Woodcarvers start - Mountain Woodcarvers

Transcription

Woodcarvers start
NEW!!!! Woodcarver’s T-Shirt
Show everyone you’re a woodcarver or
love woodcarving with this 100% cotton
preshunk white t-shirt with this full color
caricature woodcarver on back and our
logo on the front chest. Great gift!
Printed in Colorful Colorado!
13M Medium
13L
Large
13XL Extra Large
13XXL Extra Extra Large
Kevlar Carver’s Gloves are
seven times more slash resistant than cotton gloves. They
are a must for carving. Washable with gripper dots, so you
can get a grip of your carving
project. Glove fits either left or
right hand. Sold as singles.
Sizes are shown in parentheses. Reg $13.49
1781 Ex Small (6)
$11.99
1771 Small (7)
$11.99
1772 Medium (8)
$11.99
1773 Large (9)
$11.99
1782 Ex Large (10) $11.99
NEW!!! Stainless Steel
Carvers Glove provides the
maximum protection with
yarns containing three strands
of stainless steel. Reversible,
can be worn on either hand.
Sold as singles. (Sizes)
1571 Ex Small (6)
$19.00
1572 Small (7)
$19.00
1573 Medium (8)
$19.00
1574 Large (9)
$19.00
1575 Ex Large (10)
$19.00
2
$20.00
$20.00
$20.00
$21.00
Woodcarver’s Tape
Wrap this tape around your
thumb for protection against
cuts. Wrap it around your fingers to prevent blisters. Large
30 yard roll, Colors vary.
1777 Carver’s Tape
$3.95
SAVE $1.90 buy two rolls!!!!
17772 Two Rolls
$6.00
NEW!!!! Leather Thumb &
Finger Guards
Need some extra protection
for your thumb or fingers? Try
these high quality thumb and
finger guards. Made with
comfortable leather & elastic
to hold in place. Made in USA.
6150 Finger Small
$1.60
6151 Finger Medium
$1.60
Knife not included
6152 Finger Large
$1.60
Custom
Leather
Knife
6153 Thumb Small
$1.60
6154 Thumb Medium $1.60 Sheath Your custom knives
6155 Thumb Large
$1.60 deserve a custom sheath.
Made from high quality
leather, this sheath will fit a
variety of carving knives.
Made in USA Colors vary.
Overall length 4”.1820 $9.00
Leather Thumb Guards
Comfortable, long lasting, split
leather. The best design for
woodcarvers protects the pad
as well as the top of the thumb.
(Pair) Made in USA
6003 Small (2)
$2.95
6001 Medium (2)
$2.95
6002 Large (2)
$2.95
www.mountainwoodcarvers.com
Leather Knife Sheaths
Protect your investment with
these leather knife sheaths.
Made to fit blades up to 2”.
Made in USA Color may vary.
9617 Sheath (1)
$1.95
96176 Six Pack
$9.95
1-800-292-6788
here with the BASICS
Canvas Pouch/Leather
Combo Apron
Perfect for whittling. Carve
where you wish, capture
chips in the pouch and
dispose. Leather front for
additional strength. Overall
length 32 .5” Made in USA
7188 Pouch Apron $29.95
Leather Front Apron
This apron was made with
power carvers and whittlers in
mind. A canvas apron with a
14”x12” leather front. Overall
length 32 1/2” Made in USA
7183 Leather Front $24.95
Hand Guard A protective
guard for the entire palm,
including the heel. Split
leather palm can be worn
under most carving gloves.
One size. Made in USA
6008 Guard Left
$13.95
6009 Guard Right
$13.95
Woodcarvers Suede
Leather Apron
Beautiful suede leather with
two pockets. A great apron at a
great price! Overall length 36”
Imported
1318 Leather Apron
$29.95
Denim Whittler’s Apron
Equipped with an adjustable
neck strap. It can be used full
length. It will also fold up to
create a large pocket to
capture your chips, secured
by hook and loop fasteners
for woodcarving. Overall
length 35” Made in USA
1320 Denim Apron $34.00
Safety Magnifying Glasses
Toss your reading glasses
aside and use safety glasses
when power carving, carving
and sharpening. Ultra comfortable, shatterproof, wraparound
Canvas Pouch Apron
lenses, quality construction &
Perfect for whittling. Carve
inexpensive. Imported
where you wish, capture chips
150 Mag 1.5
$6.99
in the pouch and dispose.
151 Mag 2.0
$6.99
Made in USA
152 Mag 2.5
$6.99
Overall length 32 1/2”
$6.99
7186 Pouch Apron
$24.95 153 Mag 3.0
Hand Mallet A reversible split
leather pad designed to absorb
shock to the palm. Suitable for
left or right hand wear. One size
fits all. Made in USA
6007 Hand Mallet
$11.95
Tool Rolls
Protect your investment.
We have tool rolls for
Dockyard tools, your palm
tools and mallet tools. All
made in USA See our
selection on page 21.
1-800-292-6788
3
8613
Flexcut Knives each knife is made with
an ash handle and high carbon steel
blade. Every blade is honed, polished
and ready to go. Made in USA
Flexcut Detail Knife Perfect for all your
carving needs. Overall blade length 1.5”
and comes to a point.
8613 Flexcut Detail Knife
$20.00
Flexcut Roughing Out Knife Large,
sturdy blade for quick wood removal.
Blade length 2”
8614 Flexcut Roughing Knife $22.00
8614
Flexcut Carving Knife Standard knife
shape and size for all types of wood
carving, blade length 1.5”
8615 Flexcut Carving Knife
$19.00
8615
KN18
Flexcut Pelican Knife Curved blade will
let you reach in areas not accessible
with a straight blade. Blade 1.75”
KN18 Flexcut Pelican Knife
$24.00
KN19
Flexcut Mini Pelican Knife
A great little detail knife from Flexcut.
Blade length1”.
KN19 Flexcut Mini Pelican
$25.00
Flexcut Mini Detail Knife Small blade
length 5/8” will get into tight places.
KN27 Flexcut Mini Detail
$25.00
KN27
Flexcut Chip Knife Sharp ready for
immediate use
KN15 Flexcut Chip Knife
$20.00
KN15
Flexcut Mini Chip Knife chip knife with
a smaller profile
KN20 Flexcut Mini Chip Knife $23.00
KN20
Mountain Woodcarver’s Carving Knife
Our best selling knife. Sharpened
1.5” blade is a standard size for all your
carving projects. Our 1 7/8” blade is a
great size for a roughout knife. USA
1425 Carvers 1.5” Knife
$15.00
1426 Carvers 1 7/8” Knife
$15.00
1427 (1425 &1426)
$25.00
Mountain Woodcarver’s
1425
1426
3015
Stubai Carving Knife One of our
best selling carving knives. Blade length
1.5” overall length 7.75”. Add $2 for pro
honing. Austria. 3015
$19.95
Stubai
Knife Protection
GOOD
BETTER
BEST
Knife not included
9621 - 36” Tubing $2.95
4
9617 Sheath $1.95e
1820 Custom Sheath $9.00
1-800-292-6788
Helvie Knives
are handmade one at a time and feature
tungsten carbide steel 58R blades, they
are sharp, stay sharp and are easily
resharpened. Handle styles are beautiful
pakkawood colored handles or Natural
Carvers made from natural woods. Wood
types will vary in Natural knives.
Made in USA
305F 1” Detail Knife
$36.95
313P 1.25” Natural Palm
$20.00
200F 1.25”Carving Knife
$36.95
313 1.25” Natural Carver
$20.00
204 1 5/8” Roughing Knife
$37.95
Helvie Knives
305F
313P
200F
313
204
OCC Tools (formerlyDenny Tools)
Handmade knives made of high carbon tool
steel hardened to RC59 and fitted with a
comfortable hardwood oak handle.
Made in USA
Super sharp ready to carve
NEW!!!
Upsweep Knives-The newest thing for
woodcarving! These knives are very
effective for removing wood, easily and
quickly. Another quality innovative knife
from OCC Tools.
1689 1 3/8” Upsweep Knife
OCC Tools
1689
$24.00
Standard size for all carving NEW!!!
1688
1688 1 3/4 Upsweep Knife
$24.00
Quickly remove wood NEW!!!
1604 1/2” Mini OCC Knife
$21.00
1604
$21.00
1603
Our smallest detail knife
1603 3/4” Detail OCC Knife
Great for eyes and detail work
1601 1” Detail OCC Knife
$21.00
1601
Slender blade makes it easy to control
1602 1 1/2” Carving Knife
$22.00
Standard size for all carving
1602
1607 2.25” Large Knife
$25.00
Long blade for confident cuts
1607
1674 Walnut 1 3/8”
Carver $25.00
Great carving knife by Mike Shipley
1675 Walnut 2” Carver
1674
$25.00
Large blade for large cuts
1676 Both Walnut Carvers
$46.00
Save $4.00
1675
1609
1612
1613
1614
1-800-292-6788
5
Flexcut Knives each knife is made with
an ash handle and high carbon steel
blade. Every blade is honed, polished
and ready to go. Made in USA
NEW!! Flexcut Super Point Knife
It can hog out the wood and the super
point will help you add detail.
KN34 Super Point
$24.00
KN34
KN35
KN36
NEW!!! Flexcut Fine Detail Knife
Slim enough to reach into those hard to
get to areas. Super sharp!
KN35 Fine Detail Knife
$24.00
NEW!!! Flexcut Radius Knife
Shave the wood away using this super
sharp knife with a radius edge.
KN36 Radius Knife
$24.00
NEW!!! Flexcut Hooked Skew Knife
Perfect for relief carving and more.
Easily shaves away the wood.
KN37 Hooked Skew Knife
$24.00
KN37
Upsweep Knife is used for incising and
carving detailed designs. The curved
blade is easier for shaving.
KN28 Upsweep Knife
$23.00
KN28
KN31
Mini-Detail 3/8” Skew Knife is great for
carving eye detail, feathers, cleaning
stop cuts, and making vertical cuts
where space is limited. Reach deep
with the extended shank.
KN31 Mini 3/8”Skew
$26.00
KN32
Detail 9/16” Skew Knife is great for
carving detail, feathers, cleaning stop
cuts, and making vertical cuts where
space is limited.
KN32 Detail 9/16” Skew
$26.00
KN33
Hooked Push Knife is designed for
cleaning stop cuts. For best results, the
push blade is great for making concave,
convex, and shaving cuts.
KN33 Hooked Push Knife
$26.00
Flexcut Knife Set
The perfect set for all
types of woodcarving.
Set includes a carving
knife, a detail knife, a
pelican knife and
a mini pelican knife
and a tool roll.
KN100
$80.00
6
Flexcut Knife Sets on Page 12
Flexcut Knife Roll
This tool roll will
accept 4 of your
favorite knives.
Protect your knives
with this knife roll.
KN00
$10.00
1-800-292-6788
OCC Tools formerly Denny Tools
made from high carbon tool steel
hardened to RC59 and fitted with a
comfortable hardwood handle. Super
sharp and ready to carve. Treat yourself
to a great tool, used by carvers and
instructors everywhere! USA
1609 #3 1/2 Gouge
1609
1681
$24.00
Small enough to reach into tight areas
1682
1681 #3 3/4” Gouge NEW!!!
$24.00
Perfect size for most carvings
1612
1682 #3 1” Gouge NEW!!!!
$27.00
Everyone needs a wood hog
1612 #5 1/2” Gouge
1683
$24.00
Slightly deeper for removing more wood
1683 #5 3/4” Gouge NEW!!!
$24.00
1684
A must for your tool box
1684 #7 1/2” Gouge NEW!!!
$24.00
Medium deep removes more wood
1685 #9 1/2” Gouge NEW!!!
1685
$24.00
Deepest for scooping out the wood
1686 1/4” V Tool NEW!!!
$24.00
Perfect for most jobs
1686
1687 3/8” V Tool NEW!!!
$25.00
Medium sized for confident cuts
1614 5/8” V Tool
$27.00
1687
Super scooping V-Tool
All other OCC Tools are available by special
order. Call for availbilty1-800-292-6788
1614
1741
1742
1743
1744
Warren Super Sharp Tools
WOW!! These are the sharpest tools we stock.
Try them, you’ll be hooked!!! High quality
laminated tool steel makes these tools super
sharp, with extra long edge retention. These
tools are ground to a mirror edge and hardened
to Rockwell 63-64C. They are super sharp and
ready to carve. Overall length 6.5”. Imported
7181 Add a Tool Roll
$11.00
1745
1746
1747
1748
1741 #3-12mm Shallow Gouge
1744 #5-12mm Gouge
1745 #5-15mm Gouge
1746 #5-18mm Gouge
1747 #7-12mm Deep Gouge
1748 #7-15mm Deep Gouge
1756 Set of Eight Super Sharp Tools
1-800-292-6788
$15.95
$15.95
$15.95
$15.95
$15.95
$15.95
$15.95
$15.95
$120
7
2808
2817
2804
2818
2820
2819
Woodcarver’s Set
Great set for beginners. Includes all the
necessary tools for small to medium
sized projects. Hand forged, heat
treated & tempered, high quality tool
steel. Tool length 5”. Made in USA
Are you buying sharp tools?
We sharpen all Ramelson Tools.
<3117 Woodcarvers Set $39.00
Individually
#2808 Shallow gouge
$9.00
#2817 3/8” Skew
$9.00
#2820 1/8” Shallow gouge $9.00
V-Tools
2800 Sub Mini 1/16”
2802 Mini 2mm
2803 Small 1/8”
2804 Standard 3mm
Veiners
374 1/8” Veiner
376 3/16” Veiner
379 1/4” Veiner
$10.00
$10.00
$9.00
$9.00
$11.00
$18.00
$20.00
#2819 Bent chisel 3/8”
#2804 1/8” V-tool
#2818 3/8” Dbl chisel
Gouges
2805 Sub Mini 1/16” $10.00
2806 Mini 2mm
$10.00
2807 Small 1/8”
$9.00
2808 Standard 7mm $9.00
Gouges
2830 #3 1/2” Gouge
2831 #3 3/4” Gouge
2833 #5 1/2” Gouge
2834 #5 3/4” Gouge
$20.00
$29.00
$20.00
$29.00
$11.00
$9.00
$9.00
$9.00
Veiners
2811 1.5mm Veiner $11.00
2812 2mm Veiner
$11.00
2813 3mm Veiner
$11.00
2836 #7 1/2” Gouge $23.00
2838 #9 1/2” Gouge $23.00
Instructor’s
Six Pack
Skylar
Johnson’s
Carving Set
Use what Skylar
uses for his small
to medium sized
carvings. Includes
a sharp carving knife,
1/8” & 1/4” sharp gouge and 1/8” & 1/4”
sharp v-tool. A $55.00 value
3507 Carving Set
$50.00
$11.00
8
includes
(6) sharpened
MWI Carving
Knives,
(6) Kevlar
carving gloves
and (2) rolls
woodcarver’s tape. A $169 value. Call in your
order 1-800-292-6788 . Gloves available in XS,
S, M, L and XL, you can mix gloves sizes.
3508 Instructor’s Six pack
$125.00
Please call in this item, so we can get your sizes of gloves needed.
1-800-292-6788
1248
1249
1250
1251
Palm Tools
Our best selling palm tools. Overall length 5”,
the size preferred by most carvers. Made by
Sculpture House USA using high quality tool
steel, which makes the edges durable and
easily sharpened and maintained. USA
We hone these for immediate use.
Save money and buy the set.
1256 Set of Eight (Save $$$)
$80.00
1252
1253
1254
1255
1248 Chisel #1-10mm
1249 Skew #2-10mm
1250 V-tool 8mm
1251 Long Bent V-tool 5mm
1252 Fishtail #5-10mm
1253 Gouge #10-8mm
1254 Short Bent Gouge #8-8mm
1255 Long Bent Gouge #6-8mm
$10.95
$10.95
$10.95
$12.95
$10.95
$10.95
$10.95
$10.95
$11.00
Super Sharp
Minature Tools
Are you into really
sharp tools? Then
these are the ones.
Our customers have
loved these v-tools for
years, now available in
small and medium
gouges, super sharp
and ready to carve.
Overall lengths 5.5” to
6”. Great for texturing
and detail work.
Imported.
7201 1.5mm V-tool
7202 3.0mm V-tool
7203 4.5mm V-tool
7210 6.0mm V-tool
7211 1.5mm #7 gouge
7212 3.0mm #7 gouge
$8.99
$8.99
$8.99
$12.99
$8.99
$8.99
7213 4.5mm #7 gouge
7214 6.0mm #7 gouge
7215 7.5mm #7 gouge
7216 9.0mm #5 gouge
7217 9.0mm #3 gouge
7189 12 Pocket Tool Roll
$8.99
$8.99
$8.99
$8.99
$8.99
$11.00
Stubby Hand Tools
Our most popular large size hand tools. Overall
length 5.5”. These tools will remove wood
quickly. Make larger, cleaner more deliberate
