Modolo Catalogo 2016-finale-web-ok

products catalogue
2016
More than 65 years in bikes innovation
The making of an Italian Legend
Started in 1952 in a small factory in the north-eastern Italian town of Santa Lucia di Piave by
Mr. Adamo Modolo, the company initially made a variety of steel parts for bicycles.
Domenico Modolo (son of the founder), joined the company in 1976 having graduated as a
industrial engineer. Soon afterwards the famous TOP brake-set, made in light alloy, commenced production. These brake-sets were exported all over the world and set the standard for
high quality Italian aftermarket components.
Only a few companies in the world of cycling can be proud
to have a successful history of more than 65 years and to
be still in the forefront of innovation.
Modolo is known for its innovative, lightweight, safe products, made with a typical Italian flair for design.
With Joy and Sincerity we can say to have contributed to
the great history of Cycling with our innovation, and we
hope to continue our way guarantee the best product to
our customers .
Modolo products are distribuited by
Modolo Italia srls
Via B. Croce 62
31015 Conegliano (TV)
Italy
Info : info@modolo.it
Technical : nico@modolo.com
Sales : serena@modolo.com
www.modolo.com
kx ieros
Road Carbon Wheels
Carbon
H 42
Super
Sliding
TRINITAS
CROSSING
Modolo KX IEROS, the Top-range wheel set developed to ensure the best
performance to professional rider. With special resins resistant to high temperature, the braking surface has the same efficiency of aluminum and
special brake pads are not required anymore. The slip/jump’s tolerance is
certified one by one and signed by hand in each wheel.
Modolo KX IEROS uses Sapim CX Ray spokes with elliptical section & aluminum forged nipples based on spherical stainless washer, to better distribute
the stress on carbon fibers and providing a perfect alignment.
Made in Europe & Hand Assembled in Italy.
A magnet is placed inside the rims
and can be used as speed/cadence
sensor.
A special undulating shape under
the braking area is designed to
improve aerodynamics compared to
conventional wheels.
The Hubs use Super Sliding
Sealed Bearings offering a super
smooth riding & low friction.
TRINITAS Crossing provide
perfect reaction and control,
reducing power dispersion from
your legs to the wheels.
Rims : Carbon Monocoque 9K | Size : 622 x 13,5-18 H42
Spokes : Sapim CX-Ray Black | Nipples : Sapim Poliax Red anodized
Hubs : Forged SL, SS bearings, Black or Red anodized
Axle : Front Q/RL - 5x10-20H | Rear Q/RL - 5x130-24H
Crossing : Front Radial | Rear TRINITAS | Color : White/grey or Red/Grey
Cassette : Shimano 10-11 | Campagnolo 10-11
Weight : Clincher 1.430gr. | Clin.Disc 1.580gr.| Tubular 1.220gr. | Tub. Disc 1.380gr.
AEON ASL
MTB Pro Wheels : 29” & 650B
AL
Aluminum
ULTRA
Asymetric
Super
Sliding
TRINITAS
CROSSING
AEON ASL stands for Asymmetrical Super Light. A new rim with asymmetrical section is introduced in this top range wheel sets to give maximum precision to spokes tension and hub alienation. This new set of super light wheels
was born with the intent of drastically reduce the weight of the bike, but with
absolute safety, to best suit the needs of XC/Marathon competition. Available in 29" & 650B !
The AEON SL 29" & 650B uses new ultralights hubs in Al7075 finely CNC
machined, with NITRO Sealed bearings.
The use of hybrid combination of 16x2 + TRINITAS Crossing in the rear
wheel give a rigid and snappy feeling.
24,4mm
20,8mm
16,5mm
( 650B)
Thanks to this new Asymmetric rims we can use a 32+32 hole set without
exceeding in weight, but ensuring precision, control & stiffness, a must for
wider wheels such as 29” & 650B !
AEON ASL wheels are hand assembled , one by one, in Italy !
