a PDF version of the 2007 catalog
Transcription
a PDF version of the 2007 catalog
Customer Driven Distribution 2007 PRODUCT CATALOG 800 444 7223 www.paceintl.com TRIPLETT New !!! About Pace Since 1972 Pace Electronics, Inc. has been your trusted ROCHESTER, MN MINNEAPOLIS, MN PENSACOLA, FL source for RF distribution products and technical support. tel 507 288 1853 fax 507 288 1853 tel 763 246 9620 fax 763 542 9665 tel 850 474 3900 fax 850 474 3964 3582 Technology Dr NW Rochester, MN 55901 2454 Louisiana Ave N Minneapolis, MN 55427 9900-F Palafox Street Pensacola, FL 32534 The New, Improved Model 1101-A Our 2007 catalog conveys a much broader product offering than in past years as well as a new name to better reflect our company, Pace International. With our newly opened office in China and our 3 locations in Minnesota & Florida, Pace International is poised to take the lead distributor role in the burgeoning digital marketplace. Prices and promotions are subject to change without notice. Pace Electronics is not responsible for errors or omissions. Product DMM Customer Driven Distribution is our focus asCompact we integrate technology and distribution to better may vary from product pictured. Certain products may not be available at all warehouse locations. Products may also be subject serve you. As our product and service offerings are larger than our catalog allows, be sure to also © Pace Electronics Inc. All Rights Reserved. to back order. Pace Electronics can discontinue any offers it gives without notice. check out the products on our website at www.paceintl.com Model 1101-A Specifications Pace Mission Statement: DC Voltage 4(200mV to 200V) 0.5% + 2dgt 1(500V) 0.8% + 2dgt AC Voltage 2(200V & 500V) 1.2% +10dgt 2(2000µA to 20mA) 1.0% +2dgt 1(200mA) 1.2% +2dgt 1(10A) 2.0% +5dgt FUNCTIONS DC Current esistance Leading, simplifying and supporting the integration of Rhardware and content solutions within a com- plex communications marketplace. FEATURES 3Year 4(200Ω to 200KΩ) 0.8% +2dgt 1(20MΩ) 1.0% +5dgt Temperature Test (K-type) Continuity ≤ 70Ω Diode Check Warranty (-40° to 302°F) ±1.0% +3dgt (303° to 1832°F) ±1.5% +15dgt ▲ ▲ 3 1/2 Digit, w/ 1999 max. reading Contact a Pace location today and find outTotwhat we can offer your business! al Ranges / Functions ▲ Backlit Display Transistor Check (hFE) ▲ 20 ▲ AC/DC Voltage to 500V ▲ AC/DC Current to 10A ▲ Temperature Test (Probe Included) ▲ Resistance to 20MΩ ▲ Continuity Test ▲ DiodeVendor Check Pace List ▲ Data Hold ▲ Overload Protection ▲ Double Insulated Case ▲ CAT I and II Rated ▲ Red Rubber Boot w/ Stand ▲ Safety Test Leads w/ Screw-on Alligator Clips ▲ Three Year Warranty TRIPLETT Triplett Corporation One Triplett Drive Bluffton, OH 45817 Phone: 800-TRIPLETT Fax: 419-358-7956 www.triplett.com CAT I 600V (IEC 1010-1) CAT II 300V (IEC 1010-1) Ω Ranges 500V AC/DC SAFETY Diode Test 500V AC/DC mA Jack 300mA/250V Fuse 10A Jack Range Selection 00 * 500V AC/DC Continuity Beeper Agency Approval FEATURES 42 $ 230mV DC (500V AC/DC) Fuses Unfused CE IEC 1010-1 (EN 61010-1) on Voltage Ranges Only. See "Overload Protection" above Manual Range Digital Display 3 1/2 Digit, 1999 Count Backlit Display ▲ Data Hold ▲ Auto Polarity ▲ Low Battery Indication PHYSICAL Cat. No. 1101 Overload Protection mV Ranges Voltage Ranges (Except mV) Battery Dimensions (including boot) Weight (including boot) ▲ 1 - 9 Volt 3.1 x 5.4 x 1.6 in. 0.55 lbs. * Price is Suggested U.S. List. All Specifications are PRELIMINARY and are subject to change without notice. Model 1101-A replaces Model 1101 (Catalog Number remains 1101) Tradewind is in the process of refreshing its brand identity. Look for our new logo on upcoming products and promotions! Introduction ABOUT PACE 2 INDEX 4 table of contents Satellite & Terrestrial Recievers Directv MFH-1 L-Band Amps / multi switches Satellite meters 6 7-11 12-13 14 15-16 Dishes / lnbs 17 Off-air antennas 18 Headend Hardline 40-41 Grounding 42-43 Wire Management 44 Wall Plates 45 Surge Protectors 46 Audio / Video Digital Mixers 48 Amplifiers 49-50 iR Control 51-52 Audio / Video cables 53 Television mounts 54 Tools Multi Switches / Modulators 20 Combiners 21 Amplifiers 22 Racks / shelves 23 Character Generators 24 Signal Distribution Hand tools Ladders / dollies 56-59 60 Power Tools 61-64 Bits / blades 65-67 Screws / anchors 67-68 Insulation / concrete 69 Stapling 70 Fiber optic 26-31 Wire fishing Cables 32-33 Sealants 73 Connectos 33-35 Lights 74 Connector tools 36-37 Cleaning Tools 75 76 Splitters 38 Safety Taps 39 Test Equipment 71-72 77-79 AC-Only Power Supply 41 Agile HD Processor 22 Amplifiers Broadband 14 Distribution 22 L-Band Auto Level 12 MFH-1 10 Off-Air 14 Residential 14 Trunk 12 Antennas Off-Air 18 Square Shooter 17 Attenuators Power Passing 11, 39 Audio Mixer/Amplifiers 48, 49, 50 Network Audio Adapter 50 Auger. See Drill Bits Batteries/Chargers 62, 63, 64, 73 Bits & Blades 62, 65, 66, 67, 69 Bolts & Fasteners 67, 68 Bosch 63, 64 Brazing Rods 70 Broadband Video Over CAT5E 51 Cable Audio/Video Patch Cables 53 CAT5E 33 Coax 32, 33 Ground Wire 43 HDMI CL2 Rated Cable 53 Phone Wire 33, 45 Cable/Wire Management Bushings 37 Cable Ties 44 Staples 37, 44 Cable Caddies 60 Caulking Gun 73 Chisels 58, 59 Circular Saw 64 Circular Saws. See Saws Combiners 8, 11, 12, 21 Conduit 73 Connectors Angle 35 BNC 35 Data 44 F-Connectors 33, 34, 35 Hardline 41 RCA 34, 35 Connector Tools Compression 36, 37 F-Connector Removal Tool 59 Hex 36 Radial Crimping 36 RJ 45 36, 37 Cordless Drills/Screwdrivers 61, 62, 63 Demodulators 21 DeWalt 61 Dinky Link 51 Diplexers 38 Dishes 17 Dollies & Straps 60 Drill Bits 65, 66, 67 Drills 61, 62, 63, 64 Dry wall accessories 68, 70 Dust Pan and Brush 75 Electrical Tape 73 Extension Cords 74 Fasteners. See Bolts & Fasteners Fiber Optic 26–31 Chasis 27, 28 Connector/Adapter Cleaning Kit 31 Distribution Diagram 26 Enclosure 30, 31 Fiber Splicer 29 Optical Power Meter 31 Optical Splitter 28 Power Accessories 28 Receivers 27 Splice Trays 30 Transmitters 27 File Set 59 FireStop Spray Foam 73 Fishing. See Wire Fishing Flex Bits. See Drill Bits Foam Spray Insulation 69 FosFlo 70 Frequency Charts 82 Furniture Pad 75 Grounding Products 42, 43 Hammer Drill 61 Hammers 57 HDMI CL2 Rated Cable 53 Headend 13–18, 23–24 Character Generators 24 Hex Key Set 58 Hilti 69 Hitachi 64 IR Controls 50, 51, 52 Jig Saw. See Saws L-Band 13 Ladders 60 Levels 57 Lights 74 LNBs 17 Lock Box 43 Maglite 74 Makita 64 Masonry Flexible Drill Bits. See Drill Bits Measuring Tape 57 Meters Digital Sound Level 50 Inclinometer 16 Optical Power 31 Satellite 15 Test Equipment 77, 78, 79 MFH-1 7, 7–18, 26, 26–46 Mixer/Amplifier 48, 49 Modulators 12, 20, 21 Power Supply 23 Mud Ring Cover 70 Multi Satellite 7, 8, 9, 10, 11 Customer Devices 10 Master Combiner Unit 8 System in a Box 9 Multiswitches 13, 14, 20 Online Shopping Instructions 80 Phone 45 Wall Plates 45 Pipe Cutter 56 Pliers 56 Power Inserters 11, 13 Power Nailer 69 Power Nails 69 Racks & Accessories 23 Receivers 6 Reciprocating Saws. See Saws Rotary Hammer 69 RotoZip 64 Safety 75, 76 Satellite 16 Dishes 17 Saw Blades 62 Saws Circular 61, 63, 64 Hand Saws 56 Jig Saw 63 Reciprocating 61, 63 Screw Drivers 58, 61, 63 Screws 68 Sealants 73 Security Products 43 Sharpie 73 Shoe Covers 75 Shop Vacs 75 Soldering 70, 74, 75 Splitters 1 GHz 38 2 GHz 38 Hardline 40 Wide Band 10 Stacker/Destacker Micro Stacker 12 Staple Guns 70 Staples 44, 70 Strippers 36, 37 Stud Punch Tool 59 Surge Protector 46 Tape Measure 57 Taps 1 GHz 39 2 GHz 39 Directional Couplers 39 Hardline 40 Connectors 41 Directional Couplers 40 Splitters 40 Telephone. See Phone Television Mounts 53, 54 Terminators 34 Terms and Conditions 81 Test Equipment. See Meters Pocket Toner 37 Tone Generators 11 Tool Boxes & Bags 58 Torch 74 Triplett 77 Wall Plates 45 Wire. See Cable Wire Fishing 71, 72 Wrenches 58 SATELLITE & TERRESTRIAL Recievers Directv MFH-1 L-Band Amps / multi switches Satellite meters 6 7-11 12-13 14 15-16 Dishes / lnbs 17 Off-air antennas 18 Satellite & Terrestrial Receivers DIRECTV® Receiver d-11 Call for Pricing 4 Two sets of audio/video outputs DIRECTV® Plus HD DVR hr-20 4 S-Video output Call for Pricing 4 Record one high-definition program while watching another (up to two shows at once) 4 RF in/out connectors 4 Pause and rewind live high-definition TV, use instant replay and watch in slow motion 4 Phone jack connector 4 Interactive TV enabled 4 On-screen Caller-ID 4 1080i picture output resolution formats 4 Dolby® Digital 5.1 Surround Sound Capable DIRECTV® DVR r15 Call for Pricing The DIRECTV® DVR lets you easily and automatically record your favorite shows and watch them on your schedule 4 Digital Recording (up to 70 hrs.) DIRECTV® HD Receiver h20 Call for Pricing 4 Picture clarity up to 1080i picture resolution for crystal-clear, vibrant colors and wider images 4 Dual Tuners (lets you record two things at once) 4 Crisp digital sound 4 Parental Controls 4 Multiple screen formats full screen, stretched, letter box, pillar box and zoom 4 Advanced Technology High-Definition Multimedia Interface (HDMI) 4 Superior connectivity 4 On-Screen caller ID view and log caller ID information provided by your local phone company 800 444 7223 | www.paceintl.com Satellite & Terrestrial multiple satellites + off-air antenna = ONE WIRE inernet 2 DIRECTV® MFH-1 Multi Satellite DIRECTV MFH-1 + 3 1 5 One Wire, Multi-Family Residential Installation 4 6 (To view our fiber optic system design turn to page 26 in Distribution Section.) 7 1. SATELLITE ANTENNA: 7. NAS MASTER STACKER Multiple signals are received into LNB’s and transmitted into the The Master Conversion Unit (MCU) device stacks DIRECTV MFH1 System. satellite bands and terrestrial UHF/VHF band into a single wide- 2. MODEM DISTRIBUTION DATA TERMINATION SYSTEM band signal for MDU distribution. Add an internet connection to the MFH1 System to provide in- 8. NAS ACTIVE ULTRA WIDE BAND SPLITER ternet access to your customers. Splits terrestrial and satellite signals for distribution. 3. PLATINUM SERIES UHF/UV ANTENNA 9. NAS MFH1 MULTI-SATELLITE CUSTOMER DEVICE Add Off-Air or MATV channels into the one wire solution. De-stack and down-convert the DIRECTV® Satellite signals for 4. MULTI-CHANNEL PROGRAMMABLE FILTER AMPLIFIER delivery to the DIRECTV IRD. Balance digital & Analog off-air singals 10. DIRECTV® HD RECEIVER 5. NAS SIX POINT POWER INSERTER NAS Customer Devices can have up to 4 outlets. Simply hook Regulate voltage for powering and locking polarity of LNB's up a DIRECTV® receiver or cable modem to receive TV or in- 6. NAS IN-LINE TRUNK AMPLIFIER ternet. 8 10 9 10 Adjustable Line Amplifiers for boosting the satellite signals 800 444 7223 | www.paceintl.com Satellite & Terrestrial DIRECTV MFH-1 Single Family Residential Installation Active 2-way Ultra Wide Band Converter scu-4p5matw Call for Pricing 4 Only one Master Combiner Unit (MCU) may be required to service a medium size Multi-Dwelling Unit (MDU) property 4 For large High rise and Garden Style MDU properties the MCU can be cascaded 4 MCU supports power supply redundancy with other MCU’s to sustain partial power outage 4 Built-in LED input level indicators 4 Automatic Gain Control (AGC) on each satellite input 4 7 inputs and 7 outputs 800 444 7223 | www.paceintl.com Satellite & Terrestrial DIRECTV MFH-1 MFH-1 System in a Box Single wire distribution system for Multiple Satellites and Multiple Antenna Systems Finally, a turn key RF distribution system that delivers stacked signals onto one wire while remaining small and easy to install. MFH-1 System in a Box NASDISTRO1 Call for Pricing 4 MFH-1 Single wire solution for DIRECTV serves up to 256 DIRECTV receivers (depending on property layout) 4 Small 26" × 26" × 8" foot print 4 Reduced Labor and installation costs. Plug and play! 4 Balances off-air signals for the best viewing experience 4 HDTV, DVR and Internet capable 4 Custom ventilated enclosure protects your signals from prying fingers and signal theft 4 Each system fully tested and certified To learn more and customize your own solution, call our expert sales staff or visit us online. 800 444 7223 | www.paceintl.com Satellite & Terrestrial DIRECTV MFH-1 Satellite Power Amplifier Passive Ultra Wide Band Satellite 8-way Splitter Call for Pricing spa-1u 4 Wide-band frequency response 4 Sloped Gain Compensation 4 Low power consumption 4 6 Inputs: VHF Low+FM / VHF High / VHF-UHF and 3 UHF units split over 10 UHF programmable clusters 4 Each cluster can have 1 to 7 channels bandwidth 4 Easy programming by using one rotary / push button viewed on 2 digits display and LEDs for each cluster and each input 4 Automatic leveling of signal or manual with 30 dB attenuator with 1 dB step for accurate equalization uhfs-4p Call for Pricing uhfs-8p Call for Pricing 4 Passes DC power from each output to input port up to 500 mA Call for Pricing 4 Designed for both digital and analog channels Call for Pricing 4 Wide-band power splitters for VHF/UHF and Satellite bands up to 3550 Mhz Multi Channel Programmable Filter Amplifier Pfa-6600 uhfs-2p 4 High isolation of reflected signals 2-way Wide Band Splitter Call for Pricing SS14-02 4 For splitting terrestrial and satellite signals 2-way for signal distribution 4 500mA DC passing from any output to input 4 Diode steered protection 4 Grounding port provided 4 Frequency range 5 -2150 MHz scd-4p54w 4 Selectable remote power on VHF-UHF inputs MFH1 Multi Satellite Customer Devices lmx-42 lmx-82 sa-6a 10 Call for Pricing Call for Pricing scd-4p52w Call for Pricing 4 (Single In. Dual IRD Outs) in non 72.5º W markets Active Ultra Wide Band Splitter Inline Trunk Amplifier scd-4p5w lmx-2r 2-way, return path Call for Pricing lmx-42r 4 way, return path Call for Pricing lmx-82r 8-way, return path Call for Pricing scd-4p54w 4 (Single In. Quad IRD Outs) in non 72.5º W markets MFH1 Multi Satellite Customer Devices are designed to be installer friendly. They operate with all legacy and new production DIRECTV receivers. They are powered by DIRECTV receiver or with optional external power supply. Other features include: 4 Built-in DIRECTV Multi-switch 4 6 Inputs, 6 Outputs 4 Ultra wide-band active splitters covering VHF/UHF and Satellite bands up to 3550 Mhz 4 Frequency range; 250 - 2150 MHz 4 Supporting Broadband Return Path 4 Low Noise Figure 4 Passes DC power from each output to input port 4 Enables two-way broadband services 4 Wide Dynamic Range 4 Provides high isolation of reflected signals 4 High isolation between outputs 800 444 7223 | www.paceintl.com Call for Pricing Satellite & Terrestrial vr-9615 Power Inserter 12V Call for Pricing VHF+UHF / Satellite Combiner pi-4a 4 - way Call for Pricing pi-6s 6 - way Call for Pricing 4 For powering LNB and active components 4 Low insertion loss (< 1dB) 4 For combining two signals with different frequencies into a common wire 4 Low insertion loss Voltage Block Coupler 4 Frequency range 950–2150 MHz 4 40–2150 MHz frequency range Call for Pricing Power Passing Fixed Attenuators Call for Pricing ssc-1 4 Low insertion loss (< 1dB) 4 For combining two signals with different frequencies into a common wire 4 40–2150 MHz frequency range 4 Low insertion loss 4 For powering LNB and active components Call for Pricing vbc-t Combiner for SAT-C LNB Single Way Power Inserter PI-9602 Call for Pricing std-9501 Pp02a-03 3 dB Call for Pricing pp02a-06 6 dB Call for Pricing pp02a-09 10 dB Call for Pricing pp02a-12 12 dB Call for Pricing pp02a-16 16 dB Call for Pricing pp02a-20 20 dB Call for Pricing 4 Frequency range 5 - 2150 MHz 4 Return loss >20 dB Tone Generator, 22 kHz Call for Pricing TG-9411 VHF+UHF/Satellite Ultra Wide Band Combiner swtd-2 swtd-3 Return Path Call for Pricing 4 To use with satellite equipment without 22 kHz tone in multisatellite applications Call for Pricing 4 Frequency range 250 - 2150 MHz 4 For combining two signals with different frequencies into a common wire 4 Frequency range 950–3550 MHz 4 Low insertion loss 800 444 7223 | www.paceintl.com 11 DIRECTV MFH-1 Voltage Regulator Satellite & Terrestrial L-Band Tradewind™ RF Modulator $ 13.95 pvsm3/4s Tradewind™ Dual satellite IF Trunk Amplifier $ 79.00 tw-4300 The TW-4300 is a dual LNB launch amplifier. It works as equally well in 950 to 1450MHz dual distribution systems as it does in dual wideband (950 to 2150MHz) systems. Single wide-band signals may be split to feed both halves of the amplifier. Each amplifier output can work independently from each other to provide a 30db max gain. Power may enter the amplifier from any “F” port. TW-4300 includes an external DC plug-in supply to power the amp locally. Pass Band: 950-2150MHz Gain: 30dB MIN 950-215MHz Flatness: 0.5dB MAX 950-2150Mz Return Loss (Input): 15dB MIN 950-2150Mz 15dB MIN 950-2150Mz Noise Figure: 8dB MAX 950-2150Mz Input Capability: 92dB uV At 1.45GHz (Output): (1dB Compression) Isolation (between Tradewind™ L-Band Auto Level Amplifier tw-ala-1 $ 99.00 tw-ala-5 $ 99.00 tw-ala-10 $ 99.00 The TW-ALA-1 amplifiers process DBS transponders for distribution over coaxial cable lines. The automatic level control circuitry provides a constant output over a 20 dB input range. The input range also compensates for installation variables such as tap values and cable distances. The output level works well in amplifier cascades. Gain is complemented with 10 dB of slope compensation. Each TW-ALA model includes a power supply. The ON/OFF switch controls the LNB power from RF input port. The LED indicates the LNB to be powered from RF input. Diode steered powering allows the amp to be powered from the power connector or either input or output “F” connector. Designed to convert separate audio and video signals (from a video camera, computer, portable VCR or satellite receiver) into VHF TV signals that you can view on a TV set. Great for TVs without composite inputs. sc-3 sc-4 Tru Spec® Signal Combiners sc-3 $ 7.34 Channel 3 4 Combines two like signals onto channel 3 sc-4 $ 7.34 Channel 4 4 Combines two like signals onto channel 4 Input 35dB MIN Amps) Operating Voltage 12-18VDC Operating Current 220 mA 22KHz diseq blocking high 950-2150MHz Micro Stacker $ 135.00 US575-t 4 Used for stacking 101, 110 and 119 satellites Tradewind™ Digital Audio/Video Modulator mod1 $ 19.95 impedance 4 Microprocessor controlled PLL agile modulator Impedance 75 Ohm 4 20 dBmV minimum output Operating temperature -20° C ~ +50° C Power Adaptor 120VAC/60Hz input 4 Covers CATV channels 65-139 and broadcast Channels 14 to 83 15VDC/400mA output 12 Sonora Dual Receiver D-Stacker Box $ 153.00 d575d 800 444 7223 | www.paceintl.com 4 Front panel mode button for easy selection of TV/CATV channels Satellite & Terrestrial L-Band and Local Distribution Box L-Band Tradewind™ LDB Series Distribution Boxes The Pace LDB Series distribution boxes enable the integration of analog (MATV or Off-Air) with digital satellite (L-band or Stacked DBS) into a single coax cable. ldb8 Call for Pricing ldb12 Call for Pricing ldb16 Call for Pricing ldb24 Call for Pricing ldb8D Dual L-Band Call for Pricing ldb12D Dual L-Band Call for Pricing ldb16D Dual L-Band Call for Pricing ldb24D Dual L-Band Call for Pricing Tradewind LDB Series distribution boxes enable the integration of analog (MATV or Off-Air) with digital satellite (L-band or Stacked DBS) into a single coax cable. All outputs are good for 200 feet over RG6 coax, and a 4-way splitter at the end of the coax run. Analog signal loss is approximately 35 dB including the 4-way splitter at the end of the run. A Dual LDB allows to distribute two separate L-Band signals from the same box. An LDB-24D will have 12 dual outputs which can be split 4 ways each for a total of 48 receivers. Two Dual LDBs can be used side by side to distribute 4 L-Band lines as is the case with 3 phase satellites. 4 15 to 2050 MHz An Automatic DBS Level Controller amplifier allows for a consistent output level over a wide input range. All outputs are good for 200 feet over RG6 coax, and a 4-way splitter at the end of the coax run. Preamplifier is recommended for the off air antennas. Pace LDB Boxes are excellent for apartments, condos, office buildings and other commercial applications to make every outlet DIRECTV ready. They are a convenient, centralized solution to power all your units. Sonora® Destacker d575 $ 70.00 4 Essential for TIVO programming in a stacked environment 4 Allows an older receiver to work with stacked technology Channel Master Power Inserter 8002IFD $ 24.81 8004ifd $ 34.10 4 13 and 18V includes Model 8014IFD Power Supply 4 Stacked DBS and analog input 4 Accommodates a 4-way splitter Tradewind™ Dual Power Inserter P4518 Inputs $ 19.00 4 13/18v or 18/18v switchable Number of Outputs DIRECTV® APPROVED! 