Lighting - Waldo Point Harbor

Transcription

LIGHTING
SPECIFICATION
SHEET
FILE
FOR
WALDO
POINT
HARBOR
Specification Sheet File is cooperative with Lighting Plans,
Sheets LL-1 through LL-5
F E B R U A R Y 1 9, 2 0 1 0
LIGHTECH
366
SAN
ARIAS
R A F A E L,
STREET
CA
94903-3306
415-479-2345
FAX:
415-479-2354
lightechdesign@yahoo.com
Catalog Number
Notes
FEATURES & SPECIFICATIONS
Type
INTENDED USE — Ideal for parking areas, street lighting, walkways
and car lots.
A
CONSTRUCTION — Rugged, die-cast, soft corner aluminum hous-
Soft Square Cutoff Lighting
ing with 0.12" nominal wall thickness. Extruded 4" soft corner arm
for pole or wall mounting is standard. Die-cast door frame has
impact-resistant, tempered, glass lens that is fully gasketed with
one-piece tubular silicone.
KAD
FINISH — Standard finish is dark bronze (DDB) polyester powder
METAL HALIDE
finish, with other architectural colors available.
100W, 150W, 175W, 200W,
250W, 320W, 350W, 400W
20' to 35' Mounting
OPTICAL SYSTEM — Anodized, aluminum hydroformed reflectors:
IES full cutoff distributions R2 (asymmetric), R3 (asymmetric), R4
(forward throw) and R5S (square). High performance anodized,
segmented aluminum reflectors IES full cutoff distributions SR2
(asymmetric), SR3 (asymmetric) and SR4SC (forward throw, sharp
cutoff). Segmented reflectors attach with tool-less fasteners
and are rotatable and interchangable.
ELECTRICAL SYSTEM — High reactance, high power factor ballast for 100W/150W. Constant-wattage autotransformer for 175400W. Super CWA Pulse Start ballast required for 200W, 320W
and 350W (must order SCWA option).Ballast is copper-wound
and 100% factory-tested.
Porcelain, horizontal, position-oriented, socket with copper alloy, nickel-plated screw shell and center contact. Medium-base
socket used with 100W & 150W, mogul-base socket used with
175-400W. UL listed 1500W-600V.
Standard Dimensions
EPA: 1.2 ft.2
Weight: 41 lbs (18.6 kg)
Length: 17-1/2" (44.5 cm)
Width: 17-1/2" (44.5 cm)
Depth: 7-1/8" (18.1 cm)
7-1/8"
(18.1 cm)
4"
(10.2 cm)
17-1/2"
(44.5 cm)
LISTING — UL 1572 listed for wet locations. Listed and labeled to
comply with Canadian Standards (see Options).
ORDERING INFORMATION
Example:
KAD 400M R2 120 SPD04
Choose the boldface catalog nomenclature that best suits your needs and write
it on the appropriate line. Order accessories as separate catalog number.
Series
KAD
KAD
KAD
KAD
KAD
KAD
KAD
KAD
Voltage
100M
150M
175M
200M
250M
320M1
350M1
400M1
Distribution
Hydroformed Reflectors
R2
IES type II asymmetric2
R3
IES type III asymmetric2
R4
IES type IV forward throw2
R5S IES type V square
Segmented Reflectors
SR2 IES type II asymmetric2
SR3 IES type III asymmetric2
SR4SC IES type IV forward throw
120
2083
2403
277
347
4803
TB 4
SPD04 Square pole (4" arm)
(standard)
SPD09 Square pole (9 " arm)5
RPD04 Round pole (4" arm)
RPDO9 Round pole (9" arm)5
WWDO4 Wood pole or wall (4" arm)
WWDO9 Wood pole or wall (9"
arm) 5,6
WBDO4 Wall bracket (4" arm)6
WBD09 Wall bracket (9” arm)6
L/Arm (When ordering KMA,
DAD12)
Shipped Separately
KMA Mast arm adapter
KTMB Twin mounting bar
DAD12P Degree Arm (pole)
DAD12WB Degree Arm (wall)
NOTES:
1 Reduced jacket ED28 lamp must be used with SR2, SR3
& SR4SC optics.
2 House side shield available.
3 Consut factory for availability in Canada.
4 Optional multi-tap ballast (120, 208, 240, 277V).
5 The SPD09, RPD09 or WWD09 must be used when two or
more luminaires are oriented on a 90° drilling pattern.
6 May be ordered as accessory.
7 QRSTD available in select wattages; consult factory.
8 Additional architectural colors available; please see
Architectural Colors brochure, form no. 794.3.
9 Must use RPD09.
10 Only available with SR2, SR3 and SR4SC optics.
OUTDOOR
Options
Mounting
Shipped Installed In Fixture
SF Single fuse (120, 277, 347V, n/a TB)
DF Double fuse (208, 240, 480V, n/a TB)
PER NEMA twist-lock receptacle
only (no photocontrol)
LPI Lamp included
PD Power Tray10
WTB Terminal Wiring Block10
QRS Quartz restrike system (250W
maximum, lamp not included)7
CSA Listed and labeled to comply with
Canadian Standards
SCWA Super CWA Pulse Start Ballast (n/a
100W & 175W)
Shipped Separately 6
PE1 NEMA twist-lock PE (120, 208, 240V)
PE3 NEMA twist-lock PE (347V)
HS House side shield (R2,R3, R4)
(SR2, SR3)
KADVG Vandal guard
KADWG Wire guard
Architectural Colors 8
Standard Colors
DDB Dark bronze
(standard)
DWH White
DBL Black
Classic Colors
DMB Medium bronze
DNA Natural aluminum
DSS Sandstone
DGC Charcoal gray
DTG Tennis green
DBR Bright red
DSB Steel blue
Accessories: Tenon Mounting Slipfitter
Order as separate catalog number.
Number of fixtures
Tenon O.D. One
2-3/8"
T20-190
2-7/8"
T25-190
4"
T35-190
Two@180° Two@90° Three@120° Three@90°
T20-280
T20-2909
T20-3209
T20-3909
T25-280
T25-2909
T25-320
T25-3909
T35-280
T35-2909
T35-320
T35-3909
Sheet#: KAD-M
Four@90°
T20-4909
T25-4909
T35-4909
AL - 370
KAD 400M Arm-mounted Soft Square Cutoff
Coefficient of Utilization
Initial Footcandles
KAD R3 Test no. 1192040902
.3
.4
COEFFICIENT OF UTILIZATION
.5
0
.6
2
1
0
5
1
2.5
1
0.5
0.25
0.1
2
3
.1
.2
.3
.4
.5
.6
2
1
0
5
1
2.5
1
0.5
0.25
0.1
2
3
1
2
3
4
5
0
6
400W Metal Halide lamp, 32,000 rated
lumens, Footcandle values based on 30’
mounting height, Distribution Type II, cutoff.