Rims : Extra Alloy Made in Europe | 650Bx21mm or 29"x21mm
Spokes | Nipples : Sapim CX-Ray Black | Sapim Poliax Red Anodized
Hubs : AL 7075 T6 CNC Finely Machined with Nitro bearing, Black
Axle : Front 15x100 mm - Customizable | Rear 12x142 mm - Customizable
Crossing : Front - X2 / Rear - Trinitas
Color : Black Rims - Black-Red or Black-Grey stickers
Weight : 650B = 1.295 gr. | 29" = 1.360 gr.
AEON SL
MTB Wheels 26”
AL
Aluminum
Super
Sliding
SL
TRINITAS
CROSSING
Aeon SL 26" Wheels, a reference point for XC-Wheels : Superlight hardened
aluminum rims, Sapim Cx-ray spokes, TRINITAS Crossing and forged
aluminum hubs with Special Japanese Super Sliding sealed bearings.
Very light but safe, high-performance wheels. Hand-built in Italy by Modolo.
Rims : Alu-6082-T6 welded | Size : 559 X 17 H18
Spokes : Sapim CX-Ray Chrome Black | Nipples : Sapim Red Anodized
Hubs : Forged Disc SL, Super Slide sealed bearings
Front Axle : Q/RL - 5x100 -24H. | Rear Axle : Q/RL - 5x135 -24H.
Crossing : Front : X2 / Rear : TRINITAS | Sticker color : Red
Weight ( pair) : 1470 gr.
psyche SL
ROAD Wheels
AL
Aluminum
SL
Super
Sliding
TRINITAS
CROSSING
Psiche SL is the new Road Wheelsets with Aluminum 6082-T6, 30mm h
rims welded. Great performance, optimum price, the Psiche SL uses Lamined Spokes, forged Hubs CNC machined with Super Sliding Sealed Bearings. Perfect for the agonist as well as the most exigent amateur, this
wheels are lightweight and aerodynamic.
Rims : Alu-6082-T6 welded | 622 x 13,5-18 H30,5
Spokes : Sapim CX-Ray Black | Nipples : Red Anodized
Hubs : Forged SL, Super Slide sealed bearings, Red Anodized
Front Axle : Q/RL - 5x100 -20H. | Rear Axle : Q/RL - 5x135 -24H.
Crossing : Front : X2 / Rear : TRINITAS | Sticker color : Red
Weight ( pair) : 1470 gr.
trinitas crossing
TRINITAS
CROSSING
Pul
l
50%
On the bicycle market the research of lightness is often in conflict with the
resultant stiffness of the components. A balanced stiffness is needed to
ensure the maximum mechanical transmission of the power of the athlete to
the ground. If a wheel is too flexible we will lose enormous power, if too rigid
we will not be able to endure in long distance race feeling pain and fatigue.In
classical crossing such as X1/X2/X3 the power transmitted from the hub to
the rim is partially dispersed, in radial crossing there is not enough torque to
ensure a reactive and snappy feeling.
3%
ll 3
Pu
Push
Thanks to TRINITAS Crossing we can combine perfectly the force involved
to give the best power transmission and comfort for a real professional ride.
There are 2 spokes transmitting the pulling force dynamically, the effort
gradually passes from the first spokes (50%) to the second that (33%), the
third (with the head outside) act as a push mechanism absorbing much of
the compression forces.
We use this crossing in the rear Wheel to ensure the best traction a power
transmission. All Wheels are hand assembled one by one in Italy by Modolo!
KX CURVISSIMA
Road carbon handlebar
Carbon
UD
linear fibres
The road handlebar KX made in Carbon -kevlar monocoque, has a superergonomical grip.
“CURVISSIMA” bend born in 2000 at Modolo, is the direct evolution of the
anatomical bend patented by Modolo in 1985 that allowed only two hand
positions. The new bend has a super-comfortable micropositions grip. It’s
more compact, stiffer and more comfortable.
Material : Carbon Monocoque & Kevlar – UD linear fibres
Surface : Transparent UV protection, sanded grip area
Size (center-center) : 40-42-44 cm | Diameter : 31,8 mm
Color : Black/Natural | Weight: 199/219 gr.
