Application References Lifts and Escalators

Application References
Lifts
Lifts and Escalators
Site Lifts
Material Hoists
Escalators
product information
information produit
Austria / Autriche:
Freissler-Otis, Wien
Kone Elevators, Austria
Kone Sowitch, Wien
Thyssen, Graz
Belgium / Belgique:
Ascenseurs Electro-Mécaniques, Jambes
Asmolift, Bruxelles
Coopman, Kuurne
Dumon, Brugge
Genorif, Eekloo
Kone Belgium S.A., Awans
Kone, Bruxelles
Kone RCS, Liège
Liften Daelemans, Antwerp
Otis, Bruxelles
Schindler, Bruxelles
Thiery Liften, Antwerp
Thyssen, Antwerp
Thyssen, Bruxelles
Brazil / Brésil:
Kone, Rio de Janeiro
Schindler, Rio de Janeiro
Villares, Rio de Janeiro
Canada:
Ascenseurs Labadie, Montreal
Montgomery-Cone, Toronto
Denmark / Danemark:
Kone, Copenhague
Dubai:
Otis, Dubai
Mitsubishi-Dubai, Dubai
France:
Camus, Poitiers
Kone, Paris
Otis, Paris
Sacamas, Paris
Schindler-RCS, Velizy
Soretex/Thyssen, Paris
Soulier, Paris
Finland / Finlande:
Kone Elevators, Finland
Kone oy Hissit, Helsinki
Germany / Allemagne:
Aufzug- und Fördertechnik, Wuppertal
Bauer Aufzugsfabrik, Augsburg
Beneke Aufzugsbau, Weiden
Elektronic-Lift Thoma, Frankfurt
Hagman, Köln
Haushahn & Co., Stuttgart
Kone Aufzug, Berlin
Kone Sander Aufzug, Berlin
Kone Selzer Aufzüge, Berlin
Kone Aufzug, Bremen
Kone Aufzug, Dresden
Kone Aufzug, Düsseldorf
Kone Aufzug, Frankfurt
Kone Aufzug, Glatzel & Rieser, Koblenz
Kone Aufzug, Hannover
FMC715
TIRAK/TIRFOR
references
elevators,
escalators
références
TIRAK/TIRFOR
ascenseurs,
escaliers roulants
ref.:
rev. no.:
date:
page:
M-043
2
04/98
1/2
Kone Aufzug, Leipzig
Kone Aufzug, Magdeburg
Kone Aufzug, München
Kone Aufzug, Stuttgart
Kone Aufzug, Velimar
Kone Aufzug, Waltersleben
Lippert, Gelsenkirchen
Otis GmbH, Bad Reichenhall
Otis GmbH, Berlin
Otis GmbH, Bremen
Otis GmbH, Dresden
Otis GmbH, Leipzig
Otis GmbH, Stadthagen
PGH-Aufzugdienst, Reichenbach
Schindler, Berlin
Schindler, Frankfurt
Schindler, Hamburg
Thyssen, Hamburg
Thyssen, Holzwickede
Thyssen, Mannheim
Thyssen, Stuttgart-Neuhausen
Usto Aufzuge, Enningerloh
Hong-Kong:
Kone, Marryat & Scott, Hong-Kong
Kone Elevator, Thai Lift Building, Bangkok
Otis, Hong-Kong
Italy / Italie:
Kone Ascensori, Pero
Stigler-Otis, Milano
Schindler, Milano
Lebanon / Liban:
Otis, Beiruth
Luxembourg:
General Technic, Luxembourg
Malaysia / Malaisie:
Hitachi, Kuala Lumpur
Poland / Pologne
Kone Elevators, Poland
Singapour:
Hitachi, Singapour
Otis, Singapour
Schindler, Singapour
Spain / Espagne:
Eguren Kone, Bilbao
Kone Elevadores, Alicante
Kone Elevadores, Andora
Kone Elevadores, Barcelona
Kone Elevadores, Corvado
Kone Elevadores, Madrid
Kone Elevadores, Rigonza S.A., Mallorca
Kone Elevadores, Sabadell
Kone Elevadores, Tenerife
Kone Elevadores, Valencia
Macosa Elevacion, Barcelona
Orenstein & Koppel, Madrid
Orona, San Sebastian
Schindler, Zaragoza
Thyssen Boetticher, Madrid
Zardoya Otis, Madrid
M-242
M-108
M-074
M-073/M-565
M-074
product information
information produit
Sweden / Suède
Kone Hissar AB, Kista
Kone Hissar AB, Frölunda
The Netherlands / Pays-Bas:
Kone Starlift B.V.
