Shiftworks® products are made in the USA

Transcription

Shiftworks® products are made in the USA
Shiftworks ® products are made in the USA
NEW PRODUCTS
Neutral Safety & Back-up Switch Re-Location
Conversion 3-speed and 4-speed Automatics
1969-81 Pontiacs and 1973-81 Chevy’s
y
Does your shifter look like this?
?
GM used a rod linkage from the transmission
to operate the neutral safety and back-up
switch located on the column for many of its
center console equipped cars. Headers and
OverDrives and many owners have in many
cases lost or caused to be lost this valuable
safety item. We know, we got the calls.
So finally here is a solution. You can now
put it on the shifter where it belongs.
For all TH350 and TH400
#SW652
$49.50
Use Column switch for 1968 Firebird.
Switch not included.
For all OverDrive applications using SHIFTWORKS® shifter conversion
#SW653
$94.50
Switch IS included.
2
www.shiftworks.com
Dust Boots for SHIFTWORKS® Trans-stormer Shifter.
These boots will help keep dust and dirt away from the shifter and out of your car.
Available for both the 67 Camaro style and the Universal shifter bodies.
Molded ABS Plastic. Universal on Left and 67 Camaro style on Right.
#SW280-155
Universal Body
$24.50
#SW280-251
Camaro Body
$24.50
4L60E, 4L65E, 4L70E & 4L80E
Our 4LX fix-it kits resolve rod linkage conflicts with the electric neutral safety/backup
light switch located on the exterior of the transmission and for cable applications
straighten out the cable alignment if the transmission has the long Range-Select lever.
4LE Rod Linkage fix-it
4LE-C Cable fix-it kit
$18.50
$18.50
Use with the non-E overdrive conversion for your car.
4LE Rod Linkage fix-it
4LE-C Cable fix-it kit
www.shiftworks.com
3
1964-67 CHEVELLE
Powerglide Shif
Shifter Conversion Kit
The purpose of this kit
k is to allow the use of the 1964-67
factory installed cons
console shifter when the Powerglide
transmission is re
replaced with a newer 3-speed
(TH350 or TH400) or 4-speed overdrive
(TH700-R4, 4L60 or TH200-4R)
transmission.
This kit eliminates the rod linkage
cable #K100. Kit includes cable.
and replaces it our ca
1964-65 CHEVELLE
#SC2031-C TH350, TH400
#SC2041-C TH700-R4,
TH200-4R, or 4L60
As Installed
$175.00
$175.00
1966-67 CHEVELLE
#SC2031-C
#SC2032-C TH350, TH400
#SC2042-C TH700-R4,
TH200-4R, or 4L60
$175.00
$175.00
1964-67 CHEVELLE
#S500*
1965-67 Backup and
Safety Switch
$52.50
*Recommended for all conversions.
#S502
As Installed
#SC2042-C
#4160
#S501
#S530
#S531
1966-67 Console
Lens Bezel
Button
Button Spring
TH350 Kickdown Cable
TH350 Kickdown
Bracket (Small Block)
$75.00
$12.50
$4.50
$44.50
$12.50
1964-67 POWERGLIDE PARTS
#S502
4
#S500
www.shiftworks.com
#SW421
#SW419
Rod Linkage
Trans. Select Lever
$41.00
$42.00
1964 IMPALA
Powerglide Shifter
Conversion Kit
The purpose of this kit is to allow
the use of the 1964 factory installed
console shifter when the Powerglide
transmission is replaced with a
newer 3-speed (TH350 or TH400) or
4-speed overdrive (TH700-R4, 4L60
or TH200-4R) transmission. This kit
eliminates the rod linkage and replaces it with our
cable #K100. Kit includes cable.
1964 IMPALA
#SC2051-C TH350, TH400
#SC2061-C TH700-R4,
TH200-4R, or 4L60
#S500* Back-Up & Safety Switch
$175.00
$175.00
$52.50
*Recommended for all conversions.
