Suncore Company Brochure

Suncore USA
Tel: +1- 575-812-8080
Website: http://www.suncoreus.com
E-mail: sales@suncoreus.com
Address: 3825 Academy Pkwy South NE,
Albuquerque, NM, USA
Suncore China
Tel: +86-554-5389998
Fax: +86-554-5389102
Website: http://www.suncorepv.com
E-mail: marketing@suncorepv.com
Address: 188 Taifeng Boulevard, Huainan High-tech
Development Zone Huainan, Anhui province, China.
www.suncorepv.com
www.suncoreus.com
sales@suncoreus.com
Concentrating on a Solar Future
ABOUT
US
Suncore Photovoltaic Technology Company Limited is 100% owned by
Fujian SanAn Group. Headquartered in Huainan, Anhui Province, Suncore
also has 100% owned subsidiaries located in Albuquerque, NM USA, Xining
China, and Xiamen China. Built upon state-of-the-art automated
manufacturing technologies and strong research and development (R&D)
capabilities, Suncore manufactures a complete offering of solar
concentrator solutions for utility-scale, and industrial solar hot water. In
addition to manufacturing, Suncore also provides full Engineering
Procurement and Construction (EPC) services in addition to financing
solutions for solar project development. Full vertical integration as a
technology provider through project development and financing, allows
Suncore to provide exceptionally competitive CPV solutions to its customers and partners worldwide.
With an annual production capacity of more than 300MW, Suncore is
dedicated to providing its clients with high performance, high quality CPV
products and services. Continuous dedication to R&D, Suncore is continually improving CPV system and module efficiency furthering the CPV
competitive advantage in high direct normal irradiance (DNI) regions of the
world.
www.suncoreus.com
P01/P02
Concentrating on a Solar Future
MILESTONE
2013
Golmud 60MW
100%
2010
2008
Generation II
2007
Generation I
Owns
Plant, the
Suncore was
largest one in
established by
the world, was
2013
San’an
Optoelectronics
and Emcore
San’an became
Corporation.
the sole
CPV system
shareholder
was put into
through its
2012
commercial
use.
CPV demo
2004
2002
system
commencement
Emcore.
built up.
automation line
2011
the CASC test.
Relocated to
Huainan, Anhui
San’an solar
Province,
power division
committed to
was formed.
creating the
40% of Suncore
stock owned by
of the first CPV
completed.
purchase of the
Production
successfully
(San’an) passed
Solar cell
CPV Power
in the world;
50MW CPV
power plant in
Golmud
completed.
world-class CPV
manufacturing
base.
www.suncoreus.com
P03/P04
Concentrating on a Solar Future
UTILITY-SCALE CPV
POWER PLANTS
Golden Sun 1.5 MW Commercial Ground and Rooftop CPV system in Xiamen, Fujian Province, China
Golmud60MW
Location: Golmud, Qinghai Province, China
DNI: 4.86 kWh/m2/day
Size: 60 MW
Year of COD: 2013
EVORA 1MW, CPV Ground system, Evora, Portugal
Eubank Landfill Solar Array, 2 MW, Albuquerque, NM, U.S.
Suncore’s Involvement: Developer
Description:
The 60MWac plant Located in the Qinghai province in the northwest of the Peoples Republic of
China. The solar park is located on the Qinghai-Tibet plateau and sits above 9,000ft in altitude.
This plant was developed and is owned and operated by Suncore Photovoltaic Technology Co. Ltd.
Upon commissioning this plant was the largest CPV installation worldwide.
