LTD Saddlestitcher Parts

Transcription

LTD
Saddlestitcher
Parts
Pockets, Trimmers, Perfect Binding, Stackers, Oval Strap
1-800-229-0009 • Local: 952-556-5666 • e-mail:sales@updateltd.com
Contents
HT TRIMMER PARTS 1
P3 - P311 POCKET PARTS 4
HARRIS / HEIDELBERG STITCHING PARTS 8
RIMA STACKER 10
HARRIS / HEIDELBERG PERFECT BINDER 11
PRESS FOLDERS 12
McCAIN STITCHER LINES 12
HARRIS STREAMFEEDER 13
OVAL STRAPPER 13
BAKER PERKINS PRESS / FOLDER 14
BALDWIN 14
BUHRS MAILING TABLES ETC. 14
FT TRIMMER 15
GAMMERLER 15
LABELAIRE 15
PROFOLD TABBER 15
LTD
We GUARANTEE our PRODUCTS
We guarantee the quality of our products. If you are not satisfied, return the
products for replacement or refund.
To Order
WEB
PHONE
FAX
MAIL
www.updateltd.com
1-800-229-0009
1-952-556-8777
UPDATE
134 Peavey Circle,
Chaska, MN 55318
E-MAIL
sales@updateltd.com
n NO MINIMUM ORDER!
n ORDERS SHIPPED SAME DAY ON MOST PRODUCTS
We will use any recommended carriers,
FOB shipping point.
n We accept
n All orders are made subject to the Terms and Conditions
on the invoice provided to the purchaser after the order
is received. For a copy of these Terms and conditions,
please contact Update Ltd.
PRICES SUBJECT TO CHANGE WITHOUT NOTICE
ANY UNAUTHORIZED USE OF PHOTOS, ART AND/OR COPY IN THIS CATALOG IS PROHIBITED.
Copyright © 2010
Updateltd
134 Peavey Circle, Chaska, MN 55318
227 0910-1
LTD
Part #
101-0027
101-0206
101-0225
170-0056
170-0064
2000766
A640-0-1536
B640-00-1507
CT453-3
HT10A141A
HT10A143C
HT10A175A
HT10A175B
HT10B138M
HT10B138N
HT10B174
HT10B372
HT10C150A
HT11A107
HT11A107A
HT11A111
HT11A111A
HT11A113A
HT11A114
HT11A115
HT11A127
HT11A127C
HT11A133
HT11A133(H)
HT11A134
HT11A134(H)
HT11A167A
HT11A167B
HT11A171
HT11A174
HT11A175
HT11A177
HT11A178
HT11A179A
HT11A179B
HT11A180
HT11A190
HT11A199
HT11A259
HT11B109
HT11B117A
HT11B126
HT11B126A
HT11B132
HT11B132(H)
HT11B135
HT11B135(H)
HT11B136L
HT11B137M
HT11B137N
HT11B172B
Description
HT TRIMMER PARTS
PIN 3/4" (Made from shafting material for long life)
BEARING SPACE
THRUST WASHER
BOOK PUSHER
SPRING GUIDE
GUIDE POST
NUT-KNIFE
UPPER LINK STUD (Hardened for long life)
DRAW LINK BOLT
(Hardened for long life)
SHEAR PIN FOR 3 KNIFE
SHEAR PIN FOR 4 & 5 KNIFE
UPPER DRAW LINK (W/bushing pressed in)
UPPER DRAW LINK (W/bushing pressed in)
SHEAR PIN HUB RETAINER
DRAW LINK CLAMP (W/bushing pressed in)
TORSION BAR ANCHOR
BACKSTOP PIVOT, REAR
BACKSTOP PIVOT, FRONT
BACKSTOP TRACK HOLDER
BACKSTOP
BACKSTOP CAM STUD
BACKSTOP SHAFT (Made from shafting material for long life)
SPRING CLEVIS
BUSHING (BRONZE)
GATE PLATE
GATE PLATE (HARDCOATED)
GATE PLATE CENTER
GATE PLATE CENTER (HARDCOATED)
KNIFE BLOCK
KNIFE BLOCK
CROSS BAR BRACKET
PUSH ROD
CAM ROLLER
JOGGER LINK (W/bushings pressed in)
CAM LEVER
MOUNTING BLOCK
MOUNTING BLOCK
CONNECTING LINK (W/bushings pressed in)
PIVOT STUD
CLAMP GEAR
CAM ROLLER STUD
BACKSTOP LINK
BACKSTOP SPRING GUIDE
CAM LEVER - OPERATOR SIDE
CAM LEVER - DRIVER SIDE
GATE PLATE
GATE PLATE
LEVER
STUD, CLAMP POST (W/bushing & grease fitting)
STUD, CLAMP POST (W/bushing & grease fitting)
FRONT KNIFE GUIDE (HARDCOATED)
Price
$ 5.70
2.80
3.50
0.20
0.30
38.00
6.70
241.20
3.85
12.00
7.00
4.05
4.05
59.00
59.00
17.00
59.00
308.20
42.00
56.30
67.00
67.00
13.10
16.10
16.10
14.75
13.40
11.40
15.45
18.10
20.80
4.60
5.25
34.85
9.40
6.70
38.20
28.15
22.80
22.80
14.75
12.10
24.80
20.10
117.95
23.45
96.50
96.50
21.45
26.80
21.45
26.80
174.20
187.60
187.60
22.80
1
LTD
Part #
HT11B181A
HT11B181C
HT11B182D
HT11B182E
HT11B182F
HT11B182G
HT11B183
HT11B185
HT11B214
HT11B214B
HT11B298
HT11B420
HT11C102B
HT11C102H
HT11C118A
HT11C126M
HT11C126N
HT11C129F
HT11C152
HT11C153
HT11C154
HT11C155
HT11C156
HT11C187B
HT11C187B(H)
HT11D126Q
HT11D126Q-2
HT11D126S
HT12A109
HT12A119
HT12B112
HT12B112A
HT12B112AB
HT12B112B
HT12B113
HT12B113A
HT12B139
HT12B142
HT12B142A
HT12C137
HT13A171
HT13A173
HT13A176A
HT13A176AML
HT13A187
HT13A189
HT13A195
HT13A219A
HT13A228
HT13A426
HT13A427
HT13B121
HT13B159
HT13B161 HT13B161ML
HT14-464
HT14A113
Description
ANGLE GUIDE SHORT (Bronze)
ANGLE GUIDE LONG (Bronze)
JOGGER PLATE
JOGGER PLATE LONG
JOGGER PLATE
JOGGER PLATE LONG
MOUNTING PLATE
TUBE (W/collar)
BUSHING LONG W/CUTOUT (Bronze)
BUSHING (Bronze)
