System 6 - HGH Hardware Supply

Transcription

System 6 - HGH Hardware Supply
Titus+Lama+Huwil
Technical catalogue
and manual
Furniture
fittings
systems
2010
TitusPlus
The new TitusPlus
catalogue combines
Titus connectors, Lama
concealed hinges and
Glissando soft-closing
systems. The combination
of Titus+Lama+Huwil
provides access to a
tradition of innovative
products and worldwide
technical and distributive
support.
· Innovative products
· Technical support
· Worldwide distribution
· Consistent quality
· Knowledgable service support
· Competitive installed cost
Titus+Lama+Huwil
· User friendly
products
· Functionality
· Advanced
features
Furniture
manufacturer
Furniture
user
· User satisfaction
· Loyalty
Our customers will benefit with ‘one
source’ availability of the specialty furniture
hardware programme illustrated in this
catalogue as:
• ‘Titus’ for connectors,
• ‘Lama’ for concealed hinges and
Glissando soft-closing mechanisms
Titus+Lama+Huwil will focus on providing
fastening and door opening mechanisms
for kitchens, household furniture, ready to
assemble and office furniture products.
The product offerings will continue to
be characterized by an understanding
of our customers needs for innovation,
consistent quality and service support at
competitive installed cost.
01_lama_uvod_in_kazalo_R_CS2.ind0.1 0.1
8/25/10 12:48:12 PM
01_lama_uvod_in_kazalo_R_CS2.ind0.2 0.2
8/25/10 12:48:13 PM
Important
information
Intellectual property
Titus International reserves all intellectual
property rights worldwide for all information
contained in this catalogue.
Responsibility
It is the responsibility of the user to ensure
the fitness of hardware for the intended
purpose. We recommend assessment by
appropriate testing in the application and by
technical enquiry to our representatives.
Technical information
While every effort has been made in the
production of this catalogue to ensure the
accuracy of information, our products are
continually being revised and users should
confirm the up to date specification before
ordering.
*Non preferred articles
All Item numbers in the catalogue marked
with * are for non preferred non stock items
available upon special request. For such
products, extended delivery times may apply.
Trademarks
Titus and Titusonic are registered trademarks
of Titus International Ltd. Lama is a registered
trademark of Lama d.d. Dekani and Huwil
is a registered trademark of HUWIL-Werke
GmbH, WoodWelding is a registered
trademark of WW SA.
0.3
01_lama_uvod_in_kazalo_R_CS2.ind0.3 0.3
8/25/10 12:48:13 PM
Contents
1
2
3
4
5
6
01_lama_uvod_in_kazalo_R_CS2.ind0.4 0.4
8/25/10 12:48:13 PM
Connectors
Soft closing systems
- System 1
- System 2
- System 3
- System 4
- System 5
- System 6
- System 7
- Information
- Glissando hinge attached soft-closing system
- Glissando stand-alone soft-closing system
- Glissando PD
- Glissando for drawers
Concealed hinges
- Information
- ST plus, ST plus Touch opening, ST, ST free
- Basic
- Miniprimat
- Special hinges
Storage solutions
- Drawer solutions
- Wardrobe/closet solutions
- Soho™ solutions
1.1
1.7
1.11
1.15
1.17
1.23
1.41
1.54
2.1
2.3
2.13
2.15
2.17
2.19
3.1
3.3
3.19
3.55
3.79
3.95
4.1
4.3
4.5
4.6
Other functional fittings
5.1
The TitusPlus Group profile
6.1
01_lama_uvod_in_kazalo_R_CS2.ind0.5 0.5
8/25/10 12:48:13 PM
02_titus_connectors_R_CS2.indd 1.1
8/25/10 12:55:49 PM
Connectors
02_titus_connectors_R_CS2.indd 1.2
8/25/10 12:55:49 PM
Connectors
Product guide
Page
System 1
Fittings for rigid assembly systems
a highly cost-efective and
rigid assembly system for
factory, consumer and home
assembly
1.7
face boring applications that
provide a tolerant efficient
assembly
1.11
two component rigid face and
edge drilling fastening
1.15
a range of low-cost one-piece
fittings for high volume home
assembly applications
1.17
a comprehensive range of
cam and dowel connecting
fittings for all cabinet
applications
1.23
System 2
Fittings for face-boring applications
System 3
Fittings for face and edge boring
System 4
Fittings for face-boring only
System 5
Cams and dowels
1.3
02_titus_connectors_R_CS2.indd 1.3
8/25/10 12:57:10 PM
System 6
Quickfit-Expando connectors
face boring expanding
connectors for all cabinet
applications.
1.41
High quality fittings for offices
and public furniture.
1.54
Connectors
Page
System 7
Heavy duty cams and dowels
1.4
02_titus_connectors_R_CS2.indd 1.4
8/25/10 12:57:11 PM
Connectors
Information
Why choose Titus?
Titus connectors add
value to furniture and to
furniture manufacturing
Titus connectors improve the quality
of furniture and lower the cost of
manufacturing and assembly
while ensuring a high degree of
customer satisfaction.
The most advanced
range of connectors
available on the market
Precise and efficient product design.
The broadest possible range of
drilling tolerances ensures reliable
assembly and consistently strong joints.
Klix locking feature, the engagement
of interlocking teeth on cam and
dowel, to prevent joint
loosening in service or transit.
Expanding function provides degrees
of variation in out-of-tolerance drillings
ensuring stronger joints and improved
quality of furniture.
Twinstart thread for faster and more
stable insertion.
Depth stop collar prevents overinsertion.
Firm tightening for greater confidence
in use.
Cam locks at 230° assuring smooth
tightening action and greater dowel
pull-up.
Quickfit for hand dowel insertion.
Quickfit TL2, TL3 with the built-in self
adjustment feature is the only available
dowel that allows for pre-insertion.
Quickloc one piece fitting for faster
assembly with integrated expanding
cam and dowel.
Zinc+steel dowel for optimal strength
and performance.
Precise dowel manufacturing
high precision of zinc and strength
of steel assures 100% dimensional
accuracy.
Easy and quick consumer
friendly self-assembly
of furniture
Self-assembly furniture offers
consumers good value and instant
availability of products.
Titus connectors provide consumers
with easy assembly and furniture
producers with increased productivity:
- reduced number of assembly parts
- easy assembly instructions
- security of packed parts during transit
With the aim of providing consumer
with simpler instructions, fewer parts
and an easier assembly process, Titus
has significantly reduced and simplified
the number of fittings traditionally
required in furniture production.
1.5
02_titus_connectors_R_CS2.indd 1.5
8/25/10 12:57:11 PM
Connectors
Connectors
Information
Easy and quick furniture assembly
CAF formula
CAF=Consumer Assembly Friendliness
competitors. While offering
consumers easier and
faster assembly, there are obvious
advantages also for furniture
manufacturers – buying, counting,
bagging and stocking of fittings can
be greatly reduced.
Titus CAF formula provides a
comparative measure for customer
satisfaction. By using it manufacturers
are able to evaluate their products
internally or against those of their
How does it work?
Comparative CAF scores
to assemble a hand held
demonstrator
T
A
N
CAF
Connecting screw (traditional assembly)
4
38
3
126
Cam & Single start dowel
6
21
4
108
Cam & Twinstart dowel
6
15
4
84
Cam & TL2 dowel (self-assembly)
6
7
4
52
Cam & TL2 dowel (factory pre-inserted)
2
3
2
10
Quickloc
2
3
1
5
Fully assembled demonstrator
1
0
1
1
1.6
02_titus_connectors_R_CS2.indd 1.6
8/25/10 12:57:11 PM
System 1
Fittings for rigid
assembly systems
System features
Double locking
carcase screw
· Zinc diecast for precision
· Titus Double locking carcase screw
makes an almost invisible connection
· Collar under the head to pull panels
together
· 2nd ‘lower’ thread pulls against a
‘faster’ thread to provide maximum
connection force and prevents
overdriving of fastener
· Almost invisible in position
· Head can be ‘fastcapped’ or filled
Hi-Lo™ carcase
construction
screw
The Hi-Lo™ carcase construction
screw (CCS) offers a strong, tolerant
and cost effective connection with
minimal panel preparation.
· ‘Hi’ thread gives low bursting
component force from the sharp 30
degree angle thread
· ‘Lo’ thread at 60 degree angle uses
the vertical force component to press
fibrous and particle components of
panels onto the ‘Hi’ thread and are
contained by their greater height
· The very small shank on a
Hi-Lo™ screw means less material
displacement than conventional
threads and enables minimum
or partial drilling of pilot holes for
speedier panel processing
The combination effect of the elements
of a Hi-Lo™ screw means
· A greater differential between drive
torque and strip torque in fibrous and
particle materials to ensure a reliable
and repeatable fixing
· Hi-Lo™ threads provide minimum
bursting forces
Barrel nut (plastic)
· Used with Titus Hi-Lo™ screws
· Titus barrel nuts provide maximum
strip torque for reasonable drive
torque
· Capable of multiple reconnection
repeatability
Cover caps
· Available in multiple colours
· All recess and head types offered
· High quality engineering polymers
used in their construction
· Uniformity of holding with good
tolerance
· Wide range of application and use
conditions
1.7
02_titus_connectors_R_CS2.indd 1.7
8/25/10 12:57:20 PM
· High performance from widely spaced primary
thread
· Finer secondary thread provides additional
holding power and positive stop (no override)
· Increased support for vertical panel is gained
from the funnel head with collar at its base
· One-piece fitting
Technical and
mounting details
Screw
6x42
Item number
Zinc
Connectors
System 1
Fittings for rigid
assembly systems
Double locking carcase
screw
00180
885
>
42
min 30
Ø7/7.5
Ø5
1000 Pcs
1. Insert screw to shoulder in
face board
2. Screw into Ø5mm hole
3. Board joint pulled up by
collar on screw
4. Board locked in place by
screw
15/16
Made of zinc
1.8
02_titus_connectors_R_CS2.indd 1.8
8/25/10 12:57:20 PM
System 1
Fittings for rigid
assembly systems
Hi-Lo™ screw
and Barrel nut
· Hi-Lo™ screws have a twin thread for faster insertion
· ‘Hi’ threads and ‘Lo’ threads combine to give excellent
pull out in chipboard
· Funnel head design means no countersinking
· Steel is case hardened for extra strength
Hi-Lo™ screw
20
25
*00062
>
852
4
23
28
*00068
>
852
4
28
33
00071
>
852
4
40
45
00077
>
852
4
40
45
*00171
4
50
55
00172
4
33
38
*06074
>
852
4
45
50
*06077
>
852
5
45
50
*06080
>
852
White
4
Phosphate
Item number
Black
Technical and
mounting details
L
Total Length
Screw diameter
A1
Ø7.6
L
Ø3
Ø5
9 min
852
>
852
>
10000 Pcs (00062)
*American market only
9000 Pcs (00068)
7000 Pcs (00071)
4000 Pcs (00077, 00171, 06074)
Made of steel
3000 Pcs (00172, 06077, 06080)
01056
Barrel nut
>
835
877
Other colours on request
Ø12x11
B
7.5/8
A1
10000 Pcs
Made of plastic
Screw cap
pozi, philips 01020
>
hexagon
>
01042
877
835
877
Other colours on request
50000 Pcs
Made of plastic
1.9
02_titus_connectors_R_CS2.indd 1.9
8/25/10 12:57:23 PM
System 1
Connecting screws
Crosshead
screwdriver
slot
827.6202.
>
040
827.6201.
>
040
White
Item number
Ochre
Technical and
mounting details
Zinc plated
Connectors
· Screws with crosshead PZ2 screwdriver or allen key slot
· Decorative cover caps are available in different colours
Ø10
1000 Pcs
Ø7
Ø10
Ø5
50
Made of steel
Allen-key
slot
4
Ø 10
1000 Pcs
Ø7
Ø10
Ø5
50
Made of steel
Cover caps
for connecting
screws
Universal
Ø12
1.5
Universal
For allen key slot
head
827.4013.
>
330 350
827.4130.
>
330 350
Ø13
For allen key
slot head
1000 Pcs
Made of plastic
1.10
02_titus_connectors_R_CS2.indd 1.10
8/25/10 12:57:24 PM
System 2
Fittings for face-boring
applications
System features
A family of face boring only concealed
fittings and rail fasteners with wide
tolerances and the enormous clamping
power of an angled screw.
·
·
·
·
·
Factory or site component installation
Wide tolerances
Face boring only
Cover caps for concealment
For kitchen, furniture storage, office
and store fixture applications
· Non twist rail fastener versions
· multi use ‘pocket screw’ replacement
· Used in cabinet construction
1.11
02_titus_connectors_R_CS2.indd 1.11
8/25/10 12:57:27 PM
System 2
Fittings for face-boring
applications
Concealed fittings
Housing
assembly
877 835
>
Brown
beige
02046
Zinc plated
Item number
Black
Technical and
mounting details
White
Connectors
· Combination of hi-thread screw and nylon insert
allows a high clamping force improving cabinet rigidity
· Unlimited stacking height due to flush housing
· Provides a strong, secure fitting which eliminates the
need for edge boring
· 1mm either side from hole centre is absorbed
improving consumer confidence
Ø10x12
Ø25x11
6
12
2500 Pcs
Made of plastic, steel
Housing
(no nose)
*02985
>
877
*European market only
Ø25x11
6
12
2500 Pcs
Made of plastic
Screw panhead
No 8 x 17.6
15000 Pcs
01709
>
01732
>
883
Made of steel
Cover cap
877
806
Other colours on request
7000 Pcs
Inserts
Made of plastic
Made of plastic
> see page 1.60
1.12
02_titus_connectors_R_CS2.indd 1.12
8/25/10 12:57:27 PM
System 2
Fittings for face-boring
applications
Rail
fastener
>
831
867
02077
>
06073
>
White
02075
Ivory
Item number
Light brown
Technical and
mounting details
Dark brown
· Range of fixing blocks for multiple applications
· Face drilling only required
· Durable plastic material is flexible providing
greater holding power
· Choose screw fastening or hammer insertion
877
Ø4.5
18
16
16
32.5
to suit
10
Ø10x10.5
2000 Pcs
10
Made of plastic
Rail
fastener
875 877
Ø4.5
17
17
32
10
10
2000 Pcs
Made of plastic
Modesty
block
5
17
30
3000 Pcs
867
877
7
13.5
13.5
Made of plastic
1.13
02_titus_connectors_R_CS2.indd 1.13
8/25/10 12:57:30 PM
Connectors
1.14
02_titus_connectors_R_CS2.indd 1.14
8/25/10 12:57:32 PM
System 3
Fittings for face and
edge boring
System features
Titus System 3 is a two component
rigid face and edge drilled fastening
with half turn to fasten. System 3 offers
almost full concealment and wide
tolerances in use.
· Automatic or in-factory placement
· Pre-location pin ensures ease of
assembly
· Less than one turn of a screwdriver
to fasten
· Shelf edge installation of pin means
maximum shelf cut size tolerance
· Can be used on 12mm shelf panels
· No loose parts for maximum
convenience in RTA
· Drawer front fixing, cabinet
construction
1.15
02_titus_connectors_R_CS2.indd 1.15
8/25/10 12:57:32 PM
System 3
Fittings for face
and edge boring
Concealed housing
Connectors
03118
>
831
11
03121
>
831
White
12.5
Yellow
passivate
Drilling diameter
for dowel thread
Item number
Zinc plated
D2
Dark brown
Housing
assembly
D
Drilling depth
Technical and
mounting details
C
Drilling length
for dowel
· One turn locking system reduces assembly time,
both in the factory and home
· Pre-assembly feature for consumer convenience
· Choice of dowels to suit drilling
· Hi-Lo screw feature for faster insertion
Ø25 x D
(Y=9.5 MAX)
X
Y
X-Y+7
Ø5 x 30
Other colours on request
X, Y - depends on board thickness
2500 Pcs
Made of plastic or zinc, plastic
Screw dowel
Ø5
03168
>
883
Ø25 x D
(Y=9.5 MAX)
X
Y
X-Y+7
Ø5 x 30
X, Y - depends on board thickness
1000 Pcs
Made of steel
Screw dowel
Ø3
(Y=9.5 MAX)
X
Y
X-Y+7
ØD2 x C
X, Y - depends on board thickness
5000 Pcs (03180)
30
3.75
03181
>
881
9
3
03180
>
881
25
3
*03090
>
883
25
3
*03190 >
883
*American market only
4000 Pcs (03181)
1000 Pcs (03090, 03190)
Made of steel
03150
Cover cap
15000 Pcs
>
831
877
Made of plastic
1.16
02_titus_connectors_R_CS2.indd 1.16
8/25/10 12:57:33 PM
System 4
Fittings for
face-boring only
System features
Cost effective one piece fittings with
face boring benefits
·
·
·
·
·
Flush and block components
Face-boring only
Good tolerances
One piece connectors
Angledriv versions fastening with
maximum driving power and flexibility
· Quickloc™ versions need only one
turn to tighten for fast assembly
· Foolproof consumer home insertion
Quickloc™
The integrated housing and dowel
make Quickloc™ the most user-friendly
and tolerant product available.
·
·
·
·
Quickloc™ Assembly
1. Press Quickloc into the face board
2. Assemble the panels
High degree of drilling tolerance
Push-in design
Tool-free insertion
Integrated expanding housing and
dowel provide consistently stronger
joints
· ‘Klix’ locking system
3. Tighten in less than one turn
1.17
02_titus_connectors_R_CS2.indd 1.17
8/25/10 12:57:35 PM
System 4
Quickloc™
One piece expanding
connector
An innovative, one-piece connector, capable of hand insertion
Is highly tolerant and tightens in less than one turn
Is a face-bored product
Offers a high degree of drilling tolerance and is the only
connector of its type to provide pull-up of cabinet panels when
tightened
Quickloc Ø20
flanged
White
Item number
Black
Technical and
mounting details
Dark brown
Connectors
·
·
·
·
06803
>
835 831 877
06806
>
835 831 877
06813
>
835 831 877
06839
>
835 831 877
Ø20
2
5
10
Ø8
9.5
Ø8
10
9.5
2500 Pcs
Made of zinc, plastic
Quickloc Ø20
flush
Ø20
11.5
Ø8
11.5
6.5
Ø8
10
9.5
2500 Pcs
Made of zinc, plastic
Quickloc Ø25
flanged
Ø25
Ø10
A
1
10.5
11
5
Ø10
13
12
1500 Pcs
Made of zinc, plastic
Quickloc Ø25
flush
A
1
Ø25
12.2
Ø10
7.5
Ø10
13
12.5
12
1500 Pcs
Made of zinc, plastic
1.18
02_titus_connectors_R_CS2.indd 1.18
8/25/10 12:57:36 PM
System 4
Fittings for
face-boring only
Flushbloc™ / Flushfix™
806
861
877
>
Black
02161
Zinc
White
Flushfix™
Item number
Silver
Technical and
mounting details
Brown beige
· The Angeldriv screw provides high level of tolerance
· Face drilling only required
· Corner joint and shelf fixing options
Other colours on request
27.5
Ø5x13
4.5
Ø25x11
2500 Pcs
12
Made of plastic
02193
Flusbloc™
assembly
>
877
835
*02190
>
835
*02164
>
835
27.5
* American market only
Other colours on request
5x13
4.5
Ø25x11
2500 Pcs
12
Made of zinc, plastic
Angeldriv
screw for use
with Flushfix™
unthumped
00021
>
885
thumped
00022
>
885
5x13
4.5
Ø25x11
12
2000 Pcs (00021)
4000 Pcs (00022)
Made of zinc
1.19
02_titus_connectors_R_CS2.indd 1.19
8/25/10 12:57:43 PM
·
·
·
·
One-piece connector range
Face drilling only required
Easy to use, foolproof home insertion
Angeldriv screw tolerates good levels of
inaccurate drilling increasing consumer
confidence
Connectors
System 4
Fittings for
face-boring only
Minibloc™ / Twinbloc™
Silver
White
Dark brown
Minibloc
Item number
Black
Technical and
mounting details
Drilling depth
D
11
02107
835
861
877
831
11
* 02120
835
861
877
831
11
02101
>
17
16
14
>
834
>
* assembly with screw
11
Other colours on request
Ø5 x 10.5
Ø10 x D
6
2500 Pcs (02107, 02101)
3000 Pcs (02120)
Made of zinc, plastic
Minibloc
17
16
13
11
02141
11
* 02144
>
>
835
835
861
877
877
* assembly with screw
Other colours on request
11
Ø5 x 13
Ø8 x D
6
3000 Pcs
Made of zinc, plastic
Twinbloc
46
17
14
11
02130
11
*02139
>
>
835
877
835
877
* assembly with screw
32
Other colours on request
11
Ø5 x 10.5
Ø10 x 11
6
1000 Pcs
Made of zinc, plastic
Angledriv screw > see page 1.19
1.20
02_titus_connectors_R_CS2.indd 1.20
8/25/10 12:57:46 PM
Fitting
278.4129.
>
825.7561.
>
Black
Brown
Item number
White
Technical and
mounting details
Zinc plated
System 4
Fittings for
face-boring only
Knock-down fittings
350 370 380
9.5
12
19
21.5
Ø10
10
6
Ø3
15.5
5000 Pcs
Made of plastic
Screw
040
Ø3.5
25
5000 Pcs
Made of steel
1.21
02_titus_connectors_R_CS2.indd 1.21
8/25/10 12:57:49 PM
System 4
Fittings for
face-boring only
Cambloc
Screw-on
Zinc plated
+ black housing
Item number
Zinc plated
+ brown housing
Technical and
mounting details
Zinc plated
+ white housing
Connectors
· Screw-on and knock-in versions are available
· Plastic housings are available in different colours
· Quick and intuitive assembly when fittings are
pre-mounted on furniture
279.9187.
>
960 970 980
279.9465.
>
960 970 980
21
47
16
32
13
7.5
1000 Pcs
Made of plastic, zinc cam
Knock-in
21
16
47
32
13
Ø10
11
Ø10
7.5
11
500 Pcs
Made of plastic, zinc cam
1.22
02_titus_connectors_R_CS2.indd 1.22
8/25/10 12:57:51 PM
System 5
Cams and dowels
System features
The most advanced
cam and dowel
range
Titus System 5 is a comprehensive
range of cam and dowel connecting
fittings with Klix and Quickfit features
for all cabinet applications:
panel-to-panel, panel-to-hollow profile,
back-to-back
Fittings are made from zinc, steel
and high grade pastic.
Dowels
• Quickfit dowels
quick hand insertion, easy assembly
• Diecast dowels (zinc)
precise manufacturing, optimal
shape and design
• Turned dowels (steel)
‘traditional’ design, smooth surface,
best strength performance
• Combi dowels (zinc and steel)
high precision of zinc, strength of
steel, 100% dimensional accuracy
and optimal performance
• Quickfit TL2, TL3 dowels
a unique solution for
factory pre-insertion,
high level of drilling tolerances
Titus Klix™
‘Klix’ (anti-rotation feature) cams with
Linear pull
· ‘Klix’ teeth give vibration resistant
holding power
· Cam and pin indents ‘lock’ on to
each other in any rotational position
· 12mm and 15mm versions
· Linear power curve for maximum
tightening power
· Constant turning force to tighten
· ‘Same cam’ compatibility with all
Titus dowel pins
Both the cam and Quickfit™ dowel
have the patented Titus Klix™ feature
- the addition of teeth to the underside
of the dowel head, which interlock
with pockets in the cam. This design
increases the mating surface area
and forms a mechanical rather than
a friction lock, with added resistance
to unwinding or loosening of the cam
after installation.
Dowel insertion
time comparison
Quickfit dowel
1
Second
2 o'clock lock
Smooth closing
Twin start thread
Combi dowel
4
Seconds
Single start thread
Standard dowel
7
Seconds
Linear cam profile assures smooth, firm
tightening action and greater pull-up.
The cam always locks at 2 o'clock
lock (230°), enabling greater consumer
confidence in use while improving
furniture quality.
1.23
02_titus_connectors_R_CS2.indd 1.23
8/25/10 12:57:53 PM
Connectors
System features
Drilling
tolerances
Optimal performance and perfect joint
even with inaccurate drillings.
Typical ETHC (EDGE TO HOLE CENTRE)
measurements
Zinc/Combi
dowel
±0.5 mm
±0.5 mm
+/-0.5mm
Number of Occurences
20
Tolerance range
18
16
14
+ / - 0.5 mm
12
10
8
6
4
2
0
Series1
23,0
23,1
23,2
23,3
23,4
23,5
23,6
23,7
23,8
23,9
24,0
24,1
24,2
24,3
24,4
24,5
24,6
24,7
24,8
24,9
25,0
0
0
3
0
5
6
4
14
4
9
10
18
15
9
11
16
7
11
8
0
3
ETHC
Quickfit TL2/TL3
measurements
Quickfit TL2
dowel
+/-1mm
min.23(33)
ETHC
max.25(35)
ETHC
Number of Occurences
20
18
16
14
+ / - 1 mm
12
10
8
6
4
2
Tolerance range
0
Series1
23,0
23,1
23,2
23,3
23,4
23,5
23,6
23,7
23,8
23,9
24,0
24,1
24,2
24,3
24,4
24,5
24,6
24,7
24,8
24,9
25,0
0
0
3
0
5
6
4
14
4
9
10
18
15
9
11
16
7
11
8
0
3
ETHC
Quickfit TL2/TL3
+/-1mm
measurements
Quickfit TL3
dowel
+/-1mm
max.25
ETHC
min.23
ETHC
Tolerance range
Number of Occurences
20
18
16
14
+ / - 1 mm
12
10
8
6
4
2
0
Series1
23,0
23,1
23,2
23,3
23,4
23,5
23,6
23,7
23,8
23,9
24,0
24,1
24,2
24,3
24,4
24,5
24,6
24,7
24,8
24,9
25,0
0
0
3
0
5
6
4
14
4
9
10
18
15
9
11
16
7
11
8
0
3
ETHC
ETHC=Edge To Hole Center
Pre-inserted dowels
Quickfit TL2 and Quickfit TL3 are the
only available dowels that allow for
factory pre-insertion
· Easier packing
· Less damages in handling
· Fits perfectly the RTA market
1.24
02_titus_connectors_R_CS2.indd 1.24
8/25/10 12:57:55 PM
System 5
Cams and dowels
Quickfit TL connectors
Drilling tolerances
Quickfit-TL™ dowel offers furniture
manufacturers a fast assembly system
providing high drilling tolerances.
It has a built-in self-adjustment feature,
which enables common drilling
inaccuracies to be overcome.
For the self-assembly furniture
consumer, Titus Quickfit-TL™ is the
most consumer friendly fitting on the
market. Apart from the benefit of fully
tightened joints and easy locking
into the same position,
Quickfit-TL™ provides an exceptionally
smooth action when tightened,
requiring very little effort.
Marginal inconsistencies of drilling
and the problems associated with the
natural movement of wood panels, no
longer present problems.
Quickfit-TL™ provides a tolerance of
+1/-1mm on drilling operation while
ensuring that the final result is a
perfectly precise and aligned joint.
No other assembly fittings system can
offer such tolerances and still maintain
a perfect joint.
Assembly
1. Press the cam into face board
2a. Either push dowel into
edge hole or...
2b. Insert the dowel into side panel
3. Assemble the panels
4. Tighten cam to lock dowel
1.25
02_titus_connectors_R_CS2.indd 1.25
8/25/10 12:57:57 PM
Connectors
Quickfit connectors
Assembly
It is the fastest assembly system on
the market. The Quickfit™ dowel may
be inserted by hand, using only finger
pressure. This eliminates the labour
intensive process of screw-in assembly
and the potential panel damage.
The Quickfit™ range of dowels has
been extended to provide a complete
family of fittings available in diameters
of 5mm, 8mm and 10mm and lenghts
of 24mm and 34mm. These dowels
are compatible with the range of Titus
Ø15mm cams.
1. Press the cam into face board
2. Insert the dowel into side panel
3. Assemble the panels
4. Tighten the cam to lock dowel
5. Assembled panels
1.26
02_titus_connectors_R_CS2.indd 1.26
8/25/10 12:57:59 PM
System 5
Cams and dowels
Zinc+steel Combi dowels
Zinc+steel
technology for
optimal strength
and performance
The Combi dowel combines steel and
a small amount of zinc to ensure high
precision and dimensional accuracy,
essential to provide furniture
manufacturers with the broadest
possible range of drilling tolerances.
toroidal head form
steel neck and head
zinc body
positive stop collar
twinstart thread
The steel neck and head provide
better resistance to torsion and pull-out
enabling a high performance joint
Zinc body:
Positive stop collar ensures correct
insertion depth
Twinstart for faster and more stable
insertion
Cam
small bursting angle
The toroidal dowel head form
transfers the forces between cam
and dowel more effectively resulting
in a small cam bursting force.
