panel systems - Dilution Solutions

Transcription

Why This Catalogue?
You are already aware of Dosatron’s superior chemical injectors, but you might not have
realized we also offer a full range of chemical delivery systems. Browse our catalogue for
supplies chosen to maintain and enhance your Dosatron installations.
Contents
•
Mobile Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 4
•
Proportioners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
•
Mix-Mate Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 7
•
Installation Ready Systems - Panel Systems . . . . . . . . . . . . . . . . . . 8 - 11
•
Installation Ready Systems - Cabinet Systems . . . . . . . . . . . . . . . . 12 - 13
•
Dosatron Installation Accessories . . . . . . . . . . . . . . . . . . . . .
•
Service and Maintenance Accessories . . . . . . . . . . . . . . . . . . . . 24 - 25
•
Meters and Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
•
Etatron Electric Chemical Dosing Pumps . . . . . . . . . . . . . . . . . . . . 27
•
Applicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
•
Foam Up Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 31
•
Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
•
Suction Hose Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
•
Product Spotlight - Ultra Lean Dilution System . . . . . . . . . Back Inside Cover
www.dosatronusa.com
5
14 - 23
28 - 29
32 - 34
Providing the best chemical delivery
solutions and products possible.
We Are Here
to
Help
Call 800-523-8499 any time between
8:30 a.m. and 5:00 p.m. EST to speak
directly with one of our knowledgeable
customer service representatives.
Come Visit Us
in
Florida
We offer training to become a “Certified
Dosatron Technician” at our service center
in Clearwater, Florida. We also offer on-site
training and workshops at your facility. To
sign up or learn more about our training
options call 800-523-8499.
Need Maintenance?
Send Us Your Injector
Dosatron provides technical service
and equipment maintenance at our
repair center located in Clearwater,
Florida. If your Dosatron needs servicing,
scan the QR code in the box with your
smart phone and complete the form or
call 800-523-8499 to receive a return
authorization number and mailing
instructions. We are ready to help.
User Friendly Website
If you are looking for a list of Dosatron Best Practices, a chart that shows what is the correct
Click Rate for your Dosatron, or the location of the Serial Number on your injector, go to our
website at www.dosatronusa.com. Click the Technical Support menu tab and then click on
Technical Documents. Here is where you will find the answers to those questions and much,
much more.
Call Now! 1-800-523-8499
1
Mobile Solutions
Our mobile and portable
solutions provide . . .
Proportional, on-demand dispensing
from horticulture to sanitation and
everything in between.
The carts are designed for maximum
mobility and the cart Hook-Up Kit
makes attaching your Dosatron a snap.
Our carts are perfect for . . .
Carwash
•
•
Mobile bug and tire treatment
Portable tar cleaning
Food Processing
•
•
Portable Peracetic Acid
(PAA) applicator
Mobile sanitation cart
Metal Processing
•
Portable coolant fill station
Livestock
•
•
Truck disinfection
Mobile biofilm sanitizing
Horticulture
•
•
•
2
Mobile spot treatments in
greenhouses
Easy to maneuver in
garden centers
Portable fertilizing for gardens,
vegetables, and trees
Li’l Bud-D (5-gallon) HS15-5
The Li’l Bud-D cart is perfect for spot
treatments and accommodates the 7,
11, and 14 GPM Dosatron injectors.
Cart features ergonomic design for
extra maneuverability, no flat tires, and
it is constructed with high strength
polypropylene. Dosatron injector and
cart hook-up kit sold separately. (Cart
Hook-Up Kit Part # HSPK58LB)
www.dosatronusa.com
Mobile Solutions
DosaCart (15-gallon)
The 15-gallon DosaCart is the perfect, portable solution for spot treating
in garden centers and greenhouses. It has a translucent, polyethylene
tank and accommodates the 7, 11, 14, and 20 GPM Dosatron injectors.
Includes: cart with clean-out valve, bracket, and crash bar.
(Dosatron Injector and Cart Hook-Up Kit Sold Separately.)
It’s highly recommended to purchase a Hook-Up Kit for the 15-gallon
DosaCart. The Kit makes cart setup easy and includes: filter, stainless
steel clamps, 5/8” hose, and adapters.
(Dosatron Injector and Cart Sold Separately.)
Product
Description
Part #
DosaCart
15-gallon (Cart Only)
HS15-16
DosaCart Hook-Up Kit
7,11, and 14 GPM (Hook-Up Kit Only)
HSPK58
DosaCart Hook-Up Kit
20 GPM (Hook-Up Kit Only)
HSPKD45
PAA DosaCart
Hook-Up Kit
HSPK58-PAA
Did
you know
...
You can turn the Li’l Bud-D cart and hook-up kit into a
peracetic acid (PAA) sanitation system?
Call 800-523-8499 to find out more!
Li’l Bud-D (5-gallon)
The Li’l Bud-D cart is perfect for spot treatments and accommodates
the 7, 11, and 14 GPM Dosatron injectors. Features include: made of
polyethylene, includes cart and 5-gallon bucket with lid.
(Dosatron Injector and Cart Hook-Up Kit Sold Separately.)
The Li’l Bud-D Hook-Up Kit makes cart set up easy and protects cart
from tipping over. It includes: filter, stainless steel clamps, 5/8” hose,
and adapters. (Dosatron Injector and Cart Sold Separately.)
Product
Description
Part #
Li’l Bud-D
5-gallon (Includes Cart and 5-Gallon
Bucket with Lid)
HS15-5
Li’l Bud-D Hook-Up Kit
HSPK58LB
Call Now! 1-800-523-8499
3
Mobile Solutions
Eco-Cart - 14 GPM (5-gallon)
The Eco-Cart provides quick-and-easy proportional on-demand
dispensing for a great value and is perfect for garden centers, home
gardens, and is ideal for spot treatments. This complete kit was
designed for the 14 GPM-D14MZ2 and includes: cart, 5-gallon bucket
with lid, D14MZ2 injector, and plumbing.
Product
Description
Part #
Eco-Cart
5-gallon (Complete Kit: Cart, 5-Gallon Bucket
with Lid, D14MZ2 Injector, and Plumbing)
HSECO-D14MZ2
Own a Dosatron? No Problem. Our Eco-Cart
is available without the injector. (Includes:
Cart, 5-Gallon Bucket with Lid, and Plumbing)
HSECO
Eco-Cart
(without Injector)
Eco-Cart - 11 GPM (5-gallon)
This Eco-Cart is perfect for the homeowner. It includes all you need