BACKSTOP TRACK
DRAW LINK (W/bushing pressed in)
FRONT KNIFE HOLDER (HARDER PLATE)
FRONT KNIFE HOLDER
BACKSTOP CAM (Hardened)
CAM LEVER (W/bushings pressed in)
CAM LEVER (W/bushings pressed in)
GATE FRAME
FRONT KNIFE GUIDE BRONZE
FRONT KNIFE GUIDE (Hardened Tool steel)
FRONT KNIFE GUIDE (Hardened Tool steel) FRONT KNIFE GUIDE (Hardened Tool steel)
FRONT KNIFE GUIDE (Hardened Tool steel)
CLAMP PLATE
CLAMP PLATE
(HARDCOATED)
CAM LEVER
(W/bushings pressed in)
TAPERED BUSHING FOR CAM LEVERS
CAM LEVER
(W/bushings pressed in)
WEAR PLATE CLAMP, SHAFT
SIDE KNIFE GUIDE BRONZE
SIDE KNIFE GUIDE L.H. BRONZE SIDE KNIFE GUIDE L.H. & R.H. BRONZE
SIDE KNIFE GUIDE R.H. BRONZE SIDE KNIFE GUIDE
(Hardened Tool steel)
SIDE KNIFE GUIDE
BEARING GUIDE (Phenolic)
SIDE KNIFE GUIDE
SIDE KNIFE GUIDE
BAR GUIDE
SPROCKET PIN
SPROCKET INFEED IDLER (CUT AWAY)
CONNECTOR TUBE
CONNECTING TUBE 2 1/2" LONG
CAM FOLLOWER BOLT
PUSHER LUG
PIN
PIN GUIDE
SPRING WASHER EYE PIN BOLT
SPRING WASHER HARDENED FOR LONG LIFE
SWITCH MOUNTING BLOCK
SWITCH LEVER (Hardened for long life) FINGER, PUSHER
FINGER , PUSHER (2 Inserts with longer groove)
INTERNAL ADJUSTING STUD
IDLER SPROCKET PIN
Price
$ 26.80
30.15
41.55
28.85
41.55
44.25
23.80
9.40
53.60
19.45
65.70
91.15
469.00
225.15
134.00
247.90
247.90
91.15
261.30
281.40
281.40
147.40
147.40
99.20
130.00
261.30
9.40
261.30
6.40
24.80
261.30
261.30
274.70
261.30
281.40
281.40
50.95
147.40
147.40
112.60
6.70
53.60
8.75
8.75
12.75
19.45
10.05
6.70
11.75
8.60
11.75
63.00
25.50
19.45
20.80
81.75
8.05
2
LTD
Part #
HT14A118
HT14A135
HT14A144A
HT14A147A
HT14A149A
HT14A158A
HT14A164
HT14A166
HT14A168
HT14A169
HT14A178
HT14A186
HT14A187B
HT14A188
HT14A190
HT14A195
HT14B133
HT14C142A
HT14C143F
HT14C165A
HT14C165B
HT14C165C
HT21C119D
HT21C134
HT31-178
HT31-181
HT31-183
HT31-197
HT31-199
HT31-200
HT31-202
HT31-202B
HT31-203
HT31-208
HT31-209
HT31B131
HT31B131(H) HT31B144
HT31B146
HT31B147
HT31B151
HT31B152
HT31B153
HT31B161
HT31B161(H) HT31B166
HT31C102
HT31C128
HT33-198
HT33-199
HT33-204
HT33B157
HT34-171
HT34-171-S
HT51-120
HT51-177
HT51-181
Description
SPROCKET
HINGE BLOCK
SHAFT, ROCK (Made from shafting material for long life)
SPRING ROD
PLATE-REAR, LOADING (HARDCHROMED)
IDLER SPROCKET SHAFT , SHORT
DETECTOR FINGER (Hardened for long life) CAM STOP
PLATE-FRONT, LOADING (HARDCHROMED)
BEARING SQUARE (Bronze)
ADJUSTMENT SHAFT
PIVOT LINK TUBE (Made from shafting material for long life)
FRAME, FRONT PLATE
SUPPORT TUBE
ROCKER ARM
ADJUSTING SCREW (Made from shafting material for long life)
CHAIN TRACK (HARDCHROMED)
CARRIER FRAME
PIVOT LINK
CAM
CAM
CAM
REGISTER
CLAMP PLATE 4TH & 5TH KNIFE
Shaft
CLAMP LEVER
CLAMP PLATE
BEARING CAP (PAIR) L.H. & R.H.
CLAMP, FRONT KNIFE I BEAM
CLAMP PLATE
HOUSING, POST R.H. (W/bushing pressed in)
BRONZE BUSHING FOR HT31-202/203
HOUSING, POST L.H.
(W/bushing pressed in)
CONNECTING ROD
GUIDE ROD
CHIP GATE PLATE
CHIP GATE PLATE (HARDCOATED)
BACKSTOP PIVOT
BACKSTOP TRACK
BACKSTOP LINK
BACKSTOP PIVOT PIN
BACKSTOP PIVOT PIN
SCREW
CHIP GATE PLATE
CHIP GATE PLATE ( HARDCOATED)
STATIONARY SIDE JOG STAY (Bronze)
CHIP GATE CAM FOLLOWER
GATE FRAME
SLIDER ROD
SPRING SUPPORT BLOCK
FINGER, PUSHER
SPROCKET
CAM LEVER 7/16" BORE
CAM LEVER STEEL 7/16" BORE
CHIP GATE CAM (HARDENED) SOLD IN PAIR
SPRING BRACKET
MOUNTING BAR
Price
$ 45.60
33.50
21.45
9.40
60.30
26.15
11.40
6.70
45.56
11.26
20.10
29.50
45.60
18.80
53.60
10.75
53.60
79.10
180.90
107.20
107.20
107.20
120.60
160.80
908.50
209.00
73.70
643.20
247.90
73.70
294.80
26.80
294.80
15.45
15.45
19.45
25.50
45.60
52.30
117.95
5.40
5.40
7.05
18.10
24.15
38.90
368.50
91.15
21.45
96.50
24.15
46.90
44.25
60.30
261.30
105.90
164.85
3
LTD
Part #
HT51-182
HT51-184
HT51-184(H)
HT51-185
HT51-185(H)
HT51-186
HT51-186(H)
HT51-189
HT51-190
HT51-209
HT51-211
HT51-212
HT51-213
HT53-100
HT53-111
HT53-112
HT53-113
HT53-114
HT53-177
HT54-322
HT54-391
HT54-393
HT54-405
HT54-416
106-01-5386
1556-2D
207-0005
200 9021
554 7905
557-00-1134
561 5104
568 983
575 4117
82-460-390
IG87-11F
IG187-1 EG132
EG133
EG314-2
EG314-3
EG314-4
EG314-5
EG314-8
EG315
EG315-1
EG315-4
EG315-A
EG316
EG316-1
EG316-2
EG317
EG317-2
EG317-3
EG317-3-N
EG332-25A
Description
Price
V- RAIL
CHIP GATE FINGER R.H.
