floor heating and cooling systems energy and sanitary systems

Transcription

floor heating and cooling systems energy and sanitary systems
UFH 2014 Price List
FLOOR HEATING AND
COOLING SYSTEMS
Valid from 1st January 2014
ENERGY AND SANITARY
SYSTEMS
N
ST
AG E
GENER
IO
OR
AT
ENERGY
AP
PLIC ATION
WATER
Living full of energy
2014 Price List
Valid from 1st January 2014
ENERGY SYSTEMS
FHS
Roth Original Tacker® Panels
FHS Price Group
Product
Product description
Material No.
Price GBP
Roth System Pipes X-PERT S5®+
Five-layer safety pipe in accordance with DIN 16833/16834 and DIN 4721, with an oxygen
barrier layer in according to DIN 4726, protected from increased mechanical demands
(building site operation and transport) by a PEX coating.
The special yellowish surface layer signifies the highest degree of
resistance against external influences during storage, transport and installation.
Permanent bonding of the pipe layers using S5 coex Technology.
The X-PERT+ material which is improved by additives is resistant to stress cracking,
stable against thermal ageing and DIN CERTCO registered.
FHS
The X-PERT S5®+ pipe is highly flexible.
Max. temperature: 70 °C; short-time 100 °C,
Max. pressure: 6 bar
Permissible minimum bending radius: 5 x da
Dimension
14 mm
14 mm
16 mm
16 mm
17 mm
17 mm
20 mm
20 mm
20 mm
Packing unit
240 m
600 m
200 m
600 m
200 m
600 m
200 m
500 m
2000 m
GBP/m
1115009062
1135002778
1135003402
1135003403
1135002779
1135002780
1135003551
1135003552
1135003553
1.13
1.13
1.18
1.18
1.20
1.20
1.65
1.65
1.65
2000 m on unwinding device/600 m and 500 m can only be installed using the Roth uncoiler.
Roth Original Tacker® system
Product
Product description
Roth System Pipes Alu-Laserflex
Multilayer composite pipe with an oxygen barrier layer in accordance with DIN 4726,
comprising a high-quality thick-walled basic pipe made of PE-RT for water supply,
with a laser-welded aluminium layer, which improves shape retention and also acts as an
oxygen barrier and an additional PE protective layer. Suitable for use in floor heating.
Max. temperature: 70 °C,
Max. pressure: 6 bar,
Dimension
Packing unit
14 mm
14 mm
16 mm
16 mm
100 m
240 m
200 m
600 m
GBP/m
1135002391
1135006212
1135004583
1135004584
1.78
1.78
1.88
1.88
Roth Original Tacker® Clip 14
U-shaped clip with double barb, made of impact-resistant plastic, for fixing
14 mm Roth System Pipes.
The pipe holders are available in cartridges of 30.
GBP/box
Packing unit
300 unit
1135001709
28.08
Roth Original Tacker® Clip Large 17/20
U-shaped clip with double barb, made of impact-resistant plastic, for fixing
16 mm, 17 mm and 20 mm Roth System Pipes.
The pipe holders are available in cartridges of 50mm high.
GBP/box
Packing unit
300 unit
Recommended retail prices excluding carriage and VAT
1135000254
39.35
1
2014 Price List
Valid from 1st January 2014
ENERGY SYSTEMS
FHS
Product
Roth Original Tacker® system
FHS Price Group
Product description
Material No.
Price GBP
Roth Original Tacker® Ex
U-shaped clip with double barb for the perfect fixing with our Roth composite
panel and roll with pipe lifting function for an improved heat transfer in the screed.
Suitable for all Roth system pipes 14, 16, 17 mm and 20mm.
The new Roth original tacker Ex replaces the clip without lifting function.
FHS
GBP/box
Packing unit
1135006302
1.000 units
53.00
Roth Knob Panels (with film surface layer)
Roth Knob Panel 14-17 mm
System element for right-angled and diagonal installation of the Roth System Pipes
14-17 mm with height fixing using optimised knob geometry.
The design of the panel allows fast and easy installation with minimum waste.
The EPS foam-backed and two-sided overlapping polystyrene knob film ensures a tight-sealing
connection and meets the requirements of DIN 18560 with regard to the insulating layer coating
and the prevention of sound bridges and fire protection requirements in according to DIN 4102.
Roth Knob Panel 14-17 mm EPS DES 30-2
For use in housing construction and objects with similar thermal insulation and impact sound
insulation requirements. It meets the requirements of thermal insulation according to
DIN EN 1264, of sound insulation according to DIN 4109 and fire protection according to DIN 4102.
Dimensions
Improved impact sound insulation
1400 x 900 x 50 mm
∆ LW,R (VMR) = 28 dB
Thermal resistance
Max. live load
Rλ,INS = 0,75 m2 K/W
5 kN/m2
(in solid floors and screed with a
surface-specific mass > 70 kg/m2)
Installation distances (mm)
Effective installation area
50/100/150/200/250/300
1,26 m2
Building material class
Colour of cover film
Packing unit
B2
Black
8 panels/box = 10.08sqm
GBP/box
1115007913
223.87
1115007914
292.79
Roth Knob Panel 14-17 mm EPS DEO 10
For use in objects subject to greater loads or at low construction heights.
Dimensions
1400 x 900 x 30 mm
Thermal resistance
Max. live load
Rλ,INS = 0,35 m2 K/W
75 kN/m2
Installation distances (mm)
Effective installation area
50/100/150/200/250/300
1,26 m2
Building material class
Colour of cover film
Packing unit
B2
Black
13 panels/box = 16.38sqm
GBP/box
Roth Knob Panel 14-16 mm
For the installation on insulations provided by the customer. Film element without EPS.
The knob film can be installed with Roth system pipes 14-16 mm on existing insulations.