Dowel
100% dimensional accuracy
assured
te
ra
cu
0%
ac
10
1.27
02_titus_connectors_R_CS2.indd 1.27
8/25/10 12:58:01 PM
System 5
Cams and dowels
Quickfit-TL dowels
Quickfit-TL2
ØD2 x 12
Connectors
D2
24
5
05453
>
880
34
5
05503
>
880
24
8
05441
>
880
34
8
05474
>
880
24
8
05395
>
Dark grey
Item number
S-tan
Drilling
diameter for
dowel thread
Technical and
mounting details
A
Drilling distance
· Available in Ø5mm and Ø8mm for panel-to-panel
applications
· Suitable for use with all Ø15mm Cam2000 and Cam3000
products
· ‘Klix’ locking feature provides a strong, vibration proof joint
· Highly tolerant in edge-inserted, TL3 also in face-inserted
applications
Ø8
A
Edge to hole
tolerance
min.23(33)
ETHC
max.25(35)
ETHC
Tolerance range
2000 Pcs
1000 Pcs (05474)
Made of zinc, plastic
Quickfit-TL3
871
ØD2 x 12
Ø8
A
Hole to hole tolerance
±1 mm
Edge to hole
tolerance
max.25
ETHC
min.23
ETHC
Tolerance range
2000 Pcs
Made of zinc, plastic
1.28
02_titus_connectors_R_CS2.indd 1.28
8/25/10 12:58:03 PM
System 5
Cams and dowels
Quickfit dowels
A
ØD2
Ø8
12
Item number
24
5
05714
>
880
34
5
05685
>
880
20
8
05556
>
880
24
8
05563
>
880
28
8
05552 >
880
34
8
05554
>
880
24
10
05810
>
24
10
*05570
34
10
05572
>
Dark grey
Drilling diameter for
dowel thread
Quickfit dowels
D2
Drilling
distance
Technical and
mounting details
A
Light grey
· Available in Ø5mm, Ø8mm and Ø10mm for panel-to-panel
applications
· Suitable for use with all Ø15mm Cam2000 and Cam3000
products
· ‘Klix’ locking feature provides a strong, vibration proof joint
· Depth stop collar for accurate insertion
882
880 882
>
882
* American market only
2000 Pcs
3000 Pcs (05810)
1000 Pcs (05572)
Made of zinc, plastic
1.29
02_titus_connectors_R_CS2.indd 1.29
8/25/10 12:58:05 PM
System 5
Cams and dowels
Quickfit-P2F dowels
Connectors
· The only product to enable standard panel drilling and
connection of panel and hollow profile
· Available in Ø8mm for panel-to-hollow profile
applications
· Suitable for use with all Ø15mm Cam2000 and Cam3000
products
· ‘Klix’ locking feature provides a strong, vibration proof joint
Quickfit - P2F
Ø7.8
Item number
Black
Technical and
mounting details
Drilling
distance
A
24
05414
835
>
Ø8
10
Ø8 x thru
Ø8
A
1.0 - 1.5 approx.
2000 Pcs
Made of zinc, plastic
1.30
02_titus_connectors_R_CS2.indd 1.30
8/25/10 12:58:07 PM
System 5
Cams and dowels
Combi dowel
· High quality zinc-steel dowel with greater resistance to
torsion and pull-out
· Suitable for use with all Ø12mm and Ø15mm Cam2000
and Cam3000 products
· ‘Klix’ locking feature provides a strong, vibration proof
joint
· Twinstart thread for faster and reliable insertion
Thread
length
11
09435
>
885
28
9.5
09588
>
885
24
11
09443
>
885
24
8.5
09583
>
885
Philips PH2 head
34
11
*09424 >
885
Philips PH2 head
24
11
*09423
>
885
Philips PH2 head
20
11
*09422
>
885
Philips PH2 head
34
8.5
*09456
>
885
A
Ø5
* American market only
1000 Pcs
*2000 Pcs
Zinc
Drilling
distance
34
Combi dowel
12
N
Item number
Technical and
mounting details
Ø7-8
A
Made of steel and zinc
M6
Combi dowel M6
Ø5.8
34
8
09592
>
885
34
10.5
09594
>
885
N
A
Combi dowel M6, A=24
Item number 09879 - 883
Available in steel only
Thread length=8mm
Ø7-8
1000 Pcs
Inserts
Made of zinc
Made of steel and zinc
> see page 1.59
Inserts
Made of plastic
> see page 1.60
1.31
02_titus_connectors_R_CS2.indd 1.31
9/3/10 8:52:04 AM
System 5
Cams and dowels
Double-ended dowel
ØD1
A
A
B
24
0*
7-8
05929
>
885
34
0*
7-8
05757
>
885
24
15
7-8
05592
>
883
34
16
7-8
05858
>
883
34
18
7-8
05859
>
883
34
19
7-8
05753
>
883
24
16
7-8
05857
>
883
24
19
7-8
05778
>
883
Zinc
Item number
Zinc plated
Drilling diameter
for dowel body
Dowel
without circlip
D1
Panel
thickness
Technical and
mounting details
B
Drilling
distance
A
Connectors
· Available in Ø7mm
· Suitable for use with all Ø12mm and Ø15mm
Cam2000 and Cam3000 products
· No circlip for increased tolerance
· Available in a variety of lengths to suit most panel-topanel applications
*B=0 > no panel required
500 Pcs
1000 Pcs (05859, 05753)
2000 Pcs (05474, 05592)
Made of steel or zinc
Dowel with
circlip
ØD1
A
A
34
16
7-8
05752
>
883
34
18
7-8
05772
>
883
34
19
7-8
05751
>
883
24
16
7-8
05775
>
883
24
19
7-8
05774
>
883
B
250 Pcs (05772)
500 Pcs (05752)
1000 Pcs
Made of steel
1.32
02_titus_connectors_R_CS2.indd 1.32
8/25/10 12:58:11 PM
System 5
Cams and dowels
Angled dowels
Technical and
mounting details
Angled
dowel
Item number
Zinc plated
· Suitable for applications requiring angled joints
· Suitable for use with all Ø12mm and Ø15mm
Cam2000 and Cam3000 products
· Adjustable angle from 90° to 180°
05860
883
>
Ø15
44
Ø7-8
44
B/2
B
44
x
Made of steel
650 Pcs
Distance x in mm
20° 25° 30° 35° 40°
B
45° 50° 55° 60° 65° 67,5° 70°
13
61.9 57.9 55.3 53.5 51.7 50.5 49.5 48.6 47.8 47
15
64.6 60.1 57 54.7 52.9 51.5 50.3 49.3 48.3 47.5 47.1 46.7
75°
80°
85°
46.7 46.4 45.7 45.1 44.6
46
45.3 44.7
16
66 61.2 57.9 55.4 53.5
52 50.7 49.6 48.6 47.7 47.3 46.9 46.1 45.4 44.7
18
68.8 63.3 59.6 56.9 54.7
53 51.6 50.3 49.2 48.2 47.7 47.3 46.4 45.6 44.8
19
70.1 64.4 60.5 57.6 55.3 53.5 52 50.7 49.5 48.4 47.9 47.5 46.5 45.7 44.8
22
74.2 67.6 63.1 59.7 57.1
23
75.6 68.7 63.9 60.4 57.7 55.5 53.6 52.1 50.6 49.4 48.8 48.2 47.1
55 53.2 51.7 50.4 49.1 48.6
48
46.9 45.9
46
45
45
x
1.33
02_titus_connectors_R_CS2.indd 1.33
8/25/10 12:58:14 PM
System 5
Cams and dowels
End dowels
‚
S
L
Item number
24
16
7-8
36.5
40.5
05608
>
885
24
19
7-8
39.5
43.5
05609
>
885
34
16
7-8
46.5
50.5
05610
>
885
34
19
7-8
49.5
53.5
05611
>
885
24
16
7-8
36
39
05786
>
885
24
19
7-8
39
42
05787
>
885
34
16
7-8
46
49
05090
>
885
34
19
7-8
49
52
05091
>
885
Zinc
Total length
Ø7
D1
Length
Mushroom
dowel
B
Drilling diameter
for dowel body
Technical and
mounting details
A
Panel
thickness
#AM
#ONNECTORS
Connectors
‚
Drilling
distance
-USHROOM$OWELS
· Available in a variety of head and length combinations to
suit most end panel applications
· Suitable for use with all Ø12mm and Ø15mm Cam2000
and Cam3000 products
· ‘Klix’ locking feature provides a strong, vibration proof joint
· Both ‘mushroom’ and countersunk headed versions
#ONNECTORS
available
Ø11
Ø5.9
S
L
ØD1
A
1000 Pcs
B
Made of zinc
Countersunk
dowel
Ø7
Ø5.9
Ø11
S
L
ØD1
A
1000 Pcs
B
Made of zinc
1.34
02_titus_connectors_R_CS2.indd 1.34
8/25/10 12:58:16 PM
System 5
Cams and dowels
Ø15mm Cam3000
Cam3000
PZ2 drive
Zinc corrosil
E
15/16 12.5
7.5-8
09490
>
885 897
12/13 10.5
6 min
09495
>
885 897
Zinc
Item number
Panel
thickness
Technical and
mounting details
D
Drilling for
dowel
B
Drilling
depth
· Its optimised shape provides a more efficient cam profile
with smooth tightening action and greater dowel pull-up
· Suitable for use with Combi dowels, forged steel dowels,
Quickfit dowels and Quickfit TL2 dowels
· ‘Klix’ locking feature provides a strong, vibration proof joint
· Cam-retaining pips ensure that a cam is held in panel
position prior to assembly
Use cover caps 277.4355. or 01029 > see page 1.58
Ø15
Ø15xD
E
B
1000 Pcs
Made of zinc
Cam3000
combined drive with HEX
15/16 12.5
7.5-8
09499
>
885 897
18/19 14
9-9.5
09492
>
885 897
Use standard cover caps with pin=Ø4mm
Ø15
Ø15xD
E
B
1000 Pcs
Made of zinc
1.35
02_titus_connectors_R_CS2.indd 1.35
8/25/10 12:58:18 PM
System 5
Cams and dowels
Ø15mm Cam3000 S
PZ2 drive
Connectors
Zinc corrosil
Zinc
Cam3000 S/15
E
Item number
7.5-8
09491
>
885 897
12 min 9.5 min 6 min
09406
>
885 897
Panel
thickness
Technical and
mounting details
D
Drilling for
dowel
B
Drilling
depth
· Innovative design offers optimal performance
with maximum cost effectiveness
· Suitable for use with Combi dowels, forged steel dowels
and Quickfit dowels
· ‘Klix’ locking feature provides a strong, vibration proof joint
· Cam-retaining pips ensure that a cam is held in panel
position prior to assembly
15/16 12.5
11.9
Ø15
Ø15xD
E
B
1000 Pcs
Made of zinc
PZ2 drive
Cam3000 S/12
9
5
Ø15
Ø15xD
E
B
1000 Pcs
Made of zinc
1.36
02_titus_connectors_R_CS2.indd 1.36
8/25/10 12:58:21 PM
System 5
Cams and dowels
Ø15mm Cam2000
Cam2000
Ø15
Ø15
Ø15xD
Zinc
Drilling for
dowel
Item number
Zinc plated
E
Nickel
D
Drilling
depth
Technical and
mounting details
B
Panel
thickness
· Available in a variety of head, drive recess and board
thickness versions to suit most applications
· Suitable for use with all Titus dowels
· “Klix” locking feature provides a strong, vibration proof joint
· Linear cam profile results in smooth, easy cam rotation and
dowel pull-up
22/23 16
11-11.5
05657
>
847 883 885
25/26 17.9
12.5-13
05676
>
847 883 885
28/29 19.4
14-15.5
05678
>
847 883 885
29
14.5
05679
>
847 883 885
19.4
Other finishes on request
E
B
500 Pcs
1000 Pcs (05657)
Made of zinc
Cam2000
Ø15 headed
12
10min
6
*05586
13
10.9min
6.5
05652
>
847 883 885
16
12.9
8
05658
>
847 883 885
19
14.4
9.5
05659
>
847 883 885
23
16.4
11.5
05675
>
847 883 885
26
18
13
05677
>
847 883 885
>
847 883 885
Ø17
1 mm
Ø15
Ø15xD
E
B
Other finishes on request
*Ultraflat - specially designed for thin panels (does not work with TL dowels)
500 Pcs (05675, 05677)
1000 Pcs
Cover caps for Cams
Made of plastic
Made of zinc
> see page 1.58
1.37
02_titus_connectors_R_CS2.indd 1.37
8/25/10 12:58:24 PM
System 5
Cams and dowels
Ø12mm Cam2000
Drilling for
dowel
Connectors
E
>
838 847 885 897
15/16 12
7.5-8
05578
>
885
18/19 13 min 9-9.5
05580
>
885
Corrosil
zinc
05575
Zinc
12/13 10 min 6-6.5
Nickel
plated
Item number
Black painting
plate
Cam2000
Ø12
D
Drilling
depth
Technical and
mounting details
B
Panel
thickness
· Suitable for all Titus screw-in dowels
· Available in a variety of head, drive recess and board
thickness versions to suit most applications
· Particularly suited to drawer front attachment
applications
· ‘Klix’ locking feature provides a strong, vibration proof
joint
· Linear cam profile results in smooth, easy cam rotation
and dowel pull-up
Other finishes on request
Ø12
Ø12 x D
E
B
2000 Pcs
Made of zinc
Cam2000
Ø12 headed
12
9.2 min 5.25
05574
>
838 847 885 897
12
10 min 6
05576
>
885
16
12.5
8
05579
>
885
19
14
9.5
05581
>
885
Ø14
1 mm
Other finishes on request
Ø12
Ø12 x D
E
B
1000 Pcs
2000 Pcs (05576)
Cover caps for Cams
Made of plastic
Made of zinc
> see page 1.58
1.38
02_titus_connectors_R_CS2.indd 1.38
8/25/10 12:58:28 PM
System 5
Cams and dowels
Vitro
12
15/16
Item number
Silver grey
E
Drilling for
dowel
Vitro
D
Drilling
depth
Technical and
mounting details
B
Panel
thickness
· Made of high glass fiber content resin to provide
optimised recess
· Suitable for use with Titus Combi dowels and forged
steel dowels
· “Klix” locking feature provides a strong, vibration proof joint
· Linear cam profile results in smooth, easy cam rotation and
dowel pull-up
7.5
09431
886
>
Ø15
Ø15xD
E
B
10000 Pcs
Made of high grade plastic
1.39
02_titus_connectors_R_CS2.indd 1.39
8/25/10 12:58:30 PM
Connectors
1.40
02_titus_connectors_R_CS2.indd 1.40
8/25/10 12:58:32 PM
System 6
Quickfit-Expando
connectors
System features
A face boring connector family for
32mm system drilling with full range of
panel and application variants for all
cabinet manufacturing applications
System 6 consists of a range of
20mm and 25mm diameter housings,
Quickfit™ and conventional dowels,
end dowels and double ended dowels.
· Minimum drilling requirements
· Linear cam design for constant
tightening loads when driving
· Angledriv feature on cam for
maximum driving comfort
· Interchangeable pins for wood,
plastic and steel applications
· Pins with twinstart drive for fast
insertion
· Interchangeable Quickfit pin
fastenings available
· Toolless fastening capable versions
· Back-to-back fastenings for
common vertical panel fixing of
shelves
Housings are made from high grade
plastic or zinc, with zinc cams.
Applications
Titus System 6 is ideal for use in
high volume production of case
goods, closet and garage storage
systems. Because no edge boring
is required, it is an excellent choice
for manufacturing environments with
limited drilling capacity.
Side-entry
Drop-on
Side-entry insertion of shelf panel:
from the side or from the top
Drop-on insertion of shelf panel:
only from the top
Using drop-on connections allows
for one-man installation
Wedgefix-6 connector is a special
fastener without cam, simply to snap
onto a pre-inserted dowel.
1.41
02_titus_connectors_R_CS2.indd 1.41
8/25/10 12:58:32 PM
Connectors
System features
Outrigger/
Non outrigger
Outrigger
Non outrigger
Expando function
Expanding housings and dowels
provide a tight joint.
Assembly
1. Press the housing into face board
2. Press the dowel into side panel
3. Assemble the panels
4. Tighten the joint
1.42
02_titus_connectors_R_CS2.indd 1.42
8/25/10 12:58:32 PM
System 6
Quickfit-Expando
Expanding dowels
· Available in Ø5mm, Ø8mm and Ø10mm for panelto-panel, panel-to-hollow profile and back-to-back
applications
· Suitable for applications with all Titus Ø20 and/or
Ø25mm Expando-6 housings
· ‘Klix’ locking feature provides a strong, vibration proof
connection
· Depth stop collar for accurate insertion
Dowel Ø5 and Ø8
ØD2 x 12.5
5000 Pcs
06408
>
880
8
06410
>
880
06479
>
880
06477
>
Zinc
5
Black
Item number
Dark grey
Technical and
mounting details
Drilling diameter
for dowel thread
D2
Made of zinc, plastic
Ø5 x 7.5
back-to-back
applications
Ø5 x 7.5
5000 Pcs
Made of zinc, plastic
Ø8 x thru
panel-to-frame
applications
835
Ø8 x thru
4000 Pcs
Made of zinc, plastic
1.43
02_titus_connectors_R_CS2.indd 1.43
8/25/10 12:58:34 PM
System 6
Quickfit-Expando
Dowels
Connectors
· Available in various Ø3mm and/or Ø5mm thread
forms for screw-in, knock-in and/or ‘spiked’ hole
applications
· Suitable for applications with all Titus Ø20mm and/
or Ø25mm Expando-6 housings
· ‘Klix’ locking feature provides a strong, vibration
proof connection
· Dowels feature an integral skirt which acts as a
positive stop during insertion
Dowel
Ø5xC
2000 Pcs
9
06401
>
885
8
06402
>
885 883
11.5
06406
>
885 883
11.5
06403
>
885
06405
>
883
06495
>
883
Zinc
plated
Item number
Zinc
Technical and
mounting details
Drilling length
for dowel thread
C
Made of zinc or steel
Ø5 x 11
knock-in
Ø5x12
2000 Pcs
Made of zinc
M4 x 7
M4x7.5
4500 Pcs
Made of steel
11.5
Ø3 x 11.5
Ø3 max
12500 Pcs
Sleeves
Made of brass
Made of steel
> see page 1.53
Inserts
Made of plastic
> see page 1.60
1.44
02_titus_connectors_R_CS2.indd 1.44
8/25/10 12:58:36 PM
System 6
Quickfit-Expando
Double-ended dowels
· For 16mm, 18mm and 19mm board
· Suitable for applications with all Titus Ø20mm and/
or Ø25mm Expando-6 housings
· ‘Klix’ locking feature provides a strong, vibration
proof connection
Double-ended
dowel
Ø4.8
Ø5.8
Item number
Zinc
Technical and
mounting details
Panel
thickness
B
16
06414
>
885
18
06413
>
885
19
06416
>
885
B
Ø5 x thru
2500 Pcs
5000 Pcs (06413)
Made of zinc
1.45
02_titus_connectors_R_CS2.indd 1.45
8/25/10 12:58:39 PM
System 6
Quickfit-Expando
End dowels
Connectors
· For 16mm, 18mm and 19mm board
· Suitable for applications with all Titus Ø20mm and/
or Ø25mm Expando-6 housings
· ‘Klix’ locking feature provides a strong, vibration
proof connection
End dowel
Item number
Zinc
Technical and
mounting details
Panel
thickness
B
16
06412
>
885
18
06411
>
885
19
06415
>
885
1.5
Ø9.5
Ø4.8
B
Ø5 x thru
2000 Pcs
1000 Pcs (06411)
Made of zinc
1.46
02_titus_connectors_R_CS2.indd 1.46
8/25/10 12:58:40 PM
System 6
Quickfit-Expando
20mm expanding housing
non-outrigger
Ø20 x D
22
12.5
06451
>
847
18/19
14
06453
>
847
15/16
12.5
06435
>
831
861 877
18/19
14
06437
>
831
861 877
White
plastic
15/16
Silver
plastic
Item number
Nickel
plated
Drilling
depth
Side-entry
D
Panel
thickness
Technical and
mounting details
B
Dark
brown plastic
· Available in 15mm/16mm and 18mm/19mm
versions for drop-on and/or side-entry applications
· Available in all-metal or plastic/metal options
· ‘Klix’ locking feature provides a strong vibration
proof connection
· Compatible with all screw-in and Quickfit-6 dowels
B
9.5
500 Pcs
Made of zinc
Side-entry
Ø20 x D
22
Other colours on request
B
9.5
2500 Pcs
Made of plastic
Drop-on
Ø20 x D
22
15/16
12.5
06447
>
847
18/19
14
06449
>
847
15/16
12.5
06431
>
831
861 877
18/19
14
06433
>
831
861 877
B
9.5
500 Pcs
Made of zinc
Drop-on
Ø20 x D
22
Other colours on request
B
9.5
2500 Pcs
Made of plastic
1.47
02_titus_connectors_R_CS2.indd 1.47
8/25/10 12:58:41 PM
System 6
Quickfit-Expando
20mm expanding housing
outrigger
Side-entry
22
Connectors
Dark
brown plastic
D
12.5
06459
>
847
18/19
14
06461
>
847
15/16
12.5
06443
>
831 835
877
18/19
14
06445
>
831 835
877
White
plastic
15/16
Nickel
plated
Item number
Black
plastic
Drilling
depth
Technical and
mounting details
B
Panel
thickness
· Available in 15mm/16mm and 18mm/19mm
versions for drop-on and/or side-entry applications
· Available in all-metal or plastic/metal options
· ‘Klix’ locking feature provides a strong vibration
proof connection
· Compatible with all screw-in and Quickfit-6 dowels
Ø10 x 10.5 Ø20 x D
B
32
500 Pcs
9.5
Made of zinc
Side-entry
22
Ø10 x 10.5 Ø20 x D
Other colours on request
B
32
1250 Pcs
9.5
Made of plastic
Drop-on
22
15/16
12.5
06455
>
847
18/19
14
06457
>
847
15/16
12.5
06439
>
831 835
877
18/19
14
06441
>
831 835
877
Ø10 x 10.5 Ø20 x D
B
32
500 Pcs
9.5
Made of zinc
Drop-on
22
Ø10 x 10.5 Ø20 x D
Other colours on request
B
32
9.5
2500 Pcs (06439)
1250 Pcs (06441)
Made of plastic
1.48
02_titus_connectors_R_CS2.indd 1.48
8/25/10 12:58:46 PM
System 6
Quickfit-Expando
Expanding Wedgefix
housing (no inner cam)
For use with
screw-in
dowels
D
06470
>
877
15/16
12.5
06473
>
877 835 831 861
18/19
14
06465
>
877 835 831 861
22
16
06464
>
861
Silver
10
Dark
brown
12
Black
Item number
White
Drilling
depth
Technical and
mounting details
B
Panel
thickness
· Available in 12mm, 15mm/16mm and/or 18mm/
19mm versions for Quickfit-6 and/or Standard
Dowel applications
· Available in a variety of plastic colours
· Wedgefix-6 housing allows easy customer handassembly or factory automated insertion
· When used with Quickfit-6 dowels this provides a
true toolless fastening system
22
Other colours on request
Ø20 x D
B
9.5
2500 Pcs
Made of plastic
For use with
Quickfit
dowels
15/16 12.5
06471
>
877 835 831 861
18/19 14
06472
>
877 835 831 861
Other colours on request
22
Ø20 x D
B
9.5
2500 Pcs
Made of plastic
1.49
02_titus_connectors_R_CS2.indd 1.49
8/25/10 12:58:51 PM
Side-entry
D
15/16
12.5
06381
>
861 877
18/19
14
06385
>
861 877
22
White
plastic
Item number
Silver
plastic
Drilling
depth
Technical and
mounting details
B
Connectors
· Available in 15mm/16mm and 18mm/19mm
versions for drop-on and/or side-entry applications
· Available in all-metal or plastic/metal options
· ‘Klix’ locking feature provides a strong vibration
proof connection
· Compatible with all screw-in and Quickfit-6 dowels
Panel
thickness
System 6
20mm knock-in housing
non-outrigger
Product available on American
and Asian market only
Other colours on request
Ø20 x D
B
9.5
2500 Pcs
Made of plastic
Drop-on
15/16
12.5
06383
>
861 877
18/19
14
06387
>
861 877
22
Product available on American
and Asian market only
Other colours on request
Ø20 x D
B
9.5
2500 Pcs
Made of plastic
Cover cap 06463
Made of plastic
1.50
02_titus_connectors_R_CS2.indd 1.50
8/25/10 12:58:53 PM
System 6
Quickfit-Expando
25mm heavy duty
expanding housing
non-outrigger
Side-entry
Item number
Nickel
plated
E
Drilling for
dowel
Technical and
mounting details
D
Drilling
depth
· Suitable for 12mm, 15mm/16mm and 18mm/19mm
board for drop-on and/or side-entry applications
· All-metal
· ‘Klix’ locking feature provides a strong vibration proof
connection
· Compatible with all System 6 Quickfit dowels
11
5
06953
>
847
11
5
06949
>
847
27.5
Ø25 x D
E
12
500 Pcs
Made of zinc
Drop-on
27.5
Ø25 x D
E
12
500 Pcs
Made of zinc
Dowels > see page 1.43
1.51
02_titus_connectors_R_CS2.indd 1.51
8/25/10 12:58:56 PM
System 6
Quickfit-Expando
25mm heavy duty
expanding housing
outrigger
Item number
11
5
06951
>
847
11
5
06947
>
847
Nickel
plated
Drilling for
dowel
Side-entry
E
Drilling
depth
Technical and
mounting details
D
Connectors
· Suitable for 12mm, 15mm/16mm and 18mm/19mm
board for drop-on and/or side-entry applications
· Available in all-metal
· ‘Klix’ locking feature provides a strong vibration proof
connection
· Compatible with all System 6 Quickfit dowels
27.5
Ø10 x 11
Ø25 x D
E
32
400 Pcs
12
Made of zinc
Drop-on
27.5
Ø10 x 11
Ø25 x D
E
32
500 Pcs
12
Made of zinc
Dowels > see page 1.43
1.52
02_titus_connectors_R_CS2.indd 1.52
8/25/10 12:58:58 PM
System 6
M4 connecting sleeves
Sleeve
Ø5
Item number
15
270.2046.
>
400
17
270.2047.
>
400
28
385.2166.
>
400
31
385.2252.
>
400
35
385.2237.
>
400
43
385.2169.
>
400
Raw
Technical details
Length
L
M4
L
10000 Pcs
Made of brass
Sleeve
M4
Ø5
12
L
5000 Pcs
Made of brass
1.53
02_titus_connectors_R_CS2.indd 1.53
8/25/10 12:58:59 PM
System 7
Heavy duty Ø20mm
Cam and dowel
Connectors
· Dowel available with Ø10mm eurothread and cam
available in Ø20mm for a variety of panel thicknesses
· ‘Klix’ locking feature provides strong, vibration proof
joint
· High strength product that eliminates the need for time
consuming metal inserts
Technical and
mounting details
Cam Ø20
Item number
Zinc
Panel
thickness
B
05409
>
885
18 min 05410
>
885
18
B/2
B
500 Pcs
15
Made of zinc
Dowel Ø7
Ø10 mm thread
Ø8
10
B
34
13
B
500 Pcs
Made of zinc
1.54
02_titus_connectors_R_CS2.indd 1.54
8/25/10 12:59:01 PM
System 7
Heavy duty Ø25mm
Cam and dowel
Cam not compatible with other dowels
Technical and
mounting details
Item number
Cam
Zinc plated
blue
For 13mm and thicker panels
Cam drilling distance is 34mm
A flat slot screwdriver must be used for cam tightening
Decorative cover caps are available in different colours
Dowel for direct installation in 5mm holes
Raw
·
·
·
·
·
275.3096.
>
600
275.2209.
>
040
275.2030.
>
000 040
34
12
Ø25
1000 Pcs
Made of zinc
Dowel with
euro thread
34
Ø5
Ø7.5
1000 Pcs
12
Made of steel
M6 dowel
34
Ø10
Ø7-8
1000 Pcs
Cover cap
Made of plastic
13
Made of steel
> see page 1.58
Inserts
Made of plastic
> see page 1.60
1.55
02_titus_connectors_R_CS2.indd 1.55
8/25/10 12:59:02 PM
System 7
Heavy duty dowels
52-B
End dowel
275.2146.