CHIP GATE FINGER R.H. HARDCOATED
CHIP GATE FINGER CENTER
CHIP GATE FINGER CTR HARDCOATED
CHIP GATE FINGER L.H. CHIP GATE FINGER L.H. HARDCOATED
SPRING SEAT BLOCK
SPRING ROD
BACKSTOP LINK
BACKSTOP PIN (Shafting material)
BACKSTOP SPACER (Shafting material)
FINGER, PUSHER
(WITH HELICOIL INSERT)
BLOCK, DUMMY ARM
PUSH CAM SLIDER BOLT (shafting material for long life)
PUSHER BEARING SHAFT
SPACER
BLOCK
LEVER FEED ARM
Adjuster Block
GUIDE BLOCK
Short Shaft
ADJUSTER, SHAFT
P3 - P311 POCKET PARTS
HARRIS / HEIDELBERG
SPACER
SLIDE (HARDENED)
KNOB METAL WITH 1/4-20 SCREW
GOVERNOR NEEDLE
STEEL SEGMENT GEAR (Hardened)
GRIPPER SEAT (5/8" THICK)
FEED PAWL ROD (HARDENED)
PINCH WHEEL (USE VG13A227)
POCKET GAGE
BRACKET, POCKET SHIELD
SADDLE ASSEMBLY—SWORD
PIN, ROD EYE (Hardened for long life)
BRASS GRIPPER FINGER
SEAT WITH INSERT
GRIPPER CAM (Hardened for long life)
GRIPPER CAM PLATE (Hardened for long life)
LAP GRIPPER CAM (No bushing) (Hardened for long life)
LAP GRIPPER CAM PLATE (Hardened for long life)
SPRING ROLLER (Hardened for long life)
T-GRIPPER LEVER
MAIN GRIPPER SHORT SPRING PIN (10-32 thread) (Hardened for long life)
T- GRIPPER LEVER
LAP GRIPPER LEVER
LAP GRIPPER (Short with holes)
LAP GRIPPER ADJ. PLATE
CAM ROLLER LEVER
LONG SPRING PIN (10-32 Thread) (Hardened for long life)
SPRING EYE ROLLER (Hardened for long life)
SPRING EYE ROLLER NYLONG
GRIPPER SPRING
$ 7.05
21.45
26.80
18.80
22.80
21.45
26.80
15.45
18.10
53.60
117.95
5.40
5.40
20.10
28.15
20.10
21.45
4.60
5.40
36.20
80.40
29.50
36.20
37.55
2.70
147.40
7.75
5.40
67.00
3.35
6.70
11.40
37.55
30.85
73.70
3.35
22.80
16.75
134.00
33.50
134.00
40.20
5.40
134.00
4.05
3.35
134.00
140.70
4.05
4.05
140.70
3.35
3.35
3.35
4.70
4
LTD
Part #
EG333-10
EG333-13
EG333-15
EG333-15M&L
EG3-6-1
EG363
EG53-25
EG58-14
EG76-10
EG76-40
EG76-6
EG77-20
EG80-5
EG81-5
EG81-7
EG81-8
EG87X2A
EG88X6
EG88X7
FG TGRIPPER
FG10A104
FG11A149B
FG11A151
FG11A154B
FG11A155
FG11A199
FG12A100
FG12A100X
FG12D101
FG13A118
FG13A120
FG13A122
FG13A128
FG14A130
FG15A107
FG15A108
FG15A108X
FG15A119A
FG15C106
FG17A110
FG17A112
FG17A113
FG18A114X
FG18A114X1
FG18A132
FG18A133
FG18B105
FG21A111
FG21C100
FG21C101
FG30A155
MG14A103
PLOW LINE GUIDE
TG14A137
VG10A145
VG11-31
VG11A103
Description
GRIPPER SEAT (No vacuum hole)
BLOCK
GRIPPER SEAT ASSEMBLY (w / vacuum line)
GRIPPER SEAT ASSB’Y W/ BLOCKS
GRIPPER
LAP GRIPPER LEVER
FEEDER FINGER (Governor needle) (Hardened for long life)
FEED PAWL (Hardened for long life)
GRIPPER ADJ. LUG (Same as VG13A223)
.750 GRIPPER SEAT
GRIPPER SPRING ROD GUIDE
REGISTER ROLLER NYLON
CAM COLLAR
ADJUSTING NUT (Bonze)
SPRING ROD
ROD EYE (Hardened for long life)
CAM (1 OF 3 IN SET) (Hardened for long life)
T GRIPPER
IDLER SPROCKET STUD
ROTOR DRUM SHAFT
OPENER DRUM SHAFT TRANSFER DRUM SHAFT
TAKE UP STUD
IDLER SPROCKET STUD
HUB STEEL (1" BORE)
HUB STEEL ( 1" BORE)
FEED CAM (Hardened for long life)
SEGMENT GEAR
HUB GRIPPER ASSEMBLY
GRIPPER HUB CLINCHER DRIVER (6" Long) (Hardened for long life)
MAIN GRIPPER FINGER (Straight end)
BRONZE TUCKER BLOCK IDLER ROLLER LEVER L.H.
IDLER ROLLER LEVER R.H.
SLIDE ROD
TUCKER CAM (Hardened for long life)
VACUUM BASE
BASE PLATE (BRONZE)
CAM (Hardened for long life)
SUCKER TUBE (Offset left)
SUCKER TUBE (Offset right)
SPRING ROD
SLIDE ROD - SUCKER BAR
LEVER - SUCKER BAR
OPENER DRUM SUCKER HEAD ASSY.
CLOSING FINGER CAM (Hardened for long life)
OPENER FINGER CAM (Hardened for long life)
GUIDE SPRING
CLAMP BLOCK
PLOW LINE GUIDE ASSY. WITH BENT TUBE & HARDWARE
REVERSE LAP GRIPPER
PIVOT SHIFT LEVER
DRAG ASSEMBLY
CLAMP-CAM
Price
$ 40.20
28.15
87.10
127.30
4.05
140.70
6.70
8.75
8.05
3.35
14.75
6.50
45.60
11.40
11.40
18.80
261.30
167.50
167.50
17.45
28.15
45.60
40.20
140.70
54.95
40.20
194.30
194.30
93.80
67.00
415.40
26.80
40.20
6.70
100.50
81.75
81.75
30.85
113.90
167.50
73.70
107.20
100.50
100.50
13.40
11.40
147.40
201.00
107.20
107.20
5.40
29.50
83.10
3.35
4.70
167.50
56.30
5
LTD
Part #
VG11A112
VG11A113A
VG11A113B
VG11A138
VG11A142
VG11A144
VG11A181
VG11A182
VG11A189
VG11B145
VG11B209
VG11B232
VG11C149
VG11C149(B)
VG11C149N
VG11C149N19.5
VG11C149N21
VG12-169
VG12A101
VG12A101ML
VG12A102
VG12A102ML
VG12A119
VG12A139
VG12A160
VG12B105
VG12C120C
VG12C121C
VG13-103A
VG13-104B
VG13-268A
VG13A100A
VG13A102
VG13A102-S
VG13A103
VG13A104
VG13A108
VG13A112
VG13A116
VG13A118
VG13A145
VG13A176
VG13A178
VG13A195B
VG13A199A
VG13A203
VG13A223
VG13A226
VG13A227
VG13A228
VG13A229
VG13A232
VG13B218
VG13B224A
VG13B225
VG13B236
VG13B245
Description
TOP SHEET GUIDE
NEEDLE HOLDER STEEL (nickel plated)
NEEDLE HOLDER aluminum
SADDLE SUPPORT
T-NUT
COVER SUPPORT ANGLE
SPRING ROD
SPRING ROD ONLY (Hardened)
Support Plate
COVER SUPPORT
TAKE UP ARM
SADDLE SUPPORT
SADDLE SWORD(STAINLESS STEEL W/ SUPER LARGE LEAD IN)
SADDLE SWORD-SOLID ALUM.BRONZE SADDLE SWORD - (metal with NYLON coating)
SADDLE SWORD - (metal with NYLON coating) 19.5" LONG
SADDLE SWORD NYLON COATED 21" LONG
LEVER FEED ARM
ROD, FEED PAWL
FEED PAWL ROD 6.5" LONG
FEED PAWL ADJ. ROD
FEED PAWL ADJ. ROD 9 3/4" LONG
SPRING ROD
GOVERNOR NEEDLE (Heat Treated)
NEEDLE HOLDER 4 1/2" LONG
FEED PAWL ACTUATING LEVER
FEED PAWL (casting only)
FEED PAWL ASSEMBLY
ROD EYE - STEEL HARDENED 7/16” HOLE
SPRING ROD (Hardened)
REFLECTOR BRACKET W/REFLECTOR
GRIPPER SEAT
SEGMENT GEAR
Segment Gear Steel (heat treated)
GUIDE, ROD (brass)
SPRING ROD (Made from Shafting Material for long life)
HUB
GRIPPER GEAR (Hardened for long life)
CAM SUPPORT BUSHING W/BUSHING PRESSED IN
GRIPPER SHAFT (Made from Shafting Material for long life)
GRIPPER SHAFT (Made from Shafting Material for long life)
LOCK CAM ADJ.