Dimensions
1400 x 950 x 20 mm
2
Thermal resistance
Max. live load
Rλ,INS = 0,35 m2 K/W
75 kN/m2
Installation distances (mm)
Effective installation area
50/100/150/200/250/300
1,26 m2
Building material class
Colour of cover film
Packing unit
B2
Black
16 panels/box = 20.16sqm
Recommended retail prices excluding carriage and VAT
GBP/box
1135006031
252.78
2014 Price List
Valid from 1st January 2014
ENERGY SYSTEMS
FHS
Roth Knob Panels
FHS Price Group
Product
Product description
Material No.
Price GBP
Roth alignment knob 14-17 mm
System element for creating connection surfaces in door areas. The PS film is
connected to an insulating element, which, in combination with the alignment knob film, ensures
a smooth transition from room to room. The element has a specially
shaped row of knobs for connecting and overlapping the knob panels.
This ensures a tight-sealing connection and meets the requirements of DIN 18560 with regard to
the insulating layer coating and the prevention of sound bridges.
FHS
Roth alignment knob EPS DES 30-2
Dimensions
Improved impact sound insulation
1050 x 250 x 50 mm
∆ LW,R (VMR) = 28 dB
Thermal resistance
Max. live load
Rλ,INS = 0,75 m2 K/W
5 kN/m2
(in solid floors and screed with a
surface-specific mass > 70 kg/m2)
Building material class
Packing unit
B2
10 panels/box
GBP/box
1115007906
136.80
1115007907
136.80
Roth alignment knob EPS DEO 10
For use in objects subject to greater loads.
Dimensions
1050 x 250 x 30 mm
Thermal resistance
Max. live load
Rλ,INS = 0,35 m2 K/W
75 kN/m2
Building material class
Packing unit
B2
10 panels/box
GBP/box
Roth alignment knob film
System element for creating connection surfaces in door areas when used together
with the adjustment knob EPS DES 30-2 or EPS DEO 10 mm. The element is has a specially
shaped row of knobs for connecting and overlapping the knob panels.
Dimensions
Building material class
Packing unit
1050 x 250 x 20 mm
B2
10 films
GBP/box
1115007908
74.20
Roth diagonal fixing
For fixing system pipes that are installed diagonally.
Dimensions
Building material class
Packing unit
140 x 70 mm
B2
10 films
GBP/box
1115007909
9.00
1115007891
131.40
Roth fixing strips
System element for connecting individual pipes and for covering edges.
Length: 1200 mm, width: 100 mm
10 units/box
Recommended retail prices excluding carriage and VAT
GBP/box
Packing unit
3
2014 Price List
Valid from 1st January 2014
ENERGY SYSTEMS
FHS
Roth ClimaComfort® TBS
FHS Price Group
Product
Product description
Material No.
Price GBP
Roth ClimaComfort® TBS System Panel PS 30 SE
In accordance with DIN EN 13163 (WLG 035), with devices to accommodate the heat conducting
lamellas for the meandering and/or parallel installation of the Roth System Pipes Alu-Laserflex,
14 mm, with a tongue and groove system for interconnection of the panels. The design of the
panel allows fast and easy installation with minimum waste. Suitable for panel heating/cooling
in floors.
Dimensions
Installation distances
1025 x 525 x 33 mm
100/200/300 mm
0,50 m2
Thermal resistance
Max. live load
Packing unit
0,75 m K/W
35 kN/m
15 panels/7,5 m /box
2
2
FHS
Effective installation area
GBP/box
2
1135002783
120.00
Building material class
B1
Area of application: mezzanine floors in heated rooms, utilisation as defined in DIN EN 1264
Roth heat conducting lamella 14 mm
Made of galvanised sheet steel, for holding the 14 mm Roth System Pipes Alu-Laserflex and
improving heat transmission by extensive covering of the system panel.
The heat conducting lamellas have set breaking points every 100 mm.
Dimensions
Installation distances
Packing unit
1000 x 100 mm
1000 x 200 mm
100 mm
200/300 mm
25 units/box
25 units/box
GBP/box
1135002781
1135002782
86.25
141.25
Roth PE cover film
0,2 mm thick film of polyethylene as separation layer between the Roth ClimaComfort TBS
System Panel and the load-distribution layer or between the Roth ClimaComfort panel and the
load distribution layer.
GBP/m2
Packing unit
75 m
1135000263
2
1.08
Roth PE foam
As impact sound insulation layer under the Roth system composite panel PS 30 SE 26 mm,
the ClimaComfort TBS System Panel PS 30 SE and the ClimaComfort panel system.
Dimensions
Thickness dL/dB
Packing unit
Length: 50 m, width: 1 m
6/5 mm
50 m2/roll
Dyn. stiffness
Building material class
s` ≤ 60 MN/m
3
B2
GBP/m2
1135000262
2.10
Roth edge insulating strips 130 mm
For low-rise constructions, comprising special 8 mm thick foam plastic,
130 mm high with 180 mm welded on PE film, available on rolls up to 25 metres.
GBP/m2
Packing unit
25 m
4
Recommended retail prices excluding carriage and VAT
1135000261
0.54
2014 Price List
Valid from 1st January 2014
ENERGY SYSTEMS
FHS
Roth ClimaComfort® Compact system
FHS Price Group
Product
Product description
Material No.
Price GBP
Roth ClimaComfort® Compact system panel
High-strength transparent system panel with 14 mm installation height, of semi-crystalline material.
The special panel structure with undercutting allows standardised and secure fixation of the pipes.
The system pipes ClimaCor® S5 11 x 1,30 mm are installed in a coiled or meandering shape as
desired, in an installation grid of 75 mm, diagonal installation with a spacing of 105 mm is possible.
ClimaCompact system panels overlap 22 mm on both sides to facilitate interconnection of the
panels and have an adhesive back to ensure all-over adhesion of the panels as well as secure fixing
to the subsurface
Filling holes and vent holes used to insert the filling and sealing compound ensure a secure and
stable connection with the base.