KAD R4
1
KAD R4HS
Test no. 1191110101
.2
.3
.4
.6
2
1
0
5
1
2.5
2
1
0.5
0.25
0.1
3
4
0
1
2
3
4
5
.2
.3
.4
.5
.6
2
1
0
5
2.5
1
1
0.5
0.25
0.1
2
3
3
4
5
4
6
0
1
0
6
400W Metal Halide lamp, 32,000 rated lumens,
Footcandle values based on 30’ mounting height,
Distribution Type IV, cutoff.
.1
.2
KAD R5S
Test no. 1192061101
.3
.4
.6
2
0
5
1
2.5
2
1
0.5
0.25
0.1
3
4
1
2
3
4
3
4
5
6
Test no. 1193111901
.5
1
0
2
Distribution Type III, cutoff.
.5
DISTANCE IN UNITS OF MOUNTING HEIGHT
.1
2
Footcandle values based on 30’ mounting
height, Distribution Type III, cutoff.
0
.1
4
4
0
0
.2
.1
0
KAD R3 RJ Test no. 1192041502
5
0
6
Footcandle values based on 30’ mounting
height, Distribution Type IV, cutoff.
.1
.2
.3
.4
.5
.6
2
1
0
5
2.5
1
0.5
1
2
0.25
0.1
3
4
0
1
2
3
4
5
Test no. 1193083101
KAD R2
6
Distribution Type V, cutoff.
Electrical Characteristics
Line current
Primary
Primary
(Amps)
dropout
Wattage/ballast voltage Start/Operating voltage
120
2.50/4.00
55
400CWA
208
1.45/2.30
95
Peak-lead
240
1.25/2.00
110
Autotransformer 277
1.10/1.75
125
480
.73/1.00
225
Input Power
Regulation
watts factor (%) Line V = Lamp lumens
455
90+
±10% = ±10%
Mounting Height Correction Factor
(Multiply the fc level by the correction factor)
25 ft. = 1.44
35 ft. = 0.73
40 ft. = .56
Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating
factors can cause differences between laboratory data and actual field measurements. Dimensions and
specifications on this sheet are based on the most current available data and are subject to change
without notice.
Notes:
1 Photometric data for other distributions can be accessed from the Lithonia Lighting website.
(www.lithonia.com)
Lithonia Lighting
KAD-M
©2000 Lithonia Lighting, Rev. 8/02 KAD-M.P65
Acuity Lighting Group, Inc.
Outdoor Lighting
One Lithonia Way, Conyers, GA 30012-3957
Phone: 770-922-9000 Fax: 770-918-1209
In Canada: 1100 50th Ave., Lachine, Quebec H8T 2V3
www.lithonia.com
General Information — Poles
(Poles are available only in U.S.)
All luminaire/pole assemblies require proper evaluation
to ensure that the structural integrity of the assembly is
not compromised when applied in specific wind
conditions. Therefore, the basis for pole selection in this
catalog is total weight and effective projected area,
EPA (ft2), shown on the individual pole catalog pages.
Determination of maximum EPA (ft2) and weight loading
must include all luminaires, bracketry, signs, decoration,
overhead wire or other equipment that will be mounted
to the subject pole. Luminaire EPA (ft2) and weight data
are found on their respective product pages.
The total effective projected area of the luminaires and
brackets shall not exceed the EPA (ft2) listed for the pole
selected at a given wind velocity. The map on page 357
gives the wind velocities to be used in determining
luminaire pole compatibility. Poles that are to be located
in areas of known abnormal conditions will require
special consideration. Lighting standards are designed
for ground mounted applications. Special consideration
should be given but not limited to areas with constant
winds, airports, coastal areas, areas of unusual wind
patterns, standards mounted on structures such as
buildings, bridges or parking decks and any area that
has experienced previous problems. Heavier poles and
or vibration dampers may be necessary in these
circumstances. Contact Lithonia Lighting for
recommendations on lighting standards in areas of
question.
Pole Selection Procedure
Step 1.
Step 2.
Step 3.
Step 4.
Step 5.
NOTE: If during the pole warranty period of one year,
the product proves defective in material or
workmanship, the company shall correct, at its option,
by repairing or replacing at no charge to the purchaser,
if the purchaser promptly notifies the company. This
warranty specifically excludes fatigue failure or
similar phenomena resulting from induced vibration
harmonic oscillation or resonance associated with
the movement of air currents around the product.
Select the luminaire and decide how many will be mounted per pole. Determine the Effective Projected Area, EPA (ft2), which is given on the dimensional
information table.
Determine the appropriate mounting method for the luminaire. Options include arm, bracket or wall mounting.
Add together the EPA's (ft2) of the luminaire and arm/bracket. Multiply by
number of fixtures to be mounted on one pole.
Consult the Wind Map on page 357 to determine the basic wind velocity for
your area. Special consideration should be given but not limited to areas with
constant winds, airports, coastal areas, areas of unusual wind patterns, standards mounted on structures such as buildings, bridges or parking decks and
any area that has experienced previous problems. Heavier poles and or
vibration dampers may be necessary in these circumstances. Contact Lithonia Lighting for recommendations on lighting standards in areas of question.
Select the material (steel or aluminum) and shape (square or round) of the
pole. Refer to the “Technical Information” chart on the appropriate pole page.
A. Find the desired nominal mounting height in the second column.
B. Verify that the fixture weight does not exceed the maximum number listed.
C. Compare your total EPA (ft2) loading with the maximum EPA (ft2) value found
in the wind speed column for your area. Check that the equipment you are
using will not exceed this value.
D. If both the weight and EPA (ft2) values do not exceed for which the pole is
rated, you have selected the correct pole. If, however, either one of those
numbers exceeds the maximum rated values, compare the EPA (ft2) and
fixture weight loads to the next larger pole of the same mounting height.
CAUTION: This pole selection process is a guideline only. Lithonia Lighting assumes no responsibility for
selection and recommends consultation with qualified individuals for verification of luminaire/pole
assembly selection.
Ordering Information
Shaft type
Example: SSA 16 4G DM19 DMB
Nominal
mounting
height
RTA Round tapered aluminum
RTAFP Round tapered alum. flag
8–50 feet
pole
Sportslighting
RTAU Pole / Mounting arm
poles up to
combo
115'.
RSA Round straight aluminum
RSAH Round straight aluminum
See submittal
hinged
sheets for
SSA Square straight aluminum
specific
SSAH Square straight aluminum
information.
hinged
RTS Round tapered steel
RTSU Pole / Mounting arm combo
STS Square tapered steel
STSH Square tapered steel
hinged
RSS Round straight steel
SSS Square straight steel
SSF Square straight fiberglass
RTF Round tapered fiberglass
RTFDB Round tapered fiberglass
direct burial
SPRTC Round tapered concrete
sportslighting
STC Square tapered concrete
SPRTS Round tapered steel
sportslighting
Nominal shaft base
size/wall thickness
(in.)
