Pulsar FE Brochure
Transcription
Pulsar FE Brochure
T D AN EW R LI N DA MP HE AN CO H T ST 37 IT N 0 W EA 14 OP EN R EU Heating / Air Conditioning Pulsar P.FE Radiant Panel Quality management systems ISO 9001 – Cert. n° 0545/5 ENVIRONMENTAL COMFORT H eating A i r Conditioning ENVIRONMENTAL COMFORT CONTENTS • • • • • • • • • • • • • • • • Introduction Main advantages Technical specifications Mean surface temperature Lowest water flow – Version P.FE/W.FE Pressure drop – Version P.FE/W.FE Water connection diagram Operating limits Suggested lowest installation height Table of possible combinations Possible connection Accessories Hanging systems Non-active aesthetic panel – Version P Non-active aesthetic panel – Version W Pulsar with perforated panel Page Page Pages Page Page Page Page Page Page Page Page Pages Page Page Page Pages 3 4 5 / 21 21 22 22 23 24 24 24 25 26 / 27 28 29 29 30 The descriptions and illustrations provided in this publication are not binding: Sabiana reserves the right, whilst maintaining the essential characteristics of the types described and illustrated, to make, at any time, without the requirement to promptly update this piece of literature, any changes that it considers useful for the purpose of improvement or for any other manufacturing or commercial requirements. Introduction Pulsar SABIANA is the leading company in Europe in the design, production and sale of radiant panels operating on hot water, high temperature hot water and steam. Since 1971, over 5 million square metres of panels installed in different environments (small, medium and large industries, hangars, gyms and theatres, small and large offices) prove the quality of the SABIANA radiant heating system and products. Heat by radiation means absolute silence, no movement of air and a uniform temperature in the entire environment. In effect, being distributed better, the heat is more pleasant and comfort is optimised, without increasing the air temperature. The result is a feeling of absolute comfort with an air temperature that is 3°C lower than the operative temperature perceived by people. The efficiency of the SABIANA radiant panels is also economic. In fact, besides the energy savings due to the fact that the operative temperature is different from the air temperature, this totally static product does not, unlike the traditional systems, have an electric motor and does not require maintenance nor the consumption of electricity. This translates into long-lasting efficiency. The SABIANA radiant panels have a practically unlimited duration. The SABIANA radiant panels can be described as the hygienic heating system par excellence. The system does not create noise nor movement of air and therefore dust. In addition, it avoids annoying streams of air and the circulation of germs, dust and fragrances and thus represents an important contribution to the prevention of allergies and illnesses. 3 Main advantages Pulsar Thermal performance - The Pulsar radiant panel is totally static (no circulation of air and no movement of dust). Very low thermal gradient between the floor and the ceiling. Extremely fast response to changes in settings, without thermal inertia. The operating principle of Pulsar radiant panels is reversible, and thus cooling operation is possible using the radiant ceiling panels, by connection to a chiller or heat pump. Appearance - None of the peripheral walls are affected by the installation. The Pulsar radiant panel can be perfectly integrated into all types of false ceiling. The visible side is perfectly smooth, adapting to any type of architecture. Other RAL colours available