Titus Tekform SWD Brochure

Transcription

Titus Tekform SWD Brochure
Titus Tekform
Product brochure
Tekform
Single
Wall
Drawer
2016
Important
Information
Intellectual property
Titus Group owns the intellectual property
rights in its products worldwide whether
as trademarks, patents, intellectual,
copyright, designs, illustrations, drawings
and the ‘know how’ contained in their
design and production. Titus Group
respects the equivalent rights in competitors
and all other relevant product design rights
in others. To our knowledge our products
do not infringe any intellectual property
rights of competitors or other parties.
Titus Group takes infringements of its rights
seriously and will rigorously defend these
rights to the full extent of the law.
Responsibility
It is the responsibility of the user to ensure
the fitness of hardware for the intended
purpose. We recommend assessment by
appropriate testing in the application and
by technical enquiry to our representatives.
Technical information
While every effort has been made in the
production of this catalogue to ensure the
accuracy of information, our products are
continually being revised and users should
confirm the up to date specification before
ordering.
*Non preferred articles
All Item numbers in the catalogue marked
with * are for non preferred non stock items
available upon special request. For such
products, extended delivery times may
apply.
Trademarks
Titus and Titusonic are registered
trademarks of Titus International Ltd.
Lama is a registered trademark of Lama
d.d. Dekani, WoodWelding is a registered
trademark of WW SA.
Single Wall Drawer Systems
Tekform drawer SW85
Tekform drawer SW117
Tekform drawer SW150
Tekform drawer SW210
Versatile and Reliable
The single-wall Tekform drawer is the right solution to solve kitchen, wardrobe and
bathroom vanity drawer applications. Both strong and affordable, the drawer’s fluid
sliding movement is due to the use of a roller slide system, whilst the epoxy coating
makes it silent during operation. The product is available in a large range of heights and
depths. The immediate vertical adjustment makes the drawer very versatile and easy to
use; it is also ideal both for automatic and manual assembly.
Lifetime warranty
•
50,000 cycle tested lifetime warranty
Quality certified
•
•
•
•
1
By European specialized institutions
Level 5 Heavy Domestic
CATAS
FIRA
Tekform Single Wall Drawer
Tekform
Single Wall
Drawer
Easy front fixing
•
•
Front clips available for all drawer
fixing methods
Spring loaded action for easy location
of the drawer front
User friendly mounting
•
•
•
Intuitive installation instructions
Easy assembly and disassembly
of the drawer
Assembly equipment available
Precise drawer alignment
•
•
•
Huge vertical cam adjustment
Provides a total +/- 4mm adjustment
Side adjustment +/- 1.5mm
2
150
Screw on 250
603.8C61.025
>
150
270
603.8C61.027
>
150
350
603.8C61.035
>
150
400
603.8C61.040
>
150
450
603.8C61.045
>
150
500
603.8C61.050
>
150
550
603.8C61.055
>
150
C15 pin assembly 250
603.8C62.025
>
150
270
603.8C62.027
>
150
350
603.8C62.035
>
150
400
603.8C62.040
>
150
450
603.8C62.045
>
150
500
603.8C62.050
>
150
550
603.8C62.055
>
150
ECW: External cabinet width
ICW: Internal cabinet width
NL: Nominal length of drawer
One set consists of
1 Pair
3
White
>
Cutting dimensions details
Push latch > page 15
Item number
603.8C68.050
Drawer runner
May be use with Titusoft damper
for metal drawers (MD) or the
Titus Push Latch.
with Tekform
front clip
