Insufoam Buildings ing

Insufoam
Extruded Polystyrene Thermal Insulation for Metallic Buildings
2500
¡Your thermal ally!
®
THE REAL SOLUTION FOR THERMAL INSULATION
Insufoam 2500 is the perfect solution to thermally insulate ceilings, walls and metal buildings in simple or
compound structures that fit most roofing systems.
BENEFITS
APPLICATIONS
• Available in different thicknesses and lengths
• Provides insulation in simple or composite deck ceilings
• Does not absorb water
• Provides insulation for walls
• High Thermal Resistance Value
• Provides insulation for interior plafonds
• Immediate availability on standard measurements
• No maintenance needed
Lambda Value (w/
mK) AGED
Lambda Value (w/
mK) FRESH
• Estabilidad Térmica a largo plazo
• Certified with 0 (zero) flame spread
• Excellent resistance to compression
• Available in special lengths upon request
• Saves energy to cool building interior
• It has and excellent adhesion with vinyl paints
• It has a thermal uniformity
• Helps to control the transfer of heat by conduction,
Expanded
Polyurethane
convection and radiation
www.insufoam.com.mx
POLYGLOBAL
Carretera México Toluca # 5324, Col. El Yaqui
Delegación Cuajimalpa , México D.F. 05320
US Phone: (281) 576 1611
info@polyglobal.com.mx
Mex Tel: 52 (55) 5255 6000 Mex Fax: 52 (55) 5250 8527
www.polyglobal.com.mx
What is
Insufoam 2500 ?
®
It is a rigid polystyrene extruded panel that doesn’t need tarmac cardboard or
aluminum foil to protect it from moisture. It is lightweight, durable, with
excellent dimensional stability and an excellent resistance to compression
that allows transit on deck without affecting its qualities.
Efective Insulation!
Insufoam is an insulator that provides a real long-term solution by reducing
energy consumption and these savings are guaranteed by the FIDE stamp of
compliance.
Regulated Insulation!
Insufoam meets the Official Mexican Norm NOM-018-ENER-1997
corresponding to Thermal Insulation for buildings. It meets:
NMX-C125, NMX-C126, NMX-C213, NMX-C258,
NMX-C181, NMX-C189, NMX-C210, NMX-C228
ONNCCE is a civil society recognized internationally , which aims to
contribute to improving the quality and competitiveness of products,
processes, services and systems, particularly through standardization
and certification.
Thickness
R
7.5
2.5
Width & Length
Finish
4ft x 8ft
4ft x 8ft
4ft x 8ft
2ft x 8ft
2ft x 8ft
Straight
Cornice cut
Note: Special lengths can be fabricated upon request to minimize
waste material. Speak to one of our sales representative.
Safe Insulation
Insufoam this certified by UL (Underwriters Laboraories Inc.), an independent,
non-profit organization, responsible for testing and certifying the safety of
products emerging in the market. This institution was founded in 1894 and it
is one of the most respectable and recognized throughout the world. UL
certified that Insufoam complies with 0 (zero) flame spread.
Eco Friendly Insulation
The PROFEPA distinguishes with a certificate of clean industry, companies that
voluntarily participate in the program and comply with the standards derived
from an environmental audit. It authorizes companies to use the logo in
marketing programs to promote in consumers the habit of purchasing products
manufactured by companies who encourage environmental care.
Distributed by:
Distribution and Technical Information:
Carretera México Toluca # 5324, Col. El Yaqui
Delegación Cuajimalpa, México D.F. 05320
Tel: 52 (55) 5255 6000 ext. 405 al 407
Fax: (55) 5250 8527,
USA: (281) 576 1611
Contact: info@polyglobal.com.mx
www.polyglobal.com.mx
Insufoam
E x t r u d e d Po l y s t y r e n e T h e r m a l I n s u l a t i o n f o r H o m e s
¡Your thermal ally!
2500
®
The most convenient and simple option in thermal insulation for ecological homes
Manufactured to the highest standards for optimal performance in the home construction
industry offering an excellent solution to thermal insulation in walls, roofs, plafond and
ceilings. An ideal solution for new buildings as well as renovations.
APPLICATIONS
1. Insulation for roofs
2. Insulation for walls
3. Insulation of ceilings
4. Substitute for gypsum and
cement boards
BENEFITS
• High thermal resistance value
• Low thermal conductivity
• Hydrophobic ( Does not absorb humidity)
• 0 (zero) flame spread in case of fire
• Perfect adherence with paste finishing, vinyl paint, elastomeric
sealants, and (solvent free) adhesives
• Controlled density (70.5lbs/m3)
• Excellent compressive strength
• Optimizes energy consumption of air conditioning and
Utility
heating equipment
• Helps to control the transfer of heat conduction, convection
and radiation
• Easy to install
• Available in different thicknesses and lengths
Without Insufoam
With Insufoam
www.insufoam.com.mx
• Does not rot or decompose
• Prevents development of mold or bacteria on its surface
POLYGLOBAL
Carretera México Toluca # 5324, Col. El Yaqui
Delegación Cuajimalpa , México D.F. 05320
US Phone: (281) 576 1611
info@polyglobal.com.mx
Mex Tel: 52 (55) 5255 6000 Mex Fax: 52 (55) 5250 8527
www.polyglobal.com.mx
What is
Insufoam
®
?
