BLUEJACKET

Having trouble viewing this email?Click here
You're receiving this email because of your relationship with BlueJacket Shipcrafters, Inc..
You may unsubscribe if you no longer wish to receive our emails.
June 2014
Vol 4, Issue 6
ShipShape
News,Tips and Happenings
In This Issue
Nautical Terms
Dear Shipmate:
Model of the month
Something Fun
Finally it is June, and we open our doors on Saturdays from 9
to 5 starting next week. After this long winter, the warmer
weather is appreciated.
NEW RIGGING THREAD AVAILABLE
Tip of the Month
final message
Quick Links
Visit BlueJacket's website
We have found thinner all cotton thread only .005 inches in Download our Catalog
diameter. This scales out to 1/2 inch line at 1:96 scale, which
is exactly ratline size for our new Kearsarge and Alabama Join our Mailing List!
kits. We are making this line available now in 25 yard spools:
Black # R1667 $2.10
White # R1668 $2.10
Natural #R1669 $2.10
"Like" us on
Facebook to
get the latest
information
on kits,
products, and news! We
keep you informed on
the weekly happenings
at Bluejacket and
encourage our fans to
share photos, stories,
and tips of their
experiences. Please join
us!
All 3 items are in stock. In addition to ratlines, this thread is
perfect for tying off blocks, whipping line ends, lashing and
serving.
NEW CLASS - PLANKING BULKHEAD HULLS
The dates are not set yet, but will be either late September or
early October, which is a beautiful time of year in Maine. It
will be a Monday to Friday event, as was the rigging class
this past spring.
Watch for a separate announcement in a week or two.
Nautical terms and origins
Agonic Line - A line of points on a chart at which there is no magnetic compass variation.
The word comes from the Greek agonos, meaning no angle.
Buy Ballot's Law - A rule-of-thumb for determining variants of atmospheric pressure of a
storm condition and of the location or direction of a storm center. It is named for a Dutch
scientist.
Jury - A temporary or makeshift arrangement of an of a vessel's gear due to damage,
such as a jury rudder. There are several possibilities for a derivation: one an Old French
word, jornal, or jurnal, for the day, implying temporary; another, also Old French, ajuirer, to
help, and this one goes back to Latin, adiutare, aid.
Skeg - Any of a variety of structures on a hull's bottom at or near the stern. Earlier skegg,
the word appears to come intact from Old Norse.
Information is from the book "Origins of Sea Terms" by John G. Rogers
copyright 1985 Mystic Seaport Museum, Inc. and available from BlueJacket.
Model of the Month - Yacht America - kit # K1050
The Yacht America was launched in 1851 from New York, and crossed the Atlantic Ocean
to compete against the entire Royal Yacht squadron of England in what was called the
"One Hundred Guinea Cup". The race occurred on August 22 of that year (my birthdate!)
The race started at 10.00 AM with 7 schooners and 8 cutters. The course was 53 miles
long around the Isle of Wright, and the America had a late start due to a fouled anchor.
However, within a half hour, she was in 5th place and gaining. Later in the race, her jib
boom broke, but was replaced in 15 minutes. The race ended at 6.00 PM with America 18
minutes ahead of her closest competitor. Queen Victoria supposedly was watching the
race and asked "Who was second?" and was answered by the now famous reply "There is
no second, your Majesty." The race was re-named the "America's Cup" in honor of her
victory.
Our model is a true plank-on-frame construction so the modeler can show internal details,
and uses basswood, mahogany, spruce, and Britannia metal fittings.
Modeler Bill H. of Connecticut sent us some photos and description of his construction of
the Yacht America. In his own words;
"I started building wood ship models almost 40 years ago and have built about a dozen
models over that time, most of which I have sold or gifted. I am mostly a kit-basher but
have attempted a couple of scratch builds. Retirement has finally given me the time to
work on improving my craft.
America is pretty much a straight out of the box build. I tree-nailed the decking,
supplemented the kit's wood with a little extra mahogany from my scrap box, and added a
few minor details. I like to leave my work unpainted, and the fine quality of the wood in
this kit made this possible. I added sails because, to me, the model looked naked without
them.
I am very pleased with this kit, and hope to tackle more of your inventory in the future.