Golmud50MW
Location: Golmud, Qinghai Province, China
DNI: 4.86 kWh/m2/day
Size: 50 MW
Year of COD: 2012
Suncore’s Involvement: Technology Provider
Description:
Located in the Qinghai province in the northwest of the Peoples Republic of China. The solar park
is located on the Qinghai-Tibet plateau and sits above 9,000ft in altitude. The plant was fully
commissioned in November 2012. Suncore's success with this project has encouraged additional
development in the area.
www.suncoreus.com
P05/P06
Concentrating on a Solar Future
CPV SYSTEMS
Utility-ScaleConcentrator
Photovoltaic(CPV)SystemSpecification
The latest Suncore CPV solar system for utility-scale projects has a rated power of 2.336kW. The
Specifications
system was designed for ease of installation and inexpensive operation and maintenance. Modules
can be installed on low profile pedestal 2 axis tracking system which minimize foundation and
installation requirement and allows for optimization of filed packing density with little shadowing.
Peak power (CSTC)
2.336±5% kWp
Tracking accuracy
0.3°
Size (width x height)
5.3mX2.1m
Weight (single system)
650kg
MTBF/MTTF (main parts)
100000 hours
DC efficiency
30.5%
Concentration ratio
625
Modules and motors are easily accessed from the ground, or with a short step ladder, facilitating
easy and cost effective cleaning and maintenance. Each system can be remotely operated and
controlled to ensure maximum availability and perfect tracking.
Features
•
Optimized for low-cost, utility-scale installations
•
CPV modules at 30.5% efficiency with triple junction solar cells
•
Pedestal 2 axis tracking system
•
Online monitoring, control and diagnostic access
•
Easy O&M from the ground with less than 20 man hour per MW
SuncoreIsYourPartnerinSuccess
•
CPV Technology Provider (Utility and Commercial Size Projects)
•
Financing Options for CPV Projects
•
EPC Provider
•
Project Development
•
CPV Component Provider
•
CPVT- Combined Concentrator Solar Thermal and Electric systems
www.suncoreus.com
P07/P08
oncentrating on a Solar Future
LTM
LTMSpecifications
Chart 1
Solar cell type
Triple-junction
GaAs solar cell
Power output
attenuation (25years)
15%
Module model
LTM Alpha
Acceptance
Angle (degrees)
0.8
Dielectric strength
3000VDC
Ice-hail resistance
Comply with IEC standards ,
25mm ice ball at 22m/s
Protection grade
IP67
Concentration ratio
625
Size
2564x1704x109mm
Solar cellsper module
1536
Weight(single module)
145kg
The LTM low profile modules are Suncore’s most cost effective and efficient module to
date.
LTM modules have an efficiency of 30.5% maximizing the ability to convert
sunlight to electricity, making it the ideal choice for the sunniest locations around the
Chart 2
world. The light and thin design allows for increased packing density and reduced
CSOC
CSTC
shipping cost. Modules are easily installed by hand, eliminating the need for large
DNI=900W/m2
DNI=1000W/m2
AM=1.5D
AM=1.5D
installation equipment such as cranes and forklifts.