on request. Modularity - Given its modular dimensions and the design of the water connections, Pulsar panels can be installed in sequence with ceiling light panels, in complete compliance with the regulations on artificial lighting. Version P.FE installed within false ceiling Hygiene - The design of the Pulsar panel allows it to be installed in any building, including hospitals and clinics. Indeed, its completely smooth visible surface is recommended, as it allows sanitisation by spraying for combating nosocomial illnesses in hospitals. - The radiation concept, by avoiding considerable movements of air, prevents the spreading of microbes and bacteriological pollution. Safety - Pulsar radiant panels are inaccessible to the people in the room. Therefore there is no risk of burning or electric shock in schools and paramedical environments. - No risk of vandalism, in any environment. Version W.FE free hanging Comfort - By design, the Pulsar radiant panel guarantees a uniform temperature in all seasons. - The Pulsar radiant panel is a totally static heating system without the circulation of air and without lifting dust. - The operation of Pulsar is completely silent. - In summer, the Pulsar panel can be used for cooling without creating steams of air and with a uniform temperature throughout the environment. Savings - The heating requirement of a building heated with Pulsar radiant panels is, according to the EN 12831 standard, much lower than the requirement with traditional heating systems. - The experience acquired by SABIANA in the field of radiant panels guarantees the reliability of Pulsar over time. - Pulsar does not require special maintenance and consequently has no maintenance costs. Version R.FE for plasterboard ceilings Assembly - The dimensions of Pulsar radiant panels make them easy to handle on site. - The panels are connected by flexible pipes without welding. CONNECTIONS SUPPLIED NOT MOUNTED 4 Technical specifications Pulsar Technical description SABIANA Pulsar radiant panels are supplied in four sizes, which can be perfectly integrated into any false ceiling. Indeed, the lengths of 1.20, 1.80, 2.40 and 3.00 m ensure optimum integration into 600 x 600 mm modular ceilings, the standard dimension for false ceiling panels in Europe. The visible side is perfectly flat, meaning that Pulsar radiant panels can match all types of false ceiling panels available on the market. As standard, the panels are supplied in RAL 9016 colour, with a satin finish created by an epoxy-polyester coat dried in a furnace at 180°C. Other RAL colours are also available for the architect to choose from. The Pulsar radiant panels are made of a radiating galvanized steel plate, 1 mm thick. On the panel is fixed a galvanized steel pipe with 15 mm of external diameter, 1.2 mm thick. Shaped tube The galvanized omega strips welded to the panels hold the correct spacing of the tubes and secure the best surface contact between the tube and the panel. The paint complies with the European Standard 76/769/EEC. Omega strips Panel Class of reaction to fire: A1 Emission of the radiant surface: ǔ = 0,96 The Pulsar is supplied with an insulating layer of mineral wool (30 mm thick) protected by an aluminium sheet (25 micron thick) to be mounted on the top of the panel. Insulation specifications: Class A1 according to EN 13501-1 standards Thermal conductivity 0,037 W/mK (according to UNI CTI 7745 and UNI FA 112 standard) Density 14 kg/m3 Thermal resistance 0,81 m2K/W Vers io Vers io n P. FE nW .FE Vers io n R. FE X Insulation, 30 mm thick (supplied not mounted) X Insulation holding strip 5 Pulsar Technical