to feed your flowers and plants. Designed with the 11 GPM-D25F1
(fixed 1:100), it includes: cart, 5-gallon bucket with lid, D25F1 injector,
and plumbing.
Product
Description
Part #
Eco-Cart
5-gallon (Complete Kit: 5-Gallon Bucket with
Lid, D25F1 Injector, and Plumbing)
HSECO-D25F1
Eco-Cart
(without Injector)
Own a Dosatron? No Problem. Our Eco-Cart
is available without the injector. (Includes:
Cart, 5-Gallon Bucket with Lid, and Plumbing)
HSECO
Ferticart Portable Injector Cart - 3 Part Solution Cart
The Ferticart is the perfect companion for the Dosatron 14 GPM
injector. It includes three 7-gallon tanks which allow three different
solutions with one cart and injector. The tank has selection valves and
is vinyl dipped to resist corrosion. Includes: 15” pneumatic turf tires
that won’t go flat, low connection points to prevent tipping, backflow
prevention check valve, 200 mesh filter, and all connections.
(Dosatron Injector Not Included.)
Description
Part #
Three 7-Gallon Tanks and Selection Valves. (Complete system,
Dosatron not included.)
X100-101
To
complete your portable solution
...
See pages 24 and 25 for our professional wand and sprayer selection
along with Jack’s Professional Plant Food.
4
www.dosatronusa.com
Proportioners
Dosatron Proportioner
DSA-VENTURI
Venturi proportioners under
constant pressure and flow
conditions, provide an economical
means of accurately dispensing
chemicals. This simple device
offers a wide array of injection
rates and performs at higher
temperatures.
Dosatron Proportioner
Dosatron’s self-cleaning polypropylene proportioner features
flow rates up to 2 GPM at 58 psi in washing mode and up to 13
GPM at 58 psi in rinse mode. Injection rate: 1:100 (1%) to 1:2.3
(43.6%). A simple 1/4 turn of the handle changes the function
from dosing (washing and disinfection) to rinsing and a system of
12 color coded tips are provided for 13 possible injection rates.
For easy maintenance, turn the handle 180º to back flush mode
for easy cleaning of the device.
Description
Part #
Dosatron Self-Cleaning Polypropylene Proportioner.
When
using a
Venturi
system
DSA-VENTURI
...
Constant operating conditions (flow, pressure, product viscosity)
is important to obtain repeatability.
Call Now! 1-800-523-8499
5
Mobile Solutions
Mix-Mate Series
Double Dose Mix-Mate
Water-driven proportioner that will dose two chemicals at the same
time. Allowing independent dilution of chemicals with differing
viscosities and/or dilution ratios. Features:
• Up to 4 GPM (2.2 GPM @ 40 psi)
• Temperatures up to 160 degrees F
• 25 - 125 psi
• 1/2” supply line
• 21 possible ratios for
each product
Description
Part #
Water-Driven Proportioner.
X100-102
HC Mix-Mate
The HC Mix-Mate quickly fills large containers. Chemical viscosity will
affect dilution ratios. Features:
•
•
•
•
Temperatures up to 160 degrees F
Up to 13 GPM (7.66 GPM @ 40 psi)
40 - 80 psi
3/4” supply line
• Up to 1:1 possible ratios with
water thin chemical
• 2 tips supplied for 2:1 or
3:1 ratios
NOTE: Only for use as a filler. Not for use with a gun or wand attached
downstream. Won’t work with back pressure.
Description
Part #
High Concentrate Chemical Proportioner.
X100-103
Boot Wash Mix-Mate
The Boot Wash Mix-Mate is a medium volume foam applicator for
projecting foaming chemicals as a wet, clinging foam. Features:
•
•
•
•
Temperatures up to 160 degrees F
Up to 125 psi (1.34 GPM @ 40 psi)
35 - 125 psi
1/2” supply line
• 20 color-coded precision
metering tips to set
dilution ratios
• Machined polypropylene body
NOTE: Only for use as a filler. Not for use with a gun or wand attached
downstream. Won’t work with back pressure.
6
Description
Part #
Medium Volume Chemical Proportioner.
BW256F
www.dosatronusa.com
Mix-Mate Series
Fill Stations, 1-Way, 2-Way and 3-Way
The Push Lever Fill Stations are chemical proportioners for accurately diluting a chemical
concentrate to the required ratio and filling any sized container with diluted, ready-to-use
chemical solution. Requirements:
Water Flow • Temperature up to 160° F
• High Flow (black injector) 4.0 - 7.3 GPM
• Pressure 25 - 125 psi
• Low Flow (white injector) 1.9 - 3.4 GPM
• Supply line 1/2" minimum
• Bottle Fill (blue injector) 0.6 - 1.0 GPM
Product
Description
Part #
1-Way Push
Lever Fill Station
• Draws chemical concentrate from any sized container
• 20 color-coded metering tips for setting dilution ratios
• Choice of flow rates for filing small to large containers
- Please specify the flow rate for each lever
when ordering
- Bottle fill (BF), Low Flow (LF), High Flow (HF)
X400-126
Product
Description
Part #
2-Way Push
Lever Fill Station
when ordering
X400-127
Product
Description
Part #
3-Way Push
Lever Fill Station
when ordering
X400-128
Sanitizer Station
Designed for foam cleaning, rinsing, and sanitizing medium to large
sized areas where compressed air is not available. Features:
• Temperature - up to 160 degrees F
• Pressure - 35 - 125 psi
• Suppy line - 1/2”
• Flow - 4.0 GPM @ 40 psi
• Foam - 1.34 GPM @ 40 psi
• Spray - 2.3 GPM @ 40 psi
Includes 20 colored metering tips for each injector to set the
dilution ratio
Description
Part #
Foam/Rinse/Sanitize System, Medium Volume, Airless Applicator.
X100-104
Call Now! 1-800-523-8499
7
Installation
Ready Systems
We Offer Custom Installation
Options For Your Convenience
These pre-plumbed, secured systems include
all the necessary accessories. Delivered
installation-ready, they eliminate the need to put
your chemical management system together
piece-by-piece. Just take the system out of the
box, install into your water lines (no electricity
needed) and you are ready to go!
Panel Systems
We offer two panel options: a black poly
panel or an aluminum diamond plate,
your choice. If you don’t see a panel
that meets your specifications, give us
a call at 800-523-8499.
Need
technical
support
...
To assist in the purchase of
accessories? Just scan the
QR code.
Our Panel Systems . . .
Standard 3/4” Single Panel
Part# PS6A130
Standard 3/4” panel includes:
•
•
•
•
•
•
•
•
ball valves
flow restrictor
pressure regulator
check valve
filter
test port
D14MZ2VFII
fittings
Panel is 17” wide x 24” high.
