Gregg Distributors

Transcription

Gregg Distributors

GREGG DISTRIBUTORS LTD.
NEW PRODUCT
SUPPLEMENT CATALOGUE
4
2015
In this issue:
32 NORTH STABILicers™ — Traction Gear.............................................SP04-76
ACCUFORM SIGNS® Safety Tags............................................................SP04-77
BAFFIN Colorado Boot..............................................................................SP04-79
C.H. HANSON Marking Stamps................................................................SP04-64
CHROME TAPE MEASURE......................................................................SP04-64
DANGEROUS GOODS Placards..............................................................SP04-77
EATON AEROQUIP High Pressure Hose..................................................SP04-79
ERGODYNE® Squids™ Hard Hat Lanyard...............................................SP04-77
FASTER® Flat Face Couplings..................................................................SP04-79
GANDER BRAND TIG (Tungsten Inert Gas) Gloves................................SP04-76
GPI® Accessories....................................................................SP04-71 to SP04-72
GPI® DEF Pumps & Meter.........................................................................SP04-69
GPI® Fuel Transfer Pumps.....................................................SP04-66 to SP04-67
GPI® Hand Pumps..................................................................SP04-69 to SP04-70
GPI® Meters............................................................................SP04-70 to SP04-71
GPI® Speciality Pumps..............................................................................SP04-68
HOBART® Aluminium Electrodes...........................................SP04-61 to SP04-62
HOBART® Low Alloy Electrodes................................................................SP04-60
HOBART® Mild Steel Electrodes............................................SP04-58 to SP04-60
HOBART® Mild Steel Solid Wires..............................................................SP04-61
HOBART® Tubular Wires........................................................SP04-62 to SP04-63
JAVELIN INDUSTRIAL Fab Tools.............................................................SP04-65
KIMBERLY-CLARK Paper/Wiping Products..............................................SP04-76
KUNY’S Tool Pouches, Holders, & Carriers..............................................SP04-65
KRYLON Paint Products...........................................................................SP04-76
MECHANIX WEAR® Professional Gloves.................................................SP04-76
MILLER® Accessories.............................................SP04-26, SP04-50 to SP04-54
MILLER® Drive Rolls, Tongs, & Tips..........................................................SP04-55
MILLER® Engine-Driven Welders...........................................SP04-21 to SP04-24
MILLER® Fume Extraction.........................................................................SP04-38
MILLER® Gas Equipment.......................................................SP04-27 to SP04-37
MILLER® GTAW/TIG Welders................................................SP04-15 to SP04-19
MILLER® MIG Spool Guns.....................................................SP04-48 to SP04-49
MILLER® MIG Welding Guns..................................................SP04-45 to SP04-47
MILLER® MIG/GMAW Welders...............................................SP04-02 to SP04-06
MILLER® Multiprocess Welders..............................................SP04-06 to SP04-07
MILLER® Plasma Cutter Welders..............................................................SP04-25
MILLER® SMAW/Stick Welders..............................................SP04-13 to SP04-14
MILLER® SuitCase® Wire Feeders............................................................SP04-10
MILLER® Weldcraft™ TIG Torches............................................................SP04-20
MILLER® Weldcraft™ Tungsten................................................................SP04-19
MILLER® Welding Electrical Accessories...............................SP04-56 to SP04-57
MILLER® Welding Protection..................................................SP04-39 to SP04-43
MILLER® Wire Feeders.......................................................... SP04-11 to SP04-12
MILLER® Workstations..............................................................................SP04-44
MILLER® XMT® Multiprocess Welders....................................SP04-08 to SP04-09
MILTON Inflator Gauges............................................................................SP04-65
PRONGHORN Booster Cables.................................................................SP04-78
PRONGHORN Booster Cable Clamps......................................................SP04-78
PRONGHORN Quick Connectors..........................................SP04-78 to SP04-79
RIDGID® Red Wet/Dry Vacuum Cleaners...............................SP04-73 to SP04-75
TAPE Industrial Tape.................................................................................SP04-65
TARGET TECH Incandescent Beacons....................................................SP04-77
MILLER®
Welder Features
Output Power
Light industrial products are suitable for the home hobbyist or occasional user. They are designed to be easy to
operate, are affordably priced and typically have a 20% duty cycle and rated output of 230 amps or lower.
Industrial products are suitable for applications that do not require high-volume production. They typically have a
40 to 60% duty cycle and/or rated output of 300 amps or lower. Industrial products are an appropriate choice for
professional welders.
Heavy industrial products are suited to high-volume production and/or welding of thicker materials. They typically
have a duty cycle of 60 to 100% and a rated output of at least 300 amps. Heavy industrial products are designed
with the arc characteristics and product features professional welders demand for code-quality work.
Symbol Meanings
MLR/2777/2784
Power Icons
Unit requires singlephase input power
Unit supplies alternating current and direct
current weld output
Unit requires threephase input power
Unit supplies constantcurrent weld output
Unit supplies alternating current weld output
Unit supplies constantvoltage weld output
Unit supplies direct
current weld output
Unit supplies constantcurrent and constantvoltage weld output
Improves productivity and maneuverability by eliminating cord tangles. Reduces clean up time and
work area cord clutter. Improves safety by eliminating control cord and reducing potential trip hazard.
Improves reliability by eliminating control cord failure.
The Auto-Line circuit boosts primary power to a higher, constant voltage. Even if
incoming voltage varies widely, the circuit ensures a rock-steady welding or cutting arc.
ArcReach provides remote control at the wire feeder without needing a control cable.
Insight welding information management solutions help your operation be more
competitive and profitable by delivering accurate, decision-ready information about
your welding processes.
MIG/GMAW Welders
Millermatic® 141 & 190
•Auto-Set™ automatically provides the right settings to weld mild steel while infinite voltage control allows the flexibility to manually set your own
parameters: Set the wire diameter (.024 or .030” diameter solid steel wire), a blue light shows Auto-Set is activated; Dial in the thickness of what you’re
welding; Start welding with the exact parameters you need! •Angled cast-aluminum drive system with calibrated tension knob creates consistent
feeding and easy setup with included 10 ft. (3 m) MIG gun or optional 15 ft. (4.6 m) MIG gun •Quick Select™ drive roll makes setup quicker by offering
three grooves — two for different size solid wire and a third for flux-cored wire •Auto Spool Gun Detect™ automatically detects when a MIG gun or
spool gun is connected eliminating the need for a switch •Smooth-Start™ provides a smooth, spatter-free start. It’s the best-starting machine in the
small MIG machine category. •Thermal overload protection shuts down unit and activates the over temperature light if airflow is blocked or duty cycle
is exceeded. Automatically resets when unit cools •Uses 4” or 8” (102 or 203 mm) spools
Millermatic 190 Model Additional Features: •Miller inverter technology combines best-in-class arc characteristics with the portability of a 35-pound
machine. The arc is extremely forgiving to variations in arc length and travel speeds. •Fan-On-Demand™ power source cooling system operates only
when needed, reducing noise, energy use and the amount of contaminants pulled though the machine
Processes:
•MIG (GMAW) • Flux-Cored (FCAW)
Comes Complete with:
10-ft. (3 m) M-100 MIG gun and cable assembly (#248282), 10-ft. (3 m) work cable with clamp, 6.5-ft. (2 m) power cord with plug, Quick Select™ drive
roll for .024” (0.6 mm) or .030/.035” (0.8/0.9 mm) solid wire, and .030/.035” (0.8/0.9 mm) flux-cored wire, Flow gauge regulator and gas hose for argon
or AR/CO2 mix, two .030" contact tips, Hobart® spool of .030” solid wire, hook-and-loop cord wraps, and material thickness gauge (#229895)
Part No. 907612, Millermatic 141.
Part No. 951601, Millermatic 141 with running gear/cylinder rack.
Mild Steel Welding Capability
Aluminum Welding Capability
Model 141: Min - 24 ga. (0.8 mm) Model 141: Min - 18 ga. (1.2 mm)
Part No. 951602, Millermatic 190 with running gear/cylinder rack.
Max - 3/16” (4.8 mm) Max - 14 ga. (1.9 mm)
Part No. 300371, Spoolmate™ 100.
Part No. 301239, Running Gear/Cylinder Rack.
Max - 5/16” (7.9 mm) Max - 1/4” (6.4 mm)
Part No. 301262, Protective Cover.
Part No. 220179, .023/.024 (0.6 mm) to .035 (0.9 mm) V-groove Drive Roll.
Auto-Set™
Part No. 261157, .023/.024 (0.6 mm) to .035 (0.9 mm) V-groove and .030 (0.8 mm) to .035 (0.9 mm) V-knurl Drive Roll.
Amps Input at Rated Output, 60 Hz
Input Amperage
Machine
Only
Model No.
Rated Output
Wire Feed Speed
Wire Type and Diameter Capacity
Power
Range
Dimensions
120 V 240 V
KVA
KW
Millermatic 141 120 V 30–140 90 A at 18.5 VDC, 20
—
3.0
2.45
15– 360 IPM
Solid Steel .023 –.030” (0.6 – 0.8 mm)
20% duty cycle
(0.4 – 9.1 m/min.) Stainless .023 –.030” (0.6 – 0.8 mm) 12.5”H x 11.25”W
Flux-Cored .030 –.035” (0.8 –0.9 mm)
x 20.5”D
Millermatic 190 240 V 30–190 140 A at 21 VDC, —
21
5.0
3.8
60– 600 IPM
Solid Steel .023 –.035” (0.6 – 0.9 mm)
(318 mm x 286
40% duty cycle
(1.5 – 15.2 m/min.) Stainless .023 –.035” (0.6 – 0.9 mm)
mm x 521 mm)
Flux-Cored .030 –.035” (0.8 –0.9 mm)
SP04-2
Machine Only
Net Weight
51 lb. (23.1 kg)
35 lb. (15.9 kg)
MILLER®
MLR/2777/2784
MIG/GMAW Welders
Millermatic® 211 Auto-Set™ with MVP™
•Auto-Set makes setup quick and easy. On the Millermatic 211, it works with .030 and .035” wire. •Infinite voltage control - When used in
manual mode provides broader operating range with finer control than a tap machine. •Welds thickest material in its class - up to 3/8” (9.5
mm)! •Multi-voltage plug (MVP™) allows connection to 115 or 230-volt receptacles without tools •Heavy-duty aluminum drive system is designed to provide superior feeding and durability. The toolless, quick-change reversible drive rolls and easy-to-set scaled tension knob make
it the easiest to use in the industry. •Thermal overload protection - Designed to protect your investment, every Millermatic is now equipped
with built-in thermal overload protection. •Smooth-Start™ technology provides smooth, spatter-free starts — no pop gun starts and no spatter to clean up •”Tip saver” shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from
damage. •Uses 4 or 8” (102 or 203 mm) spools
Processes:
Max - 3/8” (9.5 mm)
Max - 3/8” (9.5 mm)
10 ft. (3 m) M-100 MIG gun and cable assembly (#248282), 10 ft. (3 m) work cable with clamp, 6 ft. (1.8 m) power cord with MVP plugs for
115 V and 230 V, Factory-installed gas solenoid valve, Dual groove quick-change drive rolls for .024” (0.6 mm) or .030/.035” (0.8/0.9 mm)
wire, Flow gauge regulator and gas hose for argon or AR/CO2 mix, extra contact tips, Hobart® spool of solid wire, information/settings chart,
and material thickness gauge (#229895)
Part No. 301239, Running Gear/Cylinder Rack.
Part No. 951375, Millermatic 211 with standard running gear/cylinder rack. Part No. 195149, Protective Cover.
Part No. 202926, V-Knurled Drive Roll.
Model No.
Input Amperage
Power
Range
120 VAC 30–140
Millermatic® 211
230 VAC 30–210
Machine
Machine
allows Only
connection
to Only
Wire Feed Speed
Wire Type and Diameter Capacity MVP
Net Weight
120 V 230 V
KVA
KW
120Dimensions
V and 230 V receptacles.
15¾”H x 10.63”W
90 A at 20 V,
20 —
2.9 2.5
Solid Steel .023 –.035” (0.6 – 0.9 mm)
60– 540 IPM
x 17½”D
20% duty cycle
74 lb. (33.6 kg)
Stainless .023 –.035” (0.6 – 0.9 mm)
(1.5
–
13.7
m/min.)
(400 mm x 270
150 A at 23.5 V,
—
24.3
5.5 4.8
Flux-Cored .030 –.045” (0.8 –1.2 mm) mm x 445 mm)
30% duty cycle
Rated Output
Millermatic® 212 Auto-Set™
•Auto-Set makes setup quick and easy. On the Millermatic 212, it works with .030 and .035”. wire •Infinite voltage control - When used in manual mode provides
broader operating range with finer control than a tap machine. •Gun-On-Demand.™ Simply pull the trigger for either gun and you’re ready to weld. No wasted
time installing modules and using gas valve kits. •Heavy-duty aluminum, two-drive-roll system •Fan-On-Demand™ cooling system only operates when needed
reducing power consumption and keeping internal components cleaner •Aluminum MIG welding with optional Spoolmate™ 200 spool gun. Wire feed speed
control on the gun saves time by reducing trips back to the machine. Also compatible with industrial Spoolmatic® spool guns.
Processes:
• MIG (GMAW) • Flux-Cored (FCAW)
15 ft. (4.5 m), 250-amp M-25 gun, 10 ft. (3 m) work cable with clamp, 7 ft. (2.1 m) power cord and plug, Flow gauge regulator and gas hose for argon or AR/CO2
mix, Factory-installed lowered running gear/cylinder rack, .030/.035” reversible dual-groove drive rolls, and extra contact tips and material thickness gauge
Part No. 951177, Millermatic 212 with Spoolmate 200, regulator, gas hose,
and dual cylinder rack.
Max - 3/8” (9.5 mm)
Max - 3/8” (9.5 mm)
Part No. 300337, Dual EZ-Change™ Low Cylinder Rack.
Part No. 300335, Elevated Gun and Cable Rack.
Part No. 300517, Full KVA Adapter Cord.
Input Amperage
Rated Output
Wire Feed Speed
Range
Power
200 V 230 V
KVA
KW
50–700 IPM
Millermatic® 212 200(208) 30–210 160 A at 24.5 VDC, 31 28 6.2 5.2
(1.3 –17.8 m/min.)
/230 V
60% duty cycle
Model No.
Solid Steel .023 –.035” (0.6 – 0.9 mm)
Stainless .023 –.035” (0.6 – 0.9 mm)
Flux-Cored .030 –.045” (0.8 –1.2 mm)
Machine Only Machine Only
Dimensions
Net Weight
30”H x 19”W x
40”D
183 lb. (83 kg)
(762 mm x 483
mm x 1,016 mm)
Millermatic® 252
•Infinite voltage control with self-calibrating digital meters that permit presetting of voltage and wire feed speed. Ensures precise parameters and accuracy. •Auto-Gun Detect™ automatically adjusts voltage, wire speed and timers for faster switching between MIG, push-pull and spool guns. Integrated
digital timers come complete with presettable preflow/postflow, burnback, spot and delay (stitch) timers. Independent timers for MIG and spool gun.
•Heavy-duty aluminum, two-drive-roll system •Fan-On-Demand™ cooling system only operates when needed reducing power consumption and keeping
internal components cleaner •Superior aluminum MIG welding with direct connection of optional XR™ push-pull guns, Spoolmatic®/Spoolmatic Pro and
Spoolmate™ 200 spool guns. No extra module to buy or install.
Processes:
Max - 1/2” (13 mm)
Max - 3/8” (9.5 mm)
15 ft. (4.5 m), 250-amp M-25 gun, 10 ft. (3 m) work cable with clamp, 10 ft. (3 m) industrial power cord (and plug on 200/230 V model), Factory-installed
gas solenoid, Flow gauge regulator and gas hose for argon or AR/CO2 mix, Factory-installed lowered running gear/cylinder rack, .030/.035” reversible
dual-groove drive rolls, and Extra contact tips
Part No. 907321, Millermatic 252. 200(208)/230 V.
Part No. 951066, Millermatic 252. 200(208)/230 V. Comes with With Spoolmatic 30A, regulator, gas hose and dual cylinder rack.
Part No. 907322, Millermatic 252. 230/460/575 V.
Part No. 951065, Millermatic 252. 230/460/575 V. Comes with With Spoolmatic 30A, regulator, gas hose and dual cylinder rack.
Part No. 300337, Dual EZ-Change™ Low Cylinder Rack.
Part No. 300335, Elevated Gun and Cable Rack.
Input Amperage
Rated Output
Wire Feed Speed
Model No.
Range
Power
200 V 230 V 460 V 575 V KVA KW
200(208)
200 A at 28 VDC, 48 42 — — 9.5 7.5
Solid Steel .023 –.045” (0.6 –1.2 mm)
50–700 IPM
Millermatic® 252 /230 V
60% duty cycle
Stainless .023 –.045” (0.6 – 1.2 mm)
30–300
(1.3
–17.8
m/min.)
230/460/
250 A at 28 VDC, — 46 23 18 9.5 7.5
Flux-Cored .030 –.045” (0.8 –1.2 mm)
575 V
40% duty cycle
(at 60% duty cycle)
Dimensions
Net Weight
30”H x 19”W x
40”D
205 lb. (94 kg)
(762 mm x 483
mm x 1,016 mm)
www.greggdistributors.ca
SP04-3
MILLER®
MLR/2777/2784
MIG/GMAW Welders
Millermatic® 350P
•Built-in Pulsed MIG programs. All programmed information is restored after each power up — aluminum/steel/stainless steel/metal-cored. •Infinite voltage control with self-calibrating digital meters that permit presetting of voltage and wire feed speed. Ensures precise parameters and
accuracy. •Auto-Gun Detect™ automatically adjusts voltage, wire speed and timers for faster switching between MIG, push-pull and spool guns
•Integrated digital timers come complete with presettable preflow/postflow and spot timers. Independent timers for MIG and push-pull guns
•Heavy-duty aluminum, four-drive-roll system •Fan-On-Demand™ cooling system only operates when needed reducing power consumption and
keeping internal components cleaner
Processes:
Model 350P: Min - 24 ga. (0.8 mm) Model 350P: Min - 18 ga. (1.2 mm)
•MIG (GMAW) • Flux-Cored (FCAW) • Pulsed MIG (GMAW-P)
Max - 1/2” (13 mm)
Max - 1/2 in. (13 mm)
15 ft. (4.5 m) Bernard™ Q300 MIG gun with Centerfire™ consumables, 10 ft. (3 m) work cable with clamp, 10 ft. (3 m) industrial power cord
(without plug) for single- or three-phase, Factory-installed gas solenoid, Flow gauge regulator and gas hose for argon or AR/CO2 mix, Factoryinstalled, low-mounted running gear/cylinder rack, .035/.045” reversible V-groove drive rolls (order U-groove drive rolls for aluminum welding),
and Extra contact tips
Part No. 907300, Millermatic 350P. 200/230/460 V.
Part No. 195299, Dual Cylinder Rack.
Input Amperage
Model No.
Rated Output
Wire Feed Speed
Range
Power
Dimensions
Net Weight
200 V 230 V 460 V KVA KW
MIG Gun
Solid Steel .023 –.045” (0.6 –1.2 mm)
34”H x 19”W x
Three-
34 30 15 11.6 11.5
50–700 IPM
Stainless .030 –.045” (0.8 –1.2 mm)
41”D
phase300 A at 32 VDC,
25–400
181 lb. (82 kg)
Millermatic®
60% duty cycle
(863 mm x 483
Single-
69 61 30 13.1 11.2 (1.3–17.8 m/min.) Aluminum .035 –.047” (0.9 –1.2 mm)
350P
Optional Spool Metal-Cored .035 –.052” (0.9 –1.3 mm) mm x 1,041 mm)
phase
Gun/Push-Pull Gun Flux-Cored .030 –.052” (0.8 –1.3 mm)
50–800 IPM
(1.3–20 m/min.)
CP-302
•Cost-effective, simple MIG power source designed for manufacturing •Large analog meters are easy to read and display preset and actual voltage
and amperage •14-pin receptacle provides a quick, direct connection to Miller® wire feeders •115-VAC power for tools and coolant systems
Processes:
•MIG (GMAW) •Flux-Cored (FCAW) •Air Carbon Arc Gouging (CAC-A)
(302 Model)
(452/652 Models)
•Industry standard for industrial MIG welding. Designed for manufacturing operations, with 100% duty cycle for extended arc-on time. •Line
voltage compensation ensures consistent weld performance even when primary power varies •Fan-On-Demand™ cooling system operates only
when needed. Reduces contaminants drawn into the machine and excess noise in work areas. •Digital meters are easy to read and display
preset and actual voltage and amperage •14-pin receptacle provides a quick, direct connection to Miller® wire feeders. Capable of remote
voltage control. •115-VAC power for tools and coolant systems •Thermal overload protection light indicates power shutdown. Helps prevent
machine damage if the duty cycle is exceeded or airflow is blocked.
Processes:
•MIG (GMAW) •Flux-Cored (FCAW) •Air Carbon Arc Gouging (CAC-A); (Deltaweld 452: 1/4” carbons) (Deltaweld 652: 3/8” carbons)
Deltaweld® SERIES
Stationary package includes:
Power source • 22A (CP-302) or S-74D (Deltaweld) feeder with .035/.045" drive rolls, Bernard™ Q300 (CP-302) or Q400 (Deltaweld)
MIG gun, Industrial MIG 4/0 kit consisting of flowmeter regulator with 10 ft. (3 m) gas hose, 10 ft. (3 m) 4/0 feeder weld cable with lugs,
and 15 ft. (4.6 m) work cable with 600-amp C-clamp.
MIGRunner™ package includes:
Items shown above plus Factory-installed standard running gear and standard cylinder rack
Power Source Only Stationary Package MIGRunner Package
Part No.
Part No.
Part No.
CP-302
200/230/460 V
903786951231951230
Deltaweld 302 200-208/230/460 V
903376951235951234
230/460/575 V
903392
—
951300
Deltaweld 452 200-208/230/460 V
903377951237951236
230/460/575 V
903394951301951302
Deltaweld 652 230/460/575 V
903396951239951238
Model
CP-302
Deltaweld
Input Power
Part No. 042886, Standard Running Gear.
Part No. 042887, Standard Cylinder Rack.
Part No. 300390, Industrial MIG 4/0 Kit (with lug connectors).
Part No. 247831025, 25 ft. Extension Cables (7.6 m)
Part No. 247831050, 50 ft. Extension Cables (15 m)
Part No. 247831080, 80 ft. Extension Cables (24.4 m)
Model
CP-302
Deltaweld 302
Deltaweld 452
Deltaweld 652
Voltage
Range
14–44
10–32
10–38
10–44
Rated Output
300 A at 32 VDC, 100% duty cycle
200 V 230 V 460 V 575 V KVA KW
38 33 16.5 — 13.1 12.3
48 42 21 17 16.9 12.9
72 63 32 25 25.1 21.1
— 96 48 38 38.2 34.2
Open-Circuit
Dimensions
Voltage
(Includes lift eye and strain relief)
30”H x 23”W
14– 44 VDC
(762 mm x 585 mm)
42 VDC max.
302: 30.5”D (775 mm)
48 VDC max.
452/652: 38”D (966 mm)
54 VDC max.
Please see pg. SP04-02 for more information
about the Miller Welding icons and symbols.
SP04-4
Net Weight
332 lb. (151 kg)
323 lb. (147 kg)
384 lb. (174 kg)
472 lb. (214 kg)
MILLER®
MLR/2777/2784
MIG/GMAW Welders
Millermatic® 350P ALUMINUM
•True torque feed motor push-pull design provides continuous push force to the wire while the gun motor controls the speed at the gun. The
motors work together to provide accurate and positive wire feed speed without wire shaving or deformation. •Electronic wire spool brake allows
wire spool to free spool while welding resulting in smooth wire delivery •Built-in aluminum Pulsed MIG programs for simplicity and improved
puddle control. Pulsed welding virtually eliminates burnthrough and warping issues on thinner materials. •Synergic MIG and Synergic Pulsed
MIG provide communication between power source, feeder and gun. As wire speed increases/decreases, the pulse or MIG parameters also
increase/decrease to match the right amount of power needed. •Trigger schedule select allows operator to change between two sets of weld
parameters •Trigger hold reduces operator fatigue on extended welds •Standard jog and purge
Processes:
• Aluminum MIG (GMAW) • Aluminum Pulsed MIG (GMAW-P)
10 ft. (3 m) work cable with clamp, 10 ft. (3 m) industrial power cord (without plug) for single- or three-phase, Factory-installed gas solenoid,
Flow gauge regulator and gas hose for argon, Factory-installed, low-mounted running gear/cylinder rack, and .035- and .047” (0.9 and 1.2 mm)
U-groove drive rolls for aluminum welding
Part No. 907474, Millermatic 350P Aluminum standard unit.
Part No. 951451, Millermatic 350P Aluminum with 15-ft. XR-Aluma-Pro™ air-cooled gun.
Part No. 951452, Millermatic 350P Aluminum with 25-ft. XR-Aluma-Pro™ air-cooled gun.
Part No. 951453, Millermatic 350P Aluminum with 25-ft. XR™-Pistol Pro air-cooled gun.
Part No. 951454, Millermatic 350P Aluminum with 25-ft. XR-Aluma-Pro™ Lite air-cooled gun
Part No. 195299, Dual Cylinder Rack.
Input Amperage
Model No.
Rated Output
Wire Feed Speed
Range
Power
200 V 230 V 460 V KVA KW
Optional
Spool
Aluminum
.035 –.047” (0.9 –1.2 mm)
Three-
34 30 15 11.6 11.5
Millermatic®
300 A at 32 VDC,
Gun/Push-Pull Gun
phase
25–400
60% duty cycle
50–800 IPM
350P Aluminum Single-
69 61 30 13.1 11.2
(1.3–20 m/min.)
phase
Dimensions
Net Weight
34”H x 19”W x
41”D
181 lb. (82 kg)
(863 mm x 483
mm x 1,041 mm)
Invision™ MPa PLUS SYSTEM
•MIG and synergic Pulsed MIG system with optimized weld programs for both steel and aluminum •Built-in MIG and Pulsed MIG programs automatically
set the optimal parameters for a wide variety of wires making it easy to set up and use •Synergic Pulsed MIG. As wire speed increases/decreases, pulse
parameters also increase/decrease to match the right amount of power needed, eliminating the need to make additional adjustments •Profile Pulse™
provides TIG appearance with MIG simplicity and productivity. Achieve ”stacked dimes” without gun manipulation. Profile Pulse frequency can be changed
to increase or decrease the spacing between the ripple pattern to achieve the desired weld appearance. •Invision 352 model allows for any input voltage
hookup (208–575 V) with no manual linking. 450 model is 230/460 V manual link or 575 V, three-phase only. •Easy to set up. Select wire diameter, wire
type and gas being used, set your wire speed and strike an arc. •Wind Tunnel Technology.™ Internal air flow that protects electrical components and PC
boards from dirt, dust, debris... greatly improving reliability. •Fan-On-Demand™ cooling system operates only when needed, reducing noise, energy use
and amount of contaminants pulled through machine
Processes:
•MIG (GMAW) • Flux-Cored (FCAW) • Pulsed MIG (GMAW-P) • Air Carbon Arc Gouging (CAC-A); (Invision 352: 1/4” carbons) (Invision 450: 5/16” carbons)
Part No. 907431, Invision 352 MPa Power Source Only. 208–575 V.
Part No. 907431001, Invision 352 MPa Power Source Only. 208–575 V with auxiliary power.
Part No. 907485, Invision 450 MPa Power Source Only. 230/460 V with auxiliary power.
Part No. 907486, Invision 450 MPa Power Source Only. 575 V with auxiliary power.
Part No. 195445, MIGRunner™ Cart (single feeders only).
Part No. 300408, Running Gear Cylinder Rack.
Part No. 043007, Coolmate™ 3.
Part No. 300405, Industrial MIG 4/0 Kits with Dinse connectors (352 MPa only).
Part No. 300390, Industrial MIG 4/0 Kits with lug connectors (450 MPa only).
Part No. 247831025, 25 ft. (7.6 m) Extension Cables.
Part No. 247831050, 50 ft. (15 m) Extension Cables.
Package Includes
Model
Invision 352
MPa
Invision 450
MPa
Package
Part No.
951287
951501
951411
951500
951499
951457
70 Series MPA Plus Feeder with Bernard™ Q400 XR-Aluma-Pro™ Plus
Push-Only MIG Gun and .035/.045 Drive Rolls
Push-Pull MIG Gun
S-74 (single-wire feeder with one gun)
25-ft. air-cooled
D-74 (dual-wire feeder with two guns)
25-ft. air-cooled
—
—
—
—
Input Amp/Volt
Rated Output
KVA
Range
Power
208 V 230 V 400 V 460 V 575 V
Three- 5 – 425 A 350 A at 34 VDC, 40.4 36.1 20.6 17.8 14.1 14.2
Invision 352
phase 10 – 38 V 60% duty cycle
MPa
Single- 5 – 425 A 300 A at 32 VDC, 60.8 54.6 29.7 24.5 19.9 11.7
Invision 450
Three- 15–600 A 450 A at 36.5 VDC, — 49.4 — 27.2 23.6 21.6
MPa
phase 10 – 38 V 100% duty cycle (23.5 on
575 V)
Model No.
KW
Industrial MIG 4/0 Kit
13.6
11.2
18.3
75 VDC
90 VDC
Invision 352
MPa
Invision 450
MPa
Cart
With Dinse connectors
With lug connectors
With lug connectors
Max. OpenCircuit Voltage
(Invision 450 is 3-phase only.)
MIGRunner cart
Aluminum
Running gear cylinder rack
MIGRunner cart
Steel
MIGRunner cart
Dimensions
Net Weight
17”H x 12.5”W
x 24”D
80 lb. (36.3 kg)
(432 mm x 318
mm x 610 mm)
17.25”H x 14.5”W x
27.125”D
(438 mm x 368 mm x 122 lb. (55.3 kg)
689 mm)
SP04-5
MILLER®
MLR/2777/2784
MIG/GMAW Welders
AlumaFeed™ SYNERGIC ALUMINUM WELDING SYSTEM
•AlumaPower™ 350 model allows for any input voltage hookup (208–575 V) with no manual linking. 450 model is 230/460 V manual link or 575
V, three-phase only •Synchronized, true push-pull wire feed system for precise wire feeding and arc performance •Profile Pulse™ provides TIG
appearance with MIG simplicity and productivity. Achieve ”stacked dimes” without gun manipulation. Profile Pulse frequency can be changed
to increase or decrease the spacing between the ripple pattern to achieve the desired weld appearance. •Synergic Pulsed MIG. As wire speed
increases/decreases, pulse parameters also increase/decrease to match the right amount of power needed, eliminating the need to make
additional adjustments. •Built-in MIG and Pulsed MIG programs automatically set the optimal parameters for a wide variety of wires making it
easy to set up and use •Parameter and system locks enhance quality assurance and protect weld consistency •Trigger schedule select allows
operator to change between two sets of weld parameters
Processes:
•Aluminum MIG (GMAW) • Aluminum Pulsed MIG (GMAW-P)
Part No. 043810, Coolant.
Part No. 907420, AlumaPower 350 MPa Power Source Only. 208–575 V.
Part No. 300405, Industrial MIG 4/0 Kits with Dinse conPart No. 907420001, AlumaPower 350 MPa Power Source Only. 208–575 V
nectors (350 MPa only).
with auxiliary power.
Part No. 907483, AlumaPower 450 MPa Power Source Only. 230/460 V with auxiliary power. Part No. 300390, Industrial MIG 4/0 Kits with lug connectors (450 MPa only)
Part No. 907484, AlumaPower 450 MPa Power Source Only. 575 V
with auxiliary power.
Part No. 247831050, 50 ft. (15 m) Extension Cables.
Part No. 195445, MIGRunner™ Cart.
(AlumaPower 450 is 3-phase only.)
Package Includes
Model
AlumaPower
350 MPa
AlumaPower
450 MPa
Package XR-AlumaFeed Feeder XR-Aluma-Pro™ Plus
Part No.
Part No.
Push-Pull MIG Gun
951147300509
25-ft. air-cooled
951149300509
—
951151300509
25-ft. air-cooled
951460300509
25-ft. air-cooled
951459300509
25-ft. air-cooled
951558300509
—
951559300509
25-ft. water-cooled
XR™-Pistol Grip
Push-Pull MIG Gun
—
30-ft. air-cooled
—
—
—
30-ft. water-cooled
—
Industrial MIG 4/0 Kit Coolmate™ with
Coolant
—
—
—
—
—
—
—
With lug connectors
—
—
Coolmate 3
With lug connectors
Coolmate 3
Note: All packages listed include gun drive rolls, feeder drive rolls and consumables for .035 and 3/64” (0.9 and 1.2 mm) wire.
All systems come set up out of the box to run 3/64” wire. 1/16” consumables not included.
Input Amp/Volt
Rated Output
KVA
Range
Power
208 V 230 V 400 V 460 V 575 V
Three- 5 – 425 A 350 A at 34 VDC, 40.4 36.1 20.6 17.8 14.1 14.2
AlumaPower
350 MPa
Single- 5 – 425 A 300 A at 32 VDC, 60.8 54.6 29.7 24.5 19.9 11.7
AlumaPower Three- 15–600 A 450 A at 36.5 VDC, — 49.4 — 27.2 23.6 21.6
450 MPa
phase 10 – 38 V 100% duty cycle (23.5 on
575 V)
Model No.
Input Welding Circuit
Rating
KW
Max. OpenCircuit Voltage
13.6
11.2
18.3
75 VDC
90 VDC
Cart
—
—
MIGRunner cart
—
MIGRunner cart
—
MIGRunner cart
Dimensions
Net Weight
17”H x 12.5”W
x 24”D
80 lb. (36.3 kg)
(432 mm x 318
mm x 610 mm)
17.25”H x 14.5”W x
27.125”D
(438 mm x 368 mm x 122 lb. (55.3 kg)
689 mm)
Maximum Spool
Size Capacity
24 VAC, 5 A, 400 A at 100% duty cycle
50– 900 IPM .035 –.062" (0.9 – 1.6 mm) Requires wire kit
12" (305 mm)
XR-AlumaFeed
50/60 Hz
System duty cycle is limited (1.3–22.9 m/min.) #230708 for gun and drive roll kit #195591 for control Wire Feeder*
to gun rating.
box to run 1/16” (1.6 mm) wire
Model No.
Input Power
Wire Feed Speed
Wire Diameter Capacity
Dimensions
Net Weight
16”H x 9.5”W
x 21.25”D
(406 mm x 241
mm x 540 mm)
42.5 lb.
(19.2 kg)
*14-pin compliant, but only operates synergically with MPa power sources
Multiprocess Welders
Multimatic™ 200
•The only all-in-one, portable, multiprocess power source from Miller® is highly versatile •Weighing only 29 lbs. (13.2 kg) and running on either 120 or
230 volts, the Multimatic 200 can go anywhere you need to MIG, TIG or Stick weld •Multi-voltage plug (MVP™) allows connection to 115 or 230-volt
receptacles without tools •Auto-Set™ Elite can be used on multiple materials and multiple processes with the ability to fine-tune your settings. Simple to
set up and use! •Excellent arc characteristics! Unit offers positive arc starts and an extremely stable arc with minimal spatter on both mixed gases and
straight CO2. •Impact-resistant case provides strength and durability while protecting the internal components and welding wire
Processes:
•MIG (GMAW) •Flux-Cored (FCAW) •DC Stick (SMAW) •DC TIG (DC GTAW)
10-ft. (3 m) Bernard™ Q150 MIG gun, 13 ft. (4 m) cable with electrode holder and 25 mm Dinse connector, 10 ft. (3 m) work cable with clamp and 25 mm
Dinse connector, Power cord with MVP plugs for 115 V and 230 V, Quick Select™ drive roll for .024” (0.6 mm) or .030/.035”(0.8/0.9 mm)
solid wire, and .030/.035” (0.8/0.9 mm) flux-cored wire, Flow gauge regulator and gas hose for argon or AR/CO2 mix, extra contact tips,
information/settings chart and material thickness gauge (#229895)
Part No. 907518, Multimatic™ 200. 120/230 V.
Part No. 300507, 14-Pin to 6-Pin Adapter Cord.
Part No. 195184, RCCS-6M Remote Fingertip Control.
Input Amperage
Welding
Range
Mode/Process Power
CV: MIG/
120 VAC 30–140
Flux-Cored
230 VAC 30–200
CC: TIG
120 VAC
5–150
230 VAC
5–150
CC: Stick
120 VAC 20–150
230 VAC 20–150
SP04-6
Rated Output
Amps Input at Rated Output, 50/60 Hz
120 V
90 A at 18.5 V, 60% duty cycle
18 110 A at 19.5 V, 20% duty cycle 20 150 A at 21.5 V, 20% duty cycle — 150 A at 16 V, 30% duty cycle
27 150 A at 16 V, 30% duty cycle
—
100 A at 24 V, 35% duty cycle
24 150 A at 26 V, 30% duty cycle
—
230 V
—
—
17.5 —
13.8 —
20.8 KVA
2.2 2.7 4.0 3.3 3.2 2.9 4.8 Wire Feed Speed Max. Open-Circuit Voltage Dimensions Net Weight
KW
2
70– 425 IPM
90 VDC
14.5”H x 9.75”W29 lb. (13.2 kg)
2.6 (1.8–10.8 m/min.)
x 17”D
3.8
(368 mm x
3.2
90 VDC (22 – 25 VDC,
248 mm x
3.0
sense voltage for Stick and 432 mm)
2.8
Lift-Arc™ TIG)
4.5
MILLER®
MLR/2777/2784
Multiprocess Welders
Shopmate™ 300 DX
•An economical single-phase DC multiprocess power source that provides versatility and outstanding arc performance in CV
mode (MIG) and CC mode (Stick and TIG) •Process selector switch is an ”operator-friendly” single process switch that eliminates
the confusion of several switch combinations •Digital meters for presetting or monitoring voltage and amperage •Built-in 10-pin
connector for direct hookup of Spoolmatic® spool guns and built-in 14-pin connector for direct hookup of 14-pin, Miller wire feeders
and accessories •Fan-On-Demand™ cooling system operates only when needed •Line voltage compensation keeps welding
parameters constant •Arc control adjusts inductance in MIG mode and DIG in Stick mode to optimize weld performance •Lift-Arc™
start provides DC TIG arc starting without the use of high frequency. Starts the arc without contaminating the weld with tungsten.
Processes:
•MIG (GMAW) •Flux-Cored (FCAW) •DC Stick (SMAW) •DC TIG (DC GTAW)
MIG Package Comes Complete with:
22A wire feeder with Bernard™ gun, Shopmate 300 MIG kit consisting of flow gauge regulator and 10 ft. (3 m) gas hose for argon or
AR/CO2 mix, 10 ft. (3 m) 1/0 interconnecting cable, 15 ft. (4.6 m) 1/0 work cable with clamp, and consumable storage box.
Part No. 907315, Shopmate™ 300 DX. 200(208)/230 V Machine only.
Part No. 907316, Shopmate™ 300 DX. 230/460/575 V Machine only.
Part No. 951076, Shopmate™ 300 DX. 200(208)/230 V with MIG package.
Part No. 951077, Shopmate™ 300 DX. 230/460/575 V with MIG package.
Part No. 300145, Shopmate Running Gear/Dual Cylinder Rack.
Part No. 300150, Shopmate 300 MIG Kit .
Amperage
Range
Voltage
Range
5 – 400
10 – 35
Rated Output
250 A at 30 VDC,
60% duty cycle
Max. OpenDimensions
Net Weight
208 V 230 V 460 V 575 V KVA KW Circuit Voltage (Includes lift eye)
24.5”H x 19”W x 177 lb. (80.3 kg)
66 57 29 23 13 11.2
80 VDC
25.5”D (622 mm x
483 mm x 648 mm)
PipeWorx WELDING SYSTEM
Simple process setup: •The front panel was designed by welders for welders •Requires just a few basic steps to set up a new
weld process, resulting in less training time and minimizing errors from incorrect setups •Memory feature stores four programs for
each selection: Stick, DC TIG, and MIG (left and right side of feeder). Eliminates the need to remember parameters
True multiprocess machine: •Weld processes are optimized to deliver superior arc performance and stability specifically for root,
fill, and cap passes on pipe •RMD and Pulsed MIG increase quality and productivity
Quick process changeover: •Simply push a process selection button to choose a welding process •Eliminates set-up time and
reduces the risk of weld reworks due to incorrect cable connections •PipeWorx ”Quick Select” technology automatically selects the
welding process, the correct polarity, cable outputs, gas solenoid, and user-programmed welding parameters
Single-system design: •One machine designed to perform all of your pipe welding needs •Simplified and optimized specifically for
pipe welding
Processes:
•Stick (SMAW) •DC TIG (GTAW) (HF and Lift-Arc™) •MIG (GMAW) •Flux-Cored (FCAW) •RMD •Pulsed MIG (GMAW-P)
Power source with cable hangers, Running gear with gas cylinder rack and handles, Dual feeder with drive rolls, Cable kit with 25 ft.
(7.6 m) work sense lead, and Two 15 ft. (4.6 m) PipeWorx 300 guns
Part No. 951381, 230/460 V PipeWorx Welding System
Part No. 951382, 575 V PipeWorx Welding System
Part No. 907382, 230/460 V PipeWorx Power Source only
Part No. 907384, 575 V PipeWorx Power Source only
Part No. 300365, Single-wire PipeWorx Feeder model only
Part No. 300366, Dual-wire PipeWorx Feeder model only
Part No. 057607, Single/dual feeder (left) Spool Cover.
Part No. 090389, Dual feeder (right) Spool Cover.
Part No. 194744, RFCS-14 HD Foot Control.
Part No.
Input
Power
Welding
Mode/
Process
951381
230/460 V
CC: Stick
951382
907382
907384
24 VAC,
11 A
230 V 460 V
575 V
40– 400 A 400 A at 36 VDC
43.9
26.6
22.4
17.5
21.2
22.3
16.1
16.3
16.4
575 V
CC/DC: TIG 10– 350 A 350 A at 24 VDC
230/460 V CV: MIG/
10– 44 V 400 A at 34 VDC
Flux-Cored
575 V
29.3
18.2
13.5
11.8
14.5
13.4
10.7
10.6
10
42.9
24
20.5
17.3
19.2
20.5
16
15.8
16.2
100 V, 750 A at
100% duty cycle
Rated Output
at 100% Duty
Cycle
Amps Input at Rated
Output, 60 Hz, 3-Phase
Max. OpenCircuit
Voltage
230 V 460 V 575 V 230 V 460 V 575 V
PipeWorx Feeder
Input
Input Welding
Power
Circuit Rating
Amp/
Voltage
Ranges
Wire Feed Speed
Wire Diameter
Capacity
Maximum Spool
Size Capacity
50–780 IPM
(1.3 –19.8 m/min.)
.035 –.062”
(0.9 – 1.6 mm)
60 lb. (27 kg)
KVA
Dimensions
KW
90 VDC
Dimensions
28.5”H x 19.5”W x
31.75”D (724 mm x
495 mm x 806 mm)
Net
Weight
225 lb.
(102 kg)
Net Weight
14”H x 19”W x 29”D
Single 65 lb. (29.5 kg)
(356 mm x 483 mm
Dual 90 lb. (41 kg)
x 737 mm)
SP04-7
MILLER®
MLR/2777/2784
®
XMT Multiprocess Welders
XMT® SERIES WELDERS
Portability and excellent multiprocess arc performance make the XMT family the most popular in the industry.
(XMT 450 is 3-phase only.)
With many models to choose from the XMT family has the right solution for your business.
Input Power Choices: •Auto-Link® (304 model) automatically links the power source to primary voltage being applied (230/460 VAC, single- or three-phase). (350 models) allows for any input
voltage hookup. (208–575 VAC, single- or three-phase) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable input power. •Standard hookup (450
models). Available as 230/460 VAC manual link or 575 VAC models, three-phase only.
Advanced Features for the Professional Welder: •Adaptive Hot Start™ makes starting stick electrodes easy without creating an inclusion •Infinite
arc control available in the Stick and Wire modes for easier fine tuning of tough-to-weld materials and out-of-position applications •Lift-Arc™ provides
arc starting that minimizes contamination of the electrode and without the use of high frequency •Welding Information Management System. XMT
14-pin models are Insight capable to monitor weld voltage, amperage, and arc-time and percentage.
Reliability: •Wind Tunnel Technology.™ Internal air flow that protects electrical components and PC boards from dirt, dust, debris... greatly improving
reliability •Fan-On-Demand™ cooling system operates only when needed, reducing noise, energy use and amount of contaminants pulled through
machine
Welder Friendly Control Panel: •Process selector switch reduces the number of control setup combinations without reducing any features •Ultratough, polycarbonate-blended cover protects front controls from damage •Large, dual digital meters are easy to view and presettable to ease setting
weld output
Output Connector Choices: •Dinse- or Tweco®-style weld disconnects (304/350 models) provide high-quality weld cable connections. (Note: Two
Dinse connectors are supplied with each Dinse machine. Tweco connectors must be ordered separately.) •Studs (450 models)
Processes:
•MIG (GMAW) •Pulsed MIG (GMAW-P)* •Stick (SMAW) •TIG (GTAW) •Flux-Cored (FCAW) •Air Carbon Arc Cutting and Gouging (CAC-A) (Carbons — 304: 1/4”, 350: 5/16”, 450: 3/8”)
*Only XMT CC/CV models with optional control and XMT MPa models.
XMT® 304 CC/CV
•Cost-effective multiprocess machine.
•Auto-Link® automatically links the power source to primary voltage being applied (230 or 460
VAC, single– or three-phase).
Part No. 951343, 208-230/460 V MIGRunner w/22A*.
XMT® 350 VS
•This simplified version is ideal for construction or fabrication applications in which the 14-pin
receptacle is not needed for remote control or 14-pin feeders.
Part No. 907224, 208–575 V.
XMT® 350 CC/CV & 450 CC/CV
•Flexibility and simplicity make this the most popular model. It has the core multiprocess capabilities along with the flexibility of a 14-pin for spool guns, feeders, and remote controls. •Stronger
weld output for increased capabilities. The XMT 350 provides 24% more output than the 304
model for larger wires and stick electrodes. The XMT 450 provides 43% more output for Carbon
Arc Gouging.
XMT 350 CC/CV (Dinse)
Part No. 907161, 208–575 V.
Part No. 907161-01-1, 208–575 V w/auxiliary power.
Part No. 951549, 208–575 V with SuitCase XT 12VS*.
Part No. 951327, 208–575 V MIGRunner with 22A*.
Part No. 951314, 208–575 V MIGRunner with S-74D*.
XMT 450 CC/CV (1/2" stud)
Part No. 907481, 230/460 V.
Part No. 907482, 575 V.
XMT® 350 MPa & 450 MPa
•Built-in pulse programs for manufacturing and fabrication applications that have benefits for
standard steels, high-strength steels and aluminum •Pulse programs provide reduced heat
affected zone, weld in all positions, great for thick-to-thin metal, good gap filling ability and faster
travel speeds and deposition •SharpArc® controls the arc in Pulsed MIG mode and gives total
control over the arc cone shape, puddle fluidity and bead profile
Additional features when using a 70 Series MPa Plus feeder or XR-AlumaFeed™ feeder.
•Synergic Pulsed MIG — As you increase/decrease the wire feed speed, the pulse parameters increase/decrease, matching the right amount of power output to match the wire speed,
eliminating the need to make additional adjustments •Profile Pulse™ provides TIG appearance
with MIG simplicity and productivity. Achieve "stacked dimes” without gun manipulation. Profile
Pulse frequency can be changed to increase or decrease the spacing between the ripple pattern
to achieve the desired weld appearance. •Added capabilities with Insight Core™. When using
an MPa Plus feeder, wire deposition is added to the Insight Core capabilities
XMT 350 MPa
Part No. 907366, 208–575 V.
Part No. 907366-01-1, 208–575 V w/auxiliary power.
Part No. 907366-01-4, 208–575 V w/Tweco.
XMT 450 MPa (1/2" stud)
Part No. 907479, 230/460 V.
Part No. 907479001, 230/460 V with auxiliary power.
Part No. 907480, 575 V.
Part No. 907480001, 575 V with auxiliary power.
*Feeders include gun and drive rolls. MIGRunners add Industrial MIG 4/0 Kit and MIGRunner Cart.
SP04-8
XMT® 350 & 450 ArcReach™ Systems
•Remote control of the power source without a cord. With an ArcReach-equipped SuitCase®
feeder and power source you can change the output voltage at the feeder, and save a trip to the
power supply. No extra control cable to purchase, maintain, string or unstring— saving time and
money. •More arc-on time and reduced exposure to workplace hazards for operators can be
realized using ArcReach because less time is spent going back to the XMT to set process and
arc voltage •Automatic process select to MIG/FCAW (with gas) if DCEP is detected or FCAW
(no gas) if DCEN is detected, when ArcReach communication is established between the feeder
and the XMT. Reduces need to access XMT •Automatic return to panel settings on XMT when
ArcReach communication is terminated. For example, if the XMT is set to gouging at 350 amps
and an ArcReach feeder is connected, the XMT will go to a MIG/FCAW process. If the feeder
is disconnected, the XMT will go back to its previous setting (gouging at 350 amps). •Less
operator fatigue by not needing to move or reposition both heavy secondary weld leads bundled
with control cords on the worksite. Control cables are not used. •Operator can precisely set arc
voltage at the feeder and monitor the actual arc voltage and current delivered to the weld using
the digital meters on the feeder. This removes guesswork when it comes to adhering to weld
procedures. •Remote override of XMT. When an ArcReach feeder is connected to an XMT the
feeder has full control and the XMT controls are disabled. •Save time by no longer needing to
troubleshoot welding system problems that result from damaged control cords •Eliminate costly
control cord repairs because control cords are not used •Fleet compatibility. Works with any
SuitCase feeder, but ArcReach benefit is realized with the ArcReach system.
Part No. 907224002, XMT 350 ArcReach (Tweco®). 208–575 V.
Part No. 907481002, XMT 450 ArcReach (1/2" stud). 230/460 V.
MILLER®
MLR/2777/2784
®
XMT Multiprocess Welders
XMT SERIES WELDERS
®
Input
Power
Model
XMT 304 CC/CV
1-phase
XMT 350 CC/CV
3-phase
XMT 350 VS (no remote control)
XMT 350 MPa
XMT 350 ArcReach
XMT 450 CC/CV
1-phase
3-phase
XMT 450 MPa
XMT 450 ArcReach
Max.OpenCircuit
Voltage
90 VDC
75 VDC
Amp/Volt
Ranges
5–400 A
10–35 V
5–425 A
10–38 V
5–425 A
10–38 V
15–600 A
10–38 V
Rated Output
300 A at 32 VDC, 60% duty cycle**
90 VDC
450 A at 36.5 VDC, 100% duty cycle
Dimensions
Net Weight
17”H x 12.5”W x 24”D
79.5 lb. (36.1 kg)
(432 mm x 318 mm x 610 mm)
17”H x 12.5”W x 24”D
80 lb. (36.3 kg)
(432 mm x 318 mm x 610 mm)
17.25”H x 14.5”W x 27.125”D
(438 mm x 368 mm x 689 mm)
122 lb. (55.3 kg)
**Duty cycle rating below achieved with 6-gauge input power cord (8-gauge cord supplied with unit).
Most popular accessories for all models
Part No. 042537, Cylinder Cart.
Part No. 300405, Industrial MIG 4/0 Kit for XMT 304/350.
Part No. 195445, MIGRunner™ Cart.
Part No. 300390, Industrial MIG 4/0 Kit for XMT 450.
Part No. 300408, Running Gear Cylinder Rack. Part No. 195478, Protective Cover (XMT 304/350 only).
Part No. 195286, Gas Valve Kit for XMT 350.
Part No. 300928, Gas Valve Kit for XMT 450.
Most popular accessories for non-VS models:
Part No. 300509, XR-AlumaFeed™ Feeder for aluminum .
Part No. 043389, Optima™ MIG Pulse Control.
XMT® RACKS
•XMT Rack conveniently houses multiple power sources for multiple welders. This is an ideal system for onsite applications including construction and
shipbuilding. •Custom build your own rack by mix and matching XMT 304 CC/CV, 350 CC/CV, 350 VS, 350 MPa, 450 CC/CV and 450 MPa. (Rack holds
a maximum of four of the XMT 450 models.) •All racks with factory-equipped power sources include fuses to provide primary power line protection for
each inverter power supply on 460 or 575 VAC. (XMT 304 and 350: 20-amp fuses, XMT 450: 30-amp fuses.) Four-rack and six-rack models are available and come with two lift eyes for transportation and rugged skids for dragging or pushing. •Lift truck side and end pockets in base for forklift loading
and worksite repositioning. Rack roof panel and power source shelves are fabricated from galvanized steel and painted for added protection in harsh
environments. •Liquid-tight strain reliefs designed to resist salt water, alcohol, oil, grease and common solvents are provided on both the welding power
source and electrical junction box •Isolated work terminal provides a connection point for common workpiece construction •Meets IP23 which is more
stringent than IP23S or IP23M ratings •One connection allows up to six inverters to be connected with one primary power drop
Model No.
4 Units
Part No.
Style
6 Units
Part No.
Style
Input Power to Rack
Dimensions
(Includes lift eye)
XMT 304 CC/CV Rack
907292 Dinse
907291
Dinse
3-phase, 230/460 VAC, 60 Hz (20 A fuses included)
59.375”H x 43”W x
XMT 350 VS Rack ——
907228
Tweco® 3-phase, 208 – 575 VAC, 50/60 Hz (20 A fuses included)
34.375”D
XMT 350 CC/CV Rack 907231
Dinse
907232
Dinse
(1,508 mm x 1,092
907407
Tweco®
907406
Tweco®
mm x 873 mm)
XMT 450 CC/CV Rack 907607 1/2” studs
—
—
3-phase, 230/460 VAC, 60 Hz (30 A fuses included)
907608 1/2” studs
—
—
3-phase, 575 VAC, 60 Hz (30 A fuses included)
Empty Rack195466 - Can contain XMT 304 or 350 (6 units); XMT 450 (4 units).
Net Weight
4 Units: 560 lb. (254 kg)
6 Units: 712 lb. (323 kg)
4 Units 599 lb. (272 kg)
6 Units 759 lb. (344 kg)
780 lb. (354 kg)
279 lb. (127 kg)
SP04-9
MILLER®
MLR/2777
®
SuitCase Wire Feeders
SuitCase® SERIES PORTABLE FEEDERS
Use with CC (except 12RC model) and CV, DC power sources.
Portable SuitCase feeders that set the standard for performance and provide extreme reliability to stand up to the demands of construction and fabrication.
Setting the standard for performance: •Heavy-duty drive motor with tachometer control provides wire feed speed that is accurate and consistent from the start of the weld to the finish and from
one weld to the next. Consistent wire feed speed is very important with large-diameter cored wire, because small changes in wire feed speed make large changes in deposition rates. •Front panel
has trigger hold, wire jog, and gas purge for easy operator access. (X-TREME™ feeders only.) •Wide voltage range for small and large wires with no contactor chatter or arc outages •Ultra-low
drag inlet guide pins make loading the wire easy and does not deform the wire on the way into the drive rolls improving wire feeding performance •Scaled wire pressure knob provides easy adjustment and consistent pressure on the drive rolls and wire •Digital meters with SunVision™ technology can display voltage, wire feed speed, and also amperage if desired. Meters can be seen
clearly even in direct sunlight. (Meters are optional on 8VS.)
Unique and durable case: •Impact-resistant, flame-retardant case provides strength and durability, and protects components and welding wire from moisture, dust and other contaminants •Builtin slide rails allow you to drag the feeder into position for welding •Innovative feeder door design allows you to change wire while feeder is standing upright or laying down •Case is available in two
sizes. (X-TREME™ feeders only.)
Extreme reliability: •Potted and trayed main printed circuit board for the harshest environments adds exceptional reliability. Board has full-trigger isolation so a shorted gun trigger will not affect
feeder operation. •Gun locking tab works with guns having corresponding locking grooves to prevent gun from being pulled out if the feeder is dragged by the gun •Gas inlet recessed into back of
case is protected from incidental contact by the weld cable, ensuring consistent and contaminant-free shielding gas delivery to the gun. Double-filtered gas valve helps keep dirt from clogging and
affecting gas flow.
SuitCase® X-TREME™ 8VS & 12VS
•Voltage-sensing feeders designed to run off of arc voltage from
almost any welding power source •8VS model is sized for an
8” spool of wire, can be carried
to remote welding sites and fits
through a 14” manhole/manway
•12VS model is sized for an 8 or
12” spool of wire •12” spools are
the most common in structural
steel and fabrication
SuitCase® X-TREME™ 8VS & 12VS
ArcReach™
•Remote control of the power source without a cord •With an
ArcReach-equipped SuitCase®
feeder and power source you
can change output voltage at
the feeder, and save a trip to the
power supply. •No extra control
cable to purchase, maintain,
string or unstring—saving time
and money
SuitCase® 12RC
•Standard remote voltage control saves the operator a trip back
to the power supply for welding adjustments •For applications
where the feeder is within 100
feet of the power source and
control cords are acceptable
Processes:
• MIG (GMAW) • Flux-Cored (FCAW)
Bernard™Q300 MIG gun with reversible dual size (.045 and 1/16”) VK drive rolls. 12VS model is also available with Dura-Flux™Flux-Cored gun
with reversible dual size (.068/.072 and 5/64”) VK drive rolls. ArcReach™models are also available with Bernard S-Gun™ with reversible dual size
(.045 and 1/16”) VK drive rolls.
Part No. 951583, SuitCase X-TREME 8VS with Bernard Q300 gun (no meters).
Part No. 951582, SuitCase X-TREME 8VS with Bernard Q300 gun
Part No. 951543, SuitCase X-TREME 12VS with Bernard Q300 gun
Part No. 951544, SuitCase X-TREME 12VS with Bernard Dura-Flux gun
Part No. 951588, SuitCase X-TREME 8VS ArcReach with Bernard S-Gun
Part No. 951584, SuitCase X-TREME 8VS ArcReach with Bernard Q300 gun
Part No. 951589, SuitCase X-TREME 12VS ArcReach with Bernard S-Gun
Part No. 951581, SuitCase X-TREME 12VS ArcReach with Bernard Q300 gun
Part No. 951580, SuitCase 12RC with Bernard Q300 gun
Part No. 951599, SuitCase 12RC with Bernard Q300 gun, lift eye, and flowmeter
SUGGESTED POWER SOURCES
•Invision™ MPa Series •Dimension™ Series •XMT® Series (VS model not compatible with RC feeder) •Bobcat™ Series •Trailblazer® Series •Big Blue® Series
Note: Full functionality of ArcReach is only available with ArcReach power sources. RC feeder requires power source with 14-pin connector.
SUGGESTED GUNS
•Bernard™ Q300 (GMAW) •Bernard™ S-Gun™ (GMAW) •Bernard™ Dura-Flux™ (FCAW) •Roughneck® (GMAW) • Ironmate™ FC-1260 (FCAW)
Model No.
Input Power
SuitCase X-TREME 8VS
Operates on openSuitCase X-TREME 12VS
circuit voltage and
arc voltage: 14– 48
VDC/110 Max. OCV
ArcReach
ArcReach
24 VAC, 10 A,
SuitCase 12RC
50/60 Hz
Input Welding
Circuit Rating
Wire Feed Speed
330 A at
Solid Wire .023 –.052” (0.6 –1.4 mm)
60% duty cycle
50–780 IPM (1.3 –19.8 Flux-Cored .030 – 5/64” (0.8 – 2.0 mm)
425 A at
m/min.) Actual range in Solid Wire .023 –.052” (0.6 –1.4 mm)
60% duty cycle
CC mode is dependent Flux-Cored .030 – 5/64” (0.8 – 2.0 mm)
330 A at
on arc voltage applied Solid Wire .023 – .062” (0.6 – 1.6 mm)
60% duty cycle
Flux-Cored .030 – .062” (0.8 – 1.6 mm)
425 A at
Solid Wire .023 – 5/64” (0.6 – 2.0 mm)
60% duty cycle
Flux-Cored .030 – 5/64”(0.8 – 2.0 mm)
425 A at
50–700 IPM
Solid Wire .023 –.052” (0.6 –1.4 mm)
60% duty cycle (1.3 –17.8 m/min.) Flux-Cored .030 – 5/64” (0.8 – 2.0 mm)
SP04-10 GREGG DISTRIBUTORS LTD.
Maximum
Spool
Size Capacity
8” (203 mm),
14 lb. (6.4 kg)
12” (305 mm),
45 lb. (20 kg)
8” (203 mm),
14 lb. (6.4 kg)
12” (305 mm),
45 lb. (20 kg)
12” (305 mm),
45 lb. (20 kg)
Dimensions
Net Weight
12.75”H x 7.25”W x 18”D
28 lb. (13 kg)
(324 mm x 184 mm x 457 mm)
15.5”H x 9”W x 21”D
35 lb. (15.9 kg)
(394 mm x 229 mm x 533 mm)
12.75”H x 7.25”W x 18”D
28 lb. (13 kg)
(324 mm x 184 mm x 457 mm)
15.5”H x 9”W x 21”D
35 lb. (15.9 kg)
(394 mm x 229 mm x 533 mm)
15.5”H x 9”W x 21”D
31 lb. (14.1 kg)
(394 mm x 229 mm x 533 mm)
MILLER®
MLR/2777/2784
Wire Feeders
20 Series
70 Series
•Designed for manufacturing, our popular bench feeders are available in two series with multiple models to fit your needs •Trigger hold allows the operator to make long welds without having to
hold the trigger continuously. Reduces operator fatigue. •Miller® standard, quick-change drive rolls save time •Quick-release drive-roll pressure arm allows drive roll change without losing spring
preload setting •Easy loading and threading of welding wire without having to release the drive-roll pressure arm •Each feeder includes a 15-foot Bernard Q300 (20 Series) or Q400 (70 Series)
MIG gun (two with dual-wire models), plus a 10-foot 14-pin interconnecting cord
Additional Features for 70 Series Feeders: •Available in dual-wire models which allows two different wire types to be available on one feeder, avoiding downtime from changing spools and drive
rolls •Toolless rotatable drive assembly allows operator to rotate the drive housing, allowing a straight path for wire flow •High-torque permanent-magnet motor, sealed ball bearing gear drive and
solid-state speed and brake control are maintenance free for long life •Trigger dual schedule for easily changing weld parameters while welding. Achieves the best weld settings for different joint
configurations. (DX and MPa models only.)
20 SERIES INDUSTRIAL & 70 SERIES HEAVY-INDUSTRIAL BENCH FEEDERS
22A & 24A
•Simple and cost-effective feeders for industrial manufacturing and fabricating •Ideal for most high-duty-cycle applications
requiring day-in/day-out trouble-free operation •On-board burnback and motor ramp control for excellent starting and stopping
performance •Two gear-driven drive rolls on 22A and four gear-driven drive rolls on 24A provide smooth, positive wire feed
Additional features for 24A feeder: •Remote voltage control at feeder for easier adjustments in the weld cell •Adjustable run-in
control for better arc-starting performance on a variety of wires •Four gear-driven drive rolls provide more consistent feeding on
larger wire diameters
74S & 74D
•Standard, simple feeders for most heavy-industrial applications, with the 74D providing increased accuracy and control of the
most common weld parameters •Digital meters (74D models only) ensure accuracy when presetting and reading actual voltage,
amperage and wire feed speed •Remote voltage control (74D models only) allows you to set both voltage and wire feed speed at
the feeder, saving time and increasing weld quality because optimal weld parameters are easy to set
74DX
•Adds features for weld control and programs •Adjustable run-in control for improved arc starts •Dual schedule control allows the
operator to switch between two preconfigured welding parameters without readjusting the machine, saving time and enhancing
quality •Trigger program select provides the ability to access any of the four active programs •Sequence control gives the operator the ability to adjust all of the welding parameters: preflow, run-in, weld time, crater, burnback and postflow •Locks and limits
for restricting or limiting operator adjustments, such as voltage and wire feed speed parameters •Four weld program memories
allow operators to recall up to four previously used processes and their weld settings
74 MPa Plus
•Adds push-pull aluminum capabilities. Optimized with Invision™ MPa or XMT® MPa power sources. •Recommended aluminum
solution. Dedicated XR Plus guns (gooseneck and pistol grip) work with MPa Plus feeders to coordinate wire feed speed of the
gun and the feeder. This provides optimized aluminum feeding and welding performance. •Trigger schedule select saves time
when switching between two weld settings by simply tapping gun trigger •Accu-Mate™ properly seats the MIG gun power pin for
best feeding performance •Alumination™ gives you the ability to use the extended reach of a push-pull system for consistent,
versatile and dependable aluminum wire feeding
Additional features when used with Invision MPa or XMT MPa power sources: •Synergic Pulsed MIG. As wire speed
increases/decreases, pulse parameters also increase/decrease to match the right amount of power needed, eliminating the need
to make additional adjustments •Profile Pulse™ provides TIG appearance with MIG simplicity and productivity. Achieve “stacked
dimes” without gun manipulation. Profile Pulse frequency can be changed to increase or decrease the spacing between the ripple
pattern to achieve the desired weld appearance.
Processes:
• MIG (GMAW) • Flux-Cored (FCAW) • Pulsed MIG (GMAW-P) with MPa Plus feeder and optional MPa power source
Models include Bernard™Q300 (20 Series) or Q400 (70 Series) MIG gun (two with D-74 models), .035/.045” drive rolls and
Centerfire™contact tips.
Model No.
22A
22A 22A 24A 24A S-74S S-74D S-74DX S-74DX S-74 MPa Plus
D-74S D-74D D-74DX Input
Power
951190-
24 VAC, 7 A,
951191 Run-in control
50/60 Hz
951192 Digital display and voltage control
951193-
951194 Digital display
24 VAC,10 A,
951196Single-wire
50/60 Hz
951198Single-wire
951200 Single-wire with standard motor
951202 Single-wire with low-speed motor
951291Single-wire
951203Dual-wire
951204Dual-wire
951206Dual-wire
Part No.
Features
•CP-302 (22A only) •Deltaweld® Series •Invision™ MPa
Series •Dimension™ Series •XMT® Series (except VS model)
SUGGESTED GUNS
•Bernard™ •XR-Aluma-Pro™ Plus and XR™-Pistol Plus
Dimensions
Net
Weight
75– 750 IPM 22A: .023 – 5/64” (0.6 – 2.0
60-lb. (27 kg) coil
mm)
(1.9 –19 m/
with optional wire reel
24A:.023 – 3/32” (0.6 – 2.4
min.)
assembly #108008
mm)
11”H x 10.75”W x 23.5”D
(279 mm x 273 mm x 597 mm)
22A: 36 lb.
(15.4 kg)
24A: 40 lb.
(18 kg)
50–780 IPM .023 –1/8” (0.6 – 3.2 mm) Low
speed motor required for 1/8” (3.2
(1.3 –19.8 m/ mm)
diameter wire (factory option)
min.)
MPa Plus model
14”H x 12.5”W x 28”D
(356 mm x 318 mm x 711 mm)
58 lb.
(26 kg)
Wire Feed
Speed
Wire Type and
Diameter Capacity
Maximum Spool
Size Capacity
Hard Wire: .035 –5/64” (0.9 – 2.0
mm)
Aluminum**: .035 –.052” (0.9 –
1.3 mm)
14”H x 21”W x 35”D
(356 mm x 533 mm x 889 mm)
87 lb.
(39.5 kg)
20 SERIES INDUSTRIAL & 70 SERIES HEAVY-INDUSTRIAL BENCH FEEDERS ACCESSORIES
Part No. 142382, Feeder Cart.
Part No. 047141, Spool Adapter.
Part No. 146236, Turntable Assembly.
Part No. 058435, Hanging Bail.
Part No. 108008, Wire Reel Assembly.
Part No. 057607, Spool Covers For 20 and 70 Series single-wire models and left side of dual-wire models.
Part No. 090389, Spool Covers For right side of dual-wire models.
20 & 70 SERIES PUSH-PULL GUNS
Model No.
XR-Aluma-Pro Plus (Air-cooled)
XR-Aluma-Pro Plus (Water-cooled)
XR-Pistol Plus (Air-cooled)
XR-Pistol Plus (Water-cooled)
15 ft. (4.6 m)
Part No.
300000001
300003001
Cable Length
25 ft. (7.6 m)
Part No.
300001001 300004001
35 ft. (10.6 m)
Part No.
-
-
300753
-
300754
300757 300755
-
Welding Current Rating
Wire Feed
Speed
300 A at 100% duty cycle
70–900 IPM
400 A at 100% duty cycle (1.8–23 m/min.)
Wire Type and
Diameter
Capacity
Aluminum
.030 –.052”
(0.8–1.3 mm)
Dimensions
Net Weight
5”H x 2.5”W x 17”L 2.5 lb. (1.1 kg)
(127 mm x 64 mm x 2.9 lb. (1.3 kg)
432 mm)
7.375”H x 1.875”W x 2.2 lb. (1 kg)
10.625”L (187 mm x 2.4 lb. (1.1 kg)
48 mm x 270 mm)
www.greggdistributors.ca SP04-11
MILLER®
MLR/2777/2784
Wire Feeders
70 SERIES Swingarc™
•Swingarc boom-mounted wire feeders bring an extra dimension of flexibility and efficiency to weld stations
dealing with large weldments, or wherever operator mobility is required •Single- and dual-wire models with
8, 12 or 16 ft. booms are sized to accommodate a variety of weld cell layouts (16, 24 or 32 ft. diameter
work area) •Counterbalance design makes it easy to position boom and 360° rotation and 60° lift angle
maximizes work area •In-boom cable routing organizes hoses and cables for a cleaner work environment
•Each feeder includes a 15 ft. Bernard Q400 MIG gun (two with dual-wire models), plus a 10 ft. 14-pin
interconnecting cord to connect power source to boom control •MPa Plus Swingarcs. Optimized for the
Invision™ MPa and XMT® MPa power sources and available with single or dual-wire feeders and three
boom lengths.
Processes:
•CP-302 (22A only) •Deltaweld® Series •Invision™ MPa
•MIG (GMAW) •Flux-Cored (FCAW)
Series •Dimension™ Series •XMT® Series (except VS model)
Models include Bernard™Q400 MIG gun, .035/.045” drive rolls and Centerfire™contact tips.
Single-Wire Feeders
Stock No.
Part No.
8-ft. (2.4 m) Boom
SS-74S8 951522 SS-74D8 951525
SS-74DX8 951528
SS-74MPa Plus-8 951437
12-ft. (3.7 m) Boom
SS-74S12 951523
SS-74D12 951526
SS-74DX12 951529
SS-74MPa Plus-12 951438
16-ft. (4.9 m) Boom
SS-74S16 951524
SS-74D16 951527
SS-74DX16 951530
SS-74MPa Plus-16 951439
Model No.
Part No. 183997, Swingpak™ Base.
Part No. 149838, 4 ft. Pipe Post with 18” Base.
Part No. 149839, 6 ft. Pipe Post with 18” Base.
Use with CV, DC power sources.
Input
Dual-Wire Feeders
Wire Feed Speed
Power
Stock No.
Part No.
DS-74S8
951531 24 VAC, 10 A,
50–780 IPM
DS-74D8 951534
50/60 Hz
(1.3 –19.8 m/min.)
Consult factory for lowDS-74DX8 951537
and high-speed motor
DS-74MPa Plus-8 951440
options on non-MPa
DS-74S12 951532
feeders
DS-74D12 951535
DS-74DX12 951538
DS-74MPa Plus-12 951441
DS-74S16 951533
DS-74D16 951536
DS-74DX16 951539
DS-74MPa Plus-16 951442
Wire Diameter Maximum Spool
Net Weight with Feeder
Capacity
Size Capacity
.023 –5/64 in. 60-lb. (27 kg) coil
Single-Wire Feeder:
(0.6 – 2.0 mm) with optional wire
110 lb. (50 kg)
reel assembly
Dual-Wire Feeder:
#108008
134 lb. (61 kg)
Single-Wire Feeder:
160 lb. (73 kg)
Dual-Wire Feeder:
207 lb. (94 kg)
Single-Wire Feeder:
210 lb. (95 kg)
Dual-Wire Feeder:
280 lb. (127 kg)
Single/Dual Spool Carrier (Pipe Post not included). Designed to put spool
hub assembly at 36” from base for easier wire spool installation.
Part No. 300353, For 4-ft. post.
Part No. 300352, For 6-ft. post.
70 SERIES REMOTE CONFIGURATIONS
•Remote wire feeder control box and wire drive assembly for non-Miller boom applications.
Processes:
•MIG (GMAW) •Flux-Cored (FCAW)
Single-wire Control Box
Part No. 300881, S-74S.
Part No. 300882, S-74D.
Part No. 300883, S-74DX.
Part No. 300738, S-74 MPa Plus.
Use with CV, DC power sources.
Gun NOT included.
Must be ordered separately.
Motor Control Cable
Standard: 11 conductor
MPa Plus: 14 conductor
Motor Control Cable
11 conductor
Wire Drive Motor Assembly
•MPa Plus drive can be used with push-only guns, or XRAlumaPro™ Plus and Pistol Plus push-pull guns.
Part No. 300904, Standard left-hand drive.
Part No. 300740, MPa Plus left-hand drive.
Motor Control Cable
Standard: 11 conductor
MPa Plus: 14 conductor
Gun NOT included.
Push-only wire drive motor assembly
Part No. 300741001, Standard right-hand drive.
Part No. 300741, MPa Plus right-hand drive.
Motor Control Cable (11 conductor)*
•For push-only gun configurations.
Part No. 254935010, 10 ft. (3 m)
Part No. 254935025, 25 ft. (7.6 m)
MPa Plus Motor Control Cable (14 conductor)*
•For MPa Plus configurations only — single-wire or left side of
dual-wire.
Part No. 254864010, 10 ft. (3 m)
Part No. 254864025, 25 ft. (7.6 m)
Part No. 195369, Feeder Base - For use with spooled wire.
Dual-wire control box
Part No. 300886, D-74S.
Part No. 300887, D-74D.
Part No. 300888, D-74DX.
Part No. 300739, D-74 MPa Plus.
Gun NOT included.
Wire drive motor assembly
•MPa Plus drive can be used with push-only guns, or XRAlumaPro™ Plus and Pistol Plus push-pull guns.
Part No. 300904, Standard left-hand drive.
Part No. 300740, MPa Plus left-hand drive.
MILLER®
MLR/2777/2784
SMAW/Stick Welders
Thunderbolt XL 225 AC & 225 AC/150 DC
®
•Economical Stick machines with precise, dependable control •Accu-Set™ amperage indicator provides precise heat control
•Unit allows higher duty cycle when amperage decreases •Infinite current control allows the operator to adjust output by as little
as one-amp increments •Output selector switch on AC/DC units allows you to quickly select AC, DCEP or DCEN without adjusting the output leads •Certified by Canadian Standards Association to both the Canadian and U.S. Standards
Processes:
•Stick (SMAW)
15 ft. (4.5 m) No. 4 electrode cable with heavy-duty electrode holder, 10 ft. (3 m) work cable with clamp, and Power cord with plug
Part No. 903641, Thunderbolt XL 225 AC (CSA). 230 V, 50/60 Hz.
Part No. 903642, Thunderbolt XL 225 AC/150 DC (CSA). 230 V, 50/60 Hz.
Part No. 043927, Thunderbolt XL Running Gear.
Welding
Mode
AC
AC
DC
Part No.
903641
903642
Welding
Amp Range
30–235
30–235
30–160
225 AC model is AC only.
Rated Output at 20% Duty Cycle, 60 Hz Rated Output at Amps Input at Max. OpenDimensions
(15% Duty Cycle, 50 Hz)
100% Duty Cycle Rated Output Circuit Voltage
225 A at 25 VAC
100 A
47.5
80
18.75”H x 12.75”W x
225 A at 25 V
100 A
47.5
80
17.5”D (476 mm x 323
150 A at 25 V
65 A
mm x 445 mm)
Net Weight
85 lb. (39 kg)
104 lb. (47 kg)
Dialarc® 250 AC/DC
•Superb performance and versatility in a flexible Stick machine •Single-dial infinite current control simplifies and allows precise
weld output adjustment •High and low ranges for both AC and DC allow greater control of weld performance •Forced-draft
cooling fan ensures cooler running product, extending life of power source •Superior 6010 and 7018 Stick welding performance
offers wide range of electrode versatility •High output and duty cycle allow unit to handle nearly all Stick welding needs •Optional
remote weld output control provides current control without going back to power source saving time and effort
Processes:
•Stick (SMAW) • Air Carbon Arc Cutting and Gouging (CAC-A) (3/16” carbons)
Part No. 907017, Dialarc without Power Factor Correction. 200(208)/230/460 V. Part No. 242199020, RFC-23A Remote Foot Control.
Part No. 242210020, RHC-3 Remote Hand Control.
Part No. 907015, Dialarc with Power Factor Correction. 208/230/460/575 V.
Part No. 041580, No. 19 Running Gear.
Model No.
Dialarc w/o Power
Factor Correction
Dialarc w Power
Factor Correction
Welding
Mode
AC
DC
AC
DC
Welding
Amp Range
35–300
35–265
35–300
35–265
Rated Output at
30% Duty Cycle
225 A at 29 VAC
225 A at 29 VAC
225 A at 29 VAC
225 A at 29 VAC
Max. OpenDimensions
200 V 208 V 230 V 460 V 575 V KVA KW Circuit Voltage
84 — 73
36 29 16.8 9.8
70
24.25”H x 19”W x 28”D
(616 mm x 483 mm x
92 — 80 40 32 18.6 11.8
79
— 60 55 27 22 12.5 9.9
70
711 mm)
— 66 60 30 24 13.7 10.8
79
Net Weight
360 lb. (163 kg)
365 lb. (166 kg)
Maxstar® 150 S
•Provides maximum portability and performance in a compact Stick package. Packs dependability and performance all in one
machine. •Multi-voltage plug (MVP™) allows connection to 120 or 240-volt receptacles without tools. Choose the plug that fits
the receptacle and connect it to the power cord. •Portable with adjustable shoulder strap. Easy to transport at only 13.2 pounds.
•Allows for any input voltage hook-up (120–240 V) with no manual linking, providing convenience in any job setting •Adaptive
Hot Start™ for Stick arc starts reduces electrode sticking •Single amperage range allows operator to accurately set amperage on
both 120 or 240-volt primary power
Processes:
•Stick (SMAW)
10 ft. power cord with MVP plugs for 120 V and 240 V, 13 ft. (4 m) electrode cable with holder and 25 mm Dinse connector, and
10 ft. (3 m) work cable with clamp and 25 mm Dinse connector
Part No. 300184, Protective X-CASE™.
Part No. 907134, 115-230 VAC, 50/60 Hz.
Part No. 907134012, 115-230, 50/60 Hz with X-CASE.
Input
Power
115 VAC
230 VAC
Welding
Amp Range
20–100
20–150
Rated Output
Amps Input at Rated KVA at
Output, 50/60 Hz Duty Cycle
26.4
3.0
21.6
4.9
KW
3.0
4.7
Max. OpenDimensions
Circuit Voltage
9”H x 5.5”W x 13.25”D
90 (12 –16 VDC*)
(229 mm x 140 mm x
337 mm)
Net Weight
13.2 lb. (6.0 kg)
*Sense voltage for Stick.
Maxstar® 200 STR
•Maximum flexibility with automatic connection to any input power while maintaining the best DC Stick/TIG welding performance
in its product class •Allows for any input voltage hook-up (120–480 V) with no manual linking, providing convenience in any
job setting •Lift-Arc™ provides TIG arc starting without the use of high frequency •Low OCV Stick model reduces open-circuit
voltage to 9–14 VDC. This eliminates the need for add-on voltage reducers. •Excellent for thin/medium wall pipe welds •Remote
amperage control •Adaptive Hot Start™ for Stick arc starts •Portable with adjustable shoulder strap
Processes:
•Stick (SMAW) • TIG (GTAW)
8 ft. (2.4 m) power cord (no plug) and Two 50-mm Dinse connectors
Part No. 907036, Low OCV.
Part No. WP-17V-12-R, 12.5-ft. (3.8 m) Weldcraft™ A-150V TIG torch.
Part No. 907036001, Normal OCV. Part No. 195321, Protective Cover.
Amps Input at Rated Load Output, 50/60 Hz Max. OpenWelding
Input
Welding
Rated Output
Dimensions
Process
Power
Amp Range
115 V 230 V 400 V 460 V KVA KW Circuit Voltage
Stick
3-phase
1–200
— 13.1 7.4 6.4 5.2 5.0
80 VDC
13.5"H x 7.5"W x 17.5"D
1-phase
1–200
— 21.7 — — 5.0 5.0 (9 –14 VDC*)
(343 mm x 191 mm x
1–90
125 A at 25 V, 50% duty cycle 34.1 — —
— 4.0 3.8
445 mm)
TIG
3-phase
1–200
— 10.5 6.0 5.2 4.2 4.0
80 VDC
1-phase
1–200
— 17.4 — — 4.0 4.0 (9 –14 VDC*)
1– 150 (120 V) 150 A at 16 V, 70% duty cycle 29.7 14.1 — — 3.4 3.4
Net Weight
32 lb. (14.5 kg)
*Sense voltage for Stick and Lift-Arc TIG.
MILLER®
MLR/2777/2784
SMAW/Stick Welders
Gold Star® SERIES
•Rugged, reliable performance and superior arc characteristics. •Hot Start™ and built-in arc control •Enclosed circuit board
•Thermal overload protection with light •Fan-On-Demand™ •15 A, 115 VAC duplex receptacle •Power efficient •Remote control
capability •Optional digital volt and amp meters
Processes:
• Stick (SMAW) •TIG (GTAW) •Air Carbon Arc Cutting and Gouging (CAC-A) (carbons —
452: 5/16”, 652: 3/8”) •Flux-Cored (FCAW) •MIG Spray Transfer (GMAW) with voltage-sensing feeder
Part No. 903374, Gold Star 452. 200(208)/230/460 V.
Part No. 903400, Gold Star 452. 230/460/575 V.
Part No. 903402, Gold Star 652. 230/460/575 V.
Dimensions
Amperage Range
Max. OpenRated Output
in CC Mode
200 V 230 V 460 V 575 V KVA KW Circuit Voltage (Includes lift eye and strain relief)
Gold Star 452
20–590
450 A at 38 VDC, 60% duty cycle 102 89 45 36 35.5 23.3
72 VDC
30”H x 23”W x 38”D
Gold Star 652
50–850
650 A at 44 VDC, 60% duty cycle — 124 62 50 49.4 36
72 VDC
(762 mm x 585 mm x 966 mm)
Net Weight
Model No.
404 lb. (183 kg)
505 lb. (229 kg)
CST™ 280
•Durable power source designed for the construction industry. Ideal for Stick electrodes up to 3/16” and TIG welding of pipe and
plate. •Easy voltage changeover between voltage ranges through a two-position manual switch located on the rear panel. Simplifies voltage change in racks. •Process selector knob automatically sets proper DIG setting on E6010 and E7018 stick electrodes
for better performance •Lift-Arc™ for TIG arc starts without the use of high frequency •Fan-On-Demand™ power source cooling
system operates only when needed, reducing noise, energy use and the amount of contaminants pulled though the machine
•Remote amperage control through the 14-pin connector
Processes:
•Stick (SMAW) •TIG (GTAW)
One set of male connectors (Dinse-style model only)
Part No. 907244, Dinse. 220-230/460-575 V.
Part No. 907244011, Tweco®. 220-230/460-575 V.
Part No. 907251, Dinse. 208-230/400-460 V.
Part No. 907251011, Tweco®. 208-230/400-460 V.
Input
Welding
Power
Amp Range
220-230/460-575V 3-phase
5–280
1-phase
5–200
208-230/400-460V 3-phase
5–280
1-phase
5–200
Voltage Range
Rated Output
208 V
—
—
—
—
36.0 23.5 43.9 35.0 Amps Input at Rated Load Output, 50/60 Hz
Max. Open220 V 230 V 400 V 440 V 460 V 575 V KVA KW Circuit Voltage
35.0 34.2 — — 17.8 14.7 14.6 10.2
77 VDC
23.3 22.5 — — 11.7 9.7 9.6 6.4
43.9 43.0 — —
—
— 10.1 6.6
32.7 32.0 — —
—
— 7.3 4.6
— 34.0 19.8 18.0 17.5 — 14.0 10.2
67 VDC
— 22.8 13.5 12.0 12.7 — 10.2 6.9
— 43.0 — —
—
— 9.9 6.5
— 32.9 — —
—
— 7.6 4.8
Dimensions Net Weight
13.5”H x
41 lb.
7.5”W x 18”D (18.6 kg)
(343 mmx
191 mm x
457 mm)
CST™ 280 Racks
•Rugged enclosure provides simple means for protecting and transporting multiple welding power sources for construction, maintenance/repair and shipbuilding applications •Light weight and small footprint for easy transportation •The low weight enables the
use of elevators to move the rack •All controls including power switch are located on front of machine for easy access •Top cover
protects machines from falling debris •Lift eye simplifies crane or overhead lifting device transport •Lift truck fork pockets •One
main disconnect box with branched fusing for each machine •Common output ground connection (for same polarity use only)
•Optional rack running gear available for moving the rack
Processes:
• Stick (SMAW) • TIG (GTAW) • Air Carbon Arc Cutting and Gouging (CAC-A) (5/16”. carbons with paralleled CST 280s)
Part No. 907247, Tweco® 4-Pack Rack.
Part No. 907245, Dinse 4-Pack Rack.
Part No. 907365, Tweco® 8-Pack Rack.
Part No. 195051, Empty Rack.
Part No. 195114, 4-Pack Rack Running Gear.
Part No. 195436, 8-Pack Rack Running Gear.
Model No.
4-Pack Rack
Rack
Input Power to Rack*
Capacity
220 V 230 V 400 V 440 V 460 V 575 V
4 units 3 -phase, 220-230/460-575 V, 50/60 Hz. 137 134 79
72 70 57
KVA
KW
58.4
50.75”H (1289 mm)
40.8
355 lb. (161 kg)
4-pack: 25.5”W (648 mm)
8-pack: 46”W (1168 mm) 640 lb. (290 kg)
81.6
26.5”D (673 mm)
—
Same as 4-pack rack
166 lb. (75 kg)
8-Pack Rack
8 units
274 268
158 145 140 114
116.8
Empty Rack
4 units
—
—
—
—
—
—
—
Note: CST 280s are factory-linked for 460-575 V. Dinse units include one set of male connectors; Tweco units do not. See above for information on CST 280.
Dimensions
Net Weight
MILLER®
MLR/2777/2784
GTAW/TIG Welders
Diversion™ 165 & 180 AC/DC TIG
•Professional-grade arc in a package designed specifically for personal users. Contains all of the features you need—simplicity combined with superior performance and value. •Easy-to-understand operator interface. Power up, select material type,
set material thickness range and start welding! •Inverter-based, AC/DC power source provides a more consistent welding arc
while using less power •HF arc starting provides non-contact arc starting that eliminates tungsten or material contamination
•Fan-On-Demand™ cooling system only operates when needed to reduce noise and maintenance •Portable. Easy to transport
at 50 pounds. •Auto-postflow protects the weld end zone and electrode by optimizing post flow time based on welding amperage
•Advanced squarewave AC provides a fast freezing weld puddle and deeper penetration •Weldcraft™ A-150 torch with Diamond
Grip™ provides more comfortable grip and reduces operator fatigue •Diversion 180 includes multi-voltage plug (MVP™) which
allows connection to 120 or 240-volt receptacles without tools. Choose the plug that fits the receptacle and connect it to the cord.
Processes:
•TIG (GTAW)
Power cord with 50 A, 240 V plug (165 model) or MVP plugs for 120 V and 240 V (180 model), 12.5 ft. (3.8 m) Weldcraft™ A-150
TIG torch, 12 ft. (3.7 m) work cable with clamp, RFCS-RJ45 remote foot control, and Flow gauge regulator with hose
Part No. 907626, Diversion 165.
Steel Welding Capability Aluminum Welding Capability
Part No. 907627, Diversion 180.
Min - 0.030” (0.75 mm)
Part No. 301239, Running Gear/Cylinder Rack. Min - 0.025” (0.6 mm)
Max - 3/16” (4.8 mm)
Max - 3/16” (4.8 mm)
Part No. 300688, RJ45 to 14-Pin Adapter Cord.
Input Welding Amp.
Power
Range
Diversion 165 230 VAC
10 –165
Diversion 180 115 VAC
10 –125
230 VAC
10 –180
Model
Rated Output
Amps Input at
Rated Output
23 (.20*)
25.5 (.20*)
26.5 (.88*)
16 (.44*)
20.5 (.44*)
Max. OpenDimensions
Circuit Voltage
5.3 (.04*) 3.7 (.02*)
80 VDC
17”H x 9.875”W x
23.875”D (433 mm x
5.9 (.04*) 4.2 (.02*)
3.1 (.1*) 3.0 (.03*)
251 mm x 608 mm)
3.7 (.1*) 3.6 (.03*)
4.7 (.1*) 4.6 (.03*)
KVA
KW
Net Weight
50 lb. (23 kg)
*While idling.
Syncrowave® 210 SERIES AC/DC TIG & STICK
•Continuing the tradition of innovation through advanced inverter technology for light-industrial and personal users •Allows for any input voltage
hook-up (120–240 V) with no manual linking, providing convenience in any job setting •Multi-voltage plug (MVP™) allows connection to 120- or
240-volt receptacles without tools. Choose the plug that fits the receptacle and connect it to the cord. •Update and expand. Front panel memory
card data port provides the ability to easily update software and expand product features. •Low power draw. Inverter-based power source provides
full welding output from 240 volts while drawing less than 30 amps •Pro-Set™ (TIG/Stick) eliminates the guesswork when setting weld parameters.
Use Pro-Set when you want the speed, convenience and confidence of preset controls. •AC balance (TIG) control provides adjustable oxide
removal which is essential for creating the highest quality aluminum welds •Pulse (TIG). Pulsing can increase puddle agitation, arc stability and
travel speeds while reducing heat input and distortion. Expandable feature. •DIG (Stick) control allows the arc characteristics to be changed for
specific applications and electrodes. Lower the DIG setting for smooth running electrodes like E7018 and increase the DIG setting for stiffer, more
penetrating electrodes like E6010. •Auto-Set™ (MIG) automatically sets your welder to the proper parameters. Simply set the wire size, material
thickness, and shielding gas, and you’re ready to weld. (TIG/MIG complete package only.)
Processes:
• AC/DC TIG (GTAW) • DC Stick (SMAW) • Pulsed TIG (GTAW-P) • MIG (GMAW)* • Flux-Cored (FCAW)*
*TIG/MIG Complete package only.
10 ft. power cord with MVP plugs for 120 V and 240 V, 12.5 ft. (3.8 m) Weldcraft™ A-150 TIG torch, 12-ft. (3.7 m) work cable with clamp and Dinse
connector, Electrode holder with Dinse connector, RFCS-14 remote foot control, Flow gauge regulator with hose, and Factory-installed running gear
with EZ-Change™ low cylinder rack
TIG/MIG Complete Package Comes with Above Plus:
•Spoolmate™ 100 spool gun, 4-14 pin connector, Flow-thru Dinse connector, and Memory card
Part No. 907596, Runner.
Part No. 300429, Wireless Remote Foot Control.
Steel Welding Capability
Part No. 951616, Runner TIG/MIG Complete.
Part No. 301128, DC pulse Memory Card Expansion.
Min - 0.020” (0.5 mm)
Part No. WP-17-25-R, 25-ft. (7.6 m) Weldcraft™ A-150 TIG Torch. Part No. 301127, AC frequency Memory Card Expansion.
Max - 1/4” (6.4 mm)
Part No. AK-150MFC, TIG Torch Accessory Kit. Allows A-150
Part No. 151086, RCC-14 Remote Control.
torch customization. Converts into 28 different torch styles while
using existing cable. Includes collets, collet bodies, nozzles, torch
Min - 0.020” (0.5 mm)
heads, handle and more.
Max - 1/4” (6.4 mm)
Input
Power
115 V
230 V Welding
Process
DC TIG
AC TIG
DC Stick
DC TIG
AC TIG
DC Stick
Welding
Amp Range
5–125 A
5–125 A
20– 90 A
5– 210 A
5– 210 A
20–150 A
Rated Output (R.M.S.)
Amps Input at
Rated Output
17.4 (.58*)
12.4 (.58*)
20.5 (.58*)
11.9 (.35*)
8.62 (.35*)
11.9 (.35*)
Max. OpenDimensions
Circuit Voltage
47 VDC
31.5”H x 18.5”W x 43”D
(800 mm x 470 mm x
1,092 mm)
Net Weight
Runner package:
133.5 lb. (61 kg)
Runner TIG/MIG
Complete package:
139.5 lb. (63 kg)
*While idling.
MILLER®
MLR/2777/2784
GTAW/TIG Welders
Maxstar® 150 STL & STH DC TIG & STICK
• Maximum portability and performance provided in one compact TIG/Stick package •Two models available: STL: DC TIG/Stick
with Lift-Arc™ starting without the use of high frequency; STH: DC TIG/Stick with high frequency and Lift-Arc™ starting, plus
built-in pulsing with a selection of four fixed-pulse frequencies •Allows for any input voltage hook-up (120–240 V) with no manual
linking, providing convenience in any job setting •Multi-voltage plug (MVP™) allows connection to 120 or 240-volt receptacles
without tools. Choose the plug that fits the receptacle and connect it to the power cord. •Portable with adjustable shoulder strap
•Easy to transport at 13.7 pounds •Built-in gas solenoid eliminates the need for bulky torch with a gas valve
Processes:
•TIG (GTAW) • Stick (SMAW) • Pulsed TIG (GTAW-P) w/STH model
10-ft. power cord with MVP plugs for 120 V and 240 V, 13 ft. (4 m) electrode cable with holder and 25-mm Dinse connector, and
10 ft. (3 m) work cable with clamp and 25-mm Dinse connector
TIG/Stick Package Includes Above Plus:
12.5-ft. (3.8 m) Weldcraft™ A-150 TIG torch, Protective X-CASE™, Flow gauge regulator with hose, Remote fingertip control
(only in packages #907135017 and #907136017), and AK2C accessory kit
Part No. 300184, Protective X-CASE™.
Part No. 907135, Maxstar 150 STL Machine only.
Part No. 195184, RCCS-6M Remote Fingertip Control.
Part No. 907135016, Maxstar 150 STL TIG/Stick package.
Part No. 195183, RFCS-6M Remote Foot Control.
Part No. 907135017, Maxstar 150 STL TIG/Stick package with remote fingertip control.
Part No. 907136, Maxstar 150 STH Machine only.
Part No. 907136017, Maxstar 150 STH TIG/Stick package with remote fingertip control.
Welding
Process
TIG
Stick
Input
Welding
Power Amp Range
115 VAC
5–150
230 VAC
5–150
115 VAC
20–100
230 VAC
20–150
Rated Output
Amps Input at Rated
Output, 50/60 Hz
28.0
14.2
26.4
21.6
KVA at
Duty Cycle
3.4
3.2
3.0
4.9
Max. OpenDimensions
Circuit Voltage
3.1
90 VDC
9”H x 5.5”W x 13.25”D
3.1 (12 –16 VDC*) (229 mm x 140 mm x
3.0
337mm)
4.7
KW
Net Weight
13.7 lb. (6.2 kg)
*Sense voltage for Stick and Lift-Arc TIG.
Syncrowave 250 DX & 350 LX AC/DC TIG & STICK
®
•The world’s first conventional squarewave TIG power source with decades of proven performance •Squarewave output with AC
balance control features adjustable cleaning action while increasing arc stability on various aluminum alloys, and helps eliminate
tungsten spitting and arc rectification •120-volt auxiliary power receptacle for cooling system or small tools •Syncro Start™
technology for customized arc starts. Allows more precise arc starts and fine-tuning based on tungsten diameter and material
thickness. •HF arc starting provides non-contact arc starting that eliminates tungsten or material contamination •Dual digital
meters allow for quick and easy viewing of actual and preset values of amperage and voltage •Adjustable postflow of 0 – 50
seconds protects the electrode and area near the termination of the weld •Coolmate™ 3X cooler (shown in Complete package).
Three-gallon cooling system features a flow indicator to visually indicate system is working and an external filter to stop objects
from entering the water-cooled torch cable. •Last procedure recall automatically recalls the last procedure setup when switching
polarity •Line voltage compensation keeps power source constant regardless of fluctuations in input power (±10%) •Lift-Arc™
provides DC arc starting without the use of high frequency
Processes:
TIG (GTAW) • Stick (SMAW) • Pulsed TIG (GTAW-P) (optional on 250 DX) • Air Carbon Arc (CAC-A)
Comes Complete with*:
•Two 50-mm Dinse connectors
*Power cord NOT included.
Complete Packages Come with*:
No. 37 running gear, Coolmate™ 3X cooler, Coolant (four gallons), 25 ft. (7.6 m) water-cooled torch with Dinse connector
(Syncrowave 250: Weldcraft™ W-250) (Syncrowave 350: Weldcraft™ W-375), 15 ft. (4.6 m) work cable with clamp and Dinse
connector, RFCS-14 remote foot control, Flowmeter regulator with hose, Torch accessory kit with tungsten, and Cable cover
*Power cord NOT included.
Part No. 907195, Syncrowave 250 DX Machine only. Part No. 300429, Wireless Remote Foot Control.
Part No. 300548, Pulser Module (250 DX ONLY, standard on 350 LX). For welding thin
Part No. 951118, Syncrowave 250 DX Complete.
Part No. 907199, Syncrowave 350 LX Machine only. materials. Provides a heating and cooling effect of the weld puddle to reduce heat input