8 12 16 24 Stacked DBS LDB8 LDB12 LDB16 LDB24 Dual L-Band LDB8D LDB12D LDB16D LDB24D Zinwell® 3x4 Multiswitch SAM-3402 800 444 7223 | www.paceintl.com $ 10.00 13 Satellite & Terrestrial Amps/Multi Switches DIRECTV® APPROVED! DIRECTV® APPROVED! Zinwell® 6x16 Multi Switch Zinwell® 4x8 Multi Switch $ 43.00 sam-4803 $ 190.00 wb616 4 Wide-band 6x16 Multi-Switch for Ka/Ku Dish Antenna 4 Supports DIRECTV wide-band Ka/Ku dish antenna which has a 250-2150 MHz output capacity 4 Also compatible with all other DIRECTV dish antennas 4 Supports 16 independently-operating satellite receivers or more when cascaded Tradewind™ 5x8 Multi Switch TWI5X8 22Khz tone Tradewind™ Broadband Distribution Amplifier PBIDA-30-860 860 MHZ $ 230.00 The PBIDA-30-860 is a professional quality, broadband, two-way capable, indoor hybrid distribution amplifier. 4 Dual push pull hybrid modules 4 Interstage variable gain and slope controls, which are located on the top of the unit for easy access $ 57.50 4 22 KHz tone 4 Input and output test ports 4 5 inputs and 8 outputs 4 Each LNB can be powered via the multi switch by using power adaptor connected to the multi switch 4 Each satellite receiver connected can select programs either in Vertical or Horizontal polarity 4 13V/18V and 22 KHz ON/OFF DIRECTV® APPROVED! 4 This unit has a large heat sink for superior heat dissipation Pre Amps AP-8700 19 dB UHF/17 dB VHF Pre Amp $ 56.06 AP-2870 Dual Input Pre Amp $ 53.02 AP-3800 Pre Amp 29dB VHF; UHF By-pass $ 35.68 AP-4800 Pre Amp VHF By-pass 28dB UHF $ 54.58 Tru Spec® 15 dB Amplifier AP-8275 Pre Amp 29dB VHF 28dB UHF $ 74.70 ta-15 AP-8780 Pre Amp 17dB VHF 28dB UHF $ 67.07 UHF/VHF $ 13.50 Zinwell® 6x8 Passive Wide Band Multi Switch MA wb68 $ 60.00 TA-36 Designed to interface with 99°/101°/103°/110°/119° DIRECTV satellites. To be used with DIRECTV AT9 Ka/Ku satellite dish for MPEG-4 compression HD compatible receivers. 4 In conjunction with a BBC Module (B Band Convertor Module, Zinwell part # SUP-2400), WB68 supports a DIRECTV Ka/Ku MPEG-4 capable HD satellite receiver Mini Amplifier vsma-10-1000 $ 19.00 4 Compatible with all other DIRECTV satellite receivers (BBC Module not required) vsma-20-1000 $ 29.00 4 Powered by connected satellite receivers 4 Wide band frequency multiswitch: 250-750 Mhz, 950-1450 Mhz, 1650-2150 Mhz 14 Tru Spec® 25 dB & 36 dB Amplifier vsa10/10-1000-2 vsav10-1000-2wz 10dB 1G Amp Active Return $ 33.00 10dB Passive Reverse $ 30.00 800 444 7223 | www.paceintl.com ta-25 UHF/VHF $ 16.75 ta-36 UHF/VHF Amp $ 73.00 Outdoor Transformer ob-3 $ .50 Satellite & Terrestrial Satellite Meters Channel Master® Satellite Signal level Meters $ 56.81 1004IFD sat-buddy sat-buddy2 Dual-buddy SAT Buddy sat-buddy Super Buddy - Satellite Signal Level Meter $ 103.87 1007IFD 4 Rugged Weather-resistant Metal Enclosure $ 679.00 super-buddy $ 165.00 4 Neoprene Case Included 4 ID the satellite by“align-to-lock” or “automatic scan” 4 Strong Internal Rechargeable Battery (Nimh) 4 Positive ID multi-lock algorithm eliminates false positives 4 Bright Led Display , Easy To Read Even In Direct Daylight 4 Field replaceable connectors 4 Audible Tone, Allowing Dish Alignment By Sound 4 Rugged durable aluminum case with rubber shock guards 4 Geo-sensitive “Field Guide” software stores all satellites and transponders per region 4 Controls multi-LNBs/switches with 22kHz/DiSEqC 4 Displays cross-pole value from DIRECWAY modems 4 Audible tone for signal lock and peak 4 Quick charge battery with universal AC or vehicle 12 VDC Includes Carrying Case $ 149.56 The Channel Master 1004IFS, 1007IFD and 1008IFD are intended to aid in the alignment of a satellite dish. They include satellite IF (9502159MHz) amplification and a broadband detector. The detector drives a meter and variable frequency audio tone. The dish is then aligned for maximum meter deflection or highest pitch tone. A gain control allows a wide range of input signal levels. The units are connected to the LNB via a short coaxial cable. The 1004IFD output must be connected to the satellite receiver in order to supply power. The units operate from 11-24 VDC on the coaxial cable. Connection to the receiver is optional with the 1007IFD and 1008IFD but extends battery life between charges. All models allow measurement of voltage on the coaxial cable. The 1007IFD and 1008IFD will also measure LNB current. The 1007IFD and 1008IFD include an internal rechargeable nicad battery pack, carrying strap and a wall plug recharging unit. sat-buddy2 $ 200.00 4 Rugged weather-resistant metal enclosure 4 Easy to use single function front panel buttons 1008IFD SAT Buddy 2 4 Neoprene case included 4 Strong internal rechargeable battery (nimh) 4 Bright led display , easy to read even in direct daylight 4 Audible tone, allowing dish alignment by sound 4 Field replaceable connectors 4 22khz/diseqc tone for multi-LNB switch control Dual Buddy dual-buddy 4 Rugged weather-resistant metal enclosure Satellite Finder Meter $ 12.95 SF-99 4 Works with all brands of satellite dishes and receivers 4 Analog meter display for easier readouts 4 Frequency range: 950Mhz to 2050Mhz 4 LED indicator for left hand (18V) or right hand (13V) polarization 4 Powered by satellite receiver 800 444 7223 | www.paceintl.com $ 275.00 4 Neoprene case included 4 Strong internal rechargeable battery (nimh) 4 Bright led display , easy to read even in direct daylight 4 Audible tone, allowing dish alignment by sound 4 Field replaceable connectors 4 22khz/diseqc tone for multi-LNB switch control 4 DSB (Dual Signal Balance) For Balancing Two Signal Inputs 15 Satellite & Terrestrial Satellite Meters Satellite Meter dg3pro $ 95.00 4 Satellite tracking meter with self-contained battery 4 Includes vehicle cord, wall charger, leather case and one 6' jumper Satellite Signal Meter sat9520 $ 1,195.00 4 LCD display with full text graphics 4 Pitch tone on audio speaker 4 Identifies Satellites 4 22khz/diseqc tone for Controlling LNB's and multiswitches 4 Tunable to individual transponder frequencies Scanning RF Signal Level and CLI Meters dispmax800 4 Standard 950-1450 or stacked 950-2150 MHz $ 1,195.00 4 Strong, fast charge, internal battery able to power multiswitches and high current LNB's 4 Calibrated leakage detector 4 Interfaces to computer for future software upgrades 4 Meets FCC recording requirements using a calibrated dipole 4 Rugged, weather-resistant enclosure with padded case 4 Search mode quickly finds leaks 4 Unique circuitry rejects most false leaks. Audio detects other manufacturers’ tags 4 Audible tone for dish alignment 4 This is Applied's finest satellite meter 4 Ingress analysis: Automatically searches reverse band for ingress 4 Peak hold function catches intermittent problems 4 Digital Channel Measuremen 4 Check average power of digital channels 4 View flatness across the entire channel. Measures QAM and QPSK Inclinometer PVc0maf $ 159.00 The Suunto Tandem is a liquid-filled precision compass and inclinometer in one compact aluminum housing. This instrument is an excellent tool for surveyors, engineers, cartographers, geologists, miners, architects and for anyone who needs to be able to measure directional indications, heights, vertical angles and slopes - with speed and accuracy. 4 Pass Fail installation check 4 Check your entire system or just your favorite channels 4 On screen report summarizes results Satellite Signal Meter birddog 4 Data recordin $ 499.99 4 Rugged Weather-resistant Metal Enclosure 4 Neoprene Case Included 4 Strong Internal Rechargeable Battery (Nimh) 4 Bright Led Display , Easy To Read Even In Direct Daylight 4 Audible Tone, Allowing Dish Alignment By Sound 16 4 One button recording makes documentation easy 4 Automatically performs 24 hour FCC testing 4 Download direct to printer or to a computer Compass with Lanyard 4 Automatic calibration tccpm $ 4.99 4 On board noise source provides precision calibration 4 Durable hand held compass with rotating bezel and lanyard 4 Accuracy is guaranteed over time and temperature at all frequencies and power levels 4 If you don’t have a satellite meter, a good quality compass will help align a satellite dish quickly and easily 800 444 7223 | www.paceintl.com Satellite & Terrestrial DIRECTV® APPROVED! WS-LNB SF2-d3 Stacked LNB $ 107.22 ws-lnb Dual LNB Brace sold separately $ 24.00 wg18acd DIRECTV 5 LNB Ku/Ka Dish Antenna $ 80.00 Au9s Longbrace $ 7.50 Shortbrace for wall mount $ 7.50 dtvlongbrace dtva3brace 4 DIRECTV: 101 4 For MPEG-4 Compression for HD Prog 4 DIRECTV: 99, 101, 103, 110, 119 Winegard® Square Shooter Off Air Antenna Winegard® One Meter Winegard Dish DIRECTV APPROVED! ® $ 15.00 sf2-d3 Winegard® 18" Dish Dual LNB Single Pack $ 76.82 ds-3100 $ 101.50 ss-1000 SS-2000 Amplified $ 120.24 4 Avg. beamwidth: 61° 4 Avg. VSWR across band: 1.3:1 4 Avg. Front to back: 13 dB 4 Maximum width housing: 16" x 16" x 4" Winegard® 3 Phase Multi Sat Dish kt1820blx $ 52.00 4 DIRECTV: 101, 110, 119 DIRECTV® APPROVED! Winegard® 30" Dish With RCA Style Feed ds-2078 $ 38.03 ds-4062 $ 29.49 Residential Non-Pen Roof Mount $ 25.00 CH-mount Tripod 36" International Dish 66e For more info on residential and commercial mounts call or vist us online! $ 80.00 Sat C Kit for 110 degree Satellite $ 24.99 SATC-KIT 4 DIRECTV: 72.5 800 444 7223 | www.paceintl.com TRt36 3 ft. $ 19.95 TRT60 5 ft. $ 36.00 17 Dishes / LNBs DIRECTV® APPROVED! Satellite & Terrestrial Winegard® Platinum Series UHF Antenna Off-Air Antennas hd-9095 Winegard® Platinum Series UHF/VHF Antenna $ 80.89 $ 97.05 hd-7082 Winegard® Platinum Series UHF/VHF Antenna $ 123.36 hd-7084 4 93" Fringe UHF 4 110" Near Fringe Range 4 Winegard® 131" Fringe Range 4 45 Miles UHF 4 35 Miles UHF 50 Miles VHF/FM 4 45 Miles UHF 80 Miles VHF/FM 4 Active Elements: 3 9 4 VHF/UHF 4 Active Elements: 6 8 4 Boom Length: 9 5 “ 4 Active elements: 50 4 UHF Elements: 4 0 4 Turning Radius: 92.75" 4 UHF elements: 32 4 VHF Elements: 2 8 4 Maximum Width: 7 “ 4 VHF elements: 18 4 Boom Length: 131" 4 Vertical Height: 31.75" 4 Boom length: 110.5" 4 Turning Radius: 8 1" 4 Element Diameter: 3/8" 4 Turning radius: 70.6" 4 Maximum Width: 110" 4 Maximum width: 110" 4 Vertical Height: 25.5" 4 Vertical height: 19.3" 4 Element Diameter: 3 / 8 “ 4 Element diameter: 3/8" Metro UHF/VHF Antenna pr-5646 $ 41.12 4 Suburban Range Winegard® FM Antenna pr-6010 20 mi. FM 4 30 Miles UHF 45 Miles VHF/FM 4 Active Elements: 2 4 Active Elements: 25 4 Boom Length: 10" 4 Boom Length: 66.5" 4 Turning Radius: 41" 4 Turning Radius: 60.5" 4 Maximum Width: 67" 4 Maximum Width: 104" 4 Vertical Height: 10" 4 Vertical Height: 19" 4 Element Diameter: 3/8" $ 24.98 4-Bay Bow-tie UHF Antenna pr-4400 300 OHm $ 25.77 4 Channels 14 through 69 4 Element Diameter: 3/8" High Definition UHF Antenna High Definition UHF Antenna hd-9065 18 $ 47.16 8-Bay Bow-tie UHF Antenna $ 70.21 hd-9085 4 Active Elements: 23 4 Active Elements: 31 4 Boom Length: 50" 4 Boom Length: 74.75" 4 Turning Radius: 47.7" 4 Turning Radius: 73" 4 Maximum Width: 27" 4 Maximum Width: 27" 4 Vertical Height: 19" 4 Vertical Height: 25.2" 800 444 7223 | www.paceintl.com pr-8800 300 OHm 4 Channels 14 through 69 $ 60.71 HEADEND Multi Switches / Modulators 20 Combiners 21 Amplifiers 22 Racks / shelves 23 Character Generators 24 headend Tradewind™ Mini Modulator pmm* Tradewind™ 2x8 Port Rack Mounted Multi Switch $ 79.00 PMSR-208 Multi Switches/Mods The PMSR-208 is a 14V/18V satellite multi-switch used in all applications that require satellite IF distribution from 950-2150 MHz. It will allow the user to take two LNB outputs and provide inputs to a maximum of 8 receivers. The PMSR-208 routes any of the inputs to any of the outputs by utilizing the 14V/18V switching control from the satellite receivers. The PMSR-208 provides an excellent way to simplify any SMATV installation. 4 Combines TV input with satellite input Tradewind™ 5x16 Port Rack Mounted Multi Switch $ 180.00 TWI5X16 This multi switch has one input designed for off-air signals. It will allow user to take two LNB outputs and provide input to a maximum of sixteen receivers. It routs any of the input to any outputs by utilizing the 14V/18V switching control from the satellite receivers. It provides an excellent way to simplify any SMATV installation. 4 Built-in 22 KHz tone generator 4 Provides RHCP and LHCP switching for 16 receivers 4 AC power supplies power to LNB’S 4 Ideal for smaller systems 4 Combiners TV input with satellite output 4 Input selected by 14V/18V from satellite receiver employing right and left hand circular polarization 4 Input selected by 14V/18V and 22KHz from satellite receiver employing right and left hand circular polarization 4 Power adapter supplies power to LNB’s 4 3 year limited warranty $ 89.00 Professional quality channelized heterodyne audio/video modulator with SAW filter for adjacent channel capability. The PLL oscillator with micro-processor can control the output frequency to meet FCC required accuracy and off-setting. 4 Die cast housing 4 SAW Filtered for superior vestigial side band shaping and harmonic reduction 4 Microprocessor controlled frequency setting meet all FCC accuracy and off setting requirement 4 Upgrade to stereo with an optional stereo encoder card (PMM-SEC) 4 Channel can be reset within its band resetting dip switch and output filter only 4 Pre-emphasis defeat switch accessible from side panel for the insertion of composite BTSC stereo signal 4 Channels 2-92, listed on the front and rear 4 41 dBmV output 4 3 year limited warranty 4 3 year limited warranty Tradewind™ Agile Micro Mod $ 229.00 pamm Tradewind™ 2x16 Port Rack Mounted Multi Switch PMSR-216 $ 135.00 Require ssatellite IF distribution from 950-2150 MHz. It will allow users to take two LNB outputs and provide input to a maximum of sixteen receivers. It routes any of the input to any outputs by utilizing the 14/18V switching control from the satellite receivers. PMSR-216 is an excellent way to simplify any SMATV installation. 4 Power adaptor supplies power to LNBs 4 Input selected by 14/18V from satellite receiver employing right and left handcircular polarization 4 Built-in amplifier to comensate for insertion loss 4 3 year limited warranty 20 Agile micro mod in die cast housing. The double conversion and superior SAW filtering provides adjacent channel compatibility and spurious free output. It provides 45 dB output level from 50 to 864 MHz including CATV and TV frequencies. The channelization configuration can be changed by the up/down buttons located on the front panel. 4 Double heterodyne conversion 4 Automatic band splitting filters for superior carrier to noise ratio 4 Supports TV, CATV, frequency and lock function Tradewind™ Stereo Encoder Card pmm-sec2 $ 75.00 Stereo encoder card enables stereo in Tradewind mini mods. It accepts the left and right audio to generate a composite NTSC format stereo signal to be connected o the audio input of Tradewind mini rack modulator. 4 FCC frequency offset with automatic setting 4 Enables stereo in Tradewind™ mini mods 4 Pre-emphasis defeat switch accessible from side panel for 4 Compatible to current mini rack size and power supply 4 The insertion of composite BTSC stereo signal 4 LED readout of channel on front display 4 3 year limited warranty 800 444 7223 | www.paceintl.com 4 Good stereo separation, more then 20 dB headend Tradewind™ Full Size Modulator prm55-* $ 65.00 4 55 dBmV 4 Support HRC, IRC frequency offsets pad-806 $ 99.00 Agile micro demodulator for off-air channels. Extracts composite video from RF. PAD-806 is a high quality agile demodulator for any TV/CATV channel in the range 54 to 806 MHz. The channel display at front panel can sow the channel selected by the up/down buttons on the front panel. 4 Digital tuner controls 4 Microprocessor controlled to demodulate any TV/CATV channel within 54 to 806 MHz including HRC/IRC off setting 4 Low power consumption 4 Output capability to 860 MHz 4 Channel can be easily selected by the buttons on the front panel 4 3 year limited warranty 4 3 year limited warranty 4 Front panel -30 dB test point Tradewind™ Passive Combiners pPc-12g 12 Port $ 40.00 pPc-24g 24 Port $ 60.00 19” rack mounted quality combiners employ directional coupler design principals to obtain high isolation between input ports. They provide a convenient method to combine the outputs of modulators, strip amplifiers and processors. 4 Directional coupler design 4 High isolation 4 Low insertion loss 4 Test point in front panel 4 3 year limited warranty Tradewind™ Full Size FM Stereo Modulator pafm $ 120.00 FM stereo modulator with switchable mono or stereo capability. Designed especially for commercial installation, the PAFM provides superior signal-to-noise ratio, separation and enhanced dynamic range. The employment of a phase locked loop tuning circuit insures that the selected station will not drift. Switchable mono or stereo capability allows for FM transmission versatility. 4 Frequency agile Tradewind™ Full Size Agile Demodulator $ 99.00 prd-806 Allows for adjacent channel operation from Master Video for broadcast or CATV channels from 50 to 800 MHz. Demodulates VHF, UHF and cable channels from 54 to 806 MHz. The unit accepts any NTSC television signal in the 54 to 806 MHz frequency range and converts it to base band video and audio. Three additional outputs are provided as well as the IF output to monitor the status of the tuner. 4 SAW filter for superior vestigial sideband response 4 Stereo or mono operation 4 Keyed AGC system for excellent picture stability 4 Adjustable audio modulation and RF output level controls 4 Available in NTSC formats 4 Envelope detection ensures exceptional differential gain and phase 4 Power On Front Panel Indicator 4 Composite (MPX) stereo output for BTSC application 4 3 year limited warranty 4 4.5 MHz and MPX subscriber output for BTSC application 4 Quadrature single tuned audio detection 4 45.75 MHz IF monitor 4 3 year limited warranty 800 444 7223 | www.paceintl.com Tradewind™ 16 Ch. Active Combiner pac-16u 19" Rack Mount $ 129.00 19” rack mounted 16 channel active combiner. Combines RF modulated channels into one cable. The 40 dB minimum port-to-port isolation ensures combining without the potential of channel interaction. 4 19” rack mount 4 16 inputs 4 High isolation 4 AC convenience outlet 4 3 year limited warranty 21 Combiners Full size modulator built with SAW filter. The PLL oscillator set by jumper enables the oscillator to be set to any required frequency for output channels from 54 to 860 MHz. The filtered output amplifier can filter out unwanted spurious to provide harmonic performance for both inside or outside the band of the tuned channel. 4 Channels 2-36 Tradewind™Agile Micro Demodulator headend Tradewind™ Distribution Amplifier pda-52 $ 139.00 Amplifiers The PDA-52 MATV launch amplifier provides a high 52 dB gain output with extremely low noise and distortion. High reliability and rugged design make this amplifier ideal for medium to large MATV systems. The PDA-52 provides dual switchable input attenuators that protect the amplifier input from overdrive distortion by reducing the input signal level before the first amplifier stage. Front panel accessible controls provide optimum signal level adjustment. The internal band-split multiplexer accommodates separate UHF and VHF low/high band inputs, thereby reducing first stage amplifier channel loading improving distortion performance and ensuring the highest level of picture quality. Alternately, combined VHF and UHF signals from a broadband antenna can be inserted into the VHF input. The PDA-52 is equipped with a switchable FM (88-108 MHz) trap, which employs high-quality filters to remove strong local radio stations that cause picture distortion. Its wide bandwidth ideally suits the PDA-52 for use in MATV apartment distribution systems. 4 3 independently adjusted band, gain and slope controls Tradewind™ Agile HD Processor Tradewind™ Single Channel Amplifier $ 79.00 psca-fm Rack mounted FM band amplifier designed cover all VHF band frequencies. Automatic gain control is provided to set the output power independent of the input level. Externally adjustable input and output filter controls allow easy re-tuning of any amplifier within band type for special alignment applications, or repair replacement. A precision voltage regulator eliminates performance changes due to loading or power line fluctuations. 4 Adjustable RF Gain Port and the Test Port located on the front panel 4 Adjustable sound trap 4 Input and output test points 4 AC convenience outlet PAP-860 is a frequency agile, microprocessor controlled, heterodyne signal processor which uses the latest low noise, PLL, SAW filter and AGC techniques to provide superior quality and performance at an attractive low price. The unit has been specifically designed to produce the highest quality pictures at extremely low inputs while maintaining stable output levels with its sync tip AGC circuit. High input capability and SAW filtering provide the unit with the ability to process a single cable channel even in the presence of adjacent channel. High frequency and extremely high accuracy phase locked loop oscillators allow the unit to meet the frequency offset, even under worst case conversions to hyper band output channels. 4 For off-air channels 4 Microprocessor controlled 4 Lightning and line voltage surge protection 4 SAW filtered 4 3 year limited warranty 4 Adjacent channel rejection of 60 dB 4 Superior low noise 4 68-Channel range 54-806MHz (TV off-air 2-69) 4 Sync tip AGC for precise signal regulation 4 Not for CATV Channels 37-43 4 BTSC stereo signal compatible 4 52dB high gain typical, provides excellent carrier-to-noise performance for superior picture quality 4 45.75 MHz IF loop-thru 4 Output capability to 550 MHz 4 Stand by carrier generator 4 3 independently adjustable band, gain, and slope controls 4 (VHF-low, VHF-high, UHF) for optimal carrier-to-noise ratio and easy system balancing 4 Dual switchable input attenuators eliminate overloading and reduce harmonic distortion preserving picture quality 4 Convenient front access switchable FM trap filter eliminates high level local FM radio stations reducing harmonic distortion 4 -20dB output test point enables simplified setup an performance monitoring without service interruption 4 3 year limited warranty Tradewind™ Rack Mounted Distribution Amplifiers PCA-30RK550 30 dB $ 129.95 PCA-45RK550 45 dB $ 149.95 30 and 45 dB rack mounted distribution amplifiers with adjustable RF gain and tilt controls. They are high push-pull amplifiers producing signals with extremely low distortion. The design is capable of 158ch/129ch operation over the 5-700 MHz range. 4 Up to CATV channel 113/ Off-air channel 57 4 Designed for CATV distribution system 4 Double shielded RFI enclosure 4 Test port included on the front panel 4 3 year limited warranty 22 $ 599.00 PAP-860 800 444 7223 | www.paceintl.com 4 Front panel A/V ratio adjust 4 1¾” low profile rack mounting 4 3 year limited warranty Be sure to look in our Tools section for Self Tapping screws and other tools to help you mount your headend components on p. 68. headend Vented 19" Rack Shelf $ 24.00 es-19-iv 4 Load capacity of 80 lb. 4 Available shelf space is 18” wide x 15” deep ER-1, ER-184 Tradewind™ 84" Four Post Headend Rack $ 196.80 HE4PR-84 4 Max load 700lb 4 Pre-drilled holes for bolting to floor 4 19” rack mount Trip-Lite® Plug Strips PS-3612 12 outlet $ 44.00 PS-6020 20 outlet $ 60.00 4 Comes with 6' cord and circuit breaker Tradewind™ Rack Mount Enclosure System Tradewind™ Relay Rack er-1 71” $ 89.95 ER-184 84” $ 105.00 4 Max load 300 lb cab-1410-77 12 Outlet Rack Mounted Bar IBAR12 4 19” rack mount Racks/Shelves HE49R-84 Tripp-Lite® $ 115.00 4 Strip with enhanced noise suppression on 4 outlets $ 1,674.00 The Tradewind line-up of 19” rack mount enclosures are designed to meet the exacting demands of today’s communication equipment needs. Tradewind incorporates reliability, durability, flexibility and security in a modular design. 4 Welded 1” square tubing vertical posts, front and rear cross-ties 4 Solid top with two (2) 75 CFM exhaust fans for heat dissipation and two (2) 3” grommeted cable entry locations. 4 Removable side panels 4 Flush mounted smoked plexiglas front door with reversible hinges Tradewind™ Rack Mount Chassis $ 60.00 prc12 Tradewind Rack Chassis for Mini Mods. The chassis holds 12 mini mods with room for the PPS12 (Power Supply Insert) 3 year limited warranty. Tradewind™ 6 Pk. Slim Vertical Rack Shelf RK6PACKSLIM 2.2” $ 54.00 RK6PACKSLIM-sh 2.6” $ 45.00 Tradewind™ Power Supply Insert $ 99.00 pps12 4 Flush mounted perforated steel rear door with reversible hinges 4 Open bottom for easy cable access and enhanced airflow. 4 Adjustable zinc plated front and rear mounting angles. tapped 10-32 4 Slotted five (5) side strut design for infinite adjustment of mounting angle locations 4 Slim vertical rack shelf for rack mounting DIRECTV or Dish® receivers 4 Fits in standard mini mod rack chassis 4 Adjustable leveling feet on all four corners 4 Dimensions: VPO: 77"; D: 31.5"; H: 83"; W: 21-1/8” 4 Tradewind 6 Pack for mounting DIRECTV’s new D11 receivers into a headend 4 Switching power supply included 4 Built-in cooling fan 4 Rack mount: 19” 4 3 year limited warranty 4 Textured black powder coat 4 Metal bar to hold receivers in place 800 444 7223 | www.paceintl.com 23 headend Available 2nd Quarter of 2007 Economical, turn-key video messaging system. Create pages on your PC and play them back using the compact, attractive standalone player. Features Composite, S-Video, and VGA outputs. Units come bundled with VIP Composer software for Windows Character Generator 2000/XP/Vista. VIP Composer allows you to create projects GUESTV guestv GUESTV brings private cable systems a suit of some of the most watched channels on television. GUESTV brings private cable systems a suite of some of the most watched channels on television. Over fifty percent of television viewers use our Channel Guide to make their viewing choice. There are fully customizable and unlimited background screens and colors to choose from. Our Concierge Channel is an HTML based local information and advertising channel. Each system is delivered ready to plug in with one customized background screen and your cable lineup pre-configured. GUESTV is the only system designed exclusively for use in DIRECTV® headend systems. This offers remotely controlled and scheduled DIRECTV® IRD through our Satellite On Demandô interface. The GUESTV is built into one rack mounted GUESTV Client Unit and is all for one price. 24 using images from your PC, including scanned pictures, digital Call for Pricing photographs, etc. Comes with 100 professional backgrounds to get you started. Use any TrueType font to title over your back- Video Information Player Estimated Cost on Arrival: $ 2,395.00 grounds, then sequence your pages in any order and publish them to the VIP via Ethernet. Pages may be scheduled by date, day of week, and time. Image formats supported include .BMP, Talk to our expert sales staff and learn more about upcoming products! Call 800 444 7223 or visit online: www.paceintl.com .JPG, .TIF and more. Also supports a wide screen format of 16:9 aspect ratio and “portrait” mode for rotating the monitor on its side – great for digital signage applications. 800 444 7223 | www.paceintl.com Signal distribution SIGNAL DISTRIBUTION 26-31 CABLES 32-33 Connectors 33-35 Connector tools 36-37 Splitters 38 Taps 39 HARDLINE 40-41 Grounding 42-43 Wire Management 44 Wall Plates 45 Surge Protectors 46 Power Inserters 800 444 7223 | www.paceintl.com Fiber optic 25 FOXCOM® RF-2 TO FIBER DISTRIBUTION SYSTEMS (To view our DIRECTV® MFH-1 One Wire Residential Installation chart, turn to page 7 in Satellite Section.) L-band / SMATV / Internet with Return Path 2 1 3 Requires Foxcom Chasis, page 28 6 2 9 8 RG6 1 3 4 6 14 SINGLE MODE FIBER JUMPER Requires Foxcom Chasis, page 28 7 7 10 8 5 9 15 5 6 8 4 13 11 12 RG6 10 1. SATELLITE ANTENNA: 9. L-BAND RECEIVER Multiple signals are received into LNB’s and transmitted into the MFH1 System. 10. AVERLUX MICRO-NODE 1 of 16 converts optical signal to RF signal. 1. SATELLITE ANTENNA: 7. L-BAND RECEIVER Multiple signals are received into LNB’s and 2. OFF-AIR ANTENNA Receives CATV signal. Upstream is collected at transmitted into the MFH1 System. 8. CATV RECEIVER 3. MFH-1 IN A BOX F-port and transmitted on return path fiber. 2. OFF-AIR ANTENNA Balances and combines DIRECTV satellite 11. CORNERSTONE CABLE MODEM 3. MFH-1 IN A BOX 9. NAS DIPLEXER 950-3550 MHz content. Balances and combines DIRECTV satellite 4. SMATV HEADEND 12. TRADEWIND 16-WAY COMBINER content.. 10. MFH-1 DISTRIBUTION NODE 5 13. AVERLUX RETURN PATH RECEIVER AL351 6. AVERLUX TRANSMITTER AL127 14. NAS DIPLEXER 950-3550 MHz 4. AVERLUX TRANSMITTER AL127 1 of 16 converts optical signal to RF signal. 1 of 16 CATV receiver. Combines L-Band and CATV signals. Supports up to 16 units. TRADEWIND 2-WAY SPLITTER TERMINATION SYSTEM Takes RF signals from MCU, converts to optical Takes RF signals from MCU, converts to optical and transmits at 1550 nm. signal and transmits at 1550 nm. 15. MFH-1 DISTRIBUTION NODE 5 AVERLUX TRANSMITTER AL112 7. AVERLUX TRANSMITTER AL112 Takes RF signal from PFA 6600, converts to opti Takes RF signal from PFA 6600, converts to cal signal, transmits at 1310 nm. optical signal, transmits at 1310 nm. 6. FOXCOM OPTICAL SPLITTER MODULE 26 Splits optical signal 16 ways. 8. FOXCOM OPTICAL SPLITTER MODULE Splits optical signal 16 ways. 800 444 7223 | www.paceintl.com Combines L-Band and CATV signals. Supports up to 16 units. Signal distribution Foxcom® AverLux Transmitter Foxcom® AverLux Transmitter (L-Band Only) Call for Pricing 127f155000sc01 112d131011sc01 Call for Pricing The AL 120 was designed to address the latest and future requirements of increasingly demanding DBS/DTH multiband distribution needs. Modular and flexible, the AL 120 series can cost effectively process signals from a single LNB for the elimination of ineffective coax or the output from the latest frequency devices such as multi-polarity stackers with a bandwidth from 2 to 3500 MHz. A menu of various output powers, wavelengths and options are available to tailor your fiber distribution network for optimum performance. When coupled with Foxcom’s FPS line of passive optical components, optical signals can be split and multiple AL 100 signal paths can be combined on a signal fiber using wave division multiplexing technology leveraging existing fiber infrastructure and insuring future expansion capability. The AL 120 series transmitter module occupy one slot in the AL 900-08 19”, 3U active shelf. AverLux Series 110 CATV/SMATV transmitters process AM/VSB, 8VSB, QAM or terrestrial signals inputs from multiple current or planned sources. Signal integrity is preserved guaranteeing excellent video quality required for High Definition reception. The AL 110 Series serves a full range of high performance CATV/SMATV applications cost effectively. A menu of various lasers, output powers, wavelengths and options are available to provide maximum flexibility and scalability. When coupled with Foxcom’s FPS line of LGX style optical passive components, transmitter outputs may be split or multiple AL 100 signal paths can be combined using Wave Division Multiplexing to make use of existing fiber infrastructure and insure future expansion capability. The AL 110 series transmitter occupy two slots in the AL 900 19”, 3U active shelf. Call for Pricing 35101sc01ss02 Call for Pricing The AverLux™ Return Path Receiver complements the AL400 Series Micro-Node to complete the Return Path Fiber Link back to the headend. Subscriber DOCSIS return path signals are converted back to RF where they can be combined with multiple AL350 outputs for processing by the operators Cable Modem Termination System. A typical application calls for one AL350 for each AL400. The AverLux™ AL900 Series Active shelf can accomodate up to eight AL350 modules. Foxcom® 8 Slot Shelf Foxcom® AverLux Receiver (L-Band Only) 31201SC01SS01 Call for Pricing The AverLux family of optical receivers complements the AL 110 Series transmitters completing the optical broadband RF video link by converting optical signals transparently to the originating format; AM/VSB, 8VSB, QAM or off-air terrestrial and head-end generated. Available in a compact, wall mount enclosure, the receiver fits easily into any MDU distribution scheme to support coax distribution or as the perfect fiber link for applications where coax approaches are limited. Powering for the AL 300 series is provided by the AL 900 series of power adapters, inserters and cables. Foxcom® AverLux Receiver (L-Band Only) 32701SC01SS01 Call for Pricing The AverLux family of optical receivers compliments the AL 120 Series transmitters completing the optical broadband RF video link by converting optical signals transparently in the originating format; satellite QPSK/8PSK. With an available bandwidth from 2 – 3500 MHz. The AL 120 Series cost effectively handles the most complex stacking schemes or basic LNB intra/inter-building spans. Available in a compact, wall mount enclosure, the receiver fits easily into any MDU distribution schemes supporting coax distribution or as the perfect fiber link where traditional coax approaches are limited. 800 444 7223 | www.paceintl.com 90008001 Call for Pricing The AL 900-08 is a 19” rack mounted, 3U shelf accommodating any combination of up to eight AverLux™ shelf mounted Transmitters or Receivers. The AL 900 comes equipped with the AL901 Universal 100/220 VAC power supply to support most global AC mains applications and capable of powering a fully populated rack. An optional -48 VDC supply is available on special request. An additional, dedicated slot in the AL900 is reserved for the insertion of an AL901 spare or redundant power supply. All DC power connections are accomplished via a PCB backplane and mating DB-9 connectors for simple and trouble free operation and maintenance. 27 Power Inserters 112d131007sc01 Foxcom® AverLux Return Path Receiver Signal distribution Foxcom® AverLux Micro-Node Foxcom® 1x16 Optical Splitter Module FPSSPL01SC16001 Call for Pricing The LGX style splitter module with 1:16 configuration. Optical input is from the rear of the module and all outputs exit the front. The 1×16 occupies two LGX slots. 41201SC01SS01 Call for Pricing The AL400 series Micro-Node supports CATV band signal distribution as well as two-way cable modem data services affording operators the widest choice of content and service provisions available in a single wire system. Foxcom® Universal Power Supply 9100142n Call for Pricing Used as the primary power source for the AverLux™ AL300 and AL400 Series products, the AL910 is available with two ratings and adapter cables to a host of combinations and applications at the building, in the IDF closet or to power the CPE. Versions are available to support one to several modules with ratings from 500 mA to over 4.0 Amps. Use with Power Supply/Insert Cable (opposite page). 4 Universal AC input 4 2-pole USA plug [ROW plugs - optional “E” suffix] Foxcom Rx 60-90VAC Power Adapter ® Fiber Optic Foxcom 1x8 Optical Splitter Module ® fpsspl01sc08001 Call for Pricing The LGX style splitter module with 1:8 configuration. Optical input is from the rear of the module and all outputs exit the front. The 1×8 occupies one LGX slot. Call for Pricing 920-0123F Used as an alternative power source for the Averlux™ AL300 and AL400 Series products where deployments are coax cable powered, the Power Inserter converts a cable industry standard, center conductor fed, 60/90 VAC source into 12 VDC for use by the equipment. AS with the AL910 Series, adapter cables offer flexibility with current capability up to 2.3 Amp. 4 Multiple powering options 4 Class II power [without earth pin] 4 Protections: Short circuit / Over load / Over voltage 4 Approvals: UL / CUL / CCC / CB / CB 4 Reduced labor costs Foxcom® RX Power Adapter 910-0115n Foxcom® Chasis FPS-LGx-12 Call for Pricing 4 Slide out drawer provides front access Foxcom® Standalone Tx Power Supply AL100/200 4 Holds 12 LGX modules 9400108n 4 Recessed face plate for jumper protection 4 Built-in cable storage 4 Fold-down rear door 4 16-gauge, black aluminium 4 Smoked lexan front door 4 For 19” rack 28 Call for Pricing The AL 940 Series Standalone Power Supply is used for powering a single AverLux™ AL 100, 200 and 350 Series Transmitters or Return Path Receivers with the wall mount option where the AL900 Series Shelf is not applicable or required. The unit features a Universal 100/220 AC mains input with a 12 VDC, [minimum] 800 mA output via a female DB-9 connector to mate with the module’s power input. 800 444 7223 | www.paceintl.com Call for Pricing Used as the primary power source for the AverLux™ AL300 and AL400 Series products, the AL910 is available with two ratings and adapter cables to a host of combinations and applications at the building, in the IDF closet or to power the CPE. Versions are available to support one to several modules with ratings from 500 mA to over 4.0 Amps. 4 12VDC / 1.5A Out 4 Protections: Short circuit / Over load / Over voltage 4 Approvals: UL / CUL / CCC / CB / CB Signal distribution Splice Protection Sleeves fp-03 Foxcom® Power Supply/Inserter Cable Call for Pricing 9300623s When used wth the AL910 or AL920 series of power adapters, the AL930 cable provides the ability to power up to 4 AL300/400 Modules via four 2.1 mm co-ax plugs, one F-Type Male Connector for related CPE, and one 5-pin male Mini-DIN connector for cascading additional adapter cables or powering related Foxcom product lines of equipment. SDTV products. The SDTVplus System is a cost effective hybrid fiberoptic-coax broadband Call for Pricing FSM-50S KIT The FSM-50S Fusion Splicer sets the standard for core alignment fusion splicers. The FSM-50S is the fastest fi eld splicer available, and completes a splice and tube heat in a total of 44 seconds. Special features include its small size and weight - the smallest in the industry - and the legendary ruggedness Fujikura is known for. The FSM-50S also includes user-friendly features such as calibration-free arc adjustments, automatic fiber type identifi cation and reduced operational steps. The FSM-50S also offers increased fl exibility for various splicing tasks with user-selectable front and back monitor positioning. 4 Automatic core to core, low-loss splicing regardless of fiber quality or age 4 9-second splicing time, 35-second heat time (60mm sleeve) The FP-03 series is the industry standard for durable and lasting protection of single fi ber splices in fi eld installations, while the FP04(T)/05 provide these same performance levels for 8/12 fi ber ribbon respectively. The FPS01 and FPS04 series are specially designed for optical components, where small packaging is a priority. These micro sleeves provide the known reliability of Fujikura sleeves in the smallest possible lengths. This easy and cost effective method is a great alternative to recoating. The FPS01 and FPS04 series offer a wide range of options to accommodate various coating sizes, and are manufactured in a variety of lengths. This gives great flexibility in designing optical modules. Fiber Optic Pace is also your distributor of Foxcom® AFL® Fiber Splicer with Access Kit 4 Dual, user selectable monitor position SC-APC PIGTAIL 2m LENGTH entertainment and data services in multiple 4 Excellent visibility in bright sunlight with c146523-0002 dwelling units (MDUs). SDTVplus provides 4 5.6” TFT Color LCD display convergence services such as DBS, Cable 4 Automatic arc calibration distribution system, used to distribute TV, Local Off-Air TV, and broadband based 4 Long life battery (up to 160 splice/shrink cycles per charge) Internet services. Call us today to learn more! 800 444 7223 Call for Pricing Call for Pricing The Subscription Channel (SC) connector is best known for its locking mechanism that gives an audible ‘click’ when mounted. The push-pull design prevents rotational misalignment. The SC connector family includes the Physical Contact (PC) zirconia ceramic ferrule endface that reduces back reflection in both singlemode and multimode versions. To further reduce unwanted back reflection in a single-mode system, AFL offers the Angled Physical Contact (APC) version that has a ferrule endface with an 8° angle. The molded connector body and strain-relief boots are made from UL-rated material with the option of RoHS compliance. Integrating Technology & Distribution 800 444 7223 | www.paceintl.com 29 Signal distribution AFL® LL-2400 Single Fusion Splice Tray 91710-06 1 Meter FC/APC-SC-APC Jumper Call for Pricing AFCASCR2002Q001 AFL® FPB-201 Fiber Demarcation Box DM000108 Call for Pricing AFL has designed a cost effective solution for a protecting the passive demarcation of premise fibers. The FPB-201 is injection molded with an integral fiber retention system allowing for quick installation and a positive lock strain relief for most premise fiber cable. This device allows for the indoor and protected outdoors interconnect of up to 2 standard SC adapters in a protected white plastic enclosure to blend in most premise environments. 4 Compact size takes up less wall space for installation SC/APC-SC/APC Jumper Fiber Optic AsCASCRs001Q001 1 Meter Call for Pricing AsCASCRs001Q002 2 Meter Call for Pricing AsCASCRt001Q00 20 Meter Call for Pricing 4 Thin profi le prevents accidental damage in congested installations 4 Molded inner slack storage area insures minimum bend radius preventing micro bends and unnecessary loss or fiber damage 4 No additional tie wraps or clamps needed due to integral positive lock strain relief 4 Inner tray retains up to two fusion or mechanical splice sleeves 4 Accepts standard SC connectors SCA or SCU C130082 4 Protects fiber connection from accidental contamination or movement allowing long term preservation of connection in hostile environments C130082 AFL® Small Flange SC/APC Bulkhead adaptor C130082 Call for Pricing 4 FC - SC Simplex 4 Ceramic insert 4 Stainless steel Small Flange SC/APC Bulkhead adaptor c147880 4 Cost effective passive solution protects each connection without driving project over budget 4 Key-hole, three screw mounting allows two of three screws to be leveled and pre installed AFL® LL-2450 Single Fusion Splice Tray 91957-00 AFL® LightLink™ LL-400s FM000639 4 Cable entry/exit grommet seals 4 Removable Hinged Front Cover 4 Removable sliding cover for easy access to complete box in congested locations 4 72 single fusion splices 4 Stainless steel 800 444 7223 | www.paceintl.com Call for Pricing The LL-400s Fiber Optic Splicing and Distribution Enclosure provides for organizing, splicing, and interconnecting fibers in FTTx, broadband, distribution, and building entrance applications. Each LL-400s enclosure features a scratch resistant powder coated aluminum base and a fully gasketed cover. A unique self-sizing grommet design allows for express and preterminated cable installation. The LL-400s is a butt-style enclosure equipped with four independent cable entry/exit grommets, used for outdoor pedestal or indoor building entrance and riser splicing applications. The unit supports a maximum storage and splicing capacity of up to 72 single or 144 mass-fused fibers. 