1990 edition 2
Transcription
1990 edition 2
Marine & Offshore Technology S C H 57STE JAARGANG NR 2 I P m W E R F FEBRUARI 1990 Rotterdam ATLAS MAXI SLUDGE AND WASTE INCINERATORS For Marine and Off-shore Installations Meet the Marpol regulations in an easy way! Install a Maxi Incinerator - and forget about sludge tank - and solid waste storage capacity. Compact U nit Design Advanced Com bustion Technique • All pumps included • Control panel included • Flue gas ejector eliminating necessity of flue gas fan • Forced air cooling of shell • Large solid waste combustion chamber • Easy installation • Long flue gas retention time (0.5 -1 .0 sec.) • High combustion temperature (850-1100'C.) • Clean flue gases • Low flue gas temperature (250'C.) • Low ash content Fully Autom atic Operation O ptional Extras • Designed for UMS • Optimized fuel economy • Automatic shut-down functions • Simultaneous combustion of solid waste and sludge • Sludge tank with mill pump • Sluice for continuous feeding of solid waste (100L bags) • Heat recovery system A tla s M axi 25 S A tla s M axi 2 5 SL A tlas M axi 50 S A tla s M axi 50 SL A tlas M axi 150 S A tla s M axi 150 SL Combustion capacity kW/h 115 115 375 375 930 930 Combustion capacity Kcal/h 100.000 100.000 320.000 320.000 800.000 800.000 Max combustion of solid waste - kg/h 30 30 100 100 250 250 Max combustion of sludge oil (Max 60% water) - L/h - 20 - 50 - 120 1340 1340 1890 2440 1845 2080 0 260 600x600 3000 1890 2440 2000 2080 0 260 600x600 3200 2565 3195 1925 2215 0 300 600x600 4300 2565 3195 2110 2215 ) 300 600x600 4500 T y p e o f In cin e ra to r Dimensions/mm Length (L) Length (L1), with sluice Width (W) Height (H) Diameter of chimney Charging door opening Weight: kg appr. - 1280 2220 0 200 900x500 2200 — 1280 2220 0 200 900x500 2300 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. Venteville B.V., Annastraat 2, P.O. Box 4226, 3006 AE Rotterdam Telefoon: 010-4140411* Telefax: 010-4114470, Telex 23750 Bank ABN: 50.40.31.333 Postbank: 686496 venteville bv Charging Door Combustion Chamber Afterburning Chamber Ash Cleaning Door Auxiliary Burner Air Blower Ejector Thermocouples Sludge Burner Sight Glasses Damper Double Wall for Air Cooling Combustion Air Inlets Oil Pump Sludge and Waste Oil Inlet Sludge Tank Mill and Circulation Pump Heater Compressed Air (only for Sluice and Sludge Burner) Sludge Dosing Pump M arine & O ffsh o re T echnology 'Schip en W e r f is het officiële orgaan van de N e derlandse Vereniging van Technici op Scheepvaartgebied, H et Maritiem Research Instituut Nederland MARIN, De Vereniging Nederlandse Scheepsbouw Industrie VNSI en de Afdeling Maritieme Techniek van het K lvL Marine & Offshore Technology Verschijnt maandelijks S Redactie C H I P e n W E R F Dr. ir. P. van Oossanen, Dr. ir. K. J. Saurwalt, Ing, C. Dam en J. M. Veltman Redactie-assistentie: W hen the largest port in the w orld celebrates it ’s 650th anniversary then Mevr. S. van Driel-Naudé. it surely calls for a m a ritim e jo u rn a l w ith i t ’s roots in the same port to Redactie-adres m a rk the occasion. Therefore, this special issue ofS chip & W e rfis Mathenesserlaan 185 3014 H A Rotterdam telefoon 0 10-4 3 6 1042 fax 010-4364980 dedicated to this celebration. This num ber contains articles which provide historical insight on developments on ship building, shipping and ships related to Rotterdam - V o o r abonnem enten en losse num m ers in other words the past, the present but also the future are discussed. Uitgevers W y t & Zonen b.v. Pieter de Hoochweg 111 3024 BG Rotterdam Postbus 268, 3000 A G Rotterdam telefoon 0 10-4762566* telefax 010-4762315 telex 21403 postgiro 58458 Interesting are the articles about m a ritim e industries and trades tra ditio n ally associated w ith Rotterdam and an im portant contributing factor to its growth. We w ould like to thank the authorities who were so kind as to w rite an introduction for this special issue ofS chip & W e r f and also give a word o f appreciation to the publisher. A d v e rte n tie s Geldend advertentietarief I januari 1990. BURO JET BV Postbus 1890, 2280 D W Rijswijk. Telefoon 070-3990000* Fax. 070-3902488 W ith this edition we pay our respects to the city o f Rotterdam : it has been the hom e base o f the Netherlands Society o f M a rin e Technologists since 189 8 and Schip & W e r f has been published in Rotterdam since it was started in 1934. A b o n n em e nten 1990 Because o f the special character o f this issue we w ould like to point out Jaarabonnement ƒ 82,25 buiten Nederland ƒ 131,— losse nummers ƒ 8,75 (alle prijzen incl. BTW ) Bij correspondentie inzake abonnementen s.v.p. het 8-cijferige abonnementsnummer vermelden. (Zie adresdrager.) th a t the opinions expressed by the guest authors are th e ir own and do not V o rm g e vin g en d ru k D rukkerij W yt & Zonen b.v. necessarily reflect those o f the editors or the publisher. The editor V7 ^HOfN/vak ISSN 0036 - 6099 Inhoud Strong involvement 55 The Netherland’s shipbuilding industry 108 Shell Tankers B.V. 136 Cooperative e ffo rt required 56 Courage and vision 57 Electronic controls fo r the thrusters on the swops vessel ’seillean’ 112 Rotterdam 650 years 57 From Vuyk shipyards to Vuyk engineering Van Ommeren: Already actively involved in Rotterdam's Maritime history fo r 150 years 139 114 From bo tto m ry to ship's mortgages 146 Ships to our ow n formula 117 A piece o f history 148 Smit International heading fo r the future 122 INA: Electronics in shipping and traffic monitoring 151 RDM 124 O ld experience w ith new facilities 153 Verolm e Botlek, past, present and future Ships that pass in the night 154 126 News 156 Vlaardingen O ost Shiprepair 130 Verenigings Nieuws 156 Litarature 159 Introduction Kivi, Rotterdam and the technology Shipping and shipbuilding in Rotterdam throughout the centuries Rotterdam-Main p o rt o f W estern Europe DSS Rotterdam Shipbuilding and the trade unions The development in ship design from w o rld war II to the present SenW 57STE IA A R G A N G N R 2 58 61 63 71 82 92 W ilton-Fijenoord: A unique combi nation w ith a glorious history 95 132 53 HOLEC KH^DOOHMfp^CC Aandrijfsystemen en voedingsystemen voor Offshore en Specialty - ships Holec H Ridderkerk Holec Machines & Apparaten b.v. Postbus 4050 2980 GB Ridderkerk tel.: 074 - 465 465 fax.: 074 - 465 444 A54 STRONG INVOLVEMENT By Drs. R. den Dunnen, Alderman o f Port and Economic Development As alderm an o f Port and Economic A ffairs o f Rotterdam, it is gra tifyin g to note the strong involvem ent fe lt by the Netherlands Society o f M a rin e Technologists w ith the 6 5 0 th anniversary o f our city. This is convincingly dem onstrated by the fact th a t the m agazine for m a ritim e technology 'Schip en W e r f has devoted this m onth to a special issue centered around the them e o f 6 50 years o f developments in the broad fie ld o f shipping and shipbuilding. Developm ents o f the past 6 5 0 years... the editors have em barked on w hat is certainly an am bitious, but no easy task. W hen I consider the changes in and around the port o f R otterdam o f the past 15 or 2 0 years, these alone would be sufficient to p ll a num ber o f im posing volumes. The readers o f this m agazine are ju s t as aware o f this as I am; shipbuilding in the Rotterdam region has declined strongly and the social and economic im p a ct o f this on the area has been so drastic th a t the traces w ill rem ain visible fo r a long time. The changed appearance o f the cargo - the containers, u n it loads, new bulk packages - has also had far-reaching consequences. N o t only in the field o f shipping (there was no such thing as a container ship a few decades ago), but also as regards the nature and am ount o f em ploym ent in and around the port o f Rotterdam. W hen I look a t the past eight years, the period in which, as alderm an, I have been strongly involved w ith the developments in the port, these years alone w ould supply enough m ate ria l fo r a good-sized special them e issue. The editors do not only w ant to look back on the past 6 5 0 years, but also devote a tte n tion to the present and to future developments in this issue o f'S c h ip en W e rf. I am certain th a t this w ill com bine to form an issue o f exceptional interest, and one which I feel no hesitation in recom m ending to the reader. SenW 57STE IA A R G A N G N R 2 55 COOPERATIVE EFFORT REQUIRED By Prof, Ir. S. Hengst, President Netherlands Society o f Marine Technologists P ort, shipping and shipbuilding go hand-inhand in R otterdam . The Netherlands Soci e ty o f Marine Technologists (N VTS), w ith this issue o f ’Schip and W e r f has joined the ranks o f those sending th e ir best wishes to R otterdam and congratulations on its 650th anniversary. The NVTS is an association w ith many con trib u to rs and members w h o are active and employed in, around and near the p o rt and w ho are hence d ire ctly affected by the ups and downs o f the greatest p o rt in the w o rld. This issue o f ’Schip en W e r f reflects this involvement. The reader w ill find, in addi tio n to a num ber o f articles on companies active in the field o f shipping, shipbuilding and shiprepairs in R otterdam , a num ber o f contributio ns describing the technological developm ents o f the past decades. Ship types and designs alte r in tim e, but have been subject to enorm ous changes espe cially since the second w o rld war. A num ber o f innovations w e re achieved thanks to Dutch, and especially R o tte r dam-based, companies. T h e p ast 100 years T hroug hout the past 100 years, R o tte r dam has played an im p o rta n t role in the flourishing g ro w th o f shipping and ship building in the Netherlands. Vision and determ ination - Pieter Caland’s N e w W aterw ay was com pleted in 1868 but was only opened fo r use fo urteen years later, in 1882 - gave free and open access to the sea, and allow ed ir. G. J. de Jongh, d ire c to r o f the Stadstimmerhuis, to develop concepts fo r the developm ent o f an international p o rt, which w e re then realized. Visions which w e re n o t always shared by the merchants and bankers o f Rotterdam , and w hich w e re regularly in danger o f failure due to a lack o f funds. The opening o f the N e w W a te rw a y and the transition fro m sailing ships to steamers gave entrepreneurs like B art W ilto n o p portunities to initiate the developm ent o f shipbuilding and shiprepairs in this p o rt. The above mentioned characteristics also played a part in the preservation o f the shipbuilding and shipping industry during the depression o f the thirties. A n example is the construction o f the ’N ie u w A m s te r dam ’ by the Rotterdamsche D ro o g d o k Maatschappij fo r the Holland Am erica Line. The RDM w o rke d to g e th e r w ith a num ber o f yards including W ilto n -F ije noord, Piet Smit and the KMS and com panies such as W erksp o o r. O n Sunday 20 March 1938, the N ieuw e Rotterdamsche C ourant w ro te in th e ir m orning edition 56 under the heading ’Several economical considerations’ among o th e r things, the follow ing: 'Possibly th e re was never a ship that, even before the plans became definite, stirred so many pens in to m ovem ent, so many tongues in to speech. D utch shipping was in the grips o f a fierce depression, the D utch business w o rld was in dire straits, the yards, o u r shipyards, w here the song o f the electric hammers testified to the hard w o rk carried o u t along o u r rive r, had fallen silent o r w ere occupied only w ith m in o r repair w o rk , w hen the idea o f building a sister ship fo r the Statendam was con ceived... W e can only state th a t the gov ernm ent and all w h o made offers to stim u late the stricken industrial w orld... by awarding this o rd e r to the jo in tly o p e ra t ing D utch shipyards, have, up to the p re sent, had no cause to re g re t that offer. It as as if w ith this o rd e r, th a t tim es have been turned around.’ A fte r summing up th e production o f the shipyards during the boom years and the years o f the depression, the relationship trade-shipping-shipbuilding, the revival, in w hich th e author states th a t 'em ploym ent is the m ost d ifficu lt problem confronting the national, provincial and municipal gov ernm ents’, an a tte m p t is made to draw up an inventory o f b oth the measurable and unmeasurable aspects. And this is w here the position o f the p o rt o f R otterdam especially plays a role. The disappearance o f the passenger services fro m R otterdam to the Am erican east coast w o u ld (accord ing to the calculations o f H enri Reuchlin) ’have meant a loss o f Dfl. 1,375,000 to the public purse. This disaster has now been averted. And w ith it, a disaster fo r the prestige o f Rotterdam , a disaster, to o , fo r the to u ris t industry (!), tradespeople e tc .’ notes the N R C contentedly. The preservation o f knowledge, capacity and prestige undoubtedly c o n trib u te d to the realization o f another re cord produc tio n o f the D utch shipping and shipbuilding w o rld 20 years later: the construction o f the 'R otterdam ', also by RDM. A n involuntary comparison betw een the th irtie s and the present situation is ines capable: unem ploym ent, sharpening com p e titio n in shipping and the shipbuilding in dustry, political changes have once again made th e ir appearance. The m a rke t e x pectations are looking up. A fte r a period o f decline in shipbuilding, the prospects fo r the fu tu re seem reason able. The knowledge and infrastructure are still intact in the Netherlands. B ut n o t only can this be applied to benefit fro m the revival o f the traditional m aritim e markets, new developm ents have emerged as well. M ore than ever w ill it be necessary fo r R otterdam to be able to o ffe r com petitive, energy-saving and environm entally safe methods o f good transportation on w ater. The N etherlands can o ffe r b oth expertise and a w ide range o f possibilities in the area o f transit and distribution. The com bination sea navigation-inland navigation-rail-road-air must be op tim ized, a process in which R otterdam can occupy a key position w ith the accumu lated experience it has at its disposal. R ot terdam should use the available (m aritim e) know ledge and capacity to develop long te rm plans fo r the fo llo w in g century in the field o f air, sea and inland shipping ports and the accompanying infrastructure, to enable the Netherlands to retain and rein force th e ir position as key transit and dis trib u tio n country. It can only be hoped th a t this vision w ill be shared in governm ent circles in The Hague, as it seems that, once again, a cooperative e ffo rt w ill be required. SenW 57STE jA A R G A N G NR 2 COURAGE AND VISION By W. R. van de Kerkhof, Director ofW yt & Zonen, Publishers It is w ith some hesitation th a t we, the pub lishers o f ’Schip en W e r f , have decided to comply w ith the request o f the e d ito rs to add a co n trib u tio n to this special edition com m em orating the 650th anniversary o f the p o rt o f R otterdam . A journal which this year has gone into its 57th year. As already mentioned: w ith a certain hesitan cy, since 57 years is little m ore than a blink o f an eye when set against 650. The fact, however, that ’Schip en W e r f, th ro u g h o u t the years o f its existence, has always suc ceeded in providing first-ra te technical in form ation and, m oreover, has its home p o rt in Rotterdam , has given us the co u r age to accept the request. Technical inform ation on shipbuilding and shipping. Areas which are probably m ore sensitive to economic conditions than any o th e r industrial branch, and which are fre quently considered a yardstick fo r the economic situation o f the w o rld . An economic barom eter w hich registered, during the firs t year o f its appearance, the w o rs t depression the w o rld had ever seen. A t that tim e, a sixth part o f the to ta l w o rld m erchant fle e t was laid up. That neverthe less a new journal was launched was a tes tim o n y to the courage and vision o f its founders. A com plim ent, to o , fo r the N.V.T.S., w ho have continuously been successful in a t tracting an e x p e rt ed ito ria l staff fo r its o ffi cial publication. So th a t ’Schip en W e r f has indeed become the magazine envisioned by the e d ito r in chief when the firs t issue was introduced on January I I 1934: 'N o t a te x t bo o k in disguise published in parts, but a practical magazine containing clear, readable articles on im p o rta n t subjects, new constructions o r n o te w o rth y points o f interest to keep readers up to date on technological developments, in so far as these are related to shipping o r ship con stru c tio n .’ This form ula has been consis te n tly adhered to , an approach w hich has found response, as evidenced by the read ership o f ’Schip en W e r f, which is far m ore extensive than the members o f the associ ation. A nd fo r this reason, we w ould like to con clude w ith the final w ords o f the e d ito r in chief in the in tro d u ctio n to th e firs t issue: 'May "Schip en W e r f ' continue on a course which is prosperous, beneficial and useful, as w ell as a steady one’. That this wish may also be fulfilled fo r the p o rt o f R otterdam goes w ith o u t saying. ROTTERDAM 650 YEARS By Dr. Ir. M. W. C. Oosterveld, Director MARIN terdam owes its developm ent in to the largest p o rt o f the w o rld to its location on the w aterw ays which gave the great in dustrial areas o f Europe access to the sea. The p o rt o f R otterdam has always strongly stimulated the D utch m aritim e sector, w hich has led, among o th e r things, to w o rld w id e recognition o f the exceptional level and pioneering nature o f m aritim e re search in the Netherlands. The Netherlands is as described by many a country o f polders, dikes and canals. O v e r half o f D utch te r rito ry was reclaimed fro m the sea o r lies below sea level and is p ro tected by dikes. This natural affinity w ith the sea has prom o ted the developm ent o f a long and rich tra d itio n o f shipbuilding and shipping. The shipping industry included the transportation o f goods on D utch in land w aters as w ell as betw een coastal har bours and across the sea o f the w o rld . R o t SenW 57STE jA A R G A N G N R 2 The foundations fo r naval architectural re search w e re laid by W illiam Froude, an En glish marine engineer w h o developed a m ethod which made it possible to scale up im p o rta n t derived design c rite ria fo r ships to full-size, based on the results fro m m od el studies. This was essential because at the tim e the transition was being made fro m sail ships to mechanically-propelled vessels and fro m w o o d to steel ships, the k n o w h ow in ship design was lacking. The firs t shipbuilding testing station was founded by Froude in 1870, in Torquay, England. The N etherlands fo llow ed suit in 1873, when, using a section o f the Navy D ock in the R ijksw erf in Am sterdam , facilities w ere b u ilt fo r testing ship models. This became the second shipbuilding testing station in the w o rld . The initiative fo r the construc tio n o f this testing station was taken by D r. B. J. Tideman, then head engineer o f the Royal Navy. A fte r the firs t testing station in the N etherlands had become outdated, the governm ent and fo u r large shipowning companies to o k steps to launch the con stru ctio n o f a new testing station. This led to the foundation o f the Netherlands Ship building Testing Station in Wageningen, the name o f which, after the m erger w ith the N etherlands M aritim e Institute in R o t terdam , was changed to the M aritim e Re search Institute o f the N etherlands (M A R IN ). Originally, th e research perform ed by the 57 M A R IN was targeted at optim ising the vessel shape and the p ro p e llo r in stationary w a te r o f unlim ited extent. Later, o th e r as pects stated to play a role in ship design, such as the behavior o f the ship at sea, man ageability, the influence o f re stricte d wa te r and p ro pellor cavitation. The offshore industry, the production o f o il and gas at see, also started to demand the atte n tio n o f the research institutes. Many o f the re search commissions came fro m R otterdam shipyards o f shipowners. N e w research areas em erged because the operational aspects o f ship and offshore constructions and problem s concerning waterways and p o rt design increasingly made the need fo r m ore scientific research clear. It is especially due to these develop ments th a t the M A R IN has been able to p e rform so many services fo r the p o rt o f R otterdam . T here are many aspects w hich come into play regarding ship manouvering in po rts and w aterw ays, and the ship features enabling this to be carried out. W ith res pect to th e sailing characteristics o f ships, determ ining the inherent manouvering characteristics is the firs t step. These characteristics are fixed as soon as a ship has been built and are subsequently hard to change. In ships which have been taken into operation, a distinction can be made be tw een the ship itself and the ship in relation to po rts and waterways. In the case o f the ship itself, questions arise such as: w hat navigation instrum ents are required on board, w hat are the requirem ents to be m et by the nautical equipm ent regarding the operation thereof, w h a t are the conse quences o f cre w rationalization fo r the tasks on board, is reduction sensible and under w hat conditions? The interaction betw een sh ip -p o rt deals w ith m atters such as: th e dimensioning o f ports and waterways, b oth horizontally and vertically, determ ining the conditions under w hich operations should be halted in a p o rt, traffic divergence systems and tra f fic m onitoring in w hatever form . In providing the services m entioned, an im p o rta n t role is played by numeric simula tio n models o f the man-ship-system, man ouvering sim ulators and traffic service simulators. The firs t real-tim e sim ulator w ith a 360° o u te r image was taken in to use by the M A RIN at the beginning o f the seventies. O riginally, the research perform ed w ith the use o f this sim ulator was strongly orie n te d tow ards the problem s o f navigat ing e xtre m e ly large ships at sea and in the approach routes to ports. Extensive use was made, fo r the firs t tim e o f m anouver ing simulators in the original design o f the entrance channels to R otterdam . Later, the manouvers in the harbours themselves w e re added, such as swinging around, m ooring and unm ooring assisted by tug boats, navigating an prim arily visual in fo r mation such as in Australian ports, calling at buoys and storage tanken in offshore, navigating Canals, such as the Suez and the Panama Canal, manouvering w ith ferries, passing bridges w ith vessels sensitive to wind and the navigation o f barges. In addition to research applications, simulators are becoming increasingly im p o rta n t tools used in training personnel. The sim ulator is used especially fo r training experienced persons, such as ship masters, mates and pilots. There is no denying that the intensive use which the R otterdam p o rt and sea pilots in particular have made o f the sim ulators has been an im p o rta n t fa cto r in the safe and fast management o f shipping traffic. It was also gratifying to note the recent decision o f the M A R IN and the W L to join forces and combine th e ir activities in the sim ulator field. This com bination could lead to the construc tio n o f an advanced type o f manouvering sim ulator fo r w hich th e re is a great need in the Netherlands. The combined k n o w ledge o f both institutes in the area o f p o rt and w aterw ay research is a garantee that the leading position held by the N e th e r lands in this field w ill be preserved, w hich is all to the good fo r D utch ports! A t the same tim e, M A R IN and W L have also looked around fo r o th e r possible coopera tio n partners in the N etherlands (Educa tion, Municipal P o rt Mangagement in R ot terdam , M inistry o f Defense) in o rd e r to set up an optim um ’sim ulator infrastruc tu re ’ and task demarcation. Many kinds o f tra n p o rta tio n streams meet in ports. T o im prove the safety and effi ciency o f the shipping traffic related to these transportation streams, a shore sup p o rt system using radar was introduced in the fifties. This support has gro w n into a traffic m o n ito rin g system know n as the Vessel T raffic Services (VTS). The VTS sys tems in the Netherlands are in the process o f being m odernized and the new VTS sys tems in R otterdam and on the W esterschelde w ill be equipped w ith highly sophisticated radar equipment. In 1985, the M A R IN was commissioned by the D i re cto ra te General o f Shipping and M aritim e Affairs to develop and build a training sim ulator fo r the traffic service. This sim ulator is at the M A R IN in Wageningen and has been used intensively fo r th re e years. The M A R IN strives to ensure th a t the re quired knowledge, expertise and research facilities w ill continue to be available in the future. Establishing good cooperative ties w ith im p o rta n t users o f research results, which certainly includes the p o rt o f R ot terdam , is vital. Many sophisticated p ro jects have been carried out, such as ad vanced training programs and the previ ously mentioned research involving the Eurogeul, the research on 'Restricted D raught’ tankers etc., to m ention but a few, yet all have c o n trib u ted to the cu r re n t level o f knowledge at the M A R IN and o th e r institutes. The M A R IN w ould like to wish the p o rt of R otterdam the very best fo r the future, and hopes to continue to be able to c o n tri bute to its thriving developm ent. INTRODUCTION By W.J. Ter Hart Chairman o f the Netherlands' Shipbuilding Industry Association (VNSI) A lthough deminished in im portance, the R otterdam harbour is still a m ajor centre o f shipbuilding and shiprepairing in N o rth 58 W e st Europe. The R otterdam area, when defined as stretching o u t fro m The H o o k o f Holland to G orinchem , also remains the main centre o f the D utch shipbuilding and shiprepairing industry. In this area about th re e quarters o f the SenW 57STE jA A R G A N G N R 2 DIGACO B.V. scheepsreparatie en konstrukties SHFCRANES Ringdijk 404 - P.O. box 318 2980 AH Ridderkerk - Nederland Tel.: 0 1 8 0 4 -1 5 1 5 5 -Fax: 01804-11343 Telex: 28527 Diga NL | Bouw- en reparatiehal 100 x 25 x 14 mtr., hijscap. 140 ton | Nieuwbouw van scheepsluiken | Alle staalreparaties, onderhoud, ombouw, vernieuwing, sectiebouw | Machinekamer- en pompkamerreparaties | Reparatie, onderhoud van alle typen scheepsluiken, laadbomen, lieren etc. | Zware staalconstructies | Zeevasten speciale ladingen | ’IN PORT’ reparaties we design and build special cranes for: seagoing ships « d re d g e rs • ” on-off-shore” use such as: • • • • DECKCRANES TRAVELLING GANTRY DECKCRANES COLUMN CRANES OVERHEAD TRAVELLING+ENGINE* PU M PR 00M CRANES special test equipment for complete cranes up to 500 tm — voor industrie en scheepvaart Complete perslucht installaties. M. HAM B.V. TEL. 010 -4 2 9 75 77 EMHA technisch bureau b.v. TEL 01 0 4 2 9 0 6 66 POSTBUS 5 9 0 0 0 .3 0 0 8 PA ROTTERDAM, SLUIS JESDIJK 4 1 ,3 0 8 7 AD ROTTERDAM __________ TELEX 2B547 HATEB HL - TELEFAX 3 :0 1 0 - 42 9 77 37 C BUITENDIJK GROEP 78 Lindtsedijk - 3336 LE Zwijndrecht - Holland Telephone 078 - 101622 . Fax 078 - 103578 shiprepairing tu rn o v e r is realized, w hilst about half o f the newbuilding o f sea going vessels is taking place here. A fte r a num ber o f years o f reductions and yard closures, the general situation in the N etherlands’ shipbuilding and shiprepair ing industry has im proved considerably. This general statem ent also applies fo r the many yards in the R otterdam area, w here the d iffe re nt companies are w o rkin g hard to stimulate the continuation o f the p re sent recovery. In this process the existing good rela tio n ship w ith the R otterdam Municipality A u th o ritie s and w ith the H arbour A u th o ritie s is o f great im portance, in a city w hich is rapidly and successfully developing itself, its harbour and infrastructure and is pushing fu rth e r ahead to make itself ready fo r the challenges o f the nineties. In the fo llo w ing paragraphs a sh o rt review is given o f the d iffe re n t sections o f the Netherlands' shipbuilding industry as a w hole; in the co n trib u tio n o f mr. G. de Vries Lentsch the R otterdam yards are fu rth e r investigated. N e w b u ild in g o f seagoing ships The present o rd e rb o o k o f the average newbuilding yard gives it full occupation until the last m o n th ’s o f 1990 o r first m o n th ’s o f 19 9 1. This situation arised as a result o f the o rderwave o f the past 12 months. This suc cess was the com bined result o f the im proved shipbuilding subsidy scheme, the im proved m arket, the effective D utch shipow ner’s investm ent prem ium system but also the high com petitiveness o f the D utch yards. The figures o f the o rd e r intake o ve r the past 5 years are as follows: to lo w e r the aid ceilings o f the 6th EEC D ire ctive only w ith 6 percent points resp. w ith 2 percent points to 20% resp. 14% is to the view o f the D utch shipbuilders very disappointing, a fu rth e r dip w ould have been justified. As a result o f this decision the shipbuilders and shiprepairers despite th e ir m ost com p etitive cost price level, w ill again have to ask fo r a subsidy scheme w hich w ill put them in a comparable co m p etitive position w ith th e ir surrounding rivals. R e p a irin g o f seagoing vessels m ent prem ium fo r D utch shipowners (IPZ). Looking at the developm ent o f m anpow er capacity in the N etherlands o f yards build ing seagoing vessels during the past 5 years, a reduction o ve r this period o f 54% can be registered, but a stabilizing tenden cy can be noted fro m 1987 onwards. Table 2. N u m b e r o f people em ployed in shipbuilding o f seagoing vessels at 3 1/ 12 1984 7.600 1985 6.400 1986 5.400 1987 3.600 1988 3.500 The situation per end 1989 is estimated at about the same level. This strategical m inim um shipyard capacity w hich survived has proved to be one o f the fitte s t in Europe and in the w o rld , coping Table I . T otal o rd e r intake o f sea going vessels > 100 gt year tonnage in C G T e x p o rtshare value in mln Dfl exportshare 1984 1985 1986 1987 1988 1989 288.525 337.245 121.600 178.800 324.420 358.170 33% 34% 29% 28% 29% 50% 1.250 1.284 547 674 1.344 1.313 32% 38% 39% 25% 26% 60% As in 1988 the to ta l deliveries amounted to 16 4 .0 17 C G T , the o rd e rb o o k per end 1988 g re w to 453.786 C G T ; the situation per end 1989 was even higher: 581.769 C G T, in money term s 2.245 mln D fl. It is rem arkable how much the e x p o rt share has increased in 1989; this m ight be the com bined e ffect o f the im proved in te r national m arket and the reduced invest60 w ith the disadvantage o f having to find profitable w o rk in a to ta lly d isto rte d m ar k e t in which the subsidy-war is raging. The present possibilities o f the D utch yards to continue contracting orders are lim ited because o f the fact th a t the yards are awaiting additional funds fo r the ship building subsidy system. The decision o f the European Commission The yards active in this m arket have e x perienced 1988 as a difficult year, far less troublesom e ho w e ver than the almost disasterous year 1987, in which a reduction in m anpow er o f 30% was recorded. In the course o f 1988 still a fu rth e r reduc tion was realised, now o f about 15% in m anpow er and 10% in tu rn over. For 1989 how ever, an upturn is expected o f no less than 12% in tu rn o v e r w hile the w o rk fo rc e remained stationary. This last phenomenon resulted in an increase in the sub-contracting o f the e x tra w o rk ob tained. The developm ent o f the aggregated tu rn o v e r and w o rk fo rc e em ployed at the yards in this category, presently 12, was as shown in table 3. Several tim es the D utch shiprepairers asked th e ir G overnm ent fo r subsidies fo r im p o rta n t shipconversion projects, as is al low ed under the EEC D ire ctive and is granted fo r instance in the Fed. Rep. o f Germany. Up to n o w the D utch G o vernm ent simply refused to comply w ith this request fo r reasons o f principle (no extension the sub sidy system), fo r reasons o f restructuring, as w ell as fo r budgettary reasons. The shiprepaires decided n o t to persist under the present system b u t to loo k fo r new concepts and new m arkets outside the d ire c t shiprepair field. A t present the 12 yards are using th e im proved shiprepair m a rke t to stabilize th e ir capacities and to prepare fo r a closer co operation betw een themselves. This should enable them to b e tte r cope w ith the problem s o f a reduced capacity and the continued fluctuations w hich have always characterized the shiprepair market. They also jo in tly seek solutions fo r the g ro w in g national and international con cern fo r environm ental problems, result ing in new o r m ore severely maintained laws and regulations, seriously threatening the operations o f th e repair industry in various aspects. B u ild in g and re p a irin g o f s m a lle r vessels These are o fte n smaller yards which build and repair small seagoing vessels, harbour SenW 57STE jA A R G A N G NR 2 R o tte rd a m 1990 Table 3. T u rn o ve r and to ta l w o rk fo rc e in repair o f seagoing vessels year tu rn o v e r in mln Dfl e x p o rtshare w o rk fo rc e 1984 1985 1986 1987 1988 1989 530 646 652 395 350 (400) 66% 75% 65% 66% 70% — 4.400 4.020 3.890 2.700 2.300 (2.375) (estimations) Table 4. O rd e rs received fo r smalller ships ( < 100 gt), outside the Lloyd’s statistics year 1984 1985 1986 1987 1988 1989 to ta l number o f ships I4 I 280 222 145 155 (109) tugs and o th e r service cra ft as w ell as in land w aterw ay vessels. The general situation in this category o f mainly non-subsidized yards is d ifficult but still reasonably well, although the lack o f subsidies in markets d isto rte d by the in te r national subsidy w ar is n o t w ith o u t conse- value in mln D fl e x p o rtshare (value) 344 376 230 170 155 (210) 49% 69% 49% 44% 73% 37% quences. Looking at the o rd e r intake o ve r the past 5 years o f ships n o t falling in the definitions o f th e international statistics, also here considerable loss o f business can be noted, (table 4) The smaller yards specialized in cargo-ves- sels fo r inland navigation experienced fierce c o m p e titio n fro m the C om econ countries like Poland and Yougoslavie some dozens o f hulls fo r several types w e re ordered fo r D utch account. F urtherm ore the EEC Regulation aiming at a structural reduction o f capacity o f the European inland fleet w ill have its sh o rt te rm negative effect o f the newbuilding m a rke t fo r such inland w aterw ay vessels. The 'old fo r ne w ’ system w ill be a m ajor factor aimed a t stopping the entrance o f new tonnage to the fleet; old tonnage o f a corresponding volum e w ill have to be scrapped o r a penalty equal to the scrap ping prem ium w ill have to be paid. The shipbuilders are in favour o f this regulation, b u t in the short te rm it w ill create a very d ifficu lt m arket fo r the builders, but p ro b ably some possibilities fo r the repairers. Possibly the im provem ent o f the interna tional shipping and shipbuilding m arket w ill create some m ore room fo r these smaller yards, w hich have been affected by the e x p lo ra tio n o f th e ir ow n m arket by the big ger yards, resulting in a smaller w orkload and a dow nw ard pressure on prices. C on clusion The overall picture o f the D utch Shipbuild ing Industry in all its diffe re nt sectors is th a t o f a battered fortress which has suf fered many losses, but the s p irit w ith in its walls is full o f hope and determ ination to survive and prosper again. KIVI, ROTTERDAM AND THE TECHNOLOGY By Ir. A. P. A. Jaeger, Chairman Klvl-MARTEC W ith pleasure I have accepted th e invita tio n o f the e d ito rs o f 'Marine & O ffshore Technology - Schip en W e r f, to w rite an in tro d u c tio n on behalf o f K lvl-M arTec to com m em orate this special issue to the celebration o f 650 years R otterdam . As w e are in th e 1990’s I feel free to wish you and the yours a happy, healthy and suc cessful s ta rt o f the last decennium o f the ce n tu ry o f technology. I do hope th a t o u r jo in t e ffo rt in th e journal 'Schip en W e r f may fu rth e r develop to the benefit o f o u r m em bers and th a t K lvl-M A R TE C w ill soon cease to be the youngest m em ber o f the M O T -S & W family. As fro m January 1989 K lvl-M A R TE C as SenW 57STE jA A R G A N G N R 2 sociated itself w ith th e N VTS in o rd e r to strengthen the N etherlands M aritim e So cie ty and to be o f b e tte r service to its members. W h a t is K lvl-M A R TE C and w hat can it be fo r you, to R otterdam and to the w o rld o f the (M a ritim e ) technology in general? Klvl stands fo r 'K o n in klijk In s titu u t van Ingenieurs’ ( ’Royal In stitu tio n o f Engineers in the N etherlands’) and M AR TEC obviously fo r its 'M A R itim e TEC hnology’ branch. The in s titu tio n has been founded in 1847 and is based and regis te re d in The Hague. Mem bers are graduates and students o f Netherlands Technical Universities o r Institutes on an equal academic level. The to ta l mem ber61 ship o f K lvl is approx 18,000, divided over about 40 branches. A lthough K lvl-M A R TE C is small and its significance marginal fo r R otterdam let alone fo r the (M aritim e) w o rld in general, its engineers associated w ith Institutions as Klvl w ill always, and have indeed in the past, played an im p ortan t part in the quali ty o f life o f R otterdam as a conglom erate o f trade-, transport-, industry-, service-, business-, labour- and living com m unity. I am convinced that we, o u r national pride R otterdam and our technology are facing an interesting decade nearing the tu rn o f a century. T o say that we are living in a fast changing w o rld , may be such a platitude, but 1989 proved it and w ith a num ber o f examples in various fields. In o u r profession, develop ments in the electronics, application o f new construction materials and inform a tio n science, are taking place at a s w ift pace and fundamentally influence o u r way o f life. Hence Post Graduate Education (P A T O ) ( I ) becomes m ore and m ore im p o rta n t fo r each o f us individually and the same applies to all companies. O u r way o f life promises to be affected to an even greater e x te n t by the present-day drastic social and political changes. N o t only is the integration o f W estern Europe going to govern the last decade o f this cen tury, th e opening o f the East Euopean b o r ders and the consequences fo r people and trade as w ell as the social and economical (re -)co n stru ctio n o f these countries may w ell be o f much g reater impact. The N etherlands' and R o tte rd a m ’s hinterland as w e ll as that o f o th e r countries has g ro w n considerably. L e t us n o t be laggards and consequently give the flo o r to o u r Japanese com petitors. For a long tim e it has been an axiom that th e re are no lim its to technological de velopments. H ow ever, no w nearly all Jules V erne’s visions (about 1870) have been achieved in one way o r another, it is tim e to sta rt to talk - and K lvl did start - about the lim its to technology (2, 3,4). Social and technical developm ents interact and are often taken o u t o f perspective due to the lack o f understanding o r m erely o u t o f fear fo r the unknown. The social changes we no w observe are achieved by the people and are obviously partly due to the technical achievements o f the C o m munication Science. C o n tra ry to w hat George O rw e ll feared in his book 'N in e teen Eighty-Four’ (Published in 1949) technical achievements can help people to become aware o f th e ir situation and give them the tools and m oral support to free themselves fro m suppression. The Club o f Rome’s Lim its to G ro w th ’ (5) and the B runtlandt co m m itte e re p o rt about the environm ent are challenges and n o t dooms. Technology does n o t set the lim its to man kind but mankind sets the lim its to tech Mama, bestaan er nog echte panda’s? nology. Technology is n o t a th re a t to man kind and should be tu rned to man's advan tage. It is my strong belief that organiza tions like Klvl have an im p ortan t role to fulfill in the discussion regarding technolo gy, environm ent and ethics to the benefit o f th e ir members, R otterdam and the technical science w h o are inevitably linked to each o ther. Each o f us should be indi vidually aware o f his responsibility and c rit ically fo llo w the developm ents in his o r her field o f w o rk. R otterdam w ill soon become a ’paperless’ p o rt (6), I w o n d e r when you and I w ill re ceive o u r firs t issue o f M O T -S & W on a floppy o r via o u r home term inal. 1. PATO, orgaan voor postacademisch onder wijs in de technische wetenschappen mede do or het Klvl opgericht in 19 8 1. 2. Ingenieurskrantnr 21/2 november 1989, 14daagse uitgave van Klvl en NIRIA. 3. De Ingenieur nr 11 (november 1989), maan delijks orgaan van het Klvl. 4. Grenzen aan Techniek, ir. A. J, van Griethuysen, STT. Publicatie 49. STT staat voor Stichting Toekomstbeeld der Techniek en is op instigatie van het Klvl opgericht in 1963. 5. 'Limits to G row th', Dennis Meadows c.s. 1972. 6. Ingenieurskrant nr 9/18 mei 1989. Most above mentioned publications are in the Dutch language only, I am glad that fo r M O T S&W this becomes a passed station fo r the technical papers. The Single-Source Solution to Corrosion control The most effective method of giving a steel structure full cor rosion prevention in sea water is to combine marine coatings and cathodic protection. Now for the first time Jotun and its subsidiary company, Jotun Cathodic Protection - leaders in corrosion protection techno logy - offer one complete answer to marine and offshore specifiers seeking the co-ordinated application of cathodic protection techniques and marine coatings. Contact your local Jotun office for further details of the most powerful corrosion prevention systems available on the market. 't J-' Jotun Protective Coatings GEEF OM DE TOEKOMST. A62 Word voor ƒ27,50 donateur van het Wereld Natuur Fonds. Giro 25, Zeist. & M a rin e - OH In d u stry - Heavy D u ty - C a th o d ic P ro fe e fron Jotun P rotective Coatings. Postboks 400,3201 SANDE FJORD, Norway Jotun C athodic Protection a s , P.O. Box 46,3971 LANGESUND. Norway Jotun Henry Clari* Ltd.. 142 Minones. LONDON EC3N 1 QL England Jot un NOF (Singapore! Pte Ltd . No. 15. Sixth Lok Yang Road, Jurong, SINGAPORE 2262 Jotun Valspar Marine Coatings. 1401 Severn St Baltim ore, Maryland 21230. USA. Jotun Hellas Ltd., troon Potytechmou. St. nr. 8 PIRAEUS 18531. Greece NOE Jotun (HK) Ltd., Room 907, Dominion Centre, 37 - 59 A Queens Road. East W anchai, HONG KONG Jotun-France S A . 88. Av. Chartes de Gaulle. 92200 NeuityS/Seeie. FRANCE. SHIPPING AND SHIPBUILDING IN ROTTERDAM THROUGHOUT THE CENTURIES by H. von Hoek Anyone interested in Rotterdam’s shipbuilding tradition and the significance o f this to the city will be drawn almost directly to the book 'De Rotterdamse scheepsbouw in de tijd van de Republiek' by Dr. S. V. van Kampen. This book takes a well-documented look at the birtrh o f the industry in Rotterdam, an industry which has been preserved throughout the centuries and which, just as during our century, was continually plagued by recessions, which were the result o f changed circumstances, yet always managed to keep afloat in the face o f all difficulty. In fact, it is m ore than logical that shipbuild ers and ship repair yards should have de veloped in R otterdam , as no p o rt can do w ith o u t. The close relationship existing b etw een shipping and shipbuilding is the obvious cause. Shipyards ow e th e ir very existence to the shipping trade, in this case to the ship ow ners, w h o vice versa, are de pendent on the shipbuilders and the quality o f the w o rk they deliver. If the shipping industry is in tro u b le , shipbuilders suffer along w ith th e shipping companies. O n the o th e r hand, the shipyards benefit fro m the good tim es in shipping. The g ro w th o f the yards is the d ire c t consequence o f the de velopm ent in shipping and ports. In turn, the g ro w th o f the shipping trade keeps pace w ith the expanding overseas trade. The firs t shipyards appeared in R otterdam at a ve ry early date. H ow ever, the exact date the firs t yard was founded is imposs ible to pinpoint. The oldest inspection book, dating fro m 1412, already contained regulations w ith which ’shipbuilders’ w ere to com ply when practising th e ir trade. By the seventeenth century, business w hich provided fo r th e needs o f the fishing industry, inland shipping and the merchant navy had been established, such as sailmakers, blockmakers, ta r burners and net tan neries. This was discussed in Mr. H. C. H azew inkel’s book ’Geschiedenis van R ot te rd a m ’. These w e re small, local busines ses, w hich fro m very early tim es provided jobs fo r a considerable population group and which, even in the tim e o f the Repub lic, em ployed only D utch w orkers. The econom ic and social aspects o f the industry — the jobs it provided - became evident at a ve ry early date. T h roughout th e cen turies this has been the significance o f the shipbuilding industry and shipping trade as w e ll as th e related industries: food and em ploym ent fo r many thousands o f people. The m ajority o f shipyards in the seven te e n th century fo llo w e d the energetically carried o u t p o rt expansion activities. By co nve rting th e city moats in to inner har bors, such as Blaak and Nieuwehaven, large sections o f land became available offering SenW 57STE IA A R G A N G N R 2 HET \HA\IK\r.LS SCHIP V \ x HOLLANI I. The "Aemilia', the flagship o f Maarten Harpertsz Tromp at Duinsat I6J9, built by a Rotterdam shipyard. favorable locations fo r setting up th e ship building operations. The yards gradually moved fro m , among o th e r locations, the H o u ttu in , firs t to the Zuidblaak, and later to the s trip o f land betw een the Scheepmakershaven and the river. The name re veals the trade practised here. The R o tte r dam chronicler Van W aerschut w rite s that there w e re seven shipyards on the Blaak, which, a fte r 1577, had to make way fo r o th e r buildings. Issue o f the new land began in 16 13. It was solely to be used fo r the construction o f yards and slipways. W ith in th re e years, all th e shipw rights at the Blaak and Oudehaven had to close dow n operations and move to the new site. By 1625, 30 slipways had been constructed at the Boompjes and by 1632, the East Indies Company (O IC ) had acquired th e ir o w n shipyard at this lo cation. The A d m ira lty on the Maze had maintained ashipyard at the east end o f the Nieuwehaven since the end o f the fif teenth century. S hipwrights w e re generally considered as ’tra d e ’. H ow ever, th e re w e re hardly any w ho succeeded in making a fo rtu n e in th e ir business. Jan Hermansz. K elst was an e x ception. In the assessment register o f 1654, he was assessed fo r a p ro p e rty o f ƒ 50.000. His skills as master shipbuilder w e re recognized th ro u g h o u t the en tire country, as w e re those o f his colleague Jan Salomonsz. Van den Tempel, the ship w rig h t o f the A d m ira lty on the Maze and builder o f T ro m p ’s famous flagship 'Aem ilia', the firs t big warship b uilt accord ing to fregate design and the p ro to ty p e o f the b o tto m s later developed o f this type, w hich fo r years was know n as the fastest ship o f the e n tire fleet. Regarding the ships b u ilt by Van den Tempel, T ro m p testified that they w e re 'the easiest to sail, and pe r form ed the fastest and the best in w arfare’. This is no mean com plim ent. It shows th a t very early on, D utch shipw rights had g ro w n in to highly skilled and succesful craftsmen. 