#S530
#S531
#4160
#S501
TH350 Kickdown Cable
$44.50
Kickdown Bracket (Small Block) $12.50
Button
$12.50
Button Spring
$4.50
#SC2051-C
#S500
#SC2061-C
#S530
#S531
#S501
#4160
www.shiftworks.com
5
1965-67 NOVA & IMPALA
Powerglide Shifter Conversion Kit
Use your factory-installed console shifter when the Powerglide
transmission is replaced with a newer 3-speed (TH350 or
TH400) or 4-speed overdrive (TH700-R4, TH200 4R, or 4L60)
transmission. This kit retains the rod linkage.
#S1031
As Installed
1965-67 NOVA
#S1031
#S1041
#4160
#S501
TH350, TH400
TH700-R4,
TH200-4R, or 4L60
Shifter Release Button
Release/Spring Button
$57.75
$57.75
$12.50
$4.50
1965 IMPALA
#S1042
As Installed
#S103
#2441
#S1043
TH350, TH400
3-Speed Lens
TH700-R4,
TH200-4R, or 4L60
$47.25
$49.50
$57.75
1966-67 IMPALA
#S103
#2592
#S1042
TH350, TH400
3-Speed Lens
TH700-R4,
TH200-4R, or 4L60
$47.25
$39.50
$57.75
1965-67 NEUTRAL SAFETY AND
BACK-UP SWITCH
#2441
#2592
#S500*
$52.50
*Recommended for all conversions.
Rod Linkage
#SW423
#SW425
#SW427
#SW431
#SW404
65-67 Impala PG & TH350
65-67 Impala TH400
65-67 Nova
65-67 Nova (O.D.)
Swivel Kit
#SW425 pictured
6
www.shiftworks.com
$42.00
$58.00
$41.00
$41.00
$9.50
1967 CAMARO & FIREBIRD, 1968-72 NOVA
Shifter Conversion Kit
The purpose of this kit is to allow the use of the factory
installed automatic floor shifter when the transmission
is replaced with a newer 3-speed (TH350 or TH400) or
4-speed overdrive (TH700-R4 or TH200-4R) transmission.
This kit retains the rod linkage.
#S105A
#S105B
#SW429
#SW404
#S530
#S531
#6724
#S501
#S504
#S636
#S635
#SW442
#SW443
#SW441
#SW435
#S519
#S635
TH350, TH400
TH200-4R, TH700-R4, 4L60
67 Rod Linkage with swivel
Swivel Kit
TH350 Kickdown Cable
Kickdown Bracket (Small Block)
Shifter Release Button
Release Button Spring
Plastic (Delrin) Bushings
Flexi-Rod (inside handle)
NSS & Back-up Light Lever
Bottom Spring
Bottom Spring (cotter pin style)
Main Shaft Washers
1968-72 Nova TH Rod Linkage
Neutral Safety/Back-up Switch
$57.75
$57.75
$41.00
$9.50
$22.50
$12.50
$12.50
$4.50
$12.75
$68.50
$15.25
$4.50
$4.50
$6.50
$63.50
$38.50
#S504
#S105A
#S519
#SW435
#S636
www.shiftworks.com
7
1968-72 CHEVELLE, CAMARO, IMPALA & MONTE CARLO
3-Speed Installations
All 1968-72 factory “Horseshoe” style shifters have
a universal detent for both 2-speed and 3-speed
automatic transmissions. They also use the same
cable. However, these models do require a cable
installation kit when swapping out
a Powerglide transmission for
a TH350 or TH400, or when
installing a factory console shifter in
car originally equipped as a column shift.
NEW!! 3-Speed
Detent
Good for replacing a
worn or damaged unit
and for Reverse Valve
Bodies too.