Are factory tested prior to shipment.
8
www.dosatronusa.com
Panel Systems
Standard 3/4” Single Panel - Black Poly Panel
17” x 24” panel includes: ball valves, flow restrictor, pressure
regulator, check valve, filter, test port, Dosatron model D14MZ2VFII,
and fittings.
Description
Part #
17” x 24” Standard 3/4” Single Panel on Black Poly.
PS6A130
Standard 3/4” Single Panel - Diamond Plate Option
17” x 24” panel includes: ball valves, flow restrictor, pressure
regulator, check valve, filter, test port, Dosatron model D14MZ2VFII,
and fittings. (Other injectors are available in same configuration mounted on the
diamond plate panel.)
Description
Part #
17” x 24” Standard 3/4” Single Panel with Diamond Plate Panel.
PSD6A130
Failsafe Dual Panel
36” x 24” panel provides a backup Dosatron that is ready to go if
needed. Includes inbound t-filter, pressure regulator with gauge,
ball valves, unions for quick disconnect to service units,
one-way check valves, flow restrictors, and fittings.
(Failsafe configuration can be installed with a variety of different Dosatron models.)
Description
Part #
36” x 24” Failsafe Dual Panel.
Contact Dosatron for
your specific part #
Failsafe Dual Panel with D8RE2
24” x 48” panel provides a backup Dosatron unit that is ready to go if
needed. Includes: two D8RE2VFII Dosatron injectors, 1 1/2” filter with
200 mesh screen, 1 1/2” pressure regulator, schedule 80 ball valves,
and various fittings.
Description
24” x 48” Failsafe Panel with Two D8RE2VFII Injectors.
Call Now! 1-800-523-8499
Part #
PS5G190-190
9
Panel Systems
Coolant Mixing Panel
The 24” x 36” proportional coolant mixing panel is easily installed and
requires no external power source. The Coolant Mixing Station can:
increase tool life, reduce reject rates, control bacterial growth, reduce
skin and respiratory issues, and reduce foaming to maximize tramp
oil filter efficiency and chip collection. Includes: D14MZ10VVF, t-filter,
ball valves, flow restrictor, pressure regulator with gauge, fittings,10’
injection hose, and water hammer arrestor.
(Accessory Kit is Available - Part # HOSEKITGUN34.)
Description
Part #
24” x 36” Dosatron Proportional Coolant Mixing Panel.
(Complete System, Kit Sold Separately.)
PS4A150
Coolant Mixing System Fill Accessory Kit
All you need for a quick installation is included in the Coolant Mixing
System Fill Accessory Kit. Includes: poly gas nozzle, 15’ mixed
coolant discharge hose, 2 barbs, and 2 hose clamps.
(Cooling Mixing Panel Sold Separately, Part # PS4A150.)
Description
Part #
Coolant Mixing System Fill Accessory Kit.
HOSEKITGUN34
Triple Foam Panel
The 48” x 24” panel is mounted on diamond plate and is perfect for
triple foam or three independent chemicals. Ideal for new installations
or retrofits.
Description
48” x 24” Foam Car Care Diamond Plate Panel.
Part #
Contact Dosatron
for your specific part #
Self Service Panel
The 17” x 24” panel for car care is mounted on diamond plate and is
perfect for presoaks, detergents/soaps, drying agents, bug remover,
and waxes.
Description
17” x 24” Diamond Plate Self Service Panel.
10
www.dosatronusa.com
Part #
Contact Dosatron
for your specific part #
Panel Systems
Floor Scrubbing Fill Station Panel
The pre-plumbed 24” x 17” panel is designed for easy set up and will
perfectly mix your chemicals without waste. Just mount the panel and
connect a water line to the inlet, no electricity needed. It’s easy to
adjust by setting the desired dilution rate and easy to use, just grab
the gas nozzle and fill. For Dosatron chemical injectors 14 GPM
to 40 GPM.
Description
Part #
24” x 17” panel with Dosatron D14MZ2VFII (14 GPM).
PS6A130FS
24” x 17” panel with Dosatron D45RE15VFII (20 GPM).
PS4A081FS
24” x 17” panel with Dosatron D8RE2VFII (40 GPM).
PS4A190FS
Vibratory Panel
The 17” x 24” panel is the perfect solution for vibratory finishing.
Includes: Dosatron D07RE5, adjustable flow meter, 200 mesh filter,
ball valve, check valve, and rigid poly panel.
Description
Part #
17” x 24” Vibratory Compound Dispensing System.
PS6VIB126
Beer Line Cleaning Panel
This 17” x 8” panel provides you optimum cleaning of your beer lines.
Includes: mini panel, D25RE2VFBPII, filter, and check valve. Other
models are available. For more information call 800-523-8499.
Description
Part #
17” x 8” Beer Line Cleaning Sanitation Center.
PS8A018BLC
Indoor Gardening System
The Indoor Gardening System was
designed for every type of grower in
mind to deliver precise results every
time. More information - 800-523-8499.
Modular System Customized for Your Needs!
Description
Part #
Benefits include:
•Nutrient doser
•Reservoir free
•Customize to your
specific needs
•Automated irrigation timer
•Easy to use and maintain
Contact
Dosatron for
your specific
part #
Call Now! 1-800-523-8499
11
Cabinet Systems
Cabinet Systems are custom built to . . .
Keep unauthorized personnel
from disturbing your chemical
management system along with
physically protecting your injector.
These attractive, locking stainless
steel cabinets can be plumbed to
your exact specifications.
The cabinet system is pre-plumbed
and ready for installation.
If you don’t see the cabinet that
meets your specifications, give us
a call at 800-523-8499.
Standard 3/4” Single Cabinet
17” W x 24” H x 7 1/2” D, locking cabinet includes ball valves,
flow restrictor, pressure regulator, check valve, filter, test port,
D14MZ10VFII, and fittings.
Description
Part #
17” x 24” x 7 1/2” Standard 3/4” Stainless Steel Locking Cabinet.
SC1A151
Failsafe Dual Cabinet
24” W x 31” H x 7 1/2” D, cabinet provides a backup Dosatron that
is ready to go if needed. Fitted with ball valves, pressure regulator
with gauge, fittings, one-way check valve, inbound filter kit, and outlet
connector with ball valve.
Description
Part #
24” x 31” x 7 1/2” Failsafe Dual Stainless Steel Locking Cabinet.
Did
you know
...
All cabinet systems are factory tested prior to shipment.
Call 800-523-8499 for a custom installation
12
www.dosatronusa.com
quote!
Cabinet Systems
Coolant Mixing Cabinet
24” W x 31” H x 7 1/2” D, Dosatron’s proportional coolant mixing
cabinet is easily installed and requires no external power source.
