
Ø
1x40
350
1x55
350
1x60
450
1x60
550
1x60+LED
450
Light source included.
Suffix code
24780
24781
24782
24783
24797
■
▲
■ ● ▲
▲
▲
▲ -136 DALI
Accessories
Assembly plate 350, 600-module visible T-bars
Replacement light source
W
Socket
94982
94983
94984
94986
94987
94988
Installation
Recessed mounting in ventilated
or unventilated ceilings. Fixing
brackets included with luminaire.
An assembly plate should be used
when installing in soft tile ceilings.
Connection
The luminaire is equipped with
a 2.5 m mains cable and earthed
plug. 3-way snap-in terminal block
2.5 mm². Luminaire for LED RGB
has separate connection for the
coloured light.
Design
Luminaire in white (RAL 9003) structured finish. Luminaire housing of
enamelled deep drawn aluminium.
Diffuser of opalised acrylic.
Dimming
e-Sense – with concealed microwave sensor for on/off function or
absence dampening 10–100 %. For
further information please refer to
the dimming section in the Technical Information chapter.
Miscellaneous
The luminaire’s opal shade is adjustable vertically – to create a light
well in the uppermost position or
an opal surface in the lowermost
position. RGB allows setting of a
specific colour, alternatively colour
sequences, controlled by DALI. Enclosure class IP 44 under suspended
ceilings and IP 20 above suspended
ceilings.
830
40
2GX13
81393
55
2GX13
81312
60
2GX13
81397
The luminaire housing is easily fitted on
the assembly bracket via a keyhole slot
in the bottom of the housing – quick
and simple.
1x40 W
Pozzo I
≥ 162
Ø1
W
1x40/55 FCH
1x60 FCH
1x60 FCH
Ø1
355
455
555
Ø2
383
483
583
154
Ø2
Pozzo LED RGB gives a possibility to
create permanent or colour-alternating
sequences that create drama and
interest.
186
42
www.fagerhult.com
43
523
Easy
RECESSED
LED
Luminaire
LED
kg
Colour temp.
Distribution angle 24°
7W
0.3
830
0°/0°
7W
0.3
840
0°/0°
7W
0.4
830
355°/30°
7W
0.4
840
355°/30°
7W
0.3
830
0°/0°
7W
0.3
840
0°/0°
7W
0.4
830
355°/30°
7W
0.4
840
355°/30°
7W
0.3
830
0°/0°
7W
0.3
840
0°/0°
7W
0.4
830
355°/30°
7W
0.4
840
355°/30°
24°, 830~500 lm,
840~600 lm
38°, 830~500 lm,
840~600 lm
Accessories
Assembly plate for soft tile ceiling, Ø 75, 95, 107
Driver 9 W 350 mA, DIM
White
Grey
76840
76841
76890
76891
76844
76845
76894
76895
76922
76923
76926
76927
76924
76925
76928
76929
76842
76843
76892
76893
76846
76847
76896
76897
41982
98178
Installation
Recessed in ventilated or unventilated ceilings. Installation springs
for quick assembly included. The
assembly plate should be used for
installation in soft-tile ceilings (see
accessories).
Connection
Connect to the driver. The luminaire
is supplied with a cable for connecting to the driver.
Design
Luminaire body in cast aluminium.
Assembly springs in spring steel.
White (RAL 9016) or aluminiumgrey (RAL 9006) structure. The luminaire is available in two designs: 30°
fixed or tilting, and 355° swivelling.
Miscellaneous
LED module consists of 7 LEDs fitted
with lenses. By default the 98178
driver is dimmable using a 1–10 V
potentiometer. Driver ordered
separately.
54°, 830~500 lm,
840~600 lm
=Ø 90
=Ø 70
80
80
≤ 35
≤ 26
0–30°
80
30
105
LED module connected to driver.
44
300
www.fagerhult.com
45
Pleiad SLD G2 205
RECESSED
523
FSM-E
kg
Reflector
1x14
0.5
Specular
1x14
0.5
Matt
2x14
0.5
Specular
2x14
0.5
Matt
FSM-E
2x18
0.5
Specular
2x18
0.5
Matt
1x26
0.5
Specular
1x26
0.5
Matt
2x26
0.5
Specular
2x26
0.5
Matt
1x32
0.5
Specular
1x32
0.5
Matt
830
77353
77354
77358
77359
840
77453
77454
77458
77459
■
■
■
■
77355
77357
77360
77362
77365
77367
77370
77372
77455
77457
77460
77462
77465
77467
77470
77472
■
■
■
■
■
■
■
■
▲
▲
▲
▲
■
■
■
■
■
-03
-111
-303
-319
-322
■ -323
-133
-138
-205
-316
▲ -136
Mains cable and earthed plug, RKK 3x0.75 mm², L=2,5 m.
HF-std with Wieland GST18i3 (3-way). One outlet socket.
Connecting cable Wieland GST 18i male, L=3.0 m.
Emergency luminaire HF-std
SwitchDim/DSI with Wieland GST18i5 (5-way).
One outlet socket.
DALI with Wieland GST18i5 (5-way). One outlet socket.
DALI
SwitchDim/DSI
1–10 V
Emergency luminaire SwitchDim/DSI
DALI
-
Installation
Suitable for recessed mounting in
unventilated or ventilated ceilings.
Light sources are fitted in the luminaire. Assembly springs for quick,
tool-free installation included. An
assembly plate should be used
The ballast box can be detached for
flexible installation.
Connection
The luminaire for emergency
lighting has a separate emergency
lighting box, which is connected to
the luminaire with snap-in connector. All connections are made in the
emergency lighting box.
Design
Luminaire body of black PBT plastic
and reflector with reflector ring of
white PBT plastic (RAL 9010).
Reflector
Rotational symmetric reflector in
metallised PBT in specular or matt
reflector has a protective coat of
scratch-resistant lacquer.
Miscellaneous
Available as standard with mains
cable and earthed plug or Wieland
snap-in connector. The luminaire is
equipped with dust protection in
the light opening.
Emergency box
Type
kg
Emergency box, 1 h operating time
Standard
0.9
98014
Self-test IV, potential free
0.9
98015
Self-test IV, DALI
0.9
98016
Standard
0.9
98017
0.9
98018
Self-test IV, DALI
0.9
98019
Information on Emergency box, can be found in the Emergency
Lighting chapter.
2x14 W, specular
2x14 W, matt
1x26 W, specular
1x26 W, matt
1x32 W, specular
1x32 W, matt
Downward tilted ballast box.
182
t
Ø 205
t=1-30
454,8
182
131
Ø 223
46
Detached ballast box.
www.fagerhult.com
241
Pleiad SLD G2 245
523
830
77373
77374
77378
77379
840
77473
77474
77478
77479
77375
77377
77380
77382
77475
77477
77480
77482
■
▲
■ -03 Mains cable and earthed plug, RKK 3x0,75 mm², L=2.5 m.