>
Brass plated
black
Item number
Zinc plated
blue
Raw
Technical and
mounting details
B
Panel
thickness
Drilling
distance
A
Connectors
Heavy duty only. Can’t be used
with other cams.
040 *085
* Available upon special request
Ø10
> see chapter Important Information
1
A
Ø7-8
Ø25
B
500 Pcs
Made of steel
Dowel
with
circlip
A
34
20
275.0103.
>
040
34
17
275.0106.
>
040
34
20
275.2057.
>
000 040
34
18
275.2058.
>
040
A
Ø7-8
B
500 Pcs
Made of steel
Dowel
without
circlip
A
A
Ø7-8
B
500 Pcs
Made of steel
1.56
02_titus_connectors_R_CS2.indd 1.56
8/25/10 12:59:04 PM
High performance fastener
Thread design gives repeatability
Multi-drive recess
Higher than average pull up
Technical and
mounting details
M6 Dowel 7x34
Item number
05971
>
883
05960
>
05917
>
Zinc
·
·
·
·
Zinc plated
System 7
High strength connectors
Contract fix™ system
Ø7-8
7.5/9
34
1000 Pcs
Made of steel
Prekrivanje
Housing
cylinder
15x12
885
Ø15x12.5/14
1000 Pcs
Made of zinc
Grub screw
885
Ø15x12.5/14
2500 Pcs
Inserts
Made of zinc
Made of zinc
> see page 1.59
1.57
02_titus_connectors_R_CS2.indd 1.57
8/25/10 12:59:07 PM
Accessories for
connectors
Cover caps
Connectors
· Available in a variety of colours
· Suitable for use with both pozi and hex cam
drive features
· Suitable for use with various diameter cams
· Both domed and flat versions available
3.3
*01029
834 835 867 882
X
2.5
277.4355.
Ø3.2
>
370 390 330 380
*American market only
Other colours on request
Suitable for cams with Pozi 2 recess
Ø15
25000 Pcs
>
Light grey
Dark brown
Ø17
Black
Item number
Technical and
mounting details
Cover cap
Ø17
Light brown
X
Made of plastic
Cover cap
Ø17
Ø17
277.4225.
>
370 390 330 380
2.5
Other colours on request
Ø4.2
Suitable for cams with Hex recess
Ø15
50000 Pcs
Made of plastic
Cover cap
Ø29.5
Ø29.5
275.4034.
>
370 390 330 380
Other colours on request
Ø25
10000 Pcs
Made of plastic
1.58
02_titus_connectors_R_CS2.indd 1.58
8/25/10 12:59:09 PM
Technical and
mounting details
Raw
Accessories for
connectors
Inserts
Item number
Ø8 x 9
408.3166.
>
600
Ø8
M6
9
5000 Pcs
Made of zinc
Ø9 x 13
408.3391
6
5000 Pcs
>
600
Ø9.5
Made of zinc
Ø9.5 x 18
M6
6
408.3423.
>
600
408.3424.
>
600
Ø9.5
18
1000 Pcs
Made of zinc
Ø12 x 15
M8
8
Ø12
15
1000 Pcs
Made of zinc
1.59
02_titus_connectors_R_CS2.indd 1.59
8/26/10 9:23:39 AM
Connectors
· Available in both zinc and plastic for use in various
applications
· Suitable for use with various threaded dowels
· Suitable for use with various panel thicknesses
· Knock-in and screw-in versions available
Ø10 x 13/M6 nut
M6
13
275.4035.
>
200
11
275.4058.
>
200
276.4036.
>
200
Natural
Item number
Raw
Technical and
mounting details
Drilling length
for insert
C
Ø10
C
M6
20000 Pcs (275.4035.)
30000 Pcs (275.4058.)
Made of plastic
Ø8 x 10/M4 nut
M4
Ø8
10
50000 Pcs
Made of plastic
Euro thread
single start thread
02172
>
846
twinstart thread
02182
>
846
Ø10
12
10000 Pcs
Made of plastic
1.60
02_titus_connectors_R_CS2.indd 1.60
8/25/10 12:59:13 PM
03_glissando_soft_closing_R_CS2.2.1 2.1
8/25/10 12:38:09 PM
Glissando
Soft-closing systems
03_glissando_soft_closing_R_CS2.2.2 2.2
8/25/10 12:38:10 PM
Glissando
Product guide
Page
Glissando for concealed hinges
Hinge attached soft-closing solution
Glissando TL
Glissando BS
2.13
· effortless silent and safe door
closing
· fits the hinge’s standard drilling
patterns
· easy retro-fit installation
· adjustable to different door sizes
and weights
· perfect door motion
· doesn’t occupy additional space
inside the cabinet
Stand-alone door soft-closing solution
Glissando MS
Glissando 170
Glissando FF
2.15
· effortless silent and safe door
closing
· easy retro-fit installation
· adjustable to different door sizes
and weights
· perfect door motion
Air-piston damper
Glissando PD
2.17
· silent and safe door closing
· different mounting options
· retro-fit installation
· easy mounting
Glissando for drawers
Titusoft
· self closing and soft closing
in single mechanism
· safe drawer closing
· easy add on to existing
drawer slides
2.19
2.3
03_glissando_soft_closing_R_CS2.2.3 2.3
8/25/10 12:39:41 PM
Soft-closing systems
2.4
03_glissando_soft_closing_R_CS2.2.4 2.4
8/25/10 12:39:41 PM
Glissando
for concealed hinges
Information
How to choose the right Glissando?
TitusPlus Glissando soft closing system
is available for the whole range of hinge
applications. The user can choose
between hinge attached solutions or
stand-alone applications.
Hinge attached soft-closing solutions Stand-alone door soft-closing solution
Concealed hinges
Glissando TL
Glissando BS
ST free 110
Glissando MS
X
X
X
ST plus 125
X
X
X
ST 110
X
X
X
ST 110/15°
X
X
ST 110/24°
X
X
ST 110/30°
X
X
ST 110/45°
X
X
ST 110/90°
X
X
ST 110
X
for aluminium frame door
Adapter required
ST 170
X
Basic 110
X
X
Basic 110/30°
X
X
Basic 110/45°
X
X
Basic 110/90°
X
X
for aluminium frame door
X
X
Adapter required
Basic 170
Miniprimat 95
Miniprimat 95
for glass door
Hinges for face
frame cabinets
Glissando FF
X
ST plus 110
Basic 110
Glissando 170
X
X
X
Adapter required
X
2.5
03_glissando_soft_closing_R_CS2.2.5 2.5
8/25/10 12:39:42 PM
Soft-closing systems
Glissando TL ‘one for all’
· One item fits multiple applications
· Same item can be used on all
crankings and angled hinges
· Adjustable damping force enables
perfect functioning on every door
ST plus 110
0mm
ST 110
0mm
ST plus 110
9mm
· Designed to fit the concealed hinge cup
· Toolless mounting
· Suitable for different types of cabinets
for kitchens, living rooms, bathrooms
and other furniture
Basic 110
0mm
Basic 110
9mm
ST 110
9mm
ST 110
15mm
Basic 110
15mm
ST 110/15°
9mm
Basic 110/30°
9mm
ST 110/24°
9mm
Basic 110/45°
9mm
ST 110/30°
9mm
Basic 110/45°
18mm
ST 110/45°
9mm
ST 110/45°
18mm
Basic 110/90°
0mm
Basic 110/90°
18mm
ST 110/90°
18mm
2.6
03_glissando_soft_closing_R_CS2.2.6 2.6
8/25/10 12:39:42 PM
Glissando
for concealed hinges
Information
TitusPlus Glissando soft closing
devices can not be used with
free-swinging door hinges.
> see page 3.18 for details
How many Glissandos per door?
Glissando hinge attached soft-closing system
Glissando BS
Glissando TL
Mount Glissando on the bottom
hinge in case of 2 hinges on the
door or on the middle hinge in case
of 3 hinges on the door.
Glissando
cm
250
5
200
4
150
3
100
50
2
2
3
4
5
N
Recommended number per door and positioning
Glissando stand-alone door soft-closing system
Glissando 170
Glissando FF
Glissando MS
Mount Glissando close to the
bottom hinge in case of 2 hinges
on the door or close to the middle
in case of 3 hinges on the door.
Glissando
cm
250
5
200
4
150
3
100
50
2
2
3
4
5
N
Recommended number per door and positioning
2.7
03_glissando_soft_closing_R_CS2.2.7 2.7
8/25/10 12:39:46 PM
Soft-closing systems
How to mount Glissando?
Tool-less mounting
Glissando TL
Simple toolless assembly:
Insert Glissando into the holes on the
hinge and press down with hand.
The tool-less ‘snap on’ version for
reduced assembly time and flexibility
of application. Glissando TL can be
mounted at any time after furniture
assembly so can be offered as a retro
fit option by the installer.
Screw-on on the hinge cup
Glissando BS
Glissando BS system is mounted
on the hinge cup by using cup fixing
screws. The fixing screws must be at
least 15mm long.
Screw-on on the cabinet side
Glissando 170
Glissando MS
Glissando FF
Glissando is mounted on the cabinet
side (Glissando FF on cabinet frame)
by using chipboard screws at least
15mm long.
Glissando dampers’ discreet design
enhances the look of the door and
occupies minimal space in the cabinet
interior.
2.8
03_glissando_soft_closing_R_CS2.2.8 2.8
8/25/10 12:39:46 PM
Adjustment of the damping force
Glissando TL
Glissando BS
Glissando 170
Glissando FF
Glissando MS
Glissando features quarter turn
adjustment to provide optimal closing
speed for any door dimensions and
weight.
The damping function can be adjusted
to fit different door weights which
enables
· perfect door functioning
· use of the same type of Glissando for
various doors
Adjustable damping zone and force
Turn towards ‘+’ to increase and ‘-’
to decrease the damping force
2.9
03_glissando_soft_closing_R_CS2.2.9 2.9
8/25/10 12:39:51 PM
Soft-closing systems
Lama damper technical details
Efficient modular design
· Low number of assembly parts enables
quick development of customised
solutions
· Engineered for efficient and high
precision manufacturing
· Wide range of applications
Wide operating scope
· High coefficient γ of Lama damper
assures efficient damping at any
closing speed
· Damping force can be easily adapted
to customer needs
Damping
force
FH
γ=
FH
FL
FH – damping force at slam speed (12mm/s)
FL – damping force at slow speed (1mm/s)
FL
Stroke
γ
7
6
Lama damper
Industry range
3
Higher coefficient γ means reliable
damping at high speed and ensures
that the system will reach its final
position even at very slow speed
Reliability
18%
7%
Nominal value
-7%
FH
FL
Lama damper
Industry average
FH -damping force at slam speed (12 mm/s)
-18%
· Full control over all phases of
manufacturing process
· Automated 100% quality check
· Automated assembly technology
minimises the risk of variations in
performance
· Sealing process assures
prevention of oil leakage
Standard deviation measured
on the sample of 1000 pcs.
2.10
03_glissando_soft_closing_R_CS2.2.10 2.10
8/25/10 12:39:53 PM
Soft-closing systems
for doors and drawers
Glissando TL Glissando MS
Glissando BS Glissando PD
Glissando 170
Glissando FF
Quality
· Lama damper assures efficient
and reliable damping
· Automated 100% quality
check
Glissando for drawers
Superior soft closing
action
· Furniture doors close safely,
silently and softly
· Consistent performance on all
weights and sizes of furniture
doors
· Reliable damping at any
closing speed
2.11
03_glissando_soft_closing_R_CS2.2.11 2.11
8/25/10 12:39:54 PM
Soft-closing systems
Glissando
Soft-closing
systems
'One for all' Glissando TL
· One item fits multiple furniture
door applications
· Tool-less mounting
· Just one Glissando per two or
three hinges ensures maximum
efficiency
Adjustability of damping
force
Easy mounting and easy
add-on
· Achieved simply by rotating the
adjuster
· Enables perfect functioning
across a broad range of door
weights
· No changes to standard drilling
patterns
· The possibility of fitting at any
stage of furniture assembly
· Snap-on feature of Glissando TL
2.12
03_glissando_soft_closing_R_CS2.2.12 2.12
8/25/10 12:40:04 PM
Glissando
Hinge attached
soft-closing system
For 110° and 125° hinges
110°, 125°
Interaxis
Interaxis
45mm
48mm
48
18.5
Glissando TL
· ST plus 110, 125
· ST 110
· Basic 110
110°
951.0Z90.050
toolless
125°
951.0X05.050
Ø 35
Item number
is available upon request
67
70
toolless
Ø 35
Item number
Glissando TL for extra light or extra heavy doors
32
100 Pcs
Cup type
Hinge opening
angle
Technical
details
6
9.5
45
Made of steel and plastic
110°
951.0V94.650
125°
951.0V99.650
951.0V93.650
18,5
Glissando BS
· ST plus 110,125
· ST 110
· Basic 110
100 Pcs
67
75
32
Made of zinc and plastic
Legend of hinge cup symbols
Screw-on
ready
Machine
insertion
ready
Pre-mounted
euro screws
Pre-mounted
chipboard
screws
2.13
03_glissando_soft_closing_R_CS2.2.13 2.13
8/25/10 12:40:14 PM
Adjustable damping zone and force
Soft-closing systems
· Same item can be used on all crankings and
angled hinges
· Designed to fit the concealed hinge cup and
requires no extra space inside the cabinet
· Adjustable damping force
· Screw-on or toolless mounting
Turn towards ‘+’ to increase and ‘-’ to
decrease the damping force
Mounting
details
Toolless assembly
Insert Glissando TL into
the holes on the hinge
Press down
Glissando BS system is
mounted on the hinge cup by
using cup fixing screws. The
fixing screws must be at least
15mm long.
Glissando
cm
250
5
200
4
150
3
100
50
No additional drilling is required
2
2
3
4
5
N
Recommended number per door and positioning
2.14
03_glissando_soft_closing_R_CS2.2.14 2.14
8/25/10 12:40:28 PM
Glissando
Stand-alone door
soft-closing system
For 170° hinges, face-frame
applications and universal
stand–alone solution
Technical
details
Glissando 170
· ST 170
· Basic 170
Item number
21.3
951.0Z50.650
94
84
18.3
100 Pcs
Made of zinc and plastic
Glissando FF
· face frame
applications
21.3
951.0Z44.650
94
84
15.3
100 Pcs
Made of zinc and plastic
Glissando MS
· universal
21.3
951.0Z88.650
94
84
18.3
100 Pcs
Made of zinc and plastic
2.15
03_glissando_soft_closing_R_CS2.2.15 2.15
8/25/10 12:40:33 PM
Soft and gentle door closing
Stand alone damper
Place and fix mounting
Multiple applications
Optimal closing speed of any door
dimension or weight
· Discreet design
Adjustable damping zone and force
Soft-closing systems
·
·
·
·
·
Turn towards ‘+’ to increase and ‘-’ to
decrease the damping force
Mounting
details
min 1 mm
Glissando 170 is mounted on the cabinet
side by using chipboard screws at least
15mm long
For perfect door closing it is necessary to
make 1mm gap between door and side
panel through hinge depth adjustment.
Glissando FF is mounted on the cabinet
frame by using chipboard screws at
least 15mm long
min 1 mm
Glissando MS is mounted on the cabinet
side by using chipboard screws at least
15mm long
For perfect door closing it is necessary to
make 1mm gap between door and side
panel through hinge depth adjustment.
Glissando
cm
250
5
200
4
150
3
100
50
2
2
3
4
5
N
Recommended number per door and positioning
2.16
03_glissando_soft_closing_R_CS2.2.16 2.16
8/25/10 12:40:44 PM
Glissando PD
Piston Dampers
Damper
“PLUS”
Item number
240.7078.
>
Grey
Mounting
details
White
· Damper can be fitted into a drilling on cabinet panel
(top, bottom or side panel)
· Can be mounted using a mounting plate
350 380
height
(cm)
250
Door width: 40 cm
200
4
150
3
100
50
2
Mounting
distance 220-280 260-320 300-360
(mm)
1000 Pcs
S
Housing made of plastic
Mounting distance and drilling information:
m
52 m
.
S
min
Ø10 +0.2
Mounting distance information is
calculated for 16mm thick doors
with hinges of following types:
·
·
·
·
ST free
ST plus 110
ST 110
Basic 110
A trial mounting is
always recommended.
Please contact
Titus+Lama+Huwil
or your distributor
for further technical
assistance.
Soft closing devices
cannot be used with
free-swinging door
hinges without a selfclosing mechanism
> see page 3.18 for details
2.17
03_glissando_soft_closing_R_CS2.2.17 2.17
8/25/10 12:40:47 PM
Glissando PD
Mounting plates
12
Single
Item number
Grey
Drilling pattern
White
Technical
details
Mounting
plate type
Soft-closing systems
· Available for euro screw or chipboard screw fixing
· Compatible with 32mm module
· For twin door cabinets use double mounting plate
240.7080.
>
350 380
240.7079.
>
350 380
240.7081.
>
380
46
12.5
52
37
32
19
1000 Pcs
Made of plastic
12
Double
52
32
14
46
37
19
1000 Pcs
Made of plastic
2.18
03_glissando_soft_closing_R_CS2.2.18 2.18
8/25/10 12:40:50 PM
Glissando for drawers
Titusoft damped
self-closing system
Item number
Black
For wooden
drawers
Panel
thickness
For drawers
12/13
09891
>
835
15/16
09892
>
835
One set consists of:
· 1 left damped self-close mechanism
· 1 right damped self-close mechanism
· 2 actuator pins
· 4 pcs 6mm euroscrews
actuator pin
100 Sets
euroscrew
Made of plastic
For metal
drawers
09890
>
835
One set consists of:
· 1 left damped self-close mechanism
· 1 right damped self-close mechanism
· 2 L’turn actuator pins
· 4 pcs 6mm euroscrews
actuator pin
100 Sets
euroscrew
Made of plastic
2.19
03_glissando_soft_closing_R_CS2.2.19 2.19
8/25/10 12:40:52 PM
Metal drawer
Soft-closing systems
· Self-closing and soft-closing in a single mechanism
· Easy add-on to existing drawer slides
· The mechanism is mounted on the cabinet side,
between the cabinet and drawer side
· An activator pin, mounted on the drawer side,
activates the mechanism
· Compatible with a wide range of roller runners and
is independent of drawer runner manufacturer
Wooden drawer
Technical
details
12.5 ±0.5
Ø5 x thru
43
Ø5 x 15
60
32
128
15.5 ±0.5
43
A x thru
36
64
128
ØA x thru
A = 6mm square hole punch
Drilling template
For more information ask your representative
0.8
0.7
Drawer closing speed (m/s)
Drawer weight refers to the weight of the
contents of the drawer and excludes the weight
of the drawer itself. Figures were achieved using
a drawer weighing 5 kg.
0.6
0.5
0.4
0.3
Soft closure
0.2
>
0.1
0
0
5
10
15
20
25
30
35
Total drawer weight (kg)
2.20
03_glissando_soft_closing_R_CS2.2.20 2.20
8/25/10 4:46:59 PM
04a_lama_spone_info_Ang_R_CS2.in3.1 3.1
8/25/10 12:32:55 PM
Concealed
hinges
04a_lama_spone_info_Ang_R_CS2.in3.2 3.2
8/25/10 12:32:55 PM
Concealed hinges
Product guide
ST plus series
ST plus 110
cam-adjustable door depth, ST assembly, Ø 35mm cup drilling
Cranking
Opening angle
Cup type
Page
0mm
110°
for wooden door
3.21
9mm
ST plus 110 Touch opening
0mm
3.21
110°
for wooden door
9mm
ST plus 125
0mm
3.23
125°
ST series
ST 110
3.23
for wooden door
3.25
ST assembly, Ø 35mm cup drilling
Angle and
cranking
Opening angle
Cup type
Page
0mm
110°
for wooden door
3.27
9mm
3.27
15mm
3.27
ST 110/-15°
-15°, 0mm
110°
for wooden door
3.29
ST 110/15°
15°, 0mm
110°
for wooden door
3.31
ST 110/24°
24°, 9mm
110°
for wooden door
3.33
ST 110/30°
30°, 9mm
110°
for wooden door
3.35
ST 110/45°
45°, 9mm
110°
for wooden door
3.37
45°, 18mm
ST 110/90°
ST 110
3.39
90°, 18mm
110°
for wooden door
3.41
0mm
110°
for aluminium
3.43
frame door
ST 170
0mm
135°-165°
3.45
9mm
165°
3.45
0mm
9mm
ST mounting plates
3.45
165°
ST for pie-cut corner cabinet
ST free 110
for wooden door
0mm
110°
for wooden door
3.47
for wooden door
3.49
3.49
3.51
3.3
04a_lama_spone_info_Ang_R_CS2.in3.3 3.3
8/25/10 12:34:18 PM
slide-on assembly, Ø 35mm cup drilling
Angle and
cranking
Opening angle
Cup type
Page
0mm
110°
for wooden door
3.57
Basic 110
9mm
3.57
15mm
3.57
Basic 110/30°
30°, 9mm
110°
for wooden door
3.59
Basic 110/45°
45°, 9mm
110°
for wooden door
3.61
3.63
45°, 18mm
Basic 110/90°
90°, 0mm
110°
90°, 18mm
110°
0mm
110°
Basic 110
Concealed hinges
Basic series
for wooden door
3.65
3.65
for aluminium
3.67
frame door
Basic 170
0mm
165°
0mm
135°- 165°
3.69
9mm
165°
3.69
Basic for pie-cut corner cabinet
Basic flap door hinge
0mm
90°
for wooden door
for wooden door
3.71
for wooden door
3.73
Basic mounting plates
3.75
Miniprimat series
Miniprimat 95
3.69
key-hole assembly, Ø 26mm cup drilling
Angle and
cranking
Opening angle
Cup type
Page
0mm
95°
for wooden door
3.81
9mm
3.81
15mm
3.83
18mm
3.83
Miniprimat 95/45°
45°, 18mm
95°
for wooden door
3.85
Miniprimat 95/90°
90°, 0mm
95°
for wooden door
3.87
3.87
90°, 18mm
Miniprimat 95
Miniprimat mounting plates
0mm
95°
9mm
95°
for glass door
3.89
3.89
15mm
3.91
18mm
3.91
3.93
3.4
04a_lama_spone_info_Ang_R_CS2.in3.4 3.4
8/25/10 12:34:18 PM
Special hinges
key-hole assembly
Opening angle
Cup type
Page
Wide angle hinge and mounting plate
270°
3.97
Hinge for elements with refrigerator
110°
3.99
Accessories
Page
Cover caps
3.101
3.5
04a_lama_spone_info_Ang_R_CS2.in3.5 3.5
8/25/10 12:34:18 PM
Concealed hinges
3.6
04a_lama_spone_info_Ang_R_CS2.in3.6 3.6
8/25/10 12:34:19 PM
Concealed hinges
Information
Concealed hinge parts
10
9
8
11
2
3
5
7
6
12
4
1
7
Note: The drawing shows
the ST plus hinge on a camadjustable mounting plate
1
Hinge cup
7
Holes for fixing screws
2
Hinge arm
8
Side adjustment screw
3
Closing mechanism
9
Height cam adjuster
4
Inner link
10
Depth cam adjuster
5
Outer link
11
ST time-saving mounting system
6
Axis
12
Mounting plate
3.7
04a_lama_spone_info_Ang_R_CS2.in3.7 3.7
8/25/10 12:34:19 PM
Concealed hinges
How to achieve the desired door overlay?
By choosing the hinge of
appropriate cranking
Concealed hinges with specific hinge
arms are available for different door
overlays. The most common overlays
are:
1.
2.
Full overlay. Use a hinge with
0mm cranking.
By choosing the mounting
plates of appropriate
thickness
Cabinet side
Door
Half overlay for double doors.
Use a hinge with 9mm cranking.
3.
Inset door. Use a hinge with
15mm, 16mm or 18mm cranking.
thickness (D) must be chosen from the
enclosed table.
To achieve the desired overlay (x) while
using a determined drilling distance (K),
a mounting plate of appropriate
%
X
3
K
Door clearance and gap
V
;
,
'
6
3
2
1
3
M2
S
A
7
P
3
L
E8
9
0
1
0
2
1
0 D
and the type of hinge. The minimum
clearance scale can be found in the
catalogue. When using on double
doors with one party-wall the door
clearance must be twice as large
(F>2Fmin).
The door clearance (F>Fmin) and gap
(Z) represent the minimal necessary
space needed for the correct opening
and closing of the door. The minimal
required values depend on the cup
drilling distance (K), door thickness (V)
7
5
4
5
Y
,
4
K
16
17
3
0.3 0.5
4
0.3 0.7
5
1.0 1.3
S
21
E 22
L
0.7 1.0 1.3 1.7 3.5
P
0.3 M
0.5 0.7 3.0 3.1
A
1.7 3.5 3.0 3.1 3.0
18
19
20
FMIN
Gap Z=0
3.8
04a_lama_spone_info_Ang_R_CS2.in3.8 3.8
8/25/10 12:34:19 PM
Concealed hinges
Information
How to mount the hinge on the door?
The choice of hinge cup type depends
on the material of which the door
is made and the chosen assembly
method. The hinge can be assembled
on a wooden door by fixing it with
chipboard screws or euro screws,
inserted by machine or tool free by
using the patented Free system.
Free
Tool free mounting system
At first the wings have to be fully
opened with the hinge in the closed
door position. The hinge must be
inserted, correctly and fully, in an
adequately drilled hole. The wing
marked with the number 1 must be
closed first, followed by the second
one. To close properly the wing
must click. For disassembly, use the
same procedure in reverse. For the
deblocking of the first wing, use a thin
screwdriver or a coin.
Easy-Fix
Time saving system
After inserting the hinge correctly and
fully, the cup is fixed by rotating the
two screws clockwise (by 90°) with a
PZ2 screwdriver.
90º
Screw fixing hinge cup
The hinge is fixed on the door with two
prescribed screws.
3.9
04a_lama_spone_info_Ang_R_CS2.in3.9 3.9
8/25/10 12:34:20 PM
Concealed hinges
Drilling patterns for hinge cups
shown on the next page or on
specific product pages for nonstandard drillings.
Machine insertion
ready hinge cup
Special dowels for machine insertion
are pre-mounted. Two versions are
available for 10mm or 8mm holes.
Hinge cup with
pre-mounted euro
screws
The hinge is fixed on the door with two
pre-mounted euro screws for 5mm
holes. Where not specified otherwise,
euro screws are 13mm long.
Hinge cup with
pre-mounted chipboard
screws
The hinge is fixed on the door with two
pre-mounted chipboard screws.
Glass door hinge cup
The hinge is fixed into one single hole
on the glass door. Glass thickness
must be between 4mm and 6mm.
Aluminium frame
screw-on hinge cup
The hinge is fixed onto a specific
drilling on the aluminium frame with
two screws.
3.10
04a_lama_spone_info_Ang_R_CS2.in3.10 3.10
8/25/10 12:34:24 PM
Concealed hinges
Information
Drilling patterns for hinge cup
Interaxis
Interaxis
Interaxis
45mm
48mm
38mm
45
Interaxis
45mm and 48mm
Ø 35
Ø 26
Drilling
pattern
Drilling
pattern
Premounted
chipboard
screws
9.5
38
26
48
35
Screw-on ready
7.5
6
8
· Miniprimat series
6
Ø 35
Drilling
pattern
45
Interaxis 38mm
38
10
ST free series
ST plus series
ST series
Basic series
Type of
hinge cup
35
·
·
·
·
48
9.5
Other drilling patterns can be found on
specific product pages.
7.5
Interaxis is the distance between two
holes for fixing screws on the hinge
cup.
/8
Interaxis 42mm and 52mm are
optionally available with some versions,
on special request.
38
26
48
35
45
Easy-fix system
9.5
5
* Available upon special request
7.5
6
5
Interaxis 42mm, 52mm*
35
10
Machine
insertion ready
5
> see page 0.3
Premounted
Euro screws
9.5
6
38
26
48
35
45
35
Free system
7.5
3.11
04a_lama_spone_info_Ang_R_CS2.in3.11 3.11
8/25/10 12:34:25 PM
Check the mounting plate
drilling distance!
Concealed hinges
When fixing the mounting plate please
check the drilling distance from side
border. It may differ depending on
mounting situation and mounting plate
type. Some mounting plates can be
used for both 28 or 37mm drilling
distance simply by rotating.
How to fix the mounting plate on the cabinet side?
The mounting plates can be fixed on
cabinet side with various methods.
Euro screws are most suitable for
standard 32mm drillings. Mounting
plates with pre-mounted chipboard
Euro screws ready
mounting plate
The mounting plate is fixed with two
standard 6.3mm euro screws.
Mounting plate with premounted euro screws
Euro screws for 5mm holes are
pre-mounted on the mounting plate.