63 In 1693, there w ere m an/ master ship w rig h ts and lum ber merchants w ho w anted to settle in R otterdam . The city had already started to gain a certain repu ta tio n in the field o f shipbuilding, A re p o rt on the subject concluded th a t the m ost suitable location fo r construction o f ship yards was the area outside the Schiedamse P oort, foundations o f which yards w e re found just before the main entrance to the Schielandshuis after R otterdam was bom bed in May 1940. A h a rbor could be dug on a site to the south o f this gate, ac cording to the re p o rt, w ith shipyards on e ith e r side, w hile additional space w ould be available fo r roperies and lum ber yards, both vital suppliers to the shipbuilding in dustry. The city council declared its agree m ent to the plan. The old Salmgat (Zalmhaven) was widened and deepened and in 1702 the land along the ’Salmhaven’ o r ’N ie u w e Buysegat' was sold t o interested parties fo r the develop m ent and construction o f some ten ship yards and lum ber yards. This is the reason w hy eighteenth century shipbuilders m oved fro m the location at the Boompjes w estw ard to the so-called ’N ieuw e W e rk ’. The O IC yard had already been moved to an area outside the O o s tp o o rt o f the Buizengat. A ccording to a re p o rt com piled by the Cham ber o f C om m erce at the time, before 1795 - apart fro m the establish ments o f the O IC and A d m ira lty - there w e re seven privately-ow ned yards in R o t terdam , each o f which delivered five to se ven ships per year and in w hich 600 to 700 w o rke rs w e re employed. Clearly, the e x panding shipping and fishing industry main tained the demand fo r m o re tonnage at such a level, that the shipyards w e re p ro vided w ith constant w o rk . In addition to the yards already m entioned, th e re w e re fo u r others which built only inland shipping vessels. There must have been many w h o made a living in the enorm ous yards in the Buizengat, and especially on those o f the A dm iralty. The name " 's Land W e r f ‘ given to the housing developm ent b u ilt here af te r the second w o rld w a r is a re m in d e r o f the yard which was fo rm e rly established on this location. In the th ird q uarter o f the century, ship building in the Republic, and th e re fo re also in R otterdam , had reached the peak o f abil ity, w rite s D r. Van Kampen. N o t only in the sense th a t this developed no fu rth e r, but also th a t in comparison w ith the coun tries abroad (e.g. France and England) there was even a d e te rio ra tio n , especially regarding the construction techniques used in building warships. The achieve ments o f th e English shipbuilders o f the tim e w e re such th a t th e A d m ira lty on the Maze w ondered w h e th e r it w o u ld n o t be a good idea to appoint an English shipw right as 'General D ire c to r o f the State Ship 64 building industry'. A lth o u g h the A d m ira lty apparently realized that, com pared w ith th e English builders, shipbuilding in the Netherlands had failed to keep up, this never happened, at least not in Rotterdam . H o w e ve r, the unceasing complaints fro m p a rt o f the naval officers finally led the A d m ira lty in Am sterdam to appoint an Eng lish master shipbuilder. He, how ever, e x perienced much open as w ell as concealed opp o sitio n fro m the - understandably envious D utch craftsmen. The problem o f the shipbuilders in the N etherlands was the lack o f theoretical knowledge. A ccording to a N orw egian shipbuilder, the D utch tended to build ships on in tu itio n only, says D r. Van Kam pen. He adds th a t good ships w e re also b u ilt in Holland, but because the builders w e re n o t concerned about the techniques used, it was n o t always possible fo r them to determ ine the result o f th e ir w o rk in advance. They w e re fo rce d to w a it and see how the ship w ould p e rfo rm at sea. Thus it was n o t unusual fo r one and the same mas te r shipbuilder to deliver an excellent ship fo llo w e d by one o f p o o r quality. The B ritish au th o r Simon Schama states in his b o o k 'P a trio tte n en B evrijders’ that gradually, the o rie n ta tio n o f the D utch econom y to w a rd s th e sea started to wane. A ccording to him, it w ould be absurd and an exageration to suggest th a t the D utch w e re no longer a sea-faring people, but complaints about the declining numbers o f 2. Dutch flight built sometime around 1700 by a Rotterdam shipyard. The model is in the maritime Museum in Rotterdam. sailors, fishermen, shipwrights, anchor smiths, mast builders, sail weavers and o th e r such w ere heard daily. The decline was both qualitative and quantitative. The once so superior D utch shipbuilders — al though statements o f D r. Van Kampen cast doubts on this, to o - w e re now overtaken and le ft behind by th e ir N o rth e rn Euro pean rivals. Halfway through the eighteenth century, luitenant-adm iral C o rnelis Schrijver issued a grave warning to the D utch shipyards on the dire consequences o f stubbornly cling ing to outdated construction methods. As w e re many o f the lamentations o f the tim e, his pessimism, according to Schama, was slightly exagerated. As was the case in o th e r sectors o f the D utch economy, the problem was n o t any d e te rio ra tio n in skill o r in the quality o f the products delivered, b u t was a result o f the fact th a t others had k e p t up w ith new developm ents w hile th e Netherlands had stood still. The stagnating g ro w th in cargo shipping and in the fishing industry m eant less w o rk fo r the shipyards. H ow ever, it was also a period in w hich many ships w e re lost. Merchant ships w e re frequently captured by the infamous D un k irk pirates. Many ships w e n t do w n o r w e re damaged during the sea wars w ith England o r o th e r countries. Many ships failed to re tu rn fro m th e M editerranean area o r fro m the East. These calamities en sured a sufficient num ber o f orders fo r the yards, w hile orders w e re also regularly ac quired fro m abroad, especially fro m France o r Schotland. Nonetheless, Schama states th a t Holland may centainly lay no claim to being the shipyard o f Europe during the eighteenth century. Even in R otterdam , the num ber o f yards was halved betw een 1650 and 1750. This ra th e r considerable reduction, how ever, was a slow and uneven process. A plus p o in t fo r m erchant shipping was the developm ent o f cargo trade fro m abroad under D utch flag. The costs fo r construc tio n o f new ships in Holland w e re low , as was the pay fo r a crew , which was m ore o ve r small and technically highly skilled. This com plex o f factors led to th e e x tre m e ly com petitive position o f the D utch cargo traders com pared to any o th e r country. In the shipbuilding sector, how ev er, th e situation was d ifferent. The wages paid in this branch tended to be high, w hich weakened the position o f this branch o f in dustry on the m arket. According to a docum ent fro m one Van d e r Kooy, quoted in Van Kampen's book, in R otterdam ship ping did n o t exist - e xce p t fo r those cap tains w h o ow ned the ships they co m manded - as a separate, independent in dustry. It was generally no m ore than a sideline, in the fo rm o f shared shipowning. Just as merchants w ho, besides in bonds, also attem pted in this way to achieve a SenW 57STE jA A R G A N G N R 2 R o tte rd a m 1990 higher p ro fit on th e ir capital. The con stru ctio n o f warships was a highly im p o r ta n t a ctivity in seventeenth century R o t terdam . W h ile the A d m ira lty on the Maze had its o w n yard, it was n o t able to keep up w ith demand. This was especially th e case w henever the fle e t needed to be e x panded o r w hen it returned, ravaged by battle, w ith only a fe w days respite fo r re pairs before going back to sea. Repairing the fleet, an activity th a t was carried o u t in Hellevoetsluis, ofte n provided w o rk fo r the private shipyards, as a result o f which the w o rk fo r th e ir ow n custom ers tended to suffer, o r even come to a halt al to g e th e r. The O IC , how ever, w ho, during th e firs t fe w years had had th e ir ships b uilt by private shipyards, was lost as custom er w hen th e y bought th e ir o w n shipyard on th e Boompjes in 1632, which was m ore than capable o f supplying the tonnage re quired. D r. Van kampen notes th a t inform ations on bo th the seventeenth and the eigh te e n th century is lacking, which makes it impossible to com pile an accurate picture o f the ship building insudtry in Rotterdam . O n ly general trends can be observed. T h ro u g h o u t th e en tire century, the num ber o f shipyards remained the same, m erely sometimes changing owners. The w hole tim e th e re w e re three o r fo u r com panies on the Zalmhaven, each o f which operated tw o o r th re e shipyards. There w e re, additionally, a num ber o f e n tre -p re neurs in the ship construction business, w h o each ow ned one shipyard. Finally, th e re w e re a few m odest businesses along the R o tte w here small craft fo r inland ship ping w e re built. The eighteenth century was, in general, a period o f peace, which was disturbed only sporadically by war, such as th e Seven Years W a r (1 7 5 6 -1763) and th e Fourth English W a r (17 8 0 -1784). Peacetime in Holland was generally a signal to neglect th e fleet. Im provem ents w e re made in this case during the Fourth English W a r, when a num ber o f shipyards in R o t terdam w e re commissioned to build w a r ships. The R otterdam fishing fleet, consist ing in 17 5 1 o f around 95 herring boats, was reduced t o a m ere six vessels a century la te r. In addition, orders fro m abroad be came scarcer, finally drying up a ltogether and leaving only the dom estic orders. Based on this situation, a declining ship building industry in R otterdam during the eighteenth ce ntury w ould be a reasonable e xpectation. Y e t the ship construction in d u stry in R otterdam , w ith th e exception o f th e firs t ten years, seems to have had no lack o f orders. A t least no complaints w e re heard fro m th e shipyards. A study has m o re o ve r shown th a t th e shipbuilders w ith a m ortgage on th e ir yard w e re regu larly able to redeem this. Trade and ship ping in R otterdam remained at the same SenW 57STE jA A R G A N G N R 2 level fo r a ve ry long tim e, and as did the p ro d u ctio n level o f new ly constructed ships. In the second half o f the eighteenth cen tury, how ever, a dow nw ard tre n d became steadily m ore manifest. The p ro te c tio n is t measures o f nations abroad began to in creasingly make themselves felt. Shipbuild e r De R uyter complains that it is difficult fo r shipbuilders to 'earn th e ir living'. It is clear th a t this also had an impact on em ploym ent, resulting in an increased 3. The only existing picture o f Gerhard M o ritz Roentgen, founder and director ( 18 2 3 -1849) o f the Etablissement Fijenoord. num ber o f p o o r in the city. D e R uyter was heard to advocate fiancial support fo r the national shipbuilding industry, a proposal w hich som ehow seems familiair to us today. The situation d e te rio ra te d especially rapidly during the I7 7 0 ’s. Middle-sized yards complained about the lack o f repair w o rk and about the fact th a t new con stru ctio n activities had com pletely dried up. Hence, in th e years leading up to the Fourth English W ar, the shipbuilding indus tr y was on its last legs, and unem ploym ent was rampant. In 1782, how ever, the con s truction o f new ships was booming, a situ ation mainly a ttributable to the w a r w ith England. A fte r th e w ar, activities slackened somewhat, ye t the shipyards successfully maintained operations. In N apoleonic tim es R otterdam boasted seven large, p ri vately ow ned shipyards - the same number as in 1704 - and fo u r smaller yards which b u ilt inland shipping vessels. D r. Van Kam pen also dug up inform atoion on the R ot terdam shipbuilding industry as source o f em ploym ent. In 18 16, when the industry was limping along, this branch o f industry was second only to th e tobacco industry in the num ber o f w o rk e rs - 225 - it em ployed. D uring the boom in 1782, w hen approxim ately 400 shipwrights and 300 d o ckw o rke rs and o th e r w o rk e rs found em ploym ent at the larger yards, the relative significance o f the shipbuilding industry at R otterdam was, very likely, te m p o ra rily greater. The lack o f details on the shipw rights’ guild make it impossible, according to D r. Van Kampen, to determ ine the num ber o f employees w o rkin g at the Boompjes during the seventeenth century. Relying on data on the eighteenth century, and taking in to consideration the fact that building tech niques remained unchanged, as w ell as fact th a t the num ber o f shipyards was g re a te r in the m iddle o f the seventeenth century than in the eighteenth, it may be assumed th a t approxim ately 1000 people w e re em ployed in this branch o f industry some w here around 1650. There w e re probably around 10 men employed at each o f the previously mentioned smaller yards, in t o tal th e re fo re 40 men. Nonetheless, it is safe to conclude that the shipyards w e re then, and w e re to remain, an im p o rta n t source o f em ploym ent to the R otterdam population. Shipping and the shipbuilding industry un d e rw e n t revolutionary changes in the nineteenth century. This is the cen tu ry o f the industrial revolution, heralded in 1788 by the invention o f the steam machine by the Englishman James W a tt w hich was to lead to a unique develop m ent. The firs t steam ship, the 'C le rm o n t' b u ilt by the Am erican R ob ert Fulton ushered in the Age o f Steam in shipping. The developm ent o f steamships in Europe reaches back to the firs t decade o f the nineteenth century. The Dutchm an G erard Roentgen played an im po rta nt p a rt in the developm ent o f the D utch steam shipping trade, w hich was especially sig nificant fo r R otterdam . V e ry early, in the 1820’s, Roentgen com piled a memorandum on the application o f steam -driven machinery fo r the propulsion o f warships (he was an o ffice r in the navy), in which he gave an almost p rophetic vision o f the future. In I8 I6 , King W illiam I sent him to England to study and make a re p o rt o f the shipbuilding techniques applied there. Roentgen b ro u g h t the various tech nical invention em ployed in England to the notice o f the governm ent, emphasizing th e ir im portance. He re tu rn e d to England in 18 18 and again in 18 2 1. In his chronicle 'Gedenkboek W ilto n -F ije n o o rd ’, Prof. D r. P. j. Bouman w rite s that in 1953 it w ould appear that the royal sup p o rt given to the m odernization o f the D utch shipbuilding industry had been o f great significance. In N apoleonic times, the shipbuilding industry was in a tru ly deplor65 van der Giessen-de Noord shipbuiidmg-division b.v. P.O. Box 1 2920 AA Krimpen aan den IJssel The Netherlands Tel.: +31-180712144 Telex: 22428 Telefax: +31-180718180 A66 Rotterdam 1?90 able condition. Skill and know ledge had been lost. F or this reason, many D utch shipping companies had th e ir ships built abroad - w ith a preference fo r England. By 18 2 1, m ore than a th ird o f the D utch m e r chant fle e t and 80% o f th e to ta l carrying capacity o f the ocean-going shipping trade was foreign built. The institution o f the Nederlandsche Handel-Maatschappij (N H M ; Netherlands T rade Com pany) - an initiative o f King W ille m I - in 1824, w hich company was p e rm itte d to charter only D u tch -b u ilt ships fo r th e ir transport, stimulated the D utch shipbuilding industry and hence, also th a t o f R otterdam . As a result, w e find, as early as this, a political governm ental p o li cy, aimed at supporting the national ship building industry, and th e re fo re a t pre serving a source o f em ploym ent and in come. In fact, a situation very close to that o f th e present, only taking a diffe re n t ap proach. O f th e tw o pioneers in the steamship trade and construction o f steamships and ship machinery - Roentgen in R otterdam and Van Vlissingen in Am sterdam - Roentgen was, according to Bouman, technically the m o re highly gifted. A lm o st fro m the start, he maintained, w ith the know ledge and ap proval o f King W illiam , ties w ith a group o f w ealthy entrepreneurs, w h o founded the Nederlandsche S to o m b o o t Maatschappij (N S M ) in N ovem be r o f 1823. Roentgen, one o f the co-founders, acted as equip m ent and machinery d ire c to r. Prof. Bou/ if 5. Facsimile o f a page from a memorandum from Roentgen, dated September 25 1824, recommending the founding o f a machinery factory. SenW 57STE jA A R G A N G N R 2 4. A steamboat on the Maas in Rotterdam in 1825, from a drawing by D. Moens in the Municipal Archives. man stresses the fact th a t the minutes show how much tro u b le these pioneers o f the D utch steamship industry w e n t to in o rd e r to p ro m o te acceptance o f the new invention, an uphill and frequently un thankful task w hich entailed many risks and offered fe w op p o rtu n itie s fo r profits. The NSM started operations in the summer o f 1824 w ith only one ship and A n tw e rp as its destination. In the fall o f th a t same year, a second ship was com pleted. It was also de cided to fo llo w a suggestion put fo rw a rd by Roentgen, namely to build another steam boat which w ould regularly sail be tw een Am sterdam and Hamburg, o r be tw een R otterdam and London. Repair w o rk was carried o u t by the NSM in a w orkshop on the Boompjes in R otterdam . W h ile the plans fo r this seaship w e re still being drafted, the num ber o f riv e r steam boats operated by the NSM was increased to four. It was a modest, yet at th e same tim e imposing, start to the steamship trade under D utch flag. R otterdam played an im p o rta n t part in this, a part the city ow ed to Roentgen. The king, w h o held grand plans fo r m odernizing and adapting the navy to the new technical developments, con sulted w ith Roentgen on w h e th e r o r n o t a new com plex should be founded fo r ship and machinery construction. In 1825, a de cision in favor o f this became definite, w ith the result th a t the NSM became respons ible fo r a second line o f activities which very quickly n o t only caught up w ith , but even o v e rto o k the im portance o f th e car rie r operations. Prof. Bouman w rite s in his bo o k th a t the reason fo r this may, on the one hand, be a ttrib u te d to the one-sided technical interests o f Roentgen, but on the o th e r, because o f the very lim ited o p p o r tunities fo r sea-going steamships at that tim e. Interestly, prof. Bouman also notes th a t the lagging developm ent o f the steam ship trade in the Netherlands form s a clas sic example o f the disadvantages o f p ro te c tionism . Everyone had an interest in s triv ing fo r perfection. It must be kept in mind th a t the Netherlands Trade Company ceded a p o rtio n o f its m onopolistic profits to encourage shipowners to give th e ir o r ders to D utch shipyards. M oreover, in so far as they w e re unable to bear the costs o f high fre ig h t rates themselves, they w ere p e rm itte d to submit a statem ent o f expen ses to the governm ent. Hence, outdated sailing ships w e re able to co lle ct freights w hich w e re 50 to 100% higher than the level o f th e free international market. A boon to many shipyards and shipping com panies, but in actual essence this p u t a pre mium on traditional ship construction in th e Netherlands, giving England the chance to fu rth e r consolidate th e ir lead in the steamship trade. It is beyond com prehen sion th a t this w e n t unrealized in the Netherlands. The NSM, to o , could count on the support and in te re st o f the governm ent, but n o th ing in comparison to the encouragement given to the sailing ships. Calculations show th a t the N H M paid around fo u r m il lion guilders in e x tra fre ig h t o ve r and ab o u t the level o f the free m arket and subse quently, betw een th e period o f 1830 to 1868, no less than eighty m illion by gov ernm ent o rd e r. A pparently, the sky was the lim it. And still, no eyes w ere opened. A note fro m Prof. Bouman in this c o n te x t makes it clear that because o f this situa tion, the technical effo rts o f Roentgen in R otterdam , and o f Van Vlissingen in A m sterdam w e re doom ed to remain confined to experim ents o f which only later genera 67 tions w ould reap the benefits. P ro te c tio n ist measures, in this case, led the industry to d ro p behind to such a degree, recovery could be considered alm ost impossible. In 1826, the NSM opened negotiations w ith R otterdam about renting the fo rm e r quarantine station, the so-called Plague House, on the island o f Fijenoord on the Left Bank. The upshot o f these negotia tions was th a t the NSM was able to re n t the site fo r a period o f 20 years. Prepara tions began at once. The harbour was deepened, and partly roofed in, so th a t ship repairs and paintings w o rk could be car ried o u t under cover. A shed was b uilt in w hich the boiler w o rk s w e re housed, w hile enough space was left a fte r allowing fo r the slipways fo r various o th e r w o rk yards. W ith a man like Roentgen, w h o had acquired an impressive re p u ta tio n in the field o f shipbuilding and mechanics, to lead the way, this am bitious p ro je c t fo r esta blishing the Etablissement F ijenoord had a solid foundation, according to Prof. Bouman. It is sad that this company was unable to p ro fit to a greater degree fro m the strongly revival o f activities relating to the construction o f iron steamships and the machines required fo r these, fo r w hich sig nificant orders w e re received a fte r 1825. The decision to establish the shipyard and w orkyards was taken at the rig h t m om ent, yet th e financial means o f the company proved to be to o lim ited, probably due to the fact that it had been anticipated th a t the main activities w ould be repairs instead 6. Etablissement Fijenoord at Rotterdam in 1850. 68 o f the construction o f new ships. In his bo o k ’Roentgen Biografie’, D r. M. G. den B oer notes that the cramped financial s tru ctu re was a mistake w hich had a paralyzing e ffect on Roentgen’s w o rk rig h t up to the end o f his career. He, how ever, was n o t to blame, as the responsibility fo r this lay w ith his c o -d ire c to r Van V ollenhoven. He, in tu rn , could plead as excuse that he was acting according to the wishes o f the m a jo rity o f shareholders. A s h o rt sighted policy, says D r. D e Boer. V ery soon, in 1826, it became clear th a t the b o il e r w o rk s w e re to o small. The under capitalization and the consequences th e re o f became blindingly apparent. A n e xtra o rd in a ry general m eeting was con vened in o rd e r to review the operating possibilities o f the company. D ire c to rs and shareholders subscribed to a loan fo r ƒ 50 .0 0 0 ,- intended to alleviate the com pany’s w o rs t financial need. M o reover, fo r the tim e being, the shipyard was to confine its activities to constructing and repairing the ships operated by the NSM. It was de cided n o t to build tonnage fo r th ird parties fo r the present. W e have discussed this phase o f the shipbuilding industry in R o t terdam in such detail and w ith the use o f the available sources because the Etablisse ment. Fijenoord was the pioneering company responsible fo r opening the way fo r the emergence o f an e n tire ly new shipbuilding industry in R otterdam adjusted to the de velopm ents o f the times. The name R oent gen is indissoluably bound to this. Besides financial woes, th e re w e re also several technical experim ents in which Roentgen's in ve n tivity and unflagging energy are clearly displayed. A n example is the principle o f the compound-machine, which he discovered. T h rough out the years, how ever, the company continued to be confronted w ith a w ide range o f difficul ties and hardships, in which a dominant ro le was played by the financial position. Essentially, the situation o f the NSM was n o t a b rig h t one, w hich also applied, to a similar degree, to the national economy. In 1840, Roentgen put fo rw a rd a plan fo r increasing the efficiency o f the Rhine ship ping trade w ith a view to strengthening the position o f th e industry in the face o f the co m p e titio n fro m the railway. This plan consisted o f constructing iro n lighters w hich w e re to be pulled by tugs. This proposal rapidly proved to be extrem ely practicable and delivered an impulse to the shipbuilding industry, especially fo r the smaller shipyards. A m ajor d ifficulty was the fact th a t during the firs t half o f the nineteenth century th e re was no one in o u r co u ntry capable o f training people to w o rk in the machine in dustry. The NSM, how ever, succeeded in re cru itin g technical personnel fro m Eng land able to act as foreman and master. It w e re these Englishmen w h o w e re re sponsible fo r educating the young genera tio n o f machine builders, fo rm ers and boil e r makers. A ccording to Prof. Bouman, t h e ir influence o n th e p ro d u c tio n m e th o d s o f Etablissement Fijenoord remained visi ble until deep in the nineteenth century. This is also evidenced by the use o f many technical term s w hich are corrup tio ns o f original English w ords. SenW 57STE jA A R G A N G N R 2 R o tte rd a m 1990 It is w o rth noting that Roentgen applied the new est propulsion technique, the ship’s p ro p e llo r - invented in 1839 by the Swedish engineer John Ericsson - only at a la te r date and w ith o u t making any p rin ci ple changes to this. H ow ever, increasingly heavy demands w e re made on his restless s p irit. D uring the final years o f his life he never w e n t to bed w ith o u t setting a table n e x t to him on which an oil lamp, letters, paper and pencil stood. He was in the habit o f taking notes until deep in th e night w hich he then w orked o u t in m ore detail the fo llo w in g day. His exceptionally em otional character gave him a vulnerability which, in the early spring o f 1849, led to a mental breakdow n and at a later date, to a full collapse o f his m ental pow ers. He was adm itted to the in stitu tio n ’M eer en Berg’ near Santpoort, w h e re he died, on O c to b e r 18 1852, at the age o f only 57. It was Roentgen’s genius th a t made the shipyard at Fijenoord a great one, enabling it to , despite all setbacks c o n fro n tin g it th ro u g h o u t the forties, be n e fit fro m the firs t signs o f econom ic re vi val in the industry. It is fair to say that Roentgen was the father o f the R otterdam shipbuilding industry in the fo rm in which this em erged a fte r the Industrial Revolu tion. In 1925, the Company 'fo r Ship and Machine C onstruction ’Fijenoord’, to give the yard its official name, celebrated its 100th anniversary. A dded luster was given to this occasion by the appearance o f the m em orial bo ok and biography ’Leven en B e d rijf van G erhard M o ritz Roentgen’ as the fo u n d e r o f this company. The so-called industrial revolution refe rre d to earlier, durin g which the mechanization o f indus tr y was achieved, to o k place in o u r country at a far late r date than elsewhere, namely betw een 18 5 0 -1870. It is indisputable that Roentgen was a man w ho was far ahead o f his tim e . The Netherlands, and the D utch shipbuilding industry, aw oke fro m the lethargy in to which it had sunk far to o late fo r a tru e appreciation o f his qualities. A f te r Roentgen, it was B art W ilto n w ho, at a la te r stage in the econom ic expansion, w hen R otterdam was w ell on the way to becom ing one o f the m ajor harbors o f the w o rld , n e x t attracted a tte n tio n w ith the founding o f W ilto n ’s Machinery factory and Shipyard in R otterdam , and later in Schiedam. W ilto n , in his o w n field, th a t o f repairing ships was every b it as much as p io n e e r as Roentgen was in his. D u rin g the depression years in the second half o f the second decade o f this century, ’F ije n o o rd ’ and ’W ilto n ’ w e re merged in to th e D o k - en W e rf Maatschappij W ilto n Fijenoord N V, which was established in Schiedam. The old shipyard ’Fijenoord’ was closed down. By 19 2 1, the econom ic situation had al SenW 57STE jA A R G A N G N R 2 ready taken a tu rn fo r the worse. For the Fijenoord shipyard, this had led to a IQ% cut in wages fo r adult employees and a 15% cut fo r those w ho w e re under age. The labor organizations - n o t as pow erful then as today - protested against the wage cuts, and in N o ve m b e r 1922, a strike broke out, which finally ended during the firs t half o f January 1923, in a v ic to ry fo r the employers. In the course o f that same year, wages tw ic e underw ent cuts o f 6% . Y e t the m erger w ith W ilto n in 1929 was n o t a move made fro m desperation, but was a developm ent which to o k place in a tim e o f prosperity. The M em orial bo o k ac centuates this fact. It was only in 1930 that th e re was any reason to dou b t that econom ic conditions w ould be less than b rig h t in the near future. The financial crisis o f 1928 in the USA had developed into a general crisis by 1930. A t the end o f 1930 W ilto n -F ije n o o rd employed half the number o f employees it had employed the previous year, according to the Gedenkboek W ilto n -F ije n o o rd , w hen the com bi nation celebrated its fiftie th anniversary. It w ould n o t fit w ith in th e scope o f this article to examine the emergence o f all ship and repair yards in R otterdam in de tail. H ow ever, one o th e r name should n o t go w ith o u t mention, namely th a t o f the Rotterdamsche D ro o g d o k Maatschappij N.V., founded in 1902, and the builder o f many fre ig h t ships, navy vessels and w o rld famous liners fo r the H olland-Am erica Line. From the ve ry beginning, the RDM occupied an unique position among its com petitors, according to the memorial book ’Een halve eeuw D ro o g d o k ’, which appeared in 1952. The many small and very small yards in the R otterdam p o rt area and vicinity have ke p t pace w ith the developm ents which have taken place in shipping and in the harbour. Shipbuilding and shipping are industries which are e xtre m e ly sensitive to econom ic conditions, and, th ro u g h o u t the centuries, have had th e ir full share o f both good tim es and bad. This was once again dem onstrated by the situation a fte r w o rld w a r tw o . It was clear fro m the s ta rt that a fte r the w a r th e re w ould be an enorm ous demand fo r m ore tonnage. D uring the fif ties and the sixties, the D utch yards w o rk ed as they never had before. The eighties, how ever, w e re undeniably catastrophical years fo r the shipbuilding industry. The re cession and the fact th a t far m ore tonnage was b u ilt than was needed to replace o u t dated vessels and to keep up w ith the g ro w th in the overseas w o rld trade, re sulted in large-scale reductions in new con structions capacity, the like o f which had h ith e rto been unknown. Nonetheless, the industry managed to keep afloat - barely w hich meant that fo r a large part, em ploy m ent was able to be preserved. Both the shipping and the shipbuilding industry have played various roles, in R otterdam th ro u g h o u t past centuries. That o f p ro vid ing em ploym ent fo r thousands o f people is certainly n o t the least o f these. The merchant fleet, w hich was, and fo r that m a tte r still is operated fro m R o tte r dam, had and has an in te re st in a w e llequipped shipyard industry fo r construc tio n o f new vessels and carrying o u t re pairs, w hile in addition, o rders fro m abroad started to play an increasingly grea te r role. In this way, an industry has de veloped which has gained b oth national and international fame. Postwar developments, especially in the shipbuilding industry, form an entirely dif fe re n t story, and are still fresh in the minds o f everyone directly involved. For this reason, w e prof»ose to end o u r story here. It remains only to n ote that both the ship ping industry as w ell as ship construction, just as in the past, continue to play an im p o rta n t part in the ups and downs o f the w o rld ’s largest p o rt. Both industrial branches are so intim ately tie d up w ith the city and its p o rt th a t they have become an inextricable p a rt o f the life o f R otterdam . Sources: Geschiedenis van Rotterdam, by M r. H. C. Hazewinkel, N V Uitgevers Mij. ’J oost van den Vondel’, Amsterdam , 1942. Leven en B edrijf van Gerhard M o ritz Roentgen, by D r. M. G. de Boer, P. N oordhoff, Groningen, 19 2 3 . De Rotterdamse particuliere Scheepsbouw in de tijd van de Republiek, by D r. S. C, van Kampen, U itgeverij Born N V , Assen, I9S3. Prof. dr. P. J. Bouman, G edenkboek W ilto n Fijenoord, Schiedam, 1954. Een halve eeuw 'D ro o g d o k’ ( 19 0 2 -1952), an RDM publication, 1952. Patriotten en Bevrijders, by Simon Schama, Uitgevers Mij A G O N , Amsterdam, 1989 The Illustrations w ere partly taken fro m the literature listed above. 69 BOLNES B.V v/h DE GROOT EN VAN VLIET REPAIRYARD A ND ENGINEW ORKS MEMBER OF THE YVC GROUP A dd re ss: O o s td ijk 25 3077 CP R o tte rd a m P o stb o x 9357 3007 A J R o tte rd a m T e le p h o n e : 010-4799799 T e le fa x: 010-4793760 T elex: 20459 VLIET NL A70 L o cated n ear th e R o tte rd a m p o rt area 2 do cks up to 25,000 to n s d w 2 side s lip w a y s E xperienced w ith all kin d s o f c o n v e rs io n s and le n g th e n in g s and... th e b e n e fit th a t th e k n o w -h o w and th e fa c ilitie s o f th e n e w b u ild in g d e p a rtm e n t o f th e YVC g ro u p can be called in ROTTERDAM - MAIN PORT OF WESTERN EUROPE By G. van den Burg F o re w o rd Rotterdam has grown to become the most fully mechanised bulk cargo port o f the world, os well as the distribution centre o f Europe (EEC). Roughly between 50 and 90% o f the goods entering Rotterdam on the various sea vessels are distributed by means o f pipelines, barges, cars and trains to the other countries o f Western Europe. O rig in s Around the year one thousand, the w e s t ern part o f the N etherlands was still a tru e D elta area, form ed by the Maas and Rijn rivers. The m ajor cities to develop during this period w e re Leiden, D e lft, Gouda and D ordrech t: the latter, w ith its warehouse p o rt, was economically the m ost sig nificant. The many rivers arms, channels and creeks provided ample fishing possibilities. A t the same tim e, these arms, creeks and channels form ed natural access routes by means o f which storm floods could penetrate inland to batter the dikes erected in defense. As a result, a large number o f these creeks w ere dammed up during the th irte e n th century. This was the case w ith the R otte, and be fore long, a settle m en t sprang up close to R otterdam , which later became know n as R otterdam . The settlem ent was located in a bend o f the N ieuw e Maas, then called the M erwe, on the wide, inside bank. The rapidly grow ing settlem ent was granted a charter by C o unt W ille m IV on June 7 1340. Soon after, it obtained the rig h t to construct a w aterw ay into the dammed-up Schie and to build a road which was con nected to the existing road system, saving R otterdam from isolation. A pparently, the new to w n was able to m uster sufficient g ro w th p o w e r from the sta rt in o rd e r to develop, w ith in only a fe w decades in to a place o f such size and im portance as to be included in the list o f D utch cities. The city continued to develop a fte r 1340, and jo u rnies must have been regularly undertaken to England and France, and perhaps o th e r countries as well. T ow ard th e end o f the fifte e n th century, how ever, R otterdam found itself in severe difficulties due to the rio ts and disorder which w ere sweeping the country. The Jonker Franssen w ar which bro ke o u t in 1488 was especially disturbing. Even after the co u n try had quieted dow n, R otterdam continued t o limp along fo r many years. This was p artly because o f the effects o f the wars fought during the reign o f Charles V. It was only in the second half o f the six teenth century th a t events to o k a tu rn fo r the b e tte r. R otterdam sw iftly developed into a significant p o rt and centre o f trade. SenW 57STE IA A R G A N G N R 2 In this way, R otterdam reached a peak in developm ent fo r the first tim e, and gained recognition as a warehouse p o rt during the seventeenth century, by which tim e the co u n try had gradually developed in to the second largest trading p o rt in the country. O ne o f the m ajor reasons fo r this th rivin g developm ent was the favourable geographical location o f the city in the ’D e lta ’ form ed by the great rivers, which w e re navigable far inland, as w ell as on the centrally located N o rth Sea, which is enThe ’Delta area' during the 13th century. circled by the Baltic countries, England and the Southern European countries. In 1795, the country was invaded by the French, and conditions d e te riora ted at a rapid pace. In 18 13, a new period o f prosperity dawned, a period shaped by the changes in the character o f the p o rt and the arrival o f the firs t steamships. A n im p o rta n t date during this era is 1831, the year in which the C onvention at Mains declared the freedom o f the Rhine, w ith a basin o f 224,000 km 2, in which the staple 71 STOP POLLUTION, SAVE MONEY E-VAC VACUUM TOILET SYSTEM • Simplicity The simplicity of a holding tank system is ideal for offshore supply ships with small crews and varying loads. The only draw-back, the limited lank capacity, is eliminated by using the Evac vacuum toilet system. • Flexibility of piping installation Sewage is transported by vacuum instead of by gravity. The piping can be installed regardless of slope, even upwards. Small diameter piping is used, saves installation costs and space. • Reliable ejector pumps Vacuum is created by an ejector, the most reliable of any vacuum pump owing to its inherent simplicity and lack of moving parts. The ejector is powered by a special centrifugal pump which is also utilized to discharge the tank. • Saves water Vacuum toilets use only 1,2 litres (2.5 pints) of water per flush. Lower installation costs for the domestic water system. lÊm m W r T X f ENVIROVAC SYSTEMS RIJNKADE 17, 1382 GS WEESP POSTBUS 9, 1380 AA WEESP TEL: 02940-1 99 91 TELEFAX: 02940-8 06 50 HOLLAND ROER PROPELLER voor optimale manoeuvreer baarheid. rm V & fc ® Gears & Services BV Wordt succesvol toegepast voor o.a.: veerponten passagiersschepen binnenschepen kraanschepen drijvende bokken sleep- en duwboten reinigingsvaartuigen patrouillevaartuigen onze kracht... Reparatie en service van: Tandwielkasten voor maritieme en stationaire toepassingen Standaard leverbaar tot 1600 pk. Speciale uitvoeringen en grotere vermogens, aangepast aan uw wensen en bedrijfsomstandigheden, kunnen geleverd worden. Vraag prijs en uitvoerige dokumentatie bij HOLLAND n f i r n J ohan n U C I\~ DANE BV PROPELLER A72 Zaag 27, Postbus 2020 2930 AA Krimpen aJd Lek Telefoon 01807-19988 Telefax 01807-19256 Telex 24157 Pannerdenstraat 3-11 Haven nr. 2191 3087 CH Rotterdam postbus 5420, 3008 AK Rotterdam Telefoon (010) 42.99822 Telex 28183 Telefax: (010) 4291.129 Heemskerkstraat 10 4461 HE Goes Telefoon: (01100)-2 76 65 Telefax: <01100)-3 21 54 R o tte rd a m 1990 privileges lapsed and the riv e r mouths were opened fo r transit. The entrance to the N o rth Sea w orsened daily. There was a need fo r a short, reliable route to the N o rth Sea. H o o k in g up th e H o o k o f H o lla n d The marine engineer Cruquius observed as early as the eighteenth century that: ’if Rotterdam wished to avoid becoming a silted up, and hence inaccessible p o rt, just The m ost im p o rta n t decision regarding post-w ar reconstruction in the N e th e r lands to be taken by the governm ent then in p o w e r was th e ir decision to industrialize the country. By 1952, industry was back up to the level o f 1938. The shipping industry, how ever, continued to g ro w . The p o rt expanded at a rapid pace, starting w ith the im plem entation o f the 'B o tle k plan’. In the B otlek, an indus tria l area measuring 790 ha. was situated betw een the O ude Maas, the island o f Putten and the village o f Rozenburg. The harbours in the Botlek area are acces sible fo r ships w ith a draught o f ca. 44 feet (approx. 80,000 tons dw.). E u ro p o o rt The N e w W a te rw a y riv e r was to o shallow fo r vessels o f 90,000 tons dw , w hile fro m a nautical p o in t o f view it seemed w iser fo r these colossal vessels to be m oored as closely as possible to the sea. The problem which thus arose was solved by setting up an entire ly new industrial area on the approxim ately 19 km. long farming island o f Rozenburg. A n industrial area measuring approxim ately 3600 ha. w ith its ow n entrance to the nearby N o rth Sea. The area was named 'E u ro p o o rt'. Based on the findings o f a prelim inary study, it even looked as if a navigation channel able to ac com m odate vessels w ith a draught o f 80 85 feet w o u ld belong to the possibilities. T h e n ew h a rb o u r m o u th a t H o o k o f H o lla n d The new harbour m outh at H ook o f H o l land puts the final touch to the 'master plan' fo r the developm ent o f the R o tte r dam harbour and industry along the left bank o f the N e w W aterw ay. The plan was complied in broad lines by a w o rk com posed by experts fro m th e province o f Zuid Holland, the city o f R otterdam and the State. In 1964, this w o rk group pre- Plan to dig through to the Hook o f Holland, proposed in 17 3 1 by Nicolaas Samuelsz Cru quius. Overview photo Botlek area. The Chemiehaven in the middle, on the left the St. Laurenshaven and in the background, the New Waterway. as A ntw e rp e n and Brugge did, then it would - literally - have to fight a way to the sea' H ow ever, in the year he p re sented his plan, 17 3 1, this was considered to o great a risk. It was only in 1858, w hen the plan was again put fo rw a rd by P ieter Caland, that the governing authorities w e re ready to listen. The plans fo r digging a new passageway w ere realized and in 1872 the firs t sail and steam vessels, equipped w ith compass, sextant, chart, log and b arom eter sailed through the N e w W a te rw a y past the H ook o f Holland o u t to sea. Since that tim e, the num ber o f vessels to navigate w hat has become the econom ic jugular vein o f Europe to R otterdam has risen constantly, aside fro m the disastrous w ar years. T he B o tle k plan Immediately a fte r the second W o rld W ar, the Netherlands was a p o o r co u n try w ith no natural resources. SenW 57STE |A A R G A N G N R 2 73 R o tte rd a m 1990 A bulk carrier is being moored at the Graan Elevator Maatschappij (GEM) B.V. in the Be nelux Harbour (Europoort). In the back ground, the Caland canal and the New Waterway. sented design, a combined harbour m outh fo r E u ro p o o rt and the N e w W aterw ay. The immediate reason fo r building the new harbour m outh at H o o k o f Holland was: a. to make E u ro p o o rt accessible fo r enorm ous vessels expected at the begin ning o f the sixties; b. to be able to accomm odate the stro n g ly developing shipping trade and indus trialization in R otterdam through expan sion o f the p o rt agglomeration. The Havenmonden D epartm ent started w o rk on the com plex o f projects at H ook o f Holland in 1967. The w o rk on the har bour m outh was divided into the follow ing projects: a. construction o f a th re e kilo m e tre n o rth e rn dam, and re ro u tin g a section o f the no rth ern breakw ater; b. construction o f the south dam and em bankment, w ith a total length o f tw elve kilom eters, which encloses the Maas vlakte; c. the removal o f 150 m illion cubic m etres o f sand w ith in this south dam, thereby e x panding the R otterdam p o rt area by 1600 ha. (net). d. construction o f a dividing dam, to sepa rate the N e w W a te rw a y fro m the en trance to E uropoo rt; e. construction o f a new, definite en trance to the E u ro p o o rt area and closing o ff the te m po ra ry entrance, except fo r a small opening fo r barges etc. 74 f. dredging a fairway in the sea tw elve kilom etres long, 400 to 600 m etres wide and 24.5 m etres deep. From sea, the ap proach to this fairw ay is 1200 m etres wide and also 24.5 m etres deep; g. the installation o f m odern nautical equipm ent fo r m o n ito rin g shipping by day and by night, and w hen the vision is poor. h. additional w o rk , such as anti-silting measures and spraying sand o n to the n o rth beach at H o o k o f Holland. In A p ril 19 7 1, the definite entrance to E u ro p o o rt was com pleted. O n June I I 19 7 1 the new harbour m outh, through which E u ro p o o rt acquired a d ire ct passage to the N o rth Sea, was officially opened fo r use when the 'Koningin W ilhelm ina’, fro m the S toom vaart Maatschappij Zeeland navigated the way in by this route. O n board was H e r Majesty Q ueen Juliana. W ith the new, combined ’Maasmond’ (M outh o f the Maas), the approach to the N e w W a te rw a y and E uropo ort acquired an enorm ous, but safe capacity. D e v e lo p m e n t o f S h ipp ing The Shipping industry is characterized to a large e x te n t by only a few types o f ships that are generally w ell know n: super tank ers, bulk carriers and container ships. T a n k e r d e v e lo p m e n t Before the second w o rld war, tankers Ore carrier 'Berge Stahl’, at the dock o f the iron ore terminal Europoort C.V. in the Ca land canal, Europoort. The vessel, 342 me tres long and 63.5 metres in beam, with a height o f 30.2 metres, has a deadweight o f 365.000 tons and a draft o f 74 feet. It's the world’s largest dry bulk carrier as well as the first vessel o f this size to dock at Rotterdam (January 30 1987). Carrying a cargo, a speed o f 13.5 knots can be developed. Iron ore for German steel companies is carried by the 'Berge Stahl' between Brazil and Rotterdam Europoort. Entrance to the New Waterway ( 1983) o f approxim ately 1200 tons, deadweight form ed the m ost com m on and, at the same tim e, largest class o f tankers afloat. ’D eadweight’ is defined as the w eigh t o f Hopper suction dredger and block carrier in action during construction o f the new harbour mouth at Hook o f Holland, 1969. TANKER0EVEL0PMENT the cargo, fuel, oil and provisions together. D uring the second w o rld war, tankers of 1600 tons dw came in to use. Since that tim e, the size o f this type o f ship has con tinued to g ro w . In 1954, the T in a Onassis', a tanker carrying approxim ately 45,000 tons deadweight, was taken in to service in Hamburg. H ow ever, mainly as a result o f the Suez crisis in 1956, w hen the route fro m the oil fields in the M iddle East led around the Cape o f Good Hope, 100,000 to n tankers began to be built. The firs t supertankers w e re b u ilt by Japa nese yards. In 1962 the ’Nissho Maru', carrying 132.000 tons d w was launched, but was soon dw arfed by the appearance o f the 'Idemtsu M aru’ o f 2(0,000 tons dw. (1966). The largest tanker to unload its cargo o f oil at the Maasvlakte O il Terminal in the 8th Petroleum harbour (Maasvlakte) was the ’Batilus", carrying 400,000 tons dw. (1986). This ship has since been dismantled. distributors for Lubbe Bakker Amei'on Marine Coatings Veerhaven 12c 3016 CJ R otterdam N etherlands Tel. 010 - 436 71 30 Fax 010 - 436 38 72 Tlx 25433 LU B A NL WL schroefaslagers en afdichtingen: B redastraat 126 2008 A n tw e rp Tel. 03 / 231 89 25 Tlx 32047 W e ndenstrasse 130 D -2000 H am burg 26 W e st-G e rm an y Tel. 040 - 25 63 70 Fax 0 4 0 - 2 5 16 31 48 Tlx 217 42 01 Bern D EEN PROFESSIONELE BIJDRAGE AAN EEN SCHOON MILIEU De internationale scheepvaart moet aan steeds strengere milieu-eisen voldoen. Olielekkages kunnen dan ook hoge boetes tot gevolg hebben. WL levert hier een afdoend antwoord op met schroefaslagers en afdichtingen die de kans op olielekkages en waterverontreiniging minimaliseren. Klanten kunnen bovendien een beroep doen op de internationale service-organisatie van WL, waardoor reparaties snel en efficiënt worden uitgevoerd. van milieuveilige, betrouwbare en WL W AUKESHA-UPS A76 "UNITED TO SERVE YOU" WAUKESHA-UPS v.o.f. Lipsstraat 52 Postbus 6.5150 BB Orunen Telefoon 04163- 88299 Telex 35185 lips nl Telefax 04163-74853 R o tte rd a m 1990 'Geopotes 14’ carrying out maintenance dredging in the main channel and "Geopotes 15’ spraying sand onto the North Beach at the Hook o f Holland. In the period between March 14 through March 26 1988 (12 days), using a pressure pipe the ’Geopotes 15" sprayed 251,926 m3 onto the beach to replace the sand which had disappeared into the sea. The sand used in this operation came from maintenance dredging activities in the access channel to the New Waterway and Europoort area. By combining the deepening work in the channel with the beach raising activities 'work’ was carried out with other "work" which meant a considerable savings in costs. A d a p tin g th e m a r itim e a pp ro ach channel W hen the w o rk on deepening the m ari tim e approach channel fo r vessels w ith a draft o f 57 feet was being carried out, the city o f R otterdam requested that the chan nel be made accessible fo r ships w ith a d raft o f 62 feet. A t the beginning o f 1969, the channel was able to accommodate drafts o f up to 62 feet and in 1970 fo r ves sels 65 fe e t in draft. In 1976 this was deepened as to be able to accommodate vessels w ith a draft o f 68 feet. O n August I 1983, the channel became accessible to ships o f 70 feet in draft, Janua ry I 19 8 5 ,7 2 fe e t and in February o f 1987, 74 feet in d ra ft (22.50 metres). A flo o d b a r r ie r in th e N e w W a te rw a y Vessels with very deep drafts can enter the harbour mouth from the M ain Trunk Route on the North Sea via a 42 km. approach route consisting o f the 30 km. Eurogeul and the 12 km. Maasgeul. Ships less deep in draft can follow other routes. The Eurogeul and Maas geul can accommodate ships, at high tide, o f 14 foot in draft (approximately 305,000 tons dw.). o f H p lla n d M aasvlakte Sluiter E u r o p o r t a re a in th e SenW 57STE IA A R G A N G N R 2 y e a r 1988 The flood c o n tro l gate in the N e w W a te r way, was developed by the Bouwcom bina tie Maeslant Kering (B M K ) and presented to the ’Flood b a rrie r study c o m m itte e ’ in stitu te d by the M inistry o f Traffic and Pu blic W orks. The flood c o n tro l gate w ith a height o f ap proxim ately 23 metres, w ould serve to shut o ff the N e w W a te rw a y ove r a breadth o f 360 m eters when w a te r levels threaten to rise to exceptional heights in the lo w e r delta o f o u r riv e r area because o f w a te r flooding in fro m the N o rth Sea. The presence o f this gate, able to be closed at dangerously high w a te r levels, w ould substantially reduce the e x te n t to which the dikes w ould have to be raised and hence offers a far quicker and cheaper so lution to the problem o f ho w best to p ro te c t this area. The sector doors in the B.M.K. are made up o f retaining walls w ith floating bodies, whose horizontal loads are passed by means o f tubular lattice girders to large universal rota tin g p ivo t bearings placed on b oth banks. The flood gate was designed to last 100 years, and w ill be used only inci dentally, so that they w ill be alm ost perm a nently in parked position. 