■ -111 HF-std with Wieland GST18i3 (3-way). One outlet socket.
■
▲
■ -303 Connecting cable Wieland GST 18i male, L=3.0 m.
■
▲
■
▲
■ -319 Emergency luminaire HF-std
■ -322 SwitchDim/DSI with Wieland GST18i5 (5-way).
One outlet socket.
Emergency box
Type
kg
Standard
0.9
0.9
Self-test IV, DALI
0.9
Standard
0.9
0.9
Self-test IV, DALI
0.9
■
■ -323 DALI with Wieland GST18i5 (5-way). One outlet socket.
■
-133
-138
-205
-316
▲ -136
■
■
DALI
SwitchDim/DSI
1–10 V
Emergency luminaire SwitchDim/DSI
DALI
RECESSED
FSM-E
kg
Reflector
1x17
0.6
Specular
1x17
0.6
Matt
2x17
0.6
Specular
2x17
0.6
Matt
FSM-E
2x32
0.6
Specular
2x32
0.6
Matt
1x42
0.6
Specular
1x42
0.6
Matt
Installation
Light sources are fitted in the luminaire. Assembly springs for quick,
tool-free installation included. An
assembly plate should be used
Connection
The luminaire for emergency
lighting has a separate emergency
lighting box, which is connected to
the luminaire with snap-in connector. All connections are made in the
emergency lighting box.
Design
Luminaire body of black PBT plastic
and reflector with reflector ring of
white PBT plastic (RAL 9010).
Reflector
Rotational symmetric reflector in
metallised PBT in specular or matt
scratch-resistant lacquer.
Miscellaneous
Available as standard with mains
cable and earthed plug or Wieland
snap-in connector. The luminaire is
equipped with dust protection in
the light opening.
-
98014
98015
98016
98017
98018
98019
Information on Emergency box, can be found in the Emergency
Lighting chapter.
1x17 W, specular
1x17 W, matt
1x42 W, specular
1x42 W, matt
Front assembly spring.
189
Ø 245
t
t=1-30
508
189
146
Ø 263
242
Ventilation duct for the light source.
www.fagerhult.com
47
RECESSED
523
FSQ-E
kg
Reflector
1x18
0.6
Specular
1x18
0.6
Matt
830
77300
77302
840
77400
77402
■
■ -03 Mains cable and earthed plug, RKK 3x0.75 mm², L=2.5 m.
■
■ -215 Emergency luminaire for battery box 1 h
One outlet socket.
1x18 W, specular
1x18 W, matt
t
Ø 165
379
105
94
h
HF
t
1-23
24-30
h
94
t+71
Conv./Konv.
t
h
1-23
94
24-30 t+71
183
246
48
www.fagerhult.com
Installation
Light sources are fitted in the luminaire. Assembly springs for quick assembly without tools are included.
Connection
Single phase through-wiring is
possible on luminaires for HF-dim
and emergency lighting. Luminaires
for emergency lighting feature a
separate battery box. The charge
indicator is located in the reflector
ring.
Design
Luminaire body of black PBT-plastic
(RAL 9004) and reflector with white
reflector ring of white PBT-plastic
(RAL 9010).
Reflector
Metallised PBT in specular or matt
scratch-resistant clear lacquer.
523
830
77305
77307
77310
77312
840
77405
77407
77410
77412
■
■ -03 Mains cable and earthed plug, RKK 3x0.75 mm², L=2.5 m.
■
■
■
One outlet socket.
2x18 W, specular
2x18 W, matt
1x26 W, specular
1x26 W, matt
h
t
Ø 205
scratch-resistant clear lacquer.
Miscellaneous
Available on special request with
mains cable and earthed plug or
Wieland snap-in connector. Luminaires supplied with light source
fitted.
The ballast box is easily detached when
there is a low installation height.
HF
t
1-30
h
115
Conv./Konv.
t
h
1-30
119
423
121
RECESSED
FSQ-E
kg
Reflector
2x18
0.8
Specular
2x18
0.8
Matt
1x26
0.8
Specular
1x26
0.8
Matt
Installation
Light sources are fitted in the luminaire. Assembly springs for quick assembly without tools are included.
Connection
Snap-in terminal block 5x2.5mm²,
Single phase through-wiring is possible on luminaires for emergency
lighting. Luminaires for emergency
lighting feature a separate battery
box. The charge indicator is located
in the reflector ring.
Design
Luminaire body of black PBT-plastic
(RAL 9004) and reflector with white
reflector ring of white PBT-plastic
(RAL 9010).
Reflector
Metallised PBT in specular or matt
110
223
The ballast box is easily detached when
there are obstacles in the recessed area.
www.fagerhult.com
247
49
RECESSED
50
GECKO IP44
COMPACT FLUORESCENT
DOWNLIGHTS
RECESSED
50
GECKO IP44
Frosted glass accessory
Side view
quatiis es accus, nis dolor a autatur aut
ent quatur rectotatur, cusant officiende vel
imagnimp
N18226
PRODUCT CODE
(NOM) DIMENSIONS
A
B
C
CUTOUT
GECKO
EL-GEC-113-100-000
1x13W TC-T/E
146
152
110
81
100
EL-GEC-118-100-000
1x18W TC-T/E
152
152
110
81
100
EL-GEC-126-100-000
1x26W TC-T/E
167
152
110
81
100
ACCESSORIES
EL-GEC-ACC-100-000
Trim Ring with Frosted Glass
www.eaglelighting.com.au/gecko
51
Notor Recessed
523
RECESSED
Delta
Luminaire, single installation
FDH
kg
Length
1x13/14
1.9
600
1x25/28
3.5 1200
1x50/54
3.5 1200
1x32/35
4.8 1500
1x45/49
4.8 1500
2x1x25/28 6.5 2400
2x1x50/54 6.5 2400
2x1x32/35 8.1 3000
2x1x45/49 8.1 3000
TPa module available on request.
Suffix code
Luminaire, continuous installation
FDH
kg
Length Start
1x13/14
1.9
600
22866
1x25/28
3.5 1200
22867
1x50/54
3.5 1200
22868
1x32/35
4.8 1500
22869
1x45/49
4.8 1500
22870
2x1x25/28 6.5 2400
22875
2x1x50/54 6.5 2400
22876
2x1x32/35 8.1 3000
22877
2x1x45/49 8.1 3000
22878
■
■ -368 DALI
■
■
■
■
■
■
■
■
Continuous/End
■
22883
■
■
■
■
22879
22880
22881
22882
■
■
■
■
1x32/35 W
1x50/54 W
1x25/28 W
Single
22861
22862
22863
22864
22865
22871
22872
22873
22874
In the continuous versions the Delta
louvres hook into each other to prevent
the appearance of unwanted gaps.
