Stadtlander Woodcarvings

Transcription

S TAD T L AND E R WOOD C ARV I NGS
WO O DC A RV I N G S U P PL I E S
2 0 1 6 C a t a l o g , Vo l . 1 3 B
KNIVES
GOUGES
POWER CARVING
WOODBURNING
WOOD BLANKS
BASSWOOD PLATES
BASSWOOD BOXES
Santa on Seahorse
Seahorse carved by fellow carver
Ray Thurston
ROUGHOUTS
BOOKS
AND A WHOLE LOT MORE !!!!
2951 Frost Road
Mantua, OH 44255
Phone: (330) 931-7847
E-mail: bobstadtlander@roadrunner.com
Visit our website and order on-line at www.stadtlandercarvings.com
$1.00
S T A D T L AN DE R W O O DC A R V IN G S
w w w . st a dt l an d er c a r vi n g s . c o m
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
HELLO FELLOW WOODCARVERS:
We hope you enjoy perusing this volume of our catalog. All products are those that I use myself or recommend to woodcarving friends. Please visit our website at www. stadtlandercarvings.com to order from our
secure on-line internet store. Our store also contains additional information on many of our products.
Thanks to all who have supported us over the years.
Happy carving! Robert Stadtlander
VISIT OUR WEBSITE AT WWW.STADTLANDERCARVINGS.COM!
TABLE OF CONTENTS
NEW ITEMS…………………………………………….1A, 1B
KNIVES AND GOUGES
MURPHY…………….………………………………...1B
OAR POCKET KNIVES AND SUPPLIES……………..1-2
JOHN DUNKLE KNIVES AND SUPPLIES……………2-3
OZARK COUNTY CARVING (OCC) TOOLS……...4-5
DOCKYARD MICROGOUGES………………………6
CUTSINGER…………………………………………..6
HENRY TAYLOR …………………………………….7
MALLET TOOLS……………………………………...8
SOLINGEN……………………………………………8
UJ RAMELSON……………………………………….9
WOODCARVING KITS AND SETS.…………..…….10-11
FLEXCUT TOOLS …………………………………..11-13
WARREN CUTLERY…………………………………14
EXCEL HOBBY KNIVES……………………..……….14
TOOL CARRIERS……………………………………….15
TOOL HOLDERS……………....………………………..16-17
SAFETY WEAR…………………………………………17
SHARPENING………………………………………….18-19
HAND SANDING, SHAPING, ABRASIVES...…………19-21
POWERCARVING
FOREDOM POWER CARVING EQUIPMENT….…….22-24
POWER CARVING ACCESSORIES …...………………24
FOREDOM TYPHOON BURS……….………………...25
KUTZALL BURRS………………………………………26
RUBY CARVERS………………………………………...26
SAPPHIRE CARVERS………………………………….. 27
DIAMOND CARVERS……………….…………………27
FOREDOM CERAMCUT BLUE STONES……………...28
WHITE AND GREEN ABRASIVE STONES…...………29
POWER SANDING…………………………...………..29-31
STEEL BURS……..…………………………...…………30
MANDRELS…………………………………….……….31
WOODBURNING EQUIPMENT………….……… .32-34
GLASS BIRD AND FISH EYES……………………………35
CAST METAL BIRD FEET……………………...…………36
GLUES/ADHESIVES/FILLERS…………………...…………37
MISCELLANEOUS SUPPLIES…………………..…………37
MEASURING DEVICES………………………..………….38
WORKHOLDING DEVICES………….………………… .38
OUR FAVORITE BOOKS, DVD’s AND STUDY AIDS……53
ORDER FORMS
Prices effective 2-1-2016 and are subject to
change without notice
WOOD ITEMS
BASSWOOD BOARDS, BLOCKS, AND OVALS…...39
BASSWOOD BOXES………………………......……..40
BASSWOOD PLATES……………………….……..41-43
CLOCK MECHANISMS………………………….…...41
BASSWOOD AND BUTTERNUT EGGS……….........43
PROJECT ITEMS………………………………...….44-45
SPOON BLANKS…………………….………….…...46
BASSWOOD ROUGHOUTS……………………..47-52
To order items from the catalog, simply fill out the order
form at the back. Once completed, call, mail, or email it
to us.
• If emailing, you can scan it and email to
bobstadtlander@roadrunner.com.
• If phoning in your order, call (330) 931-7847.
• If mailing, mail to:
Stadtlander Woodcarvings,
2951 Frost Road, Mantua, OH 44255.
We now offer Gift Certificates!
Contact us for details.
Please call for an appointment, (330) 931-7847
or email me at
bobstadtlander@roadrunner.com
We accept these major credit cards
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
NE W IT E MS
2 -1 -2 0 1 6
Shown on pages 1A and 1B are just a few of our new items.
Flexcut Dual Sided Paddle Strop
See Page 18
Flexcut Micro Tools
Individuals and Sets
See Page 12
Flexcut Rebates Extended!
Until 7/31/2017, get $5 Cash Back from Flexcut
on every $50 purchase.
LEAH GODDARD ROUGHOUTS
EIGHT NEW PROJECTS!!!
See Page 52
KUTZALL HAND RASPS
Page 20
RAMELSON MICROTOOLS
See Page 9
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 1A
NEW BOOKS, PERIODICALS, CD’s and DVD’s
Books, Magazines, CD’s, and DVD’s listed here are new listings. We now carry over 500 titles, including children’s
coloring books which are an excellent source for ideas and sketches. Refer to our on-line internet store for a
complete listing or inquire about our Book Catalog Supplement.
PERIODICALS
Woodcarving Illustrated Issue 74 – Winter / Spring 2016
Woodcarving Illustrated Issue 73 – Holiday 2015
Scrollsaw Woodworking Issue 61—Holiday 2015
ANIMALS
Carving Deer
Carving Bears
CHIP CARVING
Chip Carved Christmas Ornaments
CARICATURE
Concepts to Caricatures: Celebrating 25 Years of Caricature
Carving
Carving Flat Plane Style Caricatures
PATTERNS
Great Book of Carving Patterns
RELIEF
Deep Relief Wood Carving
WOODBURNING
Big Book of Pyrography Projects
MISCELLANEOUS
WCI
WCI
WCI
ITEM #
WCI74
WCI73
SSW61
PRICE
$7.99
$7.99
$7.99
Hajny
Hajny
9781565238206 $12.99
9781565238510 $12.99
Nicholas
9781565238817 $11.99
CCA
9780764349775 $24.99
Refsal
9781565238589 $14.99
Irish
9781565238688 $24.99
Walker
9780764348211 $19.99
WCI
9781565238886 $19.99
Scandinavian Figure Carvings
Refsal
9781565238756 $16.99
Classic Whittling Basic Techniques and Old-Time Projects
Weibe
9781610352543 $14.95
Whittling Volume 4 (2015 Issue)
Making Leather Knife Sheaths- Vol. 2
WCI
Holter
SIPWH4
$9.99
9780764349348 $24.99
MURPHY BENCH KNIVES
Great for beginners, 5” long wood handle.
Factory Edge
1-1/2” long blade Item Number 101
Price: $13.00 each
Sharpened
Price: $15.50 each
1-1/2”
Detail Knife – Sharpened
Specially ground for carving fine details
such as eyes.
Price: $17.00 each
1-1/2”
1-7/8”
1-7/8”
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 1B
OAR CARVER FOLDING POCKET KNIVES AND SUPPLIES
These knives were designed by Ross Oar and are manufactured in the USA by Queen Cutlery.
Oar Carving Knives supplied by Stadtlander Woodcarvings are available with either a Factory Edge or an Extra Sharp edge. The
factory does their best to provide a sharp edge but inevitably this is a mass production effort. It is recommended that knives purchased in the Factory Edge condition are sharpened prior to using. Knives purchased in the Extra Sharp condition have been presharpened by an experienced woodcarver and are ready to use for woodcarving.
OAR CARVER POCKET KNIFE,
VERSION II
OUR MOST POPULAR!
American Walnut
OAR CARVER POCKET KNIFE,
VERSION I
The same great quality as Version II, but with
two 1 3/4" carving blades. Handle size is
3 5/8".
A folding pocket knife with one 1 3/4"
blade and one 1 3/16" blade. Handle
size is 3 5/8". Custom made for woodcarving with high carbon D2 Steel.
Choice of handles.
American Walnut
Aged Honey Amber Stag Bone
HANDLE MATERIAL
ITEM
PRICEFact.
Edge
ITEM
PRICEExtra
Sharp
American Walnut (Standard)
American Walnut (Standard)
Aged Honey Amber Stag Bone (Standard)
749
747
735
$95.00
$95.00
$95.00
750
748
736
$100.00
$100.00
$100.00
DESCRIPTION
Version I
Version II
Version II
OAR CARVER POCKET KNIFE, LOCKING SINGLE BLADE
A folding pocket knife with a single blade which locks in place while open. The D2 high carbon
chromium tool steel has excellent edge-holding properties. Blade size is 1 9/16", handle size is 3
3/4". Choice of handles. Please note that we may not have specials on-hand at all times.
Crown Red handles are made of Delrin.
SHEATHS FOR OAR
POCKET KNIFE
Fits Single Locking, Version
I and Version II knives, as
well as any pocket knife up
to 7/8” wide x 3 3/4” long.
Light Duty
Item 1028 …. $5.00
SPECIALS:
Available Handle Types:
Crown Red
(Standard)
American Walnut
Heavy Duty
Item 1022 ….$8.50
Abalone
DESCRIPTION
HANDLE MATERIAL
ITEM
PRICEFact. Edge
ITEM
PRICEExtra
Sharp
$65.00
$100.00
744
752
$67.50
$102.50
Locking Single Blade
Crown Red (Standard)
American Walnut
743
751
725
$100.00
726
$102.50
Chip Carver, Small Locking Blade
Chip Carving, Large Locking Blade
Chip Carving, Small Locking Blade
Chip Carving, Large Locking Blade
Abalone
731
719
739
737
741
$110.00
$75.00
$75.00
$75.00
$75.00
732
720
740
738
742
$112.50
$77.50
$77.50
$77.50
$77.50
Zebra Wood
Zebra Wood
CHIP CARVER POCKET KNIFE, SINGLE LOCKING BLADE
We've redesigned our pocket chip carving knives by
incorporating a teardrop handle to fit better in your
hand and now offer a smaller blade option for more
maneuverability.
Small Blade
Zebra Wood
Large Blade
Stag Bone
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 1
OAR KNIVES AND SUPPLIES
SHEATH FOR OAR FIXED BLADE
KNIFE
Protect your carving knife blades. Fits blades
up to 1 1/2" long and 5/8" wide with stitched
and riveted heavy cow
hide leather.
OAR CARVER, FIXED BLADE
A fixed blade carving knife with high carbon D2 steel (excellent edge
holding properties.) 5 3/4" overall length with 1 3/8" blade. Same great
quality as the Oar Carver Pocketknife. Designed to be comfortable for
most hand sizes. Factory Edge, Item 711 …. $26.50
Extra Sharp, Item 712…… $29.00
Item 1023 …. $4.50
WOODCARVER’S BELT BUCKLE
2 1/2" x 3" in Pewter. Designed by Ross Oar and
made in the USA.
OAR'S WOODCARVING
TOOL SHARPENER
A dream for both woodcarving tools and wood lathe
tools. Sharpens all sizes and
shapes of gouges, V tools, and
chisels using stone or power
stone and leather.
Item 1024 …. $31.00
Item 1014 ……. $16.00
BELT for Belt Buckle.
Specify Size and Color.
Sizes 34", 36", 38", 40" (Light Brown, Dark
Brown, or Black) Item 1061 ... $8.00
Size 39-42" (Light Brown or Black)
Item 1132…….$10.00
Queen Large Stockman,
3 Blades
Queen Teardrop,
Single Locking Blade
HANDLE MATERIAL
QUEEN CUTLERY, STANDARD KNIVES
Queen Teardrop, Single Locking Blade, 3.75" Closed
Queen Large Stockman, 3 Blades, 4" Closed
Queen Premium Trapper, 2 Blades, 4-1/8" Closed
SIZE
Dunkle Palm Gouges
All Straight, unless otherwise noted
Price ……. $30.00 each
349
351
352
356
357
359
363
Since these are custom made, handles and
blades will vary. Sharpened. Please contact
us if you have a preference for a particular handle color, otherwise a random color will be
shipped.
5/8" #1 Chisel
1/2" #2 Skew
1" #2
5/8" #3
1" #3
1/2" #5
5/8" #5 Bent
1" #5
5/8" #7
3/4" #7
1/2" #9
5/8" #9
3/4" #9
1/4" #11
3/16" Thumbnail
1/4" Thumbnail
3/8" Soft V
3/16" Soft V
Queen Premium Trapper
2 Blades
ITEM
PRICEFact.
Edge
ITEM
PRICEExtra
Sharp
721
723
745
$70.00
$70.00
$86.00
722
724
746
$72.50
$77.50
$90.00
ITEM
349
350
351
352
353
354
355
356
357
358
359
360
361
367
370
371
362
363
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 2
JOHN DUNKLE KNIVES
Comfortable handle and custom made. Crooked knives and bent skews are great for getting in awkward spots for relief carving.
Since these are custom made, handles and blades will vary in size. Sharpened. Please contact us if you have a preference for a
particular handle color, otherwise a random color will be shipped.
COMMON HANDLE TYPES AND COLORS
STYLE
5ST Bench Knife
7ST Bench Knife
7ST Bench Knife– Long Blade
9ST Bench Knife
9ST Bench Knife– Extra Long Blade
10ST Bench Knife
5HP High Point Bench Knife
9HP Bent (Mertz)
9HP Bent (Howard, less bent)
STD Chip Carving (standard)
7 SM Chip Carving (small)
#366 9HP BENT
SM HP Chip (small high point)
9HP Chip (standard high point)
SM Hook Chip
#373 9HP BENT STD Hook Chip
5CTR Crooked
5CTL Crooked
6CTR Crooked
HOOK CHIP
6CTL Crooked
7CTR Crooked
7CTL Crooked
ANTLER
5ST Bench
7ST Bench
9ST Bench
10ST Bench
ACRYLIC ACETATE
5ST Bench
7ST Bench
9ST Bench
7SM Chip
7HP
SKEWS AND DOGLEGS
Large Flat Skew (Regular Handle)
PENCIL HANDLE
Small Flat Skew (Pencil)
Small Flat Straight CTS (Pencil)
Small Bent Skew CTR (Pencil)
Small Bent Skew CTL (Pencil)
BENT - SIDE VIEW
Small Bent Straight CTS (Pencil)
See Page 18
Dogleg (Pencil)
for Dunkle
sharpening
Items
308
309, 311
SIZE
5/32" x 3/4"
7/32" x 1-3/16" to 1-1/2"
7/32" x 1-3/4"
9/32" x 1-1/2"
9/32" x 1-3/4"
9/32" x 2"
10/32" x 1-3/4"
10/32" x 2"
5/32" x 3/4"
7/32" x 1-3/16"
9/32" x 1-1/2"
9/32" x 1-1/2"
9/32" x 1-1/2"
9/32" x 1"
7/32" x 3/4"
7/32" x 3/4"
9/32" x 1"
7/32" x 3/4"
9/32" x 3/4"
5/32" x 3/4" cuts right
5/32" x 3/4" cuts left
6/32" x 1" cuts right
6/32" x 1" cuts left
7/32" x 1-1/8" cuts right
7/32" x 1-1/8" cuts left
ITEM #
326
314
323
315
324
327
328
325
319
331
332
366
373
301
302
303
316
329
369
304
305
306
307
317
318
PRICE
$32.50
$32.50
$32.50
$32.50
$32.50
$32.50
$36.50
$36.50
$32.50
$32.50
$32.50
$36.50
$36.50
$32.50
$32.50
$32.50
$32.50
$34.50
$34.50
$35.00
$35.00
$35.00
$35.00
$35.00
$35.00
5/32" x 3/4"
7/32" x 1-3/16" to 1-1/2"
9/32" x 1-1/2"
10/32" x 1-3/4"
340
342
343
344
$60.00
$60.00
$65.00
$65.00
5/32" x 3/4"
7/32" x 1-3/16" to 1-1/2"
9/32" x 1-1/2"
7/32" x 3/4"
7/32" x 1-3/16"
345
347
348
364
365
$50.00
$50.00
$50.00
$50.00
$50.00
1/2" edge-cuts right or left
1/4" edge-cuts right or left
1/4" edge-cuts straight
1/4" edge-cuts right
1/4" edge-cuts left
308
309
310
311
312
313
330
$32.50
$25.00
$25.00
$27.00
$27.00
$27.00
$28.00
310, 313
312
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
330
Page 3
OZARK COUNTY CARVING TOOLS (OCC)
The original Denny Knife.... Denny has retired and the great quality, selection and service is continuing. Refer to our internet store
for more information including images for each item. Sharpened. If you do not see the style you want, please inquire.
40001
KNIVES
1 1/4"
1/2"
1/2"
1/2"
1/2"
3/4"
3/4"
1"
1"
1 1/2"
1 1/2"
1 1/2"
1 3/4"
1 7/8"
2 1/4"
2"
2"
2-1/4"
2-1/4"
1"
3/4"
3/4"
1 3/8"
1 3/4"
2"
2 1/4"
5/8"
7/8"
3/16"
HANDLE
Scout
Small Hands
Large Hands
Small Hands
Large Hands
Small Hands
Large Hands
Small Hands
Large Hands
Small Hands
Large Hands
Standard
4 1/2" Grip
Standard
Walnut
Walnut
Standard
Standard
Standard
Standard
Standard
Standard
Small Hands
Large Hands
5"
5"
5"
5"
6"
6"
5"
3 1/2"
7"
DESCRIPTION
Knife, good for beginners
Mini detail knife
Mini detail knife
Angled mini detail knife
Angled mini detail knife
Mini detail knife
Mini detail knife
Mini detail knife
Mini detail knife
Straight knife
Straight knife
Straight knife
Straight knife
Straight knife
Shipley Bench Knife
Shipley Roll Knife (Narrow)
Straight knife
Straight knife, wide blade
Blade 1/2" width
Eye detail knife, 1/4" skew
Curved skew, 4" Long
Chip carving knife
Mini chip carving
Mini chip carving
Upsweep
Upsweep
Upsweep
Upsweep
Woodwacker
Woodwacker
Mini Skew Knife
Hooked Skew
Hooked Skew
BLADES ONLY
3/4"
1"
1 1/2"
1 1/2" Narrow
1 7/8"
2"
2 1/4" Wide
2 1/4", 1/2" Wide
Eye Detail
Chip, 1"
Scout, 1-1/4"
Hooked Skew
Item
40133
40016
40017
40018
40019
40021
40022
40023
40152
40153
40155
40156
Price
$12.00
$12.00
$13.00
$13.00
$13.00
$13.00
$13.00
$13.00
$13.00
$12.00
$12.00
$13.00
40130
40131
ITEM PRICE
Typical Small Hands Handle Typical Large Hands Handle
40001 $20.50
40011
40130 $19.50
40131 $21.00
40024 $19.50
Chip
40002
40129 $21.00
40005 $19.50
Standard Handles
40128 $20.50
40006 $19.50
40132 $21.00
40024
Angled
40007 $20.50
NEW!
40008 $20.50
40009 $21.50
40149
40008
40149 $22.00
40010 $21.50
40135 $24.50
Walnut Handle
40136 $24.50
40011 $21.50
40135
40012 $22.50
40013 $21.50
40136
40014
40014 $21.50
40015 $24.50
40002 $21.50
40015
40003 $19.50
40106
Upsweep,
5”
Handle
40004 $20.50
40108 $24.50
40107 $24.50
40106 $24.50 40109 Woodwacker, 6” Handle
40105 $24.50
40146
40110 $25.50
40145
40109 $25.50
40145 $18.00
NEW!
40146 $20.00
40157
40157 $22.50
Sweep
SIDEWINDERS and
Handle
Item Price
BOWL, CUP, SPOON
TOOLS
3/4" 5
4 1/2" Sidewinder
40073 $22.50
3/4" 5
4 1/2" Sidewinder
40074 $22.50
3/4" 7
4 1/2" Sidewinder, RH
40081 $22.50
3/4" 7
4 1/2" Sidewinder, LH
40082 $22.50
Sidewinder, Deep Bend, RH
1"
7
5"
40141 $22.00
Sidewinder, Deep Bend, LH
1"
7
5"
40142 $22.00
Hook Knife #1, RH
5"
40139 $24.50
Hook Knife #1, LH
5"
40140 $24.50
Gouge, Bent Spoon
7
5"
40143 $23.50
Sidewinder
Deep Bend
Sidewinders
BENT SPOON
NEW!
HOOK KNIVES
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 4
OZARK COUNTY CARVING TOOLS (OCC)
The original Denny Knife.... Denny has retired and the great quality, selection and service is continuing. Refer to our internet store
for more information including images for each item. Sharpened. If you do not see the style you want, please inquire.
GOUGES
Sweep
1/8"
1/8"
1/4"
1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
3/4"
3/4"
1/4"
1/4"
3/8"
3/8"
3/8"
1/2"
1/2"
3/4"
3/4"
1/4"
1/4"
1/2"
1/2"
3/8"
3/4"
5/8"
5/8"
3/8"
1/2"
1/2"
3/4"
4 mm
6 mm
5/16"
5/8"
5/8"
3/16"
3/16"
1/4"
3/8"
5/8"
3/8"
1/4"
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
5
5
5
5
5
5
5
5
5
7
7
7
7
7
7
8
8
9
9
9
9
11
11
V
V
V
V
V
V
V
V
V
V
HANDLE
DESCRIPTION
3"
Straight
4 1/2" Bent
3"
Straight
4 1/2" Bent
4 1/2" Skew Bent Rt
4 1/2" Skew Bent Lt
3"
Straight
4 1/2" Bent
4 1/2" Skew Bent Rt
4 1/2" Skew Bent Lt
4-1/2" Dogleg
4 1/2" Reverse Bent
3"
Straight
3"
Bent
4 1/2" Bent
4 1/2" Skew Bent Rt
4 1/2" Skew Bent Lt
4 1/2" Dogleg
3"
Bent
4 1/2" Bent
3"
Straight
4 1/2" Bent
3"
Straight
3"
Bent
4 1/2" Bent
3"
Straight
4 1/2" Bent
4 1/2" Straight
4 1/2" Bent
3"
Straight
4 1/2" Bent
3"
Straight
4 1/2" Bent
3"
Straight
4 1/2" Bent
4 1/2" Straight
4 1/2" Spoon
3"
Straight
3"
Straight
4 1/2" Bent
4 1/2" Straight
3"
Straight
3"
Straight
3"
V-gouge
3"
Stetson V, 2” long blade
3"
Ortel V, 3" long blade
3"
Bishop mini v-gouge
3"
Mini V, Pencil Handle
3 1/2" Tight V-Gouge, 60 deg
3 1/2" Soft V-gouge, 60 deg
3"
Soft V, Eye Tool
3 1/2" V Gouge, 32 deg
3 1/2" V Gouge, 32 deg
ITEM
40051
40052
40053
40054
40055
40056
40057
40058
40059
40060
41058
40134
40061
40151
40062
40063
40064
40154
40137
40065
40066
40067
40068
40150
40069
40070
40071
40138
40072
40075
40076
40077
40078
40079
40080
40083
40084
40085
40086
40087
40088
40089
40090
40091
40092
40093
40094
40144
40113
40096
40097
40148
40147
PRICE
$21.50
$22.50
$21.50
$22.50
$23.50
$23.50
$22.00
$23.50
$23.50
$23.50
$24.50
$23.50
$22.00
$23.50
$23.50
$23.50
$23.50
$24.50
$24.50
$24.50
$21.50
$22.50
$22.00
$21.00
$23.50
$22.00
$23.50
$24.50
$24.50
$21.50
$22.50
$22.00
$23.50
$22.00
$24.50
$24.50
$24.50
$22.00
$22.00
$23.50
$24.50
$22.50
$22.50
$22.50
$25.50
$25.50
$21.50
$16.00
$24.50
$22.50
$25.00
$24.50
$24.50
Dogleg, 4 1/2” Handle
40063 Skew Bent
SHORT CUT GOUGES
Straight have 2 3/4” long handles
Bent have 3 3/4” long handles
SIZE
Sweep
1-1/4"
7/16"
7/16"
7/16"
1/2"
3/8"
5/16"
7/16"
7/16"
7/16"
1/2"
3/8"
5/16"
Knife
3
5
7
9
11
V
3
5
7
9
11
V
DESCRIPTION
ITEM
PRICE
Straight
Straight
Straight
Straight
Straight
Straight
Straight
Bent
Bent
Bent
Bent
Bent
Bent
40115
40116
40117
40118
40119
40120
40121
40122
40123
40124
40125
40126
40127
$20.50
$22.00
$22.00
$22.00
$22.00
$22.50
$22.50
$23.50
$23.50
$23.50
$23.50
$24.50
$24.50
40118 Straight Short Cut
40125 Bent Short Cut
WOOD HOGS
Gouges have 4 1/2” long handles
V-Tools have 3 1/2” long handles
40102 Wood Hog
SIZE
SWEEP
1"
1"
1"
1"
1"
1"
1"
5/8", 3" lg
5/8", 2" lg
3
3
5
5
7
9
11
V
V
40092 Stetson
V-Tool
40144
Bent, 4 1/2” Handle
Straight, 3” Handle
Straight
Bent
Straight
Bent
Straight
Straight
Straight
Straight
Straight
40093 Ortel
V-Tool
ITEM
PRICE
40098
40099
40100
40101
40102
40103
40104
40111
40112
$24.50
$25.50
$24.50
$25.50
$24.50
$24.50
$24.50
$26.00
$26.00
40094 Bishop
Ear Tool
40097
Soft V
NEW!
