DVC Series Programmable Controllers

High Country Tek Inc.
High Country Tek Inc.
Markets and Segments
Controllers and Applications
Module Description
New system controller with extended I/O
DVC 7
Master system controller module
DVC 10
Digital system 20+20 x I/O expansion module
DVC 21
Digital system 40 x I/O expansion module
DVC 22
Digital Output expansion module
DVC 41
Universal I/O module
DVC 50
Smart LCD Display
DVC 61
5mB data storage module
DVC 70
J1939 CAN gateway and bridge module
DVC 80
Typical applications for DVC modules and systems:-
Mobile - Industrial - Marine
Generator control and supervision
♦
Mining
♦
Refuse
Conveyor speed, position and force control
♦
Agriculture
♦
Construction
♦
Off-Road
♦
Heavy Equipment
Refuse industry i.e. Truck automation and pack control
♦
Re-cycling
♦
Integrated OEM
Machine / application Speed & Position Control
♦
Forestry
♦
Military
Advanced hydraulic fan drive with brake charge/power steering e.t.c.
♦
Remote Control
♦
Special Use
Agricultural sprayer and Spreader Control
♦
Demolition
♦
Power Generation
♦
Oil Field
♦
Emission Control
Open Loop Valve, Pump, Motor Control ( ideal for manifold systems )
Anti stall / HP limiting
Vehicle ( manned or unmanned ) Steering Control
Skid- Steer & Speed Control
For the latest company and product information, visit us at:
www.highcountrytek.com
Mobile and Automotive Traction Control
Hydrostatic Transmission Control
The High Country Tek, extensive
range of DVC modules represents
the industries most physically robust,
field proven controller with
intelligence, flexibility and expandability
where it is needed most - your system.
These smart modules have visible
diagnostic indicators, CAN communications,
are simple to program with the HCT Intella™ software and easy to apply.
For environmental stability, they are fully encapsulated for protection and
very cost effective.
The DVC 10 master module is capable of
commanding multiple module systems that can grow to meet even the
most demanding and complex of requirements. There are modules and
peripheral equipment available that will allow you to design the system
you want and optimize your project.
DVC-G.pub/GG/08
DVC™ Series Controllers
HCT Model
Auto Leveling / Auto Grading / Load Monitoring / Limiting
High Country Tek, Inc. is located in Nevada City, CA.
midway between Sacramento and Reno, Nevada. This is
the center for our customer support department as well as
being the main location for our product design, R&D and
manufacturing. We have a team of industry seasoned
electro-hydraulic regional Field Application Engineers
( FAE’s ) covering the United States working with our
customers to realize operational solutions in a timely
manner. We offer training programs on our products,
welcome customers feedback on our performance and we
look forward to hopefully working with you on your next
project.
High Country Tek Inc.
Copyright © High Country Tek, Inc.—2008
High Country Tek, Inc. designs, builds and markets
the DVC series modules as the company’s flagship
solution technology. The controllers represent a fully
flexible and expandable hardware system planned
from the ground up to offer a complete user friendly
solution when used with the patented Intella™
software allowing easy system optimization.
Combining the easy programming with
several innovative and unique
hardware benefits,
makes the DVC
series stand
out from
the
crowd,
especially
to the
experienced
programmer,
seasoned
electro-hydraulic
user or for that
special application that
just requires
robust reliability under extreme environmental duress.
The ability to interface with standard analog signals,
HCT-CAN or J1939 data makes this family of field
proven modules very valuable to a system designer as
a control tool that is flexible enough to grow as
needed and meet demands and complexity by
allowing addition of multiple expansion modules until it
precisely fits your project I/O needs.
Customer Service & Technical support:
208 Gold Flat Court
Nevada City, CA 95959
Phone: (1) 530 265 3236 Fax: (1) 530 265 3275
High Country Tek Inc.
DVC™ Series Controllers
•
Fully programmable & expandable logic controllers
•
Built to operate in harsh/hostile environments.
