Metroll QLD Price Book

Transcription

CAIRNS ORDER SCHEDULE
Effective from 30th JUNE, 2014
MATERIAL
ZINCALUME AND COLOUR
ORDER CLOSE
ANTICIPATED
DELIVERY
COLOUR
ROOFING
Corodek®, Trimclad®
3pm Daily
2 Working Days
Curving Quality
3pm Daily
8 Working Days
Metrospan®
3pm Daily
8 Working Days
Metlok® 680 Cyclonic
3pm Daily
3 Working Days
Monak®
3pm Daily
3 Working Days
Miniclad®
3pm Daily
8 Working Days
Interwall
3pm Daily
15 Working Days
Roll Top Ridge
3pm Daily
2 Working Days
Ventridge
3pm Daily
10 Working Days
FASCIA AND GUTTERING
Fascia
3pm Daily
2 Working Days
150 Big Front Quad Gutter
3pm Daily
2 Working Days
175 Big Front Quad Gutter
3pm Daily
15 Working Days
150 Low Front Quad Gutter
3pm Daily
15 Working Days
Metroline Square Gutter
3pm Daily
2 Working Days
3pm Daily
3pm Daily
2 Working Days
10 Working Days
FLASHINGS
Flashing
Rainwater Head & Sumps
Subject to
workload
Daily
Subject to workload
STEEL BUILDING FRAME COMPONENTS
Stud, Plate, Noggin
3pm Daily
3 Working Days
Top Hat Batten 64
3pm Daily
2 W orking Days
Top Hat Batten 100
3pm Daily
2 Working Days
Top Hat Batten 120
3pm Daily
10 Working Days
Roof Batten 40mm
3pm Daily
2 Working Days
Ceiling Batten
3pm Daily
2 Working Days
PURLINS & GIRTS
PURLIN TYPE
ORDERS CLOSE 3.00PM
ANTICIPATED DELIVERY
100
C+Z
Friday
Tuesday
150
C+Z
Wednesday
Monday
200
C+Z
Monday
Wednesday
250
C+Z
Tuesday
Thursday
300
C+Z
Tuesday
Thursday
Note:
These lead times are
Best estimate only.
Note: 300mm Purlins 2.4mm only
Project orders over 2.5 metric tonnes should expect additional lead times of 3 days on top of regular lead times. 1.9mm and 2.4mm project orders of 2.5 metric tonnes plus
must be pre-arranged to fit into rolling schedule with no less than 3 additional working days.
Purlin runs will be limited to 60L/M minimum per profile. If we do not have more than 60L/M to run, your order will wait until an additional order is in the system to make up
a 60L/M minimum. To ease any burden this may place on you we will carry C Section in stock lengths or common size purlins in 6.5L/M lengths.
Should you have any special requirements, PLEASE liaise with your Sales Representative.
300 Series and Fascia Purlins are available and sale terms are subject to case by case negotiation.
Cut off times as specified for all products will be strictly adhered to.
5
2
The Goods and Services Tax (GST) is an addition to the prices in this
st
Price List and will beEffective
charged on
Net1Invoiced
Price of Goods &
from
Oct 2013
Services supplied.
th
Effective from 30 JUNE, 2014
CAIRNS DELIVERY TERMS A N D CONDITIONS
Metroll Queensland Pty. Ltd. undertake to deliver either On Ground at site or On Truck at site in accordance with the conditions outlined below.
DELIVERY ON GROUND AT SITE/DELIVERY O N TRUCK AT SITE
Lengths up to 9000mm - Delivered on Ground at Site
Lengths up to 13000mm - Delivered on Ground at Site
DELIVERIES INVOLVING EXTRA COSTS
A delivery charge will apply to all store and site deliveries; refer Cairns Delivery Charges.
Early Morning delivery - should an early morning delivery require the working of overtime, refer Cairns Delivery Charges.
Cairns Metropolitan Area
Escorts are required for lengths over 18000mm, costs vary depending on location and length, refer Cairns Delivery Charges.
Cairns Metropolitan Area – Lengths of over 9000mm P.O.A. A setting up charge of $90.00 per hour will apply. Escorts are required for lengths over 18000mm, costs
vary depending on location and length, and a quotation will be required for lengths of over 15500mm.
Country Areas
This schedule applies to areas listed above only. It should be noted however that the maximum length that can be collect CUSTOMERS CARE without
additional transport c o s t s i s 12000mm. Special packing is subject to enquiry and additional costs incurred will be charged.
DEMURRAGE CHARGES
Where trucks are held on sites for more than 1 hour a demurrage charge will apply.
FACTORS AFFECTING DELIVERIES
Deliveries of lengths over 13000mm require a crane onsite.
Public Holidays - These will cause alterations. Please contact your local Metroll Sales Office for individual changes.
Sea Packs - Special metal protective packs have to be custom made and advice of requirements seven days before normal delivery dates is necessary.
Long Lengths Up to 13000mm may travel unrestricted on public roads and highways at any time. From 13000mm to 18000 may travel only between daylight and
7am and from 9am to 4pm.
Over 20500mm - All lengths over 20500mm must be escorted by private escort or Police, dependent on the length, and they must reach their destination by 7am.
Regulations applying to the particular public road at the site will determine whether or not the vehicle can park on the street or only on the site. This condition
should be checked as special permission m ay be needed to park on the street, e.g. Inner City areas.
PACKING
Metroll Queensland standard pack for roofing and walling is one ton bundles. If special packing is required it will be necessary for an enquiry to be placed. In
some cases it may be necessary for additional charges to be levied.
SITE ACCESSIBILITY
Should Metroll Queensland deem that the site is inaccessible, it will be the purchaser’s responsibility to nominate an alternative site where the material may be
unloaded. To obviate problems w h e re difficult sites are concerned, it is recommended that purchasers request that the site be inspected priorto delivery. Any
extra costs incurred will be CUSTOMERS CARE.
UNATTENDED SITES
Metroll Queensland accepts no responsibility for goods delivered to unattended sites.
Advance Notice required to arrange escorted Deliveries - All Products:
From 18000mm to 20000mm – 48 hours’ notice, from 20000mm – 7 days’ notice
TERMS AND CONDITIONS OF SALE
Any sale of the listed goods will be subject to Metroll Queensland Pty. Ltd. General Terms and Conditions o f Sale which are included in this Trade
Price Catalogue.
SPECIFIED TIME DELIVERIES
Deliveries can be booked for specific time in the metropolitan area only (an additional charge applies). There is limited availability of this service and this must be
prearranged directly with Internal Trade Sales people. Bookings are on a ‘first come first served’ basis. Where a ‘First Delivery’ i s required this cannot be booked
later than 12.00 noon on the day prior to despatch unless the customer is willing to pay for additional taxi-truck costs. Our nominated ‘first delivery’ time is 7.00
am, and the delivery may occur at any time prior to this time, but should not be more than 30 minutes after.
RESTOCKING FEE
Product that has been manufactured or purchased specifically to your requirements CANNOT be
returned. Stock line items may be returned for credit, subject to the following charges:
Where goods are returned by the customer, a re-stocking f e e of 15% ($30 minimum) is applicable.
i)
Where goods are picked up by Metroll for return, standard delivery charges plus a re-stocking fee of 15% ($30 minimum) are applicable.
ii)
Damaged goods will not be accepted for credit.
TRANSPORT CHARGES
Long Lengths and Escorts (48 Hours’ Notice Required)
Additional transport charges for long lengths and escorts will be charged to a customer at cost
PICK UPS
Monday-Friday 7.30 am - 5.00 pm
2
3
The Goods and Services Tax (GST) is an addition to the prices
in this Price List and will be charged on Net Invoiced Price of
Goods & Services supplied
th
Effective from 30 JUNE, 2014
CAIRNS DELIVERY CHARGES
The following charges apply to the Cairns area.
LENGTH
$ PRICE
(All lengths shown in material length)
Store Deliveries (Cairns Metropolitan Area)
Cairns Metropolitan Area
Outside Cairns, Port Douglas, Tully and Tablelands
(within 10km of main roads)
60
125
12,100 – 15,000
Deliveries (Plus escorts and Police as applicable)
230
15,000 – 20,000
Deliveries (Plus escorts and Police as applicable)
345
Sea Wrap packaging and delivered to wharf
180
Metal Box packaging
.55 Flashing Material
34/LM
Where trucks are held more than 1 hour a demurrage charge will
apply.
For a trailer left loaded on site or at Metroll Building Products
Per day or part thereof
230
0 – 12000
DEMURRAGE
DEMURRAGE
165
UNLOADING
Allowance has been made for 1 hour of unloading at site or
store. Additional time will be charged at a rate of:
130/hr
TIME
Delays greater than this will be charged at the hourly rate of:
130/hr
REDELIVERY
When information regarding a delivery address is wrong and
goods require redelivery, a charge will be incurred by the customer
140
3
4
CAIRNS DELIVERY SCHEDULE
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
Innisfail
Port Douglas
Innisfail
Port Douglas
Tully
Mareeba
Tully
Mareeba
(Order Placed by 12 noon Thursday)
(Order Placed by 12 noon Friday)
(Order Placed by 12 noon Monday)
(Order Placed by 12 noon Tuesday)
Mission Beach
Atherton
Mission Beach
Atherton
Should you require delivery outside the schedule there may be additional surcharges. Contact our office for Costs.
4
5
TERMS AND CO NDI TIONS
METROLL QUEENSLAND PTY LTD
Brisbane
411 Freeman Road, Richlands, Qld 4077
Toowoomba
Cnr Carroll & Boundary Road, Toowoomba Qld 4350
Roma
2-16 Cartwright Street, Roma Qld 4455
Cairns
Cnr Ray Jones Drive and Ruth Street, Woree Qld 4868
Townsville
56 Keane Street Currajong, Townsville Qld 4812
Darwin
81-87 Marjorie Street, Pinelands NT 0828
Bundaberg
Cnr Kay McDuff Drive & Charlie Trigg Cres, Bundaberg Qld 4670
Rockhampton
9-11 Monier Road, Parkhurst Rockhampton Qld 4072
Sunshine Coast
10 Bearing Avenue, Warana Qld 4575
Lismore
29 Krauss Avenue, South Lismore NSW 2480
Phone:
Fax:
(07) 3375 0100
(07) 3375 0150
Phone:
Fax:
(07) 4634 6144
(07) 4633 1936
Phone:
Fax:
(07) 4622 7370
(07) 4622 5754
Phone:
Fax:
(07) 4054 0888
(07) 4054 0811
Phone:
Fax:
(07) 4779 8266
(07) 4775 1835
Phone:
Fax:
(08) 8935 9500
(08) 8935 9599
Phone:
Fax:
(07) 4155 5999
(07) 4155 5900
Phone:
Fax:
(07) 4920 0900
(07) 4920 0940
Phone:
Fax:
(07) 5493 7872
(07) 5493 6849
Phone:
Fax:
(02) 6622 6677
(02) 6622 6678
Phone:
(07) 4862 8600
Fax:
(07) 4862 8650
Mackay