77 Zekerheid op zee. AEG biedt u dat m et de nieuw e DEBEG 3120, een co m p acte , sterke en veelzijdige SSB Radiotelefonie zender/ontvanger m et een m eer dan voortreffelijke prijs/kw aliteit-verhouding, Z ’n voornaam ste e ig en scha p pen zijn: O Snelle, autom atische frequentie m atie op aanvraag verkrijgbaar. afstem m ing. O SITO R -ARQ Uitgebreide docum entatie en infor Telex één AEG N ederland N.V., Marine Techno b eroeps AC Rotterdam. Tel. 010 - 4 8 5 5 6 4 4 . m et logy Departm ent, Postbus 5115,3008 antenne mogelijk, O G oedgekeurd voor Fax. 010 - 4 8 4 6 2 7 9 . Telex. 28822. scheepvaart. O Zeer eenvoudige bediening. O O ok goe dg eke urd door de PTT/ O Z e n d v e rm o g e n 2 7 0 w att trans ceiver. KSR. O G eïntegreerd 2-toon alarm. O Frequentiebereik: ontvanger 100 kHz - 3 0 MHz. De DEBEG 3120 kan w orden g eïn zender 1,6 M Hz - 28,5 MHz. stalleerd in losse co m ponenten: O Aansluitspannm g 12 of 24 V DC. transceiver, O M icroprocessor-gestuurd, bedienunit. Dit kan een aanzienlijke sief zelftest program m a. A78 inclu antenne-coupler ruim tebesparing opleveren. en AEG R o tte rd a m 1990 SenW 57STE |A A R G A N G N R 2 79 Complete hydrostatic drives and operation systems. Oil-free gascompressors. Ships reduction- and reverse reduction gears. Twin- and multiple reduction gears. Generator-, sandpump-, cutter- and tumbler drives. Planetary gears for winch and crane drives. Pumpdistribution gears. Shaft journal and thrust bearings. Super elastic clutches and couplings. Torsion-free clutches. Gear wheels and hardening technology. Floating boombarriers, pneumatic oilbarriers. Oilfighting installations. Oil skimmers. Electromagnetic clutches. Pneumatic clutches. High pressure compressors, screw compressors, boxer compressors. Breathing-air compressors. Heat exchangers (oil-, water- and gascoolers, condensers, preheaters). Complete oil- and filter systems. Pressure vessels. Rotary vane compressors and -vacuum pumps for air and gases. Vacuum distillation plants for solvents and waste water. Ij A80 BRUINHOF Boterdiep 37, 3077 AW Rotterdam-Holland Tel. 010 - 4834400. Fax 010 - 4824350. Telex 28904 R o tte rd a m 1990 These specialized experts control shipping from this observation post by means o f wire less communications and radar from the coastal area at Hook o f Holland to the Rot terdam port area. The retaining walls w ill then be in the dry docks constructed on e ith e r side o f the na vigation route. The girders are then above the shore, w here they are p ro te cte d against any collisions which may occur. If necessary, the doors can be closed by being floated mechanically fro m the docks into the N e w W aterw ay, and then being sunk by lettin g w a te r in to the 17 m etre threshold. This contro lled m ethod o f clo sure and the installation o f e x tra sliding gates in the retaining walls w ould enable the flood barrier to be closed and opened under all circumstances and hence fo rm w ith th e ir excellent maintenance and in spection possibilities - an e xtre m e ly relia ble means o f p ro te ctio n o f this vulnerable part o f Holland. The Bouwcom binatie Maeslant Kering is composed o f Hollandsche Beton N.V., Hollandia-Kloos H olding N V , I.G.B. H o ld ing NV, K oninklijke V o lk e r Stevin N V. The N o r th To o ffsh o re a irp o rt S ea W a t does th e fu tu r e hold? They certainly dared to take a risk, the planners o f N e w Holland 2050. In th e ir book w ith this same title ( 1987), th e y de voted a separate section to 'in and o u t the N ew W a te rw a y ’ w here a ra th e r fu tu ris t picture is painted. N ew tra n sp o rt ships, like the hydrofoil ship w here floating containers are driven into and fastened betw een the fo re and aft sections o f the vessel a fte r which the ship speeds unmanned fro m N e w Y o rk to the roadstead o f H o o k o f Holland by means o f hydrofoils. In a blink o f an eye, the con tainers (estimated at 9 million, as co m pared to the three m illion handled in 1988 at R otterdam ) w ill be carried by a subter ranean pipe tra n sp o rt system to the rest o f Europe. This w ill have such a favourable effect on the available space in Europoort/M aasvlak te that the ’map’ o f this area in 2050 w ill become almost embarrassing. The Rozen burg region w ill once again be expanded in w estw ard direction. A miraculous apotheose now seems far away, but n o t impossible: technical devel opments n o t to violate, but to re sto re na ture. SenW 57STE IÀ A R G A N G N R 2 'Term inal v \ dry and K i I iq uich bulk [ TerminaNç containers ) and n e o - ^ P ip e lin e s tre e t^ /?~~~ A s s e m b ly fa c to rie s Europort N a tu r e - a n d recrea tion area Europoort/Maasvlakte (2050) 8I PORTRAIT OF DSS ’ ’ O f the many ships built after the second world war in Rotterdam it seemed appropriate to the editors to include in this special edition, the famous liner which bears the name o f the 650 year old city across the seas o f the world. The twin screw steamship (DSS) Rotterdam, originally built to carry passengers between Rotterdam and New York, now sails the seas o f the world as a cruise ship. The construction o f the ship was commissioned by the Holland-America Line (HAL) and built at the Rotterdamsche Droogdok Maatschappij (RDM). The description o f the ship was compiled from information from a special edition o f ’Schip & W e rf, which was published when the ship was taken into service in September 1959. IN T R O D U C T IO N The realization o f the DSS ’R o tte rd a m ’ is closely related to the loss o f the old 'Statendam' due to w a r activities in May 1940. In principle, the decision to build a new passenger ship to replace the ’Staten dam’ was taken im m ediately after w o rld w ar II ended, in 1945. A new ship, to be em ployed in the passenger service be tw een R otterdam and N e w Y o rk in addi tio n to the famous ’N ie u w A m sterdam ’. H ow e ver, it was only in 1954 th a t a defi nite plan fo r the ship was drafted, a ship which was to cost an estimated D fl 100 m illion to build. This new 'R o tte rd a m ' was to become the fifth liner to bear this name; her predecessors w ere; - The firs t 'R o tterda m ' belonging to the H AL, b u ilt in 1871 in Scotland; the ship measured 1700 g rt and was equipped w ith a 700 ihp com pound steam machine fo r a speed o f 101/2 knots. - The second ’R otte rd a m ’, measuring 3329 g rt, was b u ilt in 1878 in Belfast, purchased in 1886 by the H A L, and scrap ped in 1897 under the name 'Edam'. - The th ird 'R o tterd a m ' also came fro m the shipyard Harland and W o lff in Belfast. The ship, measuring 8200 g rt, was taken in to service in 1897 and later sold to a Danish shipowning company. - The fo u rth ’R otterdam ’, again b u ilt at this same shipyard in Belfast, began her shipping career in 1908. The vessel mea sured 2 4 .148 g rt, could reach a speed o f 17 knots and could carry 2800 passengers. The costs o f construction came to 7 m il lion guilders (see fig. I ). The RDM was commissioned to build the present (fifth ) ship o f this name on O c to ber 26 1955; the vessel was given con stru ctio n num ber 300. O n September 13 1958, the vessel was christened and launched by Queen Juliana (see fig. 2). In July and August o f 1959, the tria l jo u r neys w e re held. The official tria l journey and conveyance to o k place on August 20 and 21 1959. The ship departed on her maiden journey on September 3 1959 from Rotterdam , w ith as guest on board o u r present queen, then still the Princess Beatrix. G ENER ALD ATA Please see the general plan labelled appen d ix I fo r the ship’s layout. 82 fig. I. The fourth Rotterdam 1908-1939 fig. 2. The launching, seen from the river M ain m e a s u re m e n ts : - overall length = 228.12 m - lenght betw een perpendiculars = 198.12m - moulded breadth = 28.65 m - m oulded depth = 21.96 m - Mac. draft = 9.00 m - H eight to deck up per basis = 38.66 m - T o p radar mast = 60.53 m - Gross tonnage = 38,645 tons - N e t Tonnage = 21,848 tons Machine capacity = 35,000 shp Speed = 22 knots Passenger ca rryin g = 1456 persons capacity - C re w = 776 persons - Class; Lloyd’s Register 100 A I The engine ro o m and b o ile r room s are aft in the ship. The c re w has been prim arily SenW 57STE [A A R G A N G N R 2 R o tte rd a m 1990 SenW 57STE IA A R G A N G NR 2 83 84 SenW 57STE |A A R G A N G N R 2 R o tte rd a m 1990 fig. 3. Tourist class diningroom tions, some data have been included on the mess utensils, glasses and linens: The mess utensils include among o th e r things: 9,530 spoons 12,640 tea spoons 11.900 forks 9,830 table knives 1,700 bouillion cups 1,557 coffee and teapots - 1,706 trays - 1,974 soup te rrin s all made o f silver o r porcelain. 18,240 plates 19,650 cups and saucers, and 1,740 tea services Glasware 11,760 beer and b itte r glasses. 5,820 w ine glasses. 4,500 w a te r drinking glasses. The follow ing linen was available: 48,240 napkins 19,000 bath tow els fig. 4. The Auditorium accomodated in the fo re o f the vessel. The ship is virtually e n tire ly a w elded steel con struction; it has been divided in to 14 com partments by I 3 w a te rp ro o f partitions and designed to resemble a tw o -c o m p a rtm e n t ship. A ll deck houses above the sun deck are o f aluminium. The in te rio r was designed by several a r chitects. In figure 3 through 6, examples o f this have been provided. The auditorium (fig 4) measuring I ; 24 m „ b: 20 m. and 5.60 m. at the highest po in t can hold a to ta l o f 607 persons including those on the bal cony. T he h o te l o p e ra tio n s In addition to the many types o f cabins the ships also features a num ber o f restaurants w ith the accompanying galleys and storage areas. T o provide an idea o f these operafig. 5. Lounge and dance floor SenW 57STE IA A R G A N G N R 2 fig. 6. The 'Ritz Carlton 85 fig. 7. Cabin first class The dining ro o m fo r passengers travelling firs t class offers 296 seats, the to u ris t class dining room seats 562. Relaxation and en te rta in m e n t facilities fo r passengers in clude theater, various bars, fitness rooms, swimm ing pool, sports deck and pro m enade decks. The passengers are cared fo r by a civil ser vice staff o f 600. The full crew o f 776 per sons are accommodated in 2 15 cabins o f varying size and type. They have th e ir ow n deck area and mess rooms. The laundry is run by a staff o f 22; three persons are employed on board in the ship’s o w n prin tin g office. The medical team consists o f a d o c to r and dentist as w ell as a number o f nurses. They carry out th e ir w o rk in tw o consulting rooms, an operating room , an infirm ary and five sick rooms. A ll cabins, room s and o th e r areas on board are naturally fully air-con ditioned. N a u tic a l e q u ip m e n t Using the m ost m odern and sophisticated technology available at the tim e the ship was taken in to service, the bridge was equipped fo r th re e functions: navigation, safety and comm unication. The life saving equipm ent includes among o th e r things 16 mechanically propelled life-boats fo r 135 persons and tw o m o to r life boats fo r 43 persons. The life boats are m ounted in rolle r-g ra vity davits. deck equipm ent includes: - a tw in anchor winch - a tw in servo-actuated steering gear - th re e capstans - deck cranes and cargo booms fig. 9. HP turbine fig. 8. Cabin tourist class 38,250 hand tow els 16,900 sheets i 1,950 pillowcases. Passengers can be accomodated in various types o f cabins: 12 luxurious cabins - 121 firs t class cabins fo r 295 passengers (see fig. 7) - 443 to u ris t class cabins fo r 1, 137 passen gers (see fig. 8) 86 SenW 57STE IA A R G A N G N R 2 R o tte rd a m 1990 IN D E L IN G M A C H IN E K A M E R M w o rt béj * «Mro VÜ0O«« ..St**» •» W « rT - benW 57STE IA A R G A N G N R 2 «OTTUDAM IM » 87 REVOLUTIONAIRE DOORBRAAK IN SMERING EN ONDERHOUD SCHEEPS DIESELMOTOREN REVOLUTIONAIRE DOORBRAAK IN SMERING EN ONDERHOUD SCHEEPSDIESELMOTOREN • 50% langere levensduur • na minimaal 2.500 a 3.000 uur olie verversen • 75% minder afvalolie • schoner milieu • snel terugverdiend BLACK-SLUDGE BEDREIGT ELKE SCHEEPSDIESEL Vervuiling is de belangrijkste oorzaak van slijtage aan scheepsdieselmotoren. Roet, me taal- en stofdeeltjes vormen de beruchte 'black sïudge'. Daardoor vermindert de warmte-afvoer en door aankoeksels verliest de motor com pressie, presteert steeds slechter en verbruikt meer olie. Alleen frequente verversing van de kostbare smeerolie kon deze schadelijke effecten tot dusver tegengaan. NTZ-OLIEFILTER BESCHERMT EFFECTIEF EN BESPAART TEGELIJK VEEL GELD. 50% minder motorslijtage. Met het revolutionaire NTZ-oliefilter blijft de motor veel langer schoon. Slijtage wordt tot 50% beperkt. Dus: permanente besparing op de onderhoudskosten! Smeerolie gaat minimaal 4x langer mee. De smeerolie blijft met het fijne NTZ-filfer minimaal 4x langer op specificatie en hoeft pas na 2.500 a 3.000 draaiuren te worden ververst. Dus: minder oliekosten en een grotere inzetbaarheid van het schip. A88 Schoner milieu dankzij 75% minder afvalolie. Met het NTZ-oliefilter wordt 75% minder afvalolie aangeboden. Dus: minder verwer kingskosten en een schoner milieu. Snelle terugverdientijd. Het NTZ-oliefilter kan volgens het bypass-principe eenvoudig op elke bestaande en nieuwe scheepsdieselmotor worden ge ïnstalleerd. Met de aanschaf is een kleine investering gemoeid die gemiddeld binnen één jaar wordt terugverdiend. N TZ-verkooppunt dichtbij u in de buurt. NTZ-oliefilters worden verkocht en ge ïnstalleerd via de dichtvertakte verkooporgani satie van Brinkmann & Niemeijer B.V. Een lijst van voorraadhoudende verkooppunten en ge detailleerde documentatie kunt u opvragen bij : BRINKMANN & ü fa NIEMEIJER B.V. ÜLI Pollaan 50, Zutphen Postbus 39 7200 AA Zutphen, Holland Telefoon 31(0)5750-96730* Telex 49143 Telefax 31 (0)5750-96799 R o tterdam 1990 fig. 10. IP turbine 10) and a LP-turbine (fig. 11 ). A t the fro n t o f the M P -turbine is the HP-reverse tu r bine (fig. 12) Both main tu rb in e groups have been de signed fo r nominal continuous operation o f 17,500 shp at 131.5 rev/m in. Maximum p o w e r is 19,250 shp per shaft at I 35.5 rev/ min. A stern p o w e r is 10,500 per 108 rev/ min. Steam conditions on entrance o f the H P-turbines are 42,2 ato and 446 °C. The steam finally reaches the condenser w ith a 96.5% vacuum at a seawater tem perature o f I5°C. Per condenser a maximum o f .4,400 tons per hour o f cooling sea salt wa te r is available. In the gearboxes (fig. I 3). the speed o f re volutions o f the H P-turbine (4250), the M P -turbine (4250) and the LP-turbine (2980) are reduced to the speed o f the shaft (131.5) by means o f double reduc tion. A view o f the B B-turbine installation fro m above is shown in fig. 4. The ship is fitte d w ith stabilizers, and elevators and goods elevators fo r internal transportation. P R O P U L S IO N A N D G E N E R A T IO N O F EN E R G Y G eneral The e ntire engine and bo iler installation o f the ship is spread over six w a te rtig h t com- S te a m b o ile rs In the b o iler room are fo u r oil fired boilers, C om bustion Engineering type V.2. M. (see fig. 15). B oiler data; - Steam pressure = 45 ato. - Steam te m perature = 460 °C - Steam production = 55 tons/hour (max.) - V.O . B oiler = 802 m2 - V.O . superheating = 144 m2 - V .O . econom iser = 612 m2 fîg. I I . HP astern turbine Four burners have been b uilt in to each b o ile r operating according to the C o n stant Pressure D ifference principle. The com plete propulsion installation was b u ilt by the Kon. Mij. De Schelde in Vlissingen. partments and a shaft tunnel (see appendix 2). The shaft tunnel is aft o f the main engine room, and follow ed, in the dire ctio n o f the foreship, by: the boiler room , the evaporator room , the electrical supply sta tion, the engine ro o m fo r air tre a tm e n t fig. 12. LP turbine and stabilizers and finally, the freezing en gine room . M ain tu rb in e s For each shaft in the engine room there is: an H P -turbine (fig. 9), an M P -turbine (fig. fig. 13. Gearbox G e n e ra to rs and E le c tric a l In s ta lla tio n F our com plete W e rk s p o o r tu rb o generators have been installed in the elec trical p o w e r supply, each w ith a capacity o f 1,350 k W at 6000 rev/m in. The Your Supplier fo r s e a w a te r resistant and w a te rtig h t ship's w in d o w s , sidelights and bullseyes H. K. VAN WINGERDEN EN ZONEN B.V. P.O. Box 6 • Telephone (01830) 31555 - Telex 21615 Fax (01830)31442 4200 A A G o rin c h e m -H o lla n d ESTABLISHED SINCE 1883 We d o n 't p retend to kn ow everything U IT V O O R R A A D LE V E R B A A R MEMARCO R O E S T V R IJS T A LE N - B U IZE N - F IT T IN G E N - FLEN ZEN - A F S L U IT E R S - MECHANICAL AND MARINE CONSULTANTS We provide: D ra ftin g Design E nginee ring S u p e rvisio n P ro je ctm an ag e m e nt S urvey R O E S T V R IJS T A L E N For: S h ip b u ild e rs C o n stru ctio n co m pa nie s O il & Gas In d u s trie GELASTE BUIZEN NAADLOZE BUIZEN INSTRUMENTATIE BUIZEN, MYDRAULIEKBUIZEN M AC MINE PUP LASFITTINGIN BSP GASORAADFITTINGIN SNIJRING KOPPELINGEN TWIN FERRULE KOPPELINGEN GESMEDE NPT EN SW FITTINGEN FLENZEN KOGELAFSLUITERS SCHUIF EN KLEPAFSIUITERS TERUGSLAGKLEPPEN tParoPo: voor snelle levering en goede service on site or in our office: VAN MALSENSTRAAT 66 3074 PX ROTTERDAM TELEPHONE: 010-4326789 FAX:010-4192121 HANDELMIJ ( I ROESTVRIJ B.V. Vossenbeemd 109 - Postbus 1111 5 70 0 BC Helmond Telefoon: 0 4 9 2 0 -4 6 5 5 5 Telex: 592 0 8 rvrij - Telefax: 0 49 2 0 -3 3 9 2 2 Weir Engineering Services The Netherlands BV IVEM CAPABILITY FOR MARINE EQUIPMENT SALES and SERVICE: PUM PS HEAT EXCHANGERS DISTILLERS DIESELENGINES PROPELLERS ALTERNATORS ELECTRIC MOTORS haven nr. 114 Schaardijk 81, 3063 NH R’dam. Telefax (010) 452 90 46 Postbus/P.0. box 5170,3008 AD R’dam. Tel. (010) 452 85 50. telex 27383 WEIR NL A90 R o tte rd a m 1990 fig. 14. Port steamburbine set generators, supplied by Smit S likkerveer (now called H O LE C ) have a continuous capacity o f 1685 kV A at 1800 rev/min., 60 Hz, cos (phi) = 0.8. An auxiliary generator driven by a gas tu r- - fig. 15. Cross-section o f boiler ------------- 9 6 6 0 ------------------------ bine has been installed in the structure on the sun deck. This generator has a capacity o f 350 k W at 1800 rev/m in.; the speed of revolutions o f the gas tu rb in e reaches 15,000 rev/m in. A n emergency ac cumulator b attery o f 110 V and 900 A h has been included w ith the auxiliary generator. The various currents on board are: - 3 x 440 V 60 Hz fo r the p o w e r system - 3 x 220 V 60 Hz fo r the galley, laundrey, etc. - 3 X 110 V 60 Hz fo r smaller appliances - I X I 10 V 60 Hz fo r lighting - 220 V DC fo r cranes, winches etc. - I 10 V DC fo r em ergency lighting 24 V DC fo r telephones, bell systems etc. The main switchboard has been located in the electric p o w e r supply station (see fig. 16). Finally there are also tw o storage cooling installations, one in the shaft tunnel an one in the foreship; these installations have a total cooling capacity o f I 37,800 Kcal/hr. — | The second is ir. K. van d e r Pols, fo rm e r chairman o f o u r association and d ire c to r o f RDM at the tim e the ship was under con struction. A t the gala dinner during the o f ficial tria l journey and transfer o f the ship, he made the follow ing toast: 'May this new ship increase the respect fo r the Holland Am erica Line, fo r the city whose name she bears and fo r o u r beloved fatherland.’ D uring this official trial journey on August 20 1959, on the open sea, in the presence o f H e r Majesty the Queen, the ship was transferred by d ire c to r ir. K. van der Pols to H A L d ire c to r W . H. de Monchy. The la tte r mentioned transferred the ship's command to C o m m o d o re C. Bouman. A t the changing o f the flag, the cerem ony was led by M inister President prof. De Quay, w h o also on this occasion invested ir. Van der Pols w ith the o rd e r o f Ridder in de O rd e van de Nederlandse Leeuw. fig. 16. Main switch board with two turbo generators Final re m a rk s As may be expected, a large num ber o f members o f o u r association the N e th e r lands Society o f Marine Technologists w ere involved in the construction o f this ship. I w ould like to take advantage o f this op purtun ity to m ention tw o o f o u r most senior members. The first is ir. G. Knop, fo rm e r d ire c to r o f the H A L w ho was closely involved in firs t the design and later in th e inspection o f construction activities o f this magnificent ship, which was to be the last he w ould build during the active part o f his career. SenW 57STE jA A R G A N G N R 2 91 SHIPBUILDING AND THE TRADE UNIONS By H. F. Berkhout, District Head, District ofZuid-Holland, FNV Building a ship is cooperative project. The ship which you have built is the best in the world and much better than any other built by the shipyard down the road. As every insider knows, the twentieth launching is an experience every bit as memorable as the first. Building ships is more than just a job! This sounds almost lyrical and it is. But why else would we christen ships, and not cars and trains which, after all, are also merely means o f transportation? The trade unions, in this case the industrial union FNV, is no stranger to the shipbuild ing industry. F or years, the union has been involved in im proving em ploym ent condi tions and job op portu n itie s in this indus trial branch. A m ong o th e r things. Y et in the shipbuilding industry m ore often than n o t the unions are given publicity only when groups o f w o rrie d w o rke rs amass in fro n t o f the gates o r employees in the ship building branch go on strike again gru m b l ing. Shipbuilders are confident and skilled craftsmen. They are perfectly aware o f th e ir rights and w ould surely make th e ir displeasure clearly known. The outsider is th ere fo re apt to draw the w ro n g conclu sions. T o learn m ore about the history o f the shipbuilding industry and the trade unions, a good book to read is ’H eet v o o r de vuren' by Jan de W acht. He was a fo rm e r ad m inistrator at the General D utch Metal In dustry Union. The book was published to com m em orate the fiftie th anniversary o f the R otterdam branch. D uring this period, the foundations fo r labor relations and mutual opinions w e re laid. The shipbuilding branch is characterized by the enorm ous change which has taken place both as regards technology and size o f the ships. Much has changed in this area. These changes tended to be initiated by the shipowners and n o t by the yards. The shipyards kept abreast o f the develop ments and adapted th e ir m ethods accord ingly. Shipbuilding has also changed due to the use o f different and b e tte r materials. D e sign and production have been partly auto mated. A n o th e r developm ent was that of, fo r example, block construction. A ll this became possible through the technological developments. The m ost recent is th a t o f construction onder cover. A ll these chang es have taken place in the face o f a new crisis in shipbuilding. Before the second w o rld w ar, recurring crises w e re usual in this branch o f industry. H ow ever, w estern european shipbuilders held a certain m onopoly at that time. Europe was still th e ce n te r o f the w o rld on the map. Trade flow e d to and fro m this center, w hich also form ed the focal po in t o f political pow er. Crises in shipbuilding 92 w e re cyclic and European in nature. A fte r the war, at firs t everything seemed fine. Every-where, activities resumed. Ships w e re necessary, and shipyards had m ore than enough w o rk . Y e t the shipbuilding in dustry in the N etherlands began to show signs o f ailing. A t the end o f the sixties, var ious re p o rts containing recom mendations w e re compiled. O ne o f these was the Winsemius re p o rt. The governm ent then in p o w e r had requested an o rd e rly review o f the D utch shipbuilding industry. The re p o rt dealt less w ith the industry as w ith the balances o f p o w e r and capital. A t the tim e, V erolm e was building his empire. And that w hile he was being opposed by traditional shipbuilders and the Winsemius C o m m it tee. In the meantime, a new crisis in ship building was sparked o ff by the oil crises o f 1973. It became rapidly evident that the branch was n o t going to be able to survive on its ow n. G overnm ental aid was re quired. A collective e ffo rt on the p a rt o f employees and em ployers resulted in the foundation o f the Shipbuilding Industry Policy C o m m itte e , w hich made e x tra fi nancial aid to the industry possible. Y e t this crisis was diffe re n t fro m those o f before the war. The w o rld , to o , had chang ed. Europe was no longer the great center o f p o w e r it had been before the w ar. It was the Japanese w ho had bro u g h t this about. As a result o f the lo w e r wages and the Japanese a ttitu d e tow ards w o rk , they w e re able to build ships cheaper than was possible in Europe. Part o f the Japanese ap proach was adopted during that tim e, such as the practice o f employing as few as pos sible ow n pro d u ctio n team. Some yards even became largely dependent on Yugo slavian w o rke rs and contractors. The D utch shipbuilding industry began to de cline at a rapid pace. Yard a fte r yard was closed down. O fficially this was know n as Y estructuralization’. And that w hile the D utch governm ent was pumping funds in to the industry. Finally, after the industry had been seriously weakened, some o f the recom m endations made by the Shipbuild ing Industrial Policy C o m m itte e w e re im plem ented. N e w p ro d u ctio n methods ap plied in newly roofed yards represent the result. The Shipbuilding Industrial Policy C o m m itte e has meanwhile been dis banded, and a new fo rm o f support is now provided. H ow ever, th e re is just one m ore point. All re p o rts have a social section. It always con cerns the social structure, such as redun dance. Social innovaton, differe nt w o rk o r ganizations, the fact that employees con s titu te the main capital o f the industrial branch is never discussed. Paper galore! Enough to fill the hold o f a ship has been published on the subject. But now here is this m entioned in any o f the re p o rts on the shipbuilding industry. Personnel policy was, and was to remain no m ore than per sonnel management. W h a t used to be one by the doorm an o r the bookkeeper is now the task o f the personnel departm ent. In many cases, it was painfully obvious that this departm ent had been little m ore than an afterthought. A w ooden shed, is no e x ception. T here was no question o f social innovation. Initiatives in this d ire ctio n have always been taken by the trade unions. W h e th e r these concerned the abolition o f the ta riff system o r a new system o f job classification. But never w e re these consi dered part o f a com m on idea that there w e re o th e r, b e tte r ways. O n the contrary, b itte r negotiations and endless amend ments always accompanied innovations put fo rw a rd by the unions. Clearly, this c o n tri buted little to solve the problems. Especially w hen many cases w e re left to fester, becoming an issue, sometimes lead ing to a strike. I can rem em ber a day during the seventies which w e spent tog e th e r w ith Mr. S tikker fro m Rijn-Schelde-Verolme, brainstorm ing the problem s in the shipbuilding industry. That was the day I put fo rw a rd the proposal to tu rn one yard in to a te s t yard. W e w ould allow no tradiSenW 57STE jA A R G A N G N R 2 R o tte rd a m 1990 tional obstacles to stand in o u r way, and the results w ould n o t be considered as a precedent in o th e r negotiations. It was a serious a tte m p t to set up new w o rk forms, to make use o f the skills and the feeling o f responsibility o f the employees. In short, an e ffo rt to p ro m o te the necesary and de sired m ultifunctional flexib ility. Late that evening, S tikke r utte re d the historical words ’Does this mean everyone w ill move into a higher function group?' It was then that I gave up. S tikke r w e n t on to study Chinese philosophy via a parlementary investigation - RSV applied fo r a m oratorium . A classic case illustrating opinions held by the various people about one another. A union leader can only w ant more. Managing a company o r knowledge o f how this should be run, are m atters he supposedly know s nothing about. A t this m om ent, the re is nothing to dis prove this. W hen RSV started to collapse, the employers used us to influence political decision making, as w e w e re such a w o n derful means to put on the pressure. Despite the cynical re p o rts o f the union results in the past, I am still convinced that there is certainly a fu ture fo r the shipbuild ing industry. H ow ever, firs t a number o f conditions must be met. If R otterdam , as the largest p o rt o f the w o rld , wishes to represent a m aritim e nation at its 650th anniversary celebration, now is the tim e to take the chance offered. The m arket is re covering, the prospects lo o k good. The tim e has come to grasp this last straw w ith both hands. O f course, it is n o t that easy. Dangers are lying in w a it everyw here. Ja pan - after a period o f re s tric tio n - is again starting up. The U nited States are coming back in the m arket. Subsidies are coming to an end. Recently, consultations regarding these subsidies to o k place in Brussels. Frequently mentioned w ords w e re 'Japan' and 'finan cial aid’. O f course, financial aid is neces sary, but n o t only that. Japan is a fact o f life, and w e need to acknowledge th a t the Japanese have perform ed b e tte r under the present circumstances. But they should n o t be blamed fo r o u r problems. W e must w o rk to emerge fro m this impasse by stimulating o u r available resources and m otivating people to collective action. W h ile this w ill n o t be simple, it is the only way to create chances. For the tim e being, how ever, o th e r threats have loomed. The shortage o f p e r sonnel is both cyclic and structural. The im age o f this industrial branch has reached an all-tim e low . Several m illion guilders have reserved fo r e ffo rts to im prove this. U n fortunately, this w ill co n trib u te little to so cial innovation. Especially n o t when the FME, the social partner w h o has always taken care n o t to become involved in the shipbuilding industry negotiations, has put fo rw a rd proposals to effectively tu rn back the clock. A b o litio n o f collective educa tio n and training possibilities, cancellation o f early re tire m e n t schemes, reinstating Saturday as a regular w orkday w ith o u t e x tra pay - all o f which am ount m ore to a declaration o f w a r than a co n trib u tio n to e xp loring o th e r w o rkin g forms. And aside fro m the o th e r problems on the labor m ar k e t which have been suggested to be re solved by hiring Spaniards and Portuguese. W h y n o t just give Spain the financial sup p o rt reserved fo r the shipbuilding industry are the nearly audible thoughts o f political The Hague. Perhaps the regular con trib u to rs to this magazine could come up w ith a form ula fo r this? That could make a real difference. The people in the ship building industry still take pride in th e ir w o rk , but it remains a fact th a t ships have to b uilt by people. SMEER-CASE U kunt uw onderhoudspatroon flink verbeteren. Door permanent èn goedkoper te smeren. Met Perma automatische smeerpatronen van Festo. Permanent smeren: m et Perma continu-smeerpatronen vervangt u het periodieke handsmeren door een voortdurende, gelijkmatig gedoseerde smering. U monteert eenvousmeerpatroon op de plaats van een smeernippel. Dat is uw olie- of vetsmering voor maanden verzekerd, ook op bereikbare plaatsen. Goedkoper smeren: u maakt een einde aan het arbeidsintensieve handsmeren en aan stilstand wegens onderhoud of schade door nalatigheid. Stap daarom over op een ander smeerpatroon. Op een Perma-smeerpatroon, want smeren kan permanent goedkoper en beter. Wilt u meer weten? Vraag meteen de brochure aan bij Festo B.V., Antwoordnum m er 465, 560 0 WC Eindhoven. Tel. 0 4 0 -4 4 3 8 2 5 . Ik wil meer weten over de voordelen, de mogelijkheden en de werking van de Perma-smeerpatroon. Stuur mij uw documentatie. Naam bedrijf: Contactpersoon: Postcode/Plaats:_____________________________ saw 12-02 Coupon ongefrankeerd opsturen naar: Festo B.V., Antwoordnr. 465, 5600 WC Eindhoven. SenW 57STE |A A R G A N G N R 2 93 Marine Structure Consultants Design, engineering and consultancy for jack-ups, semi-submersibles and workships. 26,000 tonnes handled in bits and bytes. For the transportation of the Ekofisk Barrier bases we checked the stresses in carrier and concrete in the seaway to be expected. We have developed highly efficient computer software to handle the many and diverse problems of structures in the dynamic environ ment of the sea. Call us when you need a fast, dependable solution. Marine Structure Consultants (MSC) bv A94 s-G ravelandsew eg 557 P.O. Box 687, 3100 AR S chiedam The N etherlands Telephone: (+ 3 1 -1 0 ) 426 0426 Telefax : (+ 3 1 -1 0 ) 473 3338 Telex : 225628 THE DEVELOPMENT IN SHIP DESIGN FROM WORLD WAR II TO THE PRESENT In this article, a look is taken at the development o f the cargo liner since the end o f the second world war up to the time o f the first container ships. Their design, and the more or less parallel development o f the Ro-Ro ships and the so-called multipurpose ships is then subsequently discussed. In addition, trampers and their gradual replacement by bulk carriers, tankers and passenger ships is also briefly examined. The fle e t in 1945 The Netherlands lost approxim ately 60% of its prew ar capacity - some 525 ships amounting to 1.7 m illion GRT. The firs t ad ditions made to the fle e t consisted prim ar ily o f American standard ships o f the Lib e r ty, V ictory and Baby fla tto p type, plus C.3 ships built shortly a fte r the w ar. A num ber of ships which had been captured fro m the Germans plus various vessels which had been under construction and could only be completed after the war, w e re later ad ded. The firs t big ships which had been ordered by the shipping companies after the war w e re taken into service in 1948. These w ere sister ships to p re w a r type ships which had undergone slight modifica tions, such as the Garoet-Slam at fro m the KRL. Smaller types, many o f which w ere built fo r the KPM, and coasters had been completed earlier. By the end o f 1949, the Dutch fleet had regained its prew ar strength. C o n s tru c tio n o f n e w ships fr o m 1949 o n w a rd It was then the construction o f new ly de signed ships also started to pick up. A good example o f these are the W O N O ships from the KRL, a sh o rt description o f which follow s here: The vessels w e re open shelter deckers, and had a carrying capacity o f 10,700 tons, and a speed o f 16 knots; w ith a view to larger deck cargos, these vessels had been b uilt w ith beams o f o ver 20 m „ a m e te r m ore than the G a ro e t class. Power 7500 SHP w ith 12 passengers. The ships had 5 cargo holds, and a c re w o f ap proxim ately 55. fig. I M. S. Garoet T ra d itio n dictated that the sailors, grea sers and p e tty officers had th e ir accomm o dations aft, and the o th e r cre w members w e re housed in a compact deck house above the engine ro o m betw een hold 3 and 4. This com pact deck house had been copied fro m the C. 3 ships and was an e n o r mous im provem ent o ve r the split upper deck found in many o f the p re w a r ships. N early everyone had th e ir ow n cabin. The ships w e re equipped w ith a single p ro peller. They w ould have probably had tw in propellers if they had been b u ilt before the war. Compare, fo r example, the G aroet type - 8400 SHP - 16 knots. The low-speed diesel engine was clearly al ready in developm ent. The main engine ran on residual fuel oil. The existing fleet was converted fo r this. The Lloyd and the SMN, to o , often carried liquid cargos fro m Indonesia. The W onos w e re th e re fo re equipped w ith eight 250to n and fo u r 500-ton tanks. The firs t in hold 4, n e xt to the tunnel, the second high up, in hold 3. The vegetable oils needed to be heated during the voyage. This was achieved w ith steam by means o f coils. The tanks w e re also used fo r d ry cargos and w a te r ballast. In the case o f dry cargo, a flo o r ceiling was laid o ver the flo o r coils on the double b o tto m , and the hatches had been b u ilt as w ide as possible to enable bulk cargo to be loaded as good as pos sible. The tw eendeck hatches o f the d ry holds w e re closed w ith norm al type w ooden covers. These had the same size all th ro u g h o u t the ship to avoid w ro n g de liveries when they needed to be replaced. Because the ships w e re shelter deck ves sels, they featured the w e ll-kno w n (n o to rious) 23 cm high coamings on the upper tweendeck. T o make dragging the cargo fro m the sides on the hatch easier and to avoid damage, small ramps had been fig. 2 M. S. Wonogiri SenW 57STÉ jA A R G A N G N R 2 95 Technological developments Industrial automation System integration and automation 1 ! I Logistic support, transfer of technology N ed erlan dse V erenigde S c h e e p s b o u w Bureaus P.O. B o x 1 6 3 5 0 ,2 5 0 0 BJ The H ague Phone: ( + 3170) 3497979. T elex 31640 g en uf nl. Fax: ( + 3170) 3854460 COST-EFFECTIVE SOLUTIONS FOR A96 YOUR REQUIREMENTS R o tte rd a m 1990 UPPERDECK (SHELTERDECK) These objections became greater as tim e w e n t on - and the wages increased. S to w in g I p----------------NOT FLUSH! è fig. 3 Cross-section shelter-decker welded on deck. The vertical side o f those ramps had been built in such a way as to support the batten wedges. A fte r these w ere no longer legally re quired,, these coamings w e re countersunk in the new er shelter-deck ships, to make the use o f fo rk lift trucks possible. H o w ever, fo rk lift trucks could n o t be driven over the wooden hatches as this w ould create an excessively high local load. Many of the w ooden hatches on existing ships were replaced w ith aluminium ones during that time. In im itation o f the C.3 ships, the hatchways in the upper deck had been f it ted w ith loose pontoon covers instead o f the m ore usual w ooden hatches. They were less liable to be beaten in during a storm, stronger and flat. And labour saving. W hen recovering the holds they could be pulled in to place using a cargo runner if the spread o f the d e rric k should prove inadequate. It must be acknow led ged that the C.3 ships w e re , in many ways, good carriers. The vessels w e re also equipped w ith tw o 2.65 T derricks, which w e re generally un rigged according to the practice o f the time (even the lightest equipm ent was par tially unrigged on long sea voyages during these firs t years.) These masts had one light pendant tackle, adjusted in such a way that the pull required by the cargo winch and sling winch w ould be the same. If the mast had to swing o u t far, th re e brails were necessary (one inside and tw o o u t- SenWT7SÏ~E jAARG ANG N R T side). The steel w ire o f the brail tackle was as strong as the cargo runner o f the light tackle (usually 3 tons). It to o k many hours fo r the c re w to rig the vessel m oreover, w hile the brails w e re being rigged, the light tackle was te m p o ra rily blocked. S tow ing away the cargo was all manually carried o u t fo r a long tim e. The tw eendecks w e re packed in tw o layers as the height to be loaded - 2.40-3.20 m was simply beyond the reach o f human beings. If a tw eendeck was n o t com pletely filled in one p o rt, the cargo had to be w ell secured. W oo d e n shores w e re used to do this, fas tened above and below depending on the fastening possibilities, and often supported by support stanchions placed at an angle. A ll in all a great deal o f carpentry w o rk was necessary in o rd e r to ensure that the cargo could be transported safely and properly. A large am ount o f dunnage w o o d was used. Many cargos w e re not p e rm itte d to be d ire ctly loaded o n to the steel deck, and dunnage w o o d was used betw een the o f ten w e t, uneven layers. If, fo r example, th e re w e re new cars to be transported, these w ould often be placed on a layer o f cargo covered w ith tw o layers o f dunnage w o o d (double dunnage). It is nearly impos sible nowadays to imagine the am ount o f manual labour involved in loading a ship o f - 650 000 CFT o r 18 500 m 3! The to ta l production o f the ship was low. (-4 0 % at sea, 12% anchoring-m ooring, 27% waiting, 2 1% loading and unloading). M ooring was also a slow process. The m ooring cables w e re pulled in and held taut o ve r a warping and o f the anchor fig. 4 Stowing 97 TO P E N G!f =c v/\/o o I Q \A / 1r P — » C ,2 « « > Il a 4 4 a » - Z.AW KHD A Z m D E U TZ M W M M O TO REN B.V. a . IK H D I Sluisjesdi|k 145, Postbus59036, 30 06PA Rotterdam, TelefoonOIO -428 7399, Telefax01 0-4 29 19 88 À KHD DEUTZ SERVICE SPARE PARTS DEUTZ ENGINE SALES A R o tte rd a m 1990 winch, a warping winch (aft) and some times a cargo winch. A ll steel cables had to be stopped (held taut by means o f a small chain) and subsequently belayed on the bollards, after w hich the stops w e re removed. Also, the antennas betw een the masts had to be taken down. In the above, I have attem pted to provide some idea o f the design, fittin g and use o f freighters betw een 1950 and 1955. A fte r this tim e faster ships came into use. The most significant changes which w ere made are discussed below. P e r io d 19 5 6 - 1962 Between 1956 and 1962, ships ware taken into service w hich w ere approxim ately 2 knots faster (18 knots). This had become necessary due to the com petitiveness o f the market. As a result, they w e re also around 6 m eters longer. The num ber o f holds was 6 o r 5. If there w e re 6, then the engine room was located betw een hold 4 and 5. The p o w e r required was 1050011000 SHP. As the main engines w e re al ready ’supercharged’, the engine room was not required to be any longer. The propeller stern-fram e was enlarged some what, but remained closed although condi tions immediately above the p ro p e lle r be came barely acceptable. Hatches The upper deck hatches w e re generally o f the MacGregor single pull type. Battening down was no longer necessary, n o r w ere tarpaulins, through which a great amount o f tim e was saved. The deep tank hatches were all hinged. Loading G e ar This remained essentially unchanged. The light gear was suited fo r transferring 3 tons instead o f 2 tons. The 10 to n equipm ent was used on m ore hatches and adjusted in such a way th a t the pendant on a w inch o f the mast on deck could be adjusted w hile loaded. This made ’spottin g’ possible - setting car go down on a precisely designated site. The heavy loading gear was b u ilt fo r a grea te r capacity. Hoisting capacity rose firs t to 85 and then 120 tons. The plain, often square-shaped masts w e re replaced by round masts o f high-quality steel. Good examples o f these types ships are the: KRL M-Lloyd and S-Lloyd types SMN Karachi and N edereem s type VNS S-Kerk type H A L G -D ijk class. become m ore im p o rta n t to ensure th a t the smoothest possible inflow was created fo r the propeller, which had to absorb the enorm ous expansion in p o w e r (approx. 