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 5
DOCKYARD MICROGOUGES
Dockyard tools have a cherry wood hexagonal handle, about 5-½ inches in length overall, great for detail work
and all kinds of carving because of their small size and varied tool shapes. Plough tools are beveled on one side.
Paring tools are beveled on both sides. Sharpened.
INDIVIDUAL TOOLS
404 U-Gouge
423 Paring
414 V-Tool
454 Dogleg
421 Plough
442 Skew
SAVE WITH DOCKYARD SETS!
STANDARD GOUGE SETS: Each set contains a
Plough, Paring Tool, V-Tool, U-Gouge and Skew Chisel
5 pc Micro 1.5mm Set Item 491…... Price: $68.00
5 pc Micro 2 mm Set Item 499…... Price: $68.00
5 pc Micro 3 mm Set Item 498…... Price: $68.00
SPECIALTY SETS:
4 pc Dogleg Set Item 496….. Price: $65.75
4 pc V-Tool Set Item 497….. Price: $59.25
5 pc U– Gouge Set Item 492…..Price: $76.25
Create your Own Five Piece Set Specify any combination of five individual gouges to create your own personalized set
Item 493…..Price $74.00
DESCRIPTION
SIZE
U-Gouge
U-Gouge
U-Gouge
U-Gouge
U-Gouge
V-Tool
V-Tool
V-Tool
V-Tool
Plough Tool
Plough Tool
Plough Tool
Paring Tool
Paring Tool
Paring Tool
Skew Tool
Skew Tool
Skew Tool
Dogleg Tool
Dogleg Tool
Dogleg Tool
Dogleg Tool
1.5 mm
2 mm
3 mm
4 mm
5 mm
1.5 mm x 90 deg
2 mm x 90 deg
3 mm x 75 deg
3 mm x 90 deg
1.5 mm
2 mm
3 mm
1.5 mm
2 mm
3 mm
1.5 mm
2 mm
3 mm
2 mm
2.4 mm
2.75 mm
3.25 mm
ITEM
NUMBER
PRICE
401
402
403
404
405
411
412
413
414
421
422
423
431
433
432
441
443
442
451
452
453
454
$18.75
$18.75
$18.75
$18.75
$18.75
$18.75
$18.75
$18.75
$18.75
$18.75
$18.75
$18.75
$18.75
$18.75
$18.75
$18.75
$18.75
$18.75
$18.75
$18.75
$18.75
$18.75
Iron-On Labels for Canvas Toolholders
25 labels (1 for every dockyard plus the 3
knives) to locate your dockyards easily.
Item 495…… Price $2.00 (set of 25)
Dockyard Gouge and V-Tool Strop
Sharpen all your Dockyard Tools! Comes
with 3" x 5.5" wood strop, 2 oz. of
Dockyard Goop, applicator, carrying case
and directions. Overall size of case approx.
8.5" x 4.25" x 1" when closed.
Item 494….. Price $25.00
See how it works at
http://youtu.be/KkbHWSYwfEA !!
CUTSINGER TOOLS
Economical and suitable for all types of carving. All types have black walnut flat-sided handles, except as
noted. Veiners are very deep. Overall length is 5”. Cutsinger has gone out of business and we currently
have these styles remaining. Sharpened.
SIZE
5/16"
3/16"
3/32"
REF
(SWEEP)
2
7
11
ITEM #
DESCRIPTION
Straight Skew
Straight Gouge, Square Edge
Bent Veiner
4145
4405
4720
Price–
Sharpened
$16.00
$16.00
$16.00
4405 Top and Side Views
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 6
HENRY TAYLOR PALM GOUGES
One of the oldest and most respected chisel manufacturers, Henry Taylor offers gouges meeting most carving needs. Fitted with flat-sided, palm-shaped, self-sealed handle. Overall handle diameter 1-1/4". Gouges
are approximately 5" in overall length. We have found most Henry Taylor palm gouges are supplied in widths
slightly larger than specified. Curved (Bent) gouges suitable for most types of relief carving.
Comes sharpened or unsharpened . Unsharpened is $2.50 less.
If you do not see the style you want, please inquire.
SIZE
SWEEP
1/8" (3mm)
3/16" (5mm)
1/4" (6mm)
3/8" (10mm)
3/4" (20mm)
1" (26mm)
1" (25mm)
1/4" (6mm)
1/4" (6mm)
3/8" (10mm)
3/8" (10mm)
1/8" (3mm)
1/4" (6mm)
5/16" (8mm)
3/8" (10mm)
3/8" (10mm)
1/2" (13mm)
1/2" (13mm)
5/8" (16mm)
5/8" (16mm)
3/4" (20mm)
3/4" (20mm)
1" (26mm)
1" (26mm)
1/8" (3mm)
1/8" (3mm)
3/16" (5mm)
5/16" (8mm)
5/16" (8mm)
3/8" (10mm)
1/2" (13mm)
3/4" (20mm)
3/4" (20mm)
1/2" (13mm)
1/2" (13mm)
5/8" (16mm)
3/4" (20mm)
3/4" (20mm)
1/4" (6mm)
1/4" (6mm)
5/16" (8mm)
3/8" (10mm)
1/2" (13mm)
3/4" (20mm)
1/2" (13mm)
5/8" (16mm)
5/8" (16mm)
3/4" (20mm)
7/8" (22mm)
7/8" (22mm)
1/8" (3mm)
1/8" (3mm)
1/4" (6mm)
1/4" (6mm)
5/16" (8mm)
1
1
1
1
1
1
1
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
5
5
5
5
5
5
5
5
5
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
DESCRIPTION
Straight Chisel
Curved Chisel
Straight Chisel
Straight Chisel
Straight Chisel
Straight Chisel
Curved Chisel
Straight Skew
Curved Skew
Straight Skew
Curved Skew
Curved Gouge
Curved Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Curved Gouge
Straight Gouge
Straight Gouge
Straight Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Curved Gouge
ITEM
NUMBER
PRICE
301012
301018
301025
301038
301075
301099
301199
302025
302125
302038
302138
303112
303125
303131
303038
303138
303050
303150
303062
303162
303075
303175
303099
303199
305012
305112
305118
305031
305131
305038
305150
305075
305175
306050
306150
306162
306075
306175
307025
307125
307131
307038
307050
307075
307150
307062
307162
307175
307087
307187
308012
308112
308025
308125
308131
$22.00
$23.00
$23.50
$24.00
$27.00
$28.00
$29.50
$23.50
$24.50
$24.00
$25.00
$23.00
$24.50
$25.00
$24.00
$25.00
$24.00
$25.00
$24.50
$25.50
$26.50
$27.50
$28.50
$29.50
$22.00
$23.00
$23.00
$24.00
$25.00
$24.00
$25.00
$26.50
$27.50
$24.00
$25.00
$25.00
$26.50
$27.50
$23.50
$24.50
$25.00
$24.00
$24.00
$26.50
$25.00
$24.50
$25.00
$27.50
$27.00
$28.00
$22.00
$23.00
$23.50
$24.50
$25.00
SHARPENED
SIZE
SWEEP
1/8" (3mm)
1/8" (3mm)
3/16" (5mm)
3/16" (5mm)
1/4" (6mm)
5/16" (8mm)
3/8" (10mm)
1/2" (13mm)
1/2" (13mm)
5/8" (16mm)
5/8" (16mm)
3/4" (20mm)
3/4" (20mm)
1/32" (1mm)
1/32" (1mm)
1/16" (2mm)
1/16" (2mm)
1/8" (3mm)
1/8" (3mm)
3/16" (5mm)
3/16" (5mm)
1/4" (6mm)
1/4" (6mm)
5/16" (8mm)
3/8" (10mm)
3/8" (10mm)
1/2" (13mm)
1/16" (2 mm)
1/16" (2 mm)
1/8" (3mm)
3/16" (5mm)
1/4" (6mm)
5/16" (8mm)
3/8" (10mm)
1/16" (2 mm)
1/8" (3mm)
3/16" (5mm)
1/4" (6mm)
5/16" (8mm)
3/8" (10mm)
1/16" (2 mm)
1/8" (3mm)
5/16" (8mm)
3/8" (10mm)
9
9
9
9
9
9
9
9
9
9
9
9
9
11
11
11
11
11
11
11
11
11
11
11
11
11
11
45 Deg
45 Deg
45 Deg
45 Deg
45 Deg
45 Deg
45 Deg
60 Deg
60 Deg
60 Deg
60 Deg
60 Deg
60 Deg
90 Deg
90 Deg
90 Deg
90 Deg
DESCRIPTION
Straight Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Straight Gouge
Straight Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Curved Gouge
Straight Gouge
Curved Gouge
Straight Gouge
Straight V Tool
Curved V Tool
Curved V Tool
Curved V Tool
Curved V Tool
Curved V Tool
Curved V Tool
Curved V Tool
Curved V Tool
Curved V Tool
Curved V Tool
Curved V Tool
Curved V Tool
Curved V Tool
Curved V Tool
Curved V Tool
Straight V Tool
ITEM
NUMBER
PRICE
309012
309112
309018
309118
309025
309031
309138
309050
309150
309062
309162
309075
309175
311003
311103
311006
311106
311012
311112
311018
311118
311025
311125
311131
311038
311138
311050
345006
345106
345112
345118
345125
345131
345138
360106
360112
360118
360125
360131
360138
390106
390112
390131
390038
$22.00
$26.00
$22.00
$23.00
$23.50
$24.00
$25.00
$24.00
$25.00
$24.50
$25.00
$26.50
$27.50
$29.00
$30.00
$26.50
$27.50
$22.00
$22.50
$23.50
$24.50
$23.50
$24.50
$25.00
$24.00
$25.00
$24.00
$27.50
$28.50
$26.00
$26.00
$26.00
$26.00
$26.00
$28.50
$26.00
$26.00
$26.00
$26.00
$26.00
$28.50
$26.00
$26.00
$26.00
SHARPENED
STRAIGHT Side View
CURVED (Bent) Side View
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 7
MALLET TOOLS
HENRY TAYLOR PROFESSIONAL MALLET TOOLS– POPULAR SIZES
With Ash Handle and Albright Finish. Handle Lengths vary 6 to 6 1/2 inch length.
Comes sharpened or unsharpened. Unsharpened is $2.50 less. INQUIRE FOR SIZES/TYPES NOT LISTED HERE.
SIZE
SWEEP/ DESCRIPTION
7/8" (22 mm)
3
1/2" (13 mm)
4
3/4 (20 mm)
4
3/8" (10mm)
5
5/8" (16mm)
5
3/8" (10mm)
6
5/8" (16mm)
6
3/8" (10mm)
7
1" (25mm)
7
11/16" (18mm)
8
1/2" (13 mm)
10
1/2" (13 mm) 45 Deg
3/16" (5mm)
2
Straight Gouge
Straight Gouge
Straight Gouge
Straight Gouge
Straight Gouge
Straight Gouge
Straight Gouge
Straight Gouge
Straight Gouge
Spoon Gouge
Straight Gouge
Straight V Tool
Cogelow Skew
ITEM
NUMBER
SHARPENED
503088
504050
504075
505038
505062
506038
506062
507038
507100
518069
510050
545050
550018
$37.50
$36.50
$37.50
$36.50
$37.50
$37.50
$39.50
$39.00
$43.50
$40.50
$41.50
$46.50
$36.50
PRICE
Cogelow Skew
RAMELSON MALLET TOOLS– WITH 9" OCTAGON HANDLES
6" Long handle. Comes sharpened or unsharpened. Unsharpened is $2.50 less. Limited Supply!!! These are being discontinued.
SIZE SWEEP/ DESCRIPTION
3/8"
5/8"
3/8"
5/8"
3/16"
5
5
9
9
11
Bent Fishtail Gouge
Bent Fishtail Gouge
Bent Fishtail Gouge
Bent Fishtail Gouge
Bent Gouge
ITEM
NUMBER
SHARPENED
2910
2911
2919
2920
2930
$19.50
$25.00
$16.25
$25.00
$19.50
PRICE
2920
SOLINGEN (GERMANY) TOOLS
SIZE SWEEP STYLE
A line of knives and gouges suitable for all types of
carving. Gouges can be used for light mallet work.
Overall length of gouges are 8". Handles for gouges
are 3/4" diameter and octagon shaped. All types
have wood handles. Made with German Solingen
steel. Comes sharpened or unsharpened.
Unsharpened is $2.50 less.
See Page 16 for Solingen Tool Roll
51
52
53
58
6 mm
8 mm
10 mm
12 mm
2 mm
3 mm
6 mm
8 mm
10 mm
12 mm
3 mm
5 mm
7 mm
10 mm
6 mm
8 mm
8 mm
7
7
9
9
11
11
11
10
10
10
90 Deg
90 Deg
90 Deg
90 Deg
11
7
7
75
75
75
75
73
73
73
73
73
73
71
71
71
71
83
85
95
DESCRIPTION
Mini Chip Carving
Knife,1/2” long blade
Chip Carving Knife x 1”
long blade
Double Curved Knife, 11/2” long blade
Straight Bench Knife, 1 1/2” blade
Shallow Gouge, Straight
Deep Gouge, Straight
V Gouge, Straight
V Gouge, Straight
V Gouge, Straight
V Gouge, Straight
Deep Gouge, Bent
Long Spoon
Short Spoon
ITEM
PRICE
(SHARP)
37051
$13.50
37052
$13.50
37053
$17.50
37058
$15.50
37506
37508
37510
37512
37302
37304
37306
37308
37310
37312
37103
37105
37107
37110
38306
39508
39508
$21.50
$21.50
$21.50
$21.50
$24.50
$24.50
$21.50
$21.50
$21.50
$22.50
$27.50
$27.50
$27.50
$27.50
$25.50
$25.50
$25.50
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 8
UJ RAMELSON GOUGES
Gouges for all types of carving. American-made, hand-forged, heat treated, and tempered high carbon
tool steel. All types have flat-sided palm handles, overall handle diameter is 1-3/8". Overall length is
4-1/2" to 5".
NEW!
STRAIGHT - Side View
(No. 2510 shown)
BENT- Side View
(No. 2220 shown)
SHORT BENT - Side View
(No. 2520 shown)
Ramelson Microtools have an approximate
overall length of 5-1/4 inches. Handle is 4
inches long. Comes sharpened or unsharpened . Unsharpened is $2.50 less.
REGULAR -Top View
FISHTAIL – Top View
Comes sharpened or unsharpened . Unsharpened is $2.50
less. If you do not see the style you want, please inquire.
SIZE
SWEEP #
5/32"
5/32"
1/4"
5/16"
3/8"
1/4"
3/8"
1/4"
3/8"
1/2"
5/8"
3/4"
1/8"
1/8"
1/4"
3/8"
1/2"
5/8"
3/4"
1/4"
3/8"
1/2"
5/8"
9/64"
5/16"
1/4"
3/8"
1/2"
5/8"
1/32"
1/16"
1/16"
1/8"
3/16"
1/4"
1/16"
3/32"
1/8"
9/64"
3/16"
1/4"
5/16"
#1
#1
#1
#1
#1
#2
#2
#3
#3
#3
#3
#3
#5
#5
#5
#5
#5
#5
#5
#7
#7
#7
#7
#8
#8
#9
#9
#9
#9
#11
#11
#11
#11
#11
#11
45 DEG
45 DEG
60 DEG
60 DEG
60 DEG
60 DEG
60 DEG
ITEM
DESCRIPTION
STRAIGHT FISHTAIL
BENT FISHTAIL
STRAIGHT FISHTAIL
BENT FISHTAIL
STRAIGHT FISHTAIL
STRAIGHT FISHTAIL SKEW
STRAIGHT FISHTAIL SKEW
BENT FISHTAIL
BENT FISHTAIL
BENT FISHTAIL
BENT FISHTAIL
BENT FISHTAIL
STRAIGHT FISHTAIL
BENT FISHTAIL
BENT FISHTAIL
BENT FISHTAIL
BENT FISHTAIL
BENT FISHTAIL
BENT FISHTAIL
BENT FISHTAIL
BENT FISHTAIL
BENT FISHTAIL
BENT FISHTAIL
STRAIGHT REGULAR
SHORT BENT FISHTAIL
BENT FISHTAIL
BENT FISHTAIL
BENT FISHTAIL
BENT FISHTAIL
STRAIGHT VEINER
STRAIGHT (.093 across outside)
STRAIGHT (.125 across outside)
BENT VEINER
BENT VEINER
BENT VEINER
BENT PARTING TOOL
BENT PARTING TOOL
BENT PARTING TOOL
BENT PARTING TOOL
BENT PARTING TOOL
BENT PARTING TOOL
BENT PARTING TOOL
2111
2121
2125
2130
2140
2145
2150
2205
2210
2215
2220
2230
2305
2307
2315
2317
2320
2325
2330
2405
2407
2410
2415
2510
2520
2615
2620
2630
2635
2700
2705
2710
2720
2730
2740
2800
2810
2820
2830
2840
2850
2860
PRICE(SHARP)
$12.50
$12.50
$12.50
$12.50
$12.50
$12.50
$12.50
$17.50
$18.50
$20.50
$22.50
$27.50
$18.50
$18.50
$17.50
$18.50
$20.50
$22.50
$27.50
$18.50
$22.50
$24.50
$26.50
$14.50
$14.50
$18.50
$22.50
$24.50
$26.50
$16.50
$16.50
$14.50
$14.50
$22.50
$26.50
$16.50
$16.50
$14.50
$17.50
$22.50
$26.50
$30.50
SIZE
1.5 mm
2.0 mm
3.0 mm
4.0 mm
1.5 mm
2.0 mm
3.0 mm
1.5 mm
2.0 mm
3.0 mm
1.5 mm
2.0 mm
3.0 mm
1.5 mm
2.0 mm
3.0 mm
1.5 mm
2.0 mm
3.0 mm
1.5 mm
2.0 mm
3.0 mm
DESCRIPTION
Micro U
Micro U
Micro U
Micro U
Micro V
Micro V
Micro V
Micro Skew
Micro Skew
Micro Skew
Micro Str. Chisel
Micro Str. Chisel
Micro Str. Chisel
Micro Bent Chisel
Micro Bent Chisel
Micro Bent Chisel
5 pc set without pouch
5 pc set with pouch
5 pc set with pouch
5 pc set with pouch
ITEM
PRICE
(SHARP)
3021
3022
3023
3024
3025
3026
3027
3028
3029
3030
3031
3032
3033
3034
3035
3036
3037
3038
3039
3040
3041
3042
$16.50
$16.50
$16.50
$17.50
$16.50
$16.50
$16.50
$15.50
$15.50
$15.50
$15.50
$15.50
$15.50
$15.50
$15.50
$15.50
$57.50
$57.50
$57.50
$71.50
$71.50
$71.50
ROUND AND OVAL EYE HOLE PUNCHES
$12.00 each.
Mix or Match any four for $40.00
6 pc round set
Item 2013… $59.00
6 pc oval set
Item 2014….$59.00
Size
Item #
1/8" Round
2007
5/32" Round
2008
3/16" Round
2009
7/32" Round
2010
1/4" Round
2011
9/32" Round
2012
1/8" Oval
2001
5/32" Oval
2002
3/16" Oval
2003
7/32" Oval
2004
1/4" Oval
2005
9/32" Oval
2006
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 9
WOODCARVING KITS AND SETS
These sets were specially developed by Stadtlander Woodcarvings.
Save 10% from the cost of purchasing individually.
Beginner Chip Carving Set.
Ten basic items to start chip carving.
Item Number 808….. $80.00
Beginner Basic Carving Set.
Eight basic items needed to start carving.
Item Number 807….. $48.00
CONTAINS
Murphy Bench Knife, Sharp - your
choice of size
103 or 104
Sharpening Stone
1051
Cowhide Strop
1054
Strop Compound - your choice
CONTAINS
ITEM
Dunkle Knife - your choice
1051
Cowhide Strop
1054
1052
1052
Glove - your choice of size
1001
The Complete Guide to Chip
Carving book
Boot Blank with instructions
5402
Practice Board
1 x 1 x 6 Blank
5102
Your Choice of 6" Basswood
Plate or Medium Cross
SIZE
SWEEP
DESCRIPTION
ITEM
Sharpened
1/2"
1/2"
5/16"
1/8"
1/4"
9/64"
3
7
8
11
11
60 deg
Bent Fishtail
Bent Fishtail
Short Bent Fishtail
Bent Veiner
Bent Veiner
Bent V - Tool
5 x 7 x 1/2 Practice Board
1-1/2 x 1-1/2 x 12 Practice Blank
2215
2410
2520
2720
2740
2830
5010
5103
1057 , 1058, 1060
Honing Oil
Honing Oil
Ramelson Beginner Palm Gouge Set. Economical set of
six basic palm gouges for carving in the round or basic relief
carving. Includes two basswood practice blanks. We have
found these gouges to be indispensable no matter what type
of carving you are doing. (See Relief Carvings Sets if interested in relief carving only.) Available in Sharpened or Unsharpened (Factory Edge.)
Unsharpened: Item 809….$95.00
Sharpened: Item 810……..$109.00
301, 302, 303, 316
Sharpening Stone
Strop Compound - your choice
1057 , 1058, 1060
ITEM
19781402741289
5010
6001, 6006, 6026, 6031,
6036, 6051, 6062, 5609
6" Ruler
Non Slip Pad
1005
1004
Dot Kohl Flower Carving Kit. This kit
will get you started carving flowers from a
stick just like Dot Kohl of Alden, NY
makes.
Contains the following:
Warren 3.75 ANA Handle with Wrench
(Item 945)
Pack of 3 Warren 10-B blades, Sharp (Item
941)
The Little Book of Whittling (Item
9781565237728)
Item 813……..$29.00
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 10
RELIEF CARVING SETS
These sets were specially developed by Stadtlander Woodcarvings for relief carving.
Save over 10% from the cost of purchasing individually.
Henry Taylor Relief Carving Sets.
Starter Set (Set 1)
Ten basic palm gouges to get
you started.
Fact. Edge:
Item 801…...$200.00
Sharp:
Item 802….. $220.00
Expansion Set (Set 2)
Ten additional palm gouges to
expand Set 1.
Fact Edge:
Item 803….….$200.00
Sharp:
Item 804…….$ 220.00
Ramelson Relief Carving Sets.
Starter Set (Set 3)
Expanded Set (Set 4)
Economical set with ten basic
Ten additional palm gouges
palm gouges for relief carving.
to expand Set 3.