19B John Vella Drive, Paget, Mackay QLD 4740
REFER TO NEXT PAGE FOR STANDARD TERMS AND CONDITIONS OF SALE
6
6
METROLL QUEENSLAND PTY LTD A.C.N. 010 035 266 (“the Company”)
TERMS AND CONDITIONS OF SALE
2.0
(iv) The Customer agrees to accept delivery of all goods held by the Company or in transit in
respect of such order.
(v) The Customer agrees to pay all costs, expenses and liabilities incurred by the Company in
consequence of the cancellation, variation or suspension of the order and accepts consequential
delay.
8. Limitation of Liability
(i) The Company may compute an estimate of dimensions and quantities of goods based on plans
or other information given by or on behalf of the Customer. The Company does not accept any
liability as to the correct computation of any such estimate and the estimate is provided to the
Customer as indicative only and the Company is not responsible for any mistakes in the estimate.
The Customer undertakes to check any such estimate and in any event accepts full responsibility
for the dimensions and quantities of goods ordered as independently computed by the Customer
without relying on the estimate.
(ii) The Customer warrants to the Company that it will not rely on representations made and/or
advice given by the Company or its employees in connection with the design, dimensions,
installation or use of goods sold and agrees that the Company shall not be liable for the
consequences of any mistakes in such representation or advice even if made or given negligently.
(iii) It is a condition of sale that any description or specification given by the Company or in printed
literature of the Company is for general indicative purposes only and does not render the Company
responsible in any way except to the extent that the goods shall comply with the standards set out
in such description or specification and that such description or specification shall not be taken as
implying or giving any undertaking as to fitness for any particular purpose.
(iv) If goods are required for a particular purpose, the Customer must clearly specify that purpose
in writing in the order placed with the Company and obtain written assurance from the Company
that the goods when supplied will meet that requirement. If the Customer does not specify the
particular purpose and the Company does not expressly undertake in writing that the goods will be
fit for the specified purpose, then the Customer agrees that it did not rely on the skill or judgment
of the Company in relation to the suitability of the goods for a particular purpose.
(v) The Company shall not be liable for delay in delivery of the goods or delivery of the goods in
instalments or failure to deliver due to any cause whatsoever. The Customer shall not be relieved
from any obligation to accept or pay for goods by reason of any delay in or the instalment delivery
of the goods. In no event shall the Company be responsible for any loss of profits, penalties,
disruption, expenditure and/or damages incurred and/or sustained by the Customer due directly or
indirectly to because of any delay in or the instalment delivery of the goods.
(vi) Any complaint by the Customer for failure to deliver or delayed delivery must be notified to
the Company in writing within three (3) business days of the failure or delay in delivery. The
Customer waives, foregoes, abandons and forgives forever any claim whatsoever the Customer
may have against the Company unless it has strictly complied with these notification requirements.
(vii) If the goods are delivered by the Company to the Customer in a damaged state or there is
short delivery or incorrect or faulty goods are supplied, the Customer must request the Company
in writing for their replacement within eight (8) hours of the delivery of the alleged damaged, short
supplied, incorrect or faulty goods and the Customer must at the time of the delivery, specify in
the delivery docket to be given to the deliverer the nature and extent of the alleged damage, short
supply or incorrectness of the goods.
(viii) Any goods returned by the Customer will be held and/or disposed of by the Company on
behalf of the Customer unless the return of the goods is preceded by the complaint and the claim
in writing as specified in the preceding paragraph. The Customer must facilitate the inspection of
the goods by a Company representative prior to return. The acceptance of any returned goods shall
not imply any acceptance by the Company of the Customer’s claim.
(ix) Any claim, whatsoever against the Company arising in contract or otherwise howsoever and
whether directly or indirectly from the sale and delivery of goods including without limitation for
failure to deliver, delayed delivery, short delivery, supply of incorrect goods, damaged goods
and/or defective goods shall be limited to the price of the goods which was agreed by the Customer
and the Company or in the absence of such agreement a reasonable price therefor confined to the
quantity of the goods required to be delivered on the occasion by reference to which the claim
arises.
(x) To the fullest extent permitted by law all terms, conditions, guarantees, indemnities and
warranties statutory or otherwise (“Obligations”) not expressly provided in these Terms and
Conditions of Sale are excluded. To the extent that any such Obligation cannot be excluded due to
provisions the Competition and Consumer Law 2010 or any other statute and the Customer makes
a claim with which the Company accepts or which is proven to be valid, then, to the extent
permitted by law, the Company’s liability is limited, at the Company’s option, to repairing or
replacing the relevant goods or cost of repair or replacement.
(xi) The Customer will indemnify the Company for any claims whatsoever and howsoever made
by a third party against the Company for any default of the Company or the Customer relating to
or directly or indirectly arising from any contract and/or arrangement made between the Company
and the Customer or any goods or services provided by the Company to the Customer or by the
Customer to a third party.
9. Delivery
(i) Unless agreed otherwise in writing prior to delivery, unloading of goods shall be the Customer’s
responsibility and the Company will not be responsible for any damage whatsoever resulting from
the unloading of the goods by the Customer or by anyone on its behalf, or by the Company’s
employee or agent.
(ii) The Customer indemnifies the Company from any claim whatsoever resulting from the
Customer, its employee or agent loading goods supplied by the Company on any vehicle or
unloading goods supplied by the Company from any vehicle.
(iii) Where goods are delivered to a particular site the goods will be entirely at the Customer’s risk
when delivered.
(iv) If the cartage contractor or driver is not satisfied that access to the delivery site is safe the
goods will be unloaded at kerbside adjacent to the delivery address.
(v) A quantity, description, date, time and place of delivery as shown on the Company’s invoice
or delivery docket shall be conclusive evidence of quantity, description, date, time and place of
delivery of such goods.
(vi) If the site is unattended goods will be unloaded on the site or if the site is not accessible at the
kerbside adjacent to the site and the delivery docket/manifest signed by the cartage contractor or
the driver of the Company that the goods were delivered accordingly shall be conclusive evidence
of due delivery of the goods.
(vii) The Company if requested to enter a property accepts no responsibility for any damage caused
by the Company or its agent.
(viii) A standard delivery charge as published by the Company from time to time in its price list
will apply.
(ix) Where trucks are held on a site for more than 1 hour additional costs will apply.
(x) For delivery of lengths over 9 metres the Customer must enquire at time of ordering about
additional delivery costs.
(xi) Deferred delivery of goods already manufactured for the Customer will incur storage charge
of 0.5% per week of invoice value.
All goods and services purchased from the Company (being Metroll Queensland Pty Ltd or any
related body corporate from whom the Customer obtains goods or services ) are sold subject to the
following terms and conditions of sale which shall prevail notwithstanding any other document,
terms and conditions and/or anything else except a written agreement signed by the Customer and
the Company, except only for such terms, guarantees, indemnities or other obligations as are
implied or imposed by or under any law and which cannot be excluded.
1. Price & Goods and Services Tax (“GST”)
The price will be the price current at the time of order or supply unless otherwise agreed in writing.
GST and/or any other Government imposts whatsoever applicable to the supply of goods and/or
services will be payable by the Customer.
2. Payment
(i) Payment for goods and services purchased from the Company shall be made before delivery or
in the case of Customers who have an account with the Company payment must be received by the
last working day of the month after the month of invoice.
(ii) Goods and services are sold at list price. Any agreement to charge less is conditional on the
Customer paying the lower amount on time. Failure to pay on time will result in full list price being
payable.
(iii) The Customer shall not be entitled to retain any money owing to the Company notwithstanding
any default or alleged default by the Company including the supply of defective or allegedly
defective goods or delay or alleged delay in supply.
(iv) If payment is not made on time, the Customer shall pay interest to the Company on any amount
owing at the rate of 3% above Westpac Banking Corporation’s Overdraft Business Rate.
(v) A certificate signed by a responsible officer of the Company shall be prima facie evidence of
the amount owed to the Company by the Customer at the date of such certificate.
(vi) The Customer will pay to the Company without deduction or set-off all moneys owing to the
