corporate profile - Daitec Holding Co., Ltd.

Transcription

corporate profile - Daitec Holding Co., Ltd.
CORPORATE PROFILE
Chikaramachi Building (Headquarters)
Daitec Group
◇ Greetings
Daitec launched its business in 1969 as a small company, or what we call a venture company nowadays. It was in
the 1960s when big firms started implementing computers for
their business operation, which boosted the management
innovation.
We were then committed to apply the management improvement to small and medium enterprises, and to begin with,
the company started developing the POS system for sales of
oil as a primary target. We also opened information processing hubs for the POS system throughout the country, and in
1980 we formed a business tie-up with Nippon Oil. Today, our
POS system for sales of oil dominates the industry providing
thousands of customers with information applying telecommunication lines and IT terminals.
In the late 1980s, the IT industry became flooded with
the diffusion of personal computers and influx of internet. As a
step following the POS system for sales of oil, Daitec succeeded in development of the CAD system for construction
facility businesses, and started providing the system to the
construction facility industry that handles electric, ventilating,
and water supply and drainage constructions. Total sales of
the CAD system for construction facility businesses, which
has been labeled as the best selling intelligent CAD, have
exceeded 100 thousand units and we are proud to have been
contributing to the industry’s innovation.
Today, a variety of technology, idea and hardware are
produced in the field of IT. At Daitec, we have formed a project
team to make a development in the third industry, create new
businesses, and to achieve constant growth through promotion of our customers’ benefit.
We look forward for your continuous support.
July 2011
Makoto HORI
-1-
◇ Outline of the Daitec Group
The Daitec Group, under the umbrella of the Daitec
Holding, is formed by the following companies: Daitec, the
top-of-the-market company in CAD for construction facility
businesses; Daitec Solution that is into development and
operation of the POS systems for ENEOS, and Music Ventures that operates the “NAGOYA Blue Note”, and the related
company, Fukui Computer. An overall business operation of
the entire group can be found in the figure below.
The Daitec Group is also the founder of “The Hori Sciences and Arts Foundation” which has granted a total of 710
million yen research subsidy to around 700 researchers ever
since its foundation, thus providing support to scientists and
artists for over 20 years.
Daitec Sakae
(rental hall and meeting room)
NAGOYA Blue Note
Digital Documentation
(printing and bookbinding)
Daitec Solution
(POS systems for ENEOS
and related companies)
Daitec Co., Ltd
(CAD for construction
facility businesses)
IDC Service
(Internet
Data Center)
Daitec Holding Co., Ltd
(overall business operation of the entire group)
Fukui Computer, Inc.
(related company)
U.S-SOHO Fushimi
(rental Office with Secretaries)
The Hori Sciences and Arts Foundation
Hori Art Museum
(along the Culture Path)
(contribution to society)
◇ Organization Chart
[Holding company]
Daitec Holding Co., Ltd.
Daitec Co., Ltd.
【100%-owned subsidiary】
Daitec Solution Co., Ltd.
【100%-owned subsidiary】
Music Ventures Co., Ltd.
【90%-owned subsidiary】
Fukui Computer, Inc.
【42.4%-owned related
company】
The Hori Sciences and Arts Foundation
【contribution to the
sciences and arts】
Hori Arts Museum
【collection and exhibition
of Japanese painting】
-2-
Daitec Holding Co., Ltd
http://holding.daitec.co.jp
A holding company controlling the
entire Daitec Group which business scope
ranges
from
corporate
planning,
administration,
human
resources,
accounting of the group companies, to
digital printing and real estate business.
Starting from the foundation of Daitec
in 1969, it has expanded its business
through development and operation of the
POS system for sales of oil, development
and sales of the CAD system for
construction facility businesses, and have
gained high market share in the industry.
Naka-ku, Nagoya City
Daitec Sakae Building
The group registered its shares for the over-the-counter trading at
JASDAQ in June 1995 to go public. After 11 years in June 2006, the
company took its decision to go back to be unlisted which was part of
streamlining the business and to enable speedy management decision
making. A month later in July, Daitec founded the Daitec Holding to take
control over the management of the group companies. There was a
reorganization of business in October 2009, in which achieved the Daitec
Solution assuming charge of the SS-POS system to become
independent from Daitec. This led the establishment of the two-company
system of CAD and POS, and to date, Daitec Holding takes charge of
the business management of the two companies.