Dimensions
Material
1072 x 772 x 14 mm
PET
0,785 m2
Installation grid
Building material class B2 DIN 4102
Packing unit
75/150/225 mm/diagonal 105 mm
FHS
Effective installation area
10 panels/7,84 m2 box
GBP/box
1115007104
181.60
Roth ClimaCor® S5 System Pipe
Five-layer safety pipe in accordance with DIN 16833, DIN 16834 and DIN 4721, with an oxygen
barrier layer in accordance with DIN 4726. The innovative Alu screen layer increases the
performance and resistance of the pipe in case of increased mechanical demands (building site
operation and transport). Permanent bonding of the pipe layers using S5 coex Technology.
The ClimaCor® S5 System Pipe is resistant to crack formation and stable against thermal ageing,
minimum bending radius of 3 x da, manufactured according to DIN 16833/16834 and DIN 4726.
Max. temperature: 70 °C; short-time 100 °C. Max. pressure: 6 bar
Dimension
Packing unit
11 mm
11 mm
120 m
240 m
GBP/m
1135003441
1135003741
0.96
0.93
Roth ClimaComfort® Compact screw fitting
For connecting 11 x 1,30 mm ClimaCor® S5 System Pipes to the Roth manifold.
Comprising: a brass union nut with 3/4”/11 mm internal thread, brass pipe adapter
with Euro cone and clamp ring.
Dimension
Spanner size
Packing unit
11 mm
SW 30 mm
1 unit
GBP/unit
1135006677
9.12
Roth ClimaComfort® Compact T Connection
For the connection of two same length heating circuits of the 11 x 1,30 mm ClimaCor® S5
System Pipes to the heating circuit pipe coupling of the Roth manifold with brass union nut with
3/4“ internal thread. Including screw connections for 11 x 1,30 mm ClimaCor® S5 System Pipes.
Dimension
Packing unit
11 mm
2 units
GBP/unit
1135006678
45.13
Roth ClimaComfort® Compact double submanifold
For connection of the heating circuits of the same length, of 11 x 1,30 mm ClimaCor® S5
System Pipes to a controlled thermal heat supply as single manifold or in combination.
Comprising: Brass profile with 2 heating circuit pipe couplings for 11 x 1,30 mm ClimaCor® S5
System Pipes with screw connection.
Brass profile connection each with 1/2“ external thread and 1/2“ internal thread
Dimensions
Manifold
Packing unit
95 mm
UV-02
2 units
GBP/unit
1135006680
73.89
Roth ClimaComfort® Compact coupling
Comprising one brass double nipple and two screw connections for connection of
Roth 11 x 1,30 mm ClimaCor® S5 System Pipes.
Dimension
Packing unit
11 mm
1 unit
GBP/unit
1135003446
19.18
Roth ClimaComfort® Compact transition pipe nipple
Brass reducing component, one-sided 1/2“ thread, for connection of pipes and the
Roth ClimaCor® S5 11 x 1,30 mm System Pipes, incl. screw connection.
Dimension
Packing unit
11 mm
1 unit
Recommended retail prices excluding carriage and VAT
GBP/unit
1135003447
12.63
5
2014 Price List
Valid from 1st January 2014
ENERGY SYSTEMS
FHS
Roth ClimaComfort® Compact system
FHS Price Group
Product
Product description
Material No.
Price GBP
Roth ClimaComfort® Compact press fitting
For directly connecting 11 x 1,30 mm Roth ClimaCor® S5 System Pipes to the Roth
System Pipes. Comprising: double nipple with press contour and screw thread for 11 x 1,30 mm
Roth ClimaCor® S5 System Pipes, incl. stainless steel crimping sleeve and screw connection.
Dimension
Packing unit
16 mm/11 mm
17 mm/11 mm
20 mm/11 mm
1 unit
1 unit
1 unit
FHS
GBP/unit
1135005016
1115007102
1115007103
15.01
23.07
19.20
Roth ClimaComfort® Compact edge insulation strips
For separating the filling and sealing compound from adjacent rising components, 5 mm thick
special foam plastic, 50 mm high, with adhesive strips for fixing to the subsurface.
Packing unit
GBP/m
25 m
1135003442
1.13
Roth ClimaComfort® Compact expansion joint profile
For the secure separation of field areas and the formation of permanently flexible joints consisting
of a closed-cell polyethylene core with stable PET coating and 90° angled,
self-adhesive contact zone, 8 mm wide, 40 mm high and 1800 mm long.
Packing unit
10 units
GBP/unit
1135003443
11.93
Roth pipefix 11
U rail with 25 mm perforated grid for pipe fixation on uneven surfaces, adapted to the
ClimaCor® S5 11 mm System Pipes with predefined separation points. The base of the pipefix is
self-adhesive.
Dimensions
2500 x 22 x 13 mm
Grid
25 mm
Packing unit
1 unit
GBP/unit
1135004603
6.25
Roth ClimaComfort® Compact filling and sealing compound
Mixture as a special, self-spreading, hydraulically curing compound of high solidity
for filling the ClimaComfort Compact system panels and connecting them to the subsurface.
Use following corresponding pretreatment on concrete, cement screed, calcium sulphate bound
screeds, ceramic coatings. Base layer for any floors on the basis of special cement,
mineral aggregates (special medium-grain grading curve – synthetic resin coated, for manual and
mechanical processing).
Consumption approx. 25 kg/m2 (system coverage 3 mm)
Mixture in 25 kg/bag
Processing: please refer to manufacturer's instructions
Material requirements overview for 1 m2 Roth ClimaComfort® Compact system
with Roth ClimaCor® S5 System Pipe
Installation spacing
Combinations
6
75mm
150mm
225mm
1 m ClimaComfort® Compact
system panel
1 m edge insulation strip 50 mm
13,33 m pipe
1 m ClimaComfort® Compact
system panel
1 m edge insulation strip 50 mm
6,6 m pipe
1 m ClimaComfort® Compact
system panel
1 m edge insulation strip 50 mm
4,45 m pipe
2
2
Recommended retail prices excluding carriage and VAT
2
2014 Price List
Valid from 1st January 2014
ENERGY SYSTEMS
FHS
Roth ClimaComfort® panel system
FHS Price Group
Product
Product description
Material No.
Price GBP
Roth ClimaComfort® panel 14
Suitable for floor/wall and ceiling structures.