Different screw lengths available.
Machine insertion ready
mounting plate
Dowels for machine insertion in
10mm holes are pre-mounted on the
mounting plate.
Mounting plate with
pre-mounted expanding
dowels
Expanding dowels for 5mm holes are
pre-mounted on the mounting plate.
Two lengths available: 7.5mm and
10.5mm.
Chipboard screws ready
mounting plate
The mounting plate is fixed with two
prescribed chipboard screws or
equivalent.
Mounting plate with
pre-mounted chipboard
screws
The mounting plate is fixed with two
pre-mounted chipboard screws.
screws, spreading dowels or 10mm
dowels for machine insertion, are also
available.
3.12
04a_lama_spone_info_Ang_R_CS2.in3.12 3.12
8/25/10 4:54:20 PM
Concealed hinges
Information
How to assemble the hinge and the mounting plate?
ST time saving system
· ST free series
· ST plus series
· ST series
The door is assembled on the cabinet
side simply by fixing the two hooks
under the hinge arm on the outer part of
the mounting plate and pressing gently
on the rear part of the hinge arm.
For disassembly press the button on
the rear of the hinge arm.
The hinge is assembled by sliding the
hinge arm over the mounting plate.
The lower part of the horizontal setup screw must fit correctly into the
groove on the mounting plate. After
adjusting the door depth, the mounting
procedure is finished by tightening the
fixing screw.
The hinge is assembled on the
mounting plate by inserting the fixing
screw on the appropriate hole on the
hinge arm. After adjusting the door
depth, the mounting procedure is
finished by tightening the fixing screw.
assembly:
disassembly:
Slide-on system
· Basic series
Key-hole system
· Miniprimat series
· Special hinges
3.13
04a_lama_spone_info_Ang_R_CS2.in3.13 3.13
8/25/10 12:34:29 PM
Concealed hinges
For the furniture user’s safety
please use the appropriate
number of hinges so that the
door height or weight does
not exceed that shown below.
How many hinges per door?
Check the enclosed specifications for
the number of required hinges per door
by considering both door height and
weight. In case of doubt please contact
Lama or your local distributor.
Concealed hinges with Ø
35mm hinge cup diameter
·
·
·
·
·
ST free series
ST plus series
ST series
Basic series
Special hinges
height
(cm)
250
3
100
weight
(kg)
· Miniprimat series
4
150
50
Concealed hinges with Ø
26mm hinge cup diameter
5
200
2
4-7
8-12 13-16 17-22
height
(cm)
250
5
200
4
150
3
100
50
2
weight
(kg)
2-4
4-6
6-8
8-10
3.14
04a_lama_spone_info_Ang_R_CS2.in3.14 3.14
8/25/10 12:34:34 PM
Concealed hinges
Information
Adjustment range can be
found on the product pages.
Side adjustment
The side adjustment is indispensable
to align the door with the side of the
cabinet thus allowing perfect lifetime
opening and closing of the door.
By rotating the appropriate
screw
·
·
·
·
The side adjustment is made by
rotating the appropriate screw on the
hinge arm.
ST free series
ST plus series
ST series
Basic series
Adjustment
range
By temporarily releasing the
fixing screw
· Miniprimat series
· Wide angle hinge
For the side adjustment:
1. Release the fixing screw
2. Make the necessary adjustment by
rotating the appropriate screw
3. Tighten the fixing screw
Without releasing the fixing screw no
side adjustment is possible.
Adjustment
range
3.15
04a_lama_spone_info_Ang_R_CS2.in3.15 3.15
8/25/10 12:34:34 PM
Concealed hinges
Height adjustment
Height adjustment is necessary to
achieve perfect vertical door position
that emphasises the accuracy of
manufacture.
By rotating the cam adjuster
· ST free, ST plus and ST series with
The height adjustment is made by
rotating the cam adjuster on the
mounting plate.
+2
-2
cam adjustable mounting plate
Manual adjustment by
releasing the adjustment
screw
For height adjustment the adjustment
screw has to be temporarily released
during manual adjustment.
-2
· ST free, ST plus and ST series with
+2
horizontal mounting plate
-2
· ST free, ST plus and ST series
without cam-adjustable cruciform
mounting plates
· Basic series
· Miniprimat series
· Wide angle hinge
For height adjustment the two
mounting plate fixing screws have to
be temporarily released while making
the manual adjustment.
+2
By releasing the fixing
screws of mounting plate
3.16
04a_lama_spone_info_Ang_R_CS2.in3.16 3.16
8/25/10 12:34:35 PM
Concealed hinges
Information
Adjustment range can be
found on the product pages.
Depth adjustment
The system enables easy adjustment
of the door depth to assure that the
door fits well on the side of the cabinet.
By rotating the cam adjuster
The adjustment is made by rotating the
cam adjuster on the hinge arm.
· ST free series
· ST plus series
+/-1.5
By releasing the fixing or
adjustment screw
· ST series
· Basic series
· Miniprimat
The depth adjustment is made by
temporarily releasing the adjustment
screw (ST series) or fixing screw (Basic
series). After the adjustment is made
the screw has to be re-tightened.
Adjustment
range
3.17
04a_lama_spone_info_Ang_R_CS2.in3.17 3.17
8/25/10 12:34:37 PM
Soft closing devices can not
be used with free-swinging
door hinges.
Lama
recommends!
Concealed hinges
Most of Lama hinges can be combined
with soft closing devices giving silent
closing motion.
>see pages 2.13-2.16 for details
Door closing systems
There are three types of door closing
systems:
Concealed hinges with
limited self-closing angle
- ST free series
- ST plus series
- ST series
- Basic series
Two-positions self-closing
concealed hinges
- Miniprimat series
Free-swinging door hinges *
- all series
self - closing
free - swinging
The self-closing angle is the point
from which the door will close by
itself, without user assistance. The
mechanism starts closing the door
from a 14° to 20° angle, depending on
the concealed hinge type. From that
point to the maximum opening angle
the door remains in an open position.
The door can only be in two
positions: closed or fully opened. The
closing mechanism does not allow
intermediate open door positions
unless the door is held.
Optionally most of Lama concealed
hinges can be supplied without selfclosing mechanism. These hinges are
not presented in this catalogue but
may be ordered upon request. Please
contact Lama or your distributor for
item order numbers and technical
assistance.
* Available upon special request
> see page 0.3
3.18
04a_lama_spone_info_Ang_R_CS2.in3.18 3.18
8/25/10 12:34:38 PM
Perfect solution for
quality furniture
Simple and quick mounting
with ST time saving system
Flexibility for the furniture
user
ST system allows for repeated
assembly and disassembly of the
furniture door. Just a simple press on
the button on the rear of the hinge
arm is needed for disassembly.
Simple, quick
and efficient
Independent three-way
adjustment
ST free system
· Combine the ST plus hinge with a
cam adjustable mounting plate for
the advantage of an independent
three-way adjustment!
04b_lama_spone_st_free_R_CS2.ind3.19 3.19
8/25/10 12:19:11 PM
Series
ST plus
ST
ST free
Easy assembly and
disassembly
Precise and longlasting
· For easy, quick assembly and
disassembly of furniture doors
· Proven fixing mechanism
· Precise door alignment and
perfect gap adjustment
· Furniture door alignment is
precise and long-lasting. The
door can be removed and
assembled several times
without changing.
For every purpose
Touch opening
· Full range of opening angles
· Applications for multiple
materials
· Complete family of hinge cup
and mounting plate: tool free
mounting, easy-fix system
and pre-mounted screws
or dowels
· Corner cabinet hinge available
· Guarantees effortless
opening
· Elegant cabinet design
· Doors without handles
3.20
04b_lama_spone_st_free_R_CS2.ind3.20 3.20
8/25/10 12:19:22 PM
ST plus 110
For wooden doors
110°
Interaxis
Interaxis
45mm
48mm
48
Ø 35
6
9.5
45
Ø 35
Item
number
Item
number
Cranking
248.0T10.050
248.0T70.050
0mm
248.0T13.050
248.0T71.050
248.0T69.050
248.0T72.050
Cup type
Drilling patterns for hinge cups > see page 3.11
200 Pcs
Made of steel
Cranking
248.0V69.050
248.0V71.050
9mm
248.0V70.050
248.0V72.050
248.0V56.050
Drilling patterns for hinge cups > see page 3.11
200 Pcs
Made of steel
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screws
Machine
insertion
ready
Easy-fix
system
3.21
04b_lama_spone_st_free_R_CS2.ind3.21 3.21
8/25/10 12:19:24 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
110˚
35mm
11.5mm
ST
· Quick, comfortable and precise depth adjustment
Depth
adjustment
+1.5/-1.5mm
Height
adjustment
+2/-2mm
Side
adjustment
+3/-1mm
Concealed hinges
For further explanation > see pages 3.15 - 3.17
Mounting
details
Mounting plate thickness table
For further explanation > see page 3.8
Mounting plate
drilling distance
x
17.8
S
13
14
15
16
17
18
3
2
1
0
3
2
1
0
3
2
1
0
8
9
D
3
4
5
z
K
37
63
K
x
D
37
F>Fmin
V
7
Drawings show
application on D=0mm
thick mounting plate
26.7
x
D
S
5
6
7
3
2
1
0
3
2
1
0
3
2
1
37
63
3
4
4
K
z
K
37
5
F>2Fmin
0
D
x
16
V
Drawings show
application on D=0mm
thick mounting plate
Mounting plates
Soft-closing systems
Steel mounting plates
> see page 3.51
Glissando TL
> see page 2.13
Zinc diecast mounting
plates
> see page 3.51
Glissando PD
> see page 2.17
Steel mounting plates with
cam adjustable height
> see page 3.51
Face frame adapters
> see page 3.53
Door clearance
For further explanation > see page 3.8
V
K
16
17
18
19
20
21
22
3
0.3 0.5 0.7 1.0 1.3 1.7 2.5
4
0.3 0.5 0.7 0.9 1.2 1.6 2.1
5
0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Accessories
Cover caps for hinge
arm with Glissando
> see page 3.101
Gap ZMIN=0
3.22
04b_lama_spone_st_free_R_CS2.ind3.22 3.22
8/25/10 12:19:30 PM
ST plus 110
Touch opening
For wooden doors without handles
Touch
110°
Interaxis
Interaxis
45mm
48mm
48
Cup type
Cranking
6
9.5
45
Ø 35
Ø 35
Item
number
Item
number
915.0Z85.050
Item
number
915.0Z96.050
0mm
200 Sets
Made of steel
915.0007.050
Cranking
9mm
200 Pcs
Made of steel
Catches
Catch
with base plate
Catch
Knock-in pad
100 Pcs
Self adhesive pad
Catch
915.7102.380
Catch with base plate
915.7110.380
Knock-in pad
915.7109.050
Self adhesive pad
915.7105.050
Made of plastic
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screws
3.23
04b_lama_spone_st_free_R_CS2.ind3.23 3.23
8/25/10 12:19:46 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
110˚
35mm
11.5mm
ST
· Hinge integrated self-opening mechanism
· Effortless opening with just a light touch
Depth
adjustment
+1.5/-1.5mm
Height
adjustment
+2/-2mm
Side
adjustment
+3/-1mm
Concealed hinges
For further explanation > see pages 3.15 - 3.17
Mounting
details
Mounting plate
thickness table
Mounting plate
drilling distance
17.8
S
x
D
63
3
z
K
37
K
14
15
16
3
2
1
0
3
2
1
0
3
2
1
0
8
9
4
5
37
F>Fmin
13
17
18
D
x
V
7
Drawings show
application on D=0mm
thick mounting plate
26.7
x
D
S
63
3
5
6
7
3
2
1
0
3
2
1
0
3
2
1
4
z
37
K
4
5
K
F>2Fmin
37
0
D
20
21
x
V
16
Drawings show
application on D=0mm
thick mounting plate
Ø10
50
pre-drilled hole
Ø2 / 10 mm
9.5
12
19
Catch
Catch with base plate
Mounting plates
Fixing of pad
depends on the catch position
Door clearance
For further explanation > see page 3.8
Accessories
Steel mounting plates
> see page 3.51
Zinc diecast mounting
plates
> see page 3.51
Steel mounting plates with
cam adjustable height
> see page 3.51
Cover caps for hinge
arm with Glissando
> see page 3.101
V
K
16
17
18
19
22
3
0.3 0.5 0.7 1.0 1.3 1.7 2.5
4
0.3 0.5 0.7 0.9 1.2 1.6 2.1
5
0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Gap ZMIN=0
3.24
04b_lama_spone_st_free_R_CS2.ind3.24 3.24
8/25/10 12:20:11 PM
ST plus 125
For wooden doors
125°
Interaxis
Interaxis
45mm
48mm
48
Ø 35
6
9.5
45
Ø 35
Item
number
Item
number
Cranking
248.0U85.050
248.0V08.050
0mm
248.0U84.050
248.0V09.050
248.0U86.050
248.0V10.050
Cup type
Drilling patterns for hinge cups > see page 3.11
200 Pcs
Made of steel
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screws
Machine
insertion
ready
Easy-fix
system
3.25
04b_lama_spone_st_free_R_CS2.ind3.25 3.25
8/25/10 12:20:19 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
125˚
35mm
12.5mm
ST
· Enables better accessibility due to the wider opening
angle
· Quick, comfortable and precise depth adjustment
Depth
adjustment
+1.5/-1.5mm
Height
adjustment
+2/-2mm
Side
adjustment
+3/-1mm
Concealed hinges
For further explanation > see pages 3.15 - 3.17
Mounting
details
Mounting plate thickness table
For further explanation > see page 3.8
Mounting plate
drilling distance
x
18.5
S
13
14
15
16
17
18
19
3
2
1
0
3
2
1
0
3
2
1
0
3
2
1
0
D
r
1
3
4
5
6
g
0.4 1.2 1.7 2.1 2.5
D
3
4
37
63
K
V
K
5
z>zmin
F>Fmin
6
37
4
Drawings show
application on D=0mm
thick mounting plate
27.5
S
D
z
V
K
37
63
ZMIN = (K-2) x 0.7 + (V-16) x 0.5 -g
F>2Fmin
x
17
Drawings show
application on D=9mm
thick mounting plate
Mounting plates
Soft-closing systems
Steel mounting plates
> see page 3.51
Glissando TL
> see page 2.13
Zinc diecast mounting
plates
> see page 3.51
Glissando PD
> see page 2.17
Steel mounting plates with
cam adjustable height
> see page 3.51
Face frame adapters
> see page 3.53
Door clearance
For further explanation > see page 3.8
V
K
16
17
18
19
20
21
22
23
24
3
0.5 1.5 1.9 2.4 2.9 3.4 4.1 4.8 5.6
4
1.2 1.5 1.8 2.2 2.7 3.3 3.8 4.5 5.2
5
1.1 1.4 1.8 2.2 2.6 3.1 3.6 4.3 4.9
6
1.1 1.4 1.7 2.1 2.5 2.9 3.5 4.0 4.7 FMIN
Accessories
Cover caps for hinge
arm with Glissando
> see page 3.101
3.26
04b_lama_spone_st_free_R_CS2.ind3.26 3.26
8/25/10 12:20:22 PM
ST 110
For wooden doors
110°
Interaxis
Interaxis
45mm
48mm
48
Ø 35
6
9.5
45
Ø 35
Item
number
Item
number
Cranking
248.0535.050
248.0532.050
0mm
248.0171.050
248.0172.050
248.0186.050
248.0188.050
Cup type
Drilling patterns for hinge cups > see page 3.11
200 Pcs
Made of steel
Cranking
248.0536.050
248.0533.050
9mm
248.0279.050
248.0327.050
248.0482.050
248.0545.050
Drilling patterns for hinge cups > see page 3.11
200 Pcs
Made of steel
Cranking
248.0537.050
248.0534.050
15mm
248.0280.050
248.0328.050
248.0487.050
248.0547.050
Drilling patterns for hinge cups > see page 3.11
200 Pcs
Made of steel
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screws
Machine
insertion
ready
Easy-fix
system
3.27
04b_lama_spone_st_free_R_CS2.ind3.27 3.27
8/25/10 12:20:31 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
110˚
35mm
11.5mm
ST
Depth
adjustment
+5/-1.5mm
Height
adjustment
+2/-2mm
Side
adjustment
+3/-1mm
For further explanation > see pages 3.15 - 3.17
Concealed hinges
· Quick and practical assembly on the hinge and
mounting plate by pressing gently on the rear part
of the hinge arm
· One button disassembly
Mounting
details
Mounting plate thickness table
For further explanation > see page 3.8
Mounting plate
drilling distance
17.8
S
x
D
63
3
V
7
15
16
3
2
1
0
3
2
1
0
3
2
1
0
8
9
5
37
F>Fmin
x
14
4
z
K
37
K
13
17
18
D
Drawings show
application on D=0mm
thick mounting plate
26.7
x
D
S
63
3
5
6
7
3
2
1
0
3
2
1
0
3
2
1
0
4
z
37
K
4
K
5
F>2Fmin
D
37
x
16
Drawings show
application on D=0mm
thick mounting plate
V
S
V
35.7
16
17
18
19
20
21
3
2
2
2
3
3
3
4
3
3
3
5
3
D
K
37
63
K
F>Fmin
25
D
37+V
Drawings show
application on D=3mm
thick mounting plate
Mounting plates
Soft-closing systems
Steel mounting plates
> see page 3.51
Glissando TL
> see page 2.13
Zinc diecast mounting
plates
> see page 3.51
Glissando PD
> see page 2.17
Steel mounting plates with
cam adjustable height
> see page 3.51
Face frame adapters
> see page 3.53
Door clearance
For further explanation > see page 3.8
V
K
16
17
18
19
20
21
22
3
0.3 0.5 0.7 1.0 1.3 1.7 2.5
4
0.3 0.5 0.7 0.9 1.2 1.6 2.1
5
0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Accessories
Cover caps for hinge
arm with Glissando
> see page 3.101
Gap ZMIN=0
3.28
04b_lama_spone_st_free_R_CS2.ind3.28 3.28
8/25/10 12:20:38 PM
ST 110/-15°
-15° angled application for wooden doors
110°
Interaxis
Interaxis
45mm
48mm
48
Ø 35
6
9.5
45
Ø 35
Item
number
Item
number
Cranking
248.0V14.050
248.0V39.050
0 mm
248.0V41.050
248.0V42.050
Cup type
Drilling patterns for hinge cups > see page 3.11
100 Pcs
Cup made of steel, arm made of zinc
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screws
Machine
insertion
ready
Easy-fix
system
3.29
04b_lama_spone_st_free_R_CS2.ind3.29 3.29
8/25/10 12:20:48 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
110˚
35mm
11.5mm
ST
Depth
adjustment
+5/-1.5mm
Height
adjustment
+2/-2mm
Side
adjustment
+3/-1mm
Concealed hinges
For further explanation > see pages 3.15 - 3.17
Mounting
details
Mounting plate thickness table
For further explanation > see page 3.8
Mounting plate
drilling distance
x
4
5
6
10
11
12
13
14
3
2
1
0
3
2
1
0
3
2
1
15
18
D
S
3
4
9
43
69
K
9
15°
10
K
5
x
9
0
D
43
V
Drawings show
application on D=0mm
thick mounting plate
Soft-closing systems
Mounting plates
Door clearance
For further explanation > see page 3.8
Glissando PD
> see page 2.17
Steel mounting plates
> see page 3.51
''N
JO
Zinc diecast mounting
plates
> see page 3.51
Steel mounting plates with
cam adjustable height
> see page 3.51
Accessories
V
Cover caps for hinge
arm with Glissando
> see page 3.101
K
16
17
18
19
20
21
22
3
0.3 0.5 0.7 1.0 1.3 1.7 2.5
4
0.3 0.5 0.7 0.9 1.2 1.6 2.1
5
0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Gap ZMIN=0
3.30
04b_lama_spone_st_free_R_CS2.ind3.30 3.30
8/25/10 12:20:52 PM
ST 110/15°
15° angled application for wooden doors
110°
Interaxis
Interaxis
45mm
48mm
48
Ø 35
Cup type
Item
number
Cranking
Ø 35
Item
number
248.0V62.050
9mm
100 Pcs
6
9.5
45
Drilling patterns for hinge cups > see page 3.11
Cup made of steel, arm made of zinc
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screws
Machine
insertion
ready
Easy-fix
system
3.31
04b_lama_spone_st_free_R_CS2.ind3.31 3.31
8/25/10 12:20:57 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
110˚
35mm
11.5mm
ST
Depth
adjustment
+5/-1.5mm
Height
adjustment
+2/-2mm
Side
adjustment
+3/-1mm
Concealed hinges
For further explanation > see pages 3.15 - 3.17
Mounting
details
Mounting plate thickness table
For further explanation > see page 3.8
Mounting plate
drilling distance
x,P
29
S
D
3
K
15°
L
61.5
1
2
3
9
4
7
8
9
10
3
2
1
0
3
2
1
0
3
2
1
9
5
9
11
12
0
D
V
K
x
L
P
14.5
Drawings show application on D=0
and K=4mm thick mounting plate
S
15°
D
33
59.5
29
L=37 for thickness D=0
L=36 for thickness D=1
L=36 for thickness D=2
L=35 for thickness D=3
L=33 for thickness D=9
V
K
P
30
14.5
Drawings show application on D=0 and
K=4mm thick mounting plate
Mounting plates
Soft-closing systems
Steel mounting plates
> see page 3.51
Door clearance
For further explanation > see page 3.8
Glissando TL
> see page 2.13
O
J
'N
'
Glissando PD
> see page 2.17
Zinc diecast mounting
plates
> see page 3.51
Steel mounting plates with
cam adjustable height
> see page 3.51
V
16
17
18
19
20
21
22
3
0.3 0.5 0.7 1.0 1.3 1.7 2.5
4
0.3 0.5 0.7 0.9 1.2 1.6 2.1
5
0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Accessories
K
Cover caps for hinge
arm with Glissando
> see page 3.101
Gap ZMIN=0
3.32
04b_lama_spone_st_free_R_CS2.ind3.32 3.32
8/25/10 12:21:06 PM
ST 110/24°
24° angled application for wooden doors
110°
Interaxis
Interaxis
45mm
48mm
48
Ø 35
6
9.5
45
Ø 35
Item
number
Item
number
Cranking
248.0V18.050
248.0V45.050
9mm
248.0V47.050
248.0V48.050
Cup type
Drilling patterns for hinge cups > see page 3.11
100 Pcs
Cup made of steel, arm made of zinc
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screws
Machine
insertion
ready
Easy-fix
system
3.33
04b_lama_spone_st_free_R_CS2.ind3.33 3.33
8/25/10 12:21:15 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
110˚
35mm
11.5mm
ST
Depth
adjustment
+5/-1.5mm
Height
adjustment
+2/-2mm
Side
adjustment
+3/-1mm
Concealed hinges
For further explanation > see pages 3.15 - 3.17
Mounting
details
Mounting plate thickness table
For further explanation > see page 3.8
Mounting plate
drilling distance
x
24.5
S
3
3
37
63.5
K
K
5
9
4
9
10
11
12
3
2
1
0
3
2
1
0
3
2
1
9
5
24°
8
4
13
14
D
9
0
D
37
x
V
Drawings show application
on D=0mm thick mounting
plate
Mounting plates
Soft-closing systems
Steel mounting plates
> see page 3.51
Door clearance
For further explanation > see page 3.8
Glissando TL
> see page 2.13
O
J
'N
'
Glissando PD
> see page 2.17
Zinc diecast mounting
plates
> see page 3.51
Steel mounting plates with
cam adjustable height
> see page 3.51
V
16
17
18
19
20
21
22
3
0.3 0.5 0.7 1.0 1.3 1.7 2.5
4
0.3 0.5 0.7 0.9 1.2 1.6 2.1
5
0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Accessories
K
Cover caps for hinge
arm with Glissando
> see page 3.101
Gap ZMIN=0
3.34
04b_lama_spone_st_free_R_CS2.ind3.34 3.34
8/25/10 12:21:24 PM
ST 110/30°
30° angled application for wooden doors
110°
Interaxis
Interaxis
45mm
48mm
48
Ø 35
6
9.5
45
Ø 35
Item
number
Item
number
Cranking
248.0675.050
248.0665.050
9 mm
248.0N12.050
248.0N13.050
Cup type
Drilling patterns for hinge cups > see page 3.11
200 Pcs
Cup made of steel, arm made of zinc
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screws
Machine
insertion
ready
Easy-fix
system
3.35
04b_lama_spone_st_free_R_CS2.ind3.35 3.35
8/25/10 12:21:33 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
110˚
35mm
11.5mm
ST
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+5/-1.5mm
Concealed hinges
For further explanation > see pages 3.15 - 3.17
Mounting plate
drilling distance
Mounting
details
Mounting plate thickness table
For further explanation > see page 3.8
x
27
2
3
4
9
10
3
2
11
12
13
14
15
S
D
60.5
3
L
K
30°
K
4
9
5
L
0
3
2
9
0
3
2
0
D
x
V
9.5
9
P
Drawings show application on
D=3mm thick mounting plate
L=37 for thickness D=0
L=36 for thickness D=1
L=35 for thickness D=2
L=34 for thickness D=3
L=31 for thickness D=9
P
2.5 3.5 4.5 8.5 9.5 10.5 11.5 12.5 13.5
3
K
9
4
3
9
2
1
0
3
2
1
0
3
2
1
27
S
5
9
0
D
30
56.5
D
30°
30
V
9.5
K
P
Drawings show application on
D=3mm thick mounting plate
Mounting plates
Soft-closing systems
Steel mounting plates
> see page 3.51
Door clearance
For further explanation > see page 3.8
Glissando TL
> see page 2.13
O
J
'N
'
Glissando PD
> see page 2.17
Zinc diecast mounting
plates
> see page 3.51
Steel mounting plates with
cam adjustable height
> see page 3.51
V
16
17
18
19
20
21
22
3
0.3 0.5 0.7 1.0 1.3 1.7 2.5
4
0.3 0.5 0.7 0.9 1.2 1.6 2.1
5
0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Accessories
K
Cover caps for hinge
arm with Glissando
> see page 3.101
Gap ZMIN=0
3.36
04b_lama_spone_st_free_R_CS2.ind3.36 3.36
8/25/10 12:21:41 PM
ST 110/45°
45° angled application for wooden doors
110°
Interaxis
Interaxis
45mm
48mm
48
Ø 35
6
9.5
45
Ø 35
Item
number
Item
number
Cranking
248.0433.050
248.0431.050
9 mm
248.0N16.050
248.0N17.050
Cup type
Drilling patterns for hinge cups > see page 3.11
200 Pcs
Cup made of steel, arm made of zinc
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screws
Machine
insertion
ready
Easy-fix
system
3.37
04b_lama_spone_st_free_R_CS2.ind3.37 3.37
8/25/10 12:21:50 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
110˚
35mm
11.5mm
ST
Depth
adjustment
+5/-1.5mm
Height
adjustment
+2/-2mm
Side
adjustment
+3/-1mm
Concealed hinges
For further explanation > see pages 3.15 - 3.17
Mounting
details
Mounting plate thickness table
For further explanation > see page 3.8
Mounting plate
drilling distance
29
D
x
S
11.5 12.5 13 13.5 14 14.5 15 15.5 16 16.5 17 18
L
59.5
3
K
3
4
2
1
3
0
2
1
0
K
x
°
45
5
L
3
2
1
0
D
V
4.8
P
Drawings show application
on D=3mm thick mounting
plate
L=36 for thickness D=0
L=35 for thickness D=1
L=34 for thickness D=2
L=33 for thickness D=3
P
D
29
3
S
K
9.5 10 10.5 11 11.5 12 12.5 13.5
3
4
2
3
5
23
49.5
9
1
0
2
1
0
3
2
1
0
D
K
°
45
V
4.8
P
Drawings show
application on D=3mm
thick mounting plate
Mounting plates
Soft-closing systems
Steel mounting plates
> see page 3.51
Door clearance
For further explanation > see page 3.8
Glissando TL
> see page 2.13
O
J
'N
'
Glissando PD
> see page 2.17
Zinc diecast mounting
plates
> see page 3.51
Steel mounting plates with
cam adjustable height
> see page 3.51
V
16
17
18
19
20
21
22
3
0.3 0.5 0.7 1.0 1.3 1.7 2.5
4
0.3 0.5 0.7 0.9 1.2 1.6 2.1
5
0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Accessories
K
Cover caps for hinge
arm with Glissando
> see page 3.101
Gap ZMIN=0
3.38
04b_lama_spone_st_free_R_CS2.ind3.38 3.38
8/25/10 12:21:58 PM
ST 110/45°
45° angled application for wooden doors
110°
Interaxis
Interaxis
45mm
48mm
48
Ø 35
6
9.5
45
Ø 35
Item
number
Item
number
Cranking
248.0285.050
248.0283.050
18 mm
248.0N20.050
248.0N21.050
Cup type
Drilling patterns for hinge cups > see page 3.11
100 Pcs
Cup made of steel, arm made of zinc
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screws
Machine
insertion
ready
Easy-fix
system
3.39
04b_lama_spone_st_free_R_CS2.ind3.39 3.39
8/25/10 12:22:07 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
110˚
35mm
11.5mm
ST
Depth
adjustment
+5/-1.5mm
Height
adjustment
+2/-2mm
Side
adjustment
+3/-1mm
Concealed hinges
For further explanation > see pages 3.15 - 3.17
Mounting
details
Mounting plate thickness table
For further explanation > see page 3.8
Mounting plate
drilling distance
D
S
K
3
4
5
D
0
1
2
37
63.5
39
45
K
37
°
V
15
Drawings show
application on D=0mm
thick mounting plate
57
48
º
45
K
48
74.5
D=18
19
19
Drawings show
application on D=18mm
thick mounting plate
Mounting plates
Soft-closing systems
Steel mounting plates
> see page 3.51
Door clearance
For further explanation > see page 3.8
Glissando TL
> see page 2.13
O
J
'N
'
Glissando PD
> see page 2.17
Zinc diecast mounting
plates
> see page 3.51
Steel mounting plates with
cam adjustable height
> see page 3.51
Face frame adapters
> see page 3.53
V
16
17
18
19
20
21
22
3
0.3 0.5 0.7 1.0 1.3 1.7 2.5
4
0.3 0.5 0.7 0.9 1.2 1.6 2.1
5
0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Accessories
K
Cover caps for hinge
arm with Glissando
> see page 3.101
Gap ZMIN=0
3.40
04b_lama_spone_st_free_R_CS2.ind3.40 3.40
8/25/10 12:22:15 PM
ST 110/90°
For wooden door cabinets with blind panels
110°
Interaxis
Interaxis
45mm
48mm
48
Ø 35
Cup type
Cranking
18 mm
6
9.5
45
Ø 35
Item
number
Item
number
248.0745.050
248.0742.050
248.0N24.050
248.0N25.050
248.0L61.050
248.0N62.050
Drilling patterns for hinge cups > see page 3.11
100 Pcs
Cup made of steel, arm made of zinc
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screws
Machine
insertion
ready
Easy-fix
system
3.41
04b_lama_spone_st_free_R_CS2.ind3.41 3.41
8/25/10 12:22:24 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
110˚
35mm
11.5mm
ST
Height
adjustment
+2/-2mm
Depth
adjustment
+5/-1.5mm
Concealed hinges
Side
adjustment
+3/-1mm
Mounting
details
Mounting plate
drilling distance
K
63.5
22
19
V
3
D
37
F
37
min75
Drawings show
application on D=0mm
thick mounting plate
Mounting plates
Drawings show
application on D=3mm
thick mounting plate
Soft-closing systems
Steel mounting plates
> see page 3.51
Glissando TL
> see page 2.13
Zinc diecast mounting
plates
> see page 3.51
Glissando PD
> see page 2.17
Steel mounting plates with
cam adjustable height
> see page 3.51
Face frame adapters
> see page 3.53
Door clearance
For further explanation > see page 3.8
V
K
16
17
18
19
20
21
22
3
0.3 0.5 0.7 1.0 1.3 1.7 2.5
4
0.3 0.5 0.7 0.9 1.2 1.6 2.1
5
0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Accessories
Cover caps for hinge
arm with Glissando
> see page 3.101
3.42
04b_lama_spone_st_free_R_CS2.ind3.42 3.42
8/25/10 12:22:31 PM
ST 110
For aluminium frame doors
110°
Interaxis
28mm
28
19
Cup type
Cranking
Item
number
950.0T27.050
0 mm
200 Pcs
Cup made of zinc, arm made of steel
3.43
04b_lama_spone_st_free_R_CS2.ind3.43 3.43
8/25/10 12:22:40 PM
• Opening angle
• Hinge on plate mounting system
110˚
ST
Depth
adjustment
+5/-1.5mm
Height
adjustment
+2/-2mm
Side
adjustment
+3/-1mm
Concealed hinges
For further explanation > see pages 3.15 - 3.17
Mounting
details
Mounting plate thickness table
For further explanation > see page 3.8
Mounting plate
drilling distance
x
17.8
S
17
13
14
15
3
2
1
0
3
2
1
0
3
2
1
0
3
2
1
16
17
18
37
63
18
G
z
x
2
19
20
37
F>Fmin
0
D
G
H
7
12
D
Drawings show
application on D=0mm
thick mounting plate
10
1.5
5.5
16
42
G
19
28
90˚
Ø7.0
H
Drilling pattern for aluminium frame hinges
Mounting plates
Screws included
Soft-closing systems
Steel mounting plates
> see page 3.51
Glissando MS
> see page 2.15
Zinc diecast mounting
plates
> see page 3.51
Glissando PD
> see page 2.17
Steel mounting plates with
cam adjustable height
> see page 3.51
Face frame adapters
> see page 3.53
Door clearance
For further explanation > see page 3.8
H
G
17
18
19
20
21
22
17
0.5 0.7 1.1 1.4 1.8 2.9
18
0.5 0.7 1.0 1.3 1.7 2.5
19
0.5 0.7 0.9 1.2 1.6 2.1
20
0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Accessories
Cover caps for hinge
arm with Glissando
> see page 3.101
Gap ZMIN=0.5
3.44
04b_lama_spone_st_free_R_CS2.ind3.44 3.44
8/25/10 12:22:42 PM
ST 170
For wooden doors
135°-165°
Interaxis
Interaxis
45mm
48mm
48
6
9.5
45
Ø 35
Ø 35
Item
number
Item
number
Cranking
248.0R14.050
248.0R17.050
0 mm
248.0M73.050
248.0R13.050
Cup type
Drilling patterns for hinge cups > see page 3.11
50 Pcs
Made of steel and zinc
Cranking
248.0R18.050
0 mm
*248.0V65.050
*248.0S69.050
With adjustable
opening angle
Drilling patterns for hinge cups > see page 3.11
* Available upon special request > see page 0.3
50 Pcs
Made of steel and zinc
Adjustable opening angle
Cranking
248.0162.050
9 mm
50 Pcs
248.0163.050
Drilling patterns for hinge cups > see page 3.11
Made of steel and zinc
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screws
Machine
insertion
ready
3.45
04b_lama_spone_st_free_R_CS2.ind3.45 3.45
8/25/10 12:22:51 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
135˚-165˚
35mm
12mm
ST
· Enables better accessibility into cabinet interior
due to the wider opening angle
· Opening angle can be easily adjusted by rotating
the appropriate screw on the hinge arm
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+5/-1.5mm
Concealed hinges
For further explanation > see pages 3.15 - 3.17
Mounting
details
Mounting plate thickness table
For further explanation > see page 3.8
Mounting plate
drilling distance
52
X
19
10
11
12
13
14
15
16
17
18
19
6
5
4
3
2
1
0
6
5
4
3
2
1
0
6
5
4
3
2
1
0
6
5
4
3
2
1
0
6
5
4
3
2
1
20
D
67
3
19
37
K
K
4
5
37
F>Fmin
6
7
C
90
°
7
1.4
0
D
Drawings show
application on D=0mm
mounting plate
In 90°position the door is
only 1.4mm distant from
side panel
C value with D=0 mounting plates
19
61
D
C
-9.0 -8.1 -7.1 -6.1 -5.2
70
6
S
7
67
V
79
67
67
S
37
V
F>Fmin
19
5
37
x
4
S
D
67
K
3
V
61
K
F>2Fmin
C
Drawings show
application on D=0mm
thick mounting plate
90
˚
7.6
Mounting plates
Drawings show
application on D=0mm
thick mounting plate
Soft-closing systems
Steel mounting plates
> see page 3.51
Glissando 170
> see page 2.15
Zinc diecast mounting
plates
> see page 3.51
Glissando PD
> see page 2.17
Steel mounting plates with
cam adjustable height
> see page 3.51
Face frame adapters
> see page 3.53
Drawings show
application on D=9mm
thick mounting plate
Drawings show
application on D=18mm
thick mounting plate.