Fact. Edge:
Fact. Edge:
Item 805… $125.00
Item 806… $180.00
Sharpened:
Sharpened:
Item 811....$150.00
Item 812 …$205.00
SIZE
SWEEP
ITEM
(Sharpened)
SIZE
SWEEP
ITEM
(Sharpened)
SIZE
3/8"
1/8"
1/4"
1/2"
1/2"
1/4"
1/16"
1/8"
1/16"
1/8"
Skew
3
3
3
7
8
11
11
45 deg V
45 deg V
302038
303112
303125
303150
307150
308125
311106
311112
345106
345112
1/4"
3/4"
5/8"
5/8"
1/8"
3/8"
5/8"
3/16"
1/4"
1/4"
Skew
3
6
7
8
9
9
11
11
45 deg V
302025
303175
306162
307162
308112
309138
309162
311118
311125
345125
5/32" Chisel
3/8"
Skew
3/8"
3
5/8"
3
1/2"
7
5/16"
8
1/16"
11
1/8"
11
3/32" 45 deg V
9/64" 60 deg V
SWEEP
ITEM #
(Sharpened)
2121
2150
2210
2220
2410
2520
2710
2720
2810
2830
SIZE
SWEEP
ITEM #
(Sharpened)
1/4" Skew
3/4"
3
3/4"
5
5/8"
7
5/32”
8
3/8"
9
5/8"
9
3/16"
11
1/4"
11
1/4" 60 deg V
2145
2230
2330
2415
2510
2620
2635
2730
2740
2850
FLEXCUT INTERCHANGEABLE TOOLS AND SETS
We carry a complete line of SK interchangeable tools. Refer to our internet store for all available items.
2 - Piece Craft Kit
Beginner 2-Blade Craft Carver Set has
everything to tackle a first time project. Includes: I interchangeable ABS
handle, 2 Carving Blades (V-Tool &
Gouge), 2 Leaf Carving Blanks, 24-page
Manual & Project Guide and Instructional DVD.
Item 533 ……. $30.95
5 pc. Craft Carver Set
Entry level tool set with Flexcut’s quick
connect ABS handle. The 4 interchangeable blades and instruction manual are
enough to complete the carving blank
included. Item 535…..$51.95
Deluxe Starter Set
Our most complete set. Includes ABS
Quick Connect Handle, KN12 Cutting
Knife, Quick Connect Power Handle,
Flexcut SlipStrop and Compound, 16
Carving Tools, Wood Storage Box and
Free DVD version of Relief Carving in a
Different Light. Item 577... $208.95
Beginner 3-Blade Craft Carver Set
Includes: Interchangeable Palm Handle, 3 Carving Blades, Bass Wood Boot Blank, 16-page
Manual & Project Guide and Instructional
DVD. Item 534…..$39.95
11 - Piece Craft Kit
Entry level tool set comes with quick connect ABS handle. The 10 interchangeable
blades, and instruction manual, are enough
to complete the carving blank included.
Rolled up, this set is very portable and the
tool selection will fit most carving applications. Item 578 ……. $103.95
PALM TOOL SETS
7 Piece Carving Scraper Set
Any of the six contoured blades can
be used as a scraping edge. Power
handle included.
Item 576 ……. $49.95
Beginners Palm Set
Item 586…..$80.95
Micro-Palm Set
Item 532…..$72.95
Deluxe Palm Set, 9 Piece
Item 550 ..$150.95
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 11
FLEXCUT MICRO TOOLS
Flexcut's latest edition to their line of tools will help you with all the woodcarving
challenges you'll encounter.
NEW!
INDIVIDUAL TOOLS
MICRO TOOL SETS
DESCRIPTION
Chisel Set:
1/16", 1/8", 3/16" 1/4"
Skew Set
1/16", 1/8", 3/16" 1/4"
Sweep Set
1.5, 2, 3, 4 mm
Shallow U-Gouge Set
1.5, 2, 3, 4 mm
Deep U-Gouge Set
1.5, 2, 3, 4 mm
45° Parting Set
1.5, 2, 3, 4 mm
60° Parting Set
1.5, 2, 3, 4 mm
90° Parting Set
1.5, 2, 3, 4 mm
1.5mm Mixed Profile Set (All
6 of the 1.5 mm tools)
ITEM
PRICE
50689
$60.95
50690
$60.95
50695
$74.95
50700
$74.95
50705
$74.95
50710
$74.95
50715
$74.95
50720
$74.95
50721
$109.95
OTHER FEATURED PRODUCTS
Free Tool Roll Offer!
4 Pocket Tool Roll with the
purchase of every 4-pack
Micro Tool Set ($10 value)
Excludes 6 pack
Quick Connect ABS Handle
Made from high impact ABS plastic with yellow soft urethane for an exceptional grip. Fits any unhandled palm
tool.
Item 572...…. $15.95
Quick Connect Palm Handle
2" Quick connect ash handle. Interchangeable with any unhandled palm tool.
Item 573……. $15.95
SEE PAGE 18 FOR
FLEXCUT
SHARPENING
ITEMS
Quick Connect Palm Handle
4 1/2" Ash handle. Its added length allows for greater
power for larger tools. Fits any unhandled palm tool.
Item 575……. $15.95
Universal Adapter
Allow your unhandled SK Gouges to be used in any
number of reciprocating power carvers. AutoMach,
Proxxon, Wecheer, Ryobi. Item 574 ……. $22.95
CARVIN’ JACKS
ITEM
PRICE
1/16" Micro Chisel
1/8" Micro Chisel
3/16" Micro Chisel
1/4" Micro Chisel
1/16" Micro Skew
1/8" Micro Skew
3/16" Micro Skew
1/4" Micro Skew
50681
50682
50683
50684
50685
50686
50687
50688
50691
50692
50693
50694
50696
50697
50698
50699
50701
50702
50703
50704
50706
50707
50708
50709
50711
50712
50713
50714
50716
50717
50718
50719
$18.95
$18.95
$18.95
$18.95
$18.95
$18.95
$18.95
$18.95
$19.95
$19.95
$19.95
$19.95
$19.95
$19.95
$19.95
$19.95
$19.95
$19.95
$19.95
$19.95
$19.95
$19.95
$19.95
$19.95
$19.95
$19.95
$19.95
$19.95
$19.95
$19.95
$19.95
$19.95
1.5 mm Micro Sweep Tool
2 mm Micro Sweep Tool
1.5 mm Shallow U-Gouge
2 mm Shallow U-Gouge
1.5 mm Deep U-Gouge
2 mm Deep U-Gouge
3 mm Deep U-Gouge
4 mm Deep U-Gouge
1.5 mm V-Tool 45°
2 mm V-Tool 45°
3 mm V-Tool 45°
4 mm V-Tool 45°
1.5 mm V-Tool 60°
2 mm V-Tool 60°
3 mm V-Tool 60°
4 mm V-Tool 60°
1.5 mm V-Tool 90°
2 mm V-Tool 90°
3 mm V-Tool 90°
4 mm V-Tool 90°
Economy Quick Connect Palm
Handles for SK series interchangeable
tools. For hand use only (no mallets.)
Individually, Item 570……. $3.00
Six pack, Item 571...…….$20.00
Whittlin' Jack
Features a 1-1/2" Detail Knife and a 2" Roughing Knife.
Blades do not lock in place.
Item 585 … $53.95
Carvin' Jack
Includes Detail Knife, Straight Gouge,
Chisel, V-Scorp, Gouge Scorp, and Hook
Knife.
Right Hand, Item 581 ... $152.95
Left Hand, Item 582 ….. $152.95
Detail Jack
Able to handle a variety of projects start to finish, the Detail
Jack single blade removes wood from convex surfaces, while
its fine point details delicate areas.
Item 536 ……. $40.95
4-Blade Pocket Jack for Carvin'
Smaller version of the Carvin' Jack. Includes a
Detail Knife, Straight Gouge, Scorp and VScorp. Item 580 ……. $88.95
DESCRIPTION
Tri-Jack Pro 3 locking blades - a roughing knife, detail knife and mini-cutting
knife. Pistol Grip design minimizes hand
fatigue. Item 537 ……. $91.95
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 12
FLEXCUT KNIVES AND KNIFE SETS
Each carving knife and gouge is constructed with an ash handle and a high carbon steel blade which holds an edge extremely well.
Each blade is honed, polished, and ready to use. The handedness (right or left) of the knife should be chosen by how you carve, not
necessarily by whether you are left or right handed. Choose a right-handed knife if you are right handed and carve with the blade
towards you. If you carve away from yourself, choose a left-handed knife. Left-handers should choose the inverse. The mini-knives
have a smaller, faceted handle designed for multiple gripping styles.
ITEM
KNIVES
STYLE DESCRIPTION
PRICE
KN12
KN13
KN18
KN14
KN20
KN15
KN26
KN11
KN19
KN27
KN34
KN36
KN37
KN33
KN32
KN25
KN35
KN31
KN28
KN12
KN13
KN14
KN18
KN15
KN20
KN26
KNL26
KN11
KN19
KN27
KN34
KN35
KN36
KN37
KN31
KN32
KN33
KN28
KN25
KN16
Cutting Knife, Straight, 1-1/8" Blade Length
Detail Knife
Roughing Knife
Pelican Knife, Curved 1 - 5/8" Blade Length
Chip Carving Knife
Mini Chip Knife, 5/8" Blade Length
Hook Knife, 5/8" Right-Handed (shown)
Hook Knife, 5/8" Left-Handed
Skew Knife
Mini Pelican
Mini Detail
Skewed Detail Knife
Fine Detail Knife
Radius Knife
Hooked Skew Knife
Mini Detail Skew Knife
Detail Skew Knife
Hooked Push Knife
Upsweep Knife
3" Draw Knife with Sheath (for fan carving)
5" Draw Knife with Sheath
530
583
584
525
528
529
511
512
538
520
513
589
590
591
592
540
541
542
514
526
691
$20.95
$21.95
$23.95
$25.95
$21.95
$23.95
$29.95
$29.95
$17.95
$25.95
$26.95
$25.95
$25.95
$25.95
$25.95
$27.95
$27.95
$27.95
$24.95
$38.95
$47.95
KN16
SEE PAGE 18 FOR FLEXCUT SHARPENING
ITEMS
KNIFE SETS
3-Knife Starter Set
Set includes: Cutting Knife, Detail Knife,
Roughing Knife, and Flexcut Gold compound
Item 579 ……. $55.95
4 pc Carving Knife Set
Includes: KN12 Cutting Knife, KN13 Detail
Knife, KN18 Pelican Knife, KN19 Mini-Pelican
Item 595 ……. $86.95
Whittler’s Kit
Includes a KN13 Detail Knife, KN27 Mini-Detail Knife
and Flexcut Gold compound.
Item 539…..$46.95
Chip Carving Set
Includes a KN11 Skew Knife, KN15 Chip Carving Knife,
KN20 Mini-Chip Carving Knife. and Flexcut Gold compound.
Item 531…..$58.95
4 pc Beginner Palm and Knife Set
Includes: KN12 Cutting Knife, KN13 Detail Knife, FR306 #6 x 5/16" Sweep, FR307 70 deg.
x 1/4" V-Tool. *Mail-in offer included in each set for a FREE 4-Pocket Tool Roll ($10 Value)
Item 588 ……. $71.95
Detail Knife Set
Deluxe Knife Set
Set includes: KN19 Mini-Pelican Knife, KN20
Set includes 18 razor-sharp carving knives.
Mini-Chip Carving Knife, KN27 Mini-Detail
Mail-in offer included in each set for a
Knife and Flexcut Gold compound
FREE 18 Pocket Tool Roll! ($30 Value)
Item 587 ……. $69.95
Item 594 ……. $397.95
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 13
WARREN CUTLERY
HOBBY KNIVES
Basic Kit
KB3-W with Walnut
Handle
Item 932 $21.75
Basic Kit
KB3 with Plastic Handle
Item 931…..$21.50
Carving Kit
Combi - M97
Item 930 $46.00
Angled Straight
Small Chisel
Curved
Stencil
HANDLES
ITEM
PRICE
Rubber Handle, JRX 6.0 ANA, soft grip, 6"
with wrench
933
$16.25
Walnut Handle, CWH-3 , 4" long
934
$16.25
Rubber Handle, JR3.75 ANA, soft grip 4"
944
$15.00
Rubber Handle JRX3.75 ANA with wrench
945
$16.00
Rubber Handle, JRX3.0 ANA , short, 3-1/2”
948
$15.00
8-B (3 pc pkg)
940
$3.75
10-B (3 pc pkg)
941
$3.75
11-B (3 pc pkg)
942
$3.75
22-B (3 pc pkg)
943
$3.75
24-EX (3 pc pkg)
953
$3.75
20 (3 pc pkg)
955
$3.75
21 (3 pc pkg)
956
$3.75
LW6 Carving Blade, Single
LK5 Carving Blade, Single
957
$5.00
958
$5.00
954
$7.25
#1 Light Duty Knife and Blades
Round aluminum handle, 5/16" dia. x 4 3/4" long
with 4 jaw machined aluminum chuck for secure
blade positioning. Carbon steel blades.
DESCRIPTION
ITEM
PRICE
901
$2.50
(2 Angled Straight, I Small Chisel,
1 Curved, 1 Stencil)
902
$5.25
Angled Straight Blades, 5 Pack
903
$2.00
Curved Blade, 5 Pack
909
$3.00
Curved Blade, 100 Piece bulk
908
$46.75
Handle and one Angled
Straight Blade
Handle and 5 assorted Blades
BLADES
6SBL Carving Blade assortment pack, includes 1 blade each: 940, 941, 942, 943,
955, 956
#7 Woodcarving Knife and Blades
Black Plastic Handle with 4 jaw machined
aluminum chuck for secure blade
positioning. Carbon steel blades.
PRO PUMPKIN CARVING
KIT
LAMINATED STEEL GOUGES
Straight
These laminated steel gouges are hardened
to Rockwell 63 C Scale. The tools will hold
an edge many times longer than regular
forged chisels. Each tool comes fully sharpened with a mirror polished edge. Actual
size: 6 1/8" long x 7/8 wide.
SIZE
SWEEP
ITEM
PRICE
12 mm
15 mm
18 mm
12 mm
15 mm
3
5
5
8
8
921
922
923
924
925
$16.00
$16.00
$16.00
$16.00
$16.00
Contains:
• 1- JRX handle with lock-jaw and
wrench
• 3 narrow saw blades and 3 wide
saw blades.
• Comes with basic instructions!!
You can use all of Warren’s regular
woodcarving blades and chisels with
the JRX handle too!!
Item 951 …. $21.00
• Replacement Blades
Item 952…….$6.00
FISHTAIL
ITEM
PRICE
Straight
Fishtail
949
950
$18.00
$18.50
Angled
Convex
Concave
Semi-Concave
DESCRIPTION
Handle and one Straight
Blade
Straight Blade, 2 Pack
Convex Blade, 2 Pack
Assorted Blades, 5 Pack
(one each of blades shown
above)
ITEM
PRICE
904
$8.00
905
906
$3.00
$3.00
907
$7.75
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 14
OWEN’S WOODCARVER’S TOOL CARRIERS
Designed by Woodcarver and Woodworker Russell Owen, these high quality tool carriers organize your carving tools and
transports them safely. As these items are hand crafted and created upon ordering, delivery times will vary.
34 PIECE TOOL CARRIER
• Two back-to-back carriers are attached by rare earth magnets.
• When separated, gives easy access to your tools while carving.
• Overall dimensions: 15” long, 12” inches tall, 9 inches wide.
• 34 tubes total: 18 at ¾” dia. x 3” long, 4 at ¾” dia. x 5”, 8 at 7/8” dia. x
5 “, 4 at 1” dia. x 5”. Tubes are clear for ease in tool selection.
• Two built–in storage areas hold extra tools and supplies. Rare earth
magnets holds cover in place.
Item No. 1651.... $175.00
• Includes two additional storage tubes
• Baltic Birch and Maple. Polyurethane Satin Finish. 8 lbs Empty Weight.
60 PIECE TOOL CARRIER
Identical to 34 piece carrier with the following differences:
• Overall Dimensions:14" long x 11" wide x 12" high
• Contains basswood storage box in place of the two storage
compartments. Storage Box Outside Dimensions: 12" x 6" x 4"
• Contains 60 tubes to hold tools
• Diameters & depth of tube areas:
Item No. 1652.. .. $210.00
Item No. 1653.. .. $40.00
(12) @ 1/2" dia. x 4-3/4" deep, (16) @ 1/2" dia. x 2-3/4" deep
(18) @ 3/4" dia. x 2-3/4" deep, (14) @ 7/8" dia. x 4-3/4" deep
Optional Storage Box for 60 Piece Tool Carrier
• Slides on bottom for more storage. Dovetail construction.
• Comes with latch to secure storage compartment to tool carrier.
• Inside dimensions approx. 13" long x 10" wide x 6" high.
DURICK TOOL CARRIER
Designed by Woodcarver and Woodworker Ken Durick, these rugged tool carriers
organize your carving tools and transports them safely.
• Long sides slip out and reattach to outside dovetails while interior holder rotates 360 degrees
providing full access to all tools while carving
• Three styles are currently available: One style is undrilled (allowing you to drill your
own configuration.)
• Overall Dimensions:14" long x 10" wide x 13"
Single drilled
•
•
Double drilled
•
•
•
•
•
high
Single Drilled: 39 pre-drilled holes to hold
tools. Hole diameters & depths:
(14) @ 1/2" dia. x 3-1/2" deep
(13) @ 1/2" dia. x 4-1/2" deep
(12) @ 3/4" dia. x 4-1/2" deep
Double Drilled: 53 pre-drilled holes to hold tools.
Hole diameters & depths:
(14) @ 1/2" dia. x 3-1/2" deep
(1) @ 1/2" dia. x 4-1/2" deep
(38) @ 3/4" dia. x 4-1/2" deep
Single Drilled Item 1654.... $100.00
Undrilled: Disassembles and reassembles for
Double Drilled Item 1656.....$100.00
drilling holes to your own liking.
Undrilled
Item 1655… $100.00
Small storage compartment is 5-3/4 x 5-3/4 x 2”
wide.
Hardwood construction
Light: Empty Weight is approximately 5 lbs.
Comes with no protective finish making it possible to
woodburn your favorite designs.
Undrilled
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 15
TOOLHOLDERS
We offer a variety of styles to accommodate individual needs. Styles 1 and 2 fit easily into a shirt pocket and are ideal
for carvers “on the go.” All styles fit easily into most toolboxes. Canvas Toolholders contain a velcro strap to keep
toolholder closed and tools in place. Toolholders for palm gouges accommodate a maximum palm gouge handle diameter of 1 - 3/8 inch.
Styles 1 through 13 are made of canvas and are available in four colors. SPECIFY COLOR. We stock a large quantity of
toolholders, but please note we may not have all colors on hand and specifying a particular color may increase delivery time. Please
contact us for colors available or specify “no preference” on the order form.
DESCRIPTION
Small. Holds 5 Dockyard Microgouges or 2 Chip Carving Knives.
Small with two slots. Holds 2 Chip Carving Knives.
2 Slot Carving Knife. Holds 2 Bench Knives.
2 Slot Palm Gouge w/ pencil holder. 3 slots (2 palm gouges,1 pencil)
3 Slot Carving Knife. 3 Slots for 3 Bench Knives.
5 Slot Carving Knife. 5 slots for 5 Bench Knives.
12 Slot Palm Gouge. For palm gouges or chisels up to 8" long.
14 Slot Palm Gouge. Same as 1606 but 14 slots.
30 Slot Flexcut Interchangeable Tool Set Holder, plus 4 slots for handles
18 Slot, 1-2" wide, for mallet tools, Tan or Rust. With Flaps.
16 Slot, 1-1/2 to 2-1/4" wide, for mallet tools, Rust. With Flaps.
16 Slot, 2" wide, for mallet tools, Rust. With Flaps.
Messermeister Tool Roll, Black. 10 slots for holding Solingen chisels or other
tools up to 9" long x 3/4" diameter handle. Seals with 3-sided commercial
grade zipper. Durable polyester fabric with PVC backing.
1601
1602
1603
1604
Dimensions
(Closed)
3" wide x 6"
3" wide x 6"
4" wide x 8"
5" wide x 6"
5" wide x 7"
8" wide x 7"
11" wide x 8"
12" wide x 8"
13" wide x 8"
15" wide x 8"
16" wide x 8"
19" wide x 10"
14" wide x 22"
14" wide x 22"
14" wide x 22"
14" wide x 22"
14" wide x 25"
10-1/2" x 6"
1605
ITEM #
PRICE
1601
1612
1602
1603
1604
1605
1606
1608
1609
1610
1611
1613
1614
1615
1616
1617
1618
1625
$10.00
$10.00
$10.00
$12.00
$12.00
$15.00
$26.00
$28.00
$30.00
$32.00
$34.00
$35.00
$60.00
$60.00
$60.00
$45.00
$45.00
$20.00
1606
1607-1612
1613
1617-1618
Available Colors – Styles 1 through 13
1614-1616
1625
Maroon, Dark Green, Blue, Rust
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 16
MORE TOOLHOLDERS!
These types are made with 11 oz. greige natural duck canvas. They are stitched with a polyester spun thread and the ties
are made with 100% cotton webbing.
12 POCKET TOOL ROLL FOR DOCKYARD TOOLS
This tool roll will hold 12 of your favorite Dockyard tools, or any other tools that have a 3/8"
handle. There is a protective flap that goes over
the tools so they can't slip out after you roll it up
and tie it off. Item 1626… $10.95
12 POCKET TOOL ROLL FOR PALM
TOOLS
This tool roll is made of the same material as our
power carver's aprons, which proves to be really
tough for holding your tools.
Item 1628… $10.95
20 POCKET TOOL ROLL FOR
POWER GRIP TOOLS
This tool roll will hold 20 Power Grip
tools, which is their whole line. It will
also hold any other tools that have a 3/8"
handle. Item 1627… $11.95
12 POCKET TOOL ROLL FOR LARGE TOOLS
This tool roll is made of the same material as our power
carver's aprons, which proves to be really tough for holding
your tools. Measures 13" wide to hold most full size carving
tools. Item 1629… $12.95
SAFETYWEAR
CANVAS CARVING
APRON WITH SUEDE
FRONT
This apron is custom-sewn
from heavy, duck canvas
material with an oversized
suede patch. The power
carvers especially like it
when using the Karbide
Kutzall and Typhoon burs.
Item 1631… $24.95
WOODCARVER'S CANVAS
POUCH APRON
Made with extra-heavy, duck canvas
material like our power carvers
apron, this apron will last you until
you're all whittled out.
Item 1630… $24.95
Leather Thumb guard,
Closed End
Available in Small, Medium,
Large. Specify Size
Item No. 1002…..$1.00
Leather Finger guard,
Closed End
Available in Small, Medium,
Large. Specify Size
Item No. 1003 …... $1.00
Leather Finger guard,
Open End
Available in Small, Large.
Specify Size
Kevlar Protective Glove,
Dots on both sides, no wire reinforcing.
Available in X-Small (Child's), Small,
Medium, Large, X-Large. Specify Size.
XS (Child's)
Item No. 1021.. .. $7.00
S, M, L, XL
Item No. 1001.. .. $7.00
Kevlar Protective Glove with
Leather Face, (one side, no wire
reinforcing)
Available in X-Small (Child's), Small
(Women's), Medium, Large (Men's), XL, XXL
Specify Size and Handedness
(Right or Left)
XS, S, M, L, XL
Item No. 1012.. ..
$20.00
XXL
Item No. 1032.. ..
$21.00
Item No. 1013 …... $1.00
Whimp Wrap , Protective Tape
1" x 90' Item No. 1030…. $2.50
2" x 15' Item No. 1031 …..$3.00
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 17
SHARPENING
Leather Strops
Cowhide
Mini (8-1/4" long x 1-3/4" wide)
Item No. 1241... $5.00
12" long x 1-3/4" wide
Item No. 1054... $8.00
Pigskin (Superior)
Mini (10" long x 1-3/4" wide)
Item No. 1242…. $6.00
12" long x 1-3/4" wide
Item No. 1055…. $9.50
Dockyard Gouge and
V-Tool Strop
See page 6 for details.
Item No. 494… $25.00
Dunkle Blue Velvet Compound
Powder
Item No. 1057…….$8.00
Flexcut Gold
Solid
Item No. 1058... $8.95
Dunkle Platinum MX
Buffing Compound, 1 lb. Solid bar
Item No. 1029
Price: $10.00
Flexcut Slipstrop
Comes with strop, Flexcut
Gold, and wooden block
shaped for honing inside of V
-tools and gouges.
Item No. 1053 .. $15.95
Dunkle Strop Contains both a flat
edge and also a rounded edge for sharpening crooked knives. 13" long x 1-3/4"
wide.