cuts with these great tools from Sculpture
House USA. Made from high quality tool steel.
We hone these tools for immediate use. Save
1261
$5.70 buy the set.
1261 Fishtail Gouge #5-20mm
$15.95
1717 Rounded #5-20mm
$15.95
1720 Long Bent #6-14mm
$15.95
1718 Long Bent v-tool 13mm
$15.95
1707 Chisel #1-16mm
$15.95
7020 Stubby Skew #2-13mm
$15.95
1708 Stubby 6 Pc Set
$90.00
$11.00
1717
1720 1718
1-800-292-6788
1707
7020
9
Warren Traveler Kit
Kit includes a walnut handle, large carving
blade, six detail blades, one large v-tool and one
long bent gouge all in a traveling case. Sharp.
Made in USA Save $6.50
1636 Warren Traveler
$47.00
Carbon Steel 5/16” Tang
Warren Whittler’s Kit
Includes Warren’s Burl look handle
and six 5/16” tang detail blades .
(#1645 thru #1650) Save $2.50
KB3N
$20.00
1/2” Tang
Warren Handles
1307
$14.99
1651 $5.00
1645-$1.25
1646-$1.25
1652 $5.00
1647-$1.25
1769
$15.99
1653 $5.00
1648-$1.25
1649-$1.25
1654 $5.00
1650-$1.25
1310
$15.99
1656 $5.00
1664-$1.25
1657 $5.00
1663-$5.95
Right
1716
$15.99
1659 $5.00
1662-$5.95
Left
1661 $6.95
Right
1311
$16.99
1660 $6.95
Left
above
Warren High Carbon Steel Blades
These blades will fit any of the Warren handles shown
above. They are sharp and can be resharpened. USA
^Warren Interchangeable
Handles will fit any of 5/16” to 1/2”
tang blades shown at left. USA
closed
NEW!!!! Folding Strop
Great to touch up your knives and small hand tools. Small
6x1” compact design. Stropping surface 4 x3/4” smooth
leather surface reverses to rough leather. Made in USA.
5024 Folding Strop
$14.95
Pro Pumpkin Carving Tool Kit
by Warren Tool Company
Lock jaw handle with blades for your
pumpkin carving. Sharp. USA
9619 Pumpkin Kit
$21.99
9620 Blades Only (5)
$6.95
10
Extreme Pumpkin
Carving Book
#8060 $14.99
opened
Make Your Own Handle Kit
Just the brass fittings to make a
handle & wrench that will accept
any Warren blades and gouges.
Made in USA
3017
$11.99
1-800-292-6788
You will love these tools. The smallest of carving tools, super sharp,
Dockyard
Micro Tools easy to handle and will make the finest of cuts. Length 5.25”. USA
Actual Size
G1500 1.5mm Gouge $15
G2000 2.0mm Gouge $15
G3000 3.0mm Gouge $15
G4000 4.0mm Gouge $15
G5000 5.0mm Gouge $15
Save $16.00 buy the set!
1236 Gouge Set
$59
1590 1.5mm V-tool
$15
2090 2mm V-tool
$15
3090 3mm V-tool
$15
4090 75 degree v
$15
1192 V-Tool Set
$47
1279 2mm chisel
$15
2090 2mm v-tool
$15
G2000 2mm u gouge
$15
G3000 3mm u gouge
$15
G4000 4mm u gouge
$15
1241 Sculpture Set
$59
1264 2.4mm dogleg
$15
1263 3.25mm dogleg $15
4090 75 degree v-tool $15
G4000 4mm u gouge $15
1244 Expansion Set $63
1265 2mm dogleg
$15
1264 2.4mm dogleg
$15
1276 2.75mm dogleg $15
1263 3.25mm dogleg $15
Popular Set!
1193 Dogleg Chisels $55
1277 1.5mm plough
$15
1382 1.5mm chisel
$15
1590 1.5mm v-tool
$15
G1500 1.5mm u gouge $15
1366 1.5mm skew
$15
1234 1.5mm Std Set
$55
1278 2mm plough
$15
1279 2mm chisel
$15
2090 2mm v-tool
$15
1369 2mm skew
$15
1233 2mm Std Set
$55
1280 3mm plough
$15
1281 3mm chisel
$15
3090 3mm v-tool
$15
1372 3mm skew
$15
1232 3mm Std Set
$55
Canvas Dockyard Tool Roll
holds 12 Dockyard tools. USA
7182
$11.00
Leather Dockyard Tool Pouch will hold five
of your favorite Dockyard Tools. USA
7184
$8.00
Dockyard Strop Keep them sharp
with this strop. Has all the profiles for gouges
and v-tools manufactured by Dockyard. Keep
your tools in tip top shape with this strop,
abrasive and storage pouch. Reg $28.00 USA
#1365
$25.95
I ordered some carving tools from you on a
Thursday around noon, and had them in
my mailbox the NEXT DAY by noon.
Kudos to your customer service!
Maggie B.
Lafayette CO
1-800-292-6788
11
Flexcut Beginner
Palm and Knife Set
Get started today with
this beginner carving
set. Includes carving
and detail knives, a vtool and gouge.
A $76.30 value
KN600
$67.00
Flexcut Detail Knife
Set includes a mini Chip
knife, mini Detail knife, a
mini Pelican Knife and
gold sharpening
compound.
A $78.35 value.
KN400
$65.00
Flexcut 3 Knife Starter
Our most popular
knives include a
carving , detail and
roughout knife.
Includes gold sharpening compound.
A $65.55 value
KN500
$53.00
Flexcut Chip Carving
Includes a large chip
knife, small chip knife,
skew knife and gold
sharpening compound.
A $64.65 value.
KN115
$55.00
Flexcut Beginner Craft
Carver Set
A beginner carving set
including a carving
basswood boot blank,
61 page carving
manual, instructional
DVD, hardwood handle,
1/4” V-tool, 9/16” skew
and #11 1/4” gouge.
A $62.75 Value
SK110
$38.00
Flexcut Whittler’s Kit
includes a mini Detail
Knife, a detail knife and
sharpening compound.
A $49.30 value
KN300
$44.00
Beginner’s Set
Five of the most useful sizes and
sweeps from Flexcut. Tool length 7.5”.
Start carving today with this great set!
Value $84.90
8606 Regular Set
$75.00
Super Wide Set
Tool sizes made for quick wood removal.
Great for rough out and relief carving.
Reg. $77.76
8608 Super Wide
$70.00
12
Flexcut Knife Set
with Tool Roll
The perfect set for all
types of woodcarving. Set includes a
carving knife, a detail
knife, a pelican knife
and a mini pelican
knife and a tool roll.
A $97.75 value
KN100
$80.00
Mini Palm Set
includes gouges and v-tools in 1/8” size,
veiner in 1/16” . Perfect tools for the finest
details. Value $71.55
8607 Mini Palm
$65.00
1-800-292-6788
Flexcut Deluxe Carver Set
Includes a carving knife, 90 minute DVD Relief Carving,
Slip Strop™, sharpening compound, tool manual, quick
connect wood & ABS handle and 16 of the most popular
profiles from Flexcut all in a handsome wooden box.
A $310.65 VALUE
Our price $195.00
SK108
5pc Carvers Set
contains 4 carving tools
(shallow gouge, deep
gouge, veiner and v-tool),
manual, carving blank, 11
pocket tool roll and handle.
SK106
$49.00
11pc Carvers Set
contains 10 carving tools, manual,
carving blank, 11 pocket tool roll
and handle.
SAVE!!!!
SK107
$95.00
Thumbnail Ground Set
includes 3/16”, 5/16”, 3/8” ,1/2” deep
gouges. Quickly scoop out the wood.
Reg $85.45
FR920 Thumbnail Set
$75.00
NEW!!! Roughout Set
Includes 5/8” 70° v-tool, #8 7/8” deep gouge,
#5 1 1/16” gouge and #3 1 1/8” gouge. Get it
done with these profiles.
LH904 Roughout Set
$75.00
1-800-292-6788
13
With Handle
FR600
FR323
FR305
FR443
FR400
FR700
$18.00
$18.00
$17.00
$19.00
$19.00
$20.00
FR802 $20.00
FR601 $18.00
FR401 $19.00
FR426
FR306
FR446
FR701
$19.00
$17.00
$19.00
$20.00
Without Handle
SK600
SK323
SK305
SK443
SK400
SK700
$13.00
$13.00
$12.00
$13.00
$13.00
$15.00
SK802 $15.00
SK601 $13.00
SK401 $13.00
SK426
SK306
SK446
SK701
$13.00
$12.00
$13.00
$15.00
FR428 $19.00
FR402 $19.00
FR702 $20.00
SK428 $13.00
SK402 $13.00
SK702 $15.00
FR800 $20.00
FR801 $20.00
FR703 $20.00
SK800 $15.00
SK801 $15.00
SK703 $15.00
FR602
FR309
FR409
FR408
$18.00
$17.00
$19.00
$19.00
SK602
SK309
SK409
SK408
$13.00
$12.00
$13.00
$13.00
Flexcut Palm
Handle Tools
with a comfortable hardwood
handle. Overall
length of 5”,
easy to maneuver. Sharp and
ready to carve.
We carry the
most popular
sizes and
sweeps.
SK Series
tools without a handle.
Made to be used with the
quick connect handles
below. We carry the most
popular sizes and sweeps.
FR413 $21.00
SK413 $16.00
FR803 $21.00
FR317 $19.00
FR412 $21.00
SK803 $16.00
SK317 $14.00
SK412 $15.00
FR760 $21.00
SK760 $16.00 Palm Handle 2” ash handle
SK102
SK100
SK103
Quick Connect Handles
14
FR603 $19.00
FR307 $19.00
FR403 $20.00
SK603 $14.00
SK307 $13.00
SK403 $14.00
FR706 $21.00
SK706 $16.00
FR735 $21.00
SK735 $16.00
SK102
$15.00
SK1023-3 pack
$30.00
ABS Handle this 3” ABS
plastic handle will give you
an exceptional grip.
SK100
$15.00
SK1003-3Pack
$30.00
Power Handle 4.5” ash
handle with longer length
will allow for greater power
for larger cuts.
SK103
$15.00
SK1033-3 pack
$30.00
1-800-292-6788
Flexcut’s Carving Jack™
The Flexcut jack-knife is the first folding multitool designed for the needs of the woodcarver.
At 3.5 ounces and 4.25” closed it’s the ultimate
in portability. Here’s what you get, a.) a hook
knife, b.) gouge scorp, c.) straight gouge, d.)
straight chisel, e.) v-scorp and f.) detail blade.
Bonus items include a leather belt sheath,
SlipStrop ™ with Flexcut’s ™ Gold honing
abrasive. Sharp.
JK91 Carving Jack ™
$145.00
The Tri-Jack Pro™ is the newest multi-tool in
Flexcut’s jackknife series. As its name suggests, the Tri-Jack has three blades that lock in
place – a roughing knife, detail knife, and minicutting knife. The well designed handle minimizes hand fatigue and is made of aerospacegrade aluminum with a quarter-cut cherry inlay.
4.25” closed. Sharp
JKN95 TRI-Jack Pro
$89.00
Whittlin Jack by Flexcut
A perfect portable knife for whittling anywhere.
Includes a 2” roughing blade and 1.5”detail
blade. It weighs in at just 3 oz and is just 4” long
when closed. Super sharp ready to carve.
JKN88 Whittlin’ Jack
$50.00
The Detail Jack™ can handle a variety of
projects start to finish. Its single detail knife
quickly removes wood from convex surfaces,
while its fine point is perfect for detailing
delicate areas. The knife handle is crafted from
aerospace-grade aluminum and is ergonomically designed to allow a strong grip for long
periods of carving with minimal hand fatigue.
4.25” closed. Sharp
JKN90 Detail Jack
$39.00
NEW!!!! POCKET WHITTLER™ The ultimate
wood carvers pocket knife! The blade is
perfectly shaped for better carving & features a
razor sharp edge and V-grind for easy resharpening. It folds when closed & locks
securely when fully opened . Contoured handle
& all contact points are hand polished for
smooth operation & extra comfort. Blade
features include: custom blade design, V-grind,
high-carbon 1095 steel & RC 61 hardness.
Size: closed 3.75", open 5.5", sharpened blade
section 1.5", thickness 3/8". Handmade in USA
5500 Pocket Whittler
$59.95
NEW!!!! Folding Knife Belt Sheath Black
nylon construction with velcro closure. Fits
folding knives up to 4 1/2" closed. Can be worn
on belt in horizontal or vertical position. Fits all
pocket knifes shown above.
Super price! Imported.
5503 Knife Belt Sheath
$7.00
1-800-292-6788
15
Founded in 1883 as Ettl Studios, Sculpture House Inc, a US
corporation, is known throughout the world as the premier
source for sculptor’s tools. With a history of tradition and
manufacturing integrity, they manufacture and distribute the
world’s most complete line of sculptor’s products for wood carving used by professionals and
amateurs alike. Here are the specifics on the tools from Sculpture House USA. They are all
closeout, long handled tools ranging from 9” to 11” in overall length, suitable for hand and/or
mallet carving. They are all fitted with a hardwood handle. They all come unsharpened and we
do recommend you request our sharpening service. The steel (grade 1095C) is high carbon
steel, tempered or heat treated to harden the steel so it maintains a sharp edge, will range
approx. 59 to 62 on the Rockwell Black Diamond hardness testing device. The benefits are
clear, an American made tool, hand forged with high carbon tool steel, made to last and
maintains a sharp cutting edge at manufacturer’s closeout prices. Optional sharpening
service listed below.
Sculpture House Closeout Sale- INCREDIBLE LOW PRICES!!!!
Hurry quantities are limited to stock on hand . Sizes are + or - 1mm.
# 1 Chisel #1 Chisel Approx Sizes & Sweeps
3mm 5mm 6mm 8mm
10mm
Straight
3mm
4mm
5mm
6mm
8mm
10mm
12mm
14mm
16mm
18mm
20mm
22mm
25mm
30mm
32mm
50mm
Reg
$24
$24
$24
$24
$24
-$24
-$26
$26
$26
--$40
$42
$50
11mm
13mm
14mm
Fishtail
Sale
$12.00
$12.00
$12.00
$12.00
$12.00
$12.00
$13.00
$13.00
$13.00
$20.00
$21.00
$25.00
Reg
---$24
-$24
-$26
$26
-$26
$30
-$42
16mm
Long Bent
Sale
$12.00
$12.00
$13.00
$13.00
$13.00
$15.00
$21.00
Reg
$24
$24
$24
$24
$24
-$24
-----$30
---
20mm
Short Bent
Sale
$11.00
$11.00
$11.00
$11.00
$11.00
$11.00
$14.00
Reg
$24
$24
$24
$24
$24
$24
$24
-$26
$26
$26
-$30
$40
-
Sale
$11.00
$11.00
$11.00
$11.00
$11.00
$11.00
$11.00
$12.00
$12.00
$12.00
$14.00
$19.00
#2 Skew Chisel #2 Skew Chisel approx Sizes & Sweeps
3mm 5mm 6mm 8mm
10mm
Straight
3mm
5mm
6mm
8mm
10mm
12mm
14mm
16mm
18mm
20mm
22mm
25mm
30mm
32mm
$24
$24
$24
$24
$24
$24
$26
$27
$30
-
13mm
14mm
Fishtail
$12.00
$12.00
$12.00
$12.00
$12.00
$12.00
$13.00
$13.00
$15.00
Unsharpened Sharpened
16
11mm
-$24
$24
$24
$24
$24
$26
$26
$27
$30
---
$12.00
$12.00
$12.00
$12.00
$12.00
$13.00
$13.00
$13.00
$15.00
16mm
Long Bent
$24
$24
$24
$24
$24
$26
$27
$30
-
$11.00
$11.00
$11.00
$11.00
$11.00
$12.00
$13.00
$14.00
20mm
Short Bent
-$24
$24
$24
$24
$24
--$26
$26
$27
$30
$40
$42
$11.00
$11.00
$11.00
$11.00
$11.00
$12.00
$12.00
$13.00
$14.00
$19.00
$20.00
Optional Sharpening Cost
All V-Tools $3 each
Tools over 25mm (1 inch) $3 each
Tools under 25mm (1 inch) $2 each
1-800-292-6788
#3 Shallow Gouge #3 Shallow Gouge Approx Sizes Sweeps
3mm 5mm 6mm 8mm
3mm
4mm
5mm
6mm
8mm
10mm
12mm
16mm
18mm
20mm
22mm
25mm
30mm
10mm
11mm
Straight
Fishtail
Reg
$25
$25
$25
$25
$25
$25
----$27
--
Reg
---$25
-$25
$25
------
Sale
$12.00
$12.00
$12.00
$12.00
$12.00
$12.00
$13.00
13mm
14mm
Long Bent
Sale
Reg
-$25
$25
$25
$25
$25
-$27
---$30
$12.00
$12.00
$12.00
Sale
$11.00
$11.00
$11.00
$11.00
$11.00
$12.00
$15.00
16mm
20mm
Short Bent
Reg
$25
$25
$25
$25
$27
$27
$27
$30
$40
Sale
$11.00
$11.00
$11.00
$11.00
$12.00
$12.00
$12.00
$14.00
$19.00
# 4 Shallow Gouge #4 Shallow Gouge Approx Sizes & Sweeps
3mm 5mm 6mm 8mm
10mm
Straight
4mm
6mm
8mm
10mm
12mm
16mm
18mm
20mm
25mm
$25
$25
$25
$25
$26
$26
-
$12.00
$12.00
$12.00
$12.00
$13.00
$13.00
11mm
13mm
14mm
Fishtail
$25
$25
$25
$26
$26
-
16mm
Long Bent
$12.00
$13.00
$13.00
Short Bent
$25
$30
-
$12.00
$12.00
20mm
$12.00
$14.00
#5 Shallow Gouge #5 Shallow Gouge Approx Sizes & Sweeps
3mm 5mm 6mm 8mm
10mm
Straight
3mm
4mm
6mm
8mm
10mm
14mm
16mm
18mm
20mm
22mm
25mm
$25
$25
$25
$25
$25
$26
$27
$30
$12.00
$12.00
$12.00
$12.00
$12.00
$13.00
$13.00
$15.00
11mm
13mm
14mm
Fishtail
$25
-
16mm
Long Bent
$12.00
$27.00 $12.00
