Caroline says “Call my daddy” (702) 895-6812
Transcription
Caroline says “Call my daddy” (702) 895-6812
Caroline says “Call my daddy” (702) 895-6812 Shiftworks ® products are made in the USA NEW PRODUCTS 1970-1972 Chevelle SS & Monte Carlo Gauges Conversion for Idiot Light dashes only. This is a very simple conversion using existing dash components and NOT requiring the purchase of a new circuit board. Includes ELECTRIC Oil Pressure Gauge and sending unit, Voltmeter, and Temperature Gauge also with sending unit. A Tachometer replacing the Clock or Blank is also offered. S511-W & S514-1W ready for installation S511-W 1970Gauges S511-G 1970 TachometerS514-1G 1971-72Gauges S511-W 1971-72Tachometer S514-1W 2 www.shiftworks.com $265.00 $165.00 $265.00 $165.00 NEW PRODUCTS Light Up Your Dash! Incandescent Bulbs OEM New LED Bulbs LED101 = 1895/57 LED101 LED102 LED103 LED104 LED1002 = #168 Dash Lights #1895/57 Dash Lights #168 Back-Up Lights #1156 Park/Turn Signal #1157 Back-Up Lights 8-pack 8-pack 2-pack 2-pack $24.00 $24.00 $18.00 $18.00 www.shiftworks.com 3 NEW PRODUCTS 1967 Camaro Shifter Also 67 Firebird and 68-72 Novas Our New shifter is designed to work with the TH350/400 and all OverDrive transmissions. It fits and looks like the original, but with modern adaptability. Includes NSS installed. SW280-RCT $350.00 1963 Impala & 1963-64 Nova Shifter Our New shifter is designed to work with the TH350/400 and all OverDrive transmissions. Our shifter mounts to the floor and enables the continued use of the factory console when swapping for a modern transmission. SW230-R22$295.00 4 www.shiftworks.com NEW PRODUCTS 1964-67 Chevelle, Impala & 1965-67 Nova Shifter Our shifter handle looks very close to the original, even using original replacement black buttons for the T-Handle. Our cable systems include all hardware needed for installation including a fully functioning NSS, mounting hardware, 30 inch shift cable, and even a new slider pre-cut like the factory did to fit the T-Handle. Shifters designed to work with TH350, TH400, TH700-R4, TH200-4R and 4L60. SW280-CT7C 1964-67Chevelle SW280-CT7C $350.00 SW280-CT7N 1964-67Impala 1965-67Nova SW280-CT7N $350.00 SW280-CT7N $350.00 www.shiftworks.com 5 NEW PRODUCTS Neutral Safety & Back-up Switch Re-Location Conversion 3-speed and 4-speed Automatics 1969-81 Pontiacs and 1973-81 Chevys Does your shifter look like this? GM used a rod linkage from the transmission to operate the neutral safety and back-up switch located on the column for many of its center console equipped cars. Headers and OverDrives and many owners have in many cases lost or caused to be lost this valuable safety item. We know, we got the calls. So finally here is a solution. You can now put it on the shifter where it belongs. For all TH350 and TH400 #SW652 $49.50 Use Standard Motor Products NS7 Switch not included. For all OverDrive applications using SHIFTWORKS® shifter conversion #SW653 $94.50 Switch IS included. 6 www.shiftworks.com 1968-72 Camaro & Chevelle 1968-72 Camaro & Chevelle 4L80 Specific Conversions The 4L80 uses a variety of Range Select Shafts. A long shaft used in trucks for the factory neutral safety switch and shorter shafts, some like the TH400 and some clocked differently. SC2252 SC2253 SC2254 SC2255 1968-70 Chevelle 1971-72 Chevelle 1968-69 Camaro 1970-72 Camaro $99.50 $99.50 $99.50 $99.50 6L80 SC2612 1968-70 Chevelle SC2613 1971-72 Chevelle $99.50 $99.50 SC2614 1968-69 Camaro $99.50 SC2615 1970-72 Camaro $99.50 K100-30 30 inch cable (Stock) $74.50 K100-32 32-inch cable $79.50 6L80 Shifters and conversion kits for other GM shifters available Contact Shiftworks for more information www.shiftworks.com 7 1964-67 Chevelle Powerglide Shifter Conversion Kit The purpose of this kit is to allow the use of the 1964-67 factory installed console shifter when the Powerglide transmission is replaced with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, 4L60 or TH200-4R) transmission. This kit eliminates the rod linkage and replaces it with our cable #K100. Kit includes cable. 