ROD EYE ADJ.
STOP REGISTER
PINCH WHEEL ARM CLEVIS
PIN, PINCH WHEEL ARM
ADJUSTING LUG (Heat treated)
SPACER
PINCH WHEEL (urethane w/steel insert/bronze bushing)
PINCH WHEEL (HARD NYLON w/bronze bushing)
PINCH WHEEL ARM
PINCH WHEEL SPRING
STOP REGISTER BRONZE
ROD EYE (Hardened for long life)
PIN (Hardened for long life)
ADJUSTER
PINCH WHEEL ASSEMBLY L.H. (Specify Nylon or Urethane wheel)
Price
$ 13.40
14.40
13.40
16.10
8.05
14.10
12.10
13.40
10.05
10.75
53.60
14.75
60.30
180.90
53.60
73.70
73.70
26.80
6.70
8.75
8.40
17.45
12.10
2.70
19.45
40.20
127.30
167.50
11.10
10.75
8.05
3.35
67.00
67.00
10.75
10.75
10.75
42.90
50.60
15.45
13.40
20.10
17.45
19.45
16.75
3.35
4.70
12.10
7.75
9.05
7.40
4.40
26.80
13.40
2.70
12.10
71.05
6
LTD
Part #
VG13B245ML
VG13B246
VG13B246ML
VG13C109A
VG13C110A
VG13C111A
VG14-187
VG14-187WML
VG14A106
VG14A107
VG14A107X
VG14A108
VG14A109
VG14A110A
VG14A137
VG14A138
VG14A166
VG14A167
VG14A168
VG14B103
VG14B103B
VG14B104
VG14B135
VG14B135ML
VG14B136
VG14B136ML
VG14B174
VG14B185L
VG14B185R
VG14C116A
VG14C139A
VG14C170
VG14C171
VG14C182
VG14C183
VG15A114A
VG15A124A
VG15A174
VG15A175
VG15B178C
VG15B179
VG15B198
VG15B199
VG17-108
VG17A106A
VG17B105
VG18-121B
VG18-129A
VG18A107
VG18A121
VG18B114A
VG18B114AML
VG18C120
VG19B110
VG21A105
VG21A108
VG21A118
Description
L.H. PINCH WHEEL ASSY. W/ STEEL SLEEVES
PINCH WHEEL ASSEMBLY R.H. (Specify Nylon or Urethane wheel)
R.H. PINCH WHEEL ASSY. W/STEEL SLEEVES
CAM HOLDER BRACKET (HORIZONTAL CUT)
WASHER CAM HOLDER BRACKET
MAIN GRIPPER (long slotted)
LAP GRIPPER (short slotted)
LAP GRIPPER 2.75" LONG
TRANSFER SPRING PIN (Made of shafting material for long life)
GRIPPER SHAFT (Hardened for long life)
GRIPPER SEAT PIN (Made from shafting material for long life)
TEE VACUUM OPENER
ADAPTER, VACUUM OPENER
SPRING PIN 1/4-20 SHORT (Hardened for long life)
SPRING PIN 1/4-20 LONG (Hardened for long life)
INSERT FOR BRONZE CASTING
GRIPPER LEVER
GRIPPER LEVER 1/4-20 Tap for spring pin
GRIPPER LEVER
TRANSFER SUCKER TUBE
SUCKER TUBE different from OEM - in arc form with multi tubes
TRANSFER SUCKER TUBE
SUCKER TUBE different from OEM - in arc form with multi tubes
T-GRIPPER
CAM HOLDER LEFT
CAM HOLDER RIGHT
MAIN GRIPPER LEVER (SOLID arm- not hollow like OEM)
LAP GRIPPER CAM (Hardened for long life)
MAIN GRIPPER CAM (Hardened for long life)
MAIN GRIPPER CAM ASSY.
LAP GRIPPER CAM ASSY.
SPRING ROD (Made from shafting material for long life)
SHEET ROLLER BRACKET
SPLIT COLLAR GUIDE HOLDER
ROLLER CLAMP
DIPPER ARM
SIGNATURE GUIDE (Stainless Steel)
BLADE, DIPPER R.H.
BLADE, DIPPER VALVE DISC VALVE DISC CLAMP
VALVE DISC
STUD, ECCENTRIC (Made from Shafting Material for long life)
USE VG18B114A
SUCKER TUBE LEVER
STUD (Made from Shafting Material for long life)
LINK SUCKER BAR
LINK SUCKER BARW/spherical ball bearings pressed in
CAM FOLLOWER LEVER
MISSING SIGNATURE BRACKET
SPRING ANCHOR PIN
GRIPPPER SEAT INSERT
CAM ROLLER LEVER (BRONZE)
Price
$ 73.70
71.05
73.70
107.20
107.20
107.20
46.90
10.75
2.55
2.45
3.35
4.40
21.45
4.05
9.35
6.70
3.35
3.35
13.40
73.70
73.70
73.70
29.50
29.50
29.50
29.50
24.15
64.35
64.35
113.90
73.70
65.70
65.70
105.20
114.60
12.10
25.50
14.75
16.10
40.20
13.40
17.45
17.45
32.20
25.50
32.20
14.75
40.20
67.00
13.40
40.20
71.05
128.65
64.35
4.70
1.35
14.75
7
LTD
Part #
VG21A128
VG21B134
VG21B134V
VG21B140
VG29B116
VG29B120
VG29B120(H)
VG29B121
VG29B121(H)
VG29C118
VG29C119
VG32-104A
VG32-110A
VG32-112
VG32-113A
VG32-116
VG32-117
VG32-118
VG32-119
VG32-120
VG32-121
VG32-143
VG32-143-1
VG32A106
VG32B103A
VG32C104
VG34B103
VG34B104
VG34B106
VG34B106ML
VG34B107
VG34B108
VG34C109
VG34C110
VG3A120MOD
WG33A120
ZG12B105A
ZG30B100
17
200 3177
2003143ML
2003177ML
201 0807
34154-3
34154-4
34154-5
34154-9
542-00-1290
5552515
5552527
5685143
5685173
5689820
557-00-1498
5773741
587-00-1029
Description
BRONZE GRIPPER FINGER
GRIPPER SEAT WITH INSERT
GRIPPER SEAT W/ INSERT (vacuum option)
BRACKET
CLAMP DRIVE
DIPPER, L.H.