#S640
#S150
#S151
#S152
#C351
#S640
#S64
#S
6400
3-Speed Detent
68-69 Camaro RVB Lens
68-70 Chevelle RVB Lens
71-72 Chevelle RVB Lens
$30.00
$19.50
$19.50
$19.50
1968-72 CAMARO, CHEVELLE,
IMPALA, & MONTE CARLO
Universal Kit
#C351
(All Models)
TH350, TH400
$35.00
1968 CHEVELLE,1968-69
CAMARO
#C401
#C401
#C354
TH400 GM Factory Parts
TH350
$45.00
$42.00
1969-72 CHEVELLE,
1970-72 CAMARO,
1968-72 IMPALA
#C3511
#C3511
#C402
#4582
#4584
#S530
#S531
TH350, TH400
TH400 GM Factory Parts
1968-70 3-speed Lens
1971-72 3-speed Lens
TH350 Kickdown Cable
TH350 Kickdown Bracket
(Small Block)
See Cables
8
www.shiftworks.com
$40.00
$45.00
$15.75
$15.75
$22.50
$12.50
1968-72 CHEVELLE, CAMARO, IMPALA & MONTE CARLO
3-Speed Ratchet Shift Detent
A new Thomson Performance product. This detent
will enable positive shifts from low to drive.
#DT3 Powerglide, TH350, TH400
$75.00
$75.00
#DT4* GM Overdrives
#DT3
#DT4
DT4 MUST be used with a SHIFTWORKS® overdrive
conversion kit series SC224X.
4-Speed Overdrive Kit
1968-69 CAMARO
#SC2244
TH700-R4,
TH200-4R, 4L60
#SC2244
$89.25
1970-72 CAMARO
#SC2245
TH700-R4,
TH200-4R, 4L60
$89.25
1968-72 IMPALA (No Lens)
#SC2240
TH700-R4,
TH200-4R, 4L60
68-69
$78.75
70-72
As Installed – Camaro
1968 CHEVELLE
#SC2241
TH700-R4,
TH200-4R, 4L60
$89.25
1969-70 CHEVELLE
#SC2242
TH700-R4,
TH200-4R, 4L60
$89.25
#SC2243
1971-72 CHEVELLE
#SC2243
TH700-R4,
TH200-4R, 4L60
$89.25
CABLES
#C100
#K100
#S532
Shifter Cable
(GM #3956765)
Shifter Cable
Retainer
#C100
$100.00
$74.50
$4.50
(clips cable to shifter handle)
See our video on cables:
www.shiftworks.com/video/cable.htm
RVB Lens
#S151
#K100
www.shiftworks.com
9
1968-1969 FIREBIRD & GTO
3-Speed Installations
The 1968-69 Firebird Powerglide (2-speed) shifter
can be used with the TH350 or TH400
(3-speed) transmission without modification. The
only difference in the factory shifter detent is an
additional hard stop for 2nd gear, not
present with the 2-speed detent. This stop is
unnecessary.
#C352
#C353
#C101
#C101
#K100
1968-69 Firebird TH350
1968-69 Firebird TH400
Shifter Cable (GM #498467)
Shifter Cable (GM #498467)
Shifter Cable
$36.75
$36.75
$114.75
$74.50
$74.50
#C352
1968-81 FIREBIRD, GTO, & LE MANS,
1973-81 CAMARO
4-Speed Overdrive Kit
The purpose of this kit is to allow the use of
the factory installed shifter when installing a
newer overdrive transmission. The kit includes
a new laser cut and hardened detent, and all
hardware and brackets are included to allow
use of the original cable.
1973-78 CAMARO
#SC2261
TH700-R4, TH200-4R, or 4L60
$89.25
1968 FIREBIRD
#2262-8
#SC2262
TH700-R4, TH200-4R, or 4L60
$89.25
1979-81 CAMARO, 1969-81 FIREBIRD,
1968-75 GTO & LE MANS
As Installed
10
As Installed
73-78 Camaro
www.shiftworks.com
#SC2262
TH700-R4, TH200-4R, or 4L60
#C101
#K100
Shifter Cable (GM #498467)
Shifter Cable
$89.25
$114.75
$74.50
1965-67 CORVETTE
Shifter Conversion Kit
The purpose of this kit is to allow the use of the factory
installed automatic shifter when the transmission is
replaced with a newer 3-speed (TH350 or TH400) or
4-speed overdrive (TH700-R4, 4L60, or TH200-4R)
transmission. The kit retains the rod linkage.
#SC2405
1965-67
$84.50
A new laser cut, die stamped aluminum console insert
with black anodized letters for the above kit.