While we are engaged into business management of the entire
group, our business also expands to the field of digital printing and real
estate.
In the digital printing business, we offer on-demand printing,
publishing, and bookbinding services, enabling cost cut even for small
amount of printing and bookbinding.
Major real estate businesses of the Daitec Holding are the rental
services of conference rooms at the Daitec Sakae Building in Sakae, and
the rental office business at “U.S-SOHO Fushimi” in Fushimi, both in
Naka-ku, Nagoya City.
In October 2010, the company acquired 42% share of Fukui
Computer Inc. (Securities code 9790, first section of the Tokyo Stock
Exchange) through TOB. Being the largest shareholder, the Daitec
Holding intends to exert the capital and business partnership effect
through joint research and development of products, mutual business
support, and exchange of human resources.
-3-
Daitec
http:// www.daitec.co.jp
Daitec develops and sells the “CADWe’ll Tfas” and “CADWe’ll
CAPE”, intelligent CAD software exclusive for construction facility businesses. These are essential software for facility engineers that enable
high functional technology including automatic piping drawings and 3D
drawings. The entire supply chain from development, sales, and support
is managed by our company, hitting a total sales record of over 100
thousand software, being one of the best selling CADs.
Main customers
Example of use
* Ministry of Land, Infrastructure, Transport and Tourism
* Kajima Corporation
* Takasago Thermal Engineering Co., Ltd.
* Sanki Engineering Co., Ltd.
* Toyo Netsu Kogyo Kaisha Limited
* DAI-DAN Co., Ltd.
* Kandenko Corporation
* Kinden Corporation
* Toenec Corporation
* Kyudenko Corporation
* Grand Tokyo
* Nippon Television Network Corporation
(for new premises)
* Roppongi Hills
* Tokyo Dome City Amusement Park
* New Marunouchi Building
* COREDO Nihonbashi
* Midland Square
* Chubu International Airport (Centrair),
and many facilities
Our widely used “CADWe’ll Doboku” which is exclusively
designed for civil engineering corresponds to designing, construction
drawings, and e-mail submission to clients. Daitec also contributes in the
promotion of CALS/EC through services such as the “Electronic bidding
WinSuite ASP” for government offices to place orders in public works.
Our services include the “WebCADD.com” which enables client to use
certain software through internet access on per-time charging. Daitec’s
target is to allow customers to have access to various software by making use of the cutting edge technology including the cloud computing.
Construction
facility CAD
“CADWe’ll Tfas”
Integrated CAD for construction facility to fit the practical
use of facility engineer
- Advanced high-function 3D
- Intuitive and easy operability
- Highly accurate “data compatibility” with other CADs
“CADWe’ll CAPE”
Bestselling construction facility CAD with a great deal
of actual results and confidence
- Bestselling construction facility CAD that 15 years
have passed since its introduction
- Standard CAD corresponding to 2.5 dimensions
(development to cross-dimensional drawing)
Civil Engineering
CAD
“CADWe’ll Doboku”
Civil Engineering CAD to improve the work efficiency at field site
“ARCDRAW”
General CAD
Definite edition for 2D general CAD
ASP Service for Ordering
of Government Offices
“Electronic bidding WinSuite ASP”
Electronic bidding systems by ASP methods
-4-
Daitec Solution
http://ss.daitec.co.jp
Main Systems
Daitec Solution was the first in the
* SS system
country to develop and operate a POS
* Direct and wholesale system
* FC system
system for sales of oil. As of March 2011,
* Receiving and placing order
our POS system is used nationwide in
systems
around 4,500 energy computer centers
* Negative authorization system
designated by the JX Nippon Oil and Energy Corporation, and the simple credit
Related sub-system
card terminal for the same company is
* SS-Navi
* Direct sales-Navi
used in approximately 1,400 service sta* Electronic books system
tions (SSs), making it the top share in the
(Archivist)
country. Ever since the company’s foundation, we have been committed to build, develop, and operate systems
that meet customer demand of the time, providing them with full support.