The Coolant Mixing Cabinet can: increase tool life, reduce reject
rates, control bacterial growth, reduce skin and respiratory issues,
and reduces foaming to maximize tramp oil filter efficiency and chip
collection. Includes: D14MZ10VVF, T- filter, ball valves, flow restrictor,
pressure regulator with gauge, fittings, 10’ suction hose, and water
hammer arrestor.
(Accessory Kit Available - Part # HOSEKITGUN34.)
Description
Part #
24” x 31” 7 1/2” Dosatron Proportional Coolant Mixing Cabinet.
(Complete System, Accessory Kit Sold Separately.)
SC2A150
All you need for a quick installation is included in the Coolant Mixing
System Fill Accessory Kit. Includes: poly gas nozzle, 15’ mixed
coolant discharge hose, barbs, and hose clamps.
(Cooling Mixing Cabinet Sold Separately, Part # SC2A150.)
Description
Part #
HOSEKITGUN34
Dual Cabinet in Series
24” W x 31” H x 7 1/2” D, Dosatron’s cabinet is fitted with a pressure
regulator, ball valve, unions for quick disconnect to service units,
one-way check valve, inbound filter kit, and outlet connector with
ball valve.
Description
Part #
24” x 31” x 7 1/2” Stainless Steel Locking Cabinet.
(Complete System.)
NEW Cabinet Option . . .
We now offer a white polypropylene cabinet!
Call 800-523-8499 for details.
Call Now! 1-800-523-8499
13
Dosatron
Installation
Accessories
Why Use an Industrial Plumbing Kit?
Dosatron’s Industrial Plumbing Kits are an
all-in-one installation kit that includes what
you need to install and protect your
Dosatron chemical injector. Kits include:
•
•
•
•
•
•
•
•
•
Ball valves - opens and closes
the line
200 mesh filter - stops large particles
from entering the Dosatron
Pressure regulator with gauge regulates incoming pressure
Flow restrictor - prevents
excessive flow
Check valve - helps absorb small
shocks in the line
Unions
Roll of Teflon tape
Instruction card
Fittings
For Quick Priming:
For Sample Collection:
•
•
•
•
•
•
•
•
•
•
14
Shut off outlet ball valve
Insert injection hose into the
chemical container
Turn on the discharge valve
(collect discharged solution
or send it to drain)
Observe the injection hose and
when full, count 10 clicks
Shut off discharge valve
Turn outlet ball valve on
•
•
•
Make sure the unit is primed
Shut off outlet ball valve
Turn discharge valve on
In a clean container, collect 2.5
gallons of diluted solution
Shut off discharge valve
Collect sample out of the 2.5
gallons and check concentration
Turn on the outlet valve
www.dosatronusa.com
Dosatron Installation Accessories
Industrial Plumbing Kits
With Mixing
Chamber
Kits may vary depending
upon Industrial Plumbing
Kit ordered.
Description
Part #
3 GPM Industrial Plumbing Kit
IPK34-3GPM
3 GPM Industrial Plumbing Kit with Mixing Chamber
IPK34MC-3GPM
IPK34-7GPM
IPK34-9GPM
IPK34-10GPM
IPK34MC-10GPM
IPK34-14GPM
IPK34MC-14GPM
IPK100-20GPM
See
page
16 . . .
To purchase supplies individually.
Space Saver Mounting Bracket
Dosatron’s 12” W x 12” H x 12” D with 2” flanges, bracket is the
perfect fit for those tight areas and uses less than 35% wall space
versus a standard triple foam panel. The 3-sided bracket is made of
rugged diamond plate. The finished size, with units attached, is
23” W x 24” H x 17” D. For a custom pre-plumbed system, contact
Dosatron at 800-523-8499.
(Hardware and Dosatrons Sold Separately.)
Description
Part #
12” x 12” x 12” Diamond Plated Mounting Bracket.
(3-Sided Bracket Only.)
Call Now! 1-800-523-8499
PANEL3
15
Installation Accessories Specifically Chosen to
Enhance Your Dosatron Set Up
If you have any questions or can’t find what you are looking for, give our customer
service team a call at 800-523-8499.
Dosa Lock
Dosa Lock is an easy-to-install lock out device that protects
unauthorized access to your injector and fits most Dosatron units.
Features include: secures your settings, tamper resistant, controls
chemical costs, fits injectors ranging from 11 GPM up to 40 GPM,
made of high impact strength polypropylene, and resistant to most
chemicals. Dosa Lock device includes: Dosa Lock, lock, and key.
(Dosatron Injector Not Included.)
Description
Part #
Easy-to-Install Lock Out Device. (Complete set.)
DOSA-LOCK
Dosa Lock Replacement Lock and Key Set
Replacement lock and key set or key only (keyed alike).
Product
Description
Part #
Dosa Lock
Replacement Lock and Key Set.
DOSA-PL
Dosa Lock
Replacement Key Only.
DOSA-PLKEY
Mixing Chamber
3/4” mixing chamber features: enhance chemical blending, excellent
for extreme low flow applications, low volume requirements (bottle
fill), minute injection rates. Polycarbonate and polypropylene.
Description
Part #
3/4” Mixing Chamber
MC34
1” and 1 1/2” Mixing Chamber. Polypropylene. Excellent on low
flow applications.
16
Description
Part #
1” Mixing Chamber
MC100
1 1/2” Mixing Chamber
MC150
www.dosatronusa.com
Flow Restrictor
Description
Part #
3/4” Flow Restrictor - 3 GPM Max. Nickel Plated Brass
FR34-3GPM
FR34-7GPM
FR34-9GPM
FR34-10GPM
1” Flow Restrictor - 20 GPM Max. Nickel Plated Brass
FR1-20GPM
Description
Part #
3/4” Flow Restrictor - 14 GPM Max. PVC
FR34-14GPM
Description
Part #
2” NPT Flow Restrictor - 40 GPM. Schedule 80 PVC
FR200-40GPM
Pressure Regulator -
Pressure reducing valves are devices which,
when installed on water systems, decrease the pressure from incoming water line.
Description
Part #
3/4” NPT pressure regulator, female inlet and outlet, working pressure:
15-87 psi, max incoming pressure: 230 psi, max temp: 140 degrees F, and
preset at 43.5 psi. Chrome plated brass body with 2” face.
PR34
Brass Pressure regulator. 1 1/2” MPT. Also comes with one union adapter
1” FPT. Set pressure 50 psi, adjustable from 25 to 75 psi and designed to
reduce pressures up to 400 psi.
PR100
Brass Pressure regulator. 1 1/2” FPT on one side and one union adapter
1 1/2” FPT on the other side. Set pressure 50 psi, adjustable from 25 to 75
psi and designed to reduce pressures up to 400 psi.
PR112
Call Now! 1-800-523-8499
17
Pressure Gauge
Description
Part #
3/4” Pressure Gauge, bottom mount only, 1/4” MPT, 1 - 100 psi, 2” face,
brass. This gauge is designed for use with gas, oil, and water or any
medium not corrosive to brass or bronze