Otis Liften Nederland, Amsterdam
Schindler Nederland, Den Haag
V. Swaay & Scheeres, Den Haag
Thyssen Nederland, Alkmaar
Thyssen Nederland, Amsterdam
Turkey / Turquie
Kone Asansör, Istanbul
U.K. / Grande Bretagne:
Express Lifts, Northampton
Kone, Hounslow
Kone, Lifts Ltd., Middlesex
Otis, London
Schindler Lifts, Cheltenham
USA / Etats Unis:
Armour Elevators, Louisville
Otis, Chicago
Otis, New York
FMC715
TIRAK/TIRFOR
references
elevators,
escalators
références
TIRAK/TIRFOR
ascenseurs,
escaliers roulants
ref.:
rev. no.:
date:
page:
M-043
2
04/98
2/2
product
information
installation of lifts
ref.:
M-565
rev. no.:
date:
08/93
page:
1/2
Application: Installation of lifts.
Site: EUROCENTER, Neuss/Germany.
Contractors:
Bast Bauunternehmen, D-Erkrath
Thyssen Aufzüge, D-Stuttgart-Neuhausen
Equipment:
3 compact frames with TIRAK T-1000
and wire rope reelers,
3 MINIFOR powered hoists.
The compact frames, mounted at the top of
the building in the machine rooms, are
used for operating the working platforms
suspended inside the lift shafts.
RO-114
The first phase of the construction covers
the installation of 8 lifts in 2 separate buildings. Height: 46 m, 11 floors.
Equipment supplied by GREIFZUG GmbH,
D-Bergisch Gladbach.
RO-114.2
MC1258
product
information
installation of lifts
ref.:
M-565
rev. no.:
date:
08/93
page:
2/2
The MINIFOR powered hoists, anchored to the compact frames,
are used for lifting and positioning the lift doors.
RO-114.7
RO-114.6
MC1258
product
information
1
installation
of lifts
ref.:
rev. no.:
date:
page:
M-073
1
10/94
1/1
2
3
TIRAK
4
Application: Installation of lifts
Customer: Thyssen-Aufzüge,
Stuttgart-Neuhausen/Germany
Equipment: TIRAK T-1000 hoist on frame
Description of application:
In order to carry out installation work inside the lift shaft,
the working platform, i.e. the lift cabin, is operated by
a TIRAK (2) placed at the top of the shaft.
5
The wire rope is guided by a sheave (1) fixed near the
TIRAK with the end anchored at the top.
A counterweight is suspended by means of a sheave
block (7) to the loopformed.
In this case the use of a BLOCSTOP on an additional
safety wire rope is not necessary, since there is already
the parachute safety device (4) for the elevator.
4
6
7
1 - Slewing guide sheave
5 - Parachute release wire rope
2 - Limit switch
6 - Elevator cabin guide rails
3 - Frame with TIRAK hoist
7 - Reversing sheave
4 - Release mechanism for parachute
with counterweight
RO/66
FMC690
product
information
installation
of lifts
ref.:
rev. no.:
date:
page:
M-240
1
10/94
1/1
Application: Installation of lifts
Customer:
Thinet-Dumez, Jeddah/Saudi-Arabia
Equipment: 1 special ALTA platform 2 x 1.70 m, equipped
with TIRAK T-1000 and automatic BLOCSTOP
BS 15-301 safety device on a separate safety
wire rope.
guide roller
TIRAK T-1000
automatic
BLOCSTOP 15.301
safety wire rope
suspension
wire rope
MC389
product
information
ref.:
rev. no.:
date:
page:
installation
of lifts
suspension wire rope
safety wire rope
TIRAK
automatic BLOCSTOP
stirrup
Application:
Customer:
Activity:
Equipment:
M-108
1
10/94
1/1
Installation of lifts
Schindler, Frankfurt/Germany
Lift manufacturer
Special stirrup with aluminium
platforms fitted with TIRAK hoist and
automatic BLOCSTOP device.
Description of application:
Raising of working platform for installation work in
lift shaft.
The working platform is made of a special 2-meter
high stirrup on which are fitted aluminium platforms
of 3 different widths (0.8 m, 1.2 m and 1.6 m)
depending on the size of the elevator shaft. The
platform is equipped with 8 telescopic guide roller
assemblies.
telescopic
guide roller
PA/93
FMC779
product
information
installation
of lifts
ref.:
rev. no.:
date:
page:
M-074
1
10/94
1/1
Application: Installation of lifts
Customer: a) Schindler, Hamburg/Germany
b) General Technic, Luxembourg
Equipement: TIRAK T-1000 with BLOCSTOP safety device,
mounted on a special stirrup.