specifications Pulsar P.FE installed within false ceilings Weights and Dimensions Pulsar P STANDARD Size 1 15 565 1195 A B 15 A B A A 595 B A 1795 35 60 565 595 60 595 15 15 60 Size 3 B A 15 565 2395 A B 595 A 2395 565 15 60 595 60 35 15 A 6 565 60 35 15 1795 595 1195 A 15 A 565 B 15 A Size 2 15 15 Pulsar Technical specifications Pulsar P.FE installed within false ceilings Weights and Dimensions Pulsar P STANDARD Size 4 B A 15 565 595 2995 A 15 B A 2995 565 15 60 595 60 35 15 A Installation with CLIP B A HANGING VERSION SIZE P.FE 1 2 3 4 MODEL P.FE P.FE P.FE P.FE 1 2 3 4 CODE 0084001 0084002 0084003 0084004 LENGTH (mm) 1195 1795 2395 2995 BRACKETS WITH A 175 175 415 565 (mm) CLIP: B 845 1445 1565 1865 WEIGHT (kg) 13,8 20,7 27,6 34,5 WATER CONTENT (l) 1,3 2,0 2,8 3,5 7 Pulsar Technical specifications Pulsar P.FE installed within false ceilings Weights and Dimensions Pulsar PA Size 1 15 565 1195 A B 15 A B A A 595 B A 1795 35 60 565 595 60 595 15 15 60 Size 3 B A 15 565 2395 A B 595 A 2395 565 15 60 595 60 35 15 A 8 565 60 35 15 1795 595 1195 A 15 A 565 B 15 A Size 2 15 15 Pulsar Technical specifications Pulsar P.FE installed within false ceilings Weights and Dimensions Pulsar PA Size 4 B 15 A 565 595 2995 A 15 B A 2995 565 15 60 595 60 35 15 A Installation with CLIP B A HANGING VERSION SIZE PA.FE 1 2 3 4 MODEL PA.FE PA.FE PA.FE PA.FE 1 2 3 4 CODE 0084011 0084012 0084013 0084014 LENGTH (mm) 1195 1795 2395 2995 BRACKETS WITH A 175 175 415 565 (mm) CLIP: B 845 1445 1565 1865 WEIGHT (kg) 13,8 20,7 27,6 34,5 WATER CONTENT (l) 1,3 2,0 2,8 3,5 9 Pulsar Technical specifications Pulsar P.FE installed within false ceilings Weights and Dimensions Pulsar PB A B 15 565 1195 B A A 1195 595 B A 1795 35 60 565 595 60 595 15 15 60 Size 3 B A 15 565 2395 A B A 35 15 60 595 565 60 2395 595 15 A 10 565 60 35 15 1795 595 B A 565 A A 15 15 A Size 2 15 Size 1 15 15 Pulsar Technical specifications Pulsar P.FE installed within false ceilings Weights and Dimensions Pulsar PB Size 4 B 15 A 565 595 2995 A 15 B A 2995 15 60 595 565 60 35 15 A Installation with CLIP B A HANGING VERSION SIZE PB.FE 1 2 3 4 MODEL PB.FE PB.FE PB.FE PB.FE 1 2 3 4 CODE 0084021 0084022 0084023 0084024 LENGTH (mm) 1195 1795 2395 2995 BRACKETS WITH A 175 175 415 565 (mm) CLIP: B 845 1445 1565 1865 WEIGHT (kg) 13,8 20,7 27,6 34,5 WATER CONTENT (l) 1,3 2,0 2,8 3,5 11 Pulsar Technical specifications Pulsar W.FE free hanging Weights and Dimensions Pulsar W STANDARD Size 1 7.5 595 1234 A B 7.5 B A A A 610 B A 1858 35 68 595 610 68 610 7.5 7.5 68 Size 3 B A 7.5 595 2482 A B 610 A 2482 595 7.5 68 610 68 35 7.5 A 12 595 68 35 7.5 1858 610 1234 A 7.5 A 595 B 7.5 A Size 2 7.5 7.5 Pulsar Technical specifications Pulsar W.FE free hanging Weights and Dimensions Pulsar W STANDARD Size 4 B A 7.5 595 3106 A 7.5 610 B A 3106 595 7.5 68 610 68 35 7.5 A Installation with CLIP B A HANGING VERSION SIZE W.FE 1 2 3 4 MODEL W.FE W.FE W.FE W.FE 1 2 3 4 CODE 0084251 0084252 0084253 0084254 LENGTH (mm) 1234 1858 2482 3106 BRACKETS WITH A 175 175 445 595 (mm) CLIP: B 884 1508 1592 1916 WEIGHT (kg) 13,8 20,7 27,6 34,5 WATER CONTENT (l) 1,3 2,0 2,8 3,5 13 Pulsar Technical specifications Pulsar W.FE free hanging Weights and Dimensions Pulsar WA Size 1 7.5 595 1234 A B 7.5 B A A A 610 B A 1858 35 68 595 610 68 610 7.5 7.5 68 Size 3 B A 7.5 595 2482 A B 610 A 2482 595 7.5 68 610 68 35 7.5 A 14 595 68 35 7.5 1858 610 1234 A 7.5 A 595 B 7.5 A Size 2 7.5 7.5 Pulsar Technical specifications Pulsar W.FE free hanging Weights and Dimensions Pulsar WA Size 4 B A 7.5 595 3106 A 7.5 610 B A 3106 595 7.5 68 610 68 35 7.5 A Installation with CLIP B A HANGING VERSION SIZE WA.FE 1 2 