and control distortion of the material. Provides 0.25 to 10 pulses per second.
Part No. 951623, Syncrowave 350 LX Complete.
Part No. 300547, Sequencer Module (250 DX/350 LX). Provides a starting current
higher or lower than the welding current. Provides final slope and final current for trailing
the weld. Provides a spot timer for TIG spot application
Welding
Amp Range
Syncrowave
230/460/575 V,
3–310
250 DX
50/60 Hz
Syncrowave
3–400 350 LX
Model No. Input Power
Rated Output
200 A at 28 VAC, 60% duty cycle
Model 250: Min - 0.012” (0.3 mm)
Max - 1/2” (12.7 mm)
Model 350: Min - 0.012” (0.3 mm)
Max - 5/8” (15.9 mm)
Model 250: Min - 0.015” (0.4 mm)
Max - 3/8” (9.5 mm)
Model 350: Min - 0.015” (0.4 mm)
Max - 1/2” (12.7 mm)
Max. OpenDimensions*
Net Weight**
230 V 460 V 575 V
KVA
KW Circuit Voltage
77 38 31 17.6 8.6
80 VDC
36.25”H x 22.5”W x 25”D 378 lb. (172 kg)
96 48 38 21.98 11.76
(921 mm x 572 mm x
110 55 42 25 10.6
635 mm)
496 lb. (225 kg)
128 65 50 29.5 13.7
*Add 12.75” to height with Complete package.
**Add 139 pounds with Complete package.
MILLER®
MLR/2777/2784
GTAW/TIG Welders
Maxstar® & Dynasty® 200 SERIES DC (Maxstar) & AC/DC (Dynasty) TIG & STICK
•Multiple models available. SD model provides basic TIG and Stick functions. DX model adds pulser and sequencer functions. LX model (Maxstar only) adds pulser and sequencer functions and
an automation connection. •Allows for any input voltage hook-up (120–480 V) with no manual linking, providing convenience in any job setting •Blue Lightning™ high-frequency arc starter for
more consistent non-contact starts and greater reliability compared to traditional HF arc starters •Lift-Arc™ provides AC or DC arc starting without the use of high frequency •Hot Start™ adaptive
control provides positive arc starts •Auto-postflow calculates the length of postflow time based on the amperage setting. Eliminates need to independently set postflow time. •Portable with adjustable shoulder strap. Easy to transport at 37 or 45 pounds.
Dynasty welders add AC TIG capabilities and the following AC features: •Waveforms for advanced squarewave, soft squarewave, sine wave and triangular wave •Balance control to provide
adjustable oxide removal enabling high-quality aluminum TIG welds •Frequency to control arc cone width and improve directional control of arc
Processes:
• TIG (GTAW) • Stick (SMAW) • Pulsed TIG (GTAW-P) except SD model • Air Carbon Arc (CAC-A)
8 ft. (2.4 m) power cord (no plug), Two 50-mm Dinse connectors, One air-cooled TIG torch connector
(except Maxstar LX), and Setup DVD
Contractor Packages Come with:
8 ft. (2.4 m) power cord (no plug), Two 50-mm Dinse connectors, One air-cooled TIG torch connector, Setup DVD, and Contractor kit with remote control (fingertip or foot)
Complete Packages Come with:
8 ft. (2.4 m) power cord (no plug), Two 50-mm Dinse connectors, One air-cooled TIG torch connector, Setup DVD, 2-wheel trolley cart, Coolmate™ 1, Coolant (1 one-gallon bottle), Remote control
(fingertip, foot or wireless foot), and Weldcraft™ W-250 (WP-20) water-cooled torch kit
Dynasty 200
Part No. 907099, SD Machine only
Part No. 907099011, DX Machine only
Part No. 951175, DX Contractor w/fingertip
Part No. 951174, DX Contractor w/foot
Part No. 951140, DX Complete w/fingertip
Part No. 951139, DX Complete w/foot
Part No. 951397, DX Complete w/wireless foot
Steel Welding Capability
Min - 0.004” (0.1 mm)
Max - 1/4” (6.4 mm)
AC/DC
Dynasty 200
DC
Part No. 300480, 2-Wheel Trolley Cart.
Part No. 195055, Contractor Kits with RCCS-14 finger control.
Part No. 195054, Contractor Kits with RFCS-14 HD foot control.
Part No. 300185, Weldcraft™ W-250 (WP-20) Water-Cooled Torch Kit.
Part No. 043688, RCCS-14 fingertip control.
Part No. 194744, RFCS-14 HD foot control.
Part No. 300429, Wireless foot control.
Maxstar 200
Maxstar 200
Part No. 903701, SD Machine only.
Part No. 903701011, DX Machine only.
Part No. 951173, DX Contractor w/fingertip.
Part No. 951172, DX Contractor w/foot.
Part No. 951138, DX Complete w/fingertip.
Part No. 951137, DX Complete w/foot.
Part No. 951396, DX Complete w/wireless foot.
Part No. 903701012, LX Machine only.
Welding
Input
Welding
Rated Output
Process Power Amp Range
TIG
3-phase
1–200
1-phase
1–200
1-150 (120V) 150 A at 16 V, 70% duty cycle
Stick
3-phase
1–200
1-phase
1–200
1–90
TIG
3-phase
1–200
1-phase
1–200
1–150
Stick
3-phase
1–200
1-phase
1–200
1–105
(Dynasty Only)
Min - 0.020” (0.5 mm)
Max - 1/4” (6.4 mm)
Amps Input at Rated Load Output, 50/60 Hz
Max. Open115 V 230 V 400 V 460 V KVA KW Circuit Voltage
—
11 6
5 4.2 4.0
80 VDC
—
17 — — 4.0 4.0
(9–14*)
30 14 — — 3.4 3.4
—
13 7
6 5.2 5.0
—
22 — — 5.0 5.0
34 —
—
— 4.0 3.8
—
10 6
5 3.8 3.6
80 VDC
—
16 —
8 3.6 3.6 (5–10 VDC*)
31 —
— — 3.6 3.5
—
13 8
6 4.8 4.6
—
20 — 10 4.7 4.7
31.3 — — — 3.6 3.6
Machine Only
Dimensions
Machine Only
Net Weight
13.5”H x 7.5”W x 17.5”D 37 lb. (16.8 kg)
(343 mm x 191 mm x
445 mm)
13.5”H x 7.5”W x 21.5”D 45 lb. (20.5 kg)
(343 mm x 191 mm x
546 mm)
Note: Duty cycle is limited on 120 V power. Coolmate 1 must be plugged into a 120 V source (wall).
*Sense voltage for Low OCV Stick and Lift-Arc™ TIG.
MILLER®
MLR/2777/2784
GTAW/TIG Welders
Maxstar is DC only.
•Base and DX models available. Base model provides essential TIG and Stick functions. DX model adds extended ranges to sequencer, full trigger options, and full preflow and pulser functions.
•Allows for any input voltage hook-up (208–575 V) with no manual linking, providing convenience in any job setting •Blue Lightning™ high-frequency arc starter for more consistent non-contact
starts and greater reliability compared to traditional HF arc starters •Lift-Arc™ provides AC or DC arc starting without the use of high frequency •Hot Start™ adaptive control provides positive arc
starts •Auto-postflow calculates the length of postflow time based on the amperage setting. Eliminates need to independently set postflow time. •Pro-Set™ provides the speed, convenience and
confidence of preset parameters for balance, frequency, pulse and DIG •Sleep timer conserves energy by powering down system if left idle for a user-adjustable amount of time •Memory card port
for easy software updates and expansions •Optional Cooler Power Supply (CPS) is an integrated 120-volt dedicated-use receptacle to power the Coolmate™ 1.3. The power switch on the power
source also activates the receptacle to help prevent torch failure.
Dynasty welders add AC TIG capabilities and the following AC features (limited on base model): •Waveforms for advanced squarewave, soft squarewave, sine wave and triangular wave
•Balance control to provide adjustable oxide removal enabling high-quality aluminum TIG welds •Frequency to control arc cone width and improve directional control of arc
Processes:
Steel Welding Capability Aluminum Welding Capability
•TIG (GTAW) • Stick (SMAW) • Pulsed TIG (GTAW-P) • Air Carbon Arc (CAC-A)
Min - 0.004” (0.1 mm)
(Dynasty Only)
Max - 3/8” (9.5 mm)
Min - 0.012” (0.3 mm)
8 ft. (2.4 m) power cord (no plug), Two 50-mm Dinse connectors, and Quick reference guide (Dynasty 280 model only)
Max - 3/8” (9.5 mm)
Complete Packages Come with:
8 ft. (2.4 m) power cord (no plug), Quick reference guide (Dynasty 280 model only), Small Runner™ cart, Coolmate™ 1.3, Coolant (4 one-gallon bottles), Remote control (foot or wireless foot), and
Weldcraft™ W-280 (WP-280) water-cooled torch kit
Maxstar® & Dynasty® 280 Series DC (Maxstar) & AC/DC (Dynasty) TIG & STICK
Maxstar 280
Part No. 907552, Base Machine only.
Part No. 907538, Base Machine only with CPS.
Part No. 907553, DX Machine only
Part No. 907539, DX Machine only with CPS
Dynasty
280
AC/DC
DC
Maxstar
280
Dynasty 280
Part No. 907550, Base Machine only.
Part No. 907537, Base Machine only with CPS.
Part No. 951466, Base Complete with foot and CPS.
Part No. 907551, DX Machine only.
Part No. 907514, DX Machine only with CPS.
Part No. 951468, DX Complete with foot and CPS.
Part No. 951469, DX Complete with wireless foot and CPS.
Welding
Process
TIG
Stick
TIG
Stick
Input
Welding
Power Amp Range
3-phase
1–280
1-phase
3-phase
5–280
1-phase
3-phase 1–280 (DC)
1-phase 2–280 (AC)
3-phase
5–280
1-phase
Part No. 300988, Small Runner™ Cart.
Part No. 300972, Coolmate™ 1.3.
Part No. 195055, Contractor Kit with RCCS-14 finger control.
Part No. 195054, Contractor Kit with RFCS-14 HD foot control.
Part No. 300185, W-250 (WP-20) Weldcraft™ Water-Cooled Torch Kit.
Part No. 300990, W-280 (WP-280) Weldcraft™ Water-Cooled Torch Kit.
Part No. 301268, W-375 Weldcraft™ Water-Cooled Torch Kit.
Rated Output
235 A at 19.4 V, 60% duty cycle*
Max. OpenMachine Only
Dimensions
17 15 9
7
6
6.2 6.0
60 VDC
13.6”H x 8.6”W x 22.5”D
28 26 15 13 10 6.0 6.0
(11 VDC**)
(346 mm x 219 mm x
20 18 10 9
7
7.2 7.0
569 mm)
30 27 15 13 10 6.2 6.2
60 VDC
19 17 10 9
7
7.0 6.7
(11 VDC**)
33 30 17 15 12 6.9 6.8
22 20 11 10 8
8.2 7.9
34 31 17 15 12 7.1 7.0
Machine Only
Net Weight
47 lb. (21.3 kg)
50 lb. (22.7 kg)
with CPS
52 lb. (23.6 kg)
55 lb. (25 kg)
with CPS
*Refer to owner’s manual for 208 V output ratings and duty cycle.
**Sense voltage for Low OCV Stick and Lift-Arc™ TIG.
MILLER®
MLR/2777/2784
GTAW/TIG Welders
Maxstar & Dynasty 350 & 700 DC (Maxstar) & AC/DC (Dynasty) TIG & STICK
®
®
AC/DC
DC
•Allows for any input voltage hook-up (208–575 V) with no manual linking, providing convenience in any job setting •Blue Lightning™
high-frequency arc starter for more consistent non-contact starts and greater reliability compared to traditional HF arc starters •LiftArc™ provides AC or DC arc starting without the use of high frequency •Hot Start™ adaptive control provides positive arc starts
•Auto-postflow calculates the length of postflow time based on the amperage setting. Eliminates need to independently set postflow
time. •120-volt auxiliary power dual receptacle to power cooling system or small tools •Program memory features nine program
memories that maintain/save your parameters •High-speed DC TIG pulse controls capable of 5000 pulses per second
Dynasty welders add AC TIG capabilities and the following AC features: •Waveforms for advanced squarewave, soft squarewave, sine wave and triangular wave •Balance control to provide adjustable oxide removal enabling high-quality aluminum TIG welds
•Frequency to control arc cone width and improve directional control of arc •AC amplitude/amperage allows EP and EN amperages
to be set independently to precisely control heat input to the work and electrode
Processes:
•TIG (GTAW) • Stick (SMAW) • Pulsed TIG (GTAW-P) • Air Carbon Arc (CAC-A)
350 Models Come with:
8 ft. (2.4 m) power cord (no plug), Two 50-mm Dinse connectors (350), and Setup video and reference guide
700 Models Come with (Power cord NOT included):
Thread-lock torch connector, Two thread-lock weld cable connectors, and Setup video and reference guide
Complete Packages Come with Above Plus:
Runner™ cart, Coolmate™ 3.5, Coolant (4 one-gallon bottles), Remote control (foot or wireless foot), and Weldcraft™ water-cooled
torch kit
(350: W-375, 700: W-400)
Part No. 907334, Maxstar 350, Machine only.
Part No. 300244, Runner™ Cart.
Part No. 951624, Maxstar 350, Complete with foot.
Part No. 300245, Coolmate™ 3.5.
Part No. 951625, Maxstar 350 ,Complete with wireless foot.
Part No. 907103, Maxstar 700, Machine only.
Part No. 300185, W-250 (WP-20) Weldcraft™ Water-Cooled Torch Kits.
Part No. 907204, Dynasty 350, Machine only.
Part No. 301268, W-375 Weldcraft™ Water-Cooled Torch Kits.
Part No. 951626, Dynasty 350, Complete with foot.
Part No. 300186, W-400 (WP-18SC) Weldcraft™ Water-Cooled Torch Kits.
Part No. 951627, Dynasty 350, Complete with wireless foot.
Part No. 907101, Dynasty 700, Machine only.
Part No. 951403, Dynasty 700, Complete with foot.
Part No. 951404, Dynasty 700, Complete with wireless foot.
Model
No.
Maxstar 350
Input
Welding
Rated Output
Power Amp Range
3-phase
3–350
1-phase
3–350
Maxstar 700
3-phase
1-phase
5–700
5–700
Dynasty 350
3-phase
1-phase
3–350
3–350
Dynasty
700
3-phase 1-phase
5–700
5–700
Maxstar is DC only.
Model 350: Min - 0.012” (0.3 mm)
Max - 5/8” (15.9 mm)
Model 700: Min - 0.020” (0.5 mm)
Max - 1” (25.4 mm)
(Dynasty Only)
Model 350: Min - 0.015” (0.4 mm)
Max - 5/8” (15.9 mm)
Model 700: Min - 0.020” (0.5 mm)
Max - 1” (25.4 mm)
Max. OpenMachine Only
Dimensions
24.75”H x 13.75”W x
75 VDC
33 30 17 15 12 12.0 11.5
41 37
— 19 15 8.6 8.2 (10 –15 VDC*) 22”D (629 mm x 349 mm
x 559 mm)
34.5”H x 13.75”W x 22”D
89 80
46 40 32 32 31
75 VDC
106 96 —
48 38 22 21 (10 –15 VDC*) (876 mm x 349 mm x
559 mm)
24.75”H x 13.75”W x
60 VDC
35 32 16 16 13 12.7 12.1
(11 VDC*) 22”D (629 mm x 349 mm
47 43 — 21 17 9.8 9.1
x 559 mm)
75 VDC
34.5”H x 13.75”W x 22”D
97 88 51 44 35 35 34
115 104 — 52 42 24 22 (10 –15 VDC*) (876 mm x 349 mm x
559 mm)
Machine Only
Net Weight
135 lb. (61 kg)
198 lb. (90 kg)
135 lb. (61 kg)
198 lb. (90 kg)
*Sense voltage for Low OCV Stick and Lift-Arc™ TIG.
Weldcraft™ Tungsten
Tungsten for the most demanding TIG welding applications! Available in four types and industry-standard diameters, the line of Weldcraft tungsten electrodes has under gone rigorous testing to ensure the highest quality and durability. Colour-coded packages include ten 7” (175 mm) tungsten electrodes.
2% Ceriated (EWCe-2)
Performs well in DC welding and arc starting
at low-current settings, and offers excellent
performance in AC processes.
Part No. WC040X7, 0.040” (1.0 mm).
Part No. WC116X7, 1/16” (1.6 mm).
Part No. WC332X7, 3/32” (2.4 mm).
Part No. WC018X7, 1/8” (3.2 mm).
Part No. WC532X7, 5/32” (4.0 mm).
2% Lanthanated (EWLa-2)
Provides excellent arc starting, arc stability and
re-ignition, and less tip erosion in AC or DC
welding. Can substitute for 2% Thoriated.
Part No. WL2040X7, 0.040” (1.0 mm).
Part No. WL2116X7, 1/16” (1.6 mm).
Part No. WL2332X7, 3/32” (2.4 mm).
Part No. WL2018X7, 1/8” (3.2 mm).
Part No. WL2532X7, 5/32” (4.0 mm).
Pure (EWP)
Forms a clean, balled end when heated and
provides good arc stability for AC welding with
a balanced or unbalanced squarewave or
sine wave.
Part No. WP116X7, 1/16” (1.6 mm).
Part No. WP332X7, 3/32” (2.4 mm).
Part No. WP018X7, 1/8” (3.2 mm).
Rare Earth (EWG)
Combines the best of all alloying elements,
and provides excellent arc stability in AC or
DC welding.
Part No. WG116X7, 1/16” (1.6 mm).
Part No. WG332X7, 3/32” (2.4 mm).
Part No. WG018X7, 1/8” (3.2 mm).
MILLER®
MLR/2784
Weldcraft™ TIG Torches
Synonymous with versatility and performance, Weldcraft TIG torches can handle the most intricate to the most demanding TIG welding challenges.
From 125-amp hand-held MicroTIG® torches to 900-amp machine-held water-cooled models, there’s a Weldcraft torch for nearly every TIG application.
Weldcraft™ A-125 SERIES TORCHES - AIR-COOLED
•Air-cooled torches designed for optimal control while welding thin-gauge materials, especially in hard-to-reach
places •The lightweight body reduces fatigue and downtime, and increases operator comfort •Perfected control.
The gas valve in the A-125 Valve offers improved shielding gas control. •Flexibility. Using the A-125 Flex, the flexible
neck easily adjusts to any angle for improved torch control. •The pencil-style model without a back cap allows for superior access to confined areas (A-125 Pencil) •Combine the flexible neck and gas valve for welding limited-access
joints using power sources without gas solenoids (A-125 Flex Valve)
Model
A-125
A-125 Valve
A-125 Flex
A-125 Flex Valve
A-125 Pencil
Rubber Part No.
12.5 ft. (3.8 m)
WP-9-12-R WP-9V-12-R WP-9F-12-R WP-9FV-12-R WP-9P-12-R 25 ft. (7.6 m)
WP-9-25-R
WP-9V-25-R
WP-9F-25-R
WP-9FV-25-R
WP-9P-25-R
A-125
2-Piece Rubber Part No.
12.5 ft. (3.8 m)
—
WP-9V-12-2 —
WP-9FV-12-2 —
25 ft. (7.6 m)
—
WP-9V-25-2
—
WP-9FV-25-2
—
Rated Output
DC: 125 A at 60% duty cycle
AC: 100 A at 60% duty cycle
Electrode Range
.020 – 1/8” (0.5 – 3.2 mm)
•Versatile and innovative air-cooled torches designed for maximum comfort in a variety of applications •Diamond
Grip™ head design (A-150 and A-150 Valve) has ergonomic contact points for thumb and fingers. Provides a more
comfortable grip and reduces operator fatigue. •Improve control and comfort with the A-150 Flex and the flexible
neck that allows access into hard-to-reach areas •Maximum versatility. Utilize the Redhead Series torches in a
variety of welding applications without adding expenses. •Ribbed handle and torch design provide cool operation
and maximum operator comfort while reducing downtime caused by operator fatigue •Available with 12.5 or 25 ft.,
single or heavy-duty two-piece cable assembly determined by the compatibility of the power source. Heavy-duty
cable assembly allows use of a larger conductor for the power cable which simplifies repair and replacement making
it ideal for field applications.
Rated Output
Electrode Range
.020 –1/8” (0.5 – 3.2 mm)
Rubber Part No.
Model
Mono-Flex™ Rubber Part No.
12.5 ft. (3.8 m)
25 ft. (7.6 m)
A-150
WP-17-12-R WP-17-25-R
A-150 Valve
WP-17V-12-R WP-17V-25-R
A-150 Flex
WP-17F-12-R WP-17F-25-R
A-150 Flex Valve
WP-17FV-12-R WP-17FV-25-R
WP-R17FV-25-R
A-150 Flex Valve Redhead™ WP-R17FV-12-R A-150 PSH*
—
WP-17-25-R-PSH
A-150 Valve PSH*
WP-17V-12-R-PSH WP-17V-25-R-PSH
12.5 ft. (3.8 m)
WP-17-12-MF —
—
—
—
—
—
25 ft. (7.6 m)
WP-17-25-MF
WP-17V-25-MF
—
—
—
—
—
Part No. 10N23, 1/16” (1.6 mm) Collet.
Part No. 10N31, 1/16” (1.6 mm) Collet Body.
Part No. 10N32, 3/32”(2.4 mm) Collet Body.
Part No. 10N48, #6, 3/8” Alumina Nozzle.
A-150 Valve PSH Part No. 10N46, #8, 1/2” Alumina Nozzle.
Part No. AK-150MFC, Accessory Kit. Allows A-150
torch customization. Converts into 28 different torch
styles while using existing cable. Includes collets,
collet bodies, nozzles, torch heads, handle and more.
Mono-Flex™ Rubber Part No.
25 ft. (7.6 m)
WP-17-25-2
WP-17V-25-2
WP-17F-25-2
WP-17FV-25-2
—
—
—
Model
A-200
A-200 Valve
A-200 Flex
A-200 Flex Valve
Rubber Part No.
12.5 ft. (3.8 m)
WP-26-12-R WP-26V-12-R —
WP-26FV-12-R SP04-20 GREGG DISTRIBUTORS LTD.
Weldcraft™ A-200 SERIES
CONSUMABLES
A-200 Flex Valve
2-Piece Rubber Part No.
25 ft. (7.6 m)
25 ft. (7.6 m)
WP-26-25-R
WP-26-25-2
WP-26V-25-R
WP-26V-25-2
WP-26F-25-RWP-26F-25-2
WP-26FV-25-R
WP-26FV-25-2
Part No. AK1C, Accessory Kit. Includes one
long back cap, one of each size (#4, #5, #6)
alumina nozzle, and one of each size (.040,
1/16”) of the following: collet, collet body, and 7”
2% ceriated tungsten electrode.
CONSUMABLES
12.5 ft. (3.8 m)
WP-17-12-2 WP-17V-12-2
WP-17F-12-2 WP-17FV-12-2 —
WP-17-12-2-PSH
—
•Dependable, top-performing air-cooled torches designed for heavy-duty welding applications •Eliminate the
expense of a water-cooled system. The air-cooled capability pairs reliability with cost-effectiveness for all field
applications. •Robust performance. The heavy copper construction delivers maximum welding capacity for rugged
fieldwork. •Effortless adjustments. The A-200 Valve provides a gas control valve to ensure a quick, easy adjustment
of shielding gas flow. •Flexibility. Using the A-200 Flex, the flexible neck easily adjusts to any angle for better torch
control in limited-access joints. •Combining the flexible neck and gas valve advances capabilities with greater
comfort and control (A-200 Flex Valve)
CONSUMABLES
Rated Output
Electrode Range
.020 – 5/32” (0.5 – 4.0 mm)
Part No. AK3C, Accessory Kit. Includes one
short back cap, one of each size (#5, #6, #8)
alumina nozzle, and one of each size (1/16,
3/32, 1/8”) of the following: collet, collet body,
and 7” 2% ceriated tungsten electrode.
MILLER®
MLR/2778/2784
Engine-Driven Welders
Bobcat™ SERIES - GAS, LP & DIESEL
•The Bobcat engine-driven welder/generators have been the top-selling in their class because they are engineered to be reliable, powerful and durable from the start.
•Quieter and better sound. Gas models deliver significant improvements in sound level and quality for better jobsite communication and a safer, more efficient working environment. By rotating
the engine toward the front we created a more efficient airflow, resulting in significantly quieter operation. You can start jobs earlier, end later, and work around noise-sensitive areas.
•Smaller and lighter design. Bobcat welder/generators take up less space on trucks and trailers — leaving more room for other equipment and tools. Plus, they’re easier to move around
jobsites— even with weld cables and running gear attached.
• Easier maintenance. Easy-to-read front panel maintenance displays show when your equipment needs to be serviced. With the intuitive design, the daily maintenance is fast and easy: •Oil
checks from the top by the front panel •Toolless panels that allow for quick access •Single-side fuel fill and oil drain/filter
•Optional Electronic Fuel Injection (EFI). Available on the Bobcat 250 gas model only. Use up to 27 percent less fuel, saving money and improving your bottom line.
•Smooth power. Better power means better performance. Our Bobcat welder/ generators have smoother power — not the spiked power found with other brands — because of: •Revolutionary
ten-degree skewed-rotor design •Optimized generator performance
•Accu-Rated™– not inflated generator power. Our Accu-Rated peak power is usable for maximum generator loads, including plasma cutters, wire welders and motor starting. It also beats the
competition’s very short-duration peak or surge power. Accu-Rated power delivers: •11,000 watts (12,000 on Bobcat 250 with EFI) of usable peak power •Peak power delivered for a minimum of
30 seconds
•Large 12-gallon fuel capacity means many hours of run time before refueling.
•Versatile AC and DC weld output provides quality welds on all types of metals. DC is smooth and easy to run while AC Stick is used when arc blow occurs.
•Maintenance displays show engine hours and hours left before an oil change is due.
•Heavy-duty construction. All internal components are designed to handle the harshest environments and will run better and last longer.
Processes:
•AC/DC Stick (SMAW) • MIG (GMAW)1 • Flux-Cored (FCAW)1 •AC2/DC TIG (GTAW) • Air Carbon Arc Cutting and Gouging
(CAC-A)3 (rated 3/16”. carbons)
1
With voltage-sensing feeder only.
2
With Dynasty® 200 Series or HF-251 (non-critical).
Part No. 300517, Full KVA Adapter Cord.
3
Bobcat 250 models only.
Part No. 300975, GFCI Panel Mount 120 VAC Duplex Kit.
Engines:
Part No. 300976, Electric Fuel Pump Kit (gas models only).
Gas—Kohler CH730: 23.5 HP at 3600 RPM.
Part No. 300924, Spark Arrestor Kit (gas models only).
EFI Gas—Kohler ECH730: 23 HP at 3600 RPM.
LP—Kohler CH730 (Liquid withdrawal LP system): 21 HP at 3600 RPM. V-twin-cylinder, four-cycle, overhead valve, industrial, air-cooled.
EPA Tier 4 compliant! Diesel—Kubota D722: 19 HP at 3600 RPM. Three-cylinder, industrial, liquid-cooled.
Bobcat™ 225 (Gas)
•Cost-effective, multiprocess machine primarily used for Stick
welding. Great for farm, ranch, maintenance/repair operations
and as a stand-alone generator.
Bobcat™ 3 Phase (Gas)
•Designed for farm and ranch owners in need of single and
three-phase power to run 480 V three-phase pivot irrigation
systems or to provide backup power for home, farm and ranch.
Bobcat™ 250 (Gas, LP or Diesel)
•Rugged multipurpose engine drives are ideal for mobile maintenance trucks where reduced size and weight are essential.
They are great for Stick and Flux-Cored welding, Carbon Arc
gouging, and are designed to handle maintenance/repair,
construction, farm/ranch, and generator use.
•Front panel fuel gauge provides convenient fuel level indication.
•Smoother weld output and better generator power while
welding.
•More weld output than 225-amp welder generators for more
versatility. 72%more power for MIG/FCAW, 67% more for AC
welding, and 11% more for DC Stick.
EFI GAS ENGINE
Electronic fuel injection (EFI) gas engines optimize the air/fuel ratio for all engine speeds and engine loads, resulting in
lower operational costs, fewer emissions, longer runtimes and better performance when compared to carbureted models.
The payback from fuel savings alone is a matter of months.
EFI advantages (vs. carburetor models): •12,000 watts of generator power •Up to 27% better fuel efficiency •Extended
runtimes up to 27% •Fast, easy starts in all climates •Reliable operation, even with infrequent use •Fewer emissions —
27% less CO and 33% lower HC+NOx levels
Welding
Amp/Volt
Process
Rated Output at 104° F (40° C)
Mode
Ranges
Bobcat
907498001 Kohler
CC/AC Stick/TIG
70–150 A 150 A at 25 V, 100% duty cycle
225
907498 Kohler with GFCI
CC/DC Stick/TIG
50– 225 A 225 A at 25 V, 100% duty cycle
CV/DC MIG/FCAW 19– 28 V
Bobcat
CC/AC Stick/TIG
50– 200 A 200 A at 25 V, 100% duty cycle
3 Phase
CC/DC Stick/TIG
50– 210 A 210 A at 25 V, 100% duty cycle
Bobcat
907500001 Kohler
CC/AC Stick/TIG
40– 250 A 250 A at 25 V, 60% duty cycle
40– 275 A w/EFI 225 A at 25 V, 100% duty cycle
250
907500002 Kohler with electric fuel pump* CC/DC Stick/TIG
40– 250 A 250 A at 25 V, 100% duty cycle
907502 EFI Kohler
40– 275 A w/EFI
907504 LP Kohler with GFCI
907565 Kubota with GFCI
CC/AC Stick/TIG
40– 275 A 250 A at 25 V, 100% duty cycle
Bobcat
250
CC/DC
Diesel
Diesel
Gas or LP
Gasoline
Model
Part No.
Features
Net
Weight
Generator Power at
Dimensions
104° F (40° C)
Single-phase
28”H (711 mm)
Peak: 11,000 watts
32.75”H (832 mm) to
Continuous: 9500 watts top of exhaust
Single-phase/Three-phase 20”W (508 mm)
Peak: 11,000 watts
40.5”D (1,029 mm)
Continuous: 9500
485 lb.
(220 kg)
Single-phase
Peak: 11,000 watts
Continuous: 9500 watts
EFI Model
Peak: 12,000 watts
Continuous: 10,500 watts
501 lb.
(227 kg)
watts/10,000 watts
Single-phase
Peak: 11,000 watts
Continuous: 9500 watts
28”H (711 mm)
32.75”H (832 mm)
to top of exhaust
20”W (508 mm)
40.5”D (1,029 mm)
495 lb.
(225 kg)
28”H (711 mm)
638 lb.
32.375”H (873 mm)
(289 kg)
to top of exhaust
20”W (508 mm)
45.375”D (1,153 mm)
*Recommended for operation at altitudes above 5,000 ft.
MILLER®
MLR/2778/2784
Trailblazer® SERIES - GAS, LP & DIESEL
•The Trailblazer welder/generators deliver unbeatable arc performance, the smoothest, most stable arc in the industry and an independent welder and generator power system.
•Long runtimes - Stop less for refueling and get more work done.
•Fuel efficient - Save money and improve your bottom line.
•User friendly - Easy-to-read front panel maintenance displays show when your equipment needs to be serviced. With the intuitive design, the daily maintenance is fast and easy: •Oil checks
from the top by the front panel •Sunvision™ technology that provides easy-to-read digital meter •Toolless panels that allow for quick access •Single-side fuel fill and oil drain/filter
•Quiet - Low sound output — so you can work earlier, later, and around noise-sensitive areas. Up to 68% quieter with the gas models and up to 40% quieter with the diesel model.
•Smart-Cor™ technology - A lighter Trailblazer that takes up less space.
•Arc performance - Three Stick modes — EXX18, EXX10 and Gouge •Two Wire modes — Solid and Flux-Core •Three Lift-Arc™ TIG modes — Auto-Stop™, Auto-Crater™ and Pulse
•Self-calibrating digital weld meters with maintenance displays - Preset and actual weld amperage/voltage •Process settings •Fuel gauge •Hour meter function and oil change interval
•Engine speed (RPM)
•Accu-Rated™– not inflated generator power - The Accu-Rated peak power is usable for maximum generator loads, including plasma cutters,
wire welders and motor starting. It also beats the competition’s very short-duration peak or surge power. Accu-Rated power delivers: •12,000 watts of usable peak power •Peak power delivered
for a minimum of 30 seconds
•Large 12-gallon fuel capacity - means many hours of run time before refueling.
•Heavy-duty construction - All internal components are designed to handle the harshest environments and will run better and last longer.
Processes:
•Stick (SMAW) • MIG (GMAW)1
• Flux-Cored (FCAW)1 • DC TIG/Pulsed TIG (GTAW/GTAW-P)2 • Air Carbon Arc Cutting and Gouging (CAC-A) (rated 3/16” carbons, capable 1/4” carbons)3
1
With wire feeder.
2
Two-piece TIG torch recommended.
3
Trailblazer 325 model only.
Engines:
Gas—Kohler CH730: 23.5 HP at 3600 RPM.
EFI Gas—Kohler ECH730: 23 HP at 3600 RPM.
LP—Kohler CH730 (Liquid withdrawal LP system): 21 HP at 3600 RPM. V-twin-cylinder, four-cycle, overhead valve, industrial, air-cooled.
EPA Tier 4 compliant! Diesel—Kubota D902: 24.8 HP at 3600 RPM. Three-cylinder, industrial, liquid-cooled.
Base Model Exclusive Technologies
Smart-Cor™ technology.
Independent weld and generator power in an improved, more
compact design. Benefits it provides:
•No interaction between jobsite tools and the welding arc
•Stronger, cleaner, more efficient generator power
•Reduced size and weight
•Improved arc performance
Auto-Speed™ technology.
Automatically adjusts the engine speed to run at lower speeds
depending on the total power needed. Benefits it provides:
•Exceptional fuel efficiency
•Extended runtimes
•Quieter operation
•Reduced emissions
Innovative design.
Engine is rotated to the front in the gas model to create more
efficient airflow. Benefits it provides:
•Reduced size and weight
•Easier maintenance
Options To Maximize Your Trailblazer 325 Performance
Excel Power
Excel power improves generator performance by providing
120-volt, 60 hertz of pure sine wave generator power at idle
speed and while welding. When connected to the Excel power
receptacle, you get up to 2400 watts of the cleanest generator
power available. Plus you can run most jobsite tools — like
lights, drills, grinders and chop saws—at idle speed, which
provides:
•Exceptional fuel efficiency
•Extended runtimes
Longer engine life
Diesel
Gasoline
Gas or LP
Model
Part No.
Features
Trailblazer 907506 Kohler with GFCI
275
907509 LP Kohler with GFCI
Trailblazer 907510001 325
907510
907510002 907512 907512001 907512002 Trailblazer 907566001 325 Diesel 907566 907566002 Kohler
Kohler with GFCI
Kohler w/electric fuel pump
EFI Kohler
EFI Kohler with Excel power
EFI Kohler with Excel power
and battery charge/jump start
Kubota
Kubota with GFCI
Kubota with Excel power
Part No. 130831, Spoolmatic® 30A Control
Part No. 137549, WC-24 Control
Part No. 300517, Full KVA Adapter Cord (pg 103)
Part No. 300976, Electric Fuel Pump Kit* (gas models only)
EFI (Gas Models)
Electronic fuel injection (EFI) maximizes performance by optimizing the air/fuel ratio for all engine speeds and loads. Choose
EFI for:
•Up to 27% better fuel economy
•Extended runtimes up to 27%
•Fast, easy starts in all climates
•Reliable operation, even with infrequent use
•Fewer emissions — 27% less CO and 33% lower HC+NOx
levels
Welding
Mode
CC/DC
Battery Charge/Jump Start (Gas Models)
Reduce downtime with battery charge/jump start capability.
Designed and recommended for mechanics or anyone
else responsible for a fleet of trucks or equipment. By
using your Trailblazer to charge dead batteries or jump a
stubborn engine, you’ll keep your crew working and the
fleet up and running.
Amp/Volt
Ranges
10– 275 A
CV/DC MIG/FCAW
10– 35 V
CC/DC
10– 325 A
CV/DC MIG/FCAW
10– 35 V
CC/DC
10– 325 A
10– 35 V
Process
Stick/TIG
Stick/TIG
Stick/TIG
CV/DC MIG/FCAW
Single-Phase Generator
Power at 104° F (40° C)
Peak:
12,000 watts
11,000 watts (LP)
Continuous:
10,500 watts
9500 watts (LP)
Excel Power (optional)
2400 watts
20 A at 120 V, 60 Hz
pure generator power
at idle speed and while
welding.
Dimensions
28”H (711 mm)
32.75”H (832 mm) to top
of exhaust
20”W (508 mm)
40.5”D (1,029 mm)
28”H (711 mm)
32.75”H (832 mm)
to top of exhaust
20”W (508 mm)
40.5”D (1,029 mm)
Net
Weight
459 lb.
(208 kg)
460 lb.
(209 kg)
28”H (711 mm)
34.375”H (873 mm) to top 620 lb.
of exhaust
(281 kg)
20”W (508 mm)
45.375”D (1,153 mm)
MILLER®
MLR/2778/2784
Blue Star 185 - GASOLINE
®
•Reliable outdoor portable power! Great for farm, ranch, maintenance, construction and hobbyist •Compact and portable, its
small footprint uses little truck space •Optional running gear also makes the Blue Star one-man portable •Stick and TIG capable
•Accu-Rated™ peak generator power is usable for maximum generator loads such as plasma cutting, Millermatic® MIG welders
and motor starting •Includes electric start, 120 VAC GFCI and 240 VAC receptacles, 6.25-gallon fuel capacity, auto-idle and
engine hour meter
Processes:
• Stick (SMAW) • TIG (GTAW)
Engine:
Gasoline engine - Kohler CH440: 13.4 HP at 3600 RPM. One-cylinder, four-cycle, OHV, air-cooled
Part No. 907664, Blue Star® 185.
Part No. 195353, Lifting Eye.
Part No. 301246, Running Gear.
Welding
Welding Amperage
Dimensions
Net Weight
Rated Output
Mode
Process
Range
Power at 104° F (40° C)
24.75”H x 20.625”W x 31.25”D 296 lb. (134 kg)
CC/DC
DC Stick/TIG 60–195 185 A at 25 V, 20% duty cycle
Peak: 6500 watts
150 A at 25 V, 100% duty cycle Continuous: 6200 watts (629 mm x 524 mm x 794 mm)
Trailblazer® 302 Air Pak™ - GASOLINE
•Powerful all-in-one tool designed for repair and construction with multiprocess weld quality, generator power, air compressor and
battery charge/jump start •Superior arc performance. Preset dig settings optimized for the majority of Stick welding applications,
best-in-class Wire arc performance, and two Lift-Arc™ TIG modes for most DC TIG applications •Strongest combined generator/
compressor power. Delivers an industry-leading 13,000 watts of peak generator power independent of weld settings — can
power a Spectrum® 875 plasma cutter, and provide air for plasma cutting at the same time (rated 5/8” mild steel). •Rotary screw
air compressor. Delivers up to 31 CFM and 160 PSI of air with no storage tank. Gives 100% deliverable air and runs many
tools at idle speed. Air outputs are rated at an industry-high 40°C (104°F). Front panel air pressure adjustment and automatic
overpressure shutdown with indication. Designed for more than 30,000 hours of operation and warranted for three years by
Miller. •Battery charge/jump start. Provides selectable 12 or 24-volt battery charging capability with up to 450 amps of battery
jump-starting capability. Convenient front panel battery charger/jump starter access.
Processes:
• AC/DC Stick (SMAW) • MIG (GMAW)1 • Flux-Cored (FCAW)1 •AC2/DC3 TIG (GTAW) • Air Carbon Arc Cutting and Gouging
(CAC-A) (rated 3/16” carbons, capable 1/4” carbons)
1
With wire feeder.
2
With Dynasty® 200 Series or HF-251 (non-critical).
3
Two-piece TIG torch recommended.
Engine:
Gasoline - Kohler CH750: 27 HP at 3600 RPM. V-twin-cylinder, four-cycle, overhead valve, industrial, air-cooled.
Part No. 907549001, Kohler.
Part No. 907549, Kohler with GFCI and electric fuel pump.
Part No. 907549003, Kohler with GFCI, cooler/separator and electric fuel pump.
Part No. 130831, Spoolmatic® 30A Aluminum Spool Gun.
Part No. 137549, WC-24 Control.
Welding
Amp/Volt
Process
Mode
Ranges
CC/DC
Stick/TIG
10– 300 A
CV/DC
MIG/FCAW 13– 35 V, 350 A
CC/AC
TIG/Stick
10– 225 A
Power at 104° F (40° C)
Peak: 13,000 watts
Continuous: 11,000
watts
Air Compressor
Rotary screw with electric clutch for on/off. Oil change
intervals 500 hours.
Free Air Delivery @
3600 RPM: 31 CFM (0.88 m3/min.)
3000 RPM: 28 CFM (0.79 m3/min.)
2400 RPM (Idle): 22 CFM (0.62 m3/min.)
Working Pressure Constant: 80–160 PSIG
Duty Cycle: 100%
Oil Capacity: 1.75 qt. (1.7 L)
Dimensions
Net Weight
28”H (711 mm)
34.5”H (876 mm) to top of exhaust 771 lb. (350 kg)
20”W (508 mm)
59.625”D (1514 mm)
Big Blue® 350 PipePro - DIESEL
•Designed for transmission pipeline work, this system offers a complete welding solution. With Stick as well as MIG/FCAW
welding capabilities it is ideal for the most demanding pipeline jobs. •Easy arc starts and better arc control provide improved
performance to produce more consistent welds •Enhanced MIG/FCAW arc control for best in class performance •The Vault—
ultimate control board reliability. A sealed aluminum case protects the circuit board from dust, dirt, moisture and heat. •Low OCV
Stick (VRD) for improved operator safety without compromising arc starts •Auto Remote Sense™ (ARS) eliminates confusion
of a remote/panel switch •Compact size and weight optimizes truck space •LINE-X® cover provides superior impact, corrosion
and abrasion protection •Quiet operation. Only 70.7 decibels under full load. •Improves jobsite communication and safety •EPA,
CSA, IEC and NEMA compliant •Standard features include digital preset weld meters, auto idle, 120-volt block heater and output
contactor control •Optional stainless steel package available
Processes:
•Stick (SMAW) •MIG (GMAW) •Flux-Cored (FCAW) •TIG (GTAW) •Air Carbon Arc Cutting and Gouging (CAC-A) (rated 1/4”
carbons)
Engines:
Diesel EPA Tier 4 Final choices
CAT C1.5T: 24.7 HP at 1800 RPM. Turbo 3-cylinder, industrial, liquid-cooled.
Mitsubishi S4L2: 24.7 HP at 1800 RPM. Four-cylinder, industrial, liquid-cooled.
Part No. 907478, Big Blue 350 PipePro with CAT Turbo engine drive.
Part No. 907478001, Big Blue 350 PipePro with CAT Turbo engine drive with stainless steel.
Part No. 907428, Big Blue 350 PipePro with Mitsubishi engine drive.
Part No. 907428001, Big Blue 350 PipePro with Mitsubishi engine drive with stainless steel.
Welding
Process
Mode
CC/DC
TIG/Stick
CV/DC
MIG/FCAW
Amp/Volt
Ranges
20–400 A
14–40 V
Power at 104° F (40° C)
Peak: 12,000 watts
Continuous: 10,000
watts
Dimensions
Net Weight
32”H x 26.25”W x 56”D
(813 mm x 667 mm x 1,422 mm)
Caterpillar: 1,063 lb. (482 kg)
Mitsubishi: 1,018 lb. (462 kg)
MILLER®
MLR/2778/2784
Big Blue® 400 Pro - DIESEL
•Clean, quiet and reliable low-speed EPA-compliant diesel is more efficient than ever before. Ideal for construction, piping and
fleet use. •400-amp output now available in a compact package. Provides up to 400 amps at 100% duty cycle. •The Vault—
ultimate control board reliability. A sealed aluminum case protects the circuit board from dust, dirt, moisture and heat. •Low OCV
Stick (VRD) for improved operator safety without compromising arc starts •Tailored arc control (DIG) allows arc characteristics to
be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010. •Quiet operation.
Only 71.6 decibels (96 Lwa) under full load. Improves jobsite communication and safety. •CSA, IEC and NEMA compliant •Standard features include digital weld meters, auto idle, 120-volt block heater and output contactor control
Processes:
• Stick (SMAW) • MIG (GMAW) • Flux-Cored (FCAW) • TIG (GTAW) • Air Carbon Arc Cutting and Gouging (CAC-A) (rated 3/16”
carbons)
Engines:
Diesel EPA Tier 4 Final choices
Kubota V1505: 20.2 HP at 1800 RPM. Four-cylinder, industrial, liquid-cooled.
Part No. 907606, Big Blue® 400 Pro with Kubota engine.
Part No. 907605, Big Blue® 400 Pro with Mitsubishi engine.
Welding
Process
Mode
CC/DC
TIG/Stick
CV/DC
MIG/FCAW
Amp/Volt
Ranges
20–400 A
14–40 V
Power at 104° F (40° C)
Peak: 12,000 watts
Continuous: 10,000
watts
Dimensions
Net Weight
32”H x 26.25”W x 56”D
(813 mm x 667 mm x 1,422 mm)
Kubota 950 lb. (431 kg)
Mitsubishi 993 lb. (450 kg)
Big Blue® 450 Duo CST™ - DIESEL
•Durable dual-operator welder/generator delivers proven CST 280 Stick/TIG performance for maximum productivity and efficiency.
Two separate outputs powered by one low-speed diesel engine delivers 280 amps of output per operator. •Two superior arcs in
one compact package •Save fuel, reduce maintenance costs and increase productivity •Quiet operation. At 72.2 decibels at 23
ft. (7 m) under full load, it’s quieter than most single-operator models. Improves jobsite communication and safety. •Vandalism
lockout kit. Lockable hinged steel panel protects front control and ignition switch. •Simple-to-operate process selector knob automatically sets proper DIG setting on E6010 and E7018 electrodes providing superior Stick performance •Lift-Arc™ start for TIG
starts without the use of high frequency •Remote amperage control permits the use of standard and wireless amperage control
devices •Increased efficiency. More arcs and better fuel economy equal increased profits for your business. Estimated savings
are 34% with a dual-operator unit versus two single-operator units.
Processes:
• Stick (SMAW) • TIG (GTAW) • Air Carbon Arc Cutting and Gouging (CAC-A) (rated 3/16” carbons, capable 1/4” carbons)
Engines:
EPA Tier 4 Final
Part No. 907477, Big Blue® 450 Duo CST.
Part No. 119172, Single-Phase Full KVA Plug Kit.
Process
Output Mode
Amperage Range
Rated Output at 122°F (50°C)
Power at 122°F (50°C)
Dimensions
Net Weight
DC Stick/TIG Separate (dual outputs) 5–225 A (each side) 175 A at 27 VDC, 100% duty cycle
32”H x 26.25”W x 56”D 1,064 lb. (483 kg)
Continuous: 10,000 watts (813 mm x 667 mm x
5– 280 A (one side only)
Paralleled (combined)
10– 450 A
1,422 mm)
MILLER®
MLR/2779/2784
Plasma Cutter Welders
Spectrum SERIES PLASMA CUTTERS
375 XT/625 XT
875/875 Auto-Line
•Power Factor Correction (PFC). Uses less energy by utilizing input power more efficiently and increases productivity by reducing nuisance circuit breaker trips •LED indicators for easy troubleshooting •Non-high-frequency arc starting does not interfere with or damage controls or computers •Postflow cooling circuitry extends life of the consumable and torch by cooling them with
postflow air after trigger is released •Auto-Refire™ provides ultimate convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal •Built-in gas/
air filter and regulator. Provides air filtration of airborne particles five microns and larger. Additional filtration and water separation recommended. •LVC™ line voltage compensation provides peak
performance power under variable input voltage conditions for clean, steady cuts •Wind Tunnel Technology™ prevents abrasive dust and particles from damaging internal components •Fan-OnDemand™ cooling system only operates when needed, reducing the amount of airborne dust/dirt pulled through the unit •Quick connect flexible work cable with heavy-duty clamp
Spectrum® 625 And 875/875 Auto-Line Hand-Held And Machine Torches: •Ultra-Quick Connect™ hand-held torches with flexible cables. XT40 (625 X-TREME™) and XT60 (875 models)
hand-held torches feature quick torch connection, ergonomic handles to help prevent operator fatigue and flexible cables that make maneuvering easier •Machine torch capable. 625 X-TREME™
and both 875 models can be ordered with a machine torch or can be converted to use a machine torch with optional Automation Kits •Long and short body machine torches. XT40M (625 XTREME™) and XT60M (875 models) machine torches are available in long or short body configurations. XT60M is also available in 25 or 50 ft. cable lengths.
Processes:
•Air Plasma Cutting • Air Plasma Gouging (625/875 models)
®
Spectrum® 375 X-TREME™/625 X-TREME™
•Allows for any input voltage hook-up (120– 240 V, singlephase, 50/60 Hz for 375 XT and 60
Hz for 625 XT) with no manual linking, providing convenience in any job setting •X-CASE™
provides the ultimate protection during transport and storage. Additional space is ideal for MVP
plugs, consumables box, gloves, etc. •Multi-voltage plug (MVP™) on 375 XT or MVP™ adapter
on 625 XT allows connection to 120 or 240-volt receptacles without tools •Automatic air regulation compensates for input pressure variation to provide constant recommended torch pressure
for optimum cutting performance •Automatic gouging consumable detection (625 XT only).
Detects gouging consumable and adjusts gas pressure to optimize performance, eliminating
the need for a manual regulator. •375 XT model includes XT30 hand-held torch with ergonomic
design and flexible cable •625 XT model includes Ultra-Quick Connect™ XT40 hand-held torch