Item No. 320
Price: $16.00
Flexcut Powerstrops
PWS 10
Item No. 1065
Price ...$22.95
Green Chrome
Solid
Item No. 1060 ... $7.00
PWS 20(Deluxe)
Item No. 1066
Price….. $37.95
Soft Arkansas with Pouch
1-3/4" x 4" x 1/2"
Item 1051…$8.00
Oar Tool Sharpener
See page 1 for details
Item 1024 …. $29.00
Sharpening Stone without
Pouch 1-3/4" x 4" x 1/2"
Item 1252…$7.00
Water Slipstone
320 Grit, 2-1/2" x 5"
Item No. 1243…$22.00
Belcher Honing Oil
For sharpening stones. 2 fl. oz.
Item No. 1052….$2.50
Flexcut Dual Sided Paddle Strop
Large! 10" x 3". Has both rough and
smooth leather sides. Comes with Yellow
Gold Compound.
Item 600…..$39.95
NEW!
Flexcut Knife Strop
8" x 2". Includes a 1
ounce bar of Flexcut Gold
Polishing Compound
Item 593…..$14.95
Burke Sharpener Supplies
Can be used for other needs!
Felt Wheel, 6" dia. x .75
Item No. 1244…$27.00
Cratex Strops, 3/8" x 1" x 6"
100 Grit
200 Grit
300 Grit
400 Grit
Item 1248…. $18.50
Item 1249…. $18.50
Item 1250…. $18.50
Item 1251…. $18.50
Leather Strip, 1-5/16" x 27"
Item No. 1245…$8.00
Emory Cloth, 1-1/2" x 25"
100 Grit Item No. 1246…$2.00
180 Grit Item No. 1247…$2.00
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 18
MORE SHARPENING!
DMT Dia-Sharp® and Diamond Whetstone Sharpening
Stones
Fast and easy, sharpen dry or with water. Durable long lasting
construction. Made in the USA.
• EEC=Extra Extra Coarse 120 Grit (Silver)
• EC=Extra Coarse 220 grit (Black)
• C=Coarse 325 grit (Blue)
• F=Fine 600 grit (Red)
• EF=Extra Fine 1200 grit (Green)
• EEF= Extra Extra Fine 8000 Grit (Tan)
DIASHARP
GRIT ITEM
Wallet Size
with Pouch
3 1/4" x 2" x .05"
1091
1092
1093
1167
1094
1095
1096
1159
1097
1098
1099
1166
1100
1101
1102
1124
1125
1126
1127
C
F
EF
3 pc Set
Mini-Hone
C
2.5" x .75"
F
4.5” OA Length
EF
3 pc Set
4”
C
4" x 7/8" x 3/16"
F
EF
6” Single-Sided
EC
6" x 2" x 1/4"
C
F
EF
6” Double-Sided C/EC
6" x 2" x 1/4"
F/EC
F/C
F/EF
PRICE
WHETSTONES
Mini Sharp
2-11/16" x 15/16" x
3/16" Closed
5-1/2” Long opened
4"
4-1/3" x 7/8" x 3/16"
With leather Sheath
6" Bench Stone
with plastic case
$14.25
$14.25
$14.25
$33.00
$8.75
$8.75
$8.75
$26.00
$16.00
$16.00
$16.00
$37.75
$37.75
$37.75
$37.75
$65.50
$65.50
$65.50
$65.50
GRIT ITEM PRICE
6" x 2" x 3/4"
EC
1128
$12.50
C
1129
$12.50
F
EF
EEC
EC
C
F
EF
EEF
EC
C
F
EF
1130
1131
1168
1132
1133
1134
1135
1169
1162
1163
1164
1165
$12.50
$12.50
$28.00
$28.00
$28.00
$28.00
$28.00
$28.00
$51.50
$51.50
$51.50
$51.50
DMT Diamond Wave
Diamond sharpener combines convex and concave abrasive
surfaces for longer sharpening strokes over traditional slip
stones. Radii tapers from 1/16" to 1". One tool can properly
maintain a wide range of curved surface tools like in-cannel
and out-cannel gouges.
1200 Grit (Extra Fine)
600 Grit (Fine)
Item 1113…. .. $65.50
Item 1114. .…. $59.95
HAND DRILLING
Mini Pin Vise with 12 assorted drills
Accepts drill sizes from #50 (.070) thru #80 (.0135)
Item No. 1105…. $18.00
HAND BURNISHERS
Double Ended Burnisher
6" x 5/16" Aluminum Handle. Comes with 1/8" ball and
1/8" spoon tips for smoothing.
Item No. 1079…. $7.75
Burnishing Set
6" x 5/16" Aluminum Handle with 4 interchangeable tips
(1/32", 1/16", 1/8" and 1/8" spoon tip).
Item No. 1080…. $8.75
Pounce Wheels
1/4" 18 TPI
5/16" 18 TPI
7/16" 15 TPI
3 Piece Set
Item No. 1108 …. $9.00
Item No. 1109 …. $9.00
Item No. 1110…...$9.00
Item No. 1111…..$26.00
4 pc Dental Pick Set
Stainless Steel. Assorted Tips
Item 1227…. $5.00
Deluxe Pin Vise with six assorted drills
Accepts drill sizes from #52 (.0635) thru #80 (.0135)
Item No. 1120…. $17.00
Swivel Head Pin Vise with two collets
Accepts drill sizes #80 (.0135) to #30 (1.285) Overall size:
3.5 x .30 in.
Item No. 1160…. $8.50
Mushroom Pin Vise
With reversible collet.
Item No. 1106…. $8.00
6 pc Assorted Hi Speed Drill Bits
#52 to #67
Item No. 1107…. $7.50
12 pc Assorted Hi Speed Drill Bits
#53 to #67
Item No. 1121…. $14.00
#052(.0636) Hi Speed Drill Bit
Single
Item No. 1123…. $1.00
12 pack
Item No.1161….$10.50
Carving Drills:
1/16" shank, Item 10851…. $19.40
3/32" shank, Item 10852…. $19.40
1/8" shank, Item 10853…. $19.40
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 19
NEW!! KUTZALL HAND RASPS
For more information, refer to our internet store.
NEW!
New! Kutzall Carbide-Coated Hand Rasps
Using Kutzall carbide tooth technology, easily tackle an assortment of
materials where conventional rasps fail. Experience the many benefits of Kutzall today.
Kutzall Hand Rasps are an essential tool for any carver. Whether you’re shaving material from intricate areas or hand
carving free-form curves, Kutzall Hand Rasps will give you the precision you need to get the job done.
- Long-lasting! Carbide coating outlasts standard rasps many times over.
- Handy! Cut in any direction; great for confined spaces.
- Available in two different coating types: Kutzall Original (recommended for wood), and Kutzall Grit. See below for
descriptions.
- Available in coarse and fine grades.
- Available in 6 inch and 8 inch sizes.
- Come in three popular shapes; Flat, Half-Round, and Warding.
"Kutzall Grit Hand Rasps bring the convenience of power carving to hand carvers." - Woodcarving Illustrated.
HAND FILING
Needle Files (Fine Cut)
12 pc set, 3mm (1/8") x140 mm (5-1/2")
Item 1009…. $6.00
Needle Files (Superfine Cut)
12 pc set, 2 mm x 100 mm (4”)
Item No. 1015…. $6.00
FLAT
Needle Files (Coarse)
10 pc set, 5 mm x 180 mm (7-1/4")
Item No. 1232 ….. $9.00
HALF ROUND
ITEM #
19501
19502
19503
19504
19505
19506
19507
19508
19509
19510
19511
19512
19513
19514
19515
19516
19517
19518
19519
19520
19521
19522
19523
19524
DESCRIPTION
Flat
Flat
Half Round
Half Round
Warding
Warding
Flat
Flat
Half Round
Half Round
Warding
Warding
Flat
Flat
Half Round
Half Round
Warding
Warding
Flat
Flat
Half Round
Half Round
Warding
Warding
WARDING
Coarse
Fine
Coarse
Fine
Coarse
Fine
Coarse
Fine
Coarse
Fine
Coarse
Fine
Coarse
Fine
Coarse
Fine
Coarse
Fine
Coarse
Fine
Coarse
Fine
Coarse
Fine
Original
Original
Original
Original
Original
Original
Original
Original
Original
Original
Original
Original
Grit
Grit
Grit
Grit
Grit
Grit
Grit
Grit
Grit
Grit
Grit
Grit
SIZE
6"
6"
6"
6"
6"
6"
8"
8"
8"
8"
8"
8"
6"
6"
6"
6"
6"
6"
8"
8"
8"
8"
8"
8"
PRICE
$25.00
$25.00
$40.00
$40.00
$25.00
$25.00
$30.00
$30.00
$49.00
$49.00
$30.00
$30.00
$25.00
$25.00
$40.00
$40.00
$25.00
$25.00
$30.00
$30.00
$49.00
$49.00
$30.00
$30.00
Riffler Files, Medium
10 pc set, 3 mm (1/8") x 140 mm (5-1/2")
Item No. 1008 ….. $8.00
Riffler Files, Medium
10 pc set, 3 mm x 180 mm (7.25")
Item No. 1231 ….. $8.00
Coarse Wood Rasp, Heavy
8 pc set, 5.5 mm x 200 mm (7-7/8")
Item No. 1233 ….. $10.00
Coarse Wood Rasp
10 pc set, 3 mm x 180 mm (7.25")
Item No. 1234 ….. $10.00
Coarse Wood Rasp, Italian
8 pc set 4.5 mm x 180 mm (7.25")
Item No. 1235 ….. $11.00
Diamond Riffler File Set
10 pc set, 5-1/2"
Item No. 1237 ….. $11.00
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 20
SANDING AND ABRASIVES
Size (Inches)
HAND SANDING
Grit
Item
Price
80 1138 $1.25
120 1139 $1.25
ABRANET SANDING SHEETS
2-3/4 x 8
Abranet‘s durable mesh-like surface provides dust free dry sanding and an
enhanced lifespan over traditional abrasives. Sheets can be used alone or
with a sanding pad or vacuum block.
180 1140 $1.25
240 1141 $1.25
320 1142 $1.25
400 1143 $1.25
2-3/4" x 8" variety pack - 1 sheet each 80, 120, 180, 240, 320, 400 Grits Item 1144…...$7.00
3" x 4-1/2" sampler pack - 1 sheet each 80, 120, 240, 320, 400, 600 Grits Item 1151….$5.00
4-1/2" x 12" variety pack - 1 sheet each 80, 120, 240, 320, 400, 600 Grits Item 1152….$11.00
HAND PADS
Hand Pads assist the user in holding the Abranet sheets and helps insulate the
user from the heat generated during use. Measure 3" x 4". Comes with Velcro hook on one face.
Soft (3/4" thick) Item 1154…$8.00
Medium (1/2" thick) Item 1155…$8.00
Firm (1/4" thick) Item 1156…$8.00
80 1170 $1.00
120 1171 $1.00
3 x 4-1/2
1153
240 1172 $1.00
320 1173 $1.00
400 1174 $1.00
600 1175 $1.00
80 1145 $2.00
HAND PADS
PROTECTOR PAD
Protector Pads serve two important functions. First, they are made with a special Velcro hook that provides a much more positive grip to the Abranet than a standard holder can by itself. This prevents the abrasive from coming loose or off during the sanding process. Secondly, they prevent damage to the Velcro face
on your disc holder which can occur due to the open mesh design of the Abranet.
Item 1153….$4.50
Eversand Sanding Pad
Outlasts sandpaper 10 to1!
Two-Sided. 2" x 2 3/4"
100/220 Grits (Coarse/Medium Fine)
Item No. 1070....$1.00
120 1146 $2.00
4-1/2 x 12
240 1147 $2.00
320 1148 $2.00
400 1149 $2.00
600 1150 $2.00
Zona Sanding Stick with 320 grit belt
5 1/4" long x 3/4" wide.
Item 10839….$4.60
280/400 Grits (Fine/Extra Fine)
Item No. 1071....$1.00
Sanding Stick with belt (320 Grit)
6 1/2" long x 1/4" wide.
Item No. 1072….$4.50
With extra belt: Item 1122.....$7.00
Extra Sanding belts.
5 piece package.
Available in 80, 120, 240, 320, 400 or 600 Grit
Specify Grit. Item 1073….$8.00
Extra sanding belts. 4 piece package.
150 Grit Item 10840….$4.60
240 Grit Item 10841….$4.60
320 Grit Item 10842….$4.60
Extra sanding belts. 6 piece package.
2 each, 150, 240, 320 grit.
Item 10843….$6.90
Assorted 5 pc package:
1 each 120, 240, 320, 400, 600 Grit
Item 1112….$7.00
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 21
FOREDOM POWER CARVING EQUIPMENT
We carry a full line of Foredom products! New and popular items are shown here. For all of the items we offer and
more information, refer to our internet store.
Foredom 5240 Powercarving Craft Kit—Everything you need to get started powercarving!
Foredom’s popular Flex Shaft 1/6 hp SR Series motor and hanging bale provides you with variable speeds up to
18,000 RPM, both forward and reverse, making this useful for tackling wood-grain problems. The versatility is also
helpful to left handers! Comes with FCT-1 Solid State Electronic Foot Control
Contains:
1. Flexible 39" key-tip inner shaft and outer sheath for connecting to any of Foredom's interchangeable handpieces.
2. No. 44 tapered collet style handpiece and 3 collets—3/32”, 1/8” and 1/4”
3. Flexible Shaft Grease
4. 3-disc DVD Fur, Feathers and Fins
5. 27-piece accessory kit and and tool holder featuring variety of Foredom Scotch-Brite items including Typhoon
burs, Blue Stones, sanding discs and much more.
6. Two-year limited warranty (90-day limited warranty on handpiece)
Item 10001……….$260.00
Foredom 5400 1/3 HP High Torque Powercarving Craft Kit
Kit features Foredom’s Flex Shaft 1/3 hp TX Series motor and hanging bale, delivering
higher torque at variable speeds from 500 to 15,000 RPM. Comes with heavy duty cast C.SXR speed control that
converts AC current from outlet to DC. Also contains items 1 thru 6 of the 5240 Kit
Item 10002……….$330.00
K.EM-50 Dial Speed Chisel Kit for SR Series Motors
Designed for SR Series motors (including the 5240 Kit above), includes reciprocating hammer-style handpiece (10139), C.EM-1 Dial Speed Control (10017) and 11 Chisels Item 10009……….$150.00
K.EMX-50 Dial Speed Chisel Kit for TX Series Motors
Designed for TX Series motors (found in the 5400 Kit above), set includes same reciprocating hammerstyle handpiece and chisels found in Item 10009 and includes C.EMX-1 Dial Speed Control (10018).
Item 10010……….$160.00
MOTORS AND CONTROLS
Table Top Dial Control, SR Series, EM-1
1/6 HP Flex Shaft Motor, SR
Foot Operated Speed Control, SR Series, FCT-1
Foot Operated Speed Control, SR Series, SCT-1
Table Top Dial Control, TX Series, EMX-1
1/3 HP Flex Shaft Motor, Series TX
Foot Operated Speed Control, Series TX, SXR-1
Description
ITEM
PRICE
For use with motor 10019 or kit 10001
Comes with motor bale for hanging
Heavy duty plastic housing, for motor 10019
Metal housing, for motor 10019
For use with motor 10136 or kit 10002
Comes with motor bale for hanging
Metal housing, for motor 10136
10017
10019
10020
10827
10018
10136
10137
$69.00
$160.00
$35.00
$69.00
$85.00
$190.00
$80.00
ITEM
HANGERS AND RESTS
Price
Double Motor Hanger with Mounting Clamp
10011 $49.00
Wall Mount Double Motor Hanger
10012 $69.00
Handpiece Rest: For motor hangers with 1/2” or smaller rods.
10013
MAINTENANCE
$9.00
Foredom Flexible Shaft Grease, 1.oz.
Item 10138….. $3.50
10012
10013
10011
MSMK-8, Maintenance Kit for 1/6HP SR Series. Kit includes an inner shaft, pair of motor brushes, Flexible
Shaft Grease, and operation manual.
Item 10175………$18.00
MSMK-10 Maintenance Kit for 1/8 HP and older model (2005 or older) SR Series 1/6 HP Series.
Item 10174………$18.00
Lubricated S-93 Shaft and S-77 Sheath for SR, TX, L, S, R, & CC Series Motors, 39" Long
Item 10762………$31.00
Sheath Only: Item 10763…. $15.00
Shaft Only: Item 10764...... $11.00
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 22
NEW!!
Foredom Portable Rotary Micromotor Kits
3/32" or 1/8" Collet
Control unit with built-in rechargeable Li-ion battery features a digital RPM display at the top that makes it easy to monitor speed
as you work. The dial on the front adjusts speed from 0 – 30,000 RPM.
* Run time is approximately 5 hours, depending on how long the micromotor is in continuous use when in battery mode, or plug it
in for day-long use. Battery charge time is 3 hours.
* Perfect for users who work at multiple stations, or for signing/personalizing work pieces at craft and outdoor fairs when no
power is available.
* The handpiece has a twist release rotary type collet for easy changes of 2.35mm (3/32″ ) or 1/8″ shank burs, depending on
choice
of collet installed.
* Collets can be installed and changed. Consider Collet Adapters, that step down collet sizes without having to switch out a
collet, for handpieces with 1/8″ collets.
* Two Year Limited Warranty
Kit includes:
• HP4-310 Control Box
• H.MH-130 Handpiece with 2.35mm (3/32")
collet installed or H.MH-13018 with 1/8" collet
• HP8-306 Charger/Adapter
• HP4-933 Handpiece Cradle
• HP8-163 Spare pair of motor brushes
• Collet Changing Wrenches HP4-993
Kit with 3/32” collet installed. Item 10794….$319.00
Kit with 1/8” collet installed. Item 10795….$319.00
installed.
3/32” collet Item 10825….$31.50
1/8” collet Item 10826….$31.50
1/8” to 1/32” reducer Item 10798…. $16.30
Handpiece (1/8” collet) Item 10855…$161.00
Nylon Carrying Pouch
Lightweight woven nylon carrying
pouch has pockets for securing new
Portable Micromotor Control Unit and
Handpiece.
Item 10796….$19.00
Plastic Carrying Case
with custom laser cut
protective foam insert.
Item 10797….$50.00
Angle Grinder
New Angle Grinder attachment designed for use with H.30 Handpiece. Works with 2" and smaller discs and 2" wheels with 3/8" arbor
holes. Optimum Operating Speed: 10,000 to 15,000 RPM, Maximum Speed: 18,000 RPM for short intervals
Without H.30 Handpiece (#10006), Item 10854 ….$90.00
With H.30 Handpiece (#10006), Item 10742……….$120.00
ANGLE GRINDER ACCESSORIES
ITEM
PRICE
69224 Collet Adaptor w/1/8" & 3/32" collets and wrench set
69212 Outer Wheel Arbor, Short Hub
69212-L Outer Wheel Arbor, Long Hub
10759
10240
10743
$48.00
$4.00
$4.00
Flap Sander Discs
2” Dia. x 3/8” Dia arbor hole
Tungsten Carbide Discs
60 Grit
120 Grit
320 Grit
240 Grit
600 Grit
2” Dia. x 3/8” Dia arbor hole
Flat Face, Coarse Item 10755
Flat Face, Fine
Item 10756
Round Face, Coarse Item 10757
Round Face, Fine
Item 10758
$38.00 Each
ROUND FACE
FINE
FLAT FACE
COARSE
Item 10820
Item 10821
Item 10822
Item 10823
Item 10824
$2.30 Each
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 23
HANDPIECES
ITEM #
PRICE
44T General Purpose 1/4”, 5-5/8” long
10007
$60
10005
$60
10006
$68
10008
$60
10015
$65
Accepts accessories with up to 1/4" diameter shanks. Prelubricated ball bearings require no additional lubrication.
Comes with 3/32", 1/8" and 1/4" collets, pin and wrench
43T General Purpose, 1/4”, 4-1/2” long
Shorter version of 44T
30T General Purpose 5/32”, 5-3/16” long
Pre-lubricated ball bearings require no additional lubrication. Comes with Chuck Key in molded plastic handle.
H28 General Purpose 1/8”, 5-1/4” long
Pre-lubricated ball bearings. Comes with 3/32" and 1/8"
collets, pin and wrench
H8 General Purpose 5/8”, 6-1/8” long
10016
$90
Hand Chisels
10163
$12.50
10139
$50
Can be replaced by user. Requires periodic lubrication.
H50 Power Chisel 1”, 6” long
Hand Piece Grip
Item 10838…..$2.00
Same specs as 10015 above, but with Duplex Spring for
added flexibility. Spring subject to breakage and not covered by warranty. Recommended only for experienced flex
shaft users.
Replacement Duplex Spring for Item 10016
HP60, 4 Pc Collet Set
Handpieces 8, 8D, and 28:
1/32”, 1/16”, 3/32” 1/8”
Item 10747…$30.00
$8.00 each
for H.30 Style and H.44T Handpieces.
Pre-lubricated ball bearings. Comes with 3/32" and 1/8"
collets and chuck wrenches. Chuck guard slides back when
changing burs
H8D General Purpose 5/8”, 9-3/8” long
HP440, 7 pc Collet Set
Fits Handpieces 44T and 44
1/16”, 3/32”, 1/8”, 5/32”
3/16”, 7/32”, 1/4”
Item 10746…$49.00
or $8.00 each
We carry 22 chisels used in conjunction with the Foredom Reciprocating
Hammer style handpiece. Refer to our
website for types.
Attaches to any flex shaft with a standard key tip shaft.
Must ONLY be used in forward rotation. Recommended
to be used with dial speed controls to maintain RPMs of
3,000-10,000.
Organize with Foredom Tool Holders!
DRESS-CLEAN-RESHAPE
Abrasive Cleaning Block
3 x 3 x 1-1/2”. Restores clogged areas and voids
in abrasive stones, typhoons, and other abrasives. Run at low speed and hold accessory
against block to remove embedded grinding
debris. Use even after cleaning with diamond
hones.
Item 10133….. $8.30
Brass Brush
Used to clean Typhoons, sanding sleeves,
discs, and carbides. 5/8” wide x 5-3/4” long.
Item 10744….. $5.00
Wet Stick
Use wet for unloading plated and
sintered diamond points. 2 x 1/2 x 3/4
Item 10745….. $2.90
Bit Storage Box
Double Wall polyethylene construction –
nearly indestructible. Textured Black. 9.5
x6.5x3.0 inches $25.00 Each
114 Hole Rotating Bur and Tool Holder for
3/32 burs. 7" wide by 4" high with center cup.
Item 10003….. $16.50
126 Hole Rotating Bur
Holder, 7" wide, 4" high. Holds 69-3/32" or
1/8" burs, 12-1/4" burs, and 45-1/16" burs.
Item 10004….. $16.50
112 Hole Rotating Bur and Tool Holder.
92 holes for 1/8" burs, 13 for 1/4" burs, and 7
for drill bits 1/16" to 5/32". 7" wide, 4" high.
Item 10022….. $16.50
27 Piece Accessory Kit
Features bur holder, purple sanding bands,
CeramCut Blue Stones, Typhoon Burs, Mandrels, Diamond Points, Flexible Shaft Grease,
and more.
Item 10021….. $126.00
Available in 3 styles
Item 15005….Holds 155 (3/32”), 62 (1/8”) and 16 (1/4”) shank bits
Item 15006….Holds 186 (3/32”), and 62 (1/8”) shank bits
Item 15007….Holds 62 (3/32”) and 128 (1/8”) shank bits
Bur Holder, Small Round, w/ Cover, for 24 1/8" & 24 3/32" Shank
Burs
Item 10741……. $4.00
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 24
FOREDOM TYPHOON BURS
Typhoon Burs feature unique longer lasting structurally
aligned tungsten carbide points. Use fine grits (blue) for
general shaping and sanding. Use coarse grits (red) for
rapid and aggressive shaping and roughing out work.