3 4 MODEL WA.FE WA.FE WA.FE WA.FE 1 2 3 4 CODE 0084261 0084262 0084263 0084264 LENGTH (mm) 1234 1858 2482 3106 BRACKETS WITH A 175 175 445 595 (mm) CLIP: B 884 1508 1592 1916 WEIGHT (kg) 13,8 20,7 27,6 34,5 WATER CONTENT (l) 1,3 2,0 2,8 3,5 15 Pulsar Technical specifications Pulsar W.FE free hanging Weights and Dimensions Pulsar WB Size 1 A 7.5 595 1234 B 610 B A B A 7.5 7.5 68 68 610 595 610 68 35 Size 3 B A 7.5 595 2482 A B A 35 7.5 68 595 610 68 2482 610 7.5 A 16 595 610 1858 68 35 7.5 1858 A 1234 A 595 A A 7.5 7.5 B 7.5 A Size 2 7.5 7.5 Pulsar Technical specifications Pulsar W.FE free hanging Weights and Dimensions Pulsar WB Size 4 B A 7.5 595 3106 A 7.5 610 B A 3106 7.5 68 595 610 68 35 7.5 A Installation with CLIP B A HANGING VERSION SIZE WB.FE 1 2 3 4 MODEL WB.FE WB.FE WB.FE WB.FE 1 2 3 4 CODE 0084271 0084272 0084273 0084274 LENGTH (mm) 1234 1858 2482 3106 BRACKETS WITH A 175 175 445 595 (mm) CLIP: B 884 1508 1592 1916 WEIGHT (kg) 13,8 20,7 27,6 34,5 WATER CONTENT (l) 1,3 2,0 2,8 3,5 17 Pulsar Technical specifications Pulsar R.FE for plasterboard ceilings Weights and Dimensions Pulsar R STANDARD Size 1 1195 A 30 100 35 P 30 P Ø8 P Ø8 Ø8 Ø8 565 595 595 Ø8 30 30 15 60 100 60 100 Ø8 Size 3 B A 15 565 2395 B A 2455 2395 30 P 30 P Ø8 P Ø8 100 Ø8 35 60 100 Ø8 P 30 A 595 15 A Ø8 565 595 655 Ø8 15 30 60 100 Ø8 18 35 15 15 655 60 100 Ø8 100 Ø8 100 565 A 1855 1795 100 Ø8 15 P Ø8 15 595 B 30 30 P Ø8 A 1795 A 1255 1195 100 B 595 B 30 A 60 100 A 15 15 565 565 15 30 A B 655 A Size 2 15 Pulsar Technical specifications Pulsar R.FE for plasterboard ceilings Weights and Dimensions Pulsar R STANDARD Size 4 B A 15 565 595 2995 B A 3055 2995 30 100 P P Ø8 30 P Ø8 P Ø8 P Ø8 100 Ø8 35 60 100 Ø8 30 A 15 15 A 565 595 655 Ø8 VERSION SIZE R.FE 1 2 3 4 MODEL R.FE R.FE R.FE R.FE 1 2 3 4 CODE LENGTH (mm) 0084041 0084042 0084043 0084044 1195 1795 2395 2995 HOLES P 527,5 551,5 564,0 571,0 N° OF P 2 3 4 5 15 30 60 100 Ø8 WEIGHT (kg) 14,9 22,3 29,7 37,1 WATER CONTENT (l) 1,3 2,0 2,8 3,5 19 Pulsar Technical specifications Emission Characteristic curve of the Pulsar taken from tests carried out as per the EN 14037 standard: Q = K • (ΔTm)n Q K ΔTm = difference between the mean water temperature and the room temperature n = heating exponent of the unit = 1,1536 = emission W/m = heating coefficient of the unit = 3,28086 W/m The emission of the Sabiana Pulsar radiant panels has been certified by the laboratory at the University of Stuttgart H.L.K. applying the harmonised European Standard EN 14037, with the report number DC210 D12.2956 Example: Nominal emission for a meter of Pulsar panels with ΔTm = 55°C : 334 W/m Total nominal emission of Pulsar panels with ΔTm = 55°C Pulsar 1 Pulsar 2 Pulsar 3 Pulsar 4 W = 396 W = 596 W = 797 W = 997 EN 14037 Ceiling radiant panels Pulsar P.FE thermal emissions in accordance with the European Standard EN 14037-1 ΔTm Emission ΔTm Emission ΔTm Emission ΔTm Emission ΔTm Emission °C W/m 582 574 567 559 552 544 537 529 522 515 507 500 492 485 °C W/m 478 470 463 456 448 441 434 427 419 412 405 398 391 383 °C W/m 376 369 362 355 348 341 334 327 320 313 306 299 292 285 °C W/m 279 272 265 258 251 245 238 231 225 218 211 205 198 192 °C W/m 33 32 31 30 29 28 27 26 25 24 23 22 21 20 185 179 172 166 160 153 147 141 134 128 122 116 110 104 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 Δtm = difference between the average water temperature and the room temperature. 