Regards,
Bill
Loading a Coastal Schooner
I received this interesting photo and information from my sister's brother-in-law, Joe V. in
Virginia.....
Nic
I was scanning some old photos the other day to save them before they fade even more
and came across this one that might be of interest to you. My grandfather took it probably
on Long Island Sound near Wading River NY.
How do you load a costal schooner... right off the coast of course...
Joe
Even more interesting is Joe was able to enhance the photo and get the name of the
schooner "Olive Leaf" and found a newspaper story of the demise of the schooner. Look at
the 4th paragraph up from the end of the article:
So I looked up the weather near that date, and found this on www.history.com:
"Nov 26 1898
A powerful early winter storm batters the New England coast on this day in 1898, killing at
least 450 people in New York, Connecticut and Massachusetts.
It was Thanksgiving Day when strong winds, in excess of 40 miles per hour, began
blowing from the Atlantic Ocean across the New England coast. This was followed, in
short order, by gales from the other direction. Equally strong winds roared across upstate
New York from the west.
Blizzard conditions disrupted the entire area. Transportation became impossible; some
trains were halted by 20-foot snow drifts. Communication was interrupted as the wind and
snow brought down telephone and telegraph lines. In some towns and villages, residents
were forced to dig tunnels through the snow from their front doors to the streets. In New
York City, 2,000 workers attempted to clear the key streets and avenues.
Boston was perhaps worst hit by the storm. Approximately 100 ships were blown ashore
from the city's harbor and another 40 were sunk. About 100 people died when a
Portland-based steamer sank near Cape Cod. Bodies and debris filled the harbors and
nearby beaches.
The storm is thought to have killed at least 450 people, though due to the wide extent of
the storm and the poor record-keeping of the time, it is impossible to determine exactly
how many people died."
As a footnote to this tragic event: on that same evening in the icy waters of the Atlantic off
the Massachusetts coast, the 280-foot-long steamship Portland - also known as "The
Titanic of New England" - was also lost with all passengers and crew. Portland was one of
the most luxurious coastal steamships of its day, and, today we memorialize her with
an exquisitely detailed BlueJacket kit.
Something fun
Trivia fact: The first 5 days after the weekend are the hardest.
Tip of the Month - rigging deadeyes
I need to thank Dan Pariser of the Shipcraft Guild of New York for being a contributing
editor by providing this excellent article.
Deadeyes, which tension the shrouds that support the masts, are an important structural
and visual element in the rigging of a model ship. When they are neat and shipshape they
give proof that the modeler has top notch skills and knowledge. Good quality line has to be
used for the shrouds and accurately sized and shaped deadeyes have to be made or
bought, but the techniques of properly setting them up are just as important.
In the first drawing you can see how the deadeyes are set in two parallel lines with their
faces all turned out. To get this effect there are two techniques to learn. First, there is the
lacing of the lanyard through the paired holes as shown in the second drawing. This is
pretty straightforward. The trick is to get the two lines of deadeyes to set up parallel.
Here is a simple tool that can help. The Deadeye Claw is made from stiff wire, such as a
paper clip. Two pieces are twisted together in such a way as to leave two 'claws' on each
end. Fit the lower claws into the holes of a lower deadeye, then fit the upper deadeye to
the remaining claws. Now wrap the shroud around the upper deadeye and back up. Attach
it to itself with several seizings and you can remove the Claw. Lace the lanyard and you
are done. Using the Claw on all the deadeye pairs will give you a consistent distance
between them and the neat and shipshape look that everyone will appreciate.
Thanks for your support
My final message in this newsletter will always be the same because it is what
BlueJacket has done for 109 years, and we're not about to stop.
We appreciate our customers, we exist for our customers, and we listen to our
customers. What we do is fun, just as I will try to make this newsletter. If you have
any suggestions or comments, still, as always, please just give us a shout!
There's nothing I'd rather do than work on, or talk about model boats. Have fun!
Sincerely,
Nic Damuck
BlueJacket Shipcrafters, Inc.
Forward email
This email was sent to wdamuck@comcast.net by nic@bluejacketinc.com |
Update Profile/Email Address | Instant removal with SafeUnsubscribe™ | Privacy Policy.
BlueJacket Shipcrafters, Inc. | 160 East Main Street | Searsport | ME | 04974