It´s a semi-rigid heat insulating extruded polystyrene foam, composed
of a smooth surface with closed cell structure that presents a real
long-term solution.
Insufoam does not absorb water as with polyurethane or
expanded polystyrene and it bonds perfectly with
paste finishes, basecoat, mortars, concrete, acrylic
sealants, prefabricated and vinyl paints. The best solution
for eco friendly homes:
ALGUNAS CARACTERISTICAS:
FEATURES:
• No investment in costly machinery
• Thanks to its formula it does not develop mold or bacteria
on the surface (does not rot)
• National and international quality and safety certificates
• R5 Value per inch thick
• Available in different thicknesses and lengths
• Produced with the highest standards of quality
• Made in Mexico
Thermal resistance loss percentage
minimum acceptable value
Weight: Approximately 4.7lbs per standard board of 1” thick,
in 4 x 8 ft measurements.
Thickness
R
7.5
2.5
:
Width & Length
Finish
4ft x 8ft
4ft x 8ft
4ft x 8ft
2ft x 8ft
2ft x 8ft
straight
Insufoam (Extruded Polystyrene)
Cornice cut
Note: Special lengths can be fabricated upon request to minimize
waste material. Speak to one of our sales representative.
PUR (Polyurethane)
EPS (Expandible Polystyrene)
Eco Friendly Housing
Today, concepts such as bio-construction are ever more present
when building or choosing a home. The three fundamental
principles of the bio-construction are:
- Production of clean and renewable energy
- Efficiency and energy saving lighting
- Efficient use of electro domestic equipment and
heating or air conditioning
Installation of Insufoam optimizes energy consumption
in houses up to 20 %.
Without a doubt, Insufoam is your thermal ally.
Distributed by:
Technical Information and Distribution:
Carretera México Toluca # 5324, Col. El Yaqui
Delegación Cuajimalpa, México D.F. 05320
Tel: 52 (55) 5255 6000 ext. 405 al 407
Fax: (55) 5250 8527, Cel.: 011 52 (55) 5959 4539
Id: 52*173491*22
USA: (281) 576 1611
Contact: info@polyglobal.com.mx
www.polyglobal.com.mx
Insufoam
H i g h R e s i s t a n c e E x t r u d e d Po l y s t y r e n e I n s u l a t i o n
4000
¡Your thermal ally!
®
THE BEST SOLUTION FOR FLOOR THERMAL INSULATION
Insufoam 4000 is a thermal insulation material with the best performance for thermal insulation of floors.
With its resistance to compression, zero absorption of humidity and its load capacity, it offers the best
cost-benefit results and the longest lifespan of the system.
BENEFITS
1. Availability in different thicknesses and lengths
2. Zero water absorption
3. High value of thermal resistance
APPLICATIONS
• Insulation of floors in cold chambers
• Insulation of floors in distribution centers of controlled
temperature
4. Immediate availability in standard measurements
Insulation system example
Finish
5. No maintenance needed
Concrete
Strip
6. Long term thermal stability
7. Saves energy
Insufoam 4000
®
8. Acts as a double barrier for vapor
9. Resistance to compression: 40 pounds / in2
10. Adapts to the best insulation floor system with
prefabricated or traditional floors
11. Excellent dimensional stability
12. Prevents energy escape by cooling floors and subsoil
www.insufoam.com.mx
POLYGLOBAL
Carretera México Toluca # 5324, Col. El Yaqui
Delegación Cuajimalpa , México D.F. 05320
US Phone: (281) 576 1611
info@polyglobal.com.mx
Mex Tel: 52 (55) 5255 6000 Mex Fax: 52 (55) 5250 8527
www.polyglobal.com.mx
What is
Insufoam 4000
®
?
It is the best thermal insulation material for floors due to its hydrophobic
characteristics, resistance to vapor, strong gradient of vapor pressure, static
and dynamic loads, as well as its high resistance to compression.
Concrete
Insufoam 4000
®
Vapor Barrier
Soil
Floor Insulation of cold chamber
Advantages
Correct use of Insufoam 4000 panel allows insulation, avoids loss of energy
and assures correct thermal energy distribution in the building.
Easy to Install
The availability of lateral cuts in half wood and straight makes installation of
floor insulation systems very simple.
Thickness
R
Width & Length
Finish
straight
7.5
4ft x 8ft
4ft x 8ft
4ft x 8ft
cornice cut
Note: Special lengths can be fabricated upon request to minimize waste
material. Speak to one of our sales representative.