#S141
#S142
#S141
#S142
Console Insert (TH350/400)
Console Insert (Overdrive)
$44.50
$44.50
#SC2405
1968-81 CORVETTE
Shifter Conversion Kit
This kit enables the use of the factory installed shifter
when installing a newer overdrive transmission, such as
the TH200-4R, TH700-R4, and the 4L60. The kit includes
a new laser cut and hardened detent, and all hardware
and brackets are included to allow use of the original
cable. Also included is an overdrive console lens
adapter.
1968-71
1972-76
1977-81
$94.50
$94.50
$94.50
GM Cables
#C103
1968-76
#C102
1977-81
$90.00
$120.00
#SC2401
#SC2402
#SC2403
Lens Indicator Adapters
L to R: 68-71, 72-76, 77-81
www.shiftworks.com
11
1964-65 GTO & LE MANS
Use your factory-installed
facttory2-speed shifter to retain the original
replacing the Powerglide transmission with a newer
appearance when
w
3-speed (TH350
(TH3
350 or TH400) or 4-speed overdrive (TH700-R4, TH200This kit eliminates the rod linkage and
4R, or 4L60) transmission.
tran
replaces it with
with a cable. Kits include new cable.
#SC2152 TH350 & TH400
#SC2162 TH700-R4, TH200-4R
or 4L60
$175.00
$175.00
As Installed
#SC2152
1966-67
1966
67 GTO & LE MANS
This kit allows the use of the factory 2-speed
shifter when
w
converting to a fully functional
3-speed
shifter with installation of a new
3
TH350, TH400, TH200-4R, TH700-R4,
or 4L60 transmission. Kits require use
of our cable #K100. (sold separately).
#SC2101
TH350
$104.00
#SC2102
TH400
$104.00
#SC2121
TH700-R4,
TH200-4R, or 4L60
$104.00
#K100
#SC2101
12
www.shiftworks.com
Shifter Cable
$74.50
DUAL GATE SHIFTERS
Use the original His & Hers Shifter with a new
w
3-speed (TH350 or TH400) or 4-speed
overdrive (TH700-R4, TH200-4R, or 4L60)
transmission. Kits include all necessary
hardware for installation.
1967-68 GTO
#C362
#C363
#C361
#C101
#K100
TH400
TH350
TH700-R4,
TH200-4R, or 4L60
Shifter Cable
(GM #498467)
Shifter Cable
$36.75
$36.75
$42.00
$114.75
$74.50
1970-72 442
#C371
TH700-R4,
TH200-R4, or 4L60
(includes cable)
$110.00
The overdrive
conversion puts
overdrive in a
neutral position.
Low, second,
and drive are
normally located.
#C361
442
#C371
www.shiftworks.com
13
1967-72 CUTLASS
Shifter Co
Conversion Kit
Use your facto
factory-installed automatic floor shifter with a
newer 3-speed (TH350 or TH400) or a newer 4-speed
(TH700-R4, TH
TH200-4R, or 4L60) transmission.
1967-69 CUTLASS
#SC2302
TH350
& TH400
$150.00
1967-72 CUTLASS
#SC2312
#SC2312
TH700-R4,
TH200-4R,
or 4L60
$150.00
#SC2302
1964-66 CUTLASS
Shifter Conver
Conversion Kit
The purpose of this kit is to allow the use
shifte and console when the
of the factory shifter
2-speed transmission is
replaced with a TH350
or TH400 3-speed or
a newer 4-speed (TH700-R4, TH200-4R, or
4L60) transmission. This kit eliminates the Rod
Linkage and replaces it with a cable.
