Buz® Laundry Strong L 831

Buz® Laundry Strong L 831
Liquid detergent booster
Fields of application
Product advantages/properties
Detergent booster for commercial use.
Optimum dirt removal capacity due to special
chelating agents.
For the following types of fabric:
cotton, polyester, microfibre, viscose, polyamide,
polypropylene.
Clearly prevents detached dirt building up again on
the fibres.
Washing temperature: 30°C to 95°C.
Improves the dirt holding capacity.
All water hardness ranges.
Special protection against greying.
Technical data
ph value
13 - 14
Product colour
colourless to yellowish
Packing drum sizes/unit
20 litre canister
BUZIL-WERK Wagner GmbH & Co. KG . Fraunhoferstraße 17 . D-87700 Memmingen
T +49(0)8331/930-6 . F +49(0)8331/930-880 . E info@buzil.de . www.buzil.com
Buz® Laundry Soft L 831
Liquid detergent booster
Application and dosage
Complementary products
For manual and automatic dosing
Buz® Laundry Strong L 831 is added to the main
wash in the recommended dosage shown below
Buz® Laundry Compact L 810
Buz® Laundry Enz 3 L 820
Recommended dosage
5 ml – 20 ml/kg dry laundry
Precise amount depends on the water hardness
and level of soiling.
Warning and safety precautions according to EC
guidelines
C-Caustic.
R 34
S2
S 26
Causes burns.
Keep out of the reach of children.
In case of contact with eyes, rinse immediately
with plenty of water and seek medical advise.
S 28
In case of contact with skin, wash immediately
with plenty of water.
S 36/37 Wear suitable protective clothing, gloves and
39
eye/face protection.
Import information
S 45
In case of accident or if you feel unwell, seek
medical advice immediately (show the lable where
possible)
For further safety precautions, please refer to the Material
Data Sheet for Buz® Laundry Strong L 831 at
www.buzil.com.
Article number:
L831-0020
The data in our product information sheets are based on our experience and careful investigations, and correspond to our present state of knowledge. We are, however, not able to examine and influence in detail the
varying conditions for usage and materials, and those at premises where products are to be used. For this reason, we can only provide general information on usage. The quality of the work depends on expert assessment
of the premises where products are to be used and how they are in fact employed by the user. In the case of doubt, the latter is obliged at all times to test the compatibility of the material to be treated with the Buzil
product on an inconspicuous area or to obtain relevant advice on application technology.
Liability for incomplete or incorrect data in our product information sheets shall only be assumed in cases of negligence caused by gross negligence or intent; any claims arising from the Product Liability Act shall
remain unaffected. All previous product information shall lose its validity through the above listed product information.
Version/Printing number TDL831/3/14
BUZIL-Anwendungstechnik . Fraunhoferstraße 17 . D-87700 Memmingen
T +49(0)8331/930-730 . F +49(0)8331/930-883 . E awt@buzil.de