By making the most of the knowledge and skills accumulated throughout
the years, Daitec Solution will offer systems for sales of oil that will enhance client’s profit through improved management.
【Flow of Information Processing】
Daitec Soluti on
(Computer Center designated by JX Nippon Oil
& Energy Corporation)
Wide-ranging information data, etc
E RI X netw ork
(Online network of JX Nippon Oil
& Energy Corporation)
Sales amount data from POS, etc.
Oil sales compa ny
Storefront
Office
Headquarters
Sales functions
Data store of customers and
sales amount
Processing and utilization of
shop data
Customer management
service
Analysis system of sales
promotion activity
Target management system
Overall SS control
operations
Sales, purchase and
inventory system
Processing and utilization of
shop data
ERIX-POS, etc.
ERIX-POS, etc.
ERIX-POS, etc
The IDC (internet data center) which opened in January 2000 is
equipped with large mainframe computers and the latest server groups
of various types, which mainly provides information processing services
for service stations and other services such as server hosting. It offers
high-tech information security with in-house power generation in case of
power outage and other fully prepared facility against disaster
management for earthquakes.
IDC Service
* Information processing
for oil sales
* Server housing
* Dedicated server service
* Mail representative
service, etc.
IDC facilities
* Antiseismic and fire-resistant building
* Quake-absorbing floor device
* Emergency generator
* PPS (permanent power supply)
* Auto-security system
* Water leak sensitive system
* Entering and leaving through
fingerprints system, etc.
-5-
ISO certifications
* ISO/IEC 27001
(Information Security
Management System)
*ISO 9001
(Quality Management System)
Music Ventures
http:// www.nagoya-bluenote.com
We opened the “NAGOYA Blue
Note” a New York born jazz live house in
November 2002. Since its opening,
more than 1,500 artist groups have
performed on stage with a total of over
550 thousand spectators. The NAGOYA
Blue Note offers a luxury entertainment
space where artists and audience blend together.
Other than the ordinary live performances, it offers renting services
of the stage and audience seats, and also an original wedding ceremony
event limiting to one couple a day. Audience can indulge in music and
food with the same stage as the artists under a top-class audio and
lighting system with various performances.
Live performance schedule can be found in our website or the
monthly issued “VOICE”.
◆Reservation and Inquiry◆
T E L 052-961-6311
U R L http:// www.nagoya-bluenote.com
Fukui Computer, Inc. (related company)
http:// www.fukuicompu.co.jp
It became an affiliate of Daitec Holding through TOB in October
2010. Fukui Computer intends to mutually cooperate with the Daitec
Holding in the field of management, marketing and technology, while
enhancing personnel exchange and aiming for further development.
Its main business is development and sales of CAD for the field of
construction including architecture, measuring, and civil engineering.
With 36 sales office network nationwide, Fukui Computer produces
many best selling CADs as the top developer of construction CADs.
◆Corporate Profile◆
Established:
President:
Capital:
Headquarters:
December 1979
Masaru FUKINO
1631.7million
2501, 1-chome, Chuo, Takagi, Fukui City,
Fukui Pref., Japan 910-8521
Employees:
405 people (as of April 1, 2011)
Description of business: Development and sales of CAD software on
construction, surveying and civil engineering
-6-
The Hori Sciences and Arts Foundation
http://www.hori-foundation.or.jp
The Hori Sciences and Arts Foundation is a nonprofit public-interest
corporation which was founded for social contribution by the Daitec
Group and the personal fortune of the founder Makoto Hori in 1991. On
September 1, 2010 it was certified as public interest incorporated foundation by Aichi Prefecture thus changed its name to Public Interest Incorporated Foundation, The Hori Sciences and Arts Foundation.
- Main Activities 1.Granting research subsidies to scientists
Ws have subsidized a total of 710 million yen to over 700 research
cases in the past two decades.
2.Hosting “The D-art Festival”
The foundation provides young artists with opportunities to present
their work. This festival is held every two years with the objective of
supporting creative art activities of young professionals.