4
5
6
7
8
9
10
C
E
G
J
K
L
P
0.125
0.156
0.188
0.250
0.312
0.219
0.375
Fixture mounting method
PT Only open-top pole
Tenon Mounting
T20
T25
T30
T35
2-3/8" O.D. (2" NPS)
2-7/8" O.D. (2-1/2" NPS)
3-1/2" O.D. (3" NPS)
4" O.D. (3-1/2" NPS)
Drill Mounting
DM19
DM28
DM29
DM39
DM49
DM32
1 at 90°
2 at 180°
2 at 90°
3 at 90°
4 at 90°
3 at 120° (Round Poles)
Aeris Drill Mounting
DM19AS
DM28AS
DM29AS
DM39AS
DM49AS
DM32AS
1 at 90°
2 at 180°
2 at 90°
3 at 90°
4 at 90°
3 at 120° (Round Poles)
Option
See page
369
Finish
Architectural Colors1
Polyester Powder
Standard Colors
DDB Dark bronze
DWH White
DBL Black
BA Brushed
Aluminum 2
Classic Colors
DMB Medium bronze
DNA Natural
aluminum
DSS Sandstone
DGC Charcoal gray
DTG Tennis green
DBR Bright red
DSB Steel blue
Class 1 Architectural
Anodize (RTA, RSA, SSA
only)
ABL Black
ADB Dark bronze
ANA Natural
NOTES:
1
Additional architectural colors available. See Architectural Colors
brochure.
2
Aluminum poles only.
Sheet#: Pole-Info
PL-105
Rev. 3/02 Pole-Info.P65
Catalog Number
Notes
Type
CONSTRUCTION
Anchor Base Poles
Weldable-grade, hot-rolled, commercial-quality carbon steel tubing with
a minimum yield of 55,000 psi (11-gauge), 50,000 psi (7-gauge). Uniform
wall thickness of .125" or .188". Shafts are one-piece with a longitudinal
electric resistance weld. Uniformly square in cross-section with flat sides,
small corner radii and excellent torsion. Available shaft widths are 4", 5"
and 6".
SQUARE STRAIGHT STEEL
Anchor base is fabricated from hot-rolled carbon steel plate that meets
or exceeds a minimum yield strength of 36,000 psi. The anchor base is
provided with slotted holes. Base cover is finished to match pole.
A
SSS
A handhole having nominal dimensions of 3" x 5" for all shafts. Included is
a cover with attachment screws.
Top cap provided with all drill-mount poles.
Fasteners are high-strength galvanized zinc-plated or stainless steel.
FINISH — Dark bronze (DDB) polyester powder standard. Other architectural colors available.
GROUNDING — A nut holder located immediately inside the handhole rim is
provided with a 1/2" – 13 UNC ground bolt and nut.
ANCHOR BOLTS — Top protion of anchor bolt is galvanized per ASTM A153. Made of steel rod having a minimum yield strength of 55,000 psi.
Example: SSS 20 5C DM19 DDB
Choose the boldface catalog nomenclature that best suits your needs and
write it in the appropriate blank.
SSS
Shaft type
SSS
Nominal shaft
length
Nominal shaft base size/
wall thickness
10 – 39 feet
(See back page.)
(See back page.)
HANDHOLE ORIENTATION
C
A
Handhole
NOTES:
1 When ordering tenon mounting and drill mounting for the same
pole, follow this example: DM28/T20. The combination requires an
extra handhole.
2 3-1/2" and 4" tenons available on 5" and 6" shafts only.
3 The drilling template to be used for a particular luminaire depends
on the luminaire that is used. Refer to the Technical Data Section
of the Outdoor Binder for Drilling Templates.
4 Specify location and orientation when ordering option.
For 1st "x":
Specify the height in feet above base of pole.
Example: 5ft = 5 and 20ft = 20
For 2nd "x":
Specify orientation from handhole (A,B,C,D)
Refer to the Handhole Orientation diagram on this page.
5 Horizontal arm is 18" x 2-3/8" O.D. tenon standard.
6 Combination of tenon-top and drill mount requires extra handhole.
7 Additional colors available; see Architectural Colors brochure,
form no. 794.3.
Outdoor
PT
T20
T25
T30 2
T35 2
DM19
DM28
DM28PL
B
D
Mounting1
DM29
DM39
DM49
DM19AS
DM28AS
DM29AS
DM39AS
DM49AS
Options
Shipped Installed
Architectural Colors
Tenon Mounting
(powder finish)7
L/AB Less Anchor Bolts
Open top
VD Vibration Damper Standard Colors
2-3/8" O.D. (2" NPS)
TP Tamper Proof
DDB Dark bronze
2-7/8" O.D. (2-1/2" NPS)
Hxx4,5 Horizontal Arm
DWH White
3-1/2" O.D. (3" NPS)
Bracket (1 fixture)
DBL Black
FDLxx4 Festoon Outlet less
4" O.D. (3-1/2" NPS)
Classic Colors
electrical
3
Drill Mounting
FGLxx4 Festoon GFI Outlet
DMB Medium bronze
1 at 90°
less electrical
DNA Natural
4
2 at 180°
12CPxx 1/2" Coupling
aluminum
2 at 180° with one side 34CPxx4 3/4" Coupling
DSS Sandstone
plugged
1CPxx4 1" Coupling
DGC Charcoal gray
2 at 90°
12NPxx4 1/2" Threaded Nipple
DTG Tennis green
4
3 at 90°
34NPxx 3/4" Threaded Nipple
DBR Bright red
1NPxx4 1" Threaded Nipple
4 at 90°
DSB Steel blue
4,6
Extra Handhole
Aeris Drill Mounting3 HHxx
GALV Galvanized
1 at 90°
finish
2 at 180°
2 at 90°
3 at 90°
4 at 90°
IMPORTANT INSTALLATION NOTES:
• Do not erect poles without having fixtures installed.
• Factory-supplied templates must be used when setting anchor
bolts. Lithonia will not accept claim for incorrect anchorage
placement due to failure to use factory template.
• If poles are stored outside, all protective wrapping must be
removed immediately to prevent finish damage.
• Lithonia is not responsible for the foundation design.
• Installation requires grout to be packed under base to ensure
full contact with foundation.
Sheet#: Pole-SSS
PL - 320
SSS Square Straight Steel Poles
TECHNICAL INFORMATION
EPA (ft2) with 1.3 gust
Catalog
Number
Nominal
Wall
shaft
Pole Shaft Thickness
80 Max. 90
Max. 100 Max.
length (feet) Size(in x in x ft) (inches) Gauge mph weight mph weight mph weight
Bolt Circle
(inches)
Bolt Size
(in. x in. x in.)
Approximate
ship weight
(pounds)
SSS 10 4C
10
4.0 x 10.0
0.125
11
30.6
765
23.8
595
18.9
473
8--9
3/4 x 18 x 3
75
SSS 12 4C
12
4.0 x 12.0
0.125
11
24.4
610
18.8
470
14.8
370
8--9
3/4 x 18 x 3
90
SSS 14 4C
14
4.0 x 14.0
0.125
11
19.9
498
15.1
378
11.7
293
8--9
3/4 x 18 x 3
100
SSS 16 4C
16
4.0 x 16.0
0.125
11
15.9
398
11.8
295
8.9
223
8--9
3/4 x 18 x 3
115
SSS 18 4C
18
4.0 x 18.0
0.125
11
12.6
315
9.2
230
6.7
168
8--9
3/4 x 18 x 3
125
SSS 20 4C
20
4.0 x 20.0
0.125
11
9.6
240
6.7
167
4.5
150
8--9
3/4 x 18 x 3
140
SSS 20 4G
20
4.0 x 20.0
0.188
7
16.5
415
12.25
310
9.3
240
8--9
3/4 x 30 x 3
198
SSS 20 5C
20
5.0 x 20.0
0.125
11
17.7
443
12.7
343
9.4
235
10--12
1 x 36 x 4
185
SSS 20 5G
20
5.0 x 20.0
0.188
7
28.1
703
21.4
535
16.2
405
10--12
1 x 36 x 4
265
SSS 25 4C
25
4.0 x 25.0
0.125
11
4.8
150
2.6
100
1.0
50
8--9
3/4 x 18 x 3
170
SSS 25 4G
25
4.0 x 25.0
0.188
7
10.8
270
7.7
188
5.4
135
8--9
3/4 x 30 x 3
245
SSS 25 5C
25
5.0 x 25.0
0.125
11
9.8
245
6.3
157
3.7
150
10--12
1 x 36 x 4
225
SSS 25 5G
25
5.0 x 25.0
0.188
7
18.0
350
12.6
350
9.0
250
10--12
1 x 36 x 4
320
SSS 30 4G
30
4.0 x 30.0
0.188
7
6.4
160
4.0
100
2.3
58
8--9
3/4 x 30 x 3
295
SSS 30 5C
30
5.0 x 30.0
0.125
11
4.7
150
2.0
50
--
--
10--12
1 x 36 x 4
265
SSS 30 5G
30
5.0 x 30.0
0.188
7
10.7
267
6.7
167
3.9
100
10--12
1 x 36 x 4
380
SSS 30 6G
30
6.0 x 30.0
0.188
7
15.7
392
10.2
257
6.4
160
11--13
1 x 36 x 4
520
SSS 35 5G
35
5.0 x 35.0
0.188
7
5.9
150
2.5
100
--
--
10--12
1 x 36 x 4
440
SSS 35 6G
35
6.0 x 35.0
0.188
7
9.5
237
5.0
150
1.8
50
11--13
1 x 36 x 4
540
SSS 39 6G
39
6.0 x 39.0
0.188
7
5.1
128
1.3
33
--
--
11--13
1 x 36 x 4
605
A
B
C
Shaft Bolt
Base Circle
Size
A
Bolt
Projection
B
Base Anchor Warehouse Template
Square
Bolt
Anchor Bolt Number
C
Description Description
4"C
4"G
5"
6"
2-3/4"–4"
2-3/4"–4"
3-3/8"–4"
3-3/8"–4"
8"
8"
11"
12-1/2"
8-1/2"
8-1/2"
10"–12"
11"–13"
ABSSS-4C
ABSSS-4G
ABSSS-5
ABSSS-6
AB18-0
AB30-0
AB36-0
AB36-0
PJ50004
PJ50004
PJ50010
PJ50011
BASE DETAIL
18"
IMPORTANT:
• These specifications are intended for general purposes only. Lithonia reserves the right
to change material or design, without prior notice, in a continuing effort to upgrade its
products.
Lithonia Lighting
Sheet #: Pole-SSS
©1994 Lithonia Lighting, Rev. 6/02
Pole-SSS.P65
Outdoor Lighting
One Lithonia Way, Conyers, GA 30012
Phone: 770-922-9000 Fax: 770-918-1209
www.lithonia.com
Catalog Number
Notes
Type
INTENDED USE — Streets, walkways, parking lots and surrounding areas.
CONSTRUCTION — Rugged, die-cast, single-piece aluminum housing with
nominal wall thickness of 1/8”. Die-cast door frame has impact-resistant,
tempered, glass lens (3/16” thick). Door frame is fully gasketed with onepiece tubular silicone and has tool-less entry and resealing. US. Patent
No. D447,590. Canada Patent No. 94324.
FINISH — Standard finish is dark bronze (DDB) polyester powder finish, with
other architectural colors available.
OPTICAL SYSTEM — Anodized segmented reflectors for superior uniformity
and control. Reflectors attach with tool-less fasteners and are rotatable
and interchangeable. Five cutoff distributions available: Type II (roadway),
Type III (asymmetric), Type IV (forward throw), Type IV (wide, forward
throw) and Type V (symmetric square).
ELECTRICAL SYSTEM — Ballast is constant-wattage autotransformer ballast
standard. 200W, 320W and 350W require Super CWA Pulse Start ballast
(must order SCWA option). All ballasts are mounted on a removable
power tray with tool-less latch and have positive locking disconnect
plugs. Ballasts are copper-wound and 100% factory-tested. Porcelain,
mogul-base socket with copper alloy, nickel-plated screw shell and center contact. UL listed.
INSTALLATION — Integral arm for pole or wall mounting. Optional mountings
available.
LISTING — UL Listed (standard). CSA Certified or NOM Certified (see Options).
UL listed suitable for wet locations (damp location listed in lens-up orientation). IP rated.
Architectural Area & Roadway Lighting
AS2
METAL HALIDE
200W, 250W, 320W, 350W, 400W
10' to 35' Mounting
TM
A-ALT
Specifications
EPA: 1.2 ft2
Length: 28.0 (71.0 cm)
Width: 16.5 (41.9 cm)
Depth: 8.3 (21.0 cm)
Weight: 45 lbs (20.4 kg)
All dimensions are inches (centimeters) unless otherwise specified.
Example:
AS2 250M SR4SC 120 SPA SF DNA LPI
Choose the boldface catalog nomenclature that best suits your needs and write it on the appropriate line.
Order accessories as separate catalog number.