DIPPER, L.H.
HARDCOATED
DIPPER, R.H.
DIPPER, R.H. HARDCOATED
VACUUM BODY
VACUUM BODY
CAM FOLLOWER LEVER (W/bushings pressed in)
LATCH OUT PLATE
CLEVIS (HARDENED)
LATCH ARM (HARDENED)
CLEVIS (Hardened for long life)
STOP LATCH LEVER (Hardened for long life)
CLAMP
LATCH, LEVER INSERT
SIGNATURE INHIBIT MOUNT
CYLINDER MOUNTING BRACKET
INHIBIT STOP (2 holes-fits VG32C104 & older levers)
INHIBIT STOP (3 holes-fits VG32-104A LEVER)
STUD 3" LONG
RETAINER PLATE (Hardened for long life)
CAM FOLLOWER LEVER (W/bushings pressed in)
STRAP
BRACKET POST
REFLECTOR BRACKET
REFLECTOR BRACKET ONLY
BRACKET - POST
SWORD WIPER
DRAG BRACKET
DRAG
SPACER
GRIPPER SEAT
NEEDLE HOLDER
POCKET GAGE REV B P311/P15
HARRIS / HEIDELBERG STITCHER PARTS
GRIPPER BAR ASSEMBLY FOR 850 Stitcher- complete BAR, ACTUATING GRIPPER (Hardcoated)
ROLLER GRIPPER SOLID NYLON W/BUSHING
ACTUATOR BAR - FLAT NO RADIUS
GRIPPER FINGER “705”
PLUNGER
ADJ. NUT
CLUTCH SPRING
SWITCH DISC
SPROCKET DRIVE LEVER
BLOCK
(SP1000)
SPRING GUIDE ROD
(SP1000)
GUIDE RAIL SHAFT
(SP1000)
MOUNTING BRACKET
SUCKER BAR
KEEPER
CHAIN PUSHER
ADJ. NUT
Price
$ 17.45
30.85
35.85
21.45
11.40
10.75
19.45
13.10
19.45
93.80
93.80
167.50
50.95
38.90
120.60
13.40
26.80
6.70
10.75
40.20
26.80
19.45
19.45
24.15
17.45
107.20
10.75
13.40
4.05
4.05
13.40
7.75
13.40
24.80
3.70
3.35
6.70
64.35
2144.00
536.00
8.05
335.00
60.30
6.05
3.50
1.25
23.45
64.35
41.55
16.10
59.00
265.35
166.20
10.05
1.35
6.40
8
LTD
Part #
A200-0421
CI10B213
CS12A130
CS12B126
CS12B144
CS14-296
CS14-296B
CS14A161
CS14A169
CS14B116
CS14B191A
CS14B191B
CS14B192A
CS14B226A
CS14C142
CS14C186
CS14C193A
CS14C230
CS14C230B
CS14D246
CS19-189
CS19-194
CS25A101
CS25A102
CS25A107
CS25A108
CS50A114B
CS50B103
FS11-228
FS11B107
FS14-284B
FS14-356
FS14-409
FS14-410
FS15-135E
FS15-135F
FS15-139D
FS15-245
FS15-750A
FS15B199
FS18-113B
FS18-151A
FS18-153A
FS18-170A
FS18-198
FS18A124
FS27-111
FS27-115
FS27-116
FS27-117
FS27-156
FS27-164
FS27-169
FS27-171
FS27-172
FS27-179
FS27-180
Description
CHAIN PUSHER (Straight)
SPROCKET HUB
DISC CLUTCH
HUB, CLUTCH (HARDENED)
CAM LEVER
BRONZE GIB
BRASS GIB
STUD
GRIPPER STUD (w/oil cup pressed in)
SPROCKET DRIVE ARM
WEAR BAR (Hardened for long life)
FELT BACKUP PLATE
BAR OPENER CRANK, GRIPPER
INNER SHUTTLE (Hardened for long life)
GRIPPER BAR SLIDE (W/bushings pressed in)
BUSHING FOR CS14C230
GRIPPER BAR
ANTI BACKUP LEVER (HARDENED TOOL STEEL)
FEED TUBE
BLOCK CLINCHER
CLINCHER DRIVER (Hardened for long life)
BACK UP PLATE
SCREW (Hardened for long life)
PIVOT SHAFT
Arm
CRANK
CRANK
SPROCKET
CHAIN LUG (Urethane)
BLOCK, OUTSIDE
BLOCK, INSIDE
OUTER BOOK DIRECTOR (Nylon)
INNER BOOK DIRECTOR (Nylon)
REJECT BAR
ADJUSTING ROD
REJECT BLOCK (Hardened)
WEAR BLOCK (HARDENED TOOL STEEL)
CONNECTING ROD
CONNECTING LINK
LEFT CRANK
UPPER LINK
CONNECTING LINK
BEARING BOLT
SHAFT
SLIDE BAR (Hardened for long life)
SLIDE WAY
SIDE GIB
SPRING ROD
SLIDE GUIDE (BRONZE)
ADJUSTER BLOCK
DRIVE SLIDE
DRIVE GUIDE (BRONZE)
GUIDE CLAMP
GUIDE ROLLER
Price
$ 1.35
576.20
23.45
84.45
103.20
107.20
80.40
9.40
10.40
270.70
147.40
155.45
167.50
6.70
308.20
1206.00
509.00
174.20
20.10
209.05
9.40
25.15
12.10
36.20
7.75
9.40
16.10
804.00
198.35
160.80
65.70
0.70
26.80
26.80
95.15
100.50
81.75
13.40
49.60
40.20
36.20
101.85
368.50
101.85
33.50
101.85
53.60
84.45
201.00
46.90
8.75
28.15
50.95
11.75
26.80
32.20
10.75
9
LTD
Part #
FS27-183
IG1261
IG126110A
IG1278
IG380-21
IG380-23
IG460-15
IG782-3
IG851-13
IG851-15
IG851-16
IG851-17
IG851-18
IG851-19
ML-001R
ML-002L
SS10A116
SS10B136
SS119BB
SS14A106
SS14B104
SS14B134
SS151-1
SS159-3
SS161-1
SS260X
SS261
SS261-3
SS264-09A
SS264-10
SS29-49
SS29-54
SS347X
SS36-18
SS36-21
SS36-6
SS393
SS400X5
SS41-6
SS440-15
SS440-15B
SS440-16
SS440-18
SS440-44
SS440-45
SS44O-21
SS58-43
SS58-44
VG10B333
VG10B333(3)
VG25A201
VG25A201A
S-19-233
S-19-233-ML
S-19-522
S-19-734
Description
PIVOT
CALIPER SEGMENT
Feed Pawl (Assembly)
CAM ROLLER LEVER
TOP SHEET GUIDE
NEEDLE HOLDER
PLATE ABUTTMENT LUG
CALIPER PIN (Hardened for long life)
CARRIER
SPROCKET
SPROCKET
SPROCKET
SPROCKET
SPACER
CHAIN LINK ATTACHMENT SP1000