FINE
COARSE
(BLUE) (RED)
Item #
Item #
BALL NOSE
Fine
Coarse
Price
5/16” dia., 1/2” long, 3/32” shank
10076
N/A
$20.00
3/16” dia., 7/8” long, 1/8” shank
10090
10089
$20.00
5/16” dia., 1/2” long, 1/8” shank
10092
10091
$17.00
5/16” dia., 1-1/4” long, 1/4” shank
10104
10103
$20.00
13/16” dia., 1-1/4” long, 1/4” shank
10106
10105
$28.00
9/16” dia., 3/4” long, 1/4” shank
10108
10107
$20.00
CYLINDER
Fine
Coarse
Price
5/16” dia., 1/2” long, 3/32” shank
10075
N/A
$20.00
5/16” dia., 1/2” long, 1/8” shank
10100
10099
$17.00
Smooth End, 5/16” dia., 1/2” long, 1/8” 10102
shank
10101
$17.00
Smooth End, 9/16” dia., 3/4” long, 1/4” N/A
shank
10131
$20.00
13/16” dia., 1-1/4” long, 1/4” shank
10128
10127
$28.00
DOVE TAIL
Fine
Coarse
7/16” dia., 1/2” long, 1/8” shank
10098 10097
Price
$17.00
Typhoon Dove Tail, Fine Grit,
10098
ROTOR SAW (Image below)
Fine
Coarse
11/16” dia., 3/16” long, 1/8” shank
10094 10093
Price
$17.00
Rotor Saw
(fine) 10094
Ball Nose (fine) 10076
Ball Nose (coarse) 10103
Cylinder (fine) 10100
Cylinder, Smooth End,
(fine) 10101
Cylinder, Smooth End,
(Coarse) 10131
BUD
Fine
Coarse Price
5/16” dia., 1/2” long, 3/32” shank
10074 N/A
$20.00
5/16” dia., 3/4” long, 3/32” shank
10078 N/A
$20.00
5/16” dia., 3/4” long, 1/8” shank
10088 10087
$17.00
FLAME
Fine
Coarse
Price
5/16” dia., 1/2” long, 3/32” shank
10077
N/A
$20.00
7/16” dia., 5/8” long, 1/8” shank
10096
10095
$17.00
7/8” dia., 1-3/8” long, 1/4” shank
10110
10109
$28.00
TAPER
Fine
Coarse Price
3/8” dia., 3/4” long, 1/4” shank
10114
10113
$20.00
3/16” dia., 3/4” long, 3/32” shank
10073
N/A
$20.00
5/8” dia., 1-1/16” long, 1/4” shank
N/A
10111
$22.00
3/16” dia., 3/4” long, 1/8” shank
10084
10083
$20.00
5/16” dia., 1/2” long, 1/8” shank
10086
10085
$17.00
5/16” dia., 15 degree, 1-1/2” long,
1/4” shank
10120
10119
$20.00
13/16” dia., 1-3/8” long, 1/4” shank
10122
10121
$28.00
10124
10123
$20.00
10125
$28.00
Flame, (fine) 10077
Bud,(fine) 10078
SPHERE
Fine
Coarse
Price
5/16” dia., 3/32” shank
10072
N/A
$20.00
5/16” dia., 1/8” shank
10080
10079
$17.00
7/16” dia., 1/8” shank
10082
10081
$17.00
9/16” dia., 1” long, 1/4” shank
9/16” dia., 1/4” shank
10118
10117
$20.00
13/16” dia., 5 degree, Smooth End, 1- N/A
1/4” long, 1/4” shank
7/8” dia., 1/4” shank
N/A
10115
$24.00
Long taper (fine) 10084
Sphere, Fine 10072
15 deg Taper 10120
10125
Sphere, Coarse, 10115
Taper (fine) 10086
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 25
KUTZALL BURRS
Kutzall Burrs are the perfect companions for your rotary carving tools. Burrs are available in a variety of grit and shape combinations, allowing you to select the perfect burr for the job. Available in 1/4 inch and 1/8 inch shank sizes.
Like all Kutzall tools, burrs are hand made in America using incredibly durable materials, primarily tungsten-carbide, and are engineered to cut faster, last longer, and require less cleaning than other comparable rotary carving tools. Check out the diverse selection of Kutzall Burrs below.
Fine-F
(Gold)
1/4” SHANK
Ball Nose
Ball Nose
Ball Nose
Ball Nose
Ball Nose
Ball Nose
Ball Nose
Ball Nose
Cylinder
Cylinder
Cylinder
Flame
Flame
Flame
Sphere
Sphere
Sphere
Taper
Taper
Taper
Taper
Taper
Taper
XCoarse-XC
(Red)
Coarse– C
(Silver)
SIZE
GRIT COLOR ITEM
1/4" x 1-3/4"
C
Silver
19551
1/4" x 1-3/4"
F
Gold
19552
1/4" x 1-3/4" XC
Red
19553
3/4" x 1 1/8"
C
Silver
19554
3/4" x 1 1/8"
F
Gold
19555
3/4" x 1 1/8" XC
Red
19556
1/2" x 1-1/2"
C
Silver
19557
1/2" x 1-1/2"
F
Gold
19558
3/4" x 1"
C
Silver
19559
3/4" x 1"
F
Gold
19560
3/4" x 1"
XC
Red
19561
1/2" x 1"
C
Silver
19562
1/2" x 1"
F
Gold
19563
1/2" x 1"
XC
Red
19564
1"
C
Silver
19565
1"
F
Gold
19566
1"
XC
Red
19567
1/4" x 1-3/4"
C
Silver
19568
1/4" x 1-3/4"
F
Gold
19569
1/4" x 1-3/4" XC
Red
19570
3/4" x 1 1/8"
C
Silver
19571
3/4" x 1 1/8"
F
Gold
19572
3/4" x 1 1/8" XC
Red
19573
PRICE
$14.50
$14.50
$14.50
$18.75
$18.75
$16.75
$18.75
$18.75
$17.50
$17.50
$16.75
$14.50
$14.50
$14.50
$21.50
$21.50
$21.00
$14.50
$14.50
$14.50
$17.50
$17.50
$17.50
1/8” SHANK
Ball Nose
Ball Nose
Ball Nose
Ball Nose
Cylinder
Cylinder
Cylinder
Cylinder
Dove Tail
Dove Tail
Flame
Flame
Rotor Saw
Rotor Saw
Sphere
Sphere
Sphere
Sphere
Taper
Taper
Taper
Taper
SIZE
GRIT COLOR ITEM
1/8" x 3/4"
C
Silver
19581
1/8" x 3/4"
F
Gold
19582
1/4" x 1/2"
C
Silver
19583
1/4" x 1/2"
F
Gold
19584
1/8" x 1"
C
Silver
19585
1/8" x 1"
F
Gold
19586
1/4" x 1/2"
C
Silver
19587
1/4" x 1/2"
F
Gold
19588
3/8" x 1/2"
C
Silver
19589
3/8" x 1/2"
F
Gold
19590
1/4" x 1/2"
C
Silver
19591
1/4" x 1/2"
F
Gold
19592
3/4" x 1/8"
C
Silver
19593
3/4" x 1/8"
F
Gold
19594
1/4"
C
Silver
19595
1/4"
F
Gold
19596
3/8"
C
Silver
19597
3/8"
F
Gold
19598
1/8" x 3/4"
C
Silver
19599
1/8" x 3/4"
F
Gold
19600
1/4" x 1/2"
C
Silver
19601
1/4" x 1/2"
F
Gold
19602
PRICE
$11.25
$11.25
$13.25
$13.25
$11.25
$11.25
$13.25
$13.25
$15.00
$15.00
$14.25
$14.25
$14.50
$14.50
$13.25
$13.25
$13.25
$13.25
$11.25
$11.25
$13.25
$13.25
RUBY CARVERS
Fine, Coarse and Super Coarse (SC) Grits.
Shank size of all Ruby Carvers is 3/32”
SPHERE
11/64”
9/32”
1/2”
Grit
Item
Price
Fine
SC
Fine
Coarse
SC
Fine
10401
10451
10407
10429
10457
10416
$9.00
$11.00
$10.00
$10.00
$12.00
$13.00
Fine
SC
Fine
SC
Fine
Coarse
SC
Fine
SC
Fine
SC
10402
10452
10403
10453
10412
10431
10462
10405
10455
10406
10456
$9.00
$11.00
$9.00
$11.00
$10.00
$10.00
$12.00
$9.00
$11.00
$9.00
$11.00
10407
FLAME
1/8” dia. X 11/64”
5/32” dia. x 1/4”
1/4” dia. x 1/2”
Elongated, Thin
7/64” dia. x 5/16”
Elongated
9/64” dia. x 11/32”
7/32” dia x 3/8”
Fine
SC
Coarse
10404 $9.00
10454 $11.00
10435 $10.00
Grit
Item
1/4” dia. x 7/16”
Fine
SC
10408 $10.00
10458 $12.00
13/64” dia x 11/32”
Coarse
Fine
5/16” dia x 1/2”
Coarse
Fine
Inverted Pear
Coarse
1/4” dia x 7/16”
SC
Inverted Pear, 3/16” x 3/8” Coarse
Price
10436 $10.00
10414
10427
10409
10430
10409
10433
$13.00
$10.00
$10.00
$10.00
$12.00
$10.00
10410
10460
10434
10411
10461
10432
10413
10463
10415
10426
10466
10437
10464
10428
10465
$10.00
$12.00
$10.00
$10.00
$12.00
$10.00
$10.00
$12.00
$13.00
$10.00
$17.00
$10.00
$17.00
$17.00
$17.00
OTHER SHAPES
10402
10462
CYLINDER, ROUND TOP
1/8” dia, x 7/32”
PEAR
10404
Oval, 9/32” x 7/16”
Oval, 9/32” x 7/16”
Oval, 7/32 x 3/8”
Bud, 7/32” x 7/16”
Bud, 7/32” x 7/16”
Bud, 3/16” x 3/8”
Taper, 1/4” dia. x 1/2”
Taper, 1/4” dia. x 1/2”
Tree, 5/16” dia. x 5/8”
Tree, 5/16” dia. x 5/8”
Tree, 5/16” dia. x 5/8”
Cone, 3/16” x 1/2”
Cone, 3/16” x 1/2”
Cone, Flat Top, 1/4 x 3/4”
Cone, Flat Top, 1/4 x 3/4”
Fine
SC
Coarse
Fine
SC
Coarse
Fine
SC
Fine
Coarse
SC
Coarse
SC
Coarse
SC
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 26
DIAMOND CARVERS
SAPPHIRE CARVERS
Slightly more abrasive than regular rubies, but less than the coarse. Sapphires last longer than the rubies.
Shank size of all individual Diamond Carvers is 3/32”
Shank size of all Sapphire Carvers is 3/32”
10301 10302 10303 10304
$6.00 $9.70
$9.70
$5.30
10305 10306
$6.00
10307 10308 10309
$8.00
Dia-Ruby Pad
Item
Price
Tree
10683
$13.00
Pear
10684
$13.00
Flat Taper
10685
$13.00
Ball
10686
$13.00
Taper
10687
$13.00
Flame
10688
$11.00
Bud
10689
$11.00
Taper
10690
$11.00
$9.40 $9.40 $16.00
10310
10311
10312
10313
10314
10315
$16.00
$16.00
$18.00
$12.00
$14.00
$6.00
Composite Cleaning Pad for
cleaning diamond, ruby and
sapphire carvers. Not a stone,
but a composite material—will
not dull instruments!
ITEM 10344…..$13.50
10316 10317 10318 10319 10320 10321
10322
10323
Oval
10691
$11.00
$7.00
$6.00
$19.00
Ball Nose
10692
$11.00
Pear
10693
$11.00
Taper
10694
$11.00
$9.70
$9.70
$11.00 $6.00
$8.00
10324 10325 10326 10327
10328 10329 10330
10331
$19.00 $19.00 $19.00 $12.00
$19.00 $6.00
$16.00
$8.50
LASCO DIAMONDS
10332
10333
10335
10334
$8.40
$9.00
$14.00
$15.00
GRIT ITEM PRICE
Thin Edge
Diamond Wheels
1/8” Dia.
1/8” dia ITEM 10338….$15.00
1/4” dia. ITEM 10339…..$17.40
3/8” dia. ITEM 10340…..$22.00
Wheel, Small thin, 6 mm dia., 0.7 mm long
Wheel, Large thin, 10 mm dia., 0.7 mm long
150
150
15018 $6.95
15019 $7.75
Cone, Double, 4 mm dia., 1.5 mm long
Cone, Double, 6 mm dia., 2.5 mm long
150
150
15020 $6.95
15021 $6.95
Wheel, 13 mm dia., 3 mm long
Wheel, 13 mm dia., 4.5 mm long
150
150
15022 $10.50
15023 $12.00
150
150
15024 $6.95
15025 $7.75
Wheel, Round Edge, 13 mm dia., 4.5 mm long
Wheel, Round Edge, 6.3 mm dia., 2.2 mm long
150
150
15026 $13.00
15027 $6.95
Wheel, Round Edge, 10 mm dia., 3 mm long
150
Cone, Double Flat Top, 5 mm dia., 12 mm long 150
Ball, 0.9 mm dia.
150
Ball, 2.5 mm dia.
150
15028 $7.75
15029 $6.95
15030 $6.95
15031 $6.95
Item
10341…..$10.00
Ball, 2.5 mm dia.
Ball, 2.5 mm dia.
400
600
15032 $6.95
15033 $6.95
20 pc, 1/8” shank
Item 10342…..$10.00
Ball, 5 mm dia.
Ball, 5 mm dia.
150
400
15034 $7.75
15035 $7.75
6 pc,1/8” shank
Ball, 5 mm dia.
Cone, Inverted, 2.3 mm dia., 2 mm long
600
150
150
15036 $7.75
15037 $6.95
15038 $6.95
8 pc, 1/8” shank
Item 10353…..$6.00
Cone, Inverted, 5 mm dia., 3 mm long
SAFE END
10345 10337 10336
$22.00 $22.00 $22.00
Economy Diamond Drill Sets
20 pc, 3/32” shank
Item 10352…..$17.00
FOREDOM PLATED DIAMOND
GRIT
Item Price
Ball, 4.3 mm dia.,
120-200 10033 $3.70
Cylinder, Plated Diamond, 4 mm dia., 8 mm long 120-200 10034 $3.70
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 27
FOREDOM CERAMCUT CARVING STONES
CeramCut Blue Stones hold their shape and cutting edge longer than standard abrasive stones while running cool-
Ball
Nose
FLAME
Item # Price
120 grit, 1/8” dia. , 5/16” long, 1/8” shank
10058 $2.95
Ball Nose
Item #
Price
10036
10037
$2.60
$2.60
80 grit, 5/32” dia. , 3/8” long, 3/32” shank 10039 $2.60
10038
$2.60
10054
$2.60
10055
$2.60
10056
$2.60
120 grit, 1/4” dia., 1/8” long, 3/32” shank
10040 $2.60
10064
$2.95
120 grit, 1/8” dia., 1/4” long, 3/32” shank
10041 $2.60
10057 $2.60
INVERTED CONE
CYLINDER
10069
10046
10044
10047
10068
10045
10070
10069
10062
$2.60
$2.60
$2.60
$2.95
$2.60
$2.95
$2.95
$2.60
PEAR / SPHERE
Pear, 120 grit, 3/8” dia., 1/2” long, 1/8”
shank
10063 $2.95
Sphere, 120 grit, 1/8” dia., 1/8” shank
10060 $2.95
10042 $2.60
10059 $2.60
TAPER
Wheel
10067
$2.95
Tapered,120 grit, 1/2” dia. , 1/8” long, 3/32”
shank
10048
$2.60
10066 $2.95
120 grit, 1/8” dia. , 1/2” long, 3/32” shank 10051 $2.60
10061 $2.60
Round Top,120 grit, 1/8” dia., 1/2” long,
10049 $2.60
10066 3/32” shank
Be Prepared for any job with CeramCut Blue Stones Sets!!
8 piece, Blue Stone CeramCut 1/8” shank
Set. Includes 10060, 10061, 10062, 10064,
10065, 10066, 10067 and 10068
Item # 10071…..$22.50
9 piece, Blue Stone CeramCut 3/32” shank
Set. Includes 10036, 10037, 10038, 10039,
10041, 10042, 10043, 10047 and 10052.
Flat
10051
Item # 10053…..$22.50
PINK STONES
3/32” Shank. Coarser
than white and green
stones.
$3.00 EACH
Round Top, 80 grit, 1/8” dia., 1/2” long,
3/32” shank
10050 $2.60
Small Flat,120 grit, 3/32” dia., 3/16” long,
3/32” shank
10052 $2.60
Tapered Cone, 120 grit, 1/8” dia., 1/4”
long, 3/32” shank
10043 $2.60
Tree, 120 grit, 3/8” dia., 3/4” long, 1/8”
shank
10065 $2.95
Length x Dia.
(inches)
Taper, Round Top 10049
Taper, Small Flat 10052
Tapered Tree, 10065
Tapered Cone 10043
.25 x .09
15041
15042
15043
15044
15045
15046
.31 x .12
.09 x .19
.31 x .12
.19 x .12
.19 x .31
.14 x .39
15047
15048
15049
15050
.14 x .50
.50 x .18
Carving Drills:
1/16" shank, Item 10851…. $19.40
3/32" shank, Item 10852…. $19.40
1/8" shank, Item 10853…. $19.40
.12 x .25
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 28
EXTRA FINE WHITE
ABRASIVE STONES
GREEN AND WHITE ABRASIVE STONES
3/32” Shank
3/32” Shank
$1.60 EACH
Ex. Small
Sphere
Small
Sphere
Med.
Sphere
Sm.
Inverted
Taper
Med.
Inverted
Taper
Small
Inverted
Cone
Med.
Inverted
Cone
Tapered
Wheel
Green
10601
10602
10603
10604
10605
10607
10608*
10610
10619
White
10650
10651
10652
10653
10654
10656
N/A
10659
10668
Sm.
Flame
Med.
Flame
Cylinder
1/4 x 1/2
Cylinder
3/16 x 7/32
Tapered
Wheel
5/16 x 1/32
Tapered
Wheel
3/8 x 3/64
10671
10672
10673
10674
Cone
Ex. Sm
Cylinder
Sm.
Cylinder
Med.
Cylinder
Lg.
Sm. Flat
Med.
Cylinder
Top
Flat Top
Taper
Taper
Lg. Flat
Top
Taper
Green
10620
10621
10611
10612
10613*
10614
10616*
10617*
NA
White
10669
10670
10660
01661
10662
10663
NA
NA
10667
FOREDOM BRISTLE DISCS
Bud
5/32 x
7/32
Bud
1/4 x
1/4
Sphere
1/8”
Sphere
13/64”
Taper Taper
1/8 x 1/8 x
9/32 13/32
10675
10676
10677
10678
10679 10680
Inv.
Cone
1/4 x 1/4
Inv.
Cone
3/16 x 5/32
10681
10682
Foredom 3M Radial Bristle Discs
Flexible Sanding! Flexible discs from 3M can be stacked to
make a brush. Abrasive grains embedded in plastic bristles
allow reaching difficult places without harming details. 2”
Discs can also be used with special mounting hubs on
Foredom Angle Grinders. Hubs shown on Page 21.
Flame
1/8
dia. x
7/32
Bristle Disc Sets
3/4 inch Dia., 10 piece Set.
Includes the following:
1 Each: 10165 1/8” Mandrel (M6)
3 Each: 80, 400, 3000 Grit Discs
Item 10164…..$14.70
Replacement Discs
1 inch Dia., 10 piece Assortment Pack with
Mandrel. Includes the following:
1 Each: 10172 (3/32”) Mandrel (M20)
3 Each: 36, 80, 120 Grit Discs
Item 10173…..$19.95
Cylinder Cylinder
5/32 5/64 dia. x
dia. x 1/4
17/64
long
long
10816
Cone Wheel
1/4 3/8 dia.
dia. x x 3/64
11/32
10811 10812
3/4 inch Dia., 38 piece Set.
Includes the following:
1 Each 10165 (1/8”) Mandrel (M6)
1 Each 10176 (3/32”) Mandrel (M1)
6 Each: 80, 220, 400, 1200, 3000, 140000 Grit Discs
Item 10705…..$63.00
$2.30 EACH
Extra Fine (400 Grit)
Green stones are medium grit, white are fine grit.
Items marked with an * are being discontinued—limited supply available.
3/4” Dia.
1/16” Arbor Hole
10817
Wheel
1/4 dia. x
5/64 long
10814
10815
10813
1” Dia.
1/8” Arbor Hole
6 pk
12 pk
6 pk
12 pk
$10.40 $19.70 $13.10 $22.60
Item # Item # Item # Item #
36 (Brown)
50 (Dark Green)
80 (Yellow)
120 (White)
220 (Red)
400 (Blue)
1200 (Pink)
3000 (Peach)
14000 (Light Green)
NA
NA
10023
10707
10709
10166
10712
10167
10715
10168
10169
10170
10171
NA
NA
NA
NA
NA
10818
Cone
5/32 dia.
x 5/32
long
Grit
NA
NA
10706
10708
10710
10711
10713
10714
10716
Cylinder
1/4 dia. x
9/32 long
10717
10718
10719
10720
NA
NA
NA
NA
NA
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
2” Dia.
3/8” Arbor Hole
6 pk
$22.90
Item #
NA
NA
10721
10722
10723
10724
10725
10726
10727
Page 29
POWER SANDING
SATIN FINISHERS
1” Dia., 3/32” Shank
Material Width
$2.40 each
Item #
Fine (Red)
10801
Scotchbrite
5/16”
Scotchbrite
5/16”
Medium (Black)
10803
Scotchbrite
5/16”
Coarse (Brown)
10804
Scotchbrite
3/8”
Fine (Red)
15008
Scotchbrite
3/8”
Medium (Black)
15009
Scotchbrite
3/8”
Coarse (Brown)
15010
Fine Muslin
1/4”
GUGE SANDERS
$2.50 each
Item #
5 pc pkgs
Small, 3/16" x 5 /8" long
180 grit (red)
Large, 3/8" x 1" long
180 grit (red)
Small, 3/16" x 5 /8" long
240 grit (green)
15013
Large, 3/8" x 1" long
240 grit (green)
15014
Mandrels
Item #
Price
15011
Small
10738
$1.80
15012
Large
10733
$1.80
3/4” Dia. Aluminum Oxide Flap Wheels
$8.50 Each
Item #
3/16" wide with 1/8" Shank, Coarse, 60 Grit
3/16" wide with 1/8" Shank, Fine, 120 Grit
3/16" wide with 1/8" Shank, Medium, 80 Grit
3/8" wide with 1/8" Shank, Coarse, 60 Grit
3/8" wide with 1/8" Shank, Fine, 120 Grit
3/8" wide with 1/8" Shank, Medium, 80 Grit
10802
10774
10775
10776
10777
10778
10779
STEEL BURS
TUNGSTEN CARBIDE
1/8” SHANK, 100,000 RPM Max (1/8” dia and
smaller) and 35,000 RPM (1/4” dia.)
TYPE
MINIATURE CARBIDE
3/32” Shank, 100,000 RPM Max
SIZE
Item
Price
Ball
1/8x1/8
10201
$11.40
Ball
1/4x1/4
10202
$16.20
Cone
1/8x5/8
10203
$11.40
Cone
1/4x5/8
10204
$16.20
Cylinder square
3/32x7/16
10205
$11.40
Cylinder square
1/8x9/16
10206
$11.40
Cylinder square
1/4x1/2
10207
$16.20
Cylinder radius
3/32x7/16
10208
$11.40
Cylinder radius
1/8x9/16
10209
$11.40
Taper
SIZE
(mm)
Item
Price
Ball
0.2
10221
$8.00
Ball
0.5
10222
$4.90
Ball
0.7
10223
$4.90
Ball
0.79
10224
$4.90
Ball
1
10225
$4.90
Ball
2.1
10226
$4.90
Ball
2.35
10227
$4.90
1.19x4.37
10228
$4.90
1.6x1.6
10229
$4.90
Cylinder radius
1/4x1/2
10210
$16.20
Inv. Cone
Flame
1/8x1/4
10211
$11.40
Inv. Cone
2.35x1.6
10230
$4.90
Inv. Cone
1/8x3/16
10212
$11.40
Cylinder
1.6x4.37
10231
$4.90
Cylinder cross cut
1.6x4.37
10232
$4.90
Ball Nose
1.19x3.97
10233
$4.90
Inv. Cone
1/4x1/4
10213
$16.20
Oval
1/8x7/32
10214
$11.40
Ball Nose
1.6x3.97
10234
$4.90
Oval
1/4x5/8
10215
$16.20
Tree point
2.35x6.35
10235
$22.00
Tree point
1/8x1/4
10216
$11.40
8 pc Kit
10236
$36.75
10237
$67.20
10238
$34.65
Tree point
1/8x3/8
10217
$11.40
14 pc Kit with Stand
Tree point
1/4x1/2
10218
$16.20
7 pc with Stand
Tree radius
1/8x1/4
10219
$11.40
Tree radius
1/4x1/2
10220
$16.20
HIGH SPEED STEEL CUTTER
1/8” Shank 45,000 RPM
Type
Triangle
SIZE
3/8 dia. x
9/16 lg.