Door clearance
For further explanation > see page 3.8
V
K
16
17
18
19
20
21
22
23
24
3
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
4
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
5
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
6
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 2.6
7
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 5.1
FMIN
Gap ZMIN=0.5
3.46
04b_lama_spone_st_free_R_CS2.ind3.46 3.46
8/25/10 12:22:57 PM
ST for pie-cut
corner cabinet
For wooden doors
Interaxis
Interaxis
45mm
48mm
48
Ø 35
Cup type
Corner
cabinet
6
9.5
45
Ø 35
Item
number
Item
number
248.0U21.050
248.0U16.050
248.0U22.050
248.0V15.050
Drilling patterns for hinge cups > see page 3.11
100 Pcs
Cup made of steel, arm made of zinc
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screws
Machine
insertion
ready
3.47
04b_lama_spone_st_free_R_CS2.ind3.47 3.47
8/25/10 12:23:08 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
110˚
35mm
11.5mm
ST
· Standard drilling for hinge and mounting plate
· Hinge integrated adjustment
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+5/-1.5mm
Concealed hinges
For further explanation > see pages 3.15 - 3.17
Mounting
details
Adjustments
Drilling details
37
32
V = 16 - 22 mm
K = 3 - 5 mm
K
35
Any ST mounting
plate of thickness
D=0 can be used
The diagonal adjustment is made
by rotating the appropriate screw as
shown on the drawing
+6
v
-2
11.5
+3
-1
+5
-1.5
D=3
Mounting plates
Accessories
Steel mounting plates
> see page 3.51
Cover caps for hinge
arm with Glissando
> see page 3.101
Zinc diecast mounting
plates
> see page 3.51
Steel mounting plates with
cam adjustable height
> see page 3.51
3.48
04b_lama_spone_st_free_R_CS2.ind3.48 3.48
8/25/10 12:23:10 PM
ST free 110
For wooden doors
110°
Interaxis
Interaxis
45 mm
48 mm
48
Ø 35
Cup type
Cranking
0mm
100 Pcs
Ø 35
Item
number
Item
number
940.0U90.650
940.0U91.650
Drilling patterns for hinge cups > see page 3.11
Cup made of zinc, arm made of steel
Cranking
940.0V67.650
9mm
100 Pcs
6
9.5
45
940.0V68.650
Drilling patterns for hinge cups > see page 3.11
Cup made of zinc, arm made of steel
Tool free assembly
3.49
04b_lama_spone_st_free_R_CS2.ind3.49 3.49
8/25/10 12:23:15 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
110˚
35mm
12mm
ST
· Toolless mounting system for hinge assembly on
wooden doors
· Quick, comfortable and precise depth adjustment
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+1.5/-1.5mm
Concealed hinges
For further explanation > see pages 3.15 - 3.17
Mounting
details
Mounting plate thickness table
For further explanation > see page 3.8
Mounting plate
drilling distance
x
17.8
S
13
14
15
16
17
18
3
2
1
0
3
2
1
0
3
2
1
0
8
9
D
3
37
63
K
4
K
z
5
D
37
F>Fmin
x
7
Drawings show
application on D=0mm
thick mounting plate
x
4
5
6
7
3
2
1
0
3
2
1
0
3
2
1
26.7
D
3
K
4
z
37
63
S
0
D
K
5
F>2Fmin
37
x
16
Drawings show
application on D=0mm
thick mounting plate
Mounting plates
Soft-closing systems
Steel mounting plates
> see page 3.51
Glissando MS
> see page 2.15
Zinc diecast mounting
plates
> see page 3.51
Glissando PD
> see page 2.17
Steel mounting plates with
cam adjustable height
> see page 3.51
Face frame adapters
> see page 3.53
Door clearance
For further explanation > see page 3.8
V
K
16
17
18
19
20
21 22
3
0.3 0.5 0.7 1.0 1.3 1.7 2.5
4
0.3 0.5 0.7 0.9 1.2 1.6 2.1
5
0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Accessories
Cover caps for hinge
arm with Glissando
> see page 3.101
Gap ZMIN=0
3.50
04b_lama_spone_st_free_R_CS2.ind3.50 3.50
8/25/10 12:23:20 PM
ST
Mounting plates
For ST free, ST plus and ST concealed hinges
Drilling pattern
Dimensions
Steel mounting
plates with cam
adjustable height
58
37
49
32
200 Pcs
Made of steel
Steel mounting
plates
58
37
52
32
200 Pcs
Made of steel
Zinc diecast
mounting
plates
60
37
50
32
200 Pcs
Made of zinc
Fixing screws for mounting plates
If not pre-mounted
Euro screws
Ø8
Ø6.3
L
821.6304.050 L=11
821.6323.050 L=13
821.6332.050 L=15
Chipboard screws
4
7.5
820.6328.050
16
1000 Pcs
5000 Pcs
3.51
04b_lama_spone_st_free_R_CS2.ind3.51 3.51
8/25/10 12:23:29 PM
%
Cam adjustable
mounting plate +/- 2mm
Mounting plate thickness
Item
number
Ø5
3.9
Item
number
Item
number
Ø6.3
Ø5
Item
number
10.5
min 10.5
Ø10
Ø5
Ø3
Ø5
Item
number
min 10.5
Ø4.5
15
13
min 10
min 8
Mounting plate
thickness (D)
5.8
15
Ø6.3
11
Ø6.3
Height adjustment +/- 2mm
15
13
min 11
11
min 12
Mounting
plate type
Concealed hinges
;
Item
number
Item
number
Item
number
0mm
244.0R22.050
244.0P71.050 244.0S92.050 *244.0P68.050 *244.0P77.050 244.0S43.050
2mm
244.0R23.050
244.0P72.050 244.0S95.050 *244.0P69.050 *244.0P78.050 244.0S44.050
3mm
244.0R24.050
244.0P73.050 244.0S96.050 *244.0P70.050 *244.0P79.050 244.0S45.050
* Available upon special request > see page 0.3
0mm
244.1136.050 *244.1233.050 244.0Z26.050 244.0134.050 244.0118.050 *244.0136.050 *244.0166.050 244.0P26.050
1mm
244.1137.050 *244.1228.050
2mm
244.1138.050 *244.1229.050 244.0Z63.050 244.0562.050 244.0120.050 *244.0566.050 *244.0568.050 244.0V19.050
3mm
244.1139.050 *244.1234.050
6mm
244.1645.050
*244.0565.050 *244.0567.050
244.0561.050
244.0135.050 244.0119.050 *244.0137.050 *244.0167.050 244.0P27.050
244.0Z51.050
* Available upon special request > see page 0.3
* Mounting plates with premounted 7.5mm expanding dowels available
upon special request > see page 0.3
9mm
244.3651.650
244.0M33.650 244.0P29.650
18mm
244.3016.650
244.0085.650 244.0095.650
* Available upon special request > see page 0.3
Legend of mounting plate type symbols
11
Screw on ready
for euro screws
< screws
Screw-on ready for
chipboard screws
Pre-mounted
11mm euro screws
13
Pre-mounted
13mm euro screws
15
Pre-mounted
15mm euro screws
10.5
Pre-mounted chipboard screws
Machine
insertion ready
Pre-mounted
10.5mm
expanding dowels
3.52
04b_lama_spone_st_free_R_CS2.ind3.52 3.52
8/25/10 12:23:44 PM
ST
Mounting plates and
face frame adapter plates
For ST free, ST plus and ST concealed hinges
Dimensions
Drilling pattern
Horizontal
mounting
plate
17
32
58
32
17
18
Ø 10
200 Pcs
Made of zinc
Face frame
adapter for
ST plus/ST 110
concealed
hinges
64
36
57
9
200 Pcs
Ø3
Made of steel
Face frame
adapter for
ST plus 125
concealed
hinges
10.8
36
57
65.8
Ø3
200 Pcs
Made of steel
Fixing screws for mounting plates
If not pre-mounted
4
7.5
Chipboard screws
820.6328.050
16
1000 Pcs
3.53
04b_lama_spone_st_free_R_CS2.ind3.53 3.53
8/25/10 12:23:49 PM
%
Mounting plate thickness
Height adjustment +/- 2mm
Height adjustment +/- 2mm
min 10.5
Mounting plate
thickness (D)
Mounting
plate type
Item
number
2mm
Concealed hinges
;
Ø10
Item
number
*244.0T92.050
This mounting plate is only available
with pre-mounted dowels for machine
insertion and of D=2mm thickness
* Available upon special request > see page 0.3
0mm
244.1638.050
3mm
244.1639.050
6mm
244.1640.050
0mm
244.1642.050
3mm
244.1643.050
6mm
244.1644.050
Legend of mounting plate type symbols
Screw-on ready for Machine
chipboard screws insertion ready
< screws
3.54
04b_lama_spone_st_free_R_CS2.ind3.54 3.54
8/25/10 12:23:54 PM
Traditional assembly system
Slide-on assembly
system
Classic and reliable
hinge-on-plate mounting
solution
04c_lama_spone_basic_R_CS2.indd 3.55
8/25/10 12:15:30 PM
Series
Basic
Last for a lifetime
Designed for a wide use
Highly adjustable
· Quality of hinges exceeds furniture
life-time expectations
· Solutions for different applications
and materials
· Different technologies of hinge cup
and mounting plate installation
· Perfect alignment even with
inaccurate drillings
3.56
04c_lama_spone_basic_R_CS2.indd 3.56
8/25/10 12:15:34 PM
Basic 110
For wooden doors
110°
Interaxis
Interaxis
45 mm
48 mm
48
Ø 35
6
9.5
45
Ø 35
Item
number
Item
number
Cranking
248.0G54.050
248.0G49.050
0 mm
248.0G79.050
248.0K40.050
Cup type
Drilling patterns for hinge cups > see page 3.11
200 Pcs
Made of steel
Cranking
248.0G55.050
248.0G50.050
9 mm
248.0G80.050
248.0K76.050
Drilling patterns for hinge cups > see page 3.11
200 Pcs
Made of steel
Cranking
248.0G56.050
248.0G51.050
15 mm
248.0G81.050
248.0L04.050
Drilling patterns for hinge cups > see page 3.11
200 Pcs
Made of steel
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screws
Machine
insertion
ready
3.57
04c_lama_spone_basic_R_CS2.indd 3.57
8/25/10 12:15:36 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
110˚
35mm
11.5mm
slide-on
Depth
adjustment
+4/-0mm
Height
adjustment
+2/-2mm
Side
adjustment
+3/-0.5mm
Mounting
details
Mounting plate
drilling distance
Mounting plate thickness table
For further explanation > see page 3.8
17.8
S
x
D
61.5
37
3
K
10
11
12
13
14
15
16
6
5
4
3
2
1
0
6
5
4
3
2
1
0
6
5
4
3
2
1
4
17
18
z
K
Concealed hinges
For further explanation > see pages 3.15 - 3.17
5
37
F>Fmin
0
D
x
V
7
Drawings show
application on D=0mm
thick mounting plate
26.7
x
D
S
0
61.5
K
2
3
4
5
6
7
6
5
4
3
2
1
0
6
5
4
3
2
1
0
6
5
4
3
2
1
0
16
17
18
19
20
21
22
3
2
2
2
3
3
3
4
4
3
3
3
4
4
4
5
5
4
4
4
5
5
5
6
20
21
22
4
8
9
z
37
3
1
K
5
37
F>2Fmin
9
D
x
V
Drawings show
application on D=0mm
thick mounting plate
16
35.7
V
37
K
61.5
D
S
K
37+V
D
F>Fmin
V
25
Drawings show
application on D=3mm
thick mounting plate
Mounting plates
Soft-closing systems
Steel mounting plates
> see page 3.75
Glissando TL
> see page 2.13
Zinc diecast mounting
plates
> see page 3.75
Glissando PD
> see page 2.17
Door clearance
For further explanation > see page 3.8
V
K
16
17
18
19
3
0.3 0.5 0.7 1.0 1.3 1.7 2.5
4
0.3 0.5 0.7 0.9 1.2 1.6 2.1
5
0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Accessories
Cover caps for hinge
arm with Glissando
> see page 3.101
Gap ZMIN=0
3.58
04c_lama_spone_basic_R_CS2.indd 3.58
8/25/10 12:15:45 PM
Basic 110/30°
30° angled application for wooden doors
110°
Interaxis
Interaxis
45 mm
48 mm
48
Ø 35
6
9.5
45
Ø 35
Item
number
Item
number
Cranking
248.0G57.050
248.0G52.050
9 mm
248.0G82.050
248.0L72.050
Cup type
Drilling patterns for hinge cups > see page 3.11
200 Pcs
Cup made of steel, arm made of zinc
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screws
Machine
insertion
ready
3.59
04c_lama_spone_basic_R_CS2.indd 3.59
8/25/10 12:15:57 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
110˚
35mm
11.5mm
slide-on
Depth
adjustment
+4/-0mm
Height
adjustment
+2/-2mm
Side
adjustment
+3/-0.5mm
Mounting
details
Mounting plate
drilling distance
Mounting plate thickness table
For further explanation > see page 3.8
x
27
Concealed hinges
For further explanation > see pages 3.15 - 3.17
2
3
4
9
10
3
2
11
12
13
14
15
S
D
59
3
L
K
4
30°
V
9.5
9
5
K
x
9
3
9
0
2
3
0
2
0
D
L
P
Drawings show
application on D=3mm
thick mounting plate
L=37 for thickness D=0
L=36 for thickness D=1
L=35 for thickness D=2
L=34 for thickness D=3
L=31 for thickness D=9
P
2.5 3.5 4.5 8.5 9.5 10.5 11.5 12.5 13.5
3
9
3
2
1
0
3
2
1
0
3
2
1
27
D
S
K
4
9
9
0
D
30
55
5
30°
K
30
9.5
P
Drawings show
application on D=3mm
thick mounting plate
Mounting plates
Soft-closing systems
Steel mounting plates
> see page 3.75
Glissando TL
> see page 2.13
Zinc diecast mounting
plates
> see page 3.75
Glissando PD
> see page 2.17
Door clearance
For further explanation > see page 3.8
O
J
'N
'
V
K
Accessories
Cover caps for hinge
arm with Glissando
> see page 3.101
16
17
18
19
20
21
22
3
0.3 0.5 0.7 1.0 1.3 1.7 2.5
4
0.3 0.5 0.7 0.9 1.2 1.6 2.1
5
0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Gap ZMIN=0
3.60
04c_lama_spone_basic_R_CS2.indd 3.60
8/25/10 12:16:06 PM
Basic 110/45°
45° angled application for wooden doors
110°
Interaxis
Interaxis
45 mm
48 mm
48
Ø 35
6
9.5
45
Ø 35
Item
number
Item
number
Cranking
248.0L32.050
248.0L27.650
9 mm
248.0N38.050
248.0L71.050
Cup type
Drilling patterns for hinge cups > see page 3.11
200 Pcs
Cup made of steel, arm made of zinc
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screws
Machine
insertion
ready
3.61
04c_lama_spone_basic_R_CS2.indd 3.61
8/25/10 12:16:14 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
110˚
35mm
11.5mm
slide-on
Depth
adjustment
+4/-0mm
Height
adjustment
+2/-2mm
Side
adjustment
+3/-0.5mm
Mounting
details
Mounting plate
drilling distance
Mounting plate thickness table
For further explanation > see page 3.8
x
D
28.5
Concealed hinges
For further explanation > see pages 3.15 - 3.17
11.5 12.5 13 13.5 14 14.5 15 15.5 16 16.5 17 18
S
3
4
2
1
3
0
2
1
0
L
58
K
3
K
45°
4.8
5
L
3
2
1
0
9.5 10 10.5
11 11.5 12 12.5 13.5
D
x
V
L=36 for thickness D=0
L=35 for thickness D=1
L=34 for thickness D=2
L=33 for thickness D=3
P
Drawings show
application on D=3mm
thick mounting plate
D
28.5
P
9
3
S
4
2
3
1
0
2
1
0
3
2
1
23
48
K
3
5
0
D
K
45°
V
4.8
P
Drawings show
application on D=3mm
thick mounting plate
Mounting plates
Soft-closing systems
Steel mounting plates
> see page 3.75
Glissando TL
> see page 2.13
Zinc diecast mounting
plates
> see page 3.75
Glissando PD
> see page 2.17
Door clearance
For further explanation > see page 3.8
O
J
'N
'
V
K
Accessories
Cover caps for hinge
arm with Glissando
> see page 3.101
16
17
18
19
20
21
22
3
0.3 0.5 0.7 1.0 1.3 1.7 2.5
4
0.3 0.5 0.7 0.9 1.2 1.6 2.1
5
0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Gap ZMIN=0
3.62
04c_lama_spone_basic_R_CS2.indd 3.62
8/25/10 12:16:21 PM
Basic 110/45°
45° angled application for wooden doors
110°
Interaxis
Interaxis
45 mm
48 mm
48
Ø 35
6
9.5
45
Ø 35
Item
number
Item
number
Cranking
248.0L33.650
248.0L28.650
18 mm
248.0L46.050
248.0L70.050
Cup type
Drilling patterns for hinge cups > see page 3.11
100 Pcs
Cup made of steel, arm made of zinc
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screws
Machine
insertion
ready
3.63
04c_lama_spone_basic_R_CS2.indd 3.63
8/25/10 12:16:29 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
110˚
35mm
11.5mm
slide-on
Depth
adjustment
+4/-0mm
Height
adjustment
+2/-2mm
Side
adjustment
+3/-0.5mm
Mounting
details
Mounting plate thickness table
For further explanation > see page 3.8
Mounting plate
drilling distance
D
38.5
S
37
63.5
K
45°
K
Concealed hinges
For further explanation > see pages 3.15 - 3.17
3
0
4
1
5
2
D
37
V
15
Drawings show
application on D=0mm
thick mounting plate
19
48
73
D=18
56.5
45°
K
48
19
Drawings show application
on D=18mm thick
mounting plate
Mounting plates
Soft-closing systems
Steel mounting plates
> see page 3.75
Glissando TL
> see page 2.13
Zinc diecast mounting
plates
> see page 3.75
Glissando PD
> see page 2.17
Door clearance
For further explanation > see page 3.8
O
J
'N
'
V
K
Accessories
Cover caps for hinge
arm with Glissando
> see page 3.101
16
17
18
19
20
21
22
3
0.3 0.5 0.7 1.0 1.3 1.7 2.5
4
0.3 0.5 0.7 0.9 1.2 1.6 2.1
5
0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Gap ZMIN=0
3.64
04c_lama_spone_basic_R_CS2.indd 3.64
8/25/10 12:16:36 PM
Basic 110/90°
For wooden door cabinets with blind panels
110°
Interaxis
Interaxis
45 mm
48 mm
48
Ø 35
Cup or
mounting
plate type
6
9.5
45
Ø 35
Item
number
Item
number
Cranking
248.0G58.050
248.0G53.050
18 mm
248.0G83.050
248.0L73.050
Drilling patterns for hinge cups > see page 3.11
200 Pcs
Cup made of steel, arm made of zinc
248.0255.050
Cranking
0 mm
200 Pcs
248.0V66.050
Drilling patterns for hinge cups > see page 3.11
Cup made of steel, arm made of zinc
244.0810.650
Blind panel
mounting
plate
15
244.0P28.650
This mounting plate can be used only
with Basic 110/90° hinges.