Series
AS2
AS2
AS2
AS2
AS2
Mounting
Voltage
200M
250M
320M
350M1
400M1
120
2082
2402
277
347
4802
TB3
Distribution
SR2 Segmented Type II roadway
SR3 Segmented Type III asymmetric
SR4SC Segmented Type IV forward
throw, sharp cutoff
SR4W Segmented Type IV wide,
forward throw
SR5S Segmented Type V square
Square pole mounting (std)
Round pole mounting
Wall bracket (up or down)4
Mast arm adapter5
Decorative straight arm,
square pole only5
DCAS2 Decorative curved arm,
square pole only5
Note: AerisTM has a unique drilling
template that requires an Aeris
drilling pattern to be specified when
ordering poles. See example below.
Example: SSA 20 4C DM19AS DDB
Aeris Drilling Pattern
DM19AS 1 at 90 degrees
DM32AS 3 at 120 degrees (round
poles only)
NOTES:
1 Must use reduced jacket lamp ED28.
2 Consult factory for availability in Canada.
3 Optional multi-tap ballast (120, 208, 240, 277V) (120, 277,
347V in Canada).
4 Mounted in lens-up orientaion, fixture is damp location listed.
5 Shipped separately.
6 Consult factory for availability.
7 May be ordered as an accessory.
8 Additional architectural colors available; see
www.lithonia.com for more information.
9 Not available with 400M and 480V.
Outdoor
Options
SPA
RPA
WBA
ASKMA2
DSAS2
SF
DF
PER
CR
QRS
HS
EC
TP
CSA
NOM
SCWA
LPI
L/LP
PE1
PE3
PE4
PE7
AS2VG
SC
Shipped Installed
Architectural Colors 8
Single fuse (120, 277, 347, n/a TB) Standard Colors
Double fuse (208, 240, 480V, n/a TB) DDB Dark bronze
(standard)
NEMA twist-lock receptacle only
(no photocontrol)
DWH White
Corrosion-resistant finish
DBL Black
Quartz restrike system (250W
Textured Colors
maximum, lamp not included)
DSPD Dark gray
Houseside shield (SR2, SR3, SR4W) DSPJ Light gray
Emergency circuit
DBLB Black
Tamper proof
DWHGWhite
CSA Certified
DBNH Dark bronze
NOM Certified6
DSPE Green
Super CWA Pulse Start ballast9
DSPG Dark red
Lamp included (standard)
DSPH Red
Less lamp
DSPF Rust
Shipped Separately 7
NEMA twist-lock PE (120, 208, 240V)
NEMA twist-lock PE (347V)
Vandal guard
Shorting Cap for PER option
Accessories: Tenon Mounting Slipfitter
Order as separate catalog number. Must be used with round pole mounting (RPA).
Number of fixtures
Tenon O.D. One
2-3/8" AST20-190
2-7/8" AST25-190
4"
AST35-190
Two@180° Two@90° Three@120° Three@90° Four@90°
AST20-280
n/a
AST20-320
n/a
n/a
AST25-280 AST25-290 AST25-320 AST25-390 AST25-490
AST35-280 AST35-290 AST35-320 AST35-390 AST35-490
Sheet #: AS2-M
AL-130
AS2 Metal Halide Area Lighting
Coefficient of Utilization
Initial Footcandles
NOTES:
1 Photometric data for other distributions can be accessed
from the Lithonia Lighting web site (www.lithonia.com).
2 For electrical characteristics consult technical data tab.
3 Tested to current IESNA and NEMA standards under
stabilized laboratory conditions. Various operating factors
can cause differences between laboratory and actual field
measurements. Dimensions and specifications are based
on the most current data and are subject to change.
Mounting Height Correction Factor
(Multiply the fc level by the correction factor)
10 ft. = 12.25
15 ft. = 5.4
30 ft. = 1.36
40ft.
= 0.77
Lithonia Lighting
Sheet #: AS2-M
©2002 Acuity Lighting Group, Inc., Rev. 6/02
AS2-M.P65
Outdoor Lighting
One Lithonia Way, Conyers, GA 30012
Phone: 770-922-9000 Fax: 770-918-1209
www.lithonia.com
LSI ARCHITECTURAL OUTDOOR
DECORATIVE AREA LIGHTING
GREENLEE LIFESTYLE SERIES (Various reflectors are protected by U.S. Patent No. 6,464,378.)
G
LAMP TYPES: Standard or Pulse Start Metal Halide, High Pressure Sodium,
and Compact Fluorescent.
SHADE AND CROWN: Die Cast Aluminum.
BRACKETS: Brackets are extruded and cast aluminum assemblies or fabrications. All
decorative elements are die cast or extruded aluminum.
FINISH: Available in silver gray metallic, satin verde green, bronze, black, white or buff
polyester powder coat.
LENS: Flat or Contoured tempered glass lenses are available. Lens is sealed to the lens
frame casting.
GASKETS AND SEALS: Silicone gaskets seal the lens to the housing and the crown to the
shade. All gaskets and seals are extruded, molded or die cut silicone.
LSBV CC S
OPTICS: Four distributions - Type II, III, V, and Forward Throw Perimeter. Shade attachment
allows field orientation of optics in 90° increments.
LAMPHOLDER: Matched to the lamp. Glazed porcelain, medium or mogul base, 4KV pulse
rated with spring center contact.
BALLASTS: High power factor for -20°F starting is standard. Universal electronic for
120-277V, 50 or 60HZ operation is available for some wattages.
COLOR BANDS: Accent color decals are available in nine colors, and guaranteed for five
years against peeling, cracking, or fading.
FASTENERS: All exposed fasteners are black oxide coated stainless steel.
BASE COVER: Optional Decorative or Contemporary base covers have two-piece die cast
construction with stainless steel fasteners. Base covers are polyester powder coated to
match pole.
LSAN CH D180
CROWN DIMENSIONS
S = Small M = Medium
8.00"∅S
9.00"∅M
8.00"∅S
9.00"∅M
12.03" S
13.53" M
8.00"∅S
9.00"∅M
12.03"S
13.53"M
12.00" S
13.50" M
N-NON LUMINOUS
H-HORIZONTAL LOUVER
V-VERTICAL LOUVER
LSFH CC D180
Flat-lensed fixtures
meet IESNA
full cutoff
classification.
SHADE DIMENSIONS
S = Small M = Medium
F-FLARED SHADE
A-ANGLE SHADE
7.52" S
8.52" M
19.50"∅S
23.00"∅M
B-BELL SHADE
7.52" S
8.52" M
7.52" S
8.52" M
22.00"∅S
25.50"∅M
19.50"∅S
23.00"∅M
wet location
© 2004 LSI INDUSTRIES INC.
Project Name
Catalog #
Fixture Type
GREENLEE LIFESTYLE SERIES (Various reflectors are protected by U.S. Patent No. 6,464,378.)
3MH 2MH 1MH
0 3MH
3MH 2MH 1MH
F
E
LS 175MH TYPE 2 OPTICS
0 3MH
D
2MH
LS 175MH Type 5 Optics
C
D
LS175MH TYPE 5 OPTICS
2MH
1MH
1MH
C
B
A
0
B
A
1MH
2MH
3MH
Mounting
Height
10'
12'
14'
16'
18'
20'
24'
Lifestyle Small
A
B
C
D
12.80 5.12 2.56 1.28
8.89 3.56 1.78 0.89
6.53 2.61 1.31 0.65
5.00 2.00 1.00 0.50
3.95 1.58 0.79 0.40
3.20 1.28 0.64 0.32
2.22 0.89 0.44 0.22
E
0.51
0.36
0.26
0.20
0.16
0.13
0.09
F
0.26
0.18
0.13
0.10
0.08
0.06
0.04
0
1MH
2MH
3MH
Mounting
Height
10'
12'
14'
16'
18'
20'
24'
A
12.80
8.89
6.53
5.00
3.95
3.20
2.22
Lifestyle Small
B
C
D
5.12 2.56 1.28
3.56 1.78 0.89
2.61 1.31 0.65
2.00 1.00 0.50
1.58 0.79 0.40
1.28 0.64 0.32
0.89 0.44 0.22
E
0.51
0.36
0.26
0.20
0.16
0.13
0.09
F
0.26
0.18
0.13
0.10
0.08
0.06
0.04
Front
Front
3MH 2MH 1MH
0 3MH
0 3MH
3MH 2MH 1MH
2MH
D
C
LS175MH TYPE FP OPTICS
LS 175MH Type 3 Optics
E
D
C
1MH
B
1MH
2MH
3MH
LM 320 PSMH Type FP Optics
1MH
B
0
A
2MH
0
Mounting
Height
10'
12'
14'
16'
18'
20'
24'
Lifestyle Small
A
B
C
D
12.80 5.12 2.56 1.28
8.89 3.56 1.78 0.89
6.53 2.61 1.31 0.65
5.00 2.00 1.00 0.50
3.95 1.58 0.79 0.40
3.20 1.28 0.64 0.32
2.22 0.89 0.44 0.22
A
E
0.51
0.36
0.26
0.20
0.16
0.13
0.09
F
0.26
0.18
0.13
0.10
0.08
0.06
0.04
1MH
2MH
3MH
Front
Mounting
Height
10'
12'
14'
16'
18'
20'
24'
A
28.80
20.00
14.69
11.25
8.89
7.20
5.00
Lifestyle Medium
B
C
D
11.52 5.76 2.88
8.00 4.00 2.00
5.88 2.94 1.47
4.50 2.25 1.13
3.56 1.78 0.89
2.88 1.44 0.72
2.00 1.00 0.50
E
1.15
0.80
0.59
0.45
0.36
0.29
0.20
F
0.58
0.40
0.29
0.23
0.18
0.14
0.10
Front
3MH 2MH 1MH
0 3MH
F
2MH
E
D
3MH 2MH 1MH
E
D
LM 320 PSMH TYPE 2 OPTICS
LM 320 PSMH Type 2 Optics
C
B
A
1MH
C
B
1MH
2MH
3MH
2MH
1MH
0
0
A
0 3MH
Mounting
Height
10'
12'
14'
16'
18'
20'
24'
A
28.80
20.00
14.69
11.25
8.89
7.20
5.00
Lifestyle Medium
B
C
D
11.52 5.76 2.88
8.00 4.00 2.00
5.88 2.94 1.47
4.50 2.25 1.13
3.56 1.78 0.89
2.88 1.44 0.72
2.00 1.00 0.50
E
1.15
0.80
0.59
0.45
0.36
0.29
0.20
1MH
F
0.58
0.40
0.29
0.23
0.18
0.14
0.10
2MH
3MH
Mounting
Height
10'
12'
14'
16'
18'
20'
24'
A
28.80
20.00
14.69
11.25
8.89
7.20
5.00
Lifestyle Medium
B
C
D
11.52 5.76 2.88
8.00 4.00 2.00
5.88 2.94 1.47
4.50 2.25 1.13
3.56 1.78 0.89
2.88 1.44 0.72
2.00 1.00 0.50
E
1.15
0.80
0.59
0.45
0.36
0.29
0.20
F
0.58
0.40
0.29
0.23
0.18
0.14
0.10
Front
Front
3MH 2MH 1MH
0 3MH
2MH
E
D
C
3MH 2MH 1MH
0 3MH
E
D
C
1MH
2MH
LM 320 PSMH TYPE FP OPTICS
LM 320 PSMH Type FP Optics
1MH
B
B
0
0
A
1MH
2MH
3MH
A
Mounting
Height
10'
12'
14'
16'
18'
20'
24'
A
28.80
20.00
14.69
11.25
8.89
7.20
5.00
Lifestyle Medium
B
C
D
11.52 5.76 2.88
8.00 4.00 2.00
5.88 2.94 1.47
4.50 2.25 1.13
3.56 1.78 0.89
2.88 1.44 0.72
2.00 1.00 0.50
E
1.15
0.80
0.59
0.45
0.36
0.29
0.20
1MH
F
0.58
0.40
0.29
0.23
0.18
0.14
0.10
2MH
3MH
Mounting
Height
10'
12'
14'
16'
18'
20'
24'
A
28.80
20.00
14.69
11.25
8.89
7.20
5.00
Lifestyle Medium
B
C
D
11.52 5.76 2.88
8.00 4.00 2.00
5.88 2.94 1.47
4.50 2.25 1.13
3.56 1.78 0.89
2.88 1.44 0.72
2.00 1.00 0.50
E
1.15
0.80
0.59
0.45
0.36
0.29
0.20
F
0.58
0.40
0.29
0.23
0.18
0.14
0.10
Front
Front
Project Name
Catalog #
Fixture Type
LS 175MH TYPE 3 OPTICS
E
F
E
Series
Wattage/
Lamp Type
Crown
Shade
LS
Lifestyle
Series
Small
A
B
F
Voltage
Optics
MT – Multi-Tap1
50, 70, 100, 150, 175 MH
E-17 Medium Base
N
H
V
2– Type II
3– Type III
TT –
FP – Forward
(Magnetic Ballast
Throw
is not available in
Perimeter
50, 70, 150MH or 5 – Type V
50 HPS)
Tri-Tap2
50, 70, 100, 150, HPS
E-17 Medium Base
42 CFL GX 24q–4
Type V Optics only
Lens
Finish
F– Flat Lens
(provides
full cut off)
CT – Contoured
Clear
Tempered
Glass
SGM – Silver Grey Metallic
SVG – Satin Verde Green
BLK – Black
BRZ – Bronze
BUF – Buff
WHT – White
F
SGM
UE – Electronic
Universal
Electronic
120-277 V
50 or 60 HZ
A
B
F
LM
Lifestyle
Series
Medium
GREENLEE LIFESTYLE SERIES
LS
N
H
V
B
250, 400 MHR
Reduced MH-Mogul
Base
250, 320, 350, PSMH
Pulse Start Metal Halide
250, 400 HPS
High Pressure Sodium
(Requires contoured
lens)
V
175MH
MT
3
CHD
Classic Hook Double
CHS
Classic Hook Single
CHW
Classic Hook Wall Mount
CHW
Side Arm Double
SCD
Straight Clevis Double
SCS
Straight Clevis Single
SCW
Straight Clevis Wall Mount
PT
Post Top
Project Name
Catalog #
Fixture Type
GREENLEE LIFESTYLE SERIES
Style
94
CC – Curved Clevis
CH – Classic Hook
PA – Parallel Arm
PM – Pendant Mount
PT – Post Top
SA – Side Arm
SC – Straight Clevis
SA
Pole
Diameter
Pole
Material
4”
5”
S10G
S7G
S11G
W – Wall Mount
S – Single
D180° – Double
D90º – Double
T90º – Triple
T120° – Triple
Q90° – Quad
S
4
S10G
Pole
Height
10’
12’
14’
16’
18’
20’
24’
16
Pole Option/
Accessory
DBC
Decorative
Base Cover
CBC
Contemporary
Base Cover
GFR-GFCI
Duplex Receptacle
WPR
Weather Proof Receptacle
DBC
FOOTNOTES:
1- MT – Multi Tap is shipped standard unless otherwise specified. Multi Tap consists of 120V, 208V, 240V, and 277V. Multi Tap is pre-wired for highest voltage.