17000 SHP). The p ro p e lle r frame was fre quently ’open’, i.e. no plate supporting the ru d d e r post at the base was mounted. N o t all the designs w e re equally successful w ith regard to the amount o f vibration. This was not so surprising as the p o w e r handled by a single screw shot up, allowing no tim e fo r a gradual adjustment to the new situation. The shape o f the frame tended to be conventional; the after body acquired a sharper line. L ittle was know n about the influence o f the shape o f the frame on the inflow field. The design o f the propeller, to o , was aimed prim arily at achieving the highest possible efficiency. The blade was shaped m ore like a ’machete’ than the ’sickle' found today, w hich had to cut through the regularity o f the inflow field. The flat stern, to o , was also introduced around this time. Some designs had an enorm ous bulb which was practically cylindrical in cross-section. If the d ra ft fo re was sufficient - and the bulb was almost com pletely submerged and the sea was m oderate, this w o rke d w ell. If this was n o t far enough under w a te r, it had no, o r even an adverse effect. Since that tim e a great deal o f study has been devoted to the shapes o f bulbs, and this now can w o rk w ell on freighters w ith in a certain draft and speed range. L a y o u t o f th e ship The engine room was generally located as far aft as possible, to reserve the section amidships fo r the cargo. This had always been striven for, but had become m ore im p o rta n t as the ships g re w faster and hence m ore sharp in shape. The holds amidships generally th e re w e re 3 - w e re equipped w ith three w ide hatchways, in o rd e r to re s tric t stowage below deck as far as possi ble. These hatchways w e re covered as a rule by hydraulically operated steel hatches. S tre n g th The axial strength also started to demand a ttention, as did the problem o f torsion. H ere to o , only scanty knowledge was available about the load to which the hull was subjected, especially at sea. M oreover, nowadays there are far b e tte r calculation m ethods available which allow the tension and material dimensions to be far m ore ac curately determ ined. H e a v y lo a d in g g e a r fo re In the fo re body - hatchway I and 2 - usu ally one hatchway was installed. A certain amount o f free deck surface was desirable fo r general deck cargo o r heavy cargo. Here, to o , was w here the heavy loading equipm ent stood. O fte n , a Stiilcken d e r rick boom was included. This had the ad vantage o f being able to w o rk in tw o holds at the same time. If this was n o t required, then it functioned as a d e rric k w ith tw o pendants, sufficiently far apart to ensure the stability o f the d e rric k when making a list in o utboard position. The heavy gear was now at any rate independent fro m the light tackle and was always on standby. L ig h t lo a d in g gear If this consisted o f derricks, the equipm ent had been automated. The capacity was 5 and 10 tons, w ith coupled cargo runners 3 tons. A pair o f derricks (P-SB) operated using one loading winch and one pendant winch per d e rrick and 3 brail winches, 2 o u te r and one inner brail, which meant a total o f 7. W ith the aid o f an e xtra stick, the d e rrick could be swung and/or raised fig. 5 The 'Merwelloyd' 20 k n o t ships A fte r this period, ships w e re developed which had speeds o f approx. 20 knots. Shape Especially the shape o f the stern started to SenW 57STE [A A R G Ä N G N R 2 99 fig. 6 Hold-plan 'W -ke rk' o r dropped. The direction, in which the stick was moved corresponded to th a t o f the derrick. If the d e rrick was raised, the brails w ere eased, during which process they remained taut due to certain amount of prestressing. If the d e rrick was swung, one brail was shortened w hile the o th e r slackened. S to w a g e o f th e ca rg o A pp ro xim ately the tim e that these types o f ships w ere taken in to service, stowage methods w e re also undergoing rapid change. C ertain cargos w ere stropped in advance, others palletized, in short, cargos now tended to be mainly processed in units. These units w ere driven to th e ir pla ces on board using fo rk lift trucks. This was the procedure on all vessels in service at the tim e, even in the holds constructed w ith three hatches, because these units could n o t be handled manually. The stanchions w ere also im proved due to the application o f aluminium, H -profile supports and telescopic supports which w e re clamped betw een decks. C -hooks w e re ofte n used fo r picking up pallets. These had spoons which w e re inserted in to the pallets, which made it possible to w o rk very fast. A t the same tim e, this new procedure meant th a t far less dunnage w o o d was needed, Fixed lighting in the hold had already become standard by that tim e, w hich saved both tim e and m ainte nance. A few ships w e re also equipped w ith doors built into the side o f the ship, such as, fo r example, T rid e n t Am sterdam - KNSM. These doors offered the possibi lity o f loading cargo d ire ctly per tru c k fro m the w harf via an adjustible platform by means o f a second fo rk lift tru c k on sho re, into the to p tweendeck. The d o o r was installed in a pier betw een the hatches o f tw o holds. D o ors that closed o ff the upper deck w ere another possibility, how ever these could n o t be used if the upper tw een deck was lo w e r than the quay (deep draught and/or lo w w ater). D e ck e q u ip m e n t In o rd e r to save tim e, and to speed up the round trip , much a tte n tio n was devoted to the m ooring equipment. O fte n m ooring was carried o u t w ith a com bination o f steel cable and polypropylene hawsers. The steel cables w ere w ound on m ooring w in ches. There was no longer any need fo r the tim e-consum ing and complicated process o f stopping and belaying on bollards. The hawsers, made o f synthetic material, w ere hauled in using a warping pin o r capstan. The hawser disappeared d ire ctly behind the sailor entrusted w ith this task, in a hatch in a hawser locke r below deck. A ll these added features made the ships 100 fast, both at sea and in p o rt, and it became im p o rta n t to organise the ’shore’ in such a way th a t w aiting times w e re restricted to a minimum. These had also become very expensive which made operating efficiency vital. T o reduce c re w costs, a large am ount o f the manual w o rk on deck and in the engine ro o m was curtailed. C rew s w e re reduced, as early as this, fro m 55 to approx. 35 p e r sons. The ships no longer carried any pas senger, which made a slight difference in the numbers em ployed in the catering de partm ent. In the hatches and the loading gear, there w e re hundreds o f bearings and hinges. T o save w o rk , these w e re con structed in such a way that no greasing was required. N o t all the shipowners had had ’open’ ves sels b u ilt (H A L - G. DIJK Class). Despite the size o f the openings, a considerable am ount o f space remained below deck w hich had to be stow ed w ith a fo rk lift tru c k because pallets, etc. coufd n o t be moved manually. Many o f the systems in the engine room had already been com puterised, in order to reduce w aiting tim es and the number of cre w needed. O perating fro m the bridge was introduced and was soon widespread. Loading and unloading the vessels took very little tim e. This was often carried out much faster than on shore, w ith the conse quence that it was n o t possible fo r the en tire package o f expensive measures which had been installed to always be fully uti lized. T o o often, the hook could be seen w aiting patiently above the quay. Many ye ars later, the firs t outlines o f the cellular container ships appeared. As a result, these m odern freighters w e re pushed o u t of th e ir original service and an a tte m p t was made to make them profitable in other areas o f shipping. Provided the vessels w e re technically in good shape - engines, hatches, loading gear - the m ore suitable they w ere, o r could be made, fo r carrying the new containers, and hence the longer they w e re retained. U nfortunately, the shipowning companies paid far to little at SenW 57STE IA A R G A N G NR 2 R o tte rd a m 1990 fig. 7 Plan o f Ai. S. ’Grebbedljk’ tention to ’container minded’ ship design. The c o n ta in e r ship The present concept o f the container o ri ginated in the USA. A fte r the system had been applied there, mainly using converted ships, it was subsequently introduced in the shipping area betw een the USA and the European continent. The firs t fully cel lular container ships ordered by a Euro pean shipowning company - the so-called first generation - w e re fo r H A P A G -Lloyd, and o f the Elbe- and W eserexpress class. The ships w e re fit up fo r 20' and 40' con tainers in accordance w ith ISO standards. One American shipow ner had already introduced a 35' container as standard, but this size was to disappear in the course of time. The design o f these vessels has been called, among oth ers things, a leap into cold w ater. T here w e re no precedents, and the construction tim e was only 15 months! S tre ng th There is n o t much available fo r the axial strength in a container ship - 80 to 8 5% is ’open’. Moreover, the transverse piers betw een the hatches are n arrow and c o n trib u te very little to the torsional stiffness. This stiffness is obtained almost e n tire ly fro m the closed parts o f the ship - fo re body, deck at the site o f the engine room and quarter deck. The torsion is mainly due to the waves which h it the ship on a diagonal, distorting the fore and aft body. High grade steel is used fo r the upper ’b o x ’ con struction w hile enorm ous concentrations o f tension occur at the corners o f the hatchways. N e w , unknown problems loomed which urgently required solving. Even in the open fre ig h t carriers, des cribed above, to rsio n was hardly a p ro b lem as the ’piers’ bu ilt crossways betw een the hatches (approx. 6 m eters long) w e re sufficiently rigid as to prevent, alm ost en tirely, any m ovem ent on the p o rt side in relation to the starboard side. Since that time, a great deal o f pioneering w o rk has SenW 57STE IA A R G A N G NR 2 been carried o u t in o rd e r to increase the understanding o f this material and to deve lop the necessary calculation procedures. H ow ever, before any welfounded conclu sions could be drawn, the firs t container ships had already been built. In retrospect, these vessels w e re very w ell designed, as they w ere able to be considerably e xte n ded later. These firs t generation vessels w e re rapidly fo llo w e d by the so-called second genera tio n , which vessels w e re taken in to service as early as 1968. Thes w e re th e single screw tu rb in e ships o f the O C L, the Encounterbay class. Service: Australia - Eu rope. Key specifications: L x B x H = approx. 2 I3 x 30.3 x 16.50 m. Power/speed: approx. 32000 S HP/2I.5 knots at 140 rev/min. The frame shape was still conventional, but could be im proved as far as reducing the amount o f vibration w ent. Many container ships o f this capacity/speed class had expe rienced problems w ith this. From this view point, the oil crisis o f 1973, during which fuel prices soared and as a result o f which many ships reduced th e ir speed by a fe w knots, turned o u t to be a blessing in disguise, n o t in the least fo r the crew . The modern propeller, w ith its sickle shaped blades which passes the strongly ir regular velocity field far m ore gradually, also im p o rta n tly c o n trib u te d to the de crease in damage and discom fort. The number o f revolutions is relatively high, which is a disadvantage. The ship has a m oderately w ide stern. As no containers had been planned on the q u a rte r deck, this fits w ell in to the design as a w hole. The fo re body is characterised by a ve ry pronounced flair, which, by means o f a curved line, becomes a steeply angled hull at the p o in t o f the long fo re castle. The aim is to p ro te c t the deck con tainers ar far as possible fro m ’green’ (mas sive) w ater. The engine room was placed as far aft as possible, as this yielded the greatest am ount o f container space. A n o th e r reason was to avoid having to raise the shore container cranes when passing the accommodation. H ow ever, this w ill certainly have increased the am ount o f vi bration and noise in the engine room and deck house. The cooling system fo r the refrigerated containers was also very sophisticated fo r its tim e. O ne co o le r was installed per stack (o f six containers), w hich circulated the cold air through the containers. A u to m a tic couplings, w hich w ere springloaded and pneumatically operated, con nected tl?e container and the air duct by means o f inflatable bellows. The num ber o f refrigerated containers was over 300 (40% o f the capacity below deck). The sys tem was applied later on o th e r lines, and also fo r 40' containers. The great advan tage o f this system was the fact that the containers did not each have th e ir ow n cooling unit w ith all the accompanying maintenance and flo w problems. The disadvantages w ere, and are: 1) In w arm er regions, carriage on land make a re frig e ra tio n system necessary in terminals and trucks fo r long distances. 2) Due to the lack o f standardization o f containers w ith heights o f 8 ' and heights o f 8 '6 ’’, the interchangeability o f ships and containers tends to be poor. W ith a view to technical im provements, the system in w hich each container is equipped w ith a separate re frigeration unit, a system w hich is far m ore flexible, w ill be increasingly applied. This w ill also allow a b e tte r d istribution o f the invest m ent costs (ships, containers). The total capacity in 20' containers, 774 below deck and 526 on deck was later con siderably expanded by the application o f a 4th layer, which soon became general, and on p o rt and starboard a ro w on deck above the gangways. A ll beginnings are d if ficult, and the engineers and entrepeneurs w h o introduced this ship deserve o u r full respect. The firs t D utch container ship (o f this class) was the A bel Tasman, which sadly enough, was scrapped in 1986, fo r reasons o th e r than technical ones. The ship was deI0 I BEZEMER DORDRECHT b v . SALES • RENTALS • SERVICE • ENGINEERING WORLD’S LARGEST FLEET OF WINCHES IN STOCK CAPACITY 100 kgs - 400 tons AMCON CLYDE SKAGIT SMATCO ATLAS COPCO ■ A n k e r K e r e n " ^ ^ |S S le r e n slieren • Sleep B aggerlieren " |§ v o o T d e Binneiw aart, ■ G r o t e - e a W e .n e V ls s e r li. Ridderinkhof b.v. (0MCQ) 2021. M u (O62Oa)3302. M n 42341 rhni 3 0 3 3 liliC 3 3 EPAR 3V SOLE REPRESENTATIVE IN EUROPE FOR CONMACO, U.S.A.-AMCLYDE WINCHES SPARE PARTS AVAILABLE FROM STOCK LINEAR WINCHES UP TO 700 TONS 24-HOUR SERVICE, REPAIR AND ENGINEERING P.O. Box 154 3300 AD D ordrecht HOLLAND TEL. (78)-136066 TLX. 29295 FAX (78J-136391 EQUIPMENT LIST AVAILABLE ON REQUEST s p e c i a l is t s IN a ls o on EXHAUST/INLET VALVES/SEATS EXCHANGE BASIS but also for: Pistons. Cylinder covers etc. Marine Diesel Engine Repairs, on board ships and in our own workshop. Maintenance W ork to Marine and Onshore Plants Special Equipment for mobile boring work. Bos Smit’s Repair B.V. 131 Sluisjesdijk, 3087 AG Rotterdam Phone 010-428 12 22 Telefax 010-495 02 76 H a rb o u r n u m b e r: 2127 A102 R o tte rd a m 1990 signed by Blohmen Voss and was a sister ship to the Sidney Express. This vessel was 11 meters longer ye t the space available was not utilized w ith maximum efficiency. The num ber o f bays was no larger than found on the O C L ships. There was, m o re over, space fo r only 100 re frigeration con tainers, which required even less length. To avoid the risk o f vibration, the deck house had been placed I -40’ bay forwards. The vessel was d ire ctly equipped fo r 12 broad and 4 high deck containers. The lashing system fo r the fo u r layers o f deck containers was extrem e ly reliable and sound, but consisted o f a maze o f rods and tightening screws, which demanded much time and attention. Later, experience showed that this could be substantially re duced w ith o u t problem . The th ird g e n e ra tio n Once again, it was the English w h o set the pace. English ships w e re bu ilt fo r the Euro pe - Eastern Asia service. The English ships (Liverpool bay class) w e re o rd ered in May 1969. The main dimensions w e re chosen as to be able to just barely navigate the Pana ma Canal. They w e re tw in-screw ed ships, driven by 2 X 40,000 SHP steam turbines, good fo r a safe service speed o f 26 knots. The choice was determ ined by the desire fo r operational reliability and less m ainte nance. N edlloyd, to o , p u t 2 such ships into service, both o f which had been designed by their ow n architectural agency (N e d lloyd D class). The vital statistics o f these ships were: Main dimension: L X B x H = 287 x 32.24 X 25 m Capacity in TEU below deck/ deck = 2020/930. Shape In the fo re body a large flair is constructed above the w ater, in o rd e r to p ro te c t the deck containers against green w a te r (com parable to the Encounter Bay Class). The bulb was designed to have the greatest ef fe ct at high speeds. In the after body, the fram e shape is rather flat, which fits w ith the ra th e r flat, broad stern. A closed skeg was installed, w hich is connected to an (6 m e te r long) unbalanced rudder. The shaft ing, 6 m fro m the centerline, runs parallel and slope. In the engine ro o m as lo w as possible - taking the gear case as represen ta tive - and at the screw also as lo w as pos sible. The shaft tunnels w e re composed o f sm ooth, circular pipes w ith a minimum diam eter ( 1750) and supported at the back by tw o p ro p e lle r struts - the narrow est possible. Conventional shell bossing, G rim m W heels and shafts w ith o u t casing w e re also considered. The narrow est o b stacles are the best fro m a hydrodynamical po in t o f view. H ow ever, shafts w ith o u t casing tend to develop considerable ‘bumps' at the couplings and the in te rm e diate struts, w hile adjustment in the case o f unforeseen shaft vibrations and adjust ments in shaft length are practically ruled out. The struts produce fe w disto rtio n s in the wakefield. O f course they have been placed as precisely as possible in the d ire c tio n o f the flow. These ships are subject to virtually no v i bration and this shell bossing construction has been successfully applied by many. The unbalanced ru dder has a rudder deflection o f 45° at m oderate speeds and combined w ith the closed skeg, has good manoeu vring characteristics. The steering gear has a maximum m om ent o f I 100 m tons! In a follow ing design - m o to r vessel N edlloyd H-class - it became evident th a t the resis tance o f the shaft bossing is less w ith h o ri zontal shafts; the angle betw een the shaft bosssing and the upward flow ing w a te r w ith the flat a fte r body o f the ship is smal ler. In the D-class, the fear o f vibration was so great th a t the screws - diam. 6.350 at I 35 rev/min. w e re m ounted as lo w as pos sible. U p to this tim e, six high containers had al ways been loaded in to the holds. The c o r ner struts w e re built, as regards strength, based on this, and taking a vertical acceler ation o f I g. ( 10 m/sec2) in to account. The th ird generation o f ships how ever, fea tures tw o layers in the hull. For this reason, the design provided fo r so-called ’bed steads', which w ere interm ediate supports which passed the load o f the upper layers o n to the ship’s actual structure. Accelera tio n tests have shown th a t these - from an operational po in t o f view, absurdities could be le ft off, as these long ships proved to have a far smaller acceleration. Three container layers w e re able to be placed on deck. This was the maximum fo r many cranes - and a to ta l o f 12 layers. This depth was also chosen to simplify the lash ing system o f the deck containers, taking the experience gained w ith the ship o f the second generaton. For the sake o f stability, the containers must n o t weigh to o much. M oreover, at a GM o f 0.3 - 0.5 m. the peri od o f oscillation o f these ships is 20-25 sec onds, which is very good fo r the forces o c curring in the lashing systems. In these ships, just as in the second genera tio n vessels, 4 m ooring winches have been installed b oth fo re and aft. The holding force is adjustable. Depending on wind force and dire ctio n and sometimes c u r rent, this can be adjusted and centrally m o n ito re d to save w o rk . The vessels are equipped w ith a gangway ladder w hich can fig. 8 The first OCL-containership SenW 57STE IA A R G A N G N R 2 I03 fig. 9 The 'Abel Tasman' be swung o u t and has been constructed as a bridge, a handy feature w ith such a depth. This ladder can be le t dow n fast to allow customs officers, pilots and o th e r com pul sory visitors on board to ensure th a t m at ters are dealt w ith sm oothly and w ith o u t hitches in p o rt. Following the oil crisis in 1973, the service speed o f the vessels was reduced to - 22.5 knots and the ships w e re converted to m o to r vessels w ith 48.000 SHP at 112 revs/min. The bulb, to o , was adjusted. A few ships o f this class w e re b u ilt d ire ctly as m o to r vessels. Typical examples are the Scandinavian 3-screwed models, construc ted at a tim e when the capacity required could n o t be furnished by tw o engines. Some years later, w hen this had become possible, various tw in-screw ed vessels w ere built in Japan as m o to r ships. This was the largest class o f ship th ro u g h o u t a p e ri od o f I 5 years ( 1972 - 1987). In capacity they w e re surpassed only, by the ships o f the U.S. line - Panama canal dimensions, service speed 17 knots - b uilt in South K o rea. These ships w e re b uilt to carry only 4 0 ’ containers. be required to stabilize the vessel. The APL w e n t even fu rth e r fo r reasons o f economy. In the case o f only partial load ing, this w ill almost certainly lead to ships w ith a stiffness comparable to th a t o f the 32.30 m etre vessels, w hich are able to car ry I I layers in total. N e w D e v e lo p m e n ts In the future, the almost magical breadth o f the Panama Canal w ill n o t fo rm the re s tric tio n it does today fo r container ships. T o realize a g ro w th in trade, vessels w ith a gre a te r capacity w ill be increasingly de manded by the tru n k lines, especially as loading and unloading tim e can no longer be shortened by the use o f ever faster cranes and s w ifte r carrying on and o ff pro cedures at the term inal itself. The present types o f ship w ith container cells in the hull, hatches and deck contain ers placed on fittings and lashes are cer tainly n o t the ultim ate in efficiency for especially large ships w ith a great deal of freeboard, as: a) A ll fittings - 2500 fo r a th ird generation ship - must be m ounted and removed again. b) deck container w o rk is slowly disap pearing (to o dangerous) and fittings must be fastened fro m a cage attached to crane spreader. c) in ships w ith 4 cargo layers, the bottom layer must also be lashed - rods + tighte n ing screws o r o th e r comparable method. A ll this costs tim e, money and mainte nance. d) the hatches have to be opened/shut, and e) last but n o t least, containers and hatches have to be shifted, which is expensive! Hence the high decked ships, which have very little problem s w ith o ve rflow ing wa te r, are b u ilt w ith o u t hatches and the con tainer spaces are raised to the to p layer, w ith the exception o f th e forem ost hatch N o n P a na m a vessels A fte r 1987, the Am erican President Line, to o put a num ber o f 38 m wide, single screwed ships into service w ith speeds o f 23 knots. It should be noted that the Pana ma Canal beam p e rm itte d ( 1 0 6 '= 32.3 m.) is actually to o small fo r 12 layers o f containers. By placing the heaviest con tainers at th e b o tto m and filling the double b o tto m com partm ents w ith w a te r ballast, a useable w eight o f the deck containers can be achieved. M oreover, as a rule, em pty containers also have to be carried. These should preferably be placed in the highest layer. The best sea ship fo r 12 layers (be lo w and on deck) w ould be 35 m etres w ide. W a te r ballast w ould then no longer fig. 10 The 'Nedlloyd Delft', Bossing and strut 104 SenW 57STE jA A R G A N G N R 2 R o tte rd a m 1990 es, as a result o f which the disadvantages listed above w ill be practically all taken care of, although the maintenance w ill be somewhat increased, and w ind resistance slighty higher. From 1973 up to the present a great many cellular container ships o f all shapes and sizes w e re taken in to service. Enormous tw inscrew ed vessels w e re built up to 1980 w ith service speeds o f 23 knots. A fte r that time, the required p o w e r was able to be provided by a diesel engine. Some o f the vessels w e re equipped w ith 36-40 ton cranes in o rd e r to be able to unload and load themselves in certain ports. O fte n a 20'-4 0' telescope spreader was applied. For some services, w ere swells w e re apt to occur in the harbour basin, even m obile gantry cranes w e re used to sufficiently re strict the fo re and aft lurching o f the con tainers. Besides frozen cargo, all o th e r kinds o f chilled cargo was carried by con tainer, including many types o f fru it. This sometimes required a considerable amount o f ventilating to keep the C 0 2 and ethylene co n te n t at the levels desired d u r ing the ripening process. As a rule, such ships are able to carry a large num ber o f containers {b u t n o t in cells) and have th e ir ow n loading gear (25 40) to n cranes w ith a large spread. They usually feature broad, double hatches, which are long enough to hold th re e 20' containers. H o w eve r, they also need deck room fo r so-called break bulk cargo and are generally constructed w ith one deck, o r sometimes 2. These ships can vary greatly, fro m small fender ships to quite large ships o f up to 170 m ( 100 TEU - 1400 TEU), w ith speeds o f betw een 14 and 17 knots. Some o f the ships are equipped w ith derricks, but a fe w 3 6 -4 0 to n cranes o r double cranes (2-25 tons) are far m ore suited fo r container handling. In the smaller-sized ships, the cranes w ere often placed com pletely to one side, as to form no obstacle in the holds and to be as accessible as possible fo r the shore con tainer bridges. The smaller ships w e re o f ten ve ry lo w in o rd e r to keep the tonnage under a certain value in connection w ith the num ber o f cre w required. The strength and w atertightness o f the hatches are e xtre m e ly im p o rta n t in such a case, as these could come under w a te r on the low side at a ro lling angle o f 25°. O ften, the deck is already in the w a te r w ith a list o f 20°, after w hich th e stabilizing righting arm rapidly drops away and the e x te n t o f stabil ity becomes marginal. The relationship be tw een tonnage and c re w is w ro n g in such a case, and leads to the design o f dangerous ships. R oll-on R o ll-o ff ships This type o f ship originated in Sweden and was initially meant to enable alle cargo to SenW 57STE [Ä A R G A N G N R 2 be driven o n /o ff board. In the large ships, this takes place via a broad q u a rte r hull ly ing on the quay at an angle o f 35-40 de grees to the centre line o f the vessel. N o loading gear is required on the quay, as the vessels use th e ir ow n trucks. In the m ore recent types, the hull is 12 m w ide increas ing to 25 m at the stern. Fixed ramps then give access to 3 levels, each w ith an open e n try w id th o f 9 m, which can accom m o date 3 trailers. So that the main engine could be placed as far as possible in the af te r body, th e ramp is at the m iddle o f the th re e entrances. The height o f the decks is determ ined based on the use o f the ship. For heavy car go which demands less height, 3 100 mm fro m the tank to p up is reasonable. For tra ile r decks, 4400 mm is a good height. A t least one deck (and sometimes tw o ) is suit able fo r tw o layers o f containers, fo r which 6350 mm fre e height is required. This height is also e xtre m e ly suited fo r heavy cargo o f all kinds. The freeboard deck is used to bridge the slightest differences in height. A sufficient num ber o f lashing eyes and container fittings have been m ounted on all decks so that every kind o f cargo can be well-lashed. T o prevent the exhaust gasses fro m the diesel trucks fro m accumulating in the decks, an exceedingly strong ventilation system is installed, usually in the sides o f the ship. Some ships have been partially equipped w ith decks which are able to be lifted up fo r cars. As a rule, a large number o f electrical connections fo r refrigerating containers are also provided. Containers which can be arranged aft and fo re as w ell as athwartships, are preferably stow ed on the to p deck. If use is to be made o f a con tainer, they must have been arranged lon gitudinally. Shape o f ship T o give the entrance at the stern max imum breadth, an e xtre m e ly flat frame shape is required at th a t point. Also, the steering gear must be installed under the boarding deck, in as little space as possible. The propeller, which should preferably n o t be re stricte d in diam eter and the clearance to the shell above it, are under slight pressure as the height o f the threshold is n o t unlim ited. A lightly laden ship, high w a te r and hence a lo w quay w ould make the ramp to o steep to drive on. This makes it very com plicated to con stru ct a good ship w ith little vibration. W a te r tig h t la y o u t Ro-Ro ships require large free decks to realize o p tim u m stowage and manageabili ty possibilities fo r the cargo. It is th e re fo re desirable to keep the space under the freeboard deck, betw een the fo rw a rd engineroom bulkhead and fo re peak, com pletely open, hence no w a te rtig h t bulk heads. A side collision, in w hich the damage is deeper than the w id th o f the side tank, is th e re fo re fatal and the vessel could sink very fast. The Scandinavian vessels are o f ten equipped w ith a revolving w a te rtig h t bulkhead composed o f tw o sections in the holds under the freeboard deck, which makes the situation slightly less dangerous. If a collision should take place at the freeboard deck, this w il generally cause a list in this d irection - side tanks which have filled up - and in the case o f load draft, w a te r w ill gather on the freeboard deck. This decreases the stability due to the high centre o f gravity o f the w ater. If the damage is slight, d ro p chutes can be used fo r draining the w a te r o ff to the tanktop, how ever, clearly this is n o t the solu tio n in the case o f substantial damage. N o legal requirem ents have, as yet, been set up as regards a w a te rtig h t lay-out fo r freighters. It should be clear that all im provem ents are made at the cost o f the economic efficiency o f this type o f ship. The alternative co n tru ctio n fo r Ro-Ro pas senger ships w ith the B 5 longitudinal bulk heads under the free board deck w ould have a disastrous effect on the econonomic efficiency o f these ships. As far as I know , up to the present no enorm ous disasters have occurred w ith any large Ro-Ro ships and they are almost certainly safer than tankers. As the reader is no doubt aware, there are many smaller Ro-Ro ships fo r w est European and M editerranean sea ser vices, which cannot all be dealt w ith here. If they also carry passengers, then the stiffer requirem ents applying to passenger ves sels w ill hold. These have, rightly, become far m ore stringent th ro u g h o u t the years. In general, the Ro-Ro vessels are especially suited fo r s h o rte r distances because o f th e ir fle xib ility. For longer distances, cellu lar containers are m ore economical. T y p e o f ca rg o In o rd e r to function well, sufficient driven cargo is necessary. If this should be lacking, fo r example because it fails to sell, such as happened in the M iddle East, then the econom ic advantages o f the vessel become threatened. Some vessels have been em ployed to back up a container service. This can tu rn o u t to be a good arrangement. If to o much o f the cargo should consist o f containers, making it necessary to place an excessive number o f these in the hull, load ing and unloading w ill become to o expen sive and uneconomical in operation. The e ve r-g ro w in g tendency tow ards containerization reduces the need fo r these vessels. It w ould seem th a t th e ir prim e is past. B u lk c a rrie rs The w e ll-kn o w n tra m p e r dating fro m be 105 fig. 11 M ulti purpose bulk-carrier 'Moordrecht' fo re the war, w ith one tw eendeck and bal last tanks in hold 3, suitable fo r carrying grain and o th e r bulk cargo, has gradually disappeared since the in tro d u ctio n o f the self trim m ing bulk carrie r ( 19 6 0 -1962). In addition to the norm al w o rk w hich in volved opening and closing the hatches, in the case o f changing cargos, such as fo r e x ample grain/w ood, it was necessary to continually break dow n and build up the scaffolding o f the feeders. The first bulk carriers had a carrying capac ity o f 15,000 tons. This capacity also e x panded rapidly. Today’s grain ships carry up to 60,000 tons and are usually Panamax vessels. Bulk carriers fo r ore, coal etc. are often much larger; 150,000 tons is n o t e x ceptional. The smaller ships o f up to 40,000 tons often carry th e ir ow n loading gear ( I crane o f 25 tons per hold). The num ber o f holds tends to be uneven: 5, 7 o r 9. The unevenly numbered holds are usually s h o rte r than those w ith even numbers. W hen heavy o re is being carried, only these sho rte r holds are filled. The sta b ility and especially the oscillation period is much b e tte r than if all the holds w e re to be filled. Unloading, to o , goes faster, w ith less cleaning and trim m ing w o rk . The speed o f the bulk carriers is a very stable 14-15 knots. The to p side tanks are sometimes used fo r light grain. They are also equipped w ith small trapdoors in the to p deck and chute traps in the b o tto m . The n a rro w b o tto m , w ith a w id th o f a m eter, should be free o f all structural members, so that the bo tto m s can be easily sw e p t clean. This 106 type is optim ally unloaded using grabs. In addition to this firs t original type, the socalled open bulk c a rrie r was later also de veloped. These ships are com pletely dou ble-walled, w ith e xtre m e ly broad hatches. They are less suited fo r unloading w ith grabs because all the walls are vertical and hence the surface area o f the b o tto m is very large and n o t self-trim m ing. They should also n o t be used to carry very heavy ore, as they are then to o stiff. H ow ever, they are e xtre m e ly suited fo r many types o f special cargos, fo r example long, th in shaped cargos such as pipes o r w ood. The hatches o f regular bulk carriers are to o sh o rt fo r these. M oreover, the hatch length and w id th are many tim es larger than the size o f the containers often car ried by these ships, sometimes even on a line service basis. This type can have a carrying capacity o f up to 45,000 tons. They are norm ally equipped w ith cranes o f 40 tons, one per hold. They are obviously n o t ideal fo r car rying containers. They have no cells and the w e ig h t o f the containers on the hatch es is lim ited by the stability. They are ’fu ll’ ships, w ith a relatively small w aterline sur face - sheer rib fram e and n a rro w stern. As a result, the m etacenter height is much smaller than in th e m ore strongly built container ships, w h e re m oreover, a high m etacenter is aimed at by the application o f V -ribs and a broad stern. T a n k e rs H ere, to o , enorm ous changes have taken place since 1945. The m ajority o f prewar tankers had carrying capacities o f between 9000-12000 tons. Tanker sizes soon in creased and this type o f vessel began to be re ferred to in superlatives, i.e. mammoth tankers, V C C L ’s (very large crude car riers) and U C C L ’s (u ltra large crude car riers). The Tina Onassis, taken in to service in 1953, had a carrying capacity o f 45,000 tons, and by 1966/67 capacities had already climed to 200,000 tons. Since 1970, (to o ) many 330,000 to n tank ers w e re built, w ith some even reaching 550,000 tons. Som ewhere around 1964, the practice of building the deck house amidships was dropped and it became custom ary fo r the e n tire accomm odation to be placed on the aft part o f the vessel. The num ber o f cargo tanks was drastically reduced. This g ro w th was so explosive w ith in such a short time that the experience was lacking to be able to im mediately adapt the various stru ctu r al parts. It did become possible, however, to calculate the many constructions by com puter. This included problems w ith the under standing o f the load to which certain struc tures are exposed. Thus in the larger ships, th e re w e re great difficulties in the struc tu re o f the b o tto m , fo r example w ith the transverse webs in the middle tanks, due to the fact that the side tanks w e re asym m etrically empty. The cross bulkheads in the long middle tanks w e re subject to ex tra loads due to the longitudinal move m e n t o f the liquid cargo in tanks which had SenW 57STE jA A R G A N G NR 2 R o tte rd a m 1990 not been com pletely filled, w hile damage to the shell occurred betw een the loaded draught and the upper deck as a result o f changing wave loads. The jo in t along the web frame w ould sta rt to rip, which some times w ould progress to the w eb and even lead to cracks in the skin. Furthermore, adaptions w e re also re quired on the part o f the yards building the new tankers. These yards had to undergo a thorough reorganization due to the sheer size o f the tankers, which made it neces sary e.g. to ensure there was tra n p o rta tio n to the ship and that the b o tto m o f the to p deck was accessible, all m atters which proved to be e xtre m e ly expensive if not provided fo r on tim e. Many shipyards w e re swamped w ith grave financial difficulties because o f a failure to recognize these new developm ents on time. The consequences o f a leaking tank er, as a result o f stranding o r explosion, are only to o familiar. These hazards have re sulted in international regulations which strongly re strict vessel dimensions. H o w ever, it is still p e rm itte d to use cargo tanks for w ater ballast, and a double b o tto m is mandatory only fo r chemical tankers. The regulations regarding oil pollution, in e rt gas installations, fire safety, minimum draught and maximum trim , and steering | fig. I 2M. S. ’Norsun’ engine co n tro l etc. have become much stric te r. In addition to crude oil tankers, th e re are also tankers w hich carry p ro d ucts and shemicals. As the cargo o f the ships m entioned above becomes succes sively m ore dangerous, the legal regula tions regarding these ships also become s tric te r and s tricte r. Passenger lin e rs The existing services w ere resumed as soon as possible after the w ar w ith the ships which had survived. H ow ever, no new ships w ere b uilt fo r the line to In donesia. O n ly the H A L commissioned the construction o f tw o new ships, namely the Statendam and the R otterdam . These w e re later rem oved fro m the N o rth Am erican line to become cruise liners (1970). The cruise operations w e re suc cessfully run by the H A L w ith another th re e new ships and a number o f con verted vessels. U nfortunately, it has now passed in to o th e r (Am erican) hands. The Stoomvaartmaatschappij Zeeland op erated a num ber o f ferries, the latest o f w hich w e re b uilt as ro -ro ships, fo r carry ing cars and a lim ited num ber o f trailers. The company has since become part o f the Stena Line. N oordzee Veerdiensten, which was founded in 1966 in Am sterdam , jo in tly operates a num ber o f services betw een E u ro p o o rt - Hull and Zeebrugge - Hull fo r passengers and trailers/personal cars w ith the English shipping company P & O. The m ost recent arrival is the Norsun, whose co u n te rp a rt is the Norsea. T o gether they maintain a daily service be tw een E u ro p o o rt - Hull. They are able to accommodate 1250 passengers and 950 automobiles, o r 280 cars and 120 fo rty fo o t trailers. The carrying capacity is 6300 tons, an im p o rta n t figure fo r the shipow ners in view o f the e ver-grow ing tra ile r w eight. The main dimensions o f the vessels are all a t the maximum in connection w ith the swinging space in E u ro p o o rt and Hull, the lock w id th in H ull and the depth o f the N o rth Sea at the site o f the banks lying in the navigation route. T here are, o f course, many o th e r types o f ships, m ost o f which are m o re o r less specialized types. H ow ever, the scope o f this article does n o t allow ro o m fo r even a cursory lo o k at the m ost significant o f these. F ^finiim « "1 B u rn SenW57STE jA A R G A N G N R 2 m u' 107 THE NETHERLANDS SHIPBUILDING INDUSTRY By G. De Vries Lentsch managing director o f the NETHERLANDS’ SHIPBUILDING INDUSTRY ASSOCIATION (VNSI) P re face W hat is the importance o f the shipbuilding and shiprepairing activities in the Rotterdam area for the functioning o f Rotterdam as one o f the world’s most important harbours. This is in the question which is worth contemplating in the framework o f this special issue o f ’Schip en W erf. T h e R o tte rd a m h a rb o u r, som e d a ta The position o f the R otterdam harbour can be charactarized by the fo llo w in g table in which the contributions o f the diffe re n t tra n sp o rt functions in the transhipm ent fi gures are given fo r 1987: by tra n sp o rt by sea. Taking also account that the num ber o f sea-going vessels e nte ring the R otterdam harbour amounts to abt. 32.000 a year, it is clear th a t an ade quate shiprepair and service capacity is an integral p a rt o f the R otterdam harbour infra-structure. Table I. Transhipm ent figures o f R otterdam harbour (1987) (n e tt w eight in tons x 1.000) in (source CBS) by by by by by sea rive r rail road pipe total out to ta l 193.812 10.483 1.056 5.840 87 50.816 74.720 3.178 8.832 36.829 244.628 85.203 4.234 14.672 36.916 211.278 174.375 385.653 This table shows that tra n sp o rt by w ater, w ith a share o f 85% , is by far the m ost im p o rta n t function in the tra n s p o rt and dis trib u tio n pattern, som ething which w ill n o t come as a surprise. The m ost im p o rta n t share (63% ) is taken This table shows another im p o rta n t sector fo r the shipbuilding and in particular shiprepairing companies: the inland w aterw ay tra n sp o rt w ith its many vessels, taking a share o f 22%. In addition to the above mentioned num ber o f seagoing ships entering the R o tte r dam harbour, abt. 175.000 inland w a te r way vessels are going in and o u t in a year. Also fo r these vessels repair and service facilities are needed in th e area. M ain y a rd s in and a ro u n d R o tte rd a m In o rd e r to be able to fu rth e r investigate the question which this article wants to answer, it is interesting to s ta rt w ith a look at all m ore o r less im p o rtan t yards located in and around the R otterdam harbour. The fo llo w in g map o f the R otterdam har bour area and corresponding table o f yards gives a global insight in the conglomerate o f yards located in the area, active in the building o f sea-going vessels, inland w a te r way vessels and o th e r service cra ft and/or in the repair o f those vessels and off-shore material. The table 2 gives an indication of the activities o f the yards as w ell as o f their main facilities. Map I . The yards in and around th e Rot terdam harbour. This table shows th a t many yards have sur vived the recent long and deep crises, most o f them w ith a considerably reduced capa- H oe k va n H o lla n d Europoort Rat terdam H a rd in x v e ld S lie d r e c h t D o rd re c h t 708 SenW 57STE |A A R G A N G ~N R 1 R o tte rd a m '1990 Table 2. Yard names, activities and facilities activities IW SO no. yard I 2 3 4 5 6 7 8 9 I0 II I2 13 I4 I5 I6 I7 I8 I9 20 2I 22 23 24 25 26 27 28 29 30 3I 32 33 34 35 36 37 V erolm e B otlek Vlaardingen O o st W ilton-F ijenoo rd De H oop Schiedam Bocxe D e lft Niehuis & vd Berg RDM. H oogerwaard Van Brink Van D uijvendijk YVC Capelle Joh. v. D uivendijk V.d. Giessen-de N. YVC-Bolnes Schram Bolnes Van Grevenstein IHC Holland K ’dijk v.d. Giessen-de N . Albl. Alblas ’t Am bacht Buitendijk Gebr. Kooiman Van der Sluijs De Biesbosch Hoebee Slob Lanser Van Eijk IHC Holland Sliedr. Baars Delta Shipyard Nautechnicum De M erw ede Damen Reparatie Van Mill K. Damen Damen Shipyards SO = IW = NB = RP = seagoing vessels and/or off-shore inland w aterw ay vessels newbuilding repair * * * * * * * * * * * * * * * * * * * * city and many w ith a m ore lim ited scope o f activities. N ext to this regrettable reduction also Table 3. Present docking capacity fo r sea going vessels and off-shore in R ot terdam harbour area Ship size (X lOOOtdw) N um ber o f docks/slipways < IO 10-40 40-70 70-200 >200 I8 9 2 3 I total 33 SenW 57STE |A A R G A N G N R 2 NB RP * * * * ★ * * * * * * * facilities SW CS * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ♦ * * * * * * * * * DD * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ♦ * * * * * * * * * * * * * * * * SW =slipw ay(s) CS = covered slipway/dock D D = d r y dock(s) positive effects can be noted; the yards that have survived are the fitte s t and the m ost com petitive having concentrated on w hat they are best in. A t present the general picture is that after many d ifficu lt and loss giving years, m ost yards are back in the black figures again. This gives the management and employees a good s p irit in th e ir e ffo rts to stabilize and possibly im prove this situation. Service, fle x ib ility and quality are the key w ords in these companies. A fte r this to ta l picture a closer look w ill be given on the sub-sector o f the yards which are m ost relevant fro m the R otterdam H arbour A u th o ritie s p o in t o f view: the shiprepairers. R ep air and m a in te n a n c e o f seagoing vessels and o ff-sh o re m a te ria l C oncentrating on the yards which are able to dock and repair the above mentioned material, leaving o u t the many so called ’w e t repair’ companies w hich are also an im p o rta n t fa cto r in the repair activities in the harbour, table 3 shows the number o f d ry docks and slipways in operation in the R otterdam area at the mom ent. In term s o f tu rn o v e r these yards represent about three quarters o f the D utch to ta l shiprepair industry. These docks/slipways are located at 9 yards, employing about 1700 people. This capacity can be used fo r the repairing o f ships visiting the R otterdam harbour, as w ell as o f ships sailing elsewhere. The repairs on ships calling in R otterdam can be divided in to emergency repairs, re pairs w ith o u t w hich in the vessel is notable o r allowed to leave the harbour to the open sea fo r safety and/or environm ental reasons (State P o rt C o n tro l o f accidents), and maintenance and/or normal surveys. In 1987 the R otterdam H arbour A u th o ri ties estimated the minimum dock facilities needed to p e rfo rm these tw o tasks fo r the ships visiting the harbour (the minimum emergency docking capacity), this was done purely fro m th e ir ow n interests as harbour operators that w ant to o ffe r all neccesary facilities to th e ir (potential) clients, as a harbour attraction. Starting w ith the minimum docking capaci ty fo r emergency repairs, an estim ation was made o f the num ber o f serious cases o f damage occuring in the R otterdam region Table 4. M inim um emergency docking capacity fo r the R otterdam harbour Source: Marine Analytics/R otterdam P o rt A u th o ritie s Ship size (X lOOOtdw) Num ber of accidents N u m ber o f docking days Num er of docks/slipways < I0 10-40 40-70 70-200 >200 26.4 6.3 3.6 3.7 0.9 528 126 72 74 I8 2 I I I I 109 Table 5. Theoretical survey/maintenance docking days o f vessels calling in the R o tte rdam harbour Ship size ( x 1000 td w ) Docking days N um ber o f ships/year p r survey N um ber o f N u m b e r of dockings/year docks/slpw < 10 10-40 40-70 70-200 >200 7.9 1 l. l 12.0 13.6 13.6 91 47 II 10 2 21,900 6,900 1.500 950 200 2 3 1 1 1 Table 6. T heoretical docking capacity fo r emergency repairs and maintenance o f ships visiting the R otterdam harbour Ship size ( x 1000 td w ) N um ber o f docking days N um ber o f docks/slipways < 10 10-40 40-70 70-200 > 200 1289 596 193 169 36 4 2 1 1 1 and the southern part o f the N o rth Sea. The num ber o f dockings resulting from these cases amounted to about 40 in a year. Calculating w ith d iffe re n t average numbers o f dock days, the conclusion was that about 6-7 docks w ould be sufficient as an emergency capacity to cope w ith acci dents, as specified in table 4. The H arbour authorities also looked at the docking capacity needed fo r the m ainte nance w o rk and Classification Society sur veys. For the last category an average docking interval o f 30 m onths was used as the basis fo r the estimate, this figure was taken from a D re w ry re p o rt. The num ber o f docking days fo r a