manual - Wishbone Design

manual
gebrauchsanweisung | manual | instructions de | manuale | handleiding
www.wishbonebike.com
3-bikes-in-1
ENGLISH
Deutsch
Español
Français
Italiano
Nederlands
1
2
And you’ve scored
yourself a happy Sunday
afternoon, a smiling kid,
and a rider for life. Nice.
ENGLISH
With its sustainable design and
manufacture, and innovative
3-bikes-in-1 feature, the Wishbone
Bike designed in New Zealand
really is the ultimate pre-bike.
TM
contents
assembly:
– components
– assemble the trike
– assemble the bike
– front wheel on
– front wheel off
– assemble the handlebar
4-5
6-7
8-9
10-11
12
13
getting the right fit:
– flip the frame over
– adjust the seat
ECO BIKE
MAINTENANCE
WARNING
OUR WARRANTY
14-15
16
17
17
17
18
certificate of ownership
100
CONTACT USBACK COVER
components
b. a.
c.
g.
f.
l.
k.
d.
e.
h.
i.
j.
m.
Trike rear axle kit:
Bike rear axle kit:
Front wheel kit:
a. threaded rod
b. 2 x washers
c. 2 x long capping nuts
d. long axle tube
e. 3 spacers – 2 x long, 1 x medium
f. threaded rod
g. 2 x washers
h. 2 x capping nuts
i. short axle tube
j. 2 mini spacers
k. threaded rod
l. 2 x capping nuts
m. short axle tube
n. 2 small spacers
o. nylon bush
4
n.
o.
ENGLISH
components
t.
p.
q.
r.
s.
Handlebar kit:
Bike frame, forks and seat
2 x allen keys
safety wheel, tube and tyre
p. handlebar
q. handlebar collar
r. 2 x rubber rings
s. 2 x screws
t. 2 x handgrips
5
assemble the trike
1.
2.
3.
4.
Trike kit components.
Insert axle tube through
frame and middle spacer.
Thread spacers on each end.
Place wheels on each end.
6
ENGLISH
assemble the trike
5.
6.
7.
Insert threaded rod with
washer and capping nut
on one end.
Place washer and capping
nut on other end.
Tighten.
7
assemble the bike – back wheel
1.
2.
3.
4.
Insert axle tube through
rear wheel hub.
Thread mini spacers on
each end.
Place axle and wheel
between frame.
Place axle and wheel
between frame.
8
ENGLISH
assemble the bike – back wheel
5.
6.
7.
8.
Place axle and wheel
between frame.
Insert threaded rod with
washer and capping nut on
one end.
Place washer and capping
nut on other end.
Tighten.
9
front wheel on
1.
2.
3.
4.
Insert axle tube through
front wheel hub.
Thread small spacers and
nylon bushes on each end.
Place axle and wheel
between forks.
Place axle and wheel
between forks.
10
ENGLISH
front wheel on
5.
6.
7.
Insert threaded rod with
capping nut on one end.
Place capping nut on other end.
Tighten.
11
front wheel off
1.
2.
3.
Loosen one capping nut.
Pull out threaded rod.
Remove front wheel.
12
ENGLISH
assemble the handlebar
1.
2.
3.
4.
Insert handlebar through
forks, rubber rings and
handlebar collar.
Insert handlebar through
forks and handlebar collar.
Tighten two screws.
Ensure your handgrips
fit securely – they are an
important safety measure.
13
flip the frame over
1.
2.
3.
4.
Remove seat.
Remove front wheel.
Undo nut on the underside
of the headset.
Loosen threaded rod using an
allen key in the capping nut.
14
ENGLISH
flip the frame over
5.
6.
7.
8.
Remove threaded rod.
Flip frame over.
Tighten nuts and
threaded rod.
Replace seat.
Replace wheel.
15
adjust the seat
see, that was easy
1.
2.
Loosen and remove capping
nuts and bolts.
Child’s feet should be flat
on the ground.
16
ENGLISH
eco bike
maintenance
Every Wishbone Bike is made
from plantation-sourced woods
and is glued and finished with nontoxic products. The Bike box and
all paper inside is recycled and
printed with non-toxic inks.
The canvas bag for extra parts
is made from certified organic
cotton. Every component on this
bike is fully recyclable.
Make regular inspections of all
fastenings to make sure they are
tight. Normal wear and tear may
make them loosen.
We recommend you keep all tyres
inflated to max 25 psi. Tube valves
are car size – pump them up when
you visit the gas station.