CHAIN LINK ATTACHMENT SP1000
CLUTCH PLUNGER
ROLLER GUIDE BAR
GRIPPER ASSEMBLY (Complete assembly)
SPRING
GRIPPER
(Machined casting only-no bushing or bearing)
GRIPPER ASSEMBLY (Complete assembly)
CONNECTING ROD -17"
CONNECTING ROD -18 1/8" CONNECTING ROD -10 1/4" SLIDE BAR ADJUSTING BRACKET
CONNECTING LINK
STUD—CONNECTING LINK
CRANK PIN SLEEVE (Hardened for long life)
CRANK PIN
NYLON ROLLER (Beveled edge)
WEAR STRIP
GIB BLOCK (Bronze)
SLIDING BAR (Without wing)
SLIDING BAR GIB (Bronze)
SLIDING BAR GIB (Nylon)
CONVEYOR BRACKET
GRIPPER BAR CRANK ASSEMBLY
CLINCHER BAR
GRIPPER BAR GIB (Bronze)
GRIPPER BAR GIB (Brass)
ECCENTRIC ADJ. STUD BUSHING-THREADED
STUD, GRIPPER BAR (Hardened with fitting)
GRIPPER BAR
GRIPPER BAR (13 HOLES)
STARTER STUD (Hardened for long life)
GRIPPER SPRING
NYLON RETURN TRACK Beveled ends 60" long
NYLON RETURN TRACK Beveled ends 36" long
CHAIN LUG (HARD OR SOFT)
CHAIN LUG (HARD OR SOFT)
RIMA STACKER
4" FLIPPER ROD HARDCOATED
JOGGER SPRING
MOUNTING STRAP
Price
$ 7.05
261.30
205.05
96.50
26.80
29.50
20.10
5.70
91.15
50.95
48.25
46.90
45.60
42.90
50.95
50.95
10.05
402.00
64.35
2.25
42.90
64.35
42.90
40.20
33.50
134.00
154.10
20.10
134.00
68.35
6.70
134.00
127.30
127.30
33.50
16.10
187.60
1474.00
160.80
107.20
67.00
32.20
5.40
12.10
603.00
536.00
16.10
1.15
113.90
60.30
0.70
0.70
5.40
5.40
3.35
93.80
10
LTD
Part #
S-19-735
S-19-737M
S-19-996
S-20-118
S-20-118ML
S-20-137
S-20-396M
S-40-290
S-80-154M
S-80-635
S-80-636
300 2439
3004402ML
614-0059
C-79
C-79-.375
CM11A127E
CM11A173
CM11B131K
FG5687287
FG5687288
FG5687289
FG5687293
MA9332
MB16691
MB19713-1
MB2967A-5
MB4112B
MB4113
MB4116
MB4262
MB45345
MB9312
MC4254
UB11-215
UB11A100D
UB11A105
UB11A109
UB11A113A
UB11A135
UB11A138
UB11A146A
UB11A147
UB11A147C
UB11A149
UB11B148
UB13-725
UB13A371
UB19A104
UB19A125
UB19B193
UB19B212
XB11A323A
XB11A392
XB11A393
XB13B553B
Description
DIVERT GATE BLADE
ARM-MOUNTING - DIVERT GATE
5" FLIPPER ROD
PUSHER 9 1/4
Guide, short (hardcoated)
SPACER
PIVOT ARM - DIVERT GATE
BRACKET
BRACKET CLAMP
HARRIS / HEIDELBERG PERFECT BINDER / UB
SAW BACKUP INSERT (BRASS)
SAW BACKUP INSERT (HARDENED TOOL STEEL)
REFLECTOR
BACK UP PLATE 1/2" THICK
BACK UP PLATE 3/8" THICK
NYLON ROLLER
RETAINER PLATE
BOOK CLAMP
Gripper Rod End Housing
Shoulder Bolt
Spacer
Gripper Rod End Assy.
FINGER STUD, LATCHOUT
CLEVIS AIR CYL. LATCHOUT
PUSHER LUG 4 3/8”
GATHER CHAIN LUG
LATCHOUT SHAFT (Made from shafting material for long life)
LATCH-INHIBIT (Hardened)
LATCH (Hardened tool steel)
CAM ROLLER BOLT
MOUNTING BLOCK (SAME AS XG15A110B)
INHIBIT LATCH (Hardened tool steel)
ROCKER ARM
BOOK REGISTER
BRACKET SPRING LINK CLAMP
SPRING BLOCK
LEVELING ROD 1/4-28"
HEX HEAD SHOULDER BOLT
STUD, CLAMP OPENER (Hardened for long life)
ECCENTRIC ADJ. STUD REGISTER, CLAMP
REGISTER PIN 5/16" THREAD BUSHING
CLAMP OPENER ROLLER ASSEMBLY
BINDER INFEED FINGER
Arm Support Shaft
GIB (BRONZE)
YOKE GUIDE BLOCK (BRONZE)
BEARING HOUSING
BEARING RETAINER
LEVELING TUBE
LOCATION PIN BRACKET
LOCATION PIN
CHAIN PUSHER LUG 4 9/16" long
Price
$ 40.20
12.10
5.40
5.40
5.40
24.15
25.50
4.05
25.50
17.45
20.10
21.45
100.50
9.05
30.85
26.80
17.45
2.50
8.85
32.85
8.05
3.35
52.95
9.70
28.15
34.85
12.10
20.10
52.30
45.60
26.00
7.40
52.30
167.50
6.40
10.05
24.15
12.10
8.75
6.40
17.80
5.70
6.70
6.05
2.70
52.30
32.20
33.50
76.40
53.60
113.90
49.60
6.05
5.40
5.40
34.85
11
LTD
Part #
XB13B553C
XG12-288
XG12-316
XG12-319
XG12-331
XG12-368
XG12-370
XG12A219
XG13-247
XG13A168
XG13A169
XG13D120C
XG14C261A XG15-259
XG15-266
XG15A107A
XG15A110A
XG15A110B
XG15A110S
XG15A149A
XG15A180A
XG15A183A
XG15A186
XG15A196
XG15A209A
XG15A229
XG15B109
XG16A262
XG16C228B
XG22-155
XG22-155A1
XG22B148-A
XG29A130
XG34C798A
448419
466655
466655(B)
473109
477521
487091
487094
489137
5257174
JT22949
TCF60
X28604
Z16-688
CF1-150A2
FB1659A2
FB604A1
FE-782A
FE-783A
FE-795A
FE-803A
HS1-888B
Description
Price
PUSHER ALUM 6" LONG
$ 34.85
STOP BRACKET
5.40
HORIZONTAL GUIDE BLOCK
20.10
CLAMPING BRACKET
36.20
SUPPORT
10.75
FIXED GUIDE MOUNTING BRACKET
40.20
RESTRICTOR BRACKET
20.10
BACK GUIDE TYPE A ASSY.
