Small Winery Equipment Sale

Small Winery Equipment Sale
ex-Silver Wings Wines 2014 situated near Riddell’s Creek Victoria.
All items must clear.
Delivery to Melbourne free for smaller items, otherwise site pick up.
Bulk offers considered, forklift on site.
Contact:
Keith
M: 0407 291449 .
keith@silverwingswines.com.
www.silverwingswines.com
1/
Lowara Flo-Max centrifugal wine pump.
Single phase, all S.S. exterior and interior impellor with 2” BSM fittings,
2800 RPM with flow rate: 300lts/ min @ 10m head. 100lts/ min @ 17m
head. Fitted with easy carry handle, near new condition as rarely used.
Price: $300
2/
Mono CP25 Speedmaster model, single phase positive displacement wine
pump, variable speed up to 1500lts/ hr with 1” BSM inlet & outlet fittings,
fitted with easy carry handle. Very good used condition. Has spare new
pump body.
Price $750
3/
Allpumps centrifugal wine pump with all S.S. impellor and casing with 2”
BSM inlet and 1” BSM outlet, fitted with easy carry handle. Quick clean
unit in excellent condition as rarely used. 0.5HP, 1450 RPM with flow rate
approx. 5,000lts/ hr depending on head.
Price $400
4/
Grundfos all SS submersible KP150 centrifugal pump v.good condition.
8cum/hr @ 5m head used mainly for tank integration and tirage.
Price $75
9/
SS canister type
filter housing
24” (600mm)H x
8” (200mm)Diam
holds 1, 2 or 3 x
200mm filter cartridges.
Pressure gauge plus 1”
male BSM inlet & outlets plus internal fittings
and a range of 200mm
filter cartridges.2” male
5/
20’ container, insulated ex-refer. Extra internal width 2.4m x 2.4H all internal
walls S.S. plus rear doorway access. Good used condition.
Price: $2,500
6/
20’ container, insulated ex-refer with 2.3m wide x 2-1H internal walls S.S.
Excellent condition.
Price: $3,000
7/
20’ container, insulated ex-refer with extra height 2.5 plus extra width 2.3m
internal. Good used condition.
Price: $3,000
8/
1” (25mm) Wine Hoses with female SS BSM fittings each end:1 x 13m (new)
1 x 9m
1 x 8m
1 x 7m
1 x 3m & 2 x 2m – used between filters
1 x 4m with 1 x female 1” end and 1 x PVC threaded hose end
1 x 7m with 1 x female 1” end and 1 x 1.5” male end
Prices include couplings:
$20 to $70 length
depending upon condition
9/
SS canister type filter housing 24” (600mm)H x 8” (200mm)Diam
holds 1, 2 or 3 x 200mm filter cartridges. Pressure gauge plus 1” male BSM
inlet & outlets plus internal fittings and a range of 200mm filter cartridges.
Price $1200.
10/
Old 30cm round EKWIP plate filter in tinned bronze with SS geared pump and
all SS couplings, sight glass etc. Holds approx. 26 filters between plates, plus
assorted filter packs. Price: $250
11/
SS beer kegs with seals 3 x 50lt - $25e & 2 x 80lt - $40e
12/
2 x 200lt cherry barrels w lids $50e
2 x 100lt blue bins w lids $25e
13/
Total Concept barrel washer with matched Kranzle pressure cleaner unit has
hand gun and manuals. Rarely used, v.g. cond.
Price $3500
14/
12 x 32lt Nally stackable picking bins
15/
2 x PVC winery shovels $25e, 1 x SS
pitch fork $15, 1 x PVC hoe $10, 3 x long hanbrooms plus scourer
$25
$5e
dled
16/
2 x single head plastic bottle washers (one damaged) with bottle stand $30
17/
1 roll double sided insulation bubble wrap $50
18/
2 tonne trolly jack, heavy duty full gauge. V Good cond with no leaks. $225
19/
1” BSM S.S. fittings
2 x 2” to 1” reducing cones $30e
1 x 1” 316 S.S. in line venturi w male BSM
3 x 1” male unions with hand grips. $20e
1 x 205mm racking plate to male end. $40
1 x 80mm racking plate to male end. $30
1 x male T junction. $30
1 x female hose tail. $10
1 x male to female in-line sight glass. $50
1 x male to female eyeball valve. $50
20/
1.5” BSM S.S. fittings.