survey varies w ith the ship size and is given in table 5. W ith these data a calculation can be made o f the chance that a ship entering the R ot terdam harbour is due fo r survey docking. Supposing that 5 0% o f these surveys w ill indeed be perform ed in the R otterdam re gion, the theoretical num ber o f resulting docking days can be calculated (see table 5). The com bination o f the m inim um e m e r gency capacity and the theoretical m ainte nance capacity is given in table 6. The conclusion o f the analysis after some fu rte r variations in the num ber o f docking days as w ell as in the docking intervals, is th a t in all d ifferent scenarios the result is always betw een 7 and 9 docks, w ith the variations in the smaller docks (< 4 0 .0 0 0 tdw ). C om paring this capacity w ith the available capacity, a considerable surplus can be no ted. This gap is filled w ith repairs o f sea going vessels n o t loading and/or unloading I 10 in the R otterdam harbour, w ith a few big conversions and w ith off-shore w o rk. F u rtherm ore the yards w ith the smaller docks and slipways also repair inland w a te rw a y vessels (see below). A fa cto r also n o t taken into account is the big variation in the w orkload, which is so characteristic fo r the repair business. This o f course means th a t the docks are n o t al ways occupied and in peak periods there is a lack o f enough available docks/slipways. In o th e r w ords there is a needed natural overcapacity. Last but n o t leats there is the elem ent o f the relation betw een docking days and corresponding num ber o f manhours. The reduction in m anpow er during the past pe riod has n o t been accompanied by a p ro portional reduction o f docking facilities. This was neccessary because the average num ber o f manhours per docking has de minished in the same period, on the one hand because o f m ore 'maintenance frie n d ly' vessels on the o th e r hand because o f a tre n d to w a rd s m ore w e tre p a ir activi ties by flying squads o f repair companies o r even by the c re w itself. Finally a fte r a num ber o f very d ifficu lt years, at the m om ent the yards have a sa tisfying occupation o f th e ir docks and a good w orkload. In fact because o f th e ir slimming dow n a lo t o f w o rk has to be sub contracted. This w ill probably continue fo r some tim e, as one o f the main problem s o f the past was the idle hours lost because o f the overcapacity o f the individual yards. This makes the yards very prudent in th e ir policy o f enlarging th e ir o w n w o rk fo rc e again. H o w e ve r the need fo r young w ell trained skilled w o rke rs w ill g ro w as the reduction process has created an ageing o f the w o rk force. R ep air and m a in te n a n c e o f inla nd w a te rw a y vessels For this kind o f w o rk about 25 yards are available in the area, o f w hich about 6 also belong to the group o f repairers o f sea going vessels. It is obvious that the relation betw een the vessels visiting R otterdam and the repair capacity is not as im p o rta n t as is the case w ith the seagoing vessels. It is much easier fo r an inland w aterw ay vessel to select a yard som ewhere else inland, if a cheaper or o therw ise m ote attractive o ffer can be ob tained fro m a yard outside the Rotterdam area: the distances are smaller and there are less emergency repairs o r cases in w hich the ship cannot be transferred to a nother place to be repaired. Still the concentration o f repair facilities in the R otterdam area is considerable w ith about 30 additional slipways and docks available. For the repair yards the EEG Regulation aiming at a structural reduction o f capacity in the European inland fleet may create ex tra w o rk . U nder this regulation it w ill pro bably be m ore attra ctive to repair and con verse an old vessel than to replace it by a new vessel fo r which e ith er old tonnage has to be scrapped o r a penalty equal to the scrapping prem ium w ill have to be paid. C on clusion The alm ost 40 yards located in the R o tte r dam harbour areas are n o t only a necessary part o f the harbour infrastructure where emergency repairs and the normal services and maintenance o f the visiting vessels can be carried out, they are also an em ployer o f people and a cre a to r o f w o rk and activi ties in the harbour. Sources: - Rotterdam P ort Statistics, '89 - Port o f Rotterdam Magazine 89/4, pages 1821: 'Scheepsbouw in en om Rotterdam her leeft’, byjolke Brolsma - various not published (internal) reports of or owned by the Port o f Rotterdam Authorities (Havenbedrijf der Gemeente Rotterdam) - various internal statistics o f the Netherlands' Shipbuilding Industry Association (VNSI), Zoe te rmeer SenW 57STE1AARG AN G N R 2 de hoop groenpol AA marine electrical engineers for electrical service you can ring the bell night and day ACTIVITIES: New-building, manufacturing and repairs. N e w -bu ild ing division: Design and execution of complete electrical-, instrumentation- and automation systems on board of all kinds of sea-going vessels and offshore units. M a n ufacturing division: Design and production of all kinds of switchboards, motor control centres, automation- and monitoring plants. R epair division: Repair maintenance, renovation, conversion and modernizing of com plete electrical-, instrumentation-, and automation plants on board of all kinds of sea-going vessels and offshoreunits. Shop repair division: Mechanical- and electrical repair facilities for switchboards, motor control centres, automation- and monitoring panels incl. electronic- and pneumatic components etc. Facilities are available for overhaul, rewinding, impregnating, balancing and testing on all kinds of motors' generators, D C and A.C. Impregnating is done by means of the modern Ayrodev' process. The company offers a 24 hr. service. Our field repair division operates world-wide. The main office is in Rotterdam and the repair shops are located in Rotterdam and Amsterdam. Branch offices and repair shops are stationed in the major Dutch ports and repair yards. De H o o p G ro e n p o l bv 3 0 8 7 AN R o tte rd a m 2 - 8 W illin g e s tra a t T e le p h o n e (+31) 1 0 /4 2 9 5 2 0 0 Telex: 2 8 2 2 0 T e le fa x: (+31) 1 0 /4 2 9 5 0 0 5 Netherlands ISES m e m b e r Nastel baar funderen op staal Vibracon® SM G rote nauw keurig heid N astelbaar Mei Vibracon* SM fundatie-elementen is hel mogelijk om pompen, tandwiel kasten, motoren en turbines tot 0.01 mm nauwkeurig op stalen funda ties op te stellen Vibracon* SM elementen vervangen de gebruikelijke stalen vullingen. Zij maken meestal het toepassen van stelhouten o( het vlakken van de topplaat overbodig. Nastellen van Vibracon» SM elementen blijft altijd mogelijk Na revisie of vervanging kan een machine altijd met dezelfde nauwkeurigheid worden herplaatst. P ara llelcorrectie De sterische Vibracon» SM elementen neutraliseren parallelafwijkingen tot een hoek van 4° tussen fundatie en machinevoet. Daardoor dragen Vibracon* SM fundatie-elementen altijd over het gehele oppervlak V erlenging leven sduur Toepassing van Vibracon* SM fundatieelementen reduceert in hoge mate micro bewegingen en dus slijtage van machines Daarmee worden storingen voorkomen en wordt de levensduur aanzienlijk verlengd V ib ra c o n " M v o o r b e to n fu n d a tie s Voor funderen op beton levert Machine Support Vibracon» M fundatieelementen met ingiet-ankers GOED GEFUNDEERD •»m alm gen SM12 SM16 SM20 SM24 12 15 20 24 K3ÏÎ A 1Amm 1» 10 M 28 8 mm 30 35 40 45 B' mm 21 26 31 34 C_ mm 10 10 10 12 D Vmm 00 m 100 120 E mm 15 10 20 24 F VIm 6 _§ 8 _• m aM cfw n*g km N « 15 25 35 b d iin «pm annaaJ fundbpout Nm «5 200 400 rn Es? kN 4« 90 140 200 8' v«r*M gd*uivoeringM aiverM ettoogMb*ideze'T SM30 SM30 SM 42 30 36 43 34 40 46 50 JM 60 30 44 49 12 12 12 140 160 IM 26 30 33 10 10 10 00 »0 120 1450 2550 4250 375 475 675 MACHINE SUPPORT B.V. Energieweg 65 2382 ND Zoelerwoude tel. 071 -417171 fax 071 -415194 telex 39373 Mach NL. A l 11 d e h o o p g ro e n p o l R o tte rd a m m a r in e e le c t r ic a l e n g in e e r s ELECTRONIC CONTROLS FOR THE THRUSTERS ON THE SWOPS VESSEL ’SEILLEAN’ I. In tro d u c tio n The activities o f De H oop G roenpol in o ff shore w o rk are n o t lim ited to c o n tra cto r's type o f engineering and installations. O ne o f the various highly specialised activities is the design and manufacture o f the elec tro n ic controls fo r 'th ru ste rs' o r active rudders. These are increasingly used on self propelled/dynam ic-positioned o ff shore installations, e ith e r w ith o r w ith o u t anchor assist systems. M ost o f these con tr o l systems are built fo r Schottel-Lips b.v. o f the Hague, the Netherlands. O ne o f the prestigious projects is the B (ritish) P (etroleum ) SWOPS ship, which stands fo r Single W e ll O il Production System. This ship is b uilt to ensure the econom ic developm ent o f marginal fields and is, in essence, a floating oil production, storage and transpo rt system, all b uilt into a tanker-like ship, capable o f maintaining station a t a well. The system is fully selfcontained and requires no additional equipm ent o r vessels to co n trib u te to the production, processing o r transportation. The main particulars o f the ship are: Length overall, 249.50 m Moulded breath, 37.00 m D epth to upper deck, 19.80 m Design draught, 11.00 m T h e T h ru s te rs An essential re quire m e n t is to remain sta tio n at the w ell and to sail under its ow n p o w e r from one site to another. For this purpose the ship is equipped w ith seven trusters. Each th ru s te r weighs o v e r 20 tonne and is pow ered by an ele ctric m o to r o f 3.000 kW . T w o azimuth thrusters are located at the stern o f the ship fo r steering, propulsion in transit and position-keeping, unassisted by rudders. A lle steering p o w e r is generated by the tw o stern thrusters. W hen main taining station at a w ell, a fu rth e r fo u r thrusters are deployed. These are located along the b o tto m line and can be retracted in to the hull in shallow w aters when n o t needed o r w hen under way fro m s ite -to site. The seventh th ru s te r is a tunnel th ru s te r in the b ow , used during station keeping in conjunction w ith the o th e r six thrusters, and fo r steering assistance in confined spaces. D uring loading operations at the well, all The SWOPS Vessel ’Seilleon’. seven thrusters can be used simultaneously and, by varying the horizontal angle o f the thrusters (the azim uth) as w e ll as the pitch o f the propellors, the ship can maintain sta tio n w ith o u t assistance. The azimuth o f each th ru s te r and the pitch o f each p ro p e llo r can be varied indepen dently. The coordination o f the required azimuths and pitches is done by a central com puter which can be overridden by manual co n tro l. 2. T h r u s te r C o n tro l T o be able to c o n tro l the p o w e r involved, each th ru s te r is equipped w ith a separate auxiliary hydraulic set fo r azimuth and pitch. These hydraulics are in tu rn c o n tro l led by separate electronic c o n tro l systems, hereinafter re ferred to as T h ru ste r C o n tr o l Systems o r TCS. The TCS command is e ith e r a manual co m mand fro m the T h ru ste r c o n tro l Console (de H oop G roenpol supply) o r a com puter command fo r the coordinated control. 3. T h r u s te r C o n tr o l S ystem A ll th ru s te r C o n tro l Systems are designed and manufactured by de H oop Groenpol, according to the basic requirem ents o f B.P. As m entioned above, each th ru ste r is equipped w ith its ow n TCS w hich has the fo llo w in g main functions, w here appli cable: a. C o n tro l o f azimuth o r steering angle, operated by a manual lever in the Bridge C o n tro l Console, the command fro m the coordinating com puter, o r (fo r the tw o a fte r thrusters only) an au to p ilo t system. b. C o n tro l o f pitch angle o r propulsion pow er, w ith the associated pro te ctio n o f the T h ru ste r e le ctric m o to r, oper- 1990 ated by a manual lever in the Bridge C o n tro l Console, the command from the coordinating com puter, o r (from the tw o a fter thrusters only) the p ro pulsion telegraph system. c. C o n tro l o f re tra ctio n /d e p lo ym e n t d. Indicators fo r the tw o positions at (c). e. Generation o f alarms in case o f a mal function. f. Safety interlocks. g. C o n tro l o f auxiliary pumpsets fo r azimuth and pitch. The TCS fo r each th ru s te r is galvanically isolated and is subdivided as follows; Bridge C o n tro l console Engine Room C o n tro l Panel F ollow -U p C o n tro l Cabinet Local C o n tro l C abinet All the controls and indicators fo r the man ual c o n tro l o f each th ru ste r are arranged in the Bridge C o n tro l console. The Engine Room C o n tro l Panel contains pushbuttons and indicators to operate and stop the various auxiliary pumps o f each thru ster and, additionally pitch co n tro l o f the a ft tw o thrusters by means o f pushbut tons. Furtherm ore, this panel contains a special ly designed logic panel fo r each th ru ste r where an o p e ra to r can fo llo w a start o f a >' t ' m * The Stern Dynamic Positioning Control Thrusters on the British Petroleum SWOPS Vessel’Seillean'. com plete th ru ste r unit and is notified in case the starting sequence is stopped be cause o f malfunction. The F ollow -U p C o n tro l Cabinets (one fo r each T h ruster) contain almost all o f the electronic controls. The Local C o n tro l Cabinets (one fo r each T hru ster) are placed near to the thrusters and are used as extended junction boxes fo r a signal w irin g to and fro m the th ru ste r unit. Furtherm ore, they contain the elec tro n ic main-amplifiers fo r the hydraulics and, in the fro n t d o o r o f the cabinet, all controls and indicators are available fo r emergency c o n tro l o f the th ru ste r. This p ro je ct involved a substantial am ount o f special design w o rk in electronics, as all projects o f de H oop G roe npool, w hen de signing and manufacturing offshore installa tions. Choise o f p o w e r supply voltages, num ber and lay o u t o f c o n tro l panels, interfacing are purpose designed and built fo r indi vidual applications. FROM VUYK SHIPYARDS TO VUYK ENGINEERING T r r ; - .- ;r i~ 'n. ji .....; i i i i:il i ^ . — ,.,'i . . i •. -irI h! I i i i. M mmm & fis rtjis 2 ö *s iE HUE ^ j r g p ^ j f »1583383* y, Before A. Vuyk & Zonen’s Shipyards B.V., founded in 1872, decided to pull o u t o f H olland’s fading shipbuilding industry in 1979, it scrutinized its 107 years o f expe rience. Rather than waste o ve r a century's w o rth o f expertise gained as one o f H olland’s well know n shipyards, President D ik Vuyk deci ded to make a drastic change in the firm ’s identity. High volum e ship construction was shifting away fro m Holland due to less labour costs in the Far East. Instead o f failing, D ik Vuyk succeeded in turning his company into one o f today’s leading marine engineering firms. Vuyk Engineering B.V. operates fro m the same office which once was the cente r o f acres o f construction terrain. The grand shipyard has been converted in to a spraw ling suburb. Its streets named a fte r some of the 900 vessels b u ilt at the shipyard since it was founded fo u r generations ago by D ik V uyk’s ancestor, Adrianus Vuyk. Today, Vuyk Engineering has a highly quali fied staff o f engineers, naval architects, and draftsmen, w ho provide both shipbuilders and ship ow ners all o ve r the w o rld design expertise fo r all phases o f the building p ro cess. The company draws fro m a pool o f over tw e n ty in-house engineers, m ost are w ith the company since the shipbuilding days. It also uses independently contracted marine engineers. A t Vuyk, th e design o f a vessel often begins w ith feasiblity studies, a fter w hich the staff perform s all the necessary calculations on m odern machinery and state-o f-th e-art co m puter software. Consultants estimate costs, provide p ro duct inform ation, set technical specifica tions, and w ill also prepare manuals as part o f comprehensive a fte r sales service pack age. For clients w h o are ship owners, Vuyk w ill also evaluate bids, make an assessment o f possible shipyards to be contracted, and assist at negotiating the contract. Management services and engineering sup p o rt are also available to the client, as well as supervision during actual construction. ’It is m ore cost effective fo r shipyards to use o u r design resources,’ said D ik Vuyk. ’W e relieve them o f having to support a design staff all year round.’ Vuyk Engineering has draw n up plans fo r c u tte r suction dredgers up to 12,000 hp, suction hopper dredgers up to 5000 cubic metres, and split barges/dredgers up to 3000 cubic metres. The firm also prides it self in experience w ith stone-dumping ves sels, ferries, h e licopter carriers, oceano graphic vessels and chemical tankers. T h e e x te n t o f the planw ork and the de tails set in the drawings enabled the builder to co n stru ct the vessel and install the ma chinery t o high standards’, said th e chief SenW 57STE IA A R G A N G N R 2 vuyk engineering R o tte rd a m 1990 engineer fo r a N e w Zealand o w n e r that contracted the design o f a splitting suction dredger. The chief engineer also credited Vuyk En gineering fo r the c ra ft’s is exceeding p e r formances. Here are some o f Vuyk Engineering’s o ther projects: A coral/dredger fo r N o rth Queensland Engineers and Agents in Cairns, Australia. Vuyk designed a fully autom ated dredger w ith a 25 m e te r barge loading boom. O ne o f the tw o barges, m oored alongside the dredger by an autom atic hydraulic m o o r ing system, can be filled w ith 2750 tonnes of coral in tw o hours. A fte r looking at the w orlds dredger designers, N Q E A and Q C L chose Vuyk Engineering. A grab dredger fo r the Indian G overn ment, to be deployed in C ochin H arbour, India. On special request fro m the Indian autho rities, Vuyk custom designed this 85.5 me te r long dredger w ith fo u r grabs, each able to move 190 cubic m etres per hour. The thick layer o f mud on the flo o r o f C o chin H arbour necessitated a six line- an chor m ooring system fo r the 2300 tonnes capacity vessel. Detail engineering was done fo r contrac to r K. Damen Shipyards H ardinxveldGiessendam. A 2500 HP tug fo r the Belgian govern ment. The tug is presently being desinged fo r Rupelmonde Shipyard in Belgium, com pletely equipped to fig h t fires and w ith buoy laying facilities. Special cargo shuttles fo r N ie v e lt G oudriaan R otterdam to transfer approxim ately 175,000 tonnes o f cargo annually along the Gota Canal in Sweden. Six times a w eek the ’Shuttle G othenburg’ will carry fuel inland to Karlstad in fo u r storage tanks situated under a deck fo r ro ro cargo transport. O n the way back the ship w ill carry fo re s try products. Vuyk Engineering has supplied designs to shipyards and ow ners in Australia, N e w Zealand, India, the Middle East, and W es tern Europe. A group o f Chinese engineers recently came to the firm to learn split barge design methods. The firm ’s history is p a rt o f its present identity. W hile o th e r marine design firm s approach th e ir w o rk fro m a scientific p e r spective, Vuyk Engineering remains co m m itted to a pragmatic approach. D ik Vuyk: 'O u r main advantage is the con tinual influx o f experience gained by o u r engineers. They are constantly designing ships and always have the edge w ith th e ir superior expertise.’ SenW 57STE IA A R G A N G NR 2 115 m HET HARTVANEEN DIESEL-MOTOR POMPT EIK FORMAATSCHIPZO’N 45 KEERDEAARDERONI Een SKL dieselmotor is er voor elk formaat schip, groot of klein. Brand levert de SKL motoren, bouwt ze snel en deskundig in en heeft als alleen importeur een uitgebreid magazijn zodat welhaast ieder onderdeel uit voorraad leverbaar is. Bij eventuelelstoringenkunt u,,24 uur per dag een beroep doen op het deskun j l dige service-apparaat van Brand w ^ zodat u snel weer uw vaart kunt hervatten. Vraag informatie aan over wat Brand en SKL voor u kunnen betekenen. PJ.BRRnD bx> motoren CHRIS-MARINE Maintenance tools for marine diesels M aasstraat 2-8 Postbus275 3300 AG Dordrecht Tel. 078-148522' ® aalborg boilers (hólland) bv Reduce maintenance costs, install maintenance equipment from CHRIS-MARINE known and acclaimed the world over. - Valve-seat g rin d in g m achines - Exhaust valve grin d in g m achines ■ Cyllnder-liner-, cylin de r-cover g rin d in g m achines • C ylind er lin er honing m achines „ lin e r d e gla zer" - Valve spindle su p p o rt g rinding m achines PLEASE APPLY FOR FU LL D O C U M ENTATIO N Agent and stockholder for: Chris-Marine«Amot*Storebro*lngersoll Rand THOFEX B.V. G o u d s e s in g e l 6 3 -6 5 - 3 0 3 1 E E R o tte rd a m P o s tb u s 2 2 0 2 2 , 3 0 0 3 D A R o tte rd a m On board ships at sea. Or in port. BURNERS M ANAG EM ENT & CONTROL SYSTEMS REPAIRS SERVICE & SPARES • • • • • • All M arine Boilers • Supervision, Inspections & consultancy o f repairs B u rn ers m anagem ent C om bustion control W aste oil C om bustion Feedw ater & safety alarm control Electric C ontrol Panels T e le fo o n (0 1 0 ) 4 1 2 0 2 9 0 T e le fa x (0 1 0 ) 4 1 3 5 4 6 9 A l 16 Member of A a l b o r g C i s e r v I n t e r n a t i o n a l - th o worldwide s e m c e c o o ca p l- G iessenw eg33 » w a k Rotterdam Telefax 31-10-4370346 T e i « 2 7 4 6 7 »ait» ni Phone 0 1 -1 0 ) 4624677 SHIPS TO OUR OW N FORMULA The best, the last word, super-ship, these are superlatives which could be used to describe the term ’Ultimate Container Carrier (UCC)’. Nedlloyd Lines has ordered five ships o f this type and Nedlloyd's Newbuilding and Research department was responsible for the revolutionary design. also in making the vessel container-friend ly. D uring the developm ent o f the Happy Buccaneer, the idea was put fo rw a rd o f d o ing away w ith hatchcovers because on these heavy-lift vessels the special cargo on the "tw eendecks" often p rotrudes way above the main deck.’ 'W e carried o u t experim ents at the Ship building Research Laboratory (NSP) in Wageningen, using a model and simulating Shipbuilding W e mentioned, quite m a tte r o f factly, that the N ew building and Research de p a rt ment designed the ships, but ho w exactly is this done? W h o decides that new ships should be b u ilt o r how large they should be? W h o designs new features? W h o puts them into effect? W h o supervises building abroad? T h irte e n flo o rs D ra w in g d iffe rs T o start w ith the first question,’ says M r R. K. Hansen, head o f the N ew building de partment, ’it is N edlloyd Lines th a t decide w hether newish ips are needed and w hat capacity and speed they should have and w hether they have to be able to transit through the Panama Canal. This is fo llow ed by discussions betw een N edlloyd Lines and our departm ent. A t this stage the design o f the ship is not ye t finalized. A ship de velops; it is n o t a m a tte r o f simply making a drawing and having a ship built. W e are continually making im provem ents to the design o f a ship and changes are also regu larly made in consultation w ith authorities and the shipyard. A t the m om ent, w e are w orking on a drawing w hich differs fro m the idea th a t w e firs t put fo rw a rd . And it w ill quite likely be changed again a few times.’ building departm ent. A large, labour inten sive p ro je ct, particularly in view o f the fact that P & O had another fe rry, the Norsea, bu ilt on the basis o f the same design. Both ships had to be identical w ith respect to design, technology and accommodation. ’I call them tw ins w ith one father and tw o m others,’ continues Hansen. 'The jo in t de sign was b uilt by tw o diffe re n t shipyards. And th a t is difficult. Everyone has his ow n in te rp re ta tio n , uses d iffe re n t material and diffe re n t building methods. A great deal o f coordination is necessary to achieve iden tical ships.’ Enginebuilding e xtre m e ly rough sea conditions w ith wind force ten to tw elve. There, you can also change the d irection o f the waves and let the sea come head on at a slant o r, fo r e x ample, athwartship. These experim ents, w hich w e re conducted in consultation w ith the Shipping Inspectorate, dem on strated th a t the Happy Buccaneer could sail w ith o u t hatchcovers, be it only to a certain draught. O u r experience w ith the Happy Buccaneer set the plans in m otion to develop this system fo r o th e r ships.’ T w in s A n o th e r im p o rta n t p ro je c t during those years was the developm ent and building o f the fe rry N orsun fo r N o rth Sea Ferries. This was a combined design by Nedlloyd's N ew building departm ent and P & O's In the past, when designing cargo vessels, the emphasis was principally placed on economization. Fuel consum ption was cut back, th e re was a rationalization in the number o f c re w and the ships w e re com puterized. But the costs in p o rt continued to be very high. Hansen adds: 'W e asked ourselves at the tim e w h a t we could do to reduce p o rt and loading expenses fo llo w ing the reduction o f costs obtained during the sea voyage. Between times, w e also w o rk e d on a small containership and here w e made use o f o u r experience w ith the design fo r a ship w ith o u t hatchcovers. The vessel itself was never built. H ow ever, we ke p t the plans and said at the tim e th a t whenever there was a demand fo r large ships, this concept w ould be easy to apply. A nd th a t demand came.' ’W e always believed th a t the costs o f car go handling fo r containerships w ere reasonable because they w e re handled ef ficiently. But this is n o t true. The container crane has to p e rfo rm far m ore actions than just lifting the containers on and off. The hatchcovers have to be rem oved and they are p re tty heavy. C ontainers have to be moved around on deck to allow the hold Vessel w ith o u t h a tch co ve rs A fte r the delivery o f th e N edlloyd Van Diemen, the N ew building departm ent did not sit idle, o f course. According to Han sen: 'Since 1984, w e have been very active. W e have w o rke d - also fo r th ird parties on the design o f small cruise and cargo ves sels and have negotiated w ith shipyards fo r the building o f th e m .’ ’I shall tell you a little m ore about the tw o largest projects. I’ll sta rt w ith the Happy Buccaneer. T o g e th e r w ith M am m oet Ship ping, w e designed this heavy-lift vessel and had it b u ilt in Japan. W e made a clear con trib u tio n such as the determ ination o f the main dimensions, the fo rm o f the ship and SenW 57STE IA A R G A N G NR 2 ...a drawing that differs from the idea that we first put forward Nedlloyd Lines under them to be unloaded. This is n o t a planning e rro r, one simply cannot avoid it. And then there are o th e r costs, such as securing the containers on deck . For this, you need people to climb on the contain ers in all weathers in o rd e r to lash them down. Even the alternatives cost e x tra tim e and manpower. From all these disad vantages and experiences w ith earlier de signs, the idea was eventually conceived o f container guides, p rotru d in g above the up per deck. You could say th a t it is like an elevator shaft fro m below decks continu ing to the to p m o st container. This to p lay er, by the way, consists only o f em pty con tainers. In connection w ith stability, full containers cannot be placed th e re .' A V e a l’ c o n ta in e rs h ip The concept o f a containership is th a t o f a ship w here a large num ber o f containers are stored in the hull and few on deck. Ex amples o f this are the N edlloyd D e lft and the N edlloyd Dejima. A fte r 1970, how ever, numerous containerships w e re built w ith a lo w e r hull. This type o f ship is cheaper and has a smaller cargo capacity, resulting in savings on har bour dues and also w hen passing through the Suez o r Panama Canal. A consequence o f the low hull was th a t m ore containers w e re placed on deck. A deviation in fact fro m the original concept. A disadvantage o f this type o f ship is th a t many m ore ac tions are required than just loading and un loading. 'I p re fer to call the new ship, the U C C , a "re a l" containership', says M r J. M, Huisman, head o f Shipbuilding departm ent, ’be cause in this ship you d o n 't have to move the containers around so much and they d o n 't need to be lashed dow n.' 'A fte r all, the purpose o f a tra n p o rt chain is to transport a consignment fro m 'd o o r to d o o r' as quickly as possible, isn’t it? But w hat do we have in the conventional con tainer vessels? A stack o f containers on to p o f the hatchcovers. If one o r m o re contain ers in the hold have to be discharged, the hatchcover w ill firs t have to be cleared and then removed. That takes a lo t o f tim e !' 'O u r research has shown th a t you can do away w ith the hatchcovers. You d o n 't need them to strengthen the ship and they are only e xtra w eight. N o w th a t the con tainer guides are continued above the level o f the upper deck, lashing do w n is e lim i nated. This means th a t you get less damage to the cargo and containers and it p ro motes safety.' These new ships, in fact, consist o f three series o f five. The firs t series in the 'smal lest' type. The second series has the same w id th b u t is slightly longer and has dim en sions w hich still allow it to pass through the Panama Canal. W hen fully loaded, this type o f vessel has to carry a great deal o f w a te r ballast fo r the sake o f stability. The th ird series is just as long as the second (in connection w ith the quay length o f ap pro xim a te ly th re e hundred m etres in m ost ports), b u t it is w ider. T herefore, these ships have b e tte r stability and can carry ad ditional containers instead o f ballast w ater. But they cannot pass through the Panama Canal and w ill, th e re fo re , be employed on the long routes outside the canal.’ S a fe ty The layman w ill im m ediately ask w h e th e r in a ship w ith o u t hatchcovers the cargo doesn’t get w e t, w h e th e r the ship doesn’t fill up w ith w a te r if it rains hard o r if there As you w ill have seen fro m this a rti cle, the specifications fo r the five ships on o rd e r have n o t y e t been finalized. The provisional figures are: capacity 3,100 TEU service speed 23,5 knots to ta l length 267 m etres length betw een the perpendiculars 251 m etres breadth 32,24 m etres height 23,25 m etres maximum draught 12,5 m etres deadweight 50,000 tonne A num ber o f holds are sufficiently large to allow them to accomm o date the fu tu re supercontainers to o . These may measure 45,49 o r 52 fe e t w ith a height o f 8,5 o r 9,5 fe e t and a breadth o f 8 o r 8,5 feet. A g re e m e n t still has to be reached in this respect, how ever, w ith th e ISO, the International Standard O rgani zation. is a severe storm , w h e th e r the pumps al ways keep on w orking, etc. Huisman: 'These questions are quite understandable, b u t a container gets w e t on a tru ck, gets w e t at the term inal and gets w e t on the deck o f a ship. A container is desingned to w ithstand this.’ 'W ith regard to th a t w ater, you must re m em ber th a t these vessels have been de signed in such a way th a t in principle the w a te r stays outside. T hat was the basic principle o f the new design. The hull is straight and high. If w ater, nevertheless, comes as high as that, it is m ostly spray and no longer has any volume. F urtherm ore, the capacity o f the pumps is so large that spray and ra inw ater are im mediately pumped away. The containers don’t even get w e t feet. Even if the e n tire engine ro o m stops w o rkin g , fo r example, the pumps continue to function.’ 'W e carried o u t extensive tests in W ageningen w here w e w e re able to simu late the very severe storm s which occur w est o f Ireland and east o f Japan; as far as the w e ather is concerned, these are the w o rs t areas in the w o rld . And the result? The quantity o f incoming w a te r measured caused no damage to the ship o r cargo. A b solutely safe.’ O n e in ste a d o f tw o The staff in the N ew building departm ent w o rk in th re e groups: Ship Building, Engine Building and Electrical Engineering. These three sections to g e th e r fo rm one team in w hich everyone has his ow n specialization. W e have already described Shipbuilding and we can only briefly explain a few as pects o f the o th e r groups. These cover the points w here the U C C ’s differ fro m previ ous ships o rd ered by N edlloyd Lines. From the p o in t o f view o f dimensions, the new vessels resemble the N edlloyd H oorn and the N edlloyd Houtman. This is w hy it is interesting to compare the propulsion of the ships. It clearly shows th a t technology is constantly improving. T h e H o o rn and the Houtm an have a capa city o f 52.000 hp supplied by tw o engines. The U C C 's w ill have 41,600 hp but sup plied by one engine only,'explains Mr. P. B. Philippa o f Engine Building: 'This solution is n o t only cheaper, it also saves space in the engine room , and requies fe w e r pistons, pumps and valves. In o th e r w ords, less maintenance and less w o rk fo r the crew. The new ships are getting tw o auxiliary en gines as opposed to fo u r o r six in oth e r vessels. A u xillia ry engines supply e lectrici ty on board, fo r example when the ship is in p o rt o r during manoeuvring. The new type ship is provided w ith a generator m ounted on the p ro p e lle r shaft which sup plies e le c tric ity at sea. In simple terms, this ge n e ra to r could be compared w ith a bicy cle dynamo. It is so large th a t it can also provide the p o w e r fo r a considerable num ber o f reefer containers.’ 'W ith regard to th e construction o f the engineroom , the situation is roughly as fo l lows: th e propulsion capacity th a t the ship m ust have, is determ ined by means o f m o del tests and w e base the engine o f the manufacturer specified by us on this. This is, subsequently, fo llo w e d by th e rough lay o u t o f th e engineroom. Y ou s ta rt by plac ing the large elements such as the main en gine and auxiliary engines, and then, fo r example, the w orkshop, pump groups etc. Pipes and smaller com ponents fo llo w later.’ V a lu e f o r y o u r m o n e y The new ships are being b uilt in Japan and th a t is a long way fro m Rotterdam . If you buy something, you also w a n t to know w h e th e r you are getting value fo r your money, but how can y o u r m o n ito r some thing th a t is being done so far away? M r. J. Penning has considerable experience in SenW 57STE jA A R G A N G N R 2 ... NEDLLOYD FLOWMASTERS0 TOTAL LOGISTICS Nedlloyd Your cargo in one uninterrupted move to your customers wherever they are. Nedlloyd Lines Nedlloyd Lines RO. Box 240 3000 DH Rotterdam Boompjes 40 3011 XB Rotterdam Phone 010-4006111 Fax. 010-4047160 Telex 24690 NEDL NL Nedlloyd Lines From left to right: P. M. Pauw, P. B. Philippa, J. M. Huisman, J. Penning and R. K. Hansen are the model o f the new containership with that o f the Nedlloyd Houtman. this respect. He used to w o rk in shipyards and' so he knows exactly w hat aspects to keep his eye on. The w o rd quality crops up frenquently w hen he talks w ith enthusiasm about his w o rk . ‘In fact it all boils do w n to a couple o f things,’ he says. 'First o f all, fig h t ing fo r the quality fo r which you have paid and, secondly, n o t sending the c re w to sea in an in fe rio r product. They must have a first-class piece o f equipm ent w ith no risk o f breakdowns. W e must ensure th a t the crew , the ship and the cargo can make a safe crossing. A t home it is quite norm al that w a te r comes o u t o f the tap and that the light goes on. W e have to ensure that th e re is sufficient w a te r and th a t the tap w orks, th a t p o w e r is generated and switches are at hand.' 'H o w do w e do this? As soon as the shipyard starts cu ttin g the steel, o u r N ew building departm ent has a Tests at the Shipbuilding Research Laboratory (NSP) in Wageningen. man on the spot and, later, he is joined by m ore colleagues. So you have to have your o w n organization at the shipyard which keeps in contact w ith the home fro n t. Fur th e rm o re , you cannot see everything from a drawing, something may have been left out, so yo have to check it o u t in practice. From left to right: The smallest type o f ship, the maximum Panama Canal size and the wider type which cannot pass through the canal. R o tte rd a m 1990 The tender Ships are n o t o rd ered at the firs t shipyard th a t comes along. Tenders have been invited fro m ten shipy ards in W e ste rn Europe and the Far East. Since European shipyards do not receive any governm ent sup p o rt, only Japanese and Korean shi pyards w e re left. Eventually the o r der fo r the five ships was given to the Japanese shipbuilding consotortium Mitsubishi Heavy Industries (M H I) and Ishikawajima Harima H e avy Industries (IH I), The o rd e r fo r any fu rth e r ships w ill not, how ever, be given autom atically to these shi pyards. Seperate tenders w il be invi ted fo r these. container. Constantly m onitoring the quality. G etting value fo r yo u r money. Later, w hen the ves sel is put into operation, some o f the cre w come on board to familiarize themselves with the ship during the tests.’ Last in line The th ird group in the N ew building de partm ent is Electrical Engneering. Actually the last in line because w ho, fo r example, can develop a lighting installation w hen the ship’s ultim ate shape hasn’t y e t been de cided? Once the shipbuilders and engine builders have th e ir plans on paper, w o rk can begin on the electrical installations. Mr. P. M. Pauw from the Electrical Engineering group explains: 'O n the basis o f the in fo r mation provided by the firs t tw o groups, I can start draw ing up the specifications fo r the ele ctricity and co m puter system. These specifications are an instruction manual fo r th e shipyard and contain, in ad dition to ou r quality and usage specificati ons, a description o f w here w e w ant eve rything to be located and ho w installations must be operated. The specifications also state w hat capacity o r p o w e r is necessary, how much light is required in which locati ons, w hat means o f com m unication are ne cessary per cabin and w hat kind o f com pu te r equipm ent w ill be installed, e tc.’ 'You can easily compare a ship to a small to w n . There is a p o w e r plant which generates power. A d istributio n system which w o rks like a Municipal U tility . T here are com m u nications (telephone, telex, satelite link, paging system etc.) as provided by any lar ge communications company. A nd there is an internal p o w e r system w ith light points, switches, plug sockets etc .’ ’And now a fe w aspects w here the new containervessels diffe r fro m previous ships. D uring the past few years, com m uni cation and com pute r technology has vastly improved. W e used to be confined to fixed SenW 57STE |A A R G A N G N R 2 telephone connections w hich meant th a t it was difficult to contact the people on bo ard. W e now have a paging system w ith bleepers. Before, this was impossible firs t o f all on account o f the sensitivity to in te r ference and d ifficu lt reception due to the ship’s large am ount o f steel.’ ’Especially in the field o f com puterization, enormous changes have occured. A larm situatiuons used to be re p o rte d by means o f small lamps lighting up. Later, a T V screen was used, w ith lamps as a back-up, because th o se T V screens w e re insufficiently reliable. Nowadays, everything is shown on the TV screen. The greatest advantage o f this is th a t you only need one cable instead o f the numerous ones to p o w e r each lamp. Fur th e rm o re , you can now call up all kinds o f inform ation fro m all o v e r the ship via that screen. A great deal o f a tte n tio n w ill also be paid to energy saving and to re liability.’ Why? These new ships are very necesary. N edlloyd is increasingly developing fro m a company which fo rm e rly provided 'p o rt to p o rt’ tra n sp o rt to a company w ith a ’d o o r to d o o r’ service. And sea tra n sp o rt plays a ve ry im p o rta n t ro le in a w o rld w id e tra n sp o rt system o f this nature. N edlloyd is once again about to ad apt its n e tw o rk o f liner services in o rd e r to keep up w ith the annual g ro w th o f container tra n sp o rt and this is w hy the new ship capacity is essential, p a rt o f the fle e t is econo mically obsolete and the new ships w ill, th e re fo re , be used to replace o ld e r types and chartered ships. N ew building and Research has a team o f experts w h o just get on w ith th e ir w o rk but, at the same tim e, th in k up and w o rk o u t brillia n t ideas, some o f which are ready to be used rig h t now w hile others are kept fo r use in the future. W e have marched thro u g h the N e w b u il ding and Research departm ent w ith sevenleague strides. Have fo rg o tte n many things, have not done people justice. But never mind: in the future w e shall, undoub tedly, be hearing a great deal m ore about the construction o f the ’U ltim a te C o n ta i ner C a rrie r' and w e are already looking fo rw a rd to taking these ’real’ containerships into operation. JHS 12 1 R o tte rd a m SMIT INTERNATIONALE NEDERLAND BV 1990 SMIT INTERNATIONAL HEADING FOR THE FUTURE w ith the 1986 oil price collapse aggravat ing problems in a vital m arket sector. Many salvage companies, including Smit, have reacted by diversifying in to new m ar kets offering stable income and m ore sec urity. S m it’s response has been to develop contracting and p ro je ct management ac tivities, particularly in the offshore and civil construction fields. Good progress has been made. In the civil construction arena, Sm it has carried o u t a series o f m ajor bridge contracts. O ne o f the latest, in the U K, calls fo r a phased programme o f heavy lifts fo r the new D artford Bridge, w hich w ill span the River Thames. The civils projects are becoming larger and more com plex, allowing Smit to dem on strate its p ro je ct management skills in this im portant new market. In salvage w o rk , the era o f lone tugs on station has been sw ept away by m ore modern, cost-effective salvage concepts. Teams o f experts and specialised equip Exactly 150 years ago, enterprising Kinderdijk shipbuilder and shipow ner Fop Smit decided to start a tow age service to assist vessels calling at po rts in the south w est o f the country. W hen Fop Smit died in the 1860s, his company had a fleet o f six tugs w ith a to ta l capacity o f 500 hp. He could n o t have know n that he had laid the foundation o f w hat has since emerged as one o f the w o rld ’s largest towage, salvage and marine contracting companies, w ith a fleet o f some 300 vessels. Today, Smit International is an integrated group active w o rld w id e in the marine and civil engineering industries. Headquar tered in Rotterdam , the group has a tu rn over o f FIs. 600 m illion, some 3,000 em ployees and offices in the U nited States, Venezuela, W e st Germany, the Middle East and the Far East. Beyond the tra d i tional activities o f tow age and salvage, group companies are also engaged in civil contracting, offshore supply, heavy lift and ocean transportation o f heavy objects. In the salvage sector, it is d ifficu lt to select highlights fro m the many hundreds o f operations carried o u t in often hazardous circumstances at re m o te locations around the w o rld . H ow eve r, a number do stand o u t as having special significance. They in clude: the lift o f a 7500-tonne section o f the tan ker Betelgeuse, which exploded at an Irish oil term inal; the recovery o f the M ont Louis’ cargo o f radioactives; the re scue o f o ve r 30 missile casualties during 12 2 __________ 3 the G u lf W ar; and the re-floating o f the capsized fe rry Herald o f Free Enterprise. The group's resources include a large fleet o f 'sheerlegs' floating cranes, to g e th e r w ith specialised salvage vessels, heavy pull barges, diving support vessels, pontoons and heavy transportation semisubmersibles. In addition, Sm it operates a large fleet o f offshore support and supply vessels in the N o rth Sea and elsewhere in the w o rld . Meanwhile, Smit retains its position as the largest tug o p e ra to r serving the R o tte rdam -E uropoort. It has a fle e t o f 50 harbour and coastel tugs, w ith additional units en gaged under co n tra ct overseas. C h a n g in g M a rk e ts For some years, the global m arket fo r sal vage services has been in decline. Im prove ments to ship design, b e tte r communica tions and aids to safe navigation - to g e th e r w ith a host o f o th e r factors, including tougher regulation - have reduced casual ty rates. In addition, ships are generally larger, m ore com plex and present new challenges to the salvor. This is one o f the reasons w hy w o rld w id e salvage capability has diminished. This situation is marked by less w o rk , falling levels o f rew ard in rela tio n to salved value, g row ing commercial risks (especially the application o f no cure - no pay term s fo r large w re c k removals) and the high costs associated w ith the maintenance o f salvage cover on a roundthe-clock basis. The ocean tow age m arket has also been depressed fo r some years, _ SenW 57STE jA A R G A N G IN r\ t- m ent are now airlifted to the area o f an emergency. Even the character o f marine emergencies has changed, w ith incidents involving hazardous and to x ic substances assuming much greater prom inence. A n example is the case o f the Markham Bay, a cargo ves sel w hich encountered difficulties during a call at Singapore. Sm it salvage teams saved the vessel, which came close to capsizing, and then dealt w ith the cyanide which had contaminated much o f the rest o f M ark ham Bay’s cargo. P rom pt action by the sal vors prevented a major disaster. D uring lean years in the offshore market, Smit benefitted fro m the security o f its global spread o f w o rk . It is now w ell positioned to strengthen m arket share fo l low ing the significant upturn in rates fo r anchor handling supply tugs seen o ve r the past 12 months. Today, Sm it’s commercial strategy is founded on the developm ent o f business in new geographical areas - ofte n in jo in t venture w ith high quality local p a rt ners. - Sm it is also keen to develop its grow ing p o rtfo lio o f activities in overseas ports. The drive to open up new m arkets abroad is coupled w ith m ore aggressive m arketing in N etherlands ports. L o o k in g ahead Smit intends to build on its track re cord o f achievement in the civil construction field. Its cranes, specialised vessels, underw ater engineering expertise and o th e r resources w ill be in great demand as infrastructural programmes - from p o rt projects to bridge-building schemes - accelerate in Europe (largely as a result o f the Single M arket initiative) and in the w orld 's de veloping economies. The environm ental field is another target fo r expansion o f the gro u p ’s activity base. Once again, the G roup has the experience and hardware required to react in crisis situations to prevent o r minimise pollution damage. It also sees new m arkets in the en vironm ental sector fo r contingency plan ning and training services. N o w fo r the n e xt 150 years! RDM Rotterdam RDM A VERSATILE DUTCH COMPANY RDM was founded in 1902 as a company specializing in the repair o f ships and th e ir equipment. W ith in a s h o rt tim e, building o f merchant as w ell as naval vessels was added to the company's g row ing range o f ac tivities. In the merchant marine sector the building o f tw o giant luxury liners the 'N ie u w A m sterdam ’ and the 'R o tte rd a m ' form ed a m ilestone in R D M ’s history. Starting in 1930 the developm ent and construction o f submarines became a company specialty in the defence sector and gave outstanding perform ance in service w ith the Royal N etherlands Navy. In the same period the production o f guns and how itzers fo r navy and arm y applications was added to the p ro d u ct range as an im p o rta n t starting p o in t fo r R D M ’s present position in this field. A lthough RDM operates under normal comm ercial m arke t conditions, a special relationship w ith the D utch G overnm ent has historically developed in the defence as w ell as in the civil sector, resulting in a good understanding and efficient com munication. O n the basis o f sound financial results, RDM is able to continually invest into developm ent o f its c u rre n t products and fu tu re m arkets as w ell as investm ent in equipm ent, p roductio n c o n tro l and human resources. R D M ’s premises are situated along one o f Europe's main waterways, in the w o rld ’s largest p o rt R otterdam , w ith free access to the m ajor industrial areas and open to the sea. R D M ’ activities are divided into th re e in dustry groups: Naval Engineering, General Engineering and Energy Systems. N a v a l e n g in e e rin g As the designated submarine builder fo r the Royal Netherlands Navy, RDM has gained a wide experience in the design and construction o f submarines. This is appa re n t in the c u rre n t p ro d u ct range: the 2800 to n WALRUS-class and the range o f MORAY-class submarines, a flexible hav ing 1100 t o t 1800 ton submerged displace m ent. These submarines have several ele ments in com m on: integration o f proven equipm ent, lo w noise levels, high shock re sistance and cost-effectiveness. R D M ’s range o f submarines provides fle x ib ility o f design in response to various custom er re quirements. In addition, RDM is a supplier o f naval guns, to rp e d o tubes and to rp e d o handling sys tems as w ell as solid and h o llo w -b o re d shafts fo r ships’ propulsion systems. 