10.75
SHAFT
16.10
SPRING ROD
12.75
PIVOT ARM STUD
14.45
SUCKER CAM
268.00
SHAFT
60.30
CAM
301.50
EXTENDED PIVOT BLOCK
68.35
GRIPPER SHAFT
20.10
GRIPPER SEAT ASSY. (XG15A110B & XG15A110S)
14.75
GRIPPER BLOCK ONLY (FOR XG15A110A)
7.40
GRIPPER SEAT ONLY(SOLID URETHANE W/METAL INSERT) (FOR XG15A110A) 7.40
GRIPPER ADJ. PLATE (HARDENED)
9.40
SPRING SHAFT (Made from shafting material for long life)
9.40
BLOCK PIVOT ASSY.
64.35
SPRING STOP BUSHING
5.10
SHAFT, SEGMENT
21.45
PHENOLIC TUBE
4.70
REFLECTOR BRACKET
5.70
GRIPPER SEGMENT GEAR STEEL
93.80
MISS BLOCK
24.15
CAM
234.50
CHAIN LUG 2 1/8" LONG
NYLON
10.05
CHAIN LUG 2 11/32" LONG NYLON
10.05
PUSHER 2 1/2" TALL ALUMINUM
25.50
ACTUATOR LEVER
10.75
FINGER FOR REJECT GATE
13.40
PRESS FOLDERS
GRIPPER FINGER
40.20
NYLON GUIDE (With metal thread insert)
48.25
BRASS GUIDE
234.50
NYLON UPPER GUIDE
234.50
BOOK GUIDE
87.10
SHEET RETAINER (Lower delivery cylinder nose)
938.00
NYLON GUIDE
99.20
SHEET GUIDE- 19" LONG
201.00
GRIPPER FINGER
26.80
GUIDE FINGER, NYLON
16.10
GRIPPER FINGER
26.80
GRIPPER FINGER
26.80
SHEAR KEY
21.45
MCCAIN STITCHER LINES
GRIPPER
(Inserter)
16.10
GEAR RACK STUD (HARDENED)
60.30
GEAR RACK STUD (HARDENED)
64.35
Spacer
5.40
Straight Stud
18.45
Eccentric Stud
32.20
Spacer
5.40
WEAR STRIP
46.90
12
LTD
Part #
MT1545A
MT545A
TA145A
TA145A1
BL13A482
BL13A484(I)
BL31B102
BL31B115
BL31B120
BL31B122
BL51B166
BL60-195
BL60D111
C330-00-1312
C330-00-1313
1D711
1D713
1D717
1D718-3
1D719-4
1D720
1D725
1D741
1D746
1D754-1
1D800
1D851
2C643-2
2C648
2C651
2C663
2C747
2C819-1
2C898-12
2C930
2C936
2D187-2
2D191
2D195-1
2D203
2D209
2D211
2D212-1
2D437-1
2D441
2D442
2D452
2D470
2D473
2D776
2D898
2D921
2E869
3C279
3C325
Description
3/16" PAD SPACER (OTHER THICKNESS AVAILABLE)
GRIPPER LUG
GRIPPER LUG
3/16" PAD SPACER (other thickness available)
HARRIS STREAMFEEDER
INSERT
JOGGER SHOE-INSERT ONLY
CLAMP FINGER
JOGGER SHOE HOUSING
THRUST SPACER (BRONZE)
JOGGER ROD (SHAFTING MATERIAL)
TAIL JOGGER
JOGGER FINGER
TAIL JOGGER
JOGGER ARM R.H.
JOGGER ARM L.H.
OVAL STRAPPER
PLATEN CAM HARDENED
TENSION CAM (HEAT TREATED)
Main Shaft
Plate L.H. Side (tin coated)
Plate R.H. Side (tin coated)
DRIVE PULLEY
END PLATE
Trigger (Heat Treated-Nickel plated)
ECCENTRIC SHAFT
Drive Bracket (nickel plated)
ROD END (NICKEL PLATED)
L.H. Track Opener (nickel plated)
Stripper Mount (Nickel Plated)
Center Stripper (hardened)
END SPACER
LEVER PIN
HEATER BLADE
END ROLLER SHAFT
HEATER COVER
CLAMP (NICKEL PLATED)
SPRING BRACKET
FEED TUBE
R.H. ENTRY GUIDE (NICKEL PLATED)
Top Guide (Hardcoated)
L.H. GRIPPER (NICKEL PLATED)
R.H. GRIPPER CATCH (NICKEL PLATED)
R.H. SUPPORT BLOCK
L.H. Support Block
L.H. GUIDE HARD ANODIZED
R.H. SIDE GUIDE (HARDCOATED)
L.H. SIDE GUIDE (HARDCOATED)
ENTRY GUIDE (NICKEL PLATED)
MAIN SHAFT
CORNER COVER (NICKEL PLATED)
COVERED ROLLER
SPROCKET MOUNT FIXED SPROCKET MOUNT
CAM (HARDENED)
DRAG HARDCHROMED
Lifter (hardened)
Price
$ 4.05
8.05
8.05
4.05
17.45
18.80
6.40
54.95
12.10
14.75
26.80
28.15
26.80
83.10
83.10
154.10
430.15
1802.30
593.65
964.80
667.35
1029.15
340.40
71.05
167.50
750.40
249.25
44.25
130.00
59.00
50.95
10.75
29.50
103.20
36.85
368.50
268.00
301.50
194.30
422.10
247.90
332.35
302.85
111.25
87.10
87.10
274.70
891.10
91.80
276.05
92.50
97.85
328.30
56.30
265.35
13
LTD
Part #
3C364-1
3C408-1
3C409
3C413-4
3C418-2
3C424
3C458
3C460
3C512
3C513
3C666
3C861
3C884
3C908
3C956-1
3C965
3D485
3D567
3D679
3-E216
4C140-3
4C146-2
4C147
4C149
4C209
4C218-2
4C219
4C350
4C369
4C370
4C400
4C598
4C732
4C793
4C794
4C832
4D034
5C126-3
5C172
5C279
8C482
6418336B
6469451L
754223
9464013K
ST1000
ST754223
189132
M103-072-05
M103D454-02
PBS10-142
PBS11-179
106083
20-1-0384
Description
Spacer
PULLEY BRACKET
Spring Mounting Block (nickel plated)
BRACKET
Roll Lever Support (nickel plated)
CHANNEL (NICKEL PLATED)
PULLEY STUD
SHAFT
FEED LEVER (NICKEL PLATED)
INNER RACE (HARDENED)
Shaft Support
ROLLER
ROCKER SHAFT
SPACER
Pin (Shafting Material)
SHORT SUPPORT PIN
BELT TAKE UP ARM
GUARD (NICKEL PLATED)
CAGED ROLLER
COUPLER
Idler Roller
STRAP GUIDE
STRAP GUIDE - NICKEL PLATED
CLEVIS (NICKEL PLATED)
Pulley (nickel plated)
PULLEY BLOCK - NICKEL PLATED
Idler Flange
Washer (Nickel Plated)
ROLLER SHAFT
ROLLER
SHAFT
Stud Post Wrench- w/magnet
DRIVEN PULLEY
SPROCKET SHAFT
Shaft
END CAP
Actuator (hardcoated)
PULLEY BLOCK
LIFTER (HARDCHROMED)
ACTUATOR EXTENSION
SWITCH ACTUATOR (HARDCOATED)
BAKER PERKINS PRESS / FOLDER
SHEAR KEY
INK FOUNTAIN KEY (Hardened for long life)
LOW PROFILE GRIPPER (Hardened)
WATER STOP BAKER PERKINS G14 nickel plated
LOW PROFILE GRIPPER (Hardened for long life)
LOW PROFILE GRIPPER (Hardened for long life)
BALDWIN
SLIDE BED
MOUNTING BAR
PAPER GUIDE
BAR, DIVERT GATE
GAPPER FORK
BUHRS MAILING TABLES ETC.