-
20mm
Short Bent
$25
$25
$25
$25
$27
$27
$30
$11.00
$11.00
$11.00
$11.00
$12.00
$12.00
$14.00
#6 Gouge #6 Gouge Approx Sizes & Sweeps
3mm 5mm 6mm 8mm
3mm
4mm
5mm
6mm
10mm
12mm
14mm
16mm
18mm
20mm
22mm
25mm
30mm
10mm
11mm
Straight
Fishtail
Reg
$26
$26
$27
$28
$28
$28
$29
$30
$32
$34
$45
Reg
$26
$26
$28
$28
$30
$34
$45
Sale
$13.00
$13.00
$13.00
$14.00
$14.00
$14.00
$14.00
$15.00
$16.00
$16.00
$22.00
13mm
14mm
Long Bent
Sale
$13.00
$13.00
$14.00
$14.00
$15.00
$16.00
$22.00
Reg
$28
$28
$30
$32
$34
$44
Sale
$13.00
$13.00
$15.00
$16.00
$15.00
$22.00
16mm
20mm
Short Bent
Reg
$26
$26
$26
$28
$28
$28
$34
-
1-800-292-6788
Sale
$12.00
$12.00
$12.00
$13.00
$13.00
$13.00
$15.00
17
Sculpture House Closeout Tools
#7 Gouge #7 Gouge Approx Sizes & Sweeps
3mm 5mm 6mm 8mm
10mm
Straight
4mm
5mm
6mm
7mm
8mm
10mm
12mm
14mm
16mm
18mm
20mm
22mm
25mm
32mm
34mm
$26
$26
$26
$26
$26
$30
$30
-
$13.00
$13.00
$13.00
$13.00
$13.00
$15.00
$15.00
11mm
13mm
14mm
Fishtail
$26
$26
$26
$26
$26
$26
$29
$30
$30
$30
$55
16mm
20mm
Long Bent
$13.00
$13.00
$13.00
-
$13.00
$13.00
$13.00
$14.00
$15.00
$15.00
$15.00
$27.00
Short Bent
$26
$26
$26
$26
$29
$30
$50
-
$12.00
$12.00
$12.00
$12.00
$13.00
$14.00
$24.00
#8 Deep Gouge #8 Deep Gouge Approx Size & Sweeps
3mm 5mm 6mm 8mm
10mm
Straight
3mm
4mm
5mm
6mm
8mm
10mm
12mm
14mm
16mm
18mm
20mm
22mm
25mm
30mm
32mm
35mm
Reg
$26
$26
$26
$26
-$30
$32
$34
$40
$50
Sale
$13.00
$13.00
$13.00
$13.00
$15.00
$16.00
$17.00
$20.00
$25.00
11mm
13mm
14mm
Fishtail
Reg
$26
$26
$26
$26
$28
$30
$30
$32
$34
$50
-
16mm
Long Bent
Sale
Reg
$26
$26
$34
-
$13.00
$13.00
$13.00
$13.00
$14.00
$15.00
$15.00
$16.00
$17.00
$25.00
20mm
Short Bent
Reg
$26
$26
$26
$26
$26
$26
$28
$28
$30
$30
$30
$32
$32
$50
Sale
$12.00
$12.00
$16.00
Sale
$12.00
$12.00
$12.00
$12.00
$12.00
$12.00
$13.00
$13.00
$14.00
$14.00
$14.00
$15.00
$16.00
$25.00
#9 Deep Gouge #9 Deep Gouge Approx Size & Sweeps
3mm 5mm 6mm 8mm
10mm
Straight
3mm
6mm
8mm
10mm
12mm
14mm
16mm
25mm
30mm
18
$26
$26
$26
$26
$28
-$30
$34
$40
$13.00
$13.00
$13.00
$13.00
$14.00
$15.00
$17.00
$20.00
11mm
13mm
14mm
Fishtail
$26
$28
$34
$13.00
$14.00
$17.00
Long Bent
$26
$34
$12.00
$16.00
16mm
20mm
Short Bent
$26
$30
$34
1-800-292-6788
$12.00
$14.00
$16.00
3mm 5mm 6mm 8mm
10mm
11mm
13mm
14mm
16mm
20mm
#10 Deep Gouge #10 Deep Gouge Approx Sizes & Sweeps
Straight
3mm
4mm
5mm
6mm
7mm
8mm
10mm
12mm
14mm
16mm
18mm
20mm
22mm
25mm
30mm
32mm
$28
$28
$28
$28
$28
$28
$30
$32
$32
$33
$40
-
Fishtail
$28
$32
$58
$14.00
$14.00
$14.00
$14.00
$14.00
$14.00
$15.00
$16.00
$16.00
$16.00
$20.00
3mm 5mm 6mm 8mm
10mm
Long Bent
$14.00
$16.00
$29.00
11mm
$32
$40
-
13mm
$15.00
$19.00
14mm
Short Bent
$28
$28
$28
$30
$32
$32
$33
$33
$40
$58
16mm
$13.00
$13.00
$13.00
$14.00
$15.00
$15.00
$15.00
$15.00
$19.00
$28.00
20mm
#11 Veiner #11 Veiner Approx Size & Sweeps
Straight
3mm
4mm
5mm
6mm
8mm
10mm
12mm
16mm
20mm
22mm
25mm
27mm
$29
$29
$29
$29
$29
$29
$29
$32
$35
$40
-
Fishtail
$14.00
$14.00
$14.00
$14.00
$14.00
$14.00
$14.00
$16.00
$17.00
$20.00
$29
$35
$40
-
$14.00
$17.00
$20.00
Long Bent
-
Short Bent
$29
$29
$29
$30
$32
$32
$32
$40
$50
$13.00
$13.00
$13.00
$14.00
$15.00
$15.00
$15.00
$19.00
$24.00
V-Tool 70 Degree
Straight
4mm
6mm
8mm
10mm
12mm
14mm
16mm
20mm
22mm
$32
$32
$32
$45
$55
$16.00
$16.00
$16.00
$22.00
$27.00
Fishtail
V-Tool 90 Degree
Straight
5mm
6mm
8mm
10mm
12mm
14mm
16mm
22mm
25mm
30mm
35mm
45mm
$32
$32
$32
$45
$55
$65
$75
$16.00
$16.00
$16.00
$22.00
$26.00
$32.00
$37.00
Long Bent
$32
$55
-
Fishtail
-
Short Bent
$15.00
$26.00
Long Bent
$32
$70
-
$15.00
$33.00
1-800-292-6788
$32
$32
$32
$32
$42
$45
$50
-
$15.00
$15.00
$15.00
$15.00
$20.00
$21.00
$24.00
Short Bent
$32
$32
$32
$45
$45
$60
$70
-
$15.00
$15.00
$15.00
$21.00
$21.00
$29.00
$33.00
19
4025
4026
4031
4040
4032
3018
1619
1618
KN15
KN20
Chip carving is fun and easy, give it a try
today!
4025 Wayne Barton Chip Knife
4026 Wayne Barton Stab Knife
4031 Swiss Chip Knife
4040 Swiss Small Chip Knife
4032 Swiss Stab Knife
3018 Stubai Chip Knife
1619 German Chip Knife
1618 German Small Chip Knife
KN15 Flexcut Chip Knife
KN20 Flexcut Mini Chip Knife
$34.95
$34.95
$39.95
$46.50
$39.95
$21.00
$18.00
$18.00
$20.00
$23.00
Chip Carving
books on page 43
Maintain a chip knife’s
super sharp edge with
extra fine, set an edge
with medium stone..
Stone size 4x1.75x
3/8” USA
4027 Medium $32.95
4028 EX Fine $32.95
4029 Set /2 $60.00
Pro Sharpening available $2 each
Flexcut Chip Carving Set
Get this set of super sharp
knives for chip carving.
Includes a large chip knife,
small chip knife, skew
knife and bar of Flexcut
Gold Sharpening Compound.
A $64.65Value
KN115 Chip Carving Set $55.00
Transfer Paper
Waxless, greaseless, smudge
proof, erasable on sealed
surfaces, won’t bleed through
paint. Cut and use what you
need. Transfer your favorite
patterns easily. Remove with a
soft eraser. (9x13”) Imported
4038 20 sheets
$12.00
#1154 T-Square $5.95
NEW!!!
Preprinted Practice Boards
Free form designs, borders & rosettes.
Great for beginners
4036 Preprinted Boards (3)
$12.50
Plain Bass Board (no imprint)
4406 Plain Bass Board .25x4x12” $2.95e
Stamp N Chip Kit
This beginner’s guide to
chip carving includes premade designs on rubber
stamps, which eliminates
the time consuming and
frustrating process of
drawing out your designs.
Includes rosettes,
border &
free form
designs.
USA
#4037
$39.00
#1156 Compass $5.95
NEW!!!
20
1-800-292-6788
Tools not included
Tools not included
Tools not included
Leather Dockyard Tool
Pouch will hold five of your
favorite Dockyard Tools. USA
7184
$8.00
Canvas Dockyard
Tool Roll holds 12 Dockyard
tools. USA
7182
$11.00
Canvas Powergrip Tool Roll
Holds up to 12 of Warren
Powergrip tools. 8x14”. USA
7189
$11.00
Tools not included
Tools not included
Canvas Palm Tool Roll Holds
12 tools up to 7” in length. Roll
size 8”x23” with easy close.
USA
7181
$11.00
Tools not included
Canvas 22 Mallet Tool Roll
Holds 22 tools up to 11” long.
Roll size 13”x30” w/easy close.
USA
7187
$18.00
Canvas 12 Mallet Tool Roll
room for 12 tools up to 11” in
length. 13”x20”w/ easy close.
USA
7180
$15.00
Tools not included
Knife Roll
This tool roll will accept 4 of
your favorite knives. Protect
your knives with this knife
roll. KN00 $10.00
Tool Denim Pouch
room for 20 tools up to 11” in
length. Roll size 12x34” Use
zipper to close. USA
1246
$32.00
Protect Your Tools
An inexpensive way to
protect your tools and
yourself from the super
sharp edges of your carving
tools. 5/8” inside diameter x
36” high quality plastic
tubing. Cut to fit your tools.
9621 36” Tubing $2.95
19 Pocket Flexcut Tool Roll
Tool roll will accept up to 18
unhandled SK series Flexcut
tools and one interchangeable
handle. Tools not included
SK200
$13.95
I placed an order for a gift, super great
service and advice. I am thinking about
getting into carving, you are hands down
the place I will do business!
Leanne S
email
NEW!!! Burning Pen Roll
Protect your woodburning
pens and keep them safe and
in one place with this roll.
Choose 6 or 12 pocket roll.
Size 6 pk (9”x15) 12 pk
9”x25”) with easy close. Made
in USA
7192 6 pocket
$12.00
7193 12 pocket
$16.00
Flexcut’s 21 Pocket Tool
Roll
Custom made to hold 21 of
your favorite Flexcut palm
handle tools with a handy
built in strop. Tools not
included FR112
$39.95
The Woodburners
Catalog
Filled with everything for
the woodburning artist.
FREE upon request.
1.800.514.0358
1-800-292-6788
21
2626
2627
2628
2631
2629
Glues that are the choice
for woodcarvers and
wood turners USA
Insta-Cure Super Thin
This water thin viscosity
that is great for tight fitting
joints, wicks deep into
joints and cures in 1-3
seconds. (1 oz)
#2626
$5.95
Insta-Cure Gap Filling is a higher viscosity for loose fitting
joints. Bonds in 5-15 seconds (1 ounce) #2627
$5.95
Maxi-Cure Extra Thick
gap filling 1-25 seconds (1 oz) #2628
$5.95
Insta Set Accelerator used by professionals to quickly cure the
above adhesives #2629
$5.95
Un-Cure Debonder is for sticky fingers (1 oz) #2631
$3.95
Accuscribe Pro great features
make this one cool tool.
Articulating pencil head,
precision pencil sharpener,
removable compass point,
storage clip for compass, nonrocking bottom, collapses to
compact size, scribes just
about anything including eyes
for woodcarving. You’ll love this
tool. Imported
#154 Accuscribe
$18.00
Paint Stick
The perfect tool for achieving
beautiful results. Attach stick
to your carving using screw
point. Then you can easily
hold and rotate your carving
for painting, carving and
more. USA
1005
$2.95
Double Ended Stylus
used to smooth wood
fibers, transfer patterns
and more.
Imported
8039
$1.95
22
NEW!!!! Clip-on Magnifiers
clip easily to any regular
glasses to provide 3x
magnification. Simply clip to
existing glasses. Flip up and
down for instant use. Tough
polycarbonate lenses.
Imported
6682 Magnifiers
$12.00
Gimlet/Schneckenbohrer
this hard to find item is used
by Master Carvers to quickly
drill holes. Very useful.
Set 3mm, 4mm, 5mm, 6mm
(France)
1202 Gimlet Set
$14.95
Swivel Vise with Clamping Base mounts to any
benchtop up to 2” thick.
Vise rotates 360 degrees
and 0-45 swivel action in
any position. Rubber pads
protect your work.
Jaw capacity 2”.
Imported
3557 Vise
$24.95
Pounce Wheels
makes stitching, transfers
patterns. USA
1206 7/16” (15 tooth)
$7.95
$7.95
1205 1/4” (21 tooth)
12052 Pair
$15.00
Brass Brush use to clean
Saburr burs and more. Imported.
5800 Brass Brush $3.50
Eyescrews (100pc) Tiny 5/16”
length, great for your carved ornaments & more.
2360G Brass Color
$8.50
2360S Silver Color
$8.50
SAVE!! 2+ pkgs
$8.00e
NEW!!! Accusharp Sharpener Are your kitchen knives,
axes, cleavers even serrated
knives sharp as your carving
tools? Well they can be with
this sharpener. Keep the cook
happy and more with this easy
sharpener.
1904 Accusharp
$12.95
1905 Replacement Blades $8.95
1-800-292-6788
Eye Punches
high quality eye punches
with a comfortable stubby
handle. Available in three
sizes or save money and
buy the set! USA
2400 Set (3,5,7mm) $27.00
2401 3mm
$10.00
2402 5mm
$10.00
2403 7mm
$10.00
NEW!!! Character Eye
Punches feature a specially
ground flat on one side that
creates a “sleepy” eye, great
for wizards, santas, cowboys
& other characters. Includes
6 punches. Sizes: 1/8, 5/32,
3/16, 7/32, 1/4, 9/32". L. 4".
Made in U.S.A
4341 Character Set $42.95
NEW!!! Round Eye Punch Set
Create perfect eyes and
buttons on your next carving!
Simply press & twist or tap with
hammer into socket area.
Round sizes: 1/8, 5/32, 3/16,
7/32, 1/4, 9/32". Round
punches are 5"long and include
rubber pads. Made in USA
4340 Round Punch Set $39.95
8028
8029
Pocket Guide to Mixing Color Defines and
illustrates color harmonies. Includes a
personal palette and grey scale & value
guide. Easy to use and understand. USA
8028
$4.00
Color Wheel-Primary Color Mixtures, Tints
and Tones, Complementary Harmonies,
Warm and Cool Colors, Gray Scale,
Personal Palette Color Harmonies &
Definitions. USA 8029
$5.00
Transfer Paper
Waxless, greaseless,
smudge proof,
erasable on sealed
surfaces, won’t bleed
through paint. Cut and
use what you need.
Transfer your favorite
patterns easily.
Remove with a soft
eraser. (9x13”)
imported 20 sheets
4038
$12.00
JoSonja Sampler Paint Kit Everyday craft paint will
not give you the delightful results or the quality you will
get from this 10 tube palette sampler. Contains 20ml
size of titanium white, warm white, napthol red light,
ultra blue deep, pine green, brown earth, carbon
black, burgundy, and rich gold.
8000
$19.95
Pyro Paper
Special translucent
pyrographer’s paper,
print or trace a picture
on it, tape it to wood or
a gourd and woodburn
right through it. Laser
and inkjet printable.
Works best with
adjustable temperature woodburners. 50
sheets 8.5x11” with
instructions. USA
9982
$6.95
Jo Sonja's Iridescent Specialty
Colour Set contains the following:
Blue, gold, green, red, turquoise
and violet iridescent.
8001
$19.95
1-800-292-6788
23
Detail Sander This unique abrasive tool was
developed for those hard to reach sanding
jobs. Unlike other abrasive products this
sanding stick gives you two different surfaces and the ability to use the entire
abrasive material. Replaces your folded
sandpaper and files. Sander is loaded with
belt. Size 1/4”x6”.
2259 3 Pack of Detail Sanders
$7.95
2247 Red 120 Grit Detail Sander $3.00
2248 Blue 240 Grit Detail Sander $3.00
2249 Grn 320 Grit Detail Sander $3.00
2260 3 pk
2256 4-120
2257 4-240
2258 4-320
Sanding Mesh NEW!!!
One of our most requested products. This
screen or mesh sanding paper, will make your
sanding a breeze. Long lasting, flexible and
does not clog like sand paper.4.5”x 24” long.
1959 Sanding Mesh 120 grit
$4.95
$4.95
$4.95
1956 Set/3 (120,240,400 grit)
$12.00
Bands (120, 240, 320) $3.95
grit bands
$3.95
grit bands
$3.95
grit bands
$3.95
Bit not included
Swivel Head Pin Vise
This handy little vise is perfect for detail
work. It has a knurled handle, swivel head
and four different split collets for 0-1/8”
capacity. Tool measures 3 7/8” long. Use
with your power bits Imported.
3387 Pin Vise
$9.95
Gold Sandpaper This highly sought after Swiss
type sandpaper will make your job much easier.
No other sandpaper on the market can match
this gold sandpaper for sanding the most severe
contours. You can use it by hand, load it into
sanding mandrels and much more.
1917 400 Grit (3x36” roll)
$3.95
1918 220 Grit (3x36” roll)
$3.95
1919 120 Grit (3x36” roll)
$3.95
1920 Set/3 (400,220,120 grit)
$10.00
Silent Mallet features a tough
urethane striking head, that is nonmarring and very quiet to use, easy on
your joints too. Urethane also provides
plenty of mass for your tough carving
projects. The finely sanded maple
handle is turned to yield a comfortable
grip for all day use. Imported
1314 18 oz mallet
$25.95
1315 24 oz mallet
$26.95
1316 30 oz mallet
$27.95
Mini Mallet approx 6 oz,
overall length 7” & 2” head
diameter. (woods vary).