Clean with warm water and a
soft cloth. Lubricate wheels lightly
with a standard bike oil. Use a
wood wax or polish to maintain
the wooden components finish.
Do not store your bike outdoors.
WARNING!
This product contains small parts
that present a choking hazard.
For safety reasons, this product
is to be assembled by an adult.
We recommend that proper
protective gear be worn while
riding a Wishbone Bike.
This includes closed shoes,
an approved safety helmet and
adequate protective clothing
such as long pants or elbow/knee
pads. Never allow more than one
rider at a time.
For your child’s safety and
the safety of others, use great
caution at all times.
To reduce the risk of injury,
adult supervision is required
at all times. In particular, the
rider should be coached in the
use of his or her feet to brake
and stop the bike.
Never use on public highways
or in areas where motor vehicles
are present or on sloping areas.
Do not use near steps, driveways,
roadways, bodies of water, or
swimming pools.
Wishbone is not responsible for
any injuries suffered while using
Wishbone Bike. The purchaser
assumes the risk of any activity they
engage in with the Wishbone Bike.
17
warranty
We want you to feel confident in
the quality of our products and
customer service.
So we have warranted our
products against manufacturing
defects for one year from the date
of purchase. Within this period, we
will be pleased to repair any
product or component that has a
manufacturing defect or, if we
think it is necessary, replace it,
free of charge. Your first contact
point for any warranty query is
your store of purchase.
18
Our warranty extends to an
original purchaser who bought
new product from an authorized
dealer of our products. Please
have your proof of purchase
ready. Any freight charge to
deliver the product back to us
or our representative is all you’ll
need to pay.
If you bought your bike second
hand (well done!) or have modified
it somehow, if you have not used
or maintained it properly or if the
problem is really just normal wear
and tear, then you probably don’t
qualify for our free-of-chargerepair-or-replace warranty.
But you are welcome to contact us
anyway. We’ll do our best to help
you. Again, contact your store of
purchase first.
Please note that in some countries
or states you may have more
rights too.
THIS WARRANTY IS MADE
IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT
LIMITED TO, WARRANTIES OF
MERCHANTABILITY OR
FITNESS FOR A PARTICULAR
PURPOSE, AND THERE ARE
NO OTHER WARRANTIES
THAT EXTEND BEYOND THIS
EXPRESS WARRANTY.
certificate of ownership of wishbone bike
first owner
make:
wishbone bike
model:
Mark II
serial number:
name of first owner:
birth date:
year of original purchase:
place of purchase:
what i like best about my bike:
100
birthdate:
what i like best about my bike:
year and place of transfer:
(brother, sister, cousin, neighbour, friend, lucky stranger)
relationship to previous owner:
birthdate:
fifth owner
name:
what i like best about my bike:
year and place of transfer:
(brother, sister, cousin, neighbour, friend, lucky stranger)
relationship to previous owner:
birthdate:
fourth owner
name:
what i like best about my bike:
year and place of transfer:
(brother, sister, cousin, neighbour, friend, lucky stranger)
relationship to previous owner:
birthdate:
third owner
name:
what i like best about my bike:
year and place of transfer:
(brother, sister, cousin, neighbour, friend, lucky stranger)
relationship to previous owner:
birthdate:
second owner
name:
what i like best about my bike:
year and place of transfer:
(brother, sister, cousin, neighbour, friend, lucky stranger)
relationship to previous owner:
name:
ENGLISH
This is to CERTIFY that the Wishbone Bike described below has been owned and loved by the following riders.
sixth owner
101
stamp here
Wishbone Design Studio Limited
77 Severn Street, Island Bay
Wellington 6023
New Zealand
our warranty
gewährleistung garantía garantie garanzia garantie
name
age
address
email
phone
number of children
1-2 yrs
3-4 yrs
5-6 yrs
place and date of purchase
Would you recommend the product to someone else? Why? Any ideas you want to share with us?
Please send me information about your new products and promotions
www.wishbonebike.com
Designed in New Zealand
© 2009 Wishbone Design
Studio Limited
77 Severn Street
Wellington 6023
New Zealand
+64 4 389 1959
info@wishbonedesign.com
The Wishbone Bike and its
components are protected
by intellectual property
rights, including copyright
or equivalent rights,
Australian patent number
2006100966, and US
patent number D561,649.
Wishbone Bike meets
or exceeds the following
toy safety standards:
EN71: inc A4:2007
US ASTM F963
AS/NZS ISO 8124
Distributed by: