KrAZ-255B 1/35 - Scalemates, scale modeling database

Transcription

KrAZ-255B 1/35 - Scalemates, scale modeling database
WE ARE ALWAYS UNDER CONSTRUCTION !
WWW.MINIMANFACTORY.COM
KrAZ-255B
1/35
Development:
The KrAZ-255B (6 × 6) 7,500 kg truck entered in production in 1965, with full series production commencing in 1967. The KrAZ-255B
was the direct replacement of the earlier serially produced KrAZ-214 7,000 kg (6 × 6) truck. The KrAZ-255B (B1) was a later model that
featured a revised braking system.The KrAZ-255B had some visual similarities with the earlier KrAZ-214 but had a more powerful
engine, a V-8 four-stroke diesel developing 240 hp to replace the six-cylinder two-stroke 205 hp unit of the KrAZ-214. Other design
improvements included a hydraulic steering booster replacing the pneumatic booster of the KrAZ-214, and the standard 1400 × 20 tyres
of the KrAZ-214 were replaced by new wide section pressure adjustable tires with a centralised tire inflation system controlled by the
driver directly from cab. In 1976 the KrAZ-255B was equipped with a new dual-circuit braking system that replaced an earlier single
circuit system, and such vehicles were given the revised KrAZ-255B (B1) model designation.Many of the roles previously undertaken by
the KrAZ-214 were transferred to the KrAZ-255B when it entered series production, these including carrying and laying the TMM
treadway bridge; carrying and launching the PMP heavy floating pontoon bridge; carrying and launching the BMK-T bridging boat;
mounting of assorted engineer/construction equipment and cranes including the USM pile driving set, the E-305 BV crane shovel, and
the EDV-4421 excavator; assorted tankers including the ATsM 7-255B 7,000 litre fuel tanker towing the PTsM 8925 5,800 litre trailer.
Description :
Layout of the KrAZ-255B (6 × 6) 7,500 kg truck is entirely conventional. Of bonneted design, the three-seat cabin is wood framed and
covered with sheet steel. The split front (two piece) flat windscreen opens outwards for increased ventilation.The C-section chassis
frame consists of side-members made from hot-rolled steel. The standard rear body is of the troop carrying/cargo type with dropsides
and tailgate and is normally fitted with wooden bench-type seats and a tarpaulin cover.Motive power is provided by a naturally aspirated
diesel engine fitted as standard with an engine start pre-heater for use in temperatures below -20°S. The KrAZ-255B (and (B1)) and
KrAZ-255V (and V1)) are intended for operation at temperatures ranging from +45°S to -45°S in temperate climate conditions. From
1972 production of versions for tropical (T) climates and temperatures up to +50°S were introduced, such models having a revised
KrAZ-255BT or VT (T - Tropical) designation. On all models all three axles are leaf sprung and are driven, with front axle engagement
being mechanical and controlled from the cab. A five-speed manual gearbox and two-speed transfer box are fitted. The transfer box
consists of two units joined together, the main unit housing the double-reduction gear with gear ratios of 1.23 and 2.28. The additional
unit features two output shafts for rear axle drive and the inter-axle locking differential. An air operated braking system is fitted, with
drums on all axles. The parking brake is of the transmission drum type.
If You have any question or need reference for building please visit our web-site or contact us by e-mail: info@minimanfactory.com
1
11
PE6
77
78
41
PE50
PE34
96
95
rod 1mm