Company.
(vii) The Company shall be entitled at any time to set-off any moneys then or contingently owed
to the Company by the Customer against any debt the Company owes to the Customer.
3. Default
If the Customer defaults in any payment, or if in the opinion of the Company, the Customer is
unlikely to be able to meet its liability as it falls due then the Company may at its option:
(i) require payment forthwith of all amounts owing by the Customer to the Company, whether or
not such amounts are then due for payment including without limitation, all interest, administration
and collection charges and all legal costs and any payment by the Customer shall be first applied
to such charges and costs;
(ii) Terminate any contract or contracts in relation to goods which have not been delivered and/or
withdraw credit.
4. Reservation of Title
(i) Property in any goods supplied by the Company and any proceeds arising therefrom shall remain
the sole and absolute property of the Company as legal and equitable owner until the full price for
all goods and services supplied is received by the Company .
(ii) Risk in the goods shall pass to the Customer on delivery to the Customer or its agent.
(iii) The Customer irrevocably authorises the Company to repossess any goods supplied by the
Company to the Customer, and to take possession of any proceeds therefrom, without any notice
if the Customer fails to make any payment when it is due or if in the opinion of the Company the
payment of any amount in respect of goods and services supplied by the Company is in jeopardy
or the Customer commences to be wound up or is placed in administration or under official
management or into liquidation or suffers a receiver or manager to be appointed in respect of any
of its assets. For those purposes the Customer, in consideration of credit being given, irrevocably
authorises the Company to enter onto any land or premises of the Customer or to which the
Customer has a right of entry. The Company has the right to take or collect any proceeds and to
resell any repossessed goods.
(iv) The Customer will prior to attaching any goods onto any land or building notify the owner of
the land or building that such goods are subject to this reservation of title clause, except only as
provided by law.
(v) On the Company repossessing goods or taking possession of proceeds the Customer’s debt to
the Company continues and is reduced only by the net amount after costs the Company realises
from the proceeds or from the resale of the repossessed goods.
(vi) The Customer releases and indemnifies the Company and its servants or agents from all claims
for loss or damage caused by the Company or its servants or agents in enforcing or attempting to
enforce its rights under this clause 4, clause 5 or under clause 6.
5. Personal Property Securities Act 2009 (Clth) (“PPSA”)
(i) Terms used in the PPSA have the same meaning in clause 4 and in this clause and “section”
refers to a provision of the PPSA.
(ii) This clause applies to the Company’s security interests in goods it supplies to the Customer
and in proceeds derived therefrom.
(iii) The Customer waives it right under section 157(1) to notice of verification of any registration
applied for by the Company.
(iv) The Company can apply amounts received from the Customer towards amounts owing by the
Customer in any order it chooses.
(v) The Company may enforce its security interests by exercising all or any of its rights under the
PPSA, these Terms and Conditions of Sale or general law.
(vi) To the maximum extent permitted under the PPSA the parties contract out of the following
sections – 95, 118, 121(4), 125, 129(2), 129(3), 130, 132(3) (d), 132(4), 135, 142, 143 and the
second sentence of section 126(2).
(vii) The Customer must at its own expense do anything the Company requires of it to ensure the
Company’s security interest is perfected and has priority, to obtain and maintain registration of the
Company’s security interests or to enforce those interests.
(viii) The Customer is liable for all fees and other expenses incurred by the Company in registering
a security interest in goods supplied to the Customer or in the proceeds derived therefrom, and all
costs of maintaining or changing a registration.
6. Caveat
The Customer hereby charges in favour of the Company as security for the Customer’s obligations
to the Company, all right title and interest in any land held now by the Customer alone or jointly
with anyone or acquired by the Customer at any time hereafter as beneficial owner and as trustee
of every trust. If the Customer defaults in payment of any amount owed to the Company, the
Customer specifically authorises the Company to lodge a caveat against any dealings with any
such property and appoints the Company to be the Customer’s Attorney for this purpose.
7. Orders and Cancellations
(i) The Company may in its absolute discretion refuse to supply goods or services for any reason
whatsoever.
(ii) Should there be any discrepancy between the orders by telephone as recorded and processed
by the Company and later confirmation in writing by the Customer, the Company’s record of
telephone order shall prevail.
(iii) Once an order has been accepted by the Company, the Customer can only cancel, vary or
suspend the order (whether in whole or in part) if the Company agrees in writing to such
cancellation, variation or suspension.
7
8
The Goods and Services Tax (GST) is an additional to the prices in
this Price List and will be charged on Net Invoice Price of Goods &
Services supplied
Roof Sheeting - Effective 6/07/2015
CORODEK® - 5° Minimum Roof Pitch
Code
DETAILS
BMT
C/BOND
$/M²
ZINC
$/M²
ULTRA
$/M²
GALV
$/M²
42**CORAKHTV
Hi Tensile
0.42
36.04
36.78
62.95
48.54
48**CORAKHTV
Hi Tensile
0.48
44.14
45.52
76.56
-
42**CORAKDSV
Double Sided Gloss
(White/Cream)
.42
42.66
-
-
-
*Short Length Surcharge (under 1 metre) per sheet $1.10
TRIMCLAD® - 2° Minimum Roof Pitch
Code
DETAILS
BMT
C/BOND
$/M²
ZINC
$/M²
ULTRA
$/M²
GALV
$/M²
42**TRIMCHTV
Hi Tensile
0.42
36.04
36.78
62.95
48.54
42**TRIMCDSV
Double Sided Gloss
(White/Cream)
0.42
42.66
-
-
-
48**TRIMCHTV
Hi Tensile
0.48
44.14
45.52
76.56
-
METLOK 680 - 1° Minimum Roof Pitch
Code
DETAILS
BMT
C/BOND
$/M²
Zinc
$/M²
Ultra
$/M²
42**CMETL68V
Hi Tensile Wall Cladding
.42
41.66
41.07
74.05
48*CMETL68V
Hi Tensile Wall Cladding
.48
47.79
46.96
79.20
METLOK CLIP
Code
DETAILS
UNI
T
click
$/EA
METCLIP680
Metclip 680 Series2
EA
8.04
9
9
Services supplied
Wall Sheeting - Effective 6/07/2015
MINI CORODEK® - Maximum Length 5000mm
Code
DETAILS
BMT
C/BOND
$/M²
Zinc
$/M²
Ultra
$/M²
42**MINICORV
Hi Tensile
.42
47.45
47.45
73.32
48**MINICORV
Hi Tensile
.48
54.22
54.22
83.80
Curving and Bullnosing - Effective 6/07/2015
*Short Length Surcharge (under 1 metre) per sheet $1.10 *
Services supplied
Packing charges may apply *
CORODEK® Curving Quality - 5° Minimum Roof Pitch
Code
DETAILS
BMT
C/BOND
$/M²
ZINC
$/M²
60**CORAKCQV
Curving Quality
0.6
53.40
53.80
CORODEK® CURVING & BULLNOSING
Code
DETAILS
BMT
PRICE
$/EA
CC3
Up to 3 metres
Per Curve
20.09
CC4
3 to 4 metres
Per Curve
21.57
CC6
4 to 6 metres
Per Curve
29.71
CC8
6 to 8 metres
Per Curve
33.38
CC10
8 to 10 metres
Per Curve
41.72
CC12
10 to 12 metres
Per Curve
52.20
CCF
Full Circle (Tanks)
Per Curve
48.10
CCHC
Half Circle = sheet
length price + per sheet
extra
Per Curve
9.19
Note - where special transport is required to deliver curved sheeting an appropriate transport cost will be charged
**Template must be supplied with all jobs**
10
10
CURVING DETAILS
.60 CORODEK® CURVING QUALITY
13
11
RAINWATER RUN-OFF CAPACITIES
Maximum Roof Run (in metres) for roof slopes and
rainfall intensities shown*
Rainfall
Intensity
mm/hr
Sheet
Profile
CORODEK®
TRIMCLAD®
METROSPAN®
METLOK 700®
1 in 60
(1°)
100
150
200
250
300
400
150
200
250
300
400
200
250
300
400
250
300
400
500
1 in 30
(2°)
113
85
68
57
42
25
20
11
13
165
138
103
129
107
80
Roof Slope
1 in 20
1 in 12
(3°)
(5°)
139
105
84
70
52
35
28
22
18
203
170
145
40
27
22
16
13
10
180
135
108
90
67
45
36
30
23
262
218
164
1 in 7.5
(7.5°)
1 in 6
(10°)
54
35
26
20
17
13
58
38
28
23
19
14
170
135
114
85
58
46
38
29
332
277
207
127
96
65
52
43
32
RAINFALL INTENSITIES (mm/hr)
Locality
ACT
NSW
VIC
QLD
SA
WA
TAS
NT
Canberra
Broken Hill
Bathurst
Sydney
Newcastle
Mildura
Melbourne
Ballarat
Cloncurry
Brisbane
Rockhampton
Cairns
Mt Gambier
Adelaide
Geraldton
Perth
Hobart
Alice Springs
Darwin
For Flooding
once in 20 years
For Flooding
once in 100 years
125
117
121
212
166
103
91
96
157
239
217
318
80
85
108
111
74
127
271
174
161
154
277
213
141
117
125
204
312
267
427
104
111
136
144
95
178
335
14 12
Note: For details on roof slope
recommendations suitable in specific
applications and using a particular
Metroll roofing profile, please consult
our technical literature or phone your
nearest service centre for assistance.
Figures are taken from AS2180-1986,
Amendment No. 2 Metal Rainwater
Goods Selection and Installation.
*The rainwater run-off and drainage
capacity may place some limitations on
the total length of a sheet run and must
be considered during construction and
design phase.
The total length of roof sheeting which
shall include end laps, expansion joints
or steps and draining the roof in one
direction, shall be considered as a single
roof run.
Services supplied
Ridge and Barge - Effective 6/07/2015
GABLE ROLL
Code
DETAILS
C/BOND
Ea
ZINC
Ea
GABROLLCN**/18
50mm
23.54
21.10
2.4m Lengths only excluding Cairns 1.8m lengths only.
Lead times on this product may vary between branchs. Please call to confirm availablity.
ROLL TOP RIDGE
Code
DETAILS
C/BOND
$/LM
ULTRA
$/LM
ZINC
$/LM
40**ROLLTOPV
Cut to Length
17.94
24.37
18.18
Code
DETAILS
C/BOND
$/LM
ZINC
$/LM
ULTRA
$/LM
55**BCAP343V
Metroline Barge Capping
16.95
16.47
25.41
METROLINE BARGE CAPPING CAIRNS
15
13
Services supplied
Metal Fasteners - Effective 6/07/2015
METAL TEK SCREWS - FOR FIXING TO STEEL FROM 1.0mm
Code
DETAILS
SIZE
PLAIN
$/1000
TEK1016WAF
Wafer Tek Zincalloy
Class 3
10-16 x 16mm
91.17