Description of application:
Raising of a working platform inside an elevator shaft (up
to 90 m height) for the installation of slides and landing doors.
The platform is equipped with a special stirrup designed for
mounting the TIRAK on the main wire rope and a BLOCSTOP
on the safety wire rope.
The TIRAK is reeved to obtain a capacity of 1 ton for manriding.
guides
suspension
wire rope
safety wire rope
suspension
stirrup
RO/65
TIRAK
BLOCSTOP
level 1
standard
cabine frame
level 2
PA/66.2
FMC691
product
information
lifting
elevator driving mechanism
ref.:
rev. no.:
date:
page:
M-241
1
10/94
1/1
Application: Lifting elevator driving mechanism
Site:
Colonia residential building,
Cologne/Germany
Equipment: 4 hydraulic TIRFOR TU-16H machines,
2 electric-hydraulic power packs
Description of application:
Problem:
The Colonia Building in Cologne is a 45 storey high residential
tower. Four elevator drive mechanisms had to be installed
on the 45th floor. These mechanisms weighing 4.2 tons
each, were raised by a crane up to the 42nd floor and had
to be brought up, from there, to the top floor.
546
Solution:
The problem was solved by using 4 TIRFOR TU-16H units
of 1600 kg capacity each, motorised by hydraulic rams.
These hydraulic TU-16H machines were operated in pair
by means of 2 portable electro-hydraulic power packs. The
speed of each TU-16H could, at all times, be individually
controlled from 0 to 2 meters per minute max. The TIRFOR
were fixed to a ceiling beam above the machine shop floor.
The wire ropes were dropped down through an aperture, to
the 42nd floor where they were attached by means of
shackles to the 4 corners of the driving mechanisms.
The operator then only had to use the control valves to
ensure a precise and gentle lifting of the load.
TIRFOR
TU-16H
electrohydraulic
power pack
45nd floor
44nd floor
43nd floor
42nd floor
546
MC710
product
information
ref.:
rev. no.:
date:
page:
site elevators
Application:
Customer:
Activity:
Site:
Equipment:
M-075
1
10/94
1/1
Personnel hoist
Focant Marble Yard, Franchimont/Belgium
Quarry
Rochefontaine quarry
– 1ALTA-Mono platform 2 m long
– 1 TIRAK T-1000 winch
– 1 BLOCSTOP BS 20.321
– 4 wire ropes 45 m long
– 1 DELTA III special suspension jib
Description of application:
PA/69
Special DELTA III
suspension
access ladder
counterweight
The suspended platform serves to lower personnel to a
work level (depth: 40 meters). Since it travels along a quarry
face slightly inclined to the vertical, it is guided sideways by
2 wire ropes.
To protect personnel against folling rock, a roof has been
fitted on the platform. It is further equipped with a locking
device which allows it to be locked in the high position and
affords the required stability when the personnel leave the
platform.
TOP VIEW
support roller
guide
GUIDE WIRE ROPE SUPPORTING BEAM
suspension and safety wire rope
guide wire rope
stretcher
counterweight
stretcher
FMC692
product
information
emergency
rescue
ref.:
rev. no.:
date:
page:
M-313
1
10/94
1/1
Application: Emergency rescue platform in household waste
disposal plant.
Site:
Household waste disposal plant,
Kassel/Germany
Customer: Steingass & Sohn, Solingen/Germany
Equipment: 1 ALTA mono suspended platform, fitted with
TIRAK T-500 hoist, BLOCSTOP safety device, 2
wire rope reelers and a TIRFOR hand operated
machine.
Description of application:
As the unloading ramp for the refuse lorries is not protected by
a guard rail, it could hapen that a person or even a vehicle could
fall into the dump.
To meet any such eventuality, the management have installed
an emergency rescue platform, suspended from an overhead
monorail system and allowing fast access to the bottom of the
dump.
A stretcher arrangement is fitted under the floor panel of the
cradle to rescue the injured person in case of a serious
accident.
Even in the event of a power failure, the system can still be
operated, using the hand operated TIRFOR suspended cradle
equipment, with which the cradle is also fitted.
Equipment supplied by GRIFZUG GmbH, Bergisch Gladbach.
PA/240
MC833
product
information
site elevators
ref.:
rev. no.:
date:
page:
M-229
1
10/94
1/1
Application: Lift for shafts
Site:
LEP worksite (Electron Positron Accelerator)
built by European CERN Organization at the
French/Swiss border, near Geneva
Customerr: EUROLEP Company
Equipment: 8 suspension systems each fitted with:
– 1 cradle dim. 2.50 x 1.20 m,
capacity 660 kg or 6 people;
– 2 TIRAK T-1000 winches,
capacity 800 kg, speed 18 m/min;
– 2 x 2 BLOCSTOP safety devices.