1990 H elicop ter landing grids and decklocks, pe rm ittin g h elicopter operations on board ships in conditions up to sea state 6-7, have found w ide acceptance. G e n e ra l E n g in e e rin g This industry group develops and supplies advanced products and systems fo r civil and defence markets. In the civil sector General Engineering Handles a range o f projects w hich are certainly non-routine, just one example is the im portant role RDM played during the construction o f the Eastern Scheldt S torm Surge Barrier, one o f the largest hydro-dynam ic projects in Europe, if n o t in the w o rld . RDM as main co n tra c to r was responsible fo r manage m ent, manufacturing, installation and sta rt up o f the 124 hydraulic opening and closing mechanisms o f the gates. For such projects RDM had the means: fro m C A D /C A M facilities to tem perature-com pensated machining tools. W ith in this group D e fence Engineering form s a main field o f ac tivities. O rdnance has been a speciality fo r many years. The present prod uction p ro gramme includes the RDM M I 39 to w e d 155 mm field h ow itzer, the upgrading o f the M l 14 field h o w itz e r into M l 14/39 as w ell as the m odification o f the 40L70 anti aircraft guns and the M l 09 self-propeller how itzer. M odification and production o f wheeled and tracked vehicles (o f the APC, AIFV and A R V categories) and systems fo r main battle tanks fo rm another im p ortant range o f activities. A n ti-ta n k missile laun chers have been integrated into A P C ’s. And in addition, R D M ’s Defence Engineer ing has gained a w ide experience in the 5th echelon overhaul o f heavy armed vehicles and weapon systems. E n erg y S ystem s Steam turbines and ancillary components fo r coal-fired and nuclear pow er-genera ting plants fo rm one section o f the produc tio n activities o f Energy Systems. Engineering know -how , extensive machin ing facilities and s tric t quality c o n tro l p ro cedures o ffe r a solid basis fo r the produc tio n o f these com plex systems and com po nents. The o th e r section is the p roduction o f pressure vessels fo r the petrochem ical and o il- and gas industry as w ell as fo r nu clear steam generating plants. In addition structural com ponents fo r the offshore in dustry. RDM has extensive experience in the use o f special steels, clad steels and weldoverlay cladding, n o w demanded fo r m ore aggressive processes. RDM has the experts and craftsmen to supervise projects. From inception through p ro je c t management to a fte r sales services, including instruction and maintenance, RDM delivers tail-made p ro ducts. 125 Verolme Botlek Rotterdam. Quality and Flexibility. We take care of all your repairs, from routine mainte nance, damage and in-port repairs to the most complex projects. We can drydock any size of vessel and off shore unit. With our reorganised company structure, operating independently and cost reducing measures we are ready for the 1990’s and 24 hours a day at your service. Verolme Botlek, Prof. Gerbrandyweg 25, 3197 KK Rotterdam Botlek, The Netherlands, telephone (+31) 1819-14644. Telefax (+31) 1819-18082. lelex 29710 vebo nl. Representatives all over the world. l U — ^ ■ Z51u33 *51!mMU—!l ry d o c k m g , repair, c o n v e rs io n in ro tte rd a m AI 26 6154 VEROLME BOTLEK, PAST, PRESENT AND FUTURE O rig in The shipyard's history began in 1957, w ith the opening o f the new ly constructed facilities in the R otterdam B o tle k p o rt area. Shiprepair activities, initially centred around thre e floating docks w e re e x panded in 1962 w ith tw o graving docks, enabling the yard to drydock ships up to approx. 100.000 d w t. The rapid increase in ship sizes required the construction o f dock 7 fo r vessels up to 500.000 d w t, which was com pleted in 1970. Towards the middle o f th e 70's tw o m ajor economic factors affected the yard’s activities. The V LC C m arket collapsed, w hile offshore and oil and gas e xp lo ra tio n and production, in particular in the N o rth Sea, saw m ajor expansion. Thanks to the modern facilities and especially w ith the giant dock 7, cap able o f handling even the large offshore rigs, the company was w ell positioned to adapt t o these changed m arket conditions. By 1980 the ship newbuilding departm ent was closed and the company concentrated itself exclusively on the ship and offshore repair markets in which the yard obtained strong m arket positions. Today and to m o r r o w The location o f a ship and offshore repair yard is almost as im p o rta n t as the facilities it can offer. Bearing this in mind V erolm e B o tle k ’s position could hardly be be tter. The yard lies in the heart o f N o rth W e st Europe, in the industrial area o f R o tte rda m -E u ro po o rt w ith an open connection to the N o rth Sea. It is the firs t available yard fo r ships entering the P o rt o f R o tte r dam. The yard is capable o f accom m odat ing in d rydock any type o r size o f vessel and virtually all existing drilling rigs both jackups and semi submersibles, as w ell as the View on present ship and offshore repair activities. Furthermore in drydock no. 6 multifunctional use o f drydock facilities, viz: construction of concrete caissons by Ballast Nedam n.v. SenW 57STE jA A R G A N G N R 2 127 Mr. Albert van Nieuwkoop, Managing D irector Verolme Botlek. Verolme Dock and Shipbuilding Company Ltd, Ship newbuilding and repairs. (Drydock No. 5 and 6 under construction) largest crane and d e rrick barges, pipelay barges and o th e r offshore construction units. T o g e th e r w ith its favourable geo graphical position, this capability has re sulted in an re cord o f m ajor repair and conversion projects o f a large num ber of offshore structures. Rapid developments in shipping and offshore markets require high operational fle xib ility, advanced tech nology and a highly-trained multi-skilled w o rkfo rce . V erolm e B otlek actively pur sues new solutions fo r the changing ship and offshore repair and maintenance indus tr y in o rd e r to m eet the challenges o f the 90’s. Since tw o years V erolm e B otlek has embarked on a w hole new philosophy for the ship and offshore repair industry, o ffer ing O w ners and O perators, n o t only con ventional repair facilities and services, but also the use o f the yard under a new 'ser vice station approach’. This service station approach involves the use o f the yard's ex tensive facilities by O w n e rs wishing to sub-contract repair operations to special ised companies o r carry o u t th e ir ow n re pairs. This fundamental change in policy was firs t trie d by V erolm e B otlek and Man aging D ire c to r A lb e rt van N ie u w ko o p re cently com m ented: T h is philosophy, new to the repair industry, has been prom oted th ro u g h o u t the conventional and offshore markets and has been accepted by many to be an ideal answer to th e ir requirements'. D uring 1989 V erolm e B otlek has won three m ajor offshore repair and mainte nance contracts. The Italian registered 'M icoperi 7000', w o rld ’s largest crane ves sel, which required the renewal o f 800 m p ip e w o rk ranging in diam eter fro m I to 2 m etre. F u rth e rm o re the m odification of the 250.000 d w t Floating Storage Unit 'Shell/Esso Fulmar FSU\ requiring exten sive survey, installation o f thrusters, fabri cation o f the required trunks, installation o f g enerator sets etc. T h is proved the fle x ib ility o f V e ro lm e Botlek, being able to cope w ith extensive projects including un planned maintenance w o rk arising during the execution o f a p ro je c t’, said Mr. Van N ie u w ko o p . D uring D ecem ber European Marine C o n tra c to rs Ltd. (EMC) awarded V erolm e B otlek the contract fo r extend ing th e firin g line o f th e pipelaying vessel 'C a sto ro Sei', which results in an extension o f the conveyor deck and superstructure w ith approx. 13 m. This requires approx. 220 tons in steelw ork. Redelivery o f the pipelaying vessel w ill take place during the second half o f February 1990. Also on the ship repair side the yard’s activities were satisfactory w ith a high occupation level of the various facilities and an increase in tu rn o v e r compared w ith the previous year. There is a confidence in develop ments during 1990. 128 SenW 57STE jA A R G A N G N R 2 m M M '.BijH ij cMg pe tros6£N m g m * l& d n tz . P •«Sfessr er DUTCH OFFSHORE TRAINING CENTRE DEN HELDER p j& ft Y #!**?® - VEILIGHEIDS .— — — —- —... — Eigenlijk is het m vreemd dat niet iedereen er gebruik van maakt: 5 =_____ een jaarlijkse inspektie V M M J W Ó G E N H J U ä B D Z V ... 1 van de scheepshydraui s m s u s » » i— liek. Als gebruiker weet u A. raw th r Hahfwi t o / JjVf— — — dat de veiligheid op uw schip alleen optimaal kan zijn, met goed werkende hydraulische systemen. Het kan om een stuurmachine gaan, of een hefbaar stuurhuis, maar bijvoorbeeld ook om een autokraan. Van der Velden-veiligheidsinspektie biedt: een jaarlijks terugkerend kontrole-bezoek waarin al uw hydraulische systemen nagekeken worden. Lekkages en foute afstellingen worden opgespoord en de hydraulische apparatuur w ordt nagemeten en getest. In het inspektierapport kunt u dan precies zien wat er aan onderhoud en reparatie moet gebeuren. En is alles in orde, dan ontvangt u bij het inspektierapport een veiligheidscertifikaat. Een prettige garantie, want Van der Velden is al ruim 25 jaar aktief op hydrau lisch gebied. Daarom kunt u ons ook inschakelen bij repa raties, want ook op dat gebied hebben we onze sporen verdiend. Van der Velden heeft een monteursteam, dat 24 uur per dag tot uw beschikking staat. Een telefoontje is voldoende. Een jaar na de keuring krijgt u dan een herinneringsbericht voor de nieuwe jaarlijkse inspektie. Uiteraard is de veiligheidskontrole niet gratis, maar preven tie is wel kostenbesparend. Van der Velden, in Krimpen aan de Lek, vervaardigt, onderhoudt en repareert al meer dan 25 jaar scheeps apparatuur. Zij richt zich daarbij op het betere produkt en de betere service. W ant uit ervaring weet zij dat in de scheepvaart die twee zaken bovenaan de lijst staan. Het leveringsprogram m a van Van der Velden om vat: • Roeren (norm aal balans en hydrodynamisch), flaproeren en hydraulische stuurmachines (voor elk roertype). Kapaciteit en afm etingen w orden aangepast aan u w eisen. • Andere scheepshydraulische apparatuur zoals: nettenrollen, lieren, winches, stuurhuisliften, masten, schroefas, generatorsets standaard stuur-units „formatie. autom atische pilo te n ^ ^ g erust v o o r m e e r i — - _A. van «/er Velden Dorpsstraat 67a / Postbus 2061,2930 AB Krimpen a/d Lek Tel.: 01807-11577, Fax: 01807-11578, Telex: 26401 intex nl Courses in: INFLATABLE LIFERAFTS, WHITTAKER CAPSULE, FIRST AID BASIC AND REFRESHER COURSES. BREATHING APPARATUS AND REFRESHER COURSES, FIRE FIGHTING, TRAINING WELL CONTROL, OFFSHORE CRANE OPERATOR, PORTABLE FIRE EXTINGUISHERS, HELICOPTER DECK CREW, RADtOTELEPHONY. LEIRO I AND III. • ALSO TAILOR MADE COURSES AND CONSULTANCY. FURTHER INFORMATION PLEASE CONTACT THE CENTRE. All courses according N.I.F.O. and NOGEPA POLICY ON SAFETY TRAINING P.O. Box 137,1780 DC Den Helder The Netherlands Tel. 02230-25070 Fax 02230-16520 Telex 57072 DOTC NL Founding Member International Association tor Sea Survival Training (I.A.S.S.T.) Office: Aberdeen (U.K.) Founding Member International Netherland Safety Training Association, Office: Haarlem (NL). VLAARDINGEN00ST SHIPREPAIR » 1 ! Your logical choice in the heart of Rotterdam for drydockings yard & port repairs anchors & chains Schiedamsedijk 2 - 3134 KK Vlaardingen-Holland P.O. Box 47 - 3130 AA Vlaardingen-Holland Tel. (010) 434 27 44 - Fax (010) 434 08 87 - Telex 22119 A l 29 VLAARDINGEN OOST SHIPREPAIR Vlaardingen O o st Shiprepair was founded in (920 as a shiprepair w orkshop in the Vulcaanhaven in Vlaardingen. Today the Yard is still located on the very same spot w here it all began, ideally situated in the centre o f the P o rt o f Rotterdam . Sailing upstream, the firs t shiprepair yard on yo u r left. O n ly 12 miles fro m the N o rth Sea. D uring its existence, Vlaardingen O o s t gradually built up its share o f the m arket, providing all kinds o f services to shipping and industry. C onversions like lengthening o f all kinds o f vessels, upgradings o f pipelaying barges and oilrigs, w e re carried o u t all in addition to the yards day to day business in the field o f ship surveys, dock ings and damage repairs. The eighties proved to be d ifficu lt years fo r shipping and her associated industries and it had also effect on Vlaardingen O ost. A fte r a long struggle, despite diversifica tio n o f activities and joints effo rts made by management and w o rk fo rc e , the yard 'slipped o ve r the edge' in the last q u arter o f 1988. Recognising h e r potential, the Damen G roup in G orinchem , le t the yard 'rise fro m her ashes', resulting in to a ’n e w ’ Vlaardingen O ost. The yard resumed op erations in D ecem ber 1988, and fro m that m om ent on, re stricting herself to the fo l low ing activities: A - Docking, repairing o f ships B- Trading, repairing and testing o f an chors, chains, etc. S h ip re p a irs This is the companies main activity. The yard is operating 3 floating docks and a sideslipway fo r ship’s upto 14.000 tons d w t. The total yard area is approx. 95.000 m2 w ith 390 m etres o f quayside, w hile the w ate rd e p th alongside is approx. 7 metres. The w aterdepth, betw een th e yard’s buoys is 13 metres. W orkshops are situ ated around the drydocks and slipway and are suitably equipped to deal w ith all kinds o f steel-, engine- and piperepairs. Quays and docks are fitte d o u t w ith cranes w ith a lifting capacity u p to 17,5 tons. The yard has ample space to store Ship o w n e rs’ spare parts, stores, etc., either stored in covered heated warehouses o r in the open air. A to ta l w o rk fo rc e o f 140 people is available in a 2-shift system on normal w eek days, w hile, if required 3rd shifts and also dayshifts during weekend and holidays can be arranged. V o ya g e and h a rb o u r re p a irs A n im p o rta n t and logical consequence of the Shipyard organization is the voyageand harbourrepair section, which is dealing w ith approx. 400 voyage repairs per year. T h e a n c h o r and chain fa c to ry This departm ent, w o rkin g as a separate di vision w ith in the yards organisation, is able to produce anchorstudlinkchain upto 105 mm diam. in U2, U3 and O .R.Q., as w ell as specialized tailorm ade hoistingappliances. There are stocks o f anchors and chains on the yards premises ensuring a p ro m p t and I3 0 _______________________________________________________________________________________ SenW 57STE jA A R G A N G N R 2 II» v la a rd in g e n o o s t s h ip re p a ir reliable replacem ent service. The A nchorand Chainfactory is equipped w ith anneal ing furnaces and testbeds approved by all major Classification Societies. Testing o f chains, anchors, ropes, shackles, hydraulic components, etc., can be done u p to 1000 tons while reconditioning o f used anchors and chains is a substantial part o f the ser vice package. T he V la a rd in g e n O o s t app ro ach W ith the purpose offering an im proved quality and m ore efficient service to th e ir customers, V laardingen-O ost is adheres to the follow ing principles: 1. Flexability a. Unlike many o th e r yards, the normal w orkingw eeks fo r the yard’s personel are extended to 4 2 '/z hours per week. The e x tra hours w orked are saved and used as ’tim e o f f during slack periods, thus ensuring a flexible system. 2. Subcontracting Although the m ajor part o f the normal w orkload can be carried o u t by th e yard’s 3 * J I l |/AMr\'o>MNO Rotterdam 1990 ow n personnel, the m anhour capacity o f Vlaardingen O o st is to the strategic minimum. D uring the busy periods skilled labour fro m outside is called in, e ith e r on basis o f ’tim e and m aterial’ o r subcontract ing’. Subcontractors are efficiently con tro lle d by th e shipyard. A ll specialised ac tivitie s like electrical w orks, cleaning, gritblasting and painting, insulationw ork, carpenter w o rk etc. are subcontracted to specialized firms, many o f w hom have th e ir o w n w orkshop/office in the yard. 3. M u ltiskill In view o f making a m ore efficient use o f the manhours available in addition to vari ous capabilities o f individual w o rke rs the yard has introduced the YnultiskiH’ co n cept. Simple and /o r supporting tasks are carried o u t by any body w ho is available on that particular mom ent. It also develops the sense o f responsibility, w hich is good fo r the m oral and m otivation o f the yard’s personnel. The rate o f ab sence caused by illness in 1989 has been the low est in many years. 1989 Looking back on 1989 one must draw the conclusion th a t Vlaardingen O o st has been doing well. The u p turn in shipping in com bination w ith the restructering o f the yard’s organiza tio n and m oreover, adding the fresh ap proach o f how to use the human resources available has led t o a Vintage' year fo r the yard. Com pared to the budget fo r 1989, the ac tual manhours sold, w e re 25% higher, w hile the to ta l tu rn -o ve r tu rned o u t to be 40% higher, all leading to a positive finan cial result. A lthough developm ents in shipping are dif ficu lt to predict, Vlaardingen O o st proves to be on the rig h t track and th e re fo re the yard's management looks in to the fu tu re in an o ptim istic and positive way. W I L T O N - F I J E N O O R D : UNIQUE COMBINATION WITH A GLORIOUS HISTORY The history o f W ilto n -F ije n o o rd is one w hich is filled w ith glory. It commences in 1823. In that year, the Etablissement Fije n o ord was founded by Gerhard M o ritz Roentgen, one o f the great entrepreneurs o f his tim e. The company targeted its ope rations both the construction o f navy and merchant ships, as w ell as activities on land. Fijenoord built w a te r w o rk facilities, sugar refineries, locom otives, roofed A m ste r dam’s C entral Station and manufactured presses fo r the dom estic and foreign market. In 18 5 1, Bartel W ilto n started a sm ithy on the Baan in Rotterdam . Most o f his w o rk consisted o f riveting w a te r tanks fo r ships, plating life boats, repairing stoves etc. G ra dually, the activities o f the company began to be concentrated on b o iler construction. If repair w o rk was scarce, new boilers w e re b uilt which finally g re w to o large fo r the sm ithy on the Baan. In 1876, the co m pany moved to the W estzeedijk along the river Maas, w here a harbor was construc ted and a slipway was b u ilt fo r carrying o u t ship repairs. Both companies p ro fite d fro m the digging o f the N e w W aterw ay, as this led to a considerable increase in shipping traffic to R otterdam . O nce again, space became a problem fo r W ilto n , which meant that new accomm o dations w ould have to be found. The choice fell on the W estkousdijk in Delfshaven. Fijenoord was a steadily g row ing business w hich had gained an e xcellent reputation as a naval shipyard. A t the end o f the last century, various p ro p e llo r steamers w e re b u ilt that all saw service in the East Indies. In addition, the yard b uilt steam canon boats, flotilla vessels, spar to rp e d o boats, G-boats, O and K submarines, and last but n o t least, the cruiser 'D e R uyter’ ( I ), that later w e n t dow n in the Java sea. B oth companies realized the sense o f jo i ning forces rather than tryin g to com pete against one another. This, in view o f the fact that W ilto n had decided to sta rt build ing engines, an area staked o u t by Fije n o ord long ago, w hile Fijenoord planned taking on repair w o rk , a specialty o f W il to n ’s. Both companies b u ilt vessels fo r both naval and merchant use. M ore over, the equipm ent o f the yards w e re e x cellent com plem ents o f one another. In 1929, the m erger betw een W ilto n and Fij enoord became a fact. The headquarters o f the new company w e re located in Schiedam. A t the tim e o f the m erger, both companies had b uilt o ve r 300 ships. H o w ever, disaster in the fo rm o f the D epres sion struck, and struck hard. The English pound plum meted. Ships w e re laid up. N e w orders tapered off. Repair w o rk con tinued to come in, but this consisted o f maintenance w o rk , on which shipowners economized as far as possible. There w ere less damage cases, due to the decrease in transport. A positive result o f the crisis was the sti mulus in the search fo r technical im prove ments in ships w ith a greater p ro p e llo r ef ficiency, providing cost-cutting benefits fo r the shipowners. These efforts w e re supported by the governm ent by means o f a m odest credit. W ilto n -F ije n o o rd was able to survive the crisis because o f the na val shipbuilding activities and by providing faster, m o re effective and inexpensive solutions in damage repair w o rk . U n fo rtu nately, W ilto n -F ije n o o rd was caught up in the second w o rld war. The yard was a fre quent target fo r bombing. Employees lost th e ir lives. H ow ever, w ith the a ttitu d e so characteristic o f W F personnel, the com pany succeeded in getting back on its feet. By 1948, the business in Schiedam was on ce again running at full capacity. D uring the fifties, there was m ore than enough w o rk fo r W F. Investments continued to be ma de. Many im provem ents w e re introduced which n o t only had a positive affect on the w o rkin g climate, but also increased effi ciency, enabling W ilto n -F ije n o o rd to w ith stand the com petition. Gargantuan e ffo rts w e re put in to virtually irretrievable w recks o f ships such as the m .t. ’Nuculana’, the ’Oranus’ and the m.s. ’E rria’. N e w orders fo r ships came in from custom ers such as the Royal Navy, the Rotterdamsche Lloyd, the KPM, the H AL and BPM (Shell). The machine factory in Schiedam also expanded during those years. Quay walls w e re repaired, the slip way im proved and extended, existing docks w e re m odified, cranes installed etc. Land was purchased in o rd e r to excavate docks 6 and 7. A random selection o f the new construction activities include the construction o f the ’Rijndam’, the 'Maasdam’, the ’D iem ersdijk’ and the whaler ’W ille m Barendsz'. W ilto n -F ije n o o rd be came the main co n tra c to r and secretary in the construction o f 32 coastal mine swee pers fo r the Royal Navy. A milestone was reached in 1954 w ith the hundredth anniversary, a date marked by an exhuberant celebration. The company in Schiedam had matured into a harm o nious, w e ll-o rd e re d industrial complex w ith a magnificent turning basin fo r the docks and a com pletely modernized lay out. In the m em oirs o f the company, the year 1956 stands o u t as the year in which a grand to ta l o f nine ships w e re completed fo r delivery. The tonnage o f the vessels continued to g ro w , and at the repair yard, develop ments w e re anticipated and repairs carried out. Names like Onassis and Livanos were heard at the yard. Ships came from far and near. R otterdam expanded at an ever-in creasing pace to finally become the w o rld ’s largest p o rt. And W ilto n -F ije n o o rd grew w ith the p o rt. In 1966, dock 8 was opened by His Royal Highness Prince Bernhard. W ilto n -F ije n o ord now had the facilities to dock ships carrying up to 160,000 d w t, and thus once again remaining ahead o f the com petition. The firs t vessel to be docked was the W Fb u ilt ship ’Diadema’. The sixties com m en ced w ith the gigantic conversion jobs on th e ’V ic to ria ’, the ’O x fo rd s h ire ’, the ’W il lem Ruys’ (n o w named ’A ch illo Lauro’) and the ’Statendam’. Huge damage repairs w e re carried o u t on, fo r example, the 'Crystal Jewel’, the ’V itre a ’, the ’M osli’, and many others. The air c ra ft c a rrie r ’Karel D o o rSenW 57STE jA A R G A N G N R 2 Ruysch Trading Holland B.V. I | PJ Ruysch Technical-Agencies Holland B.V. LEVERINGSPROGRAMMA Reserve onderdelen voor vele merken scheepsdieselmotoren, o.a.: cilmdervoeringen, cilinderdeksels, kleppen, lagers, zuigers, -veren. - 'SILION' lagermetaal. een veredeld loodbasismetaal dat dankzij unieke eigenschappen al meer dan 50 jaar een vaste plaats in de markt weet te behouden. VERTEGENWOORDIGINGEN SCHEEPSREPARATIEWERVEN GESPECIALISEERDE BEDRIJVEN Brazilië Canada Can. Eilanden Cyprus Engeland Gustav Espey KG - div. afdichtingen Hartchrom AG - vernikkelen + verchromen -slijpen M. Jürgensen KG-centrifugaal gegoten cilindervoeringen Longueville gebrs. - krukpen slijpen "in situ" Metallwerk Langenau GmbH - glijlagers Mitchell, Shackelton & Co. Ltd. - fabriceren van krukassen Nordische Stahlgiesserei - staalgietwerk tot 10 ton stuk gewicht Nordon & Cie. - Ketelbouw en pijpconstructies Nylands Marine Service AS - onderdelen scheepsdieselmotoren Gustav Pleissner - gietijzeren stukken tot 7 ton Reinosa S.A. - Smeedstalen stukken tot 90 ton - gietstalen stukken tot 100 ton von Roll AG - smeedstalen stukken tot 27 ton G.B. Scarsi - Genua - reparatie aan elektrische en elektronische installaties Senior Bigwood Ltd. - niet verspanende metaalbewerkingsmachines Filippijnen Frankrijk Griekenland Italië Japan Kameroen Madegaskar Portugal Taiwan Zweden Renave - Rio de Janero Versatile Co. - werven in Vancouver en Victoria Astican - Las Palmas Famalift - Limassol A & P Appledore (Highland Participants) werven in Aberdeen, Falmouth, Milford Haven en Tyneside Cebu Shipyard & Engineering Works - Cebu City Techni - services - Marseille Hellenic Shipyards Co, - Skaramanga O.N.I. (Officine Navali Italiane SpA)-Genua,Napels Kasado Shipyard - Kasadoshima CNIC - Douala Secren - Antsiranana Navalconsulte - Lissabon China Shipbuilding Corporation - werven in Kaohsiung en Keelung Cityvarvet AB - Göteborg POSTBUS 28, 7200 AA ZUTPHEN, TEL,: 05750-15744, FAX: 05750-15750, TËLEX: 49149 RTH NL RESCOFLAKE® Glasvlokken versterkte hoogwaardige Polyester coating. Beschermt tegen: Chemische corrosie, cavitatie, electrolitische corrosie. Repareert en is machinaal na te bewerken. RESCORAMIC® Ceramische coating v* .i v» Zeer hoge slijtvaslheid. Beschermt tegen: Chemische corrosie, electrolitische corrosie. Repareert en is door zijn hoge hardheid niet na te bewerken. O ns N ationale- en Internationale netwerk van Dealers bieden u de snelste service. resistant coatings bv T hurledew eg 115 3044 ER Rotterdam Telefoon 010-415 18 77 Telex 25099 nl Telefax 010-462 39 14 A l 33 Hertel: know-how sinds 1895 Al seder! 1895 houdt Hertel zich bezig met het leveren en monteren van isolatlesystem en en met het vervaardigen van afdichtingen en technische rubbers. Hoofdgroep Isolatie De hoofdgroep Isolatie, aanvankelijk gestart op het gebied van de scheepsbouw, is nu vrijwel met meer weg te denken in elke tak van de industrie. Hertel heeft dus een ruime ervaring met alle facetten van de isolatiebranche. Therm ische en akoestische isolatie, brandbescherm ing; Hertel w eet er alles van en dat g e ld t ook voor klimaatkamers, polyurethaan spuiten, asbestverwljderen, licht constructiew erk en brandw erende m uurdoorvoeringen. O ngeacht of het om een nieuwbouw-, renovatie- of onderhoudsproject gaat. Am sterdam , Rotterdam, M iddelburg, Echt en Kampen. De verkoopactiviteiten van deze hoofdgroep zijn te onderscheiden in: • de groep A fdichtings- en R ubbertechniek (A & R ), • de groep Dak- Voeg- en Grondwaterafdichtingssystem en (DVG). ©hertel Hertel B.V. Postbus 7115 3000 HC Rotterdam Telefoon 010-416 65 00 Telex 28611 herco nl Telefax 010 - 416 76 08 Hoofdgroep Afdichtingen De hoofdgroep A fdichtingen ontwikkelt, produceert en levert afdichtingsmaterlalen in elke gew enste vorm en hoeveelheid. De hoofdgroep A fdichtingen heeft verkoopafdelingen m et stansfaciliteiten in It'splainsailing DeltaWorkb^pjs DeltaShipyard Sliedrecht BV International W orkboat P.O. Box 51, 3360 AB Telephone 01840-16366, Fax Telex 26376, Cable: AI 34 R o tte rd a m 1990 man' underw ent full-scale reconstruction and the cruiser 'D e R uyter’ (II) was o ve r hauled. Both ships are still in service, the fo rm e r in the Argentinian Navy, the la tte r in th a t o f Peru. The frigate 'N ige ria ' was built fo r the Nigerian Navy. In 1965, the 152nd naval craft was launched at W ilto n -F ije n o o rd ! This was the submarine, the 'Potvis'. H e r sister ship, ’T o nijn’ was on the stocks. W il ton-Fijenoord has built submarines fo r cus tomers o th e r than the Royal Navy. In the past, this type o f craft was also delivered to Spain and Turkey. Besides innumerable reconstruction and conversion activities (which included the lengthening o f 7 ships fo r VNS), the co m pletion and delivery o f the 'W e s te rk e rk ', the T e xa co R otterdam ’, the 'La Q u in ta ’ and the 'La Hacienda' also to o k place d u r ing these years. W ilto n -F ije n o o rd also es tablished a reputation in the field o f o ff shore. In cooperation w ith Gusto, several n o tew o rthy projects w e re realized, including the 'Chazar', a drilling rig fo r Rus sia and the 'Spar', a vertical, floating crude storage tank. Towards the end o f the six ties, W F bu ilt the 'Pazargad', a buffer tank for crude, to g e th e r w ith RDM. Dutch shipyards came under increasing pressure fro m 'cheaper' countries, such as Japan and Korea. The call to join forces grew steadily louder, and resulted, in 1968, in the m erger o f W ilto n -F ije n o o rd w ith Rijn-Schelde. In the c o n te x t o f this m e r ger, th re e enormous, fast container ships were built fo r Sea-Land. In 1972, V erolm e became part o f Rijn-Schelde, and the b irth of Rijn-Schelde-Verolme was annouced. Although, th ro u g h o u t the seventies, m e r chant vessels continued to be b uilt by W il ton-Fijenoord, including tw o chemical tankers, it became increasingly clear th a t the D utch ship builders w ere losing the battle in the face o f the m urderous com pe tition fro m the Far East. M oreover, the consequences o f the oil crisis had seriously affected the am ount o f repair w o rk availa ble. Tankers w e re laid up; shipping compa nies liquidated. Nevertheless, W F succeeded in keeping afloat. The yard on the W estkousdijk had already been closed down. The slipway was extended and m odernized. D ock 6 SenW 57STE [A A R G A N G N R 2 was covered over. N e x t to ro u tin e w orks, the repair yard carried o u t several specta cular jobs, among others raising the depth o f tw o fe rry boats, in which the super s tru ctu re was cut along the length o f the ship and subsequently jacked up as to c re ate m ore ro o m fo r an e x tra deck. A job shipyards abroad did n o t dare to attem pt. In the offshore field, the conversion o f an o re tanker to crane ship and rebuilding a tanker in to a floating storage tank meant a significant utilization o f capacity. Naval vessel construction consisted o f three c o r vettes which w e re delivered to the Indo nesian Navy, and tw o S-frigates to the Royal Navy. Due to a num ber o f causes, the languishing Rijn-Schelde-Verolme concern declined and in 1983, the curtain fell on this ship building giant. In the past, W ilto n -F ije n o o rd had learned how to fig h t fo r survival. Again and again the company succeeded in overcom ing the odds, o f w hatever nature. The fighting spi r it and fle x ib ility o f the company, whose history goes back o ve r 160 years, again provided the basis to survive this o n slaught. Since 1984, W ilto n -F ije n o o rd has operated com pletely independently. A t that tim e, w o rk in progress constituted the o rd e r fo r construction o f tw o subma rines fo r Taiwan. The firs t submarine was launched in 1986 fo llo w in g a construction tim e o f n o t quite fo u r years, and was given the name 'Sea D ragon’. The second submarine was launched in D e cem ber 1986, a fte r a construction tim e o f slightly o v e r three-and-a-half years, and was named 'Sea T ig e r’. These construction tim es are the shortest ever to be realized in peace tim e fo r sub marines o f this class. The ’Sea D ragon’ was delivered to Taiwan in O c to b e r 1987 and the 'Sea T ig e r’ in A p ril 1988. In 1987, th re e tugs w e re delivered to In donesia, w hile the o rd e r acquired in Sep te m b e r 1986 fo r the construction o f tw o customs launches fo r Taiwan was co m p le t ed in 1988 (constr. nr. 8 I9 and 820 res pectively). D uring recent years, W ilto n -F ije n o o rd has been absorbed in a constant struggle to be able to continue th e ir new construction activities. Success seemed to be w ith in grasp w hen the navy o f Taiwan proved ea ger to place an o rd e r fo r an additional fo u r submarines. The refusal by D utch governm ent to issue an e x p o rt licence was a b lo w to the com pany's hopes in this direction. The decision was upheld when appealed against. D uring the debates in the Tweede Kamer (L o w e r C ham ber) on the e x p o rt licence fo r the delivery o f another fo u r submarines to Tai wan, various m otions w e re adopted by unanimous v o te in which alternative w o rk fo r W ilto n -F ije n o o rd was urged. The D utch governm ent, however, and the ma jo rity o f the Tweede Kamer subm itted to the decision. A fte r a second application fo r an e x p o rt licence fo r the delivery o f fo u r additional submarines to Taiwan was tu r ned dow n by the D utch governm ent, it be came evident that, fo r the tim e being, there was no prospect o f any new con stru ctio n w o rk fo r the yard. Hence, most o f the activities in this sector w ere te rm i nated at the beginning o f 1988, w ith all the consequences that this entailed fo r the personnel. Even now , when W ilto n -F ije n o o rd ’s main activities are focussed on the maintenance and repair and conversion and reconstruc tio n o f merchant ships, offshore equip ment, naval vessels and yachts, the yard continues the e ffo rt to a ttra c t new build ing orders. A fte r all, the knowledge and experience are still available. A cquisition e fforts are d irected chiefly in the m arket fo r large p atrol launches. The decision o f the D utch governm ent, In contrast to o th e r (W est) European go vernments, n o t to make use o f the possibi lity offered by Sixth D ire ctive o f the Council o f the European C om m unities to grant p ro duction support fo r ship recon stru ctio n w o rk , has rendered this section o f the m arket virtually inaccessible to D utch repair yards. O n e xp iry o f this Sixth D ire ctive in 1990 and w ith a view to the unification o f Euro pe in 1992, W ilto n -F ije n o o rd anticipates that the financial aid to the European yards w ill be b rought o n to one line, o r even e li minated altogether. This w ould mean an end to the c u rre n t unequal co m pe titive si tuation, and w ould especially open up the m arket fo r the conversion and reconstruc tio n o f merchant vessels to D utch repair yards. O nly then w ill it be possible fo r W ilto n Fijenoord to com pete w ith o th e r Europe an yards on an equal footing. The skill, knowledge and experience, acquired th ro u g h o u t the years, w ill certainly w o rk in W ilto n -F ije n o o rd ’s favor in this struggle. The fu rth e r expansion and g ro w th o f the p o rt o f R otterdam may provide an addi tional boost. W ilto n -F ije n o o rd remains a unique com bi nation w ith a glorious history. I 35 Rotterdam 1990 SHELL TANKERS B.V. Shell Tankers B.V. in R otterdam has man aged the D utch ocean going Shell Tanker fleet since 19 12. A t present, Shell Tankers B.V. is responsi ble fo r 20 vessels w ith a to ta l cargo capaci ty o f o ve r I m illion tons. Both the manning o f the ships and th e ir operational and technical management are coordinated fro m the shore office o f Shell Tankers B.V. in R otterdam -A lexanderpolder. A ll com m ercial planning, which inclu des entering into ch a rte r agreements and determ ining the routes, is carried o u t by Shell International Marine Ltd. in London, which functions as the central organ to coordinate all sea tra n s p o rt o f o il and oil products, as w ell as gas and coal fo r the Royal/Shell G roup. The to ta l num ber o f ships c o n tro lle d by the Royal/Shell G roup, know n as the socalled key fleet, adds up to around fifty ves sels variously managed by Shell Tankers B.V. in Rotterdam , Shell Tankers U.K. in G reat Britain, Deutsche Shell Tanker Ge- sellschaft in Germany and Société M aritiem e Shell in France. In addition. Shell International Marine Ltd. also charters betw een fifty to sixty ships fro m th ird parties, which means th a t a to ta l o f o ve r a hundred tankers are afloat fo r the Royal/Shell G roup, w ith a collective cargo capacity o f over ten m illion tons. In principle, as the ships are n o t k e p t to fixed routes, they can be sent th roughout the e ntire w o rld . In practice, this means that the ships managed by Shell Tankers B.V. dock only sporadically at D utch po rts and that th e ir crews are usually relieved som ewhere abroad. Because o f the in te r national character o f Royal/Shell G roup m aritim e operations and the w ide range o f bareboat and o th e r charter agreements, a num ber o f vessels managed by Shell Tan kers B.V. sail under D utch flag, while others sail under Liberian flag. The ships are manned by D utch officers and ships engineers and Indonesian mates and - on a fe w ships - Indonesian ju n io r officers. T h roughout the history o f Shell Tankers B.V. it has become a tra dition , to sail w ith Indonesian crews. A s m a ll piece o f h is to ry A lthough the 'Royal', o r the Royal Compa ny fo r the E xploitation o f P etroleum Wells in the D u tch Indies, founded in 1890, bought its firs t o il tanker in 1897 and ow ned six ships by the year 1900, and al though the Netherlands Indies Tank Ste amboat Company was founded in 1904 for the inter-island traffic in the D utch Indies, 19 12 has been recognised as the official founding year fo r Shell Tankers B.V. In 1907, the 'Royal' entered in to a jo in t ven tu re w ith the Shell Transport and Trading Company. This amalgamation was expres sed in the share ra tio 'Royal': 60 and Shell Transport and Trading: 40. This signified the b irth o f w hat has since been know n as: Royal/Shell. Then, in 19 12 the N .V. P etroleum Maat schappij 'La C orona’ (the crow n ) was foun ded fo r handling the sea tran spo rt o f oil and oil products, a company which actually became the fo re ru nner o f w hat was later to be called Shell Tankers B.V. Subse quently in I9 I7 , the N.V. Curacaosche Scheepvaart Maatschappij (CSM) was founded in the W est. Despite the crisis w hich lasted throug hout the decade o f the thirties, the use o f oil products started t o gain popularity, as a re sult o f which the fleets o f the Royal/Shell Group w e re gradually expanded. During the second w o rld war, merchant shipping and the tankers o f the Royal/Shell G roup played an im p o rta n t role. Many seamen lost th e ir lives and the num ber o f vessels lost was huge. The perform ance o f the Shell fle e t contributed greatly to the libe ration o f all occupied te rrito rie s . A lthough this is n o t the place fo r a detailed list o f the exploits o f the fleet, how ever, m ention must be made o f the brave fig h t o f the La C orona tanker 'O ndina' and the B ritish-lndian mine sw eeper 'Bengal' against tw o Ja panese auxiliary cruise ships in 1942, du ring which one o f the Japanese ships was sunk and the 'Ondina', although h it by a to rp e d o and on fire, was able to be saved by the surviving crew members. In m em o ry o f Captain W . Horsman, w ho was killed during this sea battle, a num ber o f streets as w ell as a life boat o f the K N Z H R M have been named in his honour. T w o La C orona tankers also saw service during the second w o rld w ar as Merchant A irc ra ft C arriers (M A C ), to which end they w e re equipped w ith a flight deck and five Swordfish aircraft to com bat submari nes. These M A C ships also carried th e ir norm al cargo o f oil during the convoy jo u r neys! A fte r the second w o rld war, a period of reconstruction and econom ic revival be- T h e fu tu re gan in the Netherlands. Before the war, the D utch tanker fle e t o f Royal/Shell con sisted o f 94 vessels. W a rtim e losses had re duced this number to 66. D uring the fifties, the fle e t was gradually expanded and m o dernized. In 1959, Shell Tankers N .V. (la te r B.V.), in which La Corona, the N IT and the CSM w e re incorporated, was established as the o w n e r o f the D utch Shell fleet. D uring the sixties and seventies, larger and larger ships continued to be b u ilt and inno vations w e re introduced in the crew ing of the vessels. Shell Tankers was the first D utch shipping company to introduce the integrated ship's mate, w ho was able to w o rk both on deck and in the engine room . In 1975, the P roject Lange A dem (PLA, 'Perseverance P roject’) was launched in which ways to achieve a fu r th e r reduction o f ship’s personnel w e re studied, as w ell as fu rth e r integration be tw een the various services and ranks. The outcom e o f this was a new kind o f officer, the Semi-Integrated O ffice r (SIO) w ho holds both a nautical and engineering d i ploma. The nautical schools have ke p t pace w ith this pro je ct and have re structured the nau tical/technical course programs, which in 1989, led to the graduation o f the firs t I 36 SenW 57STE JA A R G A N G N R 2 polyvalent trained group o f M aritim e O ffi cers. The oil crises in 1973 and 1979 forced Shell Tankers B.V. to consider h o w to realise a m ore economical responsible manage m ent in o rd e r to be able to by means of, among o th e r things, fu rth e r cutbacks in costs and m ore efficient crew ing, continue to operate com petitively. W ith in a period o f approxim ately 15 years both the fleet and the num ber o f employees w ere strongly reduced in number, until in 1989 th e fle e t remained stable at around 20 ships w ith a to ta l o f approxim ately 700 employees. D uring the eighties, Shell Tankers B.V. was confronted w ith m ounting tensions in the Arabian Golf. In the face o f these risks, how ever, the seamen o f the Shell Tankers ships stayed on the job. This expression o f com m itm ent and loyalty - w ith o u t gla m our, w ith o u t ribbons - is an extension o f the tra ditio n, which had been founded ear lier by the ’O ndina’. SenW 57S ÎE JA A R G A N G N R 2 W ith a view to operate on an economical responsible basis, it is necessary to keep the costs, especially o f personnel, com pe titive . T o this end, the standard maintained by Shell Tankers B.V. is that o f a com para ble W estern European shipping company, as cost levels in Asia are n o t feasible fo r Europe in the sh ort o r medium term . Shell Tankers has directed its e ffo rts tow ards achieving safety and prom otin g an environ mental consciousness in th e ir operations as w ell as delivering high-quality c a rrie r ser vices. For this purpose, it is vital that Shell Tankers B.V. can continue to have com mand o f the m aritim e expertise it re quires, among others in the fo rm o f w elltrained D utch M aritim e O fficers and Ships' Technicians. Hence each year, Shell Tankers B.V. has 30 to 35 training openings fo r students in the H igher Nautical Education, so th a t the in flux o f new officers to the m erchant fleet and the m aritim e stru ctu re (harbors, p i lots, forw arding etc.) o f the N etherlands can be retained. M oreover, in technical management aboard, developm ents such as process autom ation, com puterization and data comm unications per satallite are being investigated daily and introduced where possible. In this way, Shell Tankers B.V. is confident th a t w ith w ell-trained employees, w e w ill be able to approach and e nter the nineties in an economical responsible fashion, thereby em broidering on an old tradition, a tra d itio n on its way to an even m ore prosperous future. I 37 Twenty-four hours a day, seven days a week, we take care of your fire-safety Man rijn S pecialized in fire -e x tin g u is h in g - and safe ty e q u ip m e n t fo r m a ritim e use. A ll b rands ava ilable. F.reextmjuwhmq sat«» equipment S tric k le d e w e g 23, 3 1 2 5 A T S chiedam te le p h o n e 0 1 0 -4 6 2 6 0 7 7 , te le fa x 0 1 0 -4 6 2 5 7 5 4 telex 2 2 6 8 6 tb r ijn nl te le g ra m R ijnm ayda y R o tte rd a m . ■ « ■ ■ ■ I 1 h ÿvV ,»'y , j CRANJI=WI=m= Oranjewerl ScheepsreparaHe bv as a long established shiprepairyard, did indeed meet the changing requirements in the shiprepair industry. A compact organization and a highly qualified, flexible staff provide reliable and on time services, 24 hours a day. Facilities include a floating dock, slipway, repair berths with ample crane capacity and fully equipped workshops O R A N JE W E R F shiprepair» O ranjew erf is experienced in maintenance, general repairs, conversions, lengthening, damage repairs to hull and machinery o f: - O ffshore supply vessels - Seismographic research vessels - (Anchor-handling) Tugs - Coasters Reelers *- Tankers - Barges - Dredgers - fishing vessels O ranjew erf is specialised in quick repairs at short notice. O R A N JE W E R F engineering work» O ra njew erl engineering w o rks it specialised in construction-, machining- and engine w orks fo r shipbuilding, ship repairs, offshore and heavy industry. M odem equipm ent enables O ranjew erf to carry out all sorts o f machining- and engtnework. O ran|e w crf is also dealer of lis ie r/F e tte r and Mitsubishi diesel engines. Services A t all berths, drydock and slipway: - Electricity (all c urrent types) - Ftrc mains connection - Fresh water - Baflastwatcr - Coolingwater - Compressed air The yard has its ow n facilities fo r the collection o f bilgewater and slobs, according to IM O regulations, in: A fully equipped w orkboat is available fo r harbour repairs. Transportfacilities - Mobile cranes - Forklifl-trucks - Lorr ies A tugboat and barges are available fo r yards' transport. Sub con tracto rs Main subcontractors i.e. for electrical repairs, tankcfcaning, gritblasting and painting have th eir ow n facilities on the yards' premises. All major suppliers o f marine equipm ent have a servicepoint in the Netherlands and experi enced staff and spare p a rti are available at short notice. Oranjewerf Scheepsreparafie bv - PO Box 2711 3 - 1002 AC Amsterdam Holland -The Netherlands Telephone (0)20-34 75 11 - Telefax (0)20-34 75 33 - Telex 13209 ORAM NL gespecialiseerd in goederentransport, zee- en binnenvaartcasco, -ry landm aterieel, { — * ~yT7 /w pleziervaar- J ' M / yjjQVESW tuigen, •• B PVESW enz. VESW iVESW VESW •VESW A l 38 ^ K ic c \ ,\ i Vereniging van Experts op Scheeps- en W erktuigkundig gebied in Nederland Postbus 8 4 2 9 0 0 AB Capelle a /d IJssel Tel. 0 1 0 - 4 5 1 4 6 5 4 Tfx. 0 1 0 - 4 5 0 8 4 6 1 (a tt. ph) Aangesloten bureau’s op aanvraag VAN OMMEREN: ALREADY ACTIVELY INVOLVED IN ROTTERDAM'S MARITIME HISTORY FOR 150 YEARS Geared for the multi-purpose bulkcarrier market Not many Rotterdam shipping companies will share the 650-year history o f the city for a longer period than Van Ommeren, which has its head office in this port since its foundation in 1839. As a deepsea shipowner the company nowadays has three specialisms: product tankers with Soflumar Van Ommeren France, heavy lift shipping via Dock Express Shipping, and multi-purpose bulk shipping. This company-portrait describes the last activity, which is carried out under the name Van Ommeren Shipping* ). It is also the main activity in d ry cargo ship ping, if we don’t include heavy lift shipping. Van O m m eren Shipping is specialized in the m ulti-purpose bulk trade. This means specialization across a broad spectrum o f cargo types, ranging fro m neo-bulk homogenous breakbulk goods - and con tainers, to dry m inor and m ajor bulk com modities. The la tte r types mainly involve goods which require special handling. In order to be able to operate the fleet across this e ntire range, the o w n ships and the m ost im p o rta n t charters are m u lti purpose, which at Van O m m eren means: geared, box-shaped/open hatch, and a 35to 45,000 to n deadweight, thus handysized. Ingredients which are essential to Van O m m e re n ’s philisophy: optim al fle x i bility in the market. Van O m m eren Ship ping has n o t re gre tted this choice to date. Because o f this specialization, Van O m m e ren Shipping, w ith its head office in R o tte r dam is today know n as a d ry bulk ship owner. This does n ot real ly do justice to its history, because the company was one o f Holland’s largest tanker companies not th irty years ago, w ith 240,000 tons dead weight in tankers at the beginning o f '61, against 230,000 tons o f d ry tonnage, in cluding the firs t (five) bulkcarriers. Ten years before that, the tankers w ith 154,000 tons made up 71 percent o f the fleet, which also included freighters char tered to liner companies. Except fo r coastel navigation and a participation in a con sortium, the company has never offered liner services itself. I). Van Ommeren’s first bulkcarriers were the 16,000-dwt 'Holendrecht’ and its four sisterships (’58/'60). T ra d e m a rk Van O m m eren’s firs t steps in bulk shipping date back to 1955, w ith an o rd e r fo r five specific b ulkca rrie rs1* o f 16,000 tons. This type was developed at the beginning o f the *) A t the end of 1987, the parent company Phs. van Ommeren N V became Van Ommeren Ceteco NV (VO C), Rotterdam w ith three divi sions: trade, tankstorage and transport. VO C employs 8850 people throughout 160 offices in 45 countries. In 1988 the group’s turnover was over US$ 1,0 billion. SenW 57STE JA A R G A N G N R 2 1). The 42,000-dwt 'Duivendrecht' (’66) 1950’s when the tram p ships still looked a lo t like liners, w ith tw eendeck and ow n gear. The obvious advantages o f the bulk carrier: no bulkheads, the engine ro o m and accomm odation at the poop and increase o f scale, resulted in Van O m m e re n o rd e r ing the five ships, tw o o f them w ith W ilto n Fijenoord. The ships w e re delivered be tw een ’58 and ’60. Increase o f scale fo l low ed th re e years later w ith the o rde r, in D unkerk, o f three 42,000 tonners2*, the size w hich later w ould be named handysized, and w ould become Van O m m eren's tradem ark. Panamax bulkcarriers w e re in troduced to the fle e t betw een ’73 and '75 w ith the 68,000 tonners ’Z w ijn d re c h t’, 139 DENO COMPRESSORS HOLLAND Van D u ijv e n d ijk e n O v e rb e e k c o m p re s s o re n O p h e m e rts tra a t 9 8 ,3 0 8 9 JE R o tte rd a m Tel. (+31 10) 4 2 9 3 9 5 5, T e le fa x (+31 10) 4 2 9 8 7 35, T ele x 2 8 6 0 d e n o n l We are m anufacturers of a complete com pressor programme: Starting- and working air compressors from 3 up to 400 m3/H, with a presure from 7 up to 35 bar According the classifacation societies LR, ABS, BV, GL, etc. > MARINE C O M P R E S S O R T E C H N O LO G Y numeriek centrum ISO BARGE g ro nin g en bv m - Computer service voor de scheepsbouw/jachtbouw IN D U S T R IË L E S E R V IC E O R G A N IS A T IE B V Schoonmaak en slob services Available around the clock Stolwi|kstraat 51 - 3079 ON Rotterdam P.O. Box 91187 - 3007 MD Rotterdam The Netherlands Telephone : (+31-101-4799 444 Fax : (+ 3 1 -10J-4833 000 Telex : 20196 sisonl After office hours: (+31-10) 454 9911 • • • • • Stroken van lijnenplannen Huidplaatuitslagen Numerieke- en optische brandsnijgegevens 1:1 spantenvloeren Softwareontwikkelingen • Levering van software voor: - Engineering - Produktie • Levering van hardware voor: - Multi-user systemen - Werkstations - Randapparatuur • Training en opleiding Fax: 050-423717 Tel: 050-412632 Postbus: 204 Sigma Coatings - een wereldwijde organisatie De scheepvaartindustrie is konstant in beweging en scheepsverven spelen hierin een belangrijke rol. waarbij vakkennis, kwaliteit in innovatie onontbeerlijk is. En geen bedrijf is zo efficiënt als Sigma Coatings als het gaat om deze disciplines. Met meer dan 251) jaar ervaring kunnen we gerust stellen dat Sigma Coatings de nieuwste en beste oplossing in buis heeft voor al uwcoating problemen, tegen welke weersomstandigheden dan ook. Met meer dan 50 vestigingen is Sigma Coatings over de hele wereld vertegenwoordigd met konstante kwaliteit en service. S IG M A COATINGS A140 Sigma Coatings B.V.. Parmentierplein 13. 