Information about mounting plate symbols
> see page 3.76
200 Pcs
Made of zinc
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screws
Machine
insertion
ready
Pre-mounted
euro screws
3.65
04c_lama_spone_basic_R_CS2.indd 3.65
8/25/10 12:16:44 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
110˚
35mm
11.5mm
slide-on
Depth
adjustment
+4/-0mm
Height
adjustment
+2/-2mm
Concealed hinges
Side
adjustment
+3/-0.5mm
Mounting
details
Mounting plate
drilling distance
K
F
9
min22
19
V
S
X
9
K
min22
32
9
Mounting plates
These hinges can only be used
with blind panel mounting plates
Door clearance
For further explanation > see page 3.8
V
K
16
17
18
19
20
21
22
3
0.3 0.5 0.7 1.0 1.3 1.7 2.5
4
0.3 0.5 0.7 0.9 1.2 1.6 2.1
5
0.3 0.5 0.7 0.9 1.2 1.5 2
FMIN
Gap Z=0
3.66
04c_lama_spone_basic_R_CS2.indd 3.66
8/25/10 12:16:52 PM
Basic 110
For aluminium frame doors
110°
Aluminium
frame cup
28 mm
28
19
Cup type
Cranking
Item
number
950.0T26.050
0 mm
200 Pcs
Cup made of zinc, arm made of steel
3.67
04c_lama_spone_basic_R_CS2.indd 3.67
8/25/10 12:16:52 PM
• Opening angle
• Hinge on plate mounting system
110˚
slide-on
Depth
adjustment
+4/-0mm
Height
adjustment
+2/-2mm
Side
adjustment
+3/-0.5mm
Mounting
details
Mounting plate thickness table
For further explanation > see page 3.8
Mounting plate
drilling distance
x
17.8
S
Concealed hinges
For further explanation > see pages 3.15 - 3.17
12
13
14
15
16
17
18
17
3
2
1
0
18
4
3
2
1
0
19
5
4
3
2
1
0
20
6
5
4
3
2
1
0
21
22
G
z
x
37
61.5
D
37
2
F>Fmin
D
G
7+D
10
1.5
5.5
16
42
G
19
28
90˚
Ø7.0
H
Drilling pattern for aluminium frame hinges
Mounting plates
Screws included
Soft-closing systems
Steel mounting plates
> see page 3.75
Glissando MS
> see page 2.15
Zinc diecast mounting
plates
> see page 3.75
Glissando PD
> see page 2.17
Door clearance
For further explanation > see page 3.8
H
G
17
18
19
20
17
0.5 0.7 1.1 1.4 1.8 2.9
18
0.5 0.7 1.0 1.3 1.7 2.5
19
0.5 0.7 0.9 1.2 1.6 2.1
20
0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Accessories
Cover caps for hinge
arm with Glissando
> see page 3.101
Gap ZMIN=0.5
3.68
04c_lama_spone_basic_R_CS2.indd 3.68
8/25/10 12:16:54 PM
Basic 170
For wooden doors
135°-165°
Interaxis
Interaxis
45 mm
48 mm
48
6
9.5
45
Ø 35
Cup type
Cranking
0 mm
Ø 35
Item
number
Item
number
248.0R10.050
248.0P43.050
248.0L51.050
248.0R12.050
Drilling patterns for hinge cups > see page 3.11
50 Pcs
Made of steel and zinc
Cranking
*248.0S05.050
0 mm
Drilling patterns for hinge cups > see page 3.11
With adjustable
opening angle
50 Pcs
* Available upon special request > see page 0.3
Made of steel and zinc
Adjustable opening angle
Cranking
248.0160.050
9 mm
50 Pcs
*248.0S06.050
248.0161.050
Drilling patterns for hinge cups > see page 3.11
Made of steel and zinc
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screws
Machine
insertion
ready
3.69
04c_lama_spone_basic_R_CS2.indd 3.69
8/25/10 12:17:02 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
135°-165°
35mm
12mm
slide-on
· Enable better accessibility into cabinet interior due to the
wider opening angle
· Opening angle can be easily adjusted by rotating the
appropriate screw on hinge arm
Depth
adjustment
+4/-0mm
Height
adjustment
+2/-2mm
Side
adjustment
+3/-0.5mm
Mounting
details
Concealed hinges
For further explanation > see pages 3.15 - 3.17
Mounting plate thickness table
For further explanation > see page 3.8
Mounting plate
drilling distance
19
52
D
X
11
12
13
14
15
16
17
18
19
6
5
4
3
2
1
0
6
5
4
3
2
1
0
6
5
4
3
2
1
0
6
5
4
3
2
1
0
6
5
4
3
2
1
20
37
67
3
10
x
19
K
K
4
F>Fmin
5
37
6
90
º
C
1.4
7
0
D
Drawings show
application on
D=0mm thick
mounting plate
C value with D=0 mounting plates
K
3
4
5
6
7
C
-9.0 -8.1 -7.1 -6.1 -5.2
19
61
S
61
D
S
79
S
70
D
D
67
37
37
67
67
x
K
37
67
D
V
V
V
19
F>Fmin
C
F>2Fmin
Drawings show
application on
D=0mm thick
mounting plate
90
˚
7.6
Mounting plates
Drawings show
application on D=0mm
thick mounting plate
Soft-closing systems
Steel mounting plates
> see page 3.75
Glissando 170
> see page 2.15
Zinc diecast mounting
plates
> see page 3.75
Glissando PD
> see page 2.17
Drawings show
application on D=9mm
thick mounting plate
Drawings show
application on D=18mm
mounting plate.
Door clearance
For further explanation > see page 3.8
V
K
16
17
18
19
20
21
22
23
24
3
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
4
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
5
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
6
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 2.6
7
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 5.1
FMIN
Gap ZMIN=0.5
3.70
04c_lama_spone_basic_R_CS2.indd 3.70
8/25/10 12:17:08 PM
Basic
for pie-cut corner cabinet
For wooden doors
Interaxis
Interaxis
45 mm
48 mm
48
Ø 35
Cup type
Corner
cabinet
6
9.5
45
Ø 35
Item
number
Item
number
248.0T81.050
248.0T80.050
248.0U13.050
248.0U14.050
Drilling patterns for hinge cups > see page 3.11
100 Pcs
Cup made of steel, arm made of zinc
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screws
Machine
insertion
ready
3.71
04c_lama_spone_basic_R_CS2.indd 3.71
8/25/10 12:17:16 PM
• Drilling diameter for hinge cup
• Drilling depth
• Hinge on plate mounting system
35mm
11.5mm
slide-on
· Standard drilling for hinge and mounting plate
· Hinge integrated adjustment
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+5/-1.5mm
Mounting
details
Concealed hinges
For further explanation > see pages 3.15 - 3.17
Adjustments
Drilling details
37
32
V = 16 - 22 mm
K = 3 - 5 mm
K
35
Any Basic mounting
plate of thickness
D=0 can be used.
The diagonal adjustment is made
by rotating the appropriate screw as
shown on the drawing.
+6
-2
11.5
+3
-1
+5
-1.5
D=3
Mounting plates
Accessories
Steel mounting plates
> see page 3.75
Cover caps for hinge
arm with Glissando
> see page 3.101
Zinc diecast mounting
plates
> see page 3.75
3.72
04c_lama_spone_basic_R_CS2.indd 3.72
8/25/10 12:17:19 PM
Basic
Flap door hinge
For wooden doors
90°
Interaxis
24mm
Cup
type
24
38
Ø35
21.5
Item
number
Cranking
left
926.0A26.050
0mm
right
926.0A27.050
200 Pcs
Made of steel
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
820.6308.050
2000 Pcs
Screw-on
< screws
3.73
04c_lama_spone_basic_R_CS2.indd 3.73
8/25/10 12:17:23 PM
•
•
•
•
Opening angle
Mounted on the cabinet side
Standard drillings
Hinge on plate mounting mechanisms
90°
35mm
11,5mm
slide-on
- To be used with flap stay mechanisms
- Mounted on the cabinet side
- Standard drillings
Depth
adjustment
+4/-0mm
Height
adjustment
+2/-2mm
Side
adjustment
+0.5/-0.5mm
Mounting
details
Concealed hinges
For further explanation > see pages 3.15 - 3.17
Mounting plate thickness table
For further explanation > see page 3.8
37
Ø5
D
0
1
2
3
B (mm)
20
21
22
23
D=mounting plate height
K=B-6
X=A+K+10
32
V
32
C
A
2
S
min 1
B
11.5
K
Ø35
X
Door clearance
Accessories
Mounting plates
Steel mounting plates
> see page 3.75
Zinc diecast mounting
plates
> see page 3.75
Cover caps for hinge
arm with Glissando
> see page 3.101
V
K
16
17
18
19
20
21
22
3
0.3 0.5 0.7 1.0 1.3 1.7 2.5
4
0.3 0.5 0.7 0.9 1.2 1.6 2.1
5
0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Gap ZMIN=0
3.74
04c_lama_spone_basic_R_CS2.indd 3.74
8/25/10 12:17:31 PM
Basic
Mounting plates
For Basic concealed hinges
Drilling pattern
Dimensions
Steel
mounting
plates
0
1
2
60.3
3
37
52
32
200 Pcs
Made of steel
Zinc diecast
mounting
plates
4
5
6
60
9
37
18
50
32
200 Pcs
Made of zinc
Fixing screws for mounting plates
If not pre-mounted
Euro screws
Ø8
Ø6.3
L
821.6304.050 L=11
821.6323.050 L=13
821.6332.050 L=15
4
7.5
Chipboard screws
820.6328.050
16
1000 Pcs
5000 Pcs
3.75
04c_lama_spone_basic_R_CS2.indd 3.75
8/25/10 12:17:36 PM
%
Height adjustment +/- 2mm
3.9
5.8
Item
number
Item
number
Ø5
Item
number
Ø6.3
Ø5
Item
number
Ø10
min 10.5
Ø4.5
Item
number
Item
number
Ø5
Ø5
Ø3
Ø5
Item
number
10.5
min 7.5
15
13
min 9
min 8
Mounting plate
thickness (D)
11
Ø6.3
7.5
min 10.5
Ø6.3
15
15
13
min 11
11
min 11
Mounting
plate type
Mounting plate thickness
Item
number
Concealed hinges
;
Item
number
0 mm 244.0866.050 *244.0L29.050 244.0963.050 244.0965.050 244.0929.050 *244.0L26.050 *244.0L50.050 244.0H64.050 244.0P24.050
1 mm 244.0T40.050
244.0307.050 244.0K95.050
*244.0S65.050
2 mm 244.0T28.050
244.0Z64.050 244.0K96.050
*244.0S66.050 *244.0V64.050 244.0S68.050
244.0S67.050
3 mm 244.0867.050 *244.0L39.050 244.0L66.050 244.0G19.050 244.0930.050 *244.0L98.050 *244.0L40.050 244.0H65.050 244.0P25.050
* Available upon special request > see page 0.3
4 mm 244.0L37.650
244.0K97.650
244.0M28.650
5 mm 244.0L38.650
244.0K98.650 244.0T14.650
244.0M29.650
6 mm 244.0232.650
244.0914.650
9 mm 244.0062.650
244.0067.650 244.0P41.650
18 mm 244.0063.650
244.0068.650 244.0175.650
*244.0B12.650
* Available upon special request > see page 0.3
Legend of mounting plate type symbols
11
Screw on ready
for euro screws
< screws
Screw-on ready for
chipboard screws
Pre-mounted
11mm euro screws
13
Pre-mounted
13mm euro screws
15
Pre-mounted
15mm euro screws
7.5
Pre-mounted chipboard screws
Machine
insertion ready
Premounted
7.5mm expanidng
dowels
10.5
Pre-mounted
10.5mm
expanding dowels
3.76
04c_lama_spone_basic_R_CS2.indd 3.76
8/25/10 12:17:44 PM
Basic
Mounting plates
For Basic concealed hinges
Drilling pattern
Dimensions
Steel mounting plates
· Back-to back
application
60.3
37
52
32
200 Pcs
Made of steel
Zinc diecast
mounting plates
· For 18mm inset doors
80
37
50
32
200 Pcs
Made of zinc
Fixing screws for mounting plates
If not pre-mounted
Euro screws
Ø8
Ø6.3
L
821.6304.050 L=11
821.6323.050 L=13
821.6332.050 L=15
4
7.5
Chipboard screws
820.6328.050
16
1000 Pcs
5000 Pcs
3.77
04c_lama_spone_basic_R_CS2.indd 3.77
8/25/10 12:17:49 PM
%
Height adjustment +/- 2mm
10.5
S 15
Mounting plate
thickness (D)
Mounting
plate type
Mounting plate thickness
Concealed hinges
;
Ø5
5.8
Item
number
Item
number
244.0V50.050
3 mm
37
5
S>=1
Minimum panel
thickness is 15mm.
244.0036.650
V=18
37
2 mm
Fits standard 37mm drilling
Legend of mounting plate type symbols
10.5
Screw on ready
for euro screws
< screws
Pre-mounted
10.5mm
expanding dowels
3.78
04c_lama_spone_basic_R_CS2.indd 3.78
8/25/10 12:17:59 PM
A reliable hinge for
smaller cabinets
Simplicity of key-hole
The cabinet door is securely
positioned even before the screws
are fixed
04d_lama_spone_miniprimat_R_CS2.3.79 3.79
8/25/10 3:24:59 PM
Series
Miniprimat
Different application
possibilites
Save your time
· Easy-fix quick mounting system
· For a wide range of needs
3.80
04d_lama_spone_miniprimat_R_CS2.3.80 3.80
8/25/10 3:25:02 PM
Miniprimat 95
For wooden doors
95°
Interaxis
38 mm
7.5
38
Ø 26
Item
number
Cup type
Cranking
243.0B35.050
0 mm
8
243.0B38.050
*243.0M64.050
243.0L88.050
*243.0E06.050
Drilling patterns for hinge cups
> see page 3.11
* Available upon special request
> see page 0.3
200 Pcs
Made of steel
243.0B36.050
Cranking
9 mm
8
243.0B39.050
*243.0M65.050
243.0L89.050
*243.0E07.050
Drilling patterns for hinge cups
> see page 3.11
* Available upon special request
> see page 0.3
200 Pcs
Made of steel
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
8
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screw
Machine
insertion
ready
8mm
Easy-fix
system
Pre-mounted
chipboard
screws
Pre-mounted
euro screws
3.81
04d_lama_spone_miniprimat_R_CS2.3.81 3.81
8/25/10 3:25:04 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
95˚
26 mm
12mm
key-hole
All Miniprimat steel made mounting plates can be used for
L=28mm or 37mm drilling distance by simple rotation
Depth
adjustment
+4/-0mm
Height
adjustment
+2/-2mm
Side
adjustment
+3/- 0mm
Concealed hinges
For further explanation > see pages 3.15 - 3.17
Mounting
details
Mounting plate thickness table
For further explanation > see page 3.8
Mounting plate
drilling distance
x
9.5 10.5 11.5 12.5 13.5 14.5 15.5 16.5 17.5 18.5 19.5
16
S
D
3
6
K
53.5
L
4
K
3
6
5
2
1
0
3
2
1
0
3
2
1
0
3
2
1
0
3
2
1
6
L=37
6
z
V
6
F>Fmin
x
7
6
0
D
4
Drawings show
application on D=0mm
thick mounting plate
L=28
x
19
0.5 1.5 2.5 3.5 4.5 5.5 6.5 7.5 8.5 9.5 10.5
3
D
6
53.5
z
L
4
K
3
6
5
2
1
0
3
2
1
0
3
2
1
0
3
2
1
0
3
2
1
6
L=37
6
V
6
F>2Fmin
7
x
6
0
D
Drawings show
application on D=0mm
thick mounting plate
L=28
Mounting plates
Zinc diecast
mounting plates
> see page 3.93
Sof-closing systems
Glissando MS
> see page 2.15
Door clearance
For further explanation > see page 3.8
Gap
For further explanation > see page 3.8
V
K
13
14
15
16
17
18
19
20
V
13
14
15
16
17
18
19
20
3
0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7
3
0.2 0.3 0.5 0.8 1.1 1.5 2.2 3.0
4
0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7
4
0.2 0.3 0.5 0.8 1.0 1.4 1.9 2.6
5
1.3 1.4 1.7 1.4 1.4 1.5 1.5 1.5
5
0.2 0.3 0.5 0.7 1.0 1.3 1.7 2.3
6
2.3 2.4 2.7 2.4 2.4 2.5 2.5 2.6
6
0.2 0.3 0.5 0.7 0.9 1.2 1.6 2.0
7
3.3 3.4 3.7 3.4 3.4 3.5 3.5 3.6 ZMIN
7
0.2 0.3 0.5 0.7 0.9 1.2 1.5 1.9 FMIN
K
3.82
04d_lama_spone_miniprimat_R_CS2.3.82 3.82
8/25/10 3:25:08 PM
Miniprimat 95
For wooden doors
95°
Interaxis
38 mm
7.5
38
Ø 26
Item
number
Cup type
Cranking
243.0B37.050
15 mm
8
243.0B40.050
*243.0M42.050
243.0L90.050
*243.0E08.050
Drilling patterns for hinge cups
> see page 3.11
* Available upon special request
> see page 0.3
200 Pcs
Made of steel
243.0F92.050
Cranking
18 mm
8
243.0P42.050
*243.0K71.050
243.0K69.050
*243.0K70.050
Drilling patterns for hinge cups
> see page 3.11
* Available upon special request
> see page 0.3
200 Pcs
Made of steel
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
8
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screw
Machine
insertion
ready
8mm
Easy-fix
system
Pre-mounted
chipboard
screws
Pre-mounted
euro screws
3.83
04d_lama_spone_miniprimat_R_CS2.3.83 3.83
8/25/10 3:25:11 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
95˚
26mm
12mm
key-hole
All Miniprimat steel made mounting plates can be used for
L=28mm or 37mm drilling distance by simple rotation
Depth
adjustment
+4/-0mm
Height
adjustment
+2/-2mm
Side
adjustment
+3/- 0mm
Concealed hinges
For further explanation > see pages 3.15 - 3.17
Mounting
details
Mounting plate thickness table
For further explanation > see page 3.8
Mounting plate
drilling distance
V
28
S
13
14
15
16
17
18
19
20
3
2
2
2
2
2
3
3
3
4
3
3
3
3
3
5
3
3
3
7
6
6
6
13
14
15
16
17
18
19
20
3
0
0
0
0
0
0
0
1
4
0
0
0
0
0
0
1
2
5
0
0
1
1
1
1
2
3
6
1
1
2
2
2
2
3
7
2
2
3
3
3
3
K
K
53.5
L
D
V
L=37+V
F>Fmin
D
22
Drawings show
application on D=3mm
thick mounting plate
L=28+V
V
28
S
L
K
53.5
D
K
L=37+V
V
F>Fmin
D
22
Drawings show
application on D=0mm
thick mounting plate
L=28+V
Mounting plates
Zinc diecast
mounting plates
> see page 3.93
Sof-closing systems
Glissando MS
> see page 2.15
Door clearance
For further explanation > see page 3.8
Gap
For further explanation > see page 3.8
V
K
13
14
15
16
17
18
19
20
V
13
14
15
16
17
18
19
20
3
0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7
3
0.2 0.3 0.5 0.8 1.1 1.5 2.2 3.0
4
0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7
4
0.2 0.3 0.5 0.8 1.0 1.4 1.9 2.6
5
1.3 1.4 1.7 1.4 1.4 1.5 1.5 1.5
5
0.2 0.3 0.5 0.7 1.0 1.3 1.7 2.3
6
2.3 2.4 2.7 2.4 2.4 2.5 2.5 2.6
6
0.2 0.3 0.5 0.7 0.9 1.2 1.6 2.0
7
3.3 3.4 3.7 3.4 3.4 3.5 3.5 3.6 ZMIN
7
0.2 0.3 0.5 0.7 0.9 1.2 1.5 1.9 FMIN
K
3.84
04d_lama_spone_miniprimat_R_CS2.3.84 3.84
8/25/10 3:25:15 PM
Miniprimat 95/45°
45° angled application for wooden doors
95°
Interaxis
38 mm
7.5
38
Ø 26
Item
number
Cup type
Cranking
243.0002.050
18 mm
10
*243.0S97.050
243.0Z11.050
Drilling patterns for hinge cups
> see page 3.11
* Available upon special request
> see page 0.3
200 Pcs
Cup made of steel, arm made of zinc
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
8
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< Screw
10
Machine
insertion
ready
8mm
Machine
insertion
ready
10mm
Easy-fix
system
Pre-mounted
chipboard
screws
Pre-mounted
euro screws
3.85
04d_lama_spone_miniprimat_R_CS2.3.85 3.85
8/25/10 3:25:18 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
95˚
26mm
12mm
key-hole
All Miniprimat steel made mounting plates can be used
for L=28mm or 37mm drilling distance by simple rotation
Depth
adjustment
+4/-0mm
Height
adjustment
+2/-2mm
Side
adjustment
+3/- 0mm
Concealed hinges
For further explanation > see pages 3.15 - 3.17
Mounting plate thickness table
For further explanation > see page 3.8
Mounting plate
drilling distance
Mounting
details
28
K
3
4
5
6
7
D
0
1
2
3
9
S
37
53.5
D
L=37
45
°
K
V
14
L=28
Mounting plates
Zinc diecast
mounting plates
> see page 3.93
Door clearance
For further explanation > see page 3.8
Gap
For further explanation > see page 3.8
V
13
14
15
16
17
18
19
20
V
13
14
15
16
17
18
19
20
O
K
3
0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7
3
0.2 0.3 0.5 0.8 1.1 1.5 2.2 3.0
4
0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7
4
0.2 0.3 0.5 0.8 1.0 1.4 1.9 2.6
5
1.3 1.4 1.7 1.4 1.4 1.5 1.5 1.5
5
0.2 0.3 0.5 0.7 1.0 1.3 1.7 2.3
6
2.3 2.4 2.7 2.4 2.4 2.5 2.5 2.6
6
0.2 0.3 0.5 0.7 0.9 1.2 1.6 2.0
7
3.3 3.4 3.7 3.4 3.4 3.5 3.5 3.6 ZMIN
7
0.2 0.3 0.5 0.7 0.9 1.2 1.5 1.9 FMIN
K
J
'N
'
3.86
04d_lama_spone_miniprimat_R_CS2.3.86 3.86
8/25/10 3:25:21 PM
Miniprimat 95/90°
For wooden door cabinets with blind panels
95°
Interaxis
38 mm
7.5
38
Ø 26
Cup type
Item
number
243.0B51.050
Cranking
18mm
13
*243.0U26.050
Drilling patterns for hinge cups
> see page 3.11
* Available upon special request
> see page 0.3
200 Pcs
Cup made of steel, arm made of zinc
243.0Z84.050
Cranking
0 mm
Drilling patterns for hinge cups
> see page 3.11
200 Pcs
Made of zinc
244.0A49.650
Blind panel
mounting
plate
13
*244.0A50.650
This mounting plate can be used
only with Miniprimat 95/90° hinges.
Information about mounting plate
symbols > see page 3.93
* Available upon special request
500 Pcs
> see page 0.3
Made of zinc
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
10
8
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< Screw
Machine
insertion
ready
8mm
Machine
insertion
ready
10mm
Easy-fix
system
Pre-mounted
chipboard
screws
Pre-mounted
euro screws
3.87
04d_lama_spone_miniprimat_R_CS2.3.87 3.87
8/25/10 3:25:22 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
95˚
26mm
12mm
key-hole
Depth
adjustment
+4/-0mm
Height
adjustment
+2/-2mm
Concealed hinges
Side
adjustment
+3/- 0mm
Mounting plate
drilling distance
Mounting
details
V
K
min 27
8
S
18
F
K
min 27
F
Mounting plates
8
Door clearance
For further explanation > see page 3.8
V
These hinges can only be used
with blind panel mounting plates
K
13
14
15
16
17
18
19
20
3
0.2 0.3 0.5 0.8 1.1 1.5 2.2 3.0
4
0.2 0.3 0.5 0.8 1.0 1.4 1.9 2.6
5
0.2 0.3 0.5 0.7 1.0 1.3 1.7 2.3
6
0.2 0.3 0.5 0.7 0.9 1.2 1.6 2.0
7
0.2 0.3 0.5 0.7 0.9 1.2 1.5 1.9 FMIN
3.88
04d_lama_spone_miniprimat_R_CS2.3.88 3.88
8/25/10 3:25:28 PM
Miniprimat 95
For glass door
95°
Hinge cup for
glass door
Ø 26
Cup type
Item
number
245.0659.850
Cranking
0mm
200 Pcs
Cup made of plastic, arm made of steel
245.0926.850
Cranking
9mm
200 Pcs
Cup made of plastic, arm made of steel
Legend of hinge cup symbols
Ready to assemble on
glass door. Screws and
cup rings included with
cover caps.
3.89
04d_lama_spone_miniprimat_R_CS2.3.89 3.89
8/25/10 3:25:29 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Glass thickness
Hinge on plate mounting system
95˚
26mm
4-6mm
key-hole
All Miniprimat steel made mounting plates can be
used for L=28mm or 37mm drilling distance by
simple rotation
Mounting plate
drilling distance
Mounting
details
Concealed hinges
For further explanation > see pages 3.15 - 3.17
Mounting plate thickness table
For further explanation > see page 3.8
x
16
S
Depth
adjustment
+4/-0mm
Height
adjustment
+2/-2mm
Side
adjustment
+3/- 0mm
9.5 10.5 11.5 12.5 13.5 14.5 15.5 16.5 17.5 18.5 19.5
D
K
6
4
53.5
L
3
z
K
3
6
5
2
1
0
3
2
1
0
3
2
1
0
3
2
1
0
3
2
1
6
4-6
L=37
6
x
4
6
7
6
0
D
Drawings show application on
D=0mm thick mounting plate
L=28
19
S
x
D
0.5 1.5 2.5 3.5 4.5 5.5 6.5 7.5 8.5 9.5 10.5
4
6
3
6
2
1
0
3
2
1
0
3
2
1
0
3
2
1
0
3
2
1
z
K
53.5
L
3
K
5
6
4-6
L=37
6
x
13
7
6
6
0
D
Drawings show application on
D=0mm thick mounting plate
L=28
Mounting plates
Zinc diecast
mounting plates
> see page 3.93
Accessories
Cover caps for hinge
cup
> see page 3.101
Sof-closing systems
Glissando MS
> see page 2.15
3.90
04d_lama_spone_miniprimat_R_CS2.3.90 3.90
8/25/10 3:25:31 PM
Miniprimat 95
For glass door
95°
Hinge cup for
glass door
Ø 26
Cup type
Cranking
Item
number
245.0660.850
15 mm
200 Pcs
Cup made of plastic, arm made of steel
245.0009.850
Cranking
18 mm
200 Pcs
Cup made of plastic, arm made of steel
Legend of hinge cup symbols
Ready to assemble on
glass door. Screws and
cup rings included with
cover caps.
3.91
04d_lama_spone_miniprimat_R_CS2.3.91 3.91
8/25/10 3:25:35 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Glass thickness
Hinge on plate mounting system
95˚
26mm
4-6mm
key-hole
Height
adjustment
+2/-2mm
Depth
adjustment
+4/-0mm
For further explanation > see pages 3.15 - 3.17
Concealed hinges
All Miniprimat steel made mounting plates can be used
for L=28mm or 37mm drilling distance by simple rotation
Side
adjustment
+3/- 0mm
Mounting
details
Mounting plate
drilling distance
Mounting plate thickness table
For further explanation > see page 3.8
28
S
D
H
4-6
K
53.5
L
K
3
2
4
3
5
3
7
6
3
0
4
0
5
0
6
1
7
2
L=37+H
D
22
Drawings show
application on D=3mm
thick mounting plate
L=28+H
28
S
L
53.5
D
d=4-6
K
H
K
L=37+H
22
D
Drawings show
application on D=0mm
thick mounting plate
L=28+H
Mounting plates
Zinc diecast
mounting plates
> see page 3.93
Accessories
Cover caps for hinge
cup
> see page 3.101
Sof-closing systems
Glissando MS
> see page 2.15
3.92
04d_lama_spone_miniprimat_R_CS2.3.92 3.92
8/25/10 3:25:37 PM
Miniprimat
Mounting plates
For Miniprimat concealed hinges
Drilling pattern
Dimensions
Steel mounting
plates
53.5
37/28
53
32
500 Pcs
Made of steel
Zinc diecast
mounting
plates
53.5
37
53
32
500 Pcs
Made of zinc
Fixing screws for mounting plates
If not pre-mounted
Euro screws
Ø8
Ø6.3
L
821.6304.050 L=11
821.6323.050 L=13
821.6332.050 L=15
4
7.5
Chipboard screws
820.6328.050
16
1000 Pcs
5000 Pcs
3.93
04d_lama_spone_miniprimat_R_CS2.3.93 3.93
8/25/10 3:25:40 PM
%
Mounting plate thickness
Height adjustment +/- 2mm
5.8
Item
number
Ø5
Item
number
Ø6.3
Ø5
Item
number
Ø4.5
Ø5
Ø3
Ø5
Item
number
Ø10
min 7.5
15
13
min 9
min 8
Mounting plate
thickness (D)
11
Ø6.3
7.5
min 10.5
Ø6.3
15
15
13
min 11
11
min 11
Mounting
plate type
Concealed hinges
;
Item
number
Item
number
0mm
244.0655.050 244.0104.050 244.0846.050 *244.0868.050 *244.0M14.050 *244.0L54.050
2mm
244.0U93.050 244.0U78.050 244.0U94.050
3mm
244.0656.050 244. 0U72.050 244.0847.050 *244.0869.050 *244.0M15.050 *244.0L55.050
Item
number
244.0H62.050
*244.0V54.050
244.0H63.050
* Available upon special request > see page 0.3
1mm
244.0851.650
244.0853.650
*244.0H88.650
6mm
244.0G21.650
244.0E90.650
*244.0T55.650
9mm
244.0913.650 244.0022.650
244.0845.650
* Available upon special request > see page 0.3
Legend of mounting plate type symbols
11
Screw on ready
for euro screws
< screws
Pre-mounted
11mm euro screws
13
Pre-mounted
13mm euro screws
15
Pre-mounted
15mm euro screws
7.5
Pre-mounted chipboard screws
Machine
insertion ready
Pre-mounted
7.5mm
expanding dowels
3.94
04d_lama_spone_miniprimat_R_CS2.3.94 3.94
8/25/10 3:25:46 PM
Simplicity of key-hole
Easy mounting of cabinet door
04d_lama_spone_miniprimat_R_CS2.3.95 3.95
8/25/10 3:25:49 PM
Special
hinges
Specific solutions for
special applications
270° opening angle
For refrigerator cabinets
3.96
04d_lama_spone_miniprimat_R_CS2.3.96 3.96
8/25/10 3:25:54 PM
Wide angle hinge
For wooden doors
270°
Cup type
Nickel
plated
With spring
Without spring
Item
number
Item
number
241.0043.650
241.0074.650
241.0050.650
100 Pcs
Made of zinc
D=0mm
Mounting plate
Nickel plated
244.0907.650
13
244.0848.650
244.0D99.650
D=2mm
13
244.0E02.650
244.0D47.650
D=6mm
13
244.0D46.650
This mounting plate can be used only
with Wide angle hinge.