Great little tapping mallet for
detail work or chip style
work. Imported
5006 Mini Mallet
$12.00
24
Brass Head Mallet
Our favorite mallet for tapping
your tools through the wood.
This brass head mallet provides unequalled control,
power & balance. Imported.
1323 12oz Mallet $19.95
^Hand Mallet A reversible
split leather pad designed to
absorb shock to the palm.
Suitable for left or right hand
wear. One size fits all. Made
in USA 6007
$11.95
Heartwood Mallet
Approx 12 oz, overall length
10” with 3” head. Perfect size
and weight for most mallet
carving. Imported
9015 Heartwood
$19.95
1-800-292-6788
NEW!!! Fine Diamond Riffler Files
Ordinary riffler file teeth cut only when
pushed one way. Our extraordinary diamond
rifflers cut in any direction & unlike ordinary
steel rifflers will practically never get dull or
clog. Sets include the most useful shapes
for carving & storage case. Length: 5.5",
Shank: 3mm. (Fine 220 grit) Imported
8109 Fine 220 Grit Diamond Files $12.95
NEW!!! Coarse Diamond Riffler Files Start
with these coarse riffler files to remove and
shape wood. Our extraordinary diamond
rifflers cut in any direction & unlike ordinary
steel rifflers will practically never get dull or
clog. Sets include the most useful shapes for
carving & storage case. Length: 5.5", Shank:
3mm (Coarse 60 grit) Imported
8110 Coarse 60 grit Diamond Files $14.95
5pc Diamond File Set
Great for smoothing and sanding, wood and other
materials. Shapes included flat, half round, triangular,
square and round. Overall length 7”, widths vary from
3/16” -3/8”. Imported 3119 5pc Diamond Set
$15.95
Riffler/Rasp 8 pc Set
MEDIUM
For carving and working around
tight areas. Same profile each end.
7” Imported
2862 Medium Riffler/Rasp
$13.95
Mini Riffler Rasp Set
This set of hard-to-find shapes are approx 6” long, double
ended, double cut, medium cut and commercial quality.
Finally reach into those nooks and crannies. Imported
1489 Mini Riffler Rasp Set
$21.50
Curved Needle Nose File Set with five different tip
profiles are ideal for extremely fine shaping. These extra
fine files measure 7” long with 7/32” shanks. Shapes
include flat, triangle, half round, square and round. Great
for bark houses. Imported
2867 Curved Needle Nose Files
$8.95
Riffler/Rasp 8 pc Set
COARSE
Different profiles on each end for a
total of 16 shaping options. 9.5”
Imported
2864 Coarse Riffler/Rasp $17.95
1-800-292-6788
25
Slip Strop™ by Flexcut the secret to razor sharp tools.
Specially moulded to allow for polishing and deburring the
hard to reach areas on the inside of your v-tools and gouges
as well as the outside edge. Also a large flat surface for
stropping your knives and chisels. Apply the enclosed
abrasive and quickly polish your tools. Our best selling strop
for all your tool profiles. USA
8630 Slip Strop
$13.95
8631 Flexcut Gold Compound
$6.95
The secret to sharp tools is stropping often. Strops used with
abrasive are the best way to achieve super sharp tools. Choose
the width of the strop that will fit the blade of your largest knife.
Use #1224 Aluminum Oxide shown below with these strops.
#1224
Aluminum
Oxide 1 oz
$3.95
5022
1239
5023
4000
1229
9558
Small Strop leather with
reverse abrasive. Strop
surface 2x3” USA
5022
$7.95
Tool Box Strop leather
1.75x6” USA
1239
$5.95
Super Strop leather with
high grit sandpaper on
reverse. Stropping surface
1 .75 x 7.5” USA
5023
$9.00
Hone Strop flat surface for
knives, v-end for v-tool and
round edge for gouges.
1 3/8x6 5/8” special rubber
material.
4000
$15.00
Flex Strop rigid area for
knives, flexible area for
gouges, a v end for v-tools,
rounded end for gouges, high
grit sandpaper for touch
up.1.5x11.5” USA
1229
$18.00
Pro Strop rounded and v
edge stropping area 3.5x9”
double sided. USA
9558
$20.00
#401-Large 2.75x8.5” stropping surface
Large Hone Strop
This has a larger surface for your large knives. Stopping surface area is 2.75”x8.5”. Includes a
rubber v edge for the inside of your v-tools and rounded edge for the inside edge of your gouges.
Use with the aluminum oxide abrasive shown above.
#401
$23.00
Zam
Polishing
Compound
it’s back, one of our most
requested items.
7502 1/4lb tube
$4.95
7503 1 lb tube
$9.95
26
Powdered
Aluminum Oxide
Flexcut Gold
Quickly put a
polishing compound has been bright shiny finish
specially formulated to apply to on your knives, v-tools and
the strop like a crayon. It’s
gouges. Use on any leather
blend of aluminum oxide and
bench strop. Large 1 ounce
titanium oxide abrasives will
container. Compare at $4.99
produce a high color polish.
1224 Aluminum Oxide $3.95
8631 Flexcut Gold 3oz $6.95 Save 90¢ Buy two jars!
8632 Flexcut Gold 1 oz $3.50 12242 (2) Jars
$7.00
1-800-292-6788
Profiled Sharpening Stone Pure
oilstone for razor sharp cutting
edge. With pre-profiled surface
for easy sharpening and
resharpening of your
gouges and v-tools.
Approx dimensions
3 7/8”x2 5/8”x3/4”.
8578
$19.95
A Super Buy!
Oregon Sharpening Stones
since 1928, they have been making the finest
stones. Restore edges with coarse & medium,
fine & extra fine to produce a long lasting edge,
Novaculite for the final polishing. Use with
honing oil. USA
7100 Coarse (100 grit)
$5.50
7101 Medium (180 grit)
$5.50
7102 Fine (220 grit)
$5.50
7103 Extra Fine (320 grit)
$5.50
7104 Novaculite
$5.50
7105 Set of Five SAVE!!!
$25.00
1212 Honing Oil 3 ozs.
$4.95
Double Stuff Ceramic Stone
Space aged technology for woodcarvers. One
side is fine grit for final honing the other side is
medium grit for sharpening. Compact size
1x5.25”. Comes with leather sheath USA
1220 Double Stuff
$43.95
3420
3422
Sharpening Kit
Includes two stones, a hard
Arkansas and soft Arkansas,
instructions and honing oil. USA
1211 Sharpening Kit
SALE $16.95
1212 Extra Honing Oil
$4.95
3421
NEW!!! Slip Stones Keep your tools
sharp with these inexpensive slip
stones. SUPER PRICE!
$1.50
3420 Stone 1/4x3/4x2 3/4”
3421 Bull Nose 1/4x1.5”x7.75”
$6.00
3422 Wedge 3/8x1.25x5.75”
$5.00
3423 Set of 3 above
$10.00
Ceramic Stones
Clean to use, super flat ceramic stones.
Maintain a chip knife’s super sharp edge
with extra fine, set an edge with medium
stone. Stone size 4x1.75x3/8”
4027 Medium Ceramic Stone
$32.95
4028 Extra Fine Ceramic Stone
$32.95
4029 Both Ceramic Stones
$60.00
Tri Stone Hone Set includes
coarse, medium and fine stones,
size 1/2x4”. Sharpening
instructions, 1 ounce
honing oil all in
compact
plastic tube.
1258
$9.95
1222
1215
Genuine Arkansas Oilstone
2.75" x 1 1/8" x 3/16" Medium Grit
#1222
$2.95e
Ceramic Sharpening Rod
Use on the inside of your shallow and deep
gouges 3/8x8.5” #1215
$2.95e
1-800-292-6788
27
Paper Sharpening Wheels
Our best selling and the easiest way for
you to maintain a professional edge on
your carving tools. Add your bench grinder
and you will have a professional sharpening system. Wheels will fit on a bench
grinder with 1/2 or 5/8” arbor,
3450-3500 RPM. One wheel is coated with silicon carbide which will allow you to shape and
sharpen your tools. The other wheel is for polishing and honing your tools to a razor’s edge.
Kits include additional silicone carbide grit for redressing a worn out wheel, grease, rouge and
instructions. Choose 6” or 8” wheels to fit your grinder. USA
1723 Deluxe 1”x 8” Kit
1715 Deluxe 3/4”x 8” Kit
1725 Deluxe 3/4”x6” Kit
1735 Deluxe 1”x6” Kit
$35.95
$30.95
$26.95
$30.95
Just need a honing wheel?
1726 Slotted Wheel (8x1”)
1728 Slotted Wheel (8x.75)
1729 Slotted Wheel (6x.75”)
1730 Re Conditioning Grit Kit
Abrasive Large One
Pound Bars
Green-best for power
stropping
1136 EX Fine $13.95
1137 Fine
$13.95
White Rouge
2891 White
$6.95
Power Sharpening Systems
If you want to sharpen like a Pro then you must
use what we use. Three different models,
choose size and accessories. Quiet, safe, slow
speed sharpeners will make sharpening your
tools a breeze. USA
Sharpeners from $339.00 and up
NEW!!! Powerstrop
Simply apply the
included buffing compound to the leather
wheel and let the drill do
the work of buffing the
edge. USA
Original Kit includes a standard wheel, mandrel,
$18.95
$15.95
$14.95
$8.95
Diamond Hone Tapered, great for removing
burs from your gouges Honing surface length
3”. (5/8” tapers to 1/16”) Stores in handle.
1257 Diamond Tapered Rod
$9.95
buffing compound and instructions 1230 $21.95
Deluxe Kit includes a standard wheel, a V
shaped wheel for buffing the inside of V-tools and
gouges, (2) mandrels, buffing compound and
instructions.1207 Deluxe Kit
$35.95
Diamond Sharpening Set
Sharpens quickly, stays flat, comes with
storage pouch. Sharpening surface is 2 3/4”
each. Three grits fine, medium and super fine.
Clean with water. USA
7399 Diamond Sharpening Set
$21.00
Super
Diamond
Sharpening
Block
Diamond Cards
Keep your tools sharp with these credit card
sized diamond hones. Small 2x3.25” USA
7400 Extra Fine
$12.95
7401 Fine
$12.95
7402 Coarse
$12.95
Save!!!! Buy ALL THREE
$36.00
28
Fine grit,
sharpening block
Use with water. Just a
few light strokes produces
a sharp edge. Surface size 2x6”
3301 Diamond Sharpening Block $9.95
1-800-292-6788
Bird & Animal
Eyes USA
Blue & Yellow
Epoxy Putty Tape
Cut off the amount you need
for your project. Knead the
yellow and blue together until
you have green. It will bond,
fill and seal. It can be drilled,
tapped, sawed, screwed,
sanded, filed and painted.
Applies and shapes like putty.
Ability to hold the finest of
detail. Adheres to almost any
surface. Great for setting
eyes, feet, habitat and more.
USA
7113 Roll 1 x 36”
$14.95
71136 1 x 6” piece
$2.95
Bird Feet
2300 Bluebird
$6.00
2301 Blue Jay
$9.00
2303 Chickadee
$6.00
2304 Cardinal
$7.00
2310 Goldfinch
$6.00
2317Kestrel/Sparrow Hawk $9.00
2322 Kingfisher
$8.00
2323 Meadowlark
$10.00
2327 Screech Owl
$8.00
2334 Gamble Quail
$9.00
2335 Robin
$9.00
2337 Sparrow
$7.00
2338 Spotted Sandpiper
$7.00
2340 Titmouse
$6.00
2344 Woodpecker (Red)
$8.00
2345 House Wren
$6.00
Call us for any species not listed
1-800-292-6788 they may be
available by special order.
Quickwood two part epoxy,
can be sawed, drilled, sanded
and painted. Sand Color USA
7106 Large 2 Oz
$7.95
7107 Tool Box Size 1oz $5.95
Feathering see and feel how
professional feathers are carved
with this three sided, easy to
use feathering study cast. USA
#306
$19.95
Metric Eye Drill Bit Set
The solution to perfect fitting
eye sockets is these metric
sized brad point drill bits. Sharp
brad point holds bit on center.
Set includes bits on 3mm,
4mm, 5mm, 6mm, 7mm, 8mm,
9mm, 10mm, 11mm, 12mm
with wood storage box.
8911 Metric Drill Set $19.95
NEW!!!
<Bird/Small Animal Eye Kit
Includes one pair of each
6mm, 7mm, 8mm and 9mm in
yellow, brown, dark brown
and red.(16 pair) USA
Save $15.05
EKIT
$24.95
6105
6106
6107
6108
6109
6110
6111
6112
5mm Yellow
6mm Yellow
7mm Yellow
8mm Yellow
9mm Yellow
10mm Yellow
11mm Yellow
12mm Yellow
$2.50
$2.50
$2.50
$2.50
$2.50
$2.50
$3.00
$4.00
6203
6204
6205
6206
6207
6208
6209
6210
6211
6212
3mm Brown
4mm Brown
5mm Brown
6mm Brown
7mm Brown
8mm Brown
9mm Brown
10mm Brown
11mm Brown
12mm Brown
$2.00
$2.00
$2.50
$2.50
$2.50
$2.50
$2.50
$2.50
$3.00
$4.00
6405
6406
6407
6408
6409
6410
6411
6412
5mm Red
6mm Red
7mm Red
8mm Red
9mm Red
10mm Red
11mm Red
12mm Red
$2.50
$2.50
$2.50
$2.50
$2.50
$2.50
$3.00
$4.00
6303
6304
6305
6306
6307
6308
6309
6310
6311
6312
3mm Dk Brown
4mm Dk Brown
5mm Dk Brown
6mm Dk Brown
7mm Dk Brown
8mm Dk Brown
9mm Dk Brown
10mm Dk Brown
11mm Dk Brown
12mm Dk Brown
$2.00
$2.00
$2.50
$2.50
$2.50
$2.50
$2.50
$2.50
$3.00
$4.00
Black
6503 3mm Black
6504 4mm Black
$2.00
$2.00
Fish Eyes
The finest quality fish
eyes, gold for general
freshwater fish use.
6605
6608
6610
6612
5mm Fish
8mm Fish
10mm Fish
12mm Fish
1-800-292-6788
$4.25
$4.50
$5.00
$5.50
29
<Burnmaster Eagle Woodburning Set
This set includes the Burnmaster Eagle 2-Port
wood burning power supply. The “Eagle”
features 130-watts maximum transformer, 2selectable handpiece power ports, 2-universal
handpiece power cord / adapter sets
& 2-handpiece holders. Set includes: Eagle,
2-Burnmaster® wood burning pens plus a full
selection of 10-burning tips & the Tool Bag
for storing everything! The Burnmaster® EAGLE
2-Port wood burning power supply: Imagine a
top quality wood burning system that accepts
any pen (handpiece) regardless of
manufacturer & has up to 130 watts of power
8900 Burnmaster Eagle Set
$259.95
NEW!!! Burnmaster Hawk WoodburningSet>
This affordable set has all the essentials needed
for quality wood burning. This set includes the
Burnmaster® Hawk 1-Port wood burning power
supply, pen patch cord / adapter set plus one
Burnmaster® wood burning pen and full
selection of 10-burning tips.. The Burnmaster
accepts wood burning pens by Detail Master,
Colwood , Optima, Nibsburner, Navesink,
Razertip & others with similar connections.
Burnmaster controllers feature, pro quality
components, 130-watts max. transformer,
precise variable power supply (now with micro
heat adjustment), custom designed circuitry,
reset fuse protection, all metal housing (3.5" x
4.75" x 8.5"), non-slip rubber feet, 6' power cord,
manual & 3-year warranty.
8800 Hawk Set
$199.95
Burnmaster Replaceable Burning Tips $7.95
20BM - 1/32” WritingTip
6A - 1/16” Writing Tip
1ABM - 1/8” Skew Tip
1BBM- 3/16” Skew Tip
1CBM- 1/4” Skew
10A - 1/8” Round Heel
4C - 1/4” Shader
2BBM - 1/8” Round
Burnmaster Universal Wood Burning Pen
This handpiece will accept tips from
Burnmaster, Detail Master, Colwood, Razortip
and Nibsburner. Tips are secured to the pen
with an exclusive screw post system. This
ensures an unrivaled positive contact. An
ergonomic grip and shape of the pen reduces
fatigue and keeps your hand cooler.
8902 Woodburning Pen & 10 tips
$79.95
11A - 1/8” Spear
5A - 1/4” Spear
8909 Replacement Wire
30
(460mm) 18”
$6.95
8901 Wood Burning Pen only
$29.95
1-800-292-6788
NEW!!! Nibsburner Snake Scale Tips
2226S - 1/8” Snake Tip
$9.50
2227S - 3/32” Snake Tip