1x45/49 W
Single
W
1x13/14
1x25/28/50/54
1x32/35/45/49
2x1x25/28 /50/54
2x1x32/35/45/49
A¹
574
1174
1474
2253
2853
A²
A¹+22
A¹+22
A¹+22
A¹+22
A¹+22
Continuous
Start
A¹+10x80
A¹+10x80
A¹+10x80
A¹+10x80
A¹+10x80
570
1170
1470
2249
2849
Cont./End Total
A¹
A¹
Total
A²
2159
2759
A¹+A¹+26
A¹+A¹+26
A¹+A¹
A¹+A¹
78.5
t
h
10–30 100
30–50 121
Total A¹+10x80
Total A¹+10x80
A¹
h 100
102
t
80
52
144
Installation
Luminaire for recessed mounting in
ventilated or unventilated suspended ceilings. Installed in suspended
ceilings with visible T-bars, (25 or
15 mm) or fixed suspended ceilings.
Connection
Connection by means of a connection box on top of the luminaire.
Wieland Chassis connector 3-way
(GST 18i3), with dimming 5-way
(GST 18i5). In a continuous installation the luminaire row should
always begin with a start luminaire.
With a continuous installation the
luminaire units are interconnected
with a connection cable in the connection box.
Design
Luminaire body in natural anodised,
extruded aluminium. The fluorescent lamps in the continuous luminaires overlap, creating an unbroken
luminous line.
Louvre
Delta – microprismatic acrylic louvre
(PMMA).
Reflector
Reflector of metallised aluminium.
Miscellaneous
For connectors and cables see accessories.
90.5
A²
www.fagerhult.com
L-couplings to make 90° turns.
Notor Recessed
523
Suffix code
Single
22885
22886
22887
22888
22889
22890
22891
22892
22893
FDH
kg
Length
Start
1x13/14
2.0
600
22885
1x25/28
3.7
1200
22886
1x50/54
3.7
1200
22887
1x32/35
5.0
1500
22888
1x45/49
5.0
1500
22889
2x1x25/28 6.9
2400
22890
2x1x50/54 6.9
2400
22891
2x1x32/35 8.0
3000
22892
2x1x45/49 8.0
3000
22893
■
■ -368 DALI
■
■
■
■
■
■
■
■
■
■
■
■
22894
22895
22896
22897
■
■
■
■
A fixing bracket holds the luminaires
together in a continuous installation.
1x45/49 W
Single
W
1x13/14
1x25/28/50/54
1x32/35/45/49
2x1x25/28 /50/54
2x1x32/35/45/49
A¹
574
1174
1474
2253
2853
A²
A¹+22
A¹+22
A¹+22
A¹+22
A¹+22
Continuous
Start
A¹+10x80
A¹+10x80
A¹+10x80
A¹+10x80
A¹+10x80
78.5
t
h
10–30 100
30–50 121
570
1170
1470
2249
2849
Cont./End Total
A¹
A¹
Total
A²
2159
2759
A¹+A¹+26
A¹+A¹+26
A¹+A¹
A¹+A¹
Total A¹+10x80
Total A¹+10x80
A¹
h 100
102
t
80
recessed
■
Continuous/End
1x32/35 W
1x13/14 W
RECESSED
FDH
kg
Length
1x13/14
2.0
600
1x25/28
3.7
1200
1x50/54
3.7
1200
1x32/35
5.0
1500
1x45/49
5.0
1500
2x1x25/28 6.9
2400
2x1x50/54 6.9
2400
2x1x32/35 8.0
3000
2x1x45/49 8.0
3000
Installation
Connection
Design
luminous line.
Louvre
Lamell – aluminium enamelled
cross-blade louvre made of sheet
steel.
Reflector
Miscellaneous
pendant/surface
Lamell
90.5
A²
www.fagerhult.com
In a continuous installation the units
are easily interconnected by means of a
connection box on top of the luminaire.
143
53
Notor Recessed
523
RECESSED
FDH
kg
Length
1x13/14
1.9
600
1x25/28
3.5
1200
1x50/54
3.5
1200
1x32/35
4.8
1500
1x45/49
4.8
1500
2x1x25/28
6.5
2400
2x1x50/54
6.5
2400
2x1x32/35
8.1
3000
2x1x45/49
8.1
3000
Suffix code
FDH
kg
Length
Start
1x13/14
1.9
600
22909
1x25/28
3.5
1200
22910
1x50/54
3.5
1200
22911
1x32/35
4.8
1500
22912
1x45/49
4.8
1500
22913
2x1x25/28
6.5
2400
22914
2x1x50/54
6.5
2400
22915
2x1x32/35
8.1
3000
22916
2x1x45/49
8.1
3000
22917
■
■ -368 DALI
■
■
■
■
■
■
■
■
Continuous/End
■
22922
■
■
■
■
22918
22919
22920
22921
■
■
■
■
1x32/35 W
1x50/54 W
1x25/28 W
Single
22900
22901
22902
22903
22904
22905
22906
22907
22908
The Opal louvres in a continuous installation are held together with magnets
to prevent unwanted gaps.
1x45/49 W
Single
W
1x13/14
1x25/28/50/54
1x32/35/45/49
2x1x25/28/50/54
2x1x32/35/45/49
A¹
574
1174
1474
2253
2853
Continuous
A²
A¹+22
A¹+22
A¹+22
A¹+22
A¹+22
A¹+10x80
A¹+10x80
A¹+10x80
A¹+10x80
A¹+10x80
78.5
t
h
10–30 100
30–50 121
h
Start
A¹
570
1170
1470
2249
2849
Cont./End Total
A¹
A¹
Total
A²
2159
2759
A¹+A¹+26 Total A¹+10x80
A¹+A¹+26 Total A¹+10x80
A¹+A¹
A¹+A¹
A¹
100
102114
t
80
54
71.5
90.5
A²
www.fagerhult.com
In the Delta, Lamell and Opal continuous variations the fluorescent lamps
are overlapped to create an unbroken
luminous line.
145
recessed
Installation
Connection
Design
luminous line.
Louvre
Opal – extruded profile in frosted
acrylic (PMMA).