Item
Price
10028
$10.90
$1.50 each
HIGH SPEED
Ball, 1/32" dia.
STEEL FLUTED
ENGRAVNG BURS Ball, 1/16" dia.
Ball, 3/32" dia.
3/32” Shank,
100,000 RPM MAX Inverted Cone, 3/64" dia. X 3/64” lg
Inverted Cone, 3/32" dia. x 5/64" lg
Item
10239
10240
10241
10242
10243
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 30
POWER SANDING
Mounted Brushes
Type Shank Item Price
Mini Soft Sanders
Horse Hair, Stiff, 3/16" Trim, 3/4" dia.
Horse Hair, Soft, 1/4” Trim, 7/8" dia.
Horse Hair, Soft 9/32” Trim, 1" dia.
Brass, 3/16" Trim, 3/4" dia.
Brass, 1/4" Trim, 1/8" dia.
Steel, 3/16" Trim, 3/4" dia.
Steel, 1/4" Trim, 3/16" dia.
Steel, 1/4” Trim,3/16” dia.
Wheel
Wheel
Wheel
End
Cup
Wheel
End
Wheel
End
End
Includes paper template for easy reloading. Max. 3500 rpm.
3/32”
3/32”
3/32”
3/32”
3/32”
3/32”
3/32”
3/32”
3/32”
1/8”
10749 $1.70
10191 $0.75
10193 $0.75
10750
10748
10753
10751
10754
10752
10190
STEEL END
$1.70
$1.90
$2.50
$2.00
$2.50
$2.00
$1.00
Marsh Tapered Sander: 4” Total length, 2” long sanding surface, 1/8” shank.
Developed by Wanda Marsh for those hard to reach places.
Item 15001…..$10.00
Marsh Soft Round 3/8” diameter, 1” long sanding surface, 1/8” shank
Item 15002…..$10.00
Fat Mini Sander: Sometimes Fat is good! Very Soft, 5/8” diameter,
1” long sanding surface, 1/8” shank Item 15003…..$10.00
Micro Sander 3/4” long, 5/16” dia, sanding surface, 3/32” shank
Item 15004…..$11.00
HORSE CUP
HORSE WHEEL
BRASS WHEEL
Grit Dia.
60
3/8”
80
3/8”
120
3/8”
2 ea 1/2”
60
1/2”
80
1/2”
120
1/2”
2 ea 1/2”
60
1/2”
80
1/2”
120
1/2”
2 ea 1/2”
Rubber Drum Mandrels
1/2” Head Length
1/8”
3/32”
Shank
Head Shank
Dia Item # Price Item # Price
1/4”
10769 $3.70 10765
1/4”
10766 $4.00
3/8”
10770 $4.00 10767
$4.00
1/2”
10771 $4.00 10768
$4.60
3/4”
N/A
$3.70
N/A
10772
3M Ceramic Purple Abrasive Band
1/2” long , 10 piece pkg
Dia Grit Item
Price
1/4”
1/4”
1/2”
1/2”
1/2”
1/2”
$3.90
$3.90
$5.35
$5.35
$5.35
$5.35
10780
10781
10024
10025
10026
10027
3M Aluminum Oxide Sanding
Bands 1/2” long , 10 pack pkg
Dia Grit Item
1/4”
1/4”
3/8”
3/8”
1/2”
1/2”
1/2”
1/2”
3/4”
3/4”
80
120
80
120
60
80
120
180
80
120
Length
1”
1”
1”
1”
1”
1”
1”
1”
1 1/2”
1 1/2”
1 1/2”
1 1/2”
Qty
5 pc
5 pc
5 pc
6 pc
5 pc
5 pc
5 pc
6 pc
5 pc
5 pc
5 pc
6 pc
Item
15065
15066
15067
15068
15069
15070
15071
15072
15073
15074
15075
15076
Price
$3.50
$3.50
$3.50
$4.00
$3.50
$3.50
$3.50
$4.00
$3.75
$3.75
$3.75
$4.00
Grit Dia. Length
60
1/4”
1”
80
1/4”
1”
120
1/4”
1”
3 ea 1/2”
1”
60
1/2”
1”
80
1/2”
1”
120
1/2”
1”
2 ea 1/2”
1”
60
1/4” 1 1/2”
80
1/4” 1 1/2”
120
1/4” 1 1/2”
3 ea 1/4” 1 1/2”
Qty Item Price
10 pc 15077 $3.50
10 pc 15078 $3.50
10 pc 15079 $3.50
9 pc 15080 $3.25
10 pc 15081 $3.50
10 pc 15082 $3.50
10 pc 15083 $3.50
9 pc 15084 $3.25
10 pc 15085 $3.75
10 pc 15086 $3.75
10 pc 15087 $3.75
9 pc 15088 $3.50
$4.60
Type
80
120
60
80
120
220
Straight Sanding Rolls
Tapered Sanding Rolls
10782
10783
10786
10787
10189a
10785
10784
10189c
10788
10789
Price
$2.10
$2.10
$2.10
$2.10
$2.80
$2.80
$2.80
$2.80
$3.70
$3.70
Screw and Tapered Mandrels
Use
Shank
Item Price
Screw Fits 1/16” hole, M1
3/4” Bristle Discs
and Thin Saw
Blades
3/32” 10176 $1.30
Screw Fits 1/16" hole, M6
3/4” Bristle Discs
and Thin Saw
Blades
1/8” 10165 $1.90
1” Bristle Discs and
Thin Saw Blades
3/32” 10172 $3.10
1” Bristle Discs and
Thin Saw Blades
1/8” 10728 $1.90
1/8” 10730 $2.40
1/8” 10731 $2.40
1/4” 10760 $3.35
Screw Fits 1/8" hole, 5/16” Head Dia, M14
Screw Fits 1/8" hole, 7/16” Head Dia, M83
Screw Fits 3/8” hole, M-30
Screw Fits 3/8” hole, M-31
Tapered Pilot 1/8” dia x 5/8” long
Tapered Pilot 1/8” dia x 1” long
Tapered Pilot 1/8” dia x 1/2” long
Tapered Pilot 1/8” dia x 1” long
Tapered LH Thread, 1/8” dia arbor, M-7L
We recommend
using mandrels
1/2” shorter than
roll length
Sanding Rolls
Sanding Rolls
Sanding Rolls
Sanding Rolls
Small Guge Sanders
1/4”
1/8”
1/8”
1/4”
1/4”
3/32”
10761
15061
15062
15063
15064
10738
$6.60
$3.50
$3.50
$3.50
$3.50
$1.90
Split Mandrels for Sanding
Style
Slot Length x Slot Width
M21 3/4 x 1/32, M21
M22 3/4 x 1/32, M22 (Large Guge Sanders)
M23 3/4 x 1/32, M23
M24 3/4 x 1/64, M24
M24LG 1/2 x 1/64, M24LG
M26 3/4 x 1/32, M26
Head Dia Shank
1/8"
5/32"
5/32"
3/32"
3/32"
3/16"
3/32"
3/32"
3/32"
3/32"
3/32"
1/8"
10732
10733
10734
10735
10736
10032
$1.90
$1.90
$1.90
$1.30
$1.30
$2.10
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 31
OPTIMA WOODBURNING EQUIPMENT
OPTIMA 1 WOODBURNING UNITS
ITEM NO.
Single Burner. Comes with 1 pen, 1 std cord and 1 pen.
1401
Single Burner. Same as above except Heavy Duty Cord. 1401HD
Dual Burner. Comes with 2 pens, 2 std cords and 2 pen.
1402
Dual Burner. Same as above except 2 Heavy Duty Cords. 1402HD
PRICE
$107.00
$109.00
$149.00
$153.00
1403
$10.00
Heavy Duty Optima Cord
Polish
1404
1405
$12.00
$2.00
FIXED TIP PENS
Large Skew
Small Round
Small Round, Bent
Large Round
Large Round, Bent
Flat Skew
Spear Point
Chisel Point
Round Skew
Burnishing
Writing
Modified Writing (0.040 inch)
Modified Writing (0.030 inch)
Pin Point (Sharp)
Small Skew
Micro Small Skew
Medium Skew
Small Round Skew
Small Round Skew, Micro
Small Skew
Medium Skew
Small Round Skew
Feather Edger
Feather Edger
Small Chisel/Calligraphy
Small Chisel/Calligraphy
Course Hair
Course Hair w/ extra foam
Spear Point Shader, Large
Spear Point Shader, Medium
Spear Point Shader, Small
1/16" Ball, Small
5/64" Ball, Medium
1/10" Ball, Large
1/8" Ball, Extra Large
Gourd Saw Blade
Gourd Saw Blade, Long
1402
1401
ACCESSORIES
Standard Optima 1 Cord
TYPE
ITEM #
PH1
PH2
PH2B
PH3
PH3B
PH4
PH5
PH6
PH7
PH8
PH9
PH9M
PH9MS
PH9PP
PH10
PH10S
PH11
PH12
PH12S
PH13S
PH13M
PH13L
PH14
PH15
PH16
PH16S
PH17
PH17EF*
PH18L
PH18M
PH18S
PH19S
PH19M
PH19L
PH19XL
PH20
PH20L
1471
1472
1472B
1473
1473B
1474
1475
1476
1477
1478
1479
1479M
1479MS
1479PP
1480
1491
1481
1482
1482S
1483S
1483M
1483L
1484
1485
1486
1486S
1487
1492
1488
1488M
1488S
1489S
1489M
1489L
1489XL
1490
1490L
Check out our website for more information!
Price ……. $20.00 each
PH1 PH2 PH2B PH3 PH4 PH5
PH3B
PH9PP
PH6 PH7 PH8 PH9 PH9M
PH9S
PH10 PH11 PH12 PH12S PH13S PH14
PH13M
PH13L
* Same as the 17,
except it has two
foam grips to keep
the heat off your
hand.
PH16 PH17
PH18 PH19S PH19XL PH20L
PH16S PH17EF PH18M
PH20XL
PH18S
White Polishing Compound for tips
ITEM 1405….$2.00
ITEM NO.
PRICE
Optima 2 35K RPM
1406
$285.00
Optima 2 45K RPM
Collet, 1/16"
Collet, 3/32"
Collet, 1/8"
1407
1408
1409
1410
$320.00
$20.00
$20.00
$20.00
Reducer, 1/8" to 3/32"
1411
$20.00
Reducer, 3/32" to 1/16"
Straight Cord
1412
1413
$20.00
$12.00
Coil Cord
1414
$12.00
OPTIMA 2 MICRO MOTOR TOOLS
POWER CARVING
Check out
our website
for more
information!
1406
PH15
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 32
COLWOOD FIXED TIP PENS AND REPLACEABLE TIPS
Check out our website for more information!
DESCRIPTION
Large Round, 1/4”
Large Point, 1/4”
Large Point, Round Heel, 1/4”
Writing, 0.076”
Micro C Writing, 0.03”
Needle Point
Small Round, 3/16”
Spade, 1/4”
Long E, 3/32”
Spear, 3/16”
Small Point, 3/16”
Small Point, Round Heel, 3/16”
Heavy Point, 3/16”
Heavy Point, Round Heel, 3/16”
Tight Round, 1/8”
Mini J, Tight Round
Small Point, 5/32”
Small Point, Round Heel, 5/32”
Shading, (Bent) 3/16”
Spoon Shader, 3/16”
Primary Short, 1/8”
Micro, 3/32”
Long M, 3/32”
Mico Rounded, 3/32”
Square, 3/32”
Quill Tip
Fish Scale, Small, 1/8”
Fish Scale, Medium, 3/16”
Fish Scale, Large 1/4”
Fish Scale, Extra Large 3/8”
Small Calligraphy
Large Calligraphy
Large Square Shader, 1/4”
Circle, 0.071”
Circle, 0.100”
Circle, 0.189”
Circle, 0.240”
Ball Tip #1, 0.0394”
Ball Tip #2, 0.0625”
Ball Tip #3, 0.0938”
Double Round, 3/16”
Double Point, 3/16”
Bob Guge
TYPE
A
B
BR
C
MC
N
D
E
LE
F
G
GR
H
HR
J
MJ
K
KR
S
SP
PS
M
LM
MR
SQ
QT
FSS
FSM
FSL
FSXL
C1
C2
LSS
C071
C100
C189
C240
BT1
BT2
BT3
DA
DG
GUGE
FIXED
TIP
ITEM #
PRICE
TIP
ITEM #
PRICE
1501
1502
1502R
1503
1503M
1503N
1504
1505
1518
1506
1507
1507R
1508
1508R
1509
1509M
1510
1510R
1511
1511P
1512
1514
1517
1514R
1516
1518Q
1541
1542
1543
1543L
1541C
1543C
1543S
1544
1545
1546
1547
1548B1
1548B2
1548B3
1501D
1507D
1502G
$13.95
$13.95
$14.95
$13.95
$17.95
$18.95
$13.95
$13.95
$13.95
$13.95
$13.95
$14.95
$13.95
$14.95
$13.95
$13.95
$13.95
$13.95
$13.95
$17.95
$13.95
$13.95
$13.95
$14.95
$13.95
$17.95
$16.95
$16.95
$16.95
$19.95
$13.95
$13.95
$14.95
$18.95
$18.95
$18.95
$18.95
$19.95
$19.95
$19.95
$19.95
$20.95
$17.95
1521
1522
1522R
1523
1523M
1523N
1524
1525
1538
1526
1527
1527R
1528
1528R
1529
1529M
1530
1530R
1531
1531P
1532
1534
1537
1534R
1536
1538Q
1591
1592
1593
1593L
1591C
1593C
1593S
1594
1595
1596
1597
1598B1
1598B2
1598B3
1521D
1527D
1522G
$7.95
$7.95
$8.95
$7.95
$13.95
$14.95
$7.95
$7.95
$7.95
$7.95
$7.95
$8.95
$7.95
$8.95
$7.95
$7.95
$7.95
$8.95
$7.95
$13.95
$7.95
$7.95
$7.95
$8.95
$7.95
$13.95
$13.95
$13.95
$13.95
$17.95
$7.95
$7.95
$8.95
$14.95
$14.95
$14.95
$14.95
$15.95
$15.95
$15.95
$14.95
$17.95
$11.95
REPLACABLE
A
B
D
H
BR
E
LE
J
PS
GR,HR
KR
LM
C1
S
MR
SQ
C2
C071 C100 C189 C240
BT1 BT2 BT3
Replaceable Tip Handle
M
N
G
K
FSS FSM FSL
LSS
MC
F
MJ
SP
QT
C
DA
DG
Guge
Item No. 1550…. $15.95 each
Cork Grip
Item No. 1551…. $1.25 each
Foam Grip
Item No. 1553…. $1.00 each
Extra Thick Cork Grip
Item No. 1552…. $1.75 each
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 33
COLWOOD WOODBURNING UNITS, KITS, AND ACCESSORIES
ITEM
NO.
UNITS
Cub
(Great for beginners!)
Cub w/HD Cord
1565
1565H
$63.75
$65.75
1566
$75.75
Detailer (Best Seller!)
Detailer w/HD Cord
PRICE Check out our website for more information!
1566H
$77.75
Super Pro II (Most Versatile!)
1567
$109.00
Super Pro II with 2 UF Cords
1567A
$109.00
Galaxy (Steady Power!)
1568
$190.00
Olympiad with Hot Knife & UF Cord (Most Powerful!)
1569
$187.00
Craft Burner
1571
$15.99
Tip Package (19tips)
1572
$15.95
EZ Tip Puller
1555
$5.25
Handpiece Clip
1576
$1.00
Ultra Flex Cord
Heavy Duty Cord (16 awg)
High Power Cord (14 awg)
Detail Master Adapter Cord
Detail Master HD Adapter Cord
Adapter Cord (male x female)
Razortip (Nibsburner) Adapter (male to male)
Plastic Carrying Case and Storage Box
Plastic Storage Box
Wood Carrying Case
1556
1557
1558
1559
1560
1561
1562
1563
1554
1564
$12.50
$14.75
$16.75
$16.25
$18.25
$16.25
$7.00
$28.50
$7.75
$44.95
1568
ACCESSORIES
1576
1555
KITS
Cub w/ replaceable tips
Cub w/ fixed tips
Detailer w/ replaceable tips
Detailer w/ fixed tips
Super Pro w/ replaceable tips
Super Pro w/ fixed tips
Galaxy w/ replaceable tips
Galaxy w/ fixed tips
1556, 1557
1558
1566
1565
1567
1569
1571
1572
1554
1563
1564
1559, 1560
1562
STANDARD
PACKAGE *
ITEM NO.
PRICE
DELUXE
PACKAGE **
ITEM NO.
PRICE
1565SP
1565SPF
1566SP
1566SPF
1567SP
1567SPF
1568SP
1568SPF
$153.20
$162.00
$165.20
$174.00
$214.25
$207.25
$279.25
$288.25
1565DP
1565DPF
1566DP
1566DPF
1567DP
1567DPF
1568DP
1568DPF
$209.15
$239.00
$220.45
$251.00
$284.50
$269.65
$334.70
$365.00
1565SP
1566DPF
1567SP
1568SPF
* Standard Package comes with plastic case and 5 tips
** Deluxe Package comes with wooden box and 9 tips
Binocular Magnifiers
Saral Wax Free
Transfer Paper
Sally’s Artist
Transfer Paper
Item No. 1574…. $11.75 each
Item No. 1573…. $16.50 each
Graphite Paper, 18”x24”
Item No. 1575…. $3.95 each
1.8x, 2.3x, 3.7x, and 4.8x Lenses
Fold down lens and pivoting loop
Item No. 910…. $21.00
1.75x, 2.25x, 2.75x Lenses
Item No. 1570…. $24.95
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 34
GLASS BIRD AND FISH EYES
CRYSTAL GLASS EYES
COLORED GLASS EYES
European crystal glass eyes attached to a wire. Clear eyes may be
painted on the back to obtain different colors.
CLEAR
SIZE
(mm)
2
3
4
5
6
7
8
9
10
11
12
14
16
18
ITEM
20001
20003
20005
20007
20009
20011
20013
20015
20017
20019
20021
20023
20025
20027
Pair
$1.10
$1.10
$1.10
$1.10
$1.10
$1.45
$1.45
$1.60
$1.60
$1.75
$1.75
$2.30
$3.05
$3.65
ITEM
20002
20004
20006
20008
20010
20012
20014
20016
20018
20020
20022
20024
20026
20028
FISH EYES
Crystal glass eyes with elongated pupil and attached to a
wire.
AMBER
10 Pak
$10.50
$10.50
$10.50
$10.50
$10.50
$14.00
$14.00
$15.50
$15.50
$17.00
$17.00
$22.50
$30.00
$36.00
ITEM
20029
20031
20033
20035
20037
20039
20041
20043
20045
20049
20051
20053
Pair
ITEM
Not Available (N/A)
$1.10
20030
$1.10
20032
$1.10
20034
$1.10
20036
$1.45
20038
$1.45
20040
$1.60
20042
$1.60
20044
$1.75
20046
Not Available (N/A)
$2.30
20050
$3.05
20052
$3.65
20054
SIZE (mm)
ITEM
PAIR
5
6
8
10
12
14
16
18
20
24
20145
20146
20147
20148
20149
20150
20151
20152
20153
20154
$3.20
$3.20
$3.20
$3.60
$3.95
$4.35
$5.25
$5.85
$6.75
$8.75
High quality, European glass eyes attached to a
wire. Glass enamels applied then fired to the
crystal glass to create a glass-hard fine brilliance.
Clear eyes may be painted on the back to obtain
different colors.
BLACK
10 Pak
$10.50
$10.50
$10.50
$10.50
$14.00
$14.00
$15.50
$15.50
$17.00
$22.50
$30.00
$36.00
ITEM
20055
20057
20059
20061
20063
20065
20067
20069
20071
20073
20075
20077
20079
20081
Pair
$1.10
$1.10
$1.10
$1.10
$1.10
$1.45
$1.45
$1.60
$1.60
$1.75
$1.75
$2.30
$3.05
$3.65
ITEM
20056
20058
20060
20062
20064
20066
20068
20070
20072
20074
20076
20078
20080
20082
10 Pak
$10.50
$10.50
$10.50
$10.50
$10.50
$14.00
$14.00
$15.50
$15.50
$17.00
$17.00
$22.50
$30.00
$36.00
Looking for a different color?
We may have it — contact us!
REFERENCE CHART ON COLOR AND SIZES
Note: We may not carry all eyes listed below
RED
YELLOW
HAZEL
BROWN
ITEM
ITEM
ITEM
ITEM
PAIR
N/A
20099
N/A
20114
NA/
20129
20083
20084
$2.35
$2.35
4
5
6
7
20100
20101
20102
20103
20115
20116
20117
20118
20130
20131
20132
20133
20085
20086
20087
20088
$2.60
$2.80
$2.90
$2.90
8
9
10
11
12
14
20104
20105
20106
20107
20108
20109
20119
20120
20121
20122
20123
20124
20134
20135
20136
20137
20138
20139
20089
20090
20091
20092
20093
20094
$2.95
$3.20
$3.25
$3.35
$3.40
$3.90
16
18
20
22
20110
20111
20112
N/A
20125
20126
20127
20128
N/A
N/A
N/A
N/A
20095
20096
20097
20098
$7.25
$7.25
$8.00
$9.00
SIZE
(mm)
2
3
Carousel Horse Eyes
Horse Size
7-9”
27-30”
Full Size
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
5 mm Brown
18 mm Brown
29 mm Brown
Page 35
CAST METAL BIRD FEET
SONG
Baltimore Oriole
Bluebird
Bluejay
Cardinal
Cedar Waxwing/Titmouse
Chickadee
Crow
Evening Grosbeak
Flicker
Goldfinch
House Finch
Belted Kingfisher
Meadow Lark
Pigeon
Road-Runner, Full size
Mini Roadrunner
Robin/ Brown Thrasher
Sparrow,white throated
White-Breasted Nuthatch
Woodpecker, Downy
Woodpecker, Pileated
Woodpecker,Red-Headed
Wood Thrush
Wren, Carolina
Wren, House
ITEM #
PRICE
WATERFOWL
ITEM #
PRICE
20301
20302
20303
20304
20305
20306
20307
20308
20309
20310
20311
20312
20313
20314
20315
20401
20316
20317
20320
20321
20322
20323
20324
20325
20326
$8.00
$7.00
$10.00
$8.00
$7.00
$7.00
$18.00
$8.00
$9.00
7.00
$7.00
$9.00
$11.00
$10.00
$14.00
$10.00
$10.00
$8.00
$7.00
$7.00
$13.00
$9.00
$8.00
$7.00
$7.00
Bufflehead
Canvasback
Green Wing Teal,standing
Green Wing Teal,floating
Mallard
Ultra-MiniDuck,I (9/16x7/16x3/8")
Ultra-MiniDuck,II (3/4x1/2x1/2")
Mini-Duck(1-1/4x1x1")
Mini-Goose(1-1/2x1-1/2x1-3/8")
Pintail
Widgeon
Wood Duck, standing
Wood Duck, floating
20356
20357
20358
20359
20360
20361
20362
20363
20364
20365
20366
20367
20368
$15.00
$20.00
$12.00
$12.00
$18.00
$7.00
$7.00
$8.00
$10.00
$16.00
$14.00
$14.00
$14.00
TWO PART FEET
GAME BIRDS
BIRDS OF PREY
ITEM #
PRICE
Falcon, Peregrine
20327
$19.00
Hawk,Broad-winged
20328
$15.00
Hawk, Cooper
20329
$18.00
Hawk, Red Tailed
20330
$21.00
Hawk, Sharp Shinned
20331
$13.00
Hawk,Sparrow(Kestral)
20332
$10.00
Saw-whet Owl
20333
$9.00
Screech Owl
20334
$9.00
20345
$18.00
SHOREBIRDS
Green Heron(Crouching)
Green Heron (Standing)
20402
$18.00
Herring Gull
20346
$18.00
Bobwhite Quail
Chukar
Dove, Mourning
Dove,White Winged
Gambel's Quail/ Scaled Quail
Grouse
20335
20336
20337
20338
20339
20340
$10.00
$12.00
$10.00
$10.00
$10.00
$12.00
Killdeer
20347
$10.00
Knot/ Least Sandpiper
Mini-Pelican (1-1/4 x 1-1/4 x 111/16)
20348
$9.00
20349
$10.00
Plover, Black Bellied
20350
$10.00
Semipalmated Plover
20403
$9.00
Pheasant
Snipe/ Woodcock
20341
20343
$19.00
$10.00
Ring-Billed Gull
20351
$14.00
Sora Rail
20352
$11.00
Spotted Sandpiper
Willet
Yellowleg, Lesser
20353
20354
20355
$8.00
$14.00
$12.00
These feet are designed to offer a "universal" foot for songbirds based on size of bird.
