1412 OE Series Hitch Cover Install (pub.1412cover.ct.141202).indd

SERIES
by
OE Series Super 5th
Hitch Cover Instructions
Part #1412
(fits #1300 & #1400 models)
NOTE: Before proceeding, make sure the hitch height is adjusted to the proper height.
1. Place the hole, located on the back left corner of the hitch cover, over the handle of the hitch.
2. Pull the front and back of the cover snugly over the hitch.
3. Pull the side portions of the cover snugly over the hitch, and make a mark on each side where the Velcro strips on
the cover should be located for a tight fit.
4. Remove the cover.
5. Clean and dry the areas you have marked before attaching the Velcro.
6. Remove the backing to expose the sticky side of the Velcro and position where you made your marks. Be sure the
Velcro is firmly secured.
7. Place the cover back on the hitch.
NOTE: To clean the hitch cover, use mild soap and water with a soft cloth. DO NOT use a brush, harsh chemical
or abrasive. DO NOT scrub the logo area or power wash.
pub.1412cover.ct.141202