•
Flame retardant - solid fill Encapsulated protection
•
Designed to meet IP68 ( NEMA 6P ) or higher
•
HCT-CAN Bus networking and J1939 protocol
•
Remote control and MMI options available
•
Power supply reverse polarity and transient protection
•
Input and Output short circuit protection
•
On-board visual diagnostic LED indicators
•
Separate RS-232 communications port
•
Compact design (5.6” L X 4.0” W X 1.65” D)
DVC10:
Master Controller:
The main control module for all
DVC series units.
This fully potted, extremely
robust controller is fully user
programmable with enough
I/O to allow stand-alone
operation or it can be the
master controller for a large
HCT-CAN Bus system with
the addition of up to 16 x
additional DVC series
expansion modules. The unit as standard,
has 14 inputs ( 8 digital inputs, 3 analog inputs and 3
universal inputs ), and 9 outputs ( 3 Dual PWM rivers to 3
Amps, 6 on/off drivers to 3 Amps ). Integrated and visible
diagnostic/prognostic LED indicators and 10 - 32 VDC supply
with polarity and transient protection makes this a very
powerful tool for mobile solutions.
The Intella™ Software Suite is a
powerful programming tool written by
HCT, that allows a project or
applications engineer to easily create,
enhance, change, modify and optimize
user applications which run on the DVC
series of controllers.
High Country Tek Inc.
High Country Tek Inc.
DVC™ Expansion Modules
DVC21: 20 x sinking & 20 x sourcing
inputs:
HCT-CAN protocol and separate RS232 port for
PC connection. All inputs have configurable
de-bounce time and Hi/Lo activation. Visible
diagnostic/prognostic LED indicators and
10 - 32 VDC supply with polarity and transient
protection.
DVC22: 40 x current sinking inputs:
HCT-CAN communication with separate
RS232 port for PC connection. All inputs
have programmable de-bounce times and
Hi/Lo activation for easy system integration.
Visible diagnostic/prognostic LED indicators
and 10 - 32 VDC supply with polarity and
transient protection.
DVC41: 12 x High Current Outputs:
HCT-CAN communications control the current
sourcing protected outputs that have open and
short circuit detection. A separate RS232 port is
used for easy PC connection. Visible,
programmable diagnostic/prognostic LED
indicators and 10 - 32 VDC supply with polarity
and transient protection.
DVC50: Universal I/O module:
HCT-CAN communications, multiple digital and
pulse inputs combined with 6 high sided and 3
PWM outputs make this a very versatile
addition to the system. Visible diagnostic/
prognostic LED indicators and 10 - 32 VDC
supply with polarity and transient protection.
DVC61: digital display unit.
This smart, LCD 4 x 20 Character, backlit
display has
extended temperature operation and a trans-reflective
screen for sunlight viewing.
The unit interfaces via the HCT-CAN bus or the RS232 serial
interface and is housed in a sealed metallic enclosure
specifically designed for harsh environment. There are up to 10
digital inputs available to the user with the unit operating from
10 - 32 VDC supply with polarity and transient protection.
DVC™ Expansion Modules
DVC70: Memory expansion module:
With an on-board real time clock, the module
is Intended for event and trend tracking, The
unit has 5Mb of non-volatile FLASH memory
available for storage. Data is received via
the HCT-CAN network and downloaded to a
PC via a separate RS232 port. 10 - 32 VDC
supply with polarity and transient protection.
DVC80: J1939 data bridge:
This unit is the link between J1939 bus
systems and the DVC series controllers.
The module receives, filters and
re-transmits messages to allow full
system control. A separate RS232 port
allows connection to a PC. 10 - 32 VDC
supply with polarity and transient
protection.
DVC7: Limited Expansion Master Controller:
Very cost effective control module using the
Intella™ Software Suite. The DVC7
communicates with the DVC61 via
HCT-CAN or RS232 and has J1939
capability. 8 inputs ( 4 digital inputs, 2
analog and 2 universal inputs ) and 8
outputs ( 2 Dual PWM drivers up to 3 Amps
ea. 6 on/off drivers to 3 Amps ea, ) 10 - 32 VDC
supply with polarity and transient protection.
Contact Us
High Country Tek, Inc. can work with you to produce a
solution optimized to meet your requirements. This can
be as simple as a custom PC user interface up to a fully
pre-programmed unit.
For product orders & enquiries
E-mail us at:-
info@highcountrytek.com