Information about mounting plate symbols
> see page 3.93
500 Pcs
Made of zinc
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screws
Machine
insertion
ready
Pre-mounted
13mm euro
screws
3.97
04d_lama_spone_miniprimat_R_CS2.3.97 3.97
8/25/10 3:25:57 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
270°
35mm
12. 5mm
key-hole
Depth
adjustment
+4/-0mm
Height
adjustment
+2/-2mm
Side
adjustment
+3/-0mm
Concealed hinges
For further explanation > see pages 3.15 - 3.17
With spring
Mounting
details
Without spring
Drilling details
S
Mounting plate thickness table
S
6.5
16
0
17
2
18
19
20
21
22
23 24
0
3552
1
V
2
4
5
D
0
2
6
3552
30
V
V
2
6
0
2
0
6
7
6
2
6
8
0
2
6
2
7
18.5
7
18
9
10
Drawings show
application on
D=6mm thick
mounting plate
11
12
37
0
6.5
P
P
2
3
Drawings show
application on D=0
mounting plate and
S=18 side panel.
min.F = 0.5
0
11.5
7
18
S
2
6
6
6
6
D
32
37
Mounting plate
drilling distance
Door thickness
For correct opening the door
thickness should not exceed
(VMAX) 21mm
3.98
04d_lama_spone_miniprimat_R_CS2.3.98 3.98
8/25/10 3:25:59 PM
Hinge for cabinet with
refrigerator
For wooden doors
110°
Interaxis
Interaxis
45mm
48mm
48
Ø 35
Cup type
Item
number
248.0R09.050
Cranking
0mm
6
9.5
45
Ø 35
Item
number
248.0K10.050
248.0M41.050
Drilling patterns for hinge cups > see page 3.11
200 Pcs
Cup made of steel, arm made of zinc
Legend of hinge cup symbols
Hinge cup screws
If not pre-mounted
6.9
3.5
15
820.6308.050
2000 Pcs
Screw-on
ready
< screws
Machine
insertion
ready
3.99
04d_lama_spone_miniprimat_R_CS2.3.99 3.99
8/25/10 3:26:01 PM
•
•
•
•
Opening angle
Drilling diameter for hinge cup
Drilling depth
Hinge on plate mounting system
110°
35mm
11,5mm
key-hole
Flat hinge arm allows minimal required gap between
refrigerator and cabinet side.
Depth
adjustment
+4/-0mm
Height
adjustment
+2/-2mm
Side
adjustment
+3/-0mm
Concealed hinges
For further explanation > see pages 3.15 - 3.17
Mounting
details
Mounting plate
drilling distance
min 12
S
21
K
10
D=0
min 15
min 17
L=37
V
7
Drawings show application on
D=0mm thick mounting plate
Mounting plates
Zinc diecast
mounting plates
> see page 3.93
This hinge can be mounted on
all Miniprimat mounting plates
Door clearance
For further explanation > see page 3.8
V
K
16
17
18
19
20
21
22
3
0.3 0.5 0.7 1.0 1.3 1.7 2.5
4
0.3 0.5 0.7 0.9 1.2 1.6 2.1
5
0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Gap Z=0
3.100
04d_lama_spone_miniprimat_R_CS2.3.100 3.100
8/25/10 3:26:03 PM
Cover caps
For hinge arms and glass door hinge cups
For hinge arm
with Glissando
200 Pcs
Made of steel
For Ø 26
glass door cups
· Miniprimat
200 Pcs
Made of plastic
3.101
04d_lama_spone_miniprimat_R_CS2.3.101 3.101
8/25/10 3:26:04 PM
Lama
recommends!
8
32
32
Black
Brass
Chrome
Technical
details
Nickel
plated
Concealed hinges
To improve appearance Lama recommends the
use of hinge arm cover plates with all compatible
concealed hinges.
Plate
type
Material/
surface
Item number
Lama
steel
248.1718. >
050
neutral
steel
248.1712. >
050
rough
245.0652.
>
261 300 390
rough
245.0654.
>
261 300 390
smooth
245.0931.
>
261 300
8
32
Fixing screws and mounting plates
for cups are included
3.102
04d_lama_spone_miniprimat_R_CS2.3.102 3.102
8/25/10 3:26:10 PM
07_titus_storage_solutions_R_CS24.1 4.1
8/25/10 12:52:17 PM
Storage solutions
07_titus_storage_solutions_R_CS24.2 4.2
8/25/10 12:52:17 PM
Drawer solutions
17mm drawer slide
· Runners are paired in one piece moulding
· The guide rail steers the drawer and reduces
jamming risk
· Integral drawer stop and hole plugs
· Manufactured in HDPE to provide a smooth glide
action
17mm
slide pair
192
05179
>
846 886
260
05364
>
886
288
05184
>
846
288
*05201 >
846
Powder
grey
Item number
Neutral
Technical and
mounting details
C-length
C
*American market only
Slide
Stop
One set consists of:
· 2 pcs slides
· 2 pcs stops
from back edge
of drawer
80
for stop setting
32
Ø5x7.5
offset from
groove edge
Ø8x7.5
6
17x6 nominal
groove
size
3
nominal gap
between drawer side
and cabinet side
11
Ø8x7
C
96
192
100 Sets
16
Made of plastic
4.3
07_titus_storage_solutions_R_CS24.3 4.3
8/25/10 12:53:51 PM
Drawer solutions
Drawer front adjuster (DFA)
Multi-direction adjustment
Locking screw to fasten
Independent of drawer system
One piece housing
Storage Solutions
·
·
·
·
Adjustment range
2mm
DFA housing
06308
>
831
06310
>
831
877
*06309
>
831
877
*00033
>
White
Technical and
mounting details
Nickel
Item number
After
Black
Before
Dark brown
2mm
877
11
Ø20
2500 Pcs
Made of plastic
DFA housing
11
847
*American market only
Ø25
*06309 does not include screw
2500 Pcs
Made of zinc, plastic
00900
Runner wheel
>
831 835
877
10
for hole
Ø8
Ø16
20
64
B=B1=32
4000 Pcs
96
Ø8 x 11
Made of plastic
4.4
07_titus_storage_solutions_R_CS24.4 4.4
8/25/10 12:53:53 PM
Wardrobe/Closet
solutions
Soft-open shoe rack
Item number
Black
3 compartments
08053
>
835 877
2 compartments
08055
>
835 877
Technical and
mounting details
Shoe rack
White
· Smooth open-close mechanism
· Wheel runners provide a simple and smooth
operation
· Teeth provide a ratchet action slowing down the
opening and closing
· Webbing design feature protects children from
trapping fingers
27.5
Ø5x16
side panel
192
96
Ø5x16
Ø5x12
door panel
160
128
32
56
We recommend the
using of Panhead
screws No. 600019
96 Pcs
Made of plastic
Pivot and roller
wheel included
4.5
07_titus_storage_solutions_R_CS24.5 4.5
8/25/10 12:53:56 PM
Soho™ solutions
CD storage columns
Clip feature so CDs do not fall out
Mounted vertically or horizontally
Simple mounting
Click on decorative cover caps
Stackable
Storage Solutions
·
·
·
·
·
CD393APP
storage
columns
To suit
B
Ø5x5
128
with pegs
96
To suit
B
96
Silver
8
32
04611
>
835 861
8
16
04473
>
835
8
16
04483
>
15
32
*04238
15
32
04301
>
861
830 835 861
>
835 861
* European market only
Ø5x5
128
Item number
Black
Mounting
details
Clear
No. of CDs
B
Ø5x5
B
16
To suit
100 Pcs
200 Pcs (04611)
84 Pcs (04483)
Made of plastic
End caps
(set)
for 04637
04639
>
835 861
for 04611, 04473
04628
>
835 861
for 04238, 04301
08465
>
835 861
2 pcs in a set
100 Pcs (04639)
200 Pcs (04628)
1000 Pcs (08465)
Made of plastic
4.6
07_titus_storage_solutions_R_CS24.6 4.6
8/25/10 12:54:01 PM
Soho™ solutions
DVD storage columns
DVD/CD
storage
columns
4:4"11
Item number
6
04637
>
835 861
7
04645
>
835 861
Silver
Mounting
details
Black
Clip feature so CDs do not fall out
Mounted vertically or horizontally
Simple mounting
Click on decorative cover caps
Stackable
No. of CDs/DVDs
·
·
·
·
·
SYSAPP
to suit
32
128
16
100 Pcs
Made of plastic
DVD/CD
corner storage
columns
52
To suit
36
52
96 162
36
52
52
Overall height is 162 mm,
Repeat module is 160 mm.
140 Pcs
Made of plastic
End caps > see page 6.6
4.7
07_titus_storage_solutions_R_CS24.7 4.7
8/25/10 12:54:03 PM
Soho™ solutions
Media storage racks
Mounting
details
CD media
storage racks
Item number
Silver
B
No. of CDs
A
Storage Solutions
Fix using screws or adhesive pads
Back to back fixing feature
Fold flat options provide packaging solutions
DVD and/or CD storage versions available
Black
·
·
·
·
fold flat
10
96
133
04229
>
835 861
fold flat
20
128
133
04304
>
835 861
DVD
16
128
201
04488
>
835 861
A
A
To suit
23
37
B
96
100 Pcs (04229)
50 Pcs (04304)
40 Pcs (04488)
Made of plastic
4.8
07_titus_storage_solutions_R_CS24.8 4.8
8/25/10 12:54:07 PM
Soho™ solutions
Media storage grills
· DVD and/or CD storage versions available
· Suitable for various mounting applications
· Products can be stacked to increase storage
capacity
· Backstop available for maximum design flexibility
CD/DVD
storage grills
for CDs
17
133
04435
>
829 835 861
Silver
9
Black
Item number
Tangerine
tint
Mounting
details
Width
B
B
Nr. of
CD/DVDs
A
64
64
16
A
100 Pcs
Made of plastic
4.9
07_titus_storage_solutions_R_CS24.9 4.9
8/25/10 12:54:09 PM
Soho™ solutions
Media storage trays
Storage Solutions
· Spring retainers secure and eject CDs
· Horizontal shelf-mounting with 3 screws
· Free-standing vertical panel attachment - mounted
with Quickfit 6408
· Simple conversion of cabinet, shelf or drawer to CD
storage
CD storage
tray
25
04478
>
835 861
12
04485
>
835 861
Silver
Item number
Black
Mounting
details
Nr. of CDs
B
150
To suit
24
64
64
64
64
Drilling for 04478 (25 CDs)
150
To suit
24
96
Drilling for 04485 (12 CDs)
60 Pcs (04478)
84 Pcs (04485)
Made of plastic
4.10
07_titus_storage_solutions_R_CS24.10 4.10
8/25/10 12:54:11 PM
Soho™ solutions
Modular swivel
· Designed to clip together to suit panels for
wide-screen TVs
· Kit design gives packaging benefits
· Smooth and quiet operation
· Slim design for discrete fitting
Item number
Black
B
06042
>
835
650
06052
>
835
500
06054
>
835
800
06051
>
835
Mounting
details
Modular media
turntable
120 min.
Ø5x10
Ø5 x 10
400 Pcs
120 min.
Made of plastic
Modular media
turntable
B min
Ø5 x 10
500 min
to
suit
50 Pcs
500 Pcs (06054)
Made of plastic
4.11
07_titus_storage_solutions_R_CS24.11 4.11
8/25/10 12:54:13 PM
Soho™ solutions
Turntable
280 min
Media
turntable
05880
>
835 861
05876
>
835 861
05874
>
05877
>
Zinc
Item number
Silver
Mounting
details
Storage Solutions
Weight limit 80kg-100 kg
Smooth and quiet operation
Slim design for discrete fitting
Optional swivel stops to set rotational limits
Optional slimline tray can be used in a freestanding application
Black
·
·
·
·
·
Ø5x12
Ø10 x 12
150 Pcs
280 min
Made of plastic
Turntable tray
100 Pcs
Made of plastic
Axle bolt
885
use insert 02172
500 Pcs
Made of zinc, plastic
Glide stopper
Ø 5x8
32
835
Min. 2 pcs required
Made of plastic
Inserts
Made of plastic
> see page 1.60
4.12
07_titus_storage_solutions_R_CS24.12 4.12
8/25/10 12:54:16 PM
Soho™ solutions
Rotating organiser
Quarter turn
desk organiser
Item number
04644
835 861
>
Silver
Mounting
details
Black
· Smooth rotation between open and closed position
· Mounts anywhere, easy installation
· Click feature provides a stop in closed and fully open
positions
· Half round or quarter storage versions
Ø3 x 15
37
32
112 Pcs
Made of plastic
*04490
Half turn
desk organiser
>
835 861
* European market only
Ø3 x 15
37
32
30 Pcs
Made of plastic
4.13
07_titus_storage_solutions_R_CS24.13 4.13
8/25/10 12:54:20 PM
Storage Solutions
4.14
07_titus_storage_solutions_R_CS24.14 4.14
8/25/10 12:54:23 PM
08_Other_functional_fittings_R_C5.1 5.1
8/25/10 1:03:47 PM
Other functional fittings
08_Other_functional_fittings_R_C5.2 5.2
8/25/10 1:03:48 PM
Rivet fix
Item number
Black
D
Drilling
depth
Technical and
mounting details
A
Drilling
diameter
Adjustable cabinet
leg range
Leg top fixes
regular
15
12.5
02560
>
835
heavy duty
15
12.5
02630
>
835
10
12.5
02558
>
835
02559
>
835
24
ØA x D
34 x 34
200 Pcs
Made of plastic
Socket fix
(knock in)
24
ØA x D
34 x 34
200 Pcs
Made of plastic
Socket fix
(screw on)
24
34 x 34
200 Pcs
Made of plastic
5.3
08_Other_functional_fittings_R_C5.3 5.3
8/25/10 1:05:23 PM
Leg top
Other functional fittings
6
64 x 64
02575
>
835
(4 dowels + lip) dowel/lip
10
12.5
64 x 64
02582
>
835
(4 screws + lip) screw/lip
3
6
64 x 64
02579
>
835
10/3
12.5/6 64 x 64
*02669 >
835
3
6
64 x 64
*02671 >
835
10
12.5
64 x 64
*02672 >
835
2 dowels/2 screws
screw on
B1
21
dowels
ØA x D
100 Pcs
Item number
3
(4 screws) screw on
32
B1
Black
Technical and
mounting details
D
Drilling
distance
Drilling
diameter
A
Drilling
depth
· Lip provides additional support to end panel and
gives extra strength
· The side fix has twin dowel mounting for positive
location
· Rivet fix design gives quick fastening of socket
· Choice of dowel or screw on sockets
· Invert second clip for corner plinth fixing
* Asian market only
When using leg top, you must use
foot with 01373 clip > see page 7.6
38.5
Made of plastic
Rivet
fix/skid
02663
>
835
32
Ø15 x 12.5
32
200 Pcs
Made of plastic
*02642 >
Rivet
fix/ no rivet
835
* Asian market only
32
32
200 Pcs
Made of plastic
5.4
08_Other_functional_fittings_R_C5.4 5.4
8/25/10 1:05:31 PM
Adjustable cabinet
leg range
Adjustable leg,
extension and foot
Adjustable
leg
Item number
Black
H
Fitting height
adjustment
Technical and
mounting details
B1
Drilling
distance
· Legs are supplied assembled at a pre-set height
· Wide adjustment range to fit all common plinth
heights
· Jacking point adjustment feature
· Simple push on design to sockets
24
60-90
02570
>
835
24
92-152
02549
>
835
24
92.5-150
02666
>
835
24
92-150
*02648 >
835
24
125-185
*02653 >
835
big foot
38
92-150
*02699 >
835
big foot
38
125-185
*02706 >
835
big foot
38
110-170
*02645 >
835
H
B1
* Asian market only
100 Pcs (02570)
200 Pcs
Made of plastic
Leg extension
02571
>
835
02569
>
835
50
Ø48
200 Pcs
Made of plastic
Fixed foot
*02574 >
Ø76
835
* American market only
19
200 Pcs
Made of plastic
5.5
08_Other_functional_fittings_R_C5.5 5.5
8/25/10 1:05:43 PM
Adjustable cabinet leg
range
Plinth clips and fox clip
Technical and
mounting details
Fox clip
Item number
Natural
01373
>
846
02578
>
Other functional fittings
· Spring design eliminates the need for drilling and fits
into any position on plinth
· The screw in version can sit in variable plinth positions
· When taking plinth around the corner, the fitting is
reversible.
4
1000 Pcs
Made of plastic
Plinth clip 38
screw
32
*02710 >
835
835
* Asian market only
500 Pcs
38.5
Made of plastic
Plinth clip 24
knock on
02523
>
02634
>
835
32
7
4
24
600 Pcs
Made of plastic
Plinth clip 24
screw on
835
32
24
600 Pcs
Made of plastic
5.6
08_Other_functional_fittings_R_C5.6 5.6
8/25/10 1:05:56 PM
Hinge solutions
Glass door hinge
Technical and
mounting details
Glass door
hinge set
Item number
Black
· Hinge, grub screws and mountings are supplied as
a kit
· One piece moulding
· The closed end on the hinge provides a foolproof
location of hinge to edge of glass
· All plastic design is safer in contact with glass
04266
835
>
One set consists of:
· 2 pcs hinge assembly
· 1 pcs handle plate
10
· 1 pcs pad for handle
· 2 pcs hinge adhesive pad
Other colours on request
Hinge assembly
8.5 (min)
Ø9x7
Handle plate
for magnetic catch
Pad for handle
x
x - 10 mm
x = internal height
Hinge adhesive pad
250 Pcs
Made of plastic
5.7
08_Other_functional_fittings_R_C5.7 5.7
8/25/10 1:06:02 PM
Hinge solutions
Hold-shut glass door
hinge
Set for
3-4 mm glass
04452
835 861
>
SIlver
Item number
Black
Technical and
mounting details
Other functional fittings
· Hold feature keeps door in closed position
· The grub screws have flange to prevent
overscrewing resulting in an accurate fit every time
· No requirement for an adhesive pad
· Kit of parts is ordered as a single part number
One set consists of:
· 1 pcs handle and door stop
· 2 pcs hold shut GDH set
· 1 pcs hold shut accessory set
Other colours on request
Ø9 x 9
Handle and
door stop
Ø9 x 9
Ø5 x 10.5
Ø5 x 10.5
Hold shut GDH set
x
x - 10 mm
x = internal height
Hold shut
accessory set
250 Pcs
Made of plastic
5.8
08_Other_functional_fittings_R_C5.8 5.8
8/25/10 1:06:08 PM
Shelf supports
Without
pin
(rock-in)
Item number
336.3553.
>
Zinc
Technical and
mounting details
Nickel plated
· Shelf supports are made of zinc, steel or plastic
· Teeth on mounting pin prevent rotation and fallout of the fitting
· Screw-on and glass shelf versions are available
650
15
014952
14
6
170
>
Ø5
12
1000 Pcs (336.3553.)
Made of zinc
4000 Pcs (014952)
*01851 >
Structural
shelf support
Ø10
847 885
* American market only
15
Ø5
14.5
9
14
4
7.5
3000 Pcs
Made of zinc
014953
2 pins
(rock-in)
6
3000 Pcs
170
>
10
Ø5
Made of zinc
336.3174.
Pin Ø5x8
(rock-in)
20
>
650
15
Ø5
8
19
8
6
Ø5
12
8.5
1000 Pcs
Made of zinc
5.9
08_Other_functional_fittings_R_C5.9 5.9
8/25/10 1:06:11 PM
Shelf supports
Other functional fittings
· Hold down feature traps the shelf in place for
security
· Folding design allows the shelf to be post mounted
in an assembled cabinet
· To suit a wide range of shelf thicknesses
· Pad for metal shelf support when using glass
8
Shelf support
(push-in)
01825
>
847 885
01852
>
847
01822
>
15
01837
>
16
01838
>
877
19
01843
>
877
16
*01828 >
877
19
*01829 >
877
Silver
White
Zinc
Item number
Nickel
Technical and
mounting details
Black
B
6.5
Ø5 x 8.5
11.5
12.5
1.5
32
Ø5 x 8.5
2000 Pcs
Made of zinc
Shelf support
(push-in)
Ø5
10
10
7
7.5
5.5
14
Ø5
Ø5
5.5
7.5
2000 Pcs
Made of zinc
Shelf
holddown
(for use with
01825)
16.3
861
12.8
24
7
32
19
7000 Pcs
Made of plastic
Shelf support
retainer
B
42
835
877
Ø5 x 8.5
12
32
B
4000 Pcs
Made of plastic
* American market only
Other colours on request
5.10
08_Other_functional_fittings_R_C5.10 5.10
8/25/10 1:06:15 PM
Shelf supports
Item number
338.3687.
Pin Ø5x10
(screw-on)
>
Nickel
plated
Technical and
mounting details
Zinc plated
blue
Mounting procedure:
650
12
15.7
17
1000 Pcs
8
Made of zinc
For glass
shelves
(rock-in)
338.9721. >
860
338.3686.
650
Ø 12
15
9.5
8
15
1000 Pcs
7.8
Made of zinc and plastic
Pin Ø5x10
(rock-in)
>
12
15.7
17
1000 Pcs
8
Made of zinc
5.11
08_Other_functional_fittings_R_C5.11 5.11
8/25/10 1:06:20 PM
Pin
334.6073.
>
040 050
335.6076.
>
040
Antique
brass plated
Item number
Nickel
plated
Technical and
mounting details
Zinc plated
blue
Other functional fittings
Shelf supports
7.5
Ø4.8
Ø4.8
Ø5
7.5
8.5
5000 Pcs
Made of steel
Pin
Ø4.8
080
Ø5
24
8.5
5000 Pcs
Made of steel
5.12
08_Other_functional_fittings_R_C5.12 5.12
8/25/10 1:06:24 PM
Connection with
M4 screws
Connecting screws
Technical
details
Item number
Connecting
screw
Ø9.5
17
830.6215.
>
040
20
830.6216.
>
040
22
830.6217.
>
040
25
830.6218.
>
040
28
830.6219.
>
040
38
830.6261.
>
040
30
830.6273.
>
040
32
830.6274.
>
040
35
830.6292.
>
040
40
830.6275.
>
040
42
830.6276.
>
040
10
13
270.6531.
>
050
12
15
270.6532.
>
050
15
27
270.6533.
>
050
M4
L
10000 Pcs
Nickel plated
L
Zinc plated blue
A
Made of steel
Sleeve
with
head
A
Ø10
M4 Ø5
L
5000 Pcs
Made of steel
5.13
08_Other_functional_fittings_R_C5.13 5.13
8/25/10 1:06:26 PM
No-tools Backfix and
Trimfix™
Hardboard
Backfix
>
885 897
01370
>
Other functional fittings
Zinc plated
02154
Phosphate
Item number
Zinc
Technical and
mounting details
Corrosil
· Push Backfix into panel
· No tools required to lock the Backfix panels
together
· The handle on Backfix acts as a stop during
locking, providing greater accuracy and speed of
insertion
· Barbs on the Backfix provide a quality fastener for
rigid cabinet construction
3 / 3.5
Ø12 x 10
6
9 min
1000 Pcs
Made of zinc
Trimfix™
852 833
Trim
4/4.4
Ø3 min
10
5
2000 Pcs
Made of various material
*01709
Screw panhead
No 8 x 17.6
15000 Pcs
>
883
Made of zinc
5.14
08_Other_functional_fittings_R_C5.14 5.14
8/25/10 1:06:27 PM
Glass clip
Rear wall connectors
Drawing shows glass clips
mounting example.
Glass
clip
Ø 3.6
11
L
16.5
24
25000 Pcs
Rear wall
connector
long
Antique brass
plated
Transparent
Item number
3.3
359.4201.
>
340 370
6
359.4302.
>
340
9.5
359.4223.
>
340 370
Nickel
plated
Pin length
Technical and
mounting details
Zinc plated
L
6
Made of plastic
011608
max.5
04801
3.7
>
>
170
847 883
Ø10
7 14
15
9
15
28
37
1000 Pcs
Made of zinc
016554
Rear wall
connector
short
>
170
max.5
6.5
3.5
Ø10
15
16.5
18
15
Made of zinc
Rear
wall
connector
7.5
04.2658.001.>
002
10
7.5
500 Pcs
04.2658.001.> 001
20
10
1000 Pcs
Made of zinc
5.15
08_Other_functional_fittings_R_C5.15 5.15
8/25/10 1:06:31 PM
Panel brackets
90° Bracket
(screw-in/rock-in peg)
10
02111
>
847 885
02110
>
885
02133
>
885
Zinc
Item number
Nickel plated
Technical and
mounting details
Other functional fittings
· To be used to fix face frames to carcases without
additional drilling to cabinet
· Designed for carcase side panel of 18mm thickness
· Edge to hole centre = 28mm
· Easier fixing of frames due to parts that remain in
holes once inserted
15
10
Ø5
8
17
12
Ø5
9
12
1000 Pcs
Made of zinc
90° Bracket
(screw-in)
16
12 4
12
5
7
11
1000 Pcs
11
15
Made of zinc
Corner bracket
(rock-in)
8
12
6
Ø5
12
6
9
Ø5
12
1000 Pcs
9
9
Made of zinc
5.16
08_Other_functional_fittings_R_C5.16 5.16
8/25/10 1:06:42 PM
Item number
339.7047.
Rail
>
Nickel plated
Technical and
mounting details
Chrome plated
Wardrobe rail
Rail supports
060
Standard length 3m
30
0.6
Standard length is 3m.
15
Other lengths available upon
special request > see page 0.3
10 Pcs
Made of chrome plated steel
Rail support
3-holes
015130
>
170
015129
>
170
015128
>
3
32 43.5
10
6
13
1000 Pcs
Made of zinc
Rail support
2-pins
3
Ø5
6
32 43.5
10
6
13
800 Pcs
Made of zinc
Rail support M6
10.5
M6
6
350 Pcs
Made of zinc
170
42 63.5
17
5.17
08_Other_functional_fittings_R_C5.17 5.17
8/25/10 1:06:49 PM
Rail
339.7044
>
339.7041
>
Nickel
plated
Brown
Item number
White
Technical
details
Chrome
plated
Other functional fittings
Wardrobe rail
Ø18
350 370
060
18
0.7
Standard length is 3m.
Other lengths available upon
special request > see page 0.3
10 Pcs
Made of steel, chrome plated or plastic coating
Screw-on
337.4059.
>
337.1398.
>
350 370
32
19
50
Ø4
13
2000 Pcs
Made of plastic
Screw-on
under a shelf
8.5
22
050
M6
21.5
Ø5.2
32
64.5
M6 screw supplied separately:
16
815.6354. 040
250 Pcs
Made of steel
1000 Pcs
5.18
08_Other_functional_fittings_R_C5.18 5.18
8/25/10 1:06:57 PM
6.1
09_company_profile_OK_R_CS2.indd6.1 6.1
8/25/10 12:11:51 PM
TitusPlus
The Titus Group profile
6.2
09_company_profile_OK_R_CS2.indd6.2 6.2
8/25/10 12:11:51 PM
Profile
Vision
Functional hardware
will amount to an ever
increasing proportion of
total furniture value.
Mission
Furniture fittings for
purpose
We will provide our
customers with products
and services that
improve productivity and
quality while reducing
manufacturing and
assembly costs.