Alternate voltages will require field re-wiring.
2- Tri-Tap is shipped standard for Canadian applications. Tri-Tap consists of 120V, 277V, and 347V. Tri-Tap is pre-wired for highest voltage.
Alternate voltages will require field re-wiring.
SAS
Side Arm Single
SAW
Side Arm Wall Mount
CCD
Curved Clevis Double
CCS
Curved Clevis Single
PAD
Parrallel Arm Double
PAS
PArallel Arm Single
PAW
Parallel Arm Wall Mount
CCW
Curved Clevis Wall Mount
Project Name
Catalog #
Fixture Type
LL – Less Lamp
PC120 – 120Volt Photocell
PCHV – 208- 277V Photocell
RGS – Rock Guard Stainless (Not
available with PT)
EQ – Emergency Quartz (Separate
Circuit)
SQN – Standby Quartz non time
delay
SQT– Standby Quartz time delay
Color Bands:
45 – Light Gold Metallic
20 – Charcoal Metallic
55 – Black
94 – Blue Metallic
59 – Dark Green
51 – Dark Red
21 – Tomato Red
50 – White
700 – Aztec Silver
Configuration
Option/
Accessory
1200 OMEGALUX FLOODLIGHTS
COMPACT FLUORESCENT LAMPING
8.5” - 24” LONG MODELS
H - SIGNAGE
Features
TYPE:
Project:
Specification Grade, Compact, Vandal resistant. Unbreakable 180 degree Swivel. Unique “Slide seal “ closure.
4.4”
3.75”
L.
1/2” NPT Threaded KO
OPTICAL PERFORMANCE:
Linear floodlighting, providing 90 degree cutoff when used in the downward position to meet “Dark Sky” requirements. Narrow to very broad
sideways distribution according to lamp and fixture lengths. Adjustable
aiming is easily set with the toothed swivels.
CONSTRUCTION:
Extruded Aluminum body, and cast endcaps, with slide-in Lens design. A
bull- nose edge protects the gasket and polycarbonate lens from deformation. Unbreakable, wire-thru, cast swivel/s are permanently attached by four
internal S/S screws. Swivels are toothed and rotate 180 degrees.
1/2” NPT KOs on the endcaps allow other connection or wire through connections.
Expansion space at each endcap prevents airflow across the lens and reflector, eliminating dirt migration for a permanently clean lens interior, and maximum maintained light output. All hardware is Stainless steel.
LAMPS:
All Fluorescent lamps from 7 Watt compact to the most advanced linear
T5, and triple tube styles upto 42W.
MOUNTING:
1/2” NPT removable Nipple on the swivels allows simple, and unlimited
connection methods, for J boxes, - Permapost inground, - Extension arms,
- Custom mounting plates.
REFLECTORS:
High performance engineered designs match lamp characteristics, providing
high performances for flood or wallwash distribution, from a narrow lens
aperture. IES. Photometric files available. Special reflectors developed on
request
COMPACT FLUORESCENT
BASE MODEL NO: WATTS LGTH Swivel Ctrs
Magnetic Ballast
12-113BX
Electronic Ballasts
12-113BE
12-126QE
12-132TR
12-132TR
12-142TT
12-136BX
12-155BX
12-255BX
12-255BX
Reflector
ELECTRICAL:
Specify voltage, 120, 277V. or 347V Internal, Auto sensing or dedicated
prewired ballasts supplied, according to lamp type, with 15” leads exiting
one swivel.
Optional Dimming ballasts add - (Dim). Emergency battery pack - add (E).
Start Temp
13W
10 1/2"
CENTER
Flood or WW
13W
26W
32W
32W
42W
36W
55W
2 x 55W
2 x 55W
8 1/2"
10 1/2"
8 1/2"
8 1/2"
10 1/2"
18 3/4"
25 3/4"
49 3/4"
97 3/4"
CENTER
CENTER
CENTER
CENTER
CENTER
CENTER
16"
32"
64"
Flood or WW -5 - F
Flood or WW -5 - F
Flood only
-20 - F
-20 - F
Flood only
-20 - F
Flood only
Flood or WW -5 - F
Flood or WW -5 - F
Flood or WW -5 - F
Flood or WW -5 - F
UL Listed for sprinkler locations, and mounting within 4ft of the ground .
0-F
FINISH:
Polyester powder coat applied over a 5 stage pretreatment.
5 Standard colors - Quick-ship colors are Bronze, Black, Green or Silver.
Custom colors- optional at added cost.
OPTIONS - Internal Cell Louver, Hexcel or Blade Louver.
External Blade louvers,
Straight and Angled Cantilever Arms.
Colored Filter lenses
Flat Mounting feet and Special brackets.
Emergency and Dimming ballasts.
Barn Doors
12V/DC
- 9W, 13W - Electronic Ballasts- 2 Pin Lamps - Replace 60W, 75W incandescent
Flood or WW -5 - F
CENTER
9W. GX23-2 8 1/2"
12-9DC
CENTER
13W. GX23-2 8 1/2"
12-13DC
Flood or WW -5 - F
WEIGHT: Consult list.