Machine insertion 500
Drawer side
Front clip
NL
Nominal length
Tekform Drawer
SW85
Titusoft MD > page 13
Drawer
sides
2 pcs
Drawer
runner
2 pcs
Front
clips
2 pcs
Mounting
instructions
1 pce
•
•
•
•
•
•
•
Large range of dimensions from 250 to 550 mm depth
Screw on, dowel fixing machine insertion ready or C15 assembly options
Simple bottom mounting for ease of assembly
Unilateral restraint-guide compensates for tolerances
Drawer runner type
Load capacity
Minimal height space required
Wooden back panel thickness
Side
adjustment
+/- 1.5mm
Single extension roller
25kg
106.5mm
12-18mm
Installation dimensions and drilling patterns
Height
adjustment
+/- 2.5mm
Drawer runner fixing positions
Front panel drilling pattern
Back panel drilling pattern
Bottom panel width
Installation and back panel dimensions
Drawer runner mounting
13
Fixing screws for front brackets
and drawer runner
13
7.5 7.5 7.5 7.5 4
12
1212
44
4
Euro screws
Chipboard screws
611.8E22.360.013
611.8K16.240.016
10000 Pcs
12
13 13
A trial mounting is always recommended. For further information please contact your Titus Tekform representative.
7.57.5
7.57.5
4 4
12 12 1212
4 4
4
Tekform Single Wall Drawer
•
with Tekform
front clip
Item number
White
NL
Nominal length
Tekform Drawer
SW117
Screw on 250
603.8C71.025
>
150
270
603.8C71.027
>
150
350
603.8C71.035
>
150
400
603.8C71.040
>
150
450
603.8C71.045
>
150
500
603.8C71.050
>
150
550
603.8C71.055
>
150
C15 pin assembly 250
603.8C72.025
>
150
270
603.8C72.027
>
150
350
603.8C72.035
>
150
400
603.8C72.040
>
150
450
603.8C72.045
>
150
500
603.8C72.050
>
150
550
603.8C72.055
>
150
Drawer side
Drawer runner
Front clip
Cutting dimensions details
ECW: External cabinet width
ICW: Internal cabinet width
NL: Nominal length of drawer
One set consists of
1 Pair
May be use with Titusoft damper
for metal drawers (MD) or the
Titus Push Latch.
Push latch > page 15
5
Titusoft MD > page 13
Drawer
sides
2 pcs
Drawer
runner
2 pcs
Front
connectors
2 pcs
Mounting
instructions
1 pce
•
•
•
•
•
•
•
Large range of dimensions from 250 to 550 mm depth
Screw on, dowel fixing machine insertion ready or C15 assembly options
Simple bottom mounting for ease of assembly
Unilateral restraint-guide compensates for tolerances
Drawer runner type
Load capacity
Minimal height space required
Wooden back panel thickness
Side
adjustment
+/- 1.5 mm
Roller slides
25kg
138.5mm
12-18mm
Installation dimensions and drilling patterns
Height
adjustment
+/- 2.5mm
Drawer runner fixing positions
Front panel drilling pattern
Back panel drilling pattern
Bottom panel width
Installation and back panel dimensions
Drawer runner mounting
13
Fixing screws for front brackets
and drawer runner
13
7.5 7.5 7.5 7.5 4
12
1212
44
4
Euro screws
Chipboard screws
611.8E22.360.013
611.8K16.240.016
10000 Pcs
12
13 13
A trial mounting is always recommended. For further information please contact your Titus Tekform representative.
7.57.5
7.57.5
4 4
12 12 1212
4 4
6
Tekform Single Wall Drawer
•
White
>
150
270
603.8C81.027
>
150
350
603.8C81.035
>
150
400
603.8C81.040
>
150
450
603.8C81.045
>
150
500
603.8C81.050
>
150
550
603.8C81.055
>
150
C15 pin assembly 250
603.8C82.025
>
150
270
603.8C82.027
>
150
350
603.8C82.035
>
150
400
603.8C82.040
>
150
450
603.8C82.045
>
150
500
603.8C82.050
>
150
550
603.8C82.055
>
150
Front clip
Cutting dimensions details
ECW: External cabinet width
ICW: Internal cabinet width
NL: Nominal length of drawer
One set consists of
1 Pair
7
Item number
603.8C81.025
Drawer runner
Push latch > page 15