4 Independent cable strain relief system 4 Fiber routing system Call for Pricing Call for Pricing 4 Stores 12 single fusion splices 4 Two locations available for splice and connector to reside allows fl exible installation and up to two splices if needed 4 SC+SC Splice Block 30 Call for Pricing 4 Splice tray support system 4 144 mass fusion splices Signal distribution AFL® LG-50 Sealed Fiber Optic Splice Closure FC000053 Call for Pricing The LG-50 is a versatile closure that was designed for splicing low fiber counts, sheath repair or to provide an isolation gap on armored cables. The LG-50 can be used in either an in-line or butt confi guration and is rated for 10 ft. waterhead. 4 Two cable ports accommodate cables to 0.70” O.D. for splicing and 1.0” O.D. for grounding/bonding 4 Individual cable retention clamps 4 Removable, integral central splicing module AFL® Optical Power Meter Call for Pricing OPM1-2C Optical power meters may be used to measure optical power in premises, telco, or broadband fiber optic networks. When used with an LED or laser light source, an OPM can also measure the attenuation (insertion loss) of multimode or single-mode cables. With only two controls – Power and Wavelength – the OPM 1 is our simplest to use optical power meter. Optical power in dBm and the calibration wavelength setting are displayed on an easy to read LCD display. 4 Common or isolated grounding/bonding 4 Strand mounting hardware included AFL® Connector/Adapter Cleaning Kit C182120 Call for Pricing 4 FCC-R Replacement cartridge (400 wipes) AFL® HiLite 4 ACT-01 Adapter Cleaner Tips (20) Call for Pricing hilite AFL® LG-20 Sealed Fiber Optic Splice Closure FC000002 Call for Pricing The LG-200 is a sealed dome closure designed for medium count fiber splicing (< 96 single or 288 mass) in a butt confi guration. Utilized in aerial or underground environments where a sealed closure is required. Ideal for express or ring applications. The LG-200 requires no tools for re-entry. 4 Dome Closure - 96 Single or 144 mass fusion capable 4 5 cable, kits for sealing and retention 4 Grounding Terminal 4 No cable grounding kits 4 Hanger brackets or splice trays 4 Supports loose tube, core tube, dielectric and armored cable designs 4 Installation and re-entry using common hand tools The HiLite is compact but powerful visible red laser sources designed to troubleshoot faults on fiber optic cables. Light generated by these units will escape from sharp bends and breaks in jacketed or bare fibers, as well as poorly mated connectors. They can identify faults in fiber optic jumper cables, distribution frames, patch panels, and splice trays. The HiLite is an excellent complement to an OTDR because they can locate faults inside the OTDR’s dead-zone. Other applications include end-to-end continuity checks, identifying connectors in patch panels and fibers during splicing operations. The universal connector interface provides fast operation with many connector styles without changing an adapter. 4 Automatic core to core, low-loss splicing regardless of fiber quality or age 4 9-second splicing time, 35-second heat time (60mm sleeve) 4 Dual, user selectable monitor position 4 Excellent visibility in bright sunlight with 4 Alcohol dispenser (1) 4 Lint free Kim Wipes 4 Carry case AFL® Fiber Preparation Fluid fpf-1 Call for Pricing FPF1 is a non-flammable, environmentally safe, solvent engineered to clean fibers after stripping, before fusion splicing or field termination. This product is exclusively produced for Noyes Test & Inspection by Micro Care Corporation, a world leader in cleaning solvents. 4 5.6” TFT Color LCD display 4 Automatic arc calibration 4 Long life battery (up to 160 splice/shrink cycles per charge) 4 Fully sealed to protect fiber and splices ensuring longevity 800 444 7223 | www.paceintl.com 31 Fiber Optic The Connector/Adapter Cleaning Kit is a complete kit solution for maintaining the optical integrity of passive network components such as connectors, jumpers, couplers, patch panels, etc. The Connector/Adapter Cleaning Kit includes all the cleaning supplies you need to maintain clean ferrules and connectors in an organized, portable and rugged carrying case. Rugged carrying case for complete protection and organization of supplies 4 FCC-02R Prep Cleaner (1) Signal distribution Save your back from lugging cables around your job site. Check out our cable caddies on p. 60. Copper Covered Steele Reel in Box Jacket Type and Thickness in / mm Nom Imp. Shields Type & Coverage Nom Vel of Prop. Dialetric Type Nom OD in / mm Nominal Capacitance pF/ft pF/m RG6 Center Conductor Solid Copper Price Coax Cable CH1829 RG6 Single Foam PE .180 4.57 60% Black PVC .270 6.86 16.2 53.1 82% 75 Ohm 1000 ft $ 34.00 CH1829-WH RG6 Single Foam PE .180 4.57 60% White PVC .270 6.86 16.2 53.1 82% 75 Ohm 1000 ft $ 34.00 CH1829SC RG6 Single Foam PE .180 4.57 60% Black PVC .270 6.86 16.2 53.1 82% 75 Ohm 1000 ft $ 70.00 CH1829SC-WH RG6 Single Foam PE .180 4.57 60% White PVC .270 6.86 16.2 53.1 82% 75 Ohm 1000 ft $ 70.00 CH1839 RG6 Single With Messenger Foam PE .180 4.57 60% Black PVC .270 6.86 16.2 53.1 82% 75 Ohm 1000 ft $ 50.00 CH1839SC RG6 Single with Messenger Foam PE .180 4.57 60% Black PVC .270 6.86 16.2 53.1 82% 75 Ohm 1000 ft $ 80.00 CH1840 RG6 Dual With Messenger Foam PE .180 4.57 Black PVC .270 6.86 16.2 53.1 82% 75 Ohm 500 ft $ 90.00 CH1840SC RG6 Dual with Messenger Foam PE .180 4.57 Black PVC .270 6.86 16.2 53.1 82% 75 Ohm 500 ft $ 150.00 CH1840SC-WH RG6 Dual With Messenger Foam PE .180 4.57 White PVC .270 6.86 16.2 53.1 82% 75 Ohm 500 ft $ 150.00 CH1841 RG6 Dual Foam PE .180 4.57 Black PVC .270 6.86 16.2 53.1 82% 75 Ohm 500 ft $ 90.00 CH1841SC RG6 Dual Foam PE .180 4.57 Black PVC .270 6.86 16.2 53.1 82% 75 Ohm 500 ft $ 170.00 CH1841-WH RG6 Dual Foam PE .180 4.57 White PVC .270 6.86 16.2 53.1 82% 75 Ohm 500 ft $ 90.00 CHRG6Q-BL-UL RG6 Quad Foam PE .180 4.57 60% + 40% Black PVC .270 6.86 16.2 53.1 82% 75 Ohm 1000 ft $ 90.00 CHRG6Q-WH-UL RG6 Quad Foam PE .180 4.57 60% + 40% White PVC .270 6.86 16.2 53.1 82% 75 Ohm 1000 ft $ 90.00 Black PVC .400 10.16 16.2 53.1 82% 75 Ohm 1000 ft $ 110.00 Black PVC .400 10.16 16.2 53.1 82% 75 Ohm 1000 ft $ 130.00 60% 60% 60% 60% 60% 60% RG11 CHRG11 Foam PE .280 7.11 CHRG11FL (Flooded) Foam PE .280 7.11 32 60% 60% 800 444 7223 | www.paceintl.com Signal distribution Commscope® RG6 5730bx 1000 ft. Box $ 90.00 Commscope® RG6 Quad Plenum Cable 2227v 1000 ft. Reel $ 460.00 Commscope® RG6 Plenum Cable 2275v 1000 ft. Reel $ 440.00 Commscope® RG59 Spool 5571pspl blk Black, 1000 ft. Reel $ 80.00 5571spool White, 1000 ft. Reel $ 80.00 tx15a60feb/dbs flooded $ 480.00 Snap-N-Seal Compression Universal “F" Connector for RG6 & RG6 Quad Coax tx15a60vbl/dbs standard $ 540.00 sns1p6u .500 Flex Feeder bag of 50 $ 15.00 Commscope® RG11 Plenum Cable 2285k 1000 ft. Reel $ 1400.00 Commscope® RG11 Quad Plenum Cable 2287v 1000 ft. Reel $ 2000.00 753805b 500 ft. 4 Conductor, 24 Gauge Phone Wire $ 625.00 24-4-1000 1000 ft. Pull Box $ 40.00 Snap-N-Seal Compression “F" Connector for RG6 Coax SNS1P6 bag of 50 $ 15.00 4 5 conductor, 23 gauge, solid copper CAT5E Enhanced Mini RG59 Cable zm-bl-500 Blue $ 45.00 zm-rd-500 Red $ 45.00 zm-y-500 Yellow $ 45.00 zm-wh-500 White $ 45.00 zm-bk-500 Black $ 45.00 cat5e-b 1000 ft. Pull Box $ 90.00 Cat5e-w 1000 ft. Pull Box $ 90.00 Cat5e-y 1000 ft. Pull Box $ 90.00 Snap-N-Seal Compression “F" Connector for RG6 Quad Coax sns1p6qs bag of 50 $ 15.00 Snap-N-Seal Compression “F" Connector for RG59 Coax 8" Flat Cable $ .79 ch-flat SNS1P59 bag of 50 $ 15.00 4 Used for running coax under windows or doors 4 Ideal for RV's and apartments 800 444 7223 | www.paceintl.com 33 Cable/Connectors Commscope® HDTV Cable Signal distribution Snap-N-Seal Compression “F" Connector for RG6 Plenum Coax $ .30 ea. SNSpla 3 GIG F90 Connector f90-2g PPC RG-6 Quad Compression Connector cmp6q bag of 50 bag of 100 $ 70.00 $ 14.00 3 GIG Barrel Connector f81-2g Snap-N-Seal Compression “F" Connector for RG11 Coax $ 4.55 ea. SNS11AS bag of 100 $ 18.00 bag of 100 $ 12.00 Tradewind™ RG6 Radial Crimp “F" Connector RG6-R bag of 100 $ 14.00 RG6 Radial Crimp “F" Connector with O-ring Connectors rg6-ro bag of 100 $ 16.00 2.8 GIG Terminator RG6 Cable Connectors rg6wr-icm PPC RG-6 Compression Connectors cmp6 bag of 50 $ 14.00 rg6wro-icm bag of 100 $ 22.00 (outdoor) bag of 100 $ 28.00 f59t2g RG6 & Quad With Ring rg6NR-icm DIRECTV® & DISH Network APPROVED! rg6NRo-icm bag of 100 $ 22.00 (outdoor) bag of 100 $ 28.00 rca-f RG59 Radial Connectors .290 RG59wr-icm bag of 100 bag of 50 $ 17.00 4 Use the EX6XL for either standard or Quad RG6 coax 4 Use the VT-100 Compression Tool for an excellent connection $ .22 $ 27.00 PPC Universal RG6 and RG6 Quad Compression Connector ex6xl RCA Female to F Male Adapter RCA Coupler rca-rca RG6 Hex Crimp “F" Connector rg6-hex bag of 100 $ .19 $ 10.00 RG6 Hex Crimp “F" Connector with O-ring and Gel rg6-hexso bag of 100 $ 10.00 F Female to RCA Male Adapter ff-r 34 800 444 7223 | www.paceintl.com $ .40 Signal distribution Right Angle RCA RG6 & Quad Uni RCA Compression Connectors $ 2.00 35-511g $ 1.25 FSC6RCAuv5 Sub Mini (26GA) Compression BNC $ 2.37 fsbnc1rgb RG6 F Compression Connector fs6uv5 bag of 25 $ 11.25 Submini (26 GA) Compress RCA RGBHV BNC Mini 4 Part $ 2.37 FSRCA1RGB $ 2.37 fsbnc-15rgb F11WR Connectors Two Piece RG-11 F Connector $ 4.50 Female F to Male BNC Adapter $ .36 bfa Mini Cable RCA Connector $ 2.37 FSRCA-15RGB RG11 BNC 1-each fs11bnc $ 4.00 RG59 RCA Radial Crimp Connectors $ .55 RG59-rcawr Color Bands FSCR-x bag of 100 $ 4.00 BNC Compression Connector for RG6 & Quad Coax fs6bncuv5 $ 2.38 RG59 & Quad Uni RCA Compression Connectors FSC59RCA-uv5 Weather Boot wb-1 RG59 & Quad BNC Connector fs59bncuv5 $ 1.25 $ .12 $ 2.38 800 444 7223 | www.paceintl.com 35 Signal distribution Platinum Tools® Easy RJ45 Connector on p. 44. Platinum Tools CAT5E Stripper 15015 $ 13.00 This economical tool has been specifically designed to strip the cable jackets from Category 5 and 5e twisted pair cables. No adjustments are required and will not nick the inner conductors. EZ-RJ45 Crimp Tool F Connector Compression Tool $ 25.00 tw-ct 4 This is a heavy duty compression tool and works on all PPC and Snap-N-Seal Compression Connectors. 100004 $ 59.99 4 This high quality crimp tool is designed to quickly crimp and cut the wires of the EZ-RJ45® connector in one easy simple operation 4 The ratcheted straight action crimping motion ensures a uniform crimp every cycle 4 Features precision cast crimping dies for superior accuracy 4 Built in wire cutter and stripper Platinum Tools® Compression Crimping Tool Connector Tools cs-596 $ 7.50 Pro-Brand RG6/RG59 Cable Stripper RG-Stripper $ 39.95 16201 RG6 and RG59 Cable Stripper $ 10.00 4 The SealSmart Compression Crimp Tool provides simple, fast and reliable terminations 4 The perfect solution for CATV, DSS, Security and Residential Structured wiring installations 4 Connector adapters are included for F, RCA & BNC SealSmart connectors and mount in handle for easy storage 4 Straight action mechanism provides 360° uniform compression 4 Adjustable crimp height RJ 45 Tool Ripley RG6/59 RG6 Quad Cable Stripper sdt596-250 $ 22.00 Ripley RG11 Cable Stripper sdt-11-250 $ 19.95 tcrj45t 4 Cuts, Strips And Crimps Ripley Ratcheting Crimp Tool For RG6 radial connectors rtt $ 75.00 4 Use on RG6-R and RG6-RO connectors for water-tight seal 4 Powder coated finish for long lasting durability with cushioned handles Hex Crimp Tool hx-596Q $ 16.66 4 Use with RG6 & RG59 HEX connectors $ 22.00 Radial Crimping Tool $ 69.00 RTC360 4 Works with Pace & ICM radial connectors 4 Produces a watertight, weather-resistant seal that also reduces radiation leakage Strip Tool for RG59, RG6 & RGB Cable ps/59/6/rgb 36 $ 23.00 4 Made of high quality stainless steel 800 444 7223 | www.paceintl.com Snap-N-Seal Compression Tool snsutL $ 70.00 4 Use for a proper connection on RG6, RG59 & RCA Snap N Seal connectors Signal distribution Attaching a Connector to Cable Compression Tool vt100 $ 34.50 4 Works on Snap-N-Seal and PPC compression connectors Compression Tool $ 75.71 cplcct-lM outer shield braid foil 4 Use for RG6/RG59, BNC, F, & RCA Compression Connectors center conductor Dielectric Compression Tool vt300 $ 83.50 6 x 6 / 8 x 8 Modular Crimper Tool $ 25.00 300-568 4 PPC compression crimper for RG6, RG59, & RG11 4 Cuts, strips and crimps Dual modular crimping tool Minimum industry standard for coaxial cable from the LNB to the receiver is: 4 RG-6 Double shield with 60% braid 4 Cable that has been “swept” to 2GHz for frequency response is required for stacked LNB’s it-1000 $ 74.50 100 Feed Thru Bushings 4 For RG6 and RG59 coax Replacement Blades for the IT-1000 it-1002 $ 19.00 rpt Snap-N-Seal Comp. and Stripping Tool $ 14.00 ftb-56B RG6 (black) $ 2.00 ftb-56I RG6 (ivory) $ 7.00 ftb-59B RG59 (black) $ 2.00 ftb-59I RG59 (ivory) $ 5.00 ftbd-56b black, bag of 100 $ 2.00 ftbd-56I ivory., bag of 100 $ 2.00 RG6 Dual Feed Thru Universal Compression Tool cat-universal $ 61.52 cat-as 500 Gardner Bender Wire Staples $ 78.00 Gently peel back the braid and push on the connector. Center conductor wire should extend 1/8” beyond connector. Use correct compression tool to fit the connector to the cable 4 Improperly connected fittings may cause an impedance mismatch, which may effect picture quality Due to the nature of cable, there is signal loss and voltage loss throughout the cable. Calculate signal loss of RG6 at 6dB per 100 feet for VHF/UHF frequencies and 10dB per 100 feet for LNB (950 MHz1450 MHz) frequencies. 4 Signal loss due to excessive cable length may necessitate in-line amplification 4 In-line amplifiers do not amplify voltage It is important to use coaxial cable that is rated to the frequencies for which it is going to pass 4 RG-59 is rated to pass up to 1GHz 4 RG-6 that is swept tested to 2 GHz will pass 2250 MHz, which will work with stacked LNB systems 4 Works on RG6 and RG59 compression "F" connectors Compression Tool for RG59/6/7/11 Use correct crimping tool for connectors and cable being used. Strip the wire to have _” dielectric showing. When stripping the wire, make sure to not cut off the braid 4 The braid acts as the ground for the cable $ 15.00 PS1752U 800 444 7223 | www.paceintl.com 37 Connector Tools Ripley Pocket Toner 4 Compression cable fittings or other fittings that meet industry standards for water ingress as well as RF ingress and egress Signal distribution Tspl-2 Tspl-6 HR S2 Tradewind™ 1 GHz Splitters HR S2p Tradewind™ 2 GHz Splitters HR S6p tspl-2 2-way $ .75 hr s2 2 GHz 2-way Splitter $ 2.25 Tradewind™ 2 GHz Power Passing Splitters tspl-3 3-way $ 1.25 hr s3 2 GHz 3-way Splitter $ 3.90 hr s2p 2 GHz 2-way Splitter $ 2.70 tspl-4 4-way $ 1.34 hr s4 2 GHz 4-way Splitter $ 5.25 hr s3p 2 GHz 3-way Splitter $ 4.50 tspl-6 6-way $ 2.57 hr s6 2 GHz 6-way Splitter $ 7.00 hr s4p 2 GHz 4-way Splitter $ 5.50 tspl-8 8-way $ 3.12 hr s8 2 GHz 8-way Splitter $ 8.99 hr s6p 2 GHz 6-way Splitter $ 7.50 tspl-12 12-way $ 13.00 hr s8p 2 GHz 8-way Splitter $ 9.50 tspl-16 16 way $ 21.00 Splitters 4 Splits signal levels between outlets 4 Can be used to combine signals 4 Light weight metal housing 4 Grounding screw hr s2v hr s6v Tradewind 2 GHz Vertical Splitters ™ vsd3wsp vsd8wsp ViewSonic 1 GHz Splitters vsd2wsp 2 - Way $ 1.70 vsd3wsp 3 - Way $ 2.30 vsd4wsp 4 - Way $ 3.00 vsd6wsp 6 - Way $ 8.00 vsd8wsp 8 - Way $ 9.00 38 hr s2v 2-Way $ 2.90 Tradewind™ 2 Gig Drop Grade Diplexer hr s3v 3-Way $ 4.50 DPLX2g-DG hr s4v 4-Way $ 6.75 hr s6v 6-Way $ 8.50 hr s8v 8-Way $ 10.75 Used for indoor distribution network configuration. 1 GHz bandwidth with low loss characteristics allow for advanced services that require more bandwidth. 4 EMI isolation 4 Vertical connections for distribution panels 4 Splits signal unevenly from trunk output 800 444 7223 | www.paceintl.com $ 1.70 4 Used for combining VHF/UHF & Satellite Don’t see what you are looking for? Call our expert sales staff for additional models of splitters and taps! Signal distribution twtv4a-20 Tradewind™ 1 GHz Taps twhr-120 1-Way, 20 dB $ 5.50 twhr-210 2-Way, 10 dB $ 6.50 twhr-212 2-Way, 12 dB $ 6.50 twhr-215 2-Way, 15 dB $ 6.50 twhr-220 2-Way, 20 dB $ 6.50 twtv4a-08 4-Way, 8 dB $ 4.50 twhr-225 2-Way, 25 dB $ 6.50 twtv4a-11 4-Way, 11 dB $ 4.50 twhr-230 2-Way, 30 dB $ 6.50 twtv4a-20 4-Way, 20 dB $ 4.50 twhr-412 4-Way, 12 dB $ 9.50 twtv8a-11 8-Way, 11 dB $ 9.99 twhr-416 4-Way, 16 dB $ 9.50 twtv8a-14 8-Way, 14 dB $ 9.99 twhr-420 4-Way, 20 dB $ 9.50 twtv8a-17 8-Way, 17 dB $ 9.99 twhr-424 4-Way, 24 dB $ 9.50 twtva8a-20 8-Way, 20 dB $ 9.99 True-Spec UHF/VHF Separator Joiner uvsj Call for Pricing Tradewind™ 3 GHz Attenuator twfam1g-* $ 1.00 Taps Used for indoor distribution network configuration. 1 GHz bandwidth with low loss characteristics allow for advanced services that require more bandwidth. 4 EMI isolation Reduces RF signal strength to reduce inter modulation caused by high input levels. Not power passing. 4 Available in 3, 6,10, 16, and 20 dB 4 Vertical connections for distribution panels 4 Nickel plated brass construction 4 Splits signal unevenly from trunk output 4 Works for satellite systems True-Spec One Port Directional Couplers tscw-6, tscw-9, tscw-12, tscw-16,tscw-20, scw-24, tscw-27, tscw-30 Call for Pricing Tradewind™ 3 GHz Power Passing Attenuator twfamp2g* $ 1.50 Reduces RF signal strength to reduce inter modulation caused by high input levels and to reduce satellite signals to their desired range. Allows DC power pass. 4 Available in 3, 6, and 10 dB twtv4a-20 4 Nickel plated brass construction Tradewind 2 GHz Taps ™ 4 Works for satellite systems twhr-108 1-Way, 8 dB $ 5.50 twhr-110 1-Way, 10 dB $ 5.50 twhr-112 1-Way, 12 dB $ 5.50 twhr-115 1-Way, 15 dB $ 5.50 4 DC power pass up to 200 mA of current True-Spec One Port Taps tsc-6, tsc-9, tsc-12, tsc-16, tsc-20, tsc-24, tsc-27, tsc-30 Call for Pricing 800 444 7223 | www.paceintl.com 39 Signal distribution 312t-29 314t-08 Tradewind™ 2-way Power Passing Hardline Taps 313s Tradewind 4-way Power Passing Hardline Taps ™ $ 12.00 Hardline 312t-04 $ 11.00 314t-08 312t-08 $ 11.00 314t-11 $ 12.00 312t-11 $ 11.00 314t-14 $ 12.00 312t-14 $ 11.00 314t-17 $ 12.00 312t-17 $ 11.00 314t-20 $ 12.00 312t-20 $ 11.00 314t-23 $ 12.00 312t-23 $ 11.00 314t-26 $ 12.00 312t-26 $ 11.00 314t-29 $ 12.00 312t-29 $ 11.00 4 Superior interwoven RFI gasket shielding 4 Pedestal or areal mounting 40 312s 2-Way $ 27.50 313s 3-Way $ 27.50 Tradewind™ Hardline Directional Couplers 2-way and 4-way power passing aluminum hardline taps are used for distribution network configuration. 1 GHz bandwidth with low loss characteristics allow for advanced services that require more bandwidth. 4 Anti-corrosive 360 aluminum housing 4 Captive stainless steel hardware Tradewind™ Hardline Splitters 311dc-16 6 dB $ 27.50 311dc-08 8 dB $ 27.50 311dc-12 12 dB $ 27.50 314t-08 Tradewind™ 8-way Hardline Taps - Power Passing 318t-11 Terminated $ 22.80 318t-14 Insertion - 4.7 dB $ 22.80 318t-17 Insertion - 3.3 dB $ 22.80 318t-20 Insertion - 2.3 dB $ 22.80 318t-23 Insertion - 2 dB $ 22.80 318t-26 Insertion - 1.5 dB $ 22.80 318t-29 Insertion - 1.5 dB $ 22.80 800 444 7223 | www.paceintl.com Tradewind™ Hardline Power Inserter 311pi $ 27.50 Signal distribution Splice Coupler si412k3 P3 .412 Splice Coupler $ 14.00 si500k3 P3 .500 Splice Coupler $ 13.00 si625k3 P3 .625 Splice Coupler $ 11.25 si750k3 P3 .750 Splice Coupler $ 25.00 Entry to F Female $ 3.50 f625e Housing Terminator $ 8.25 625trbV Ai625ffk3 BAFF Connectors P3 .412 to F female BAFF $ 10.00 AI500FFK3 P3 .500 to F female BAFF $ 13.00 AI540FFK3 P3 .540 to F female BAFF $ 10.37 AI625FFK3 P3 .625 to F female BAFF $ 14.70 AI750FFK3 P3 .750 to F female BAFF $ 20.75 accbaff Pin connector to "F" Female Omega II - AC-Only Power Supply Housing to Housing Coupler ete625lr Housing to housing coupler $ 7.99 Right Angle Adaptor ei625k3 Pin Connectors eu90 Right Angle Adaptor ei412k3 P3 .421 Entry Pin $ 8.40 ei500k3 P3 .500 Entry Pin $ 5.50 ei500Q3 QR .500 Entry Pin $ 9.22 ei625k3 P3 .625 Entry Pin $ 7.00 ei750k3 P3 .750 Entry Pin $ 10.00 Universal Housing Splice Block $ 10.99 hsb acc-15chtiou $ 6.00 Housing splice block universal $ 8.00 px-5200-06 6 Amp. $ 320.00 px-5200-15 15 Amp. $ 335.00 The Omega II power supply is a non-standby AC only power supply designed specifically for powering CATV and broadband distribution systems. The power supply consists of a ferro resonant transformer, UL listed 20 Amp AC circuit breaker, input transient protection, 115 /230 Vac output utility receptacle for power supply use only (not as a convenience outlet) and an optional Time Delay Relay and Output current meter. The Omega II power supply is enclosed in a weatherproof cabinet, secured by a keyed lock. The cabinet comes with a bracket for pole mounting or an optional pedestal for ground placement. An indicator lamp is provided on the unit to indicate the unit is operating normally. The Omega II power supply is designed to deliver a 60 Vac or 90 Vac regulated output voltage from a 115/230 Vac/60 Hz input. (Optional 115.230 Vac/50 Hz input). $ 12.00 4 Flexfeeder to Pin connector 800 444 7223 | www.paceintl.com 41 Hardline AI412FFK3 Signal distribution DIRECTV® & DISH Network APPROVED! Split Bolts 2.8 GIG Dual Ground Block 2 Lugs gb2g-1 $ .30 gb2g-2 $ .60 gb2g-4 $ 1.25 Used to connect (splice) coaxial cable F connectors and to connect ground cables to other components. Noncorrosive. Compatible with all satellite delivery systems: DirecTV, DISH Network, and C-Band. Also compatible with all cable TV and off-air services. 