Goldfinch, Small Chickdee
Sparrow, Titmouse, Wren, Large Chickadee, Nuthatch, Cedar Waxwing
Cardinal, Robin, Catbird, Mockingbird, Small Jay
Warblers
Bluebird, Oriole, Gray Catbird, Northern Shrike, Loggerhead Shrike,
Kingbird, Grosbeak
FOOT
AND LEG,
PAIR
SIZE
PART #
1
$4.00
20369
Thrush, Blue Jay, Bohemian Waxwing, Cactus Wren
20370
20371
20372
PAIR
$3.00
PART #
20375
LEG ONLY,
PAIR
$1.00
PART#
20381
$3.00
$3.00
$3.00
20376
20377
20378
$1.00
$1.00
$1.00
20382
20383
20384
FOOT ONLY,
2
3
4
$4.00
$4.00
$4.00
5
$4.00
20373
$3.00
20379
$1.00
20385
6
$4.00
20374
$3.00
20380
$1.00
20386
TOES ONLY
Bluebird
20391
$3.00
Red Breasted Nuthatch,
20396
$3.00
Miscellaneous Cast Items
Cardinal
20392
$3.00
Blue Jay
20397
$5.00
California or Gambel Quail Top Knot
20387
$4.00
Chickadee
20393
$3.00
Sparrow Hawk
20398
$5.00
Mountain Quail Top Knot
20388
$4.00
Downy Woodpecker
20394
$3.00
Robin
20399
$5.00
Double Mallard Tail Curls (1-3/4 x 7/8 in.)
20389
$6.00
House Wren
20395
$3.00
Red Bellied Woodpecker
20400
$5.00
Mallard curl-small
20390
$3.50
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 36
ADHESIVES AND FILLERS
Zap a Gap, Medium CA+
Quickwood
Hand-kneadable, fast-setting polymer compound for
permanent repairs to wood.
Fills gaps. 1 oz. Item No. 1200…. $8.00
Zap a Gap, Super Thin CA
Super-thin penetrating formula. 1 oz.
Item No. 1201 …. $8.00
3 1/2" (1 oz) Item 1027… $4.50
7" (2 oz)
Item 1026 … $6.75
Z-Ends
Blue/Yellow Epoxy Tape, Kneadatite®
Extender tips allow smaller drops of glue to be
placed in hard-to-reach areas. Ten tips.
9" Strip, Item No. 1103 .…. $3.50
36" Roll, Item No. 1104……$12.50
Item No. 1205 …. $4.20
Z-Ends
5 Minute Z-Poxy Syringe
Premium two part epoxy adhesive that
dries clear. 1 oz.
Super Thick Formula, 3 gram tube.
Item No. 1208 …. $2.00
Item No. 1204 …. $5.20
Zap Zip Kicker
Accelerates Super Glue cure time.
Spray, 2 oz.
Item 1202.…$7.00
Pump Sprayer, 2 oz. Item 1206…$7.00
Refill for Pump Sprayer, 8 oz. Item 1207…$12.00
Zap Z-7 Debonder
Softens cured glue so it can be easily removed from
fingers and other surfaces. 1 oz.
Item No. 1203 …. $4.60
MISCELLANEOUS SUPPLIES
Non-Slip Pad
Holds relief carvings in place while carving.
12" square
Item No. 1004 …. $1.00
Teekay Sealer
Used by world champion waterfowl
carvers.
16 oz. Item 1209 …….$15.00
32 oz. Item 1210 ..……$28.00
Minwax Dark Paste Wax
Specially formulated for dark surfaces
Item No. 1007 …….$11.00
Mini Wire Brush Set
1 each: brass, stainless, and nylon.
Item No. 1229 …. $2.50
No-Crack Hand Cream, Day Use
A non-greasy hand cream that smooths the skin.
4 oz. Unscented
4 oz. Scented
Item No. 1062.. .. $4.00
Item No. 1115.. .. $4.00
16 oz. Unscented Item No. 1063.. .. $10.75
16 oz. Scented
Item No. 1116.. .. $10.75
Stipling Brush
7/16" diameter round. 7 long.
Item No. 1025 …. $1.00
6 LED Headlight, Energizer
6 Hi-Power LED's to help you see your
carving better in poor lighting
conditions or anytime when extra light
is required. Runs up to 50 hours on 1
set of batteries. Comfort-Fit
Headband. 3AAA Batteries Included.
No-Crack Hand Cream, Night Use
For extra dry hands. Scented.
4 oz. Item No. 1064.. .. $6.00
16 oz. Item No. 1117.. .. $14.75
No-Crack Hand Cream, All Purpose
Extra Hand Care in one cream. Use day or night.
Scented.
4 oz. Item No. 1118.. .. $5.00
16 oz. Item No. 1119.. .. $11.50
Item No. 1069.. .. $20.00
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 37
MEASURING AND WORKHOLDING DEVICES
Rulers
Transparent and flexible. Has
both inch and metric graduations.
Outside Calipers:
4” Item 1016 …….. $3.50
6” Item 1017 ……... $4.50
8” Item 1067……..…$5.50
Inside Calipers:
4” Item No. 1224 …. $3.50
6” Item No. 1225 …. $4.50
8” Item No. 1226 …. $5.50
6 inch
Item No. 1005
Price: $0.75
6” Plastic Vernier Calipers
Graduated in mm and inches
12 inch
Item No. 1006
Price: $1.25
Item 1238….$3.00
Pointed Dividers:
4” Item No. 1222 …. $3.50
6” Item No. 1068 …. $4.50
8” Item No. 1223 …. $5.50
5” Vernier Calipers
Graduated in mm and inches
Item 1228….$5.00
CARVING SCREWS
Two Sizes Item # Price
6-3/4”
1715 $60.00
9”
1716 $70.00
PANAVISE WORKHOLDING DEVICES
Ideal for holding larger carvings in place. Refer to our website for more information.
STANDARD BASE LOW PROFILE BASE
HEAVY DUTY BASE
• .625” diameter shaft
• Recommended for working on heavier parts.
• Supports weights up to 75 lbs. at 45°.
• Accepts any 1” diameter shaft to a depth of 1.7”.
• .625” diameter shaft
HEAVY DUTY HEAD
• Four “universal” slots to easily attach work.
• Flat head is 3” x 6”. 1” diameter shaft
STANDARD HEAD
BENCH CLAMP
• Clamps to anything up to 3.4375” thick.
• Throat depth from center of clamping screw: 2.3125”.
• Can be used with Standard or Heavy Duty Bases
DESCRIPTION
ITEM # PRICE
1705
1710
Bench Clamp
1701
$50.00
Standard Base
1712
$30.00
Low Profile Base
1702
$30.00
Standard Head
1703
$25.00
Standard Base and Head, (2 Piece)
1713
$50.00
Standard Base, Head, and Clamp (3 Piece)
1714
$95.00
Low Profile Base and Standard Head, (2 Piece)
1704
$50.00
Low Profile Base, Standard Head, and Clamp (3 Piece)
1705
$95.00
Heavy Duty Base
1706
$45.00 STANDARD VISE HEAD
Heavy Duty Fixturing Head
1707
$25.00 • Nylon jaws are 2.5” wide and open
• Six slots and six 0.25” bolt holes.
• Flat surface is 5.375” in diameter.
Heavy Duty Base and Head (2 Piece)
Heavy Duty Base, Head, Clamp, Adapter Plate (4 Pc)
Standard Vise Head
1709
1710
1711
2.25”.
$66.00 • Height: 4.25”.
$115.00 • Weight: 1.50 lbs.
$35.00
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 38
BASSWOOD RELIEF CARVING BOARDS, BLOCKS, AND OVALS
We carry a large supply of basswood blocks and plaques for relief carving, chip carving, and
woodburning. All wood blanks are of the highest quality. If we wouldn’t use it, we wouldn’t expect you to use it either. Given sizes are actuals except for 3/4 inch boards, which can range in
thickness from 3/4 to 7/8 inch. We prefer to use 1" thick or greater for relief carving, whereas
3/4" boards are great for woodburning or other projects. Unless otherwise specified the grain
always runs in the long direction. Inquire for availability and prices on items not shown here.
BOARDS
5" x 5" x 3/4"
6" x 6" x 3/4"
6" x 7" x 3/4"
6" x 7" x 1"
8" x 10" x 3/4"
8" x 10" x 1"
9" x 12" x 3/4"
9" x 12" x 1"
11" x 12" x 3/4"
11" x 12" x 1"
11" x 14" x 3/4"
11" x 14" x 1"
12" x 16" x 3/4"
12" x 16" x 1"
14" x 14" x 3/4"
14" x 14" x 1"
14" x 14" x 1-1/2"
14" x 24" x 3/4"
16" x 20" x 3/4"
16" x 20" x 1-1/2"
18" x 24" x 3/4"
24" x 30" x 3/4"
9" x 17" x 2"
THIN STOCK
ITEM
ITEM
PRICE
$1.50
$2.00
$2.25
$2.50
$4.00
$5.00
$5.00
$7.00
$7.00
$10.00
$9.00
$12.00
$12.00
$15.00
$12.00
$15.00
$20.00
$22.00
$26.00
$30.00
$32.00
$35.00
$20.00
PRICE
5008
5022
5009
5010
5018
5023
5030
5031
$1.50
$2.75
$2.75
$2.00
$2.50
$6.00
$5.00
$7.00
5028
5011
5012
5019
5013
5020
5017
5021
5024
5001
5025
5002
5029
5003
5004
5005
5026
5006
5027
5007
5014
5015
5016
(1/2” thick and less)
4" x 6" x 1/2"
4" x 12" x 3/8"
4" x 12" x 1/2"
5" x 7" x 1/2"
6" x 8" x1/2"
8" x 10" x 1/8"
8" x 10" x 3/8"
9" x 12" x 3/8"
VARIETY PACKAGES
10 x 7 x 4-3/4” Box
24 pcs Total, 5 lbs
12 x 12 x 6” Box
Random Pieces, 2” thick or
less, 10 lbs
ITEM
ROUNDS AND OVALS
STRAIGHT EDGE
7" x 11" x 1"
Oval
8-1/2" x 10" x 1"
Oval
9" x 13" x 1"
Oval
12" x 15" x 1"
Oval
14" x 18" x 1"
Oval
12" x 1-1/4"
Round
1/2” ROUNDED EDGE
12" x 15" x 1"
Oval
14" x 18" x 1"
Oval
ITEM
PRICE
5201
5202
5203
5204
5206
5211
$8.00
$9.00
$10.00
$20.00
$25.00
$13.00
5309
5310
$30.00
$35.00
1/2” ROUNDED EDGE
WITH 1/8” DEEP STEP
7" x 11" x 1"
8-1/2" x 10" x 1"
9" x 13" x 1"
12" x 15" x 1"
14" x 18" x 1/2"
14" x 18" x 1"
16" x 22" x 1"
Oval
Oval
Oval
Oval
Oval
Oval
Oval
STRAIGHT EDGE
1/2" ROUNDED EDGE
5301
5302
5303
5304
5305
5306
5307
$11.00
$12.00
$13.00
$30.00
$14.00
$35.00
$40.00
1/2" ROUNDED EDGE
With 1/8" Deep Step
SMALL OVAL
4" x 6" x 1/2" thick. Ideal for
caricature bases or small reliefs.
Item 5308…. $4.00
5361
PRICE
$20.00
5562
$20.00
BARK WOOD
ITEM
PRICE
12 x 6 x 1/2”
12 x 10 x 1"
16 x 12 x 1"
5353
5351
5352
$6.00
$10.00
$12.00
BLOCKS
3/4" x 3/4" x 5"
1" x 1" x 6"
1" x 1" x 12"
1-1/2" x 1-1/2" x 3"
1-1/2" x 1-1/2" x 6"
1-1/2" x 1-1/2" x 12"
2" x 2" x 6"
2" x 2" x 12"
2" x 4" x 6"
2" x 4" x 12"
2-1/4" x 2-1/4" x 12"
2-1/2” x 2-1/2” x 12”
3" x 3" x 6"
3" x 3" x 12"
3-1/2" x 3-1/2" x 12"
4" x 4" x 6"
4" x 4" x 12"
ITEM
5101
5102
5116
5108
5107
5103
5109
5104
5112
5113
5114
5119
5110
5105
5115
5111
5106
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
PRICE
$.50
$.75
$1.50
$.75
$1.25
$2.50
$1.50
$3.00
$2.75
$5.50
$3.50
$4.50
$3.25
$6.50
$8.50
$5.50
$11.00
Page 39
BASSWOOD BOXES
Clear basswood boxes sanded smooth for relief carving, chip carving, woodburning, or painting. Items 1 through 22 have brass
hinges which can be removed for carving. Items 23 through 25 have removable dowel hinge pins and feature lock-miter joints.
Wood thickness varies between 3/8” and 1/2” on these boxes. Refer to our internet store for more details.
OUTSIDE DIMENSIONS, INCHES
ITEM
NUMBER
Large Round Top Jewelry with Tray
12 x 7-3/4 x 5-3/8
7-3/8 x 5-1/2 x 5-1/4
5701
5702
$67.00
Small Round Top Jewelry with Tray
10 x 7 x 4-1/4
5703
$34.00
Slant Top Double Recipe
12-1/2 x 5 x 6-3/4
5704
$42.00
Single Recipe
6-1/4 x 5 x 4-1/2
5705
$16.00
11-1/2 x 4-3/4 x 4-1/2
9 x 5 x 3-1/8 **
5706
5707
$26.00
6-1/4 x 4-1/4 x 2-1/2 **
5708
$20.00
5-3/4 x 3-1/2 x 2-1/8 **
5709
$18.00
8-3/4 x 6 x 4
5710
$24.00
Large Hexagon
5-1/2 sides x 3-3/4
5711
$20.00
Small Hexagon
4-1/2 sides x 3-3/4
5712
$14.00
Rectangle Box
10 x 4 x 3-1/2
5713
$20.00
Rectangle Box
12 x 3 x 3
5714
$20.00
Rectangle Box
7x5x3
5715
$18.00
Rectangle Box with Round Edge
6x4x3
5716
$16.00
8-1/4 x 5-1/2 x 3
5717
$20.00
Rectangle Box with Round Edge
7 x 3-1/2 x 3
5718
$16.00
Earring Box
4 x 3 x 2-3/4
5719
$12.00
6-1/2 x 4-1/2 x 1-1/2
8x5x4
5720
$14.00
5725
$25.00
5726
$29.00
5728
$35.00
5729
$40.00
5731
$32.00
5735
$12.00
5736
$8.00
DESCRIPTION
Rectangle with Round Edge
Flat Top Double Recipe
Large Chippendale
Medium Chippendale
Small Chippendale
Octagon with Round Edge
Rectangle Box
Card Box (2 Deck)
Small Box with 1” thick lid
Small Box with 1” thick lid with
Tray
8x5x4
10 x 7 x 4
Medium Box with 1” thick lid
Medium Box with 1” thick lid with
Tray
Large Recipe Card Box, Holds 4 x
6 cards.
Decorative Feet. Can be used on
any box where length or width is
greater than 5-1/2. Set of 4.
Bun Feet. Can be used on most
any box. Set of 4.
10 x 7 x 4
8-1/2 x 6 x 5-1/2 tall
3/8” thick x 1” high x 23/4” long
3/4" high x 1 - 1/2" diameter. Feet require a 1/4"
dia. x 3/8" deep hole.
PRICE
$42.00
5702
5703
5701
$24.00
5704
5705
5706
5710
5707, 5708, 5709
5711
5712
5714
5713
5715
5716
5718
5719
5717
5720
** Represent outside box dimensions
LOCK-MITER JOINTS
5725
5726
REMOVABLE
DOWEL HINGE
PINS
5736
5729
5728
5731
5735
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 40
BASSWOOD PLATES
Clear basswood plates sanded smooth for relief carving, chip carving, woodburning, or painting.
Larger sizes available. Inquire for price and availability.
SIZE
STYLE /DESCRIPTION
A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
OUTER DIA,
(INCHES)
CENTER
(INCHES)
ITEM
NUMBER
PRICE
6
4.00
6001
$7.00
8
5.25
6002
$8.00
RIM
SCOOP
OUTSIDE BEADED RIM
INSIDE BEADED RIM
BEADED FLAT
DOUBLE BEADED RIM
PLAIN EDGE FLAT
BEADED SCOOP
PLAIN EDGE SCOOP
DOUBLE BEADED
NARROW RIM
10
6.50
6003
$10.00
12
8.00
6004
$12.00
14
9.00
6005
$15.00
6
6006
$7.00
8
6007
$8.00
10
6008
$10.00
12
6009
$12.00
14
6010
$15.00
8
5.00
6011
$10.00
10
6.50
6012
$12.00
12
8.00
6013
$13.00
14
9.00
6014
$16.00
10
5.75
6015
$12.00
12
7.25
6016
$14.00
14
8.00
6017
$17.00
8
6018
$9.00
10
6019
$11.00
12
6020
$13.00
14
6021
$16.00
8
5.25
6022
$13.00
10
6.10
6023
$14.00
12
7.75
6024
$16.00
14
9.50
6025
$18.00
6
6026
$7.00
8
6027
$8.00
10
6028
$10.00
12
6029
$12.00
14
6030
$15.00
6
6031
$9.00
8
6032
$10.00
10
6033
$11.00
12
6034
$14.00
14
6035
$16.00
6
6036
$7.00
8
6037
$8.00
10
6038
$10.00
12
6039
$12.00
14
6040
$15.00
12
9.25
6041
$17.00
14
11.50
6042
$20.00
A
G
B
C
H
D
E
I
F
J
QUARTZ CLOCK MOVEMENTS
These quartz movements make clock making a
snap–no clock building expertise is required.
Suitable for use on most plates (sample shown.)
Operates on one "AA" battery (sold separately)
Shaft diameter: 5/16"
Case size: 2 7/32"H x 2 7/32"W x 5/8"D
Specify hour and minute hand style,
(Types A thru F available)
3/4” Max Dial thickness, 1-3/16” Total Shaft Length,
Item No. 1019 ….. $5.00
1/2” Max Dial thickness, 15/16” Total Shaft Length,
Item No. 1020 ….. $5.00
Minute Hand Length
A
B
C
D
E
F
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
6-1/4”
7”
5-1/2”
2-13/16”
3-5/16”
2-1/2”
Page 41
BASSWOOD PLATES
SIZE
STYLE /DESCRIPTION
K.
L.
M.
N.
O.
P.
Q.
R.
S.
T.
U.
V.
SCALLOPED RIM
SCALLOPED BEADED RIM
SCALLOPED BEADED
NARROW RIM
SCALLOPED FLAT
SCALLOPED SCOOP
SCALLOPED BEADED
SQUARE
SCALLOPED SQUARE
BEADED SQUARE
SQUARE
SCALLOPED SCOOPED
OVAL
SCALLOPED OVAL FLAT
(For Relief)
SCALLOPED BEADED
SCOOPED OVAL
Outer Dia,
(inches)
CENTER
(inches)
ITEM
NUMBER
PRICE
6
4.00
6051
$8.00
8
5.25
6052
$10.00
10
6.50
6053
$13.00
12
8.00
6054
$15.00
14
9.00
6055
$18.00
10
5.75
6056
$15.00
12
7.25
6057
$17.00
14
8.00
6058
$20.00
10
6.50
6059
$15.00
12
8.25
6060
$17.00
14
10.25
6061
$20.00
6
6062
$8.00
8
6063
$10.00
10
6064
$13.00
12
6065
$15.00
14
6066
$18.00
8
6067
$10.00
10
6068
$13.00
12
6069
$15.00
14
6070
$18.00
5.75
6071
$14.00
12
7.25
6072
$16.00
14
12.40
6073
$19.00
10
6.50
6074
$12.00
12
8.00
6075
$14.00
14
9.00
6076
$17.00
10
5.75
6077
$14.00
12
7.25
6078
$16.00
14
8.00
6079
$19.00
10
6.50
6080
$12.00
12
8.00
6081
$14.00
14
9.00
6082
$17.00
12
6083
$15.00
14
6084
$17.00
14
6085
$20.00
10
12
6.25
6086
$18.00
14
7.75
6087
$20.00
K
P
M
Q
T
L
N
R
U
O
S
V
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 42
BASSWOOD PLATES
SIZE
STYLE /DESCRIPTION
W.
PETAL
X.
SCALLOPED HEART
Y.
BB.
(Outer Dia),
(inches)
CENTER
(inches)
ITEM
NUMBER
PRICE
12
7.25
6091
$15.00
CANDLE DISH
12-SIDED
CC.
8-SIDED
DD.
OUTSIDE BEADED
CANDLE DISH
8
5.00
6092
$12.00
12
7.00
6093
$16.00
14
8.00
6094
$19.00
6
3.00
6095
$7.00
10
3.75
6096
$15.00
12
4.00
6097
$17.00
10
7.25
6098
$14.00
12
9.25
6099
$17.00
14
11.00
6100
$20.00
12
5.25
6101
$15.00
14
7.00
6102
$18.00
8
3.00
6103
$9.00
10
3.00
6104
$11.00
BB
W
X
CC
Y 6”
Y 10” and 12”
DD
BASSWOOD AND BUTTERNUT EGGS
Basswood unless otherwise noted. Eggs with pedestals are attached. Volume
discounts on orders of 12 or more of any one type.
STYLE
1
2
2
10
10
3
DESCRIPTION
Pigeon
Hen
Hen, Butternut
Hen Egg on Pedestal
Hen Egg on Pedestal-Butternut
Goose
7
Goose-Butternut
Goose Egg on Pedestal
Goose Egg on Pedestal—Butternut
Turkey
Turkey Egg on Wide Pedestal
Turkey Egg on Narrow Pedestal
Ostrich
Ostrich Egg on Pedestal
8
Dinosaur
3
10
10
4
6
9
5
ITEM
NUMBER
PRICE
1 3/8” Wide x 2” Tall
5501
2” Wide x 2 3/4” Tall
5502
5520
5514
$0.75
$3.00
$3.25
$3.25
$3.50
$4.50
SIZE, INCHES
5521
2 1/2” Wide x 3 1/2” Tall
5503
2 1/2” Wide x 3 1/2” Tall
5522
2 1/2” Wide x 4 1/8” Tall
5510
2 1/2” Wide x 4 1/8” Tall
5523
2 3/4” Wide x 4 1/2” Tall
5504
2 3/4” Wide x 5 1/2” Tall
5506
2 3/4” Wide x 5 1/4” Tall
5509
3 5/8” Wide x 5” Tall
5505
3 5/8” Wide x 5 1/2” Tall
5507
$5.00
$4.75
$5.25
$9.00
$9.50
$9.50
$10.00
$10.50
5” Wide x 7” Tall
5508
$20.00
1 thru 5, 8
6
7,9,10
Split Turkey Eggs!
4 quarters, Item 5517………..… $11.00
4 quarters, with 3 hinges and clasp….Item 5519….$15.00
2 quarters and 1 half, Item 5518…..$11.00
Carved Santa Egg by Ken Kohl, Alden, NY
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 43
WOOD PROJECT ITEMS
STYLE
71
DESCRIPTION
SIZE, INCHES
Cookie Sleigh *
ITEM
NUMBER PRICE
17 x 9 x 5-1/2
5601
$26.00
73
Bread Board
11 x 7-1/2 x 3/4
Overall length 16-3/8
5603
$11.00
76
Small Cross
5-1/2 x 3-3/4 x 1/2
5608
$4.00
77
Medium Cross
7-1/4 x 5 x 1/2
5609
$8.00
78
Celtic Cross
Large Cross
Candle Holder
8 x 5-1/4 x 1/2
5610
$10.00
11 x 7 x 1/2
5628
$8.00
Square Handle
Diamond Handle
Round Handle
5620
5636
5637
$8.25
$8.25
$8.25
Picture Frame, Horizontal
9x7
5632
$7.50
Picture Frame, Vertical
7x9
5633
$7.50
4 dia. x 3/8
5611
$2.00
3 x 3 x 1/4
5613
$1.25
4 x 2-1/2 x 1/4
5614
$1.25
6 x 5 x 3/8
5612
$5.00
2 3/4 x 2 3/4
5634
$1.25
3 x 3 x 1/4
5635
1.25
8 dia. x 1-3/4 high
5605
$17.00
93
Can be used alone or with a plate.