1964-65 Chevelle #SC2031-C TH350, TH400 #SC2041-CTH700-R4, TH200-4R, or 4L60 As Installed $175.00 $175.00 1966-67 Chevelle #SC2031-C #SC2032-C TH350, TH400 #SC2042-CTH700-R4, TH200-4R, or 4L60 $175.00 $175.00 1964-67 Chevelle #S500* 1965-67 Backup and Safety Switch $52.50 *Recommended for all conversions. As Installed #S704-BS 1966-67 Console Light Bucket and Shield #SC2042-C #4160 #S501 #S530 #S531 Button Button Spring TH350 Kickdown Cable TH350 Kickdown Bracket (Small Block) $24.50 $15.00 $4.50 $20.00 $14.50 1964-67 Powerglide Parts #S704-BS 8 #S500 www.shiftworks.com #SW421 #SW419 Rod Linkage Trans. Select Lever $41.00 $42.00 1964 IMPALA Powerglide Shifter Conversion Kit The purpose of this kit is to allow the use of the 1964 factory installed console shifter when the Powerglide transmission is replaced with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, 4L60 or TH200-4R) transmission. This kit eliminates the rod linkage and replaces it with our cable #K100. Kit includes cable. 1964 Impala #SC2051-CTH350, TH400 #SC2061-CTH700-R4, TH200-4R, or 4L60 #S500* Back-Up & Safety Switch $175.00 $175.00 $52.50 *Recommended for all conversions. #S530 TH350 Kickdown Cable $20.00 #S531 Kickdown Bracket (Small Block) $14.50 #4160Button $15.00 #S501 Button Spring $4.50 #SC2051-C #S500 #SC2061-C #S530 #S531 #S501 #4160 www.shiftworks.com 9 1965-67 Nova & IMpala Powerglide Shifter Conversion Kit Use your factory-installed console shifter when the Powerglide transmission is replaced with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, TH200 4R, or 4L60) transmission. This kit retains the rod linkage. #S1031 As Installed 1965-67 Nova #S1031 TH350, TH400 #S1041TH700-R4, TH200-4R, or 4L60 #4160 Shifter Release Button #S501 Release/Spring Button $59.50 $59.50 $15.00 $4.50 1965 Impala #S1042 As Installed #S103 TH350, TH400 #2441 3-Speed Lens #S1043TH700-R4, TH200-4R, or 4L60 $48.50 $60.50 #S103 TH350, TH400 #2592 3-Speed Lens #S1042TH700-R4, TH200-4R, or 4L60 $48.50 $48.50 $59.50 1966-67 Impala $59.50 1965-67 Neutral Safety and Back-up Switch #2441 #2592 $52.50 #S500* *Recommended for all conversions. Rod Linkage #SW423 #SW425 #SW427 #SW431 #SW404 10 65-67 Impala PG TH350 & O.D. 65-67 Impala TH400 65-67 Nova 65-67 Nova (O.D.) Swivel Kit www.shiftworks.com #SW425 pictured $45.00 $58.00 $42.00 $42.00 $12.50 1967 Camaro & Firebird, 1968-72 Nova Shifter Conversion Kit Modify your factory shifter to function correctly when replaced with a 3-speed (TH350 or TH400) or 4-speed (TH700-R4 or TH200-4R) transmission. Includes new detent, neutral safety/backup switch, all rod linkage parts, new bushings and rotating shaft. #S105-DA #S105-DB TH350 & TH400 OverDrives $175.00 $175.00 #S105-D Shifter Parts #SW429 #SW404 #S530 #S531 #6724 #S501 #S504 #S636 #S635 #SW442 #SW443 #SW441 #SW435 #S522-D 67 Rod Linkage with swivel Swivel Kit TH350 Kickdown Cable Kickdown Bracket (Small Block) Shifter Release Button Release Button Spring Plastic (Delrin) Bushings Flexi-Rod (inside handle) NSS & Back-up Light Lever OE Bottom Spring Bottom Spring (cotter pin style) Main Shaft Washers 1968-72 Nova TH Rod Linkage Neutral Safety/Back-up Switch $42.00 $12.50 $20.00 $14.50 $15.00 $4.50 $17.50 $54.50 $15.25 $4.50 $4.50 $6.50 $63.50 $52.50 #S635 #S522-D #SW435 #S636 #S504 www.shiftworks.com 11 1968-72 Chevelle, Camaro, impala & Monte Carlo 3-Speed Installations All 1968-72 factory “Horseshoe” style shifters have a universal detent for both 2-speed and 3-speed automatic transmissions. They also use the same cable. However, these models do require a cable installation kit when swapping out a Powerglide transmission for a TH350 or TH400, or when installing a factory console shifter in car originally equipped as a column shift. 