4 Barrel connectors with ground lugs sb4 #4 split bolt $ .65 Bounding Corner sb6 #6 split bolt $ .62 TCSC51-CF Split-Bolts allow you to share the house ground with cable TV and satellite grounding systems. High clamping force ensures that a solid connection is made for maximum conductivity. No. 4 split bolts are suitable for use with 8~4 AWG ground wire. No. 6 split bolts are suitable for use with 10~6 AWG ground wire. 4 High clamping force $ .70 4 Stainless steel 4 No. 4 split bolts are suitable for use with 8~4 AWG ground wire Grounding 4 Blue insulating end cap identifies satellite compatibility 4 No. 6 split bolts are suitable for use with 10~6 AWG ground wire 4 Noncorrosive metal construction 4 UL listed #KDSH.E224839 Ground Straps 4 UL listed #E224839 DIRECTV® & DISH Network APPROVED! a-24-6 6" ground strap $ .33 a-24-12 12" ground strap $ .35 4 Flexible construction 4 Pre-holed adjustable length strip 4 Grounding screw Meter Box Corner Clamp $ .75 ch-corner 4 Allows a fixed & positive contact without interference 4 Works with ground wire 4 Side-mount meter box Water Pipe Ground Clamp ch-clamp $ .39 Glavanized Ground Straps Used to connect ground cables to metal pipes. It will securely grip water pipes up to one inch in diameter, and accepts 6–12 gage wire. 4 Single ground lug 4 Noncorrosive metal construction 4 For pipes up to 1” 4 UL listed #E224840 42 800 444 7223 | www.paceintl.com 6" ground strap $ .29 TCGGS-12 12" ground strap $ .32 4 Flexible construction 3/8” Ground Clamp CH-3/8RODCLAMP TCGGS-6 $ .59 4 Pre-holed adjustable length strip 4 Grounding screw Signal distribution 4' Ground Rod gr-4 $ .99 Ground rod for use when grounding earth ground. Overall length is 4ft. Constructed from copper covered steel. 4 Pre-installed ground clamp 4 Sharp edge for easier insertion Ripley Security Sleeve Tool $ 11.00 s-200 Also works great to tighten or lossen F connectors in small work spaces. Features durable machinedheat-treated steel. 4 Tool is 2.73’’ long Low/High Pass Filters 4 A variety of low, high-pass and single channel deletion filters are available in this style. Call today to talk to our expert sales staff. 4 UL listed #KDSH.E224839 Lock Box with Front Cover Lock Terminate Tool 10GA Ground Wire 10solgrn $ 125.00 ltt-4 4" $ 11.00 ltt-7 7" $ 12.00 4 Solid steel spring ears apb1218 12" x 18" x 8" $ 68.00 apb1824 18" x 24" x 8" $ 89.00 apb2626 26" x 26" x 8" $ 114.00 4 Durable, long lasting & easy to use 4 500 foot reel 4 Green color insulation 4 Solid copper conductor Lock Box Lock Bracket Notch Filters ETN/emn-* Security Shield ss-1d $ .20 Call for Pricing 4 A variety of low, high-pass and single channel deletion filters are available in this style. Call today to talk to our expert sales staff. APLB $ 2.48 4 Pad for use in lock box 4 Set includes bolt and nut 4 Necessary with lock box Security shields are used to protect “F” connectors on taps, splitters, converters and ground blocks from unwanted tampering. 4 Die cast brass 800 444 7223 | www.paceintl.com 43 Grounding ltt-4 Signal distribution Use the EZ-RJ45® Crimp Tool with the EZ Connector below. You can find more about the EZ-RJ45 on p. 36, part # 100004. 100 Gardner Bender Coax Wire Staples $ 10.00 PSG-100 100 4" Black Cable Ties ct4-18cow white $ 1.35 ct4-18c9 black $ 1.35 FC-D 100 Fast Clips for Single Coax ct7-50cow white $ 1.65 ct7-50C9 black $ 1.65 Wire Management black $ 4.99 100 11" Cable Ties fc-s-wh white $ 4.99 CT11-50COW white $ 3.50 CT11-50C9 black $ 3.50 4 Works with solid or stranded wire 4 FCC compliant, UL rated 4 Use in category 3, 5, 5E compliant data networks 4 Easy to verify wire sequence 4 Faster terminations fc-D black $ 5.69 100 14" Cable Ties fc-D-wh white $ 5.69 CT14-50COW white $ 3.50 CT14-50C9 black $ 3.50 white $ 4.63 100 24" Cable Ties CT24-175k9 4 Through holes allow wire pairs to be inserted through front of connector 4 Simple one piece design... no bars or liners fc-s 100 Fast Clips for Dual Coax $ .55 100003 100 7" Cable Ties FC-S Platinum Tools EZ RJ45 Connector 60 Gardner Bender Service Entrance Staples #6 6C Keystone Jack 310-106IV ivory $ 1.86 310-106wh white $ 1.86 310-106BK black $ 1.86 310-120or orange $ 2.50 310-120wh white $ 2.50 310-120bk black $ 2.50 310-120bl blue $ 2.50 $ 10.00 GSE-505 300-168 300-164 4 Conductor 6 x 8 RJ11 Modular Plug $ .10 300-164 8 Conductor 8 x 8 RJ-45 Modular Plug Adhesive Backed Cable Tie Mount acmb11c bag of 50 (white) $ 3.00 acnb11c-0 bag of 50 (black) $ 3.65 44 $ .19 300-168 800 444 7223 | www.paceintl.com CAT5E Keystone Jack Signal distribution DIRECTV® & DISH Network APPROVED! Base Phone T Adapter 310-420Iv ivory $ .46 310-420wh white $ .46 wp-1f-iv wp-2f-iv 200-254iv wp-1f-1ph-iv wp-2f-1ph-iv 310-110WH 310-202WH 310-203WH 310-204WH Extension Wireless Phone Jacks for Modems px441 Base & extension $ 39.00 px442 Extension only $ 25.00 4 Turns any AC outlet into a phone jack to which a modem may be connected 4 Avoids costly, time consuming, and difficult installations 4 Works with multiple set-top boxes, computers, or internet appliances Phone Cord Splice/Coupler 4 65,000 security codes for maximum privacy Wall Plates Wall Mounted Phone Jack $ .29 sj-4c Wall Phone Plate 300-094wh white $ 1.05 300-094iv ivory $ 1.05 White CAT5 Keystone Jack 310-420iv ivory $ .46 310-420wh white $ .46 wp-1f-wh White 3 Ghz Single F Plate $ .30 wp-1f-iv Ivory 3 Ghz Single F Plate $ .30 wp-2f-wh White 3 Ghz Dual F Plate $ .49 wp-2f-IV Ivory 3 Ghz Dual F Plate $ .49 200-254wh White Wall Plate with Hole $ .21 200-254IV Ivory Wall Plate with Hole $ .21 wp-1f-1ph-wh White 1-F/1 Phone Plate $ .40 wp-1f-1ph-iv Ivory 1F/1 Phone Plate $ .40 WP-2F-1PH-wh White 2F/1 Phone Plate $ .59 WP-2F-1PH-IV Ivory 2F/1 Phone Plate $ .59 Keystone Wall Plates (in white and ivory) 25 Foot Ivory Phone Cord 310-201* CAT5E Keystone 1-hole plate $ .97 310-202* CAT5E Keystone 2-hole plate $ .97 pc-25-iv $ .60 310-203* CAT5E Keystone 3-hole plate $ .97 PC-25-gr $ .15 310-204* CAT5E Keystone 4-hole plate $ .97 800 444 7223 | www.paceintl.com 45 Wall Plates $ .19 ph-coupler Signal distribution CyberPower 6-outlet Surge Protector $ 8.25 615 4 Protection from lightning induced surges and spikes 4 Designed for: personal computers, DVDs/Stereos, TVs and CD Players CyberPower 8 Outlet Surge Protector Tradewind TM Power Strip $ 24.95 880 Contents include 880 surge protector, 4’ coaxial cable, 6’ RJ-11 patch cord, as well as 6’ RJ-45 patch cord 4 8 surge protected outlets 4 Lifetime connected equipment guarantee up to $45,000 4 4 transformer spaced outlets 4 Includes: EMI / RFI noise filter, six surge protected outlets, 2 transformer spaced outlets, 4’ power cord with right angle plug 4 EMI / RFI noise filter Surge Protection 4 Mounting slots and brackets included 4 1 year limited warranty 6 Outlet Surge Protector CyberPower 8 Outlet Surge Protector $ 34.95 4 6 surge protected outlets 890 4 1 transformer spaced outlet Contents include 890 surge protector, 4’ coaxial cable, 6’ RJ-11 patch cord, as well as 6’ RJ-45 patch cord 4 8 surge protected outlets 4 4' power cord 4 Keyhole mounting slots 4 $ 20,000 connected equipment warranty 4 4 transformer spaced outlets 4 Lifetime warranty 4 EMI / RFI Noise Filter 4 6' power cord 4 Keyhole mounting slots 4 $ 200,000 connected equipment warranty 4 Lifetime warranty 46 800 444 7223 | www.paceintl.com 12 Outlet Metal Power Strip, 4feet in length. Perfect for use with: Electronics, Computers, Audio/Video, Appliances and Power Tools. 4 6 ft. 14/3 AWG, SJT power cord 4 Surge protection up to 400 joules 4 Keyhole mounting slots 4 Lifetime warranty $ 8.95 $ 30.00 4 Master on/off switch with15 amp resettable circuit breaker 4 6' power cord 4 $ 100,000 connected equipment warranty 610 PS-48 AUDIO/VIDEO Digital Mixers 48 Amplifiers 49-50 iR Control 51-52 Audio / Video cables 53 Television mounts 54 Audio / video 4 Automatic Resonance Control (ARC) 4 Advanced new measurement and processing algorithm improves speech intelligibility and sound quality in facilities with challenging acoustic environments 4 Automatically identifies room mode frequencies and applies an inverse response curve to compensate for the measured room response 4 Modular design allows versatile configurations — up to 8 inputs and 8 outputs (modules not included) 4 Essential audio processing tools — compressors, gates, crossovers, multi-band filtering, parametric, high/low-pass, all-pass and notch filters, horn EQ, high/low shelving and output delay 4 Eight bus matrix allows flexible input-to-output signal routing for zoning or room-combining TOA Modular Digital Mixer ® DPk1 Call for Pricing Digital Mixers The DP-K1 DIGITAL MIXER / PROCESSOR is the ideal solution for a wide variety of installed sound applications including houses of worship, sports facilities, convention centers, airports, and many others. The DP-K1’s modular design supports up to eight mic/line inputs and eight line outputs with flexible contact-closure remote control. The advanced new Automatic Resonance Control (ARC) measurement and processing algorithm from TOA, improves speech intelligibility and sound quality in facilities with challenging acoustic environments. ARC automatically identifies room mode frequencies and applies an inverse response curve to compensate for the measured room response. Additional audio processing tools include multi-band parametric filters, compressors, limiters, noise gates, crossovers, delays and ore. Full input-to-output matrixing allows users to store and recall any input to output combination for multi-zone or room-combining applications. The unit is programmed via PC control software and includes a built-in network interface for remote access. The DP-K1 is covered with a five year product warranty. 4 Rack-mount digital mixer / processor for installed sound applications such as houses of worship, sports facilities, convention centers, airports, and others 48 TOA® 9000 Series Digital Matrix Mixer/Amplifiers a-9060dh 60 WATT Call for Pricing 4 Network interface for remote programming and maintenance a-9120dh 120 WATT Call for Pricing 4 PC software for offsite programming and archiving settings m-9000 240 WATT Call for Pricing 4 Flexible remote control Optional module a-9060dh 4 Up to twenty-four programmable switch inputs for activation of memory, volume up/down, channel on/off and stereo input selection 4 Up to sixteen programmable relay outputs for activate during memory, channel on/off, input status and stereo input selection 4 8 internal memories for storage and recall of different signal routing and parameter configurations 4 Input and output channel metering 4 Eight front panel memory select buttons 4 Front panel lock protects settings 4 Cooling fan ensures continuous reliable operation 4 Flexible mixer/amplifiers for sound reinforcement, paging and background/foreground music distribution 4 Six switchable Mic/Line inputs, balanced, with mic trim and switchable 24 VDC phantom power 4 Two auxiliary inputs, unbalanced, with dual-RCA jacks 4 900 series module slot accepts 900 series plug-in modules for custom system configurations 4 25 V, 70.7 V and 4 ohm speaker outputs 4 Transformer isolation for telephone paging (Input #1) 4 User configurable auto-mute function with sensitivity adjustment 4 Five-segment LED power meter 4 Built-in rack-mount brackets (3 RU) 4 Remote master volume (via 10k OHm pot) and remote turn-on 4 Five year warranty 4 Insert jacks for connecting external signal processor Pace Electronics stocks a broad range of Toa® products. To find out more call us or visit online! 800 444 7223 | www.paceintl.com 4 Protection circuitry prevents potential damage from overloads, short-circuit and overheating 4 Five year warranty Audio / Video bg-1015 A-912MK2 a-724 TOA® 6-Channel Mixer/Amplifiers TOA® 8-Channel Mixer/Amplifiers TOA® 9-Channel Mixer/Amplifiers a-706 60 WATT $ 390.00 a-903MK2 30 WATT $ 290.00 bg-10 10 WATT $ 155.66 a-712 120 WATT $ 442.00 a-906MK2 60 WATT $ 416.00 bG-1015 15 WATT $ 166.00 a-724 240 WATT $ 593.00 a-912MK2 120 WATT $ 501.00 bg-1030 30 WATT $ 239.00 bg-1060 60 WATT $ 338.00 bg-1120 120 WATT $ 369.00 4 Flexible mixer/amplifiers for sound reinforcement, paging and background/foreground music distribution 4 Modular design allows fast and easy custom configurations for unmatched flexibility 4 Six switchable Mic/Line inputs, balanced, with mic trim and switchable 24 VDC phantom power 4 Eight module slots accept any combination of TOA plug-in modules 4 Two auxiliary inputs, unbalanced, with dual-RCA jacks 4 25 V, 70.7 V and 4 / 8 ohm speaker outputs 4 Integrated mixer/amplifiers for sound reinforcement, paging and background/foreground music distribution 4 900 series module slot accepts 900 series plug-in modules for custom system configurations 4 Dual mute bus permits multiple levels of paging priority using optional mute-type modules 4 25 V, 70.7 V and 4 ohm transformer-isolated speaker outputs with screw terminal connector and protective cover plate 4 25 V, 70.7 V and 4 ohm speaker outputs 4 Remote master volume terminals for control with an external 10k ohm linear-taper potentiometer 4 Two low impedance microphone inputs, balanced, transformer-isolated with XLR-F connectors (expandable to 4) 4 Low cut switch to limit low frequency response 4 Three auxiliary line inputs, unbalanced with RCA connectors 4 Auxiliary output for connecting an external mixer or recording device 4 Hi-z mic/phono input (switchable), unbalanced with RCA/ screw terminal connectors 4 Insert jacks for connecting external signal processing 4 External mute terminals for switch closure override of inputs 3-5 with adjustable mute depth 4 Transformer isolation for telephone paging (Input #1) 4 User configurable auto-mute function with sensitivity adjustment 4 Five-segment LED power meter 4 Remote master volume (via 10k OHm pot) and remote turn-on 4 Insert jacks for connecting external signal processor 4 Bridging input/output for input expansion or system combining 4 Protection circuitry prevents potential damage from overloads, short-circuit and overheating 4 Protection circuitry prevents potential damage from overload, short-circuit and over-heating 4 Booster and tape outputs for connecting external equipment 4 Five year warranty 4 Five year warranty 4 +24 VDC input for connection to external power source 4 Insert jacks for connecting external signal processor Amplifiers 4 Protection circuitry prevents potential damage from overload, short-circuit and overheating 4 Five year warranty 800 444 7223 | www.paceintl.com 49 Audio / video Xantech® 291 Series Hidden Link IR Receivers p-912mk2 TOA® Power Amplifiers TOA® Network Audio Adapter p-906mk2 60 WATT $ 361.00 nx-100 p-912mk2 120 WATT $ 437.00 p-924mk2 40 WATT $ 760.00 The NX-100 Network Audio Adapter can transmit high-quality audio signals and such control data as serial data over IP networks, such as LAN or Internet, in real time. It is especially useful when transmitting audio signals to remote locations, as Internet use keeps running costs lower than the use of dedicated lines. With the use of an optional rack-mounting bracket, it can be mounted in an EIA Standard rack (1 unit size). 4 Modular single-channel power amplifiers 4 Input module slot accepts most TOA plug-in modules for custom system configurations 4 25 V, 70.7 V and 4 / 8 ohm speaker outputs $ 1,024.86 The 291 series are small, shelf-top IR receivers with a multitude of applications. Use them as an inexpensive method of repeating IR commands when wall mounting an IR receiver is not practical. As with all Xantech IR receivers, the 291 can tie into multi-room IR extension systems. 4 Attractive case for shelf-top locations 4 Red talk-back LED tests system for correct wiring as well as indicating infrared reception 4 781RG Power Supply required 4 Nominal reception angle: 45 degrees off axis 4 Attached 7 foot cable and 3.5 mm stereo mini plug permits direct plug-in to Xantech connecting blocks 291-10R/P 4 Direct input for connecting an external mixer or other source $ 37.71 4 Selectable input sensitivity to accommodate high or low input levels 4 Use for general applications. Includes a CB12 Connecting Block 4 Low cut switch to limit low frequency response 4 IR modulation frequency bandwidth: 30–100 kHz 4 Protection circuitry prevents potential damage from oveload, short-circuit, or over-heating 4 Nominal reception range: > 30 feet 291-80 4 Five year warrant $ 60.57 4 CFL/LCD Friendly IR Receiver Dual Microphone/Line Input Module $ 111.71 D-001t 4 This version of the 291 has been specifically designed to have great immunity to many sources of infrared interference and to have exceptional reception range 4 IR modulation frequency bandwidth: 30–60 kHz 4 Adjustable IR carrier frequency: 32 to 56 kHz 4 Nominal reception range: > 70 feet Amplifiers Xantech® Xtra Link2 Package Digital Sound Level Meter 33-2055 172-94/RP $ 56.82 4 For precise, accurate sound readings 4 Ideal for fine-tuning the audio response on your PA or stereo system 4 3 digit sound level readout with 21-dot analog bar for pinpoint accuracy 50 Telephone Zone Paging Module $ 99.57 zp-001t 800 444 7223 | www.paceintl.com $ 55.71 The complete 172 Xtra Link2 package includes 291 Infrared receiver, injector, coupler, 284M Dual Blink IR Infrared emitter, 781RG DC Power Supply, two Coax jumpers with RF connectors. Audio / Video Xantech® 780 Series J-Box Receivers $ 171.43 780-95 J-Box IR Receiver. The 780 has been the choice of custom installers for years. Use it for general applications at lowest costs. 4 Plasma Friendly J-Box IR Receiver 4 Rejects interference from plasma displays, direct sunlight and fluorescent tube lights Xantech® Dinky Link 4 Range: 50 feet 4 Has talk-back LED for system testing 4 Works in normal three-wire mode requires 781RG Power Supply 480-80b $ 72.00 480-80w $ 72.00 4 Non-visible, high output version 480-85s $ 80.00 4 New deep purple Lexan shell 480-85b $ 80.00 4 New improved clear adhesive film included on emitter housing for attachment to IR window of controlled device Miniature IR receiver that features surface mount technology. The 480 Dinky Link was originally developed in response to requests from many of ourcustom installers for a small, inconspicuous receiver. It was designed for placement in very tiny spaces. One example is between the grille and baffle board of an in-wall speaker. The high sensitivity of this receiver gives you the ability to place the 480 behind a grille and still receive the IR commands up to 20 feet away. If longer range is necessary, you must drill a 3/8-inch hole in the grille. 4 Extremely small package, 7/16" x 5/16" x 2-5/16" (11mm x 8mm x 59mm) Xantech® IR Blaster $ 34.29 380-20 Xantech® Mouse Emitter 4 Works in normal 3-wire mode 282-m/rp $ 8.00 4 Lead is terminated with a 3.5mm mono mini plug 4 Length of wire: 10 feet Xantech® Dual Mini Emitter 284m $ 9.14 Two emitters in series with each other and terminated in a single 3.5mm mono mini plug 4 Length of wire: 7 feet to junction, 3 feet to each emitter 4 Non-visible, high output version 4 Talkback red LED tests system for correct wiring as well as indicating infrared reception 4 Available in white or black 4 SUN480 Sunscreen filters available separately. Use these to help with sunlight and stray IR problems Xantech® Micro Link Lynx Broadband Video Over CAT5E Cable 040-0139 AV/IR CAT5X-Mitter $ 55.00 040-0153 AV/IR CAT5 Receiver $ 55.00 Xantech® Smart Pad 12 Button Key Modulator $ 36.57 KM-1F 4 It can be used as a single-gang single-bank module or with source selecting modules for mechanical functions $ 70.86 490w-00 $ 72.00 Miniature IR receiver that features surface mount technology. The 490 has its electronics housed in a brass cylinder. The “business end” of the unit is a small round lens. This small receiver is designed to be placed in very tiny spaces. One example is a small corner of an equipment cabinet. 