1965-66 CUTLASS
#SC2320
#SC2322
#SC2322
14
www.shiftworks.com
TH350 & TH400
TH700-R4,
TH200-4R
or 4L60
$135.00
$135.00
1968-72 BUICK
4-Speed Overdrive Kit
Use your factory-installed automatic
tomatic floor shifter with a
newer 4-speed (TH700-R4, TH200-4R, or 4L60)
transmission. The conversionn includes a new laser
cut and hardened detent for proper stops and gear
ansmission shift lever,
selection, a new matching transmission
ns indicator (68-69 only),
cable pan bracket, console lens
dware, and instructions.
new cable, all necessary hardware,
1968-72 BUICK
#SC2072
TH700-R4,
60 $150.00
TH200-4R, or 4L60
As Installed
(’68-’69)
#SC2072
1964-66
1964
66 BUICK
4-Speed Overdrive Kit
Use your factory-installed automatic floor
shifter with a newer 3-speed (TH350,
TH400) or 4-speed (TH700-R-4, TH200-4R
or 4L60) transmission. The conversion includes a new laser cut and hardened
detent for proper stops and gear selection, a new matching transmission shift
lever, cable pan bracket, new cable, all necessary hardware, and instructions.
#SC2082 TH350, TH400
$150.00
#SC2092 TH200-4R, TH700-R4 or 4L60
$150.00
#SC2322
#SC2082
#SC2092
www.shiftworks.com
15
COLUMN SHIFT CONVERSIONS
Transmission Shift Arm Connection Kit
For column shifters TH350, TH400, TH200-4R, TH700R4, 4L60, 4L80.
The Kugel Komponents Kit connects the column or
floor shifter to most GM transmissions. It also allows
for gear pointer alignment. A splined adapter button
allows the arm to be positioned at any angle. A slot
positions to pivot joint for longer or shorter sweep and
pointer alignment.
The rod assembly is 17” – 23 1/2” pivot to pivot.
#KK02
Column Shift Linkage
$45.00
#KK02
Do you have a: 4L60E, 4L70E, or
4L80E with the neutral safety
switch on the outside?
Then you will need out 4LE Fix it kit. This
allows you to connect the linkage and not
have any conflicts with the switch.
$18.50
#4LE Kit
#4LE KIT
16
www.shiftworks.com
COLUMN SHIFT CONVERSIONS
Column Lens Indicators
1962-65 NOVA, 1961-64 IMPALA,
1964-65 CHEVELLE & GTO/TEMPEST
#S138 & S139
#S138
#S139
Indicator (TH)
Indicator (OD)
$19.50
$19.50
1967 NOVA & 1967-68 CAMARO
#S143
#S144
#S143 & S144
Indicator (TH)
Indicator (OD)
$19.50
$19.50
1966 NOVA
#S153
#S154
Indicator TH
Indicator OD
#S153
$19.50
$19.50
#S154
1968-74 NOVA
#S155
#S156
Indicator TH
Indicator OD
$19.50
$19.50
#S153 AS
INSTALLED
#S155
#S156
1968 & 1969 CHEVELLE
#S145
#S146
#S147
#S148
These cleverly designed adaptors fit over
the existing raised letter indicators for a
permanent and factory appearing solution
at an affordable cost.
68 Chevelle TH 3-speed
$19.50
68 Chevelle OD 4-speed
$19.50
69 Chevelle TH 3-speed
$19.50
69 Chevelle OD 4-speed
$19.50
#S146 AS
INSTALLED
1970-1972 MALIBU SWEEP DASH
#S157
Indicator OD
$19.50
www.shiftworks.com
17
1966-67 CHEVELLE & NOVA SS GAUGE CONVERSIONS
Super Sport Gauge Conversion
This new SHIFTWORKS® conversion
kit will allow anyone with the standard
Chevelle or Nova in-dash gauges to
convert to the Super Sport style gauge
package.
#S505
Use the voltmeter with one-wire
alternators and non-GM wiring.
These gauges are designed to fit into
the EXISTING openings in the back of the dash.
They include the Temperature sensing device and
the mechanical Oil Pressure line and fittings. An
ammeter is standard, as was used by GM.
1966-67 CHEVELLE
#S505
SS Gauges Kit with Ammeter $205.00
#S505-V SS Gauges Kit with Voltmeter $205.00
#S505-ADP Adaptors For Shiftworks®
Gauges In Factory SS Dash
$25.00
1966-67 NOVA
#S507-V
SS Gauges Kit with Voltmeter $205.00
HIGH OIL PRESSURE?