:
Mechanical Resistance
Insufoam 4000 has a resistance to compression of 40 pounds / 2in and a
compression yield that bears a product with 125kPa for 50 years. The product
only undergoes 1.5% initial distortion and 2% final distortion. Its extraordinary
mechanical resistance makes it an ideal product to serve as a surface or being
installed in all floor insulation systems where all loads rest upon the insulator.
Installation:
It is recommended to install Insufoam 4000 above a firm and plane surface.
The half wood lateral cut facilitates the juxtaposition of the panels. It is
favorable to lay a vapor barrier that can either be high density polyethylene,
or aluminum foil; the cable or mesh is laid outside and then the concrete.
Distributed by:
Distribution and Technical Information:
Carretera México Toluca # 5324, Col. El Yaqui
Delegación Cuajimalpa, México D.F. 05320
Tel: 52 (55) 5255 6000 ext. 405 al 407
Fax: (55) 5250 8527,
USA: (281) 576 1611
Contact: info@polyglobal.com.mx
www.polyglobal.com.mx
Insufoam
Extruded Polystyrene Thermal Insulation for Transport Vehicles
¡Your thermal ally!
®
THE BEST SOLUTION FOR THERMAL INSULATION IN TRANSPORT VEHICLES
Ideal for use in the manufacture of dry, heat and frozen containers, ensuring greater durability, and cost
benefit relation since the weight of the body will always be the same because Insufoam does not absorb
water nor favors the formation of mold or bacteria.
APPLICATIONS
BENEFITS
1. Thermal Insulation for (urban, off road and luxury)
transport vehicles.
2. Thermal Insulation – Structure in (dry, thermal and
cooled container) cargo load transport vehicles.
3. Manufacture of isolated doors (tumble, sliding or curtain).
• Long-term stable K & R values
• Controlled high density (32Klg/m3)
• Certified with 0 (zero) spread of flame in case of accidents
• Perfect adherence with laminated finishes
4. Isolation of floors in chilled containers.
• Does not absorb water
Thermal Resistance percentage loss
• Resistance to compression of 25lbs per square inch
• Suited to a wide variety of adhesives and finishes
Minimum value accepted
• Optimizes energy consumption in cooling equipment
• Helps control heat transfer made by conduction, convection
or radiation
Insufoam (Extruded Polystyrene)
PUR (Polyurethane)
EPS (Expanded Polystyrene)
www.insufoam.com.mx
POLYGLOBAL
Carretera México Toluca # 5324, Col. El Yaqui
Delegación Cuajimalpa , México D.F. 05320
US Phone: (281) 576 1611
info@polyglobal.com.mx
Mex Tel: 52 (55) 5255 6000 Mex Fax: 52 (55) 5250 8527
www.polyglobal.com.mx
What is
Insufoam
®
?
It is the only thermal insulation rigid foam from extruded polystyrene made
into panels, manufactured by the PESA process to have a smooth surface and
closed cells with walls that are interconnected without leaving any empty
gaps. The PESA method provides a uniform structure that offers the highest
values of thermal resistance and an excellent resistance to water absorption.
Thermal resistance percentage loss
Expanded
Polyurethane
Insufoam
®
FEATURES:
• Substitutes the use of Polyurethane and Expanded Polystyrene
• Makes fabrication process more efficient
• No necessary investments in expensive machinery
• It has national and international quality and safety certificates
Insufoam is the perfect replacement for traditional materials since it
does not absorb water like polyurethane or expanded polystyrene do,
which is why the transport is lighter and pays fewer fuel as well as
having better cooling efficiency.
Thickness
R
• R5 value per inch thick
• Thanks to its formula it does not develop mold or bacteria on
7.5
the surface (does not rot)
• Available in different lengths and thicknesses
2.5
• Produced with the highest quality standards
• Made in Mexico
Width & Length
Finish
4ft x 8ft
4ft x 8ft
4ft x 8ft
2ft x 8ft
2ft x 8ft
Straight
Cornice cut
Note: Special lengths can be fabricated upon request to minimize
waste material. Speak to one of our sales representative.
:
Thermal resistance: R = 5.4 at 40 ° Fahrenheit; 5.0 at 75 ° Fahrenheit
average temperature and thickness of 1 inch
(Hour X square foot X ° Fahrenheit/BTU)
K Factor: Thermal Conductivity
It is a physical property of materials that measure heat conduction.
R factor: Thermal Resistance
It is the capacity of the material object to oppose heat flow.
Union junctions
Structure
Insufoam
®
Package
RFP finish
Resistance to the compression: It is the material capacity to withstand
the forces trying to compress it or tighten it, expressed in lbs/in2
Distributed by:
Structure
APPLICATION DETAIL
Distribution and Technical Information:
Carretera México Toluca # 5324, Col. El Yaqui
Delegación Cuajimalpa, México D.F. 05320
Tel: 52 (55) 5255 6000 ext. 405 al 407
Fax: (55) 5250 8527,
USA: (281) 576 1611
Contact: info@polyglobal.com.mx
www.polyglobal.com.mx