Two-layer structure with Al heat conduction plate and EPS support panel (WLG 031).
Screw-fastening of the panel to profiles or props provided by the customer on walls and ceilings.
Easy pipe installation thanks to grid elements on both sides of the heat conduction plate.
Peg sockets for form-fitting connection of the ClimaComfort panels 14 to each other
or to the ClimaComfort end piece 14.
Dimensions
Installation distances
Effective installation area
1200 x 625 x 25 mm
100/200/300 mm
0,75 m2
Thermal resistance
Max. live load
Rλ,INS = 0,75 m2 K/W
35 kN/m2
Building material class
Packing unit
B2/DIN 4102
8 panels/6 m2/box
FHS
GBP/box
1115008533
499.48
Roth ClimaComfort® panel end piece 14
Suitable for floor/wall and ceiling structures.
Element foam-moulded from highly breakage-resistant EPP with pipe socket undercuts
for compact diversion of ClimaCor® S5 System Pipes, form-fitting connection by means of pegs
to the Roth ClimaComfort ® panel 14.
Screw-fastening to the dry construction profiles or props.
Dimensions
Material
625 x 134 x 25 mm
EPP ( λ = 0,043 W/mK)
Building material class
Packing unit
B2 DIN 4102
10 units
GBP/box
1135005382
70.69
1135005462
121.45
Roth ClimaComfort® panel pipe guide panel
EPS element for installing forward and return flow lines in the floor edge region.
One panel gives 4 segments. Suitable for pipe dimensions 14 mm and 16 mm.
Dimensions
100 x 610 x 25 mm (2 pipe guides)
GBP/box
Packing unit
10 panels
Roth ClimaComfort® panel heat conduction film
For the heat equalisation of corner regions, for example window reveals. The graphite composite
film (λ ≥ 350 W/mK) with damp retardant function is connected directly to the ClimaComfort panel
using adhesive tape for optimum heat transport.
Dimensions
Packing unit
965 x 370 x 1 mm
2 units
Recommended retail prices excluding carriage and VAT
GBP/unit
1115008572
39.63
7
2014 Price List
Valid from 1st January 2014
ENERGY SYSTEMS
FHS
Roth ClimaComfort® panel system
FHS Price Group
Product
Product description
Material No.
Price GBP
Roth ClimaComfort® panel 16
Suitable for floor structures. Two-layer structure with Al heat conduction plate and EPS support
panel (WLG 031).
Dimensions
Installation distances
Effective installation area
1220 x 605 x 25 mm
150/300 mm
0,74 m
Thermal resistance
Max. live load
Rλ,INS = 0,75 m2 K/W
35 kN/m2
Building material class
Packing unit
B2/DIN 4102
12 panels/8,9 m2/box
FHS
2
GBP/box
1115008534
694.36
1135005461
121.45
Roth ClimaComfort® panel end piece 16
EPS panel with pipe socket for deflecting the System Pipe Alu-Laserflex Dimension 16.
One panel gives 2 end pieces.
Dimensions
Material
609 x 404 x 25 mm
EPS
Building material class
Packing unit
B2 DIN 4102
10 panels
GBP/box
Roth ClimaComfort® pipe guide panel
EPS element for the installation of feed and return lines in the floor edge region.
One panel gives 4 segments. Suitable for pipe dimensions 14 and 16 mm.
8
Dimensions
Packing unit
100 x 610 x 25 mm (2 pipe guides)
10 panels
Recommended retail prices excluding carriage and VAT
GBP/box
1135005462
121.45
2014 Price List
Valid from 1st January 2014
ENERGY SYSTEMS
FHS
Roth pipefix system
FHS Price Group
Product
Product description
Material No.
Price GBP
Roth pipefix
Plastic clamping rail for simple pipe installation with height fixing,
with pre-punched holes for additional anchoring in the insulation layer.
Pipefix 11
2500 x 22 x 13,0
GBP/unit
Grid spacing 25 mm
1135004603
6.25
Grid spacing 25 mm
1135004591
6.50
Grid spacing 25 mm
1135004592
6.28
Grid spacing 50 mm
1135004593
6.59
Grid spacing 50 mm
1135004594
7.03
Grid spacing 50 mm
1135004595
15.90
FHS
Packing unit 10
Pipefix 14
2500 x 38 x 18,3
Packing unit 10
Pipefix 16
2500 x 38 x 22,5
Packing unit 10
Pipefix 17
2500 x 38 x 22,5
Packing unit 10
Pipefix 20
2500 x 38 x 25,5
Packing unit 1
Pipefix 25
2500 x 38 x 32,2
Packing unit 1
Roth fix binder
For fixing Roth pipefix to reinforcement layers.
Packing unit
100 units
GBP/unit
1135000364
0.04
Holding pin for pipefix
For fixing the pipefix to the plastic insulation provided by the customer.
Length: 50 mm
Packing unit
100 units
GBP/unit
1135003292
0.16
Roth PE cover film
0,2 mm-thick polyethylene film, as separation layer between insulation layer and load
distribution layer.
Packing unit
75 m
2
Recommended retail prices excluding carriage and VAT
GBP/m2
1135000263
1.08
9
2014 Price List
Valid from 1st January 2014
ENERGY SYSTEMS
FHS
Roth Component Separation
FHS Price Group
Product
Product description
Material No.
Price GBP
Roth edge insulating strips 160 x 8 mm
Comprising special 8 mm thick foam plastic, 160 mm high with 280 mm welded on PE film,
self-adhesive back. Suitable for cement screed.
Packing unit
GBP/m
25 m
1135003791
0.64
Roth edge insulating strips 160 x 10 mm
Comprising special 10 mm thick foam plastic, 160 mm high with 280 mm welded on PE film,
self-adhesive back. Suitable for cement screed and floating screed.
Packing unit
GBP/m
25 m
1135002831
0.76
Roth PE profile
Round profile of 15 mm PE foam for sealing the connection area between the edge insulation strip
and knob panel.