4 Standard version, with mini three-conductor 7 ft. ribbon cable and separate screw terminal block 4 12 basic control buttons 800 444 7223 | www.paceintl.com 51 IR Control The Bobcat -AVIR delivers composite video, stereo audio, and infrared control signals on Category 5 or Category 6 cable. It is ideal for sending satellite or cable TV from central satellite receivers (or cable set top boxes) to remote TVs using the structured cabling system rather than coax. The infra-red return path sends channel selection and other remote control signals back to the set top box. 490-00 Audio / video Xantech® Controlled AC Outlet Xantech® Six-Way A/V Distribution Amplifier $ 72.00 AC1 Control voltage switched outlet. Can be used for AC power management with the control output of any low voltage DC source. $ 70.86 AV 61 AV 61 gives you the ability to split stereo audio and video signals six ways without any splitter loss. It also prevents audio distortion by buffering the sources from the loading effects of several AV receivers or preamps in a zoned system. One Zone Connecting Block 789-44 $ 26.29 4 Connects four emitter ports and power supply to all Xantech infrared receivers and keypads 4 Four parallel emitter ports with 470 Ohm resistors drive four single or four dual emitters 4 Quick-connect stereo mini jack for IR Receivers that use a stereo mini plug 4 STATUS terminal for connection of IR Receivers and Keypads that have status indicator LED’s 4 2.1 mm coaxial power jack 4 Uses either the 781RG or 782-00 power supply 4 Dimensions: 3” x 1 3/4” x 13/16” (77mm x 45mm x 21mm) Xantech Remote Gain Control Modulator ® rgc11 $ 96.00 4 Remote controlled line level gain control $ 96.00 Mirv1I 4 Ramping volume and/or preset level adjustments 4 Includes plug-in type screw terminals for IR bus connections. 4 Separate mute on and off 4 Servo action causes multiple MIRV1’s to automatically track each other’s position 4 Loop-through jacks for ‘daisy chaining’ multiple RGC11’s 4 Selectable IR code groups 4 Useful for controlling multiple power amplifiers from a single preamp 4 Gain: Unity @ Max. V.C. 4 Freq. Response: 5 Hz to 70 kHz ± 3 dB 4 THD: < 0.01% @ 2V out, IEC ‘A’ weighted 4 S/N Ratio: > 96dB re 2V out 4 Requires RC68+ Programmer IR codes for operation 4 LED in knob blinks with knob rotation and also serves as a system ON/OFF status indicator 4 One nut disassembly for custom painting 4 Knob and plate pre-finished in either white (MIRV1-W) or ivory (MIRV1-I) 4 Fits standard single gang J-box 781-RG $ 9.14 4 Regulated 12V DC for most Xantech remote control devices (marked rating is 12V DC, 200 mA) 4 Powers basic Xantech IR systems 4 Uses 2.1mm coaxial plug High Current Power Supply 782-00 $ 29.71 4 Regulated, 12V DC, 1.2 Amp power supply 4 Depth behind plate: 2-1/8 inches (54mm) 4 High current supply designed to power a large number of Xantech devices from a single power supply 4 Power: Receives 12V power from RAT1 4 Uses 2.1mm coaxial plug 4 Includes AC power supply IR Controls 4 Dimensions: 5-7/8” x 2-3/4” x 1-5/8” (150mm x 70mm x 42mm) 52 Power Supply Xantech® Motorized IR Volume Controller 800 444 7223 | www.paceintl.com &(&.',' 16;<)44-:;<15-)6,576-A;--8)/-%7-);14A ;<7+3 16>-6<7:A 57=6<; 5)A )4;7 *- 7:,-:-, ;-8):)<-4A.:75<0-?)44):58)/- ! > 3035&0%'/356-09)5 > "34%2(*532753003874537)'7-32 > (.867%&0)7-078473@%2(@6:-9)0 > 38271%<&)-267%00)(-27:36)'7-326%003:-2+ *35%32)4)5632-267%00%7-32 > !-2+0)35(38&0):%00%51()4)2(-2+32132-7356-=) > # #1382761%<&)%(()(%*7)5132-735-6-267%00)( DVI Cable > 2'08()6,%5(:%5)*35-267%00%7-3273:33(678(6 Tradewind™ 1 Female RCA to 2 Male RCA ch-dvi-6 6 ft 1fr-2mr 6 ft $ .48 Tradewind™ 1 1mr-2fr $ .48 *-7 Tradewind™ 2-RCA Jacks - 3.5 Stereo Plug 255-038 6 ft Audio Cable 255-131 3 ft 12 ft 4 Red and white connectors with Gold Fittings S Video Cable *-7 *-73 LBS jmw26* "LACK CM CM CM CM KG 3INGLE 3INGLE LBS CM CM CM CM KG 3INGLE CM CM CM Tradewind™CM Stereo Audio/Video Cable 3INGLE avs-6 3INGLE CM 6 ft CM CM CM CM CM Sterens® Stereo Audio/Video 3INGLE *-73 *-7$ 3INGLE CM CM KG "LACK CM CM CM CM CM CM LBS CM CM CM CM KG LBS KG *-7$3 3INGLE CM CM LBS CM CM CM CM KG $OUBLE LBS CM Woofer Cable $OUBLE CM Sub *-7(3 *-7 *-73 *-7(3 $ 1.20 *-7( *-7(3 *-7( *-7(3 $ .50 *-7( *-7(3 CM CM 12 ft CM CM KG KG LBS 4 Top and front roll out protection 3ILVER 4 Adjustable tilt up to 30° and 360° swivel "LACK in two sections allowing for a 4 Mount may be installed one-person installation 3ILVER 4 Single or double wall arm, depending on monitor size "LACK 4 (38&0):%00%51%6237)( VCR/DVD mounts may be added after monitor is installed 3ILVER 38276 6,-4 :-7, &5%'/)7 6-2+0) 35 4 Includes hardware for installation to wood studs '1B51C?/>11:?5F185?@5:3?B1>52E41534@ -:0 C50@4 01@1>95:1 9;018 >1=A5>10 3INGLE LBS ;:@-/@A?@;91>->152E;A>1=A5>14 12 Foot CM Heavy DutyCM Sub WooferCM Cable with RCA ends. CM KG Wood Stud: ?5F19;0525/-@5;:@;25@E;A>9;:5@;> 3INGLE LBS 3ILVER CM CM CM CM KG 125 lbs (56.7kg) ,;;0?@A0?$;@45:3-005@5;:-8>1=A5>1052 (single wall arm) $OUBLE LBS "LACK300 lbs (136.1 kg) 9;A:@5:305>1/@@;C;;0?@A0? '1B51C (double wall arm) CM CM CM CM KG -//1??;>EC-88?A<<;>@<8-@1?52?<-::5:3 $OUBLE LBS 3ILVERMetal Stud: C;;0?@A0?<-31 CM CM CM CM KG 125 lbs (56.7kg) ;:/>1@1 (single wall arm, with use of wall support plate, page 63) '1=A5>1? 2-?@1:1>? $OUBLE LBS "LACK <-31 (double wall arm with use of wall support plate, page 63) CM CM CM CM KG 175 lbs (79.4 kg) $OUBLE LBS 3ILVER #1@-8?@A0?'1=A5>1?A?1;2-//1??;>E Concrete: HDMI CL2 Rated CM Cable CM CM CM KG C-88<8-@1@;?<-:?@A0?<-31 (single wall arm) $OUBLE LBS "LACK150 lbs (68 kg) hdpython20 20 ft $ 125.00 '1B51C -//1??;>E 85?@ 2;> +'+ CM CM CM CM KG 300 lbs (136.1 kg) (double wall arm with appropriate hardware) 9;A:@?(-21@E18@(1/A>5@E-?@1:1>? $OUBLE LBS 3ILVER A9<1>A->0?+501;;:21>1:/5:3(4182 CM CM CM CM KG ,-88(A<<;>@&8-@1?&;C1>A00EI;5?@ $OUBLE LBS "LACK CM CM CM CM KG 81/@>5/-8(@>5< :?@-88-@5;:);;8? $OUBLE LBS 3ILVER <-31 SW-12 CM 800CM 444 7223 | www.paceintl.com CM CM CM KG $ 14.00 KG Maximum Load "LACK 53 Audio/Video Cables 12 ft CM Wall Mounts have been used in commercial and educational environ- ments and can be seen in many high profile applications around the "LACK LBS CM 3INGLE *-7( Call for Pricing world. They provide unparalleled safety and strength in an attractive, low profile design. The monitor is completely surrounded and held in place by top and front roll out protection allowing for tilt up to 30°. LBS "LACK Model 2650 may be ordered pre-assembled to save installers time KG LBS 3ILVER and money. $ 1.56 KG 4 Color: black or silver CM ® Jumbo 2000® Wall Mount For 13” to 42” sets For years, Jumbo® 3ILVER 3ILVER $ 1.20 KG 3 ft CM CM Peerless Television Mounts LBS LBS $ 1.15 svhs-12 6 ft *-7 $ 1.10 *-7( 4 Two F connectors #OLOR 6 ft cj-6 22EACH 3HIP 7EIGHT 3INGLE $ .90 jmw2630-2650 4RAY $EPTH *-7$3 svhs-6 Coax Jumper $ 5.95 (EIGHT 2ANGE 206-273 *&".3'"''*/).- 255-120 Audio / Video 32'5)7) 0&6/+ ?5:381 C-88 ->9 0&6 /+ 0;A.81 C-88 ->9 C5@4 -<<>;<>5-@1 4->0C->1 <-31 46-ONITOR 3UPPORT 7IDTH 3CREEN3IZE !RM 2ANGE $ .63 *-73 *-7$ RCA-RCA Cable C-88 ?A<<;>@ <8-@1 <-31 0;A.81 C-88 ->9 C5@4 A?1 ;2 C-88 ?A<<;>@ <8-@1 <-31 )')57%-273',)'/%'78%0"#(-1)26-326:-7,&5%'/)76-=) Male RCA to 2 Female RCA-/$%, 6 ft :?@-881>&>;3>-9 1-@A>10&>;0A/@ 0&6/+ Model monitor screen size Support arm Width range hight range tray depth 13"-17" Single 13.5"- 21" 11.4"- 17.7" 10" 13"-17" Single 13.5"- 21" 11.4"- 17.7" 10" 19"- 21" Single 18"- 26" 14.2"- 20.4" 10" jmw2630 jmw2630s jmw2640 jmw2640s 38276,-46:-7,75%<%2(:%00%51 jmw2640d jmw2640ds jmw2650 jmw2650s jmw2650ds jmw2650h jmw2650hs jmw2655 jmw2655s jmw2660h > (.867%&0)*-;)(35*0%77-07-2+75%<6%6 237)(-2',%57 > 807-40)4)5*35%7)(,30)4%77)52*35 %77%',1)273*"#7375%< > 2'08()6*%67)2)56*35:33(678(13827-2+> 2'08()6*%67)2)56*35:33(678(13827-2+ C5@4 A?1 ;2 /;:/>1@1 -:/4;>? <-31 237)(-2',%57 )7%0!78(6 0&6/+ > 807-40)4)5*35%7)(,30)4%77)52*35 C5@4 A?1 ;2 91@-8 ?@A0? C-88 <8-@1 <-31 %77%',1)273*"#7375%< r-reach** 18" Black 18" Silver 18" Black 38276,-46:-7,75%<%2(:%00%51 Double 29"- 36" 24.2"- 30.4" 14" jmw2665h 27"- 36" Double 29"- 36" 19.2"- 25.4" 14" 37- Silver 7"4 7"4 25" Black jmw2665hs 27"- 36" Double 29"- 36" 19.2"- 25.4" 14" 25" jmw2670h 37"- 42" Double 34"- 41.3" 29.2"- 35.4" 14" jmw2670hs 37"- 42" Double 34"- 41.3" 29.2"- 35.4" 14" 25" 25" jmw2675h 35"- 42" Double 34"- 41.3" 24.2"- 30.4" 14" 25" Black jmw2675hs 35"- 42" Double 34"- 41.3" 24.2"- 30.4" 14" 25" Silver Television Mounts 54 lwb375t 4;;?1@>-E.-?10;:)+?/>11:?5F1 #1-?A>1 18" Silver .;@@;9.-?1;2)+@;1:?A>1@4-@@41.-?1C588 18"?5@2A88E;:@41@>-E Black Peerless® Slimline 18",;;0?@A0$;@45:3-005@5;:-8>1=A5>10 2E;A Wall Mounts Silver lwb530T Call for Pricing ->1?<-::5:3?@A0?>121>@;C-88?A<<;>@<8-@1? 22.5" Black <-31 LWB375t Call for Pricing 22.5" Silver 2 @41 8;-0 5? 81?? @4-: 8.? #1@-8 ?@A0 SWM310 Call for Pricing ;>01>@41-//1??;>E-:/4;>?<-31 22.5" Black The Slimline® Wall Mounts provide an alternative to the Jumbo 2@418;-05?9;>1@4-:8.?>121>@; -/$%, 46 4RAY 4RAY 2EACH 4ILT 3ECURITY 4RAY 3HIP -/$%, 46 4RAY 2EACH Mount for installations with limited space. These shelf style wall 22.5" Silver @4191@-8?@A0C-88<8-@1?<-31 3CREEN 7IDTH $EPTH 7EIGHT 3CREEN 7IDTH $EPTH mounts offer an attractive, low profile design that is unparalleled in 25";:/>1@1'1=A5>1?2-?@1:1>?<-31 Black ,7" strength CM CM ,7" CM .ONE 9ES LBS KG CM CM CM and safety. ;> )+? ;>01> /;:/>1@1 >1-0E ,7"4 CM CM ,7"4 CM 9ES LBS KG CM CM CM 25" Silver ,7" CM CM CM 9ES LBSCM KG CM ,7" .ONE CM 9;018?",;>",) ,7"#" CM CM CM .ONE 9ES LBS KG CM ,7"#" CM CM Black monitor 22.5"'121>@;-//1??;>E<-31?2;>+'+ ,7"4 Model CM CM CM tilt 9ES LBSCM KG CM tray tray ,7"4 CM screen reach security width depth 9;A:@?.A9<1>3A->0?@>-E1D@1:?5;:75@? CM CM 9ES LBSCM KG CM ,7"4#" CM size CM 22.5" ,7"4#" Silver -041?5B1?@A05:?@-88-@5;:75@?-21@E?@>-<? 37- CM CM 37- CM LBSCM KG CM CM 9ES 19"-20" 22" 13" 20.5" 10º lwb530t Yes 25"C-88?A<<;>@<8-@1?-:09;>1 Black 37- CM CM CM 9ES LBS KG 37- CM CM CM 30"- 36" **Distance from wall to center of swivel axis lwb530t jmw2660hs Color 25" lwb375t CM 25"-27" CM 24.25" CM CM 10.5" swm310 CM 9"- 13" CM Silver >;9 C-88 @; 2>;:@ 1031 ;2 @>-E '1/@-:3A8-> C-88 ->9 Black Maximum Load )-<1>10 C-88 ->9 SWM310 Silver C-88 ->9 )A.A8-> Wood Stud/Concrete: 50 lbs Metal Studs (w/ togglers) 35 lbs Metal Studs (wall plate) 125 lbs LWB375, Wood Studs 125 lbs Concrete: 125 lbs Metal Studs 125 lbs 800 444 7223 | www.paceintl.com ,3.3'"''*/).- jmw2650d 4;;?1@>-E.-?10;:)+?/>11:?5F1 #1-?A>1 19"- 21" 18"- 26" 14.2"- 20.4" 10" Single .;@@;9.-?1;2)+@;1:?A>1@4-@@41.-?1C588 ?5@2A88E;:@41@>-E 19"21" 18"- 26" 14.2"- 20.4" 14" Single ,;;0?@A0$;@45:3-005@5;:-8>1=A5>10 2E;A 19"- 21" 18"- 26" 14.2"- 20.4" 14" Single ->1?<-::5:3?@A0?>121>@;C-88?A<<;>@<8-@1? 25"- 27" 24"- 31" 19.2"- 25.4" 10" <-31 Single 25"27" ?@A0 24"- 31" 19.2"25.4" 8.? 10" Single #1@-8 2 @41 8;-0 5? 81?? @4-: ;>01>@41-//1??;>E-:/4;>?<-31 25"- 27" 24"- 31" 19.2"- 25.4" 14" Single 2@418;-05?9;>1@4-:8.?>121>@; 25"27" 24"- 31" 19.2"- 25.4" 14" Single @4191@-8?@A0C-88<8-@1?<-31 ;:/>1@1'1=A5>1?2-?@1:1>?<-31 25"27" 24"- 31" 19.2"- 25.4" 10" Double ;> )+? ;>01> /;:/>1@1 >1-0E 25"- 27" 24"- 31" 19.2"- 25.4" 10" Double 9;018?",;>",) 25"27" 24"- 31" 14.2"- 20.2" 14" Single '121>@;-//1??;>E<-31?2;>+'+ 9;A:@?.A9<1>3A->0?@>-E1D@1:?5;:75@? 25"- 27" 24"- 31" 14.2"- 20.2" 14" Single -041?5B1?@A05:?@-88-@5;:75@?-21@E?@>-<? 30"36" 29"- 36" 24.2"- 30.4" 14" Double C-88?A<<;>@<8-@1?-:09;>1 > (.867%&0)*-;)(35*0%77-07-2+75%<6%6 &.','*) C5@4 A?1 ;2 /;:/>1@1 -:/4;>? <-31 )7%0!78(6 0&6/+ Audio / video C5@4 A?1 ;2 91@-8 ?@A0? C-88 <8-@1 <-31 CM 9ESYes LBS KG CM CM 15" 37- 25" 10º CM .O LBS KG CM 7"4 CM 11.5" 14.5" 0º/5º/10º CM LBS 7"4 .OYes CMKG CM >;9 C-88 @; 2>;:@ 1031 ;2 @>-E '1/@-:3A8-> C-88 ->9 )-<1>10 C-88 ->9 )A.A8-> C-88 ->9 CM CM CM 53 4ILT .ONE .ONE .ONE TOOLS Hand tools Ladders / dollies 56-59 60 Power Tools 61-64 Bits / blades 65-67 Screws / anchors 67-68 Insulation / concrete 69 Stapling 70 Wire fishing 71-72 Sealants 73 Lights 74 Cleaning Tools 75 Safety 76 Test Equipment 77-79 Tools hb01106-g hb01001-6 Tradewind™ 13" Pry Bar tcpb13 Tradewind™ Multi Purpose Tin Snips $ 7.10 Lifetime Warranty $ 10.25 hb01093 4 Textured rubber grip handle 4 Spring action for fast, effortless cut 4 Full lifetime warranty hb01001-6 hb01004 Tradewind™ 12" Hacksaw Frame with Blade Tradewind™ 4" Long Nose Pliers hb0116-g tcscf $ 7.16 $ 4.20 Tradewind™ 6" Long Nose Pliers HB01001-6 $ 7.90 Tradewind™ 8" Long Nose Pliers HB01001-8 $ 8.10 Tradewind™ 8" Lineman Pliers hb01004 $ 7.66 4 Black rubber insert on handles for added grip Tradewind™ 10" Round Cable Cutter $ 9.83 hb01071 4 Heavy duty tool capable of standing up to the toughest cable 4 Textured rubber grip handle Tradewind™ Aluminum Close Quarter Hack Saw with 10" Blade tcmsa 4 Full lifetime warranty $ 4.84 4 Full lifetime warranty hb02008-10 Tradewind™ 6" Dry Wall Utility Saw tcwbc $ 2.95 hb02008-8 Tradewind™ Adjustable Wrench Tradewind™ 10" Groove Joint Pliers Hand Tools hb01126 4 Cushioned grips for added comfort $ 7.57 hb02008-10 10" $ 11.58 hb02008-8 8" $ 8.60 4 Full Lifetime Warranty 4 Dipped handle for added comfort 4 Fine Polished Chromium Nickel finish 4 Commercial grade tool 4 Full lifetime warranty PVC Pipe Cutter 153-P 4 Rigid Brand PVC Pipe Cutter 4 1¼" to 3½" Plastic Pipe Cutter 56 800 444 7223 | www.paceintl.com $ 115.00 Tools 3 lb. Sledge Hammer sl3 25 ft. Carpenters Tape Measure $ 14.50 tctm25 Stainless Steel Leatherman Tool $ 51.35 blast 4 15 tools in one 4 Magnet in the end of the tape to hold it securly in place when measuring! 4 Lists out the 1/8th" markings to make measurements quicker and more accurate 4 Needle nose/regular pliers Tradewind™ 16 oz. Rubber Mallet HB06006 $ 4.95 4 Leather Case $ 4.00 4 Wire cutter, Hard-wire cutter, Clip point knife, Saw, Wood/ metal file, Scissors, Large and small screw drivers, Phillips screwdriver, Ruler - 8" (19cm), Bottle & can opener, Wire stripper and lanyard ring Tradewind™ 2 Foot Scaled Level tclel24 $ 3.69 4 Light weight and durable Framing Hammer av20 $ 35.00 Stanley® 35 ft. Fat Max Measuring Tape $ 32.50 maxtape 4 Reinforced with a 3M industrial thermoplasatic coating for maximum durability and reduced blade breakage 4 1¼" wide Maylar® polyester film coated blade for superior durability and easy to read graphics Tradewind™ 16 oz. Claw Hammer Fiber Handle HB06003 800 444 7223 | www.paceintl.com 4 Light weight and durable chline $ 6.40 57 Hand Tools $ 12.00 protape $ 1.65 100' Chalk Line 30 ft. Carpenters Tape Measure $ 4.43 tctl9 4 Magnetic side $ 10.50 Irwin Straight-Line Plumb Bob 20877 4 11 ft. of tape standout for the longest reach Tradewind™ 9" Torpedo Level Tools Zircon TriScanner Pro Wall Scanner 6 Piece Screw Driver Set $ 23.75 tspsl 4 Deep scan to 11/2" deep $ 4.66 66-039 4 #1, #0, 1.4, 2.0, 2.4 and 3.0 mm Mechanical Tool Chest tchest $ 32.38 4 Clark 3 drawer all steel Tool Chest 4 Detects wood and metal studs 4 Tough powder coat finish 4 AC wire warning 4 One piece roll formed drawer runners 4 Spotlight pointing system 4 Lockable top patches and Strong carry handle in lid 22 Piece Hex Key Set $ 11.25 TCHR13 This is a heavy duty set of hex keys in the following sizes: 4 1/20", 1/16",5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1 /4", 5/16", 3/8" as well as 1.5, 2, 2.5, 3,4, 5, 6, 8, 10 mm. Crescent 70 Piece Professional Tool $ 46.50 scktset 4 Lifetime warranty 24" Double Traytote Bag 1141 $ 49.95 4 Features 37 pockets - 35 outside and 2 inside 4 Double 11" × 16" multi-compartment plastic trays slide securely into bottom of bag 4 Pockets for cordless drill, 2-way radio, drill bits, tips etc. 4 Bag dimensions: 24"L × 9"W × 12"H 4 Both SAE & Metric Sizes 4 1/4" & 3/8" Drives 4 72 tooth ratchets require only 5 degrees of swing Tool Bag Combo Stanley 3 Piece Wood Chisel Set $ 9.40 2107738 1107 $ 17.00 4 Includes one black and one tan tool bag 4 ½" - ¾" - 1" 4 Hardened for sharpening rwM rws Hand Tools Crescent 7 Piece Ratcheting Metric Wrench Set rwm 8mm - 18mm 12 Pocket Tool Belt $ 63.00 1429 Crescent 7 Piece Ratcheting SAE Wrench Set rws 5/16" - 3/4" $ 63.00 4 These unique wrenches require only 5 degree of swing to loosen or tighten nuts and bolts 58 20 Piece Screw Driver Set $ 19.60 60-220 800 444 7223 | www.paceintl.com $ 18.95 This heavy duty 12 pocket tool belt is sturdy and durable yet light weight. The roomy pockets have enough space to carry the tools and supplies you need on the job. Two hooks are included for hammers and one of the hooks swivels. There are pockets for your punches and screwdrivers as well as utility knives, nails, clips and fasteners. Tools 7" F-Connector Removal Tool $ 4.78 33-3085 3 Piece File Set $ 30.00 16070 Platinum Tools® Adjustable Punch Down Tool 4 Made for high density or hard to reach places $ 47.00 13006 Legendary German quality in this 8" hand file set. This 3 piece file set includes Bastard Cut and Second Cut files with comfortable plastic handles for long lasting reliability and ease of use. 4 The primary tool for all telecom and data communications installers 4 Simultaneously seats and trims wire in 110 and 66 style cross connects Tradewind™ Pick and Hook Set tc2ss Lifetime Warranty 4 Spring loaded for fast low effort wire seating and termination Tradewind™ 10" F-Connector Removal Tool $ 8.35 TW-10FR $ 2.35 This tool makes it easy to tighten or loosen F connectors in tight working spaces. 4 The extra long for those hard to reach connectors 4 Bayonet style blade retention mechanism is compatible with tools and blades manufactured by Harris, Ideal, and others 4 Adjustable low and high impact force settings 4 Spare blade storage compartment in the handle Tradewind™ Nail Punch Set 0079 /32" $ 6.00 /8" $ 6.20 3 0082 1 Tradewind™ Observation Mirror $ 4.80 tcom Platinum Tools® T-Handle Punch Tool $ 7.50 13110C 4 Lifetime warranty 154 Platinum Tools® BIX™ Style Blade 13022 Tradewind™ Cold Chisel a-7 3/4" wide $ 3.75 2-3/4" wide $ 209.00 $ 17.69 This wide and heavy carpet chisel is ideal for routing wires into the gap between base board molding and the carpet. Blunt edges will help protect base board finishes. 4 This is a handy device to make hiding cables an easier task Hand Tools 154 Stud Punch Tool 22280 Tradewind™ Carpet Chisel Call for Pricing 4 Punches 1 11/32" holes for 1" conduit 4 Punches 'H' studs without damaging flanges 4 Built-in stripper eliminates punch hang-ups 800 444 7223 | www.paceintl.com Platinum Tools 66 Style Punch Down Blade 13001 $ 13.95 59 Tools Tradewind™ Cable Caddie ch-caddie $ 24.00 4 Quick Setup 4 Great buy - get one for each of your trucks Little Giant All-in-One Ladder FM1506 $ 352.42 10103 Independent tests prove the Little Giant will replace 60-70% of all portable ladders currently being manufactured. When you buy a Little Giant, you're getting 24 different ladders combined to make the world‘s most versatile ladder system. Little Giant Type 1A Features: 4 Heavy duty aircraft-grade aluminum construction 4 Rated to hold up to 300 lbs. 4 Combines 24 different ladders into one convenient system 4 Lightweight and portable Louisville® Type 1A Fiberglass Step Ladder FM1504 4 ft. $ 121.80 FM1506 6 ft. $ 156.80 FM1508 8 ft. $ 225.00 FM1512 12 ft. $ 345.00 FM1414HD 14 ft. $ 515.00 4 Complies with all applicable OSHA ANSI A14.2 standards 4 Fiberglass construction 4 Made in the USA 4 300 lb. capacity, FM1414HD has the capacity of 375 lbs. 4 Includes a full Lifetime Warranty 4 Heavy gauge steel hinges 4 Double-rivet step construction 5 Spool B.E.S. Cable Caddie cc-1200 $ 225.00 Constructed of rugged 1" steel tubing. The Cable Caddy is 43" tall and can accommodate spools up to 16" wide on solid steel 1/2" axles. The Cable Caddy features 6 axle positions for unlimited versatility. Also features sturdy 7" rubber wheels. 