Boiling water ready to drink in 80 seconds

So simple to use:
The first bottle water cooler
in the world
 Boil fresh tap water and  Turn the cooling
 Turn the screwed unit
measure out 210 ml
element 180°, put it on
180° again and put it
with the break-proof
the threaded neck of
directly over the neck
measuring cup.
the measuring cup and
of the baby bottle. Hot
water runs automatically
screw them together so
through the cooling
nothing drips.
coil which is surrounded by the cooling
water and cools down
the boiling water.
• works without power
• fits on all baby bottles
• boiling water ready to drink in
80 seconds
Nürnberg Gummi
Babyartikel GmbH & Co. KG
Breitenloher Weg 6
D-91166 Georgensgmünd
Tel.: +49 (0) 91 72/69 19-0
Fax: +49 (0) 91 72/69 19-11
E-Mail: info@nip-babyartikel.de
www.nip-babyartikel.de
Product video Scan & Watch
86300-00-121 Rev. 17302
w
e
el.d
k
i
t
ar
aby
ip - b
n
.
w
w
Boiling water ready
to drink in 80 seconds
Cool Twister – Bottle water cooler
Food preparation in a jiffy
When baby is hungry, it’s needed to move very,
very fast. But germ and bacteria formation means
that drinking water needs to be boiled first, before
it can be cooled to the recommended drinking
temperature for preparing a bottle. This takes its
toll on both time and nerves.
Depending on the specific recommendations of
the follow-on milk or formula manufacturer,
powder should only be added to water once it
has cooled to 40, 50, 60 or 70°C. If the temperature
falls below 40°C, the powder will not dissolve
properly and lumps will form. On the other hand,
exceeding the recommended temperature
destroys important nutrients such as probiotic
cultures.
The Cool Twister provides the solution. It is the first
bottle water cooler in the world to cool boiling
water to drinking temperature in only 80 seconds!

100°C


without g
without p erms,
ower


 Measuring cup made of break-proof plastic for
210 ml boiling water
 Sturdy cooling element made of plastic with water
tank for cold water, cooling coil and filling level
indicator
 Cooling coil made of high-quality aluminium is
surrounded by the cooling water and cools down
the boiling water according to the simple principle
of heat exchange
 Non-drip screw cap can be opened and closed very
easily with the base to fill and empty the cooling
water
 Hygienic cover seals unit tight and germfree, in the
refrigerator or on the go
70°C
60°C
50°C
 Base with integrated star handle on the bottom – for
easy opening and closing of the sealing screw
rat
e
p
m
e
t
exact
ure

40°C
Recommended by
midwives
0BPA