Dimensions
Packing unit
15 mm x 25 m
10 rolls/PE bag
GBP/m
1135002043
0.94
Roth expansion joint profile
For the secure bounding of screed surfaces and the formation of permanently flexible joints
consisting of a flexible polyethylene core with stable PET coating, 10 mm wide, 100 mm high,
1800 mm long, with self-adhesive strips.
Roth protective pipes are not included in the price and must be ordered separately.
GBP/unit
Packing unit
10 units/box
1135002109
13.64
Roth PE protective pipe
PE corrugated pipe (slit) for the protection of Roth System Pipes crossing expansion joints.
Dimension
Packing unit
Area of application
19/25 mm
23/28 mm
28/34 mm
25 m
25 m
25 m
(System pipes size: 14, 16 and 17 mm)
(System pipe size: 20 mm)
(System pipe size: 25 mm)
GBP/m
1135000295
1135000296
1135000292
0.89
0.98
2.01
Roth adhesive tape
50 mm wide, 66 m long.
Packing unit
1 unit
10
Recommended retail prices excluding carriage and VAT
GBP/unit
1135000265
4.29
FHS
2014 Price List
Valid from 1st January 2014
ENERGY SYSTEMS
FHS
Roth Manifolds and Manifold Cabinets
FHS Price Group
Product
Product description
Material No.
Price GBP
Roth manifold with flow rate indicator, lockable
The forward and return flow pipes are made of brass and can be connected on the right or the
left over the flat-packed 1“ external thread.
Forward flow: with lockable flow indicator (setting range: 0–4 l/min) for adjustment of the
individual heating circuits.
Return flow:
with integrated, lockable thermostat valves.
The heating circuits are connected over a 3/4“ Euro cone.
The manifold is pre-mounted on insulated consoles.
Scope of delivery: Manifold, end pieces with shutoff for filling/emptying/bleeding, inscription plate
and assembly instructions.
Manifold Total length in mm1)
Packing unit
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
HK
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
2
3
4
5
6
7
8
9
10
11
12
250
305
360
415
470
525
580
635
690
745
800
FHS
GBP/unit
1115009796
1115009797
1115009798
1115009799
1115009800
1115009801
1115009802
1115009803
1115009804
1115009805
1115009806
153.00
188.81
223.95
260.27
297.03
333.87
369.17
405.11
440.84
477.68
515.16
For all Roth System Pipes 14 to 20 mm
1)
Dimensions incl. required installation space
Roth screw connections and Roth red brass press connections are not included in the delivery
with the manifold and must be ordered separately.
Recommended retail prices excluding carriage and VAT
11
2014 Price List
Valid from 1st January 2014
ENERGY SYSTEMS
FHS
2013 Price List
Product
Valid from 1st June 2013
Roth Manifolds and Manifold Cabinets
FHS Price Group
Product description
Material No.
Price GBP
Roth Bypass-module set
For equalising the differential pressure between the supply and return header manifold, in order to
keep the pump pressure/throughput constant even with manifold valves connected. Installation
ready unit with 1“ union nut for connection to Roth universal manifolds with lockable flow rate
indicator or Roth universal manifold. Suitable for installation in the manifold cabinet.
FHS
Product
Product description
Dimensions
Setting range
Packing unit
270 x 65 mm
0,03 - 0,5 bar
1 unit
FHS
Material No.
Price uro
GBP/unit
1150009001
172.58
FHS
Made from galvanised sheet steel, visible parts painted white, rear wall with vertical,
Roth angled connection set 1“, flat packing
Flat-packing connection set for vertical connection to the round pipe manifold (1“ external thread).
and screed end cover.
Contents comprise 2 connection brackets, 1 extension and 2 ball valves in red and blue.
Sizecomponents
Widhave
th W1“ connections,
Installation the
heigseals
ht areDincluded
epth T
Door width
All
mm
H mm
mm
BT mm
0
550
790-880
140
536
I
750
790-880
140
736
II
0
790-880
140
936
Roth
zone95control
valve
Comprising1a1line
and ball
III
50 control valve
790-with
880 integrated flow
14meter
0
11valve
36
for the control and shutoff of manifolds.
Display range 4-36 l/min, Kvs value 3,5 m3/h, Connection 3/4“ inner thread and 1“ union nut.
NEW
GBP/unit
GBP/unit
1150008825
1135007168
1135007169
1135007170
1135007181
82.65
130.00
145.00
170.00
195.00
1135004600
133.74
1150009341
1150009342
1150009343
1150009344
127.20
141.49
155.29
186.61
GBP/unit
Packing unit
1 unit
Manifold cabinet made from galvanised sheet steel, visible parts painted white,
with lockable door,
Size
Width W
mm
Installation height
H mm
Depth T
mm
B
0
I
II
III
550
750
950
1150
790-880
790-880
790-880
790-880
75-150
75-150
75-150
75-150
Door width
BT mm
Width
Masking frame
BB mm
536
736
936
1136
600
800
1000
1200
GBP/unit
Note: The manifold cabinet must be pulled out to a depth of at least 120 mm
Cabinet width
0
I
II
III
12
550 mm
750 mm
950 mm
1150 mm
Number of manifold heating circuits (size)
4
8
12
12
4
8
11
12
3
7
11
12
2
5
8
12
Recommended retail prices excluding carriage and VAT
4
8
12
3
7
12
5
9
2014 Price List
2013
List
Valid fromPrice
1st January
2014
Valid from 1st June 2013
FHS
FHS
Product
Product
ENERGY SYSTEMS
Roth Manifolds and Manifold Cabinets
FHS Price Group
Product description
Material No.
Product description
Material No.
Price GBP
Price uro
FHS
Made from galvanised sheet steel, visible parts painted white, rear wall with vertical,
FHS
and screed end cover.
Size
2013 Price List
Valid from 1st June 2013
0
I
II
III
Width W
mm
550
750
950
1150
Installation height
H mm
Depth T
mm
Door width
BT mm
790-880
790-880
790-880
790-880
140
140
140
140
536
736
936
1136
NEW
GBP/unit
130.00
145.00
170.00
195.00
1135007168
1135007169
1135007170
1135007181
FHS
Product
Product description
Material No.