with ergonomic design and flexible cable; or XT40M long body or short body machine torch
375 X-TREME Comes Complete with:
XT30 hand-held torch with 12 ft. (3.7 m) cable, Heavy-duty work clamp with 12ft. (3.7 m) flexible
cable, 10 ft. (3 m) power cord with MVP 5-15P (120 VAC, 15 A) and 6-50P (240 V, 50 A) plugs,
X-CASE for protection and storage, Shoulder strap, and Consumables box with two electrodes,
two tips, deflector and air fitting
625 X-TREME Comes Complete with:
XT40 hand-held torch with 12 ft. (3.7 m) or 20 ft. (6.1 m) cable; OR XT40M long body or short
body machine torch with 25 ft. (7.6 m) cable, Heavy-duty work clamp and flexible cable with
quick connect, 12 ft. (3.7 m) power cord with 240 V, L6-30P twist lock plug, MVP adapters with
5-15P (120 VAC, 15 A) and 6-50P (240 V, 50 A) plugs, X-CASE for protection and storage,
Shoulder strap, Consumables box with two electrodes, two 40 A tips and one 30 A tip, 30 A drag
shield, deflector and air fitting, and Machine torch packages include corresponding automation
kit
Model No.
Hand-Held Torch Packages Part No.
Spectrum® 875/875 Auto-Line™
•Spectrum 875 Auto-Line model allows for any input voltage hook-up (208 – 575 V, single- or
three-phase) with no manual linking, providing convenience in any job setting. Standard Spectrum 875 model operates on 208/230 V, single-phase input voltage only. •Consumables storage
compartment provides convenient access to consumables and parts.
•Automatic air regulation compensates for input pressure variation to provide constant recommended torch pressure for optimum cutting performance •Includes Ultra-Quick Connect™ XT60
hand-held torch with ergonomic design and flexible cable; or XT60M long body or short body
machine torch
875 and 875 Auto-Line Comes Complete with:
XT60 hand-held torch with 20 ft. (6 m) or 50 ft. (15.2 m) cable; OR XT60M long body or short
body machine torch with 25 ft. (7.6 m) or 50 ft. (15.2 m) cable, Heavy-duty work clamp and
flexible cable with quick connect, 10 ft. (3 m) power cord, Extra consumables, and Machine torch
packages include corresponding automation kit
Machine Torch Packages Part No.
25 ft. (7.6 m)
50 ft. (15.2 m)
Long Body Short Body Long Body Short Body
—
—
—
—
907579002 907579003
—
—
907583002 907583003
—
—
907584002 907584003
907584005 907584004
12 ft. (3.7 m) 20 ft. (6.1 m) 50 ft. (15.2 m)
Spectrum 375 XT
907529
—
—
Spectrum 625 XT
907579
907579001
—
Spectrum 875
—
907583
907583001
Spectrum 875 AL
—
907584
907584001
AUTOMATION KITS
Converts hand-held torch packages to add machine torch capabilities. Machine torches are NOT included in automation kits and
must be ordered separately.
Part No. 301158, Spectrum 625 X-TREME Automation Kit. Requires a Spectrum 625 X-TREME with Ultra-Quick Connect™
feature for unit to be converted for use with long or short body machine torches.
Part No. 301156, Spectrum 875 Automation Kit.
Part No. 301157, Spectrum 875 Auto-Line Automation Kit. Includes remote pendant control for manual on/off.
Model No.
Input Power
Spectrum 375 X-TREME Single-phase
120– 240 VAC, 50/60 Hz
Spectrum 625 X-TREME Single-phase
120– 240 VAC, 60 Hz
Spectrum 875
Single-phase
208/230 VAC, 50/60 Hz
Spectrum 875 Auto-Line
Three-phase
208– 575 VAC, 50/60 Hz
Single-phase
Amps Input at
Rated Output
120 V (15 A): 20 A at 88 VDC, 35% duty cycle
18.1
25.6
240 V: 40 A at 140 VDC, 50% duty cycle
13.6
18.1
25.6
13.6
208 V: 47
230 V: 42
208 V: 27.5
230– 380 V: 60 A at 140 VDC, 50% duty cycle
230 V: 25
380 V: 15
460 V: 12.4
575 V: 9.8
208 V: 47.4
230 V: 42.2
Rated Output at 40°C (104°F)
Only 875 Auto-Line has 3-Phase capabilities.
KVA
KW
2.2
3.1
3.3
2.2
3.0
6.4
9.9
2.1
3.0
3.1
2.1
2.9
6.3
9.8
9.9
9.4
9.9
9.7
Rated Cutting Capacity
375 XT: Steel/ Stainless - 3/8” (9.5 mm)
Aluminum - 1/4” (6.4 mm)
625 XT: Steel/ Stainless - 5/8” (15.9 mm)*
875/875 AL: Steel/ Stainless - 7/8” (22.2 mm)
*Stainless: 1/2” (12.7 mm) for Spectrum 625 X-TREME.
Compressor
Requirement
5.0 CFM
(142 L/min.)
at 90 PSI
(621 kPa)
6.0 CFM
(170 L/min.)
at 90 PSI
(621 kPa)
6.75 CFM
(191 L/min.)
at 90 PSI
(621 kPa)
Dimensions
9”H x 5.5”W x 13.25”D
(229 mm x 140 mm x
337 mm)
9”H x 5.5”W x 13.25”D
(229 mm x 140 mm x
337 mm)
13.5”H x 8.75”W x 18.5”D
(343 mm x 222 mm x
470 mm)
Net Weight
with Torch
19 lb. (8.6 kg)
12 ft. 21 lb. (9.5 kg)
20 ft. 23 lb. (10.5 kg)
25 ft. 24 lb. (10.7 kg)
20 ft. 49 lb. (22.2 kg)
50 ft. 58 lb. (26.3 kg)
20 ft. 54 lb. (24.5 kg)
25 ft. 56 lb. (25.4 kg)
50 ft. 63 lb. (28.6 kg)
MILLER®
MLR/2784
Plasma Cutting Accessories
FLEXIBLE WORK CABLE
Work cable with quick connect and heavy-duty
clamp.
Part No. 234838, 20 ft. (6.1 m) length.
SUCTION/MAGNETIC
PIVOT BASE
Add this to your cutting guide for convenient attachment to all flat surfaces. The
extended arm accommodates holes up to 30”
in diameter.
Part No. 195979.
CABLE COVERS
PLASMA STANDOFF
ROLLER GUIDE
Helps maintain recommended standoff
distance to maximize cutting performance and
improve tip life.
Part No. 253054.
MVP™ PLUGS
For Spectrum 375 X-TREME, Millermatic 211 Auto-Set with
MVP, Maxstar 150 models, Diversion 180, and Multimatic 200.
Allows connection of machine to 115/120-volt or 230/240-volt
receptacles without tools—just choose the plug that fits the
receptacle.
Part No. 219258, For power cable 6-50P
(230/240 V, 50 A).
Part No. 219261, For power cable 5-15P (115/120 V, 15 A).
Part No. 219259, For power cable 5-20P (115/120 V, 20 A).
NO. 30B ECONOMY CART
with CORD WRAP
PLASMA CIRCLE-CUTTING
GUIDES
IN-LINE AIR FILTER KIT
RTI FILTER & BRACKET
For 875 and 875 Auto-Line. This economical
running gear provides mobility, includes a cord
wrap and extra storage space, and is angled
for easy front panel access.
Part No. 300511.
For 375 X-TREME, 625 X-TREME, 875, and
875 Auto-Line. Mounts to back of the plasma
cutter. Includes male and female 1/4” NPT
quick-disconnect fittings and
hose for easy on/off connection. The replaceable filter
element filters to .85 microns
for removal of 99.9% of water,
dirt and oil.
Part No. 228926.
Part No. 228928, Replaceable filter element.
MVP™ ADAPTERS
For Spectrum 625 X-TREME. Allows connection of machine
to 120 or 240-volt receptacles without tools—just choose the
adapter cord that fits the receptacle.
Part No. 254328, For connection to 6-50P receptacle (240 V,
50 A).
15 A).
20 A).
SPECTRUM PLASMA CUTTER HAND-HELD TORCHES
•Robust tip front end design optimizes arc performance and tip life •New retaining cup design provides increased cutting visibility
and quick turn for easy consumable change •Industry’s only true drag shield protects tip for long life and easy template cutting
•Trigger guard protects against inadvertent arc initiation •80° handle provides natural arm and elbow positioning while cutting
•No-slip grip for easy control and torch dexterity •Ergonomic design with unique thumb guide and finger grip contours
Part No. 249949, 12 ft. (3.7 m) XT30 for 375 X-TREME.
Part No. 255685, 20 ft. (6.1 m) XT30 for 375 X-TREME.
Part No. 260633, 12 ft. (3.7 m) XT40 with disconnect for 625 X-TREME.
Part No. 260635, 20 ft. (6.1 m) XT40 with disconnect for 625 X-TREME.
XT30/XT40
Part No. 249953, 20 ft. (6.1 m) XT60 for 875/875 Auto-Line.
Part No. 249954, 50 ft. (15.2 m) XT60 for 875/875 Auto-Line.
XT60
PLASMA TORCH CONSUMABLE KITS
Part No. 253520, For XT30.
For XT30C, XT30, XT40 and XT60. Cut
straight lines or circles up to 12” in diameter.
Part No. 253055.
For 875 and 875 Auto-Line. Dryer will remove
water, dirt and oil as small as one micron with
99.9% efficiency. Can be
mounted on plasma cutter
or on wall. Install as close
as possible to point of air
consumption.
Part No. 300491.
SPECTRUM PLASMA CUTTER
MACHINE TORCHES
For Spectrum 625 X-TREME
Part No. 259305, 25 ft. (7.6 m) long body XT40M.
Part No. 257462, 25 ft. (7.6 m) short body XT40M.
For Spectrum 875 and 875 Auto-Line
Part No. 257464, 25 ft. (7.6 m) short body XT60M.
XT30 CONSUMABLES
Part No. 249926, Electrode.
Part No. 249927, Tip.
Part No. 249930, Drag Shield.
Part No. 249931, Swirl Ring.
Part No. 249932, Retaining Cup.
Part No. 249933, Shield Deflector.
Part No. 249969, O-Ring.
XT40 CONSUMABLES
Part No. 249933, Shield Deflector.
Part No. 249934, Gouge Tip.
Part No. 249936, Gouge Shield.
Part No. 249937, Machine Shield.
Part No. 249969, O-Ring.
XT60 CONSUMABLES
Part No. 262643, 40A Tip.
Part No. 249929, 60A Tip.
Part No. 249935, Gouge Tip.
Part No. 256026, Electrode.
Part No. 256027, Drag Shield.
Part No. 256030, Deflector Shield.
Part No. 256031, Gouging Shield.
Part No. 263834, O-ring.
Part No. 265226, Shield.
MILLER®
MLR/2783
Gas Equipment - Outfits
HEAVY DUTY CUTTING, WELDING & HEATING OUTFITS
These premium heavy-duty Oxy-fuel outfits include just about everything needed for your cutting, welding, brazing or heating
project: •Heavy-duty Series 40 or medium-duty Series 30 highly accurate, brass regulators with corrosion-resistant gauges and
shatter-resistant poly carbonate lenses •Heavy-duty torches •Torch-mount flashback arrestors for added safety (acetylene outfits
only) •Long-lasting Graf-Tite® soft-seat cutting tips with in-tip gas mixing for added resistance to flashbacks •Lighter •Safety glasses
•Tip cleaner •Operations manual
Acetylene outfits include: 25 ft. (7.5 m) 1/4” (6 mm) twin hose and H743 torch-mount flashback arrestors
Propane/Propylene outfits include: 20 ft. (6.1 m) ¼” (6 mm) “T” grade hose and check valves
Typical applications: Heavy fabrication, construction, pipeline, maintenance/repair, rail and truck repair.
Part No.
HBA-40510
Fuel Gas
Acetylene
Torch
Handle
WH200A
Cutting
Cutting
Attachment
Tip
SC209
SC12-1
SC12-2
Acetylene
WH200A
SC209
SC12-1
up to 5/8" (16 mm) with tip incl.
SW205
up to 8" (203 mm) with optional tips
WH200A
SC209
SC40-1
WH200A
SC209
SC60-1
—
—
up to 8" (203 mm) with optional tip
HBA-40300
HBA-30510
HBA-30300
HBA-30510LP Propane or
Natural Gas
HBA-30510MP Propylene
Cutting Capacity
up to 1¼" (32 mm) with tips incl.
Welding
Tip
SW205
Welding Capacity
Heating
Tip
ST602
Oxygen
Regulator
40-175-540
CGA 540
up to 1/8" (3 mm) with
tip incl.
optional tips
tip incl.
optional tips
—
ST602
30-100-540
CGA 540
ST615
—
ST815
30-100-540
CGA 540
Fuel Gas
Regulator
40-15-510
CGA 510
40-15-300
CGA 300
30-15-510
CGA 510
30-15-300
CGA 300
30-50-510
CGA 510
HEAVY-DUTY CUTTING OUTFITS
Hand cutting torch outfits are built for the toughest jobs and include: •SC229 nickel-plated cutting torch with a reversible cutting lever and an
ease-on oxygen design for smooth starts and restarts. •Heavy-duty Series 40 or medium-duty Series 30 highly accurate, brass regulators
with corrosion-resistant gauges and shatter-resistant poly carbonate lenses •Long-lasting Graf-Tite® soft-seat cutting tips with in-tip gas
mixing for added resistance to flashbacks •Operations manual
HBS outfits include: Hard Hat™ gauge/regulator guards
HBAS outfits include: 20 ft. (6.1 m) 3/16” (5 mm) twin hose, H743 torch-mount flashback arrestors, lighter, safety glasses, and tip cleaner
Typical applications: Heavy fabrication, construction, shipyard, rail car, rail and truck repair.
Part No.
HBS-H510S
Fuel Gas
Acetylene
Cutting
Cutting
Attachment
Tip
SC229
SC12-2
Acetylene
SC229
HBS-H300S
HBAS-30510
HBAS-30300
SC12-1
Cutting Capacity
Oxygen
Fuel Gas
Regulator
Regulator
up to 1-1/4" (32 mm) with tips incl.
40 series w/ 2.5" gauges 40-15-510S
up to 12" (305 mm) with optional tips 40-175-540S
CGA-510
CGA 540"
40-15-300S
CGA-300
30 series w/ 2" gauges
30-15-510
up to 12" (305 mm) with optional tips 30-100-540
CGA-510
CGA 540"
30-15-300
CGA-300
MEDIUM DUTY CUTTING, WELDING & HEATING OUTFITS
These premium medium-duty Oxy-fuel outfits include just about everything needed for your cutting, welding, brazing or heating project: •Medium-duty Series 30 highly accurate, brass regulators with corrosion-resistant gauges and shatter-resistant poly carbonate
lenses •Medium -duty torches •Torch-mount flashback arrestors for added safety (acetylene outfits only) •Long-lasting Graf-Tite®
soft-seat cutting tips with in-tip gas mixing for added resistance to flashbacks •Lighter •Safety glasses •Tip cleaner •Operations
manual
Acetylene outfits include: 25 ft. (7.5 m) ¼” (6 mm) twin hose and H743 torch-mount flashback arrestors
Propane/Propylene outfits include: 20 ft. (6.1 m) ¼” (6 mm) “T” grade hose and check valves
Typical applications: Fabrication, farm and ranch, pipe, truck and auto, refrigeration, maintenance/repair.
Part No.
MBA-30510
Fuel Gas
Acetylene
MBA-30300
MBA-30510LP Propane or
MBA-30510MP Natural Gas
Torch
Handle
WH100
Cutting
Cutting
Attachment
Tip
MC509
MC12-0
MC12-1
MC40-1
MC60-1
Cutting Capacity
up to 5/8" (16 mm) with tips incl.
up to 5/8"" (16 mm) with tip incl.
up to 4"" (102 mm) with optional
tips
Welding
Tip
MW205
-
Welding Capacity
Heating
Tip
MT603
tip incl.
up to 3/8" (9.8 mm) with
optional tips
MT805
Oxygen
Regulator
30 series w/ 2"
gauges
30-100-540
CGA 540
30 series w/ 2"
gauges
30-100-540
CGS 540
Fuel Gas
Regulator
30-15-510
CGA-510
30-15-300
CGA-300
30-50-510
CGA 510
MILLER®
MLR/2783
Gas Equipment - Outfits
Toughcut™ DUTY CUTTING, WELDING & HEATING OUTFITS
Versatile Toughcut outfits include many feature found on more expensive outfits: •Medium-duty Series 30 highly accurate, brass
regulators with corrosion-resistant gauges and shatter-resistant poly carbonate lenses •Medium -duty torches •20 ft. (6.1 m) 3/16”
(5 mm) twin hose •Check valves for added safety •Long-lasting Graf-Tite® soft-seat cutting tips with in-tip gas mixing for added
resistance to flashbacks •Lighter •Safety glasses •Operations manual
Typical applications: Fabrication, farm and ranch, pipe, hobby, auto, refrigeration, maintenance/repair.
Part No.
MB55A-510
Fuel Gas
Acetylene
Torch
Handle
CW5A
Cutting
Cutting
Attachment
Tip
CC509P
MC12-1
MB55A-300
Cutting Capacity
Welding
Tip
MW205
Welding Capacity
tip incl.
optional tips
Heating
Tip
MT603
Oxygen
Regulator
30 series w/ 2"
gauges
30-100-540
CGA 540
Fuel Gas
Regulator
30-15-510
CGA-510"
30-15-300
CGA-300
Versa-Torch™ PORTABLE OUTFIT
One of the most versatile systems on the market, the Versa-Torch outfit includes: •lightweight nickel-plated torch handle and cutting attachment •Rugged, high-density polyethylene carrier •12.5 ft. (3.8 m) 3/16” (5 mm) twin hose •regulator-mount safety check
valves •”R” 20-cu.-ft. oxygen and “MC” 10-cu.-ft. acetylene cylinders •AT60 tip tube •13716 heating head •Lighter •Safety glasses
•Operations manual
Typical applications: manufacturing, maintenance/repair, air conditioning, refrigeration, plumbing, metal fabrication, jewelry, metal
sculpture and many others.
Part No.
VT-4T
Fuel Gas
Acetylene
Torch
Handle
AW1A
Cutting
Cutting
Attachment
Tip
AC309
MC12-00
Cutting Capacity
Brazing
Tip
LT103
LT104
LT106
Oxygen
Regulator
1/2 - 3/4" (12-19 mm)
30 series
5/8 - 1" (16-25 mm)
w/ 2" gauges
3/4 - 1-1/2" (19-38 mm)" 30-100-540
CGA 540"
Brazing Capacity
Fuel Gas
Regulator
"30-15-200
CGA-200
COMBINATION TORCH & TIP PACKAGES
These premium combination kits are available with cutting, welding and heating tips or with multiple cutting tips. Torches may be used with alternate fuel gases
and tips designed for alternate fuel. Included: •Heavy-duty or medium-duty torch •H743 Torch-mount flashback arrestors for added safety (acetylene outfits only)
•Long-lasting Graf-Tite® soft-seat cutting tips with in-tip gas mixing for added resistance to flashbacks
Typical applications: Heavy fabrication, construction, pipeline, maintenance/repair, rail and truck repair.
16206
(Heavy-duty)
Acetylene
Torch
Handle
WH200A
16205
(Medium-duty)
Acetylene
WH100
MC209
MC12-1
MW203
16280
(Heavy-duty)
16281
(Medium-duty)
Acetylene
WH200A
SC209
Acetylene
WH100
MC509
SC12-0
SC12-1
MC12-0
MC12-1
16280LP
(Heavy-duty)
Propane
WH200A
SC209
SC40-0
SC40-1
16281LP
(Medium-duty)
Propane
WH100
MC509
MC40-0
MC40-1
Part No.
Fuel Gas
Cutting
Cutting
Attachment
Tip
SC209
SC12-1
Cutting Capacity
up to 8"" (203 mm) with optional
tips
Welding
Tip
SW203
Welding Capacity
Heating Tip
(Avg BTU/Hr.
ST602
(40,000)
up to 5/64" (1.9 mm)
with tip incl.
optional tips
up to 5/64" (1.9 mm)
MT603
with tip incl.
(40,000)
optional tips
-
-
-
-
-
-
16206
16281
MILLER®
MLR/2783
Gas Equipment - Torches
HEAVY-DUTY TORCH HANDLE
Heavy-duty handle allows high gas flow for large cutting tips
and heating tips. Heavy-duty handles have replaceable hose
connections. ”B”-size inlet connections are 9/16”-18. WH200A
torch handle is covered by Miller's lifetime warranty when used
with authentic Miller | Smith tips.
Compatible Cutting Attachments: SC209, SC205, SC509
Compatible Tips: Welding: SW200 Series; Heating: ST600
and ST800 Series
Length: 7.5” (191 mm)
Weight: 1.01 lb. (0.46 kg)
Handle Diameter: 1” (25.4 mm)
Valve Assembly Replacement: G729-5A (also for SW1A,
SW1B and WH200)
Part No. WH200A.
HEAVY-DUTY CUTTING
ATTACHMENTS
Cuts up to 8” (203 mm) thick steel. Solid silver-brazed construction. Features o-ring seating and easy-to-change slip-in
Graf-Tite® cutting tips with cost-saving soft seats. Use with any
industrial fuel gases — acetylene, propane, natural gas, propylene, hydrogen, and many others. Several models of standard
and special-purpose tips are available for use in SC200 Series
cutting attachments. SC200 series torch handles are covered
by Miller's lifetime warranty when used with authentic Miller |
Smith tips.
Compatible Handle: WH200A
Compatible Tips: SC Series
Length: 12.5” (318 mm)
Weight: 1.83 lb. (0.83 kg)
Part No. SC205, 75° Head angle.
MEDIUM-DUTY TORCH HANDLE
Easy handling, high-quality mid-size torch handle. Handles all
but the highest volume heating and heaviest welding needs.
Features rugged silver-brazed construction, forged brass butt
and precision machined brass head. Stainless steel ball-type
valves reduce uneven valve wear and provide easy flame
adjustment. ”B”-size inlet connections are 9/16”-18 right and
left hand. WH100 torch handle is covered by Miller's lifetime
warranty when used with authentic Miller | Smith tips.
Compatible Cutting Attachments: MC505 and MC509
Compatible Tips: Welding: MW400 Series; Heating: MT800
Series
Length: 7” (178 mm)
Weight: 0.86 lb. (0.39 kg)
Handle Diameter: 15/16” (24 mm)
Valve Assembly Replacement: LW17 (also for MW5 and
MW5A)
Part No. WH100.
MEDIUM-DUTY CUTTING
ATTACHMENTS
Popular medium-duty cutting attachment easily cuts up to 6”
(153 mm) steel. Solidly constructed to last a lifetime — silverbrazed joints, stainless steel tubes, brass forged butt and head.
This torch has the same quality features and construction as
the larger and heavier Miller | Smith cutting attachments. Use
with any industrial fuel gases — acetylene, propane, butane,
natural gas, propylene, hydrogen and many others. MC500
series torch handles are covered by Miller's lifetime warranty
when used with authentic Miller | Smith tips.
Compatible Handle: WH100 and MW5
Compatible Tips: MC Series*
Length: 11.25” (286 mm)
Weight: 1.1 lb. (0.5 kg)
Part No. MC505, 75° Head angle.
Part No. MC509, 90° Head angle.
Standard-Duty Airline™ TORCH
HANDLE
Specially designed to handle standard-duty welding, brazing,
cutting and fabricating. Light weight and compact size provide
easy handling, even in confined areas. Needle valves located
at front end for easy one-hand flame adjustment. ”A”-size
inlet connections are 3/8”-24 right and left hand. AW1A torch
handle is covered by Miller's lifetime warranty when used with
authentic Miller | Smith tips.
Compatible Cutting Attachments: AC309
Compatible Tips: Welding: AW200 Series; Heating: AT600
Series; Twin Flame Tips: AT600 and AT600X6
Length: 5.75” (146 mm)
Weight: 0.37 lb. (0.17 kg)
Handle Diameter: 11/16” (17 mm)
Valve Assembly Replacement: AW11A
Part No. AW1A.
STANDARD-DUTY Airline™ CUTTING
ATTACHMENTS
Small, lightweight cutting attachment with cutting capacity
up to 3” thick (76 mm) steel. This torch has the same quality
construction and features built into each Miller | Smith cutting
attachment. AC309 torch handle is covered by Miller's lifetime
warranty when used with authentic Miller | Smith tips.
Compatible Handle: AW1A
Compatible Tips: MC Series (except #MC12-5)
Length: 8.5” (216 mm)
Weight: 1 lb. (0.44 kg)
Part No. AC309, 90° Head angle.
MC509
SC205
*MC12 Series not compatible with #MC505.
Gas Axe™ HAND CUTTING TORCHES SC SERIES HAND CUTTING TORCHES
Gas Axe™ extra-heavy-duty torches are 100% tested and
inspected, and are ideal for scrap and demolition cutting.
Safety engineered; designed for severe applications. Excellent
for use with propane or natural gas. Works with all gases
including propane/propylene-based fuels, natural gas and
acetylene. Extra-high-capacity cuts up to 24” (610 mm) with
acetylene. Cuts up to 20” (508 mm) with propane.
Compatible Cutting Tips: Acetylene: SC12-00 thru SC12-6,
SC56-1 thru SC56-9; Propane and Propane-Based: SC40-0
thru SC40-4, SC46-2 thru SC46-6, SC50-00 thru SC50-9;
Propylene: SC60-0 thru SC60-6, SC36-1 thru SC36-6; SpecialPurpose Tips: SC2-2, SC2-4
Recommended High-Flow Regulators: Oxygen: 40-175-540
or 40-275-540 (Cylinder), 46-175 (Manifold); LP Gas: 40-50510 (Cylinder), 46-50 (Manifold)
Head Angle
Length
Part No.
in Degrees Inches (mm)
SC929
90
21 (533)
SC935
75
36 (914)
SC939
90
SC930
180
SC945
75
48 (1,219)
SC949
90
SC940
180
SC965
75
72 (1,829)
SC969
90
SC960
180
SC929
Cuts up to 12” (305 mm) thick steel. Features sintered metal inlet filters, o-ring seating and easy-to-change slip-in Graf-Tite®
cutting tips with cost-saving soft seats. Super-tough, thick-wall brass forged heads reduce warping and distortion. SC225S and
SC229S have even thicker-walled heads for more severe service and applications. Use with any industrial fuel gases — acetylene, propane, natural gas, propylene, hydrogen, and many others. Several models of standard and special purpose tips are
available for use in SC Series cutting torches. Cutting torches are covered by Miller's lifetime warranty when used with authentic
Miller | Smith tips.
Compatible Cutting Tips: Acetylene: SC12-00 thru SC12-6, SC56-1 thru SC56-5; Propane and Propane-Based: SC40-0 thru
SC40-4, SC46-2 thru SC46-6, SC50-00 thru SC50-6; Propylene: SC60-0 thru SC60-6, SC36-1 thru SC36-6; SC Series SpecialPurpose Tips
Length: 20.5” (521 mm) except SC220
21” (533 mm) for SC220
Part No. SC225S, 75° Head angle. Thick-walled.
Part No. SC229S, 90° Head angle. Thick-walled.
SC175
SC369
SC220
MILLER®
MLR/2783
Gas Equipment - Regulators
HEAVY-DUTY SINGLE-STAGE REGULATORS - Series 40™
Brass construction for dependable service in corrosive atmospheres.
Series 40 single-stage regulators comprise a complete line of versatile regulators for welding, cutting, heating and other
industrial applications. Heavy-duty construction and simplified design provide high gas flow and longer trouble-free
operation. Stainless steel diaphragm allows use with liquid gases.
Gauges (2.5”/64 mm)
Delivery
Inlet
Pressure
Connection
Inlet
Outlet
40-175-540
Oxygen 0–175 PSIG 4,000 PSIG 200 PSIG
CGA 540 0–12 Bar
276 Bar
14 Bar
40-275-540 0–275 PSIG
400 PSIG
0–19 Bar
28 Bar
40-15-300
Acetylene 0–15 PSIG 400 PSIG
30 PSIG
CGA 300 0–1 Bar
28 Bar
2 Bar
40-15-510
CGA 510
40-50-510 LP Gas (Propane, 0–50 PSIG 400 PSIG
60 PSIG
CGA 510 Propylene or
0–3 Bar
28 Bar
4 Bar
Natural Gas)
40-275-580 Nitrogen 0–275 PSIG 4,000 PSIG 400 PSIG
CGA 580 0–19 Bar
276 Bar
28 Bar
Part No.
Gas
Outlet
Max Inlet
Pressure
Connection
9/16”-18 RH 3,000 PSIG
”B”
207 Bar
9/16”-18 LH
”B”
400 PSIG
28 Bar
9/16”-18 LH
”B”
400 PSIG
28 Bar
5/8”-18 RH
Internal
3,000 PSIG
207 Bar
40-175-540
40-50-510
MEDIUM-DUTY SINGLE-STAGE REGULATORS - Series 30™
Rugged medium-duty industrial-grade regulators.
Series 30 single-stage regulators are extremely durable and contain our exclusive Sure Seat™ filtered seat technology
for extended seat and regulator life. Filtered seats prevent contamination from entering the seating area, reducing repair
costs and downtime. These highly accurate regulators are manufactured with a rugged forged body, corrosion-resistant
bright nickel-plated bonnet and a highly durable neoprene composite diaphragm.
Gauges (2”/51 mm)
Delivery
Inlet
Max Inlet
Outlet
Part No.
Gas
Pressure
Connection Connection
Pressure
Inlet
Outlet
30-100-540 Oxygen 0–100 PSIG 4000 PSIG 150 PSIG
CGA 540 9/16”-18 RH 3,000 PSIG
0–7 Bar
276 Bar
10 Bar
”B”
207 Bar
30-20-540 0–20 PSIG
30 PSIG
0–1 Bar
2 Bar
30-15-510 Acetylene 0–15 PSIG 400 PSIG
30 PSIG
CGA 510 9/16”-18 LH 400 PSIG
0–1 Bar
28 Bar
2 Bar
”B”
28 Bar
30-15-300 CGA 300
30-15-520 CGA 520
30-15-200
CGA 200
30-50-510 LP Gas (Propane, 0–50 PSIG 400 PSIG
60 PSIG
CGA 510 9/16”-18 LH 400 PSIG
Propylene or 0–3 Bar
28 Bar
4 Bar
”B”
28 Bar
Natural Gas)
30-15-510
30-50-510
Series 30™ SINGLE-STAGE REGULATOR TWIN PACKS
Part No.
Gas
Regulator
HTP2 Oxygen 30-100-540 LP or Acetylene 30-15-510 HTP5 Oxygen 30-100-540 Acetylene 30-15-300 Specs
Delivery Pressure: 0–100 PSIG
Inlet Connection: CGA 540
•Solid brass industrial construction
•Durable PTFE high-pressure seat
•Convenient and economical
•100% tested and inspected
TWO-STAGE REGULATORS - Series 30™
Series 30 two-stage regulators drop cylinder pressure to working pressure in two stages for consistent and accurate
outlet pressure and flow regardless of inlet pressure. Recommended where outlet pressure and flow must be maintained
without variation.
Gauges (2”/51 mm)
Delivery
Inlet
Max Inlet
Outlet
Part No.
Gas
Pressure
Connection Connection
Pressure
Inlet
Outlet
35-125-540 Oxygen 0–125 PSIG 4,000 PSIG 150 PSIG
CGA 540 9/16”-18 RH 3,000 PSIG
0–9 Bar
276 Bar
10 Bar
”B”
207 Bar
35-15-510 Acetylene 0–15 PSIG 400 PSIG
30 PSIG
CGA 510 9/16”-18 LH 400 PSIG
0–1 Bar
28 Bar
2 Bar
”B”
28 Bar
Inert 0–50 PSIG 4,000 PSIG 60 PSIG
CGA 580 5/8”-18 RH 3,000 PSIG
35-50-580 0–3 Bar
276 Bar
4 Bar
Internal
207 Bar
35-125-540
SINGLE-STAGE STATION REGULATORS - Series 46™ (HEAVYDUTY) & Series 36™ (MEDIUM-DUTY)
Series 46 and Series 36 brass line regulators are rugged, accurate and corrosion-resistant with shatterresistant polycarbonate gauge lenses. The Series 46 regulators feature a stainless steel diaphragm and 2.5”
(64 mm) gauges while the Series 36 has a neoprene composite diaphragm and 2” (51 mm) gauges.
Delivery Gauges Diameter
Inlet
UL Listed Max Inlet
Outlet
Part No.
Gas
Inches (mm)
Pressure
Connection
Pressure
Connection
46-175 Oxygen 0–175 PSIG
2.5 (64) CGA024 9/16”-18 RH ”B”
200 PSIG / 14 Bar
36-150
0–12 Bar
2 (51) 500 PSIG / 35 Bar
46-15 Acetylene
0–15 PSIG
2.5 (64)
CGA025 9/16”-18 LH ”B”
100 PSIG / 7 Bar
36-15
0–1 Bar
2 (51) 200 PSIG / 14 Bar
46-50 LP Gas 0–50 PSIG
2.5 (64)
CGA025 9/16”-18 LH ”B”
100 PSIG / 7 Bar
36-50
0–3 Bar
2 (51) 500 PSIG / 35 Bar
46-15
MILLER®
MLR/2783
THREE-STAGE NITROGEN LOW-PRESSURE
BLANKETING REGULATORS
This preset regulator is specially designed to deliver a highly accurate and consistent lowpressure supply of nitrogen to oil-filled power transformers. Available with or without electronic
pressure switch. The regulator will deliver and maintain 0.50 PSIG in the head space of oil-filled
transformers. A built-in self-relieving valve set at 8 PSIG protects the system from over-pressurization due to temperature variation. Both models come with rapid-fill bypass pressure valve
allowing rapid filling of the transformer with 6 PSIG of pressure.
Part No. 16391, Without pressure switch.
Part No. 16347-3, With pressure switch.
Preset Outlet Pressure
1st Stage: 150 PSIG into 2nd stage
2nd Stage: 8 PSIG into 3rd stage
3rd Stage (delivery pressure): 0.4–0.6 PSIG into outlet
Bypass Rapid Fill/Purge: 6 PSIG
Inlet Connection: CGA580
Outlet Connection: 1/2” FNPT
Max Inlet Pressure: 3,000 PSIG
16347-3
16391
HVAC/REFRIGERATION PURGE/LEAK TEST REGULATOR
Our single-stage nitrogen regulator is specially designed to meet the specifications of HVAC refrigerant purging applications. This regulator is used with nitrogen to test HVAC systems to locate leaks and to purge an area for installation and
repair. Its compact size is suitable for use where space is limited.
•Economical and accurate
•Solid brass body provides durability
•Large durable nylon knob for easy pressure adjustment
•Highly accurate 2-inch (51 mm) gauges with shatter-resistant lenses
Part No.
Gas
30-450-580 Nitrogen Gauges (2”/51 mm)
Max Inlet
Outlet
Inlet
Delivery
Pressure
Connection
Connection
Pressure
Inlet
Outlet
0–450 PSIG 4,000 PSIG 600 PSIG
CGA 580 7/16”-20 External 3,000 PSIG
0–31 Bar
276 Bar
41 Bar
Flair Fitting
207 Bar
PREMIUM FLOWMETER REGULATORS - Series 30™
Rugged medium-duty industrial-grade regulators provide efficient and accurate regulation, and include our exclusive selfcentering flowball. They are constructed with our exclusive Sure Seat™ filtered seat technology for extended seat and
regulator life. Filtered seats prevent contamination from entering the seating area, reducing repair costs and downtime.
Filtered seats also reduce CO2 freeze-up. Provides high argon flow capacity up to 80 SCFH.
Flowmeter
Inlet
Flow Range Preset Delivery
Gas
No.
Pressure
Connection
32-80-580 H1105 Argon, CO2 10-80 SCFH
80 PSIG
CGA 580 5–38 LPM
6 Bar
32-80-320 CO2 CGA 320
32-30-580
H1240 Argon, CO2 10-60 SCFH
30 PSIG
CGA 580 32-30-580-6*
5–28 LPM
2 Bar
Helium 20-190 SCFH
10–90 LPM
General/
0-10 Range
Any Gas
Scale
10-80 SCFH
30 PSIG
CGA 320 35-30-320 H1240 CO2 5–38 LPM
2 Bar
Part No.
*Includes 6 ft. x 1/4” inert gas hose.
Outlet
Connection
5/8”-18 RH
Internal
Max Inlet
Pressure
3,000 PSIG
207 Bar
5/8”-18 RH
Internal
3,000 PSIG
207 Bar
35-30-320
32-80-580
5/8”-18 RH
Internal
3,000 PSIG
207 Bar
ECONOMY FLOWMETER REGULATORS (SINGLE-STAGE)
Exceptional value and compact design. Provides precise shielding gas regulation for MIG and TIG welding applications
and more. Shatter-resistant polycarbonate flow tube is repositionable for easy reading and features triple-scale for argon,
helium and argon/CO2. It has a packless o-ring flow tube seal which reduces maintenance and a built-in rupture disc
reduces possibility of flow tube damage due to high-pressure inlet surge. Precision flow-adjustment valve allows easy
adjustment to desired setting.
Part No. H2051B-580
Part No. H2051B-580H, Includes 6-ft. (1.8 m) hose with inert hose fittings.
Pressure
CO2 0-50 SCFH
50 PSIG
0–24 LPM
3 Bar
Helium
0-160 SCFH
0–78 LPM
Argon,
0-60 SCFH
Argon/CO2 Mix 0–28 LPM
Gas
Inlet
Connection
CGA 580
G5/8”A-14 RH
British fitting on
H2051A-B9
Outlet
Connection
5/8”-18 RH
Internal
Max Inlet
Pressure
3,000 PSIG
207 Bar
MILLER®
MLR/2783
DUAL FLOWMETER REGULATOR (SINGLE-STAGE)
Dual flowmeter regulator has a back-pressure compensated flow tube with shatter-resistant polycarbonate cover. It is
repositionable for easy reading and features triple scale for argon, helium and argon/CO2. Features include sensitive
needle valve for fine adjustment and a 2” (51 mm) gauge.
Part No. 33A-50-580.
Inlet
Pressure
Connection
CO2 0-50 SCFH
50 PSIG
CGA 580
0–24 LPM
3 Bar
Helium 0-160 SCFH
0–78 LPM
Argon,
0-60 SCFH
Argon/CO2 Mix 0–28 LPM
Outlet
Connection
5/8”-18 RH
Internal
Gas
Max Inlet Flowmeter
Pressure
3,000 PSIG H2230A
207 Bar
Note: When using argon/CO2 mix, read argon scale.
FLOWMETERS
Premium flowmeter models are designed to operate at inlet pressures of 80 PSIG (model H1105) and 30 PSIG (SelecO-Gas model H1240). They can be attached to regulators or pipeline installations. Features include an extra-long flow
tube made of shatter-resistant polycarbonate resin that is accurate to within five percent of the full scale reading. Flow
tubes have a unique ball guide which centers the ball in the tube and keeps it centered (competitors use a ball floating
in a non-centering tube which allows the ball to float off-center resulting in greater flows than the reading indicates). Our
exclusive Selec-O-Gas™ flow tube has separate scales for argon, CO2, helium and general non-corrosive gas. Just
rotate the outer tube to the scale you desire.
Part No.
Inlet
Connection
Outlet
Connection
Recommended
Inlet Pressure
0-80 SCFH
0–38 LPM
1/4” NPT Male
5/8”-18 RH
Internal
80 PSIG
6 Bar
Argon, CO2,
Helium, General
10-80 SCFH
5–38 LPM
1/4” NPT Male
5/8”-18 RH
Internal
30 PSIG
2 Bar
CO2
0-50 SCFH
0–24 LPM
1/4” NPT Male on
H2230
5/8”-18 RH
Internal
50 PSIG
3 Bar
Helium
0-160 SCFH
0–78 LPM
5/8”-18 RH
External on H2231
Argon, Argon/
CO2 Mix
0-60 SCFH
0–28 LPM
Description
Gas
Flow Range
H1105*
Heavy-Duty
Argon, CO2
H1240
Heavy-Duty
(Select-O-Gas)
H2230A
H2231A
Standard-Duty
(Multi-Scale)
H1105
*H1105 supersedes H1103; H1240 supersedes H1230E.
Note: When using argon/CO2 mix, read argon scale.
SINGLE-STAGE FLOW GAUGE REGULATORS - Series 30™
Single-stage flow gauge regulators are compact and feature a forged brass body with 2” diameter gauges
and a self-reseating pressure relief valve. They also include a Sure Seat™ protective inlet filter and a
durable neoprene-composite diaphragm.
Gauges (2”/51 mm)
Inlet
Connection
Inlet
Outlet
31-50-580 Argon 10-50 SCFH 0-4000 PSIG 10-50 SCFH CGA 580
31-50-580-6*
CGA 320
31-50-320
CO2 Part No.
Gas
Flow Range
Outlet
Connection
5/8”-18 RH
Internal
PREMIUM-QUALITY GAUGES
Pressure gauges (PSI/Bar) and flow gauges (CFH/LPM) have dual scale readings and are manufactured
in accordance with our rigid quality standards. All gauges feature precision watch-type movements for
optimum accuracy and 1/4-turn lens rings. They also feature one-piece shatter-resistant polycarbonate
lenses with protective lips to prevent damage to the high-visibility cupped faces.
Brass Case Gauges (2.5”/64 mm)
Part No. GA037-07, 400 PSI/28 Bar
Black Case Gauges (2”/51 mm)
GA037-07
GA138-03
Max Inlet
Pressure
3000 PSIG
207 Bar
MILLER®
MLR/2783
Gas Equipment - Tips
HEAVY-DUTY CUTTING TIPS - SC12 SERIES Acetylene
Preheat cutting tips for general hand and machine cutting. This series provides excellent
preheat characteristics required for machine cutting.
Compatible cutting attachments and torches:
•SC200 attachments
•All SC Series hand torches and machine torches
Part No.
SC12-00
SC12-0
SC12-0
SC12-1
SC12-1
SC12-2
SC12-2
SC12-2
SC12-3
SC12-3
SC12-4
SC12-4
SC12-4
SC12-5
SC12-5
SC12-5
SC12-6
SC12-6
Metal
Thickness
Inches (mm)
3/16 (5)
1/4 (6)
3/8 (10)
1/2 (13)
5/8 (16)
3/4 (19)
1 (25)
1¼ (32)
1½ (38)
2 (51)
2½ (64)
3 (76)
4 (102)
5 (127)
6 (152)
8 (203)
10 (254)
12 (305)
Consumption (SCFH)
Acetylene Drill Size
Oxygen
Preheat Cutting Jet
Cutting Preheat
24
40
50
75
85
105
115
135
170
180
240
265
315
420
485
550
750
975
7
7.5
7.5
11
11
12
12
12
14
14
15
15
16
30
30
30
32
32
6.5
7
7
9.5
9.5
10.5
10.5
10.5
12
12
13
13
14
26
26
26
28
28
68
62
62
56
56
54
54
54
51
51
45
45
45
41
41
41
32
32
SC56-1
SC56-1
SC56-2
SC56-2
SC56-2
SC56-3
SC56-3
SC56-5
SC56-5
SC56-5
SC56-7
SC56-9
SC56-9
Two-piece medium preheat cutting tips for general hand and machine cutting with propane,
propane-based fuel gases and natural gas.
•All SC Series cutting attachments, hand torches and machine torches
Part No.
SC40-0
SC40-0
SC40-1
SC40-1
SC40-2
SC40-2
SC40-2
SC40-3
SC40-3
SC40-4
SC40-4
SC40-4
1/4 (6)
3/8 (10)
1/2 (13)
5/8 (16)
3/4 (19)
1 (25)
1¼ (32)
1½ (38)
2 (51)
2½ (64)
3 (76)
4 (102)
Consumption (SCFH)
Fuel
Oxygen
Preheat
Cutting Preheat
40
50
75
85
105
115
135
170
180
240
265
315
38
38
38
38
38
38
38
38
38
65
65
65
8
8
8
8
8
8
8
8
8
15
15
15
HEAVY-DUTY CUTTING TIPS - SC50
SERIES HEAVY PREHEAT Propane or
Natural Gas
(TWO-PIECE)
Heavy preheat two-piece cutting tip series for hand and
machine cutting up to 20-inch thick steel.
•SC200 Series attachments
•All SC Series hand torches
•Two-hose machine torches
•Three-hose machine torch
Metal
Thickness
Inches (mm)
3/16 (5)
1/4 (6)
3/8 (10)
1/2 (13)
5/8 (16)
3/4 (19)
1 (25)
1¼ (32)
1½ (38)
2 (51)
2½ (64)
3 (76)
4 (102)
5 (127)
6 (152)
8 (203)
10 (254)
12 (305)
14 (354)
16 (406)
18 (457)
20 (508)
Consumption (SCFH)
Oxygen
Preheat Cutting Jet
Cutting Preheat
1/2 (13)
5/8 (16)
3/4 (19)
1 (25)
1¼ (32)
1½ (38)
2 (51)
2 – 5 (127)
6 (152)
8 (203)
8 – 14 (356)
14 – 20 (508)
24 (610)
75
85
105
115
135
170
180
420
485
550
1,250
2,150
2,600
33
33
33
33
33
43
50
57
66
72
110
145
175
30
30
30
30
30
39
45
52
60
65
100
130
160
56
56
54
54
54
51
51
41
41
41
28
3
3
One-piece cutting tips designed for cutting dirty or heavily coated metals. For rugged duty
including scrapping, heavy construction, or where excessive reflected heat is present.
Metal
Thickness
Inches (mm)
SC36-1
SC36-1
SC36-2
SC36-2
SC36-2
SC36-3
SC36-3
SC36-4
SC36-4
SC36-4
SC36-6
SC36-6
62
62
56
56
54
54
54
51
51
45
45
45
SC50-00
SC50-0
SC50-0
SC50-1
SC50-1
SC50-2
SC50-2
SC50-2
SC50-3
SC50-3
SC50-4
SC50-4
SC50-4
SC50-5
SC50-5
SC50-5
SC50-6
SC50-6
SC50-7
SC50-8
SC50-8
SC50-9
Metal
Thickness
Inches (mm)
HEAVY-DUTY CUTTING TIPS - SC36 SERIES Propylene
RUGGED DUTY
Part No.
Drill Size
Cutting Jet
Part No.
Heavy preheat cutting tips designed for cutting coated metals, heavy piercing, fast preheating
and cutting thick steel sections up to 24”.
•All SC hand torches
•Two-hose machine torches (maximum size SC56-7)
Part No.
HEAVY-DUTY CUTTING TIPS - SC40 SERIES Propane or
Natural Gas
(TWO-PIECE)
Metal
Thickness
Inches (mm)
HEAVY-DUTY CUTTING TIPS - SC56 SERIES Acetylene
HEAVY PREHEAT
Consumption (SCFH)
Propylene Drill Size
Oxygen
Preheat Cutting Jet
Cutting Preheat
1/2 (13)
5/8 (16)
3/4 (19)
1 (25)
1¼ (32)
1½ (38)
2 (51)
2½ (64)
3 (76)
4 (102)
10 (254)
12 (305)
Oxygen/Propane
Consumption (SCFH)
Propane
Oxygen
Preheat
Cutting Preheat
24
40
50
75
85
105
115
135
170
180
240
265
315
420
485
550
750
975
1,250
1,500
1,800
2,150
47
47
47
70
70
70
70
75
75
75
75
75
80
80
80
90
230
280
330
375
400
420
13
13
13
15
15
15
15
16
16
16
16
16
17
17
17
20
50
60
62
80
85
90
75
85
105
115
135
170
180
240
265
315
750
975
70
70
70
70
70
70
70
70
70
70
105
105
15
15
15
15
15
15
15
15
15
15
22
22
56
56
54
54
54
51
51
45
45
45
32
32
Oxygen/Natural Gas
Consumption (SCFH)
Drill Size
Natural Gas Cutting Jet
Oxygen
Preheat
Cutting Preheat
24
40
50
75
85
105
115
135
170
180
240
265
315
420
485
550
750
975
1,250
1,500
1,800
2,150
58
62
62
70
70
70
70
70
70
70
75
75
75
82
82
82
120
165
200
220
250
250
36
38
38
40
40
40
40
40
40
40
45
45
45
50
50
50
75
100
120
135
150
150
68
62
62
56
56
54
54
54
51
51
45
45
45
41
41
41
32
32
28
17
17
3
MILLER®
MLR/2783
HEAVY-DUTY CUTTING TIPS
Propane or
- SC46 SERIES RUGGED DUTY Natural Gas
One-piece cutting tips designed for cutting dirty or heavily
coated metals. For rugged duty including scrapping, heavy
construction, or where excessive reflected heat is present.
Part No.
SC46-2
SC46-2
SC46-2
SC46-4
SC46-4
SC46-4
SC46-5
SC46-5
SC46-5
SC46-6
SC46-6
Metal
Thickness
Inches (mm)
3/4 (19)
1 (25)
1¼ (32)
2½ (64)
3 (76)
4 (102)
5 (127)
6 (152)
8 (203)
10 (254)
12 (305)
HEAVY-DUTY CUTTING TIPS - SC60 SERIES Propylene
MEDIUM PREHEAT (TWO-PIECE)
Two-piece medium preheat cutting tips designed to provide optimum performance with propylene or propylene-based fuel gases.
•All SC Series hand torches
•Two-hose machine torches
ACETYLENE HEAVY-DUTY Acetylene
SPECIAL-PURPOSE TIPS
Oxygen/Propane
Consumption (SCFH)
Oxygen
Propane
Preheat
Cutting Preheat
105
70
15
115
70
15
135
70
15
240
70
15
265
70
15
315
70
15
420
105
22
485
105
22
550
105
22
750
105
22
975
105
22
Part No.
SC60-0
SC60-1
SC60-1
SC60-2
SC60-2
SC60-2
SC60-3
SC60-3
SC60-4
SC60-4
SC60-4
SC60-5
SC60-5
SC60-5
SC60-6
SC60-6
Metal
Thickness
Inches (mm)
3/8 (10)
1/2 (13)
5/8 (16)
3/4 (19)
1 (25)
1¼ (32)
1½ (38)
2 (51)
2½ (64)
3 (76)
4 (102)
5 (127)
6 (153)
8 (203)
10 (254)
12 (305)
Oxygen/Natural Gas
Consumption (SCFH)
Drill Size
Oxygen
Natural Gas Cutting Jet
Preheat
Cutting Preheat
105
70
41
56
115
70
41
56
135
70
41
56
240
70
41
56
265
70
41
56
315
70
41
56
420
52
52
54
485
52
52
54
550
52
52
54
750
52
52
54
975
52
52
54
Consumption (SCFH)
Oxygen
Preheat Cutting Jet
Cutting Preheat
35
75
85
105
115
135
170
180
240
265
315
420
485
550
750
975
35
38
38
38
38
38
38
38
58
58
58
58
58
58
58
58
Consumption (SCFH)
Capacity
Inches (mm) Oxygen Acetylene
Extra Long Cutting - SC12-4X9
SC12-4X9 Cutting 4 (102) 331 14
Tip for hard-to-reach areas. Size 4.
SC13-3 Gouging 3/8 (10) wide
151 35
Gouging - SC13-3 and SC13-5
1/4 (6) deep
For edge preparation, removal of welds or gouging cracked metals.
SC13-5 Gouging 1/2 (13) wide
246 50
Rivet/Riser Cutting - SC14-3
3/8 (10) deep
Cuts heads of bolts and rivets. It can also be used in 180° head cutting torch SC14-3 Riser 1½ (38) rivets 190 20
to cut out boiler tubes. Works equally well for cutting risers and bulk heads.
SC15-2 Washing 1/2 (13) wide
336 40
Rivet Blowing and Metal Washing — SC15-2
3/8 (10) deep
Quickly removes large quantities of metal. Heavy preheat primarily used as
SC17-0 Plate or Thin
3/8 (10) 55 4
a rivet blowing tip, but can be used for stud removal, metal washing, gouging, Cutting
veeing and groove cutting.
Consumption (SCFH)
Average
Plate Cutting — SC17-0
Part No.
Purpose
Oxygen Acetylene
BTU/Hour
”Drag”-style step tip cuts thin sheet metal with absolute minimum burn over
and plate warpage.
SC83 Heating 83,000 58 52*
Heating — SC83
*Two 350-cu.-ft. cylinders required.
Delivers large volume of heat quickly for bending, straightening, shrinking,
forming and other heating applications. It allows heating with a one-piece
cutting torch. Not recommended for use with cutting attachments.
Compatible cutting attachments and torches
SC83
Part No.
10
9
9
9
9
9
9
9
15
15
15
15
15
15
15
15
62
56
56
54
54
54
51
51
45
45
45
41
41
41
32
32
Purpose
SC12-4X9
SC13-3
SC14-3
SC15-2
SC17-0
PROPANE OR NATURAL GAS/PROPYLENE
HEAVY-DUTY SPECIAL-PURPOSE TIPS
General Gouging (Propane) - SC2-2 and SC2-4
For removing old welds or cracks, veeing and groove cutting.
Heavy-Duty Gouging - SC23-3 (Propane); SC23-3M (Propylene)
For removing old welds or cracks, veeing and groove cutting.
Heating (Propane) - SC112
Provides lots of heat fast with economical LP gas and oxygen. Not recommended for use with cutting attachments.
Propylene
Compatible cutting attachments and torches
Propane or
Natural Gas
Part No.
Purpose
SC2-2 Gouging SC2-4 Gouging SC23-3 Gouging SC23-3M Gouging Part No.
SC112 Purpose
Heating *Two 100-lb. cylinders required.
Consumption (SCFH)
Capacity
Fuel
Inches (mm) Oxygen
5/16 (8) wide
389 53
1/8 (3) deep
3/8 (10) wide
564 53
1/4 (6) deep
3/8 (10) wide
174 31
1/4 (6) deep
1/4 (6) wide
174 31
3/8 (10) deep
Average
BTU/Hour
289,000 Consumption (SCFH)
Oxygen Propane
495 125*
SC2-2
SC112
MILLER®
MLR/2783
MEDIUM & STANDARD-DUTY TIPS Acetylene
- MC12 SERIES
Slip-in cutting tips for general medium-duty hand cutting. Use with medium pressure acetylene
and oxygen.
•MC509 and AC309 (AC309: maximum size MC12-4)
Part No.
MC12-00
MC12-00
MC12-0
MC12-0
MC12-1
MC12-1
MC12-2
MC12-2
MC12-3
MC12-3
MC12-4
MC12-4
MC12-4
MC12-5
MC12-5
Metal
Thickness
Inches (mm)
Consumption (SCFH)
Oxygen
Preheat Cutting Jet
Cutting Preheat
1/8 (3)
3/16 (5)
1/4 (6)
3/8 (10)
1/2 (13)
5/8 (16)
3/4 (19)
1 (25)
1½ (38)
2 (51)
2½ (64)
3 (76)
4 (102)
5 (127)
6 (152)
30
30
40
46
75
81
107
118
170
181
249
267
320
420
485
7
7
7
7
9
9
11
11
12
12
14
14
15
15
15
6
6
6
6
7
7
9
9
10
10
12
12
13
13
13
68
68
62
62
55
55
54
54
51
51
45
45
45
41
41
MEDIUM & STANDARD-DUTY TIPS Propylene
- MC60 SERIES (TWO-PIECE)
Two-piece medium preheat cutting tips for hand cutting with propylene or propylene-based fuel
gases.
•MC505, MC509, and AC309
MEDIUM & STANDARD-DUTY TIPS Propane
- MC40 SERIES (TWO-PIECE)
Two-piece medium preheat cutting tips for hand cutting with propane and propane-based fuel
gases.
•MC505, MC509, and AC309
Part No.
MC40-00
MC40-0
MC40-0
MC40-1
MC40-1
MC40-2
MC40-2
MC40-2
MC40-3
MC40-3
MC40-4
MC40-4
MC40-4
Part No.
MC60-1
MC60-1
MC60-2
MC60-2
MC60-2
MC60-3
MC60-3
MC60-4
MC60-4
MC60-4
Metal
Thickness
Inches (mm)
Consumption (SCFH)
Oxygen
Propane Drill Size
Preheat Cutting Jet