PG100
Stainless steel Pressure Gauge with extra needle that remains at the
maximum pressure that was reached. 2 1/2” face. 160 psi with
max pointer.
PG160-MP-T
Pressure Gauge Kit -
2” face, includes T fitting reducer. Poly.
Description
Part #
0 - 100 psi, 3/4” FPT
PG100-34KIT
0 - 100 psi, 1” FPT
PG100-100KIT
0 - 100 psi, 1 1/2” FPT
PG100-150KIT
Water Hammer Arrestor
Water hammer is defined as: a pressure surge or wave caused
when a fluid in motion is forced to stop or change directions
suddenly. For installations with strong water hammer potential we
recommend using a water hammer arrestor.
Water Hammer Arrestor -
Use a water hammer arrestor
to prevent the potential damaging effects of water hammer.
Description
18
Part #
3/4” MPT x 6 1/2” tall, stainless steel water hammer arrestor. Normal
operating pressure 35 to 500 psi. Spike pressure not to exceed
2,000 psi.
WHA34-SS
1” MPT x 7” tall, stainless steel water hammer arrestor. Normal
operating pressure 35 to 500 psi. Spike pressure not to exceed
2,000 psi.
WHA100-SS
www.dosatronusa.com
3/4” Totalizer
Analogue Water Meter
Lightweight and versatile
polymer water meter.
Multijet with a maximum flow
rate of 20 GPM.
Water Meter -
portion of a system.
A water meter determines the flow through a specific
Description
Part #
3/4” totalizer water meter, pulse valve is 1/10 gal (1 pulse per 10 gal),
poly, lightweight analogue and reads gallons.
WM34
3/4” totalizer water meter, pulse valve is 1/1 gal (1 pulse per 1 gal),
poly, lightweight analogue and reads gallons.
WM34-1PPG
Check Valve -
A check valve allows flow to go in one direction. Dosatron
recommends installing a check valve on the outlet side of your Dosatron unit
where it may minimize water hammer damage. For installations with strong water
hammer potential we recommend using a water hammer arrestor.
Description
Part #
3/4” schedule 40 PVC, 11 GPM check valve rated up to 200 psi.
Includes extra 3/4” MPTX x 3/4” MGHT.
CV34-11GPM
3/4” Poly Hastelloy check valve rated up to 200 psi.
CV34-PH
1” schedule 40 PVC, 20 GPM check valve rated up to 200 psi.
CV100
1 1/2” schedule 40 PVC, 40 GPM check valve rated up to 200 psi.
CV112
2” schedule 40 PVC, 100 GPM check valve rated up to 200 psi.
CV200
Call Now! 1-800-523-8499
19
Filters -
All our filters include a cleanable, permanent, stainless steel filter.
No replacement cartridges necessary.
Description
Part #
3/4” Filter Kit, 200 mesh/80 micron. Quick clean out valve, poly.
Schedule 80 unions included. (Kit.)
AKF5AP11KIT-A
1” Filter Kit, 200 mesh/80 micron, poly. Schedule 80 unions
included. (Kit.)
AKF5AP20KIT-A
1 1/2”, 200 mesh/80 micron, poly.
AKF5AP40-A
3/4” FNPT T-shaped, space saving, filter, 200 mesh/80 micron.
Fiber charged poly. The flush port can be adapted for clean out of
the 3/4” FPT ball valve.
AKF5AP11T
1” T-shaped, space saving filter, 200 mesh/80 micron, fiber
charged poly, industrial grade.
AKF5AP20T
2” Filter, 200 mesh/80 micron, poly.
AKF5AP100-A
3/4” T Filter, 200 mesh/80 micron, industrial grade poly. Small,
compact filter - good for tight installations.
AKF5AP11T-V
If
you are interested
...
In becoming a Dosatron Authorized Service Center,
Call 800-523-8499 to learn more!
20
www.dosatronusa.com
ChemStick Pick-Up Assembly -
The ChemStick was designed
to be used with either a barrel or tote and easily connects
to existing pick-up tubes.
Features include:
• Chemical and acid resistant polypropylene
construction with Viton seals
• Adjustable stopper for setting depth
• Rigid pipe to overcome common problems with flexible tubing
• Vented
• Keeps debris out of chemical container with bung adapter
(barrel) or cover plate (tote)
Includes:
• Four (4) polypropylene hose barbs: 1/4”, 3/8”, 1/2”, 3/4”
• Foot spacer (1/2”) to keep strainer off container floor
• Chemical check valve to prevent backflow
• Adjustable stopper for setting depth
• Hastelloy strainer easily accessible for cleaning
Which Do I Need . . .
A ChemStick with the Bung Adapter or a Cover Plate?
The Bung Adapter is used with Barrels when the
container includes a threaded opening. The Cover Plate
is used when the opening is not threaded.
Description
Part #
33” long with bung adapter for barrel.
CS33
CS48
CS54
48” long with tote plate cover.
CSP48
54” long with tote plate cover.
CSP54
ChemStick for 5-gallon bucket. Provides easy set up and is vented.
Size: 1/4” (6mm). Universal fitting can be used with any 5-gallon bucket
with spout. (5-Gallon Bucket and Lid Not Included.)
CS12-6
ChemStick for 5-gallon bucket. Provides easy set up. Size: 5/16” (8mm).
CS12-8
Call Now! 1-800-523-8499
21
Description
Part #
Place the Injector Tote Stand on top of your barrel, drum, tote, or mini-bulk
tank and thread a garden hose into either side for a quick and easy
installation.
•
Mounted to a 16” x 16” poly board for securing fittings and
adding stability
•
Comes with a 3/4” in-line filter assembly
•
Inlet and outlet are 3/4” and can be fitted with GHT or NPT
X500-103
12-Gallon Dome Tank with lid and graduated scale. HD poly.
PTank12
40-Gallon Tank with 8” lid. Poly.
PT40
5-Gallon translucent bucket with expandable spout lid and graduated
measurement sticker. Poly.
PB5GAL
Bucket Stacker stacks two 5-gallon buckets in the footprint of one! Made of
white PVC coated steel and built for stability, the lid holds up to a 3/4”
suction hose. Holds up to 70 pounds of liquid. (Tubing and buckets
not included.)
BS5
Tools and Supplies Perfect for Maintenance.
Dosa-Lube - Is perfect to condition static seals and o-rings. Comes in a
conveniently sized packet of 2.5 grams.
22
Description
Part #
Dosa-Lube – silicone.
DOSA-LUBE
www.dosatronusa.com
Dosa-Klean and Medicator Rx- Dosa-Klean and Medicator
Rx are the same great product. Both increase your Dosatron’s performance by
cleaning and removing rust, mineral deposits, and calcifications. If you call your
Dosatron a medicator, order Medicator Rx. Everyone else order Dosa-Klean.
Description
Part #
Dosa-Klean: .187 lb (85 gram) convenient single-use packet.
CLEANSER-ALL
Same great Dosa-Klean, now available in a convenient 3 lb
pail that includes scoop and pail with handle. 2 scoops of