Price uro
Manifold ccabinets
abinet mamade
de from
galvasheet
nised steel
sheet(visible
steel, visparts
ible papainted
rts paintwith
ed whRAL
ite, 9010, non-visible
Manifold
from
rails for the manifolds, a standard mounting rail and a spray guard for electronic
components
with lockable door,
Size
Surface
B
Size
0
0I
III
III
II
Width W
mm
Width W
mm
550
750
5
60
950
7
00
1150
900
Installation height Depth T
H mm
mm
Installation height Depth T
H mm
mm
790-880
790-880
7
60-860
790-880
760-860
790-880
7
60-860
Door width
BT mm
Door width
BT mm
75-150
75-150
140
75-150
140
75-150
140
Width
Masking frame
BB mm
536
736
5
08
936
6
48
1136
848
600
800
1000
1200
III
1100
760-860
140
1048
Note: The manifold cabinet must be pulled out to a depth of at least 120 mm
IV
1300
760-860
140
1248
GBP/unit
1150009341
1150009342
1
135003759
1150009343
1135003760
1150009344
1
135003761
127.20
GBP/unit
141.49
204.02
155.29
230.38
186.61
260.04
1135003762
1135004598
290.42
333.21
1135003763
1135003764
1135003765
1135003766
1135004599
155.74
173.52
186.61
222.86
261.66
Flush
Size
0
I
II
III
IV
Width W
mm
560
700
900
1100
1300
Installation height
H mm
770-860
770-860
770-860
770-860
770-860
Depth T
mm
100-170
100-170
100-170
100-170
100-170
Door width
BT mm
Width
Masking frame
BB mm
546
686
886
1086
1286
610
750
950
1150
1350
GBP/unit
Note: The manifold cabinet must be pulled out to a depth of at least 120 mm if a
Cabinet width
0
I
II
III
550 mm
750 mm
950 mm
1150 mm
Number of manifold heating circuits (size)
4
8
12
12
4
8
11
12
3
7
11
12
2
5
8
12
Recommended retail prices excluding carriage and VAT
48
Recommended retail prices excl. VAT
4
8
12
3
7
12
5
9
13
2014 Price List
Valid from 1st January 2014
ENERGY SYSTEMS
FHS
*
Flush only
Number of manifold heating circuits (size)
Surface
0 (560mm)
I (700mm)
II (900mm)
III (1100mm)
IV (1300mm)
Flush
0 (560mm)
I (700mm)
II (900mm)
III (1100mm)
IV (1300mm)
4
7
10
12
12
3
5
9
12
12
2
4
8
12
12
-
3
6
10
12
4
8
12
4
7
10
12
12
3
5
9
12
12
2
4
8
12
12
4
8
12
12
3
6
10
12
4
8
12
* incl. ball valve and end piece
14
Recommended retail prices excluding carriage and VAT
2014 Price List
Valid from 1st January 2014
ENERGY SYSTEMS
FHS
Roth Manifolds and Manifold Cabinets
FHS Price Group
Product
Product description
Material No.
Price GBP
Roth ball valve 1“
Fits the Roth manifold.
Brass ball valve, 1“ with union nut, flat packing.
FHS
Packing unit
1 unit
GBP/unit
1135006454
19.89
Roth bend degree support
Enables 90° deflection of Roth System Pipes, areas of application: ceiling ducts and
manifold supply.
for size
Packing unit
14 to 17 mm
20 mm
1 unit
1 unit
GBP/unit
1135004596
1135004597
1.07
2.19
Roth Connection Technology
Roth universal screw connection
For connection of all Roth System Pipes, including Alu-Laserflex, to Roth universal manifolds or
manifolds with flow indicator. The screw connection comprises: union nut, 3/4“, nickel-plated,
clamp ring, supporting body with Euro cone, O-ring sealing and cutter wheel.
Dimension
Packing unit
14 mm
16 mm
17 mm
20 mm
10 units
10 units
10 units
10 units
GBP/unit
1135005188
1135005189
1135005190
1135005201
4.10
3.96
3.61
4.14
Roth brass press connection
For the connection of Roth System Pipes to Roth universal manifolds and Roth manifolds
with lockable flow rate indicator. Comprising: brass union nut with 3/4“ internal thread,
nickel-plated, brass supporting body with Euro cone and stainless steel sleeve.
Dimension
Packing unit
14 mm
16 mm
17 mm
20 mm
10 units
10 units
10 units
10 units
GBP/unit
1135001503
1115006832
1135001505
1135001506
7.93
14.96
6.62
8.87
Roth blank cap
For shutting off connectors that are not required on Roth manifolds with lockable flow indicator
or Roth universal manifolds.
Dimension
Packing unit
3/4“ internal thread
10 units
GBP/unit
1135000354
3.12
Roth brass fitting
Comprising one brass double nipple and two screw connections for connection of
Roth DUOPEX S5® System Pipes, X-PERT S5®+ and heating pipes PERTEX® S5.
Dimension
Packing unit
14 mm
16 mm
17 mm
20 mm
1 unit
1 unit
1 unit
1 unit
GBP/unit
1135001471
1115007910
1135000278
1135000279
17.07
12.52
16.14
15.68
Roth brass fitting with PressCheck®
Comprising: double supporting body and two fixed stainless steel sleeves for permanent
connection of Roth System Pipes.
Dimension
Packing unit
14 mm
16 mm
17 mm
20 mm
10 units
10 units
10 units
10 units
Recommended retail prices excluding carriage and VAT
GBP/unit
1135004728
1135004729
1135004730
1135004731
8.12
8.27
7.17
9.25
15
2014 Price List
Valid from 1st January 2014
ENERGY SYSTEMS
FHS
Roth Floor Heating Systems Control Technology
FHS Price Group
Product
Product description
Material No.
Price GBP
Roth RSF 20.T/.. room thermostat
Electronic temperature controller for the control of individual rooms in accordance with EnEV
(Energy Saving Control), used in combination with the Roth actuator.