TEK1022WAF
Wafer Tek Zincalloy
Class 3
10-16 x 22mm
165.88
CLIMASEAL 4 FINISH METAL TEK SCREWS - FOR FIXING TO STEEL FROM 1.0mm
Code
DETAILS
SIZE
PLAIN
$/1000
C/BOND
$/1000
TEK1016BARE**
Hex Tek Bare Climaseal
4
10-16 x 16mm
145.35
204.91
TEK1425B**
4
14-10 x 25mm
304.34
363.88
TEK1220BARE**
4
243.30
302.82
Code
DETAILS
SIZE
PLAIN
$/1000
C/BOND
$/1000
TEK1016NEO**
Hex Tek Seal Climaseal 4
10-16 x 16mm
197.13
256.67
TEK1220NEO**
12-14 x 20mm
303.75
363.28
TEK1425NEO**
14-10 x 25mm
328.48
388.01
Code
DETAILS
SIZE
PLAIN
$/1000
C/BOND
$/1000
RIVETABMG4-1/3E**
Aluminium Rivets
ABM6 4-1/3
39.69
49.88
Code
DETAILS
SIZE
PLAIN
$/1000
C/BOND
$/1000
TEK1453NEO**
14-10 x 50mm
494.43
553.98
TEK1465NEO**
14-10 x 65mm
647.95
707.52
20
14
Services supplied
Timber Fasteners - Effective 6/07/2015
Timber Fasteners
Code
DETAILS
SIZE
PLAIN
$/1000
BATZIPM5.540
Batten Zip M5.5-11 x
40mm Class 3
M5.5-11 x 40mm
148.82
Code
DETAILS
SIZE
PLAIN
$/1000
T171475BHBATT
Bugle Batten Screw
Class 2
14-10 x 75mm
304.58
T1714100BHBATT
Bugle Batten Screw
Class 2
14-10 x 100mm
418.57
Code
DETAILS
SIZE
PLAIN
$/1000
C/BOND
$/1000
RZM625**
Hexagon Head Hi-Grip
with Seal
M6-11x25mm
218.96
278.48
RZM650**
with Seal
M6-11x50mm
281.66
341.22
RZM665**
with Seal
M6-11x65mm
336.88
396.42
Code
DETAILS
SIZE
PLAIN
$/1000
BUGLE625
Bugle Needle Point Class
1
6-18 x 25mm
30.53
ROOFZIPS
CLIMASEAL 4 FINISH TYPE 17 SCREWS - FOR FIXING TO TIMBER
Code
DETAILS
SIZE
PLAIN
$/1000
C/BOND
$/1000
T171225NEO**
Hex Seal Type 17
Climaseal 4
12-11 x 25mm
283.29
342.84
Code
DETAILS
PLAIN
$/1000
C/BOND
$/1000
T171465NEO**
HEZ TYPE 17 CLIMSEAL
386.62
446.17
T171450NEO**
HEX TYPE 17 CLIMSEAL 4
323.18
382.72
21
15
Services supplied
Cyclonic Fasteners - Effective 6/07/2015
METAL TEK® CYCLONIC ASSEMBLIES
Code
DETAILS
SIZE
PLAIN
$/1000
C/BOND
$/1000
TEK1453CA**
Tek Cyclone Assembly
Corodek
14-10 x 53mm CLR
906.37
1045.24
Code
DETAILS
SIZE
PLAIN
$/1000
C/BOND
$/1000
TEK1453CATRIM**
Trimclad
14-10 x 53mm CLR
928.17
1065.33
Code
DETAILS
SIZE
PLAIN
$/1000
C/BOND
$/1000
TEK1453BS**
Multi Seal
14-10 x 53mm CLR
1004.69
1153.51
TEK1465BS**
Multi Seal
14-10 x 65mm CLR
1498.47
1704.37
ROOFZIP CORODEK
Code
DETAILS
PLAIN
$/1000
C/BOND
$/1000
RZM650CA**
ROOFZIP CYCLONE ASSEMBLY
CORODEK
856.40
995.34
23
16
Services supplied
Cyclonic Fasteners - Effective 6/07/2015
ROOFZIP RIDGE CAP
Code
DETAILS
PLAIN
$/1000
C/BOND
$/1000
RZM655BS**
ROOFZIP CYCLONE ASSEMBLY 25MM
RIDGE CAP
856.21
995.13
ROOFZIP T17 CORODEK
Code
DETAILS
PLAIN
$/1000
C/BOND
$/1000
T171450CA**
TYPE 17 CORODEK CUCLONE
ASSEMBLY CLIMSEAL 4
773.08
993.70
T171465CA**
TYPE T17 TRIMCLAD CYCLONE
ASSEMBLY CLIMSEAL 4
854.76
993.70
Code
DETAILS
PLAIN
$/1000
C/BOND
$/1000
T171465CA**
TYPE T17 TRIMCLAD CYCLONE
ASSEMBLY CLIMSEAL 4
854.76
993.70
T171475CA**
TYPE 17 TRIMCLAD CYCLONE
ASSEMBLY CLIMSEAL 4
1028.60
1167.54
Code
DETAILS
PLAIN
$/1000
C/BOND
$/1000
RZM655CASQ**
ROOFZIP CYCLONE ASSEMBLY
TRIMCLAD
879.25
1018.17
ROOFZIP T17 TRIMCLAD
ROOFZIP TRIMCLAD
24
17
Services supplied
Metroline Fascia - Effective 6/07/2015
METROLINE FASCIA .55 Carins
Code
DESCRIPTION
PER
C/BOND
$/LM
Zinc
$/LM
Ultra
$/LM
55**FASCIABV
Metroline Fascia
L/M
16.01
16.48
23.99
Code
DESCRIPTION
PER
ZINC
$/EA
JOINER
Joining Sleeve
EA
3.89
Code
DESCRIPTION
PER
ZINC
$/EA
RAFTER BRACKET
Rafter Bracket
EA
3.89
Code
DESCRIPTION
PER
C/BOND
$/EA
ZINC
$/EA
MITRE**EXT
External Mitre
EA
7.61
7.96
Code
DESCRIPTION
PER
C/BOND
$/EA
ZINC
$/EA
MITRE**INT
Internal Mitre
EA
2.92
3.06
Code
DESCRIPTION
PER
ZINC
$/EA
S/CLIP
Spring Clip
EA
3.31
29
18
Services supplied
Metroline Square Gutter - Effective 6/07/2015
METROLINE SQUARE GUTTER AND ACCESSORIES
Code
DESCRIPTION
Per
C/Bond
Zinc
Ultra
55**SGUT343V
Metroline Square Gutter
L/M
16.95
16.73
24.25
Code
DESCRIPTION
PER
New
O/STRAP343SQ
Overstrap
Code
DESCRIPTION
GUTBRACK343SQ
343SQ Gutter Bracket
Code
DESCRIPTION
SEND343SQ**
30
19
3.06
PER
Zinc
$ / EA
3.06
PER
C/BOND
$/EA
Zinc
$/EA
5.11
4.48
Services supplied
150 Big Front Quad Gutter - Effective 6/07/2015
150 BIG FRONT GUTTER AND ACCESSORIES
Code
DESCRIPTION
PER
C/BOND
$/LM
ZINC
$/LM
ULTRA
$/LM
42**QGBF150V
150 Big Front Quad
Gutter
LM
16.95
16.73
25.41
SLOTTED
Code
DESCRIPTION
PER
ZINC
$/EA
GB150BF
150 B/Front Quad
Bracket
EA
3.28
Code
DESCRIPTION
PER
ZINC
$/EA
O/STRAP150QBF
Overstrap Bracket
EA
2.36
Code
DESCRIPTION
PER
GALV
$/EA
150 Big Front overstrap
SPIKE150BF
9.48
Code
DESCRIPTION
PER
C/BOND
$/EA
ZINC
$/EA
SE150BF**LH
Stop End LH
EA
6.43
6.69
SE150BF**RH
Stop End RH
EA
6.43
6.69
34
20
Services supplied
150 Half Round/Skyline Gutter - Effective 6/07/2015
150 HALF ROUND / SKYLINE GUTTER & ACCESSORIES
Code
DESCRIPTION
PER
C/BOND
$/LM
ZINC
$/LM
ULTRA
$/LM
GUTTHRDSL**V
150 Half Round Gutter
Slotted
LM
18.71
19.47
26.84
Check with your local authority for suitability of unslotted products
Code
DESCRIPTION
PER
C/BOND
$/LM
ZINC
$/LM
ULTRA
$/LM
GUTTSKYSL**V
150 Skyline Gutter
Slotted
LM
18.71
19.47
26.84
Code
DESCRIPTION
PER
C/BOND
$/EA
ZINC
$/EA
GBHR**
150 Half Round External
Bracket
EA
17.38
17.71
Code
DESCRIPTION
PER
ZINC
$/EA
CONBRACKET150SL
150 Skyline Concealed
Suspension Bracket
EA
4.39
Code
DESCRIPTION
PER
ZINC
$/EA
GBSKY
150 Skyline Overstrap
EA
2.91
"Ex Brisbane"
Code
DESCRIPTION
PER
ZINC
$/EA
DPD90HR
90 Dia Drops PVC
EA
17.10
DPD100HR
100 Dia Drops PVC
EA
19.09
37
21
Services supplied
150 Half Round/Skyline Gutter - Effective 6/07/2015
Code
DESCRIPTION
PER
C/BOND
$/EA
ZINC
$/EA
MIT150SL90EXT**
150 Skyline 90° External
Mitre
EA
40.32
42.31
MIT150SL90INT**
150 Skyline 90° Internal
Mitre
EA
40.32
42.31
Code
DESCRIPTION
PER
C/BOND
$/EA
ZINC
$/EA
SEHRLH**
150 Half Round Stop
End LH
EA
14.76
15.46
SEHRRH**
150 Half Round Stop
End RH
EA
14.76
15.46
SESLLH**
150 Skyline Stop End LH
EA
14.76
15.46
SESLRH**
150 Skyline Stop End RH
EA
14.76
15.46
Code
DESCRIPTION
PER
C/BOND
$/EA
ZINC
$/EA
MIT150HR90EXT**
150 Half Round 90°
External Mitre
EA
40.32
42.31
MIT150HR90INT**
150 Half Round 90°
Internal Mitre
EA
40.32
42.31
38
22
Services supplied
Round Downpipes - Effective 6/07/2015
Code
DESCRIPTION
SIZE
ZINC
$/EA
DPD90ZA
ROUND DROP
90
6.74
DPD100ZA
ROUND DROP
100
9.23
ROUND DROP
be charged on Net Invoice Price of Goods &
150 this Price List and will 15.70
Services supplied
PVC Downpipes
DPD150ZA - Effective 6/07/2015
PVC DOWNPIPES AND ACCESSORIES
Code
DESCRIPTION
SIZE
PRICE
$/EA
SWATTCOUP90
90mm Slip Coupling
90
10.81
SWATJUN90X90D
90mm Stormwater 'T' Junction
90
5.37
SWATNYLCLIP90
90mm Stormwater Clips
90
4.30
SWATPIP90MM
90mm Stormwater Pipe 6m
90
58.72
SWATT90FFX45D
90mm x 45° Stormwater Elbow
90
3.36
SWAT90FFX90D
90mm x 90° Stormwater Elbow
90
3.58
41
23
Services supplied
Fibreglass Building Blanket - Effective 6/07/2015
Code
FIBREGLASS BUILDING BLANKET
LWVAPA60
SIZE
PRICE
$/ROLL
60mm Light Duty Anticon Blanket 1200mm x 15 metres
229.02
covers 18m² - R1.3
Building Wraps ,Sarking & Bubble - Effective 6/07/2015
48mm x 50 metres
55.22
Services supplied
FOILTAPE493
493 Reinforced Foil Tape
Code
BUILDING WRAPS & SARKING
SIZE
PRICE
$/PACK
AGLARE533
Medium Duty Anti-Glare 533 - covers
72m²
1350mm x 60 metres
477.71
-
AGLARE753
Heavy Duty Anti-Glare - covers 72m²
1350mm x 60 metres
542.69
-
Roofing Wire - Effective 6/07/2015
BOX OF 500
57.33
Services
supplied
FOILCLIP
Foil Clip
Code
ROOFING WIRE
SIZE
PRICE
$/ROLL
SAFETYWIRE
300 x 150 x 2.0mm Roofsafe Safety
Mesh
50 metres x 1800mm
220.70
VERMONWIRE
Bird Wire- Vermin Wire
150mm x 46 metres
61.37
45
24
Services supplied
0.55mm Flashings - Effective 6/07/2015
.55mm 100 Girth Flashings
Code
0.55mm FLASHINGS
ZINC
$/LM
C/BOND
$/LM
ULTRA
$/LM
S/STEEL
$/LM
55**100G/FLV
100MM GIRTH FLAT
SHEET
7.41
7.84
12.63
17.96
55**100G/1BV
100MM GIRTH 1 BEND
9.24
9.58
15.42
19.53
55**100G/2BV
100MM GIRTH 2 BEND
11.04
11.33
18.18
21.10
55**100G/3BV
100MM GIRTH 3 BEND
12.85
13.07
20.94
22.66
55**100G/4BV
100MM GIRTH 4 BEND
14.68
14.78
23.76
24.21
55**100G/5BV
100MM GIRTH 5 BEND
16.47
16.53
26.51
25.78
55**100G/6BV
100MM GIRTH 6 BEND
18.26
18.26
29.26
27.32
Code
0.55mm FLASHINGS
ZINC
$/LM
C/BOND
$/LM
S/STEEL
$/LM
55**150G/FLV
150MM GIRTH FLAT
SHEET
9.65
10.33
25.66
55**150G/1BV
150MM GIRTH 1 BEND
11.45
12.07
27.22
55**150G/2BV
150MM GIRTH 2 BEND
13.26
13.80
28.79
55**150G/3BV
150MM GIRTH 3 BEND
15.09
15.54
30.37
55**150G/4BV
150MM GIRTH 4 BEND
16.86
17.26
31.91
55**150G/5BV
150MM GIRTH 5 BEND
18.69
19.01
33.47
55**150G/6BV
150MM GIRTH 6 BEND
20.48
20.74
35.02
Code
0.55mm FLASHINGS
ZINC
$/LM
C/BOND
$/LM
ULTRA
$/LM
S/STEEL
$/LM
55**200G/FLV
200MM GIRTH FLAT
SHEET
11.85
12.80
20.68
33.36
55**200G/1BV
200MM GIRTH 1 BEND
13.68
14.55
23.45
34.92
55**200G/2BV
200MM GIRTH 2 BEND
15.49
16.29
26.23
36.49
55**200G/3BV
200MM GIRTH 3 BEND
17.29
18.03
29.05
38.05
55**200G/4BV
200MM GIRTH 4 BEND
19.09
19.77
31.79
39.61
55**200G/5BV
200MM GIRTH 5 BEND
20.91
21.52
34.58
41.17
55**200G/6BV
200MM GIRTH 6 BEND
22.70
23.23
37.30
42.71
52
25
55**800G/3BV
800MM GIRTH 3 BEND
43.96
47.91
77.39
130.42
55**800G/4BV
800MM GIRTH 4 BEND
45.73
49.63
80.14
131.97
55**800G/5BV
800MM GIRTH 5 BEND
47.55
51.37
82.94
133.32
800MM GIRTH 6 BEND
49.37
53.10
84.28
135.10
Code
0.55mm FLASHINGS
ZINC
$/LM
C/BOND
$/LM
S/STEEL
ULTRA
$/LM
S/STEEL
$/LM
55**250G/FLV
55**300G/FLV
250MM GIRTH FLAT
300MM
SHEET
14.08
16.29
15.30
17.79
41.05
28.74
48.75
55**250G/1BV
55**300G/1BV
250MM
300MM GIRTH 1 BEND
15.89
18.12
17.05
19.53
42.62
31.51
50.32
55**250G/2BV
55**300G/2BV
250MM
300MM GIRTH 2 BEND
17.70
19.93
18.79
21.28
44.18
34.31
51.89
55**250G/3BV
55**300G/3BV
250MM
300MM GIRTH 3 BEND
19.52
21.74
20.54
23.02
45.75
37.06
53.44
55**250G/4BV
55**300G/4BV
250MM
300MM GIRTH 4 BEND
21.32
23.54
22.24
24.75
47.29
39.85
54.99
55**250G/5BV
55**300G/5BV
250MM
300MM GIRTH 5 BEND
23.11
25.36
55**250G/6BV
55**300G/6BV
250MM
300MM GIRTH 6 BEND
24.93
27.15
25.73
28.22
50.42
45.39
58.11
Code
Code
0.55mm FLASHINGS
0.55mm FLASHINGS
ZINC
$/LM
ZINC
$/LM
C/BOND
$/LM
C/BOND
$/LM
ULTRA
$/LM
S/STEEL
$/LM
S/STEEL
$/LM
55**300G/FLV
55**350G/FLV
16.29
18.52
17.79
20.29
28.74
56.46
48.75
55**300G/1BV
55**350G/1BV
300MM GIRTH FLAT
350MM
SHEET GIRTH FLAT
SHEET
300MM GIRTH 1 BEND
350MM GIRTH 1 BEND
18.12
20.34
19.53