3.Operation of “The Hori Art Museum”
The museum boasts its collection of the great art masters of the
Showa Era including paintings of Ryuzaburo Umehara, Tsuguharu
Fujita, and Setsuko Migishi.
Address:
Established:
4-4-2, Chikara-machi, Higashi-ku,
Nagoya City, Aichi Pref., Japan 461-0018
September 26, 1991
(certified date of public utility foundation)
◆Hori Art Museum (along the Cultural Path, attached to the Hori Foundation)
The Hori Art Museum, with art collection of the Daitec Group and
Makoto Hori, founder of Daitec became open to the public in June 2006.
The museum displays works of the well known art masters of the
Showa Era and big art pieces of Setsuko Migishi, a female artist origin of
Aichi Prefecture, representing each of her art period.
Hour of opening: 12:30 to 17:00 (admission available till 16:30)
Closed:
On Mondays (the next day if the public holiday is on
Monday), the days to put documents in order, summer
vacations, year-end and new-year
Location:
4-4-2, Chikara-machi, Higashi-ku, Nagoya City, Aichi
Pref., Japan 461-0018
TEL:
052-979-5717
URL:
http://horimuseum.jp/
-7-
◇ Other Businesses of Daitec Group
■Digital Printing
We offer on-demand printing,
publishing, bookbinding, and outsourcing services of academic conferences. Our services enable printing of necessary things
anytime, any amount, anywhere at a reasonable price.
◆ Inquiry◆
TEL: 052-856-6645
E-mail: odp@daitec.co.jp
FAX: 052-856-6646
URL: http://odp.daitec.co.jp
■Rental conference rooms
We rent conference rooms at
Daitec Sakae in Naka-ku, Nagoya
City. There are all together 21 rooms
available from big halls (330 m 2,
capacity 300 people) up to small
meeting rooms (16.5 m 2 good for 8
people).
◆ Inquiry◆
TEL: 052-971-3830
FAX: 052-971-2910
E-mail: daitecsakae@nagoya-kaigi.com
URL: http://www.nagoya-kaigi.com
■Rental office
Our “U.S-SOHO Fushimi” offers
office space for rent with secretarial
services. Located at a minute-walk
from the station, the building has a
total of 82 private individual rooms with windows facing the
south. High-speed internet access, lounge, conference
rooms, and parking lots are available too.
◆ Inquiry◆
TEL: 052-204-0300
FAX: 052-204-0201
URL: http://www.us-soho.co.jp
■IDC (Internet Data Center)
Services offered at our IDC
vary from cloud computing to many
other types. We have the latest
server groups equipped with enforced information security that
corresponds to power outage and earthquake, ensuring
disaster management to secure safety of information.
◆ Inquiry◆
TEL: 058-240-6222
URL: http://ss.daitec.co.jp
-8-
◇ Business Outline of the Daitec Group
○ Sales and marketing
We have 9 business branches (Hokkaido, Tohoku, Tokyo, Chubu,
Hokuriku, Kansai, Chugoku, Shikoku, and Kyushu) across the country
engaged into sales and marketing. The CAD department promotes IT of
the construction industry by making proposals and sales of the CAD
software, mainly focusing on the CADWe’ll Tfas series to all kind of
companies from major construction companies and subcontractors to
local small and medium facility companies. We have changed our marketing approach from April 2010 with new types of selling method including the sale of 5-year right of use, renting services, network license,
and the WebCADD.com that allows use of software through internet
access on per-time charging. Customers can reach to our products
according to their needs through our latest selling methods.
The POS department proposes and enhances use of the system
in managing sales, collecting sales proceeds, and gathering customer
information for sales of oil. We offer implementation of the latest system
to our existing customers based on their current usage and needs, while
for new clients, we start from making presentations and proposals of the
system. In both CAD and SS-POS business, we make direct sales to
our customers and do not use business agents. The sales and management department checks customer satisfaction, needs and request
and provides the software development department with feedback in
order to come up with a competitive software product.