$9.50
2228S - 3/16” Snake Tip
$9.50
2229S - 1/4” Snake Tip
$9.50
2230S Set 4 Snake Tips
$36.00
Nibsburner Fish Tips
2226 1/8” Fish Tip
$9.50
2227 3/32” Fish Tip
$9.50
2228 3/16” Fish Tip
$9.50
2229 1/4” Fish Tip
$9.50
2230 Set/4 Tips
$36.00
NEW!!! Nibsburner Square
Shader & Calligraphy Tips
SHS Small 1/8”
$8.00
SHM Medium 5/16”
$8.00
SHL Large 1/4”
$8.00
SAVE !!!! BUY All 4 PACKS (#1, #2, #3, #4) $32.00
Pyro Paper
Special translucent pyrographer’s paper,
print or trace a
picture on it, tape
it to wood or a
gourd and
woodburn right
through it. 50
sheets 8.5x11”
with instructions.
USA
9982
$6.95
NEW!!! Pyro
Packet #1
Flowers &
Butterflies
12 pages of
drawing, in an
assortment of
sizes, some on
color. 8.5 x x11”
USA
99821 $8.50
NEW!!! Pyro
Packet #2
Arrowheads,
Moths & Forest
Critters
12 pages of
drawing, in an
assortment of
sizes, some on
color. 8.5 x x11”
USA
99822 $8.50
NEW!!! Pyro
Packet #3
Seashells
Feathers &
Plants
12 pages of
drawing, in an
assortment of
sizes, some on
color. 8.5 x x11”
USA
99823 $8.50
NEW!!! Pyro
Packet #4
Southwestern
Designs
12 pages of
drawing, in an
assortment of
sizes, some on
color. 8.5 x x11”
USA
99824 $8.50
NEW!!! Woodburner Pen Rolls
Store your pens together with these new storage
rolls for your wood burning pens. They will hold up
to 3/4” tube and have a new quick slide closer.
Available in 6 or 12 pocket roll. Made in USA
7192 Woodburner 6 Pocket
$12.00
7193 Woodburner 12 Pocket
$16.00
Burnmaster Tool Bag
Protect, organize and
transport wood burning,
tools micro motor tools,
hand tools and more!
The unique, exclusive
design includes the
features you want in a tool
bag. Big enough to accept
all hot wire wood burners;
perfect for micro motor tool. Organizer slots and
pouches provide 20 areas ideal for wood burning
handpieces (pens), tips and accessories. Features:
super tough ballistic nylon, heavy duty zipper, stiff
walls and strong handles. 7.25"x8"x11".
8905 Burnmaster Tool Bag
$19.95
Transfer
Tool Plus
Transfer your
patterns using this hot tool. It’s easy, just
make copies (toner based or laser printer)
place them on the wood’s surface and
apply the hot tool using the button tip.
This kit includes burning tool with variable
temp.control, tool stand, eleven interchangeable points and storage case.
Also works as an inexpensive woodburner.
Heats to 950 degrees.
3828 Transfer Tool Plus
$29.95
1-800-292-6788
31
Best of Show Woodburning Kit
This 145 watt burner features two removable tip
handpieces with dual heat selectors. Switch heat to
either handpiece. Comes complete and ready to
wood burn with two cords, two handpieces with tips
1D & 2C. Our best woodburner by Nibsburner and
the choice for professional carvers.
Two year warranty.
2003 Nibsburner Best of Show
$205.00
Blue Ribbon Woodburner Kit. Our best selling
Nibsburner! All the power you need for most burning projects.
This burner features a powerful 115 watt woodburner with two
handpiece controlled by a single heat selector. Two removable
tip handpieces with tips 1D & 2C, two cords and two handpiece holders. All backed with a two year warranty. Everything
you need to get started woodburning today!
2002 Blue Ribbon Woodburner
$175.00
Nibsburner
WOODBURNING
Nibsburner Tips $8.00
Red Hot Woodburner Kit Great for hobbyist
and beginning carvers. Includes a powerful 65
watt woodburner. One removable tip handpiece
with tip 1D, handpiece holder and cord.
Complete woodburning set, with a two year
warranty. Start woodburning today!
2001 Red Hot Woodburner
$135.00
2006 Plug Cord
2005 Nibs Cord replacement
2007 Nibs Handpiece
2010 Handpiece Holder
2013 Heavy Duty Cord
2012 Light Duty Cord
2011 Cord with Lugs
2040 3” Wire for Nibs Tips
32
$14.95
$14.95
$18.95
$2.75
$17.95
$13.95
$14.95
$3.25
#2007 Nibsbuner Handpiece $18.95
NEW!!! Nibsburner Fur & More Tip
The special tip is sharpened and
specially formed to make burning fur,
hair, shading and writing more easy.
FT
$8.00
#2007
Handpiece
$18.95
1-800-292-6788
<Super Pro Woodburning Package
Includes Colwood’s most versatile woodburner,
two replaceable tip handle, 5 replaceable tips
(B,C,D,J,S), one ultra flex 18 gauge cord, one
heavy duty 16 gauge cord, a custom plastic
carrying case, and ez-tip puller. This burner
features enough power for most projects and is
preferred by most carvers. Two year warranty.
3401 Super Pro Package
$214.00
>Detailer Package
includes Colwood’s original woodburner, the
Detailer, one replaceable tip handle, 5
replaceable tips (B,C,D,J,S), a custom
plastic carrying case, ultra flex 18 gauge, eztip tip puller. Two Year Warranty.
3403 Detailer Package
$165.00
Our Colwood
woodburning
packages come
with a custom
plastic carrying
case.
B Large Point 1/4” $7.95
C Writing $7.95
D Small Point 3/16” $7.95
E Spade $7.95
G Small Point 3/16” $7.95
J Shader $7.95
C1 Small Calligraphy $7.95
C2 Calligraphy $7.95
K Small Point 5/32” $7.95
LSS Large Shader $8.95
M Micro 3/32” $7.95
SQ Square 3/32” $7.95
MC Ballpoint Tip $13.95
NP Needle Point $14.95
F Super Point $7.95
MR Rounded Heel $8.95
DA Double Line $14.95
RTB1 1mm Ball $15.95
RTB2 1.6mm Ball $15.95
RTB3 2.3mm Ball $15.95
#3404 Colwood Handle $15.95
A Large Round 1/4” $7.95
#3404 Handle $15.95
S Shader $7.95
3408 Cord with lugs $12.95
6579 Keep handpieces
cooler 3pc $1.00
#3407 Tip
Puller $5.25
1-800-292-6788
33
<Foredom Rotary Carving Kit
•1/6HP reversible motor
•(18,000 RPM)
•42” flex shaft
•Variable speed foot pedal
•44T Tapered design handpiece
•1/4”. 3/32” & 1/8” collets
•Pin & wrench set
•PLUS!! 26 Piece carver’s bit kit
•Large Rotating Bur Holder
•Small Bur Holder
•Fur, Fins & Feathers 3 disc DVD
•Flex Shaft Lube
Kit Value $457
#5240 Foredom Kit Our Price $299.95
2 year manufacturer’s warranty
Motor Hanger
Securely suspend your
motor tool for optimum
operating. This new motor
hanger attaches to bench
tops (up to 2.25” thick) with
clamp. Includes spring
safety clips to secure motor
by slipping over motor bale
and handpiece rest.
Adjustable rod height.
2221 Motor Hanger $39.00
Tanzanite Blue version of Foredom's
most popular handpiece
features a #0 geared 3-jaw
chuck that accepts
any size shank
or drill bit up to
5/32". Includes
Chuck Key. Quickly change bits.
H30 Blue Handpiece $65.00
Does not include Motor Tools
Foredom 28 Slim Design Handpiece
(3/32" and 1/8" collets) Great for detail work!
5228 # 28 Handpiece
$59.00
Foredom Maintenance Products
5248 Inner Shaft
5250 Outer Sheath
5251 Shaft Lube
Wecheer Maintenance Products
52543 Inner Shaft
5254 Outer Sheath
$11.00
$15.00
$4.00
$11.00
$13.00
Wecheer Micro Engraver a powerful variable
speed 3,000 to 23,000 RPM engraver with high
torque, high speed and high precision. Made
specially for your fine detail work. Use up to 1/8”
shank bits. 24813
$60.00
34
Foredom
Chisel Handpiece
It attaches to a
Foredom or other flex
shaft with a standard key
tip shaft. Operates between 1000-8000 RPM.
Set includes H50 & Chisels 550
26514 Chisel Handpiece Set
$80.00
26516 Chisel handpiece Only
$50.00
Chisel Set
High quality polished & pre-sharpened Steel
chisels. Profiles shown above.
550 6pc Chisel Set
$41.00
Flexcut Reciprocating
Gouges
This roughing
gouge set includes
#3 5/8” gouge,
#5 9/16” gouge,
#8 3/8” gouge,
and 70 degree 3/8” v-tool.
RG404
$40.00
1-800-292-6788
10 Piece Diamond Bit
Rotary Rasp Set
These aggressive rotary
rasps will cut easily through
the wood. Five great
shapes will fit the need for
most projects.
1/4” shank
2571
$7.95
These 1/4” shank diamond bits are
perfect for use in your 1/4”
handpieces. Covered in 150 grit
diamond they can withstand heavy
pressure and will quickly get the job
$13.95
done. 2470
Always wear eye protection while using rotary
power tools accessories
V-Stones
The stones will last 4-8
times longer than other
abrasives. Vitrified, self
sharpening, special
aluminum oxide grain with
new super hard porous
bond make V-Stones the
coolest and longest lasting
stones. 3/32” shank, 80
grit. 3601
$15.95
10 Piece High Speed Steel
Cutter Set Contains: Cylinder
1/8”,Cylinder 5/16”Ball 1/8”, Ball 5/
16,”Tapered Radius 1/4”,Oval 1/
4”,Wheel 3/8”,Flame 14”,Inverted
Taper 1/4”,Cone 1/4” (1/8” shank)
92012
20 Piece Diamond Bit Set
1/8” shank
This complete set of
diamond burrs features just
about every profile needed
for most detailing and
carving applications
including ball, cone, taper
and cylinder. 150 grit. That’s
less than .75¢ a bit!
2471 20 Piece Diamond
Bit Set
$14.95
Power Carving Tools &
Technique Magazine
Everything you need to know to
carve with power. 174 tool
buyers guide, woodburning and
texturing, choosing the
bits, bird carving secrets.
Projects include power carve a
10 Pc Rotary Rasp Assortment wooden spoon, power carve a
Contains: Cylinder 5/6” HSS, Flame heart pendant, power carve a
1/4” HSS Cone 1/4” HSS, Ball 3/16” classic house sign and gun
stock carving. Shopping guide
HSS, Cylinder 7/32” HSS, Tree 1/4”
Rotary File, Cylinder 1/4” Rotary File, covers hand held, micro
motors, angle grinders,
Ball 1/4” Rotary Rasp, Tree 5/16”
reciprocating, woodburners,
Rotary Rasp, Cylinder 5/16” Rotary
dust collection, bits and more.
Rasp 93010
$34.00
1126
$9.95
542
10-PIECE CARBIDE BURR
SET Get the high quality
carbide burrs you want, at a
great price! Genuine carbide
burrs are preferred for carving
because they out last
standard steel & “high speed
steel” burrs. Teeth are mid
depth set for quick stock
removal & silky smooth finish.
Overall length: 2”. Max. speed
30,000 rpm. 1/8” shank
8903
$56.95
$32.00
801
Dura Grit
Powerful, long lasting cutting
and shaping tools that finish as
they cut. Unique strong
tungsten carbide coated steel
shapes mounted on strong,
heavy duty mandrels.
You will love these bits!
542 1” diameter
$16.95
801 1 5/16” diameter $16.95
Rotary Chisel
Carbide cutting tool for use in
high speed rotary tools up to
30,000 RPM. This is the most
aggressive and controllable
cutting tool available to
woodcarvers. At 25,000 RPM
it makes 1250 cuts per
second. Depth of cut 3/16”,
width of cut 1/8”, shank
1/8”. Fast & Fun!
102 Rotary Chisel
$32.00
1-800-292-6788
35
Scotch-Brite Radial Bristle Discs
Thin flexible bristles get into hard to reach areas without removing detail or making flat spots. They are superior to
sandpaper, flap wheels or other types of sanders. Remove those
“fuzzies” without harming the detail. Use coarser grits to carve &
texture, while the finer grits will smooth, burnish & polish. Recommended speed for woodcarving 5,000 RPM
4510 3/4” 38 pc kit $59.00 6 discs each of 80 yellow,
220 red, 400 blue, pumice pink , 6 micron tan &
1 micron lime plus 3/32” & 1/8” mandrel
Stack
4519 3/4” 10 pc kit $16.00 3 discs of each 80 yellow,
them
400 blue, 6 micron tan plus 1/8” mandrel
4530 1” 25 pc kit $49.00 6 discs each of 36 brown,
50 green, 80 yellow, & 120 white grit plus 1/8” mandrel
4539 1” 10 pc kit $20.00 3 discs of 36 brown, 80 yellow &
120 white grit plus 1/8” mandrel
Our most popular replacement Radial Bristle kits
45116 3/4” 6 pack 80 grit yellow-no mandrel
$9.50
M1 Mandrel 1/8” shank for use with 3/4” discs
45346 1” 6 pack 80 grit yellow-no mandrel
M2 Mandrel 1/8” shank for use with 1” discs
3/8x1/2, 1/2x1/2, 1/2x3/4, 3/4x1/2, 3/4x3/4
Sanding Drum Kit
1/8” shank kit includes medium
& coarse bands and mandrels.
Great for sanding, polishing,
grinding corners, curves and
irregular shapes. Sizes:
1335 Drum Kit
$9.95
Replacement Sleeves online at
Sanding Drum Kit
Rough shape your carvings easily
with this kit. Incudes quick lock
drums in 1/2”x3”, 1”x3”, 1 1/2”x3”
with a fine and coarse band for
each drum. 1/4” shank.
1334 Sanding Drum Kit $19.95
Replacement sleeves online at
36
Marsh Sanders
used and recommended by
Wanda Marsh. Refill with your
own sandpaper.
Fat Mini Sander 5/8x1/25”
1/8” shank
8204
$10.95
Tapered Sander usable area
.25x1.25”, 1/8” shank
8205
$9.95
Mini Soft Sander 3/8x1.25”
1/8” shank
8206
$9.95
Micro Sander .25x.75”
Use 320 grit sandpaper. 3/32”
shank 8207
$11.95
Super Tiny Drum Sander
Our most requested size, super
small sanders. 1/4”x 1/2” drum.
408 Drum Sander
$2.95
411 Sleeves 9 pcs
(3 each of 50,80,120)
$2.95
$1.95
$12.50
$1.95
Sanding Cones-small
3/16”x5/8”
7403 10 pkg 240 grit
7404 10 pkg 180 grit
7407 Mandrel 3/32”
$5.95
$5.95
$1.95
Sanding Cones-large
3/8”x1”
7405 10 pkg 240 grit
7406 10 pkg 180 grit
M22 Mandrel 3/32”
$5.95
$5.95
$1.95
Split Mandrels are used with
strips of sandpaper that you cut
to length of the slot and secure
with hot glue or a small rubber
band.
3/32” shank
M22 3/32” $1.95
M23 3/32” $1.95
1-800-292-6788
Clean with brass brush
on page 22
Ball
1/4”
1/4”
$15
Ball
3/8”
3/8”
$15
Taper
1/4”
1/2”
$15
8637S
8639S
8119S
Dove
3/8”
1/2”
$15
8118S
8115S
Cylinder
1/4”
1/2”
$15
8114S
8339S
8338S
Bud
1/4”
3/4”
$15
8515S
8514S
8415S
8414S
8719S
8315S
Ball Nose
1/8”
7/8”
$15
8314S
8913S
Flame
3/8”
5/8”
$15
Dia
Length
Taper
1/8”
7/8”
$15
8211
#3478 3/4” TAPER $21.50
#3472 3/4” CYLINDER $21.50
#3471 1/4” HEAD BALLNOSE $18.00
#3477 1/2” TAPER $19.50
#3475 3/4” BALL $22.50
#3474 3/4” FLAME $22.50
As seen in Carving Screech Owls
#3476 1/4” TAPER $18.00
NEW!!! Cushioned Sanders large
1/4” shank sanders will do the job.
Refill with your own sandpaper.
8210 Large 3/4x3”
$14.95
8211 Small 1/2x 2”
$12.95
#3473 1/2”HEAD FLAME $19.50
8718S
8715S
8714S
Ball Nose
1/4”
1/2”
$15
#3470 3/4 “ HEAD BALLNOSE $22.50
8210
Dia
Length
8914S
Saburr Tooth Burs
Carbide coated rotary
tools. Power carving rotary
tools feature long lasting,
razor sharp carbide cutting
teeth arranged into a
unique open pattern to
resist loading while
providing rapid stock
removal and smoother
finishes. 1/8” shank burs.
Recommended operating
speed for burs 4,000 to
20,000 RPM.
Compare at $17.50
Green (coarse)
Yellow (Fine)
1/4” Shank Saburr Burs One of our most requested items. Remove wood quickly and efficiently with the
1/4” shank burs. They are real wood eaters!
1-800-292-6788
37