#S507-V
18
www.shiftworks.com
Midrange for the HOP series is 60 pounds, versus the
normal 30 pounds oil pressure gauge. The upper scale
of the HOP series oil pressure gauge is 100+ pounds.
#S505-HOP
$215.00
#S505-VHOP
$215.00
#S507-HOP
$215.00
CHEVELLE IN-DASH TACHOMETER CONVERSIONS
In-Dash Tachometer
SHIFTWORKS® is now offering In-Dash Tachometer conversions.
Replaces the clock with a 7000 RPM
TACH. This is a Two-For. Get rid
of that “Tachy” steering column
appendage AND that broken clock.
All SHIFTWORKS® In-Dash
Tachs are engineered to fit
into EXISTING dash openings and
are designed with a factory look.
#S510-1 Installed
1964-65 CHEVELLE
#S510-1
1964-65 Chevelle
In-Dash Tachometer
$139.50
1968 CHEVELLE
#S512
1968 Chevelle
In-Dash Tachometer
$139.50
#S510-1
#S512
#S512 Installed
1968 CHEVELLE IN-DASH
TACHOMETER AND GAUGES
#S508-VT Gauges Conversion with Tachometer
Replaces Idiot Lights
Before
$325.00
After
www.shiftworks.com
19
CHEVELLE IN-DASH TACHOMETER CONVERSIONS
In-Dash Tachometer
SHIFTWORKS® is now offering In-Dash
Tachometer conversions. Replaces the
clock with a 7000 RPM TACH. This is a
Two-For. Get rid of that “Tachy” steering
column appendage AND that broken clock.
#S513 Installed
All SHIFTWORKS® In-Dash Tachs are engineered to fit
into EXISTING dash openings and are designed with a
factory look.
1969 CHEVELLE
#S513
#S513
1969 Chevelle
In-Dash Tachometer
$134.50
#S514 Installed
1970-72 CHEVELLE SS
1970 Chevelle
In-Dash Tachometer
#S514-W 1971-72 Chevelle
In-Dash Tachometer
#S514-G
$134.50
$134.50
1970-72 CHEVELLE MALIBU
1970 Malibu
In-Dash Tachometer
#S518-W 1971-72 Malibu
In-Dash Tachometer
#S518-G
#S514-W
$134.50
$134.50
#S518-G
#S518 Installed
20
www.shiftworks.com
NOVA IN-DASH TACHOMETER CONVERSIONS
#S515 Installed
1963-65 NOVA
#S515
1963-65 Nova
In-Dash Tachometer
$139.50
1968-72 NOVA
#S517-G
#S517-W
1968-70 Nova
In-Dash Tachometer
1971-72 Nova
In-Dash Tachometer
$134.50
$134.50
#S515
#S517 Installed
#S517
www.shiftworks.com
21
TRANS-STORMER
TH350, TH400, TH200-4R, TH700-R4, 4L60, 4L65, 4L80
Trans-Stormer
The Trans-stormer shifter is a universal design suitable
for many applications and specific to none. It is
available as either a rod linkage or cable shifter, with a
full neutral safety/back-up light switch, and with several
knob and handle options. Same shifter for all TH350,
TH400, TH200-4R, TH700-R4, 4L60, 4L65, 4L80.
1963-64 NOVA & 1963 IMPALA
Installed in early Nova/Impala console.
SW230-R22
SW230-R23
10 inch w/white knob
10 inch w/black knob
$285.00
$285.00
1964 & EARLIER CORVETTE
Complete with Neutral Safety/Back-Up light switch,
mounting system, and rod linkage connection kit.
Smoothie Knob
SW230-R24 6 inch & 1/2 inch diameter w/white knob $285.00
SW230-R23 6 inch & 1/2 inch diameter w/black knob $285.00
SW230-R22
1965-67 CORVETTE
Complete with Neutral Safety/Back-Up light switch,
mounting system, and rod linkage connection kit.