○ Technology
The Technology Development Centers in Nagoya and Sapporo
are engaged in software development. The CAD department creates
the concept for new products based on the accumulated knowledge and
skills for development and market investigation, and develops the cutting-edge high functional CAD software. Currently our product is
equipped with 3D function that allows creation of design and construction drawings, presentation to construction client, thus conserving space
originally needed for machine and equipment. We correspond to various
customer needs.
The company encompasses investigation of customer need, designing, and up to development, in short, the whole supply chain of
software development and sales. No personnel dispatch or subcontracting of software production is done in our business line.
-9-
○ Support
Both the CAD and POS departments have a call center to correspond with customer enquiries on use and function of the software
products. We do not just only answer to customer queries, but also
gather customer needs and information as the frontline of the company,
analyze the information obtained that could related to a new development concept, and give feedback to the product development divisions.
At the CAD department, we provide CAD training opportunities to
customers as part of the after sales service.
○ Data center
Every day, the IDC (internet data center) processes data sent from
the 4,500 SSs throughout the nation. With its latest server groups
equipped, it offers high-tech information security with in-house power
generation in case of power outage and other fully prepared facility
against disaster management for earthquakes. It also offers the cloud
computing service to support efficient network environment including the
server housing for clients as a corporate data center。
○ Management and planning
The management and planning department is under the Daitec
Holding and handles administrative matters, human resources, accounting, finance, and corporate planning of the entire group. It is a
group of professionals in administration and management that controls
the budget, monthly accounting closing, management analysis, employment activities, and staff training to back up the Daitec Group.
Workplace of Engineering Dept.
-10-
◇ List of Daitec Group
-HeadquartersChikaramachi Bldg. 4-85, Chikara-machi, Higashi-ku, Nagoya City, Aichi
Pref., Japan 461-0018
TEL: 052-856-5520
-Front officeOmori MH Bldg. 6-16-19, Minami-oi, Shinagawa-ku, Tokyo, Japan 140-0013
TEL: 03-5762-3511
●Daitec
TEL: 03-5762-3510
●Daitec Solution
-Business and branch officesHokkaido
Daitec Sapporo Bldg., 10-5-3, Nishi, Minami-nijyo, Chuo-ku, Sapporo City 060-0062
Hokkaido business office
TEL: 011-222-9631
●Daitec
●Daitec Solution
Hokkaido business office
TEL: 011-222-6512
Tohoku
9-2, Tachi-machi, Aoba-ku, Sendai City 980-0822
TEL: 022-225-0141
●Daitec Tohoku business office
TEL: 022-225-0141
●Daitec Solution Tohoku business office
Tokyo
Omori MH Bldg. 6-16-19, Minami-oi, Shinagawa-ku, Tokyo 140-0013
TEL: 03-5762-3511
●Daitec Tokyo business office
●Daitec Solution Tokyo business office
TEL: 03-5762-3518
Chubu
Chikaramachi Bldg., 4-85, Chikara-machi, Higashi-ku, Nagoya City 461-0018
TEL: 052-856-6633
●Daitec Chubu business office
●Daitec Solution Chubu business office
TEL: 052-856-6622
Hokuriku
Ando Bldg. 5F, 1-2-43, No-machi, Kanazawa City 921-8031
TEL: 076-226-0470
●Daitec Hokuriku business office
TEL: 076-226-0471
●Daitec Solution Hokuriku business office
Kansai
Fukaebashi MH Bldg., 4-15-6, Nagata, Jyoto-ku, Osaka City 536-0022
TEL: 06-6965-4535
●Daitec Kansai business office
TEL: 06-6965-4670
●Daitec Solution Kansai business office
Shikoku
Kotake Bldg., 3F, 4-28-30, Fukuoka-cho, Takamatsu City 760-0066
TEL: 087-826-3691
●Daitec Shikoku business office
Chugoku
6-23, Showa-cho, Naka-ku, Hiroshima City 730-0046
TEL: 082-244-8501
●Daitec Chugoku business office
●Daitec Solution Chugoku business office
TEL: 082-244-8501
Kyushu
2-3-17, Toko, Hakata-ku, Fukuoka City 812-0008
TEL: 092-451-3320
●Daitec Kyushu business office
TEL: 092-451-3320
●Daitec Solution Kyushu business office
-11-
◇ Company Profile
■ Daitec Holding Co., Ltd.