Cutting Preheat
3/16 (5)
1/4 (6)
3/8 (10)
1/2 (13)
5/8 (16)
3/4 (19)
1 (25)
1¼ (32)
1½ (38)
2 (51)
2½ (64)
3 (76)
4 (102)
Metal
Thickness
Inches (mm)
24
40
46
75
81
107
118
133
170
181
249
267
320
35
35
35
35
35
35
35
35
35
35
35
35
35
7
7
7
7
7
7
7
7
7
7
7
7
7
68
62
62
55
55
54
54
54
51
51
51
51
51
Consumption (SCFH)
Oxygen
Preheat Cutting Jet
Cutting Preheat
1/2 (13)
5/8 (16)
3/4 (19)
1 (25)
1¼ (32)
1½ (38)
2 (51)
2½ (64)
3 (76)
4 (102)
75
81
107
118
133
170
181
249
267
320
26
26
26
26
26
42
42
42
42
42
7
7
7
7
7
11
11
11
11
11
55
55
54
54
54
51
51
45
45
45
HEAVY-DUTY WELDING TIPS Acetylene
- SW200 SERIES
MEDIUM-DUTY WELDING TIPS Acetylene
- MW200 SERIES
Consumption (SCFH)*
Drill Size
Oxygen
Acetylene
SW201
1/32 (0.7)
2.3
2.3
71
SW203
5/64 (1.9)
3.2
3.2
67
SW205
1/8 (3)
6
6
57
SW207
3/16 (5)
12
12
54
3/8 (10)
23
23
49
SW209
SW210
1/2 (13)
36
36
44
Part No. LW15, O-ring replacement (package of 25).
Consumption (SCFH)*
Drill Size
Oxygen
Acetylene
MW201
1/32 (0.7)
2.3
2.3
71
MW203
5/64 (1.9)
3.2
3.2
67
MW205
1/8 (3)
6
6
57
MW207
3/16 (5)
12
12
54
3/8 (10)
23
23
49
MW209
Part No. MW15, O-ring replacement (package of 25).
The SW200 Series is for general and heavy welding and brazing. Swaged construction provides
greater heat concentration for improved ”puddle” control. Tips are bent to 63.5° angle.
Compatible torch handles:
•WH200A
Fuel gases: These tips may also be used for brazing with acetylene-based fuels and propylenebased fuel gases. When using these gases, select a tip two sizes larger than recommended for
the same work as acetylene.
Part No.
Welding Capacity
Inches (mm)
*Consumption (SCFH: cubic feet per hour) figures represent the average volumes of
gases consumed when acetylene is added until sooty smoke just disappears from the
acetylene flame prior to opening the oxygen valve and adjusting to a neutral flame.
The MW200 Series is for general purpose medium-duty welding which features our ”soft flame”
for easier puddle control and better penetration. Tips are bent to 63.5° angle.
•WH100
Fuel gases: These tips may also be used for brazing with acetylene-based fuels and propylenebased fuel gases. When using these gases, select a tip two sizes larger than recommended for
the same work as acetylene.
Part No.
Welding Capacity
Inches (mm)
Propane or
General-purpose medium-duty brazing tips designed specifically for use with propane or Natural Gas
propane-based mixture fuel gases with oxygen. Used for brazing applications and casting
platinum.
•WH100.
MEDIUM-DUTY WELDING TIP - MW411 SERIES
Consumption (SCFH)
Oxygen
Fuel
MW411 1/2 - 5/8 (13 - 16) 51.9 13
Part No. MW15, O-ring replacement (package of 25).
Part No.
Welding Range
Inches (mm)
MILLER®
MLR/2783
STANDARD-DUTY WELDING TIPS - AW200 Airline™ SERIES Acetylene
General-purpose standard-duty welding/brazing tips. Shorter, lighter and easier to handle.
•AW1A
Fuel gases: These tips may also be used for brazing with acetylene-based fuels and propylene-based fuel gases.
When using these gases, select a tip two sizes larger than recommended for the same work as acetylene.
Consumption (SCFH)*
Drill Size
Oxygen
Acetylene
AW201
Up to 1/32 (0.7)
2.3
2.3
71
AW203
5/64 (1.9)
3.2
3.2
67
AW205
1/8 (3)
6
6
57
AW207
3/16 (5)
12
12
54
AW209
3/8 (10)
23
23
49
AW210
1/2 (13)
36
36
44
Part No. AW15, O-ring replacement (package of 25).
Part No.
Welding Capacity
Inches (mm)
HEAVY-DUTY HEATING TIPS - ST600 SERIES
Multi-flame heating tips for our heavy-duty torch handles. Used for heat treating, bending, straightening, pre-heating, brazing, shrinking, forming, etc. Heads are manufactured from solid copper.
•WH200A
Part No.
ST602
ST603
ST605
ST610
Average
BTU/Hour
40,125
71,750
124,670
194,890
Acetylene
Consumption (SCFH)
350 Cu. Ft. Fuel Overall Length
Drill Size
Cylinders Required Inches (mm)
Oxygen
Acetylene
31
28
64
1
16 (406)
55
50
56
1
16 (406)
96
87
57
2
19 (483)
150
136
54
3
19 (483)
Medium pressure oxy-propane or propane-based heating tips provide high heating
Propylene
performance with low-cost fuel gases including natural gas and propane-based gases.
Propane or
Natural Gas
•WH200A
Part No.
ST615
ST625
ST635*
Average
BTU/Hour
244,000
155,145
280,000
455,000
313,950
614,195
Consumption (SCFH)
Overall Length Torch Head
Inches (mm)
Number
Oxygen
Fuel Gas
225–535
70–160 (propane)
16 (406)
1495
175–450
96–267 (natural gas)
235–430
100–160
480–1000
140-280 (propane)
31.5 (800)
1504
390–785 200–450 (natural gas)
670–1580
185–480 (propane)
31.5 (800)
1499
*ST635 requires 3/8” (10 mm) I.D. hose and #40-50-510 propane cylinder regulator.
HEAVY-DUTY HEATING TIPS - ST800 SERIES
Medium pressure oxy-propane or propane-based heating tips provide high heating
performance with low-cost fuel gases including natural gas and propane-based gases.
•WH200A
Part No.
ST800
ST815
ST825
Average
BTU/Hour
58,000
75,000
273,000
830,000
Propylene
Propane
Consumption (SCFH) Overall Length Torch Head
Inches (mm)
Number
Oxygen
Fuel Gas
107–108
22–24
15.5 (394)
16317
118–138
31–34
390–655
120-235
16 (406)
4642
580–1,500
225–525
31 (787)
4639
MEDIUM-DUTY HEATING TIPS - MT600 SERIES
Versatile multi-flame heating tips for the popular medium-duty torch handles. Used for general
heating of metals, brazing, hard surfacing, etc. Heads are manufactured from solid copper.
•WH100
Part No.
MT603
MT605
MT610
Average
BTU/Hour
40,125
73,085
128,970
Consumption (SCFH)
Drill Size
Oxygen
Acetylene
31
28
64
1
10 (254)
57
51
56
1
16 (406)
100
90
57
2
18 (457)
STANDARD-DUTY HEATING TIPS - AT605 SERIES
Handy light-duty multi-flame tip for heating, brazing and applying hard facing metals. Uses
medium pressure acetylene and oxygen. Heads are manufactured from solid copper.
•AW1A
Part No.
AT605 Average
BTU/Hour
41,550 Acetylene
Acetylene
Consumption (SCFH)
Drill Size
Oxygen
Acetylene
32 29 64 1
10 (254)
MILLER®
MLR/2783
MEDIUM-DUTY HEATING TIPS - MT800 SERIES & MT615 Propylene
Medium pressure oxy-propane or propane-based heating tips provide high heating performance
with low-cost fuel gases including natural gas and propane-based gases.
•WH100
Part No.
MT800
MT805
MT615
Average
BTU/Hour
93,000
123,000
208,000
280,000
269,000
182,000
280,000
Consumption (SCFH)
Oxygen
Fuel Gas
119–121
36–38 (propane)
135–146
51–56
206–230
80-100 (propane)
242–270
120–135
225–535
70–160 (propane)
175–450
96–267 (natural gas)
235–430
100–160
Propane or
Natural Gas
Overall Length Torch Head
Inches (mm)
Number
12.5 (318)
16317
15 (381)
4642
15 (381)
1495
Gas Equipment - Accessories
GASAVER™
Ideal for production brazing and welding applications, our GASAVER can help you realize huge savings by eliminating wasted gas during
torch start-up/shut-down and between flame applications. Save time by eliminating repeated torch adjustment. GASAVER gives you a
safe place to temporarily put your torch and is used by America’s largest production plants. Torch flame is automatically extinguished
when torch is not in use. Simply pass torch over pilot flame to re-light.
Part No. WDW100, is standard GASAVER for use with propylene gas and oxygen. Equipped with adjustable pilot light.
Part No. WDW101, is GASAVER for general use with acetylene and oxygen. Can be installed in any convenient location on the line between regulators and torch. The closer the torch, the greater the savings in oxygen and acetylene. Equipped with adjustable pilot light.
Part No. WDW104, is standard GASAVER equipped with adjustable pilot light for use with propane or natural gas at 4 PSI or more.
WELDING HOSES
IMPORTANT: ”R”-Grade welding hose is for use with acetylene only, as specified by the RMA-CGA Hose Standard. ”T”-Grade
hose must be used with all other gases.
CAUTION: Do not exceed the maximum working pressures (regulator setting) listed for the hoses during welding and cutting
operations.
Oxygen: (150 PSIG max.)
Acetylene: (15 PSIG max.)
Propane, propylene and all other fuel gases: (40 PSIG max.)
Twin Hoses (Two-In-One)
Connections
Part No. Hose Type
Length
ID Diameter
To Regulators
To Torches
RL1131 ”R”-Grade 25 ft. (7.6 m) 1/4” (6 mm) R11 (Oxygen)
R11 (Oxygen)
R12 (Fuel)
R12 (Fuel)
9/16”-18 (”B”)
9/16”-18 (”B”)
RL921 12.5 ft. (3.8 m) 3/16” (5 mm) R13D (Oxygen) R13D (Oxygen)
R14D (Fuel)
R14D (Fuel)
RL1131
9/16”-18 (”B”)
9/16”-18 (”B”)
RL935 20 ft. (6.1 m) 3/16” (5 mm)
RA921 12.5 ft. (3.8 m) 3/16” (5 mm) R13D (Oxygen)
R13 (Oxygen)
R14D (Fuel)
R14 (Fuel)
9/16”-18 (”B”)
3/8”-24 (”A”)
TRL1131 ”T”-Grade 20 ft. (6.1 m) 1/4” (6 mm) R11 (Oxygen)
R11 (Oxygen)
RL121
R12 (Fuel)
R12 (Fuel)
9/16”-18 (”B”)
9/16”-18 (”B”)
Single Hoses
Part No. Hose Type
Length
ID Diameter
Connections
For Use With
RL121
”R”-Grade 12.5 ft. (3.8 m) 3/16” (5 mm) 9/16”-18 LH (”B”)
NE180
Handi-Heat torch
7294-1
Black Hose 6 ft. (1.8 m) 1/4” (6 mm) 5/8”-18 RH Male
Flow gauges
and flowmeter
regulators
OXY ACCESSORIES
Part No. NE135B, Two-Hose Manifold — oxygen ”B” connections
Part No. NE136B, Two-Hose Manifold — fuel ”B” connections
Part No. 16229, Circle Cutting Guide cuts from 5/8” to 12”
diameter holes. Works with all SC and MC style cutting tips.
NE135B
16229
FLASHBACK ARRESTORS
7294-1
•May be used with acetylene, propane, propylene, hydrogen
and natural gas •Built-in check valve prevents the reverse flow
of gas •Requires no manual reset •Easy to install — attaches
to standard ”B” fittings •High-quality brass construction, case
is rugged and corrosion-resistant •Sintered stainless steel filter
stops flashback fire
Part No. H753 Regulator Mount (for use with CGA ”B” male
fitting).
Part No. H743, Torch Mount (High Flow) (do NOT exceed 15
PSIG when using acetylene gas).
Hard Hat™ REGULATOR GUARDS
Protect regulators from costly gauge replacement with our
Hard Hat gauge guards. Promotes safety… designed to help
prevent broken gauges which can lead to gas leaks. Time and
cost savings… helps prevent costly equipment down time and
expensive repairs.
Part No. HB190, Made from rugged steel with a bright yellow,
baked-enamel finish. Quickly and easily attaches to regulator.
Fits Series 40™ brass regulators.
Part No. H195, Formed from extremely tough, impact-resistant
polycarbonate resin with a bright, safety-yellow finish. Fits
Series 30™ single stage regulators.
H195
HB190
REVERSE-FLOW CHECK VALVES
Reverse-flow check valves are an important part of any oxy-fuel
system. Without check valves, reverse flow of oxygen and fuel
gases can occur when a tip becomes clogged, or when one
cylinder empties during use. This could allow the higher pressure gas to back up into the other hose and into the regulator,
thereby creating conditions which could lead to a regulator
explosion. Our reverse-flow check valves close automatically
when outlet pressures drop below 1/2 PSIG, preventing reverse
flow of gases.
Part No. H698, Regulator Mount. Inlet Connection: 9/16”-18
LH and RH Internal; Outlet Connection: 9/16”-18 LH and RH
External.
Part No. H697, Torch Mount. Inlet Connection: 9/16”-18 LH
and RH External; Outlet Connection: 9/16”-18 LH and RH
Internal.
H698
H697
H753
MILLER®
MLR/2780
Fume Extraction
FILTAIR® 130
•Portable high-vacuum weld fume extractors designed for use with accessories like nozzles and fume guns to collect weld
fume particles at the source •Designed to capture weld fume •Unrivaled filtering performance. Designed to capture weld fume
particles with a cleanable filter and safely deposit them in an integrated particle bin. •Less noise. Up to 70% quieter than some
other extractors. Only 68.5 decibels at 5 ft. •Portable and compact. At only 46 pounds (21 kg) the vertical-shaped machine is
easy to move around.
Processes:
•Stick (SMAW) • Flux-Cored (FCAW) • MIG (GMAW) • TIG (GTAW)
Comes with:
FilTek™ XL filter, 8 ft. collection hose, and 20 ft. power cord
Part No. 300595, FILTAIR 130.
Part No. 300673, 34 ft. (10.4 m) Collection Hose.
Part No. 301267, Replacement Cleanable Filters.
Part No. 300669, 11.8” (300 mm) width Magnetic Nozzle.
Part No. 300672, 17 ft. (5.2 m) Collection Hose.
Part No. 300668, Flexible Funnel Magnetic Nozzle.
Model
Accu-Rated™ Airflow
Sound Level
Motor
Sound Level
Dimensions
Net Weight
FILTAIR 130 132 CFM (62 L/sec.) 68.5 dBA at 5 ft. (1.5 m) 1 HP 115 VAC, 1-phase, 60 Hz
23”H x 12”W x 12”D
at 11 A
(584 mm x 305 mm x 305 mm)
46 lb. (21 kg)
FILTAIR® MWX SERIES
•Powerful systems that easily move to the weld area. Disposable or cleanable filter models for multiple applications. •Designed
to capture weld fume. The MERV 15 rating of FilTek XL filters provides superior filtering of up to 95% of weld fume particulate.
•Class-leading suction power is Accu-Rated at the hood to better capture weld fumes and provide a cleaner environment •Superior filters. Our FilTek XL filters are specifically designed for welding with a MERV 15 rating to outlast, out-filter, and outperform all
the rest •Durable aluminum pre-assembled extraction arm with external adjustments for better airflow and longer life
Self-Cleaning Models Additional Features: •Unrivaled filtering performance. Designed to capture weld fume particles with a
cleanable filter and safely deposit them in an integrated particle bin. •One-minute cleaning cycle operates with a push of a button
on the control panel. Note: Compressed air required to operate cleaning mechanism. •Disposal drawer provides easy and convenient access to empty out collected particles. Handle releases drawer allowing it to slide out. •Upgrade to self-cleaning models
for high arc-on time, extracting from heavy fume processes, or when welding aluminum or galvanized materials
Processes:
Comes with:
FilTek™ XL filter and Pre-assembled arm
Part No. 300977, SA-807 7-ft. pre-assembled extraction arm.
Part No. 951510, MWX-S (Self-Cleaning Model) with 7-ft. standard arm.
Part No. 951507, MWX-D (Disposable Filter) with 7-ft. standard arm.
Filter Accu-Rated™ Extraction
Sound Level
Motor
Input Power
Dimensions
Net Weight without Arm
Media
Airflow
Arm Dia.
2
490 ft. 875 CFM
8”
Approximately 70 dBA 1 HP,
115 V, 1-phase, 60 Hz at 34.75”H x 31.75”W x 48”D
MWX-S: 300 lb. (136 kg)
(45.52 m2) (413 L/sec.) (203 mm) at 5 ft. (1.5 m)
3450 RPM approximately 11.9 A (883 mm x 806 mm x 1,219 mm) MWX-D: 238 lb. (108 kg)
REPLACEMENT FILTERS
FilTek XL filters efficiently capture the smallest weld fume particles and offer superior filter life.
Part No. 300540, Self-cleaning models.
Part No. 300539, Disposable filter models.
HOOD LIGHT with ARC SENSOR
Illuminates the welding zone and enables the fume extractor to
start automatically when welding begins.
Part No. 300689.
FILTAIR® Capture 5
•The capture zone redefined. Innovative, extended-capture fume extraction system designed specifically for welding. •ZoneFlow™ technology. Extends the capture area up to five feet versus 12–18” with conventional source capture arms. •Minimizes
downtime with fewer fume extractor adjustments. With increased capture area, arm interactions are dramatically minimized.
•Designed to capture weld fume. The MERV 15 rating of FilTek XL filters provides superior filtering of up to 95% of weld fume
particulate. •Source capture is designed to draw weld fume away from the welder’s breathing zone and keep the facility clean
Processes:
Comes with:
FilTek™ XL filter and Durable, easy-to-move, pre-assembled, aluminum extraction arm with toolless external adjustments for
higher airflows and longer filter life
Part No. 951574, 460 V FILTAIR® Capture 5 with 10-ft. Extraction Arm.
Part No. 301082, 10-ft. pre-assembled extraction arm.
Part No. 301083, 12-ft. pre-assembled extraction arm.
Part No. 301093, 460 V, 3-Phase Extractor Cart.
Part No. 301154, 575 V, 3-Phase Extractor Cart.
Part No. 301106, FilTek® XL Replacement Filter.
Filter
Media
452 ft.2 (42
m2)
Accu-Rated™
Airflow
900 CFM
(425 L/sec.)
Extraction Arm
Diameter
10” (254 mm)
Sound Level
Motor
Approximately 77 dBA 3 HP,
at 5 ft. (1.5 m)
3450 RPM
Input Power
Dimensions
230 VAC, 1-phase, 60 Hz at 13.5 A
460 VAC, 3-phase, 60 Hz at 3.7 A
575 VAC, 3-phase, 60 Hz at 3.0 A
43”H x 36”W x 48”D
(1,092 mm x 915 mm
x 1,219 mm)
Net Weight
620 lb. (282 kg)
with 12 ft. arm
MILLER®
MLR/2782
Welding Protection
•Digital controls easily allow welder to adjust shade, delay, and sensitivity.
•Premium headgear features unsurpassed fit and durability. Provides extensive adjustability settings and a pivoting top for better fit and comfort.
WELDING HELMET FEATURES
•External grind on Titanium 7300 and 9400 helmets allows welder to switch to grind mode with the
push of a button.
•InfoTrack™ technology on Titanium helmets allows the lens to track arc time while under the hood.
Includes a digital clock display with the ability to set an alarm or timer.
Classic
Classic
Classic
Digital
Titanium
Titanium
Digital
Digital
Series
Series
Series
Elite™
1600™
1600i™
Pro-Hobby Performance™
FS#10
Variable
VSi™
Flip-Up
Shade
Viewing Area
5.15 sq. in. 5.07 sq. in. 5.15 sq. in. 5.15 sq. in. 6.06 sq. in. 7.22 sq. in. 9.22 sq. in. 16 sq. in.
16 sq. in.
Shades
10
10
8–12
8–13
8–13
Cut: 5–8
Cut: 5–8
10
10
Weld: 8–13 Weld: 8–13
Modes
Weld
Weld
Weld
Weld/X-mode Weld/Grind Weld/Cut/ Weld/Cut/ N/A
N/A
Grind
Grind/X-mode
Integrated
No
Yes
No
Yes
No
No
No
No
Yes
Grind Shield
Auto-on
Yes
Yes
Yes
Yes
Yes
Yes
Yes
N/A
N/A
Sensors
2
2
2
3
2
3
4
N/A
N/A
TIG Rating
20 amps
20 amps
20 amps
5 amps/below 20 amps
5 amps
5 amps/below N/A
N/A
Switching Speed 1/3,600
1/3,600
1/10,000
1/20,000
1/20,000
1/20,000
1/20,000
N/A
N/A
Digital Controls No
No
No
No
Yes
Yes
Yes
No
No
Prem. Headgear No
No
No
No
Yes
Yes
Yes
No
No
InfoTrack™
No
No
No
No
No
No
No
No
No
16 oz. (454 g) 14 oz. (396 g) 16 oz. (454 g) 23 oz. (652 g) 16 oz. (454 g) 17 oz. (482 g) 18 oz. (510 g) 17 oz. (482 g) 22.5 oz. (638 g)
Weight
Features
Classic
Series
FS#10
Digital
Digital
Titanium
Titanium
7300™
9400™
7.22 sq. in. 9.22 sq. in.
Cut: 5–8
Cut: 5–8
Weld: 8–13 Weld: 8–13
Weld/Cut/ Weld/Cut/
X-mode/
X-mode/
External Grind External Grind
No
No
Digital
Titanium
9400i™
9.22 sq. in.
Cut: 5–8
Weld: 8–13
Weld/Cut/
X-mode
Yes
3
Yes
4
Yes
4
1/20,000
Yes
Yes
Yes
1/20,000
Yes
Yes
Yes
1/20,000
Yes
Yes
Yes
Yes
5 amps/below 5 amps/below 5 amps/below
19 oz. (539 g) 20 oz. (567 g) 24 oz. (680 g)
CLASSIC SERIES
Digital Pro-Hobby™ SERIES
Digital Performance™ SERIES
Digital Elite™ SERIES
Titanium Series™
MP-10™ SERIES
•Miller quality for the value-minded welder who wants an autodarkening lens.
•2-year warranty
•FS#10 Flip-Up and VSi models feature integrated grinding
shield plus VSi model adds X-mode
•Designed with construction market in mind
Part No. 263038, FS#10 Flip-Up.
Part No. 231703, FS#10.
Part No. 251292, Variable Shade.
Part No. 260938, VSi™.
•Ultimate helmets PLUS four modes of digital versatility for
most welding and cutting applications.
•Four arc sensors and four modes: weld, cut, grind and
X-mode.
•X-mode eliminates sunlight interference and low-amperage
lens opening from obstructed sensors.
Part No. 259485, Vintage Roadster™.
Part No. 257217, Inferno™.
Part No. 256173, Camouflage.
Part No. 257213, Black.
Part No. 269273, Blue Flame.
•Ideal helmets for light-duty welding applications.
Part No. 259486, Metalworks™.
Part No. 256168, Red Flame.
•Industrial helmets for the most extreme welding and grinding
applications
•Four operating modes: weld, cut, grind and X-mode (not available on 1600/1600i models).
•X-mode eliminates sunlight interference and low-amperage
lens opening from obstructed sensors (not available on
1600/1600i models).
•Silver shell reflects heat to keep helmet and user cool.
•Aluminum heat shield protects analog lens in high-amperage
applications.
Part No. 256177, Titanium 9400i™.
Part No. 256176, Titanium 9400™.
Part No. 255519, Titanium 1600i™.
•Mid-range helmets for most welding applications.
Part No. 256160, ’64 Custom™.
•Miller quality for the value-minded welder
•Passive shade 10 lens
•Upgradable to auto-darkening lens
Part No. 238496, Inferno™.
MILLER®
MLR/2782
Welding Protection
Titanium Series™ REPLACEMENT PARTS
Description
Helmet shell, Titanium (QR)
Inside lens cover (5¼” x 4½”) (5-pkg)
Inside lens cover (4¼” x 2”) (5-pkg)
Auto-darkening lens assembly
Filter plate
Gasket, Lens assembly (QR)
Front lens cover
(4-11/16” x 5-5/8”) (5-pkg)
Front lens holder, Titanium
Ratchet headgear assembly
Adjustment angle/stop hardware kit
Fabric headband
Replacement o-rings for kits
#770248 (5 per pkg)
Comfort cushion
Battery tray, kit (left/right)
Lens, Grinding Shield (Clear)
Clips, Retaining Grinding Shield
Button, Replacement External Grind
Clips, Visor Hinge (i-Series Shell)
Lens Tear-Off, Grind Shield (Clear)
Kit, Weld Shield Hinge
Titanium
1600
Titanium
1600i
Titanium 7300
Titanium 9400
Titanium 9400i
Analog
Digital
Analog
Digital
Analog
Digital
243530245820243530258601 243530 258601245820 245820
235628235628
-
-
-
-
-
-
-
770237770237
-
-
-
-
-
-
-
216327216327216327216327
-
-
245816256358245817256359245817256360
235630235630
-
-
-
-
-
245813245813 - 241977241977241977241977241977
216326216326216326216326 216326 216326216326 216326
243396245815243396243396 243396 243396245815 245815
-
-
-
256174
-
256174
-
256174
770248770248770248256178 770248 256178770248 256178
770249770249770249770249 770249 770249770249 770249
079975079975079975079975 079975 079975079975 079975
216336216336216336
-
216336
-
216336
-
-
216339216339216339216339216339216339
-
245818
-
-
-
-
245818245818
-
245819
-
-
-
-
245819245819
-
-
-
256179
-
256179
-
-
255070
-
-
-
-
255070255070
-
254278
-
-
-
-
254278
254278
-
269929
-
-
-
-
269929269929
Digital Elite™ SERIES
REPLACEMENT PARTS
Description
Helmet shell,Black
Helmet shell, Camouflage
Helmet shell, Inferno
Helmet shell, Blue Flame
Gasket, auto-darkening lens assy
Gasket, front lens
Front lens cover (4-11/16” x 5-5/8”)
(5-pkg)
Front lens holder, Black, flat
Frame, lens holding
Ratchet headgear assembly Adjustment angle/stop hardware kit
Fabric headband
Replacement o-rings for kits #770248 (5 per pkg)
Comfort cushion
Analog
Digital
216331216331
227190227190
223454223454
269274269274
216327216327
-256469
234758234758
241977241977
216337216337
216326216326
241978241978
216335234759
-256174
770248256178
770249770249
079975079975
216336
216339216339
Description
Helmet shell, Black
Inside lens cover (4¼” x 1¾”) (5-pkg)
Gasket, front lens
Front lens cover (4¼” x 2”) (5-pkg)
Front lens cover (4½” x 3¾”) (5-pkg)
Front lens cover (5¼” x 4½”) (5-pkg)
Frame, lens holding
Fabric headband
#770248 (5 per pkg)
Comfort cushion
Battery cover
Lens, Grinding Shield (Clear)
Clips, Retaining Grinding Shield
Clips, Visor Hinge (i-Series Shell)
Lens Tear-Off, Grind Shield (Clear)
FS#10
VS
Digital
232020232020
241461241461
241459241459
250533250533
770237770237
-256468
232028232028
231921231921
232030232030
232033232033
243395243395
-
256174
770248256178
770249770249
079975079975
216336
-256730
Description
Helmet shell, Black
Helmet shell, Red Flame
Helmet shell, Metalworks
Inside lens cover (4¼” x 1¾”) (5-pkg)
Gasket, front lens
Front lens cover (4½” x 3¼”) (5-pkg)
Front lens holder, Gray
Front lens holder, Red
Front lens holder, Camouflage
Ratchet headgear assembly
Fabric headband
#770248 (5 per pkg)
Comfort cushion
Battery cover
MP-10™ SERIES REPLACEMENT PARTS
VSi™
FS#10
Flip-Up
231415231415 261824231415
-
-
-
770237
231410231410 231410
231571251293 261826770226
-
-
261827
231412231412
-
-
-
-
770237
231411231411
-
-
-
235628
231572231572 261828
-
-
-
261829
770248770248 770248770248
770249770249 770249770249
079975079975 079975079975
216336216336 216336216336
-
231413266781
-
-
245818261830
-
-
245819
-
-
255070
-
-
254278
-
Analog
Helmet shell, Black
Helmet shell, Blue Rage
Helmet shell, '64 Custom
Gasket, front lens
Front lens cover (4½” x 5½”) (5-pkg)
Front lens holder, Blue
Front lens holder, Camouflage
Ratchet headgear assembly Adjustment angle/stop hardware kit
Fabric headband
#770248 (5 per pkg)
Comfort cushion
CLASSIC SERIES REPLACEMENT PARTS
Description
Digtal Pro-Hobby™ SERIES
REPLACEMENT PARTS
Digital Performance™ SERIES
REPLACEMENT PARTS
Description
Part No.
Helmet shell, Black Helmet shell, Inferno Inside lens cover (5¼” x 4½”) (5-pkg) Filter plate Gasket, front lens Front lens cover (4-11/16” x 5-5/8”) (5-pkg) Frame, lens holding Spacer, lens holding (MP-10) Adjustment angle/stop hardware kit Fabric headband Replacement o-rings for kits #770 248 (5 per pkg) Comfort cushion 216331
223454
235628
235630
216337
216326
216335
235629
770248
770249
079975
216336
Analog
Digital
231415231415
231419231419
231418231418
260087260087
231410231410
-256467
231412231412
231411231411
231572231572
231573231573
231574231574
231576231576
-
256174
770248256178
770249770249
079975079975
216336
-
231413
256729
-
MILLER®
MLR/2782
Welding Protection
Weld-Mask™ AUTO-DARKENING GOGGLES
•Uniquely designed auto-darkening welding goggles with face shield and head cover provide alternative protection for specialized
welding applications
•Ideal for maintenance, repair, and installation
•Compact design allows users to weld in spaces where access with traditional welding helmets is limited
•Lightweight design virtually eliminates neck strain
•Ideal alternative for cutting glasses for use with plasma cutters
•Eye covering fits tightly to the face to block out light for precision welding in bright surroundings
•Face shield and head cover provide coverage for UV/IR rays and applications with limited spatter
•Goggles feature shades 5, 7, 9, 11, and 13 (light state shade 3)
Part No. 267370.
Part No. 267422, Guard, face.
Part No. 267420, Cover, lens.
Part No. 270053, Band, head.
Part No. 267421, Cover, head front.
HELMET BIB
•Attaches to bottom of the helmet with hookand-loop fasteners for added neck coverage
Part No. 253882.
HEADGEAR
•Extensive adjustability settings and a pivoting
top for better fit and comfort
•Fits any helmet in the Arc Armor® line
Part No. 256174.
SLOTTED HARD HAT
ADAPTER
HARD HAT ADAPTER
•Compatible with Fibre Metal and MSA hats.
Other brands may fit depending on size and
shape.
Part No. 213110, XL and XLi.
Part No. 222003, All other Miller Series.
•Compatible with most slotted hard hats
Part No. 259637.
Helmet and hat not included.
HELMET HOOK
•Holds welding helmets, grinding shields or
other helmets with a headgear. Silicone strap
secures the helmet in place
Part No. 251018.
2x4 AUTO-DARKENING
LENS
•Fits all 2x4-inch windows
•Solar powered, two arc sensors
•Light state shade 3
•Two-year warranty
Part No. 770660, Shade 8.
JOBSITE TOOL BAG
•Over twenty separate pockets
•Opening of 12” x 18.5” (305 x 470 mm)
Part No. 228028.
Helmet and hat not included.
PROTECTION PAKS
Starter Pak
Includes #251 292 Classic VS helmet and
Classic Cloth jacket
Part No. 255848, Large.
Part No. 255850, X-Large.
Part No. 255851, 2X-Large.
Performance Pak
Includes #256 159 Performance helmet and
Indura® Cloth jacket
WELDING CAPS
•Caps are reversible with a low, soft bill
•Miller® logos design
Part No. 258322, Size 7.
Part No. 258323, Size 7⅛.
Part No. 258325, Size 7¼.
Part No. 258326, Size 7⅜.
Part No. 258327, Size 7½.
Part No. 258328, Size 7¾.
MILLER®
MLR/2782
Welding Protection
LEATHER JACKET
•Top grain leather •Expandable leather strategically placed
for optimal mobility •Flame-resistant inside cuff •Satin lined
•Tapered, athletic cut
Part No.
231088
231089
231090
231091
231092
231093
231094
231095
Size
247114
247115
247116
247117
247118
247119
247120
247121
Indura® CLOTH JACKET - MEN’S &
WOMEN’S
• Indura® flame-resistant cotton (flame resistance guaranteed
for life of jacket) •Nomex® flame-resistant thread
Size
CLASSIC CLOTH CAPE SLEEVES
•9-ounce flame-resistant navy cotton •Fold-in sleeve snaps
•Allows for bib attachment (sold separately)
Part No.
Size
Small
Medium
Large
X-Large
2X-Large
3X-Large
4X-Large
5X-Large
CLASSIC CLOTH APRON
•35” length with accessible front pocket
•Adjustable drawstring
ensures a good fit
Part No. 247149.
Size
Small
Medium
Large
X-Large
2X-Large
3X-Large
4X-Large
5X-Large
•9-ounce flame-resistant navy cotton •Pre-shrunk fabric •Foldin sleeve snaps •Finished hems and reinforced stitching
Part No.
Size
Part No.
Size
Small
Medium
Large
X-Large
2X-Large
3X-Large
4X-Large
5X-Large
WeldX™ CAPE SLEEVES
•7-ounce WeldX front and flame-resistant navy cotton back
•Fold-in sleeve snaps •Allows for bib attachment (sold
separately)
247122
247123
247124
247126
247127
247128
247130
247131
CLASSIC CLOTH LAB COAT
•40” length •9-ounce flameresistant navy cotton •Fold-in
sleeve snaps •Finished hems and
reinforced stitching
252000
252001
252002
•Indura® flame-resistant cotton (flame resistance guaranteed
for life of jacket) •Top grain leather •Allows for patented bib/
apron attachment
Part No.
Small
Medium
Large
X-Large
2X-Large
3X-Large
4X-Large
5X-Large
Part No.
COMBO JACKET
231080
231081
231082
231083
231084
231085
231086
231087
CLASSIC CLOTH JACKET
244749
244750
244751
244752
244754
244755
244756
244758
258095264379Small
258097264380Medium
258098264381Large
258099264382X-Large
2581002643832X-Large
3X-Large
258101—
258102—
4X-Large
258104—
5X-Large
247138
247139
247140
247142
247143
247144
247145
247146
•Lightweight exclusive material with extreme flame-resistant
properties •7-ounce WeldX front and flame-resistant navy cotton back •Vented back/extended rear tail •Zipper closure with
hook-and-loop fastened flap •Chromium free
Part No.
Small
Medium
Large
X-Large
2X-Large
3X-Large
4X-Large
5X-Large
Men's Women's
Part No. Part No.
WeldX™ JACKET
Size
Small
Medium
Large
X-Large
2X-Large
3X-Large
4X-Large
5X-Large
WeldX™ APRON
•35” length with accessible front pocket
•Adjustable drawstring ensures a good fit
Part No. 247134.
Size
Large
X-Large
2X-Large
BIB/APRON
WeldX™ BIB
CLASSIC CLOTH BIB
WeldX™ SLEEVES
CLASSIC CLOTH SLEEVES
COMBO SLEEVES
•Attaches to Indura® Cloth and Combo Jackets •19” length •Attaches to cape sleeves
with snaps across the chest as a bib or along
Part No. 247133.
the bottom as an apron
Part No. 231125.
•18” length •Fold-in sleeve snaps •Onehanded cinch closure
Part No. 247137.
•18” length •Fold-in sleeve snaps •Onehanded cinch closure
Part No. 247148.
•19” length •Attaches to cape sleeves
Part No. 247147.
•Indura® flame-resistant cotton/top grain
leather • 21” (533 mm) length
Part No. 231096.
MILLER®
MLR/2782
Welding Protection
PERFORMANCE WELDING GLOVES
Unprecedented comfort and performance, redefining the welding glove industry. Three-dimensional pattern, select-grade leather
and precision craftsmanship with unique design features for specific welding applications. Exceptional dexterity and flexibility.
Extra Heavy-Duty MIG/Stick
• An industry first! Silicone patches on back
for heat and spatter protection •Multi-layered
insulated palm and back •Dual-padded, pig
grain palm for added comfort
Heavy-Duty MIG/Stick (Long Cuff)
•Padded forearm for additional protection
and comfort •Triple-layered insulated back
•Strategically placed patches on pig grain palm
and cow split back for extended glove life
Heavy-Duty MIG/Stick
•Strategically placed patches on palm and
back for extended glove life •Double-layered
insulated palm and back •Pig grain leather
palm provides extreme durability and protection
MIG/Stick
•Dual-padded palm for added comfort •Wool
back provides ultimate insulation •Cow
split leather provides extreme durability and
protection
MIG (Lined)
•Dual-padded palm •Fleece insulated palm,
foam insulated back •Cow grain palm, pig
split back and goat grain inner fingers provide
exceptional dexterity and comfort
Part No. 263330, X-Small (Women’s).
Part No. 263331, Small (Women’s).
Part No. 263332, Medium.
MIG (Unlined)
•Unlined palm for heightened feel and dexterity
•Double-layer insulated back and dual-padded
palm for added comfort •Cow grain palm, cow
split back and goat grain inner fingers provide
exceptional dexterity and comfort
TIG
•Completely unlined for heightened feel and
dexterity •Triple-padded palm for added
comfort •Goat grain leather offers superior
flexibility and dexterity
Part No. 263345, X-Small (Women’s).
Part No. 263346, Small (Women’s).
TIG/Multitask
•Dual-padded palm for added comfort •Wool
back provides ultimate insulation •Goat grain
leather offers superior flexibility and dexterity
Part No. 263352, Small.
Metalworker
•Durable top grain leather and spandex
back for enhanced durability and dexterity
•Neoprene wrist with hook-and-loop closure
increases fit and support •Padded, reinforced
palm and thumb saddle for extended wear
Work
•Dual-padded palm for added durability
•Fleece back provides ultimate insulation
•Cow grain leather offers superior durability
and abrasion resistance
CLASSIC WELDING GLOVES
Standard fit and materials for the value-minded welder.
Heavy-Duty MIG/Stick
•Durable side-split cowhide •Aluminized
insulation reflects radiant heat •Reinforced
palm heightens support and durability
MIG (Long Cuff)
•Extra long 9” cuff for increased forearm protection •Durable side-split cowhide •Moisturewicking cotton fleece lining
MIG
•Durable side-split cowhide •Moisture-wicking
cotton fleece lining •Thumb reinforcement
straps increase support and durability
TIG
•Unlined pigskin palm offers superior dexterity
and wear •Durable side-split cowhide •Reinforced palm heightens support and durability
MILLER®
MLR/2781
Workstations
S-Series ArcStation™
•The S-Series is perfect for the welder who needs a tough workbench for the fab shop or the home garage. •Four S-Series models available, depending on your needs: 30S (30 x 30 inch with solid tabletop), 30SX (30 x 30 inch with X-pattern tabletop), 60S (30 x 60 inch
with solid tabletop), or 60SX (30 x 60 inch with X-pattern and solid tabletop combo) •SX model includes X-pattern tabletop for troublefree clamping! •Durable 1/8” steel frame with cross bar and heavy-duty tabletops provide a sturdy area for welding or metalworking
•Lower shelf provides a convenient place to store equipment, tools and raw materials •Adjustable leveling feet keep bench rock-steady
•Customize with a wide range of handy accessories to make this the ultimate workbench
Part No. 951167, 30S.
Part No. 951168, 30SX.
Part No. 951169, 60S.
Part No. 951170, 60SX.
Part No. 951413, 60SX Fully Loaded. Includes 60SX workbench, X-clamps, Side shelf, Tool chest with ball-bearing slides, Interior shelf,
Quick-remove vise, Weld curtain, Casters, Gun holder, Tool holder, and Clamp bar.
Part No. 300613, 6” X-clamps
Part No. 300850, 5” X-clamps
Part No. 300680, Side shelf
Part No. 300610, Tool chest with ball-bearing slides
Part No. 300679, Interior shelf
Part No. 300611, 5” Quick-remove vise and mount
Part No. 300612, Quick-remove Mount only
Part No. 300685, 30S series Weld curtain
Part No. 300686, 60S series Weld curtain
Part No. 300849, Casters
Part No. 300614, Convenience kit includes the following: Gun holder, Tool holder, and Clamp bar.
F-Series ArcStation™
•When portability or space-savings is a concern, the F-Series ArcStation is your solution •Wheels, handle, and fold-up design make unit
easy to take to the jobsite or move around the shop •Compact size makes storing unit a breeze. Unit folds down to 6” x 29” x 48” (152 x
737 x 1219 mm). •30” x 30” size tabletop provides plenty of work surface •3/16” X-pattern steel tabletop allows troublefree clamping •1.5” diameter steel tube frame provides strength and durability •Includes removable gun holder •Add the optional 5” X-clamps
(#300850) to make this the ultimate portable workbench
Part No. 300837, 30FX.
Part No. 300850, 5” X-clamps.
Features
30FX
30S
30SX
60S
Steel Top
(1) 29 x 29 x 3/16” X-pattern (1) 29 x 29 x 3/16” solid
(1) 29 x 29 x 3/8” X-pattern
(2) 29 x 29 x 3/16” solid
Load Capacity 500 lb. (227 kg)
1,000 lb. (454 kg)
1,000 lb. (454 kg)
1,000 lb. (454 kg)
Dimensions 35” x 29” x 35”
35” x 29” x 29”
35” x 29” x 29”
35” x 58” x 29”
(889 x 737 x 889 mm)
(889 x 737 x 737 mm)
(889 x 737 x 737 mm)
(889 x 1,473 x 737 mm)
Weight
74 lb. (34 kg)
123 lb. (56 kg)
177 lb. (80 kg)
230 lb. (104 kg)
60SX
60SX Fully Loaded
(1) 29 x 29 x 3/8” solid
(1) 29 x 29 x 3/8” X-pattern
1,000 lb. (454 kg)
35” x 58” x 29”
(889 x 1,473 x 737 mm)
318 lb. (144 kg)
MILLER®
MLR/2784
MIG Welding Guns
Bernard™ AIR-COOLED MIG GUNS
Part No.
Amperage
Q3015AE8CLC
Cable Length
Handle & Trigger
Neck
Contact
Tip
300 amp
Wire Size
Power Pin
0.035” (0.9 mm)
Lincoln
Q3015AE8CMC
0.035” (0.9 mm)
Miller
Q3015AE8ELC
0.045” (1.2 mm)
Lincoln
Q3015AE8EMC
0.045” (1.2 mm)
Miller
Q4015AE8CLC
400 amp
15 ft. (4.57 m)
Standard Trigger B Series Small Curved Handle
45° Rotatable, Medium
Centerfire
0.035” (0.9 mm)
Lincoln
Q4015AE8CMC
0.035” (0.9 mm)
Miller
Q4015AE8ELC
0.045” (1.2 mm)
Lincoln
Q4015AE8EMC
0.045” (1.2 mm)
Miller
Bernard™ CONSUMABLES
Part No. 4423R, Insulator Cap.
Part No. QJL-2330, .023 - .030 Jump Liner.
Part No. QJL-3545, .035 - .045 Jump Liner.
Part No. QT2-60, Pipeworx Neck.
Part No. QT3-45, Bernard Neck.
LINERS FOR Bernard™
300, 400 & 500 Amp Best of the Best MIG Guns
Universal Conventional Liner
15 ft. (4.57m)
Part No.
L1A-15
L3A-15*
L4A-15
L6A-15 L7A-15 L8A-15 Wire Size
.023-.030" .035-.045" .045-1/16" 5/64-3/32" 3/32-7/64" 7/64 - 1/8" Liner
Colour
Yellow
White
Red
Blue
Grey
Black
Aluminum/Soft Wire Liners
15 ft. (4.57m)
Gun
Wire Size
Part No.
Amperage
1920343
.035 (.9 mm) 150A 600A Nylon
200A-600A Steel
43115X
3/64 (1.2 mm) 200A-600A Nylon
1920344 200A-600A Steel
44215X 1/16 (1.6 mm) 200A-600A Nylon
1920345 200A-600A Steel
Liner
Universal
Conventional
Liner
Centerfire™ CONSUMABLE SERIES
300, 400 & 500 Amp Best of the Best MIG Guns
Small Centerfire™ Gas Diffusers and Nozzles
Part No. T-023, .023” (0.6 mm) 'T' Series Tip.
Part No. T-062, 1/16” (1.6 mm) 'T' Series Tip.
Part No. NS-5800C, 5/8” I.D., Flush, Copper.
Part No. NS-5818C, 5/8” I.D., 1/8” Rec., Copper.
Part No. NS-5800B, 5/8” I.D., Flush, Brass.
Part No. NS-5818B, 5/8” I.D., 1/8” Rec., Brass.
Part No. NS-1218C, 1/2” I.D., 1/8” Rec., Copper.
Part No. NS-1200B, 1/2” I.D., Flush, Brass.
Part No. NS-1218B, 1/2” I.D., 1/8” Rec., Brass.
Part No. NST-3800B, 3/8” I.D., Flush, Brass.
Part No. NST-3818B, 3/8” I.D., 1/8” Rec., Brass.
Part No. NST-38XTB, 3/8” I.D., 1/8” Extension, Brass.
Part No. 4323R, Nozzle Insulator.
Part No. DS-1, Gas Diffuser.
Part No. NS-FLX, Self-Shielded Conversion Kit (Includes tip
holder and both insulators).
Large Centerfire™ Gas Diffusers and Nozzles
Part No. TT-023, .023” (0.6 mm) 'TT' Series Tapered Tip.
Part No. TT-062, 1/16” (1.6 mm)'TT' Series Tapered Tip.
Part No. N-3400C, 3/4” I.D., Flush, Copper.
Part No. N-3418C, 3/4” I.D., 1/8” Rec., Copper.
Part No. N-3418B, 3/4” I.D., 1/8” Rec., Brass.
Part No. N-5800C, 5/8” I.D., Flush, Copper.
Part No. NT-3800C, 3/8” I.D., Flush, Copper.
Part No. 10012, Insulator Nozzle.
Part No. D-1, Gas Diffuser.
MILLER®
MLR/2784
MIG Welding Guns
MIG WELDING GUNS
MIGmatic™ M-Series guns are an ideal match for Miller® integrated MIG packages and other
Miller wire feeders.
Model
Part No.
M‑100 248282 M‑150 249039 249040 249041 M‑25 169594 169596 1948053 169598 169599 Length
10 ft (3 m) 10 ft (3 m) 12 ft (3.7 m)
15 ft (4.6 m)
10 ft (3 m) 12 ft (3.7 m)
12 ft (3.7 m)
15 ft (4.6 m)
15 ft (4.6 m) Rating and Duty Cycle
(CO2)1
M-100
Wire Size
100 A at 100% Duty Cycle .030 – .035” (0.8 – 0.9 mm)
150 A at 100% Duty Cycle .030 – .035” (0.8 – 0.9 mm)
M-150
250 A at 100% Duty Cycle .030 – .035” (0.8 – 0.9 mm)
250 A at 100% Duty Cycle .035 – .045” (0.9 – 1.2 mm)
M-25
60% with mixed gases
3
#194805 is an M‑25 gun with friction lugs for the Hobart Beta‑MIG 2510.
1
M‑100 can be used on:
•SideKick™
•SideKick™ XL/Cricket® XL/Millermatic® 90
•Millermatic® 130
•Millermatic® 130 XP
•Millermatic® 135/140s/175/180s/DVI™s /211
•Millermatic® Challenger™
•Millermatic® Challenger™ 172
•Millermatic® Passport™/Passport™ Plus
•SideKick™ XL/Cricket® XL/Millermatic® 90
•Millermatic® 120/150
•Millermatic® 130 XP
•Millermatic® 135/140s/175/180s/DVI™s /211
•Millermatic® Challenger™
•Millermatic® Challenger™ 172
•Millermatic® Pulser
•Millermatic® 210/212/250x/251/252
•Millermatic® Vintage
•Millermatic® Reach Wire Feeder
M‑100/M‑150 SERVICE PARTS/
CONSUMABLES
M‑25 SERVICE PARTS/
CONSUMABLES
OPTIONAL M‑SERIES GUN NOZZLES
& TIPS
Part No. 246372, Nozzle, slip type, .500 (12.7 mm) orf flush.
Part No. 226190, Nozzle, slip type, flux cored.
Part No. 087299, Tip, contact scr, .023 (0.6 mm) wire x 1.125.
Part No. 194010, Kit, liner monocoil .023/.025 (0.6 mm) wire
x 15 ft.
Part No. 194011, Kit, liner monocoil .030 – .035 (0.8 – 0.9 mm)
wire x 15 ft.
Part No. 194012, Kit, liner monocoil .035 – .045 (0.9 –1.2 mm)
wire x 15 ft.
M‑10/M‑15 SERVICE PARTS/
CONSUMABLES
Part No. 169716, Adapter, contact tip.
Part No. 169724, Nozzle, slip type, .500 (12.7 mm) orf .125
recess.
recess.
Part No. 169726*, Nozzle, slip type, .625 (15.9 mm) orf flush.
stickout.
Part No. 172034, Tip, contact scr 3/64 (1.19 mm) wire x 1.125.
Part No. 169728, Adapter, contact tip.
Part No. 169729, Adapter, nozzle.
Part No. 194010, Kit, liner monocoil .023/.025 (0.6 mm) wire
x 15 ft.
wire x 15 f.
wire x 15 ft.
Part No. 194014, Kit, liner monocoil 3/64 (1.19 mm) aluminum
wire x 15 ft.
Roughneck® SCREW-ON NOZZLES
Part No. 209035, Copper, 3/8” orifice tapered.
Part No. 207313, Copper, 5/8” orifice, 15/16” O.D.
Part No. 199614, Brass, heavy duty 5/8” orifice.
Part No. 199618, Copper, heavy duty 5/8” orifice.
Part No. 199612, Brass heavy duty 3/4” orifice.
M-SERIES CONSUMABLE KITS
Part No. 199617, Copper heavy duty 3/4” orifice.
To better serve you, Miller has introduced six improved,
affordable MIG consumable kits that are compatible with the M- Part No. 199610, Brass standard 1/2” orifice.
Part No. 199615, Copper standard 1/2” orifice.
Series guns. Each kit contains consumables that are specific
Part No. 209036, Copper, 1/2” orifice tapered.
to your welding application, including gun type and wire size.
Part No. 199613, Brass, standard 5/8” orifice.
Part No. 198855, Copper, standard 5/8” orifice.
Consumable kits contain 10 contact tips, nozzle, and contact
Part No. 199611, Brass, standard 3/4” orifice.
tip adapter.
Part No. 199616, Copper, standard 3/4” orifice.
Part No. 234607, M-10/15, M-100/150 Gun, .023” Wire.
Consumable kits contain 10 contact tips, nozzle, contact tip
adapter, and nozzle adapter.
Part No. 234610, M-25 Gun, .030” Wire.
Part No. 234611, M-25 Gun, .035” Wire.
Part No. 234612, M-25 Gun, .045” Wire.
M‑25 and M‑40 Tapered Nozzles
Part No. 176243, Nozzle, Tapered 3/8” (9.5 mm).
Part No. 178386, Nozzle, Tapered 11/32” (8.7 mm).
M‑25 and M‑40 Tapered Contact Tips (1/4” OD x 1.312”)
Part No. 176797, Contact Tip, Tapered .030” (0.8 mm).
M‑25 and M‑40 Heavy‑Duty Spray Contact Tips (5/16” OD
x 1.125”)
Part No. 187117, Contact Tip, Heavy Duty .035” (0.9 mm).
Part No. 187118, Contact Tip, Heavy Duty .045” (1.2 mm).
MILLER®
MLR/2784
MIG Welding Guns
XR-Aluma-Pro Lite
XR-Aluma-Pro and all Pistol models
•XR-Aluma-Pro and XR-Pistol guns work in conjunction with XR-Controls, XR-AlumaFeed or select Millermatic machines to provide the best
solution for push-pull applications •Threaded quick-change 360° rotatable head tubes are available in different bends and lengths for even those
hard-to-reach welds. Over 30 different styles to fit your application and welder’s preference. •Wire tension settings (except XR-Pistol). 4000 or
5000- specific tension settings ensure the very best wire feeding performance and arc consistency •Heavy-duty construction. All internal components are designed to provide long lasting performance and feeding precision
XR- Aluma-Pro™ Lite: •Lightest weight gooseneck-style gun features rear trigger that allows access to hard-to-reach welds
XR-Aluma-Pro™: •Robust professional-grade gun has the highest duty cycle rating in its class. •Easy access to drive assembly and removable
