Heavy Duty, galvanised steel retaining wall posts for a professional

Heavy Duty, galvanised steel retaining wall posts
for a professional finish every time.
For 50mm timber rails
Heavy duty galvanised steel
for longer life
No fastening required, saving
time and expense
1/3 the thickness of conventional
timber retaining walls
Suitable for retaining walls
up to 600mm high
Advanced GeoSynthetic Solutions™
SUREWALL.CO.NZ
SureWall Retaining Systems provide a
simple and easy solution for creating solid
timber retaining walls and sleeper edging.
Each retaining post ensures a tight and
secure fit for each rail, with no packing or
fastening required, saving time and money.
A recess in each post allows for adjustment
to ensure you get the perfect fit every time
and to compensate for future timber movement
and shrinkage.
The SureWall™ System
SureWall™ retaining posts are heavy-duty galvanised to
provide long life and a clean professional finish.
The SureWall™ retaining wall posts are designed to be used with 50mm rails.
Firstly determine the height of your wall and choose the correct size sections from the chart below.
We recommend that SureWall™ posts be embedded halfway into the ground and concreted in
place. For example, a 500mm high wall will require a 1100mm post, this will take 4 x 150mm x
50mm sleepers (the first sleeper should be embedded 50mm into the ground)
We recommend posts to be spaced 1200-1500mm apart.
Components
HEAVY DUTY
TYPE CODE
SIZE
WALL HEIGHT
Joiner posts
Joiner
SWJ450
65 x 450mm
200-300mm
For use in straight line
retaining walls.
Joiner
SWJ750
65 x 750mm
350-375mm
Joiner SWJ1100
65 x 1100mm
500-550mm
End posts
End SWE450
65 x 450mm
200-300mm
For finishing the end of
a retaining wall.
End SWE750
65 x 750mm
350-375mm
End SWE1100
65 x 1100mm
500-550mm
Corner posts
Corner SWC450
65 x 450mm
200-300mm
for creating the perfect
90o corner.
Corner SWC750
65 x 750mm
350-375mm
Corner
SWC1100 65 x 1100mm
500-550mm
Sleeper stakes
Corner stakeSWCS450
450mm
N/A
For securing timber borders,
such as garden beds.
Stake SWS450
450mm
N/A
Corner stakes
Corner stake SWHDCS450
450mm
N/A
Flat stake SWHDS450
450mm
N/A
Left hand pegSWSPLH400
400mm
N/A
Right hand peg SWSPRH400
400mm
N/A
Left hand peg SWSPLH700
700mm
N/A
Right hand pegSWSPRH700
700mm
N/A
Support Pin 400mm
N/A
For internal and external
corners, where extra strength
is required.
Flat stakes
For joining straight runs, where
extra strength is required.
HEAVY DUTY
Left & right
hand pegs
For retaining wall
support.
Support pins
For extra support.
SWSP400
Installation
Step 1
Plan and measure the length and height of the
wall with post centres at a max of 1500mm apart
(we recommend 1200mm).
Step 2
Using a string line to ensure the retaining wall
is straight and level, concrete the posts into the
ground ensuring the required height is achieved
and that the posts line up and are vertical.
If the retaining wall steps down at any point ensure
it steps down at the same height as your rails.
Step 3
Slot in timber rails (150mm x 50mm are
recommended), ensuring the first sleeper is
embedded 50mm into the ground.
Nail down capping timber (optional). Prior to
back filling, suitable drainage is recommended,
i.e. slotted drainage pipe with Filter Sleeve laid
in a trench of drainage metal, additionally the
drainage metal can be wrapped in a Duraforce
or Filter Plus geotextile.
Step 4
Backfill up to the wall and you're done.
SureWall™ installation
DISCLAIMER: All information provided in this catalogue is correct to the best knowledge of the company and is given out in good faith. The information presented herein is in intended only as a general
guide to the use of such products and no liability is accepted by Cirtex Industries Ltd for any loss or damage however arising, which results either directly or indirectly from use of such information. Cirtex
Industries Ltd have a policy of continuous development so information and product specifications may change without notice. This presentation is subject to copyright in its entirety. The contents may not
be reproduced in any form, either in whole or in part, without written permission from Cirtex Industries Ltd. While every effort has been made to ensure the accuracy of the information in this presentation,
Cirtex Industries Ltd assumes no responsibility for errors or omissions or for any consequences of reliance on this presentation. © Copyright 2013 all rights reserved
Advanced GeoSynthetic Solutions™
SUREWALL.CO.NZ