Test condition
o
Features
o
Tam=20 C
Tc=25 C
Wind speed 2m/s
Wind speed 0
•
Optimized for low-cost, utility-scale installation
•
Light and thin design for easy transportation and installation
Peak power
0.965±5% kWp
1.168±5% kWp
•
Using triple-junction solar cells with rated efficiencies averaging 39%
Voc (nominal)
766.40V
811.20V
•
Large acceptance angle reduces tracker requirements
High-volume fully automated manufacturing
Isc (nominal)
1.8A
1.78A
•
Ump (nominal)
705.6V
746.4V
Imp (nominal)
1.52A
1.48A
Rated operating temperature
-20 C~+50 C
o
o
Power TC
o
-0.165%/ C
www.suncoreus.com
P09/P10
Concentrating on a Solar Future
CPVT:
Z10 COMBINED HEAT & POWER
Z10Specifications
Data
General
Units
Z10
Dishes
EA
1
Total aperture area
m2
12
Tracking technology
Azimuth range
deg
0-360
Elevation range
deg
5-95
Tracking control
CPVT: Z10 demonstration site Golmud China
Electricity
Howitworks
Z10 features one 12m2 collector, mounted on a dual axis tracker that concentrates incoming sunlight onto
a high efficiency multi junction solar cell receiver. The solar cells are coupled to a heat exchanger that
converts concentrated solar flux into electrical power (A) and thermal power (B)
Hotels, Hospitals and resorts
Municipalties and district heating
•
Correctional facilities, Military installations, Dormitories, Gated Communities
•
Industrial process heat: ideal for textile, food and pharmaceutical industry
•
Thermal energy can be used for cooling in addition to desalination and brackish water purification
Physical Dimensions
Benefits
•
Quick payback on investment, typically less than 5 years
•
Minimal balance of system cost required
•
CPVT Combined thermal and electrical solar power
•
Designed for commercial and industrial applications
•
Cell receiver designed for easy upgrade
•
Designed for 20+ years opperational life
•
2-axis high precision tracking mechanism with zero backlash, using performance feedback-driven,
continuous tracking optimization for maximum effectiveness
Peak electrical power (DC)
kWp
2.5 (*)
Operating voltage
VDC
180-200
Peak thermal power
kWp
5.5 (*)
Fluid
(B) 5.5kW thermal energy is pumped through a closed loop system to the various users for applications such as:
•
Sensor-less closed loop
Thermal
(A) 2.5kW DC electrical power from the PV cells
•
2-axis
Water or coolant
Maximum supply temperature
deg C
90
Nominal flow
l/min
14-16
Operating wind speed
km/h
40
Permissible wind speed
km/h
160
Weight
kg
500
Height in stowed position
m
3.80
Height in operation
m
3.67
Compliance
Inverter
Currently undergoing full certification
Mounting ready
Notes: (*) Tested at 1kW/m 2 irradiance.
www.suncoreus.com
P11/P12
Concentrating on a Solar Future
SOLAR RECEIVERS FOR
CPV SYSTEM
Features
•
•
•
Average of 39% cell efficiency under concentrated illumination.
High-speed automated assembly with low labor content, custom receiver designs and
OEM services are available.
Two standard form factors including 5mm x 5mm and 10mm x 10mm. Custom sizes
available upon request.
•
Exceptional thermal performance using high-quality Direct-Bond-Copper(DBC) substrates.
•
Low thermal resistance, low electrical resistance.
•
Annual capacity of more than 300 MW per year.
Type
10mm x 10mm
10 mm
5 mm
CTJ Solar Cells（GaInP/GaInAs/Ge）
Typical efficiency
38.5%, 25°C, AM1.5
Cell active area
1.012cm 2
Substrate
Direct-bond-copper, AlN substrate with Au / Ni surface plating
(copper thickness 0.3mm , AlN thickness 0.63mm)
Bypass diode
15A (Schottky)
Operating temperature
-40°C to 100°C
Max temperature
150 °C
Open circuit voltage
3.20V
Short circuit current
14.5A
5.5mm x 5.5mm
Typical efficiency
39.5%, 25°C, AM1.5
Cell active area
0.303cm 2
Substrate
Direct-bond-copper, Al 2O 3 substrate with Au / Ni surface plating
(copper thickness 0.3mm , Al 2O 3 thickness 0.38mm)
it with state-of-the-art automated packaging technology to create the most efficient
Bypass diode
10A (Schottky)
and reliable CPV receiver for CPV systems. For many years, Suncore has utilized
Operating temperature
-40°C to 100°C
advanced, high-speed test and manufacturing equipment, to produce high-quality
Max temperature
150 °C
Open circuit voltage
3.20V
Short circuit current
4.5A
Suncore’s CPV receivers take the world-class efficiency of CTJ solar cells and combine
receivers to meet the rigorous demands of CPV applications. Suncore has been providing
CPV receivers to some of the world’s leading CPV system manufacturers. Suncore is
dedicated to producing reliable and cost effective components.
www.suncoreus.com
P13/P14