Reflector
Miscellaneous
pendant/surface
Opal
Indigo Combo Delta
523
1-cell
Luminaire
FDH
kg
VTB
Module 300x1200
1x25/28
7.1
24910
2x25/28
7.2
24911
1x50/54
7.1
24912
Module 600x600
2x13/14
7.3
24913
2x20/24
7.3
24914
2x25/28 W
1x25/28 W
Suffix code
HB
■ -368 DALI
24915
24916
24917
■
24918
24919
■
■
■
Accessories
1x50/54 W
W
A1
VTB
300⊗1200 1/2⊗25/28/50/54 1196
600⊗600 2⊗13/14/20/24
596
HB
300⊗1200 1/2⊗25/28/50/54 1200
600⊗600 2⊗13/14/20/24
600
A2
600
91645
91590
Lined diffuser LL<1500 cd/m²/each
Perforated diffuser LL<1000 cd/m²/each
LL average luminance.
■
2x13/14 W
B1
B2
1175
575
296
596
265
550
1175
575
300
600
260
560
1200
91646
91591
RECESSED
recessed
pendant/surface
Installation
Luminaire for recessed installation in ventilated or unventilated
suspended ceilings. Two optional
designs.
VTB – for suspended ceilings with
visible T-bars 25 or 15 mm.
HB – for suspended ceiling with
concealed T-bars. Ceiling type
plasterboard, suspended ceilings
with edge framing type C or D and
for metal tile suspended ceilings.
Four fixing brackets are supplied for
luminaire type HB.
Connection
The luminaire is equipped with a
2.4 m mains cable and earthed plug.
Luminaires with dimming are supplied with a 5-pole cable.
Design
Body and reflector of white
enamelled sheet steel (RAL 9003
structured) finish.
Louvre
Delta – micro-prism louvre in acrylic
TPb (PMMA). Frame with louvres
remains attached when opened.
Reflector
White enamelled sheet steel.
Dimming
Miscellaneous
Indigo Combo is designed to
conform to EN 12464-1 in the most
relevant outputs.
2x20/24 W
AxB
B1
280⊗1180
580⊗580
A1
HB
VTB
2
2
B
B
A2
130
130
t < 38
www.fagerhult.com
Visible part of louvre frame in anodised
aluminum.
151
55
Indigo Combo Beta
523
RECESSED
1-cell
Luminaire
FDH
kg
Module 300x1200
1x25/28
6.3
2x25/28
6.4
1x50/54
6.3
Module 600x1200
1x25/28 10.6
2x25/28 10.7
1x50/54 10.6
Module 600x600
2x13/14
6.5
2x20/24
6.5
1x25/28/50/54 W,
300x1200 with lined
diffuser
Suffix code
VTB
HB
24855
24856
24857
24885
24886
24887
24871
24872
24873
24901
24902
24903
■ -368 DALI
24862
24864
2x25/28 W,
300x1200 with lined
diffuser
24892
24894
■ ●
● -308 e-Sense ActiLume
■ ●
■ ●
■ ●
■ ●
Accessories
■ ●
■ ●
■
2x13/14/20/24 W,
600x600 with lined
diffuser
Lined diffuser LL<1500 cd/m²/each
Perforated diffuser LL<1000 cd/m²/each
Colour filter – blue/each
Colour filter – green/each
Colour filter – yellow/each
Colour filter – red/each
LL average luminance.
2x25/28 W,
600x1200 with lined
diffuser
600
91645
91590
91392
91394
91396
91398
1200
91646
91591
91393
91395
91397
91399
Installation
Luminaire for recessed installation
in ventilated or unventilated suspended ceilings. Two optional designs. VTB – for suspended ceilings
with visible T-bars 25 or 15 mm.
HB – for suspended ceiling with
concealed T-bars. Ceiling type plasterboard, suspended ceilings with
edge framing type C or D and for
metal cassette suspended ceilings.
Four fixing brackets are supplied for
luminaire type HB.
Connection
The luminaire is equipped with
a 2.4 m mains cable and earthed
continental plug. Luminaires with
dimming are supplied with a 5-pole
cable.
Design
Body and reflector of white enamelled sheet steel (RAL 9003 structured) finish.
Louvre
louvre with side and cross-blades of
satin matt metallised aluminium
with excellent reflection characteristics (> 92 %), integrated into a single
unit. The louvre remains attached
when lowered. Earthed.
Reflector
White enamelled sheet steel.
Dimming
Miscellaneous
The luminaire can on request be
equipped with other HF-ballasts for
dimming. Indigo Combo is designed
to conform to EN 12 464-1 in its
most relevant outputs. Limited
average luminance is documented
as LL (Luminaire Luminance).
Indigo Combo in rectangular style
300x1200 mm.
The lined diffuser, placed on the top
of the side profile, broadens the light
distribution and acts as a dust cover.
56
ENVIRO
Enviro provides pleasing, high visual
comfort for environments where a
high level of vertical illuminance
is required
RECESSED
ENVIRO
31
The Enviro features an optical system that
greatly reduces contrast brightness thereby
providing high visual comfort.
This is achieved by employing a two part
optical system comprising of a curved
transitional metal reflector and a perforated
mesh baffle with opal inlay.
Enviro greatly reduces gloomy “cavern
effect” interiors by distributing high vertical
levels to the walls whilst creating the illusion
of a bright ceiling.
Enviro 600x600
Perforated metal basket
Suitable for T5 lamps and available in
300mm and 600mm module widths.
271
A
A hinged basket is fitted to allow for easy
lamp replacement.
204
136
C
OPTIONS
68
+ Emergency available on request
1
B
N18226
PRODUCT CODE
(NOM) DIMENSIONS
A
B
C
CUTOUT
ENVIRO EXPOSED T-BAR
VARIATION
SUFFIX
Standard
-000
-100
EL-ENV-114-100-___
1x14W T5
600
300
120
-200
EL-ENV-114-101-___
1x14W T5
600
600
130
-300
EL-ENV-214-100-___
2x14W T5
600
300
120
-400
EL-ENV-214-101-___
2x14W T5
600
600
130
-500
EL-ENV-124-100-___
1x24W T5
600
300
120
-600
EL-ENV-124-101-___
1x24W T5
600
600
130
-700
EL-ENV-224-100-___
2x24W T5
600
600
130
EL-ENV-128-100-___
1x28W T5
1200
300
120
EL-ENV-128-101-___
1x28W T5
1200
600
130
EL-ENV-228-100-___
2x28W T5
1200
300
120
EL-ENV-228-101-___
2x28W T5
1200
600
130
ENVIRO PLASTER RECESSED
EL-ENV-114-102-___
1x14W T5
630
335
120
605
310
EL-ENV-214-103-___
2x14W T5
620
620
120
605
605
EL-ENV-128-102-___
1x28W T5
1230
335
130
1205
310
EL-ENV-228-102-___
2x28W T5
1230
335
130
1205
310
www.eaglelighting.com.au/enviro
57
FLEXITROFFER
A utility range of luminaires suitable
for recessing into exposed T-Bar or
plasterboard ceilings
The Flexitroffer is a general purpose utility
fixture suitable for either exposed t-bar or
plasterboard ceilings. It will accept most
prismatic panels which are located within
the luminaire body. Due to the full body
construction the fitting achieves a high LOR
with even luminance across the lens.