Optional: adapter for surface installation
Setting range: 5 - 30 °C
Colour: white
Version
Connection
Packing unit
RSF 20.T/1
RSF 20.T/2
230 V
24 V
1 unit
1 unit
FHS
GBP/unit
1135007402
1135007403
33.21
34.61
Roth RSF 20.T/.. room thermostat “Public Authority Model”
Electronic temperature controller for the regulation of individual rooms in accordance with EnEV
(Energy Saving Control), concealed setpoint values, e.g. for use in public buildings.
Optional: adapter for surface installation
Setting range: 5 - 30 °C
Colour: white
Version
Connection
Packing unit
RSF 20.T/1 i
RSF 20.T/2 i
230 V
24 V
1 unit
1 unit
GBPunit
1135007404
1135007405
35.08
36.71
Roth adapter for surface installation
Adapter only for surface installation the RSF 20.T/.. room thermostats, without
flush-mounting box, directly on the wall, not suitable for the RSF 220.T/...
Packing unit
10 units
GBP/unit
1135001934
4.27
1135007406
1135007407
225.89
227.30
1135003210
100.55
Roth RSF 220.T/.. room thermostat
Electronic temperature controller with digital week timer for the control of individual rooms acc.
to EnEV (Energy Saving Control), used in combination with the Roth actuator. Suitable for pilot
control in combination with the Roth room thermostats RSF 20.T/... Setting range: 5 - 30 °C,
night reduction: 2-10 K (adjustable), silent Triac output, operating mode switch: automatic
temperature, comfort temperature, reduction temperature, frost-protection temperature.
Version
Connection
Packing unit
RSF 220.T/1
RSF 220.T/2
230 V
24 V
1 unit
1 unit
GBP/unit
Roth AM-6 connection module
Connection unit for the clear connection of Roth 230 V actuators and the respective 230 V Roth
room thermostats RSF 20.T/1 or RSF 220.T/1. The Roth 24 V actuators can also be connected to
Roth room thermostats RSF 20.T/2 or RSF 220.T/2 if used in combination with the Roth RT-2
transformer. The pumps can be controlled as required using the pump control card 230 V or 24 V.
Suitable for installation in the Roth manifold cabinet. The module can either be screwed
to the rear wall of the manifold cabinet or, if using standard mounting rails, using the Roth clamp
bracket set for standard mounting rails.
6 room/time switch thermostats and a maximum of 12 actuators can be connected as required.
Version
Connection
Packing unit
AM-6
230/24 V
1 unit
GBP/unit
Roth clamp bracket for standard mounting rail
Clamp bracket set consisting of 2 clamp brackets for mounting the Roth AM-6 connection module
and the radio connection module (heating/cooling), 4/6 channel, on standard mounting rails
(EN 50022/ 35 x 7,5 or 35 x 15)
Packing unit
1 unit
GBP/unit
1135003211
21.05
Roth strain relief
For Roth AM-6 connection module and Roth radio connection module (heating/cooling), 4/6 channel
Comprising: 9 x strain relief, large and 6 x strain relief, small.
Packing unit
1 unit
GBP/unit
1135004112
12.86
Roth VAC pump control card
Plug-in 230/24 V pump control card for on-demand pump operation and
energy saving operation, for plugging into the Roth AM-6 connection module and
Roth 6-channel connection module.
16
Version
Connection
Packing unit
RPL-1
RPL-2
230 VAC
24 VAC
1 unit
1 unit
Recommended retail prices excluding carriage and VAT
GBP/unit
1135003212
1135003213
30.40
30.40
2014 Price List
Valid from 1st January 2014
ENERGY SYSTEMS
FHS
Roth Floor Heating and Cooling Systems
Control systems
FHS Price Group
Product
Product description
Material No.
Price GBP
Roth RT-2 transformer
For 230 V/24 V AC voltage switchover if used with 24 V Roth control components.
Wired ready to plug in for connection to the mains and connecting cable for connection
to the low-voltage control components. Stable plastic enclosure for wall mounting.
Version
Packing unit
RT-2
1 unit
Recommended retail prices excluding carriage and VAT
FHS
GBP/unit
1135000324
200.00
17
2014 Price List
Valid from 1st January 2014
ENERGY SYSTEMS
FHS
Roth Floor Heating Control Technology
FHS Price Group
Product
Product description
Material No.
Price GBP
Roth small-area control station
The small-area control station is used for connecting panel heating systems to existing radiator
heating systems. The duo connection supports connection of 2 floor heating circuits.
The room temperature is controlled by means of a customer-supplied room thermostat and an
integrated actuator.
Max. system pressure:
Max. system temperature:
Max. inlet temperature:
Connection (hydraulic):
Connection (electric):
Power consumption (pump):
10 bar
80 °C (primary side/boiler)
45 °C (floor circuit)
3/4“ Euro cone
230 V
25 W
FHS
GBP/unit
1135004000
547.67
Roth duo connection small-area control station
For connecting 2 floor heating circuits
GBP/unit
Packing unit
2 units
1135004001
35.00
Roth flush-mounting manifold cabinet for small-area control station
Plastic flush-mounting box for recess dimensions: W 370 x H 300 x D 95 mm
Colour: white
GBP/unit
1135004601
44.43
Roth 1 Watt actuator NC
For thermostatic control of the heating/cooling circuit. With position indication visible from all sides
and quick-locking bayonet fitting, for mounting on the valves of the Roth manifold with lockable
flow rate indicator and universal manifold. The watertight construction allows any installation position.
Protection class IP 54.
Version: “normally closed”, when power-off closed, suitable for all Roth FHS applications.
Connection
230 V
24 V
Packing unit
normally closed (NC)
normally closed (NC)
1 unit
1 unit
GBP/unit
1135007412
1135007413
27.59
27.59
1135006113
954.55
Roth Fixed-Value Control Set with high efficiency pump
Completely pre-installed and wired fixed-value control set for a constant inlet temperature control
of 20°-50° C. All connection dimensions are adapted to the Roth manifold with lockable flow rate
indicator and universal manifold.