1968-72 Camaro, Chevelle, Impala, & Monte Carlo Universal Kit #C351 #S640 (All Models) TH350, TH400 3-Speed Detent $37.50 $30.00 1968-69 Camaro #C401TH400 GM Factory Parts #C354TH350 #C351 1968-72 Chevelle, 1970-72 Camaro, 1968-72 Impala #C3511 TH350, TH400 #C402TH400 GM Factory Parts #4582 1968-70 3-speed Lens #4584 1971-72 3-speed Lens #S530 TH350 Kickdown Cable #S531 TH350 Kickdown Bracket #C401 #C3511 www.shiftworks.com $42.50 $45.00 $20.50 $20.50 $20.00 $14.50 (Small Block) 3-Speed Ratchet Shift Detent A new Thompson Performance product. This #DT3 detent will enable positive shifts from low to drive. #DT3 Powerglide, TH350, TH400 $90.00 #DT3-RMVB*$100.00 #S150 68-69 Camaro RVB Lens $19.50 #S151 68-70 Chevelle RVB Lens $19.50 #S152 71-72 Chevelle RVB Lens $19.50 * Reverse Manual Valve Body 12 $45.00 $42.50 PR N 12 3 See Cables 1968-72 Chevelle, Camaro, impala & Monte Carlo 4-Speed Overdrive Kit 1968-69 Camaro #SC2244 TH700-R4, TH200-4R, 4L60 $92.50 1970-72 Camaro #SC2245 TH700-R4, TH200-4R, 4L60 #SC2244 $92.50 1968-72 Impala (No Lens) #SC2240 TH700-R4, TH200-4R, 4L60 $81.25 1968 Chevelle #SC2241 TH700-R4, TH200-4R, 4L60 68-69 70-72 As Installed – Camaro $92.50 1969-70 Chevelle #SC2242 TH700-R4, TH200-4R, 4L60 $92.50 1971-72 Chevelle #SC2243 TH700-R4, TH200-4R, 4L60 #SC2243 $92.50 Cables #K100 Shifter Cable $74.50 #C100 Shifter Cable (GM #3956765) $97.75 #S532 Retainer #C100 $5.50 (clips cable to shifter handle) 4-Speed Ratchet Shift Detent A new Thomson Performance product. This detent will enable positive shifts from low to drive. #DT4* GM Overdrives $90.00 #DT4-RMVB$100.00 RVB Lens #S151 #K100 *DT4 MUST be used with a SHIFTWORKS® overdrive conversion kit series SC224X. See our video on cables: www.shiftworks.com/video/cable.htm #DT4 www.shiftworks.com 13 1968-69 Firebird & GTO 3-Speed Installations T he 1968-69 Firebird Powerglide (2-speed) shifter can be used with the TH350 or TH400 (3-speed) transmission without modification. The only difference in the factory shifter detent is an additional hard stop for 2nd gear, not present with the 2-speed detent. This stop is unnecessary. #C3521 #C3531 #K100 #SW652 #C352 1968-69 Firebird TH350$37.75 1968-69 Firebird TH400$37.75 Shifter Cable $74.50 NSS Relocation Kit $49.50 Note: See page 7 for Neutral Safety/Backup Switch 1968-81 Firebird, GTO, & Le Mans, 1973-81 Camaro 4-Speed Overdrive Kit The purpose of this kit is to allow the use of the factory installed shifter when installing a newer overdrive transmission. The kit includes a new laser cut and hardened detent, and all zhardware and brackets are included. 