22.02
31.51
58.02
50.32
55**300G/2BV
55**350G/2BV
300MM
56 GIRTH 2 BEND
350MM GIRTH 2 BEND
19.93
22.15
21.28
23.77
34.31
59.58
51.89
55**300G/3BV
55**350G/3BV
300MM GIRTH 3 BEND
350MM GIRTH 3 BEND
21.74
23.96
23.02
25.51
37.06
61.13
53.44
55**300G/4BV
55**350G/4BV
300MM GIRTH 4 BEND
350MM GIRTH 4 BEND
23.54
25.76
24.75
27.24
39.85
62.70
54.99
55**300G/5BV
55**350G/5BV
300MM GIRTH 5 BEND
350MM GIRTH 5 BEND
25.36
27.57
26.48
28.99
42.60
64.26
56.56
55**300G/6BV
55**350G/6BV
300MM GIRTH 6 BEND
350MM GIRTH 6 BEND
27.15
29.35
28.22
30.64
45.39
65.81
58.11
Code
Code
0.55mm FLASHINGS
0.55mm FLASHINGS
ZINC
$/LM
ZINC
$/LM
C/BOND
$/LM
C/BOND
$/LM
S/STEEL
$/LM
ULTRA
$/LM
S/STEEL
$/LM
55**350G/FLV
55**400G/FLV
18.52
20.74
20.29
22.77
56.46
36.78
64.16
55**350G/1BV
55**400G/1BV
350MM GIRTH FLAT
400MM
SHEET GIRTH FLAT
SHEET
350MM GIRTH 1 BEND
400MM GIRTH 1 BEND
20.34
22.55
22.02
24.51
58.02
39.56
65.73
55**350G/2BV
55**400G/2BV
350MM GIRTH 2 BEND
400MM GIRTH 2 BEND
22.15
24.37
23.77
26.26
59.58
42.38
67.28
55**350G/3BV
55**400G/3BV
350MM GIRTH 3 BEND
400MM GIRTH 3 BEND
23.96
26.20
25.51
28.00
61.13
45.14
68.83
55**350G/4BV
55**400G/4BV
350MM GIRTH 4 BEND
400MM GIRTH 4 BEND
25.76
27.96
27.24
29.71
62.70
47.91
70.39
55**350G/5BV
55**400G/5BV
350MM GIRTH 5 BEND
400MM GIRTH 5 BEND
27.57
29.79
28.99
31.45
64.26
50.68
71.96
55**350G/6BV
55**400G/6BV
350MM GIRTH 6 BEND
400MM GIRTH 6 BEND
29.35
31.59
30.64
33.18
65.81
53.43
73.52
Code
0.55mm FLASHINGS
ZINC
$/LM
C/BOND
$/LM
ULTRA
$/LM
S/STEEL
$/LM
55**400G/FLV
400MM GIRTH FLAT
SHEET
20.74
22.77
36.78
64.16
55**400G/1BV
400MM GIRTH 1 BEND
22.55
24.51
39.56
65.73
55**400G/2BV
400MM
53 GIRTH 2 BEND
24.37
26.26
42.38
67.28
55**400G/3BV
400MM GIRTH 3 BEND
26.20
28.00
45.14
68.83
55**400G/4BV
400MM26
GIRTH 4 BEND
27.96
29.71
47.91
70.39
55**800G/6BV
Services supplied
250 Girth Flashings
.55mm 300
23.99
48.85
26.48
42.60
56.56
Services supplied
55**350G/3BV
350MM GIRTH 3 BEND
23.96
25.51
61.13
55**350G/4BV
350MM GIRTH 4 BEND
25.76
27.24
62.70
55**350G/5BV
350MM GIRTH 5 BEND
27.57
28.99
64.26
350MM GIRTH 6 BEND
29.35
30.64
65.81
Code
0.55mm FLASHINGS
ZINC
$/LM
C/BOND
$/LM
ULTRA
$/LM
S/STEEL
$/LM
55**400G/FLV
55**500G/FLV
400MM
500MM GIRTH FLAT
SHEET
20.74
25.17
22.77
27.73
36.78
44.85
64.16
79.55
55**400G/1BV
55**500G/1BV
400MM
500MM GIRTH 1 BEND
22.55
27.00
24.51
29.49
39.56
47.64
65.73
81.11
55**400G/2BV
55**500G/2BV
400MM
500MM GIRTH 2 BEND
24.37
28.79
26.26
31.23
42.38
50.40
67.28
82.65
55**400G/3BV
55**500G/3BV
400MM
500MM GIRTH 3 BEND
26.20
30.62
28.00
32.97
45.14
53.21
68.83
84.24
55**400G/4BV
55**500G/4BV
400MM
500MM GIRTH 4 BEND
27.96
32.42
29.71
34.70
47.91
55.93
70.39
85.79
55**400G/5BV
400MM
500MM GIRTH 5 BEND
29.79
34.23
55**400G/6BV
55**500G/6BV
400MM
500MM GIRTH 6 BEND
31.59
36.03
33.18
38.17
53.43
61.48
73.52
88.90
Code
Code
0.55mm FLASHINGS
0.55mm FLASHINGS
ZINC
$/LM
ZINC
$/LM
C/BOND
$/LM
C/BOND
$/LM
S/STEEL
$/LM
ULTRA
$/LM
S/STEEL
$/LM
55**450G/FLV
55**600G/FLV
22.97
29.63
25.27
32.72
71.85
52.93
94.60
55**450G/1BV
55**600G/1BV
450MM GIRTH FLAT
600MM GIRTH FLAT
SHEET
SHEET
450MM GIRTH 1 BEND
600MM GIRTH 1 BEND
24.76
31.44
27.01
34.47
73.39
55.69
96.49
55**450G/2BV
55**600G/2BV
450MM
53 GIRTH 2 BEND
600MM GIRTH 2 BEND
26.59
33.25
28.75
36.22
74.97
58.47
98.07
55**450G/3BV
55**600G/3BV
450MM GIRTH 3 BEND
600MM GIRTH 3 BEND
27.89
35.07
30.49
37.95
76.55
61.61
99.64
55**450G/4BV
55**600G/4BV
450MM GIRTH 4 BEND
600MM GIRTH 4 BEND
30.20
36.86
32.21
39.68
78.10
63.97
101.18
450MM GIRTH 5 BEND
600MM GIRTH 5 BEND
32.01
38.69
55**450G/6BV
55**600G/6BV
450MM GIRTH 6 BEND
600MM GIRTH 6 BEND
33.80
40.46
35.67
43.16
81.19
69.56
104.28
Code
Code
Code
0.55mm FLASHINGS
0.55mm FLASHINGS
0.55mm FLASHINGS
55**500G/FLV
55**800G/FLV
55**700G/FLV
55**500G/1BV
55**800G/1BV
55**700G/1BV
55**500G/2BV
55**800G/2BV
55**700G/2BV
55**500G/3BV
55**800G/3BV
55**700G/3BV
55**500G/4BV
55**800G/4BV
55**700G/4BV
55**500G/5BV
55**800G/5BV
55**700G/5BV
55**500G/6BV
55**800G/6BV
55**700G/6BV
500MM GIRTH FLAT
800MM GIRTH FLAT
SHEET
700MM GIRTH FLAT
SHEET
500MM
SHEETGIRTH 1 BEND
800MM GIRTH 1 BEND
700MM GIRTH 1 BEND
500MM GIRTH 2 BEND
800MM GIRTH 2 BEND
700MM GIRTH 2 BEND
500MM GIRTH 3 BEND
800MM GIRTH 3 BEND
700MM GIRTH 2 BEND
500MM GIRTH 4 BEND
800MM GIRTH 4 BEND
700MM GIRTH 4 BEND
500MM GIRTH 5 BEND
800MM GIRTH 5 BEND
700MM GIRTH 5 BEND
500MM GIRTH 6 BEND
800MM GIRTH 6 BEND
700MM GIRTH 6 BEND
ZINC
ZINC
$/LM
$/LM
ZINC
$/LM
25.17
C/BOND
C/BOND
$/LM
$/LM
C/BOND
$/LM
27.73
ULTRA
ULTRA
$/LM
$/LM
ULTRA
$/LM
44.85
S/STEEL
S/STEEL
$/LM
$/LM
S/STEEL
$/LM
79.55
Code
Code
0.55mm FLASHINGS
0.55mm FLASHINGS
ZINC
ZINC
$/LM
$/LM
C/BOND
C/BOND
$/LM
$/LM
ULTRA
S/STEEL
$/LM
$/LM
S/STEEL
$/LM
55**600G/FLV
55**250G/FLV
29.63
14.08
32.72
15.30
52.93
41.05
94.60
55**600G/1BV
55**250G/1BV
600MM GIRTH FLAT
250MM GIRTH FLAT
SHEET
SHEET
600MM GIRTH 1 BEND
250MM GIRTH 1 BEND
31.44
15.89
34.47
17.05
55.69
42.62
96.49
55**600G/2BV
55**250G/2BV
600MM GIRTH 2 BEND
250MM
54 GIRTH 2 BEND
33.25
17.70
36.22
18.79
58.47
44.18
98.07
55**600G/3BV
55**250G/3BV
600MM GIRTH 3 BEND
250MM GIRTH 3 BEND
35.07
19.52
37.95
20.54
61.61
45.75
99.64
55**600G/4BV
55**250G/4BV
600MM GIRTH 4 BEND
250MM27
GIRTH 4 BEND
36.86
21.32
39.68
22.24
63.97
47.29
101.18
55**350G/6BV
Services supplied
.55mm 400
500 Girth Flashings
55**500G/5BV
0.55mm
Flashings - Effective 6/07/2015
31.45
50.68
71.96
58.67
this Price36.44
List and will be charged
on Net Invoice Price 87.36
of Goods &
Services supplied
55**450G/5BV
0.55mm
Flashings - Effective 6/07/2015
55**600G/5BV
38.52
34.07
27.00
40.31
35.87
28.79
42.13
37.69
30.62
43.96
39.51
32.42
45.73
41.30
34.23
47.55
43.12
36.03
49.37
44.92
33.96
79.65
41.42
66.68
102.74
Services supplied
42.70
37.72
29.49
44.42
39.45
31.23
46.17
41.18
32.97
47.91
42.93
34.70
49.63
44.66
36.44
51.37
46.41
38.17
53.10
48.12
69.00
60.95
47.64
71.82
63.75
50.40
74.60
66.53
53.21
77.39
69.50
55.93
80.14
72.05
58.67
82.94
74.80
61.48
84.28
75.26
125.71
110.33
81.11
127.30
111.45
82.65
128.86
113.46
84.24
130.42
115.02
85.79
131.97
116.58
87.36
133.32
118.14
88.90
135.10
119.68
55**500G/3BV
500MM GIRTH 3 BEND
30.62
32.97
53.21
84.24
55**500G/4BV
500MM GIRTH 4 BEND
32.42
34.70
55.93
85.79
55**500G/5BV
500MM GIRTH 5 BEND
34.23
36.44
58.67
87.36
500MM GIRTH 6 BEND
36.03
38.17
61.48
88.90
Code
0.55mm FLASHINGS
ZINC
$/LM
C/BOND
$/LM
S/STEEL
ULTRA
$/LM
S/STEEL
$/LM
55**900G/FLV
55**600G/FLV
900MM GIRTH FLAT
600MM
SHEET
42.95
29.63
47.65
32.72
141.13
52.93
94.60
55**900G/1BV
55**600G/1BV
900MM
600MM GIRTH 1 BEND
44.78
31.44
49.39
34.47
142.69
55.69
96.49
55**900G/2BV
55**600G/2BV
900MM
600MM GIRTH 2 BEND
46.58
33.25
51.14
36.22
144.24
58.47
98.07
55**900G/3BV
55**600G/3BV
900MM
600MM GIRTH 3 BEND
48.38
35.07
52.88
37.95
145.81
61.61
99.64
55**900G/4BV
55**600G/4BV
900MM
600MM GIRTH 4 BEND
50.19
36.86
54.61
39.68
147.37
63.97
101.18
55**900G/5BV
55**600G/5BV
900MM
600MM GIRTH 5 BEND
51.99
38.69
55**900G/6BV
55**600G/6BV
900MM
600MM GIRTH 6 BEND
53.81
40.46
58.09
43.16
150.48
69.56
104.28
Code
Code
0.55mm FLASHINGS
0.55mm FLASHINGS
ZINC
ZINC
$/LM
$/LM
C/BOND
C/BOND
$/LM
$/LM
S/STEEL
ULTRA
$/LM
$/LM
S/STEEL
$/LM
55**450G/FLV
55**1000GFLV
55**700G/FLV
22.97
47.38
34.07
25.27
52.65
37.72
71.85
85.62
60.95
156.51
110.33
55**450G/1BV
55**1000G1BV
55**700G/1BV
450MM GIRTH FLAT
1000MM
GIRTH FLAT
FLAT
700MM
SHEET GIRTH
SHEET
SHEET
450MM GIRTH 1 BEND
1000MM
GIRTH 11 BEND
BEND
700MM GIRTH
24.76
49.20
35.87
27.01
54.38
39.45
73.39
87.88
63.75
158.07
111.45
55**450G/2BV
55**1000G2BV
55**700G/2BV
450MM GIRTH 2 BEND
1000MM
GIRTH 22 BEND
BEND
700MM GIRTH
26.59
51.03
37.69
28.75
56.12
41.18
74.97
90.70
66.53
159.65
113.46
55**450G/3BV
55**1000G3BV
55**700G/3BV
450MM GIRTH 3 BEND
1000MM
GIRTH 23 BEND
BEND
700MM GIRTH
27.89
52.83
39.51
30.49
57.89
42.93
76.55
93.47
69.50
161.21
115.02
55**450G/4BV
55**1000G4BV
55**700G/4BV
450MM GIRTH 4 BEND
1000MM
GIRTH 44 BEND
BEND
700MM GIRTH
30.20
54.62
41.30
32.21
59.59
44.66
78.10
96.23
72.05
162.76
116.58
55**450G/5BV
55**1000G5BV
55**700G/5BV
450MM GIRTH 5 BEND
1000MM
GIRTH 55 BEND
BEND
700MM GIRTH
32.01
56.44
43.12
33.96
61.34
46.41
79.65
99.01
74.80
164.32
118.14
55**450G/6BV
55**1000G6BV
55**700G/6BV
450MM GIRTH 6 BEND
1000MM
GIRTH 66 BEND
BEND
700MM GIRTH
33.80
58.24
44.92
35.67
63.07
48.12
81.19
101.78
75.26
165.88
119.68
Code
Code
0.55mm FLASHINGS
0.55mm FLASHINGS
ZINC
ZINC
$/LM
$/LM
C/BOND
C/BOND
$/LM
$/LM
ULTRA
ULTRA
$/LM
$/LM
S/STEEL
S/STEEL
$/LM
$/LM
55**800G/FLV
55**1200GFLV
38.52
56.28
42.70
62.60
69.00
101.21
125.71
187.31
55**800G/1BV
55**1200G1BV
800MM GIRTH FLAT
1200MM
SHEET GIRTH FLAT
SHEET
800MM GIRTH 1 BEND
1200MM GIRTH 1 BEND
40.31
58.07
44.42
64.33
71.82
104.07
127.30
188.87
55**800G/2BV
55**1200G2BV
800MM
54 GIRTH 2 BEND
1200MM GIRTH 2 BEND
42.13
59.91
46.17
66.07
74.60
106.79
128.86
190.44
55**800G/3BV
55**1200G3BV
800MM GIRTH 3 BEND
1200MM GIRTH 3 BEND
43.96
61.72
47.91
67.81
77.39
109.57
130.42
192.01
55**800G/4BV
55**1200G4BV
800MM GIRTH 4 BEND
1200MM GIRTH 4 BEND
45.73
63.50
49.63
69.55
80.14
112.35
131.97
193.55
55**800G/5BV
55**1200G5BV
800MM GIRTH 5 BEND
1200MM GIRTH 5 BEND
47.55
65.32
51.37
71.29
82.94
115.17
133.32
195.11
55**800G/6BV
55**1200G6BV
800MM GIRTH 6 BEND
1200MM GIRTH 6 BEND
49.37
67.11
53.10
73.02
84.28
117.88
135.10
196.68
Code
0.55mm FLASHINGS
ZINC
$/LM
C/BOND
$/LM
S/STEEL
$/LM
55**250G/FLV
250MM GIRTH FLAT
SHEET
14.08
15.30
41.05
55**250G/1BV
250MM GIRTH 1 BEND
15.89
17.05
42.62
55**250G/2BV
250MM
55 GIRTH 2 BEND
17.70
18.79
44.18
55**250G/3BV
250MM GIRTH 3 BEND
19.52
20.54
45.75
55**250G/4BV
250MM28
GIRTH 4 BEND
21.32
22.24
47.29
55**500G/6BV
Services supplied
900 Girth Flashings
.55mm 600
56.35
148.94
41.42
66.68
102.74
Services supplied
1000Girth
GirthFlashings
Flashings
.55mm 700
Services supplied
Code
0.55mm FLASHINGS
ZINC
$/LM
C/BOND
$/LM
S/STEEL
$/LM
55**900G/FLV
900MM GIRTH FLAT
SHEET
42.95
47.65
141.13
55**900G/1BV
900MM GIRTH 1 BEND
44.78
49.39
142.69
55**900G/2BV
900MM GIRTH 2 BEND
46.58
51.14
144.24
55**900G/3BV
900MM GIRTH 3 BEND
48.38
52.88
145.81
55**900G/4BV
900MM GIRTH 4 BEND
50.19
54.61
147.37
55**900G/5BV