OPTIONS
+ Emergency available on request
Exposed t-bar
Plaster recessed
+ Hinged frame
364
273
C
182
91
A
B
DIFFUSER OPTIONS
SUFFIX
Y19
-1
Y5
-2
Y7
-3
Y12
-4
Opal
-5
Y20
-6
Y19 Silver Tint
-7
1
N18226
PRODUCT CODE
(NOM) DIMENSIONS
A
B
C
CUTOUT
FLEXITROFFER EXPOSED T-BAR
VARIATION
SUFFIX
Standard
-000
-100
EL-FT5 - 114-_00-___
1 x 14W
600
300
100
-200
EL-FT5 - 214-_00-___
2 x 14W
600
300
100
-300
EL-FT5 - 314-_04-___
3 x 14W
600
300
100
-400
EL-FT5 - 314-_00-___
3 x 14W
600
600
100
-500
EL-FT5 - 414-_00-___
4 x 14W
600
600
100
-600
EL-FT5 - 128-_00-___
1 x 28W
1200
300
100
-700
EL-FT5 - 228-_00-___
2 x 28W
1200
300
100
FLEXITROFFER PLASTER RECESSED
EL-FT5 - 214-_02-___
2 x 14W
640
335
120
615
310
EL-FT5 - 128-_01-___
1 x 28W
1250
335
120
1225
310
EL-FT5 - 228-_01-___
2 x 28W
1250
335
120
1225
310
FLEXITROFFER SURFACE MOUNTED
EL-FT5 - 114-_03-___
1 x 14W
600
300
100
EL-FT5 - 214-_04-___
2 x 14W
600
300
100
EL-FT5 - 314-_03-___
3 x 14W
600
600
100
EL-FT5 - 414-_04-___
4 x 14W
600
600
100
EL-FT5 - 128-_04-___
1 x 28W
1200
300
100
EL-FT5 - 228-_03-___
2 x 28W
1200
300
100
58
www.eaglelighting.com.au/flexitroffer
FLEXITROFFER
RECESSED
35
VISIONLINE
Visionlines utilises new age material
and its edgy appearance makes
it ideal for modern and high end
architectual commercial buildings
RECESSED
VISIONLINE
37
The Visionline has been developed in
response to requirements for an economical,
general-purpose luminaire that may be used
in diverse applications where good lighting,
pleasing lines and good visual comfort are of
paramount importance.
Visionline’s sleek and modern appearance
makes it suitable for offices, boardrooms
and retail applications. An extruded
aluminium mini frame allows refractive
panel to be easily removed and reinstalled
and complements Visionline’s appearance.
Surface mounted
The Y5 refractor employed by Visionline
offers excellent photometric performance.
The embossed pearl pattern diffuser has a
fine rib [linear reed] that provides superb
lamp obscuration and uniform luminance
over the entire surface area of the panel.
270
C
203
135
B
68
OPTIONS
+ Clear Overlay Acrylic
1
A
PRODUCT CODE
N18226
(NOM) DIMENSIONS
A
B
C
CUTOUT
VISIONLINE EXPOSED T-BAR
VARIATION
SUFFIX
Standard
-000
-100
-200
-300
EL-VIS-114-100-___
1x14W T5
600
150
55
EL-VIS-114-300-___
1x14W T5
600
300
55
EL-VIS-214-300-___
2x14W T5
600
300
55
EL-VIS-424-100-___
4x24W T5
600
600
55
-400
EL-VIS-128-100-___
1x28W T5
1200
150
55
-500
EL-VIS-128-300-___
1x28W T5
1200
300
55
-600
EL-VIS-228-300-___
2x28W T5
1200
300
55
EL-VIS-254-100-___
2x54W T5
1200
300
55
-700
VISIONLINE PLASTER RECESSED
EL-VIS-114-400-___
1x14W T5
600
260
55
575
220
EL-VIS-214-400-___
2x14W T5
600
260
55
575
220
EL-VIS-414-200-___
4x14W T5
600
600
55
380
575
EL-VIS-424-200-___
4x24W T5
600
600
55
380
575
EL-VIS-128-400-___
1x28W T5
1200
260
55
1175
220
EL-VIS-228-400-___
2x28W T5
1200
260
55
1175
220
VISIONLINE SURFACE MOUNTED
EL-VIS-114-600-___
1x14W T5
600
150
55
EL-VIS-214-600-___
2x14W T5
600
200
55
EL-VIS-128-600-___
1x28W T5
1200
200
55
EL-VIS-228-600-___
2x28W T5
1200
200
55
www.eaglelighting.com.au/visionline
59
CLEANROOM
IP44 RATED
A range of luminaires developed for
specialist ‘cleanroom’ applications
The Cleanroom range of fixtures has
been developed to meet the requirements
of specialist installations, where a fully
sealed luminaire is needed to prevent
contamination of the clean environment.
Suitable for diverse applications such
as hospitals, food preparation areas,
pharmaceuticals manufacturing areas, fibre
optic production areas and applications
where a clean environment is required.
Torsion spring
Gasket
OPTIONS
+ Plaster Recessed
+ ExposedT-Bar
364
+ Sandwich Panel
C
273
+ Emergency CO D16/ C90 D20 (3x36W Version)
182
B
+ Surface mounted version available upon
request
91
+ R5 louvre option
1
A
N18226
PRODUCT CODE
(NOM) DIMENSIONS
A
B
C
CLEANROOM T5 : BOTTOM ACCESS TRIPLE GASKET
CUTOUT
VARIATION
SUFFIX
Standard
-000
-100
EL-CCL-214-_03-___
2 x 14W T5 Plaster Recessed
650
650
135
-200
EL-CCL-314-_00-___
650
650
135
-300
EL-CCL-414-_00-___
650
650
135
-400
EL-CCL-228-_00-___
1275
370
135
-500
EL-CCL-328-_00-___
1275
370
135
-600
EL-CCL-235-_00-___
1575
370
135
-700
1275
370
135
DIFFUSER OPTIONS
SUFFIX
135
Y19
-1
Y5
-2
CLEANROOM T5 : TOP ACCESS TRIPLE GASKET
EL-CCL-228-_01-___
EL-CCL-328-_01-___
1275
370
CLEANROOM T8 BOTTOM ACCESS TRIPLE GASKET
EL-CCL-236-_00-___
1275
370
135
Y7
-3
EL-CCL-336-_00-___
1275
370
135
Y12
-4
Opal
-5
Y20
-6
Y19 Silver tint
-7
CLEANROOM T8 : TOP ACCESS TRIPLE GASKET
EL-CCL-236-_01-___
1275
370
135
EL-CCL-336-_01-___
1275
370
135
60
www.eaglelighting.com.au/cleanroom
CLEANROOM
RECESSED
39
SECUREROOM
IP65/PC2 RATED
A range of luminaires specifically
developed for specialist cleanroom
and security applications
RECESSED
SECUREROOM
43
The Cleanroom Security range of fixtures has
been developed to meet the requirements
of specialist installations, where a fully
sealed luminaire is needed to prevent
contamination of the secure environment.