Dosa-Klean per gallon of water per injector.
Medicator Rx:.187 lb (85 gram) convenient single-use packet.
Same great Medicator Rx, now available in a convenient 3 lb
pail that includes scoop and pail with handle. 2 scoops of
Medicator Rx per gallon of water per injector.
CLEANSER-3LB-ALL
CLEANSER-LS
CLEANSER-3LB-LS
Repair Supplies
Product
Description
Part #
Universal Strap Wrench
Ideal for use on Dosatron bell housings,
7 GPM through 40 GPM. Also can be used
to remove the sleeve of the Dosatron
100 GPM injector.
TOOL01
Seal Remover Pick
Safely and quickly remove seals from their
seat without damaging surrounding areas
TOOL02
Tool Kit
Handy tool kit assembled with commonly used
tools in an easy-to-carry zipper pouch. Tool
kit includes: needle nose pliers, seal remover
pick, two Phillips screwdrivers (sizes P1 and
P2), 8mm box wrench, packet of cleanser, and
Dosa-Lube. (Color of Pouch May Vary.)
TOOL-KIT
Pressure Tester
Brass pressure tester with max pointer, 160
psi and 2 1/2” face. Includes FPT adapter.
Used as a pressure testing kit to check your
max pressure when dealing with pressure
fluctuations. Helps to identify pressure
spikes and pressure related issues.
PG160-MP
Testing Station
Repair and testing station panel (black poly)
for 3/4” Dosatron injectors. Use to test:
DM11F, D25 series, D128R, and D14 series.
Ideal for locations that provide service and
maintenance. Allows for quick and easy
hook-up and includes, hoses, click chart,
flow rate chart, pressure gauge and 2
brackets. (Dosatron injector not included.)
TBLD34
Call Now! 1-800-523-8499
23
Mobile
Solutions
Service
and Maintenance Accessories
Seal Kits
It’s important to keep your Dosatron in tip-top shape. One of the best ways is by
performing yearly Seal Kit maintenance on your Dosatron.
Dosatron Injector
Part #
D07RE5 - 3 GPM
PJDI095
D07RE125 - 3 GPM
D07RE125 (For serial # <05370953)
PJDI106 (For serial # >05370953)
D25RE10 - 8.8 GPM
PJ120
D14MZ520 - 9 GPM
PJDI135
D25F - 11 GPM
PJ117
D25F1 - 11 GPM
PJ117
D25RE2 - 11 GPM
PJ093
D25RE5 - 11 GPM
PJ119
D25RE09 - 11 GPM
PJ127
D25RE1500 - 11 GPM
PJ118
D25RE1500-D - 11 GPM
PJ118
D14MZ2 - 14 GPM
PJDI116
D14MZ2-D - 14 GPM
PJDI116
D14MZ5 - 14 GPM
PJDI120
PJDI120V
D14MZ5-D - 14 GPM
PJDI120
D14MZ10 - 14 GPM
PJDI122
PJDI122V
D14MZ10-D - 14 GPM
PJDI122
D14MZ3000 - 14 GPM
PJDI139
D14MZ3000-D - 14 GPM
PJDI139
D45RE3 - 20 GPM
PJ084
PJ095 (Side-inject)
D45RE8 - 20 GPM
PJ098 (For serial # <07141221)
PJ151 (For serial # >07141221)
D45RE15 - 20 GPM
PJ096
PJ097 (Side-inject)
D45RE3000 - 20 GPM
PJ116
D8RE2 - 40 GPM
PJDI120
D8RE5 - 40 GPM
PJDI122
D20S - 100 GPM
20PJ030
24
www.dosatronusa.com
Service and Maintenance
Accessories
Mobile
Solutions
Mini Maintenance Kits
For quick, basic maintenance, pick up a Mini Maintenance Kit for your Dosatron.
Dosatron Injector
Industry
Part #
D25F1 - 11 GPM
Horticulture
PJ117MINI-H
DM11F - 11 GPM
Livestock
PJDI900MINI-LS
DI16 - 11 GPM
Horticulture
PJDI075MINI-H
D14MZ2 - 14 GPM
Horticulture
PJDI116MINI-H
D45RE15 - 20 GPM
Horticulture
PJ096MINI-H
D45RE15 - 20 GPM
Livestock
PJ096MINI-LS
D8R - 40 GPM
Horticulture
8PJ052MINI-H
D8RE2 - 40 GPM
Horticulture
PJDI120VMINI-H
D20S - 100 GPM
Horticulture
20PJ030MINI-H
Watch Dosatron’s Service and
Troubleshooting Videos . . .
Follow step-by-step instructions for seal kit maintenance
along with videos that address the three most common items
to troubleshoot.
Scan for Free Preventive Maintenance
i
Scan for Service/Maintenance Videos
i
Scan for Service/Technical Support
Call Now! 1-800-523-8499
i
25
Mobile Solutions
Meters and
Sensors
Tools to Determine Specific Measurements
Refractometer
•
•
•
•
•
•
•
Digital, handheld, pocket refractometer
Low to mid-range Brix (0.0 to 53.0%), and high temperature
measurement (9.0 to 99.9 degrees C) of a wide range of fruit juice,
food, or beverages such as soup, tomato sauce, or marmalade
Light, ergonomic, compact body (10.9 x 5.5 x 3.1 cm)
One-handed operation, easily fits in your shirt pocket
Automatic Temperature Compensation (ATC) for accurate
readings in fluctuating temperatures that display in three seconds
External Light Interference (ELI) feature display warning message
when direct light is detected
Body has Ingress Protection (IP) - 65 rating for protection against
dust and water
X500-102
Guardian Monitor Connect
A constant nutrient solution indicator of desired levels of pH,
conductivity, and temperature along with data logs to your computer
(requires Connect Stick).
•
Plant-safe green LEDs
•
Large, easy-to-read displays
•
Simple push button pH calibration
•
No calibration required for conductivity and temperature
•
Flashing high and low alarms
X500-105
Connect Stick
Receives wireless data from Guardian Monitor Connect logging data to
cloud. Simply place into a USB port.
•
Free software
•
View data and current status remotely via Google Docs
X500-106
pH and EC Pen
26
EC Pen - Hand held conductivity meter.
•
Measures conductivity and temperature •
•
Backlit LCD display
•
Fully waterproof
Low battery indicator
X500-107
pH Pen - Hand held meter.
•
Measures pH and temperature
•
Successful pH calibration indicator
Auto off function
Hold reading function
X500-108
•
•
www.dosatronusa.com
Mobile Solutions
Etatron
Electric Chemical Dosing Pumps
The eOne Series Electronic Metering
Pumps provide constant dosing, energy savings, and low
operating temperatures resulting in reduced mechanical stress. They feature:
• Alarm to detect suction or discharge interruption
• Standard PVDF solenoid head
• Manual air bleed pump head for
fast priming
• Equipped with ceramic ball valve
• 6.5 ft. suction height
• PVDF injection valves equipped with
thread options:
1/2”, 3/8” and m10
• Reduced operating temperature to
increase reliability
• Low mechanical stress for better performance
• Compact design and uses approximately 60%
less energy
• IP65 acid resistant housing
• Long lasting unique one piece PTFE
diaphragm design
• 120 or 230 V - 50/60 Hz
• Works off water meters
eOne Series
eOne Basic Dosing Pump
• Manual flow rate adjustment
0 - 100% and 0 - 20%
Part #
• Dosing frequency 180 impulses
per minute
eOne MA Dosing Pump
• Manual flow rate adjustment