toolless head tube reduce service time, by allowing a simple means of changing drive rolls and head tube — or performing routine maintenance
without disassembly of gun
XR™-Pistol: •Reliable, cost-effective gun for light- to medium industrial applications
XR™-Pistol-Pro: •Exceptional aluminum welding results for heavy-industrial applications •Most durable motor and drive design improves feedability and arc consistency while helping reduce downtime and maintenance costs •Easy access to drive assembly and removable toolless head tube
reduce service time, by allowing a simple means of changing drive rolls and head tube — or performing routine maintenance without disassembly
of gun
Processes:
• MIG (GMAW) with aluminum wire (capable of other wires with optional hardwire kits) • Pulsed MIG (GMAW-P) with optional pulsing power source
XR™ PUSH-PULL GUNS
XR-Aluma-Pro
XR-Pistol-Pro
Model No.
Gun & Cable Length
Part No.
15-ft. (4.6 m) 25-ft. (7.6 m) 30-ft. (9 m) 35-ft. (10.6 m)
Welding Current
Rating
XR-Aluma-Pro Lite
—
300948
—
—
(Air-cooled)
XR-Aluma-Pro
300000
300001
—
300264
(Air-cooled)
300264002*
XR-Aluma-Pro
300003
300004
—
300265
(Water-cooled)
XR-Pistol
198127
—
198128
—
(Air-cooled)
XR-Pistol
198129
—
198130
—
(Water-cooled)
XR-Pistol-Pro
300782
300783
—
300784
(Air-cooled)
XR-Pistol-Pro
300786
300787
—
300788
(Water-cooled)
*Comes with remote.
XR™-Aluma-Pro™ CONSUMABLES
Wire Feed Speed
Wire Type and Diameter
Capacity
70–900 IPM
(1.8–23 m/min.)
70–900 IPM
(1.8–23 m/min.)
70–900 IPM
(1.8–23 m/min.)
70–875 IPM
(1.8–22.2 m/min.)
70–875 IPM
(1.8–22.2 m/min.)
70–900 IPM
(1.8–23 m/min.)
70–900 IPM
(1.8–23 m/min.)
4”H x 1.9”W x 15”L
Aluminum
(102 mm x 48 mm x
.030 –.047” (0.8–1.2 mm)
381 mm)
5”H x 2.5”W x
Aluminum
.030 –.052” (0.8–1.3 mm) 17”L (127 mm
x 64 mm x 432
Aluminum
.030 –.052” (0.8–1.3 mm) mm)
Aluminum
.030 –1/16” (0.8–1.6 mm)
Aluminum
7.4”H x 1.9”W x
.030 –1/16” (0.8–1.6 mm)
10.6”L (187 mm x
Aluminum
48 mm x 270 mm)
.030 –.052” (0.8–1.3 mm)
Aluminum
.030 –.052” (0.8–1.3 mm)
Dimensions
Net Weight
(Gun only)
2.0 lb. (0.9 kg)
2.5 lb. (1.1 kg)
2.9 lb. (1.3 kg)
2.2 lb. (1 kg)
2.4 lb. (1.1 kg)
2.2 lb. (1 kg)
2.4 lb. (1.1 kg)
•Millermatic® 252 •Millermatic® 350P/350P Aluminum
These power sources require XR-AlumaFeed or XR-Control
•Deltaweld® Series •Invision™ MPa •AlumaPower™ MPa •XMT® Series (except VS model) •Trailblazer® Series
XR™-Aluma-Pro LITE
Part No. 206186, .030-.035” (0.8-0.9 mm) FasTip Contact Tip.
CONSUMABLES
Part No. 254477, Head Tube Assembly.
Part No. 258541, Kit, Jump Liner Assy .030-.035 (5 pk).
Part No. 206189, 3/64-.052” (1.2-1.3 mm) FasTip Contact Tip.
Part No. 258542, Kit, Jump Liner Assy .047-.062 (5 pk).
Part No. 206190, 1/16” (1.6 mm) FasTip Contact Tip.
Part No. 258726, Kit, Jump Liner Assy .030-.035 14” Long
Part No. 206191, 1/16-.068” (1.6-1.7 mm) FasTip Contact Tip.
(5 pk).
Part No. 209026, .030-.035” (0.8-0.9 mm) Tapered FasTip
Part No. 258727, Kit, Jump Liner Assy .047-.062 14” Long
Contact Tip.
(5 pk).
Part No. 209027, .035-.045” (0.9-1.2 mm) Tapered FasTip
Part No. QT2-45, Tube, Body 45° x 2.69 Large.
Contact Tip.
Part No. T-035AL, Centerfire Contact Tip, Aluminum .035.
Part No. 209029, .052” (1.3 mm) Tapered FasTip Contact Tip.
Part No. T-047AL, Contact Tip, Centerfire .047 Aluminum.
Part No. 229887, 15 ft (4.6 m) Cable Liner.
Part No. 233999, Long Cable Liner.
Part No. 233998, Short Cable Liner.
Part No. 227158, Head Tube Short
Part No. 229672, Head Tube Long
Part No. 227159, Insulating Jacket, short.
Part No. 229673, Insulating Jacket, long.
Part No. 227161, 4” (102 mm) Teflon Air-Cooled Head Tube Liner Short Barrel, .030” (0.8 mm) to .035” (0.9 mm).
Part No. 230239, 4” (102 mm) Teflon Air-Cooled Head Tube Liner Short Barrel, .047” (1.2 mm) to .062” (1.6 mm).
Part No. 229674, 6” (152 mm) Teflon Air/Water Cooled Head Tube Liner Long Barrel, .030” (0.8 mm) to .035” (0.9 mm).
Part No. 229431, 6” (152 mm) Teflon Air/Water Cooled Head Tube Liner Long Barrel, .047” (1.2 mm) to .062” (1.6 mm).
Part No. 227408, Inlet Guide.
Part No. 227416, Insulator Ring Rear.
Part No. 227434, Drive Roll.
Part No. 227439, .035” (0.9 mm) to .052” (1.3 mm) Idler Roll.
Part No. 230710, .062” (1.6 mm) Idler Roll.
Part No. 231519, Air-Cooled Assembly Kit Short Barrel, 4” (102 mm).
Part No. 231518, Air-Cooled Assembly Kit Long Barrel, 6” (152 mm).
XR™-Pistol Pro Plus CONSUMABLES
Air-cooled parts breakdown shown.
Part No. 258474, Kit, Head Tube Assy (Air) AP/PP 180 Degree
4” Lg Cntrfr.
Part No. N-5818C, Nozzle, C-Fire Large Copper 5/8” Recess
1/8”.
Part No. T-047AL, Contact Tip, Centerfire .047 Aluminum.
Part No. D-1AP, Diffuser, Centerfire-D-1AP.
Part No. 232284, Insulator, Nozzle Collared Diffuser (For 180°/
Straight Only).
Part No. 227168, Nut, Head Tube Rotation.
Part No. 230969, Kit, Replacement - Rings Head Tube Air.
Part No. M1442, Liner, Teflon .047-.062 Wire Soft Pro/Plus.
Part No. 227408, Inlet Guide.
Part No. 227416, Insulator Ring Rear.
Part No. 227434, Drive Roll.
Part No. 229673, Insulating Jacket, long.
Part No. T-035AL, Centerfire Contact Tip, Aluminum .035.
XR™-Pistol Pro CONSUMABLES
Air-cooled parts breakdown shown.
Part No. 255716, Kit, Head Tube Assy (Air) AP/PP 180° 4”.
Part No. 198855, Nozzle, Copper 5/8”.
Part No. 206189, Tip, Fastip .312 Od .052 And 3/64 Al Wires.
Part No. 229670, Diffuser, .281/.312 Od Collar Fastip 1/8 Rec
Aluma.
Part No. 232284, Insulator, Nozzle Collared.
Part No. 227168, Nut, Head Tube Rotation.
Part No. M1273, Liner, Teflon .047-.062 Wire Pistol Pro.
Part No. 230969, Kit, Replacement O-Rings Head Tube Air.
XR™-Aluma-Pro Plus™
CONSUMABLES
Part No. 233999, Long Cable Liner.
Part No. 233998, Short Cable Liner.
MILLER®
MLR/2784
MIG Spool Guns
Spoolmatic® SPOOL GUNS
•Portable, aluminum wire feed system for industrial applications •Integrated spool canister rotates 180° for operator flexibility and comfort •Available in 15 or 30 ft. cable
lengths, providing flexibility to be used in the shop and in the field •Two-stage trigger with built-in gas valve allows for gas preflow, and eliminates the need to purge
long gas lines •Wire feed speed adjustment on the gun handle and reversible drive rolls save time and money •Quick-change, single-turn contact tip provides excellent
performance and is easy to replace
Spoolmatic
•Cost-effective, industrial aluminum spool gun.
Processes:
• MIG (GMAW) with aluminum and other soft alloy wires •MIG
(GMAW) with hard wires • Pulsed MIG (GMAW-P) with optional
pulsing power source
Part No. 195156, 15 ft. (4.5 m) cable.
Part No. 130831, 30 ft. (9 m) cable.
Part No. 137546, WC-115A.
Part No. 137546-01-1, WC-115A (with contactor).
Part No. 137549, WC-24.
Spoolmatic Pro
•The most reliable, easy-to-use spool gun in the industry for the professional welder •Wire tension settings. 4000 or 5000-specific tension settings ensure the very best wire feeding performance and arc consistency •Most durable motor and drive design
improves feedability and arc consistency while helping reduce downtime and maintenance costs •Easy access to drive assembly
and removable toolless head tube reduce service time, by allowing a simple means of changing drive rolls and head tube — or
performing routine maintenance without disassembly of gun •Easy-to-rotate, self-seating head tube allows for better access
into tight spots, preventing leaks and providing excellent current transfer. Head tubes are common with the XR-Aluma-Pro
gooseneck-style guns. •Head tube options in several different lengths and bend configurations are available for use when a
standard head tube doesn’t fit the application
Processes:
• MIG (GMAW) with aluminum and other soft alloy wires •MIG (GMAW)
with hard wires • Pulsed MIG (GMAW-P) with optional pulsing power
source
Part No. 301147, 15 ft. (4.5 m) cable.
Part No. 301148, 30 ft. (9 m) cable.
Part No. 137546, WC-115A.
Part No. 137546-01-1, WC-115A (with contactor).
Part No. 137549, WC-24.
Maximum Spool
Size Capacity
Spoolmatic
200 A at 100% duty cycle 70– 875 IPM
Aluminum* .030 –1/16” (0.8 –1.6 mm)
4” (102 mm)
(1.8 – 22.2 m/min.)* Hard Wire .030 –.045” (0.8 –1.1 mm)
Spoolmatic
200 A at 100% duty cycle 70– 900 IPM
Aluminum* .030 –1/16” (0.8 –1.6 mm)
4” (102 mm)
Pro
(1.8 – 23 m/min.)* Hard Wire .030 –.045” (0.8 –1.1 mm)
Model No.
Wire Feed Speed
*Wire speed dependent on control or Millermatic used
Net Weight with
Gun only
10.25”H x 2.5”W x 2.9 lb. (1.3 kg)
15.2”L (260 mm x
64 mm x 384 mm)
10.75”H x 2.5”W x 3.0 lb. (1.4 kg)
15.4”L (273 mm x
64 mm x 390 mm)
Dimensions
•Millermatic® 212 Auto-Set™ •Millermatic® 252 •Millermatic® 350P/350P Aluminum (except Spoolmatic Pro) •Shopmate™ 300 DX •Bobcat™
Series — with SGA 100C control
These power sources require WC-24 control (#137549)
•CP-302 •Deltaweld® Series •Invision™ MPa •AlumaPower™ MPa •Dimension™ Series XMT® Series (except VS model) •Trailblazer® Series
MILLER®
MLR/2784
MIG Spool Guns
Spoolmate™ SPOOL GUNS
•Reliable and economical spool guns designed for home hobbyists and light fabricators.
Spoolmate 100
•For use with Millermatic 141, 190 and 211, Multimatic 200
and Syncrowave 210 TIG/MIG Complete •Light industrial
gun for 4043 series aluminum wire rated at 135 amps at 30%
duty cycle •12 ft. direct-connect cable with heavy-duty strain
relief provides extended reach and accessibility to your work
•Dual V-knurled drive rolls with adjustable tension control
for consistent feeding of different types of wire •Clear spool
canister protects the wire and allows you to easily see the spool
•Includes carrying case, extra contact tips and nozzle
Processes:
• MIG (GMAW) with aluminum and other soft alloy wires • MIG
(GMAW) with hard wires
Part No. 300371.
Part No. 111400, Hose, SAE .187” ID x .410” OD x 8 ft.
Part No. 186404, Gun Tube Assembly.
Part No. 186405, Nozzle.
Spoolmate 200
•For use with Millermatic 212 and 252 models •Light industrial
gun for 4000 or 5000 series aluminum wire rated at 160 amps
at 60 percent duty cycle •20 ft. weld/control cables with strain
relief and sheath provide extended reach and accessibility to
your work •Wire feed speed adjustment on the gun —not the
machine—for easy setup •Easy access to drive assembly and
drive rolls •Two-stage trigger with built-in gas valve allows for
gas preflow and postflow •Toolless head tube removal for easy
replacement •Three optional head tubes
Processes:
Part No. 300497.
Part No. 300591, 45° Head Tube.
Part No. 300592, 9” Extension Head Tube.
Part No. 300593, Heavy-Duty Head Tube.
Part No. 195287, Spoolmatic Adaptor Cable. Allows connection to older Millermatic 210 and 212 (non-Auto-Set).
Part No. 243390, Contact Adapter
Part No. 186405, Nozzle.
Spoolmate 3035
•For use with vintage Millermatic tapped voltage 210 and 212
models. Use with current Millermatic and Bobcat 225 models
requires an SGA 100 or 100C control. •Light industrial gun
for 4000 or 5000 series aluminum wire rated at 150 amps at
60% duty cycle •20 ft. weld/control cables with strain relief and
sheath provide extended reach and accessibility to your work
•Light weight and well balanced for operator comfort •Clear
spool canister protects the wire and allows you to easily see the
spool •Easy-to-remove barrel assembly
Processes:
Part No. 195016.
Part No. 043856, SGA 100.
Part No. 043857, SGA 100C.
Part No. 195375, Heavy-Duty Head Tube.
Part No. 196848, Contact Adapter.
Part No. 197570, Anti-Rotation Pin.
Maximum Spool
Size Capacity
Spoolmate
135 A at 30% duty cycle 5– 625 IPM Aluminum .030 –.035” (0.8 – 0.9 mm)
4” (102 mm)
100
(1.7–15.9 m/min.)* Solid Steel .023 –.035” (0.6 – 0.9 mm)
Stainless .023 –.035” (0.6 – 0.9 mm)
Spoolmate
160 A at 60% duty cycle, 70– 875 IPM
Aluminum .030 –.035” (0.8 – 0.9 mm)
200
200 A at 60% duty cycle with (1.8–22.2 m/min.) Solid Steel .023 –.035” (0.6 – 0.9 mm)
optional heavy-duty head tube
Stainless .023 –.035” (0.6 – 0.9 mm)
Spoolmate
150 A at 60% duty cycle, 115–715 IPM
Aluminum .023 –.035” (0.6 – 0.9 mm)
3035
200 A at 60% duty cycle with (2.9 –18.1 m/min.) Solid Steel .023 –.035” (0.6 – 0.9 mm)
optional heavy-duty head tube
Stainless .023 –.035” (0.6 – 0.9 mm)
Model No.
Wire Feed Speed
*Wire speed dependent on power source used
Net Weight with
Cable Assembly
11.5”H x 3”W x
6 lb. (2.7 kg)
13”L (291 mm x (9 lb. (4.1 kg)
76 mm x 330 mm) with case)
9”H x 2.5”W x
11 lb. (5 kg)
14.5”L (229 mm x
64 mm x 368 mm)
11.5”H x 2.25”W x 9.1 lb. (4.1 kg)
8”L (291 mm x
57 mm x 203 mm)
Dimensions
For Spoolmate 100
•Millermatic® 141 •Millermatic® 190 •Millermatic® 211 Auto-Set™ with MVP™ •Multimatic™ 200 •Syncrowave™ 210 TIG/MIG Complete
For Spoolmate 200
• Millermatic® 212 Auto-Set™ •Millermatic® 252
For Spoolmate 3035
•Direct connect to vintage Millermatic 210/212 tapped-voltage models •Millermatic® 141/190/211/212 with SGA 100 control • Bobcat™ 225 with SGA 100C control
Spoolmate™ CONSUMABLES
Part No. 186406, Contact Tip, .035 M5 x .8 mm Thread.
Part No. 186409, Gas Diffuser.
Part No. 186414, .030” (0.8 mm) to .035” (0.9 mm) V-Knurl Drive Roll.
MILLER®
MLR/2784
Automated MIG Accessories
COOLANT FLOW SWITCH
For Auto-Axcess. To ensure coolant is flowing in the system. Lack of coolant flow may cause damage
to water-cooled guns. Module allows wiring into the peripheral connector port. 50 ft. (15.2 m) cable
with connector and separate shell connector for simple modification to desired length in the field. It
can be mounted on Auto-Axcess or as desired elsewhere. Quarter-turn quick connection.
Part No. 195461.
Carts, Cylinder Racks and Running Gear
CYLINDER CART
UNIVERSAL CART &
CYLINDER RACK
FEEDER CART
DUAL EZ-CHANGE™ LOW
CYLINDER RACK WITH
ELEVATED GUN & CABLE
RACK
ELEVATED GUN & CABLE
RACK
DUAL CYLINDER RACK
MIGRunner™ CART
RUNNING GEAR CYLINDER THUNDERBOLT XL
RACK
RUNNING GEAR
For Invisions, XMTs, and CST 280. Has adjustable handles and is slanted for convenient
access to power source front panel controls.
Carries two 160-pound (72.6 kg) gas bottles
with feeder mounted to tray above power
source. Accommodates Coolmate 3 or 4
coolant system.
Part No. 042537.
For Millermatic 212 Auto-Set and 252, and
Syncrowave 210. Allows operators to easily
roll cylinders on and off the rack with no lifting.
Gun and cable rack keeps cables off the floor
and tangle free.
Part No. 300337.
For Invisions, AlumaFeed System, and XMTs
with single feeders. Small footprint and easily
maneuverable, with cylinder rack low enough
that you do not have to lift bottles. Durable,
heavy-duty ergonomic handles are designed
for comfort.
Part No. 195445.
A low-profile, creeper cart which allows the
For Invision 352 MPa, XMT 304/350, CST 280, operator to easily move the feeder around the
work area.
Diversions, Maxstar 200/280, and Dynasty
Part No. 142382.
200/280. Also accommodates single gas
cylinder up to 56” (142.2 cm) high measuring
6” to 9” (15.2 to 22.8 cm) in diameter. Provides
storage for auxiliary items such as electrodes,
helmets and gloves.
Part No. 042934.
For Millermatic 212 Auto-Set and 252, and
Syncrowave 210. For use with single cylinder
rack. (Included with Dual EZ-Change Low
Cylinder Rack.)
Part No. 300335.
For Invisions, Axcess 300/450, Dimension 650,
and XMTs with single or dual feeders. Holds
two large gas cylinders and has gun cable
hangers and a consumable drawer in front. A
convenient handle allows the cart to be pulled
easily through doorways. Power source and
single or dual feeders can be mounted to cart
and secured.
Part No. 300408.
For Millermatic 350P and 350P Aluminum.
Replaces single cylinder rack.
Part No. 195299.
Mounts easily to unit and provides convenient
portability. Includes two wheels, two feet and
a handle.
Part No. 043927.
RUNNING GEAR/CYLINDER
RACK
For Millermatic 141, 190, 211 Auto-Set, and
Diversions. Heavyduty construction with 8”
rubber rear wheels. Convenient front handles,
cable holders and plastic consumable box. For
gas cylinders no greater than 7” (178 mm) in
diameter or 65 pounds (29.5 kg) in weight.
Part No. 301239.
STANDARD RUNNING
GEAR & CYLINDER RACK
For CP-302, Deltawelds, Dimensions, and
Gold Stars. Running gear has 10” (254 mm)
rear wheels and 5” (127 mm) front casters
for excellent mobility on the shop floor. Very
easy to install. Handles double as a cable
holder. Cylinder rack only installs on Standard
Running Gear.
Part No. 042886, Running gear.
Part No. 042887, Cylinder rack.
2-WHEEL TROLLEY CART
For Maxstar/Dynasty 200 with or without
Coolmate 1. Easy-to-maneuver two-wheel cart
features single-cylinder rack, chain for cylinder,
straps (quick and easy to detach and carry
machine), cable holders, torch holder, storage
area, and filler rod storage area.
Part No. 300480.
MILLER®
MLR/2784
Carts, Cylinder Racks and Running Gear
Small Runner™ CART
For Maxstar/Dynasty 280 with or without
Coolmate 1.3. Cart features single cylinder
rack, foot pedal holder, two cable/torch holders
and two TIG filler holders.
Part No. 300988.
Runner™ CART
For Maxstar 350/700 and Dynasty 350/700
with or without Coolmate 3.5. Cart features
single cylinder rack, foot pedal holder, three
cable/ torch holders and two TIG filler holders.
Part No. 300244.
No. 37 RUNNING GEAR
For Syncrowave 250 DX/350 LX. Includes two
10” (254 mm) wheels, two 5” (127 mm) casters, two-compartment rack for gas cylinders,
and handles. Provides excellent mobility and
easy to install.
Part No. 195282.
SHOPMATE 300 RUNNING
GEAR/DUAL CYLINDER
RACK
For Shopmate 300 DX. The large 10” (254
mm) rear wheels and 5” (127 mm) front casters
on this running gear provide excellent mobility
on the shop floor, making it easier to move the
power source. Very easy to install. Handles
double as a cable holder. Holds two cylinders.
Part No. 300145.
Coolant Systems
Coolmate™ COOLANT SYSTEMS
Part No. 300360, Coolmate™ 1. 115 VAC. For Maxstar/Dynasty 200. Light industrial, 1-gallon cooler designed for
water-cooled torches on power sources rated up to 200 A*.
Part No. 300972, Coolmate™ 1.3. 115 VAC. For Maxstar/Dynasty 280. Light industrial, 1.3-gallon cooler designed
for water-cooled torches on power sources rated up to 280 A*.
Part No. 043007, Coolmate™ 3. 115 VAC. Economical, 3-gallon cooler designed for water-cooled torches rated up
to 500 A*.
Part No. 043008, Same as above except 230 VAC.
Part No. 300245, Coolmate™ 3.5. 115 VAC. For Maxstar 350/700 and Dynasty 350/700. Industrial, 3.5-gallon cooler
designed for water-cooled torches rated up to 600 A*.
*May vary with torch design and cable length. Miller coolant systems are backed by the best warranty in the industry — one full year.
Motor Input
Maximum Current Draw
Voltage
Coolmate 1 115 VAC, 60 Hz 2.1 A (60 Hz)
Coolmate 1.3 115 VAC, 60 Hz 4.7 A (60 Hz)
Coolmate 3 115 VAC, 50/60 Hz 5.9 A (50 Hz), 4.7 A (60 Hz)
230 VAC, 50/60 Hz 2.5 A (50 Hz), 3.0 A (60 Hz)
Coolmate 3.5 115 VAC, 50/60 Hz 5.9 A (50 Hz), 4.7 A (60 Hz)
Coolmate 4 115 VAC, 50/60 Hz 5.9 A (50 Hz), 4.7 A (60 Hz)
Model
Maximum Cooling
Tank
IEC Cooling Capacity
Capacity
Capacity
2850 W (9700 BTU/hr.) 1210 W (4120 BTU/hr.) 1 gal. (3.8 L)
1.8 qt./min. (1.7 L/min.) 1.1 qt./min. (1 L/min.)
3400 W (11,600 BTU/hr.) 1330 W (4540 BTU/hr.) 1.3 gal. (4.9 L)
3820 W (13,000 BTU/hr.) 1420 W (4840 BTU/hr.) 3 gal. (11.4 L)
4140 W (14,000 BTU/hr.) 1660 W (5660 BTU/hr.) 3.5 gal. (13.2 L)
5500 W (18,000 BTU/hr.) 1780 W (6070 BTU/hr.) 4 gal. (15 L)
Dimensions
8”H x 7.5”W x 23.75”D
(203 mm x 191 mm x 603 mm)
11.25”H x 10.38”W x 24”D
(286 mm x 264 mm x 610 mm)
13.25”H x 12.25”W x 23.25”D
(337 mm x 311 mm x 584 mm)
11.75”H x 15.75”H x 26”D
(298 mm x 400 mm x 660 mm)
16.25”H x 15.25”W x 18.75”D
(413 mm x 387 mm x 476 mm)
Net Weight
25 lb. (11 kg)
43 lb. (20 kg)
40 lb. (18 kg)
64 lb. (29 kg)
38 lb. (17 kg)
COOLANT
Sold in multiples of four in 1-gallon recyclable plastic bottles. Miller® coolants contain a base of ethylene glycol and
deionized water to protect against freezing to -37° Fahrenheit (-38° C) or boiling to
227° Fahrenheit (108° C).
Part No. 043810, Low-Conductivity Coolant (clear, pre-mixed). For TIG and MIG applications. NOT for use in pushpull systems or systems where aluminum is in coolant path/circuit.
Part No. 043809, Aluminum-Protecting Coolant (green, pre-mixed). Primarily used in push-pull systems where
aluminum is in coolant path/circuit and high frequency is NOT used.
Engine Drive Accessories
CABLE HOLDER
For Big Blue 400 and 500 CC, 500 Pro, 700
Duo Pro, 800 Duo Pro, and 800 Duo Air Pak.
Part No. 043946.
VANDALISM LOCKOUT KIT
Lockable hinged steel panels cover and
protect name plate gauges and ignition switch
(padlock included). Also includes engine
compartment door lock and key.
Part No. 195118, For Big Blue 400 and 500
CC.
Part No. 399802, For
Big Blue 500 Pro and
700 Duo Pro.
LIFTING EYE
For current model Blue Star 185.
Part No. 195353.
RUNNING GEAR
For current model Blue Star 185. Compact
and balanced, lightweight wheelbarrow-style
running gear provides easy onsite mobility.
Part No. 301246.
MILLER®
MLR/2784
Engine Drive Accessories
MULTI-TERRAIN RUNNING
GEAR
OFF-ROAD RUNNING GEAR
For Gas/LP Bobcats and Trailblazers. Includes
For Gas/LP Bobcats and Trailblazers. Includes four heavy-duty 15” tires and a rugged handle
to provide maximum maneuverability.
two heavy-duty 15” tires, two 8” rubber swivel
Part No. 300909, With inner tubes.
casters and a heavy-duty handle. Recommended for all surfaces and applications and is Part No. 300910, With Never Flat™ tires.
easy to move around the jobsite.
Part No. 300913, With inner tubes.
Part No. 300914, With Never Flat™ tires.
GAS CYLINDER MOUNTING HOSE & LP TANK
ASSEMBLY
MOUNTING ASSEMBLY
OFF-ROAD RUNNING GEAR
with PROTECTIVE CAGE &
NEVER FLAT™ TIRES
PROTECTIVE CAGE with
CABLE HOLDERS
REMOTE OIL DRAIN &
FILTER KIT
ALL-PURPOSE RUNNING
GEAR with NEVER FLAT™
TIRES
For Gas/LP Bobcats and Trailblazers. Running
gear and rugged cage with cable holders
protects your investment and is easy to move
around the jobsite.
Part No. 300912.
For Gas Bobcats and Trailblazers. Designed
for use with Running Gear, Protective Cage,
or by itself. Includes base tray with bottle
bracket, vertical support rack and safety chain.
Note: Not for use with LP Tank Mounting
Assembly. Not recommended for use with
Protective Cover.
Part No. 300918.
For LP Bobcats and Trailblazers. Designed for
use with Running Gear, Protective Cage, or by
itself. Includes bracket and clamp to mount 33
and 43-pound tanks horizontally, and hose with
fittings to converter. Note: Cannot be used
with Gas Cylinder Mounting Assembly. Not
recommended for use with Protective Cover.
Part No. 300917.
PROTECTIVE CAGE WITH
CABLE HOLDERS
GAS CYLINDER MOUNTING FULL KVA ADAPTER CORD
For Bobcats, Trailblazers, and Big Blues
ASSEMBLY
For Diesel Bobcats and Trailblazers. Rugged
cage with cable holders protects your investment. Works with Running Gear, Gas Cylinder
Mounting Assembly or with trailer. Note: Not
for use with Protective Cover.
Part No. 195331.
For Diesel Bobcats and Trailblazers. Designed
for use with Protective Cage, or by itself.
Includes base tray with bottle bracket, vertical
support rack and safety chain. Note: Not
recommended for use with Protective Cover.
Part No. 195330.
For Gas Bobcats and Trailblazers. Front
mount for Kohler engines makes servicing
easy when engine drive is mounted in tight
spots.
Part No. 300923.
(except 400 and 500 CC). NEMA 14-50P to
NEMA 6-50R. Adapts engine drive 120/240volt plug to common Millermatic and Spectrum
240-volt plug.
Part No. 300517.
Rugged cage with cable holders protects
your investment. Works with Running Gear,
Gas Cylinder Mounting Assembly or LP Tank
Mounting Assembly.
Part No. 300921, For Gas/LP Bobcats and
Trailblazers.
Part No. 300473, For Trailblazer 302 Air Pak.
For Diesel Bobcats and Trailblazers. Includes
two heavy-duty 15” tires, two 8” rubber swivel
casters and a heavy-duty handle. Recommended for all surfaces and applications and is
easy to move around the jobsite.
Part No. 300477.
SINGLE-PHASE FULL KVA
PLUG KIT
For Bobcats, Trailblazers, and Big Blues
(except 400 and 500 CC). Can be wired for
120 or 240 VAC loads.
Part No. 119172.
THREE-PHASE FULL KVA
PLUG KIT
Part No. 165963, For Bobcat 3 Phase.
Part No. 254140, For Big Blue 500 Pro, 700
Duo Pro, 800 Duo Pro, and 800 Duo Air Pak.
Protective Covers
Heavy-duty, water- and mildew-resistant covers protect and maintain the finish of the welder.
Part No. 301245, For current model Blue Star 185.
Part No. 300919, For current model Gas Bobcats and Trailblazers (except Air Pak) without Protective Cage or Running Gear.
Part No. 300920, For current model Gas Bobcats and Trailblazers (except Air Pak) with Protective Cage or Running Gear.
Part No. 301099, For current model Diesel Bobcats and Trailblazers without Protective Cage or Running Gear.
Part No. 300379, For Trailblazer 302 Air Pak.
Part No. 195301, For Big Blue 350 PipePro, 400 Pro, and 450 Duo CST.
Part No. 194683, For Big Blue 400 and 500 CC, 500 Pro (CA model), and 700 Duo Pro.
Part No. 301113, For Big Blue 500 Pro (T4F model), 800 Duo Pro and 800 Duo Air Pak.
Part No. 301262, For Millermatic 141 and 190.
Part No. 195149, For Millermatic 211 Auto-Set with MVP.
Part No. 195142, For Millermatic 212 Auto-Set, 252, 350P/350P Aluminum, and Syncrowave 210. Features side pocket.
Part No. 300388, For Spectrum 875.
Part No. 300184, X-CASE for Spectrum 375 X-TREME and 625 X-TREME, and Maxstar 150 models.
Part No. 195321, For Maxstar 200 Series.
Part No. 195478, For XMT 304 and 350.
MILLER®
MLR/2784
MIG Accessories
INDUSTRIAL MIG 4/0 KIT
Consists of flowmeter regulator with 10 ft. (3
m) gas hose, 10 ft. (3 m) 4/0 feeder weld cable
with lugs, and 15 ft. (4.6 m) work cable with
600-amp C-clamp. Dual kit comes with two
flowmeter regulators and gas hoses.
Part No. 300390, For single feeders.
Part No. 300957, For dual feeders.
INDUSTRIAL MIG 4/0 KIT
with DINSE CONNECTOR
Same as Industrial MIG 4/0 Kit except weld
and work cables have Dinse connector on one
end instead of lug.
Part No. 300405, For single feeders.
Part No. 300956, For dual feeders.
SHOPMATE 300 MIG KIT
Includes flow gauge regulator and 10 ft. (3 m)
gas hose for argon or AR/CO2 mix, 10 ft. (3
m) 1/0 inter connecting cable, 15 ft. (4.6 m)
1/0 work cable with clamp, and consumable
storage box.
Part No. 300150.
OPTIMA™ MIG PULSE
CONTROL
For XMT CC/CV models. A multipurpose,
microprocessor-based pulse control for synergic MIG (wire welding or GMAW), manual MIG
pulsing or standard MIG welding. Use this
control with above power
sources and any Miller®
wire feeder, including automatic feeders and spool
guns. Includes 25 ft. (7.6
m) cord with 14-pin plug.
Part No. 043389.
Stick Accessories
NO. 2 STICK CABLE SET
2/0 STICK CABLE SET
Consists of 15 ft. electrode cable with holder
and work cable with clamp. 200 A, 100% duty
cycle.
Part No. 195196, 15 ft. (4.6 m).
Consists of either 50 ft. 2/0 electrode cable
with holder and 50 ft. work cable with clamp.
100% duty cycle.
Part No. 173851, 50 ft. (15 m), 350 A.
TIG Accessories
TIG CONTRACTOR KIT
Miller Multimatic™ 200 TIG Kit with foot control
provides everything you need for remote TIG
welding with the Multimatic™ 200 multiprocess
welder.
Comes complete with: •Weldcraft® 150-amp
WP-17 TIG torch with 25 mm Dinse connector
•AK-2 torch accessory kit •Remote foot control
•Smith flow regulator and gas hose
Part No. 301130.
RFCS-6M (6-pin plug)
CONTROL
For Maxstar 150 STL and STH, and Multimatic
200.
Part No. 195183, 13.25 ft. (4 m) cord.
Part No. 195504, 20-ft (6 m) cord.
WELDCRAFT™ WATERCOOLED TORCH KITS
14-PIN TO 6-PIN ADAPTER
CORD
RCCS-6M (6-pin plug)
CONTROL
RFCS-5 (5-pin plug)
CONTROL
RFCS-14 (14-pin plug)
CONTROL
RMLS-14 (14-pin plug)
ROCKER SWITCH
For Maxstars (except 150 models), Dynastys,
and Syncrowave 250 DX/350 LX. Kit comes
with 25 ft. (7.6 m) TIG torch with Dinse-style
connector (thread-lock on 400-amp kit), torch
cable cover, work clamp with 15 ft. (4.6 m)
cable [12 ft. (3.7 m) cable on 400-amp kit],
flowmeter regulator with gas hose, and torch
accessory kit.
Part No. 300185, 250 A, W-250 (WP-20).
Part No. 300186, 400 A, W-400 (WP-18SC).
Foot pedal current/contactor control. Includes
cord and plug.
Part No. 043716, 20-ft (6 m) cord.
For Maxstar 150 STL and STH, and Multimatic
200. Adapts Miller® 14-pin foot control or
fingertip control to a 6-pin plug.
Part No. 300507.
HD foot pedal current/contactor control.
Includes cord and plug.
Part No. 043554, 20-ft (6 m) cord.
North/south rotary-motion fingertip current/
contactor control attaches to TIG torch using
two hook-and-loop fasteners. Great for applications that require a finer amperage control.
Includes cord and plug.
Part No. 195184, 13.25 ft. (4 m) cord.
Momentary- and maintained-contact rocker
switch for contactor control. Push forward
for maintained contact and backward for
momentary contact. Includes 26.5 ft. (8 m)
cord and plug.
Part No. 129337.
MILLER®
MLR/2784
TIG Accessories
50 MM DINSE-STYLE with
WATER RETURN LINE
For Maxstar 200/280/350, Dynasty
200/280/350, and Syncrowave 250 DX/350
LX. Used with all Weldcraft™ water-cooled
torches.
Part No. 195377.
AIR-COOLED TIG (GTAW)
TORCH CONNECTORS
CABLE COVERS
Part No. WC-4-10, 10 ft. (3 m).
Part No. WC-4-22, 22 ft. (6.7 m).
For CST 280, Maxstar 200/280/350, Dynasty
200/280/350, and Syncrowave 250 DX/350 LX.
50 mm Dinse-style for one-piece air-cooled
torch.
Part No. 195378.
Wire Feeder Accessories
8-CONDUCTOR EXTENSION 11-CONDUCTOR
EXTENSION CABLES (14CABLES (14-PIN)
For XR-Controls, SuitCase 12RC feeder, 20
PIN)
Series feeders, and 70 Series (S/D/DX model)
feeders. For 14-pin remote controls/24 VAC
wire feeders. 14-pin plug to a 14-pin socket.
(Not for 115-volt XR or 50 Series feeders.)
Part No. 242208025, 25 ft. (7.6 m).
Part No. 242208050, 50 ft. (15 m).
Part No. 242208080, 80 ft. (24.4 m).
For XR-AlumaFeed, MPa Plus feeders, and
60M feeders. 11-conductors to support
contactor control and remote voltage control on
all Miller® electronic CV 14-pin power sources.
Additional functions supported when using
the Invision MPa or XMT MPa power sources
include synergic Pulsed MIG, remote process
select and side select capabilities.
Part No. 247831025, 25 ft. (7.6 m).
Part No. 247831050, 50 ft. (15 m).
Part No. 247831080, 80 ft. (24.4 m).
14-CONDUCTOR
EXTENSION CABLES (14PIN)
SGA 100 SPOOL GUN
CONTROLS & KIT
SGA 100C SPOOL GUN
CONTROLS & KIT
WC-115A WELD CONTROL
SGA with contactor required to connect
Spoolmate 3035 spool gun to CV engine drives
like the Miller Bobcat. Includes 10 ft. (3 m) 115
VAC power cable and plug, 6 ft. (1.8 m) interconnecting cable, and 5 ft. (1.5 m) gas hose.
Part No. 043857.
Operates on 115 VAC, and designed primarily for constant current DC power sources. Can also
be used with constant voltage power sources or DC engine drives supplying 115 VAC. Used
with a CC source, the control circuit functions in a voltage-sensing mode and with a CV source, it
functions as a constant-speed circuit. Includes wire run-in and drive motor acceleration controls
which ensure optimum arc starting performance.
Part No. 137546, Without contactor.
Part No. 137546-01-1, With contactor.
WC-24 WELD CONTROL
TURNTABLE ASSEMBLY
WIRE STRAIGHTENER
Required to connect Spoolmate 3035 spool
gun to any Millermatic 141, 190, or 211. Also
allows connection to virtually any similar MIG
welder — Miller or other brands. Includes 10
ft. (3 m) 115 VAC power cable and plug, 6 ft.
(1.8 m) interconnecting cable, and 5 ft. (1.5
m) gas hose.
Part No. 043856.
For Spoolmate 200 and Spoolmatic/Spoolmatic Pro. Easily mounts on power source.
Designed for use with Miller CV power sources
with 14-pin receptacles and supplying 24 VAC.
Part No. 137549.
Allows feeder to rotate as operator changes
work position. Reduces strain and bending of
gun cable.
Part No. 146236.
For HDC and WC-115 weld controls, XRControls prior to serial number KK309906, and
50 Series feeders. Fully-loaded 14-pin extension cables for remote controls, and 24-volt
and 115-volt feeders.
Part No. 242205025, 25 ft. (7.6 m).
Part No. 242205050, 50 ft. (15 m).
For 20 Series and 70 Series.
Part No. 141580, For .035 –.045” (0.9 –1.1
mm) wire.
Part No. 141581, For 1/16–1/8” (1.6 – 3.2
mm) wire.
SPOOL ADAPTER
For use with 14-pound (6.4 kg) spool of Hobart
or Lincoln self-shielding wire.
Part No. 047141.
MILLER®
MLR/2784
Drive Rolls, Tongs, & Tips
DRIVE ROLL KITS
Base selection of drive rolls upon the following recommended usages:
1. V-Grooved rolls for hard wire.
2. U-Grooved rolls for soft and soft shelled cored wires.
3. U-Cogged rolls for extremely soft shelled wires.
4. V-Knurled rolls for hard shelled cored wires.
5. Drive roll types may be mixed to suit particular requirement (example: V-Knurled roll in combination with U-Grooved).
Millermatic® 200/210/212/250/251/252/DVI™s /Pulser/Vintage (2 Drive Roll)
22/32/52 Series, SuitCase™ 8/12RC & 8/12VS, Drive Rolls Reach Feeders (2 Drive Roll)
Part No.
087131
079594
204579*
190300*
079595
079596
079597
079598 044749
079599 079601 079606
079607
238687*
079608
079609 089984
079610 079611 083318
079614 Type
V-Grooved
V-Grooved
V-Grooved
V-Grooved
V-Grooved
V-Grooved
V-Grooved
V-Grooved
U-Grooved
U-Grooved U-Grooved V-Knurled
V-Knurled
VK-Grooved
V-Knurled
V-Knurled V-Knurled
V-Knurled V-Knurled U-Cogged
U-Cogged Fraction
Decimal
Metric
.023 – .025”
.023 – .025”
0.6 mm
.030”
.030”
0.8 mm
.030 and .035” .030 and .035” 0.8 and 0.9 mm
.035 and .045” .035 and .045” 0.9 and 1.22 mm
.035”
.035”
0.9 mm
.045”
.045”
1.2 mm
.052”
.052”
1.3 mm
1/16”
.062”
1.6 mm
.035”
.035”
0.9 mm
3/64”
.047”
1.2 mm
1/16”
.062”
1.6 mm
.035”
.035”
0.9 mm
.045”
.045”
1.2 mm
.045 and 1/16” .045 and 1/16” 1.22 and 1.6 mm
.052”
.052”
1.3 mm
1/16”
.062”
1.6 mm
.068 – .072”
.068 – .072”
1.8 mm
5/64”
.079”
2.0 mm
3/32”
.094”
2.4 mm
.045”
.045”
1.2 mm
1/16”
.062”
1.6 mm
*Dual-size reversible drive roll
22/24 Series & SuitCase Feeders Nylon Wire Guides (For Feeding Aluminum Wire)
Part No. 151203, .047” (1.2 mm) Wire Diameter.
Part No. 151205, 1/16” (1.6 mm) Wire Diameter.
Part No. 194264, 3/32” (2.4 mm) Wire Diameter.
Millermatic® 300/350/350P with Meters (4 Drive Roll)
54 Series, 24A Drive Rolls & R-115 Feeders (4 Drive Roll)
Part No.
087132
046780
046781
227061*
046782 046783
046784 044750
046785 046787 046792
046793 046794
046795 046796 046797 Type
V-Grooved
V-Grooved
V-Grooved
V-Grooved
V-Grooved V-Grooved
V-Grooved U-Grooved
V-Knurled V-Knurled
V-Knurled V-Knurled V-Knurled Fraction
Decimal
Metric
.023 – .025”
.030”
.035”
.035 and 3/64”
3/64”
.052”
1/16”
.035”
3/64”
1/16”
.035”
3/64”
.052”
1/16”
5/64”
3/32”
.023 – .025”
.030”
.035”
.035/.045”
.045”
.052”
.062”
.035”
.047”
.062”
.035”
.045”
.052”
.062”
.079”
.094”
0.6 mm
0.8 mm
0.9 mm
0.9/1.2 mm
1.2 mm
1.3 mm
1.6 mm
0.9 mm
1.2 mm
1.6 mm
0.9 mm
1.2 mm
1.3 mm
1.6 mm
2.0 mm
2.4 mm
62 series feeders, Pipe Pro 12 RC (2 roll kits), 64, 74 series feeder, Pipe Pro Single, Pipe Pro
Single DX, Pipe Pro Dual DX, Pipe Worx 400 and all Axcess Feeders (4 roll kit)
2 Roll Kit
Part No.
151030 —
151032 190300* —
151033 151034 —
151044 —
151045 —
151047 —
151061 151062 —
151064 151065 151066 151067 —
—
—
—
4 Roll Kit
Part No.
Type
Fraction
Decimal
Metric
151024
151025
151026
209533*
161190
151027 151028
151029
151036
244293
151037 243234
151039 151041
151052
151053 151054
151055 151056
151057 151058
151059
151060
151070
151072
V-Grooved
V-Grooved
V-Grooved
V-Grooved
V-Grooved
V-Grooved V-Grooved
V-Grooved U-Grooved
U-Grooved
U-Grooved U-Grooved
V-Knurled V-Knurled
V-Knurled V-Knurled
V-Knurled V-Knurled
V-Knurled V-Knurled U-Cogged U-Cogged .023 – .025” .030” .035” .035 and 3/64” .040” 3/64” .052”
1/16” .035” .035 and 3/64” 3/64”
.047” 1/16” 3/32”
.035” 3/64” .052” 1/16” .068 – .072”
5/64” 3/32” 7/64” 1/8” 3/64”
1/16” .023 – .025” .030” .035” .035/.045” .040” .045” .052” .062” .035” .035/.045” .045” .047” .062” .094” .035”
.045” .052” .062” .068 – .072” .079” .094” .110” .126” .045” .062” 0.6 mm
0.8 mm
0.9 mm
0.9/1.2 mm
1.0 mm
1.2 mm
1.3 mm
1.6 mm
0.9 mm
1.9/1.2 mm
1.2 mm
1.2 mm
1.6 mm
2.4 mm
0.9 mm
1.2 mm
1.3 mm
1.6 mm
1.8 mm
2.0 mm
2.4 mm
2.8 mm
3.2 mm
1.2 mm
1.6 mm
MSW & LMSW SERIES TONGS & TIPS
Standard
Part No. 040197, 6” (152 mm) Tong.
Part No. 040198, 12” (305 mm) Tong.
Part No. 040199, 18” (457 mm) Tong.
Part No. 040211, Standard Tip.
Part No. 040212, Flat Tip.
MO Offset
Part No. 040200, 6” (152 mm) Tong.
Part No. 040201, 12” (305 mm) Tong.
Part No. 040202, 18” (457 mm) Tong.
TT-6
Part No. 040203, 12” (305 mm) Tong.
Part No. 040204, 18” (457 mm) Tong.
TT-9
Part No. 040205, 12” (305 mm) Tong.
Part No. 040206, 18” (457 mm) Tong.
Part No. 040212, Flat Tips.
G-7 8” (203 mm)
Part No. 040207, 8” (203 mm) Tong.
FF 8” (203 mm)
Part No. 040208, 8” (203 mm) Tong.
FH 5” (127 mm)
Part No. 040209, 5” (127 mm) Tong.
MILLER®
MLR/2784
Welding Electrical Accessories
CAM-LOK TWISTLOCK RECEPTACLES/CONNECTORS
Part No.
039628 039638 056271 039633
039629 039630 039639 Description
Colour
Receptacle, Insul. (Female) Receptacle, Insul. (Female)
Receptacle, Uninsul. (Male) Connector, Insul. Set Scr. (In-Line Female)
Connector, Insul. Set Scr. (Male) Connector, Insul. Set Scr. (Male) Connector, Insul. Set Scr. (Male) Cable Capacity
Black Black Black Red No. 2/0 – 3/0 (25 – 70 mm)
No. 3/0 – 4/0 (70 – 95 mm)
—
No. 1/0 – 3/0 (50 – 70 mm)
Red Red Red No. 2 – 1/0 (35 – 50 mm)
No. 1/0 – 3/0 (50 – 70 mm)
No. 3/0 – 4/0 (70 – 95 mm)
MILLER RECEPTACLES/CONNECTORS
Part No.
039801 039800 057608 039901 039608 039878 039611 Description
Colour
Receptacle, Insulated (Female) Receptacle, Insulated (Female) Receptacle, Insulated (Female) Plug, Insulated (Male) Plug, Insulated (Male) Plug, Insulated (Male) Connector, Insulated (Female)
Black Red Yellow Black Red Yellow Black Cable Capacity
—
—
—
No. 1 – 4
No. 1 – 4
No. 1 – 4
No. 1 – 4
Receptacle, Brass with O-ring (Female) Receptacle, Brass (Female)
O-Ring, 0.296 ID x 0.139 H Silicone
O-Ring, 0.739 ID x 0.070 H
Insulator, bulkhead front
O-Ring, 0.989 ID x 0.070 H
Insulator, bulkhead rear
Washer, domed load
.812 ID x 1.450 OD x .070 THK
Tooth washer, 1 mm intern
Nut, M20-1.5 1.00 Hex .19 H BRS locking
Screw, M10-1.5x 20 Hex HD-PLN 8.8
PLD SEMS
218677
•
•
—
—
•
•
218678
SPECTRUM CONNECTORS
Receptacle Assembly (Female)
Part No.
Part No.
Part No.
Part No.
208967
202813
129525
186092
•
—
—
•
•
•
•
•
•
—
-
•
•
•
—
•
•
•
•
•
•
•
—
•
•
•
•
•
—
—
•
—
•
•
—
Part No. 209219, Receptacle Assembly (Female). Includes
Receptacle (Brass ((Female)), Insulator (bulkhead front),
Insulator (bulkhead rear), Washer, and Nut.
Part No. 218183, Receptacle Assembly (Female). Includes
Receptacle (Brass ((Female)), (2) O-Rings, Insulator (bulkhead
front), Insulator (bulkhead rear), Tooth washer, and Nut.
Part No. 191981, Connector, Insulated (Male), No. 4 – 1/0 - 2/0
(25 – 50 mm).
Part No. 218677, Connector, Insulated (Female), No. 4 – 1/0 2/0 (25 – 50 mm).
Part No. 218678, Adapter, Threaded Stud to Tweco (stud hole
dia. 5/8”)
191981
Dinse™ TWISTLOCK RECEPTACLES (50/70 SERIES)
Features
TWECO-STYLE TWISTLOCK
RECEPTACLES/CONNECTORS
Connector, TW LK Insulated Male (Tweco-Lenco Type) SK
10-25
Part No. 263801.
MAXSTAR 700/DYNASTY 700
CONNECTORS
Part No. 225029, Connection Kit, Thread Lock Double Dry
Adapters.
Part No. 225028, Adapter, Torch-Thread Lock Water (7/8 LHT).
•
•
—
Dinse™ TWISTLOCK RECEPTACLES/CONNECTORS
Part No.
Series
127837
25
143419
50
127835
25
129526
50
136600
70
138180
95
127836
25
129527
50
134460
70
241354
95
194722
50
194723
50
232728
50/70
Description
Cable Capacity/Thread Size
Receptacle, Insulated (Female)
—
Receptacle, Insulated (Male)
—
Connector, Insulated (Female)
No. 3 – No. 4
No. 2 – 1/0 (35 – 50 mm)
No. 1/0 – 3/0 (50 – 70 mm)
No. 3/0 – 4/0 (70 – 95 mm)
Connector, Insulated (Male)
No. 3 – No. 4
No. 2 – 1/0 (35 – 50 mm)
No. 1/0 – 3/0 (50 – 70 mm)
No. 3/0 – 4/0 (70 – 95 mm)
3/8-24R
Flow-Thru 125/150 A
7/8-14R
Flow-Thru 200 A
Adapter, Threaded Stud to Dinse (stud hole dia. 1/2”)
TWECO®-STYLE CONNECTOR
For Invision 352 MPa, AlumaFeed System, XMT 304/350, CST
280, Maxstars, Dynastys, and Syncrowaves. Accepts #1/0 to
#2/0 AWG cable. Kit includes one Tweco-style male plug which
attaches to the work and/or weld cables and plugs into the
Tweco-style receptacles on the power source.
Part No. 191981.
DINSE-STYLE CONNECTOR KITS
280, Maxstars, Dynastys, and Syncrowaves. Kits include one
male Dinse-style plug which attaches to the work and/or weld
cables and plugs into the Dinse-style receptacles on the power
source.
Part No. 042418, Accepts #4 to #1/0 AWG cable.
Part No. 042533, Accepts #1/0 to #2/0 AWG cable.
EXTENSIONS FOR DINSE-STYLE
CABLE CONNECTORS
280, Maxstars, Dynastys, and Syncrowaves. Used to adapt or
extend weld and/or work cables. Accepts #1/0 to #2/0 AWG
cable.
Part No. 134460, Male Dinse-style plug.
Part No. 136600, Female Dinse-style receptacle.
MILLER®
MLR/2784
Welding Electrical Accessories
EXTENSION KITS FOR DINSE-STYLE
CABLE CONNECTORS
280, Maxstars, Dynastys, and Syncrowaves. Used to adapt or
extend weld and/or work cables. Kit includes one male Dinsestyle plug and one in-line female Dinse-style receptacle.
Part No. 042419, Accepts #4 to #1/0 AWG cable.
DINSE ADAPTERS
For Invision 352 MPa, AlumaFeed System, XMT 304/350,
CST 280, Maxstars, Dynastys, and Syncrowaves. One-piece
adapter with Dinse-style male plug (to power source) on one
end and Tweco or Cam-Lok female receptacle (for weld cable
connection) on other end.
Part No. 042465, Dinse/Tweco®Adapter.
Part No. 042466, Dinse/Cam-Lok Adapter.
TWECO®/DINSE ADAPTER
For Invision 352 MPa, AlumaFeed System, XMT 304/350,
CST 280, Maxstars, Dynastys, and Syncrowaves. One-piece
adapter with Tweco-style male plug (to power source) on one
end and Dinse-style female receptacle (for weld cable connection) on other end.
Part No. 210061.
PROFESSIONAL SERIES ELECTRODE HOLDERS
PA532, PA316, PA732
•Ergonomic — High lever design for greater grip and hand clearance •Lightweight and easy-to-use •Fully insulated, high-strength springs for excellent gripping power •Heavy-duty, shock-proof nylon handle •Grooved
jaw design insures firm electrode grip •High-impact, high-temperature fiberglass tip insulators •Professional
series features high copper alloy tongs, utility series features brass tongs •Holders supplied with allen
wrench and cable connections ferrule assuring efficient connections
Part No.
PA532
PA316
PA732
PA14HD
PA14HD
Amperage
Capacity
200
250
300
400
Electrode
Capacity
5/32” (4.0 mm)
3/16” (4.8 mm)
7/32” (5.6 mm)
1/4” (6.4 mm)
Cable
Length
Capacity
No. 2/0 (70 mm) 8-1/2” (215 mm)
No. 2/0 (70 mm) 9-1/4” (235 mm)
No. 2/0 (70 mm)
10” (250 mm)
No. 4/0 (105 mm) 11” (280 mm)
Weight
15 oz (415 g)
16 oz (450 g)
19 oz (530 g)
23 oz (650 g)
WORK CLAMPS
EG500
PGC200
EG Series — Steel Work Clamps
•Zinc plated •Large hex screw cable connection assures safe cable connection every time •Pure copper
braided shunts on #EG500 allows both jaws to carry welding current
PGC Series — Copper Alloy
•Contoured handle lever for easy jaw opening •Strong gripping power •Large contact area assures positive
grounding •Fully insulated spring •Conductor body holds the cable securely •Large hex screw cable connection assures safe cable connection every time
MGC Series — Magnetic Work Clamps
•Large contact area assures excellent electrical contact •Strong gripping power •Grounding concealed to
prevent dislodgment •Insulated to prevent annealing •Easy installation or removal •Most popular magnetic
work clamps in the market
Electrode
Cable
Part No. Amperage
Length
Weight
Capacity
Capacity
Capacity
EG200
200
1-1/2” (40 mm)
No. 6–4 (10–16 mm)
