VISSLO F2

Transcription

VISSLO F2
VISSLO F2
Specifications
Edging system
Patternless by built-in tracer
Beveling
Auto
Computer counted bevel
Controlled
Manual bevel setting from MENU
Flat
Rimless edging
3:7/4:6/5:5
Grooving
Auto
Computer counted groove positioning
Controlled
Manual grooving setting
Polishing
Flat / Bevel Polishing
Chamfering
Front , Rear, Both
Edging lens
Sort of materials
Glass,Plastic,Hi-index Plastic,Polycarbonate
Acrylic Resin,Trivex lens
Lens size
Less than 90 mm (diameter)
Layout range
Less than 110 mm (diameter)
Edging size
Flat edging
More than 17 mm (diameter)
Beveling
More than 19 mm (diameter)
Edging wheel
PL/PC Rough
Diameter 100mm/Width 17.5 mm
GL Rough
Diameter 100mm/Width 17.5 mm
Bevel/Flat
Diameter 100mm/Width 17.5 mm
Polishing
Diameter 100mm/Width 17.5 mm
Chamfering
Diameter 26mm
Grooving
Diameter 20mm
Water supply
system
Pump circulation or Direct connection to
tap water
Monitor
8.4 inch color LCD
Interface
RSC 232C 2 ports
Size of equipment
800(W)x440(D)x415(H)
Weight
50Kg
Power supply
AC 110V/220V,50/60Hz
Power consumption
Maximum 1.2KVA during edging
Specifications and design are subject to change without prior notice for improvement.
SUITE 301, APOLLO TOWN, 18-36,
SANBONDONG, GUNPO, KOREA
TEL:82-31-349-8692~4 FAX:82-31-349-8691
www.visslo.com info@visslo.com
3:7/4:6/5:5
3D PATTERNLESS LENS EDGER
Novelty, market-driven & innovative VISSLO’s 3D
patternless lens edgers declare new era of lens edging
3D PATTERNLESS LENS EDGER F2
Easier operation
1
2
3
Specific explanations turn up at the same LCD
screen and it makes operator check what’s the
edging condition and problems. Also more
simplified graphic menu system makes
operator free from complicated text base
menu operation. 1
25 inclined tracer makes
operator comfortable by
loading frame and get it
out of the tracer more
conveniently. 2
Latest touch
panel makes
operator free from
long operation
fatigue than
membrane switch
operation. 3
Faster edging
4
Latest and new DSP (Digital Signal processor) has
enabled edging speed more faster by speeding up the data
calculation and translation than RISC chip. 4
Powerfully elevated accuracy
5
1. main screen
2. tracer
3. touch panel
4. DSP
5. main PCB
Edging accuracy is elevated remarkably by using very latest
calibration skills by offsetting mechanical tolerances . 5
Novelty, market-driven & innovative Visslo’s 3D
patternless lens edgers declare new era of lens edging
6
7
9
8
6. pump
7. wheel
8. sliding cover
9. memory
Low maintenance
Dual pump system
This new system has enabled operator to be free
from stuck water problem than solenoid valve
system and succeeded to shorten maintenance
time and save costs.6
Edging is going on by switching the edging
position of wheels in turns at every edgings so it
could prevent the same side abrasion of wheels and
the life of wheels are extended tremendously.7
Operator may check present edging conditions and
problems more conveniently as front cover is open
because sliding cover and front cover is seperate. It may be
able to avoid trouble and useless time to open the machine.8
Enlarged data memory
The capacity of edging data memory are enlarged
to 120 addresses by 20%. 9