900MM GIRTH 5 BEND
51.99
56.35
148.94
55**900G/6BV
900MM GIRTH 6 BEND
53.81
58.09
150.48
Code
0.55mm FLASHINGS
ZINC
$/LM
C/BOND
$/LM
ULTRA
$/LM
S/STEEL
$/LM
55**1000GFLV
1000MM GIRTH FLAT
SHEET
47.38
52.65
85.62
156.51
55**1000G1BV
1000MM GIRTH 1 BEND
49.20
54.38
87.88
158.07
55**1000G2BV
1000MM GIRTH 2 BEND
51.03
56.12
90.70
159.65
55**1000G3BV
1000MM GIRTH 3 BEND
52.83
57.89
93.47
161.21
55**1000G4BV
1000MM GIRTH 4 BEND
54.62
59.59
96.23
162.76
55**1000G5BV
1000MM GIRTH 5 BEND
56.44
61.34
99.01
164.32
55**1000G6BV
1000MM GIRTH 6 BEND
58.24
63.07
101.78
165.88
Code
0.55mm FLASHINGS
ZINC
$/LM
C/BOND
$/LM
ULTRA
$/LM
S/STEEL
$/LM
55**1200GFLV
1200MM GIRTH FLAT
SHEET
56.28
62.60
101.21
187.31
55**1200G1BV
1200MM GIRTH 1 BEND
58.07
64.33
104.07
188.87
55**1200G2BV
1200MM GIRTH 2 BEND
59.91
66.07
106.79
190.44
55**1200G3BV
1200MM GIRTH 3 BEND
61.72
67.81
109.57
192.01
55**1200G4BV
1200MM GIRTH 4 BEND
63.50
69.55
112.35
193.55
55**1200G5BV
1200MM GIRTH 5 BEND
65.32
71.29
115.17
195.11
55**1200G6BV
1200MM GIRTH 6 BEND
67.11
73.02
117.88
196.68
55
29
Services supplied
Dektites - Effective 6/07/2015
Code
SIZE
BLACK
$/EA
GREY & RED
$/EA
ROOFCOLLARB1
5-55mm
16.88
19.56
ROOFCOLLARB2
50-70mm
21.36
25.45
ROOFCOLLARB4
50-120mm
29.73
34.16
ROOFCOLLARB5
110-170mm
36.87
44.04
ROOFCOLLARB6
160-220mm
66.60
74.61
ROOFCOLLARB7
160-300mm
85.87
The Goods and Services Tax
(GST) is an additional to99.61
the prices in
Fillers - Effective 6/07/2015
Services supplied
ROOFCOLLARB9
290-440mm
144.99
159.77
Code
PRODUCT
LENGTH
PRICE
915mm
INFILL/CORO
Corodek® Eaves Filler Strips
915mm
5.68
Code
PRODUCT
LENGTH
PRICE
950mm
INFILL/TRIMB
Trimclad® Eaves Filler Strips
(bottom)
950mm
5.69
Services supplied
Trimclad® Eaves Filler Strips (Top)
950mm
7.81
Paint and Sealants - Effective 6/07/2015
INFILLTRIMT
Code
PRODUCT
PRICE
SILCLEAR300
Silicone Sealant - Clear 300g Cartridge
10.98
SILGREY300
Silicone Sealant - Grey 300g Cartridge
10.98
TUP-**
Spray Paint Colorbond (150g Aerosol)
23.51
61
30
Effective from 7th July 2008
CUSTOM FLASHINGS
ORDERING RECOMMENDATION
1.
2.
3.
4.
Choose the appropriate profile Type No. material thickness and finish
Should Colorbond be required, nominate on which side of the colour is to be.
With each letter shown nominate the measurement you require.
Advise the quantity and length applicable to each profile.
8-1
31
66Section
Services supplied
Vents and Skylights - Effective 6/07/2015
ROOFVENT
Code
DESCRIPTION
Coloured
$/EA
Plain
$/EA
ROOFVENT300**
300mm Rotary Ventilator
194.95
168.63
ROOFVENT410**
410mm Rotary Ventilator (Head Only)
487.09
440.35
ROOFVENT600**
600mm Rotary Ventilator (Head Only)
1564.69
1226.75
73
32
Services supplied
Stud, Battens and Trim Angle - Effective 6/07/2015
STEEL BUILDING FRAME COMPONENTS
Code
PRODUCT
BMT
PRICE
$/LM
STDSTUDD-75V
Standard Stud 75 x 32
0.75
7.05
STDSTUDD-10V
1.0
9.23
STDSTUDD-12V
1.2
10.94
STDSTUDD-16V
1.6
14.60
75HIGHPLATEV
High Plate 78 x 68
0.75
16.56
10HIGHPLATEV
High Plate 78 x 68
1.0
15.60
12HIGHPLATEV
High Plate 78 x 68
1.2
17.37
16HIGHPLATEV
High Plate 78 x 68
1.6
25.42
Code
PRODUCT
BMT
PRICE
$/LM
TOPHCNS6475V
Top Hat Batten 64
0.75
18.93
TOPHCNS6410V
Top Hat Batten 64
1.00
20.04
TOPHAT10075V
Tophat Batten 100
0.75
25.28
TOPHAT10010V
Tophat Batten 100
1.0
26.40
TOPHAT10012V
Tophat Batten 100
1.2
30.96
TOPHAT12070V
Top Hat Batten 120
0.70
38.54
TOPHAT12090V
Top Hat Batten 120
0.90
48.23
Code
PRODUCT
BMT
PRICE
$/LM
CBZA61
Ceiling Batten 6100mm stock length
0.42
24.10
RB4075
40mm Roof Battens
0.75
86.87
ROOFBATCN40V
40mm Cyclonic Roof Battens
0.75
11.58
Code
PRODUCT
BMT
PRICE
$/EA
TRIMANGLE/60
Trim Angle 38 x 38<br>Stock Lengths
- 6.0m EACH
1.20
95.98
74
33
Services supplied
Purlins - Effective 6/07/2015
PURLINS C OR Z
Code
SECTION
AVAILBILITY
WEIGHT KG/M
GALV
$/LM
C10010-PURLV
C or Z 10010
M
1.75
22.15
C10012-PURLV
C or Z 10012
M
2.05
27.36
C10015-PURLV
C or Z 10015
M
2.6
28.23
C10019-PURLV
C or Z 10019
M
3.28
33.95
C15012-PURLV
C or Z 15012
M
2.86
34.19
C15015-PURLV
C or Z 15015
M
3.57
37.76
C15019-PURLV
C or Z 15019
M
4.51
45.74
C15024-PURLV
C or Z 15024
M
5.62
55.74
C20015-PURLV
C or Z 20015
M
4.49
46.00
C20019-PURLV
C or Z 20019
M
5.74
56.09
C20024-PURLV
C or Z 20024
M
7.21
70.92
C25019-PURLV
C or Z 25019
M
6.5
67.06
C25024-PURLV
C or Z 25024
M
8.17
81.94
C30024-PURLV
C or Z 30024
M
10.18
116.23
C30030-PURLV
C or Z 30030
**
12.69
144.10
C35024-PURLV
C or Z 35024
**
12.24
137.32
C35030-PURLV
C or Z 35030
**
15.16
165.52
C40024-PURLV
C or Z 40024
**
16.04
167.48
C40030-PURLV
C or Z 40030
**
18.7
205.76
** = Ex Brisbane or Sydney, Freight Charges Apply. M = Manufacured by branch
Hole Centres - Sections are normally supplied with 18 x 22 elongated holes punched to AISC gauge lines as
showing in detail. Punching to non AISC standard is also available on special request. Weights are approximate
only.
76
34
Services supplied
Purlins - Effective 6/07/2015
SAFE BRIDGE PURLINS C OR Z
Code
SECTION
GALV
$/LM
SBC15012PURV
C or Z 15012
34.19
SBC15015PURV
C or Z 15015
37.76
SBC15019PURV
C or Z 15019
45.75
SBC15024PURV
C or Z 15024
55.74
SBC20015PURV
C or Z 20015
46.00
SBC20019PURV
C or Z 20019
56.09
SBC20024PURV
C or Z 20024
70.92
SBC25019PURV
C or Z 25019
67.06
SBC25024PURV
C or Z 25024
81.95
SBC30024PURV
C or Z 30024
116.23
SBC30030PURV
C or Z 30030
144.09
SBC35024PURV
C or Z 35024
137.32
SBC35030PURV
C or Z 35030
165.52
SBC40024PURV
C or Z 40024
167.48
SBC40030PURV
C or Z 40030
205.77
*Ex Townsvile or Brisbane, Freight Charges Apply
NESTING CHANNEL
Code
SECTION
GALV
$/LM
NESTC10415-V
104 x 60 x 1.5
28.23
NESTC15415-V
154 x 70 x 1.5
37.76
NESTC15419-V
154 x 70 x 1.9
45.74
NESTC20419-V
204 x 70 x 1.9
56.09
NESTC25719-V
257 x 70 x 1.9
67.06
77
35
Services supplied
Bridging - Effective 6/07/2015
Code
DESCRIPTION
GALV
$/EA
RBCC***BRIDV
Ridge Clamp / Clamp
253.84
RBLL***BRIDV
Ridge Locator / Locator
253.84
RBBB***BRIDV
Ridge Bolted / Bolted
253.84
Code
DESCRIPTION
GALV
$/LM
FBL******BRV
Fascia / Locator / Fascia
59.77
FBC******BRV
Fascia / Clamp / Fascia
59.77
FBB******BRV
Fascia / Bolted / Bolted
59.77
Code
DESCRIPTION
GALV
$/EA
GGHC***BRIDV
Girt Hanger Clamp
138.76
GGHL***BRIDV
Girt Hanger Locator
138.76
GGHB***BRIDV
Girt Hanger Bolted
138.76
Code
DESCRIPTION
GALV
$/EA
GGFC***BRIDV
Girt Foot Clamp
138.76
GGFL***BRIDV
Girt Foot Locator
138.76
GGFB***BRIDV
Girt Foot Bolted
138.76
Code
DESCRIPTION
GALV
$/LM
IBLC***BRIDV
Intermediate Locator / Clamp
38.53
IBLC***SBRIV
Swivel Locator / Clamp
39.59
Code
DESCRIPTION
GALV
$/LM
IBCC***BRIDV
Intermediate Clamp / Clamp
38.53
IBCC***SBRIV
Swivel Clamp / Clamp
39.59
INTERMEDIATE BRIDGING
79
36
Services supplied
Bridging - Effective 6/07/2015
Code
DESCRIPTION
GALV
$/LM
IBCB***BRIDV
Intermediate Clamp / Bolt
38.53
IBCB***SBRIV
Swivel Clamp / Bolt
39.59
Code
DESCRIPTION
GALV
$/LM
IBBB***BRIDV
Intermediate Bolt / Bolt
38.53
IBBB***SBRIV
Swivel Bolt / Bolt
39.59
INTBRIDG300V-305V
Heavy Duty Bolt / Bolt (300-400 Purlin Range)
116.24
Code
DESCRIPTION
GALV
$/EA
SBBRIDGE4/6*
Safebridge Adjustable Bridging 410-610 mm
44.06
-
SBBRIDGE6/9*
Safebridge Adjustable Bridging 610-910 mm
44.06
-
SBBRACKET
Safebridge Support Bracket
10.85
-
SAFEBRIDGE
*Ex Townsville or Brisbane, Freight Charges Apply
Code
DESCRIPTION
GALV
$/LM
IBLB***BRIDV
Intermediate Locator / Bolt
38.53
IBLB***SBRIV
Swivel Clamp / Bolt
39.59
80
37
Services supplied
Brackets and Plates - Effective 6/07/2015
Code
DETAILS
PER
PRICE
$/EA
GPB/100
Genreal Purpose Bracket - 100
EA
16.42
GPB/150
EA
18.07
GPB/200
EA
24.15
GPB/250
EA
29.16
Code
DETAILS
PER
PRICE
$/EA
AC/100
Angle Connector - 100
EA
13.21
AC/150
EA
14.41
AC/200
EA
17.88
AC/250
EA
21.19
Code
DETAILS
PER
PRICE
$/EA
CP/100
Clamp Plate - 100
EA
10.45
CP/150
Clamp Plate - 150
EA
12.59
CP/200
Clamp Plate - 200
EA
14.91
CP/250
Clamp Plate - 250
EA
15.87
Code
DETAILS
PER
PRICE
$/EA
CL/100
Universal Cleats - 100
EA
15.24
CL/150
EA
18.21
CL/200
EA
20.87
CL/250
EA
23.50
Code
DETAILS
PER
PRICE
$/100
12X30PB46
12 x 30 Purlin Bolt/Nut/Washer GR
4.6
100
269.36
12X30PB88
12 x 30 H/S Purlin Bolt/Nur/Washer
GR 8.8
100
658.76
81
38
Services supplied
Brackets and Plates - Effective 6/07/2015
Code
DETAILS
PER
PRICE
$/100
12X30FB46
12 x 30 Fascia Bolt/Nut/Washer GR
4.6
100
269.36
82
39
Building Products
Metroll Purlins, Bridging & Accessories
Detailing and Installation Guide
TYPICAL BRIDGING ASSEMBLY ARRANGEMENT
99
41 15
B
B
C
O/ALL
ETC
O/ALL
RUNNING
ADDING
Section
HOLE TYPE:
Mark
No.
No.
Off
A
CLEAT
OR BRIDGING - B/R
O/all
A/B
FLANGE AND
WEB HOLES
100
42
ADDING
RUNNING
ADDING
RUNNING
ADDING
RUNNING
ADDING
RUNNING
ADDING
16
M
N
Hole
Centre
400 = 310mm
L
RUNNING
K
350 = 260mm
J
ADDING
I
300 = 210mm
H
RUNNING
G
250 = 160mm
F
Date Required
ADDING
E
of
Date of Order
Customer’s
Order No.
Purchase Order No.
200 = 110mm
D
Sheet
Delivery Instruction
RUNNING
C
Customer
Please show dimensions Left to Right – Lengths from Longest to Shortest
150 = 60mm
B
56 Keane St.,
Currajong Qld. 4812
Telephone: (07) 4779 8266
Facsimile: (07) 4775 1835
Kenny St., Portsmith,
P.O. Box 7574,
Cairns Qld. 4870
Telephone: (07) 4035 4900
Facsimile: (07) 4035 4999
ADDING
A
TOWNSVILLE
CAIR NS
100 = 40mm
C
CENTRE
HOLE
Cnr. Boundary & Carroll Sts.,
Toowoomba Qld. 4350
Telephone: (07) 4634 6144
Facsimile: (07) 4633 1936
411 Freeman Road,
Richlands Qld. 4077
P.O. Box 106
Richlands Qld. 4077
Telephone: (07) 3375 0100
Facsimile: (07) 3375 0150
Z& C Section Cutting & Punching Schedule
TOOWOOMBA
BRISBANE
RUNNING
B
FLANGE
HOLES
CIRCLE DIMENSIONS FOR FLANGE HOLES
A
A
C
ETC
PLEASE HIGHLIGHT IF NON STANDARD HOLE CENTRE REQUIRED
DRAFTING OFFICE
CUSTOMER
DELIVERY ADDRESS
PAGE
OF
ORDER NUMBER
DATE REQUIRED
PLAN No.
INTERMEDIATE BRIDGING AND FASCIA BRIDGING
INTERMEDIATE BRIDGING
CODE
PURLIN SIZE
QUANTITY
LENGTH
MARK No.
IBLC200
200
50
1200
B1
CODE
PURLIN SIZE
QUANTITY
LENGTH
MARK No.
20019
6
1000
FBZ
IBLC***BRIDV Intermediate
Bridging Locator / Clamp
IBLB***BRIDV Intermediate
Bridging Locator / Bolt
EXAMPLE
IBCC***BRIDV Intermediate
Bridging Clamp / Clamp
IBCB***BRIDV Intermediate
Bridging Clamp / Bolt
IBBB***BRIDV Intermediate
Bridging Bolted / Bolted