1 x sparging unit, 1 x injector unit plus in-line female coupling. $80
3 x 1.5” to 1” reducing cones. $40e
21/
2” BSM Fittings:
2” male to 1.5” female reducing cone
$40
2” male to 1”
“
“
“
$40
1 x male to female extension 350mm long $45
1 x female to female extension 270mm long $40
1 x 90 bend male to female $30
2 x Hose tails with hex nuts (new) $20e
3 x male to male connectors $30e
1 x Racking plate $60
22/
Near new Bennet Nitrogen regulator (suits
sparging unit)
Price: $30
23/
S.S. Hose clamps (made in Germany)
Price: $30
4 x 2”
8 x 1.5”
8 x 1”
24/
S.S. barrel stirrer
25/
S.S. draining sieve 200mm diam x 370mm long
Price: $30
26/
4 x BSM hex
spanners x 1”, 1.5”, 2”
& 3” Price: $50 lot
27/
1 x 3” to 2” male cone plus O rings $40
28/
Lots of 1”, 1.5” and 2” O rings best offer
29/
3 x 300w heater probes w 2m leads & adjustable
temp 10 – 20 degrees.
Price: $25 lot
Price: $25
2” S.S. SHUT OFF VALVES:
30/
2 x old Saunders S.S. valves w spare seal
Price: $40 lot
31/
1 x 1” Alfa Lavall valves w spare seal
1 x 2” Alfa Lavall valve
Price: $30
Price: $30
32/
2 x female to male butterfly valves (+spare seal) Price: $90 lot
33/
1 x female to female
“
“
Price: $40
WINE TANKS:
34/
1 x 5200lt vertical tank on legs with water seal top, internal ladder and detachable internal S.S. coil for cooling/ heating. Conical top and bottom with
2” BSM valve and extension. G.C.
$2,250.00
35/
4 x neoprene Schutz tanks 1,000lts in light weight frames, clean ready to use.
$75e
36/
2 x Nally Bulki Bins in heavy duty
frames, 1,000lt with conical tops & lids.
$150e
37/
1 x work cage/ platform for foeklift, all steel with roller wheels, self closing door
and locking chain. Good condition, no worksafe certificate.
Price: $100
38/
Fruit Box Tipper:
Hydraulic tipping rams offer full manual control and has adjustable pneumatic box
lifter/ locking mechanism. Fits all sized wooden and plastic picking bins and tips up
to 500kg easily. All galvanised finish with S.S. delivery shute on top.
Stand 2.1m to pivot point with an additional stand for legs of 800mm. A great unit
for vintage and also tips post ferment un-drained skins with little to no wine loss.
Price: $4,000
39/ Small twin head gravity feed bottling unit. S.S. and a sliding plastic flow control
sleeve.
Good for show or bulk wine samples.
Price: $25
40/ Manual 6 head gravity feed bottling unit.
Old AVE unit works well and has some spares. Excellent for small runs but
can do up to 300doz a day depending upon operator. AVE can still supply parts
direct from Italy. More info available upon request.
Price: $500
41/ Old AVE semi-auto single head corking unit.
Modified to single phase 240V power and new bronze jaws fitted 8 years ago it’s a
good working unit capable of 300 doz/ day depending upon operator. Has a manually
operated foot pedal to commence non vacuum cycle and is adjustable to fit 375ml to
Magnum sized bottles. On wheels for easy manoeuvring.
Price: $1,500
Picture to be supplied
42/ Clark 2 tonne forklift model C500Y50.
Large tyres and 3.8m container mast w side shift & tilt makes this a very handy general unit. No compliance cert., Gas operated with self fill tank and good motor, hydraulics leak
a bit of oil but unit has never let me down.
Price: $3,000
Bottling line last operated in 2011.
43/
19 x Neoprene Barrel Bungs. Mostly purple colour with some white all in very
good condition.
Price: $3.00 each or $40 the lot.
44/
45/
316 S.S. hand cap plunger
Plate diam 205mm and handle
1.1m long.
$50
46/
800mm long 316 S.S. barrel
racking stem with eye ball shut
off valve. 2 x 1in Male BSN.
$90
316 S.S 3 branch bucket stand,
holds 9 buckets.
Price: $70
47/
2 x sets of A framed French Oak Riddling racks for
Champagne production.
Holds five dozen per side.
Price: $250e
48/
Full face shield, has variable head size band
And swivel face protector. G.C.
Price: $10