KX MTB-xc
Mtb carbon handlebar
Carbon
UD
linear fibres
Modolo KX MTB-XC handlebar Flat or Rise in high modulus carbon linear
fiber and kevlar for a very technical handlebar that focus only to reach the
perfection of the product and the purity of the design.
The KX MTB-XC is lightweight, specially reinforced with Aramid Kevlar
inserts in the clamping area of the stem and bar-ends. We use LongFiber
technology for the whole range of carbon-kevlar handlebars.
Approved by severe DIN-Plus standards.
Material: Monocoque Carbon Kevlar UD | Surface: Clear Coating - sanded grip area
Size: 58cm(flat) | 64 cm(rise) | Diameter : 31,8mm | Angle: 3°(flat) | 6.5°(rise)
Reach: 0mm(flat) | 25mm(rise) | Color: carbon UD | Weight: 139gr.(flat) | 149gr.(rise)
KION Super-light racing stem
Modolo Kion stem, super light and elegant made of Alluminium 2014 T6.
The Modolo Kion stem with his light weight match perfectly with high-end
handlebars, either Road or Mtb. 115 gr. only !
Material : ALU 2014-T6
Size : 90-100-110-120 mm
Diameter : 31,8mm
Weight : 115 gr. (100mm)
Color : anodized black
VENUS
Road handlebar for small hands
AL
6061-T6
SHOT
PEENING
Modolo Venus Handlebar, a special geometry born in 1999 at Modolo for
people with small hands; with this shape the brake levers are brought almost
9mm nearer.
In 2005 the design has been modified in the lower part of the grip, so now it
has the same “CURVISSIMA” shape as other Modolo handlebars, giving an
increase in comfort by allowing an infinite number of micro-positions.
Material : 6061 T6 butted | Surface : Ceramic shoot Peening
Size ( center/center) : 34 – 36 – 38 – 40 cm | Diameter : 31.8 or 26 mm
Finish : Black Anodized | Weight : 269 gr. (40cmx31.8)
AL
GRANFONDO
Road rise comfort handlebar
6061-T6
SHOT
PEENING
Modolo Granfondo is back ! Firstly introduced in the late 1998 the Granfondo handlebar is a must have for long distance ride.
The higher raise allow a very comfortable rest-giving position, that is extremely appreciated in the long distance races. The shape allows also a long,
comfortable area in the lever zone.
Made of the finest material from Modolo.
Drop 139
rise 30mm
reach 81
Material : 6061 T6 butted | Size ( center/center) :41 cm
Diameter : 26 mm | Finish : Black Anodized | Weight : 345 gr.
SHOT
PEENING
The “shot peening” process was first introduced by Modolo in 1990.
Shooting the metallic surface with calibrated ceramic spheres produces
a relaxation of the surface tensions and an overall increase of the mechanical properties of the material of more than 30%.
DUMBO 3D
Adjustable multi-positions handlebar
AL
5086
Adjustable
After the Modolo Yuma, designed to increase comfort for trekking riders,
came DUMBO … With DUMBO you can adjust the handlebar geometry
when and how you wish, obtaining the best possible riding position. Simple
in adjustment, strong in its forged blocks & lightweight, DUMBO can
become a real “dashboard”, allowing the mounting of bags, computer,
mirrors, lights, bells, etc.
Any user has now the opportunity of fitting the handlebar to his own riding
style to find the maximum comfort position.
Material : 5086 H32 light Alloy
Size : 53 to 59 cm
Rise : up to 35 mm
Diameter : 25.4 mm
Color : Bright Black anodized
Finish : Laser printed references
Weight : 629 gr.
YUMA
Multi-positions handlebar
AL
5086
The Modolo Yuma Handlebar, multi-positions made of quality material.
A very versatile and comfortable handlebar, developed for trekking and
touring bikes, born in the late 1992 at Modolo.