For Swivel Intermediate
Bridging add “S” to Code No.
FASCIA BRIDGING
Locator End
Plain Channel
Slotted Channel
Fascia
Bracket
FBL * * * * * *BRIDV
Fascia Bridging/Locator/Purlin Size
EXAMPLE
FBL23019
Clamp End
Plain Channel
Slotted Channel
Fascia
Bracket
FBC * * * * * *BRIDV
Fascia Bridging/Clamp/Purlin Size
Bolted Bracket
Plain Channel
Slotted Channel
Fascia
Bracket
FBB * * * * * *BRIDV
Fascia Bridging/Bolted Bracket/Purlin Size
Roof Pitch is
°
Fascia Size: 100 150 200 230 250 260 OTHER
Indicate Fascia Purlin Size and Adjoining Purlin Size include in Code, ie FBL230200BRIDV
101
43 17
DRAFTING OFFICE
CUSTOMER
DELIVERY ADDRESS
PAGE
OF
ORDER NUMBER
DATE REQUIRED
PLAN No.
RIDGE BRIDGING – GIRT HANGERS AND GIRT FOOT
RIDGE BRIDGING
CODE
PURLIN SIZE
QUANTITY
LENGTH
MARK No.
RBC150
150
4
450
RZ
CODE
PURLIN SIZE
QUANTITY
LENGTH
MARK No.
GFL150
150
4
280
GI
CODE
PURLIN SIZE
QUANTITY
LENGTH
MARK No.
150
10
460
SI
Clamp End
Turnbuckle
RBC * * *BRIDV
Clamp End
EXAMPLE
Locator End
RBL * * *BRIDV
Turnbuckle
Locator End
Bolted Bracket
Turnbuckle
RBB * * *BRIDV
Bolted Bracket
GIRT FOOT
Locator
End
Clamp
End
Slotted
Channel
Slotted
Channel
Angle
Connector
Angle
Connector
GFL* * *BRIDV
GFC* * *BRIDV
Bolted
Bracket
EXAMPLE
Slotted
Channel
Angle
Connector
GFB* * *BRIDV
GIRT HANGERS
Turnbuckle
Turnbuckle
Slotted
Channel
Turnbuckle
Slotted
Channel
EXAMPLE
GHB150
Locator
End
Clamp
End
GHC* * *BRIDV
GHL* * *BRIDV
Slotted
Channel
Bolted
Bracket
GHB* * *BRIDV
18 44
102
Section
45 13 - 7
105
SPAN CHARTS
QUICK SELECTION CHARTS
The following tables are based on design wind velocity 44 metres per second for a 50 year return period. Select
purlins and girts based on this information to be used with steel roof and wall claddings. This table is a guide
only and all sizes should be fully calculated. Spacing equals the maximum purlin or girt internal spacing. This
figure corresponds to the maximum internal span of appropriate Metroll roof or wall cladding.
C PURLINS
C GIRTS
MAX (MM)
PURLIN SPACING
SPAN (MM)
1200
.42 CORODEK®
1700
.42
TRIMCLAD®
MAX (MM)
PURLIN SPACING
SPAN (MM)
1800
.42
CORODEK®
2400
.42
TRIMCLAD®
3000
3300
3600
3900
4200
4500
4800
5100
5400
5700
6000
6300
6600
6900
7200
7500
7800
8100
8400
8700
9000
9300
9600
C10015
C15015
C15015
C15015
*C10019
*C10019
*C15015
*C15015
•C15015
•C15015
•C15019
•C15024
•C20015
*C20015
*C20019
*C20019
**C20019
**C20019
**C20019
**C20024
**C20024
-
C15015
C15015
C15019
C15015
*C15015
*C15015
*C15015
*C15015
*C15015
*C15024
*C15024
*C20015
*C20019
*C20019
*C20024
*C20024
**C20024
**C20024
-
3000
3300
3600
3900
4200
4500
4800
5100
5400
5700
6000
6300
6600
6900
7200
7500
7800
8100
8400
8700
9000
9300
9600
C10015
C15015
*C10015
*C10015
*C10015
**C10015
**C10015
**C10015
**C10019
*C15015
**C15015
**C15015
**C15015
**C15015
**C15019
**C15019
**C15024
**C20015
**C20015
**C20019
**C20019
**C20024
**C20024
C10015
C15015
*C10015
*C10015
**C10015
**C10015
**C10019
*C15015
*C15015
**C15015
**C15015
**C15015
**C15019
**C15024
**C15024
**C200115
**C20015
**C20019
**C20019
**C20024
**C20024
-
MAX (MM)
PURLIN SPACING
SPAN (MM)
1200
900
600
450
LAP (MM)
Z PURLINS
KEY:
NOTERS:
3000
3300
3600
3900
4200
4500
4800
5100
5400
5700
6000
6300
6600
6900
7200
7500
7800
8100
8400
8700
9000
9300
9600
9900
10200
10500
10800
11100
11400
12000
Z GIRTS
1200
.42
CORODEK®
Z10015
Z10015
Z10015
Z10019
Z10019
Z15015
Z15015
Z15015
Z10019
*Z10019
*Z15015
*Z15015
*Z15015
*Z15015
*Z15015
*Z15015
*Z15019
*Z15019
*Z15024
*Z15024
*Z20015
*Z20015
*Z20015
*Z20015
*Z20019
*Z20019
*Z20019
*Z20024
*Z20024
-
1700
.42
TRIMCLAD®
MAX (MM)
PURLIN SPACING
SPAN (MM)
1800
.42 CORODEK®
2400
.42 TRIMCLAD®
Z10015
Z10015
Z10019
Z10019
Z15015
Z15015
Z15019
*Z10019
*Z15015
*Z15015
*Z15015
*Z15015
*Z15015
*Z15019
*Z15019
*Z15024
*Z15024
*Z20015
*Z20015
*Z20015
*Z20019
*Z20019
*Z20024
*Z20024
*Z20024
-
3000
3300
3600
3900
4200
4500
4800
5100
5400
5700
6000
6300
6600
6900
7200
7500
7800
8100
8400
8700
9000
9300
9600
9900
10200
10500
10800
11100
11400
12000
Z10015
Z10015
Z10015
Z10015
Z10015
Z10015
*Z10015
*Z10015
*Z10015
*Z10015
**Z10015
*Z10019
**Z10019
*Z15015
*Z15015
**Z15015
*Z15015
*Z15015
**Z15015
*Z15019
**Z15019
*Z15024
**Z15024
**Z15024
**Z15024
*Z20015
*Z20015
*Z20019
**Z20019
**Z20024
Z10015
Z10015
Z10015
Z10015
*Z10015
*Z10015
*Z10015
*Z10015
**Z10015
*Z10019
**Z10019
*Z15015
*Z15015
*Z15015
*Z15015
*Z15015
*Z15019
**Z15019
**Z15024
*Z15024
**Z15024
**Z20015
**Z20015
*Z20019
**Z20019
**720019
*720024
*Z20024
**Z20024
-
*1 row of bridging
**2 rows of bridging
1. Pitch is up to 20˚, Height is up to 10 metres. 2. Spans greater than shown should be fully calculated.
Section
46 - 6
106 13
Services supplied
Patio Sheeting - Effective 6/07/2015
Solarspan
Code
DESCRIPTION
C/BOND
$/M²
SOLSPAN**50V
50mm Solarspan
125.57
SOLSPAN**75V
75mm Solarspan
130.62
S/SPAN**100V
100mm Solarspan
135.79
S/SPAN**125V
125mm Solarspan
165.15
S/SPAN**150V
150mm Solarspan
177.83
Colours available: Surfmist, Classic Cream, Paperbark, Pale Eucalypt, Shale Grey, Dune,Jasper, Basalt *Underside
finish is Smooth or Elegance.
Code
DESCRIPTION
C/BOND
$/M²
IRQ050**/SMV
50MM INSULROOF
147.52
IRQ075**/SMV
75MM INSULROOF
163.80
IRQ100**/SMV
100MM INSULROOF
186.90
IRQ125**/SMV
125MM INSULROOF
220.50
IRQ150**/SMV
150MM INSULROOF
241.50
Colours available: Surfmist, Classic Cream, Paperbark, Pale Eucalypt, Shale Grey, Dune,Jasper, Basalt *Underside
finish is Smooth or Elegance.
108
47
SOLARSPAN
SPECIFICATION
DESCRIPTION: An insulated roofing system providing a pre-painted steel underside complete with a tongue and groove edge,
bonded to an insulated polystyrene core and a profiled truncated triangular shaped sheet on the top side.
ROOF SPECIFICATIONS
WIDTH
CORE AS 1366, PART 3 1992
1000mm cover
SL Grade Polystyrene
13.5 kg/m2
LENGTH
Cut to order
“K” VALUE CORE
0.038
MAX SKIN TEMP
78°C Dry
Heat Sustained
ADHESIVE
Thermosetting Two part
Polyurethane CFCFree
FINISH
Plainface
Rippleface
Ribface
The Polystyrene used in AUSSIE PANEL is CFC Free and has fire retardant added.
REFERENCED AUSTRALIAN STANDARDS
AS 1170.2
SAA Loading Code - Wind Loads
AS 1397
Sheet and Strip Hot-Dipped Zinc-Coated or Aluminium/Zinc Coated.
AS 1526
One Part Polysulphide-based Sealing Compounds for the Building Industry.
AS1562.1
Design and Installation of Sheet Roof, Part 1: Metal.
AS 2179
Rainwater Goods - Specification.
AS2180
Rainwater Goods - Design and Installation.
AS 2728
Pre-painted and Organic Film/Laminate Products Performance Requirements for Interior & Exterior Applications in Buildings.
AS 3566
Screws Self-Drilling for the Building and Construction Industries.
SCOPE
Where indicated on the drawings, provide and fix pan of roof sheeting having ribs of truncated triangular shape all as specified herein complete with all
necessary fasteners, accessories, trims and flashings. All such work shall be in accordance with AS 1562.1, AS 2179, AS 2180 and AS 3566.
MATERIALS
AUSSIE OUTDOOR® PANEL all as described below:
Number of ribs: upper skin
1 underlap, 1 overlap, 3 internal (1 underlap, 1 overlap)
Rib height: upper skin
28mm + 0.4mm - nil
Anti-Capillary Feature:
Cavity formed between underlapping and overlapping ribs.
Cover width:
1000mm + 1.0mm - 2.0mm
Base metal thickness: upper skin
0.42mm
Approximate total coated thickness: upper skin
0.47mm
Steel base description: upper skin
AS 1397-G550 (550MPa minimum yield strength)
Metallic coating description: upper skin
Base metal thickness: lower skin
AS 1397-AZ 150 (150g/m2 minimum coating mass)
0.60mm
Approximate total coated thickness: lower skin
0.65mm
Steel base description: lower skin
AS 1397-G300 (300MPa minimum yield strength)
AS 1397-ZINC (150g/m2 minimum coating mass)
Metallic coating description: lower skin
EARLY FIRE HAZARD AS 1530.3/89
INDEX
Ignitability
Spread of flame
Heat evolved
Smoke developed
Test Range
0-20
0-10
0-10
0-10
External Top Skin
0
0
0
1
TECHNICAL DATA
Exposed Core
12
9
7
7
112
48
Thickness (mm)
Weight (kg/m2)
R Value 8°C m2K/W
R Value 20°C m2K/W
50
75
90
10.58
10.94
11.17
1.61
2.26
2.66
1.59
2.22
2.59
49
114
SUMMERMORE Pty Ltd ABN 42 108 898 433
PO Box 1671,
Browns Plains BC,
Queensland, 4118
Tel: 07 3800 0973 Fax: 07 3800 1860 Mob:0438288116
E: ron@summermore.com.au
W: www.summermore.com.au
Friday, 13 June 2014
Richard Gard
Metroll
PO Box 1262
Slacks Creek
QLD 4127
Dear Mr Gard,
STRUCTURAL DESIGN CERTIFICATION (VALID UNTIL 01ST MAY 2015)
GENERIC DESIGN CERTIFICATION FOR ATTACHED PATIO
We, Summermore Pty Ltd, being Registered Structural and Civil Engineers, hereby certify that the design of the Attached 6000mm x
3000mm x 2700mm high Skillion patio structures in regions compliant with wind ratings of N1, N2, N3, C1, C2 and C3 have been
designed in accordance with widely accepted engineering principles and the referenced codes of practice. This certification covers the
members, connections and bracing. The systems designed include Skillion Patios. This certificate is limited to the structural design
only and no responsibility is taken for any loss, damage or failure resulting from the method of construction or wind exceeding the
design wind rating nominated as per the drawings 12-5279-S03 (REV-F).
Referenced Codes of Practice and Manuals
National Construction Code of Australia 2014
AS/NZS 1170.0:2002
Structural Design Actions Part 0General Principles
AS/NZS 1170.1:2002
Structural Design Actions Part 1Permanent, Imposed & Other Actions
AS/NZS 1664.1:1997
Aluminium structures - Limit state design
AS3600:2009
Concrete Structures
AS4055:2006
Wind Loads for Housing
Summermore Pty Ltd accepts no responsibility for information that has not been expressly identified as part of this certification.
If we can be of any further assistance in this matter, please do not hesitate to contact this office.
Yours Faithfully
Ronald Bell
Grad Cert (Tech Mgt), BEng Civil (Hons), PEng, MIEAust (891940), RPEQ (6715), RBP(Vic)(EC27967), RBP(NT)(60596ES), RBP(Tas)(CC5556C), MAIB (9225), JP(Qual).
Director
Summermore Pty Ltd
115
50
Version 3 – March 2013
Form 15—Compliance Certificate for building Design or Specification