Suitable for diverse applications such PC2
laboratories, hospitals, psychiatric wards,
pharmaceuticals manufacturing areas, fibre
optic production areas and applications
where a clean and secure environment
is required.
Gasket
Tamper proof screw
OPTIONS
+ Sandwich Panel
364
C
+ Emergency CO D16/ C90 D20 (3x36W Version)
273
+ Surface mounted available upon request
182
B
+ R5 louvre option
91
1
A
PRODUCT CODE
N18226
(NOM) DIMENSIONS
A
B
C
CUTOUT
SECUREROOM T5 BOTTOM ACCESS TRIPLE GASKET
VARIATION
SUFFIX
Standard
-000
-100
EL-CCL-214-_04-___
685
685
135
-200
EL-CCL-314-_04-___
685
685
135
-300
EL-CCL-228-_05-___
1295
405
135
-400
EL-CCL-328-_05-___
1295
405
135
-500
EL-CCL-235-_02-___
1295
405
135
-600
SECUREROOM T8 BOTTOM ACCESS TRIPLE GASKET
EL-CCL-418-_05-___
685
685
135
EL-CCL-236-_02-___
1295
405
135
EL-CCL-336-_02-___
1295
405
135
NOTE :
Standard complete with Polycarbonate. For PC2 Environment, Acrylic panel replaces Polycarbonate (add suffix -P)
www.eaglelighting.com.au/secureroom
-700
PC2 Acrylic panel
-PC2
DIFFUSER OPTIONS
SUFFIX
Y19
-1
Y5
-2
Y7
-3
Y12
-4
Opal
-5
Y20
-6
Y19 Silver tint
-7
61
GONDOL
IP44 RATED
A wall washing T-Bar luminaire
complete with sealed gasket and
clear acrylic cover.
GONDOL
RECESSED
41
Swinging lamp holder for ease of replacement
C
B
A
N18226
PRODUCT CODE
(NOM) DIMENSIONS
A
B
C
EXPOSED T-BAR
EL-17631-100-___
1x28w T5
62
1200
300
75
www.eaglelighting.com.au/cleanroomr5
CUTOUT
VARIATION
SUFFIX
Standard
-000
-100
-200
-300
-400
-500
-600
-700
IP65 RATED
DOWNLIGHTS LED/LOW VOLTAGE
RECESSED
55
55
IP65 RATED
Tamperproof version
OPTIONS
+ Tamperproof version
CUTOUT
B
A
N18226
PRODUCT CODE
(NOM) DIMENSIONS
A
B
C
CUTOUT
LED LAMP OPTIONS
FG-81643-CH
LED MODULE 7X1W 830 38
DEG LED LAMP ONLY
FG-81644-CH
LED MODULE 7X1W 840 38 DE
LED LAMP ONLY
FG-81645-CH
DEG LED LAMP ONLY
FG-81646-CH
DEG LED LAMP ONLY
FG-81647-CH
DEG LED LAMP ONLY
FG-81648-CH
DEG LED LAMP ONLY
IP65
LC-IP115-WH
1x20 / 35 / 50 WHITE
85
85
73
www.eaglelighting.com.au/ip65rated
63
TAMPA DL
SECURITY RANGE
Vandal Resistant Downlight
SECURITY
58
58
TAMPA DL
Tamperproof screws
OPTIONS
220
+ Opal diffuser add suffix -0
147
A
B
B
73
CUTOUT
CUTOUT
Integral Gear/Remote Gear. Dimension A
applies only to Integral Gear
PRODUCT CODE
293
1
N18226
(NOM) DIMENSIONS
A
B
C
CUTOUT
TAMPA DL
VARIATION
SUFFIX
Standard
-000
-100
EL-SAT-118-B04-___
1x18W
200
155
200
-200
EL-SAT-218-B04-___
2x18W
200
155
200
-300
EL-SAT-126-B24-___
1x26W
----
155
200
-400
-500
-600
-700
NOTE :
Standard comes with 3mm clear polycarbonate diffuser.
64
www.eaglelighting.com.au/tampadl
TAMPA T5
SECURITY RANGE
Slimline vandal resistant luminaire
TAMPA T5
SECURITY
45
Tamper proof screws
390
C
292
195
B
97
1
A
DIFFUSER OPTIONS
SUFFIX
Y19
-1
Y5
-2
Y7
-3
Y12
-4
Opal
-5
Y20
-6
3EA Lens
-7
N18226
PRODUCT CODE
(NOM) DIMENSIONS
A
B
C
CUTOUT
TAMPA PLASTER RECESSED
VARIATION
SUFFIX
Standard
-000
-100
EL-TMP-114-_00-___
1x14W T5
640
155
90
605
115
-200
EL-TMP-214-_00-___
2x14W T5
640
205
90
605
165
-300
EL-TMP-128-_00-___
1x28W T5
1240
155
90
1205
115
-400
EL-TMP-228-_00-___
2x28W T5
1240
205
90
1205
165
-500
-600
-700
www.eaglelighting.com.au/tampat5
65
MSL SErIES 1 CEILINg MOUNT
LIGHT SOurCES
LED
1 x 15W - to specify MSL115C
Halogen
1 x 35W IRC to specify MSL135C
WATTAGE/ILLuMINATION
LED
1 X 15W - 44,900 lux @ 600mm
1 x 15W - 18,800 lux @ 1000mm
MEDICAL
Halogen (IRC) 1 X 35W - 32,000 lux @ 600mm
1 x 35W - 11,000 lux @ 1000mm
1 x 50W - 39,100 lux @ 600mm
1 x 50W - 14,000 lux @ 1000mm
BEAM dIAMETEr
LED
dimensions and range of movement
600
600
1 X 15W - 82mm* @ 600mm
1 x 15W - 127mm* @ 1000mm
Halogen (IRC) 1 X 35W - 110mm* @ 600mm
1 x 35W - 180mm* @ 1000mm
1 x 50W - 120mm* @ 600mm
1 x 50W - 190mm* @ 1000mm
(* measured at 50% of peak value)
COLOur TEMPErATurE
LED
1 x 15W - 4546°K
Halogen (IRC)
- without colour correction filter
- with colour correction filter
1 x 35W - 3030°K
1 x 50W - 3080°K
1 x 35W - 4100°K
1 x 50W - 4185°K
600°
300°
600°
630°
COLOur rENdErING INdEX (CrI)
LED
93
Halogen (IRC) 98
• Complies with Cardiac Protection requirements.