4 Inside spreader braces 4 Polypropylene copolymer upper boot – Da Boot™ – thick non-marring thermoplastic elastomer rubber tread is bonded and mechanically fastened to the upper boot Forearm Forklift $ 33.01 7107493 Ladders/Dollies Tradewind™ Two Wheel Hand Truck Load Straps 1" × 14' High Strength 8104960 $ 5.65 4 One set (2 straps) of high strength ratcheting load straps 60 TCWT40 Shoulder Dolly $ 49.38 sdolly 4 Use your shoulders rather than your back to move heavy loads 800 444 7223 | www.paceintl.com $ 22.35 4 Tradewind two wheel cart 4 This a is heavy duty cart that works great both heavy and light but bulky boxes and equipment up to 250 lbs. 4 Solid tires Tools DeWalt Heavy Duty 7.2V Cordless Screwdriver Kit DW920K-2 Call for Pricing 4 Compact size & weight, only 3.0 lbs. DeWalt Heavy Duty ½" (13 mm) Reversible Right Angle Drill Kit DW120K Call for Pricing Includes: DW120 drill, chuck key, chuck key holder and kit box DeWalt 18 Volt Hammer Drill/Driver Kit dc988 Call for Pricing 4 Adjustable two-position handle 4 120VAC, 7.0 Amps 4 ¼" hex-drive quick release chuck 4 3 Speed 400/600/900 rpm, 9.75 lbs. 4 Extended life switch and electric brake 4 100% ball and roller bearings 4 DeWalt built high torque motor 4 Adjustable clutch torque control 4 5 position side handle 4 (2) XRP extended run time batteries Includes: driver, 1 hour charger, 2 XRP batteries, double sided screwdriver bit, side handle and carrying case. 4 Exclusive 3-speed transmission 4 Kit includes: DW920 screwdriver, charger, (2) batteries, screwdriver bits and kit box 4 1/2" ratcheting carbide jaw chuck 4 Maximum job site durability and reliability DeWalt Heavy Duty 1/2" 18 Volt Cordless Compact Drill/Driver Kit DC759KA Call for Pricing Includes: Drill/Driver, 1 hour charger, (2) 18 Volt battery packs, double ended screwdriver bit and kit box. 4 Compact size fits into the tightest conditions 4 High performance motor delivers 450 inch-pounds of maximum torque Includes: Drill, Saw, 2 XRP Batteries, 1 Hour charger, Screwdriver bit, Blade, side handle and carrying case. DC987 18 Volt Cordless ½" Drill/Driver: 4 High torque motor: 500 in-lbs maximum torque 4 3-Speed transmission DeWalt 18 Volt 4-Tool Combo Kit 4 ½" metal ratcheting chuck with carbide jaws dw4kit-2 Call for Pricing 4 DC385 18 Volt Cordless Reciprocating Saw 4 Heavy duty XRP ½" 18V Cordless Hammer Drill 4 Keyless blade clamp 4 Dual speed range for optimal performance: 0-450/0-1,500 RPM 4 0-2,900 spm 4 Heavy duty XRP 18V Cordless Reciprocating Saw with keyless blade clamp 4 1/2" single sleeve ratcheting chuck for tighter Bit grip 4 1" stroke length 4 Heavy duty XRP 6½" 18V Cordless Circular Saw 4 This tool complies with OSHA standards 4 Lever action keyless blade clamp 4 Heavy duty 18V Flexible Floodlight 4 Electric brake for greater control 4 2 Batteries, 1 hour charger and kit box 800 444 7223 | www.paceintl.com 61 Power Tools 4 Lightweight 5.2 lbs., minimizes user fatigue DeWalt 18V Cordless Reciprocating Saw and Cordless Drill Kit DC987KA Call for Pricing Tools DeWalt 7.2V - 18V 1-hour Vehicle Charger dw9109 Call for Pricing 4 The perfect companion for charging batteries on site. DeWalt 3/8" 18 Volt Right Angle Drill/Driver Kit DW960K-2 Call for Pricing dw9155 dw3578 DeWalt Carbide Blades for DeWalt Circular Saws dw9155 6½" $ 15.27 dw3578 7¼" $ 13.00 4 Dual range VSR 0-500 RPM / 0-1500 RPM, 4.7 lbs. 4 3/8" keyless ratcheting chuck 4 Multi-position rubber coated paddle switch 4 Fan cooled motor with electric brake 4 (2) High capacity XRP Batteries, extended run-time batteries Kit Includes: DW960 right angle drill/driver, 1 hour charger (input voltage 120VAC, 60Hz, 2.0 amps), (2) batteries, screwdriver bit and kit box. DeWalt Heavy Duty XRP 18V Battery dc9096 Call for Pricing 4 Fits all DeWalt 18 Volt cordless products DeWalt High Performance Saw Blades DW4802-25 $ 40.00 4 Bi-Metal reciprocating saw blades 4 25 Pack of 6"blades 6" DeWalt High Performance Bi-Metal Reciprocating Saw Blade DeWalt Corded Heavy Duty 1/2" Single Speed DW4802 Hammer Drill Power Tools dw511 Call for Pricing DeWalt Heavy Duty Electrician's Hole Saw Kit d180002 Call for Pricing 4 8 piece bi-metal hole saw kit 4 ¼", 7/16", 7/8", 11/8", 13/8", 1¾", 2", 2½" 62 800 444 7223 | www.paceintl.com $ 2.20 Replacement reciprocating saw blade for rough wood cutting Tools Bosch 10.8 Volt Screw Gun Bosch 10.5 Volt Drill Kit Call for Pricing ps20-2 Bosch 4 PC 18V Cordless Kit cpk40-18 Call for Pricing 4 (2) 10.8 Volt batteries with 30 minute charger 4 Quick Change Chuck 4 Circular saw 4 Adjustable clutch 4 Reciprocating saw 4 Variable speed trigger Call for Pricing PS10-2 4 (2) 10.8 Volt Litheon™ batteries with 30 minute charger 4 Carrying case 4 2 - 1.5" (38 mm) Power Drive bits 4 90º articulating head 4 Electronic clutch 4 Hammer drill 4 Variable speed control 4 Light 4 Blue Core baterries 4 Dual charger Bosch 30 Minute Dual Bay Charger bc230 Call for Pricing 4 Easy to read icons Bosch Variable Speed Jig Saw Call for Pricing 1584vs Bosch 18 Volt Drill/Hammer Kit 13618-se 4 Charges battery models: BAT025, BAT06, BAT031, BAT040, BAT 043, BAT045, BAT048, BAT100-BAT299 4 5.0 Amps 500-3,100 SPM Call for Pricing 4 (2) 18 volt batteries with 1 hour charger 4 Keyless chuck 4 Forward/Reverse 4 Tether hook 4 Side handle 4 Extra large soft sided case with 22 pockets 4 Low-vibration design - extremely smooth operation 4 4-stage orbital action - adjusts blade motion to match workplace and task BC004 4 Variable speed control 4 Rotating handle 4 3-position dust blower 4 Low position roller guide 800 444 7223 | www.paceintl.com BC006 Bosch 1-Hour Battery Charger bc004 Call for Pricing Bosch 1-Hour Automotive Battery Charger bc006 Call for Pricing 63 Power Tools 4 Adjustable clutch and variable speed trigger switch 4 Tool-less blade change system makes for fast and easy blade changes Tools Bosch Blue Core18 Volt Battery da400lr Call for Pricing 4 Up to 50% Longer Life 4 Bosh BlueCore™ cooling rods absorb the heat inside the batteries 4 Battery cells last longer because they stay cooler 4 For Models: 33618, 32618, 13618, 52318, 53518, 1162K-24, 3453-01, RZ18V RotoZip Premium Cut Off Kit Call for Pricing rz20-2100 Makita Heavy Duty ½" Right Angle Drill Call for Pricing da400lr 4 Includes dry diamond cut off wheel for tile 4 Wrench-less bit change 4 Variable speed 4 LED work light 4 Reversing switch 4 Dust sealed switch 4 Auxiliary handle (side grip) 4 Soft sided carry case 4 Use with or without the angle attachment 4 High and low speed drilling capability 4 Molded carrying case RotoZip Cutting Tool Kit Bosch 3 in 1 Radio, CD, and Battery Charger pb10-cd Includes 3 Zipbits and wrench, and Zipbit case. 4 Remote controlled jobsite radio/CD player with 4-way GFCI Power Outlet 4 CD Player with anti-skip technology and MP3/CD-R/RW compatible Hitachi 7¼" Circular Saw 4 Charges Bosch battery packs c75b 4 Custom Bass and Treble control, four preset EQ settings 4 Advanced digital tuner with 20 FM presets 4 Auxiliary input for MP3 player Power Tools 4 Radio and CD player operates on Bosch battery packs - 12V-24V 4 12 Volt DC power outlet ideal for charging cell phones Call for Pricing 4 Will do 0 to 90 degree cuts 4 Professional commercial grade with extra heavy duty cord 4 Easy alignment for accurate cutting 1 RotoZip Duracut ¼" Bit 4 Built in rule on saw guide rz250 4 Includes a roomy carry case 4 Aluminum roll cage protects unit from a 10 ft. drop For Cement $ 8.70 5 RotoZip Sabrecut 1/8" Bits sc5 4 Large illuminated digital display for easy viewing For Wood and Plastic Siding $ 5.65 10 RotoZip Guidepoints 1/8" Bits 4 Sealed buttons, speakers, battery chamber to protect unit from dust and weather 64 Call for Pricing rz05-1100 Call for Pricing gp10 800 444 7223 | www.paceintl.com For Dry Wall $ 6.75 Tools FLM3818 FLM1254 B.E.S. Masonry Flexible Drill Bits Wood Owl 6" Auger Bit Tri-Cut Design 03703 3 /8" × 6" $ 8.30 FLM31618 3 /16" × 18" $ 13.50 FLM3818 3 /8" × 18" $ 15.00 03705 ½" × 6" $ 8.37 Wood Owl 18" Auger Bit Tri-Cut Design 03707 5 /8" × 6" $ 8.40 03803 3 /8" × 18" $ 18.85 FLM1248 ½" × 48" $ 18.35 03709 ¾" × 6" $ 9.00 03805 ½" × 18" $ 19.45 FLM1254 ½" × 54" $ 18.72 03711 7 /8" × 6" $ 10.25 03807 7 /8" × 18" $ 20.70 FLM1272 ½" × 72" $ 19.29 03713 1" × 6" $ 11.50 03809 ¾" × 18" $ 23.05 03715 11/8" × 6" $ 14.20 03811 7 /8" × 18" $ 25.60 03717 1¼" × 6" $ 15.40 03813 1" × 18" $ 27.30 03718 13/8" × 6" $ 16.95 03815 11/8" × 18" $ 33.25 $ 18.25 03817 1¼" × 18" $ 38.15 03818 13/8" × 18" $ 43.75 03819 1½" × 18" $ 46.00 03719 1½" × 6" 4 For fast cutting clean holes in wood 4 For fast cutting clean holes in wood ¾" × 54" Flexible Auger Mag Bit $ 35.40 48-13-8275 brd1224 B.E.S. Auger Flex Bit with Replaceable Head fib1236 ½" × 36" $ 16.96 fib1248 ½" × 48" $ 16.96 FIB3448 ¾" × 48" $ 22.25 fib1254 ½" × 54" $ 17.57 FIB3454 ¾" × 54" $ 22.05 fib1272 ½" × 72" $ 18.40 FIB5872 5 $ 19.00 /8" × 72" brd3824 FLX1224 brd3848 FIBH34 B.E.S. High Speed Steel Flex Bits FIBH58 BRD1224 ½" × 24" $ 28.60 B.E.S. Auger Flex Bit with Replaceable Head FLX1224 ½" × 24" $ 17.30 brd3824 3 /8" × 24" $ 19.20 fibH12 ½" $ 6.99 FLX3836 3 /8" × 36" $ 13.50 brd3848 3 $ 19.90 fibH34 ¾" $ 8.35 FLX3872 3 $ 17.50 fibH58 5 $ 7.64 /8" × 72" /8" × 48" 800 444 7223 | www.paceintl.com /8" 65 Bits/Blades B.E.S. Tru-Point-Brad Point Flex Bit FLX3872 Tools B.E.S. 72" Flexible Extension $ 17.10 FIBEX72 Irwin Unibit ¼" - ¾" $ 42.25 59003 Forstner Drill Bit Kit $ 50.00 fbs1016 4 Hickory Woodworking™ Irwin Long Bits /8" 16" $ 5.47 ½" × 16" $ 5.75 88706 3 88708 88710 $ 6.10 5 /8" 16" 4 16 piece Forstner bit set. sizes ¼" through 2 1/8" in 1/8" increments Irwin Long Quick Change Bit 90106 6" $ 6.75 90112 12" $ 7.51 4 Industrial quality - tools fully hardened 4 Use in hand tools or drill presses 4 Use to make: flat bottomed holes, counter bored screws, decorative edges, pocket holes, pilot holes. Irwin 8 Piece Spade Bit set 10212 10217 10212 10216 10217 /16" × 4" $ 4.00 ¼" × 4" $ 4.20 ¼" × 6" Bits/Blades 5 /16" × 6" $ 4.80 10255 3 /8" × 6" $ 5.00 10232 ½" × 6" $ 5.20 /8" × 12" Steel Bit SF3812 66 3 Cobalt 21 Piece Drill Bit Set $ 35.00 22-8376 1 4 Set includes: bits ranging from /16" to /8" in increments of 1/64" $ 4.60 10221 3 /8" through 1½" 4 With case 4 Premium Smooth Shank Masonry Drill Bit 3 $ 20.14 341008 10221 3 4 135º drill point 4 Complete with indexed steel case 100 Nail Plates 1 3/8" × 3" FP159-3 $ 15.40 FP159-6 $ 16.25 4 After drilling a hole through a board, strengthen the area with a Simpson nail plate. $ 14.99 800 444 7223 | www.paceintl.com Irwin Auger Bits 47412 ¾" × 17“ $ 19.55 47416 1" × 17" $ 23.32 Tools Wood Owl Self-Feed Wood Bit 48-25-2001 2" $ 40.00 48-25-2561 9 $ 40.00 2 /16" Drill Bit and Anchor Kit $ 2.25 drlbit&anckit 4 Fits ½" Drill Chuck 12 Piece Mainenance Hole Saw Kit $ 115.00 JEKiT 4 Bi-Metal Variable Pitch Hole Saws & Arbors 4 ¾", 7/8", 11/8", 13/8", 1½", 1¾", 2", 2¼", 2½", 1H, 2H, 4H 4 M-3 cutting edge 4 Variable pitch, positive rake 4 1-1/2" cutting depth 4 Cuts nail-embedded wood, machinable metals, and plastic Hole Cutter with Dust Catcher LC-1025 $ 83.00 100 5/16" × 2½" Lag Bolts ch-lags /16" head $ 6.50 ½" head $ 6.50 7 ch-lags-1/2 Clean Installation … Happy Customers! Finally an economically priced hole cutter that not only can cut a hole in dry wall and wood from 1¼" up to 10", but it also collects the dust for a clean installation job. Simply set the tool for the size hole that you need, hook it up to your drill and your ready to go. 50 5/16" × 2" Lag Screw 1122161 Zinc plated hex-head lag screws $ 13.65 Hole Cutter Replacement Blades lc-3 $ 9.75 HILTI Toggler Bolt without Screws ¼" 374496 Call for Pricing 4 Grip range 3/8" to 35/8" (10mm - 92mm) Two 12" Replacement Hacksaw Blades 62826 $ 2.75 100 #8 × 1¼" Phillips Pan Head Self Tapping Screw 1131310 800 444 7223 | www.paceintl.com Bits/Blades 4 Save several hours installing fixtures using these newly designed anchors into concrete block vs. old-fashioned wing toggles $ 2.60 67 Tools 32174 32169 100 Course Thread Dry Wall Screws 100 #8 × ½" Self-Tapping Screw $ 1.50 32123 32169 #6 × 1" $ 1.50 32172 #6 × 1½" $ 1.50 32174 #6 × 2" $ 1.50 100 ¼" Zinc Plated Box Washers $ 1.89 1133004 25 Metal Anchors for Dish Installs 100 #8 × 1" Screw Self Tapping 32125 $ 1.50 Wafer Head 100 ¼" × 2¼" Tapcon Concrete Anchor Screw $ 19.99 51542 30 Spring Toggle Bolts ¼" × 4" 100 Tradewind™ Concrete Anchor Screw 100 8 × 2½" Galvanized Deck Screw Exterior # $ 2.50 32195 $ 22.00 52010 tw-cmtsc-125 ¼" × 1¼" $ 15.75 tw-cmtsc-175 ¼" × 1¾" 16.35 $ 23.00 51671 4 Comes with drill bit for easy use 1131302 100 Plastic Wall Anchors #6-8 × ¾" 1131298 $ 3.05 50976 Screws/Anchors 100 EZ-100 Metal Drywall Anchors 100 Sheet Metal Screws Pan Head $ 22.00 50930 1131302 #8 × 7/8" $ 2.26 1131298 #8 × ¾" $ 2.20 4 Self-drilling one-piece anchor 4 Versatile anchor accepts #6, #7 and #8 sheet metal screws Pack of 100 Drive Rings 30-00805 30-00807 /8" $ 29.00 1¼" $ 45.00 7 4 For use with the Hilti Power Nailer 68 800 444 7223 | www.paceintl.com Tools Hilti Spray Insulation Foam CF12 Call for Pricing Hilti Foam Cleaner Case CC12 Call for Pricing Hilti Masonry Drill Bits Hilti Foam Spray Insulation Kit 338643 Call for Pricing Includes: 4 Foam dispensing gun & carrying case 4 3 cans of spray foam 4 1 can of cleaner Hilti Rotary Hammer Call for Pricing te-2 4 Rated power: 600 W, rated voltage: 120 V 4 Minimum Distance between wall and hole drilled: 1.2" sds3/16 3 /16" × 6" Call for Pricing sds1/4 1/4" × 6" Call for Pricing sds5/16 5 /16" × 6" Call for Pricing /8" × 6" Call for Pricing sds3/8 3 sds3818 3 /8"x18" Call for Pricing sds1218 ½"x18" Call for Pricing sds1412 ¼"x12" Call for Pricing sds5818 5 Call for Pricing /8"x18" 4 Precision hammering action: 0-2400 blows/min 4 Full hammering action: 0-4600 blows/min Carry Case for Hilti Foam Gun 311111 Call for Pricing 4 Includes, case, drill guide, lubricant 4 Protects Hilti 15" foam gun, compressed foam, & cleaner canisters Hilti 42mm Pins $ 12.50 34-355 4 Pack of 100 4 For use with the Hilti Power Nailer Hilti 15" Foam Dispensing Gun 259768 Call for Pricing 4 Performance: Fasteners up to 72mm into concrete and steel Hilti 27" Spray Foam Gun 313187 Call for Pricing 4 Extra long spray foam dispenser for those hard to reach applications 4 Weight: 2.0 Kg 4 Complies with OSHA regulations 4 Will attach a fastener to either concrete or steel 800 444 7223 | www.paceintl.com GBOOST 100 Pack of Cartridges for the DX-72 Power Nailer GBOOST Green (level 3) $ 11.00 YBOOST Yellow (level 4) $ 11.00 69 Insulation/Concrete Hilti Powder Actuated Power Nailer DX-72 Call for Pricing Tools Spackling Paste $ 6.29 18768 4 1 quart - quick-drying vinyl spackling paste 1,000 Staples for the T18 $ 2.50 T18S Small Wire Tacker $ 35.00 T18 4 All steel construction lasts and lasts 4 Patented jam proof mechanism 591189-CL 4 Chrome finish resists wear and tear 4 Grooved guide ensures perfect stapling Tradewind™ 2½" & 4" Dry Wall Knives $ .95 tcpk24 300 Staples for the T59 Stapler 4 These are nice, tough, quality yet economical and disposable putty knives 95150 ¼" (clear) $ 5.29 591189BL 5 /16 (black) $ 5.29 591189CL 5 $ 5.40 /16 (clear) 4 For RG-6 and other wire Insulated Staple Wire Tacker $ 35.95 t59 591188 4 Shoots Insulated staples that will not damage wire 4 Loose Fit 4 Special coating increases holding power over 3 times Brazing Rod .125 95150 $ 42.00 Brazing Rod .062 DIA × 20 × 1# 95164 1,000 staples for the T-25 $ 42.00 4 Size .125" × .050' × 20" × 1#; Silfos 15 lbs.; Flow Pt. Temp. 1300F, Liquidous 1475F t25s Arrow T-25 Staple Gun $ 2.50 $ 47.00 t25 4 Professional Grade stapler that will not damage wire 4 All steel construction lasts and lasts 4 Patented jam proof mechanism Stapling 4 Chrome finish resists wear and tear 4 Grooved guide ensures perfect stapling Tradewind™ Mud Ring Cover TW-MRCVR .062" × 20" FosFlo 95013 Tradewind™ Mud Ring Single Gang $ 10.00 TW-MR1 4 1 lb. tube of .062" × 20" alloy brazing rod 70 $ 1.05 800 444 7223 | www.paceintl.com $ .80 Tools B.E.S. Glow Fish II Kit $ 72.60 glf407 B.E.S. Magnafish with Case 5 4 One /32" × 6' with Bullnose/Female tip $ 89.95 4 Four 5/32" × 4' with Male/Female tips magnafish 4 Comes with case seen above Quick and simple wire pulling through existing walls using a magnetic paddle on the outside and a magnetic leader in the inside. B.E.S. Installation Kit bbCon 300 Kit 4 Carry Case 4 3' Bullnose Rod 4 Fish Chain and Retriever 4 Attachment kit 4 Wisp head 4 Glowfish set 4 Repair Kit $ 454.32 B.E.S. 24' Fiber Fish Kit $ 82.31 fib107 B.E.S. 10' Fish Chain with Magnetic Retriever fib223 4 Non-conductive fiberglass rod sections ¼" thick $ 16.10 4 Rods can be screwed together to make longer lengths for fishing wire in existing walls and attics or across drop ceilings 4 With a variety of attachments available that make wire fishing easy! 4 15' Telescoping pole with z-tip 4 36" wire bits B.E.S Flex Bit Steering Guide Tool 4 3/8" × 36" high speed steel flex bit 4 3/8" × 72" high speed steel flex bit 4 ½" × 24" high speed steel flex bit 4 1/16" × 72" extension fibgud B.E.S. 6' - 15' Telescoping Pole $ 83.80 tpf615 4 Flex Bit Steering Guide 4 Telescopes to full length in seconds 4 Zircon Wall Scanner 4 Easy to handle in tight spots $ 16.00 The Flex Bit Steering Guide is used to guide flexible bits inside a finished wall. This is a must have tool if you are using flexible drill bits. Wire Fishing 4 Push or pull wires over long spans, suspended ceilings, crawl spaces & attics 4 Made of non-conductive fiberglass for safety 4 Innovative lever lock system locks sections at any length 4 Sturdy, durable, and lightweight at 5 lbs. B.E.S. 12" Ball Chain With Insert For Fish Rods fib519 800 444 7223 | www.paceintl.com $ 8.08 71 Tools B.E.S. Wisp Head B.E.S. 25 Foot Carpet Fish Tape $ 45.00 uc25 $ 11.10 fib522 4 For pulling wire across suspended ceilings Greenlee Steel Fish Tape with Case 438-5 /8 × 50' 1 $ 30.12 4 Heavy duty fish tape for running under carpets 4 Thin, smooth design makes it a breeze to use 1/4" Fish Rod Attachment Kit B.E.S. 15' Fiberglass Fish Tape $ 37.00 fibt15 The flexibility of fiberglass is excellent for pulling wire through tight spaces and around corners. $ 29.99 fib120 Greenlee Nylon Fish Tape with Case 436-5 /16" × 50' 3 $ 62.00 4 Includes: Directional Tool, Fish Hook, Tips, Pull Ring, Magnet Head, Ball Chain 100 Universal Stud Insulators 22288 pack of 100 $ 20.00 4 Fits all hole configurations 4 Quick, snap-in design B.E.S. Glow Fish II Repair Kit for /32" Rods 5 glf402 $ 4.50 4 Prevents wire damage Universal Attachment Kit $ 28.50 fib520 4 Use for all 3/16" and 5/32" Rods Wire Fishing 4 Includes: Directional Tool, Fish Hook, Tips, Pull Ring, Magnet Head, Ball Chain Wire Lube 1 Quart B.E.S. Screw Tip for Glow Rods fib512 22290 $ 7.95 $ 15.00 4 Pull wire easily and safely through all types of conduit 4 Greaseless, non-toxic 4 Suitable for optic wire 72 800 444 7223 | www.paceintl.com Tools 5.3 oz. Tube of 825 Silicone Sealant $8.00 CHEMPLEX825-5.3 Specially formulated grease like product containing selected silicone oils and inert silica fillers. This stiff, tacky compound has excellent dielectric properties, oxidation resistance and water repellency. It is essentially non-toxic and non-melting and retains its pliability even after extended service. Chemplex 825 is resistant to a variety of chemicals and is compatible with most plastics and rubbers. Chemplex 825 has broad temperature range of -40 to 400°F (-40 to 204°C) 5.3 oz. Tube of 825 Silicone Compound $6.00 TW-Silicone Riser Rated Conduit Roll $ 96.00 DF4X1C 1" × 100' DH4X1C 1½" × 150' $ 165.00 DJ4X1C 2" × 100' $ 160.00 FireStop Spray Foam 24 fl. oz. $ 43.00 fsic24f 4 The “first” expanding firestop foam Tube of Silicone 2.8 oz. 1213214 Clear $4.75 1213222 White $4.75 3013760 4 Tested to ASTM E-814 (UL 1479) 4 White, orange, red, green and blue 4 Cost effective and simple to use 4 Classified for 1 & 2 hour rated assemblies 4 Architectural grade 4 Conforms to all building codes 4 Interior/exterior FireStop Silicone 10.5 fl. oz. 4 Non-paintable FSS-10 $ 10.50 4 Mildew resistant 9 Volt Alkaline Battery 32116 4 Won't crack, shrink or peel $ 3.45 Small Silver Sharpie 1/2" × 10' Coax Seal Tape TW-sealtape $ 7.08 4 5 rolls 4 Expands to fill and seal openings 4 100% silicone sealer Assorted Color Electrical Tape $5.95 san-39100 Newborn Brand EZ-Thrust Caulking Gun $ 1.35 $ 7.25 0111 Sealants 4 Ideal for latex, silicone, adhesive, rubber compound and polyurethanes 4 EZ-Thrust mechanism 4 Spout cutter 3 ¾" × 10' Bishop Tape TW-BISHOP $15.99 4 Seal puncture tool Large Black Sharpie 4 Thumb release stops caulk flow n2ptlg11-black 800 444 7223 | www.paceintl.com $ 1.20 73 Tools TW-3LED Heavy Duty Outdoor Extension Cord Tradewind™ In-Wall Flashlight Tradewind™ 3-in-1 LED Head Light $ 15.99 $ 29.00 CHWI 4 Perfect for wire fishing jobs 4 High intensity LED CEP-1202 25' $ 21.00 CEP-1205 50' $ 35.00 4 Power Flex Outdoor Extension Cord 4 Long lifetime of LED (100,000 hrs.) 4 Moisture resistant molded connectors 4 Adjustable head strap 4 Molded 3-Wire Male Plug 4 Adjustable inclination 4 Meets OSHA requirements 4 Uses 3 AAA batteries 4 UL/CUL Listed 4 Designed for rugged outdoor use 4 Heavy duty 12/3 wire Fluorescent Work Light $ 25.00 LIGHT 4 6' three prong cord maglite1 905-100 4 12 amp grounded outlet Large Maglite Flashlight $ 18.55 4 Large machined aluminum Maglite A/C 2-Prong Ground Adaptor $.50 4 50 watt light output 4 End spotlight 4 Bulb lasts up to 7 years or 10,000 hours 4 2-Cell D batteries BernzOmatic® Self-Igniting, Adjustable Torch Kit 23656 Maglite Clip Magclip $ 34.50 The Propane Torch Kit is ideal for soldering Copper Pipes up to ¾" thick, thawing frozen pipes & locks and loosening rusted bolts. 