20 Pulsar Technical specifications Pulsar P.FE cooling emissions in accordance with the European Standard EN 14037-4 COOLING Δtm EMISSION With insulation °C W/m W/m 5 6 7 8 9 10 11 12 13 14 15 24 29 35 40 46 52 57 63 69 75 81 40 49 58 68 77 87 96 106 116 126 136 Without insulation 2 W/m W/m2 33 40 48 55 62 70 78 85 93 101 108 56 68 80 92 105 118 130 143 156 169 182 Example: Water temperature 17/21°C, air temperature 28°C - 50% means Δtm = 9°C. The cooling emission of the Pulsar is 46 W/m. Δtm = difference between the average water temperature and the room temperature. Pulsar surface temperature °C Mean surface temperature Mean water temperature °C 21 Pulsar Lowest water flow – Version P.FE/W.FE Lowest water flow to be supplied in order to obtain the correct emission. Leaving water temperature °C 40 60 70 80 Lowest water flow l/h 53 41 36 32 Pressure drop – Version P.FE/W.FE Entering water temperature = 40°C 16 53 P.4 14 Pressure drop (kPa) 1 0,5 12 P.3 10 P.2 8 P.1 6 4 2 40 50 60 70 8 0 0 50 100 150 200 250 300 Water flow (l/h) Entering water temperature = 60°C 16 41 14 Pressure drop (kPa) 1 0,5 P.4 12 P.3 10 P.2 8 P.1 6 4 2 30 40 50 60 0 0 50 100 150 200 250 300 Water flow (l/h) Entering water temperature = 70°C 14 P.4 36 12 Pressure drop (kPa) 1 0,5 P.3 10 P.2 8 P.1 6 4 2 20 30 40 50 60 0 0 50 100 150 200 250 300 Water flow (l/h) Entering water temperature = 80°C 14 P.4 32 12 Pressure drop (kPa) 1 0,5 P.3 10 8 P.2 6 P.1 4 2 20 30 40 50 0 0 50 100 150 Water flow (l/h) 22 200 250 300 Pulsar Water connection diagram Ta Regulation with constant water flow and modulating temperature 1st SOLUTION Precise regulation Ta Regulation with modulating water flow and constant temperature 2nd SOLUTION ON/OFF T EXT. Other circuits Circuit with constant water flow and modulating temperature Connection in series Connection in parallel Y PPL SU URN RET LY PP SU RN TU RE 23 Pulsar Operating limits Water circuit Maximum entering water temperature: +90°C Suggested lowest installation height (in m above the floor) Maximum water temperature °C m 50 60 70 80 90 2,5 2,7 2,9 3,1 3,3 Table of possible combinations P MODEL Total length (m) Composition without intermediate panel Composition with intermediate panel ( ) 1,20 1,80 2,40 3,00 3,60 4,20 4,80 5,40 6,00 6,60 7,20 8,40 9,00 P.1 – P.2 – * P.3 – P.4 P.1 + Panel 600 x 600 (mm) + P.1 2 x P.2 – P.2 + P.3 P.2 + Panel 600 x 600 (mm) + P.2 2 x P.3 – P.3 + P.4 or 3 x P.2 P.3 + Panel 600 x 600 (mm) + P.3 2 x P.4 – 2 x P.3 + 1 x P.2 P.4 + Panel 600 x 600 (mm) + P.4 3 x P.3 – 2 x P.4 + 1 x P.3 P.3 + Panel 600 x 600 (mm) + P.3 + Panel x 600 (mm) + P.3 3 x P.4 – W MODEL Total length (m) Composition without intermediate panel Composition with intermediate panel ( ) 1,20 1,80 2,40 3,00 3,60 4,20 4,80 5,40 6,00 6,60 7,20 8,40 9,00 W.1 – W.2 – * W.3 – W.4 W.1 + Panel 600 x 600 (mm) + W.1 2 x W.2 – W.2 + W.3 W.2 + Panel 600 x 600 (mm) + W.2 2 x W.3 – W.3 + W.4 or 3 x W.2 W.3 + Panel 600 x 600 (mm) + W.3 2 x W.4 – 2 x W.3 + 1 x W.2 W.4 + Panel 600 x 600 (mm) + W.4 3 x W.3 – 2 x W.4 + 1 x W.3 W.3 + Panel 600 x 600 (mm) + W.3 + Panel 600 x 600 (mm) + W.3 3 x W.4 – Longer length possible according to suitable Δp 24 Pulsar Possible connections Connection in series without intermediate panel Accessory: TB–466 flexible pipe with intermediate panel ( ) * Accessory: TC–1550 flexible pipe Connection in parallel with or without intermediate panel ( ) ( lower water flow for panel) * ( ) This may be a false ceiling panel, a light or one of the Pulsar non-active aesthetic panels * 25 Pulsar Accessories FITTINGS Pressfittings (GEBERIT) Code 9084407 1 2 PIPE FITTING Pulsar PANEL 1/2” PIPE FITTING Pulsar PANEL Screw fittings (CALEFFI) – Torque: 25 Nm - Black O-ring only Code 9084408 FITTING 1 PIPE PIPE Pulsar PANEL NOTE: two kits of fittings must be used for PA, PB, WA and WB panels (1 kit = 2 fittings). 