1973-78 Camaro #SC2261 TH700-R4, TH200-4R, or 4L60 #SC2262 $92.50 1979-81 Camaro, 1968-81 Firebird, 1968-75 GTO & Le Mans #SC2262 TH700-R4, TH200-4R, or 4L60 $92.50 #SW653 NSS Relocation Kit$94.50 #K100 As Installed 14 As Installed 73-78 Camaro www.shiftworks.com Shifter Cable Note: See page 7 for Neutral Safety/Backup Switch $74.50 1965-67 CORVETTE Shifter Conversion Kit The purpose of this kit is to allow the use of the factory installed automatic shifter when the transmission is replaced with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, 4L60, or TH200-4R) transmission. The kit retains the rod linkage. $97.25 #SC24051965-67 A new laser cut, die stamped aluminum console insert with black anodized letters for the above kit. #S141 #S142 Console Insert (TH350/400) Console Insert (Overdrive) $44.50 $44.50 Note: New shifters available. See page 22. #S141 #S142 #SC2405 1968-81 Corvette Shifter Conversion Kit This kit enables the use of the factory installed shifter when installing a newer overdrive transmission, such as the TH200-4R, TH700-R4, and the 4L60. The kit includes a new laser cut and hardened detent, and all hardware and brackets are included to allow use of the original cable. Also included is an overdrive console lens adapter. #SC24011968-71 $97.25 #SC2402 1972-76$97.25 #SC24031977-81 $97.25 Lens Indicator Adapters L to R: 68-71, 72-76, 77-81 Cables #K102-291968-82 #K102-301984-96 $94.50 $94.50 www.shiftworks.com 15 1968-72 BUICK 4-Speed Overdrive Kit Use your factory-installed automatic floor shifter with a newer 4-speed (TH700-R4, TH200-4R, or 4L60) transmission. The conversion includes a new laser cut and hardened detent for proper stops and gear selection, a new matching transmission shift lever, cable pan bracket, console lens indicator (68-69 only), new cable, all necessary hardware, and instructions. 1968-72 Buick #SC2072TH700-R4, TH200-4R, or 4L60 $175.00 As Installed (’68-’69) #SC2072 1964-66 buick 4-Speed Overdrive Kit Use your factory-installed automatic floor shifter with a newer 3-speed (TH350, TH400) or 4-speed (TH700-R-4, TH200-4R or 4L60) transmission. The conversion includes a new laser cut and hardened detent for proper stops and gear selection, a new matching transmission shift lever, cable pan bracket, new cable, all necessary hardware, and instructions. #SC2082 TH350, TH400 $175.00 #SC2092 TH200-4R, TH700-R4 or 4L60 $175.00 #SC2082 16 TH www.shiftworks.com #SC2092 OD 1964-65 GTO & LE MANS Use your factory-installed 2-speed shifter to retain the original appearance when replacing the Powerglide transmission with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, TH2004R, or 4L60) transmission. This kit eliminates the rod linkage and replaces it with a cable. Kits include new cable. #SC2152 TH350 & TH400 #SC2162 TH700-R4, TH200-4R or 4L60 $175.00 $175.00 As Installed #SC2152 1966-67 GTO & Le Mans This kit allows the use of the factory 2-speed shifter when converting to a fully functional 3-speed shifter with installation of a new TH350, TH400, TH200-4R, TH700-R4, or 4L60 transmission. Kits include our cable #K100. #SC2101-C TH350 & TH400 $175.00 #SC2121-CTH700-R4, TH200-4R, or 4L60 $175.00 #SC2101-C www.shiftworks.com 17 DUAL GATE SHIFTERS Use the original His & Hers Shifter with a new 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, TH200-4R, or 4L60) transmission. Kits include all necessary hardware for installation. 1967-68 GTO #C362TH400 #C363TH350 #C361TH700-R4, TH200-4R, or 4L60 #K100 Shifter Cable $37.50 $37.50 $45.00 $74.50 The overdrive conversion puts overdrive in a neutral position. Low, second, and drive are normally located. 1970-72 442 #C371TH700-R4, TH200-R4, or 4L60 $125.00 (includes cable) #S656-03Overdrive Indicator $19.50 #C361 442 #C371 18 www.shiftworks.com #S656-03 1967-72 CUTLASS Shifter Conversion Kit Use your factory-installed automatic floor shifter with a newer 3-speed (TH350 or TH400) or a newer 4-speed (TH700-R4, TH200-4R, or 4L60) transmission. 