Thanks to its particular design, Modolo Yuma Handlebar offer great hand
protection, shocking absorption and 3 hand positions. With this handlebar
you will improve your bike ride, avoiding hand pain in the long ride.
Material : ALU 5082 H32 | Size : 560mm | Color : Silver or Black anodized
Weight : 390 gr.
MOHICAN
Multi-positions handlebar
AL
5086
Modolo Mohican handlebar multi-positions, built with high-end material, add
several hand position and protection to your hand.
Thanks to Modolo Mohican handlebar you will have 3 different positions for
your hand, the particular geometry help in protecting your hand.
Material : ALU 5036 | Size : 560 mm | Color : Silver or black anodized
Weight : 320 gr.
PISTA
AL
Pista handlebar
6061-T6
Modolo Pista Handlebar, a retro-modern track bar, conceived for the singlespeed urban market. A high-end bar with a simple, classic shape.
Modolo Pista handlebar will improve your bike’s beauty!
High anodized finiture and old style Modolo logo in laser.
68
33 °
155
78
R
75
Material : AL 6061 T6 | Surface : anodized, laser logo
Size : 42 cm | Diameter : 26mm
Color : Silver | Weight : 270 gr
Q-RACE 11
CNC machined classic stem
Modolo Q-Race 11 stem, perfect for vintage bike, made in alluminium
6061-T6 CNC machined.
Light and secure, perfect for fit in old and vintage bike.
Material : ALU 6061-T6 | Size : 90-100 mm
Diameter handlebar : 26mm | Diameter fork : 22.2mm
Color : Silver Anodized with Red anodized dust cap & lock
Weight : 280 gr.
MORPHOS
Integrated Lever
Modolo Morphos integrated lever, one of the most versatile and compatible
lever in the World ! Developed by Domenico Modolo in 1998, the Morphos
is compatible with most of the common gear such as Shimmano 7,8,9,10
speed and Campagnolo 8,9,10 speed, support also 5/6 index as well.
Modolo Morphos integrated lever, the future for your old bike. With Modolo
Morphos integrated lever you can brake while shifting. Made with high
quality material of aluminum 7075 and thermoplastic carbon fiber.
A masterpiece of technology special designed by Domenico Modolo, with
this lever you can take your old bike to future, keeping it very light, a pair of
lever is only 375 gr.
Material : ALU 6081-7075- thermo-plastic carbon fiber
Compatibility : Shimmano 7,8,9,10 / Campagnolo 8,9,10 V.
Weight : 375 gr. | Color : Carbon look / Vintage silver
treviso Leather saddle bag
Handmade leather bags, perfect
for saddles or handlebars. With
laces and steel clip, perfect to hold
small objects during your ride
cortina
Leather frame bag
Handmade leather bags, perfect
vintage bike frame. With laces and
steel clip, to hold small objects
during your ride
Bike bag | whells bag
transport bag
Classical Modolo red bags for bike & wheels transport.
Hand made in Italy !
Bike Bag :
With zip and wheels compartment.
Wheels bag single & double :
Whit zip, highly padded for
great protection.
Our passion
for cycling
is deeply rooted
Since 1952
Our ideas
have become
the standard
in the cycling sector
Our research
and development
create great products
for winning athletes
Modolo always
aims to the future
Ho disegnato i prodotti Modolo fin dal 1976, quando giovanissimo, giravo
in bici da corsa. Oggi, per la salutare passione della bicicletta mi dedico anche
alla MTBe Trekking ed assieme a mia moglie Serena ho scoperto la passione
del Cicloturismo.
Quest’anno nostro figlio Maximilian, rifondando la MODOLO ITALIA
riprende lo spirito di raffinata artigianalità Italiana e forte innovazione che
ha contraddistinto la produzione Modolo dal l’anno di fondazione 1952, per
opera di mio padre Adamo. Le linee di prodotti attuali e che verranno, sono
e saranno di nicchia, colme di esperienza tecnica e passione, disegnate per i
cultori dello Stile Italiano e della Perfezione : firmate da me,
Modolo Domenico
www.modolo.com