Fur & Hair Texturing Set Cut
perfect V grooves even in the
most difficult end grain wood!
Create hair, fur & texture
anywhere, with this remarkable
diamond V wheels! The secret
is real diamond grit,
permanently bonded to each
wheel. Popular 1/8" shank fits
most power carvers &
handpiece. Set includes 3
diamond V wheels & three 1/8"
x 2" mandrels. Wheel diam: 3/
4". Widths: 1/8"(25°), 1/4"(45°),
3/8"(55°).
8912
$26.95
Guge
Texturing
Stick
These are
amazing little
texturing sticks
used by World
Champion Bob Guge.
Made out of super hard
ceramic. 3/32” x2”.
Can shape with dressing
stone. No mandrel
needed just chuck into
power tool. Perfect for
texturing.
7408 Blue 800 grit $17.95
7409 Brown 300 grit $17.95
7410 Red 1200 Grit $17.95
Small Round Bur Holder
with clear plastic cover
conveniently stores and
organizes 48 accessories.
Holds up to 48 burs with 24
holes for each size shank.
Holds burs up to 2” long.
Burs not included.
10088
$4.00
Universal Rotating Bur
Holder stores and organizes 126 all size
accessories including
1/16", 3/32", 1/8" and 1/4"
shanks. Holds (69)3/32” or 1/8” burs, (12) 1/4”
burs and (45) 1/16” burs.
Burs not included.
10080
$16.50
Collet Nut Kit 1/8”, 3/
32”, 1/16 & 1/32” with
collet nut for Dremel. Fits
all models except models 1, 2, and
series 1 models 260, 270 280 and
380.Compatible with flexshaft
handpieces 235 & 237.
4485
$8.50
CeramCut Blue Stones
The choice of professional power
carvers. They maintain their
shape and hold their cutting edge
longer. Max speed 45,000 RPM
3/32” shank Set comes with
FREE #10088 Small Bur Holder
2999 Blue Stone Set
$22.50
Dremel Chuck quickly
and easily change bits
without changing collets. Use products below to maintain,
Use on models 275, 285 & 395
4486
$12.95
sharpen and reshape your Ceramcut
stones
Always wear eye protection while using rotary
power tool accessories.
Abrasive
Cleaner
Remove material
from your Saburr
Tooth Burs. 3”x3”
#2998
$8.95
38
Wet Stick
2x1/2x3/4” Use wet
for unloading
diamond stones.
#4005
$2.95
Diamond Hone
Use to dress or reshape abrasive stones.
.75x2” diamond pad on
6” handle. (600 grit)
#10343 $8.50
Dressing Stones
used to clean and dress
stones and abrasives
1.75x1.25x.5” (60 grit)
#10333
$8.50
1-800-292-6788
Diamond Points $3.95 each for fine detailing and texturing.
They feature sharp 80-120 grit natural diamond that is well
balanced for high speed use.120,000 RPM max speed
PD7
2.6
2.6
6.0
9.0
8.0
2.0
4.8
PD3 PD24 PD30
1.0
.8
PD25
1.6
2.1
2.6
diameter
1.4
1.6
2.0
length
PD6
PD26 PD2
PD9
PD10 PD15 PD11 PD20
3.3
2.7
4.3
3.8
2.3
7.0
4.0
8.0
5.8 diameter
2.0 length
R16
C196
C200B
C200A
R3112
R3111
R3110
R3109
R3105
R3104
3/32” Shank Cutters
Removing wood is easy with these
cutters. Width of cutters approx
7mm Your Choice $7.50 each
R17 R18 R21 R19
3/32” Shank Ruby Carvers
Achieve the detail you desire with these
high quality ruby carvers. $10.50 each
71
R3103
R3102
3/32” Knife Edge
Cutter great for
feathers and
more, 7mm.
#C161C - $17.00
R3101
Engraving Cutters High speed
Vanadium steel 3/32” shank burs
for fine detailing on hard and soft
woods. Imported $1.30 each
1960 SET/5
$5.75
C201
P3 P7
C200
R5 R7
2.1
10.5
C198
R2
2.6
7.0
R3108
1.2
5.0
2" CARBIDE NUGGET WHEEL
features super-tough nuggets of wear
and impact resistant Tungsten Carbide,
permanently brazed to the steel rim.
The open grain air-cooled design
virtually eliminates clogging, buildup or
overheating. This wheel will fit ¼”
capacity flex-shaft tools & grinders.
Wheel diameter 2" x 3/8", Hole size:
3/8", includes one coarse grit wheel
and mandrel with 1/4" shank.
Maximum speed 10,000 RPM.
4861 2” Nugget Wheel $29.95
C199
PD27
1.6
R3106
PD12 PD22
82
81
76
77
78
79
91
3/32” Shank Ruby Carvers
Larger sizes for shaping, smoothing and
refining your carving. Your Choice $12.50 each
92
White Aluminum Oxide Stones 3/32” Shank
Extremely fine grit (400) Great for super fine
cutting, creating lines and texturing surfaces.
Your Choice $2.30 each
S284
S216 S217
S218 S219
3/32” Stump Cutters
Removes wood quickly and easy to
control. Width of stump cutters approx
7mm Your Choice $10.50 each
1-800-292-6788
39
Carving Wooden Critters
(Harto-Ernst)
#1713 $7.99
Bunnies, puppies, seal,
panda, otter, chipmunk.
NEW!! Chainsaw
Carving
(MacIntosh) Reprint
#7704 $27.99
Techniques for
chainsaw carving
Complete Beginner’s
Woodcarvers Workbook
Woodcarving Workbook
(Guldan) Reprint
(Guldan) Reprint
#7469 $22.99
#7452 $12.99
SALE $16.99
16 projects; cougar, bears,
SALE $9.99
8 relief projects
bobcat, & bison.
Bears to Carve
(Power)
#7196 $12.95
Robust polar bear
Carving Found Wood
(Hood & Williams)
#1597 $19.95
Animals, woodspirits
wildlife and more
40
Carving Realistic Animals
(Russell)
#6378 $12.95
Techniques for carving
animals using power
tools
Carving Bears &
Bunnies
(Wolfe)
#1006 $9.95
Cute bears & bunnies,
easy for beginners
NEW!! Chainsaw
Carving a Bear (Doeren)
Reprint
#7681 $19.99
Great place to start!
Easy and popular
chainsawn bears
Dragon Patterns
#3231 $22.95
180 pages
for carving , wood
burning and more
Carving the Elk
(Power)
#7530 $12.95
Using a combination of
hand & power tools
Wildlife Carving in
Relief
(Irish)
#4482 $24.95
31 beautiful
patterns
Chainsaw Carving Eagle
(Doeren)
#2534 $16.95
Soaring eagle & more.
Complete step by step
guide
Carving Patterns
(Russell)
#2473 $14.95
100 patterns &
illustrations for birds,
animals & fish.
Autographed!
Carving in Moose
Antlers (Matz)
#1262 $16.95
Patterns, layout,
carving & finishing
Bear the Ultimate
Artists Reference
(Lindstrand)
#3214 $19.95
Over 110 pages of
photos, drawings
1-800-292-6788
Horse Carving
(Wolfe)
#6491 $12.95
Horses & colts from
Tom Wolfe
Carving Miniature
Animals (Barr)
#9366 $14.95
Small, cuddly animal
projects
NEW!!! Carving Deer &
Other Mammals (Hajny)
Reprint
#3820 $19.99
Deer, bear and otters
Preorders accepted
Carving Fantasy Legends
(Cipa) Reprint
#8077 $19.99
Wizard, unicorn, troll,
gargoyle, phoenix,
gryphon
Realistic Dogs
(Kochran)
#2194 $17.95
Puppies, short and
long haired dogs
Carving Natures Rascals
(Wachter)
#9663 $14.95
Carve, burn and paint,
mouse raccoon armadillo
& skunk
Carve Realistic Mules
(Hunt)
#3700 $6.95
The book for carving
mules with harnesses
Carving Dolphins
& Whales (Power)
#6200 $12.95
Complete step by step
instructions
The Breakthrough Fish
Carving Manual
#5127 $29.95
Big 292 pages, over
1600 black & white
photos and diagrams
Making Wooden Fishing
Lures (Rousseau)
#4468 $19.95
Carving and painting
techniques that really
catch fish
Freshwater Fish Carving
(Fliger) #1115 $35.00
Our Price $31.00
Patterns instructions and
more for these species
Sunfish, trout & crappie
Carving Gargoyles,
Grotesques and Other
Creatures of Myth
(Cipa)
#3294 $19.95
Fun mythical creatures
1-800-292-6788
41
NEW!! Carving
Screech Owl
(Moore)
#3605 $19.95
Powercarving step by
step for this beautiful owl
Songbird Carving (Daisey)
#1051
$45.00
Our Price $40.00
Songbird Carving II
(Daisey)
#1052 $45.00
Our favorite! Best
book for serious bird
carvers
Four songbird projects,
an excellent book
Our Price $40.00
Illustrated Owl
(Rogers)
#2852 $29.95
Details for the Snowy
Owl & Screech Owl
Illustrated Owl: Barn,
Barred & Great Horned
(Rogers)
#3131 $29.95
The best reference
guide on the subject
Songbird Patterns
(Veasey)
#1073 $14.95
36 patterns for beautiful
songbirds
Carving & Painting a Black
Carving Songbird
Capped Chickadee
Ornaments with Power
(Muehlmatt)
(Russell)
#2423 $19.95
#3135 $16.99
Step by step
Great for ornaments or
instructions
your first bird carving
Power Carving Manual
(WCI)
#3450 $19.95
16 projects from the
pages of WC Illustrated.
42
Carving Hummingbirds
(Solomon & Hamilton)
#2715 $19.95
Full color guide to carving
& painting
Illustrated Birds of Prey:
Red Tailed Hawk, Kestrel,
Peregrine Falcon (Rogers)
#3310 $34.95
Details to add realism to
your carvings
Carving North American
Hummingbirds
#1333 $19.95
All aspects
Illustrated Bald Eagle
(Rogers)
#2844 $24.95
Proportion, detailed
drawings, color charts
for Bald Eagle
Antique Style Ducks
Decoys
(Matus)
#2984 $19.95
Carving, painting,
aging and antiquing.
The Art of Stylized
Wood Carving
#3174 $19.95
Stylized carving
1-800-292-6788
Chip Carver’s
Workbook
(Moor)
#2577 $14.95
Teach yourself with
7 easy projects
Chip Carving
(Best of WCI)
#3449 $19.95
29 projects including
chess set, ornaments
and more
Chip Carving the
Southwest (Gresham)
#6998 $12.95
Patterns in the Southwest style
Chip Carving
Classics One
(Irish)
#4836 $12.95
Tips, techniques &
variety of patterns
A Guide to Chip Carving
Gourds (Rehm)
#3210 $14.99
How to chip and chisel a
gourd
Chip Carving Design &
Pattern Sourcebook
(Barton)
#5263 $14.95
Over 125 projects
featured
Basic Chip Carving
(Gresham)
#2107 $14.95
Step by step how-to
and reference book
Chip Carving Classic
Two (Irish)
#4844 $12.95
Finishing, borders,
geometric, corners,
accents, hearts
Chip Carving Workshop
(Irish)
#7760 $16.99
Techs, Projects &
Patterns for beginners
Projects for Free Form
Chip Carving
(Moor)
#4828 $12.95
45 new patterns
and borders
Chip Carving Gourds
(Rehm)
#4332 $14.99
Bowls, birdhouses, ornaments
and jewelry
The Complete Guide to
Chip Carving
(Barton)
#4128 $17.95
Beginner’s guide to
learn from the best!
Free Form Patterns for
Chip Carving (Moor)
#4481 $12.95
Birds, floral, animals,
butterflies, dinosaurs and
more.
Stamp N Chip Kit
Inlcudes book, stamps, ink
for stamping chip carving
designs
#4037
$39.00
1-800-292-6788
43
Whittling the Country
Bear (Shipley)
#8084 $14.99
Easy and fun to carve
caricature bears
Whittling the Old Sea
Captain(Shipley)
#8152 $12.99
Easy step by step
carving
Autographed
How to Carve Faces in
Driftwood
(Harold Enlow)
#1138 $9.95
Great ideas from Harold
Carving Figure Caricature
in the Ozark Style
(Harold Enlow)
#1019 $7.95
Great original hillbillies
Carving Faces
(Enlow)
#2251 $19.95
7 different faces to carve
See all Enlow
Booklets on
Page 49
44
Carving Fantasy
Characters (Rhadigan)
#7490 $16.99
SALE $12.99
16 original characters
Carving Fantasy
Creatures (Rhadigan)
#6097 $12.99
SALE $9.99
5 whimsical creatures to
carve & paint
Autographed
How to Carve Hobos
(Harold Enlow)
#1022 $8.50
Wonderful hobos from
Harold Enlow
Autographed
Carving Western Figures
(Harold Enlow)
#2210 $8.50
Cowboys, cowgirls and
more
Caricatures in Motion
(Caricature Carvers of America)
#8731 $19.95
Patterns for 25 unique carvings in motion.
A must for award winning carvings
Whittling Little Folk
(Refsal)
#5182 $16.95
20 delightful characters to carve and
paint
Carving a 1880’s Western Train
(Caricature Carvers of America)
#3381 $16.99
Great ideas for caricatures in
a western theme
Caricature Carvers
Showcase
#3379 $19.95
Showcase of carvings
from Caricature Carvers
of America
Carving Bottlestoppers
(Wolfe)
#3322 $14.95
More fun ideas with these
easy to carve bottlestoppers from Tom Wolfe
1-800-292-6788
Carving Caricature
Bookmarks
(Morgan)
#4083 $16.99
Easy and fun to carve.
Makes great gifts
Carving Trolls & Other
Scandinavian Style
Characters (Refsal)
#9255
$12.95
20 projects in the flat plane
style
The Mad Art of Caricature: A Serious Guide to
Drawing Funny Faces
(Richmond) Autographed
#6709 $24.95
THE book for serious
caricature carvers
Art & Technique of
Scandinavian Style
Woodcarving (Refsal)
#2305 $17.95
Carve Oskar and
Dahla horse
Carving Cowboy Faces
#2 (Bolton)
#1027 $12.95
Great Ideas for your
cowboy heads
Carving Heads,
Hats & Hair
(Bolton)
#1016 $16.95
Over 200 pages
Carving the Little Guys
(Randich) Reprint
#7749 $9.99
Little guys out of little
pieces of wood
Woodcarving
Country Folk
(Shipley)
#2860 $14.99
Carve these fun hillbillies
NEW!! Carving
Caricature Nametags
(Morgan)
#1878 $16.99
Step by step instruction
with over 35 patterns
Caricature Carving
(Stetson)
#3121 $19.95
Step by step instructions
with additional patterns
29 Cowboys Patterns
(Streetman)
#3187 $12.95
Great old
west cowboys
Carving Small
Characters (Price)
#1028 $12.95
Caricatures out of 1x1x2”
pieces of basswood
NEW!!! Creating
Caricature Heads
(Kaisersatt)
#2495 $24.95
138 pages of designing & carving step by
step faces
Carving Critters
Cowboys & Other
Characters (Batte)
#1014 $9.95
Seven wonderful
carvings
25 Gunfighter Patterns
(Streetman)
#7838 $12.95
Western gunfighter
caricature patterns
Carving Characters
(Maxwell)
#1704 $6.95
12 caricature patterns
1-800-292-6788
45
Carving the Civil War
(Wolfe)
#1038 $12.95
Patterns & instructions
for Civil War Figures
Basic Penknife Carving
(Wolfe)
#2109 $12.95
Use your carving knife
to carve wonderful
carvings
Caricature Carving
(Best of WCI)
#4741 $19.95
30 all-time favorite
projects
Carving Caricature
Heads & Faces
(LeClair)
#7846 $12.95
33 caricatures with step
by step instructions
Carving Caricature
Figures from Scratch
(LeClair)
#3123 $14.95
Easy & fun to carve
Carving Caricature
Busts
(LeClair)
#1477 $14.95
Wonderful new ideas
from Pete LeClair
Carving MacGolfers
(Humphreys)
#4887 $15.95
Terrific ideas from this
CCA Carver
The Golfers
(Wolfe)
#1034 $12.95
Carve your favorite
golfer with personality
The Little Book of
Carving Golf Balls
(Hummel)
#4067 $9.95
Golf ball carving
Cowboy Carving
(Taylor)
#6416 $12.95
Patterns for four
cowboys and a
horse
What Not Another
Carving Book
(Kotz)
#1151 $4.95
How to carve
caricatures
Carving Golf Ball Spirits
(Wolfe)
#1480 $14.99
Step by step through
carving a golf ball
I’d like to thank you for the very prompt
service and shipping of my order. It was
placed on Sunday, completed by you and
shipped on Monday and received here in
Connecticut on Wednesday. And the tools
ordered required sharpening by you. If at
any time you need a reference from a
delighted customer, please let me know.
Carving the Fisherman
(Taylor)
#9032 $12.95
Four great fisherman
patterns
46
Autographed!
Carving Compact
Caricatures (Johnson)
#7161 $12.95
Great ideas using
basswood eggs
Howard S.
email
1-800-292-6788