 







Street address 
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
X
Lot & plan details 
In which local government area is the land situated?
 
Summermore Pty Ltd confirm that we have designed the 6000mm x 3000mm x 2700mm Attached
Skillion Patio Structures in regions compliant with wind ratings of N1, N2, N3, C1, C2 and C3 as
detailed on the attached drawing sheet 12-5279-S03 (REV-F).
 
AS1170.0, AS1170.1, AS1664.1, AS3600, AS4055, National Construction Code of Australia 2014
 
12-5279-S03 (REV-F).
 
Building certifier reference number
 
Name ()
Ronald Albert BELL
Company name ()
Summermore Pty Ltd
Contact person
Ronald Bell
Phone no. 
07 38000973
Mobile no.
0438288116
Fax no.
07 38001860
Email address
ron@summermore.com.au
Postal address
PO Box 1671, Browns Plains BC, Queensland, 4118
Licence or registration number ()
RPEQ 6715
 
This certificate must be signed by the individual
assessed by the building certifier as competent.
Signature
Ronald A. Bell
Registered Professional Engineer
Grad Cert (Tech Mgt), BEng Civil (Hons), PEng,
MIEAust (891940), MIPENZ (1027605)
13JUN2014
Signed ..
RPEQ (6715), RBP(NT) (60596ES), RBP(Vic) (EC27967),
RBP(Tas)(CC5556),MAIB (9225), JP(Qual).
STRUCTURAL DETAILS CONCURRED
LOCAL GOVERNMENT USE ONLY
Date received
Reference Number/s
116
51
Date
Friday, June 13, 2014
This certificate expires on 01st May 2015

Metroll QLD Price Book

Transcription

Similar documents

Spring 2016

Bend - PacifiCorp

Venice, the Archetype - GreenTown: The Future of Community

501st Empire Strikes Back - Boba Fett

HANOMAG SdKfz 251 D

The Destination is Worth the Journey.

Fireside Motel Overleaf Lodge

February Newsletter - Bend La Pine Schools

2Q 2016 South Bend/Mishawaka Office Market Report