With high efficiency pump Grundfos ALPHA 2L 15-60, 3-way- mixer valve, thermostat head,
an adjustable maximum-temperature limiter a thermometer and 2 ball valves.
For controlling the pump as needed, use Roth pump control card.
Energy-efficiency class A!
Installation height: 360mm
Packing unit
Installation length: 275 mm
1 unit
18
Recommended retail prices excluding carriage and VAT
GBP/unit
2014 Price List
Valid from 1st January 2014
ENERGY SYSTEMS
FHS
Roth Installation Tools
FHS Price Group
Product
Product description
Material No.
Price GBP
Roth Original Tacker® 14
The patented Roth Original Tacker® 14 (DBP 3125318), is an installation device specially adapted to
the Roth Original Tacker® System for Roth partners.
Height adjustable including stapler weight; for processing Roth Original Tacker Clips 14.
FHS
NET PRICE
Packing unit
1 unit
GBP/unit
1115005401
112.12
Roth Original Tacker® 16/17/20
The patented Roth Original Tacker® 16/17/20 (DBP 3125318), is an installation device specially
adapted to the Roth Original Tacker® System for Roth partners.
Height adjustable including tacker weight; for processing Roth Original Tacker® clips 16/17/20.
NET PRICE
Packing unit
1 unit
GBP/unit
1115009888
134.87
Roth uncoiler
The ideal installation aid for efficient installation of all pipe collar sizes of Roth System Pipes
NET PRICE
Packing unit
1 unit
GBP/unit
1135000191
235.55
Roth folding uncoiler
This compact folding uncoiler (4-arm) is for the ideal and efficient installation of all Roth pipe
collars up to 600 m.
The folded uncoiler is only 900 mm long and weighs a mere 12,5 kg.
Permissible load bearing capacity of approx. 90 kg, maximum core diameter of approx. 630 mm,
maximum ring height 600 mm, completely adjustable.
NET PRICE
Packing unit
1 unit
GBP/unit
1135003461
256.06
Roth pipe straightening device 14-25 mm
Roth pipe straightening device, for straightening Roth System Pipes Alu-Laserplus® and
Alu-Laserflex of dimensions 14-25 mm (rolls), in bars.
Optional: can be mounted on the Roth folding uncoiler if used in combination with the
Roth adapter for pipe straightening devices.
NET PRICE
GBP/unit
Packing unit
1 unit
1135003961
243.78
Roth adapter for Roth pipe straightening device 14-25 mm
Adapter for fixing Roth pipe straightening device 14-25 mm to the Roth folding uncoiler.
NET PRICE
GBP/unit
Packing unit
1 unit
1135003962
27.18
Roth TBS cutting device
Electric hot cutting device without round tip for creating additional channels in
Roth ClimaComfort® TBS system panels.
NET PRICE
Packing unit
Roth TBS cutting device
GBP/unit
1 unit
1135001100
79.81
1 unit
1135001101
52.62
Round tip for
Roth TBS cutting device
Recommended retail prices excluding carriage and VAT
19
2014 Price List
Valid from 1st January 2014
ENERGY SYSTEMS
FHS
Roth Installation Tools
Product
Product description
Material No.
Price GBP
Roth cutters for protection pipe
For the safe cutting of protection pipes up to a diameter of 32 mm.
NET PRICE
Packing unit
1 unit
GBP/unit
1135000374
18.42
Roth pliers for expansion joint profile
For punching out pipe throughput holes.
NET PRICE
Packing unit
1 unit
GBPunit
1135002110
61.38
Roth pipe scissors
For cutting Roth system pipes.
NET PRICE
Packing unit
1 unit
GBP/unit
1135000286
20.70
Roth pipe cutter
For cutting Roth System Pipes Alu-Laserflex (Ø 14 and 17 mm) and
Roth System Pipes Alu-Laserplus® (Ø 14 to 63 mm).
NET PRICE
Packing unit
1 unit
GBP/unit
1135001669
71.91
Roth calibration tool
Universal tool for calibrating Roth System Pipes Alu-Laserflex or Roth System Pipes Alu-Laserplus®
and deburring Roth System Pipes DUOPEX S5®, Roth heating pipes PERTEX® S5 and
Roth System Pipes X-PERT S5®+, adapted to Roth pipe dimensions.
NET PRICE
Dimension
Packing unit
14, 17, 20 mm
1 unit
GBP/unit
1135000240
25.43
Roth calibration insert 16 mm
Calibrating and chamfering tool for Roth System Pipes Alu-Laserplus® and Alu-Laserflex,
for manual or mechanical use in drills and cordless screwdrivers or with the Roth grab handle
for single calibration tool.
NET PRICE
Dimension
Packing unit
16 mm
1 unit
GBP/unit
1135005173
19.29
Roth grab handle for single calibration tool
Grab handle with quick locking for manual use of the Roth single calibration tool.
NET PRICE
Packing unit
1 unit
GBP/unit
1135005178
11.41
Roth outer bending spring
For manual bending of Roth System Pipes Alu-Laserflex or Roth System Pipes Alu-Laserplus®.
NET PRICE
20
Dimension
Packing unit
14 mm x 300 mm
16 mm x 350 mm
17 mm x 350 mm
20 mm x 400 mm
1 unit
1 unit
1 unit
1 unit
Recommended retail prices excluding carriage and VAT
GBP/unit
1135000579
1135003032
1135000580
1135000581
4.82
5.61
6.40
9.00
FHS
N
Roth Energy Systems
ST
AGE
PRODU
IO
OR
CT
ENERGY
Production
> Solar Systems
> Solar Cylinders
USE
WATER
ROTH UK Limited
Higher Ford, Wiveliscombe, Taunton, Somerset TA4 2RL
Phone +44 (0)1984 623982 • Fax +44 (0)1984 623915
email sales@roth-uk.com • www.roth-uk.com
This price list supersedes all previous price lists. For specialised trade customers only.
Storage
Storage systems for
> Rain and Waste Water
> Fuels
Use
> Radiant Heating and
Cooling Systems
> Pipe Installation Systems