Shown with 6” candle holder (not
included.) All 2-1/2” Tall x2” x 3-1/2”
JJ
82
Round Ornament Blank
Square Ornament Blank
83
Diamond Ornament Blank
84
8-Pointed Star Ornament Blank
85
Octagon Ornament Blank
81
Clipped Diamond Blank
91
Square Bowl, Large
92
Dished Bowl (1.5” Deep)
8 diameter
5616
$13.00
92
10 diameter
5617
$17.00
92
12 diameter
5618
$21.00
92
14 diameter
5623
$23.00
EE
Clock Plate **
10 diameter
5615
$21.00
GG
Pedestal Plate *
12 diameter
5619
$22.00
HH
Pedestal Bowl *
12 diameter
5622
$26.00
91
ALL BASSWOOD UNLESS
OTHERWISE NOTED
71
5620
73
5636
5637
76
JJ
Grain runs
lengthwise
on frames
77
78
81
93
82
83
84
85
* Some assembly required
** Requires 1 “AA” battery, not included
5635
92
GG
HH
EE
BOOKSTANDS
Ideal for using while cooking, at the computer, or for holding your woodcarving how-to books.
Suitable for chip carving, woodburning, relief carving, or painting. 1-1/2" wide bottom lip. Two
plexiglas clips hold book in place. Back is 3/4" thick. Stand folds flat for storage. Four slots in
the back allow bookstand to be placed in four positions.
Basswood, 9 x 12, Unfinished: Item 5627 ……...$50.00
Basswood, 12 x 16, Unfinished: Item 5624 …... $50.00
Butternut, 9 x 12, Unfinished: Item 5629 …...… $50.00
Butternut, 12 x 16, Unfinished: Item 5630……..$50.00
Black Walnut, 9 x 12, Unfinished: Item 5631…..$75.00
Black Walnut, 12 x 16, Unfinished: Item 5625….$75.00
Black Walnut, 12 x 16, Finished: Item 5626……...$80.00
Basswood
Butternut
Black Walnut
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 44
WOOD PROJECTS
All blanks are basswood unless otherwise noted. All blanks are supplied with finished piece photos. Corks not included
with bottlestopper blanks.
DESCRIPTION
FINSHED SIZE, INCHES
Cowboy Boot (1/2” dia. opening)
2 - 1/2” tall x 1 - 3/4” x 1”
Cowboy Boot on Post Bottlestopper
5 - 1/4” tall x 3” x 1 - 1/8”
Moccassin
4” x 2” x 1 - 1/2” tall
Merry X-Moose, (antlers included)
7” tall x 1 - 1/2” x 4”
Squatting Moose Bottlestopper,
(antlers included)
6” tall x 1 - 1/2” x 4”
Antlers, 1 Pair
2” x 2” x 1/2”
Bell (suited for relief)
5” tall x 4 x 1 - 1/2”
Christmas Bells Relief
5” x 5” x 1/2”
Dog Relief, Type 1
3-1/2” x 3-1/2” x 1/2”
Dog Relief, Type 2
4” x 3-1/4” x 1/2”
Dog Relief, Type 3
4-1/2” x 4-1/2” x 1/2”
Feather Pin Blanks, Set of 6, comes Length varies 2 to 3-1/2”, 1/4”
with 6 lapel pins
thick
Cowboy Bottlestopper
5” tall x 3-1/2” x 3-1/2”
Civil War Solider Bottlestopper
4” tall x 2-1/4” wide x 2-1/2”
Base- makes a great substitute for a
bottle. Usable on cowboy project.
6” tall x 4” x 3”
ITEM
NUMBER
PRICE
5402
$3.00
5403
$4.00
$4.00
$5.00
5404
5405
5406
5414
5411
5407
5408
5410
5412
$5.00
$3.00
$3.00
$4.00
$3.00
$3.00
$3.00
5402
5404
5403
5411
7025
$8.00
$5.00
$3.00
7015
$10.00
5413
5409
5413
5414
5407
5406
5408
5405
5410
5409
5412
Corks for Bottlestoppers, 1/4" dowel, Cork:
7/8" Dia. Large End, 11/16" Small End, 1-1/8" tall
7015
Item No. 1010…... $1.25 each
7025
Big Red Basswood Pencils
for carving
3/8" dia. x 7-1/2" long
$.85 cents each
10 for $7.50
50 for $32.50
100 for $55.00
Item# 5415
Item# 5416
Item# 5417
Item# 5418
Giant Yellow Pencil
A big pencil for even
bigger ideas!
13-1/2" long, Pine
Item 5419….$6.00
Whittling Pencils Book
Randy True , 2012, 32 Pages, 8.5" X 11",
Saddlestitch Booklet
Item: 9781565237513
$12.99
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 45
BANDSAWED SPOON BLANKS FOR CARVING
Bowls are semifinished. All spoons are supplied with finished piece photo. Spoon and handle thicknesses are noted in chart.
Basswood or Butternut.
OVERALL
SPOON
HANDLE
LENGTH,
THICKNESS THICKNESS ITEM PRICE
DESCRIPTION
WOOD
INCHES
3/4"
9.5"
1/2"
5801
$7.50
Scallop
Basswood
3/4"
9.5"
1/2"
5851
$9.00
Scallop
Butternut
3/4"
3/4"
10"
5802
$7.50
Calla Lily
Basswood
3/4"
3/4"
10"
5852
$9.00
Calla Lily
Butternut
3/4"
3/4"
11"
5803
$13.00
Spiral
Basswood
11"
3/4"
3/4"
5853
$15.00
Spiral
Butternut
5804
3/4"
1/2"
8.5"
5804
$9.00
Celtic Knotwork, Small
Basswood
5809
5854
8.5"
1/2"
3/4"
5854
$13.00
Celtic Knotwork, Small
Butternut
5803
5859
5805
3/4"
3/4"
10"
5805
$12.00
Celtic Knotwork, Large
Basswood
5853
5855
10"
3/4"
3/4"
5855
$14.00
Celtic Knotwork, Large
Butternut
Finished
Pieces Carved by
3/4"
5806
$7.50
Oak Leaves
Basswood
3/8"
9.25"
Betsy Elswit, Ithaca, NY
3/4"
5856
$10.00
Oak Leaves
Butternut
9.25"
3/8"
3/4"
5807
$7.50
Swan
Basswood
3/4"
10"
3/4"
5857
$10.00
Swan
Butternut
10"
3/4"
3/4"
5808
$9.00
Family Tree
Basswood
1/2"
10"
3/4"
5858
$11.00
Family Tree
Butternut
10"
1/2"
3/4"
5809
$9.00
Music
Basswood
3/8"
8.25"
3/4"
5859
$11.00
Music
Butternut
8.25"
3/8"
3/4"
5810
$10.00
Christmas
Basswood
1/2"
9.5"
3/4"
5860
$12.00
Christmas
Butternut
9.5"
1/2"
3/4"
5811
$10.00
Cross and Flame
Basswood
1/2"
9.25"
3/4"
5861
$12.00
Cross and Flame
Butternut
9.25"
1/2"
5801 5802 5806
1"
5812
$9.00
Ball-in-a-cage
Basswood
1"
12"
5851 5852 5856
1"
5862
$11.00
Ball-in-a-cage
Butternut
12"
1"
1/2"
5813
$7.50
Single Chain
Basswood
3/4"
10"
1/2"
5863
$10.00
Single Chain
Butternut
10"
3/4"
1/2"
5814
$14.00
Double Chain
Basswood
3/4"
10"
1/2"
5864
$18.00
Double Chain
Butternut
3/4"
10"
3/4"
5815
$9.00
Dogwood
Basswood
1/2"
11”
3/4"
5865
$11.00
Dogwood
Butternut
11"
1/2"
3/4"
5816
$7.50
Double Dogwood
Basswood
1/2"
9.25"
3/4"
5866
$10.00
Double Dogwood
Butternut
9.25"
1/2"
3/4"
5817
$9.00
Gothic
Basswood
3/4"
9.5"
5807 5808 5812
3/4"
5867
$11.00
Gothic
Butternut
9.5"
3/4"
5857 5858 5862
3/4"
5818
$12.00
Rosebuds
Basswood
3/8"
8.5"
3/4"
5868
$14.00
Rosebuds
Butternut
3/8"
8.5"
3/4"
5819
$9.00
Workshop
Basswood
3/8"
8"
3/4"
5869
$10.00
Workshop
Butternut
3/8"
8"
3/4"
5820
$17.00
Large Double Heart
Basswood
3/8"
9.5"
3/4"
5870
$19.00
Large Double Heart
Butternut
3/8"
9.5"
3/4"
5821
$9.00
Sunflower
Basswood
11"
1/2"
3/4"
5871
$10.00
Sunflower
Butternut
11"
1/2"
3/4"
5822
$9.00
Dove with Olive Leaves
Basswood
11"
1/2"
3/4"
5872
$10.00
Dove with Olive Leaves
Butternut
11"
1/2"
5821
5871
5815
5865
Finished Pieces Carved by
Bob Chaffee, Wellsville, NY
5811
5861
5813
5863
5814
5864
5816
5866
5817
5867
5818
5868
5819
5869
5820
5870
5810 5822
5860 5872
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 46
BASSWOOD ROUGHOUTS: RELIEF
All roughouts are supplied with patterns and finished piece photos. Additional items included with each roughout are
noted in the description for that item and by the color coded symbols.
C
Color Code Key
Green: Includes step-by-step carving photos.
P
Yellow: Includes step-by-step painting photos.
C
P
Blue: Includes step-by-step written carving instructions
Red: Includes step-by-step written painting instructions
P
Wolf Relief
14” x 18” x 1” Oval
Item 7023…. $45.00
Monhegan Lighthouse
11” x 14” x 1”
Item 7001. $35.00
P
P
Cellar Scene
14” x 14” x 1”
Item 7003…. $35.00
Jewel Mill
14” x 14” x 1”
Item 7002…. $35.00
C
P
C
Menhaden Steamer
14” x 18” x 1” Oval
Item 7007…. $40.00
P
Dog with Dish Relief
9” x 12” x 2”
Item 7022…. $22.00
Winter Lighthouse
14” x 18” x 1” Oval
Item 7016…. $40.00
Smethport Mill
14” x 14” x 1”
Item 7004…. $35.00
Indiana Barn
14” x 14” x 1.5”
Item 7044…. $45.00
Stone Lighthouse
14” x 18” x 1” Oval
Item 7006…. $40.00
PATTERNS
Refer to the internet store for a complete listing or inquire about our Pattern Listing Supplement.
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 47
BASSWOOD ROUGHOUTS: RELIEF
All roughouts are supplied with patterns and finished piece photos. Additional items included with each roughout are
noted in the description for that item and by the color coded symbols. See page 44 for color coded symbols key.
P
C
C
P
C
C
C
C
P
P
Cowgirl Relief
8-1/2” x 11” X 2”
Item 7029…..$25.00
Amish Man Relief
17” x 12” x 2”
Specify Barn or Horse
Item 7008 …. $40.00
Pirate Relief (Small)
11” x 8-1/2” x 2”
Item 7027…..$21.00
Pirate Relief (Large)
12 x 16 x 2”
Item 7021…..$45.00
C
P
Flash of Insight
14” x 14” x 1”
Item 7028…..$35.00
Golfer Relief
12” x 10” x 2”
Three club heads provided
Item 7009 …. $30.00
Native American Mask
14” x 10” x 4”
Basswood, Item 7030…. $70.00
Butternut, Item 7045…..$100.00
Native American
Woman
14” x 18” x 1” Oval
Item 7005…..$40.00
Wolf on Moon
7” Dia x 3/4”
Item 7042…. $12.00
Wolf Moon
14” x 18” x 1” Oval
Item 7038…..$40.00
Wolf Moon-Partial
(see 7038 above)
11” x 12” x 1”
Item 7043…..$21.00
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 48
BASSWOOD ROUGHOUTS: IN- THE- ROUND
All roughouts are supplied with finished piece photos. Corks not included with bottlestopper blanks. Additional items
included with each roughout are noted in the description for that item and by the color coded symbols. See page 44 for
color coded symbols key.
Head
C
C
P
Body
Howling Wolf
12” x 8” x 6”
Item 7010 …. $65.00
NATIVE AMERICAN
BUST
Stalking Wolf
7” x 6” x 4”
Item 7031 …. $40.00
5.5" x 2.5" x 2.5"
Item 8950 $10.00
Treasure Hunter
Head and Body Set
12” tall x 9” wide x 4”
Item 7039 …. $75.00
Head Only
4 1/2” tall x 3” wide x 3”
Item 7040 …. $20.00
Body Only
Item 7041 …. $60.00
Dentist Body
Cowgirl Bottlestopper
5” x 3” x 3”
Item 7032 …. $15.00
Twisted Golfer
9” x 7” x 2”
Item 7011 …. $20.00
Patient Body
Pirate Bust
7” tall x 5-3/4” x 4-1/2”
Item 7020 …. $22.00
Head
Head
Head
Torso
Torso
Body
Dentist and Patient
Heads and Bodies Set
9” Overall height
Item 7037 …. $75.00
C
Cowboy with Lasso
Bottlestopper
Head, Torso, and Cork
11” x 4” x 3”
Item 7012 …. $35.00
Head Only
5” tall x 3-1/2” x 3-1/2”
Item 7013 …. $20.00
Torso Only
7” tall x 4” x 3”
Item 7014 …. $16.00
Pirate with Flintlock
Civil War Drummer
Bottlestopper
Head, Body, and
Drumstick Set
Head, Torso, and Cork
7” tall x 6” x 4”
Item 7017 …. $21.00 Item 7024 …. $25.00
Head Only (Bandsawed) Head Only (Bandsawed)
5-1/2” tall x 3” x 3”
4” tall x 2-1/4” wide x 2-1/2”
Item 7018 …. $5.00
Item 7025 …. $3.00
Torso Only
4” tall x 6” x 4”
Item 7019 …. $16.00
Torso Only,
Item 7026 …. $23.00
Dentist Body
7” x 7” x 4”
Item 7033 …. $40.00
Dentist Head (Cutout)
Item 7034 …. $3.00
Patient Body
6” Tall x 8” x 4”
Item 7035 …. $40.00
Patient Head (Cutout)
Item 7036…..$3.00
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 49
ROSS OAR BASSWOOD ROUGHOUTS
Roughouts are supplied with finished piece photos. Dimensions shown are finished piece sizes. Blanks for add - ons (such
as staffs) are not included. Instructions for carving many of these roughouts are shown in Ross Oar’s books.
OLD DOG
3" x 3" x 3"
Item 8002 …. $8.00
LAST PENNY/
CIVIL WAR CHARLIE
9.5" x 4" x 3.5"
Item 8003 …. $23.00
TRADITIONAL SANTA CLAUS
DOZING SANTA/ MOUNTAIN SANTA
10" x 4" x 4"
Item 8039 …. $24.00
6.5" x 3" x 3"
Item 8068 …. $15.50
THREE - IN - ONE SANTA
6" x 3" x 3"
Item 8062 …. $13.50
OLD WORLD SANTA
5" x 2" x 2"
Item 8055 …. $10.50
WINKING SANTA HEAD
FATHER CHRISTMAS
FOLK SANTA
11" x 4" x 3.5"
7" x 3" x 2"
Item 8066 …. $24.00 Item 8053 …. $14.00
SANTA HOLDING BIRD
5” x 2” x 2”
7.5" x 4.5" x 4.25"
Item 8703 …. $10.00 Item 8075 …. $30.00
MOUNTAIN MAN
(FRONTIER BILL)
13" x 4" x 4"
Item 8928 …. $30.00
SANT NICK
7" x 3" x 4"
Item 8072 …. $15.50
CANDLE SANTA
11" x 4" x 4"
Item 8923 …. $24.00
HORSE (TROTTER)
10.5" x 7" x 2.5"
Item 8935 …. $30.00
Instructions for carving many of
these roughouts are shown in Ross
Oar’s books! See the Books
Department for available books.
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 50
ROSS OAR BASSWOOD ROUGHOUTS
Roughouts are supplied with finished piece photos. Dimensions shown are finished piece sizes. Blanks for add - ons (such
as staffs) are not included. Instructions for carving many of these roughouts are shown in Ross Oar’s books.
HIGHLANDER
14” x 5 x 4"
Item 8904 …. $30.00
MILLENIUM SANTA
12" x 7" x 4"
Item 8905 …. $30.00
WOODSMAN SANTA
11.5" x 4" x 4"
Item 8917 …. $30.00
EARLY AMERICAN SANTA
10.75” x 5 x 5”
Item 8918 …. $30.00
SANTA’S REINDEER
7.5" x 7" x 3"
Item 8908 …. $24.00
SANTA IN SLEIGH
(NO RUNNER)
8" x 7" x 4"
Item 8907 …. $30.00
SANTA ON LUGE
(NO RUNNER)
8.5" x 6" x 4”
Item 8914 …. $30.00
SANTA IN ROCKER
RUNNER ACCESSORY
ROCKER ACCESSORY
9" x 4.25" x 4" tall
Item 8906 …. $30.00
7" x 4" x 2" tall
Item 8913 …. $30.00
CAIRN TERRIER
5.5" x 4” x 6"
Item 8080.. $22.00
GNOME
6.5" x 2.5” x 2.5”
Item 8952 … $10.00
NATIVE AMERICAN SCOUT
10.75" x 7" x 4.25"
Item 8925 …. $30.00
WEE SCOTT/SANTA
5" x 2.5" x 2.5"
Item 8922 …. $10.50
(NO ROCKER)
9" x 4.5" x6"
Item 8912 …$30.00
SAILOR
13.5" x 5" x 4"
Item 8915 …. $30.00
PIPER
5.5" x 2.5" x 2.5"
Item 8921.. $10.00
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 51
LEAH GODDARD ANIMAL ROUGHOUTS
All roughouts are basswood and are supplied with finished piece photos.
DESCRIPTION
Note: Includes separate blank
for tail.
ITEM NO
PRICE
Fox, 8” tall x 5” x 4”
7501
$35.00
Rabbit, 5-1/2” tall x 6” x 4”
7502
$25.00
Squirrel, 6” tall x 6” x 3”
7503
$25.00
Raccoon, 6” tall x 5” x 4”
7504
$25.00
Grizzly Bear, 6” tall x 7” x 5”
7505
$35.00
Cougar, 8” tall x 7” x 3”
7506
$35.00
Beaver, 5” tall x 6” x 4”
7507
$30.00
Skunk, 6” tall x 6” x 3”
7508
$25.00
Wolf, 5” tall x 9” x 3”
7509
$35.00
Gorilla, 7” tall x 5” x 5-1/2”
7510
$35.00
Mouse Ornament, 6” tall x 3 1/4” x 2”
7511
$12.00
Kitten Ornament, 4 “ x 2 3/4” x 2 3/4”
7512
$12.00
Buffalo, 6” tall x 3-1/2” x 9”
7513
$35.00
Black Bear, 7” tall x 2-1/2” x 4”
7514
$25.00
Baby Rabbit, 4-1/2” tall x 2-1/2” x 2-3/4”
7515
$12.00
Chipmunk. 4” tall x 3” x 3-1/4”
7516
$20.00
Raccoon in Log, 8” tall x 3-1/2” x 4”
7517
$25.00
Hedgehog, 3-1/2” tall x 2-3/4” x 4”
7518
$15.00
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 52
BOOKS, PERIODICALS, CD’s and DVD’s
Books, Magazines, CD’s, and DVD’s listed here are our favorites. We now carry over 500 titles, including
children’s coloring books which are an excellent source for ideas and sketches. Refer to our on-line internet store
for a complete listing or inquire about our Book Catalog Supplement.
CHIP CARVING
The Complete Guide to Chip Carving, Barton
RELIEF CARVING
DVD-Relief Carving in a Different Light, Bennett
Relief Carving Projects and Techniques, WCI
HUMAN AND FIGURE
Christmas Heirloom Patterns for Woodcarving, Volume II, Oar
Folk & Figure Wood Carving, Oar
Carving Wooden Santa’s, Elves & Gnomes, Oar
Carving the Human Face, 2nd Edition. Phares
ANIMALS
CD-Carving Wolves, Foxes and Coyotes, Hajny
Carving Nature’s Rascals, Wachter, Goddard
CARICATURE
Creating Caricature Heads in Wood and on Paper, Kaisersatt
Carving Caricature Busts, LeClair
MISCELLANEOUS
Carving Boots and Shoes with Larry Green
How to Carve Faces in Driftwood, Enlow
Fan-Carving, Dave and Sally Nye
ITEM #
PRICE
9781402741289
$17.95
1851
9781565235588
$16.95
$19.95
9780964979611
9781565231054
9781565233836
9781565234246
$12.00
$14.95
$16.95
$24.95
0981CD
764319663
$9.99
$15.00
1858
764314971
$24.95
$14.95
9780887403903
9781882475018
1809
$12.95
$8.50
$19.95
STUDY AIDS
Relief Study Aids, 5” x 7” Resin casting designed
and made by Robert Stadtlander showing how to
carve trees in relief. Comes with instructions.
Pine Tree
Deciduous Tree
Item No. 1811 ……. $12.00
Item No. 1812 ……. $12.00
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Page 53
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
ORDER FORM
You may also order on-line at www.stadtlandercarvings.com!
MAIL FORM TO: STADTLANDER WOODCARVINGS
2951 Frost Road, Mantua, OH 44255
Phone: (330) 931-7847 Email: bobstadtlander@roadrunner.com
Date: ____/_____/_____
Bill To:
Ship To (If different than Bill To):
Name
Name
Street
Street
City
City
State
Zip
State
Zip
Tel:
Ohio Customers Only: County:____________ Sales Tax:
______ %
Payment Method (check one):
Check or Money Order
Visa (13 or 16 digits)
MasterCard (16 digits)
Discover (16 digits)
American Express (15 digits)
Card Number
Expiration Date
Cardholder Name (please print)
Cardholder Signature X
SHIPPING/HANDLING/INSURANCE
If your order totals:
Up to $25.00
$25.01 to $100.00
$100.01 to $200.00
Over $200.00 and Outside USA
Item Number
Quantity
g{tÇ~ çÉâ yÉÜ çÉâÜ ÉÜwxÜ4
Invoice #
Knives Only
Add:
$7.00
$7.00
$7.00
Inquire
All Others
Add:
$10.00
$15.00
$20.00
Inquire
Description
_____________________________
_____________________________
• We typically ship USPS Priority Mail.
• Contact us if you need help determining shipping charges.
Size, Color, or
Style
Item Price
Subtotal
OH tax for your county
Shipping/Handling
Total
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Total
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
ORDER FORM
You may also order on-line at www.stadtlandercarvings.com!
MAIL FORM TO: STADTLANDER WOODCARVINGS
2951 Frost Road, Mantua, OH 44255
Phone: (330) 931-7847 Email: bobstadtlander@roadrunner.com
Date: ____/_____/_____
Bill To:
Ship To (If different than Bill To):
Name
Name
Street
Street
City
City
State
Zip
State
Zip
Tel:
Ohio Customers Only: County:____________ Sales Tax:
______ %
Payment Method (check one):
Check or Money Order
Visa (13 or 16 digits)
MasterCard (16 digits)
Discover (16 digits)
American Express (15 digits)
Card Number
Expiration Date
Cardholder Name (please print)
Cardholder Signature X
SHIPPING/HANDLING/INSURANCE
If your order totals:
Up to $25.00
$25.01 to $100.00
$100.01 to $200.00
Over $200.00 and Outside USA
Item Number
Quantity
g{tÇ~ çÉâ yÉÜ çÉâÜ ÉÜwxÜ4
Invoice #
Knives Only
Add:
$7.00
$7.00
$7.00
Inquire
All Others
Add:
$10.00
$15.00
$20.00
Inquire
Description
_____________________________
_____________________________
• We typically ship USPS Priority Mail.
• Contact us if you need help determining shipping charges.
Size, Color, or
Style
Item Price
Subtotal
OH tax for your county
Shipping/Handling
Total
P H ONE : (3 3 0 ) 9 3 1 -7 8 4 7
Total

Stadtlander Woodcarvings

Transcription

Similar documents

Accessories for Hammer Handpieces

2016 YEAR-END - Canadian Woodworker.