1967-69 Cutlass #SC2302TH350 & TH400 $150.00 1967-72 Cutlass #SC2312TH700-R4, TH200-4R, or 4L60 #SC2312 $150.00 #SC2302 1964-66 Cutlass Shifter Conversion Kit The purpose of this kit is to allow the use of the factory shifter and console when the 2-speed transmission is replaced with a TH350 or TH400 3-speed or a newer 4-speed (TH700-R4, TH200-4R, or 4L60) transmission. This kit eliminates the Rod Linkage and replaces it with a cable. 1965-66 Cutlass TH350 & TH400 TH700-R4, TH200-HR or 4L60 $150.00 #SC2381-B Black Knob Fix-It Kit #SC2381-W White Knob Fix-It Kit $75.00 $75.00 #SC2320 #SC2322 #SC2322 $150.00 Replace your broken T-Handle with our black or white smoothie knob - works great! www.shiftworks.com 19 1973-77 CUTLASS OverDrive Conversion This is a new SHIFTWORKS® conversion for the factory 1973-77 Olds console shifter. This kit can be used with the TH200-4R, 700-R4 and 4L60 series transmissions. The kit includes a SHIFTWORKS® 30-inch cable, a new shift detent, pan bracket, range select lever and overdrive indicator label. All necessary hardware is also included. TH700-R4, TH200-4R or 4L60 #SC2352 $175.00 4L60E, 4L65E, 4L70E & 4L80E Our 4LX fix-it kits resolve rod linkage conflicts with the electric neutral safety/backup light switch located on the exterior of the transmission and, for cable applications, straighten out the cable alignment if the transmission has the long Range-Select lever. 4LE Rod Linkage fix it $18.50 4LE-C Cable fix-it kit $18.50 Use with the non-E overdrive conversion for your car. 4LE Rod Linkage fix-it 602-P Cable Clocking Fix 20 www.shiftworks.com 4LE-C Cable fix-it kit $12.50 POWERGLIDE PowerGlide Range Select & Kickdown Shaft The Powerglide transmission uses several different range (gear) select shafts. Most are specific to the application and because the levers are usually welded onto the shaft, not easily changed. We have now replicated the 68 and up shaft design, including the kickdown shaft which is unique among aftermartket suppliers. 649-120 649-161 649-1500 #649-120 Range Select and Kickdown Shafts #649-161 Rod Linkage Lever $19.50 #649-1500 Cable Linkage $19.50 PG Rod Lever $125.00 PowerGlide Cable Linkage As Installed PowerGlide Shifter All Trans-Stormer Shifters can now be ordered for the PowerGlide. Simply add a P to the part number prefix. For example, the SW230-R22 becomes a SW230P-R22. Price is the same. However, some PowerGlide transmissions may require an additional Range Selector Shaft and Lever available separately. Both cable and rod linkage versions available. www.shiftworks.com 21 COLUMN SHIFT CONVERSIONS Transmission Shift Arm Connection Kit For column shifters TH350, TH400, TH200-4R, TH700-R4, 4L60, 4L80. The Kugel Komponents Kit connects the column or floor shifter to most GM transmissions. It also allows for gear pointer alignment. A splined adapter button allows the arm to be positioned at any angle. A slot positions to pivot joint for longer or shorter sweep and pointer alignment. The rod assembly is 17” – 23 1/2” pivot to pivot. #KK02 Column Shift Linkage $49.50 #KK02 Do you have a: 4L60E, 4L70E, or 4L80E with the neutral safety switch on the outside? Then you may need our 4LE Fix it kit. This allows you to connect the linkage and not have any conflicts with the switch. #4LE Kit #4LE KIT 22 www.shiftworks.com $18.50 COLUMN SHIFT Conversions Column Lens Indicators 1962-65 Nova, 1961-64 Impala, 1964-65 Chevelle & GTO/Tempest #S138 & S139 #S138 #S139 Indicator (TH) Indicator (OD) $19.50 $19.50 1967 Nova & 1967-68 Camaro #S143 #S144 #S143 & S144 Indicator (TH) Indicator (OD) $19.50 $19.50 1966 Nova #S153 #S154 Indicator TH Indicator OD #S153 $19.50 $19.50 #S154 1968-74 Nova #S155 #S156 Indicator TH Indicator OD $19.50 $19.50 #S153 AS INSTALLED #S155 #S156 1968 & 1969 