0 - 100% and 0 - 20%
• High dosing frequency of 300
impulses per minute
Part #
• Underload suction alarm
• Overload discharge alarm
• Low level input
eOne MF Multifunction Microprocessor Dosing Pump
impulses per minute
• Backlit graphic display
• Flow sensor alarm
• Low level input
• Password protection
• Flexible user-friendly interface
• Programmable dosing from
water meter signal
• When used with a water meter
the pump automatically adjusts
the frequency of the dose based
on the flow rate
eOne Plus Microprocessor Dosing Pump
• Suitable for proportional and
control applications pH, Rx, Cl,
ppm monitoring
impulses per minute
• Backlit graphic display
• Flow sensor alarm
• Low level input
Contact
Dilution
Solutions,
800-523-8499,
for your
specific part #
•
•
•
•
•
Relay output
Password protection
Flexible user-friendly interface
Ability to work off probes
Programmable dosing from
water meter signal
• When used with a water meter
the pump automatically adjusts
the frequency of the dose based
on the flow rate
Call Now! 1-800-523-8499
Contact
Dilution
Solutions,
800-523-8499,
for your
specific part #
Part #
Contact
Dilution
Solutions,
800-523-8499,
for your
specific part #
Part #
Contact
Dilution
Solutions,
800-523-8499,
for your
specific part #
27
Applicators
Premium Watering Wands -
High quality, wands made of
professional grade material for hand watering. Ergonomic insulated grips with
durability for long life. Ideal for home gardeners who want to water like the
professionals.
28
Description
Part #
16” One Touch Pro Rain wand, blue. Professional grade materials with one
touch thumb button to control your water flow. Made from rubber over
molded, die-cast zinc with machined brass male threads, the One Touch is
made to last.
X300-100
30” One Touch Pro Rain wand, blue. Professional grade materials with one
touch thumb button to control your water flow. Made from rubber over
molded, die-cast zinc with machined brass male threads, made to last.
GSTNF
36” Hanging Basket Wand, blue. Professional grade materials with one touch
thumb control to control your water flow. Ergonomic insulated grip.
X300-101
9 Pattern Spray Gun, blue. Quick click pattern, heavy duty
construction. 9 spray patterns perfect for any outdoor activity such as
washing cars, bathing the dog, or watering your plants. Ergonomic
insulated grip.
X300-102
The one Touch Shower & Stream™ gives you complete and total water flow
control with just one touch of your thumb. Pick shower or stream pattern.
Ergonomic design, heavy duty metal, comes in blue.
X300-103
Heavy duty metal Fan Nozzle has an ergonomic, insulated grip. Comes in
blue with an easy-to-use shut off valve.
X300-104
www.dosatronusa.com
Applicators
Jack’s Classic All Purpose 20-20-20 Plant Food
Description
Part #
Professional line of plant food used by leading plant growers. Jack’s
Classic All Purpose 20-20-20 Plant food comes in a convenient 4 lb
container. It consists of a balance of nitrogen, phosphorus and
potassium for use on all indoor and outdoor plants. Feeds through
both the roots and the leaves.
FERT20-4LB
Garden Hose
Description
Part #
5/8” x 12’ professional rubber water hose with garden hose
fittings, blue.
HOSE58-12FT
Gas Style Nozzle
Description
Part #
Gas style gun nozzle with 3/4” adapter provides quick delivery of
finished product. Poly.
GGS1
Spray Wand
Description
Part #
Spray wand made of 304 stainless steel with Viton o-rings.
30” extended wand provides ergonomic design, no bending over
to fill buckets.
GS38
The Premium Wands . . .
Are used in commercial settings. Not your typical
retail sprayer. Rugged and dependable.
Call Now! 1-800-523-8499
29
Foam Up Series
Our Foam Up Series creates foam without the need for compressed air! Use downstream
from your Dosatron to create a wet or clinging foam that increases chemical contact time
and effectiveness.
Airless Foam Wands
Description
Part #
Airless #10 foam nozzle, low-flow adjustable fan pattern, 1/2” FPT,
1 GPM at 40 psi, pump fed. Ideal for smaller close-up applications. Poly.
X400-108
Airless foam wand, PP, 1.5 GPM at 40 psi, pump fed. 6’ throw at 40 psi. Ideal
for larger applications. Poly.
X400-109
Airless foam wand, PP, 6.3 GPM at 40 psi, pump fed. Poly.
X400-110
Airless #10 foam nozzle equipped with ball valve, poly, 1/2” FPT,
1 GPM at 40 psi with stainless steel ball valve, pump fed.
X400-111
Airless foam wand, poly, PP, equipped with ball valve, 1.5 GPM, 6' throw, at
40 psi with stainless steel ball valve, pump fed.
X400-112
Airless foam wand, poly, PP, equipped with ball valve, 6.3 GPM at 40 psi
with stainless steel ball valve, pump fed. 20' throw at 60 psi.
X400-113
Compact Airless Foamers/Sprayers -
Designed to optimize the
use of chemical and water, these compact airless foamers produce just the right amount of foam
and include 20 colored tips that allow you to spray with 21 possible dilution rates. Creates clinging
or wet foam. Quick disconnect, precision metering tips, durable, with machined polypropylene body
and wand.
30
Description
Part #
Sprayer with a 22 oz. bottle, polypropylene body and wand. 1/2" supply
line. Water pressure 20-100 psi. Water flow @ 40 psi - 2.3 GPM. Low flow.
X400-122
Airless foamer has a 22 oz. bottle with polypropylene body and wand.
Water pressure 20-100 psi. Water flow @ 40 psi - 0.54 GPM. Higher flow.
X400-106
Airless foamer with a 22 oz. bottle with polypropylene body and wand.
Water pressure 20-100 psi. Water flow @ 40 psi - 1.30 GPM. Low flow.
X400-107
www.dosatronusa.com
Foam Up Series
Description
Part #
Sprayer has an 89 oz. bottle with polypropylene body and wand.
1/2" supply line. Water pressure 20-100 psi. Water flow @ 40 psi 2.3 GPM. Low flow.
X400-122-89
Airless foamer with an 89 oz. bottle with polypropylene body and wand.
Water pressure 20-100 psi. Water flow @ 40 psi - 0.54 GPM. Higher flow.
X400-106-89
Airless foamer includes an 89 oz. bottle with polypropylene body and
wand. Water pressure 20-100 psi. Water flow @ 40 psi - 1.30 GPM.
X400-107-89
3-Gallon Pump Up Wet Foam Unit
Description
Part #
3-gallon wet Pump Up Foamer features easy-grip trigger gun with locking