Flat Plane Carving the
Nativity
(Diel)
#2439 $12.95
Easy & fun nativity carving!
Carving the Nativity
(Gibson)
#1321 $12.95
Start your heirloom
nativity today
Woodcarving Noah’s Ark
(Cipa)
#4772 $22.95
Noah, wife, ark and 14
pairs of animals
Carving Santas for
Today with Tom Wolfe
#3087 $14.95
New techniques and
hints from Tom Wolfe
Carving Folk Art Figures
(Cipa)
#3171 $14.95
15 projects, Carve your
own folk art figures
Hand Carved Gifts
(WCI)
#3043 $9.95
29 projects, ornaments,
santas, snowmen gifts and
more.
Woodcarving the Nativity
in the Folk Art Style
(Cipa)
#2022 $14.95
Wonderful project
Extreme Pumpkin
(Hood & Williams)
Reprint
#8060 $14.99
Ideas for pumpkins
& wood
Ron Ransoms Favorite
Santas for Carvers
#3628 $14.95
Nine favorite Old World
style santas
Handcarved Christmas
(Best of WCI)
#6059 $19.95
36 projects from ornaments to decorations
Handcarved Holiday
Gifts (WCI)
#3048 $9.95
Santas, ornaments,
decorations just in time
for the holidays!
Autographed!
Traditional Christmas
Ornaments (Griffin)
#2082 $6.95
Sale $4.95
1-800-292-6788
47
Whittling Pencils
(True)
#3751 $9.99
Projects &
Techniques
NEW!! FAT Wooden Red Pencils
Perfect for carving 3/8x 7 5/8”
375210- 10 Pack $7.50
3752 Each
.85¢
Carving Angels
(Stadelman)
#8605 $12.95
Beautiful detailed
designs
St Francis of Assisi
(Gibson)
#2617 $12.95
Realistic carving of St
Francis
Carving Wooden
Santas
(Oar)
#3836 $16.95
Santas, elves,
reindeer and more
Autographed!
Carving Santa Claus Ornaments
(Johnson)
#7166 $13.95
8 different countries with costumes
48
An Heirloom Santa
(Bolinger)
#3194 $12.95
Carving & painting for large
detailed santas
Making Collectible
Santas & Christmas Ornaments in Wood (Maxwell)
#1705 $6.95
Easy ornaments
Eyescrews
2360G Brass Color $8.50
2360S Silver Color $8.50
SAVE!!! 2+
$8.00e
Hand Carving
Snowmen & Santas
(Shipley)
#1295 $14.95
Easy & fun santas & snowmen
Snowmen are Cool
(Bolinger)
#9765 $14.95
Easy & fun to carve,
makes great gifts
Learn to Carve
Santas
(Enlow)
#2239B $5.99
29 page booklet
See all Enlow
booklets on page 49
1-800-292-6788
Learn to Carve a
Cowboy
(Enlow)
#2238B $5.99
29 page booklet
Learn to Carve a
Witch
(Enlow)
#2237B $5.99
29 page booklet
Learn to Carve
Santas
(Enlow)
#2239B $5.99
29 page booklet
Learn to Carve
Eyes & Lips
(Enlow)
#2241B $5.99
29 page booklet
Learn to Carve
Noses & Hair
(Enlow)
#2240B $5.99
29 page booklet
Carving Faces
(McCurdy)
#3364 $14.95
A step by step system
for faces
Learn to Carve
Basic Ear
(Enlow)
#2250B $5.99
29 Page Booklet
Carving the Human Face
(Phares)
#56522 $24.95
Techniques for carving hair,
facial features, realistic skin
and muscle.
Drawing the Head &
Figure
(Hamm)
#2624 $12.95
Carvers handbook, a
must for figure carving
Dynamic Wrinkles &
Drapery (Hogarth)
#5874 $23.95
A must for correct fabric
flow on any carving
Learn to Carve a
Female Face
(Enlow)
#2236B $5.99
29 page booklet
Carving the Head in the
Classic European Tradition
(Gielser-Moroder)
#3026 $14.95
Learn the secrets of master
carvers
Learn to Carve Ugly
Faces
(Enlow)
#2235B $5.99
29 page booklet
Learn to Carve
Native American
Chief (Enlow)
#2244B $5.99
29 page booklet
Learn to Carve a
Woodspirit
(Enlow)
#2242B $5.99
29 page booklet
Carving the Native
American Face
(Kramer)
#7153 $12.95
for Indian faces
1-800-292-6788
49
NEW!! Carving the
Native American
(Burke) Reprint
#7872 $19.99
Start to finish Indian
bust
NEW!!! Carving
Woodspirits (Hendrix &
Perry) #7002 $17.95
Autographed
Beyond the basics, step
by step instructions
Woodspirits
& Walking Sticks
(Wolfe)
#2453 $12.95
for faces in wood & sticks
Carving Traditional
Woodspirits
(Wolfe)
#1700 $12.95
Carved in the Bavarian
style
Wood Spirits
& Green Men
( Irish, Pye & Cipa)
#3261 $19.95
40 ready to use
patterns
Bark Carving
(Jansen)
#6509 $14.95
Lighthouse, santas,
gnomes, pumpkins & more
Relief Carving
Wood Spirits
(Irish)
#8022 $19.99
Covers eyes, noses, other
facial features in relief
50
Carving Tree Bark
(Jensen)
#2186 Book $14.95
Woodspirits, animals,
santas, houses & more
Sculpting the Female
Face & Figure in Wood
(Norbury) Reprint
#7421 $24.99
Learn figure carving from
the best
NEW!!!! Anatomy
#3716 $27.95
How to draw and paint
anatomy with CD. Take
your work to the next
level
Power Carving House
Autographed
Spirits
How to Carve Faces in
(Wolfe)
Driftwood (Enlow)
#1837 $12.95
#1138 $9.95
Add some house spirits Ten great patterns for
to your home
easily found driftwood
Cottonwood Bark
Carving II
(Jansen)
#6510 $14.95
Relief carving, santas,
spirit faces & more
Carving a Closet Buddy
(Hummel)
#3221 $12.95
Faces in aromatic
cedar for your closet
How to Carve a
Woodfellow
(McDaniel)
#3150 $11.95
Powercarving a wood
fellow in a wood knot
Carving a Hatman
(Hummel)
#3222 $14.95
Wonderful,
easy to carve
funny hat men.
1-800-292-6788
Autographed!
How to Carve a Woodspirit
in a Hiking Stick (Johnson)
#7162 $9.95
Our most popular book on
the subject
Carving Wildfowl
Canes & Walking
Sticks with Power
(Russell)
#5897 $14.95
15 Patterns
86 Cane Patterns
(Wolfe)
#3724 $14.95
From fish to dragons
great patterns
Tom Wolfe Carves
Spirit Canes
#3054 $14.95
Carving, painting &
finishing techniques
Woodspirit Study
Casting (Johnson)
#7164 $10.95
Casting from the book
shown at left. Great
help for beginners
Carving Canes
& Walking Sticks
(Wolfe)
#2618 $12.95
For all carvers
novice to pros
Stickmaking a
Complete Course
(Jones/George)
#3683 $22.95
Walking sticks, crooks
and market sticks
Carving Wooden Finger
Puppets & Cane Toppers
(Oar)
#3389 $14.95
Easy projects from
basswood eggs
Carving Animal Canes &
Walking Sticks with Power
(Russell)
#3281 $14.95
15 projects
Colorado Aspen
#7165 $9.95
Start carving right away with
3 pieces of aspen.
Length 8”
Sculpting Cane
Handles
(Scariano)
#8237 $14.95
Make handles that fit
the hand and designs
The Fantastic Book of
Canes Pipes and Walking
Sticks (Ameredes)
#3002 $14.95
Loaded with patterns,
patterns, patterns
1-800-292-6788
51
Relief Carving
Workshop (Irish)
#7360 $19.99
Techs, patterns &
projects for the
beginner
Relief Carving Made
Simple
(Whillock)
#2088 $9.95
Great projects for beginners
Relief Carving
(Hall)
#9387 $24.95
The fundamentals with
Master Carver Nora
Autographed!
Carving in Moose
Antlers (Matz)
#1262 $16.95
Patterns, layout,
carving & finishing
52
NEW!!! Carving
Realistic Flowers
(Marsh)
#8183 $14.99
Revised edition of this
best seller
Floral Woodcarving
(Sutter)
#1168 $6.95
21 beautiful floral
designs
Modern Tribal Tattoos
#3980 $14.95
Fantastic designs for
woodburning and more
Wildlife Carving in
Relief
(Irish)
#4482 $24.95
31 beautiful patterns
Carving the Rose
(Hagensick)
#1231 $13.95
Step by step power
carving and painting
flowers
Lettering & Sign Carving
Basic Relief Carving
(Keilhofer)
Workbook
#7854 $12.95
(Padden)
#4529 $19.95
Great book for
10 projects for carving, painting
beginning relief
carvers
custom signs
Tattoo Designs
101 Artistic Relief Patterns
#8138 $16.99
for Woodcarvers
500 designs for
Woodburners & Crafters
woodburning & carving. A (Irish) #3997 $19.95
favorite for pyrographers!! Carve, woodburn & paint
Autographed!
The Spirit of Carving
Clocks (Zelt)
#9283 $20.00
18 patterns, ideas &
techniques for carving
heirloom quality clocks
Relief Carving Projects &
Techniques
(Best of WCI)
#5588 $19.95
Expert advice and 37 alltime favorite projects
1-800-292-6788
Autographed!
How to Sharpen
Woodcarving Tools
(Johnson)
#7163 $9.95
THE book for
sharpening instruction
Beginning Woodcarving
#2801 $24.95
Tips, techniques,
practical advice for
beginning and
improving carvers
Sharpening Tools &
Setting Up Shop
(Best of WCI)
#4758 $19.95
Expert Tips &
Techniques
Complete Book of
Woodcarving
(Ellenwood)
#2921
$27.95
Classic carving styles
including power carving
First Projects for
Woodcarvers (Green)
#9598 $12.95
Our favorite book for
beginning carvers
Celtic Carved Lovespoons
(Littley& Griffin)
#2097 $17.95
30 patterns to
inspire you
Power Carving Tools
& Technique
Magazine
#1126 $9.95
Buyers guide, projects
and more
Woodcarving Basics
(Sabol)
#8886 Book $19.95
Great for beginning and
novice carvers
Woodcarving Course &
Reference Manual
(Pye)
#4567 $19.95
A beginners guide to
traditional techniques
Basswood Carving Blanks
covered in First Projects for Woodcarvers
9600 Boot Blank
$3.95
9599 Dog Blank
$3.95
9601 3Pc Nativity
$7.95
Carving Boots & Shoes
(Green)
#1191 $12.95
Easy ideas for
beginners
Carving Traditional Style
Kachina Dolls
(Moore)
#3124 $14.95
How to carve kachinas
1-800-292-6788
53
Whittling Pencils
(True)
#3751 $9.99
Projects &
Techniques
Carving Magazine
Issue will be the latest
edition of this popular
magazine
#7450 $6.99
Acanthus Carving
(Yorburg)
#5068 $24.99
Covers all aspects of
traditional acanthus
Whittling
Magazine Vol 1
#3047 $9.95
Great projects
for whittling!
Gunstock Carving
(Janney)
#3166 $19.95
Step by step projects , tips,
techniques and patterns
Carving Gunstocks Power
Techniques
(Valencia)
#3370 $16.99
Scrolls, basket weave,
wildlife and more
Whittling & WoodcarvKids Craft Woodcarving
ing (Tangerman)
(Ellenwood) Reprint
#1173 $12.95
#8008 $14.99
Projects for whittling Safety, how to and care for
and wood carving your tools. 7 cool projects for
lots of fun!
54
Woodcarving Illustrated
Magazine
Issue will be latest edition
of this popular magazine
#8500 $7.99
Whittling
Magazine Vol 2
#3042 $9.99
30 easy whittling
projects
NEW!!! 135 Gunstock
Patterns (Irish)
#7957 $16.99
Animals, basket-weave,
scrolls, leaves, fish
scale, more
Carving in Soap (Suzuki)
#2928 $14.95
Carving for kids using
soap.
Soap Carving
(Suzuki)
#8599 $12.95
For children of all ages
1-800-292-6788
Whittle Fun
Whittling Twig & Branches
(Lubkemann)
(Lubekman)
#3520 $12.95
#1491 $12.95
Fun games and
Use a pocketknife to carve
projects for whittling.
these clever carvings
Art of Whittling
(Faurot)
#6254 $9.95
Since 1930 it has been
fascinating woodcarvers
Carving Wooden Finger
Puppets & Cane Toppers
(Oar)
#3389 $14.95
Easy projects from
basswood eggs
Autographed!
Wooden Egg Art (Griffin)
#1142 $6.95
Sale $4.95
Woodburning on half
and whole eggs
Little Book of Whittling
(Lubkemann)
#2747 $12.95
Backpack size book, carve
a slingshot, whistle
Whittling for Beginners
(Salty)
#4521 $10.00
Basics of chain & chip
carving
Egg Heads & Other
Eggcellent Things
(Wolfe)
#3037 $14.95
Caricature heads and
more
Autographed!
Carving Compact
Caricatures (Johnson)
#7161 $12.95
Great ideas using
basswood eggs
Whittlin Whistles
(Wiebe)
#5049 $12.95
Make music with your
pocket knife
Woodcarving Magic
(Jespersen)
#5236 $19.95
25 amazing designs that
will keep you challenged
NEW!!! Old Time
Whittling
(Randich) Reprint
#7742 $9.99
Fun & easy to carve
Carving Egg Heads
(Finn)
#9938 $12.95
Eyes, nose
and mouths
Carving Egg Animals
(Finn)
#4157 $14.95
Rabbit, bear, pig,
dragon
Basswood Eggs
5507 Goose Egg
550812 Goose Eggs Dozen
1740 Hen Egg
174012 Hen Eggs Dozen
1125 Egg Stand (oak)
112512 Dozen Eggs Stands
1-800-292-6788
$3.00
$30.00
$1.50
$15.00
.75¢
$8.00
55
NEW!!! Pyrography
Woodburning with
Woodburning with Cheryl
Woodburning with
Basics
Cheryl Dow Book #1
Dow Book #2
Cheryl Dow Book #3
(Irish)
#3331 $12.95
#3330 $12.95
#3329 $12.95
#5052 $9.99
Raccoon, wolf, squirrel, owl, Loon, mouse, coon, lynx, Calligraphy, eyes, fur and
Techniques and excerises
barn, lighthouse, moose,
chippie, froggie, barn, twelve patterns including
for beginners
fawn
heron, deer and wolf.
flowers, birds, animals.
Woodburning with
Cheryl Dow Book #4
#3328 $12.95
35 4x4” patterns for
woodburning quilt square
patterns.
Pyrography Workbook
(Walters)
#2585 $19.95
Projects for students as
well as pros techniques
for burning.
Burning & Texturing
Methods (veasey)
#1067 $9.95
Woodburning techniques
for waterfowl
56
Woodburning with Cheryl
Dow Book #5
#3327 $19.95
19 full color patterns that can
be enhanced with oil pencils.
Includes 22 more patterns.
Celtic Patterns
#3140 $22.95
200 pages
for carving wood burning
and more
Gourd Pyrography
(Widess)
#3333 $14.95
Burn delicate lines, spirals,
curves on intricate designs
Learning the Art of
Woodburning with Style
Pyrography
(Easton)
(Chapman)
#4437 $24.95
#7293 $12.95
Pyrography lessons and
Lines, curves, circles, projects with a modern
stippling, feathers, hair,
flair
fur and more
Pyrography Designs
(Gregory)
#1162 $17.95
Hundreds of great
designs for woodburning
Gourd Art
(Dellos)
#6141 $16.99
Patterns, burning and
coloring with ink dyes
101 Artistic Relief Patterns
for Woodcarvers
Woodburners & Crafters
(Irish) #3997 $19.95
Carve, woodburn & paint
Woodburning Projects &
Pattern Treasury
(Pompano)
#4826 $24.99
Mix and match
patterns and borders
1-800-292-6788
Pyrography
Magazine Vol 1
#3046 $9.95
64 Step by step projects
photos, buyers guide and
more
Art & Craft
of Pyrography (Irish)
#4789 $19.95
Create beautiful artwork
on a variety of surfaces
NEW!!! Pyrography
Magazine Vol 3
#3039 $9.99
29 wood burning
projects
Pyrography
Magazine Vol 2
#3044 $9.95
Patterns, guides,
& techniques
NEW!! Pyrography
Patterns
(Walters) Reprint
#8190 $16.99
Reissue of Wildlfie
Designs-best seller!
Basic Wood Burning
Wood Burning Rural
Great Book of Woodburning
(Waters)
Scenes (Waters)
(Irish)
#2879 $22.95
#5681 $12.95
#5690 $12.95
Projects include
Learn how to burn glass,
Pyrography techniques,
patterns & projects for all
lettering, floral,
leaves, grass, wood,
mountain, lakes, elk and
stone, meadows and
skill levels
more.
mountains
Step by Step Pyrography
Projects (Neill)
#4919 $12.95
30 projects transfer
patterns, burning and
adding color
Pyrography 101
(Denison)
#5027 $19.95
For beginning & advanced
burners wishing to improve
their skills.
Woodburning Basics
(Armstrong)
#6752 $14.95
Get great results from
the inexpensive
woodburners
Learn to Burn
(Easton)
#7285 $16.99
Step by step guide to
getting started in
Pyrography
Pyrography Patterns
(Denison)
#5018 $14.95
14 original wood
