DOWNLOAD Product sheet AirSafe Twin

kraftwerk
The best decision for your flat roof
East/West: Kraftwerk AirSafe Twin
You are looking for a flat roof mounting
system which deserves no roof penetration at all, uses your roof efficiently, does
not harm your roof membrane, ensures
economical installation and has a life
time of more than 30 years?
Then you can build on AirSafe Twin!
Because AirSafe Twin fulfills all
above mentioned requirements and
many more!
AirSafe Twin is an aerodynamic system
made of aluminium. A specially developped connection sheet, broad contact
surfaces and the generator surface itself
protect the roof structure, the insolation
and the roof sealing against plasticizer
migration and high pressure charges.
10 Jahre
Garantie
kraftwerk
Through structural and aerodynamic
optimization the surface charge of an
installed PV system is only between
10 to 15 kg/m2.
The PV system can be declined by 10 or
15 degree and the alignment of the panels (framed or frameless) can be landscape or portrait. Through the optimized
rack ventilation AirSafe Twin impacts the
yield of the PV system very positively.
A lightning protection system can be
integrated as well, naturally.
AirSafe Twin is not only solid and safe
– it is also economical. Included are
integrated cable-in-conduits and cabling
runs underneath the panels. Through
the project-specifically produced and
at the same time pre-mounted panel
racks you save valuable time – for
your KRAFTWERK.
AirSafe Twin is tested in a wind tunnel
and provides a system stability certificate.
AirSafe Twin is certified for wind zones
1 to 4 and snow zones 1 to 3, locations of
a rough climate.
Made in Germany
Kraftwerk Solutions GmbH / Lindenstraße 76 / 53721 Siegburg / Germany
Fon +49.2241.26 15 090 / Fax +49.2241.26 15 099 / info@kraftwerk-solutions.com / www.kraftwerk-solutions.com