latch and extended wand. No compressed air required. Advanced pump
design requires less than half the pumping effort typically required to
pressurize similar units. The adjustable foam nozzle projects a wide
fan pattern for fast coverage or a narrow stream for increased range.
Compressed air valve allows for quick recharge (instead of pumping) if
desired. Just fill the tank with ready-to-use chemical solution, pump it up
and foam.
Includes:
• high density polyethylene tank
• Viton seals and o-rings
• pressure relief valve
X400-104
• compressed air “quick charge” valve
• 4’ discharge hose
• adjustable foam nozzle
3-Gallon Pump Up Dry Foam Unit
Description
Part #
3-gallon dry Pump Up Foamer. Easy-grip trigger gun with locking latch
and stainless steel fan nozzle for fast application. No compressed air
required. Advanced pump design requires less than half the pumping
effort typically required to pressurize similar units. Creates rich,
clinging dry foam that adheres to surfaces longer to maximize chemical
effectiveness. Compressed air valve allows for quick recharge (instead of
pumping) if desired. Just fill the tank with ready-to-use chemical solution,
pump it up and foam.
X400-103
Includes:
• 3-gallon HDPE tank with
UV inhibitor
• Viton seals and o-rings
• pressure relief valve
• compressed air “quick charge”
valve
• machined foamer body
• heavy-duty 6’ discharge hose and
trigger gun
• polypropylene 10” wand and stainless
steel fan nozzle
• webbed nylon carrying strap
Call Now! 1-800-523-8499
31
Fittings
To make assembling your installations a little easier, we have provided
a list of our most popular fittings. If you don’t see a fitting that you need,
give us a call at 800-523-8499.
Tee’s
Description
Part #
3/4” FPT, Poly Tee.
TT34
1” FPT, Poly Tee.
TT100
1 1/2” FPT, Poly Tee.
TT112
Ball Valves
Description
Part #
3/4” schedule 80, FPT ball valve, PVC.
BV34-SCH80
1” schedule 80, FPT ball valve, PVC.
BV100-SCH80
1 1/2” schedule 80, FPT ball valve, PVC.
BV150-SCH80
Description
Part #
Elbow, 3/4” male GHT and 5/8” barb, poly.
EL34MH58B
Elbow, 3/4” FPT to 5/8” barb, poly.
EL3458F
Elbow, 3/4” MPT to 5/8” barb, poly.
EL58B34MP
Poly Street Elbow, 3/4” FPT x 3/4” MPT, poly.
HS34SE-FPXMP
Poly Street Elbow, 1” FPT x 3/4” MPT, poly.
HS1SE-FPXMP
Elbows
32
www.dosatronusa.com
Fittings
Unions
Description
Part #
3/4” FPT schedule 80 union, PVC.
BK034-U
1” FPT schedule 80 union, PVC.
BK100-U
1 1/2” FPT schedule 80 union, PVC.
BK150-U
Description
Part #
3/8" barb to 3/4" MPT, poly.
BARB037-075MP
BARB050-050MP
BARB058-075MP
1/2" barb to 3/4" NPT, poly.
BARB050-075M
BARB075-050MP
BARB075-075MP
3/4" barb to 1" MPT, poly.
BARB075-100MP
Barbs
Call Now! 1-800-523-8499
33
Fittings
Reducers
Description
Part #
Reducing nipple, 3/4" MPT to 1/2" MPT, poly.
RN75-50
Reducing nipple, 1" MPT to 3/4" MPT, poly.
RN100-75
Reducer bushing, 1 1/2" MPT to 1" FPT, schedule 80, poly.
RB150100SCH80
Reducer bushing, 3/4" to 1/2" NPT, poly.
RB75-50
Reducer bushing, 1" MPT to 3/4" FPT, poly.
RB100-75
Reducer bushing, 1" MPT to 1/4" FPT, poly.
RB100-25
Reducer bushing, 3/4" MPT to 1/4" FPT, poly.
RB75-25T
Description
Part #
3/4" MGT to 3/4” FPT adapter, poly.
G34
3/4" FPT x 3/4" FGHT swivel adapter, poly.
SA-34
Adapters
34
www.dosatronusa.com
Suction Hose Tubing
Replacement tubing for Dosatron injectors.
Dosatron Injector
Hose assembly part number
(includes: tubing, strainer, and weight)
Part #
DI520
MPDI013 (includes foot valve; part # 8MP006 no foot valve)
20MMR
DI16
MPDI005
6MM
DI150
12MM
DI150V
20MMR
DI210
12MM
DI210V
20MMR
DI1500
MPDI005
6MM
DI110
12MM
DI110V
20MMR
D128R
MP004
6MM
D25RE2
MP004
6MM
D25RE2V
8MP006
12MM
D25F
MP004
6MM
D25RE1500
MPDI005
6MM
D25RE5
8MP006
12MM
D25RE10
8MP006
12MM
D25RE09
MPDI005
6 MM
DM11F
MPDI185
8MM
D14MZ2
MPDI185
8MM
D14MZ5
8MP006
12MM
D14MZ5V
MPDI189
16MM
D14MZ10
MPDI189
16MM
D14MZ10V
20MMR
D14MZ520
MPDI189
16MM
D14MZ520V
20MM
D14MZ3000
MPDI205
4MM
D45RE3000
MPDI005
6MM
D45RE15
8MP006
12MM
D45RE3
8MP006
12MM
D45RE8
20MMR
D8R
8MP006
12MM
D8RE2
MPDI189
16MM
D8R150
20MMR
D8RE5
20MMR
D20S
20PP001
20MMR
D20S-2000
MPDI189
16MMR
D07RE125
MP004
6MM
D07RE5
MP004
6MM
Call Now! 1-800-523-8499
35
We want you to
be our customer
for life . . .
It
is our mission to
provide you with the very
best service and support
possible, because we put
ourselves in your shoes.
We understand what you want
and deserve. We believe having
someone ready to answer all of your
questions is extremely important.
Communicating is easy, call
800-523-8499 between 8:30 a.m.
and 5:00 p.m. EST, Monday
through Friday or email us at
mailbox@dosatronusa.com.
If you don’t see what you are looking
for in this catalogue, give us a call at
800-523-8499.
Visit us on the web at www.dilutionsolutions.com or
call 800-523-8499 for additional information,
contacts, and distributor information.
36
www.dosatronusa.com
Product Spotlight
Ultra Lean
Dilution System
Dosatron’s NEW low dosing system, the Ultra Lean Dilution System, is great for low
ppm applications and is designed for a wide variety of chemicals. The system
is water-powered so no electricity is necessary and the tank automatically
replenishes itself when low levels are reached.
With this dual injection system, the dilution rate is 1:100 to 1:9000000, depending upon
the combination of units.
No pre-dilution is required!
The Ultra Lean does it for you!
Includes:
•
•
•
•
•
Preassembled
polyethylene board
Two Dosatron injector pumps
Priming valve and
sample port
Premix polyethylene tank
equipped with mechanical
float valve
Plumbing: filter, pressure
regulator, flow restrictors,
unions, ball valve, and all
necessary fittings
Call 800-523-8499 for your
specific application and to order.
Call Now! 1-800-523-8499
2014-04
A1200

panel systems - Dilution Solutions

Transcription

Similar documents

Medicator Specifications

Model Octave - Master Meter

ScaleNet® Commercial Water Treatment Systems

1" Impact Wrench - Racine Railroad

Deck Blaster and Grate Cleaner

Reverse Osmosis - H2O Innovation

seisco quick guide - radiant floor heat

Structure Of August Srew Air Compressor

deuter Streamer 2.0 Liter

University of California at Irvine