SErVICE LIFE (dEPENdING ON HOurLY uSE)
• Optional Colour Correction Filters for Halogen Lamps
- to specify add /CCF.
LED
Halogen
• Optional 360° Continuous rotating Ceiling Connector at the upper rotation ceiling joint - to specify add /360°.
Note: Optional extra on Series 1 model.
Standard on Series 3 model.
• Suitable for different Ceiling Heights.
Note: Ceiling height must be specified at time of order.
• For ceiling heights lower than 2630mm a Z suspension
arm is used.
66 • For additional information see separate
35,000 - 50,000 hrs
2,000 - 4,000 hrs
VOLTAGE
LED
Halogen
36 VDC
12 V
WEIGHT (APPrOX.)
Ceiling Mount 12 kg
MSL SErIES 3 CEILINg MOUNT
LIGHT SOurCES
LED
3 x 15W - to specify MSL315C
Halogen
LED
3 x 15W - 80,800 lux @ 600mm
3 x 15W - 53,200 lux @ 1000mm
MEDICAL
Halogen (IRC) 3 x 35W - 54,000 lux @ 600mm
3 x 35W - 28,476 lux @ 1000mm
3 x 50W - 64,800 lux @ 600mm
3 x 50W - 35,300 lux @ 1000mm
BEAM dIAMETEr
LED
Halogen (IRC) 3 x 35W - 140mm* @ 600mm
3 x 35W - 180mm* @ 1000mm
3 x 50W - 170mm* @ 600mm
3 x 50W - 210mm* @ 1000mm
700
3 x 15W - 127mm* @ 600mm
3 x 15W - 132mm* @ 1000mm
700
COLOur TEMPErATurE
600°
300°
600°
Continuous
LED
3 x 15W - 4547°K
Halogen (IRC)
3 x 35W - 3034°K
3 x 50W - 3080°K
3 x 35W - 4059°K
3 x 50W - 4180°K
LED
93
Halogen (IRC) 98
• 360° Continuous rotating Ceiling Connector - at the
upper rotation ceiling joint.
Note: Standard on Series 3 model.
Optional extra on Series 1 model.
• Suitable for different Ceiling Heights.
Note: Ceiling height must be specified at time of order.
• For ceiling heights lower than 2700mm a Z suspension
arm is used.
LED
Halogen
VOLTAGE
LED
Halogen
36 VDC
12 V
WEIGHT (APPrOX.)
Ceiling Mount 22 kg
• For additional information see separate
installationandinstructionleaflet.
10
35,000 - 50,000 hrs
2,000 - 4,000 hrs
67
MSL SErIES 1 WALL MOuNT
LIGHT SOurCES
LED
1 x 15W to specify MSL115W
Halogen
1 x 35W IRC to specify MSL135W
LED
1 X 15W - 44,900 lux @ 600mm
1 x 15W - 18,800 lux @ 1000mm
MEDICAL
1 x 35W - 11,000 lux @ 1000mm
1 x 50W - 39,100 lux @ 600mm
1 x 50W - 14,000 lux @ 1000mm
BEAM dIAMETEr
LED
1 x 35W - 180mm* @ 1000mm
1 x 50W - 120mm* @ 600mm
1 x 50W - 190mm* @ 1000mm
600
1 X 15W - 82mm* @ 600mm
1 x 15W - 127mm* @ 1000mm
500
COLOur TEMPErATurE
600°
300°
600°
130°
LED
1 x 15W - 4546°K
Halogen (IRC)
1 x 35W - 3030°K
1 x 50W - 3080°K
1 x 35W - 4100°K
1 x 50W - 4185°K
LED
93
Halogen (IRC) 98
• Optional Power Cord with Hospital Grade Plug
- to specify add /FP.
Note: Length of cord to be nominated at time of order.
LED
Halogen
35,000 - 50,000 hrs
2,000 - 4,000 hrs
VOLTAGE
LED
Halogen
36 VDC
12 V
WEIGHT (APPrOX.)
Wall Mount 9 kg
68
7
MSL SErIES 3 WALL MOuNT
LIGHT SOurCES
LED
3 x 15W to specify MSL315W
Halogen
LED
3 x 15W - 80,800 lux @ 600mm
3 x 15W - 53,200 lux @ 1000mm
MEDICAL
3 x 35W - 28,476 lux @ 1000mm
3 x 50W - 64,800 lux @ 600mm
3 x 50W - 35,300 lux @ 1000mm
BEAM dIAMETEr
LED
3 x 35W - 180mm* @ 1000mm
3 x 50W - 170mm* @ 600mm
3 x 50W - 210mm* @ 1000mm
600
700
3 x 15W - 127mm* @ 600mm
3 x 15W - 132mm* @ 1000mm
COLOur TEMPErATurE
600°
300°
600°
120°
LED
3 x 15W - 4547°K
Halogen (IRC)
3 x 35W - 3034°K
3 x 50W - 3080°K
3 x 35W - 4059°K
3 x 50W - 4180°K
LED
93
Halogen (IRC) 98
• Optional Power Cord with Hospital Grade Plug
- to specify add /FP.
Note: Length of cord to be nominated at time of order.
LED
Halogen
35,000 - 50,000 hrs
2,000 - 4,000 hrs
VOLTAGE
LED
Halogen
36 VDC
12 V
WEIGHT (APPrOX.)
Wall Mount 18 kg
11
69
MSL SErIES 1 MOBILE TROLLEY
LIGHT SOurCES
LED
1 x 15W to specify MSL115M
Halogen
1 x 35W IRC to specify MSL135M
LED
1 X 15W - 44,900 lux @ 600mm
1 x 15W - 18,800 lux @ 1000mm
MEDICAL
1 x 35W - 11,000 lux @ 1000mm
1 x 50W - 39,100 lux @ 600mm
1 x 50W - 14,000 lux @ 1000mm
BEAM dIAMETEr
LED
1 X 15W - 82mm* @ 600mm
1 x 15W - 127mm* @ 1000mm
1 x 35W - 180mm* @ 1000mm
1 x 50W - 120mm* @ 600mm
1 x 50W - 190mm* @ 1000mm
600
LED
1 x 15W - 4546°K
Halogen (IRC)
1 x 35W - 3030°K
1 x 50W - 3080°K
1 x 35W - 4100°K
1 x 50W - 4185°K
300°
LED
93
Halogen (IRC) 98
870
1470
2000
600°
COLOur TEMPErATurE
LED
Halogen
• Three Metre Power Cord with Hospital Grade Plug.