7” (175 mm) 7 oz (199 g)
EG300
300
2” (50 mm)
No. 2–1 (25–35 mm)
8” (200 mm) 14 oz (390 g)
EG500
500
2” (50 mm)
No. 1/0–4/0 (50–105 mm) 10” (245 mm) 17 oz (490 g)
PGC200
200
1” (25 mm)
No. 1–1/0 (35–50 mm) 6” (150 mm) 16 oz (445 g)
213619
300
2” (50 mm)
1/0 (50 mm)
8” (200 mm) 13 oz (368 g)
240697
200
2” (50 mm)
No. 6
6-1/4”
6 oz (168 g)
POWER TERMINALS
Part No.
219515 219516 213380 219535 119172 254140 Description
50 amp, 230 volt pin-type wall receptacle 50 amp, 230 volt pin-type male plug 50 amp, 230 volt pin-type male plug (heavy-duty) 50 amp, 230 volt pin-type cord-mount receptacle
50 amp, 125/250 volt pin-type male plug Plug, str grd 3P4W 3PH 50A 240V 15-50P Cord Range
(Min. – Max.)
—
0 – 1.00
0.625 – 1.320
0.425 – 1.31
0.62 – 1.31
—
POWER TERMINAL
RUBBER BOOTS
Part No. 179848, Positive.
Part No. 180732, Negative.
HOBART®
HOB/2455
Mild Steel Electrodes
Pipemaster® Pro-60
AWS E6010
Pipemaster Pro-60 is a quick-starting, cellulosic mild steel electrode that provides you with
out-standing arc stability, penetration and wash-in. It’s ideal for welding in all positions and
produces an X-ray quality weld with light slag that’s easy to remove. Pipemaster Pro-60 can
be used to weld the following API 5L steels: Grade A, B, X-42, X-46, X-52, X-56 and for the root
pass on material up to X-80. It features enhanced weldabilty and increased physical properties.
Earthtone grey coating.
Typical Applications: •Construction and shipbuilding •General-purpose fabrication •Maintenance welding •Out-of-position X-ray welds •Pipe welding •Vertical and overhead plate welding
Typical Mechanical Properties (AW):
Tensile Strength (psi): 79,000 (542 MPa)
Yield Strength (psi): 66,000 (456 MPa)
Elongation % in 2” (50 mm): 23%
Approvals and Conformances: •AWS A5.1, E6010 •ASME SFA 5.1, E6010 •Lloyd’s Grade
3m •En 499, E383C21 •ABS E6010
Part No.
Diameter
S129132-035 3/32” (2.4 mm)
S129144-035 1/8” (3.2 mm)
S129151-035 5/32” (4.0 mm)
Recommended
Operating Ranges
Package Size
40 - 70 amps 65 - 130 amps
90 - 175 amps
50 lb (22.7 kg) Sealed Can
Hobart® 610
AWS E6010
Hobart 610 is a mild steel cellulose electrode that gives outstanding arc stability, consistent arc
control, quick starts and restarts with low spatter. Its excellent bead wash, penetration and tie-in,
plus the all-positional capability, make it a preferred electrode for pipe welding applications or
fabrication jobs.
Typical Applications: •Pipe welding •Construction and shipbuilding •General purpose fabrication •Maintenance applications
Approvals and Conformances: •AWS A5.1, E6010 •CWB E4310 •ASME SFA 5.1, F3, A1,
E6010
Part No.
Diameter
Recommended
Operating Ranges
Package Size
S129432-033 S129432-035 S129432-045 S129432-089 S129444-033 S129444-035 S129444-045 S129444-089 S129451-033 S129451-035 S129451-045 S129451-089
3/32” (2.4 mm)
3/32” (2.4 mm)
3/32” (2.4 mm)
3/32” (2.4 mm)
1/8” (3.2 mm)
1/8” (3.2 mm)
1/8” (3.2 mm)
1/8” (3.2 mm)
5/32” (4.0 mm)
5/32” (4.0 mm)
5/32” (4.0 mm) 5/32” (4.0 mm)
40 - 70 amps
40 - 70 amps
40 - 70 amps
40 - 70 amps
80 - 120 amps
80 - 120 amps
80 - 120 amps
80 - 120 amps
100 - 160 amps
100 - 160 amps
100 - 160 amps
100 - 160 amps
5 lb (2 kg) Plastic Pak
10 lb (4.5 kg) Plastic Pak
Hobart® 335A
AWS E6011
The Hobart 335A offers a fine spray transfer that enhances operator appeal in all positions.
Designed for use with AC power sources, this all-position, cellulose-based electrode provides
stable arc characteristics and good penetration.
Typical Applications: •Galvanized steel work •General-purpose fabrication •Railcar •Shipbuilding •Structural work
Approvals and Conformances: •AWS A5.1, E6011 •ASME SFA 5.1 •Lloyd’s 2m, 2Ym •CWBE4311 •ABS E6011
Pipemaster® 60
AWS E6010
Use Pipemaster 60 for quick starting, excellent arc stability, superior arc drive (penetration),
light slag and excellent wash-in. An all-position cellulosic mild steel electrode, it outdoes itself in
producing X-ray quality welds. Earthtone grey coating.
Typical Applications: •Construction and shipbuilding •General-purpose fabrication •Maintenance welding •Out-of-position X-ray welds •Pipe welding •Vertical and overhead plate welding
Approvals and Conformances: •AWS A5.1, E6010 •ASME SFA 5.1, E6010 •Lloyd’s Grade
3m •ABS E6010
Part No.
Diameter
Recommended
Operating Ranges
Package Size
S116532-035
S116532-045
S116532-089
S116544-035
S116544-045
S116544-089
S116551-035
S116551-045
S116551-089
S116558-035
3/32” (2.4 mm)
3/32” (2.4 mm)
3/32” (2.4 mm)
1/8” (3.2 mm)
1/8” (3.2 mm)
1/8” (3.2 mm)
5/32” (4.0 mm)
5/32” (4.0 mm)
5/32” (4.0 mm)
3/16” (4.8 mm)
40 - 70 amps
40 - 70 amps
40 - 70 amps
65 - 130 amps
65 - 130 amps
65 - 130 amps
90 - 175 amps
90 - 175 amps
90 - 175 amps
140 - 225 amps
Pipemaster® 70
AWS E7010-P1
The Pipemaster 70, an all-position cellulosic mild steel electrode, is excellent for producing X-ray
quality welds. It’s quick starting with excellent arc stability, superior penetration, light slag and
excellent wash-in. Pipemaster 70 can also help you handle vertical-down welding on all passes
on 5L, 5LX and X52 through X65 pipe.
Typical Applications: •Welding of high-yield pipe steels •Pipeline welding using downhill travel
•Shipbuilding •Storage tanks •Drill platforms
Approvals and Conformances: •AWS A5.5, E7010-P1 •ASME SFA 5.5, E7010-P1 •Lloyd’s
Grade 3m, 3Ym •ABS E7010-P1
Part No.
Diameter
Recommended
Operating Ranges
S116644-035 1/8” (3.2 mm) S116651-035 5/32” (4.0 mm) S116658-035 3/16” (4.8 mm)
Package Size
70 - 140 amps 50 lb (22.7 kg) Sealed Can
Part No.
Diameter
Recommended
Operating Ranges
Package Size
S112232-031 S112232-045
S112232-089 S112244-031 S112244-035 S112244-045 S112244-089 S112251-031 S112251-035 S112251-045 S112251-089 S112258-031 S112258-035 3/32” (2.4 mm)
3/32” (2.4 mm)
3/32” (2.4 mm)
1/8” (3.2 mm)
1/8” (3.2 mm)
1/8” (3.2 mm)
1/8” (3.2 mm)
5/32” (4.0 mm)
5/32” (4.0 mm)
5/32” (4.0 mm)
5/32” (4.0 mm)
3/16” (4.8 mm)
3/16” (4.8 mm) 60 - 90 amps
60 - 90 amps
60 - 90 amps
80 - 125 amps
80 - 125 amps
80 - 125 amps
80 - 125 amps
130 - 160 amps
130 - 160 amps
130 - 160 amps
130 - 160 amps
160 - 190 amps
160 - 190 amps
50 lb (22.7 kg) Carton
HOBART®
HOB/2455
Hobart® 335C
AWS E6011
The versatile soft-arc electrode Hobart 335C is designed for AC power sources, but it can also
be used on DCEP or DCEN. With the ability to weld through paint, mill scale or rust, it is an allposition cellulosic electrode with the ultimate operator appeal.
Typical Applications: •General construction •Light sheet metal fabrication •Maintenance and
repair welding •Shipbuilding •Welding on galvanized steels •Welding through paint, mill scale
or rust
Approvals and Conformances: •AWS A5.1, E6011 •ASME SFA 5.1 •Lloyd’s 2m, 2Ym •ABS
E6011
Part No.
Diameter
S113532-031 3/32” (2.4 mm)
S113544-031 1/8” (3.2 mm)
S113551-031 5/32” (4.0 mm) Recommended
Operating Ranges
Package Size
60 - 90 amps 50 lb (22.7 kg) Carton
80 - 125 amps 50 lb (22.7 kg) Carton
130 - 160 amps 50 lb (22.7 kg) Carton
Hobart® 447C
AWS E6013
A soft arc AWS 6013 electrode, Hobart 447C is the best way to take control of poor fit-up conditions. It has fast-freeze characteristics, giving it preferred operator appeal. Hobart 447C versatility extends its usage with AC or DC power sources and low open-circuit voltage AC machines.
Typical Applications: •General-purpose fabrication •Machine parts •Metal buildings and
structures •Shaft buildup
Approvals and Conformances: •AWS A5.1, E6013 •ASME SFA 5.1 •CWB E4313 •ABS
E6013
Part No.
S117132-031 S117132-089 S117144-031 S117144-089 S117151-031 S117151-089
Diameter
Recommended
Operating Ranges
3/32” (2.4 mm)
40 - 80 amps
3/32” (2.4 mm)
40 - 80 amps
1/8” (3.2 mm)
70 - 120 amps
1/8” (3.2 mm)
70 - 120 amps
5/32” (4.0 mm) 130 - 160 amps
5/32” (4.0 mm) 130 - 160 amps
Package Size
Hobart® 447A
AWS E6013
Fast freeze characteristics make this the perfect choice for welding applications that have poor
fit-up conditions. Produces a very stable arc with good weld bead appearance. Excellent choice
for sheet metal welding.
Typical Applications: •General-purpose fabrication •Machine parts •Metal buildings and
structures •Shaft buildup
Approvals and Conformances: •AWS A5.1, E6013 •ASME SFA 5.1 •ABS E6013
Part No.
Diameter
Recommended
Operating Ranges
S113832-031 S113832-045 S113832-089 S113844-031 S113844-045 S113844-089 S113851-031 S113851-045 S113851-089 S113858-031 3/32” (2.4 mm) 3/32” (2.4 mm) 3/32” (2.4 mm)
1/8” (3.2 mm)
1/8” (3.2 mm)
1/8” (3.2 mm)
5/32” (4.0 mm)
5/32” (4.0 mm)
5/32” (4.0 mm)
3/16” (4.8 mm)
40 - 80 amps
40 - 80 amps
40 - 80 amps
70 - 120 amps
70 - 120 amps
70 - 120 amps
130 - 160 amps
130 - 160 amps
130 - 160 amps
140 - 220 amps
Package Size
Hobart® 14A
AWS E7014
When you are tackling jobs where higher deposition and speed of travel are needed, the Hobart
14A is the electrode to choose. An all-position electrode, Hobart 14A is equipped with a rutile
base and iron powder addition to increase deposition rates and give operator appeal. This
electrode offers outstanding slag removal and bead appearance and can be operated with AC,
DCEP or DCEN power.
Typical Applications: •Frames •Heavy sheet metal •Machine bases
Approvals and Conformances: •AWS A5.1, E7014 •ASME SFA 5.1, E7014 •CWB E4914
•ABS E7014
Part No.
Diameter
Recommended
Operating Ranges
S114232-031 S114232-045 S114232-089
S114244-031 S114244-045 S114244-089 S114251-031 S114251-045 S114251-089 S114258-031 3/32” (2.4 mm) 3/32” (2.4 mm) 3/32” (2.4 mm) 1/8” (3.2 mm) 1/8” (3.2 mm) 1/8” (3.2 mm) 5/32” (4.0 mm) 5/32” (4.0 mm) 5/32” (4.0 mm) 3/16” (4.8 mm) 70 - 90 amps
70 - 90 amps
70 - 90 amps
120 - 145 amps
120 - 145 amps
120 - 145 amps
140 - 210 amps
140 - 210 amps
140 - 210 amps
180 - 280 amps
Package Size
Hobart® Rocket® 7024
AWS E7024
The Rocket 7024 is engineered with outstanding ”best in class” features including, complete slag
removal, extremely low spatter and super smooth soft arc. This E7024 electrode is more forgiving than anything else on the market when it comes to welding material that is moderately rusty
or not as clean as it should be. It is also exceptionally fast when used down hand in properly
designed weld joints or in horizontal fillet welds and can be used in both single or multipass
applications.
Typical Applications: •Plate fabrication •Tank fabrication •Barge construction •Construction
and earthmoving equipment
Approvals and Conformances: •AWS A5.1, E7024 •ASME SFA 5.1, E7024 •ABS E7024
Part No.
Diameter
Recommended
Operating Ranges
S112944-031 S112951-031 S112959-031 S112970-031 S112981-031 1/8” (3.2 mm)
5/32” (4.0 mm)
3/16” (4.8 mm)
7/32” (5.6 mm)
1/4” (6.4 mm)
130 - 170 amps
180 - 245 amps
200 - 300 amps
250 - 340 amps
300 - 380 amps
Package Size
HOBART®
HOB/2455
Hobart® 418
AWS E7018 H4R/E7018-1 H4R
Hobart 418 gives you all the flexibility you need in a general-purpose, low-hydrogen, mild steel
electrode. It also has good out-of-position welding capabilities and provides an X-ray quality
deposit. This unique electrode is ideal for tacking prior to finish welding with Fabshield selfshielded, tubular wire, because the construction of the Hobart 418 allows removal of all the slag
from the self-shielded wire.
Typical Applications: •Field erections, steel structures •Jobs where low-hydrogen weld metal
in the tensile strength range of 70,000 psi is required •Low alloy structurals •Low-, medium- and
high-carbon steels •Offshore rigs, power plants
Approvals and Conformances: •AWS A5.1, E7018 H4R, E7018-1 H4R •ASME SFA 5.1,
E7018 •ABS 3H5, 3Y •Lloyd’s BF3.3YH5 •CWB E4918-1 H4
Part No.
Diameter
S119932-033 3/32” (2.4 mm)
S119932-035 3/32” (2.4 mm)
S119932-045 3/32” (2.4 mm)
S119932-089 3/32” (2.4 mm)
S119944-033 1/8” (3.2 mm)
S119944-035 1/8” (3.2 mm)
S119944-045 1/8” (3.2 mm)
S119944-089 1/8” (3.2 mm)
S119951-033 5/32” (4.0 mm) S119951-035 5/32” (4.0 mm)
S119951-045 5/32” (4.0 mm)
S119951-089 5/32” (4.0 mm)
S119958-035 3/16” (4.8 mm)
S119970-035 7/32” (5.6 mm)
S119981-035 1/4” (6.4 mm)
Recommended
Operating Ranges
80 - 100 amps
80 - 100 amps
80 - 100 amps
80 - 100 amps
90 - 150 amps
90 - 150 amps
90 - 150 amps
90 - 150 amps
110 - 230 amps
110 - 230 amps
110 - 230 amps
110 - 230 amps
150 - 300 amps
220 - 350 amps 270 - 380 amps
Package Size
Hobart® 18AC
AWS E7018 H8
Highly recommended for applications using small 208/230V, single phase AC welders, 18AC has
good operator appeal, excellent re-striking characteristics and an extremely stable arc. 18AC is
also an excellent choice for skip or tack welds. The slag is self-removing in most applications.
18AC will work well on all AC power sources and performs exceptionally well on utility-type
welders.
Typical Applications: •Low, medium and high-carbon steels •Skip or tack welds •Shops,
farms, hobbyist •Some high-strength low alloy steels
Approvals and Conformances: •AWS A5.1, E7018 H8 •ASME SFA 5.1, E7018
Part No.
Diameter
Recommended
Operating Ranges
S119832-035 S119832-045 S119832-089 S119844-035 S119844-045 S119844-089 S119851-035 S119851-045 S119851-089 3/32” (2.4 mm)
3/32” (2.4 mm)
3/32” (2.4 mm)
1/8” (3.2 mm)
1/8” (3.2 mm)
1/8” (3.2 mm)
5/32” (4.0 mm)
5/32” (4.0 mm)
5/32” (4.0 mm)
70 - 110 amps
70 - 110 amps
70 - 110 amps
90 - 165 amps
90 - 165 amps
90 - 165 amps
125 - 220 amps
125 - 220 amps
125 - 220 amps
Package Size
Low Alloy Electrodes
Hoballoy® 10018D2
Hobart® 718MC
AWS E7018 H4R/E7018(M)-1 H4R
You can take control with the electrode that’s formulated and manufactured to give you excellent
moisture resistance, good out-of-position welding capabilities and an X-ray quality deposit. The
718MC meets the requirements of military spec. Mil-E-22200/10, including moisture absorption
limits of .10% max. as opened and .20% max. after 9 hrs. at 80°F and 80% relative humidity.
Typical Applications: •Barge offshore rigs, shipbuilding •Boiler code applications •Field erection, steel structures •Petrochemical plants, power plants •Railcar and locomotive construction
•Welding of enameling steels; free machining steels; low alloy structurals; and low, medium
or high carbon steels •Weldments in low-temperature environments where low-temperature
impacts are important
Approvals and Conformances: •AWS A5.1, E7018 H4R, E7018 -1H4R •ABS 3H5, 3Y •ASME
SFA 5.1, E7018 •MIL-E-22200/10
Part No.
Diameter
Recommended
Operating Ranges
Package Size
S115932-035 S115932-089 S115944-035 S115944-089 S115951-035 S115951-089 S115958-035 S115970-035 S115981-035 3/32” (2.4 mm)
3/32” (2.4 mm)
1/8” (3.2 mm)
1/8” (3.2 mm)
5/32” (4.0 mm) 5/32” (4.0 mm)
3/16” (4.8 mm)
7/32” (5.6 mm)
1/4” (6.4 mm)
70 - 110 amps
70 - 110 amps
90 - 165 amps
90 - 165 amps
125 - 220 amps
125 - 220 amps
160 - 300 amps
260 - 340 amps
270 - 380 amps
Hobart® 7018XLM
AWS E7018 H4R / E7018-1 H4R
A high deposition rate, iron powder electrode for use with either AC or DCEP. The 7018XLM is
known for its outstanding ease of welding in vertical or overhead positions. This electrode can
be used for mild steel and joining mild steel to low ally steels.
Typical Applications: •Field erections •Shipbuilding •Pipeline •Construction
Tensile Strength (psi): 77,000 (529MPa)
Yield Strength (psi): 64,000 (441MPa)
Approvals and Conformances: •AWS A5.1, E7018-1 H4R •ASME SFA 5.1, E7018-1 H4R
•ABS
Part No.
Diameter
Recommended
Operating Ranges
Package Size
S422032-031 S422032-033 S422032-035 S422044-031 S422044-033 S422044-035 S422051-031 S422051-033 S422051-035 S422058-031 S422058-033 S422058-035 S422070-035 S422081-035 3/32” (2.4 mm)
3/32” (2.4 mm) 3/32” (2.4 mm)
1/8” (3.2 mm) 1/8” (3.2 mm) 1/8” (3.2 mm) 5/32” (4.0 mm) 5/32” (4.0 mm) 5/32” (4.0 mm) 3/16” (4.8 mm) 3/16” (4.8 mm) 3/16” (4.8 mm) 7/32” (5.6 mm) 1/4” (6.4 mm)
70-110 amps
70-110 amps
70-110 amps
90-160 amps
90-160 amps
90-160 amps
110-230 amps
110-230 amps
110-230 amps
190-300 amps
190-300 amps
190-300 amps
240-340 amps
310-390 amps
AWS E10018-D2 H4R
A high-quality electrode, Hoballoy 10018D2 is designed for the welding of high tensile steels and manganesemolybdenum steels requiring tensile strengths of at least 100,000 psi. It has high operator appeal and offers
a wide variety of welding advantages including good arc characteristics, ductility, crack-resistance, easy slag
removal, and low spatter and smoke. Plus, Hoballoy 10018D2 is an ideal choice for conditions of high heat and
humidity because it features a special coating that’s designed to reduce moisture pick-up, which also helps to
minimize hydrogen cracking and starting porosity.
Typical Applications: •Manganese-moly castings •Alloy forgings •Structurals •Pressure vessel applications
in either the as welded or stress-relieved condition
Typical Mechanical Properties (stress relieve 1 hour @ 1150°F):
Approvals and Conformances: •AWS A5.5, E10018-D2 H4R •ASME SFA 5.5, E10018-D2 H4R
Part No.
Diameter
Recommended
Operating Ranges
Package Size
S125732-035 S125744-035 S125751-035 S125758-035 S125781-035 3/32” (2.4 mm) 1/8” (3.2 mm)
5/32” (4.0 mm)
3/16” (4.8 mm)
1/4” (6.4 mm)
70 - 110 amps
90 - 160 amps
130 - 220 amps
200 - 300 amps
300 - 400 amps
HOBART®
HOB/2455
Mild Steel Solid Wires
Part No.
Diameter
Package Size
S307608-011 0.035” (0.9 mm) 600 lb (272 kg) Robo-Pak
S307608-028 0.035” (0.9 mm) 60 lb (27 kg) Fiber Spool
S307608-033 0.035” (0.9 mm) 33 lb (15 kg) Steel Reel
S307608-045 0.035” (0.9 mm) 45 lb (20.4 kg) Steel Reel
S307608-070 0.035” (0.9 mm) 950 lb (431 kg) Robo-Pak
S307608-073 0.035” (0.9 mm) 300 lb (136 kg) Robo-Pak
S307608-074 0.035” (0.9 mm) 600 lb (272 kg) Robo-Pak
S307608-085 0.035” (0.9 mm) 45 lb (20.4 kg) Fiber Spool
S307612-011 0.045” (1.2 mm) 600 lb (272 kg) Robo-Pak
S307612-033 0.045” (1.2 mm) 33 lb (15 kg) Steel Reel
S307612-045 0.045” (1.2 mm) 45 lb (20.4 kg) Steel Reel
S307612-070 0.045” (1.2 mm) 950 lb (431 kg) Robo-Pak
S307612-074 0.045” (1.2 mm) 600 lb (272 kg) Robo-Pak
S307615-070 0.052” (1.4 mm) 950 lb (431 kg) Robo-Pak
S307618-013 1/16” (1.6 mm) 500 lb (227 kg) Robo-Pak
S307618-045 1/16” (1.6 mm) 45 lb (20.4 kg) Steel Reel
Quantum Arc™ 6
AWS ER70S-6
When the task demands excellent weldability for CO2 or Ar/CO2 mixtures and you have rusty,
scaly or oily plates, choose the mild steel electrode with deoxidizers powerful enough to handle
the job. Hobart Quantum Arc 6 is formulated to ensure sound, porosity-free welds over a wide
range of general shop fabrications.
Typical Applications: •Construction •Farm equipment •General shop work •Steel castings or
forging salvage •Shaft buildup •Tanks •Automotive
Approvals and Conformances: •AWS A5.18, ER70S-6 •ASME SFA A5.18, ER70S-6 •ABS
ER705-6 •CWB ER49S-6
Aluminium Electrodes
MaxalMig ER5356
•High strength •High ductility, fatigue strength and toughness •Very good color match after
anodizing with 5XXX/6XXX base materials
Typical Applications: •Applications using base metal 5086 •Truck frames •Shipbuilding
•Railcar •Bus panels
Approvals and Conformances: •AWS A5.10, ER5356 •ASME SFA 5.10, ER5356 •AWS
A5.01, Class S1, Schedule F •CWB •ABS •vdTUV •CE •DB
Part No.
Diameter
535603004 0.030” (0.8 mm) 1 lb (0.45 kg) Plastic Spool
535603012 0.030” (0.8 mm) 12 lb (5.4 kg) Wire Basket
535603508 0.035” (0.9 mm) 5 lb (2 kg) Plastic Spool
535603512P 0.035” (0.9 mm) 16 lb (7.3 kg) Wire Basket
535603523L 0.035” (0.9 mm) 100 lb (45 kg) Drum
535603523 0.035” (0.9 mm) 300 lb (136 kg) Drum
535604704 3/64” (1.2 mm) 1 lb (0.45 kg) Plastic Spool
535604712 3/64” (1.2 mm) 16 lb (7.3 kg) Wire Basket
535604712P 3/64” (1.2 mm) 16 lb (7.3 kg) Wire Basket
535604712P22 3/64” (1.2 mm) 22 lb (10 kg) Plastic Spool
535604723L 3/64” (1.2 mm) 100 lb (45 kg) Drum
535604723 3/64” (1.2 mm) 300 lb (136 kg) Drum
535606223L 1/16” (1.6 mm) 100 lb (45 kg) Drum
535606223 1/16” (1.6 mm) 300 lb (136 kg) Drum
535609412P 3/32” (2.4 mm) 16 lb (7.3 Kg) Wire Basket
Diameter
•Moderate strength (28ksi/190Mpa typical) •Low melting temperature and high fluidity •Minimizes hot cracking and distortion •Clean, bright welds
Typical Applications: •Sport products - scooters/bicycles •General repair and maintenance
•Automotive/motorcycle frames and wheels •Welding 6XXX alloys
Approvals and Conformances: •AWS A5.10, ER4043 •ASME SFA 5.10, ER4043
•AWS A5.01, Class S1, Schedule F •CWB •CE
Part No.
Package Size
Part No.
MaxalMig ER4043
Diameter
Package Size
404303523L 0.035” (0.9 mm) 100 lb (45 kg) Drum
404303523 0.035” (0.9 mm) 300 lb (136 kg) Drum
404304704 3/64” (1.2 mm) 1 lb (0.45 kg) Plastic Spool
404304712P22 3/64” (1.2 mm) 22 lb (10 kg) Plastic Spool
404304723L 3/64” (1.2 mm) 100 lb (45 kg) Drum
404304723 3/64” (1.2 mm) 300 lb (136 kg) Drum
404306223L 1/16” (1.6 mm) 100 lb (45 kg) Drum
404306223 1/16” (1.6 mm) 300 lb (136 kg) Drum
Package Size
494303504
0.035” (0.9 mm) 1 lb (0.45 kg) Plastic Spool
494303512
0.035” (0.9 mm) 16 lb (7.3 kg) Wire Basket
494303523L 0.035” (0.9 mm) 100 lb (45 kg) Drum
494303523
0.035” (0.9 mm) 300 lb (136 kg) Drum
494304704
3/64” (1.2 mm) 1 lb (0.45 kg) Plastic Spool
494304712
3/64” (1.2 mm) 16 lb (7.3 kg) Wire Basket
494304712P22 3/64” (1.2 mm) 22 lb (7.3 kg) Wire Basket
494304723L 3/64” (1.2 mm) 100 lb (45 kg) Drum
494304723
3/64” (1.2 mm) 300 lb (136 kg) Drum
494306212
1/16” (1.6 mm) 16 lb (7.3 kg) Wire Basket
494306223L 1/16” (1.6 mm) 100 lb (45 kg) Drum
494306223
1/16” (1.6 mm) 300 lb (136 kg) Drum
MaxalMig ER4943
• 25% higher UTS and 50% higher yield strength than 4043 in as-welded condition •Moderate to
high strength (35ksi/240mpa typical) •Low melting temperature and high fluidity •Heat treatable
Typical Applications: •Current 4043 and 4643 applications, 1XXX, 3XXX, 5XXX with less than
3.0% Mg (example 5052), and 6XXX •Post weld aged, post weld heatreat and age applications
•Automotive/motorcycle frames and wheels •Ladders and furniture
Approvals and Conformances: •AWS A5.10, ER4943 •ASME SFA 5.10,
ER4943 •AWS A5.01, Class S1, Schedule F •CWB •ABS •CE
HOBART®
HOB/2455
Aluminium Electrodes
MaxalTig R5356
•High strength •High ductility, fatigue strength and toughness •Very good color match after
anodizing with 5XXX/6XXX base materials
Typical Applications: •Applications using base metal 5086 •Truck frames •Shipbuilding
•Railcar •Bus panels
Approvals and Conformances: •AWS A5.10, R5356 •ASME SFA 5.10, R5356 •AWS A5.01,
Class S1, Schedule F •CWB •ABS •CE
Part No.
535606270 535606271 535609471 535609470 535612571 535612570 535615670 535618770 Diameter
Package Size
1/16” (1.6 mm) 10 lb (4.5 kg) Carton
1/16” (1.6 mm) 1 lb (0.45 kg) Tube
3/32” (2.4 mm) 1 lb (0.45 kg) Tube
3/32” (2.4 mm) 10 lb (4.5 kg) Carton
1/8” (3.2 mm) 1 lb (0.45 kg) Tube
1/8” (3.2 mm) 10 lb (4.5 kg) Carton
5/32” (4.0 mm) 10 lb (4.5 kg) Carton
3/16” (4.8 mm) 10 lb (4.5 kg) Carton
MaxalTig R4943
•25% higher UTS and 50% higher yield strength than 4043 in as-welded condition •Moderate to
high strength (35ksi/240Mpa typical) •Low melting temperature and high fluidity •Heat treatable
Typical Applications: •Current 4043 and 4643 applications, 1XXX, 3XXX, 5XXX with less than
3.0% Mg (example 5052), and 6XXX •Post weld aged, post weld heatreat & age applications
•Automotive/motorcycle frames and wheels •Ladders and furniture
A5.01, Class S1, Schedule F •CWB •ABS •CE
MaxalTig R4043
•Moderate strength (28ksi/190Mpa typical) •Low melting temperature and high fluidity •Minimizes hot cracking and distortion •Clean, bright welds
Typical Applications: •Sport products - scooters/bicycles •General repair and maintenance
•Automotive/motorcycle frames and wheels •Welding 6XXX alloys
A5.01, Class S1, Schedule F •CWB •CE
Part No.
404306270
404306271 404309471 404309470 404312571 404312570 404315670 404318770 Part No.
494306270 494309470 494312570 Diameter
Package Size
1/16” (1.6 mm) 10 lb (4.5 kg) Carton
1/16” (1.6 mm) 1 lb (0.45 kg) Tube
3/32” (2.4 mm) 1 lb (0.45 kg) Tube
3/32” (2.4 mm) 10 lb (4.5 kg) Carton
1/8” (3.2 mm) 1 lb (0.45 kg) Tube
1/8” (3.2 mm) 10 lb (4.5 kg) Carton
5/32” (4.0 mm) 10 lb (4.5 kg) Carton
3/16” (4.8 mm) 10 lb (4.5 kg) Carton
Diameter
Package Size
1/16” (1.6 mm) 10 Lb (4.5 Kg) Carton
3/32” (2.4 mm) 10 Lb (4.5 Kg) Carton
1/8” (3.2 mm) 10 Lb (4.5 Kg) Carton
Tubular Wires
FabCO® RXR - FLAT & HORIZONTAL
AWS E70T-1C, E70T-9C
•Outstanding welding performance results in excellent operator appeal •Smooth and stable arc
produces an easy to control puddle •Easy slag removal reduces cleanup time •Very flexible
amperage range promotes versatility
Typical Applications: •Storage vessels •Earthmoving equipment •Heavy fabrication •Railcar
Approvals and Conformances: •AWS A5.20, E70T-1C, E70T-9C •AWS A5.20M, E490T-1C,
E490T-9C •ASME SFA 5.20, E70T-1C, E70T-9C •ABS, 100% CO2, 2YSA H10 •CWB, 100%
CO2, E492T-9-H8 (1.2 mm - 2.4 mm diameter electrodes) •AWS D1.8/D1.8M, 100% CO2, 1/16”
(1.6 mm) & 3/32” (2.4 mm) diameter electrodes •EN17632-B: T55 2 T1 0 C A H10 •CE Marked
per CPR 305/2011 (1.2 mm - 2.4 mm diameter electrodes) •MIL-E-24403/1, MIL-70T-1C
Part No.
Diameter
Package Size
S246512-002 0.045” (1.2 mm) 60 lb (27 kg) Coil
S246512-029 0.045” (1.2 mm) 33 lb (15 kg) Spool
S246512-044 0.045” (1.2 mm) 44 lb (20 kg) Spool
S246519-002 1/16” (1.6 mm) 60 lb (27 kg) Coil
S246519-029 1/16” (1.6 mm) 33 lb (15 kg) Spool
S246519-044 1/16” (1.6 mm) 44 lb (20 kg) Spool
S246519-056 1/16” (1.6 mm) 600 lb (272 kg) Exacto-Pak
S246525-002 5/64” (2.0 mm) 60 lb (27 kg) Coil
S246525-008 5/64” (2.0 mm) 600 lb (272 kg) Drum
S246529-002 3/32” (2.4 mm) 60 lb (27 kg) Coil
S246529-008 3/32” (2.4 mm) 600 lb (272 kg) Drum
S246529-069 3/32” (2.4 mm) 800 lb (363 kg) Flat Reel
S246539-002 7/64” (2.8 mm) 60 lb (27 kg) Coil
FabCO® Excel Arc™ 71 - ALL POSITION
AWS E71T-1C/M H8, E71T-9C/M H8
•Low spatter and easy slag removal reduce cleanup time •Increased welder appeal and productivity •Good impact toughness at low temperatures resists cracking in severe applications
Typical Applications: •Non-alloyed and fine grain steels •Structural steel •General fabrication
•Heavy equipment
Tensile Strength (psi): 84,000 (579 MPa) 90,000 (619 MPa)
Yield Strength (psi): 77,000 (531 MPa) 83,000 (571 MPa)
Elongation % in 2” (50 mm): 28% 26%
Approvals and Conformances: • AWS A5.20, E71T-1C H8, E71T-1M H8, E71T-9C H8, E71T9M H8 •AWS A5.20M, E491T-1C H8, E491T-1M H8, E491T-9C H8, E491T-9M H8 •ASME
SFA 5.20, E71T-1C H8, E71T-1M H8, E71T-9C H8, E71T-9M H8 •ABS, 100% CO2 S3YM
HH (0.045” - 1/16” diameter electrodes) •Burea Veritas, 100% CO2, S3YM HH (0.045” - 1/16”
diameter electrodes) •CWB, 100% CO2 E491T-9-H8, 75-80% Ar/Balance CO2, E491T-9M-H8
(1.2 mm - 1.6 mm diameter electrodes) •DNV, 100% CO2, Y40MS (H10) •EN17632-A: T 46 3 P
C/M 2 H10 •CE Marked per CPR 305/2011 •Lloyd’s Reigster, 100% CO2, 3YS H10 •AWS D1.8/
D1.8M, 100% CO2 & 75% Ar/25% CO2, (0.045” [1.2 mm] & 1/16” [1.6 mm] diameter electrodes)
(0.052” [1.4 mm] diameter 75% Ar/25% CO2 only) •CO2 (0.045" [1.2 mm] and 1/16" [1.6 mm]
diameter electrodes)
Part No.
Diameter
Package Size
S247108-022 0.035” (0.9 mm) 10 lb (4.5 kg) Spool
S247108-029 0.035” (0.9 mm) 33 lb (15 kg) Spool
S247112-002 0.045” (1.2 mm) 60 lb (27 kg) Coil
S247112-023 0.045” (1.2 mm) 15 lb (7 kg) Spool
S247112-029 0.045” (1.2 mm) 33 lb (15 kg) Spool
S247112-044 0.045” (1.2 mm) 44 lb (20 kg) Spool
S247112-064 0.045” (1.2 mm) 400 lb (181 kg) Exacto-Pak
S247115-002 0.052” (1.4 mm) 60 lb (27 kg) Coil
S247115-023 0.052” (1.4 mm) 15 lb (7 kg) Spool
S247115-027 0.052” (1.4 mm) 50 lb (22.7 kg) Spool
S247115-029 0.052” (1.4 mm) 33 lb (15 kg) Spool
S247115-044 0.052” (1.4 mm) 44 lb (20 kg) Spool
S247119-002 1/16” (1.6 mm) 60 lb (27 kg) Coil
S247119-023 1/16” (1.6 mm) 15 lb (7 kg) Spool
S247119-029 1/16” (1.6 mm) 33 lb (15 kg) Spool
S247119-044 1/16” (1.6 mm) 44 lb (20 kg) Spool
S247125-002 5/64” (2.0 mm) 60 lb (27 kg) Coil
HOBART®
HOB/2455
Tubular Wires
Fabshield XLR-8 - ALL POSITION
®
AWS E71T-8JD H8
•Welds out of position at high currents for high productivity •Excellent mechanical properties
within a wide range of heat inputs •Self-shielded; can be used outdoors without sheltering
•Excellent slag removal reduces cleanup time and risk of inclusion
Typical Applications: •Structural steel fabrication •AWS D1.8 Demand Critical welds •Ship
and barge construction •Heavy equipment repair
Approvals and Conformances: •AWS A5.20, E71T-8JD H8 •AWS A5.20M, E491T-8JD H8
•ASME SFA 5.20, E71T-8JD H8 •ABS, 3YSA H10 (1/16” - 5/64” diameters) •CWB, E491T-8JH8 (1.6 - 2.0 mm diameters) •EN 17632-A: T42 2 Y N 2 H10 •CE Marked per CPR 305/2011
(1.6 - 2.0 mm diameters) •AWS D1.8/D1.8M Conformance [1/16” - 5.64” (1.6 - 2.0 mm)
diameters]
Part No.
Diameter
Package Size
S225729-014 3/32” (2.4 mm) 50 lb (22.7 kg) Coil
S225719-053 1/16” (1.6 mm) 33 lb (15 kg) Vacuum Pkgd Spool
S225719-070 1/16” (1.6 mm) 12 lb (5.4 kg) Vacuum Pkgd Spool
S225724-053 0.072” (1.8 mm) 33 lb (15 kg) Vacuum Pkgd Spool
S225724-070 0.072” (1.8 mm) 12 lb (5.4 kg) Vacuum Pkgd Spool
S225724-082 0.072” (1.8 mm) 20 lb (9 kg) Vacuum Pkgd Spool
S225725-014 5/64” (2.0 mm) 50 lb (22.7 kg) Coil
FabCOR® Edge™ - FLAT & HORIZONTAL
AWS E70C-6M H4
•Higher deposition rates help increase travel speed and productivity •Excellent wetting
characteristics and gap bridging capabilities •Virtually no silicon deposits at weld bead toe lines
reduces cleanup time and minimizes risk of inclusions
Typical Applications: •Heavy equipment •Agriculture •Robotic and mechanized welding •Nonalloyed and fine grain steels
91,000 (630 MPa) 97,000 (669 MPa)
Tensile Strength (psi): Yield Strength (psi): 81,000 (561 MPa) 87,000 (600 MPa)
Approvals and Conformances: •AWS A5.18, E70C-6M H4 •AWS A5.18M, E48C-6M H4
•ASME SFA 5.18, E70C-6M H4 •ABS, 80% Ar/20% CO2, 3YSA H5 (0.045” - 1/16” diameters,
flat position) •ABS, 90% Ar/10% CO2, 3YSA H5 (0.035” - 0.045” diameters, all position) •AWS
D1.8/D1.8M, 75% Ar/25% CO2 [0.052” (1.4 mm) diameter] •CWB, 75-95% Ar/Balance CO2,
E492C-6MJ-H4 (1.4 - 1.6 mm diameter) •CWB, 75-95% Ar/Balance CO2, E491C-6MJ-H4 (1.2
mm diameter) •EN17632-A: T 46 3 M M 3 H5 •CE Marked per CPR 305/2011 (0.9 - 1.6 mm
diameter)
Part No.
Diameter
FabCOR 86R
®
AWS E70C-6M H4
•High deposition rates and efficiencies improving productivity •Virtually no slag coverage and
low spatter levels reduce cleanup time •Smooth arc characteristics improve operator appeal
•Low diffusible hydrogen weld deposit minimizes risk of cracking
Typical Applications: •Railcar •Storage vessels •Steel structures •Earthmoving equipment
Tensile Strength (psi): 81,000 (558 MPa) 85,000 (586 MPa)
Yield Strength (psi): 69,000 (476 MPa) 75,000 (517 MPa)
Approvals and Conformances: •AWS A5.18, E70C-6M H4 •AWS A5.18M, E48C-6M H4
•ASME SFA 5.18, E70C-6M H4 •ABS, 80% Ar/20% CO2, 3YSA H5 (0.035” - 1/16” diameters)
•Bureau Veritas, 80% Ar/20% CO2, S3YMH5 (0.035” - 1/16” diameters) •CWB, 75-95% Ar/Balance CO2, E491C-6MJ-H4 (0.9 mm - 1.6 mm diameters) •CWB, 95% Ar/5% O2, E491C-6MJ-H4
(1.2 mm - 1.6 mm diameters) •DNV, 80% Ar/20% CO2, III Y40MS(H5) •Lloyd’s Register, 80%
Ar/20% CO2, 3Y40S H5 •AWS D1.8/D1.8M, 75% Ar/25% CO2, [0.045” (1.2 mm), 1/16” (1.6 mm)
diameter] •EN17632-A: T 46 2 M M 3 H5 •CE Marked per CPR 305/2011 (1.2 mm - 1.6 mm
diameters)
Part No.
Diameter
Package Size
S249412-002 0.045” (1.2 mm) 60 lb (27 kg) Coil
S249412-027 0.045” (1.2 mm) 50 lb (22.7 kg) Spool
S249412-029 0.045” (1.2 mm) 33 lb (15 kg) Spool
S249412-044 0.045” (1.2 mm) 44 lb (20 kg) Spool
S249415-002 0.052” (1.4 mm) 60 lb (27 kg) Coil
S249415-029 0.052” (1.4 mm) 33 lb (15 kg) Spool
S249415-027 0.052” (1.4 mm) 50 lb (22.7 kg) Spool
S249415-044 0.052” (1.4 mm) 44 lb (20 kg) Spool
S249419-002 1/16” (1.6 mm) 60 lb (27 kg) Coil
S249419-029 1/16” (1.6 mm) 33 lb (15 kg) Spool
S249419-044 1/16” (1.6 mm) 44 lb (20 kg) Spool
S249429-002 5/64” (2.0 mm) 60 lb (27 kg) Coil
S249429-008 5/64” (2.0 mm) 600 lb (272 kg) Drum
Package Size
S279308-029 0.035” (0.9 mm) 33 lb (15 kg) Spool
S279312-002 0.045” (1.2 mm) 60 lb (27 kg) Coil
S279312-027 0.045” (1.2 mm) 50 lb (22.7 kg) Spool
S279312-029 0.045” (1.2 mm) 33 lb (15 kg) Spool
S279315-002 0.052” (1.4 mm) 60 lb (27 kg) Coil
S279315-027 0.052” (1.4 mm) 50 lb (22.7 kg) Spool
S279315-029 0.052” (1.4 mm) 33 lb (15 kg) Spool
S279319-002 1/16” (1.6 mm) 60 lb (27 kg) Coil
S279319-029 1/16” (1.6 mm) 33 lb (15 kg) Spool
PROCORE
AAA/0020
Chrome Tape Measure
SAE/METRIC CHROME TAPES
METRIC CHROME TAPES
Part No. CTM-10, 1/2” wide blade, 10 ft./3 m.
Part No. CTM-16, 3/4” wide blade, 16 ft./5 m.
Part No. CTM-25, 1” wide blade, 25 ft./7.5 m.
Part No. CTM-3M, 1/2” wide blade, 3 m.
Part No. CTM-5M, 3/4” wide blade, 5 m.
Part No. CTM-8M, 1” wide blade, 8 m.
C.H. HANSON
CHH/1561
Marking Stamps
STANDARD GRADE
Recommended Use: Medium to light duty
Features: Standard size shank for hand striking
PREMIER GRADE
Recommended Use: Ideal for prolonged industrial use
Features: Larger shank for better impression and tempered for
durability and safety
27 PIECE LETTER SETS
•Each set contains:
1 of each: All letters (26 pieces A-Z), Ampersand
•Tempered shanks for extra safety
Part No.
Character
Shank Size
Size
STANDARD GRADE
20200
1/8”
20250
3/16”
20300
1/4”
PREMIER GRADE
22150
1/8”
22250
3/16”
22350
1/4”
22400
5/16”
22450
3/8”
22550
1/2”
DOT (PREMIER GRADE)
26200
1/8”
26250
3/16”
26300
1/4”
26350
3/8”
Weight
1/4” x 2-3/8”
5/16” x 2-3/8”
3/8” x 2-5/8”
1.48 lbs
2.14 lbs
3.17 lbs
3/8” x 2¾”
7/16” x 2¾”
1/2” x 3”
9/16” x 3-1/8”
5/8” x 3-1/8”
7/8” x 4”
3.18 lbs
4.14 lbs
5.75 lbs
7.52 lbs
10.69 lbs
17.54 lbs
3/8” x 2¾”
7/16” x 2¾”
1/2” x 3”
5/8” x 3-1/8”
3.11 lbs
4.13 lbs
7.77 lbs
10.20 lbs
1 of each: 0, 1, 2, 3, 4, 5, 6, 7, 8 (the 6 is used as a 9)
•Crowned striking surface ensures full force to the center of the
stamp and textured shank provides firm easy grip
Part No.
Character
Shank Size
Size
STANDARD GRADE
20541
1/8”
20561
3/16”
20581
1/4”
PREMIER GRADE
22861
1/8”
22901
3/16”
22941
1/4”
22961
5/16”
22981
3/8”
23021
1/2”
DOT (PREMIER GRADE)
26601
1/8”
26621
3/16”
26641
1/4”
26661
3/8”
29100
29150
29200
29250
29300
29350
1/8” Letter Set
1/8” Number Set
1/4” Letter Set
1/4” Number Set
3/8” Letter Set
3/8” Number Set
1 of each: All letters (26 pieces A-Z), Ampersand, 0, 1, 2, 3, 4,
5, 6, 7, 8 (the 6 is used as a 9)
•Fits flat in tool boxes
Weight
Part No.
1/4” x 2-3/8”
5/16” x 2-3/8”
3/8” x 2-5/8”
0.51 lbs
0.72 lbs
1.07 lbs
STANDARD
20624
20625
20626
3/8” x 2¾”
7/16” x 2¾”
1/2” x 3”
9/16” x 3-1/8”
5/8” x 3-1/8”
7/8” x 4”
1.07 lbs
1.40 lbs
1.93 lbs
2.55 lbs
3.38 lbs
6.31 lbs
3/8” x 2¾”
7/16” x 2¾”
1/2” x 3”
5/8” x 3-1/8”
1.06 lbs
1.40 lbs
1.94 lbs
3.34 lbs
•1/2” x 3” long steel stamp
Part No. 26990, 1/16” size.
Part No. 26991, 3/32” size.
Character
Shank Size
Size
1/8”
3/16”
1/4”
1/4” x 2-3/8”
5/16” x 2-3/8”
3/8” x 2-5/8”
Weight
2.95 lbs
3.78 lbs
5.14 lbs
“DO NOT COPY” STEEL
STAMP
Part No. 26992, 3/32” size.
“MASTER” STEEL STAMP
Weight
3.18 lbs
1.91 lbs
6 lbs
2.02 lbs
10.69 lbs
2.14 lbs
36 PIECE LETTER & NUMBER SETS
“DO NOT DUPLICATE”
STEEL STAMPS
•Each letter set contains:
1 of each: All letters (26 pieces A-Z), Ampersand
•Each number set contains:
1 of each: 0, 1, 2, 3, 4, 5, 6, 7, 8 (the 6 is used as a 9)
•Withstands highly corrosive environments
•Ideal for industries where cross contamination resistance are critical
Description
Offers the most reduced stress mark by producing a character
that is impressed in a dot formation. Used where reduced
stress marking is required
9 PIECE NUMBER SETS
440C STAINLESS STEEL STAMPS
Part No.
DOT
Part No. 26993, 3/32” size.
29100
KUNY’S
KUN/2610
Tool Pouches, Holders, & Carriers
CANVAS MESSENGER BAG
•Heavy-duty canvas construction •Adjustable waist belt with quick release buckle that
can be used as a shoulder strap •Adjustable
hoop and loop closure flap •Internal back wall
pockets •Heavy-duty stitching
Part No. SW-725.
JAV/2562
JAVELIN INDUSTRIAL
Fab Tools
FIRE RETARDANT WELDERS’
UMBRELLA
Fits in any Javelin pipe stand. Lightweight and strong. 5.5 ft.
diameter size and is able to pivot 45°.
Part No. UMB.
MILTON
MIL/2823
Inflator Gauges
INFLATOR TIRE GAUGE
For Truck Tires:
10 - 160 psi in 2 lb. increments. 5 ft. hose that has a dual head
lock-on. 6” extension with push on/lock coupling. Push-button
deflator valve. Meets OSHA regulation 1910, 177 on inflation.
Part No. 553.
TAPE
III/2680
Industrial Tape
COLOURED PVC TAPE
3/4” x 66 ft. roll.
Part No. COL66-BLU, Blue.
Part No. COL66-BRW, Brown.
Part No. COL66-GRN, Green.
Part No. COL66-GRY, Grey.
Part No. COL66-ORG, Orange.
Part No. COL66-PUR, Purple.
Part No. COL66-RED, Red.
Part No. COL66-WHI, White.
Part No. COL66-YEL, Yellow.
GPI®
GPI/2443
Fuel Transfer Pumps
EZ-8 FUEL TRANSFER PUMPS
Ideal for filling small tanks on recreational, lawn, and landscape equipment
•Gas station equivalent flowrate
•Extremely lightweight design for use on small tanks and barrels
•Self-priming low maintenance design
•Choose between direct mount or spin collar design that allows versatile mounting positions
•Thermal overload protection
Part No. 137100-05, Spin Collar.
Part No. 137100-01, Direct Mount.
SPECIFICATIONS:
Flowrate (GPM / LPM): 8 / 30
Voltage: 12-volt DC
Type: Rotary Gear
Duty Cycle (On / Off): 15 min. / 30 min.
Power Cord: 15 ft. (4.6 m) x 14/2 AWG
Inlet / Outlet Size: 3/4” / 3/4”
Dispensing Hose: 10 ft. (3.0 m) x 5/8”
Suction Pipe: Trim-to-Fit
Designed for agriculture, automotive and construction applications
•18 GPM flowrate, used to fill equipment faster in mobile application
•Spin collar design for versatile, end user preferred mounting positions
•Extremely long life and trouble-free operation
•Cast aluminum construction
•Low profile design for increased visibility when used on mobile tanks in pickup trucks
•Circuit breaker motor protection
Part No. 110300-2, Automatic.
Part No. 110300-1, Manual.
SPECIFICATIONS:
Voltage: 12-volt DC
Type: Rotary Gear
Power Cord: 18 ft. (5.5 m) 12/2 AWG
Inlet / Outlet Size: 1” / 1”
Dispensing Hose: 12 ft. (3.7 m) x 1”
Suction Pipe: Telescoping to 40”
Mount Spin: Collar
Nozzle Holder: Lockable
Part No. Voltage
12V
12V
12V
24V
Designed for stationary locations in fleet, agriculture or industrial applications.
•Spin collar design for versatile end user preferred mounting positions
•Internal auxiliary temperature limiting device and circuit breaker motor protection
Part No. 110000-82, Automatic.
SPECIFICATIONS:
Voltage: 115-volt AC
Type: Rotary Gear
Inlet / Outlet Size: 1” / 3/4”
Mount: Spin Collar
Nozzle Power
Holder Cord
Automatic Lockable 18 ft.
Manual Lockable 18 ft.
Manual Standard 18 ft.
Manual Lockable 18 ft. Nozzle
Suction Pipe
Hose
Mount
Telescoping
Telescoping
Trim-to-Fit
Telescoping 12 ft.
12 ft.
10 ft.
12 ft. Spin Collar
Spin Collar
Direct Mount
Spin Collar
SPECIFICATIONS:
Voltage: 12-volt DC / 24-volt DC
Type: Rotary Gear
Power Cord: 18 ft. (5.5 m) 12/2 AWG
Dispensing Hose: 12 ft. (3.7 m) x 3/4” OR 10 ft. (3 m) 3/4”
Suction Pipe: Telescoping to 40” OR Trim-to-Fit
M-3025 & M-3425 FUEL TRANSFER PUMPS
When reduced fueling time is critical, the highflow M-3025 delivers with up to 25 GPM.
•Great for filling large capacity tanks on equipment found in construction, agriculture, mining and
logging applications
•Choose between two types of mount:
Weight centering inlet base includes pressure relief and easy strainer access
Straight base model with internal strainer
•Field-replaceable switch and vanes
•40 amp circuit breaker motor protection
Part No. Voltage
M-1115S FUEL TRANSFER PUMPS
133265-04
133265-03
133240-2
133240-1
133260-02
133260-01
12V
12V
12V
12V
24V
24V
Power
Hose
Cord
Auto Diesel 18 ft. 18 ft.
Manual 18 ft. 18 ft.
Nozzle
Inlet Mount
Center Base
Center Base
Straight Base
Straight Base
Straight Base
Straight Base
SPECIFICATIONS:
Voltage: 12-volt DC / 24-volt DC
Type: Carbon Vane
Power Cord: 18 ft. (5.5 m) OR 15 ft. (4.6 m) of 10/3 AWG
Dispensing Hose: 18 ft. (5.5 m) x 1” OR 12 ft. (3.7 m) x 1”
M-3130 FUEL TRANSFER PUMPS
30 GPM flowrate for stationary tank applications.
•Weight centering inlet base includes pressure relief and easy strainer access
•Internal auxiliary temperature limiting device motor protection
Part No. 133220-2, Auto Diesel.
M-3120 FUEL TRANSFER PUMPS
20 GPM flowrate for stationary tank applications.
Part No.
•15 GPM flowrate, empties 100 gallon mobile tanks in approximately 7 minutes
•Models with spin collar design offer versatile mounting positions
•Low profile design for increased visibility when used on mobile tanks in pickup trucks
•Circuit breaker motor protection
110000-100
110000-99
110000-107
110000-70 M-180S FUEL TRANSFER PUMPS
133200-33
133200-2
133200-34
133200-1
M-150S & M-240S FUEL TRANSFER PUMPS
Nozzle
Hose
Auto Diesel
Auto Leaded
Manual Leaded
Manual Leaded
1”
3/4”
1”
3/4”
SPECIFICATIONS:
Voltage: 115/230-volt AC
Type: Carbon Vane
Inlet / Outlet Size: 1¼” / 1”
Dispensing Hose: 12 ft. (3.7m) x 1”
Inlet Mount: Center Base
Thread: NPT
SPECIFICATIONS:
Type: Carbon Vane
Please consult a Gregg's Representative for additional information about GPI and accessories
GPI®
GPI/2443/2447
Fuel Transfer Pumps
M-150S COMBO FUEL TRANSFER SYSTEMS
•Combo includes the low profile FM-200 meter and M-150S Pump
•Spin collar design offers versatile mounting positions
•Low-profile design for increased visibility when used on mobile tanks in pickup trucks
•Meter available in litre model
Part No. 110610-14, Automatic nozzle.
Part No. 110610-12, Manual nozzle.
SPECIFICATIONS:
Voltage: 12V DC
Type: Rotary Gear
Power Cord: 18 ft. (5.5 m) x 12/2 AWG
Suction Pipe: Telescoping up to 40”
Inlet Mount: Spin Collar
M-180S COMBO FUEL TRANSFER PUMPS
•This combo special includes the M-180S pump, a filter, a filter adapter, and a Filter Installation
Kit •This pump and filter combo makes installation quick and easy •Explosion proof motor • To
Use With: Gasoline, Up to 15% alcohol blends such as E15, diesel fuel, Up to 20% biodiesel
blends such as B20, and kerosene
Part No. 110612-02, Automatic nozzle.
Part No. 110612-01, Manual nozzle.
SPECIFICATIONS:
Voltage: 12 Volts DC
Mechanical Connection: 1” Inlet / 1” Outlet
Flowrate: Up to 18 GPM / 69 LPM
Duty Cycle: 30 minutes On / 30 minutes Off
Hose: 12 ft (3.7 m) x 1” diameter
Power Cord: 18 ft (5.5 m) 12/2 AWG
Suction Pipe: Adjustable to 40”
M-3120 & M-3130 COMBO FUEL TRANSFER SYSTEMS
Designed for Stationary Tank Applications where high flow and long life are desired
•Factory assembled GPI Combos are available with the M-3120 or M-3130 pump and include the
MR 5-30 meter. Meter is calibrated in litres.
•Tank adapter included
Part No. 133600-62, Auto Leaded.
Part No. 133601-61, Auto Diesel.
SPECIFICATIONS:
Type: Carbon Vane
SPECIFICATIONS:
Voltage: 115- or 230-volt AC
Type: Carbon Vane
Inlet / Outlet Size: 1¼” / 1”
CABINET MODEL FUEL TRANSFER SYSTEMS
For fleet operations, golf courses and equipment yards
•Choose a 115-volt or 230-volt pump. Both deliver up to 20 GPM (76 LPM)
•Includes MR 5-30 mechanical meter with twist knob reset and large readout
•Includes tank adapter for easy installation
•Nozzle holder and hanger accommodates most gas and diesel nozzles (manual, automatic and
vapor recovery)
•Hose and nozzle sold separately
•Powder-coated exterior improves corrosion resistance
•Performs well in salt-spray environments
•Accessories come with stainless steel hardware
Part No. 143620-02, 115V.
Part No. 143620-05, 230V.
SPECIFICATIONS:
Voltage: 115-volt AC or 230-volt AC
Type: Carbon Vane
Inlet Mount: 2”
REMOTE DISPENSER FUEL TRANSFER PUMPS
Assemble a system that will provide ground-level access to your meter and nozzle
on above ground tanks in 4 easy steps.
1
Choose the Remote Dispenser
Includes: Dispenser, Nozzle Holder, Solenoid
Valve and MR 5-30 Meter
Part No. 143650-02, Litre units.
2
Purchase the 20 or 30 GPM pump that
best meets your needs.
Part No. 133200-10, Flowrate (GPM / LPM):