Description of application:
The suspension systems and the cradle are used as
elevators for the personnel in the different shafts which
have a depth of approx. 100 to 150 m.
Each suspension system consists of 2 suspension lines,
with the TIRAK winches and two overspeed BSO-1000
BLOCSTOP, as well as 2 safety lines, with two
electromagnetic BLOCSTOP. These are controlled by
mercury switches placed on the cradles. All wire ropes are
wound onto motorised reelers.
PA177.4
PA177
MC700
product
information
ref.:
rev. no.:
date:
page:
materials hoist
Application:
Site:
Customer:
Equipment:
M-258
1
12/88
1/1
Materials hoists
Oran University, Algeria
E.R.C.O., Bir El Djir, Oran
– 1 materials hoist TIRALIFT 25 M,
cap. 1400 kg, lifting height 60 m
– 10 materials hoist, as above, but with
lifting height 25 m.
Description of application:
Following an international bid, we secured an
important order for the supply of 11 materials hoists
to be erected on the ORAN University Site in Algeria.
They were used over heights of up to 60 meters for the
supply of internal building materials like sanitary,
plumbing, electrical and flooring goods.
These machines offer an unusual loading surface (6 m x
1.20 m). The platform is lifted by two TIRAK T-1000 M
machines placed on ground level and guided by two
masts.
The controls use micro-processors and have a digital
floor-level display.
PA/195.2
PA/195
FMC/725
PA/195.3
product
information
ref.:
rev. no.:
date:
page:
materials hoist
M-082
1
12/88
1/1
Application: Vertical materials hoist
Customer: "Parc de l'Europe",
Dommeldange/Luxembourg
Site:
Residential building "Parc de l'Europe",
Dommeldange
Equipment: - TIRAK T-820M with wire rope reeler
- 1 wire rope 16 m long
- 2 control panels, 0 level and -8
- 1 vertical tower with platform and guide
pulleys.
Description of application:
TIRAK, reeved, used as winch for a materials hoist, capacity
500 kg, 8 m height of lift, lifting speed 5 m/min. in a residential
building.
TIRAK is placed at top level. The free end of the wire rope
is wound onto a reeler.
control
box
3000
2000
RO/53.1
800
GROUND FLOOR
TIRAK
8000
Wire rope
reeler
RO/53
latice-work
doors
Pit
RO/53.2
FMC/699
800
BASEMENT
product
information
escalators
Application:
Site:
Customer:
554
2 TIRFOR
TU-16H
4th floor
2 anchorage points
ref.:
rev. no.:
date:
page:
M-242
1
11/94
1/1
Installation of 7 escalators,
weight 9 tons,
Department store, Berlin/Germany
OTIS GmbH, Berlin
The installation of this elevators offered a splendid opportunity
for demonstrating the versatility and advantages of the
motorised TIRFOR TU-16H.
The escalators were delivered by special trucks and unloaded
by crane. As each escalator was unloaded, guide wheels were
fitted to it for ease of manoeuverability. The escalator was then
hung by its motorised end at the top from four pulleys, raised
slightly, and tensioned by means of a reeved manually operated
TIRFOR attached to its lower end to guard against excess
loading. In this way the escalator assembly could be gently
moved, in a horizontal position, into the shaft.
Once in the shaft, two motorised TU-16H's were attached to set
the escalator at the right angle and then hoist the whole
structure to a point just higher than its final mountings. It was
then possible to position the escalators precisely, without
changing the rams. This operation was repeated for each of
ascending escalators.
To install the 3 descending escalators in the same shaft, but in
a vertical plane parallel to the first, all that was required was to
move the motorised TU-16H's and snatch blocks to new
position. Once the new anchorage points had been established,
this second part of the operation was carried ou as quickly and
simply as the first.
The operation as a whole was a difficult one, involving precise
timing and co-ordination between the operators. However, by
using motorised TIRFOR TU-16H machines, the total installation time was cut by half, and only two men were required to
operate the hoists. Furthermore, as there was no undue fatigue,
the work schedule was uninterrupted.
Large escalator installers throughout the world use motorised
TIRFOR (see reference list M-043).
2 anchorage points
2 TIRFOR
TU-16H
3rd floor
2nd floor
1st floor
manual TIRFOR
ground floor
(motor) top end
weight: 6 tons
MC711
lower end
weight: 3 tons