3088 GN Rotterdam. The Netherlands Tel. 10-4299700. fax 10-4294612 R o tte rd a m 1990 3). The 1974-built Panamax-bulkcarrier 'Sliedrecht'. 4). Roots o f today's succesful multi-purpose concept, the ’Kieldrecht’ ('7 7127,000-dwt). ’Scherpendrecht’, and ’S liedrecht'3), o r dered fro m N K K in Japan. These w ould re main Van O m m eren's largest bulkcarriers. In the same year that the th ird Panamax was delivered, the single m ost im p o rta n t developm ent fo r the company’s later specialization follow ed: the o rd e r fo r tw o geared 2 7,000-dw t bulkcarriers4^ also from N K K . These became the ro o ts o f the current position in m ulti-purpose bulk shipping. The m otive fo r choosing these tw o ships, delivered in ’77, was to become established in various sectors o f the mar ket, thus becoming less vulnerable to com petition. A flexible approach had become the main philosophy. Van O m m eren Ship ping did n o t w ant to go along w ith scale increases because o f the unsuitability o f ships beyond Panamax to react to the short te rm m arket and the drain on capital. The same applied to the tankers, fo r both V LC C ’s and U L C C ’s as w ell as sophisti cated produ ct tankers. Following the transfer o f a num ber o f tankers to the French organization (Soflumar), the Dutch Van O m m eren fle e t had become a pre dominantly d ry one by the end o f the 1960’s. O w n gear The tw o 28,000 tonners o rd ered in ’75 were suitable fo r sailing the G re a t Lakes and carried steel to the autom obile indus tries and grain back to Europe, at a tim e when larger bulkcarriers frequently bal lasted to th e ir loading area. Equipped w ith lashing eyes, th e tw o K-drechts could also transport lum ber on deck. C o n ta in e r fit tings came next, fo llo w ing the purchase in '78 o f a 33,000-dw t box-shaped bulkcar rier, built by Verolm e, whose o w n e r had gone bunkrupt. In spite o f the p o o r m arket at th a t tim e. Van O m m eren realized the possibilities o f this som ewhat m ore fle x ible type o f ship. Due to successful exploi5). The 44,500-dwt ’M o o r d re c h tone o f a series o f three ('78). SenW 57STE IA A R G A N G N R 2 141 6). 41,000-dwt 'W ieldrecht' and its two sisterships were delivered by Götavaerken in 1982. tation, they w ere quickly proven c o rre c t and had now really become in favour o f the MP principle. Also in *78, seven 44,500 tonners w e re com pleted by G ötaverken in Sweden which had built them on specula tio n because o f the deplorable shipbuilding m arket. A fte r a m arket survey, the ship yard had reached the conclusion (as V O had done) that the best b e t was still the geared, open hatch, handy-sized ships. F urtherm ore, because o f a large bale space in relation to the carrying capacity, the se ven ships w e re very suitable fo r light grain. The depression becomes exem plified by the fact that Van O m m e re n managed to buy three o f these 'C olum bus' ships (con tainers/lum ber/bulk) fo r half o f the con stru ction cost. The ö ste rre ich isch e r Lloyd also bought one and entrusted its com mercial management to Van O m m eren. In spite o f the depression, the 'M eerdrecht', 'M ijd recht', and ’M o o rd re c h t’5*, especially favoured by container lines, hardly made any ballast trips, and in 1990 they still sail in the fleet. S to w a g e s kills in s ty le again H ow ever, in o rd e r to operate these ships properly, the chartering departm ent had to be expanded and adapted, because it was suddenly being confro n te d w ith many sectors o f the m arket, even th a t o f knocked-dow n houses. M arketing had become a very labourintensive task, compared w ith the m arket fo r d ry bulk cargoes which in itself is heterogenous. And, on board, one’s skills in p ro p e r stow ing could be practiced again. N o t long after the purchase in '78 o f the three M -drechts, the m arket began to pick up again, due to the gro w in g emphasis on the transfer to coal firin g in addition to strikes in the Polish coal industry. This rapidly resulted in an enorm ous conges tio n in the Am erican coal ports, w here at 142 7). The latest extension o f Van Ommeren's fleet o f geared, handysized and box-shaped bulkcarriers, the ’88-built 42,000-dwt ’Dor drecht’ (pictured) and its sistership ’Duivendrecht’, delivered early 1990. one point 12,5 m illion tons o f deadweight w e re anchored. It is obvious that this had a positive effect on the fre ig h t market, in 1980 the ne xt step was taken to w a rd s a considerable expansion o f the fle e t o f conbulkers, starting w ith the purchase o f the tw o -ye a r-o ld 36,000 tonners ’Loosd re c h t’, bringing the to ta l num ber o f geared MP carriers to seven. Because this was n o t considered sufficient fo r an o p ti mal position in the m arket, three 4 1,000 to n ships w e re o rdered, based on the e x perience w ith the th re e M-drecht-vessels. The new type's key features w ere: im proved container capacity, heavier cranes, large box-shaped holds and p ro p e r ballast conditions in o rd e r to maintain sufficient draught during voyages w ith (e.g.) em pty containers. Because Van O m m eren e x pected a lo t o f w o rk in oil and gas produc tio n and ore-m ining in Canada’s A rc tic re gion, the ships also w e re ice strengthened. The ships w e re o rd ered fro m G otavaerken, which had also b uilt the M -drechts tw o years earlier, and w e re delivered in '82 as the ’W a a rd re ch t’, 'W ie ld re c h t’6*, and W o e n s d re c h t’. In 1984 Van O m m e ren was entrusted the com m ercial man agement o f a similar ship. In v o lv e m e n t re m a in s th e k e y w o rd In 1990, Van O m m eren Shipping operates a fle e t o f about 20 ow ned and chartered bulkcarriers, m ost o f them handy-sized and geared and to a large e x te n t open hatch o r box shaped type. The philosophy o f a fle x ible approach to many sectors o f the bulk m arket still stands firm . Asked about the fu tu re plans, the company states that it considers kn o w -h o w and in volvem ent in stowage and transshipment to be strategic activities, and wants to keep on manifesting itself in this way. ’Both as tim e -c h a rte re r and co n tra ct carrier. W e also keep on the lo o k o u t fo r new de velopments, bulk comm odities, w e t or dry, sh o rt and long te rm and especially if they have specific requirem ents. Because that is o u r specialty, w h e th e r it concerns e x tra clean holds o r loading and unloading by ship’s ow n grabs.’ The com m odities car ried range fro m fo re st products - logs, bundles, pulp, etc. - and steel products beams, rolls, o r pipes - to d ry bulk goods and containers fo r liner companies. In o r der to be able to p ro p e rly cover these di verse sectors o f the m arket, fo r tram p and long-term fixtures, Van O m m ere n’s char te rin g departm ent in R otterdam is assisted by a num ber o f specialized brokers. This w ide field o f activity offers a great o p p o r tu n ity to plan com bination trips, w ith the result th a t fe w ships sail in ballast. A nother consequence o f Van O m m eren’s reputa tio n on the m ulti-purpose bulk m arket is the m onthly steel service, w hich fo r a number o f years now is being carried out betw een A n tw e rp and the Am erican East Coast. A fte r unloading this demanding car go in the US, Van O m m eren's vessels, both ow ned and tim e-chartered, often load conventional bulk. F le e t e xpa nsion The latest additions to the fle e t have not been included in the above summary, tw o 42,0 0 0 -d w t sophisticated conbulkers71. They w e re purchased virtually on the slip way and w e re chartered im mediately upon delivery at the end o f ’88 and the beginning o f ’90 to the original c o n tra cto r, Transportacion M aritim a Mexicana. The D utch flag ged ships are fully managed by Van O m m e ren and w ill continue sailing as the ’Oaxaca’ and the ’M onterrey* fo r the n e xt few years. SenW 57STE [A A R G A N G NR 2 R o tte rd a m 1990 From soils to steam and diesel Fig. I. The ’Gertrude’, Van Ommeren’s first steamship. In spite o f a fe w w artim e losses, the fleet had increased to 18 ships by 19 18, includ ing the firs t diesel vessel, the 2,000-dw t tanker 'P e n d rech t* in 1916, Having been active in tram p shipping only until then, Van O m m eren was one o f the founding partners, in 1920, o f the Vereenigde Nederlandsche Scheepvaartmaatschappij (VNS), w ith the KNSM, SMN, KPM, and JCJL as Am sterdam partners, and the H AL, Rotterdamsche Lloyd, Van N ievelt Goudriaan, and Van O m m eren as R otterdam partners. W hen the Nederlandse Scheep vaart Unie (N S U ), the predecessor o f N edlloyd, replaced the VNS in 1969, Van The almost 15 1-year history o f the com pany dates back to May 1839 w hen Philippus Van O m m eren established himself as a shipagent. His father did n o t w ant to ac cept him as partner in the business. This fact cost him the agency fo r the regular service betw een R otterdam and London, that g o t his son’s company on its way. W hen the connection betw een R o tte r dam and the sea, then quite a deto u r, was frozen, Van O m m eren re n t Scheveningen fishing vessels to ship D utch dairy products to England. The husbandry o f the managing shareholder, o f the brig ’M inerva' in 1855, was Philippus’ firs t step in shipowning. Be tween I860 and 1870, Van O m m eren gradually increased the sailing fle e t and be came a medium-sized shipping company w ith about 2,600 ton deadweight. The ships ranged fro m about 200 to n to 670 tons. This period d id n 't last very long. By 1873 the company had already abandoned shipowning and was again com pletely con centrating on the agency business. H o w e v er, steamers w e re becoming m ore popular and in 1878 a 394 to n steam er2, m ore than 20 years old, w ith an 85 hp engine was bought. The ship’s w re c k in 1880 con cluded the second shipowning episode and it w ould take eleven years before things were started up again, fo r the th ird and last time. Although some R otterdam shipping com panies had overreached themselves w ith large ships (2,000 tons), Van O m m eren decided to build a 2,800 tonner. It was prim arily intended fo r the lum ber trade from the Baltic Sea to the N etherlands and started sailing in 1891 as the 'D o rd re c h t'2, a gesture tow ards th e ir m ost im p o rta n t client, a lum ber im p o rte r located in that city. The tra d itio n th a t all D utch Van O m meren ships, to date, are named a fte r a 'D re ch t' city, originates here, as w ell as the funnel m ark (see illustration). W ith the 'D o rd re c h t', Van O m m eren made his comeback in shipping. In 1899, tw o 3,700 tonners w e re ordered, tram pers. The firs t tanker, a 2,700 to n n e r b u ilt in 1882 fo r the molasses trade betw een O m m e re n sold its shares to the new group. In the firs t half o f the 19 30’s, the French Tanker Company Soflumar - in w hich nowadays all tanker interests are consolidated - g o t w ell underway thanks to the many refineries appearing along the French coast. T ransportation o f wine from N o rth A frica to France was also exploited, firs t w ith a renovated ship and later w ith one b u ilt by the RDM in 1949, both regis te re d as 'Bacchus’... The shipping company also expanded in tanker shipping in the N etherlands and had SenW 57STE IA A R G A N G NR 2 Fig. 2. The 'Drecht’-naming tradition started with the ’Dordrecht’ (1891). Fig. 3. The ss ’M ijdrecht’ (1912/4,600 dwt), the first newly built tanker. Cuba and England was acquired in 1907, preceded a year earlier by a sea-going 1,140-dwt (p etroleum ) tanklighter. The firs t tanker orders, w ith the RDM, w e re fo r tw o 4,600 tonners delivered in 19 123 and 1913. The 1,600 to n coastal tanker 'Gallia', b uilt by the Gebr. Pot fo llo w e d a year later as Van O m m e re n ’s firs t m o to r vessel, albeit w ith an incandescent main en gine. The company’s seagoing fleet at the beginning o f the firs t W o rld W a r consisted o f five dry cargo ships, th re e tankers, and th re e tanklighters. 143 een näam op het gebied van de aandrijftechniek. • drukvaste en slagwaterdichte elektromotoren, febr. FELTEN & GUILLEAUME • spilkontakten, kabeltrommels en eindschakelaars, desgewenst explosievast, febr. STEMMANN TECHNIK • keerkoppelingen, boegschroefkasten, lieraandrijvingen en transmissies, fabr. ASUG Landré Aandrijftechniek BV een partner die u op voorsprong zet. DESIGNING SPECIAL SHIPS ? LEAVE IT TO US ! rtk—— dredgers naval architects split barges marine engineers tugs consultants cargo vessels draftsmen fishery vessels estimators tankers vuyk engineering Vuyl(Engineering P .O .B O X Telephone 010 - 4502500 1 T p lp fa x 2900 AA CAPELLE A.D. IJSSEL 010 - Telex 23528 vuyk nl ELECTROTECHNIEK VOOR SCHEEPVAART EN INDUSTRIE « NACHT • 7 óa9011 ^ V d a g ■ .’ nieuwbouw - reparatie onderhoud ö VOGELENZANG DE JONG E L E C T R O T E C H N IE K Be' 01807 Parallelweg 13 - 2921 LE Krimpen a/d IJssel Telefoon 01807-14244, Telefax 01807-11871 HOUTTUIN POMPEN B. V. Sophialaan 4 3542 AR Utrecht P.O. box 76 3500 AB Utrecht Tel. : 030 - 44 96 11 Telex: 47280 Fax. : 030 - 43 61 14 Engineered pompen. 'toegespitst' op uw toepassing 24 uur service m.b.t. reparaties Preventieve onderhoudsmogelijkheden Professionele organisatie Scheepsbouw en industrie A l 44 R o tte rd a m 1990 Fig. 4. Diesel entered the fe e t with the tanker ’Pendrecht’ o f I 9 I 6. eight tankers by 1936 - the m arket had just had to cope w ith a considerable crisis — w ith a to ta l o f 74,000 tons deadweight. This was the company’s fleet, plus a ship still under construction w ith the RDM, when W o rld W a r II began. There w e re no dry cargo ships anymore, except fo r a few participations. For its redevelopm ent the fleet which was reduced to fo u r ships be cause o f w a r damages, had to rely on con fiscated tonnage and a ’Liberty ’ ship (one o f the 2850 that had been b uilt) and tw o T2 tankers, o f which the Americans had built 525. There was hardly any ship-yard capa city. The company only managed to place an o rd e r, w ith the RDM, by the end o f 1946 fo r a 7 7 0 0 -d w t parcel tanker. T w o years later a 17,000 tons tanker was o r dered fro m W ilto n Fijenoord, a 16,000 to n n e r under construction in Sweden was bought and a liner vessel was o rd e re d at Sunderland. S hortly a fte r the w a r d ry car go shipping was mainly an activity o f Van O m m eren's English shipping company which o rd ered six ships fo r chartering to liner companies. These w ere ships o f ap proxim ately 12,000 tons, all w ith Beacon names, like the only tanker o f the English branch, the 32,000-dtw 'C helw ood Beacon’, o rd ered w ith the RDM. The 'supertanker' made its appearance, firs t via the management o f fo u r American 38.000 tonners, and in 1961 w ith the o rd e r placed w ith W ilto n Fijenoord fo r the 54.000 to n A v e d re ch t’5. A t the beginning o f 1961, tankers still held the m ajority in the V O -fle e t, w ith 240,000 tons dead w eight against the 230,000 tons d ry to n nage. But this w o u ld change rapidly in the years to come. Van O m m eren by 19 6 1 al ready had its firs t bulkcarriers (five 16,000 tonners). D ry bulk shipping was to be fully concentrated on, as w ill be described in detail in the accompanying main article. Tanker shipping became m ore and m ore difficult, and a 16,000 to n n e r was con ve rte d in to a bulkcarrier already in 1959. In the sixties, three tankers w e re transfer red to the French shipping company, which could e x p lo it them on the national m arket and tanker shipping under the D utch flag ended w ith the sale o f the 54,000-dw t ’A v e d re c h t’ in 1976. Fig. 5. 54,000 dwt ’Avedrecht’. SenW 57STE jA A R G A N G N R 2 145 R o tte rd a m FROM BOTTOMRY TO SHIP’S MORTGAGES T hroughout the centuries, the 650 yearold city o f R otterdam has been an im p o r tant center fo r shipping and shipbuilding. And, th rough out all these years, in addition to the construction and purchase o f ships, the financing th e re o f has been o f decisive im portance. If, in the firs t centuries o f R o t terdam ’s existence, rich merchants acted as financiers, and B o tto m ry was ’the Moneyloan fo r which the Lender runs the risk from the Sea’, as the loan agreement w ith ’security o r m ortgage on the ship' was called, at the end o f the nineteenth century shipbuilders, shipowners and in surers fe lt the need fo r ship financing, which resulted in the foundation o f a num ber o f financing institutions. The b o tto m ry w ith mortgage had mean while become a money loan w ith a m o rt gage on a ship. It goes w ith o u t saying th a t a number o f these financing institutions w e re estab lished in o r around R otterdam , as was the case w ith the Nederlandsche Scheeps-Hypotheekbank N.V. (1899), the N.V. Eerste Nederlandsche Scheepsverband Maats chappij (1899) and the N.V. R o tte rdamsche Scheepshypotheekbank ( 19 12). These th ree banks form ed the basis o f w h at is now the Nederlandse Scheepshy potheekbank N V, o r the Nedship Bank, the name under which the bank n ow p re sents itself. situation in the m aritim e sector, are in volved to a greater o r lesser e x te n t in ship financing. Traditionally, the th re e banks mentioned above w e re involved in the financing o f D utch barges, coasters and fishing ships, b o th new and second-hand. Later, the financing o f W est-European barges, and, operating as a syndicate, small seaships, was also undertaken. A t the beginning o f th e seventies, when the construction o f new ships in the Netherlands and o th e r w estern European countries started to decline in the face o f the co m p e titio n fro m the yards in the Far East and because o f the over-capacity in virtually every sector o f the shipping indus 1990 isting loan p o rtfo lio demanded the Bank's full attention. try, the Bank focused its activities on financing second-hand vessels. The closest, m ost interesting m arket was Greece. There, the Bank found so many suitable clients, and its m ethod o f operation was such a success, that a fte r only a fe w years, in 1979 it became necessary to open an of fice in Piraeos. A ro u n d that same tim e, a successful a tte m p t was made to gain a fo o th o ld in the w estern hemisphere. The Bank now also has an office in N e w York. O ne final wish, to set up an office in the Far East, an equally im p o rta n t shipping center, was unable to be fulfilled. The longest, w o rs t shipping crisis o f this century began to make itself fe lt and m o nitoring the ex Via the offices abroad, but also through the activities o f the R otterdam head office in the m a jo rity o f w estern European coun tries, the loan p o rtfo lio g re w from DFL. 337 m illion in 1968 during the m erger, to over a billion guilders today. The percen tage o f loans fo r seaships also increased strongly. These seaships, no longer only the familiar coaster, but also deep sea ves sels carrying up to 70,000 dw t. as w ell as almost any o th e r type o f vessel. Ships equipped fo r carrying special cargos, bulk carriers o r vessels equipped to carry o ff shore materials - all w ere represented in the loan p o rtfo lio . The financial results kept pace w ith the grow th o f the p o rtfo lio , even during the eighties, w hen the w o rld was tum bled into an economic recession. A t that tim e, the oc the be to N aturally, this a ttitu d e did n o t im prove when the crisis also struck in the shipping industry, a crisis sparked by the economic recession, to o much subsidy from govern ments fo r the shipbuilding and shipping in dustry, and a far to o generous loan policy on the part o f the banks. The payment be haviour o f the shipowners g re w steadily w orse as a result. In o rd e r to be able to cope w ith this situation and to secure the acquisition o f funds, the Bank fe lt the need fo r a strong partner. A t the beginning o f 1986, negotiations w ith the Rabobank w e re brought to a satisfactory close, w ith the Rabobank making an o ffer fo r ail the shares o f the Bank, an o ffe r so generous that nearly all the shareholders w e re w il ling to sell. The support o f this financial bank, made it possible to , during the last years o f the crisis, when w o rld w id e yard capacity de creased by o ve r 40% and the prices o f ships plum m eted to a fo u rth o f the values o f 1982, purge problem loans and also to grant new loans. A fte r the p o o r financial results in 1985 and 1986, the turning o f the tide in the shipping industry meant an im provem ent in p ro fit figures. As freights w e re once again back up to levels at which investments in a ship paid themselves back and the value o f a ship was close to the scrap value, much a tte ntion was paid to the p roduction o f loans. The loan p o rtfo lio showed a considerable g ro w th , which was also due to the fact that m ost o f the Bank’s co m p e tito rs had failed to survive the dam age o f the past years. The subsequent sharp rise in prices o f ships - a bulk carrier carry ing 65,000 d w t b u ilt in 19 8 1 fo r $ 27 m il lion was w o rth DFL 6 m illion in 1986 and is cu rre n tly w o rth $ 18 m illion - once again made ships objects w o rth y o f investment. N e w financing form s fo r both risk-bearing capital and otherw ise made th e ir e n try in to the m aritim e w orld. Nedship Bank celebrated its 90th birthday in 1989 and after w eathering the ups and downs o f the past nine decades is, at p re sent, financially stronger and b e tte r equip ped fo r its task than ever before. The 1989 production, which amounted to DFL 700 m illion and the yearend loan p o rtfo lio total amounting to approx. DFL 1.5 billion, are new records. They are tangible evidence that the Bank - still fast, professional and independently operating, even a fte r the Rabobank Nederland takeover — has be come m ore interesting as far as rates and volum e are concerned, t o shipowners and shipowning companies. In the firs t half o f this century, a num ber o f banks fo r ships mortgages disappeared o r w e n t bankrupt as a result o f wars, the crisis o f the thirties, o r takeovers, so th a t after the second w o rld war, only fo u r banks w ere left. The cooperation betw een the three banks m entioned above led, in 1968, to a m erger, resulting in the founding o f the Scheepshypotheekbank Nederland N .V., which later, in 1977 became the Nederlandse Scheepshypotheekbank N V. The concentration o f these activities was to ta l in 1970 when the Sappemeer-based N V Veenkoloniale Bank v o o r H ypotheek en Scheepsverband was taken over, a fte r which th e re remained only one bank in the N etherlands which was exclusively active in granting loans fo r floating objects. O th e r unique institutions o f this kind the re are comparable organizations in var ious countries, w holly o r partially g o ve rn m ent-ow ned which w e re set up as a chan nel fo r governm ent contributions - can only be found in W e s t Germany. This, how ever, does n o t w a rra n t the conclusion that there is no co m p e titio n in this field, as both in the N etherlands and abroad, nearly all the m erchant banks, depending on the 146 firs t difficulties fo r the Bank started to cur, when, alarmed by the problems o f home mortgage banks, the financiers came re tice n t about granting loans specialized institutions. A ll financing products, im p o rta n t to ship yard and shipowner, are offered by the Bank: mortgage loans o f up to 60% , and in the case o f good service, up to 75% o f the value o f the ship, mezzanine loans, the o f ten hard to finance part betw een m o rt gage loan and risk-bearing capital, and the participation in the latterm entioned cap ital. Nedship Bank sends R otterdam its very best wishes fo r her 650th birthday, and hopes fo r fu rth e r developm ent and g ro w th thro ug its operations in and fro m this city, which has such significance fo r the m aritim e w o rld , to the benefit o f national and international shipowners and yards. SenW 57STE IA A R G A N G N R 2 SenW 57STE IA A R G A N G N R 2 147 C R O O N ELEKTROTECHNIEK B.V. - ROTTERDAM A PIECE OF HISTORY Five years a fte r R otterdam had obtained its open fairway to the N o rth Sea, a tug boat accompanied three luggers in five hours fro m A m sterdam to th a t same sea. These w e re the firs t vessels to use the brand new N o rth Sea Canal, in the year 1876. That same year, an enterprising employee fro m the Rijkstelegraphie (State Telegrap hic company) founded a new company. His name: Bernardus Hermanus C ro o n . He called his company 'C ro o n & Co., Electrische Schellenmakers’. The company w o rke d at first only w ith weak cu rre n t, but activities w e re soon e x panded. C ro o n & C o. w e re the first in the Netherlands to , in Am sterdam , 'achieve electric lighting by means o f dynamo ma chines’ - arc lamps fro m Jablochkoff and lo com obile driven dynamos fro m Siemens. The firs t o rd e r in the field o f ships installa tions was obtained far before 1900. It started w ith a magnetic spark-gap te le graph installation on board H. M. 'Ramrnon ito r Reiner Claessen’, fo llo w e d by the com plete installation o f the tug boat 'C e res’ fo r the G ebr. G oedkoop. O n May I 1894, the R otterdam branch o f C ro o n & Co., was opened. This was the result o f the fact that the o ffice r w ith p o w ers o f representation o f C ro o n & Co. A m sterdam had directed the starting-up ope rations o f a p o w e r plant in the city on the Maas. In 1908, the agency fo r the Siemens Schuck e rt W e rk e was acquired. This lasted up to 1919, w hen Siemens established an inde pendent branch in R otterdam . Meanwhile, the installations o f various ships had been carried out, such as, fo r example, a ship fo r Vinke & Co. at V uijk & Zonen in Capelle a/d Ijssel; length 100 m, price ƒ 4.750.00. From 1911 to 1926, C ro o n & C o carried o u t installation w o rk on approxim ately 100 vessels; at firs t steamships, b u t later an increasingly larger num ber o f m o to r ves sels equipm ent w ith far m ore extensive electrical installations. Installations w ere com pleted fo r seven to rp e d o boats fo r the Royal Navy, and a floating dock fo r the Navy yard in Surabaja, to o . In 1932, the o rd e r fo r the cruiser 'D e R u ijte r’ was acquired fro m the Royal Navy, which was the com pany’s largest o rd e r up to that tim e ever obtained. In 1936, electrical systems w e re installed fo r J. and K. Sm it in tw o dredgers, the ’A r gentinië M op 2 18 ’ and '2 19 ’. 148 Many ships, tankers and freighters fo llo w ed fo r W ilto n -F ije n o o rd , De R otterdam sche D ro o g d o k maatschappij, Gebr. Pot, KPM, etc. D uring the second half o f the thirties, C ro o n , to g e th e r w ith many o th e r com pa nies, w e n t through a period o f economic recession, b u t managed to get back on its feet. The marble used fo r c irc u it panels as an ac ceptable material fo r construction and in sulation, was replaced by panels o f sheet steel. Porcelain and bakelite no w also became construction materials. The shipbuilding industry started to revive, and requests came in fo r renovation w o rk on the D utch Fleet, such as the ’O ra n je ’, 'N ie u w A m sterdam ', 'W ille m Ruijs’ and new construction w o rk fo r the KPM. A n o rd e r fro m RDM fo r several Shell tan kers was obtained w hich w ould yield ƒ 2 1,900.00 per vessel. In the meantime, C ro o n threatened to burst the seams o f the building at the Leuvehaven, and the need fo r a new location became m ore end m ore urgent. O n March I 1940, th e move was made to the new and very m odern business loca tio n and offices on the Schiemond O Z , at nr. 22. A t the same tim e, the C C O logo/ emblem (fo r C ro o n & C o) was developed. Then came the disaster o f the second w o rld w ar and the misery which this w ro u g h t. C ro o n , to o , was affected. Thanks to the o rd e r acquired just before the w a r broke out, fo r the electrical instal lation o f the C hem istry laboratory o f the Technical U niversity in D e lft no personnel was laid off, and the wages could be paid. These continued to be paid th ro u g h o u t the war. A fte r the liberation in 1945, altough the co u n try was in a desolate state, b u t its people w e re not. T h e ir s p irit was u n b ro ken, and everyone was needed fo r the re construction o f the land. C onstructing the installations was no problem , but it was dif ficu lt to find the materials required. The prospects fo r b oth shore and ship in stallations w e re good. O ne o f the first commissions was th a t o f the so-called d e gaussing installation o f the Waalhaven in Rotterdam . This installation, set up like some s o rt o f strange-looking gate re n d e r ed ships anti-magnetic which p ro te cte d them fro m magnetic mines. The w a r was over, but th e re w e re still many mines around; the installation which had been fed by tw o diesel locom otives no w had to be connected to the mains supply. O n 10 may 1950, exactly 10 years after the sta rt the war. C ro o n was once again w o rk ing on the installation fo r a cruiser, to be b u ilt by W ilto n -F ije n o o rd . The plans had been draw n up before the war, based on 220 d ire c t voltage, but executed w ith 440 v o lt ro ta ry current. The conversion o f an a ircraft carrie r to ’Karel D o orm an’ was also an enormous task. C ro o n continued to g ro w , and so did the ships departm ent. Reefers, tankers, coas ters, freight-passenger ships etc. were among the company’s achievements. To m ention a few; ’Rijndam’ (Holland America Line), ’Minjak’ (KPM), ’Scherpendrecht’ (Van O m m eren), ’Makkassar’, etc. Once again, C ro o n was confronted w ith the problem o f a lack o f space. The ’large’ and 'm odern' on the Schiemond O Z had become cramped. The accounting depart m ent and several o th e r departments moved to a building on the Schiehaven. The fo rm e r W ilto n office building on the W estkousdijk was also ’taken o ve r’. Following on the almost endless list o f ves sels installed by C ro o n , also a t the Bremen-Vulcan yard, the company acquired its firs t o rd e r fo r a drilling platform . This was the ’R.I.G. 14’, constructed by W ilto n Fijenoord. The expression ’off-shore’ was then still relatively new to us. F or the firs t tim e, sales o f the ’C roon g ro u p ’ which included the subsidiaries, ex ceded D fl 100 million. A t the same time, plans w e re made to build a new office building w ith behind it, a new factory, next to the existing locationi. In 1974, the new facilities w e re opened and taken in to ope ration. T h e p a s t 15 years. C ro o n , just as Rotterdam , continues to g ro w . The ships departm ent is now called ships/offshore and handles many ship and offshore projects. Ship repairs are starting to fo rm a m ajor sales com ponent, some times accounting fo r up to 50% o r more. The offshore m arket is determ ined m ore o r less by the oil prices, yet C ro o n still sometimes receives large orders in this area. SenW 57STE jA A R G A N G N R 2 R o tte rd a m 1990 WIJ LEVEREN EN INSTALLEEREN ELECTRISCHE INSTALLATIES VA N ELKEN O M V A N G ------------------------ ■ ■ H M. TORPEDOJAGER ■ „PIET HEIN" ■ ----- WIJ INSTALLEERDEN 7 TORPEDOJAGERS VOOR DE KONINKLIJKE NEDERL. MARINE INCL. LEVERING DER TURBODYNAMO'S, DIESELDYNAMO'S, MOTOREN ENZ. BENEVENS DE TORPEDO AFVUUR-INRICHTING, N .V . R O T T E R D A M S C H E E LE C T R IC IT E IT S M AA TS C H A P PIJ V /H . H. C R O O N & Co. L E U V E H A V E N 181 . TELEFOON 2 7 0 8 0 -1 -2 . ROTTERDAM TELEFOONS EN VERDERE ZWAKSTROOM-INSTALLATIES C roon has changed its name fro m ’BV R otterdamsche Electriciteits-Maatschappij v/h H. C ro o n en C o .’ to ’C ro o n Electrotechniek BV’. The C C O logo has remained un changed. There has been a decline in the num ber o f ship projects, but this has been compensat ed by the offshore projects. The C o n naught bridge in London is being installed fo r Hollandia w hile semi-submersible plat form s are also on the o rd e r list. C ro o n continues to steadily acquire orders. W e are engaged in the installation o f six landing cra ft fo r the Royal navy, several ’m ultipurpose vessels’ fo r Van der Giesen- de N o o rd , w hile bridges (Railroad bridge O ude Maas D o rd re c h t) and locks yield in creasingly m ore w o rk . The offshore m ar ke t is also starting to im prove, and m ore and m ore ships are being built. R otterdam , as the w o rld ’s largest p o rt, acts as a magnet w hich attracts new activities and develop ments in this field. SCHIP es WERF M.O.T. SCHIP & WERF is een praktijkgericht technisch vaktijd schrift voor leidinggevenden, constructeurs en deskundigen op het gebied van de maritieme en offshoretechniek, georganiseerd in de Nederlandse Vereniging van Technici op Scheepvaartgebied. Het Maritiem Research Instituut Nederland MARIN, De Vereniging Nederlandse Scheepsbouw Industrie VNSI en de Afdeling maritieme Techniek van het Klvl. Voor inlichtingen en/of het reserveren van advertentieruimte kunt U kontakt opnemen met Uitgeveri j Wyt en Zonen, Advertentie afdeling M.O.T. Schip & Werf, tel. OIO - 476 25 66 SenW 5 7ST E |A A RG A N G N R 2 I49 12E VAKBEURS V O O R INDUSTRIËLE PRODUKTIE TEC H NI EK EN -— 1 , Navigatie Kommumkatie? - * TecmuShow'90 DE WEG NAAR EEN STERKERE CONCURRENTIEPOSITIE Een betere positie in Europa en in eigen land. Techni-Show '90 opent nieuwe wegen. De belangrijkste vakbeurs voor de metaal-, kunststofverwerkende en houtbewerkingsindustrie. U it jaar groter dan ooit Veel nieuws op Techni-Show '90! Innovatie, CAD/CAM-systemen, CNC-gereedschapswerktuigen, flexibele produktie-automatisering, robotica, CIM, high-tech, computergestuurde technieken en kwaliteitsbeheersing. Een wereld van techniek overzichtelijk bijeen, ingedeeld naar sector. N ie u w e contacten leggen M aak tijdens de beurs kennis met de nieuwste technieken, machines, gereedschappen, toebe horen en materiolen. 'n Perfecte kans voor nieuwe contacten. 19 t/m 24 maart Openingstijden: maandag t/m vrijdag 10.00-18.00 uur, zaterdag 9.00-15.00 uur. M e e r informatie: Koninklijke Nederlandse Jaarbeurs Postbus 8500,3503 RM Utrecht. Telefoon 030 - 955 911, fax 030 - 940 379, telex 47132, viditel 313 616. u INAweet er alles van Dat mag ook wel na 35 jaar lang alle ontwikkelingen op het gebied van navigatie, kommunikatie, radar en plaatsbepaling op de voet te hebben gevolgd. De techniek heeft grote stappen genomen, die hebben geleid tot uiterst verfijnde apparatuur voor gebruik op het water, het land en in de lucht. Gerenommeerde fabrikanten hebben de vindingen verder uitgewerkt, waardoor een grote variëteit is ontstaan, waarin voor elk type schip en vliegtuig gespecialiseerde apparatuur voorhanden is. INA is de vertegenwoordiger van veel toonaangevende ondernemingen. Levert alle gewenste apparatuur, zorgt voor plaatsing en onderhoud en levert elke service die verlangd wordt in binnen- en buitenland. Daarom beschikt INA ook over een uitstekend georganiseerd team van ervaren, door de fabrieken opgeleide technici ten dienste van de gehele scheepvaartwereld, overheid en gebrui kers van land-mobiele radio. JAARBEURS UTRECHT/HOLLAND INTERNATIONALE NAVIGATIE APPARATEN BV Wijnhaven 42, Postbus 1590 3000 BN Rotterdam. Telefoon 010-4330711. A l 50 ELECTRONICS IN SHIPPING AND TRAFFIC MONITORING '" i J 0TA»L0l>l0SS«0 VOOR UWNlïlGAnt EN COMMUNICATE w m m m A monitoring panel o f a barge with equip ment presented during Europort '89. In the shipping industry, one area which has been characterized by a period o f tu rb u lent developm ent is the field o f elec tronics. T hroughout the past fo u rty years we have witnessed the discovery o f inven tion a fte r m odern invention, which has kept electronic applications in shipping both sophisticated and up to date. In 1945, the D E C C A N avigator, de veloped during the w ar and used at the landing in N orm andy fo r the firs t tim e, be came available fo r comm ercial ends. Since that tim e, the system has been e x panded up to fo u rty D E C C A chains all over the w o rld . V irtua lly every vessel sail ing in w estern European waters is equip ped w ith a D E C C A navigator; fo r piloting deep-drafted ships in, fo r example, the Eurogeul, this equipm ent is essential. In 1950, an exp erim ent involving the use o f radar on a boat belonging to the R o tte r dam p o rt authorities, to examine w h e th e r it w ould be possible to p ilo t sea ships to a buoy o r quay w ith tugs equipped w ith Senw 57STE Ja a r g a n g n r 2 short-range radar, was still under discus sion. Today, the riv e r radar is part o f the standard equipm ent o f inland shipping ves sels. The newest developm ent in this area, the rasterscan daylight radar, was in tro duced in N o ve m b e r 1988. A t present, the en tire R otterdam shorebased radar has been replaced and adapted to the Traffic m o n ito rin g system. IN A is responsible, in cooperation w ith ’Signaal’, fo r the full maintenance o f this. A highly sophisticated tra ffic m o n ito rin g system is used in the p o rt areas which prom otes safety to an im p o rta n t degree. Ships, to o , which thanks to , among o th e r things, m odern electronic instrum ents are able to sail w ith increasingly less crew , must m eet high standards w ith regard to the equipm ent on board. In 1967, IN A installed the firs t autom atic p ilo t on an inland shipping vessel (’Shell’). Today, barges o f o ver 3000 tons can obtain a certificate fo r one-man co n tro l if the ship, among o th e r things, is equipped w ith radar, autom atic p ilo t and VHF radio. T h roughout all sectors o f the shipping in d ustry IN A supervised and supported these w h irlw in d developm ents in the elec tronics field. A 24-hour service organiza tio n in eleven D utch po rts provides tech nical support and installation w o rk . D uring the nineties, IN A w ill also spearhead the developm ent o f satellite communications, satellite navigation and integrated systems. A n example o f this is the new fishery re search vessel to be delivered by shipyard ’D e M e rw e d e ’ in January. The new T r idens’ has been com pletely equipped by IN A w ith A rp a radars, adaptive auto pilot, satellite com m unication and navigation and a SIMRAD scientific sonic depth finding system. 