Ordering Guide
Base#
12-
Mounting
SELECT
FROM
CHART
or
Create
custom
Color
-
Volts
-
S- Swivel Z-Bronze
A = 120V
C-Custom B-Black
B = 277V
G-Mist Green C= 347V
M-Metallic
W-White
C-Custom
Reflector
-
Mtg Pos.
F- Flood
W-Wallwash
Options
U-Up
D-Down
P-Perma Post Stake
XEL- Int Cell Lvr
IL -Int Blade Lvr
XBL-Ext Blade Lvr
GS -Glare Shield
MA4 -4” Mtg Arm
MA10 -10” Mtg Arm
MA36 -36” Mtg Arm
FF -Flat Feet Mounts
CL-Colored Lens
Specifications are correct at the time of publishing, but may be modified or improved in
accordance with current electrical, safety or manufacturing methods without notification.
Orgatech Omegalux
6/03
511 N. Virginia Ave; Azusa, Ca. 91702. 626.969.6820 / fax 626.969.6830
www.orgatechomegalux.com
TYPE:
LINEAR FLUORESCENT LAMPING
2Ft - 16 Ft Long Fixtures
Project:
Features
Specification Grade, Compact, Vandal resistant. Unique “Slide seal “ closure.
CUSTOM LENGTHS
CONSTRUCTION:
Extruded Aluminum body, and cast endcaps, with slide-in Lens design. A
bull- nose edge protects the gasket and polycarbonate lens from deformation. Unbreakable, wire-thru, cast swivel/s are permanently attached by four
internal S/S screws. Swivels are toothed and rotate 180 degrees.
1/2” NPT KOs on the endcaps allow other connection or wire through connections.
Expansion space at each endcap prevents airflow across the lens and reflector, eliminating dirt migration for a permanently clean lens interior, and maximum maintained light output. All hardware is Stainless steel.
OPTICAL PERFORMANCE:
Linear floodlighting, providing 90 degree cutoff when used in the downward position to meet “Dark Sky” requirements. Narrow to very broad
sideways distribution according to lamp and fixture lengths. Adjustable
aiming is easily set with the toothed swivels.
LAMPS:
All linear, and long compact fluorescent lamps.
MOUNTING:
1/2” NPT removable Nipple on the swivels allows simple, and unlimited
connection methods, for J boxes, - Permapost inground, - Extension arms,
- Custom mounting plates.
REFLECTORS:
High performance engineered designs match lamp characteristics, providing
high performances for flood or wallwash distribution, from a narrow lens
aperture. IES. Photometric files available. Special reflectors developed on
request
LINEAR FLUORESCENT
BASE MODEL NO:
WATTS LGTH Swivel Ctrs
Reflector
ELECTRICAL:
Specify voltage, 120, 277V. or 347V Internal, Auto sensing or dedicated
prewired ballasts supplied, according to lamp type, with 15” leads exiting
one swivel.
Optional Dimming ballasts add - (Dim). Emergency battery pack - add (E).
Start Temp
12-114T5
12-121T5
12-128T5
12-228T5
12-124T5HO
12-139T5HO
12-154T5HO
12-254T5HO
12-117T8
12-125T8
12-132T8
12-140T8
12-232T8
12-432T8
12-144T8HO
12-186T8HO
14W
21W
28W
2 x 28W
24W
39W
54W
2 x 54W
17W
25W
32W
40W
2 x 32W
4 x 32W
44W
86W
25 3/4"
37 3/4"
49 3/4"
97 3/4"
25 3/4"
37 3/4"
49 3/4"
97 3/4"
25 3/4"
37 3/4"
49 3/4"
61 3/4"
97 3/4"
193 3/4"
49 3/4"
97 3/4"
16"
24"
32"
64"
16"
24"
32"
64"
16"
24"
32"
48"
64"
120"
32"
64"
Flood or WW -5 - F
Flood or WW
-5 - F
Flood or WW
-5 - F
-5 - F
Flood or WW
Flood or WW -5 - F
Flood or WW -5 - F
Flood or WW
-5 - F
-5 - F
Flood or WW
Flood or WW
-5 - F
Flood or WW
-5 - F
Flood or WW
-5 - F
Flood or WW
-5 - F
-5 - F
Flood or WW
Flood or WW
-5 - F
Flood or WW -20 - F
Flood or WW -20 - F
12-455BX
4x 55W
97.3/4”
64”
Flood or WW -15 -F
UL Listed for sprinkler locations, and mounting within 4ft of the ground .
FINISH:
Polyester powder coat applied over a 5 stage pretreatment.
5 Standard colors - Quick-ship colors are Bronze, Black, Green or Silver.
Custom colors- optional at added cost.
OPTIONS - Internal Cell Louver, Hexcel or Blade Louver.
External Blade louvers,
Straight and Angled Cantilever Arms.
Colored Filter lenses
Flat Mounting feet and Special brackets.
Emergency and Dimming ballasts.
Barn Doors
WEIGHT: Consult list.
Ordering Guide
Base#
12-
Mounting
SELECT
FROM
CHART
or
Create
custom
Color
-
-
S- Swivel Z-Bronze
A = 120V
C-Custom B-Black
B = 277V
G-Mist Green C= 347V
M-Metallic
W-White
C-Custom
Orgatech Omegalux
6/03
Volts
Reflector
-
Mtg Pos.
F- Flood
W-Wallwash
Options
U-Up
D-Down
P-Perma Post Stake
XEL- Int Cell Lvr
IL -Int Blade Lvr
XBL-Ext Blade Lvr
GS -Glare Shield
MA4 -4” Mtg Arm
MA10 -10” Mtg Arm
MA36 -36” Mtg Arm
FF -Flat Feet Mounts
CL-Colored Lens
Specifications are correct at
the time of publishing, but
may be modified or improved
in accordance with current
electrical, safety or manufacturing methods without notification.
ACCESSORIES and OPTIONS
INSTALLATION ACCESSORIES
LOUVERS
GLARE SHIELD
(.060 DIE FORMED
ALUMINUM)
SIDE VIEW
EXTERNAL LOUVERS
(.060 ALUMINUM FRAME)
SIDE VIEW
INTERNAL EGG CRATE
LOUVERS
INTERNAL 3/8" BLADE
LOUVERS
HORIZONTAL MOUNTING
CUSTOM BRACKETS
Permaposts provide easy above-grade installation
Flat Hinged Mounting Foot - For mounting to
ledges or windowsills, enabling relamping access
from inside the building.
Typical installation for long fixtures
Orgatech Omegalux
6/03

Lighting - Waldo Point Harbor

Transcription

Similar documents

channel - Anvil International

11-MPC Series

LIGHTING TRENDS

KAD LED - Boston Light Source

Sumix™ Disc 3 SMT 08551 Mini Spot 26510 Ball D`Lyte