20-1-0384 GRIPPER
GRIPPER
Price
$ 12.10
65.00
227.80
207.70
202.35
190.30
50.95
91.15
127.30
83.10
19.45
6.05
80.40
105.90
46.90
13.40
269.35
32.85
636.50
1105.50
97.85
87.10
20.10
113.90
132.70
41.55
48.25
16.10
29.50
48.25
32.20
111.25
59.00
21.45
12.75
30.85
79.10
254.60
83.10
24.15
57.65
40.20
52.95
40.20
30.15
53.60
40.20
40.20
160.80
46.90
97.85
17.45
12.10
12.10
14
LTD
Part #
4051-048
4221-126
4227-010
AO50520-001
711-2126A
FT13A351
FT13B250
109455 REV E
PR300-56-01-006-2
RS113-07-00-017
315 6152
520737
330 2141
B-74-305-00
PM-215-0222
0304.1740.4
0304.1740.4AL
0387.3608.4
0387.3609.3
0416.2206.3
0416.2207.4
3121319
3121327
312176
312177
112049
120390
144001
936076
103-05-053
6135-93-012
6135-93-056AS
6135-93-056OP
614-6-15
513 050
513 239
513 264
P188487
114A082
114A083
290B1303
295A1430
295A2235
550B084
550B878
550B878(H)
0571-432
0675-034
0930-197
9981-998
PB3980
PB4322
PB4324
Description
GRIPPER SPRING PLATE
Double Threaded Bolt
GRIPPER (NICKEL PLATED W/RUBBER PAD)
Bushing
CUTTER
FT TRIMMER
NYLON PUSHER BLOCK
PUSHER
GAMMERLER
FINGER
GUARD
BUSHING
BLOCK
CHAIN LUG-MAILING TABLE Aluminum
LABELAIRE
PLASTIC FINGER
DRIVE SHAFT (SHAFTING MATERIAL)
HOLD DOWN SHAFT
PUSHER FINGER (HARDENED)
PUSHER FINGER (ALUM. HARDCOATED)
PLATE for 387 pockets
HOLDER for 387 pocket
Segment
Bushing for Segment
PROFOLD TABBER
ANVIL STRIP R.H.
ANVIL STRIP L.H.
BEARING BLOCK R.H.
BEARING BLOCK L.H.
STRIPPER FINGER (HARDCOATED)
NOSE ROLLER (STACKER)
STACKER FINGER 13" LONG NICKEL PLATED
STACKER FINGER 15 1/2" LONG NICKEL PLATED
TAPER PLASTIC JOGGER ROLLER
ROBOT HAND CENTER GUIDE
ROBOT HAND TRACK R.H.
ROBOT HAND TRACK L.H.
ELEVATOR FINGER
CUTTER
SCRAPER FINGER
LOWER SCRAPER FINGER
PUSHER ARM BRACKET (Signode strapper)
V-BLOCK
V-BLOCK ADJUSTABLE
TOP CHAIN RAIL
FADE AWAY PIN
NYLON LUG SHORT
RESTRICTOR PLATE
R.H. GATE
R.H. GATE (HARDENED FOR LONG LIFE)
TOOTH (NICKEL PLATED)
PLIER (HARDENED)
BUSHING
SPROCKET, FACING
UNIVERSAL JOGGER PLATE
ECCENTRIC JOGGER
JOGGER
Price
$ 6.05
26.80
26.80
17.45
99.20
20.10
368.50
127.30
201.00
6.40
32.20
12.10
42.90
46.90
13.40
44.25
30.85
21.45
40.20
127.30
5.40
40.20
40.20
32.20
34.85
33.50
29.50
108.55
124.65
36.20
107.20
107.20
107.20
128.65
101.85
26.80
21.45
321.60
23.45
26.15
45.60
9.40
9.05
134.00
120.60
134.00
71.05
154.10
12.75
25.50
8.75
33.50
5.40
15
LTD
Part #
290162
290279
290280
290478
290479
290480
290481
VT19-353
WG33BB136A
295 87
4503A
525 7041
200-063-23-01
211117-1
2164-265-00-0
30106021B
KG25B105
Description
PANEL HOOD TRITON ES
SEAL-CHARGE BAR
SEAL-CHARGE BAR, END
SEAL-CHARGE BAR, SIDE, RH
SEAL-CHARGE BAR, SIDE, LH
SEAL-CHARGE BAR, SIDE FORWARD -TOP LH
SEAL-CHARGE BAR, SIDE FORWARD - TOP RH
NYLON CONVEYOR BAR FINGER
GRIPPER SHAFT (SHAFTING MATERIAL)
BACKSTOP FINGER
SEAT (URETHANE)
KEEPER (ALLOY STEEL)
NEEDLE BRACKET
SHEAR PIN
NEEDLE
MOUNTING BRACKET
FEED CONTROL PLATE
Price
$435.50
49.60
41.55
45.60
45.60
40.20
40.20
40.20
41.55
25.50
6.70
13.40
13.40
33.50
26.80
56.30
167.50
16

LTD Saddlestitcher Parts

Transcription

Similar documents

Lotto-Systembücher - Verlag Rolf Speidel

pdf

Viel Bild für wenig Geld

Catalog - Garland Beauty Products

8//6Q oL

Vibrationskrafttraining und Gelenkstabilität

LTD SHEAR BOLTS