with Tekform
front clip
Screw on 250
Drawer side
May be use with Titusoft damper
for metal drawers (MD) or the
Titus Push Latch.
NL
Nominal length
Tekform Drawer
SW150
Titusoft MD > page 13
Drawer
sides
2 pcs
Drawer
runner
2 pcs
Front
clips
2 pcs
Mounting
instructions
1 pce
•
•
•
•
•
•
•
Large range of dimensions from 250 to 550 mm depth
Screw on, dowel fixing machine insertion ready or C15 assembly options
Simple bottom mounting for ease of assembly
Unilateral restraint-guide compensates for tolerances
Drawer runner type
Load capacity
Minimal height space required
Wooden back panel thickness
Side
adjustment
+/- 1.5 mm
Roller slides
25kg
170.5mm
12-18mm
Installation dimensions and drilling patterns
Height
adjustment
+/- 2.5mm
Drawer runner fixing positions
Front panel drilling pattern
Back panel drilling pattern
Bottom panel width
Installation and back panel dimensions
Drawer runner mounting
13
Fixing screws for front brackets
and drawer runner
13
7.5 7.5 7.5 7.5 4
12
1212
44
4
Euro screws
Chipboard screws
611.8E22.360.013
611.8K16.240.016
10000 Pcs
12
13 13
A trial mounting is always recommended. For further information please contact your Titus Tekform representative.
7.57.5
7.57.5
4 4
12 12 1212
4 4
8
Tekform Single Wall Drawer
•
150
270
603.8C91.027
>
150
350
603.8C91.035
>
150
400
603.8C91.040
>
150
450
603.8C91.045
>
150
500
603.8C91.050
>
150
550
603.8C91.055
>
150
C15 pin assembly 250
603.8C92.025
>
150
270
603.8C92.027
>
150
350
603.8C92.035
>
150
400
603.8C92.040
>
150
450
603.8C92.045
>
150
500
603.8C92.050
>
150
550
603.8C92.055
>
150
ECW: External cabinet width
ICW: Internal cabinet width
NL: Nominal length of drawer
One set consists of
1 Pair
9
White
>
Front clip
Push latch > page 15
Item number
603.8C91.025
Cutting dimensions details
May be use with Titusoft damper
for metal drawers (MD) or the
Titus Push Latch.
with Tekform
front clip
Screw on 250
Drawer side
Drawer runner
NL
Nominal length
Tekform Drawer
SW210
Titusoft MD > page 13
Drawer
sides
2 pcs
Drawer
runner
2 pcs
Front
clips
2 pcs
Mounting
instructions
1 pce
•
•
•
•
•
•
•
Large range of dimensions from 250 to 550 mm depth
Screw on, dowel fixing machine insertion ready or C15 assembly options
Simple bottom mounting for ease of assembly
Unilateral restraint-guide compensates for tolerances
Drawer runner type
Load capacity
Minimal height space required
Wooden back panel thickness
Side
adjustment
+/- 1.5 mm
Roller slides
25kg
233.5mm
12-18mm
Installation dimensions and drilling patterns
Height
adjustment
+/- 2.5mm
Drawer runner fixing positions
Front panel drilling pattern
Back panel drilling pattern
Installation and back panel dimensions
Drawer runner mounting
13
Fixing screws for front brackets
and drawer runner
13
7.5 7.5 7.5 7.5 4
12
1212
44
4
Euro screws
Chipboard screws
611.8E22.360.013
611.8K16.240.016
10000 Pcs
12
13 13
A trial mounting is always recommended. For further information please contact your Titus Tekform representative.
7.57.5
7.57.5
4 4
12 12 1212
4 4
10
Tekform Single Wall Drawer
•
Accessories
Side
Front Clips
Mounting
Item number
Screw on
603.8C46.005
Left
Screw on
603.8C46.006
Right
Machine insertion
603.8C46.010
Left
Machine insertion
603.8C46.012
Right
EFS
603.8C46.015
Left
EFS
603.8C46.016
Front Clips Right
Screw on
Machine insertion 10mm
Expanding dowel 10mm
1 Pce
11
Accessories
•
Length (mm)
•
Improved storage in high drawers
Clips for wooden and metal backs
Easy one-step fixing and screw-on front attachment
Lasting quality
Round Railing
Item number