• Compactfivelegbasewithtwoopposingbraked
wheels for increased stability.
• Standard wheels supplied are 50mm dia.
Optional heavy duty 75mm dia. wheels are available
- to specify add /HdW.
VOLTAGE
LED
Halogen
8
36 VDC
12 V
WEIGHT (APPrOX.)
Mobile Mount 15 kg
70
35,000 - 50,000 hrs
2,000 - 4,000 hrs
MSL SErIES 3 MOBILE TROLLEY
LIGHT SOurCES
LED
3 x 15W to specify MSL315M
Halogen
LED
3 x 15W - 80,800 lux @ 600mm
3 x 15W - 53,200 lux @ 1000mm
MEDICAL
3 x 35W - 28,476 lux @ 1000mm
3 x 50W - 64,800 lux @ 600mm
3 x 50W - 35,300 lux @ 1000mm
BEAM dIAMETEr
LED
3 x 15W - 127mm* @ 600mm
3 x 15W - 132mm* @ 1000mm
3 x 35W - 180mm* @ 1000mm
3 x 50W - 170mm* @ 600mm
3 x 50W - 210mm* @ 1000mm
COLOur TEMPErATurE
700
300°
3 x 15W - 4547°K
Halogen (IRC)
3 x 35W - 3034°K
3 x 50W - 3080°K
3 x 35W - 4059°K
3 x 50W - 4180°K
LED
93
Halogen (IRC) 98
780
1525
2100
600°
LED
LED
Halogen
• Three Metre Power Cord with Hospital Grade Plug.
• Compactfivelegbasewithtwoopposingbraked
wheels for increased stability.
• Heavy duty 75mm dia. wheels are standard.
Note: They are an optional extra on Series 1 model.
35,000 - 50,000 hrs
2,000 - 4,000 hrs
VOLTAGE
LED
Halogen
36 VDC
12 V
WEIGHT (APPrOX.)
Mobile Mount 23 kg
12
71
LUX LEVELS FOR HOSPITAL AND MEDICAL PREMISES
LUX / BCA
PATIENT AREAS
Wards - general
- General lighting
- At bed head
- Examination lighting
- Night lighting
Patients lounges
Wards - infants
- General lighting
- Night lighting
Wards - intensive care and other high dependency areas
- General lighting
- Examination lighting in bedded areas
- Night-watch lighting
LUX
G.I
160
240
320
1
160
D/G
D/G
19
240
10
D/G
-
160
400
10
D/G
C/O
-
PATIENT TRANSIT AREAS
General
Emergency department to operating rooms
160
240
D/G
D/G
PATIENT TOILETS AND SHOWERS
160
-
PATIENT BATHROOMS
160
-
400
320
320
19
19
240
320
19
240
400
D/G
-
400
160
19
22
240
240
D/G
19
240
240/400
400
240
240
D/G
D/G
D/G
D/G
22
TREATMENT AREAS
General area types
- Type A areas
- Type B areas
- Type C areas
Surgical suites
- Operating rooms (see standards for more information)
- Clean-up and scrub-up rooms
Plaster rooms
Recovery rooms
- General
- Examination
Casualty and accident department
- Reception and triage counter
- Waiting room
- Treatment/examination rooms (see type B general areas)
- Operating room (see standards for more information)
Outpatients department
- Consulting/examination rooms (see type C general areas)
- Audiometey (see type C general areas)
- Physiotherapy
- Plaster room
Maternity suites
- Delivery room/birth units (see type A general areas)
- Nurseries
- Normal new born
- High dependency
- Critical care
- Babies wash
- Formula preparation
72
LUX
G.I
20-50
20-50
20-50
19
19
19
50
50
19
19
50
5
5
19
19
19
40
80-240
80-240
16
19
19
LUX / BCA
SPECIAL EXAMINATIONS AND TREATMENT ROOMS
Endoscopic examination
- General lighting (see type A general areas)
- Urology
- Gastroenterology
- Gynaecology
Ophthalmic examination
- General lighting (see type C general areas)
-Refractometry
- Skiascopy
Ophthalmic examination continued
- Ophthalmoscopy
- Perimetry
- Adaptometry
Organ imagery
- General lighting (see type A general areas
- Work at monitor
- Screening
- Viewing and reporting room
- MR scanner room - anaesthetic area (see type A general areas)
Oncology treatment (see type A general areas)
Extracted from LUX booklet, Section 5 - Hospital and Medical Premises.
BCA REQUIREMENTS FOR HOSPITAL AND MEDICAL PREMISES
BCA
REQUIREMENTS
7w/m²
7w/m²
7w/m²
7w/m²
7w/m²
7w/m²
7w/m²
7w/m²
7w/m²
7w/m²
7w/m²
7w/m²
7w/m²
AREA
Entry
Living
Bedroom
- General Living
- Bedside Reading
Corridors and Hallway
Kitchen
- General Area
- Task Area (food prep)
Recreation
Bathroom
- General Area
- Basin/Mirror
73
74
eagle@eaglelighting.com.au
VICTORIA
17-19 Jets Court
Melbourne Airport VIC 3045
P 03 9344 7444
F 03 9344 7433
NEW SOUTH WALES
Unit 4, 21 Mars Road
Lane Cove NSW 2066
P 02 9420 5799
F 02 9420 5988
QUEENSLAND
53 Caswell Street
East Brisbane QLD 4169
P 07 3891 0744
F 07 3891 0755
DISTRIBUTORS - AUSTRALIA
ACT
LITE-TECH AGENCIES
1 Lithgow Street
Fyshwick ACT 2609
P 02 6280 5516
F 02 6280 8635
TASMANIA
SOUTHERN LIGHTING & DISTRIBUTION
34 Federal Street
North Hobart TAS 7000
P 03 6231 5599
F 03 6231 5211
SOUTH AUSTRALIA
H.I. LIGHTING SA PTY LTD
8 Hender Avenue
Magill, SA 5072
P 08 8304 8500
F 08 8304 8501
WESTERN AUSTRALIA
H.I. LIGHTING PTY LTD
111 Broadway
Bassendean WA 6054
P 08 9377 1322
F 08 9377 1761
DISTRIBUTORS - NEW ZEALAND
AUCKLAND
FAGERHULT NEW ZEALAND
Level 1, 18A Neilpark Drive
East Tamaki, Auckland 2013
M +64 21 655 609
M +64 21 509 248
WELLINGTON
M +64 21 597 900
SOUTH ISLAND
P0800 324 374

luminaires for health and aged care

Transcription

Similar documents

Folie 1 - ECO SYSTEMS

University of Stuttgart Corporate Design Manual

Dialog - Corporate Design

BAG-Abrechnung