Philosophies and
Principles
Gain total knowledge of
our markets
Create market
segmentation to maximise
margins
Our business' profitability
depends on volume
manufacturing
Communicate our
business mission
Maintain global brand
consistency
Build our business on long
term relationships
Our philosophies and
principles maximise
financial returns to our
shareholders
By innovative design and good service
we enable our business partners to
improve productivity and quality while
reducing manufacturing and
assembly costs.
TitusPlus
We believe in joint design and creativity.
With our efficiency and quality products
we are your reliable partner.
Innovation
Furniture
user
Furniture producer
6.3
09_company_profile_OK_R_CS2.indd6.3 6.3
8/25/10 12:13:08 PM
Brand and Product strategy
Furniture
OEM Hardware
Auto-motive
Electric industry
Metal processing
Die casting
Fittings for purpose
Furniture Hardware
Brand: Lama
· Lama dampers
Brands:
· Window fittings
Brand: Lama Automation
· Titus
· Lama
· Tools
· Lama-Glissando
· LamaCaster four-slide
die casting machines
· Huwil
Hidden
mechanical
connectors
· Automotive components
· Automated assembly
machines
· Titusonic
Ultrasound
fastening
technology
Concealed
hinges
and hinge
accessories
Dampers
Automation &
technologies
Glass fittings
Special fittings
6.4
09_company_profile_OK_R_CS2.indd6.4 6.4
8/25/10 12:13:09 PM
Innovation
Continuous improvement
in products and processes
Product and solutions
innovations from
Titus+Lama+Huwil offer
clearly recognisable
customer benefits and meet
requirements for quality,
reliability and precision high
volume manufacturing.
We design innovative
door hardware that opens,
swings and closes softly,
the world's most advanced
range of mechanical
furniture connectors.
These include the
revolutionary Titusonic
WoodWelding technology,
and unique automated
process solutions for a wide
range of industries under the
Lama Automation brand.
Titus+Lama+Huwil research
centres can meet the needs
of our customers for rapid
development of exclusive new
hardware features which enhance
their furniture and for solutions
that improve their productivity.
6.5
09_company_profile_OK_R_CS2.indd6.5 6.5
8/25/10 12:13:10 PM
Fully integrated manufacturing
Full control of key component design and manufacturing
All technologies at one location
In-house production of manufacturing machinery and tools
All key manufacturing phases
at one location
All the main technologies required
for high volume production of
furniture hardware and othe
components are available in-house.
Lama Automation division
designs and manufactures
die casting machinery,
assembly systems
and tools
Lama damper
Die casting
Stamping
Fully integrated
manufacturing
concept applied
to Lama damper
Lama Caster
Fast and flexible four-slide zinc
die casting machine
· fast cycling
· highly flexible
· low cost tooling
· optimal raw material usage
Designed by TitusPlus
hardware R&D team
Moulding
In-house designed
manufacturing technology
Forging
Lama CombiCaster
High speed four-slide zinc die casting
machine for insert casting
· combined zinc/steel products
· multi-cavity fast cycling
· excellent part quality
Manufactured on proprietary
assembly process designed and
produced by Lama Automation
Heat treatment
Surface treatment
Design and production
of die casting, plastic injection
and press tools
· Complete range of services,
from design to tool manufacture
· High precision
· Long life expectancy
· High productivity
Built into Lama Glissando
hinge soft-closing solutions
Automated 100% quality check
Assembly
Testing laboratory
Design and manufacture of
automated assembly machines for
· metal processing industry
· electrical industry
· automotive industry
· industry of medical devices
Custom solutions for various
furniture and other applications
6.6
09_company_profile_OK_R_CS2.indd6.6 6.6
8/25/10 12:13:18 PM
Quality
We believe that the
Titus+Lama+Huwil
Mission is achieved most
effectively through the
management of our design,
manufacturing and service
activities in conformance with
the internationally recognised
ISO 9001:2000 standard for
quality management.
Quality has a broad meaning
for us: it is our guide to the
selection of materials, work,
processes, internal relations
and cooperation with
partners.
Environment
Our policy is to ensure that all our
activities conform to an environmental
management system within the
guidelines of International Standard
ISO 14001. Measures to prevent or
minimise the impacts our activities may
have on the environment are integrated
within all Titus+Lama+Huwil business
functions.
Working within the framework of our
environmental policy we aim for:
- inclusion of the best available
technologies in the production process
- minimising the use of space, natural
resources, energy and emissions
- waste management
6.7
09_company_profile_OK_R_CS2.indd6.7 6.7
8/25/10 12:14:05 PM
09_company_profile_OK_R_CS2.indd6.8 6.8
8/25/10 12:14:09 PM
Global player
Worldwide design, manufacturing
and distribution capabilities
TitusPlus d.o.o.
Europa
TitusPlus d.o.o.
Dekani 5
SI-6271 Dekani
Slovenia
+386 5 66 90 213
+386 5 66 90 205
Lama d.d. Dekani
Dekani 5
SI-6271 Dekani
Slovenia
+386 5 66 90 213
+386 5 66 90 205
HUWIL-Werke GmbH
Brölstrasse 2
D-53809 Ruppichteroth
Germany
+49 2295 7 0
+49 2295 7 200 Fax
Titus GmbH
Brölstrasse 2
D-53809 Ruppichteroth
Germany
+49 2295 7 0
+49 2295 7 200 Fax
Titus Tool Company Ltd.
10 Blackburn Industrial Estate
Enterprise Way
Sherburn in Elmet
LS25 6NA
United Kingdom
+44 1977 682 582
+44 1977 680 481 Fax
Asien
Titus Polska Sp. z o.o.
ul. Stefańskiego 17 A
PL-62-002 Suchy Las/Poznań
Poland
+48 61 811 5402 Phone/Fax
+48 61 811 5684 Phone/Fax
+48 61 821 9362
CRO-Lama
Rakitska 10a
Rakitje
HR-10437 Bestovje
Croatia
+385 1 3323 033
+385 1 3323 233 Fax
Titus Tool Co. Pte. Ltd.
1 Liang Seah Street
#02-13 Liang Seah Place
Singapore 189022
+65 6383 3922
+65 6383 3178 Fax
Titus Furniture Fitting
Trading Shenzen Ltd
#6 Turbo Logistics Center
4th floor Room 406
Shihua Road
Futian Free Trade Zone
Shenzen
China
Pc 518038
+867 558 348 0916 Phone/Faxx
Amerika
Titus Tool Co. Inc.
800 5th Avenue
Suite 4100
Seattle, WA 98104
USA
800 762 1616 toll free
+1 253 872 2829
+1 253 872 2827 Fax
Hauptsitz
Titus International Ltd
10 Brook Business Centre
Cowley Mill Road
Uxbridge, Middlesex
UB8 2FX
United Kingdom
+44 1895 203 730
+44 1895 252 793 Fax
A comprehensive list of our distributors is accessible through www.titusplus.com
info@titusplus.com
www.titusplus.com
6.9
09_company_profile_OK_R_CS2.indd6.9 6.9
8/25/10 12:14:09 PM
6.10
09_company_profile_OK_R_CS2.indd6.10 6.10
8/25/10 12:14:10 PM
Index
Item number
Page
Item number
Page
Item number
Page
Item number
Page
00021-885
00022-885
00033-847
00062-852
00068-852
00071-852
00077-852
00171-852
00172-852
00180-885
00900-831
00900-835
00900-877
01020-877
01029-834
01029-835
01029-867
01029-882
01042-835
01042-877
01056-835
01056-877
011608-170
01370-833
01370-852
01373-846
014952-170
014953-170
015128-170
015129-170
015130-170
016554-170
01709-883
01732-806
01732-877
01822-861
01825-847
01825-885
01828-877
01829-877
01837-835
01837-877
01838-877
01843-877
01851-847
01851-885
01852-847
02046-835
02046-877
02075-831
02075-867
02075-877
02077-875
02077-877
02101-834
02107-831
02107-835
02107-861
02107-877
02110-885
02111-847
02111-885
02120-831
02120-835
02120-861
02120-877
02130-835
02130-877
02133-885
02139-835
02139-877
02141-835
1.19
1.19
4.4
1.9
1.9
1.9
1.9
1.9
1.9
1.8
4.4
4.4
4.4
1.9
1.58
1.58
1.58
1.58
1.9
1.9
1.9
1.9
5.15
5.14
5.14
5.6
5.9
5.9
5.17
5.17
5.17
5.15
1.12, 5.14
1.12
1.12
5.10
5.10
5.10
5.10
5.10
5.10
5.10
5.10
5.10
5.9
5.9
5.10
1.12
1.12
1.13
1.13
1.13
1.13
1.13
1.20
1.20
1.20
1.20
1.20
5.16
5.16
5.16
1.20
1.20
1.20
1.20
1.20
1.20
5.16
1.20
1.20
1.20
02141-861
02141-877
02144-835
02144-877
02154-885
02154-897
02161-806
02161-861
02161-877
02164-835
02172-846
02182-846
02190-835
02193-835
02193-877
02523-835
02549-835
02558-835
02559-835
02560-835
02569-835
02570-835
02571-835
02574-835
02575-835
02578-835
02579-835
02582-835
02630-835
02634-835
02642-835
02645-835
02648-835
02653-835
02663-835
02666-835
02669-835
02671-835
02672-835
02699-835
02706-835
02710-835
02985-877
03090-883
03118-831
03121-831
03150-831
03150-877
03168-883
03180-881
03181-881
03190-883
04229-835
04229-861
04238-830
04238-835
04238-861
04266-835
04301-835
04301-861
04304-835
04304-861
04435-829
04435-835
04435-861
04452-835
04452-861
04473-835
04478-835
04478-861
04483-861
04485-835
1.20
1.20
1.20
1.20
5.14
5.14
1.19
1.19
1.19
1.19
1.60
1.60
1.19
1.19
1.19
5.6
5.5
5.3
5.3
5.3
5.5
5.5
5.5
5.5
5.4
5.6
5.4
5.4
5.3
5.6
5.4
5.5
5.5
5.5
5.4
5.5
5.4
5.4
5.4
5.5
5.5
5.6
1.12
1.16
1.16
1.16
1.16
1.16
1.16
1.16
1.16
1.16
4.8
4.8
4.6
4.6
4.6
5.7
4.6
4.6
4.8
4.8
4.9
4.9
4.9
5.8
5.8
4.6
4.10
4.10
4.6
4.10
04485-861
04488-835
04488-861
04490-835
04490-861
04611-835
04611-861
04628-835
04628-861
04637-835
04637-861
04639-835
04639-861
04644-835
04644-861
04645-835
04645-861
04801-847
04801-883
05090-885
05091-885
05179-846
05179-886
05184-846
05201-846
05364-886
05395-871
05409-885
05410-885
05414-835
05441-880
05453-880
05474-880
05503-880
05552-880
05554-880
05556-880
05563-880
05570-880
05570-882
05572-882
05574-838
05574-847
05574-885
05574-897
05575-838
05575-847
05575-885
05575-897
05576-885
05578-885
05579-885
05580-885
05581-885
05586-847
05586-883
05586-885
05592-883
05608-885
05609-885
05610-885
05611-885
05652-847
05652-883
05652-885
05657-847
05657-883
05657-885
05658-847
05658-883
05658-885
05659-847
4.10
4.8
4.8
4.13
4.13
4.6
4.6
4.6
4.6
4.7
4.7
4.6
4.6
4.13
4.13
4.7
4.7
5.15
5.15
1.34
1.34
4.3
4.3
4.3
4.3
4.3
1.28
1.54
1.54
1.30
1.28
1.28
1.28
1.28
1.29
1.29
1.29
1.29
1.29
1.29
1.29
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.38
1.37
1.37
1.37
1.32
1.34
1.34
1.34
1.34
1.37
1.37
1.37
1.37
1.37
1.37
1.37
1.37
1.37
1.37
05659-883
05659-885
05675-847
05675-883
05675-885
05676-847
05676-883
05676-885
05677-847
05677-883
05677-885
05678-847
05678-883
05678-885
05679-847
05679-883
05679-885
05685-880
05714-880
05751-883
05752-883
05753-883
05757-885
05772-883
05774-883
05775-883
05778-883
05786-885
05787-885
05810-882
05857-883
05858-883
05859-883
05860-883
05874-885
05876-835
05876-861
05877-835
05880-835
05880-861
05917-885
05929-885
05960-885
05971-883
06042-835
06051-835
06052-835
06054-835
06073-867
06073-877
06074-852
06077-852
06080-852
06308-831
06308-877
06309-831
06309-877
06310-831
06310-877
06381-861
06381-877
06383-861
06383-877
06385-861
06385-877
06387-861
06387-877
06401-885
06402-883
06402-885
06403-885
06405-883
1.37
1.37
1.37
1.37
1.37
1.37
1.37
1.37
1.37
1.37
1.37
1.37
1.37
1.37
1.37
1.37
1.37
1.29
1.29
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.32
1.34
1.34
1.29
1.32
1.32
1.32
1.33
4.12
4.12
4.12
4.12
4.12
4.12
1.57
1.32
1.57
1.57
4.11
4.11
4.11
4.11
1.13
1.13
1.9
1.9
1.9
4.4
4.4
4.4
4.4
4.4
4.4
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.44
1.44
1.44
1.44
1.44
6.11
09_company_profile_OK_R_CS2.indd6.11 6.11
8/25/10 12:14:10 PM
Item number
Page
Item number
Page
Item number
Page
Item number
Page
06406-883
06406-885
06408-880
06410-882
06411-885
06412-885
06413-885
06414-885
06415-885
06416-885
06431-831
06431-861
06431-877
06433-831
06433-861
06433-877
06435-831
06435-861
06435-877
06437-831
06437-861
06437-877
06439-831
06439-835
06439-877
06441-831
06441-835
06441-877
06443-831
06443-835
06443-877
06445-831
06445-835
06445-877
06447-847
06449-847
06451-847
06453-847
06455-847
06457-847
06459-847
06461-847
06464-861
06465-831
06465-835
06465-861
06465-877
06470-877
06471-831
06471-835
06471-861
06471-877
06472-831
06472-835
06472-861
06472-877
06473-831
06473-835
06473-861
06473-877
06477-835
06479-880
06495-883
06803-831
06803-835
06803-877
06806-831
06806-835
06806-877
06813-831
06813-835
06813-877
1.44
1.44
1.43
1.43
1.46
1.46
1.45
1.45
1.46
1.45
1.47
1.47
1.47
1.47
1.47
1.47
1.47
1.47
1.47
1.47
1.47
1.47
1.48
1.48
1.48
1.48
1.48
1.48
1.48
1.48
1.48
1.48
1.48
1.48
1.47
1.47
1.47
1.47
1.48
1.48
1.48
1.48
1.49
1.49
1.49
1.49
1.49
1.49
1.49
1.49
1.49
1.49
1.49
1.49
1.49
1.49
1.49
1.49
1.49
1.49
1.43
1.43
1.44
1.18
1.18
1.18
1.18
1.18
1.18
1.18
1.18
1.18
06839-831
06839-835
06839-877
06947-847
06949-847
06951-847
06953-847
08053-835
08053-877
08055-835
08055-877
08465-835
08465-861
09406-885
09406-897
09422-885
09423-885
09424-885
09431-886
09435-885
09443-885
09456-885
09490-885
09490-897
09491-885
09491-897
09492-885
09492-897
09495-885
09495-897
09499-885
09499-897
09583-885
09588-885
09592-885
09594-885
09597-883
09890-835
09891-835
09892-835
04.2658.001
240.7078.350
240.7078.380
240.7079.350
240.7079.380
240.7080.350
240.7080.380
240.7081.380
241.0043.650
241.0050.650
241.0074.650
243.0002.050
243.0B35.050
243.0B36.050
243.0B37.050
243.0B38.050
243.0B39.050
243.0B40.050
243.0B51.050
243.0E06.050
243.0E07.050
243.0E08.050
243.0F92.050
243.0K69.050
243.0K70.050
243.0K71.050
243.0L88.050
243.0L89.050
243.0L90.050
243.0M42.050
243.0M64.050
243.0M65.050
1.18
1.18
1.18
1.52
1.51
1.52
1.51
4.5
4.5
4.5
4.5
4.6
4.6
1.36
1.36
1.31
1.31
1.31
1.39
1.31
1.31
1.31
1.35
1.35
1.36
1.36
1.35
1.35
1.35
1.35
1.35
1.35
1.31
1.31
1.31
1.31
1.31
2.19
2.19
2.19
5.15
2.17
2.17
2.18
2.18
2.18
2.18
2.18
3.97
3.97
3.97
3.85
3.81
3.81
3.83
3.81
3.81
3.83
3.87
3.81
3.81
3.83
3.83
3.83
3.83
3.83
3.81
3.81
3.83
3.83
3.81
3.81
243.0P42.050
243.0S97.050
243.0U26.050
243.0Z11.050
243.0Z84.050
244.0022.650
244.0036.650
244.0062.650
244.0063.650
244.0067.650
244.0068.650
244.0085.650
244.0095.650
244.0104.050
244.0118.050
244.0119.050
244.0120.050
244.0134.050
244.0135.050
244.0136.050
244.0137.050
244.0166.050
244.0167.050
244.0175.650
244.0232.650
244.0307.050
244.0561.050
244.0562.050
244.0565.050
244.0566.050
244.0567.050
244.0568.050
244.0655.050
244.0656.050
244.0845.650
244.0846.050
244.0847.050
244.0848.650
244.0851.650
244.0853.650
244.0866.050
244.0867.050
244.0868.050
244.0869.050
244.0907.650
244.0913.650
244.0914.650
244.0929.050
244.0930.050
244.0963.050
244.0965.050
244.0A49.650
244.0A50.650
244.0B12.650
244.0D46.650
244.0D47.650
244.0D99.650
244.0E02.650
244.0E90.650
244.0G19.050
244.0G21.650
244.0H62.050
244.0H63.050
244.0H64.050
244.0H65.050
244.0H88.650
244.0K95.050
244.0K96.050
244.0K97.650
244.0K98.650
244.0L26.050
244.0L29.050
3.83
3.85
3.87
3.85
3.87
3.94
3.78
3.76
3.76
3.76
3.76
3.52
3.52
3.94
3.52
3.52
3.52
3.52
3.52
3.52
3.52
3.52
3.52
3.76
3.76
3.76
3.52
3.52
3.52
3.52
3.52
3.52
3.94
3.94
3.94
3.94
3.94
3.97
3.94
3.94
3.76
3.76
3.94
3.94
3.97
3.94
3.76
3.76
3.76
3.76
3.76
3.87
3.87
3.76
3.97
3.97
3.97
3.97
3.94
3.76
3.94
3.94
3.94
3.76
3.76
3.94
3.76
3.76
3.76
3.76
3.76
3.76
244.0L37.650
244.0L38.650
244.0L39.050
244.0L40.050
244.0L50.050
244.0L54.050
244.0L55.050
244.0L66.050
244.0L98.050
244.0M14.050
244.0M15.050
244.0M28.650
244.0M29.650
244.0M33.650
244.0P24.050
244.0P25.050
244.0P26.050
244.0P27.050
244.0P29.650
244.0P41.650
244.0P68.050
244.0P69.050
244.0P70.050
244.0P71.050
244.0P72.050
244.0P73.050
244.0P77.050
244.0P78.050
244.0P79.050
244.0R22.050
244.0R23.050
244.0R24.050
244.0S43.050
244.0S44.050
244.0S45.050
244.0S65.050
244.0S66.050
244.0S67.050
244.0S68.050
244.0S92.050
244.0S95.050
244.0S96.050
244.0T14.650
244.0T28.050
244.0T40.050
244.0T55.650
244.0T92.050
244.0U72.050
244.0U78.050
244.0U93.050
244.0U94.050
244.0V19.050
244.0V50.050
244.0V54.050
244.0V64.050
244.0Z26.050
244.0Z51.050
244.0Z63.050
244.0Z64.050
244.1136.050
244.1137.050
244.1138.050
244.1139.050
244.1228.050
244.1229.050
244.1233.050
244.1234.050
244.1638.050
244.1639.050
244.1640.050
244.1642.050
244.1643.050
3.76
3.76
3.76
3.76
3.76
3.94
3.94
3.76
3.76
3.94
3.94
3.76
3.76
3.52
3.76
3.76
3.52
3.52
3.52
3.76
3.52
3.52
3.52
3.52
3.52
3.52
3.52
3.52
3.52
3.52
3.52
3.52
3.52
3.52
3.52
3.76
3.76
3.76
3.76
3.52
3.52
3.52
3.76
3.76
3.76
3.94
3.54
3.94
3.94
3.94
3.94
3.52
3.78
3.94
3.76
3.52
3.52
3.52
3.76
3.52
3.52
3.52
3.52
3.52
3.52
3.52
3.52
3.54
3.54
3.54
3.54
3.54
6.12
09_company_profile_OK_R_CS2.indd6.12 6.12
8/25/10 12:14:10 PM
Item number
Page
Item number
Page
Item number
Page
Item number
Page
244.1644.050
244.1645.050
244.3016.650
244.3651.650
245.0009.850
245.0652.261
245.0652.300
245.0652.390
245.0654.261
245.0654.300
245.0654.390
245.0659.850
245.0660.850
245.0926.850
245.0931.261
245.0931.300
248.0160.050
248.0161.050
248.0162.050
248.0163.050
248.0171.050
248.0172.050
248.0186.050
248.0188.050
248.0255.050
248.0279.050
248.0280.050
248.0283.050
248.0285.050
248.0327.050
248.0328.050
248.0431.050
248.0433.050
248.0482.050
248.0487.050
248.0532.050
248.0533.050
248.0534.050
248.0535.050
248.0536.050
248.0537.050
248.0545.050
248.0547.050
248.0665.050
248.0675.050
248.0742.050
248.0745.050
248.0810.650
248.0G49.050
248.0G50.050
248.0G51.050
248.0G52.050
248.0G53.050
248.0G54.050
248.0G55.050
248.0G56.050
248.0G57.050
248.0G58.050
248.0G79.050
248.0G80.050
248.0G81.050
248.0G82.050
248.0G83.050
248.0K10.050
248.0K40.050
248.0K76.050
248.0L04.050
248.0L27.650
248.0L28.650
248.0L32.050
248.0L33.650
248.0L46.050
3.54
3.52
3.52
3.52
3.91
3.102
3.102
3.102
3.102
3.102
3.102
3.89
3.91
3.89
3.102
3.102
3.69
3.69
3.45
3.45
3.27
3.27
3.27
3.27
3.65
3.27
3.27
3.39
3.39
3.27
3.27
3.37
3.37
3.27
3.27
3.27
3.27
3.27
3.27
3.27
3.27
3.27
3.27
3.35
3.35
3.41
3.41
3.65
3.57
3.57
3.57
3.59
3.65
3.57
3.57
3.57
3.59
3.65
3.57
3.57
3.57
3.59
3.65
3.99
3.57
3.57
3.57
3.61
3.63
3.61
3.63
3.63
248.0L51.050
248.0L61.050
248.0L70.050
248.0L71.050
248.0L72.050
248.0L73.050
248.0M41.050
248.0M73.050
248.0N12.050
248.0N13.050
248.0N16.050
248.0N17.050
248.0N20.050
248.0N21.050
248.0N24.050
248.0N25.050
248.0N38.050
248.0N62.050
248.0P28.650
248.0P43.050
248.0R09.050
248.0R10.050
248.0R12.050
248.0R13.050
248.0R14.050
248.0R17.050
248.0R18.050
248.0S05.050
248.0S06.050
248.0S69.050
248.0T10.050
248.0T13.050
248.0T69.050
248.0T70.050
248.0T71.050
248.0T72.050
248.0T80.050
248.0T81.050
248.0U13.050
248.0U14.050
248.0U16.050
248.0U21.050
248.0U22.050
248.0U84.050
248.0U85.050
248.0U86.050
248.0V08.050
248.0V09.050
248.0V10.050
248.0V14.050
248.0V15.050
248.0V18.050
248.0V39.050
248.0V41.050
248.0V42.050
248.0V45.050
248.0V47.050
248.0V48.050
248.0V56.050
248.0V62.050
248.0V65.050
248.0V66.050
248.0V69.050
248.0V70.050
248.0V71.050
248.0V72.050
248.1712.050
248.1718.050
270.2046.400
270.2047.400
270.6531.050
270.6532.050
3.69
3.41
3.63
3.61
3.59
3.65
3.99
3.45
3.35
3.35
3.37
3.37
3.39
3.39
3.41
3.41
3.61
3.41
3.65
3.69
3.99
3.69
3.69
3.45
3.45
3.45
3.45
3.69
3.69
3.45
3.21
3.21
3.21
3.21
3.21
3.21
3.71
3.71
3.71
3.71
3.47
3.47
3.47
3.25
3.25
3.25
3.25
3.25
3.25
3.29
3.47
3.33
3.29
3.29
3.29
3.33
3.33
3.33
3.21
3.31
3.45
3.65
3.21
3.21
3.21
3.21
3.102
3.102
1.53
1.53
5.13
5.13
270.6533.050
275.0103.040
275.0106.040
275.2030.000
275.2030.040
275.2057.000
275.2057.040
275.2058.040
275.2146.040
275.2146.085
275.2209.040
275.3096.600
275.4034.330
275.4034.370
275.4034.380
275.4034.390
275.4035.200
275.4058.200
276.4036.200
277.4225.330
277.4225.370
277.4225.380
277.4225.390
277.4355.330
277.4355.370
277.4355.380
277.4355.390
278.4129.350
278.4129.370
278.4129.380
279.9187.960
279.9187.970
279.9187.980
279.9465.960
279.9465.970
279.9465.980
334.6073.040
334.6073.050
335.6076.040
335.6076.080
336.3174.650
336.3553.650
337.1398.050
337.4059.350
337.4059.370
338.3686.650
338.3687.650
338.9721.860
339.7041.060
339.7044.350
339.7044.370
339.7047.060
359.4201.340
359.4201.370
359.4223.340
359.4223.370
359.4302.340
385.2166.400
385.2169.400
385.2237.400
385.2252.400
408.3166.600
408.3391.600
408.3423.600
408.3424.600
825.7561.040
827.4013.330
827.4013.350
827.4130.330
827.4130.350
827.6201.040
827.6202.040
5.13
1.56
1.56
1.55
1.55
1.56
1.56
1.56
1.56
1.56
1.55
1.55
1.58
1.58
1.58
1.58
1.60
1.60
1.60
1.58
1.58
1.58
1.58
1.58
1.58
1.58
1.58
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
5.12
5.12
5.11
5.11
5.9
5.9
5.18
5.18
5.18
5.11
5.11
5.11
5.18
5.18
5.18
5.17
5.15
5.15
5.15
5.15
5.15
1.53
1.53
1.53
1.53
1.59
1.59
1.59
1.59
1.22
1.10
1.10
1.10
1.10
1.10
1.10
830.6215.040
830.6216.040
830.6217.040
830.6218.040
830.6219.040
830.6261.040
830.6273.040
830.6274.040
830.6275.040
830.6276.040
830.6292.040
915.0007.050
915.0Z85.050
915.0Z96.050
915.7102.380
915.7105.050
915.7109.050
915.7110.380
926.0A26.050
926.0A27.050
940.0U90.650
940.0U91.650
940.0V67.650
940.0V68.650
950.0T26.050
950.0T27.050
951.0V93.650
951.0V94.650
951.0V99.650
951.0X05.050
951.0Z44.650
951.0Z50.650
951.0Z88.650
951.0Z90.050
5.13
5.13
5.13
5.13
5.13
5.13
5.13
5.13
5.13
5.13
5.13
3.23
3.23
3.23
3.23
3.23
3.23
3.23
3.73
3.73
3.49
3.49
3.49
3.49
3.67
3.43
2.13
2.13
2.13
2.13
2.15
2.15
2.15
2.13
6.13
09_company_profile_OK_R_CS2.indd6.13 6.13
8/25/10 12:14:11 PM
6.14
09_company_profile_OK_R_CS2.indd6.14 6.14
8/25/10 12:14:11 PM
Your authorized dealer
Titus+Lama+Huwil
www.titusplus.com
TitusPlus.02.2 ENG Aug10

Similar documents

110 - KNK

110 - KNK screws 20mm long. Glissando dampers’ discreet design enhances the look of the door and occupies minimal space in the cabinet

More information

Huwil Lift up.indd

Huwil Lift up.indd the fitness of hardware for the intended purpose. We recommend assessment by the appropriate testing in the application and by technical enquiry to our representatives. Technical information While e...

More information

Titus Tekform SWD Brochure

Titus Tekform SWD Brochure the fitness of hardware for the intended purpose. We recommend assessment by appropriate testing in the application and by technical enquiry to our representatives. Technical information While every...

More information