EasyFix 250
603.8C98
8)"5/)(9/:0;
8)"5/)(9/:0;
/01
/01
L
T
!64
!64
603.8C98
!57
>
!57
!74)
!74) !27)
!27)
521)
350
521)
603.8C98
564)
564) 557
557
404)
404) 577
577
464)
464) 457
411)
421)
400
603.8C98
204) 204)
<
264)
!64
450
500
L
550
T
L
T
521)
521)
421)
421)
Screw-on
411) 250
411)
L
<
257)
045
>
!27)
204)
!21
!21
050
577
>
457
-
603.8C98
264)
-
477)
!!"32 !!"32
>
257)
!4"32) !4"32)
!"1)
!"1)
521)
521) 5!"32) 5!"32)
421)
421) 4!"32 4!"32
603.8C98
411) 411)
211) 211)
603.8C98
<
350
!"1)
603.8C98
!4"32)
>
521)
5!"32)
221)
!21
411)
400
411)
603.8C98
T
421
421
02806807
02806807
211
211
611
611
"11
"11
="2&+/0(
711
711
5&90;
911 911
511
411
Back bracket (wood)
421
211
611
"11
T
135
5""32
L
T
127
140
>
421)
4!"32
="2&+/0(:"+/*(
="2&+/0(:"+/*(
0;&4>+/##
0;&4>+/##
- 4""32)
211)
02806807
02806807
!55
!55
221)
2!"32
>
02806807
02806807
555 555
T
125
4""32) 4""32)
>
221) 2!"32 2!"32
!!"32
421)
="2&+/0(
="2&+/0(
5&90; 5&90;
211)
511 511
221)
411 411
450
055
> 5""32
5""32
270
521)
Screw-on Railing
464)
040
477)
211) 211)
8)"5/)(9/:0;
221) 221)
!21
!"1)
T
<
035
557
404)
603.8C98
411)
027
457
>
477)
564)
421)
8)"5/)(9/:0;
8)"5/)(9/:0;
211)
!21
!21
221)
!"1)
!"1)
min. 11
>
264) 257)
!57
603.8C98
!74)
521)
/01
-
!"1)
!"1)
T
-
!21
270
211) 211)
8)"5/)(9/:0;
221) 221)
!21
L
025
>
!21
421)
min. 11 min. 11
<
!"1)
411)
EasyFix Railing
<
145
603.8C98
575
575
150
02806807
455 455
500 02806807
>
603.8C98
02806807
02806807
255
255
02806807
02806807
655
655
155
="2&+/0(:"+/*(
02806807
"55 > "55
550 02806807
603.8C98
0;&4>+/##
02806807
02806807
02806807
755
!55
755
02806807
603.8C98555>
02806807
575
02806807
455
02806807
255
#$%&'()*+,'-)+-)..
#$%&'()*+,'-)+-).. 655
02806807
711
02806807
911
02806807
#$%&'()*+,'-)+-)..
Tekform Single Wall Drawer
•
White
•
200
!""
!""
"55
755
!""
1 Pair
12
Titusoft MD
Soft Closing System
for Metal Box
Titusoft MD
Titusoft mechanism for factory mounting 973.0X95
>
380
Titusoft mechanism for retrofit mounting 973.0X39
>
380
Activator 973.4125
>
Mounting jig 973.4126
>
Light blue
Item number
White
Grey
For metal boxes
350
Titusoft mechanism
309
Bag of 1
973.0X39.380.K2
90
bags
1 Titusoft mechanism
1 activator
1 mounting jig
4 screws
3.2 1 mounting instruction sheet
•
•
8
9
•
•
•
Activator
3.2
Mounting jig
•
•
•
•
250 Pcs
•
Made of plastic
Technical details
60
bags
2 Titusoft mechanisms
213
2 activators
1 mounting jig
8 screws
1 mounting instruction sheet
42.4
40.5
Bag of 2
973.0X39.380.K1
Factory mounting (system holes)
Retrofit mounting
8
8
9
9
4
225
6.
5
Ø
30
42.4
6.
5
213
192
Ø
42.4
40.5
213
3.2
Ø4
40.5
40.5
3.2
Ø4
3.2
3.2
213
225
30
42.4
Ø4
30
Ø4
42.4
3.2
Ø4
40.5
3.2
Ø
192
192
213
213
5
Ø
6.
5
6.
5
40.5
40.5
Ø
Ø
6.
5
6.
5
213
13
Ø4
8
8
9
4
4
225
L
2
1
2
1
3
Capacity chart
(kg)
20
•
•
•
One-for-all soft closing for single skin metal boxes
Allows for easy factory mounting or retrofit application
Intuitive positioning
Preserve the life-time of the drawer
Tekform Single Wall Drawer
•
(mm)
Mount 1 or 2 Titusoft mechanisms
depending on drawer weight and width
L
5
L
1
3
1
3
1
1
1
1
L
2
1
Mounting details
L
2
2
1
2
Retrofit mounting
2.
1.
5
1
1
3
3
3.
5
L
5
4.
3
5
1
1
L
2
1
97.5
2
For retrofit mounting
Factory mounting
9
For factory mounting
1
3
5
8.8
30
5
103.5
46
Marked line
58
130
13.5
Marked line
18.5
1
5.
46
192
9
5
9
Further explanations > go to
9
http://www.youtube.com/watch?v=QpIq8uKGbng
A trial mounting is always recommended. For further information please contact your Titus Tekform representative.
14
Push Latch
Bronze
For wooden drawers