4 Includes self igniting adjustable torch head $ 4.50 4 14 oz propane tank 500 Watt Halogen Work Light Lights 4 Spare bulb included $ 12.77 4 16.4 oz/465 g (1.02 lbs.) 4 Convenient propane cylinder 4 Made in the U.S.A. 4 Includes 2 AA Batteries & Holster 74 80120 4 Recommended for all Coleman propane appliances Small Maglite Flashlight with Case maglite2 Replacement Propane Tank $ 12.40 PQs45 800 444 7223 | www.paceintl.com $ 4.50 Tools Shoe Covers Cold Heat Solder Tool $ 25.00 csbscwpdb 300 Pairs $ 157.90 The Cold Heat tool’s patented technology creates the heat you need to solder within seconds, and its cordless design lets you operate it anywhere for light-duty soldering projects. When the tip’s two electrodes make simultaneous contact with an electrically conductive material such as the work piece (wire lead, terminal, solder, PCB pad, or other material) this circuit is completed and the high resistance electrodes generate instantaneous heat at the tip. CSRSCWPDB One Pair $ 25.00 chsg 4 One size fits all Shop Vac 4.5hp Wet Dry Vac $ 90.00 952-02-62 4 Includes: extra long 18' lock-on hose system, 2 extension wands, crevice tool, gulper nozzle, round brush, 12" deluxe nozzle, 12" squeegee insert, 12" brush insert, cartridge filter, tool holder, wall mounting bracket Furniture Pad/All Weather Utility Pad $ 11.50 401-4852 Work boots were made to be scuffed, not your customers floors. A furniture pad makes a great surface for your tool box and other tools when working in a clients home. Measures a generous 6 ft. by 8 ft. Shop Vac 4.5hp Wet Dry Vac dc500 $ 115.00 4 Runs off of DeWalt battery packs (12V-18V) or 120V AC 4 High efficiency, washable filter traps 99.7% of dust as small as 0.3 microns 4 Heavy duty rubber hose Large Utility Broom Tradewind™ Dust Pan and Brush $ 10.70 TCDP 4 Large shop dust pan with nylon brush 10523 $ 19.00 4 Constructed with highest quality 4 100% Natural broom corn 4 For quick & easy clean up 4 Handcrafted for durability 4 2 gallon (7.5 liters) tank 4 5 sews for light to heavy debris 4 Drain port Cleaning Tools 4 Blower 4 On board storage for hose, cord, crevice tool and wide nozzle Tradewind™ Nylon Brush TCBRUSH Perfect for quick & easy clean ups 800 444 7223 | www.paceintl.com $ 3.50 75 Tools 25dB Ear Muffs EMUFFS $ 11.75 4 25 dB Ear Muffs OSHA Approved Safety Vest Maintenance-Free Dual Cartridge Respirator 4 Adjustable 3 position head band $ 20.00 4MH61 4 Ultra soft ear cushions for added comfort 4 Protecting your hearing today means fewer medical bills in the future! 4 Applications: paint spraying, priming, rust proofing, undercoating, pesticides, etc. 23300 $ 11.00 OSHA approved bright orange safety vest. Keep your team safe and visible to traffic. Safety Glasses SGLASS $ 5.15 You only have one set of eyes, so protect them with these good looking safety glasses. rcan12 respret 10 Filters for Respirator rcan12 Form Fitted Padded Work Gloves 10 pack $ 18.00 114 $ 33.00 These form fitted work gloves have excellent grip and dexterity for picking up small items. Save your skin and carry a pair of these gloves in every tool box. 20 Retainers for Respirator respret 20 pack $ 12.95 White Hard Hat 91295 $11.65 4 Protect your noggin with this OSHA approved hard hat First Aid Kit - 73 Piece $ 15.95 9038308 Safety Tradewind™ 5 pack of Dust Masks TCMASK5 4 5 pack of paper dust masks with elastic head band 76 $ 2.79 4 Includes critical supplies not found in other kits: trauma pad, exam gloves, conforming gauze roll bandage, and more 3 Gallon Cooler with Spout 1683-01-11 4 Drip-resistant spigot & screw-on lid 4 Unique compartmental organizers 4 Durable construction 4 Reviewed and approved by a Medical Advisory Board exclusively for First Aid only 4 Osha Approved 800 444 7223 | www.paceintl.com $26.88 Tools Triplett Pocket-sized Digital Multi-Meter $ 19.95 2030-C Triplett Compact Digital Multimeter 1101-A $ 34.95 4 Compact DMM with backlit display & temperature test (probe included) 4 3½" high display digits, with 1999 max. reading 3240 4 Auto/manual ranging $ 169.99 The PairMaster will check point to point wiring, commonly referred to as wire-mapping. This tells the user whether or not the cable pairs, 1/2, 3/6, 4/5, 7/8, are wired correctly at both ends. Green LEDs indicate pass, Red LEDs indicate fail. If a fault is detected, the corresponding fault code is displayed on the large, two digit, seven segment LEDs. 4 The Near End Crosstalk feature checks for excessive A.C. coupling between each pair in a cable 4 AC/DC volts to 600V 4 AC/DC current to 400mA 4 3½" high display digits, with 1999 max. reading 4 AC/DC voltage to 500V 4 AC/DC current to 10A 4 Overload protection with double insulated case 4 Safety test leads with screw-on alligator clips Triplett PairMaster LAN Cable Test Set SNIFF-IT2, AC Voltage Detector $ 14.40 9601-sniff-it 4 Safe, non-contact Voltage probe 4 Convenient pocket-size 4 Checks 600-800 Volts AC 4 Audible alerts when AC voltage is present Digital Circuit Breaker Locator 9650 Triplett PairMaster LAN Cable Test Kit $ 48.00 $ 245.00 4 Triplett breaker Sniff-It 3241 kit 4 Simply plug the transponder into an outlet, run the receiver over the circuit breaker panel and it will identity the breaker for that outlet! LAN Cable Test Set with 16 remote identifiers and carrying case Complete LAN Cable Testing Kit includes: 4 1 - PairMaster LAN Cable Test Set 4 Audible and visual indication 4 UL listed 4 Lifetime warranty 4 16 - Remote identifiers 4 2 - RJ-45 in-line couplers Plug Bug - GFCI Receptacle Tester 9610-PLUG-BUG $ 6.25 4 Detects common wiring problems in standard and GFCI outlets 4 For use on 110~125 VAC receptacles 800 444 7223 | www.paceintl.com Test Equipment 4 120/220 VAC transmitter (250 VAC Max) 4 1 - RJ-45 patch cable (category 5) 4 1 - 9 volt battery 4 1 - Soft-sided carrying case with strap 4 1 - Instruction manual 77 Tools Triplett TDR Cable Fault Finder Triplett TDR LAN Cable Fault Finder 3273-LAN TDR $ 180.00 $ 180.00 3271-TDR 4 LAN cable test set with cable length meter 4 Built-in tone generator for cable tracing 4 Find cable length or distance to fault from one end! Triplett Fox 2 & Hound 2 Wire and Cable Tracing Kit 4 Low cost digital cable length meter/TDR 3395-k 4 Built-in tone generator for cable tracing and identification 4 Low cost and simple to use 4 Suitable for testing all types of communication cables 4 Trace wires and cables of all kinds including: electrical wire, twisted pair, LAN cable, coax cable, multi-conductor cable, telephone cable, speaker wire, alarm wire and more 4 Compact, ergonomic design, weighs less than 8 oz. 4 The Fox 2: deluxe tone generator with “TrueTrace” 4 Padded cordura holster included 4 The Hound 2 probe: inductive tracer. Streamlined design allows for better access in those hard-to-reach areas 4 Internal library of 39 standard cable types 4 Digital display shows 7 common wiring faults: shorted pair, open pair, crossed pair, reversed pair, shield continuity and split pair 4 Includes 2 remotes for wire mapping 4 Approximate range 4" RJ-45 to RJ-45 Test Lead 79-790 $ 95.40 4 LED intensifies as the tone signal gets stronger Coax: 6400 ft Structured wiring: 2500 ft Telephone cable: 2500 ft 4 Includes cordura carrying case $ 18.00 4 For use with the Triplett 3273 LAN TDR Cable Fault Finder 6” BNC to BNC Test Lead 79-791 $ 18.00 For use with the Triplett 3271 TDR Cable Fault Finder. WireMaster XR-5 Cable Tester $ 107.10 3260-XR-5 4 Tests 5 types of cables; RJ-45, RJ-11, BNC, 1394 and USB WireMaster 8-Way Coax Cable Mapper 3274 $ 35.99 6" BNC to Alligator Clip 4 The XR-5 Checks for continuity, shorts, miswiring, crossover, 79-792 opens, and grounding Test Equipment 4 8 remotes with BNC connectors included 4 Tests installed wiring or patch cables 4 Tests for opens and shorts 4 600 ft test distance 4 120VAC line cross protection 4 Remote attaches to main unit 4 Real-time test helps identify intermittents 4 LED’s indicate connections and faults 4 Use to identify coaxial cables in CCTV security and surveillance systems, broadcast TV, residential video systems and cable TV (with F adapters) 4 Beeper provides audible annunciation of test results 4 Identify any pair of wires such as audio, video, phone lines, etc using appropriate adapters 78 4 Simple one button test 4 Kit includes: BNC terminator, BNC, RJ-11, & RJ-45 jumper cables, padded cordura carrying case, 9V battery, instruction manual For use with the Triplett 3271 TDR Cable Fault Finder. 18" BNC to Spike & Pin Clip 79-793 For use with the Triplett 3271 TDR Cable Fault Finder. 800 444 7223 | www.paceintl.com $ 18.00 $ 32.40 Tools Telephone Test Set With Headset Test-Um Resi-Talker Test Set kp312 $ 112.30 lb110 $ 450.15 The Resi-Talker is a self-contained self-powered, portable telephone test set for use by installers, repair technicians and other authorized personnel for temporary communications and the operational service and installation of telephone/data lines. Features: 4 Tone and pulse dialing 4 Microphone mute 4 Continuous line polarity indication (talk or monitor) 4 Electronic ringer 4 Amplified line monitor for volume levels comparable to “off hook” operation 4 Tone and pulse dialing 4 Modular cord set attachment 4 Microphone mute feature 4 Low battery indicator 4 Last number redial - 32 digits 4 Headset jack 4 Continuous line polarity indication (talk or monitor) 4 Battery-powered monitor mode with auto power-off on dead lines or when disconnected 4 Electronic ringer 4 Amplified line monitor for volume levels comparable to “off hook” operation 4 Modular cord set attachment 4 Low battery indicator 4 Headset jack for hands-free conversation 4 Battery-powered monitor mode with auto power off on dead lines or when disconnected 4 Includes a Home Cabling Toner and Home Cabling Tester Test Equipment 800 444 7223 | www.paceintl.com 79 Online Shopping: Simple and Secure Pace is dedicated to seeing that your orders are placed promptly. In fact, most orders received before 2:00 p.m. CST will ship the same day. Sign-in or Register products include spec sheets and sales tips for the product. You can also add them to your cart inside the detailed view. If you already have a user account in our online store you can simply sign in by filling in your username and password. If you have forgotten your password, click on the link below the sign in form to retrieve it by email. Previewing Shopping Cart: To preview a detailed list of what is in your shopping cart, click on the “View Cart” button at the top of the screen. A detailed list with quantities, pricing, and totals can be seen. You can also update or change any quantities in your order. To Register: Click on the link to register for instant access, or fill out the credit application, (pdf) if you would like terms and conditions to your account. Once registered, you will receive a confirmation e-mail with a User ID issued to you. You can also set up a tax exempt status by faxing/mailing a copy of it to the address/fax number provided in the e-mail. Shopping cart content Checkout To checkout, hit the “Checkout button” on the top navigation bar. There you will see your quantities and total bill. total shipping &tax search Browsing & Searching: Once inside the eDistribution page, you can simply browse the categories to the left, or use the search-field to search by keyword or part number. Make Adjustments to Quantities: You can still make adjustments here to the quantity of items. To see the changes click the update cart button next to the quantity you’ve just changed. Adding Items to the Cart: Next to every item is a box with the quantity set to “0” To add one or more of that item, simply type the number you want to order then click the “add to cart” button or press return. If you want to delete items from your shopping cart, click the trash button . Quick Clicks allows you to conveniently store frequently purchased parts you so can easily access them in the future. To add parts to your Quick Clicks, click the icon when browsing through the parts list. Change Shipping Info: If the shipping information differs from what is displayed in the Shipping info section, just click the button to add/edit/delete shipping information. Your shipping & handling costs will change automatically based on location. Product categories shopping Cart quick view shipping info payment info Finalizing checkout: Once the payment Information is filled out and submitted, you will be re-directed to a Confirmation page. You should print this as a receipt for your records. To view more details on a particular product, click on the product number or the picture adjacent to it. Many www.paceintl.com Terms and Conditions Same Day Shipping Business Hours Orders received before 2:00 PM CST time will be shipped same day depending upon availability. Monday through Friday 8:00 AM to 5:00 PM Central Standard Time. Terms Cash, MasterCard, Visa, Discover, American Express, Bank Wire, Company Check upon approval and Net 30 days for qualified buyers. Prices do not include freight charges or insurance. Catalog and Price List Errors The accuracy of the catalog and prices listed have been carefully checked before printing and we believe them to be reliable. However, Pace assumes no responsibility for any inaccuracies or typographical errors that may exist. All information in this catalog is subject to change without notice. Pace is not responsible for manufacturer’s changes in specifications or pricing. DOA Policy Pace stands behind everything we sell. For 30 days from the date purchased from Pace, we will replace the product (see Return Policy). After 30 days Pace will instruct you how to get your product replaced or repaired under warranty from the manufacturer. Damaged Merchandise Please inspect your shipment for shortages and any damage. By signing for the shipment you are accepting the responsibility for the damaged goods and no freight claim can be collected. If anything on the shipment appears damaged and you choose to receive the order, put notes on the Bill of Lading. Pace’s obligation ends when the freight carrier picks up the shipment. Return Policy Pace will accept product returns if: 4 the item was not a special order 4 the item is returned in like new condition with all accessories in original box within 30 days of purchase. 4 proper RA procedures are followed. For an RA number, contact the RA department at 1-800-246-9620 for a Return Authorization number or, go to www.paceintl.com for our RA Return Form and process. No returns will be accepted without return authorization. A 20% restocking fee may be assessed. Prices and availability are subject to change without notice. The color carrier is generated by the composite video signal. It is located approximately 3.58 MHz above the video carrier, for channel 2 this would be located at 58.83 MHz. Standard CATV frequency matches IRC except for the A-x channels 95-99. IRC stands for Incrementally Related Carrier and means that the lower edge of the channel space is numbered such as 54 MHz, 60 MHz, 66 MHz etc. HRC stands for Harmonically Related Carrier, and means that the video carrier is assigned to the lower edge. Some cable systems use STD cable, IRC, and some use HRC. VHF IF Low-Band A channel frequency may be referred by the lower edge (in example 54 MHz), as a range of lower edge to upper edge (54-60 MHz), or by the video carrier (55.25 MHz). The video carrier is the most commonly used reference used in tables to match a channel with it's frequency as it is the frequency measured with RF meters. T-7 - 7.0000 T-8 - 13.0000 T-9 - 19.0000 T-10 - T-11 - T-12 - T-13 FM-Band The audio carrier is located 4.5 MHz above the video carrier, for channel 2 it is 59.75 MHz. CATV accommodates more channels and at lower frequencies than OverThe-Air broadcast TV as it allocates channels every 6 MHz without leaving frequency gaps that are used for short range radios, and other communication systems. Over-The-Air broadcast TV has gaps before channel 2 (54-60 MHz) between channel 6 (82-88 MHz) and channel 7 (174-180 MHz), and also between channel 13 (210-216 MHz) and channel 14 (470-476 MHz). Carrier Frequencies (MHz) TV - Visual Visual 11.5000 J 23 217.2500 221.7500 17.5000 K 24 223.2500 227.7500 23.5000 L 25 229.2500 233.7500 25.0000 29.5000 M 26 235.2500 239.7500 31.0000 35.5000 N 27 241.2500 245.7500 37.0000 41.5000 O 28 247.2500 251.7500 P 29 253.2625 257.7625 Q 30 259.2625 263.7625 43.0000 47.5000 45.7500 41.2500 R 31 265.2625 269.7625 2 2 55.2500 59.7500 S 32 271.2625 275.7625 3 3 61.2500 65.7500 T 33 277.2625 281.7625 71.7500 U 34 283.2625 287.7625 81.7500 V 35 289.2625 293.7625 87.7500 W 36 295.2625 299.7625 4 5 4 5 67.2500 77.2500 6 6 83.2500 A-5 95 91.2500 95.7500 AA 37 301.2625 305.7625 A-4 96 97.2500 101.7500 BB 38 307.2625 311.7625 A-3 97 103.2500 107.7500 CC 39 313.2625 317.7625 113.7750 DD 40 319.2625 323.7625 119.7750 EE 41 325.2625 329.7625 FF 42 331.2750 335.7750 GG 43 337.2625 341.7625 HH 44 343.2625 347.7625 A-2 98 99 109.2750 115.2750 121.2625 125.7625 B 15 127.2626 131.7625 C 16 133.2625 137.7625 D 17 139.2500 143.7500 E 18 145.2500 149.7500 F 19 151.2500 155.7500 G 20 157.2500 161.7500 Channels with the designation A-1 through A-8 are designated because their frequencies immediately precede that of the CATV channel 14 known as A. Some of these are used for CATV channels 95-99. H 21 163.2500 167.7500 I 22 169.2500 173.7500 At PACE we have the expertise to help you design a full headend solution that suits your needs. Call PACE and let us provide you with the tools you need to start or expand your commercial broadcasting business. 7 7 175.2500 8 8 181.2500 9 9 187.2500 10 10 11 High-Band VHF Aural - 14 Mid-Band Carrier Frequencies (MHz) - A-1 VHF Channel TV A CATV has channels with frequencies below channel 2. They are designated T-7 through T-14 and are usually used for transmission in the reverse direction . These are also known as the Return Path Channels. Broadband internet access, security cameras, and live broadcast feeds use the T channels or Return Path Channels to reach the headend. Band CATV Aural Super-Band The video carrier frequency is 1.25 MHz above the lower edge, for channel 2 the video is at 55.25 MHz. Channel CATV II 45 349.2625 353.7625 JJ 46 355.2625 359.7625 KK 47 361.2625 365.7625 LL 48 367.2625 371.7625 MM 49 373.2625 377.7625 NN 50 379.2625 383.7625 OO 51 385.2625 389.7625 179.7500 PP 52 391.2625 395.7625 185.7500 QQ 53 397.2625 401.7625 191.7500 RR 54 403.2500 407.7500 193.2500 197.7500 SS 55 409.2500 413.7500 11 199.2500 203.7500 TT 56 415.2500 419.7500 12 12 205.2500 209.7500 UU 57 421.2500 425.7500 13 13 211.2500 215.7500 VV 58 427.2500 431.7500 WW 59 433.2500 437.7500 XX 60 439.2500 443.7500 YY 61 445.2500 449.7500 ZZ 62 451.2500 455.7500 Hyper-Band Standard TV channels are 6 MHz wide starting from the lower edge of channel 2 at 54 MHz. Within the 6 MHz space is the video carrier, the color carrier, and the audio carrier for the channel. Band Sub-Band Wavelength Versus Frequency Chart Channel TV Visual AAA 63 457.2500 Aural Band Channel Carrier Frequencies (MHz) CATV TV Visual Aural 461.7500 – 106 685.2500 689.7500 BBB 64 463.2500 467.7500 – 107 691.2500 695.7500 CCC 65 469.2500 473.7500 – 108 697.2500 701.7500 DDD 66 475.2500 479.7500 – 109 703.2500 707.7500 EEE 67 481.2500 485.7500 – 110 709.2500 713.7500 FFF 68 487.2500 GGG 69 493.2500 HHH 70 III JJJ KKK Ultra-Band Carrier Frequencies (MHz) CATV 491.7500 – 111 715.2500 719.7500 497.7500 – 112 721.2500 725.7500 499.2500 503.7500 – 113 727.2500 731.7500 71 505.2500 509.7500 – 114 733.2500 737.7500 72 511.2500 515.7500 – 115 739.2500 743.7500 73 517.2500 521.7500 – 116 745.2500 749.7500 Insertion Loss Tables RG6 COPPER COVERED STEEL RG6 SOLID COPPER Frequency (MHz) dB/ft Frequency (MHz) dB/ft 4 0.013 0.3 0.004 450 0.045 450 0.045 860 0.063 860 0.063 950 0.064 950 0.066 1450 0.083 1450 0.081 2150 0.102 2150 0.100 0.111 2500 0.110 0.123 3000 0.121 LLL 74 523.2500 527.7500 – 117 751.2500 755.7500 2500 MMM 75 529.2500 533.7500 – 118 757.2500 761.7500 3000 NNN 76 535.2500 539.7500 – 119 763.2500 767.7500 OOO 77 541.2500 545.7500 – 120 769.2500 773.7500 PPP 78 547.2500 551.7500 – 121 775.2500 779.7500 – 79 553.2500 557.7500 – 122 781.2500 785.7500 – 80 559.2500 563.7500 – 123 787.2500 791.7500 – 81 565.2500 569.7500 – 124 793.2500 – 82 571.2500 575.7500 – 125 – 83 577.2500 581.7500 – – 84 583.2500 587.7500 – 85 589.2500 593.7500 – 86 595.2500 – 87 – Ultra-Band Band RG6 QUAD SOLID COPPER RG11 COPPER COVERED STEEL Frequency (MHz) dB/ft Frequency (MHz) dB/ft 0 0.003 5 0.024 797.7500 450 0.048 450 0.045 799.2500 803.7500 860 0.061 860 0.055 126 805.2500 809.7500 950 0.065 950 0.058 – 127 811.2500 815.7500 1450 0.080 1450 0.059 – 128 817.2500 821.7500 2150 0.010 2150 0.080 599.7500 – 129 823.2500 827.7500 2500 0.107 2500 0.084 601.2500 605.7500 – 130 829.2500 833.7500 3000 0.120 3000 0.089 88 607.2500 611.7500 – 131 835.2500 839.7500 – 89 613.2500 617.7500 – 132 841.2500 845.7500 – 90 619.2500 623.7500 – 133 847.2500 851.7500 – 91 625.2500 629.7500 – 134 853.2500 857.7500 – 92 631.2500 635.7500 – 135 859.2500 863.7500 – 93 637.2500 641.7500 – 136 865.2500 869.7500 – 94 643.2500 647.7500 – 137 871.2500 875.7500 – 100 649.2500 653.7500 – 138 877.2500 881.7500 – 101 655.2500 659.7500 – 102 661.2500 665.7500 – 103 667.2500 671.7500 – 104 673.2500 677.7500 – 105 679.2500 683.7500 ROCHESTER, MN MINNEAPOLIS, MN PENSACOLA, FL tel 507 288 1853 fax 507 288 1853 tel 763 246 9620 fax 763 542 9665 tel 850 474 3900 fax 850 474 3964 3582 Technology Dr NW Rochester, MN 55901 2454 Louisiana Ave N Minneapolis, MN 55427 9900-F Palafox Street Pensacola, FL 32534 1 888 444 7223 | WWW.PACEINTL.COM