ON Teach The Teachers On CNC Technology

JSS Academy of Technical Education
Registration Fee
JSS MAHAVIDYAPEETHA
Bangalore - 560060
Faculty Development Program On
“Teach the Teachers on CNC Technology”
29th April to 4th May, 2013
The registration fee for faculty from AICTE
recognized institutions and research scholars is
Rs. 1000/-, and for working professionals from
industry is Rs. 2000/-.
Name: ________________________________
The payment should be made by a crossed
Designation:___________________________
demand draft drawn in favour of “Principal
Department:___________________________
JSSATE” payable at Bangalore.
Institution Address:______________________
No TA & DA will be provided to the participants.
_____________________________________
Important Information
_____________________________________
The application should be accompanied by
Phone/Mobile:__________________________
Fax:__________________________________
Email:________________________________
Payment Details:
registration fee. Last date for the submission
JSS Academy of Technical Education
Bangalore - 560060
FACULTY DEVELOPMENT PROGRAM
ON
Teach the Teachers on CNC Technology
29th April to 4th May, 2013
Organized by
DEPARTMENT OF MECHANICAL ENGINEERING
JSS ACADEMY OF TECHNICAL EDUCATION
Bangalore–60
in association with
of application is 20.04.2013. Confirmation of
MICROMATIC MACHINE TOOLS PVT. LTD., Bangalore
selection to participants shall be intimated on
CADEM TECHNOLOGIES PVT. LTD., Bangalore
&
VISVESVARAYA TECHNOLOGICAL UNIVERSITY, Belgaum
25.04.2013 by e-mail
D D No:______________Date:____________
Convenor
Amount in Rs._________Drawn at__________
Dr. B P SHIVAKUMAR
Address for Correspondence
Mr. B V RAGHAVENDRA
Date:
Signature of applicant
Certificate
Program Coordinator & Asst. Professor,
Dept. of Mechanical Engineering,
JSS Academy of Technical Education,
Certified hereby that Dr./Mr./Mrs._______
JSS Campus, Uttarahalli-Kengeri Road,
________________________________will
Mylasandra, Bangalore-560060.
be permitted to attend the above course to be
Ph No: 09481776070, 09731387331
held at JSS Academy of Technical Education,
080-28612706
Bangalore from 29th April to 4th May, 2013.
Website: www.jssateb.ac.in
E-mail:bv_raaghu@yahoo.co.in
Signature of Head of Institution/Department
Fax No: 080-28612706, 28612646
Prof. & Head, Dept. of Mechanical Engineering
JSS ACADEMY OF TECHNICAL EDUCATION, Bangalore–60
About the Institution
JSS Academy of Technical Education, Bangalore is
a premier educational institution run by the JSS
Mahavidyapeetha, Mysore. The Mahavidyapeetha
shelters over 350 institutions, both at home and
abroad. The JSSATE campus is spread over 21
acres of land surrounded by lush green plantation
on the south western part of Bangalore city. The
institution established in 1997 conducts seven
under-graduate programmes, four post-graduate
programmes in VLSI, MEM, PDM and MBA. The
whole campus is networked and has centralized
browsing facility with 4MBPS dedicated internet
bandwidth with ISDN backup and Wi-Fi facility.
The departments of Mechanical Engineering, IEM,
Instrumentation Technology & MBA are recognized
research centres under VTU, Belgaum. The
institution also houses an Advanced Jewellery
Design Technology Centre and Product Lifecycle
Management Competency Centre in technical
collaboration with Dassault Systemes France,
Ministry of Education, France and JSS
Mahavidyapeetha, Mysore.
About the Department
The Department of Mechanical Engineering was
established in 2004 with an intake of 60 students
affiliated to VTU, Belgaum and is recognized by
AICTE, New Delhi. The department has qualified
and experienced teaching faculty with state of the
art infrastructure, and modern teaching aids
catering to the needs of VTU curriculum. It also
has a
Research and Development Centre
recognized by VTU, Belgaum.
About Micromatic Machine Tools
M/s. Micromatic Machine Tools & its group, is a
renowned manufacturer of an array of products
such as Turning Machines, Milling Machines,
Grinding Machines, Automation Machines and
Productivity Solutions Machines. They develop
highly quality products by using best raw materials
to fulfill the market demand.
on CNC machining technology. All products are
designed and developed by CADEM Technologies
inhouse. CADEM Technologies are pioneers in
developing and marketing of CNC turning and
milling simulation software. Many technical
institutes in India and abroad use CADEM products
to study CNC programming and Computer Aided
Programming as part of their syllabus.
Eligiblity
Teachers from AICTE recognized engineering
colleges, Polytechnics, research scholars working
in R&D organizations and working professionals
from industries in the relevant field are eligible to
apply for participation.
Chief Patron
Course Objective
The main objective of this program is to enlighten
the participants on the teaching methodology and
hands on experience for CNC turning, CNC milling
and simulation software. This course helps to
acquire insight into the subject and create interest
in students of engineering. Another objective is to
motivate the faculty to pursue higher studies and
research in the field of CNC machines.
We also recognize recent trend in the industry of
an upsurge requirement for the engineers to face
the global challenges in the productivity. An
efficient knowledge of CNC machines and the
programming concepts will enhance the
potentiality of the engineer to face the global
challenges in the manufacturing industry for
improving productivity. There is a renewed need
for quality engineers with sound knowledge of
machines and CNC programming. This course will
equip the faculty to train their students to meet
the challenges of the growing aerospace and
automobile sectors. Department of Mechanical
Engineering, JSSATE has launched an initiative in
this direction to organize the event through this
course.
Course Contents
The course content is designed to impart
knowledge on CNC turning & milling operations
like simple turning, step turning, taper, profile,
thread cutting, grooving, internal machining,
surface milling, side milling, drilling, counter bore,
tapping, pocketing, etc., using CADEM software.
About CADEM Technologies
Resource Faculty
M/s. CADEM Technologies Pvt. Ltd, Bangalore was
started in 1989 & has a range of products for
monitoring and improving the productivity of
manufacturing industries, programming and
program transfer for CNC machines and training
The resource personalities for the course are from
M/s. Micromatic Machine Tools and M/s. CADEM
Technologies having vast knowledge and
experience on CNC Technologies.
His Holiness Jagadguru Sri Sri Sri
Shivarathri Deshikendra Mahaswamigalavaru
Jagadgurugalu, Veerasimhasana Mutt
Sutturu Srikshetra
Patrons
Sri B N Betkerur
Executive Secretary, JSSMVP, Mysore.
Prof. M H Dhananjaya
Director (TED), JSSMVP, Mysore.
Advisory Committee
Dr. B T Nijaguna
Prof. Emeritus & Advisor, JSSATE, Bangalore.
Dr. Mrityunjaya V Latte
Principal, JSSATE, Bangalore.
Organising Committee
Dr. Shankargoud N, Associate Professor
Mr. Suresh Holi, Assistant Professor
Mr. K M Nataraj, Assistant Professor
Mr. H Prakash, Assistant Professor
Mr. K S Anil Kumar, Assistant Professor
Mr. M Mruthunjaya, Assistant Professor
Mr. T K Nagaraj, Assistant Professor
Mr. Sreekantamurthy, Assistant Professor
Mr. B N Venkatesh, Assistant Professor
Mr. Devappa, Assistant Professor
Mr. G M Swamy, Assistant Professor
Mr. P N Siddappa, Assistant Professor
Venue
SEMINAR HALL
JSS Academy of Technical Education,
JSS Campus, Uttarahalli-Kengeri Road
Mylasandra, BANGALORE - 560060