Item number
Push Latch
Cross mounting plate 915.0X59.381
>
K1*
Linear mounting plate 915.0X59.381
>
K2
*Available upon special
request
+
Push latch
Cross mounting plate
+
Push latch
Linear mounting plate
200 Sets
Made of steel and plastic
13
Fixing screws for front brackets
and drawer runner
13
7.5 7.5 7.5 7.5 4
12
13 13
15
7.57.5
7.57.5
4 4
12 12 1212
4 4
1212
44
12
4
Euro screws
Chipboard screws
611.8E22.360.013
611.8K16.240.016
10000 Pcs
•
•
•
Works with Tekform Single Wall Drawers
Effortless opening with just a light touch
Depth adjustment ensures reliable closing and consistent
performance in cases of inaccurate drilling
‘Safety click’ feature for easy detachment of the
mechanism from the mounting plate
Drilling patterns
Ø
Tekform Single Wall Drawer
•
Dimensions
37
6.
4
20
(3
x)
.2
32
11
Minimum gap
required
37
Ø6
.4
2
16.5
Depth adjustment
+4.5 / -1mm
32
43
Ø5
.4
Ø6
Positioning
On the cabinet side; gap between drawer and cabinet side = min. 12mm
On the drawer bottom; in the middle of the drawer
Push latch works on drawer; the gap between the drawer and the cabinet side = min. 13.4mm
16
Titus Tekform
NZ Hardware
New South Wales
Queensland
Victoria
Titus Tekform Pty Ltd
Unit 1&2, 41-43 Whyalla Place
Prestons, NSW, 2170 Australia
T: +61 2 9826 0007
Fax: +61 2 9826 0074
ABN: 67 168 439 647
Titus Tekform Pty Ltd
76 Northlink Place
Virginia, QLD, 4014 Australia
T: +61 7 3266 3999
Fax: +61 7 3266 5234
PO Box 266
Northgate, QLD, 4013
Titus Tekform Pty Ltd
8/59 Jersey Road
Bayswater, VIC, 3153 Australia
T: +61 3 9737 5566
Fax: +61 3 9729 8780
PO Box 357
Bayswater, VIC, 3153
Titus Tekform Pty Ltd
20 Civil Road
Garbutt, QLD, 4814 Australia
T: +61 7 4779 1366
Fax: +61 7 4779 1316
Titus Tekform Pty Ltd
2/20 Mint Street
Wodonga, VIC, 3690 Australia
T: +61 2 6056 3188
Fax: +61 2 6056 3190
South Australia
Christchurch
Titus Tekform Pty Ltd
PO Box 357
Bayswater, VIC, 3153 Australia
T: +61 8 8447 3700
Fax: +61 8 8447 3183
Stefano Oriati
162 Wordsworth Street
Sydenham, Christchurch, 8023 NZ
T: 0064-3-981-8518
Fax: 0064-3-942-7296
Titus Tekform Pty Ltd
Unit 3, 100 Munibung Road
Cardiff, NSW, 2285 Australia
T: +61 2 4954 4011
Fax: +61 2 4954 4233
Tasmania
Titus Tekform Pty Ltd
88 Hopkins Street
Moonah, TAS, 7009 Australia
T: +61 3 6273 1199
Fax: +61 3 6273 0050
PO Box 658
Moonah, TAS, 7009
Auckland
Stefano Oriati
34 Waipareira Ave
Henderson, Auckland, 0610 NZ
T: 0064-9-8370886
Fax: 0064-9-8378003
Get in touch with your local Technical Sales Representative
web: www.titustekform.com.au or www.stefanohardware.com
email us at info@titustekform.com.au or info@nzhe.co.nz
Titus Group
www.titusplus.com
www.titustekform.com.au
TekformSWD.07.16

Similar documents

Huwil Lift up.indd

Huwil Lift up.indd the fitness of hardware for the intended purpose. We recommend assessment by the appropriate testing in the application and by technical enquiry to our representatives. Technical information While e...

More information

CASE STUDY: Northrop Gruman

CASE STUDY: Northrop Gruman CASE STUDY: Northrop Gruman Carpathia Teams with Northrop Grumman to ‘Transform’ Defense Travel System (DTS), Achieving Cost Reductions & Security Enhancements. Seamless Datacenter Migration Comple...

More information

System 6 - HGH Hardware Supply

System 6 - HGH Hardware Supply the fitness of hardware for the intended purpose. We recommend assessment by appropriate testing in the application and by technical enquiry to our representatives. Technical information While every...

More information