26 2 FITTING Pulsar PANEL Pulsar Accessories Flexible pipe compliant with CSTB standard - Diameter 1/2” - Made of: EPDM rubber - With external AISI 304 stainless steel layer - Operation between -15°C and +90°C Straight flexible pipe – 1/2” female fittings FLEXIBLE PIPE CODE LENGTH (mm) 6084010 350 IDENTIFICATION L TA–370 90° flexible pipe – 1/2” female fittings FLEXIBLE PIPE CODE LENGTH (mm) 6084011 350 IDENTIFICATION TB–466 L 90° / Straight flexible pipe – 1/2” female fittings FLEXIBLE PIPE LENGTH (mm) 850 1450 2000 CODE IDENTIFICATION 6084012 6084014 6084015 TC–950 TC–1550 TC–2100 For panels in series L Assembly of 2 Standard Pulsar Assembly of 3 Standard Pulsar (for connections up to 2 m) TB TB TC TC Assembly of several PA / WA and PB / WB panels in series TB TA 27 Pulsar Hanging systems Hanging brackets Versions P and W A B A E D L E C with clip Model L (mm) A (mm) B (mm) C (mm) D (mm) E (mm) P.1 P.2 P.3 P.4 W.1 W.2 W.3 W.4 1195 1795 2395 2995 1234 1858 2482 3106 175 175 415 565 175 175 445 595 845 1445 1565 1865 884 1508 1592 1916 595 595 595 595 610 610 610 610 565 565 565 565 595 595 595 595 15 15 15 15 7,5 7,5 7,5 7,5 The maximum vertical bending f of the Pulsar radiant panels between two suspension points is less than 2 mm. Suspension kits Installation with CLIP KIT CODE KIT CODE KIT CODE KIT-A 9084411 KIT-T 9084412 KIT-TM 9084413 WIRE LENGTH 1 2 (m) KIT CODE WIRE KIT-TC1 9084414 KIT-TC2 9084415 28 B B LENGTH 1 2 (m) KIT CODE KIT-C1 9084416 KIT-C2 9084417 Pulsar Non-active aesthetic panel – Version P The aesthetic panels are used when the active panels do not need to be installed and when, for aesthetic reasons or local specifications, a non-active panel has to be installed to complete a strip. Available in 2 models: SIZE LENGTH (mm) CODE 1 2 595 1195 9084420 9084421 Can be cut to measure on site. 600 non-active panel 1200 non-active panel 1195 595 35 147.5 300 600 147.5 475 595 11 60 35 Ø1 60 11 2 Hanging holes on the lateral sides of the panel. Non-active aesthetic panel – Version W The aesthetic panels are used when the active panels do not need to be installed and when, for aesthetic reasons or local specifications, a non-active panel has to be installed to complete a strip. Available in 2 models: SIZE LENGTH (mm) CODE 1 2 610 1234 9084430 9084431 Can be cut to measure on site. 600 non-active panel 1200 non-active panel 1234 610 35 300 600 167 13.5 610±1 Ø6 610±1 13.5 Ø6 167 610 35 Ø6 105 100 100 100 100 105 Hanging holes on the lateral sides of the panel. 29 Pulsar Pulsar with perforated panel Special version with perforated panel: it is supplied with extra thermal acoustic insulation, which allows the attenuation of noise reverberation in the room. Weights and dimensions like Standard panel. Sound absorption coefficient 1,00 0,90 0,80 0,70 _ 0,60 0,50 0,40 0,30 0,20 0,10 0,00 100 200 300 500 1000 Fréquence (Hz) _= Sound absorption coefficients 30 2000 3000 5000 10000 Pulsar 31 Heating / Air Conditioning ENVIRONMENTAL COMFORT Sabiana s.p.a. • via Piave, 53 • 20011 Corbetta • Milano • Italy • phone +39.02.97203.1 r.a. / +39.02.97270429 / +39.02.97270576 fax +39.02.9777282 / +39.02.9772820 • www.sabiana.it • info@sabiana.it E/02/14 COD. A4830100 PULSAR - EX - 02/14 Pulsar P.FE Radiant Panel
Similar documents
Pulsar Radiant Panel
The descriptions and illustrations provided in this publication are not binding: Sabiana reserves the right, whilst maintaining the essential characteristics of the types described and illustrated,...
More informationPolaris - Sabiana
Relative Humidity 55% Water temperaturea 11/15°C - Entering air temperature 28°C
More information