Chevelle #S145 #S146 #S147 #S148 These cleverly designed adaptors fit over the existing raised letter indicators for a permanent and factory appearing solution at an affordable cost. 68 Chevelle TH 3-speed $19.50 68 Chevelle OD 4-speed $19.50 69 Chevelle TH 3-speed $19.50 69 Chevelle OD 4-speed $19.50 1966-67 Chevelle (use with clear floor shift lens) #S158 Indicator OD 4-speed #S146 AS INSTALLED #S158 66-67 Chevelle Indicator $19.50 1970-1972 Malibu Sweep dash #S157 Indicator OD 4-speed $19.50 www.shiftworks.com 23 1966-67 CHEVELLE & NOVA SS GAUGE CONVERSIONS Super Sport Gauge Conversion This new SHIFTWORKS® conversion kit will allow anyone with the standard Chevelle or Nova in-dash gauges to convert to the Super Sport style gauge package. #S505 Use the voltmeter with one-wire alternators and non-GM wiring. These gauges are designed to fit into the EXISTING openings in the back of the dash. They include the Temperature sensing device and the mechanical Oil Pressure line and fittings. An ammeter is standard, as was used by GM. 1966-67 Chevelle #S505 SS Gauges Kit with Ammeter $225.00 #S505-V SS Gauges Kit with Voltmeter $225.00 #S505-ADP Adaptors For Shiftworks® Gauges In Factory SS Dash $25.00 1966-67 Nova #S507-V SS Gauges Kit with Voltmeter $225.00 HIGH OIL PRESSURE? #S507-V 24 www.shiftworks.com Midrange for the HOP series is 60 pounds, versus the normal 30 pounds oil pressure gauge. The upper scale of the HOP series oil pressure gauge is 100+ pounds. #S505-HOP$225.00 #S505-VHOP$225.00 #S507-HOP$225.00 Nova In-Dash Tachometer Conversions In-Dash Tachometer SHIFTWORKS® is now offering In-Dash Tachometer conversions. Replaces the clock with a 7000 RPM TACH. This is a Two-For. Get rid of that “Tachy” steering column appendage AND that broken clock. All SHIFTWORKS® In-Dash Tachs are engineered to fit into EXISTING dash openings and are designed with a factory look. #S510-1 Installed 1964-65 Chevelle #S510-1 1964-65 Chevelle In-Dash Tachometer $165.00 1968 Chevelle #S512 1968 Chevelle In-Dash Tachometer $165.00 #S510-1 #S512 #S512 Installed 1968 Chevelle In-Dash Tachometer and Gauges #S508-VT Gauges Conversion with Tachometer Replaces Idiot Lights Before $355.00 After www.shiftworks.com 25 Chevelle In-Dash Tachometer CONVERSIONS In-Dash Tachometer SHIFTWORKS® is now offering In-Dash Tachometer conversions. Replaces the clock with a 7000 RPM TACH. This is a Two-For. Get rid of that “Tachy” steering column appendage AND that broken clock. #S513 Installed All SHIFTWORKS® In-Dash Tachs are engineered to fit into EXISTING dash openings and are designed with a factory look. 1969 Chevelle #S513 #S514 Installed #S513 1969 Chevelle In-Dash Tachometer $145.00 1970-72 Chevelle SS #S514-1G #S514-1W 1970 Chevelle In-Dash Tachometer 1971-72 Chevelle In-Dash Tachometer $165.00 $165.00 1970-72 Chevelle Malibu #S514-W #S518 Installed 26 www.shiftworks.com #S518-G #S518-W 1970 Malibu In-Dash Tachometer 1971-72 Malibu In-Dash Tachometer $145.00 $145.00 #S518-G Nova In-Dash Tachometer Conversions #S515 Installed 1963-65 Nova #S515 1963-65 Nova In-Dash Tachometer $165.00 1968-72 Nova #S517-G #S517-W 1968-70 Nova In-Dash Tachometer 1971-72 Nova In-Dash Tachometer $145.00 $145.00 #S515 #S517 Installed #S517 www.shiftworks.com 27 4005 West Reno Ave. Unit E Las Vegas, NV 89118 (702) 895-6812 Shiftworks® IN-DASH GAUGE CONVERSIONS
Similar documents
Shiftworks® products are made in the USA
67 Rod Linkage with swivel Swivel Kit TH350 Kickdown Cable Kickdown Bracket (Small Block) Shifter Release Button Release Button Spring Plastic (Delrin) Bushings Flexi-Rod (inside handle) NSS & Back...
More information