151 HVCOM oilhydrauiics cylinders powerunits systems Hycom B. V ., Postbus 1079 7301 BH APELDO ORN, telefoon 055-55 87 78, fax 055-55 40 52 Pool®-anchors MULDER MARINE-TRADING&ENGINEERING * high holding power - standard (type N + TW®) - fully balanced (type N + TW®) * super high holding power - standard (type TW®) - fully balanced (type TW®) ' special naval monobow - (type KM) anchor * design and (pre)fabrication of anchor pockets * supply of chains, castanchors, winches and buoys ★ V O LVO PENTA agent Pool® KM n ill Pool® N P | ,j, Pool® TW® PI il l ★ diesel engines and parts ★ outboards ★ inflatable boats *• m arine/offshore equip m ent tktU M (ABS, BV, DNV, GL, LRS, RINA, SI, UNITAS, UdSSR) Marine Equipment Holland bv Spangesekade 1 1 4 - 3 0 2 7 GT ROTTERDAM Phone: + 3 1 1 0 - 4 3 7 9 4 9 3 , Telex: 2 0 0 1 0 PMS Telecopier: + 3 1 1 0 - 4 6 2 0 2 4 4 H E I N E N * OPM AN ENGINEERING Polakweg 15 2288 GG Rijswijk The Netherlands Telephone (0) 70-99 76 91 Telefax (0) 70-95 42 32 Telex 30205 MEN NL Pool* is the registered trademark of Man ne Equipment Holland bv ALWAYS IN FRONT • Specialists in the field of central heating, airconditioning and • Already several hundreds of ships equipped with our installations. Reference-list on request. • Sea-water cooled and aircooled marine airconditioning units in stock ventilation on board of ships BV • Acomplete quotation for all kinds of installations in every ship on your desk within a few days of quicker, if desired • Oil fired boilers & exhaust gas boilers with energy saving systems. P.O. BO X 9 - S P A K E N B U R G - H O L L A N D - P h o n e (0 3 4 9 9 ) 8 3 0 1 4 Telex 79101 - T e le fa x (0 3 4 9 9 ) 8 70 78 AI 52 OLD EXPERIENCE WITH N EW FACILITIES & VAN DUYVENDIJK SHIPREPAIR YARD AND ENGINEERING SERVICE ROTTERDAM HOLLAND Van D uyvendijk shipyard is located in the centre o f the p o rt o f R otterdam , on the seaward side o f the bridges and is w ell known in R otterdam since m ore than 75 years. W o rk is carried o u t alongside tw o repair quays w ith fo u r cranes and in w ell equip ped w orkshops fo r machining, fittin g and steel construction. Five floating docks are available and tw o are suitable fo r drydocking vessels up to 110 m eters in length, and w ith a lifting capacity up to 6000 tons. O u r P o rt Voyage Repair Division speciali ses in general repairs on board any type and size o f vessel. Van Duyvendijk also has the fo llo w in g site facilities available: SenW 57STE IA A R G A N G N R 2 - LIPS p ro p e lle r repair w o rksh o p fo r any type o f p ro p e lle r repair 24 hours a day, every classification; - reconditioning and regasketing o f plate heat-exchangers; - Blasting, painting and oilcleaning; - W e ll equiped repair machine shop fo r marine components as rudders, w in ches, pump and others auxilliaries; - and manufacturing designing o f the w ell know n Deno Marine Compressors w ith a capacity fro m 3 to 400 m 3/h by 35 bar under the classification LR, ABS, GL, BV; o u r Marine C om pressor Technology. SCHIEDAM P E R M IS H O O G V L IE T 153 Rotterdam N INTXKllfKE StlfflEPSAGDni 1 Ti I WKZNVVïKK BV, SHIPS THAT PASS IN THE NIGHT A significant share o f Rotterdam's shipping industry was founded by families; famous names which represent a long tradition o f shipping and international trade. Hudig, Ruys, Mees and many others have, for generations, been building up the reputation for which Rotterdam is renowned. Senior citizens o f the city could tell fascinating stories o f those who are part o f the history o f the largest harbour in the world. One o f these w e ll-kn o w n names is D irkzw ager, a family which played its ow n particular part in the developm ent o f p o rt activities. It was March, 1872, and G ijsbert D irkzw ager, at the request o f his shipping friends in Rotterdam , sent them a simple message w hen he observed a ship passing through the ’Maassluise G a t’, the connecti on betw een the Brielse and N e w Maas r i vers. Initially, his only means was w o rd o f m outh, but as the technology o f com m uni cation became m ore advanced, he used his ow n Bell telephone set, w ith d ire c t lines betw een H o o k o f Holland and Maassluis, as w ell as d ire c t connection to Rotterdam. From the m om ent that the open fairway fro m H o o k o f Holland to R otterdam now know n as the N e w W a te rw a y - was established, giving the P o rt o f R otterdam open access to the sea, D irkzw ager has re p o rte d the passage o f incoming and o u t going ships. The m ost m odern system available in 1890 had been acquired - the d ire c t telephone line. M ore lines w e re established, and w hen the firs t w ooden telephone sets came on the m arket fro m the U nited States, D irkzw ag er was among those w ho hooked up the fu turistic device to his lines. N o t until years later was the firs t m odest n e tw o rk installed in Am sterdam , and D irkzw a g e r’s progressive spirit brought him, on several occasions, into conflict w ith the postal authorities and telegraph services. Satisfactory solutions w e re al ways found, and now , D irkzw ager acts as a branch office o f the governm ent telegraph services and as distribution office fo r te le grams betw een p o rt and ship. C om m uni cation is maintained by a d ire c t Line w ith the coastal station o f Scheveningen Radio. Ready fo r a c tio n W h enever a ship enters the N e w W a te r way betw een the breakw aters at H o o k o f Holland, the re p o rtin g system o f the Royal Shipping Agency o f D irkzw a g e r at Maas sluis is triggered. A t the Inform ation C en tre , telephones ring and telexes ra ttle to in form R otterdam that one o f the th o u sands o f ships which traverse the N e w W a te rw a y annually, has entered. In 1987, this was a to ta l o f 34,000 ships - an average o f 90 per day. Simplified. D irkzw a g e r’s system consists o f an observation post at H o o k o f Holland which registers the name and o th e r cha racteristics o f every incoming sea-going vessel. These particulars are passed on to the Inform ation C e n tre at Maassluis which, in turn, sends them to all parties having an 154 interest in the ship’s arrival. A m ong the firs t to be inform ed are the shipping agents and operational services such as the P ort A u th o rity , the H arbour C o -ordination C entre, the tow age company and the boatsmen w h o have to m o o r the ship, as w ell as the ch a rte re r and the ship’s chandler. The num ber o f parties wanting inform a tio n can be considerable, because a ship is n o t unlike a floating village in term s o f sup plies. Tim e is an essential fa cto r - delays are costly. Inform ation supply is an im p o r tant aspect o f this procedure, and one which has been adapted to the spectacular g ro w th o f th e R otterdam P ort. It sounds, like the proverbial grapevine, re latively simple and uncomplicated, but is in reality quite com plex, as the relevant in form ation on 34,000 ships per year must be conveyed d ire ctly - w ith o u t e rr o r o r omission - to a great number o f people. M oreover, shipping is a branch o f industry that cannot be confined to exact tim e schedules; to the hour, the day o r even a specific week. The laws o f nature, those which rule the high seas, are beyond o u r co n tro l; the notorious w e ste rly winds on the N o rth Sea can jeopardize the coast, forcing pilots to w a it until a sto rm has blow n itself o u t before they can safely bo ard ship. That is w hy the w o rklo a d during a 24 hour period is seldom evenly d istrib u ted and the technical installations have to be geared to handle peak loads. O ne hun dred percent re liability o f inform ation is essential to D irkzw a g e r in o rd e r to effi ciently co-o rd in a te everything fro m ship to shore. individuals and firm s w hich have applied fo r the inform ation service, are kept up-to-da te by telephone o r the public te le x net w o rk. A p a rt fro m shipping intelligence, D irkzw a ger also supplies services to shipping based on comm unications techniques and in fo r mation. As a branch office o f the G overn m ent Telegraph Services, all ra dio-tele grams betw een the various harbour servi ces o r shipping agents and ships at sea are dealt w ith . The company maintains direct co n tro l w ith Scheveningen Radio viaaspe- cial telephone line. As m ore and m ore ships are equiped w ith a T .O .R . (te lex over radio) installation, te le x messages are re placing telegram messages w ith increasing frequency. D irkzw ager also arranges the boarding o f pilots by helicopter. M am m oth tankers w ith a draft o f o ver 57 fe e t need th e professional guidance o f a pi lo t w h ere th e Euro-channel begins, some 20 miles o ff the coast o f W alcheren. KLM o r Airspeed helicopters carry the pilots to th e ship. D irkzw age r coordinates these ac tiv itie s fro m th e ir Maassluis office by te le phone, mariphone, te le x o r w hatever means are required. Since the depth o f the Euro-Channel has recently been increased to 72 feet (and expect to be increased to 74 fe e t in th e near fu ture) pilotage by heli copters has become increasingly im p o r T h e c o m m u n ic a tio n s n e tw o rk The original telephone lines fro m the H o o k to R otterdam have become part o f history. In co-operation w ith the P o rt A u th o rity and the postal Services, an infra stru ctu re has been developed which is tuned to D irkzw a g e r’s m odern and de manding task. V iew ed fro m the company’s Inform ation C entre, the set-up o f the ope rational te le x n e tw o rk is as simple as it is effective. A closed c irc u it n e tw o rk , covering the w hole o f the Rhine Delta, has been esta blished in the p o rt area. The P o rt A u th o ri ty, the D ic to ra te General o f Shipping A f fairs, the P ilote Service and all o th e r p o rt services such as the boatsmen and tugs, which have to be inform ed o f the ships' ar rivals, are linked to this system. Those o u t side o f the com plex coordination o f ship ping movements, shipping agents, charte rers, ship’s chandlers and numerous o th e r tf90 tant, making it possible fo r governm ent p i lots to be b rou ght on board V L C C ’s o ff C herbourg in the English Channel - all operations being co-ordinated fro m D irkzw a g e r’s office in Maassluis. T h e v a n ta g e p o in t The com pany’s Inform ation C entre, loca ted in a new ly built office block in Maas sluis, overlooks the impressive N e w W a terw a y and the industrial area beyond. Tens o f telex machines and a num ber o f com pu ter systems are neatly and e ffi ciently arranged: one group fo r incoming inform ation, another fo r outgoing in fo r m ation to be distributed on the closed c ir cuit n e tw o rk , and an additional group o f machines w hich are interconnected to be the public n e tw o rk. A central group o f w ell-trained and highly qualified experts c o n tro l this inform ation, w hich needs to be appendaged to a message before it is conveyed to subscriber. Besides the T.O.R. set, the d ire c t telephone line to Scheveningen Radio, the unit w ith the heli co p te r service co-ordination installation and the sizeable filing system, even m ore equipm ent is available fo r a myriad o f mis cellaneous functions. It is a restless w o rld ; many machines in ceaseless operation, day and night, registe ring inform ation. Nonetheless, it is re la ti vely quiet, as the new prin tin g techniques o f the te le x machines have low-noise ope rating levels. The m ost noticeable activity is th a t o f the office staff itself, as fragments o f telephone conversations and the muted staccato o f the te le p rin te rs combine to create an industrious atmosphere. In this organized com m otion and clatter, the em ployees know the precise position o f each vessel in the p o rt area, to which b erth she is heading, and w h e th e r there are any spe cial instructions o r messages fo r her cap tain o r p ilo t and w ho ever else should be inform ed. This centre o f throbbing activity provides inform ation fo r every relevant contact in the P o rt o f R otterdam - it func tions as a ’c ro w ’s nest’ fo r the busiest har bour in the w o rld. A p a rt fro m the operational aspects o f D irkzw ager's inform ation centre, the company also acts as an adm inistrative b o dy, advancing legally required G o ve rn m ent pilotage Dues and disbursements in the w h ole o f the Rijnmond area on behalf o f the P o rt o f Rotterdam . Besides the 24hour service provided by the company, there is also a small, specialized d e p a rt m ent to deal w ith agency w o rk , such as customs clearance and o th e r legal docu m entation. This departm ent also deals w ith a container groupage service by lo rry on behalf o f th e ir Britisch business rela tions. As o u te r p o rt agent, D irkzw a ger is in a position to fulfil the requirem ents o f SenW 5 7 S T E IA A R G A N G N R 2 S enW 57STE jA A R G A N G N R 2 R otterdam shipping agents and to provide assistance w here necessary. G u id in g lig h t T o many, it may be a veritable challenge to find a way through the com plex and te e m ing activity o f an international harbour, finding, in the diversity o f options available, w here to go and how to go about it. The best place to look is, perhaps, in D irk z w a g e r’s Guide to the N e w W ate rw a y, o f which the 108th edition was published in 1990. This small and practical b o o kle t is the source o f inform ation on communica tions, the rules and regulations, tariffs, etc. applicable w ith in the P ort o f R otterdam . It also contains small maps o f the new W a te rw a y area fro m the N o rth Sea to R ot terdam. D irkzw agers's Coastal p ilo t Service, P.E., a subsidiary o f Royal Shipagency D irkzw a ger, was founded shortly a fter the Second W o rld W ar. A t th e outset, assistance was requested o f re tire d masters familar w ith the traffic lanes; a precarious undertaking because o f the many existing minefields at the time. H ow ever, as p ostw ar shipping in creased, so did the demand fo r expe rienced N o rth Sea pilots, and this became an alternative full-tim e fo r numerous young captains in early re tire m e n t. O fficial recognition follow ed some years later by the issue o f p ilo t licences, c o n tro lle d by the governm ents o f those countries whose shores share the English channel and the N o rth Sea. The International M aritim e Organization recommends the service o f these qualified pilots, even though nonqua lified pilots o ffe r th e ir services as N o rth Sea pilots at m ore com petitive rates. H o m e safe A t present, D irkzw a ger employs 28 licenced pilots and maintains pilotage con tracts w ith numerous large shipping com panies. T h ro u h t the daily N otices to M ari ners', the company's pilots are ke p t fully up-to-date on all changes in buoyage, lights and communications channels. T h e ir eve ryday presence in this active trading area is a guarantee fo r navigational safety, w ith o u t unnecessary loss o f tim e. The hum o f the harbour - the invisible currents o f com m unication th a t e le ctrify the air from ship to shore, converge in the Inform ation C e n tre o f D irkzw ager. W ith its far-reach ing view and constant vigilance, no m a tte r h o w late the h our o r h o w storm y the sea, even ships th a t pass in the night w ill n o t pass unheard. T h e F u tu re It is D irkzw a g e r’s aim to maintain, o r bet te r still, to im prove th e ir service provided by extending and constantly m odernizing th e ir autom atization and com m unication technics. 155 NIEUWSBERICHTEN-NEWS Nieuwe uitgaven New Issues T IT L E , L L O Y D ’S P O R T S O F T H E W O R L D 1990 E d ito r, Paul J. C u n y IS B N I 85044 251 7 O v e r 16.000 changes have been made in th e latest editio n and a fu rth e r 104 po rts introduced, bringing the to ta l to o ve r 3.000 p o rts w orldw id e . But fro m the eighth edition o f this m ost comprehensive overview o f po rts w o rld w id e , 37 entries have been deleted, due to the loss o f com m ercial activity at certain ports. It is being recognised that ports, using all the modern methods o f transportation, ship, road, rail, interm odal, m ultim odal, etc. are d ire ctly linked to the w o rld and, m ore im portant, to the people o f the w orld. For these reasons, amongst others, many people, public and private alike, have regenerated considerable interest in ports and the services th a t they can offer. In this c o n te x t ’Lloyd's ports o f the W o rld ’ is re comm ended as a very suitable vehicle to both advertise yo u r p o rt’s a ttrib u te s and at the same tim e provide the inform ation th a t these people seek. Published by: Lloyd’s o f London Press Ltd. Sheepen Place, C olchester, Essex C 0 3 L P U nited Kingdom J. M. V. T IT L E , L L O Y D 'S N A U T IC A L Y E A R B O O K 1990 E d ito r, H a r r y A rn o ld IS B N I 85044 250 9 This p re m ie r m aritim e reference book continues to develop as an essential annual review o f the shipping industry. As w ell as i t ’s regular reference sections, the 1990 Ê NEDERLANDSE VERENIGING ., VANTECHNICI OP SCHEEPVAARTGEBIED (Netherlands Society of Marine Technologists) V E R E N IG IN G S N IE U W S door Algem een secretaris J. M. Veltman T ita n ic - O ’C o n n o r-IM A R E do. 29 m rt. R otterdam E k o fis k -V o lk e r S te v in V o o rlo p ig p ro g ra m m a van lezingen en e v e n e m e n te n in h e t seizoen 1989/1990 C h e m ic a lië n ta n k e rs B ro e re 13 m rt. Groningen 14 m rt. A m sterdam 15 m rt. R otterdam w o. 4 apr. A m sterdam B in n e n v a a rt D e lezingen w o rd e n gehouden: 1. Bij de T U D e lft in de Aula, M ekelweg 5, aanvang 20.00 uur. 2. In R otterdam in de K riterionzaal van het G roothandelsgebouw , Stations plein 45, aanvang 20.00 uur. 3. In Am sterdam bij h e t IH T N O 'A m s te r dam’, Schipluidenlaan 20, aanvang 19.00 uur. 4. In G roningen in h e t Stadsparkpaviljoen, Paviljoenlaan 3, aanvang 20.00 uur. 5. In Vlissingen in h e t Strandhotel, Boul. Evertsen 4, aanvang 19.30 uur. A lle lezingen in R otterdam en D e lft w o r den gehouden in samenwerking m et de afd. M arTec van het K.l.v.1. en 'W illiam Froude’. Ing. K. Bos do. 19 apr. Vlissingen V e rk ie z in g h o o fd b e s tu u r O n tw e r p SES-KM S w o. 25 apr. T U D e lft D e n ie u w e R ijk s w e rf C d r. T . M o o im a n B e tro u w b a a rh e id s a n a ly s e K le in W o u d do. do. 15 m rt. Vlissingen do. 5 apr. R otterdam di. 3 apr. G roningen V e e rb o o t C an ad a C o n o sh ip di. 156 ed itio n looks ahead to the new decade. N e w articles have been included in this ed itio n on Finance Shipping and the Future o f LN G Trades. The position o f Lloyd’s o f London is discussed by Mr. M urray Law rence the Chairman o f Lloyd's. A dditional space has been allocated to the constantly changing shipbuilding industry and the developm ents that are taking place in ship propulsion. The fo u r key sections of th e Y earbook are: The Shipping Industry; Lloyd’s and Insurance; Legal and Interna tional Regulations and General Informa tion. They have been fully revised and up dated and provide as always a com prehen sive source in a vast range o f subjects. Published by: L lo yd ’s o f London Press Ltd. Sheepen Place, C olchester, Essex C 0 3 3LP U nited Kingdom J. M. V. 17 mei R otterdam 15 mei Groningen. D e schriftelijke verkiezing v o o r nieuwe le den van het H oofdbestuur heeft de v o l gende uitslag opgeleverd: Ir. W . J. de Nijs, 5 14 stemmen J. J. van d e r Meulen, 138 stemmen D. Barkm eijer, 481 stemmen lg. D. H. Kuiper, 178 stemmen Ing. H. D. van der W e rf, 592 stemmen P. Schröder, 74 stemmen Blanco, 5 1 stemmen SenW 57STE jA A R G A N G N R 2 A lg e m e n e L e d e n v e rg a d e rin g D e Algem ene Ledenvergadering van de N VTS zal in 1990 gehouden w o rd e n in G roningen in het Stadsparkpaviljoen op woensdag 18 april a.s. H et zeer voorlopige program m a ziet e r als volg t uit: 08.00 uur V e rtre k bus u it R otterdam . Rijdend via A m sterdam , waar leden u it de omgeving A m sterdam kunnen opstappen; is de v e r w achte aankom sttijd ca. 11.15 uur. I 1.30 uur Aanvang vergadering. 12.45 uur A p e ritie f en lunch. 14.00 uur Aanvang excursie, ca. 16.00 uur V e rtre k m et broodjes in de bus, rijdend via Amsterdam. ca. 19.00 uur A ankom st Rotterdam. ger Technisch en Nautisch O n d e rw ijs te R otterdam een symposium georganiseerd m et de tite l: ’Varen na(ar) het jaar 2000’ o ver de gem oderniseerde scheepsbedrijfvoering en de bijbehorende opleiding. Ballotage V o o rg e s te ld v o o r h e t g e w oo n lid m a a tsch a p J. G ROENEVELD International Service Manager, Vecom Technical Services St. C atharijnehof 5A, 3231 XS Brielle V oorgesteld d o o r M. L. J. Hage Afdeling: R otterdam C. P. V A N M E N IN G E N Com m ercial Manager, Radio Holland Ma rine Jan Schoutenlaan 39, 3705 VJ Z e ist V oorgesteld d o o r J. M. Veltman Afdeling: R otterdam J a a rfe e s t 1990 te R o tte rd a m O p zaterdag 12 mei 1990 zal in het teken van R otterdam 650 jaar het jaarfeest van de N VTS w orden gevierd. D it jaarfeest is een aangepast jaardiner, zoals vro e g e r ge bruikelijk. Een zeer voorlo p ig programma als volgt: I 3.00 uur O ntvangst m et koffie in M aritiem Museum 'Prins H e n d rik’. 14.30 uur Inscheping op m otorpassagiersboot ’C a ro lina’ m e t rondvaart d o o r R otterdam s ha vengebied, vanaf 18.00 uur A p e ritie f en Captains D inner bij de K o n inklijke Roei- en Zeilvereniging 'D e Maas’. D e kosten zullen waarschijnlijk ƒ 5 5 ,- per persoon bedragen. In het m aartnum m er van Schip & W e rf vo lgt een uitgebreide aankondiging m e t inschrijfmogelijkheid. D a g s y m p o s iu m O p 22 februari 1990 w o rd t d o o r h e t H o R. A . V A N S O LIN G EN Projectleider, V ecom Technical Services Mandolinestraat 27, 3208 DJ Spijkenisse V oorgesteld d o o r M. L. J. Hage Afdeling: R otterdam O nze zuster-afdeling O ffshore Techniek van het KIVI heeft vo o r het komende sei zoen een aantal lezingen georganiseerd, w e lke zeker o o k van interesse zijn v o o r de leden van de Afdeling M aritiem e Techniek. D aarom hieronder een k o rte opsomming. SenW 57STE jA A R G A N G NR 2 V o o rg e s te ld v o o r h e t C O M B IN A T IE L ID M A A T S C H A P Ir. E. R. M ETZ Kerkstraat 63, 2 2 7 1 CR V o orburg Afdeling: R otterdam V o o rg e s te ld v o o r h e t J U N IO R L ID M A A T S C H A P H .O . V A N H E R W IJ N E N Student S, Hogeschool D o rd re ch t W aalstraat 36, 3 3 13 X L D o rd re ch t V oorgesteld d o o rj. W . Pasveer Afdeling: R otterdam J. M A N D E M A K E R M aritiem O ffic ie r O pleiding H N O te R ot terdam Klaverstraat 54 c, 3083 V H R otterdam V oorgesteld d o o r R. W . P. Seignette Afdeling: R otterdam G epasseerd v o o r h e t G E W O O N L ID M A A T S C H A P C. H. STAPEL A d ju n ct D ire c te u r, W ilto n -F ije n o o rd BV O ude Singel 100, 2312 RE Leiden V oorgesteld d o o r Prof. Ir. S. Hengst Afdeling: R otterdam IR .j.F E IT H Afdeling: Am sterdam F. O . U D E M A D ire cte u r, Udema M aritim e BV + Udema T e a m w o rk BV Zuiderhaven 67, 8 8 6 1 C M Harlingen V oorgesteld d o o r j. L. Yntema Afdeling: Groningen R. A. HEIJKOOP Afdeling: R otterdam A. P. W E TZE L Technical S ervices/Adm inistration Mana ger, D e t norske Veritas H o lte rb e rg 92, 2905 N H Capelle a/d IJssel V oorgesteld d o o r L. W . Engelblik Afdeling: R otterdam VERENIGINGSNIEUWS L e z in g e n p ro g ra m m a A fd e lin g O ffs h o re T e c h n ie k N . D. V A N W IJK Schade-Expert, H. A . van Am eyde BV Ranonkelstraat I I , 3261 BR O ud-B eijertand V oorgesteld d o o r L Roest Afdeling: R otterdam D e lezingen vinden plaats in het Instituutsgebouw van het KIVI, Prinsessegracht 23 Den Haag, tenzij anders verm eld. De lezin gen beginnen om 19.00 uur. V o o r uitgebreidere inform atie w o rd t men doorverw ezen naar: Sekretariaat van de Afdeling O ffshore Techniek IR. T. FLAM ELING Afdeling: R otterdam K. A . P. L A N T IN G A Afdeling: Am sterdam IR. K. VISSER Afdeling: Am sterdam G epasseerd v o o r h e t J U N IO R L ID M A A T S C H A P J. H. J. JANSSENS Afdeling: R otterdam M A R IN , Postbus 28, 6700 A A W ageningen 22 m aart 1990: ’D e invloed van de offshore m ijnbouw op het m ilieu en het e ffect van de regelgeving’ Ir. P. J. M. van d e r Ham, m inisterie van Eco nomische Zaken Ir. F. M. Post, Rijkswaterstaat V e rte g e n w o o rd ig e r Greenpeace plaats: Rijkswaterstaat, Koningskade 4, Den Haag 19 aaril 1990: ’F3-veld en de N O G A T -p ijp le id in g ’ M edew erkers van de N A M 157 Iemand die ’s avonds nog eens lekker komt kletsen. Iemand die jou van een schoolfeest haalt, maar dan wel om de hoek wacht. Iemand die jouw liefdesverdriet heel serieus neemt. Iemand die snapt datje schreeuwt als je eigenlijk moet huilen. Iemand die weet hoe het voelt als bij je vriendin alles wél ’gewoon’ is. Iemand die begrijpt datje iets kapot wilt smijten als je vader gebeld heeft. Iemand die voor jou wil zorgen. Iemand die sterk genoeg is om je ook weer los te laten. Iemand die pleegouder wil zijn. P leeg o u d er zijn is niet altijd m akkelijk. H et boekje m et de v ersch illen d e vorm en van P leeg zo rg h elp t u te b eo o rd elen o f h et iets voor u is. U kunt h et gratis b oek je aanvragen m et d eze coupon. N a a m ____________________________________________ M/V Straat ----------------------------------P o s tc o d e _________ P la a ts ---------------------------------- — — (P r o v .)----------------------------- Tel O psturen naar A ktie P leegzorg, A ntw oordnum m er 9880, 3500 ZJ U trecht (een p o stze g el is n iet nodig). I___________________________________________________________________________________________________________________ A dvertentie aangeboden door dit blad in sam en w erk in g m et de Stichting Ideële R eclam e SIRE LITERATURE V erzorgd d o o r het M IC /C M O . Kopieën van de hier verm elde ar tikelen zijn tegen betaling v e rk rijg baar bij: Nederlands M aritiem Inform atie C e n tru m /C M O Postbus 21873 3 0 0 1 A W R otterdam Tel. 010-4130960, tst. 33 SW 90-02-01 N o r th Sea e x p e rie n c e w ith a lu m in iu m d rillp ip e T a rr, B.A.; Graham, I.A. D T C (76450), 8905, 1/5901, pg-167, nrpg14, g r-1 , tab-6, drw -6, ENG A lum inium drillpipe is a speciality product th a t has been recom mended fo r extended reach directional drilling operations. H o w ever, only lim ited operational experience has been re p o rte d fro m offshore drilling applications. In this paper the operational experience o f using a string o f 5 in. ( 127 m m ) aluminium drillpipe on a N o rth Sea p la tfo rm fo r a period o f 2-1/2 years is p re sented. A fte r plans to d rill extended reach w ells fro m the platform w e re shelved the alum inium drillpipe was taken o u t o f ser vice. The operational problems o f using the aluminium drillpipe w e re found to o u t w eigh the benefits w hen used to d rill the typ e o f directional wells described in this paper. 0620114 SW 90-02-02 U n d e r w a te r w e t w e ld in g o f h ig h e r s tre n g th o ffs h o re steels Ibarra, S.; Olson, D.L.; Grubbs, C.E. O T C (76450), 8905, 1/5889, pg-67, nrpg10, gr-9, d rw -1 , ph-3, ENG The problem s in underw ater w e t w elding o f higher strength steels are identified. En gineering fundamentals are being consi d ered to guide fu tu re research to o v e r com e some o f the lim itations to deep w e t u n d e rw a te r w elding o f higher strength steels. Six differen t approaches are sug gested fo r research to increase the w a te r d e p th fo r underw ater welding. 0320437 S W 90-02-03 D e e p w a te r C h ris tm a s tr e e d e v e lo p m e n t A lfano, P. P.; Barbosa, C. H. N . ; :Lewis, M. A. SenW 57STE IA A R G A N G N R 2 O T C (76450), 8905, 1/5887, pg-57, nrpg9, d rw -9 , ENG This paper presents the w o rk to date ac complished by a petroleum equipm ent company and its licencer in conjunction w ith a m ajor oil company in developing a subsea satellite layaway Christmas tre e to be used in 1800 m w a te r depths. The paper describes the technological agreement, the tre e description, the solution adopted in key areas o f the design, ho w interface points w e re defined fo r installation and operation, and fu tu re w o rk plans on p ro to ty p e fabrication and tests. Upon com pletion o f this p ro je c t this w ill be the first subsea satellite tre e built to be used up to this w a te r depth. 0620214 SW 90-02-04 G e n e ra liz a tio n o f T a y lo r ’s added-m ass fo rm u la fo r tw o bodies Landweber, L ; Chwang, A. T. Jrnl. Ship Res. (01490), 8903, 33/1, p g -l, n rp g -9 ,g r-2 , ta b -3, d rw -1 , ENG A previous generalization o f the Taylor form ula, which expressed the added mas ses o f a single body, moving w ith six de grees to freedom , in term s o f the system o f hydrodynamic singularities which gener ate the irro ta tio n a l flo w about the body, is fu rth e r generalized fo r the case when another m oving body is present. This w o rk was stimulated by a study o f the h ydrody namic interactions betw een an ice mass and a ground-based offshore structure. The results are applied to calculate the var iation o f the added masses as a rectangular cylinder approaches a circular one. A new simple relation betw een the added masses o f a rectangle moving parallel to its longer o r s h o rte r side, and a m ore com plete table o f the added-mass coefficient fo r various thickness-length ratios than was previously available, is presented in the A ppendix SW 90-02-05 T h e d isp e rsio n o f gases in o ffs h o re p la tfo rm s Lindberg, B.; McFadyen, K.; Fulton, R. Inst. Marine Eng; Trans. (03310), 8912, 101/6, pg-289, nrpg-14, gr-8, tab-1, d rw 12, ENG O ffshore related w o rk has always de manded the highest standards o f safety in design and operation. Recent tragic events have emphasised the need fo r constant awareness and developm ent o f safety techniques. Gas leakage is an inherent risk in certain areas o f a platform . These areas require intrinsically safe equipm ent to gether w ith d e te ctio n and fire c o n tro l sys tems. H ow ever, fo r overall safety, ventila tio n is the m ajor preventative influence. V e ntilation design should th e re fore o p tim ise proven techniques fo r dilution and re moval o f gases and the elim ination o f stag nant areas o f potentially high gas concent rations. The paper w ill describe the ve n ti lation requirem ents fo r hazardous areas in particular and fo r open as w ell as closed modules, and w ill discuss the advantages and disadvantages o f these tw o types fro m the p o in t o f view o f ventilation in d ire ct relation t o safety. 0161240 SW 90-02-06 U n c e rta in tie s in th e e s tim a tio n o f flu id lo a d in g on o ffs h o re s tru c tu re s w ith special em phasis on w in d fo rce s Singh, S. Inst. Marine Eng; Trans (03310), 8912, 101/6, pg-269, nrpg-19, g r-1 5, tab-2, d rw 10, ENG Some o f the m ajor uncertainties in the es tim a tio n o f mean drag forces on offshore structures, especially those generated by w ind, are presented and discussed. Stan dard techniques, as suggested by published crite ria and guidelines, have been used to illustrate some o f these uncertainties fo r three cases. These are loads on the legs o f a jack-up unit, loads on a group o f conduc tors, and finally, w ind forces on a semi-submersible unit. Potential problem s in the use o f w ind tunnel modelling are also dis cussed and recom mendations made fo r a unified and consistent approach to es tim ating mean drag forces on offshore structures. 0630219 SW 90-02-07 C o n tr o l o f re m o te ly o p e ra te d vehicles (R O V s) in th e fu tu re London, K. B.; Chapman, R. R. Inst. Marine Eng; Trans. (03310), 8910 101/4, p g - l89, nrpg-5, d rw -4 , ENG ROVs are now used extensively by the o ff shore, defence, telecom m unications and leisure industries. The size and cost o f these vehicles have decreased dramatically o ver the last decade. These vehicles have, at present, a lim ited range and depth capa b ility w ith respect to theis ’parent' vessel, as they are 'te th e re d ' by an umbilical. This paper discusses some o f the technical de velopm ents necessary to make these ve hicles fully autonomous, and ends by em phasising the realistic m arket potential fo r such systems. 0610414; 1131200 159 SW 90-02-08 D iffs ta r, a d iffe r a n tia l GPS sy ste m in th e N o r th Sea H ervig, K. N A V C onference (75 326), 8 9 10, 1/19, pgI , nrpg-9, gr-9, d rw -4 , ph-1, ENG Kongsberg N avigation N o rw a y has de veloped a differential GPS system intended mainly fo r the oil exp lo ra tio n industry on the N orw egian C ontinental Shelf. The sys tem has been b u ilt up to cover a large area fro m the Barents Sea dow n to the English channel. This paper describes the D iffstar system principles and coverage, and p re sents results fro m use o f th e system. 0210511 solve the ship param eter estim ation p ro b lem. Simulations and real scale tests on tw o ships showed that the e x p e rt system and extended Kalman filte rin g approaches do n o t give satisfactory results. The problem was solved by using the steepest descent optim ization m ethod fo r minimising the square sum o f the Kalman filte r innovation signals. N onlinear optim iza tio n seems to be the m ost prom ising m ethod fo r tuning the parameters o f the dynamic positioning (D P ) system used in offshore operations. The know ledge required to determ ine the initial values fo r the DP-system parame ters can be expressed by using traditional high level language structures. 0160613;0610410 SW 90-02-09 T u n in g o f d y n a m ic p is itio n in g sy s te m b y e x p e r t syste m te chn iqu es SW 90-02-10 Selkainaho, J.; Saastamoinen, M. E xpe rt Systems and Signal Processing in Marine A u to m a tio n (7121 3), 8908, pg-59, nrpg-8, g r-1 7, tab-1 , d rw -1 , ENG T hree d iffe re n t m ethods w ere studied to 100A I, Lloyd’s Magazine (01700), 8909,/3, pg-10, nrpg-4, d rw -3 , ph-4, ENG There have been several concrete gravity platform s installed in the N o rth Sea, but the Ravenspurn N o rth platform is diffe In a d iffe r e n t m o u ld rent. It is the firs t concrete platform to be b u ilt in the U K fo r 10 years, the firs t to be installed in the shallow w aters o f the southern N o rth Sea and the firs t N o rth Sea concrete platform to be bu ilt entirely in d ry dock. 0 6 3 0 113 Bij bestelling van artikelen d ie n t u het num m er van het abstract op te geven. H e t eerste num m er tussen haakjes in de bronverm elding ve r w ijs t naar het d o o r M IC /C M O gehanteerde publikatie code sys teem . D e bibliotheek van het Nederlands M aritiem Inform atie C en trum is geopend op werkdagen van I 1.00 to t 16.00 uur. H e t adres is Blaak 16, Rotterdam . P ro je c t E n g in e e r m /v D am en Shipyards houdt zich bezig m et ontw e rp , leve ring en e xp lo ita tie van schepen in lengten van S to t 120 m eter en vermogens to t 10.(KMI kW . D aarnaast repareert Dam en bedrijfsvaartuigen en zeeschepen to t 15.(WK) u lw op haar vestigingen in N ederland, D u itsla n d en G ro o t-B ritta n n ië . De D am engroep om vat thans een 15-tal bedrijven vo o r p ro d u k tie van schepen en is daarmee de grootste pa rticu lie re scheepsbouwgroep in Nederland. V ereisten: - O p le id in g H T S scheepsbouw o f gelijkw aardig. - E nkele jaren ervaring met bouw van vissers schepen. - C om m ercieel inzicht. - C re a tiv ite it en fle x ib ilite it. - Goede kennis van de engelse- en bij v o o rk e u r ook de franse taal in w o o rd en geschrift. - L e e ftijd 25 - 35 ja a r. V o o r de vestiging van Scheepswerf D am en B .V . te G orinchem vraagt de P roduktgroep V isserijschepen, w aar schepen vo o r de inte rn a tio n a le visserij w orden o ntw o rp e n en gebouwd, een Project*Engineer. Geboden w o rd t: - Een uitstekend salaris in overeenstem m ing met de gestelde eisen. - Afw isselend en zelfstandig w erk. - G oede prom otiekansen in een dynamisch en snelgroeiend b e d rijf. - Goede secundaire voorzieningen. Deze functie om vat: - H e t zelfstandig u itw e rke n van projecten op tech nisch gebied, naar aanleiding van aanvragen van onze kla nte n , wat in h o u d t het zelfstandig maken van een vo o ro n tw e rp , bestek en begrotingscalculatie. - H e t verlenen van technische ondersteuning ten dienste van de verkoop-afdeling. - In het team van de p ro d u cto n tw ik k e lin g van visserijschepe n . 160 B elangstelling? V o o r m eer inlich tin g e n kunt U bellen met de heer H .P .F . V o o rn e ve ld . d irecteur Visserijschepen. T e le fo o n (01830) 39911. U w sc h rifte lijk e so llic ita tie k u n t U richten aan D am en Shipyards. postbus i.4 2 0 0 A A G o rinchem . t.a .v. de afdeling personeelszaken. SenW 57STE jA A R G A N G N R 2 Van der Giessen-de Noord shipbuilding division B. V., de scheeps werf te Krimpen aan den IJssel waar onder dak een indrukwekkend productieprogramma wordt gerealiseerd, zoekt op korte termijn een functionaris die het als een uitdaging ziet de spil te zijn in de operationele organisatie, de tussenpersoon voorde voorbereidingsafdelingen en de productie, als hoofd centraal planbureau Wij denken dat degene (m/v) die wij zoeken: - een grote practische kennis heeft van de bouw en inbouw van schepen, - de planmatige aanpak, gebruikmakend van automatiseringstechnieken, essentieel vindt voor het succesvol voor bereiden en produceren van gecompliceerde schepen, - van technisch en organisatorisch voldoende niveau is om m et succes de productiedoelstelling te formuleren en voor te bereiden en te vertalen naarde technische voorberei dingsafdelingen zodanig dat een doelgericht proces ont staat van contract tot oplevering. Bent u deze jonge dynamische organisator o f de meer ervaren productiemanager die graag zijn/haar kennis wil vertalen in planmatige voorbereidingen o f denkt u op andere gronden de juiste persoon te zijn die wij zoeken, richt u dan schriftelijk tot onze Centrale Personeelsdienst, t.a.v. de heer E.C.M. de Waal, Postbus 1 ,2 92 0AA Krimpen aan den IJssel. van der Giessen-de Noord N. V. Schaardijk23 - 2 9 2 1 LG Krimpen aan den IJssel. Telefoon 01807 - 12144* AI61 Voor ons districtskantoor te Am sterdam zoeken wij een Bureau Veritas Surveyor Functie-inhoud Bureau Venlos geniet internationale faam als classificatie- en surveybureau en is e rkend d o o r de regeringen van 122 tanden Bureau Ventas is opg erich t m 1628 te A ntw e r pen Hot h oo ld kan too r zetelt in Pari/s 5000 Employees verspreid over 4 8 5 vestigingen voeren w erkzaam heden uit, verdeeld over 5 d ivisies scheepvaart on otfshore, p ro du kten en goederen industrie lu ch t vaart, g ebouw en on civiele werken - - B ureau Ventas ziet toe op de veiligheid en kw a lite it van 3 00 offshore eenheden 7300 schepen 10800 vliegtuigen 225 00 tankcontainers Por ia a r verricht B ureau Veritas 6 000 surveys op h et g e b ie d van g ebouw en on civie le werken Ten behoeve van d ocum entaire cre d ie ie n w o rd en 4 0 0 0 0 pre shipm ent-m specties p o r ja a r uitgevoerd B ureau Veritas heeft in tota al 2 2 0 0 0 0 0 boxcontainers gekeurd Functie eisen - - i ƒ ƒ het beoordelen van scheepsconstructies, scheepsinstallaties en uitrusting volgens de Bureau Veritas Rules and Regulations, IMO/LLC en de voorschriften van overheden. het toezicht op de fabricage en het onderhoud van m aritieme constructies bij toeleveringsbe drijven. het keuren van ontw erptekeningen en het be oordelen van de uitrusting voor schepen en offshore platform s. het adm inistratief verwerken van de rapportage. HTS Scheepsbouw of W erktuigbouw. leeftijd 30-35 jaar. beheersing van de Engelse taal in w oord en geschrift; kennis van de Franse taal strekt to t aanbeveling. w oonachtig in de om geving van Am sterdam . Voor onze ’ Marine B ranch’ te Rotterdam zoeken wij een B ureau Veritas O uality Inte rn atio n al (BVQI) is een d ochterondernem ing en erke nd doo r de B aad voor de C e rtificatie en de NACCB m e t als a ctivi teit h et certificeren van kw a lite it s borgm gssystem en volgens ISO 9000. Ingenieur werktuigbouw kunde/ scheepsbouwkunde te r versterking van de 'Dutch Plan A pproval O ffice’. Functie-inhoud - Functie-eisen - het keuren van de ontw erptekeningen van scheepsconstructies, en installaties volgens de Bureau Veritas Rules and Regulations. het keuren van de ontw erptekeningen van offshore installaties (vaste en mobiele platforms). het uitvoeren van technische berekeningen, zoals bijv. eindig elementen berekeningen, trillingsanalyses en risicoanalyses. Voltooide opleiding aan de Technische Universiteit, afdeling W erktuigbouw kunde o f Mari tiem e techniek. affiniteit met scheepsw erktuigkundige installa ties. affiniteit met (scheeps) constructies. kennis van eindig elementen berekeningen. in staat zijn to t het zelfstandig kunnen uitvoeren van projecten. ervaring in om gang met com putersystem en. leeftijd ca. 30 jaar. w oonachtig in de om geving van Rotterdam. beheersing van de Engelse taal in w oord en geschrift, kennis van de Franse taal strekt to t aanbeveling. Voor beide functies kan een psychologisch onderzoek deel uitm aken van de selectieprocedure. U kunt uw sch rifte lijke sollicitatie m et c.v. richten aan de afd. personeelszaken van Bureau Veritas, Postbus 2705,3000 CS Rotterdam . Voor telefonische inlichtingen kunt u vragen naar Mevr. Th. Moree, Hoofd Personeelszaken van ons Bureau, W estblaak 7, tel. 010-4119733. A l 62 IHC G u sto Engineering - een 100% d o c h te r van IHC C ALAN D - is een ingenieursbureau d at zich to e le g t op de dienstverlen in g ten behoeve van de o ffsh ore industrie en de zw are m eta al industrie. De ke rn activite iten bestaan o.a. uit het m aken van co m p le te ’cu sto m b u ilt’ o ntw e rp en van d .p . b oorschepen, (halfafzinkbare) b oo r-, d rijven de p ro du ktie p ijp en le g - en kraanvaartuigen, offshore kranen m et een g ro o t hefverm ogen, zelfheffende b o o r- en a cco m m o d a tie e ilanden en andere sp eciale vaar- en w erktu ig e n . De o n d erne m in g kan bogen o p een g e ve stig d e rep u ta tie die s to e it o p een g ro o t aantal in b e d rijf zijnde eenheden o n tw o rp e n en g e b o u w d v o o r c liën ten o ver d e gehele w ereld. T e r verste rkin g van d e o n tw e rp a fde lin g ’S tru ctu ra l & M echanica! D esign’ zoeken w ij k o n ta k t m et ingenieurs v o o r d e n avolgende funkties: Ontwerper werktuigbouw (mechanisch) ir/ing. w ien s w erkzaam heden zich zullen bew egen o p het terrein van het berekenen, o ntw e rp en en tekenen van zw are g e co m p lice e rd e m echanische co n stru ctie s en begeleiding bij de verdere detaillering. Kennis van hydrauliek en pne um atie k, alsm ede m oderne rekentechnieken, m aterialenkennis en inzicht in p ro d u k tie te c h n ie k en - kosten zijn een vereiste. Ontwerper werktuigbouw (structureel) ir/ing. w iens w erkzaam heden zich zullen bew egen o p het terrein van het berekenen, o ntw e rp en en tekenen van zw are g e co m p lice e rd e sta alco n stru ctie s. K ennis van de m od erne ste rktereke np a kk e tte n en verm oeiingsberekeningen, m ate ria len ken nis en inzich t in p ro d u k tie te ch n ie k en -ko ste n zijn een vereiste. Voor deze vakatures geldt dat kandidaten de Engelse taal in woord en geschrift dienen te beheersen, daaren boven verwachten wij van de sollici tanten de capaciteit om problemen vlot en goed te doorgronden, een flexibele denkwijze, zelfstandigheid en een hoge mate van creativiteit. Uw bij voorkeur schriftelijke sollici tatie dient U te richten aan IHC Gusto Engineering t.a.v. de heer W.A.H.M. Vossen, Postbus 11,3100 AA Schiedam. GUSTO ENGINEERING ’s-Gravelandseweg 557, Schiedam A I63 vlaardingen oost scheepsreparatie H et g a a t goed m et V laardingen O ost S ch e e p sre p a ra tie b v ! II» Vlaardingen Oost Scheepsreparatie is een De R ijksw erf in D en H e ld e r is één va n d e o n d e r h o u d s b e d rijv e n va n d e K o n in k lijk e M a rin e (KM). De circa 1.300 b u rg e rp e rs o n e e ls le d e n va n de ze dienst z ijn b e la st m e t de re p a ra tie en h e t o n d e rh o u d va n de M a rin e -s c h e p e n . V oor de a fd e lin g Sterf S cheepsbouw w o rd t g e zo ch t een m id d e lg ro o t s ch e e p sre p a ra tie b e d rijf in het R ijnm o ndg eb ied m et een w e re ld w ijd e kla nten kring . Een b e d rijf m et een n o -n o n se n se in ste llin g die b e staan de en nieuw e o p d ra ch tg e ve rs a a n sp re e kt en nieuw e w e rkte rre in e n ontsluit. D oor de v o o rtd u re n d g o ed gevulde o rd e rp o rte fe u ille zoeken wij v e rste rkin g van o n s team met: 'CHEMISCHE I0L0GIE (V/M) v o o r d e fu n ctie v a n M a in te n a n c e E ngineer Scheepsb o u w p ro c e s s e n /V O M Projektleiders scheepsreparatie Een o p le id in g H T S -sche ep sbou w , W erktuigbouw , o f S ch e e p sw e rktu ig b o u w B /C is noodzakelijk. Zij krijg en de te c h n is c h e en kom m ercièle ve ra n tw o o rd in g voo r alle re p ara tie w e rkzaam h ed en aan b o o rd van zeeschepen. D aarnaast be ge le id e n zij o o k a n de re pro jekte n, die in nauw overleg m et de versch ille n d e hoofden van a fd e lin g e n g e ko ö rd in e e rd m oeten w orden. Zij o n d e rh o u d e n kon takten m et op d ra ch tg e ve rs, kla ssifika tie b u re a u s, sch a d e -e xp e rts en o n d e ra a n n e m e rs o m tren t te ch n isch e en kom m e rcièle zaken. TAAK ^ i ' -■*■ Rekeningmaker / Werkomschrijver H iervoo r is een o p le id in g op H TS-niveau S ch e e p sb o u w e n /o f W erktuig bo uw gewenst. Zijn taak zal be staan uit het o p ste lle n /ka lku le re n van re ke n in g e n b e tre ffe nd e de uitgevoerde p ro je kte n in de nede rlan dse , engelse en d u itse taal. vlaardingen oost a n k e r en ke ttlng fa briek II» U d r a a g t z o rg v o o r d e technische a d vise rin g , w e tg e v in g en g e g e v e n s v o o rz ie n in g t.b.v. de Rijks w e rf. D a a rn a a s t v e rz o rg t u o o k de technische a d v is e rin g t.b.v. de D ire ctie M a te rie e l K M , de vlo o t, diensten en in ste llin g e n va n de KM en a n d e re M a rin e -b e d rijven. H e t in n o v e re n va n technische p ro d u k te n en p ro d u ktie p ro ce sse n b e h o o rt eveneens to t uw ta k e n p a k ket. U a n a ly s e e rt en ra p p o rte e rt o n d e rh o u d t- en g e b ru ik e rs e rv a rin g , technische fo u te n en pro b le m e n . D a a rn a a s t le v e rt u een b ijd ra g e in w e rk g ro e p e n , com m issies e.d. O o k c o ö rd in e e rt en b e w a a k t u de u itv o e rin g va n d e re g e lin g " v e r fra a iin g acco m m o d a tie schepen K M m et e ig e n m id d e le n " en g e e ft u le i d in g a a n één o f m e e rd e re assistent-stafadviseurs V O M . N a a r ve rw a c h tin g z a l de ze fu n ctie -in h o u d w o rd e n u itg e b re id in de rich tin g va n een to e n e m e nde v e ra n tw o o rd e lijk h e id v o o r projecten . GEVRAAGD S erieuze k a n d id a te n zijn in het b e zit v a n het d ip lo m a HTS-Chem ische Te chno lo gie , b ij v o o rk e u r ric h tin g be scherm in gstech niek. D a a rn a a s t h e e ft u een o p le id in g g e v o lg d o p h e t g e b ie d v a n b e tc h e rm ing stechn ieke n m.b.t. de technische, b e d rijfs k u n d ig e en o rg a n isa to risch e aspecten. O o k h e e ft u de n o d ig e e rv a rin g o p h e t g e b ie d va n o p p e rv la k te b e h a n d e lin g e n in een m a ritie m m ilie u. Eveneens w o r de n h o g e eisen ge steld a a n uw con tactue le e ig e n scha ppen . Vlaardingen Oost Anker- en Kettingfabriek, een g e ïn te g re e rd o n d e rd e e l van V la arding en O ost S ch e e p sre p a ra tie , is aktief op het te rre in van de h a nd el in sch e e p sa n ke rke ttin g e n , an kers en toebeh ore n. Bovendien be h o re n het verva ard ige n van alle typen h ijsh u lp stu kke n , testen van ankers, kettingen, slu itin g e n en spe ciale ob jekte n to t het le verin gspro gra m m a. Voor deze fa b rie k be staat de vaka ture van: G E B O D EN Een b o e ie n d e en ze lfs ta n d ig e fu n ctie in een v e e lz ijd ig e en com plexe o rg a n isa tie . U w b ru to ja a r salaris b e d ra a g t m a x im a a l circa f 6 8 .0 0 0 ,-, in d . 8% v a k a n tie to e s la g . H e t a a n ta l v a k a n tie d a g e n is gesteld o p m in im a a l 23 p e r ja a r, plus 12 A D V -d a g e n . D a a r na a st w o rd e n u uitste ke n d e s tu d ie fa cilite ite n g e b o Technisch kommercieel medewerker Wij de nke n aan iem and met een o p le id in g op HTSniveau C hem ische T echnologie o f W erktuig bo uw in de le e ftijd ka te g o rie van 3 0 -4 0 jaar. Z ijn ta a k zal bestaan uit de in - en ve rko o p van a n ke rke ttin g e n en toebehoren. Tevens zullen zijn te c h n is c h e vaa rdig he de n hem in staat m oeten stellen sp e cia le w ensen van o p d ra ch tg e ve rs tu rn k e y te behandelen, te ka lku le re n en te begeleiden. Inten sief ko n ta kt m et diverse ke u rin g sin sta n tie s als kla ssifika tie b u re a u s, ha ven arbe id sinsp ektie en sch e e p va a rtin sp e ktie zal eveneens deel uit m aken van zijn taak. den. REACTIES M e e r in fo rm a tie o v e r d e fu n ctie kun t u in w in n e n b ij de h e e r H.J. C ruijff, (02230) 56336. De heer J.j. A lse rd a , (02230) 57244, k a n u in fo rm e re n o v e r de s o llic ita tie p ro c e d u re . B ij g e lijk e g e schiktheid g e n ie te n le d e n v a n etnische m in d e rh e d e n en g e h a n d ic a p te n de v o o rk e u r. U w s ch rifte iijke s o llic ita tie ku n t u binn en 14 d a g e n na v e rsch ijn in g va n de ze a d v e rte n tie richten a a n de A lg e m e e n D ire cte u r R ijksw erf, t.a.v d e staf a fd e lin g Personeelszaken, po stbus 2 5 ,1 7 8 0 A A Den Een fu n ktie m et pe rsp e ktie ve n voo r de totale ve ra n tw o o rd e lijkh e id van de a n k e r/ke ttin g a ktivite it; H elder. S o llicita tie s te ric h te n aan: O Vlaardingen Oost Scheepsreparatie bv A fd e lin g P ersoneelszaken, Mevr. M .C. Vreeker P ostbus 47 3130 AA V la a rd in g e n \W O b u rg e rp e rs o n e e ldefensie WIJ HEBBEN DE IDEEËN «v N iem and kan er m eer om heen: c o m m u n ic a tie is dé eis van het huidige in fo rm a tie tijd p e rk. En daarin spelen aud io visue le technieken een uiterst belan grijke rol. T o c h w o rd t zelfs het m eest g eavanceerde A V -m e d iu m o ve rb o d ig als de to e s c h o u w e r g e co n fro n te e rd w o rd t m e t b lo ed elo ze rech tto e -re ch ta a n p ro g ra m m a ’s, w aaraan visueel en a u d itie f niets te beleven valt. W e sth ollan d V ideo / G roe p (WHVG) is een Bureau vo o r A udiovisuele P rodukties. A ls ze lfsta n d ig e fuif service p ro d u k tie m a a ts c h a p p ij hebben w e b e w u s t en m et su c c e s g eïnvesteerd in kw aliteit. H et b est k o m t d a t to t u itd ru k king in onze e in d p ro d u kte n : 1 -inch v id e o -, film -, en b an d d ia p ro d u ktie s, gebaseerd o p sterke ideeën. W IS M M ê M M S N B VIDEO/GROEP Adres : van Beethovenlaan 69B 2253 BE Voorschoten Tel. : 0 1 7 1 7 -8 1 1 8 Fax : 0 1 7 1 7 -8 0 9 0 Lid Nederlandse Beroepsvereniging van Film- en Televisiemakers KLANTEN O.A.: ANWB. CARAN D'ACHE, CENTRAAL BEHEER, DHL INTERNATIONAL BV, ESVEHA, FESTO, GELDERSUTRECHTSE SPAARBANK, HVR. ALLIANCE. KLOOS RAILWAY ENGINEERING, MINISTERIE VAN ONDERWIJS EN WETENSCHAPPEN, MOULINEX, NISSAN EUROPE NV, ORDINA COURSEWARE BV, PRODUKTSCHAP VOOR VIS EN VISPRODUKTEN, SERVEX BV, SHELL. UNIE VAN WATERSCHAPPEN. VOS & PARTNERS, ZEEMAN WHVG Omdat eenAVstaat ofvalt met het idee, C a n y o u im agine a sh ip ya rd n o i being D utch... Strategically situated in the centre of the Rotterdam port area, at the gateway to Europe, Wilton-Fijenoord offers services, both at the yard and in-port, in the field of repairs and maintenance to all kinds of merchant vessels. The open connection with the North Sea makes the yard accessible to all large ships and offshore constructions. Dry-dock facilities are available of up to 160.000 dwt. We offer a modern, well-equipped yard, a flexible organisation and highly skilled labourers; thus we are able to guarantee first class quality, quick delivery and all-out reliability. Being the largest Dutch ship-repair company with an international reputation, we cannot risk cutting corners in this regard. For more information, just give us a call. Wilton - Fijenoord ship-repair, maintenance and dry-dock facilities PO Box 22, 3100 AA Schiedam, Holland, Telex: 21451 -24436, Telefax: +3110 - 4732577, Phone: + 311 0-4 26 920 0