Plasma Cutter

Inverter Air Plasma Cutting System
Plasma
Cutter
APC-15CA
FEATURES
Compressor is not built-in
● Excellent Performance
at AC 120V
(maximum 19A).
● Ultra small and light
design only for 18.1lb
(8.2kg).
● Duty cycle for 40% at
maximum output.
・The safety function equipped in the
torch prevents electric shock.
・The protecting function loaded for
the use over its duty cycle ensures
no damage of the equipment
caused by overheating.
・The capability for excellent cutting
is:
Material
Thickness of board
Mild Steel
0.16" (4.0mm)
Stainless Steel 0.12" (3.0mm)
Aluminum
0.08" (2.0mm)
Brass
0.06" (1.5mm)
Cupper
0.04" (1.0mm)
・This enables you to cut mild steel
board of thickness up to 0.13"
(3.2mm) in good condition even
from 120V/15A outlet.
・When using a compressor, the
minimum amount of necessary air
emission is 25L/min. (0.2∼0.3MPa).
A new section brought from SUZUKID!
SPADA, an Italian meaning "Sword",
realizes free and universal cutting and clipping in safety.
SUZUKID's technology of welding at 115V-120V
will change the cutting scene at 115V-120V as well
Specifications
Product Name Spada
Model Number APC-15CA
Rated Input Voltage Single Phase 120V
STAR ELECTRIC MFG CO.,LTD.
- A New Spark to the Welding Scene 17-15, Minami-Fujisawa, Fujisawa-City
Kanagawa-Pref. 251-0055, Japan
TEL: 81-466-27-2666 FAX: 81-466-27-1055
URL: http://www.suzukid.co.jp
E-mail: info-us@suzukid.co.jp
Standard Accessories
1. Ground clamp
(cord length 9.8ft connected to the unit)
2. Torch
Rated Output Current DC 13.5A
Rated Frequency 60Hz
Rated Duty Cycle 40%
3. Power supply cord
Rated Input Current AC 19A
Rated Input 2.28kVA
4. 2P・120V adaptor
Thickness of Board Mild steel: 0.02"∼0.24"
(for cutting off), 0.02"∼
0.16" (for cutting in good
condition)
Air Pressure 0.2∼0.3MPa
(cord length 13.1ft connected to the unit)
(cord length 6.6ft connected to the unit)
5. Air regulator with drain
Optional Accessories
1. P-771 Electrode (5 pcs set)
2. P-772 Tip (5 pcs set)
3. P-773 Distributor (1 piece)
Dimension 5.94" (W) x 14.17" (L) x
9.96" (H)
4. P-774 Shield Cap (1 piece)
Net Weight 18.1lb.
5. P-775 Air regulator with drain
6. P-776 Compass set for circular cutting