Established:
Capital:
Fiscal term:
Consolidated net sales:
July 2006
50 million Japanese yen
September 30
7,512 million Japanese yen
(Sep. 2010)
The number of employees: 20 people on April 1, 2011
(Overall employees: 251 people)
Chairman:
Makoto HORI
President:
Seiichiro HORI
■Daitec Co., Ltd.
Established:
Capital:
The number of employees:
Chairman:
President:
October 1969
50 million Japanese yen
140 people on April 1, 2011
Makoto HORI
Katsunori MORITA
■Daitec Solution Co., Ltd.
Established:
Capital:
The number of employees:
President:
October 2009
50 million Japanese yen
83 people on April 1, 2011
Toshiaki ITO
■Music Ventures Co., Ltd.
Established:
Capital:
The number of employees:
The number of staff members:
Chairman:
President:
November 2002
50 million Japanese yen
8 people on April 1, 2011
30 members
Makoto HORI
Masatoshi KUMAGAI
Take a look at Daitec Sakae Building in the distance.
-12-
◇ Corporate History
Oct. 1969: Established our company. Development and sales for
energy-saving system for SS
Jul. 1972: Established Tokyo office.
Jul. 1973: Development and sales for first-ever and full-scale
“SS-POS system” in Japan
Aug. 1974: Established Kansai office.
Jun. 1976: Established Chugoku office.
Apr. 1978: Established Kyushu office.
May 1980: Established Tohoku office.
Sep. 1980: Completed the computer online network and started the
services.
Dec. 1980: Formed an alliance with Nippon Oil Co., Ltd.
Apr. 1982: Collaborative development of SS-POS terminal with NEC
and sales
Jan. 1984: Introduction of CI. The company name was changed to
Daitec Co., Ltd.
May 1984: Completed the construction of dedicated building for computer in the headquarters (current Chikaramachi Building)
May 1986: Established Hokkaido office.
Mar 1987: Established Hokuriku office.
Nov 1987: Started the sales of CAD for construction facility
Jun 1991: Development and sales of CAD for construction facility,
“CAD We’ll”.
Sep. 1991: Established “The Hori Information and Sciences Foundation”.
Apr. 1994: Started the processing of Nisseki Sales Strategy Information System (NIS).
Jun. 1995: Registered its shares for the OTC trading at JASDAQ.
Oct. 1996: Started the sales of low-cost and general CAD “ARCDRAW”.
Oct. 1997: Started the sales of CAD for construction facility, “CAD We’ll
CAPE”.
Jul. 1999: Bought the Nagoya office building of former Yamaichi Securities.
Oct. 2001: Started the processing of Nisseki-Mitsubishi “ENEOS cash
card” system.
Oct. 2001: Started the processing of Nisseki-Mitsubishi Sales Information Strategy System (ERIX).
Nov. 2002: Opened the NAGOYA Blue Note.
Oct. 2003: Acquired the ISO9001.
Apr. 2004: Started to provide the ASP service for public “Electronic
Bidding WinSuiteASP”
Oct. 2005: Acquired the ISMS (current ISO/IEC27001)
Jun. 2006: Back to the unquote company.
Jul. 2006: Established Daitec Holding Co., Ltd. as a holding company
of our group.
Oct. 2006: Started the sales of CAD for construction facility, “CAD We’ll
Tfas”.
Sep. 2008: Renewed Daitec Sakae Building (former Yamaichi Securities Nagoya office building).
Nov. 2008: Moved our headquarters to Sakae areas (Naka-ku,
Nagoya City).
Oct. 2009: Established Daitec Solution Co., Ltd. to rebuild our group
businesses.
Sep. 2010: “The Hori Information and Sciences Foundation” was certified as a public utility foundation and changed to the name
of “The Hori Sciences and Arts Founadtion”.
Mar. 2011: Moved our headquarters back to the renewed Chikara-machi Building (Higashi-ku, Nagoya City).
-13-
2nd edition 2012.05.21
-14-