20 / 76, Voltage: 115-volt AC.
Part No. 133220-05, Flowrate (GPM / LPM):
30 / 114, Voltage: 115- or 230-volt AC.
3
Add the correct Vacuum Breaker Kit for
your pump
Part No. 13353302.
Part No. 13353303.
4
Finish your installation with the proper
accessories
Part No. 143500-07, Mounting shelf kit.
Part No. 133511-02, Cabinet Base.
Part No. 906005-501, 1” Auto diesel nozzle.
Part No. 110121-8, 3/4” Automatic unleaded
nozzle.
110121-8
133200-10
13353302
133511-02
906005-501
GPI®
GPI/2443
Speciality Pumps
AVIATION PUMPS
Aviation Pumps & Meters are only intended to be ground-based or vehicle mounted. Do
not use or mount in or on the aircraft.
For use with: Aviation gasoline (AVGAS 100LL) and kerosene grade (JET A). User should
consult NFPA 407 Standard for Aircraft Fuel Servicing for safety requirements during ground fuel
servicing of aircraft using liquid petroleum fuels. This product has no actual or implied compliance with this standard.
Aviation Combo
Part No. 133240-202, Comes with #133240-200 and 126300-202.
Meter
Part No. 126300-202, Litre.
Aviation Pump
Part No. 110000-200, 12V, Flowrate (GPM / LPM): 15 / 57.
Part No. 133240-200, 12V, Flowrate (GPM / LPM): 25 / 95
Part No. 133600-200, 115V, Flowrate (GPM / LPM): 20 / 76
Part No. 133601-200, 115/230V, Flowrate (GPM / LPM): 30 / 114
METHANOL PUMPS
HEAVY-DUTY OIL PUMPS
•Designed for the growing alternative fuels market
•Industry uses include oil and gas and racing
•Compatible with ethanol
110700-04
•Specifically designed for use with high viscosity fluids.
•Consider the viscosity of the fluid and temperature range when choosing the oil pump for your
application
•For use with: Oil (up to 90W), waste oil, hydraulic fluid, anti-freeze and non-flammable oil-based
solvents. Do not use with gasoline or diesel fuel.
Part No.
137700-01
110700-01
MOTOR
Flowrate
Voltage
142100-03 16 QPM / 15 LPM 12V DC
142100-01 16 QPM / 15 LPM 115/230V AC
142100-02 32 QPM / 30 LPM 115/230V AC
Part No.
110700-04
137700-01
110700-01
Model No.
EZ-8
M-150S
M-1115S
Flowrate (GPM / LPM)
8 / 30
15 / 57
12 / 45
Voltage
12V DC
12V DC
115V DC
Type
GearGearGear
Duty Cycle (On / Off) 15 min. / 30 min. 30 min. / 30 min. 30 min. / 30 min.
Inlet / Outlet Size
3/4” / 3/4”
1” / 3/4”
1” / 3/4”
Inlet Mount
Spin Collar
Spin Collar
Spin Collar
Housing
Nickel Plated
Nickel Plated
Nickel Plated
SPECIFICATIONS:
Type: Gerotor
Nozzle: 3/4”. Ball Valve
Inlet / Outlet Size: 1”. / 3/4”
Suction Pipe :Trim-to-Fit
Housing: Aluminum
LIGHTWEIGHT OIL PUMPS
12V CHEMICAL PUMPS
Specifications
•Designed specifically for use with thin to medium viscosity petroleum fluids and up to 30W oil.
•Lightweight design is easy to move between barrels and drums.
•Do not use with gasoline, diesel fuel or waste oil.
Part No.
Flowrate
Voltage
Power Cord
118000-9 8 GPM / 30 LPM 12V DC 15 ft. (4.6 m) of 10/3
118003-11 8 GPM / 30 LPM 115V AC 3 ft. (.91m)
SPECIFICATIONS:
Type: Gear
Nozzle: 1” Ball Valve
Inlet Mount: Spin Collar
Housing: Polypropylene
118000-9
Power Cord
None
3 ft. (.91m)
3 ft. (.91m)
MOTOR
UL RECOGNIZED
COMPONENT
142100-01
Recommended Use:
•#118000-2: Medium/Thick Chemicals (10 to 450 centipoise viscosity). Do not use with gasoline,
diesel fuel or micro-encapsulated chemicals.
•#118000-1: Thin Chemicals (0 to 10 centipoise viscosity). Do not use with gasoline, diesel fuel
or micro-encapsulated chemicals.
Power
Includes
Cord
118000-2 8 GPM / 30 LPM 15 ft.
2” Union Ring
118602-10 8 GPM / 30 LPM 15 ft. Tote-a-Pump Assembly
118000-1 12 GPM / 45 LPM 20 ft.
2” Union Ring
Part No.
Flowrate
SPECIFICATIONS:
Voltage: 12-volt DC
Type: Gear
Inlet Mount: Direct Mount
Housing: Plastic
118602-10
115V CHEMICAL PUMPS
Recommended Use:
•#118003-2: Medium/Thick Chemicals (10 to 450 centipoise viscosity). Do not use with gasoline,
diesel fuel or micro-encapsulated chemicals.
•#118003-1: Thin Chemicals (0 to 10 centipoise viscosity). Do not use with gasoline, diesel fuel
or micro-encapsulated chemicals.
Part No.
118003-2
118602-12
118003-1
118602-11
Flowrate
Includes
8 GPM / 30 LPM
2” Union Ring
8 GPM / 30 LPM Tote-a-Pump Assembly
12 GPM / 45 LPM
2” Union Ring
12 GPM / 45 LPM Tote-a-Pump Assembly
SPECIFICATIONS:
Type: Gear
Power Cord: 3-Prong Grounded Plug
Housing: Plastic
118003-2
GPI®
GPI/2444-47
DEF Pumps & Meter
BUILD YOUR OWN DEF BARREL SYSTEM
•Closed systems are designed to maintain consistent product purity
•Use with closed valves
1
2
Choose the correct coupler for your closed
container valve
Purchase your DEF pump kit
DEF PUMP KIT
•Lever action pump
•Designed for drums up to 36”
•Use with single-use, disposable/ recyclable containers
•Reusable – durable stainless steel construction provides years •Nozzle, dispensing and suction hoses included
Part No. 118450-33.
of service
SPECIFICATIONS:
Part No. 118450-52, Keyed System. Connects to EPV 3A
Flowrate: 1 pint per stroke
orange container valve.
Nozzle: Ball Valve
Part No. 118450-53, Diesel exhaust fluid 4-pin keyed system.
Inlet / Outlet Size: 3/4” / 1” hose barb
Connects to RSV container valve.
Dispensing Hose: 72” Clear Tubing
DISPENSE COUPLERS
3
Mount with barrel bracket
BARREL BRACKET
Part No. 118450-51.
CLOSED TOTE SYSTEMS
•Universal Design to work with most totes
•Kits include all parts needed to dispense product
•Powder coated shelf for universal cage mounting
Part No.
Power Cord
Voltage
118450-30 Three-prong connector 115V AC
118450-32 20 ft. with Clamp Kit 12V DC
118450-52
SPECIFICATIONS:
Type: Gear
Nozzle: Automatic Stainless Steel
Dispensing Hose: 12 ft. x 3/4”
Suction Hose: 60”
Mounting Bracket: Tote Bracket
Micro Matic Coupler: RSV
118450-53
DEF METER
Part No. 120000-32.
SPECIFICATIONS:
Construction | Type: PBT Polyester - Electronic Disc
Flow Range (GPM / LPM): 2-20 / 7-76
Thread Size: 1”
Powered By: One alkaline 9 Volt battery
Accuracy: +/– 2% of reading
Pressure Rating: 50 PSI
Field Calibration: Yes
Display: 6-digit LCD
Hand Pumps
HP-100 HAND PUMPS
•Lever action piston pump with lockable handle
•Dual-flo® handle provides high volume and low volume
settings.
•Pumps fluid on both the push and pull strokes for fast delivery.
•Built-in anti-siphon valve
•For Use with: Gasoline, diesel fuel, kerosene, medium oil (up
to 30W) and hydraulic fluid
Part No. 114000-5, Thermoplastic nozzle.
Part No. 114000-10, Metal nozzle.
SPECIFICATIONS:
Flowrate (GPM / LPM): Up to 50 Gal / 189 Litres per 100 Strokes
Type: Piston
Tank Fitting: 2”
HP-90 HAND PUMP
DP-20 HAND PUMPS
SPECIFICATIONS:
Flowrate (GPM / LPM): 25 / 95 per 100 Strokes
Type: Piston
Tank Fitting: 2”
Suction Pipe: Trim-to-Fit
SPECIFICATIONS:
Flowrate (GPM / LPM): 20 / 76 per 100 Strokes
Type: Diaphragm
Nozzle: Thermoplastic
Tank Fitting: 2”
•Lever action piston pump
•Pumps fluid on both the push and pull strokes for fast delivery
•For Use with: Gasoline, diesel fuel and kerosene. Light oil (up
Part No. 131000-1, Thermoplastic nozzle.
•Lever action diaphragm pump with lockable handle
•Can be used for dirty or contaminated fluids
Part No. 138000-01, Buna-N® hose.
Part No. 138000-02, U.L. Listed hose.
GPI®
GPI/2444/2445
Hand Pumps
RP-10 HAND PUMP
RP-5 HAND PUMP
SPECIFICATIONS:
Flowrate (GPM / LPM): 10 / 38 per 100 Revolutions
Type: Rotary
Nozzle: Metal
Tank Fitting: 2”
Dispensing Hose: 8 ft. (2.5 m) x 3/4” with Static Wire
SPECIFICATIONS:
Flowrate (GPM / LPM): 8 / 30 per 90 Revolutions
Type: Rotary
Nozzle: Spout
Tank Fitting: 2”
Suction Pipe: Three-Piece Metal
BP-12 HAND PUMP
CP-5 HAND PUMP
BP-10 HAND PUMP
SPECIFICATIONS:
Flowrate: Up to 1 Pint per Stroke
Type: Piston
Nozzle: Spout
Tank Fitting: 2”
Suction Pipe” Telescoping to 36”
SPECIFICATIONS:
Flowrate: Up to 8 Ounces per Stroke
Type: Piston
Nozzle: Clear tubing
SPECIFICATIONS:
Flowrate: Up to 1.5 Pints per Stroke
Type: Piston
Nozzle: Spout
Tank Fitting: 2”
FM-100 & FM-200 MECHANICAL
FUEL METERS
DR 5-30 DIGITAL FUEL METERS
•Rotary action pump with lockable handle for security
Part No. 123000-06.
•Lever action piston pump
•Convenient lever handle on a barrel pump
•For Use with: Lightweight petroleum products, oils, antifreeze
and kerosene.
Part No. 129010-1.
•Basic, rotary action pump
•For Use with: Petroleum based fluids having a flash point
above 38°C (100°F). Diesel fuel and kerosene. Light oil (up to
10W) and hydraulic fluid. Do not use with gasoline.
Part No. 129003-1.
•Plunger action piston pump
•Very portable and requires no special tools to install. Slips into
a five gallon pail.
•For Use with: Hydraulic fluids, transmission fluids or motor oils
Part No. 129002-1.
LP-50 HAND PUMP
•Lever action pump
•Works with drums up to 36 in.
•For Use with: Water, Antifreeze, Diesel Fuel, Petroleum Based
Products, Mild Detergents, Lubricants and most Ag Chemicals.
Not for use with kerosene, Roundup® Concentrate or Flammable Fluids.
Part No. 129000-1.
SPECIFICATIONS:
Flowrate: Up to 1 Pint per Stroke
Type: Piston
Nozzle: Spout
Tank Fitting: 2”
•Basic plunger action pump
•Removable spout for garden hose attachment
•For Use with: Petroleum products such as light oil (up to 10W),
transmission fluid and hydraulic fluid.
Part No. 129020-1.
Meters
MR 5-30 MECHANICAL FUEL
METERS
•Versatile mounting positions with included inlet/outlet fittings
•Rotatable register for desired flow direction
•Batch and cumulative display
•Compatible with Pulser Kit #126517-05 (sold separately)
•Liter units
Part No. 126300-02, 3/4” Thread.
Part No. 126300-04, 1” Thread.
Part No. 126300-06, 1½” Thread.
SPECIFICATIONS:
Construction | Type: Aluminum - Nutating Disc
Flow Range (GPM / LPM): 5 to 30 / 19 to 114
Pressure Rating: 50 PSI (3.4 bar)
•Factory calibrated
•The FM100 has a built-in filter that protects equipment being
fueled
•For Use with: Gasoline, Gasohol, diesel fuel and kerosene.
Do not use with water or chemicals.
•Liter units
FM-100 Series
Part No. 111200-19, 3/4” Thread.
FM-200 Series
Part No. 111200-21, 3/4” Thread.
SPECIFICATIONS:
Construction: Aluminum
Type: Mechanical Nutating Disc
Flow Range (GPM / LPM) :4 to 20 / 15 to 76
Accurac:y +/– 2% of reading
Display: Max. Batch total: 4-digits
Cumulative total:
5-digits (gallons) / 6-digits (liters)
•Preprogrammed for seven different units of measure: Barrels
(42 g), Imperial Gallons, Litres, Ounces, Pints, Quarts and US
Gallons
•Front panel access to batch reset and field calibration
•Provides an open collector signal to customer supplied remote
device
•For Use with: Gasoline, diesel fuel and kerosene. Do not use
with water or chemicals.
Part No. 126300-11, 3/4” Thread.
Part No. 126300-13, 1½” Thread.
SPECIFICATIONS:
Type: Nutating Disc
Powered By: Four AA Batteries
Accuracy: +/- 2.00% Factory Calibration
+/- 1.00% Field Calibration
Certifications: U.L. 913, Intrinsically Safe for Class I, Division 1,
Group D. U.L. 25, Meters for Flammable and Combustible Liquids.
GPI®
GPI/2444/2447
Meters
01A SERIES DIGITAL FUEL METER
LM51DN OIL METER
LM-300 OIL METER
SPECIFICATIONS:
Type: Turbine
Powered By: Two alkaline AAA batteries
Accuracy: +/– 5.0% of reading
Field Calibration: No
Certifications: FM Approved as Intrinsically Safe for Class I, Division
1 Groups A thru G. U.L. classified to Canadian Standards. ATEXANNEX VIII. CE.
SPECIFICATIONS:
Type: Oval Gear
Flow Range (GPM / LPM): 0.26 to 7.8 / 1 to 30 @ 5-1,000 cps
Powered by: Lithium Battery
Thread Size: 1/2” NPT
Units: Gallon / Litre
SPECIFICATIONS:
Construction: PBT Polyester
Type: Nutating Disc
Flow Range (QPM / LPM): 8 to 80 / 7.5 to 76
Inlet/Outlet: 1” (3/4” Bushings Included)
Units: Gallons, Quarts, Litres & Ounces
FM-100H CHEMICAL METER
FM-300H CHEMICAL METER
01N WATER METER
SPECIFICATIONS:
Type: Mechanical Nutating Disc
Accuracy: Factory: +/– 2% of reading
Field: +/– 1% of reading
Display: 4-digits
SPECIFICATIONS:
Construction | Type: PBT Polyester
Type: Nutating Disc
Thread Size: 1”
Accuracy: Factory: +/– 2% of reading
Field: +/– 0.5% of reading
Display: Maximum value is 999,999 (x 100)
SPECIFICATIONS:
Construction: Nylon
Type: Electronic Digital
Thread Size: 1”
Powered By: Two alkaline AAA batteries
•Compact and lightweight at just 12 oz.
•Mount directly to the nozzle for easy reading
•Includes 3/4” reducer fitting and 3/4” x 1½” pipe fitting
•Litre unit
•Keeps both Batch and Cumulative totals.
•For Use with: Most herbicides and other chemicals compatible
with meter materials. Do not use with water.
•Litre units
•Gallons, litres, pints or quarts display
•Designed with oval rotors for optimum accuracy
•For use with: Engine oils, transmission fluid (maximum viscosity SAE 140) or antifreeze. Do not use with excessively dirty
fluids or fluids with particles without installing a filter.
Part No. LM51DN.
•Electronic display keeps Batch and Cumulative totals. Mounts
easily on hose end, pump or fluid transfer system.
•For Use with: Fertilizers, oil, pesticides and water. Do not use
with gasoline, diesel or flammable liquids.
•Litre/Imperial Gallon units
Part No. 120000-2.
•For Use with: Motor oil, gear oil, hydraulic oil, antifreeze, ATF
and waste oil. Do not use with flammable fluids or antifreeze
that exceeds 50% water.
Part No. 120000-28.
•Compact and lightweight at just 12 oz.
•Mount directly to the nozzle for easy reading
•For Use with: Water
•Litre units
Part No. 113255-5.
TM SERIES WATER METER
•Sturdy construction with easy access to internal parts.
•For Use with: Water or mild chemicals
Specifications TM050-N TM075-N TM100-N TM150-N TM200-N
Size
1/2” 3/4”1”1½” 2”
Flow Rate (GPM)
1-10 2-20 5-50 10-100 20-200
CABINET MODEL
ACCESSORIES
Part No. 133170-01, Pedestal Kit: includes
base, 2” x 24” pipe and 2” NPT coupler.
DEF ACCESSORIES
Part No. 906008-03, Automatic Nozzle. Stainless Steel 3/4” hose barb inlet.
Part No. 906008-02 Manual Nozzle. Polypropylene, Stainless Steel 3/4” hose barb inlet
Part No. 906008-04, Ball Valve Nozzle 1” hose
barb inlet.
Part No. 118450-61, 6 ft. DEF Tubing 1”x 6 ft.
Part No. 118450-62, 12 ft. DEF Hose 3/4” x
12 ft.
Part No. 118450-63, 20 ft. DEF Hose 3/4”x
20 ft.
FUEL FILTER KITS
SPECIFICATIONS:
Construction: Schd. 80 PVC
Type: Turbine
Powered By: Two lithium batteries
Units: Gallon / Litre
Accessories
Part No. 133527-01, 3/4”. Includes: 3/4” NPT
cast iron adapter, 10 micron filter, and 3/4” x
4” nipple.
Part No. 133537-01, 1”. Includes: 1” NPT aluminum filter adapter 1 1/2 - 16 UNF, 30 micron
particulate filter, 1” NPT x 7” galvanized pipe
nipple, 1” NPT x 3” galvanized pipe nipple,
1” NPT x 1.5” (Close) galvanized pipe nipple,
1” NPT galvanized street elbow, and 1” NPT
galvanized elbow.
FUEL FILTER KITS
Part No. 906006-52, Cast Iron Adapter: 3/4”
NPT for 18 GPM - 14 UNF.
Part No. 906004-88, Cast Iron Adapter: 1”
NPT for 18 GPM, 1 - 12 UNF.
Part No. 129420-01, Cast Iron Adapter: 1”
NPT for 18 GPM, 1-3/8 - 12 UNF.
Part No. 906005-67, Aluminum Adapter: 1”
NPT for 30 and 40 GPM, 1-½ - 16 UNF.
906005-67
906008-03
133527-01
118450-63
906004-88
GPI®
GPI/2447
Accessories
FUEL FILTERS
Part No. 129300-01, Particulate Filter: (18 GPM/67 LPM) 10 micron, 1 - 12 UNF.
Part No. 129340-02, Particulate Filter: (18 GPM/67 LPM) 10 micron, 1 - 12 UNF. Includes
Draincock
Part No. 129340-01, Particulate Filter: (18 GPM/67 LPM) 10 micron, 1-3/8 - 12 UNF. Includes
Draincock
Part No. 129320-01, Particulate Filter: (30 GPM/113 LPM) 10 micron, 1 ½ - 16 UNF.
Part No. 129300-02, Water & Particulate Filter: (18 GPM/67 LPM) 10 micron, 1 - 12 UNF.
Part No. 129320-02, Water & Particulate Filter: (30 GPM/113 LPM) 10 micron, 1½ - 16 UNF.
Part No. 129340-04, Water & Particulate Filter: (Bio-Tek®) (25 GPM/95 LPM) 2 micron, 1 - 12
UNF.
Part No. 129340-05, Water & Particulate Filter: (Bio-Tek®) (40 GPM / 151 LPM) 2 micron, 1½
- 16 UNF.
CONVERSION &
OVERHAUL KIT
Includes: Two gears, Drive key and replacement seals for the gear cover motor shaft (use
motor shaft seal to
convert existing pump
to B100 compatible),
Poppet, Strainer, and
Switch cover plate.
Part No. 110504-1.
HERBICIDE KIT
Includes: Hose, Ball Valve Nozzle, and Adjustable Suction Pipe for 2” bung.
Part No. 111502-2.
HYDRAULIC FILTERS
Part No. 129922-01, 10 micron.
Part No. 129923-01, 25 micron.
REMOTE DISPENSER PUMPS & BREAKER KITS
KITS
Part No. 133514-01, Pump Vapor Recovery Kit.
Part No. 143500-07, Shelf Kit: For the MR 5-30 Remote Dispenser unit.
Part No. 13353302, Vacuum Breaker Kit: For M-3120.
Part No. 13353303, Vacuum Breaker Kit: For M-3130.
METER ACCESSORIES
Part No. 113520-1, Battery Replacement Kit: (For 03 and TM Series meters) Two lithium batteries.
Part No. 116000-1, Calibration Container: 5 Gallon (Do not use for fuel.)
Part No. 906004-85, Computer Cover: (For 03 and TM Series meters) Single Access Port.
Part No. 906004-86, Computer Cover: (For 03 and TM Series meters) Dual Access Port.
Part No. 126530-09, MR 5-30 Series Seal Kit: Two fitting O-rings and a housing O-ring.
Part No. 111506-2, FM-100 Series Overhaul Kit: Replacement seals and O-rings.
Part No. 901002-52, Meter O-ring: Seals the computer to the turbine housing. Fits Meter
Models 01 and 03.
Part No. 126517-05, Pulser Kit for MR 5-30: 115-volt AC.
PUMP ACCESSORIES
Part No. 110527-1, Battery Clamp Kit.
Part No. 133263-01, Battery Clamps: Heavy Duty.
Part No. 110909-1, Bung Adapter Kit: 2” NPT bung adapter.
Part No. 133511-02, Cabinet Base Assembly.
Part No. 906001-4, Pressure Vent Cap Assembly.
110527-1
Part No. 906004-62, Replacement Cap: (For Vent Cap Assembly).
Part No. 11080801, Security Collar: Plastic.
Part No. 11081801, Security Collar: Aluminum.
Part No. 110905-1, Shear Key Kit: Shear key for any gear pump.
Part No. 110243-01, Suction Pipe: Steel, Adjustable from 22 to 40”.
Part No. 110100-1, Suction Pipe: Plastic, Adjustable from 22 to 40”.
Part No. 115527-2, Suction Pipe Extension Kit: 15” (38 cm).
Part No. 110531-01, Switch Kit: (Fits M-120, M-150, M-1100, M-150S, M-180S, M-240S
models).
Part No. 121231-1, Tank Adapter: 2” x 1” FNPT.
Part No. 121231-5, Tank Adapter: 2” x 1¼” FNPT.
Part No. 13750005, Overhaul Kit for EZ-8: Motor shaft key, two gears and a set of replacement
seals.
Part No. 114505-2, Overhaul Kit for HP-100 Hand Pump: Piston ring, three seals, packing seals
and liner.
Part No. 123503-1 Overhaul Kit for RP-10 Rotary Hand Pump: Vanes,
springs, O-rings and gasket.
Part No. 133504-1, Seal Kit: Four replacement seals.
Part No. 133503-1, Shaft Seal Kit: Retaining ring, shaft seal and
spacer washer.
114505-2
Part No. 133501-1, Vane Kit: Shaft key, eight 1.25” vanes and one
seal.
Part No. 133502-1, Vane Kit: Shaft key, eight 2” vanes and one seal.
133501-1
NOZZLE ACCESSORIES
Part No. 906004-598, Automatic Leaded Nozzle (U.L. Listed): 3/4” NPT, curved spout for
M-3120.
Part No. 110121-8, Automatic Unleaded Nozzle: 3/4” NPT, straight spout for M-150S, M-180S,
M-240S, and M-1115S Series.
Part No. 906001-506, Manual Leaded Nozzle: 3/4” NPT, straight spout for M-3120 pump.
Part No. 110155-4, Manual Leaded Nozzle: 1 in. NPT for M-180S.
Part No. 906001-10, Manual Leaded Nozzle: 1” NPT, straight spout for M-3130 pump.
Part No. 110155-1, Manual Unleaded Nozzle: 3/4” NPT for M-150S, M-240S and M-1115S
Series.
110155-4
HOSE & NOZZLE KIT
For HP-100 and RP-10 Series.
Part No. 114504-3.
110909-1
121231-5
11080801
RIDGID®
RID/3337
Red Wet/Dry Vacuum Cleaners
4 GALLON PORTABLE WET/DRY VAC - 4000RV
•Powerful 5.0 Peak Horsepower - High performance wet/dry vacuum in a compact package.
•Longer motor life - Durable, long-lasting motor backs industry’s best warranty
•Cord-Wrap/Large Handle
•Rugged Polypropylene Drum Construction
•4 Gallon Drum
•Professional Locking Hose - The ultra-flexible hose won’t pull loose during use, and is 4x more
durable than our standard hose. This 1-7/8” x 8 ft. hose has a smooth interior surface to reduce
clogging and can be stored on-board.
•Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites, tools,
etc.
•Qwik Lock® Filter Fastening System - Makes installing or removing your filter quick, easy, and
secure without tools or fasteners
Includes: Vacuum, Owner’s Manual, (2) Extension Wands, 1-7/8” x 8 ft. Premium Locking Pro
Hose, Car Nozzle, Noise Muffler/Diffuser, and Fine Dust Filter.
Part No. 50313.
4.5 GALLON PROPACK® WET/DRY VAC - 4500RV
•5.0 Peak Horsepower - High performance wet/dry vacuum
•Longer motor life - Durable, long-lasting motor backs industry’s best warranty.
•Unique Design - Stores hose, accessories and 20 ft. power cord inside the vac keeping everything organized and close at hand
•Large Cushioned Handle
•Flat top work surface
•4.5 Gallon Drum
•1-7/8” ultra-flexible locking hose - Won’t pull loose during use, and the 2 ft. compact hose
extends to 7 ft.
etc.
secure without tools or fasteners.
Includes: Vacuum, Owner’s Manual, (2) Extension Wands, 1-7/8” x 2 to 7 ft. Expanding Hose,
Utility Nozzle, Dusting Brush, Crevice Tool, and Fine Dust Filter.
Part No. 50318.
6 GALLON WET/DRY VAC - 6000RV
•Incredible 4.25 Peak Horsepower - High performance wet/dry vacuum
•360º Caster Wheels
•Accessory Storage - Keeps accessories organized and close by for easy access
•Large Handle
•10 ft. power cord for extended reach.
•6 Gallon Drum
•Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites,
tools, etc.
•Qwik Lock® Filter Fastening System - Makes installing
or removing your filter quick, easy, and secure without
tools or fasteners
Includes: Vacuum, Owner’s Manual, (2) Extension Wands,
1-7/8” x 8 ft. Premium Locking Pro Hose, Utility Nozzle,
and Standard Filter.
Part No. 50308.
12 GALLON WET/DRY VAC - 1200RV
•Powerful 5.0 Peak Horsepower - High performance wet/dry vacuum
• Accessory Storage - Keeps accessories organized and close by for easy access
•12 Gallon Drum
etc.
•Large Drain - Located to lowest point of drum for emptying of water
Includes: Vacuum, Owner’s Manual, (2) Extension Wands, 1-7/8” x 8 ft.
Premium Locking Pro Hose, Utility Nozzle, Wet Nozzle, Car Nozzle,
and Standard Filter.
Part No. 50323 .
RIDGID®
RID/3337
14 GALLON WET/DRY VAC with CART - 1400RV
•Powerful 6.0 Peak Horsepower - High performance wet/dry vacuum
•Sturdy Cart, Push Handle and Large Rear Wheels - Allows the vac to travel easily up/down
stairs and over rough terrain and thresholds
•Accessory Storage Bag
•2-Piece Rugged Polypropylene Drum Construction
•14 Gallon Drum
• Sound Reduction Technology - Scroll Noise Reduction® is a patented feature that provides
quiet operation by precisely controlling the flow of air through the vac
clogging.
•Blowing capacity - Use to blow leaves from walkways or
decks, and debris from job sites, tools, etc.
•Large Drain - located to lowest point of drum for emptying
of water
•Qwik Lock® Filter Fastening System - Makes installing or removing your filter quick, easy, and secure without tools or fasteners
Includes: Vacuum, Owner’s Manual, (2) Extension Wands, 1-7/8”
x 8 ft. Premium Locking Pro Hose, Utility Nozzle, Wet Nozzle,
Crevice Tool, Car Nozzle, and Fine Dust Filter
Part No. 50348.
16 GALLON WET/DRY VAC with DETACHABLE BLOWER
- 1620RV
•Detachable Blower - The high performance vacuum has an integrated detachable blower for
maximum versatility. This is 2 tools in 1.
•Top of the line 6.5 Peak Horsepower - High performance wet/dry vacuum provides optimum
power
•Accessory Storage Caddy
•Quick Release Cord-Wrap - The cord-wrap not only stores the 20 ft. power cord, but the tab
rotates to quickly release the cord
•16 Gallon Drum
•Sound Reduction Technology - Scroll Noise Reduction® is a patented feature that provides quiet
operation by precisely controlling the flow of air through the vac
durable than our standard hose. This 1-7/8” x 8 ft. hose
has a smooth interior surface to reduce clogging.
•Large Drain - Located to lowest point of drum for emptying
of water
•Qwik Lock® Filter Fastening System - Makes installing or
removing your filter quick, easy, and secure without tools
or fasteners
1-7/8” x 8 ft. Premium Locking Pro Hose, Locking Blowing
Wand, Utility Nozzle, Wet Nozzle, Car Nozzle, and Fine
Dust Filter
Part No. 50343.
16 GALLON STAINLESS STEEL WET/DRY VAC with
CART - 1610RV
•Top of the line 6.5 Peak Horsepower - High performance wet/dry vacuum provides optimum
power
•Sturdy Cart, Push Handle & Large Rear Wheels - Allows the vac to travel easily up/down stairs
and over rough terrain and thresholds
•Stainless Steel Drum Construction - Attractive stainless steel construction provides professional
appearance
•16 Gallon Drum
clogging.
etc.
•Qwik Lock® Filter Fastening System - Makes installing or removing your
filter quick, easy, and secure without tools or fasteners.
Includes: Vacuum, Owner’s Manual, (2) Extension Wands, 1-7/8”
x 8 ft. Premium Locking Pro Hose, Utility Nozzle, Wet Nozzle,
Crevice Tool, Car Nozzle, and Find Dust Filter.
Part No. 50353.
14 GALLON 2-STAGE WET/DRY VAC with CART RV2400A
•11.5 Amp Motor - Drives two blower wheels to optimize suction and deliver industry-leading
performance
•2-Stage Motor - Creates powerful “high-lift” suction and more efficient air flow. Result – more
suction power and quieter operation
•Longer motor life - Over 700 hours on average
and over rough terrain and thresholds
•14 Gallon Drum
•Professional Locking Hose - The ultra-flexible hose won’t pull loose during use, and is 4x
more durable than our standard hose. This 1-7/8” x 10 ft. hose has a smooth interior surface to
reduce clogging
etc.
1-7/8” x 10 ft. Premium Locking Pro Hose, Utility Nozzle,
Wet Nozzle, Floor Brush, Crevice Tool, Muffler/Diffuser,
and Fine Dust Filter
Part No. 50358.
RIDGID®
RID/3337
16 GALLON 2-STAGE WET/DRY VAC - RV2600B
performance.
suction power and quieter operation.
•Sturdy Cart, Push Handle & Large Non-Marring Wheels - Allows the vac to travel easily up/
down stairs and over rough terrain.
•2-Piece Rugged Drum Construction
•16 Gallon Drum
operation by precisely controlling the flow of air through the vac.
•Professional Locking Hose - The hose won’t pull loose during use, and is 4x more durable than
our standard hose.
•Blowing capacity - Use to blow leaves from walkways or decks, and debris
from job sites, tools, etc.
•Large built-in drain - Drain located to lowest point of drum for emptying of
water.
Includes: Vacuum, Owner’s Manual, (2) Steel Extension Wands, 1-7/8”
x 10 ft. Premium Locking Pro Hose, Floor Tool with 3 inserts (Floor
Nozzle, Squeegee, & Carpet Cleaning Nozzle), Multipurpose Nozzle,
Crevice Tool, Muffler/Diffuser, and Fine Dust Filter.
Part No. 50363.
14 GALLON HEPA-CERTIFIED WET/DRY VAC - RV2400HF
•Meets EPA’s definition of a HEPA vacuum under RRP rule for lead paint renovations
•The certified HEPA filter is 99.97% efficient at filtering particulates down to 0.3 microns in size
performance
•3 Layers of Filtration - Disposable high-efficiency filter bags collect larger debris. Then a washable fabric filter cover captures particles down to 0.5 microns. The certified HEPA filter then
captures the smallest particulates down to 0.3 microns.
stairs and over rough terrain
•14 Gallon Drum
•Sound Reduction Technology - Scroll Noise Reduction® is a patented feature that provides
quiet operation by precisely controlling the flow of air through the vac
•Professional Locking Hose - The hose won’t pull loose during use, and is 4x more durable than
our standard hose
etc.
•Large built-in drain - Drain located to lowest point of drum for emptying of water
Includes: Vacuum, Owner’s Manual, 2 Extension Wands, 1-7/8” x 10 ft.
Premium Locking Pro Hose, Utility Nozzle, Wet Nozzle, 14” Floor Brush,
Crevice Tool, Muffler/Diffuser, Filter Bag, Cloth Pre-Filter, Certified HEPA
filter,”Beater Bar” turbo brush.
Part No. 50368.
16 GALLON MOTOR-ON-BOTTOM WET/DRY VAC 1650RV
•Motor on Bottom Design makes accessing filter and emptying drum cleaner and easier
•Foot-Activated Switch
•6.5 peak Horsepower motor - With nearly 25% more power than previous models
•Quick-Access Debris Door - Allows users to dump larger debris into the drum and continue
working
•Qwik Lock® Filter Fastening System - Makes installing or removing your filter quick, easy and
•Longer motor life - Durable, long-lasting motor backs the industry’s best warranty
stairs and over rough terrain
•Accessory Stretch Caddy - Keeps accessories close by and locked in when emptying
•Large Handle
•Cord-hook - Keeps the 20 ft. power cord with ALCI outlet neatly stored on-board
•16 Gallon Drum
operation by precisely controlling the flow of air through the vac. Additionally with the motor on
the bottom motor noise is hampered.
•Professional Locking Hose - The hose won’t pull loose during use,
and is 4x more durable than our standard hose
•Blowing capacity - Use to blow leaves from walkways or decks, and
debris from job sites, tools, etc.
•Large built-in drain - Drain located to lowest point of drum for emptying
of water
Includes: Vacuum, Owner’s Manual, 2 Extension Wands, 1-7/8” x 8’
Premium Locking Pro Hose, Utility Nozzle, Wet Nozzle, Crevice Tool,
Car Nozzle, Noise Muffler/Diffuser, Fine Dust Filter
Part No. 50338.
14 GALLON SMART PULSE™ WET/DRY VAC - RV3410
•Self Cleaning Filter - Reduce face loading with the Dual PTFE filters and differential pressure
to clean the filter.
performance.
•Longer motor life - Over 700 hours on average.
and over rough terrain.
•Spin welded Rugged Drum Construction
•14 Gallon Drum
operation by precisely controlling the flow of air through the vac.
etc.
•Large built-in drain - Drain located to lowest point of drum for emptying of water.
•Premium Locking Pro Hose - The ultra-flexible hose won’t pull loose during
use, and is 4x more durable than our standard hose. This 1-7/8” x 15 ft.
hose has a smooth interior surface to reduce clogging.
Includes: Vacuum, Owner’s Manual, 2 PTFE coated filters, 1-7/8” x 15 ft.
Locking Hose
Part No. 50373.
What is Smart Pulse™?
The Smart Pulse™ vac is designed with two filters
and an integrated sensor. The sensor is continuously
monitoring suction efficiency. When a pressure
difference inside the vac vs. the outside of the filter is
recognized by the sensor, the vac begins an alternating pulsing cycle, back-flushing air through the filter.
This process cleans the filter automatically, yet only
when needed, providing uninterrupted performance
and maximizing efficiency.
KRYLON
KRY/3662
Paint Products
SNAP & SPRAY GUN
•Offers more durability, comfort, and control when
spraying and transforms any spray can into a
spray gun •E-Z Pull FullGrip Trigger - eliminates
finger fatigue •Up to 8x easier to spray than the
leading competition •Improves accuracy and
control •Lightweight and easy to use with gloves
Part No. K07091000.
KIMBERLY-CLARK
KIM/1735
Paper/Wiping Products
PART NO.
DESCRIPTION
Bathroom Tissue:
17713
COLOUR
SIZE
WxL
COUNT PER
ROLL/PKG.
UNITS PER
CASE
4.09 x 4.0”
451
60
PLY
WASHROOM PRODUCTS
KLEENEX® Cottonelle® Standard Roll 32 NORTH
White
2
MMM/1173
STABILicers™ — Traction Gear
STABILicers™ HEEL
Provides superior traction in the critical heel zone, and features a
fully integrated tension fit system that secures firmly to boots and
shoes. The heel-only design is ideal for driving, and when the job
calls for repeated indoor/outdoor transitioning. Lightweight and
extremely durable, they’re easy to take on and off, and store easily
in a glove box or coat pocket. Adjustable strap allows for one size
to fit most applications, and can be shared amongst multiple users
and work crews. Replaceable cleats mean affordable, ongoing use
- season after season.
Part No. 700-00, Heel with Steel Cleats.
Part No. 700B-00, Heel with Brass Cleats.
GANDER BRAND
GAN/2305
TIG (Tungsten Inert Gas) Gloves
Heavy duty deer split - with wide cuff and back
hand patch on left hand only.
Part No. 1525-9, Size 9.
Part No. 1525-10, Size 10.
Part No. 1525-11, Size 11.
Part No. 1525-12, Size 12.
MECHANIX WEAR®
Professional Gloves
MATERIAL4X® FASTFIT® GLOVE
•Form-fitting TrekDry® material helps keep hands cool and
comfortable •Quick-fit elastic cuff provides a secure fit with easy
on/off flexibility •Reinforced thumb and index finger provide added
durability •Perforated back-of-hand allows for added ventilation
•Seamless Material4X® microfiber abrasion resistance and greater
tear resistance than standard synthetic gloves
Part No. MF4X-75-008, Small/size 8.
Part No. MF4X-75-009, Medium/size 9.
Part No. MF4X-75-010, Large/size 10.
Part No. MF4X-75-011, X-large/size 11.
Part No. MF4X-75-012, 2X-large/size 12.
MMM/2724
ERGODYNE®
ERG/2094
Squids™ Hard Hat Lanyard
ELASTIC HARD HAT LANYARD
WITH CLAMP
•Comfortably attaches to hard hats and other
headwear •Easy release clamp attaches securely to
just about anything •Comfortable high stretch elastic
material •Hi-Vis lime
Part No. 3155.
ACCUFORM SIGNS®
ACF/1222
Safety Tags
5¾” x 3¼”, Cardstock.
Part No. TSS103CTP.
Part No. TSS101CTP.
Part No. TRS318CTP.
6¼” x 3”, 250 per roll.
Part No. TAR125.
DANGEROUS GOODS
QQQ/2489
Placards
NON-REFLECTIVE DECALS - NUMBERED
STYRENE PLACARDS
Part No. PSN-2-1072, Class 2, 1072, (oxygen, compressed).
Part No. PSN-2-1075, Class 2, 1075, (liquefied petroleum gases, petroleum gases, liquefied).
Part No. PSN-3-1202, Class 3, 1202, (diesel fuel, fuel oil, gas oil, heating oil light).
Part No. PSN-3-1203, Class 3, 1203, (gasoline, motor spirit, petrol).
Part No. PSN-3-1230, Class 3, 1230, (methanol).
Part No. PSN-3-1267, Class 3, 1267, (petroleum crude oil).
Part No. PSN-3-1268, Class 3, 1268, (petroleum distillates, N.O.S., petroleum products, N.O.S.
Part No. PSN-3-1863, Class 3, 1863, (fuel, aviation, turbine, engine).
Part No. PSN-3-1993, Class 3, 1993, (flammable liquid, N.O.S.).
Part No. PSN-3-2924, Class 3, 2924, (flammable liquid, corrosive, N.O.S.).
Part No. PSN-3-3494, Class 3, 3494, (sour crude).
Part No. PSN-8-1760, Class 8, 1760, (corrosive liquid, N.O.S.).
3494
TARGET TECH
TAR/2198
Incandescent Beacons
FireBolt® LED BEACONS - SAE J845 CLASS II
3.60”H
5.10”W
The Firebolt Class 2 LED model offers (14) selectable flash patterns through Federal Signal’s
patented Power Select™ feature. The Power Select allows users to scroll through flash patterns
by simply following a sequence of applying power to the unit 3 times in a row which will put the
beacon into programming mode.
The shatterproof, polycarbonate dome and base includes an o-ring to help protect against
moisture •Built-in permanent ½” pipe mount base
•FireBolt, 12-24 VDC - Magnetic
mount with cigarette plug
Part No. 220260-02, Amber.
Part No. 220260-03, Blue.
PRONGHORN
PCR/3304
Booster Cables
ARCTIC INDUSTRIAL 100% COPPER BOOSTER CABLES
•Professional booster cables, with ”no tangle” twin line construction
•Packaged in a Hard Case
• -50°C Rating
Part No. Gauge Length Clamps
Clamp Type
25-0091
25-0092
25-0093
25-0094
25-0095
1/0 gauge
1/0 gauge
1/0 gauge
1/0 gauge
1/0 gauge
30 ft. 25 ft. 20 ft. 16 ft. 12 ft. 900 amp
900 amp
900 amp
900 amp
900 amp
HD Solid Copper Parrot Clamps
INDUSTRIAL HEAVY DUTY 100% COPPER
BOOSTER CABLES
•Professional booster cables, with “no tangle” twin line construction
•Packaged in a Canvas Bag • -40°C Rating
Gauge
Length
Clamps
Clamp Type
2 gauge
2 gauge
2 gauge
4 gauge
4 gauge
4 gauge
4 gauge
4 gauge
6 gauge
8 gauge
25 ft. 20 ft. 16 ft. 20 ft. 20 ft. 16 ft. 16 ft. 12 ft. 12 ft. 12 ft. 500 amp
500 amp
500 amp
500 amp
500 amp
500 amp
500 amp
400 amp
400 amp
200 amp
HD Coated Elongated
HD Coated Elongated
HD Coated Elongated
HD Coated Elongated
HD Coated Parrot
HD Coated Elongated
HD Coated Parrot
Standard Clamp
Standard Clamp
Standard Clamp
Part No.
25-0201
25-0202
25-0203
25-0401
25-0402
25-0403
25-0404
25-0405
25-0601
25-0801
(may not be exactly as illustrated)
QUICK CONNECT INDUSTRIAL HEAVY DUTY
100% COPPER BOOSTER CABLES
•Professional booster cables, with ”no tangle” twin line construction
•Packaged in a Hard Case
•Includes a 5 ft. harness lead and quick connect ends allowing for permanent
mounting options
• -40°C Rating
Part No. Gauge Length Clamps
Clamp Type
25-0100
25-0400
1 gauge
4 gauge
30 ft. 20 ft. 800 amp
500 amp
HD Epoxy Coated Clamps
HD Parrot Clamps
COPPER CLAD ALUMINUM (CCA) BOOSTER
CABLES
•More economical applications where maximum conductivity is not required
•“No tangle” twin line construction
•Packaged in a canvas bag
• -40°C Rating
Gauge
Length
Clamps
Clamp Type
4 gauge
6 gauge
8 gauge
10 gauge
16 ft. 12 ft. 10 ft. 10 ft. 400 amp
300 amp
200 amp
150 amp
Standard Clamp
Standard Clamp
Standard Clamp
Standard Clamp
Part No.
25-0413
25-0611
25-0811
25-0911
(may not be exactly as illustrated)
Booster Cable Clamps
Part No. 25-5520, 1 pair blister card, 200 amp Standard Clamp.
Part No. 25-5545, 1 pair blister card, 400 amp HD Coated Parrot.
Part No. 25-5550, 1 pair blister card, 500 amp Super HD Coated Elongated.
Part No. 25-5560, 1 pair blister card, 800 amp Super HD Coated Elongated.
Part No. 25-5581, 1 pair blister card, 800 amp Super HD Epoxy Coated.
Part No. 25-5583, 1 pair blister card, 800 amp Super HD Coated Elongated
with Spring Guard.
Part No. 25-5555, 1 pair blister card, 500 amp HD Coated Parrot.
25-5545
25-5585
100% black
25-5550
CMYK: C5 M25 Y90 K0
25-5520
CMYK: C45 M35 Y100 K0
PMS: 151C
CMYK: C0 M62 Y91 K0
Quick Connectors
CONNECTOR KITS
•Kits includes 2 solid copper silver plated contacts and housing
•Header card •Bagged
Gauge
Amp
Grey
Part No.
Red
Part No.
Blue
Part No.
2/0350
25-560825-5606 —
1/0175
25-561425-5612 —
2175
25-5618
—25-5616
4175
25-5622
—25-5620
650
—25-5626—
10 - 12
50
—25-5628—
100% black
25-5555
PRONGHORN
PCR/3304
Quick Connectors
CONNECTOR HOUSINGS
CONNECTOR CONTACTS
Amp
Grey
Part No.
Red
Part No.
350
175
50
25-563225-5630 —
25-563625-5634 25-5638
—25-5640 —
•Silver plated solid copper contacts •Sold as pairs
Blue
Part No.
Gauge
Amp
Part No.
2/0350
25-5652
1/0175
25-5654
2175
25-5656
4175
25-5658
650
25-5660
10 - 12
50
25-5662
100% black
PROTECTIVE CAPS
•Black PVC Material •Header card •Bagged
Part No. 25-5672, 350 amps.
Part No. 25-5674, 175 amps.
Part No. 25-5676, 50 amps.
CMYK: C5 M25 Y90 K0
CMYK: C45 M35 Y100 K0
PMS: 151C
CMYK: C0 M62 Y91 K0
FST/2155
FASTER®
Flat Face Couplings — High Pressure
Features: •Connection by screwing together the two100%
parts
black• Disconnection by pulling back
the female safety sleeve and unscrew •Shut off by flat valve •Connectable with male part
under residual pressure (35 MPa - 5075 PSI) without using tools •Disconnection under pressure allowed •Interchangeability according to Faster internal Standards •No spillage during
connection and disconnection •Female part equipped with axial rotation adapters •Mating
threads heat treated and made to Rd profile • High volume flow and reduced pressure drop is
ensured by specially designed components
Technical Specifications:
100% black
•FEMALE: high grade steel carbonitrited wearing parts.
CMYK: C5 M25 Y90 K0
MALE: high grade carbon steel induction hardened.
•Polyurethane and NBR Backup ring in PTFE
CMYK: C45 M35 Y100 K0
• -25°C to 100°C temperature range
•100,000 cycles at max rated working pressure disconnected
– 1,000,000 cycles at max. rated working pressure connected
Male
Female
FEMALE NPT
Size
Dash Inch
Thread Size
Max. Working
PSI
FHV-12-34-NPT-MFHV-12-34-NPT-F
-12
FHV-16-114-NPT-MFHV-16-114-NPT-F -16
FHV-24-112-NPT-MFHV-24-112-NPT-F -24
3/4” 3/4-14 F. NPT
1” 1¼-11½ F. NPT
1½" 1½-11½ F. NPT
6,650
5,075
5,075
FHV-12-34-SAE-M FHV-12-34-SAE-F -12
FHV-16-1-SAE-MFHV-16-1-SAE-F -16
FHV-24-114-SAE-MFHV-24-114-SAE-F -24
3/4” 1-1/16-12 F. ORB
1" 1-5/16-12 F. ORB
1½" 1-7/8-12 F. ORB
6,650
5,075
5,075
FEMALE ORB
(use this logo only when logo is small
or printing process dictates)
BAF/1305
BAFFIN
2 colour, reversed
Pantone 313
30% Screen Pantone 200
of Pantone 313
Pantone 281
(preferred
background)
Colorado Boot
100% black
Part No.
(use this logo only when logo is small
or printing process dictates)
3 colour
Pantone 313 Pantone 200
Pantone 281
0% black
12298 FNLBaffinLogoEN.ai
CMYK: C5 M25 Y90 K0
Size
REAC-M011-BK1-7 7
REAC-M011-BK1-8 8
REAC-M011-BK1-9 9
REAC-M011-BK1-10 10
REAC-M011-BK1-11 11
REAC-M011-BK1-12 12
REAC-M011-BK1-13 13
REAC-M011-BK1-14 14
•Temperature Rating: -40C/-40F •Liner: Removable,
multi-layer inner boot system •Base: Arctic Rubber Shell,
EVA midsole, Polar Rubber Outsole •Locking snow collar
•Diamond-weave, 900 Denier nylon upper •Multi D-Ring
lace fastening
CMYK: C45 M35 Y100 K0
AER/1037
EATON AEROQUIP
PMS: 151C
CMYK: C0 M62 Y91 K0
High Pressure Hose
EC210 WINNER® DOUBLE WIRE BRAID HOSE - SAE
100R2AT TYPE S, EN853, 2SN
Construction: Synthetic rubber tube, two wire braid100%
reinforcement,
and black synblack
thetic rubber cover MSHA approved.
Application: For hydraulic system service with petroleum and water-based fluids for
general industrial service.
Temperature Range: -40°C to 100°C
Part No.
EC210-4
EC210-6
EC210-8
EC210-12
EC210-16
EC210-20
EC210-24
EC210-32
Hose I.D.
O.D.
Max Operating Pressure
Min. Burst Pressure
Min. Bend Radius
Weight
bar
mm
inch
psi
bar
psi
mm
inch
kg/m
lb/ft
Dash mm
inch
-46.40.2515.00.59 400 5,800 1,600
23,200100.03.94 0.38 0.26
-69.50.3818.90.74 330 4,800 1,320
19,200130.05.12 0.54 0.36
-8
12.7
0.522.20.87 275 4,0001,100
16,000
180.07.090.640.43
-12
19.0
0.7529.21.15 215 3,125 86012,500240.09.45 0.93 0.62
-16
25.4
1.0037.21.46 165 2,400 6609,600300.011.811.29 0.87
-2031.81.25 47.3 1.86 125 1,800 5007,200420.016.54 1.89 1.27
-2438.11.50 53.7 2.11 90 1,300 3605,200500.019.69 2.10 1.41
-3250.82.00 66.7 2.63 80 1,150 3204,600630.024.80 2.76 1.85
23 L
OCA
TIO
NS:
ALBERTA
EDMONTON - MAIN
16215-118 Ave., T5V 1C7
Ph: 780-4-GREGGS or 447-3447
Fax: 780-451-2528
EDMONTON - EAST
3611 - 76 Ave., T6B 2S8
Ph: 780-450-2233 Fax: 780-450-2266
EDMONTON - SOUTH
3911 - 92 St., T6E 6R8
Ph: 780-409-2000 Fax: 780-409-2100
NISKU
1405 - 5 St., T9E 8C7
Ph: 780-979-9988 Fax: 780-979-9989
ATHABASCA
5006 - 52 St., T9S 1V3
Ph: 780-675-3110 Fax: 780-675-4774
CALGARY - MAIN
5755 - 11 St. S.E., T2H 1M7
Ph: 403-253-6463 Fax: 403-253-5926
CALGARY - FOOTHILLS
6130 - 51 St. S.E., T2C 4M9
Ph: 403-203-1928 Fax: 403-236-1912
CLAIRMONT
9802 - 84 Ave., T0H 0W0
Ph: 780-567-2238 Fax: 780-567-2239
DRAYTON VALLEY
6105 - 50 Ave., Box 5055, T7A 1R3
Ph: 780-621-0056 Fax: 780-621-0057
FAIRVIEW
9402 - 113 St., Box 2020, T0H 1L0
Ph: 780-835-5115 Fax: 780-835-3535
FORT MCMURRAY
325 MacAlpine Crescent, T9H 4Y4
Ph: 780-715-4000 Fax: 780-743-8833
!
n
g Soo
in
Com
ACHESON
101-53016 Hwy 60, T7X 5A7
Ph: 780-948-7111 Fax: 780-948-7222
GRANDE PRAIRIE
11140 - 97 Ave., T8V 3J8
Ph: 780-513-4000 Fax: 780-513-6000
HIGH LEVEL
10207 - 96 St., T0H 1Z0
Ph: 780-926-2521 Fax: 780-926-3514
RAINBOW LAKE
2 Rainbow Drive, Box 823, T0H 2Y0
Ph: 780-956-2588 Fax: 780-956-2589
RED DEER
5141 - 76A Street Close, T4P 3M2
Ph: 403-341-3100 Fax: 403-341-3210
SPIRIT RIVER
5202 Highway 49, Box 579, T0H 3G0
Ph: 780-864-3333 Fax: 780-864-3330
STRATHMORE
1020 Westridge Road, T1P 1H8
Ph: 403-934-3710 Fax: 403-934-5453
BRITISH COLUMBIA
FORT ST. JOHN
9404 - 111 St., V1J 7J5
Ph: 250-785-8000 Fax: 250-785-8022
LANGLEY
19632 - 96 Ave., V1M 3B9
Ph: 604-888-9588 Fax: 604-888-4688
NANAIMO
1935 Boxwood Rd., V9S 5X9
Ph: 250-754-1935 Fax: 250-754-1165
SASKATCHEWAN
SASKATOON
3066 Faithfull Ave., S7K 8H2
Ph: 306-343-6655 Fax: 306-343-6656
Items may not be exactly as illustrated. Quantities on some items may be limited.
Errors are subject to correction. ©2015 Gregg Distributors Ltd. All rights reserved.
pen!
O
Now
LETHBRIDGE
4005 - 5 Ave. N., T1H 6Y3
Ph: 403-328-7333 Fax: 403-328-7666

Gregg Distributors

Transcription

Similar documents

• Stamp- and forming technology • Welding in accordance with DIN

May - Typ356NE Home Page

steel construction

Parasound Halo JC 1 Monaural Amplifier

Ted Greene on Guitar Amps

High-performance welding

Mobile: a cashless wallet

ILSCO Irreversible Grounding Products Brochure

Fall 2012 Newsletter