Chimney Pots - The Fireplace

Chimney Pots
Domain Terraces Newmarket
The Fireplace supply chimney pots made from hand crafted Terracotta Clay, Stainless Steel and Copper.
Terracotta Clay Chimney Pots are made to fit up to a maximum flue size of 250mm diameter, the stainless steel
and copper pots can be made to fit flues up to 300mm diameter. Whether for new installations or retro fits into
existing masonry chimneys, there is a chimney pot to suit practically any residential situation, modern contemporary
or traditional.
All Terracotta Clay Chimney Pots provided by The Fireplace can be painted on site, if colour variations are required.
Full installation instructions are provided with every chimney pot and details are also available on our website,
www.thefireplace.co.nz.
Overall Height = 700mm
Base = 550mm OD (+/-10mm)
Top = 380mm I.D (+/-10mm)
SS Wire ties to
secure 3 internal
ceramic tabs
(top & botttom)
A
30mm min
30mm min
Epoxy mortar
infill shaped
to permit
water escape
Fall
40 Dia weep holes
50
E
B
C
D
A Butterfly Cowl
B 15mm Silafex beads for whole
circumference
E
Fall
Chimney
Chase
C Inner flue
D Outer flue
E Outer expansion/contraction sleeve
Clay Chimney Pot Performance Statement
All Terracotta Clay Chimney Pots are hand crafted products and may vary slightly dimensionally, due to the hand crafted
and drying processes involved.
Due to the potential effects of environmental causes such as extreme winds and temperatures, icing, seismic activity and
hail storms (to name a few), The Fireplace Ltd will not warranty against any cracks or breakages of the Terracotta Clay
Chimney Pots. Chimney structure instability such as cracks and general deterioration may also affect the longevity of the
chimney pots.
Bird proofing must be used to prevent birds nesting and causing possible fire hazards.
Head Office & Showroom
12 Tawari St, Mt Eden, Auckland
Ph: 09 623 6996
www.thefireplace.co.nz