MOOG Problem Solver EN- Tie Rod End Failures - FME
Transcription
MOOG Problem Solver EN- Tie Rod End Failures - FME
B U L L E T I N : 2 7 0 4 6 Tie Rod End Failures www.moogproblemsolver.com 2001-2004 General Motors 1500/2500/3500 Trucks P RO B L EM : S O LU T I O N : OE tie rod ends failing prematurely due to boot failure MOOG® ES3609 • The boot fails, allowing contaminants and moisture inside. Resulting corrosion and wear cause excessive deflection in the tie rod socket assembly, with loose steering and associated toe angle changes. Tie rods with a non-serviceable polymer socket design are unable to flush the contamination, and corrosion/accelerated wear quickly sets in. • Boot failure is due to the reduction of carbon black strengthening filler in the polychloroprene material in order to achieve a blue color. Reducing carbon black content cuts material strength, resulting in boot degradation and failure. • The MOOG tie rod, featuring a greaseable design, uses a premium polychloroprene boot with a special grease-relief valve designed to resist intrusion and flush contamination out of the socket, preventing corrosion and premature wear. • Hardened powdered-metal “gusher” bearings allow lubrication to penetrate the bearing surface, providing the most durable bearing available for longer service life. • A full-ball stud maintains ball-to-bearing contact for greater load capacity. Note: Not all blue-colored boots are created equal. MOOG bellows-style boots (featured on other MOOG applications) are blue in color, but are manufactured from a premium urethane material. These boots will not degrade like blue polychloroprene. Patented cover plate Powdered-metal “gusher” bearing Belleville washer preload Sealed boot with grease-relief valve SILVERADO 2500HD 2WD 17,613 miles OE Outer Dust Boot Year Make/Model 2002-2003 2002-2006 2001-2003 2005-2006 2001-2006 2001-2006 2003-2006 2003 2007 2003-2007 2001-2006 2003-2006 2WD 2500 Avalanche 4WD 2500 Avalanche 2WD & 4WD 1500 Silverado/Sierra HD Crew Cab 2WD & 4WD 1500 Silverado/Sierra HD Crew Cab w/153 In. W.B. 2WD & 4WD 1500 Silverado/Sierra HD 2WD & 4WD 2500/3500 Silverado/Sierra 2500 Express/Savana Van w/8500-8600 lb. GVWR Express/Savana Van 3500 Express/Savana Van 2500 Yukon XL Hummer H2 Full-ball hardened stud Replacement Part Number MOOG BLACK POLYCHLOROPRENE BOOTS CONTAIN CORRECT RATIOS OF CARBON BLACK FOR LONG LIFE. ES3609 GREASE-RELIEF VALVE IS INDEXED TO KEEP LUBE AWAY FROM BRAKE COMPONENTS ©2015 Federal-Mogul Motorparts Corporation. NASCAR is a registered trademark of NASCAR, Inc. MOOG and The Problem Solver are trademarks owned by Federal-Mogul Corporation, or one or more of its subsidiaries, in one or more countries. All other trademarks are the property of their respective owners. All rights reserved. Form# MG27046
Similar documents
MOOG® PROBLeM SOLveR® CONTROL ARM - FME
Pontiac G5 10-07; Grand Am 05-00; Pursuit 06-05; Sunfire 05-95; Saturn Ion 07-04; Ion-1 05-03; Ion-2 07-04; Ion-3 07; Lexus ES300 01-92; Toyota Avalon 01-95; Camry 01-92
More informationMOOG - Full Product Line
No matter what the service occasion, MOOG provides the components needed to restore like-new steering and handling to today’s vehicles.
More information