burning patterns
Lifelike Pyrography from
Photographs (Denison)
#5026 $19.95
Advanced techniques to
create original work from
photographs.
Complete Pyrography
(Poole)
#9769 $21.95
12 step by step
projects.
The Art of Pyrography
(Denison)
#5025 $19.95
The newest ideas for
woodburning
1-800-292-6788
57
NEW!!!
NEW!!! Woodburning with
Woodburning with
Sharon #1
Sharon #2
#3561 $22.00
(Bechtold) Autographed
10 of Sharon best selling
#3562 $22.00
animal patterns
17 new patterns
NEW!!! Gnome
Homes (Bechtold)
Autographed
#3565 $18.00
Whimsical patterns for
fairy houses and
gnome homes. Fun!
NEW!!! Burning
Backyard Birds
#3566 $22.00
Over 12 patterns
Preorder NOW!
Beginning Woodcarving
DVD (Ellenwood)
#8401 DVD $24.95
Easy to learn the art of
woodcarving from this
DVD
Relief Carving in a
Different Light
DVD #2151 $15.95
Step by step relief
carving
NEW!!! Birds of Prey
#3563 $18.00
10 patterns
eagles, hawks,
falcons, owls
NEW!!! Spirit of North
America (Bechtold) Autographed
#3564 $22.00
13 patterns including eagles,
bighorn sheep, wolves, deer,
bear and more
NEW!!! DVD
Woodburning a Sparrow
(Bechtold)
#3560 $18.00
Step by step tutorial
sparrow on a wood surface
Sharpening
Simplified
(Ellenwood)
#4009 DVD $24.95
A simple method
for sharpening
Carving a Figure-The Female Form
(Gonzalez)
#4130 DVD $24.95
Using detailed step by step instructions, hand and power tools
NEW!!! DVD Burning
Santa & Mrs Claus
(Bechtold)
#3567 $20.00
Preorder NOW
Chip Carving with
Wayne Barton DVD
#2147 $19.95
Learn chip carving as
you follow along with
this DVD
Fur, Fins & Feathers
(Power) #1131 $31.00
Three DVD set covers
carving cottontail, mallard
and bass all with power
tools
1-800-292-6788
58
Carving Walking Sticks
(Gargac)
#9224 DVD $25.00
Carve a fun Mountain man
face in your stick
Carving Woodspirits
(Gargac)
#9222 DVD $27.00
Release woodspirits
from the wood using this
DVD
NEW!!!
Woodcarving an Eagle Head
with Jim Redhawk DVD
#8044 $24.00
Easy and fun carving
America’s symbol
Woodcarving a Bark
House (RedHawk)
DVD #8007 $24.00
Carve a fun and Whimsical house from bark
Carving Santa Ornaments
(Gargac)
#9220 DVD $27.00
Carve wonderful santa ornaments,
learn finishing techniques
Carving Cowboy
Bottlestopper
(Gargac)
#9223 DVD $27.00
Fun & easy project
Carving a Basic Face in
Cottonwood Bark DVD
#8003 $29.00
Follow Redhawk as he carves
a basic face in bark
Carving Eyes
with Redhawk DVD
#7996 $45.00
Learn the secrets of
carving eyes
Double DVD Set
Carving a Mountain Man
with Jim Redhawk
DVD
#7997 $24.00
Great project with Jim
Redhawk
Carving Feathers
with Jim Redhawk
DVD #8040 $24.00
Carve feather with Jim
Redhawk
Carving Elf Ornaments
(Gargac)
#9221 DVD $27.00
Roughing out, proportion,
facial features and natural
finishes
Carving an American
Indian Woman with Jim
Redhawk DVD
#7998 $45.00
Two DVD set
1-800-292-6788
59
Pyrography Nibs & Their
Uses (Walters)
DVD #4413 $12.95
Burning tip variety and
their uses, what tip to
use where for professional results
DVD Carving
Female Torso
(Norbury)
#7551 $19.99
DVD Carving a
Male Torso
(Norbury)
#7605 $19.99
DVD Carving Venus
the Goddess of
Love Double
(Norbury)
#7582 $29.99
60
DVD Pyrography
Workshop (Walters)
#3411 DVD $24.95
85 minutes, bird portrait
in high realism, step by
step
Carve a Tall Skinny
Santa DVD
(Moore)
#7270 $19.00
Fun and easy
DVD Carving the
Horse Head
(Norbury)
#7575 $19.99
DVD Carving a
Female Head
(Norbury)
#7568 $19.99
DVD Woodburning with
Cheryl Dow
(2 DVD’s)
#3332
$49.95
Four hours of private
instruction via these
DVD’s.
Paint a Tall Skinny
Santa DVD (Moore)
#7271 $19.00
Complete your santa with
this guide to painting
DVD Carving the
Female Figure Vol
1
(Norbury)
#7537 $19.99
DVD Carving a
Portrait in Relief
(Norbury)
#7599 $19.99
Carving Woodspirits in
Cottonwood Bark
(Johnson)
DVD #9504 $24.95
90 minutes, complete
step by step instructions
Figure Carving in
the Scandinavian
Style (Refsal)
DVD #3021 $24.95
Flat plane carving at
it’s best!
DVD Carving the
Female Figure Vol 2
(Norbury)
#7543 $19.99
DVD Carving
Uncle Sam
(Norbury)
#7612 $19.99
1-800-292-6788
Basswood Eggs
5507 Goose Egg 3/25”
550812 Goose Eggs Dozen
1740 Hen Egg 2.5”
174012 Hen Eggs Dozen
1125 Egg Stand (oak)
112512 Eggs Stands Dozen
$3.00
$30.00
$1.50
$15.00
.75¢
$8.00
Aspen
3 pieces of aspen
carve your own
woodspirits. Great
practice pieces or
perfect size for wall
hanging sized
woodspirits. 8”long.
7165 $9.95
Northern Basswood
If you want great results then you must start with
great wood. Basswood has been used for many
years by woodcarvers. It is known for it’s fine,
even grain and exceptional stability. We stock all
the popular sizes.
Wood orders may incur additional shipping charges.
2765 1x1x12
2745 1.5x1.5x12
2751 2x2x12
2752 2x3x12
2753 2x4x12
2755 2x6x12
2758 3x3x12
2759 4x4x12
2766 1x8x12
2763 4x6x12
4406 .25x4x12
Other sizes available by special order
$1.50
$2.00
$3.50
$5.50
$7.00
$10.00
$8.00
$14.00
$7.00
$20.00
$3.00
Learn to carve with these step by step study casts
from author and instructor Skylar Johnson. Made
of resin from an original woodcarving. These
originated as study pieces for students to see and
study the techniques from a copy of the subject.
Great for beginners and advanced carvers.
Choose from nosestick, eyestick, lipstick,
woodspirit and golf ball.
Each $18.95
SAVE!!!!! Buy 3 or more for $17.00 each
$18.95
#7175 Golf Ball
$18.95
#7168 Eyestick
Study Casts by Skylar Johnson
#9501 Woodspirit $18.95
$18.95
#7169 Lipstick
#7170
Nosestick
$18.95
Precut Golf Balls ready for carving, core
color may vary.
7174 Golf Ball (1)
$2.95
71743 Set 3 (3)
$8.00
717415 Box of 15
$30.00
Woodspirit
Study Casting
made from the
original carving in the
book How to Carve
Woodspirit in a Hiking
Stick , by Skylar
Johnson, this casting
will help you see and
feel the cuts to make
a great woodspirit.
#7164
1-800-292-6788
$10.95
61
NEW!!!!
CARBIDE NUGGET
WHEEL This wheel will
remove wood faster, leave
the surface smoother, and resist clogging
better, than others we’ve tried! They feature
super-tough nuggets of wear and impact
resistant Tungsten Carbide, permanently
brazed to steel rims. Unlike other wheels, the
open grain design virtually eliminates clogging
or buildup. These wheels will fit most all 4.5" or
larger angle grinders. Wheel diameter 4.5"
(115mm), Hole size: 7/8" (5/8" & 1/2" adaptors
included). Use only with guard, 15,000 rpm
maximum. 8910
$42.50
Arbortech Carvers and Cutters online at
GREAT PRICES
MICRO-PRO CHAMPION SET Create
pro quality detail! Higher carving speeds
give superior carving results, smoother
texturing, plus improved detailing,
stoning & feathering. The new Micro-Pro
Champion features an 11% increase in
torque (power). With higher torque &
speed up to 46,000 rpm, the Micro-Pro
has the power, speed, superior features
& quality you want, priced far less than
others! For better control, power flows to
the handpiece by a 6’ flexible cord. The
dial varies speed from 0 to 46,000 rpm!
Control box features: dial speed control
knob, lighted power indicator, on / off
switch, overload protection, 6-burr
storage holes, 110/220 Volt selector,
forward / reverse switch (directs chips away from you & reduces grain effects). Handpiece
features high torque, fan cooled micro motor, sealed NSK ball bearings, solid grip turn-ring for
hands-free bit changes (1/4 turn releases or locks bits & collets). Handpiece specifications
46,000 rpm: L. 6", diameter 5/8"-1", weight 6.9 oz. Set includes: handpiece, 3/32" & 1/8" quick
change collets, variable speed power supply, table top and box mounted handpiece holders,
long-life motor brushes, instructions & 1-year warranty. Burrs not included .
3800 Micro Pro Champion Set
$199.95
Are you a Pyrographer?
Woodcarvers Catalog
Request our
Woodburner’s
Catalog. It’s
filled with the best
woodburners, books,
DVDs, tips, connectors,
magazines, pyropaper
for carvers, gourd artists
and pyrographers.
Need you own catalog,
one for a friend, a few for
your club members? Just
give us a call and we will
send catalogs right out!
Our woodcarver’s catalog
is filled with everything for
the woodcarver.
Call us at 1-800-514-0358
Call us at 1-800-292-6788
62
1-800-292-6788
Ordering Information
Business Hours 9-5 (mountain) Monday
thru Friday. We’re closed on Saturdays,
Sundays and major holidays. We don’t
have a retail showroom, but we do
participate in woodcarving shows around
the country, please check our website to
see our schedule.
Ordering By Mail For faster service use
the enclosed order form. If order form is
missing use a sheet of paper and mail to :
Mountain Woodcarvers, P.O.Box 3485,
Estes Park, CO 80517
Internet Orders Easy and secure ordering
online www.mountainwoodcarvers.com.
See the newest items as they become
available online.
Alaska, Hawaii, Puerto Rico, Canada
and International Orders Shipped
AIRMAIL and billed actual shipping $10.50
minimum. Please view our website for
more information about international
orders.
We ship FAST! Most orders are processed and on their way to you within 24
hours. In stock items should be delivered
anywhere in the US within 7-10 working
days, excluding holidays. Most orders are
sent via USPS Mail. Larger orders and
boxes will be sent via UPS.
Express Service We offer UPS 3 day
shipping, UPS 2nd Day shipping and
UPS Next Day shipping. We bill actual
shipping. Phone orders only 1-800-2926788
Backorders We make every attempt to
maintain inventory for our customers. In
the event an item is on backorder, it will be
shipped when available at no additional
shipping cost.
Our Guarantee We offer only the finest
tools and supplies. Everything you buy is
backed by our 30 day no hassle Guarantee. If you are not completely satisfied with
your purchase, we’ll gladly exchange it or
give you credit within 30 days of purchase.
Colorado Residents add 2.9% sales tax
Subscribe to our Email DealFlyer for
exclusive sales, new items and more. Your
email address is used to send order
confirmation, shipping information and to
notify you of our email exclusive special
sales and offers. We do not sale or rent
our email list.
Woodcarving Shows We participate in a
number of woodcarving shows throughout
the US. Check out our show list online at
www.mountainwoodcarvers.com.
Privacy We do not share any of your
information with anyone.
Mountain Woodcarvers Inc
P.O.Box 3485
Estes Park CO 80517
www.woodburnerscatalog.com
Issue 34
Name_________________________________________
Billing Address_________________________________
City_____________________State______Zip________
Shipping Address_______________________________
City_____________________State______Zip_________
Credit Card #__________________________________
Expiration Date__________________CVS#__________
Email_____________________Phone______________
Item#
Description
Qty Price
Total
FREE Carvers Catalog
FREE Woodburners Catalog
Shipping Charges
Proudly Printed in USA
Recyclable
Call to Order
1-800-292-6788
Fax 970-586-5500
Subtotal
Colorado Residents
Orders up to $15..........$5.00
add 2.9% sales tax
$15.01 to $50.00..........$8.50
Over $50.00................$10.50 Shipping Charges
see chart at left
AK, HI, PR..................$10.50
Basswood...................Actual
Total
International Actual AIRMAIL
($10.50 minimum)
Copyright 2014 Mountain Woodcarvers
Not responsible for errors or omissions
2014/3987018
1-800-292-6788
63
Sculpture House® Relief Set
This set includes five necessary
tools for relief carving all in the
short bent style. Here’s what’s
included #1SB 16mm,
#2SB8mm, #4SB12mm,
#8SB8mm and 70°SB8mm.
A $73.00 value. Sharpened for
immediate use.
PROR
$65.00
More Sculpture
House Tools
on pages16-19
PO Box 3485, Estes Park CO 80517
Sculpture House® Roughout Set
Every carver needs a few large
tools to quickly roughout waste
wood. This set includes
#1-30mm chisel, #7-34mm gouge
and a #10-32mm gouge, for
mallet or hand use.
A $81.00 value. Sharpened
ready to use.
PROL
$75.00
Mountain Woodcarvers Inc
Sculpture House® V-Tool Set
Three highly sought after sizes
of v-tools. This set includes 3/4”
60° v-tool, 7/8” 70°v-tool and
1.25” 90° v-tool. Remove wood
quickly and efficently with PRO
set of V-tools. A $93 value
Sharpened ready to use.
PROV
$85.00
Sculpture House® PRO Set
Just the tools need to start carving larger
projects. This PRO set includes; #4 Fishtail 16mm,
#8 fishtail 12mm, #11-6mm, #6-6mm and a 70°8mm v-tool.
Sculpture House Inc, a US corporation, is known
throughout the world as the premier source for
sculptor’s tools. With a history of tradition and
manufacturing integrity, they manufacture and
distribute the world’s most complete line of sculptor’s
products for wood carving used by professionals and
amateurs alike. Here are the specifics on the tools
from Sculpture House USA. They are long handled
tools ranging from 9” to 11” in overall length, suitable
for hand and/or mallet carving. They are all fitted with
a hardwood handle. The steel (grade 1095C) is high
carbon steel, tempered or heat treated to harden the
steel so it maintains a sharp edge, will range approx.
59 to 62 on the Rockwell Black Diamond hardness
testing device. The benefits are clear, an American
made tool, hand forged with high carbon tool steel,
made to last and maintains a sharp cutting edge at
manufacturer’s closeout prices. We sharpened this
set for immediate use. $80 Value
PRO1 Basic Carver’s Set
$65.00
1-800-292-6788

Woodcarvers start - Mountain Woodcarvers

Transcription

Similar documents

Riva Crabhouse - Chicago Jewelers` Association

adam paul heller - Society of Printers

September 2016 Newsletter - Regina Whittlers and Woodcarvers

20 | 21 - FreelinMX

Whittling a Three

packard center meeting - Northern Virginia Carvers

3, 2 and 1 Day Seminars - Affiliated Wood Carvers

CAPITOL CARVERS January 2014

Untitled - Ron Baileys Carvings

Wedding Complete Packages