Button Top Knob
New body coming to replicate Original PowerGlide
Shifter
$350.00
SW280-R05
1965-67
6 inch
$275.00
SW230-R23
1965-67 CORVETTE CONSOLE INSERTS
S141
S142
S141
SW280-R05
22
www.shiftworks.com
TH- 3 speed
OD- 4 speed
$44.50
$44.50
S142
PowerGlide Shifter
All Trans-Stormer Shifters can now be ordered for the PowerGlide. Simply
add a P to the part number prefix. For example, the SW230-R22 becomes a
SW230P-R22. Price is the same. However, some PowerGlide transmissions
may require an additional Range Selector Shaft and Lever available
seperately. Both cable and rod linkage versions available.
PowerGlide Rod Linkage
PG-R
PG-C
PowerGlide Cable Linkage
Rod Linkage conversion
Cable Linkage conversion
$95.00
$125.00
Conversions include range select shaft and kickdown shaft that must be
installed into the transmission. Cables sold seperately.
1967 CAMARO & FIREBIRD & 1968-72 NOVA
Shifter for PowerGlide
Complete with rod linkage, optional
off sets and Neutral safety/backup
light switch. Uses pre-existing PG
range select lever at transmission.
Shiftworks will be offering parts to
connect to any PowerGlide.
SW280P-RCT
$325.00
www.shiftworks.com
23
Shifter for all Turbohydramatics TH3650, TH400, TH200-4R,
TH700-R4, 4L60, 4L80
1967 CAMARO & FIREBIRD, 1968-72 NOVA
Complete with all linkage, optional off sets, mounting system, and Neutral safety/
backup light switch.
SW280-RCT
$350.00
1964-67 CHEVELLE & IMPALA, 1965-67 NOVA
SW280-CT7
7 inch T-Handle Shifter w/cable
$350.00
New Shifter is complete witih all cable linkage, shiftworks cable, neutral safety switch,
and T-handle with Trim-Parts black button.
24
www.shiftworks.com
Curved T-Handle
Straight T-Handle
Button Top Knob
Rod Linkage Kit
Smoothie Knob
Cable Kit
Shifters are available as either Rod Linkage or Cable with choice of knob styles.
The SW280 has a 5/8’’ diameter handle and is available in 6, 7 or 8 inch length.
The SW230 has a 1/2” diameter handle and is available in 6 or 10 inch length.
SW280-R
Rod Linkage
$275.00
SW280-C
Cable
$275.00 *Cable purchased seperately
SW230-R
SW230-C
Rod Linkage
Cable
$285.00
$285.00 *Cable purchased seperately
T-handle: Add $75.00 for Curved, and $20.00 for Straight.
www.shiftworks.com
25
TRANS-STORMER
CONSOLE HOUSING, CONSOLE MOUNT,
INDICATOR & SLIDER
Mounts directly to shifter and can be used with or without the
Shfitworks console housing. Great for custom applications.
NOTE: These indicators are for STANDARD GATE. They will not line up for the short gate.
SW280-014A
SW280-014B
3-speed indicator
4-speed OD indicator
$44.50
$44.50
CONSOLE HOUSING
Housing is vacuum molded and about 5 inches high x 16 inches long
x 6 inches wide with a 1/2 inch deep recess. It can be cut down as
required to fit.
SW280-CH
$38.50
26
www.shiftworks.com
Rod Linkage Shifter
Cable Linkage Shifter
www.shiftworks.com
27
IN-DASH GAUGE CONVERSIONS
Shiftworks®
200 Air Park Drive
Suite 10
Rochester, NY 14624
Ph: (585) 436-0139
Fax: (585) 436-0143

Similar documents

Shiftworks® products are made in the USA

Shiftworks® products are made in the USA 67 Rod Linkage with swivel Swivel Kit TH350 Kickdown Cable Kickdown Bracket (Small Block) Shifter Release Button Release Button Spring Plastic (Delrin) Bushings Flexi-Rod (inside handle) NS...

More information

Caroline says “Call my daddy” (702) 895-6812

Caroline says “Call my daddy” (702) 895-6812 67 Rod Linkage with swivel Swivel Kit TH350 Kickdown Cable Kickdown Bracket (Small Block) Shifter Release Button Release Button Spring Plastic (Delrin) Bushings Flexi-Rod (inside handle) NS...

More information