Conversion Upgrades for Competitive Brand

PRODUCT INSIGHT
Conversion Upgrades for
Competitive Brand Systems
Most center pivot structures will outlast the drive train and alignment components by several years. To improve the functionality of your existing center pivot, Lindsay has developed a line of quality components to fit non-Zimmatic systems in order to maximize value
and optimize the performance of center pivots already in operation.
The attached Product Insight allows you to determine which options will best fit your nonZimmatic machine in order to maintain and improve its performance and reliability.
1
Conversion Upgrades for Competitive Brand Systems
Existing Machine Conversion Upgrades
Mechanized irrigation operates in some of the harshest environments with the expectation of
continuous reliability. From high temperatures in desert conditions with extreme sunlight to frigid
environments with ice and snow, irrigation systems endure the toughest working environments.
This constant change and rugged wear will eventually deteriorate components and an upgrade to
those system will be required.
Lindsay has released a series of upgrades to address competitive systems to get these systems to
the same reliability as a new Zimmatic system. Lindsay offers upgrades for the precision alignment
to the rugged drive train and even the latest in irrigation system controls. Included in this package
are easy to use ready to install kits containing all the necessary components needed to upgrade
these older unreliable systems. Lindsay also offers hardware add on equipment to add spans,
pivot points, and corners to existing irrigation systems in
the field.
Alignment Upgrades
A system’s alignment is crucial to accurate actuation of pivot functions like end guns and
multi operations as well as structural integrity on the pivot point and joints.
Zimmatic has proven its alignment is the industry best in both long system and standard
system alignment. Lindsay uses a weather tight double lip tower box that seals all the system controls. Highly sensitive long arm switches and corrosion resistant alignment components maintain accuracy for many years.
Pivot Control Upgrades
GrowSmart Panels offer the latest in industry controls saving time, money and chemicals with easy-to-use features.
You can use GrowSMART controllers in any field condition, whether you have uneven terrain, varying soil types or are growing multiple crops.
Plus, you’ll benefit every day from:
√
√
√
√
√
√
√
√
2
Precision water application
Significant reduction in water use
Fewer worries and hassles
Energy conservation
Faster applications
Minimized leaching of nutrients past root zones
Better irrigation management decisions
Reduced chemical and labor inputs
Conversion Upgrades for Competitive Brand Systems
Encoder and position upgrades
Lindsay offers a wide range of precision position options. From a low cost encoder upgrade for existing major brand electrical irrigation systems to a complete position system for non-electrical systems.
Recently Lindsay released an encoder option that allows for a retrofit to a Reinke or Valley collector
ring. This encoder fits on top of the system’s collector ring to determine position of the center pivot.
This is a low cost upgrade that allows you to use the latest in technology while saving on hardware.
To accommodate non-electric systems Lindsay has released a hydraulic system upgrade that allows
systems to capture and utilize precision encoders to perform multifunction tasks. This position upgrade adds a collector ring for power and an encoder to the center point.
GPS Precision Conversion
Use the power of global positioning to enhance any pivot system, no matter what the brand. The programmable controller knows the exact field position of the pivot allowing for precise control of water
and fertilizer application through end-guns or an entire bank of sprinklers maintaining maximum control over all areas of your field. The GPS Controller easily integrates with FieldBOSS and FieldVISION
controllers and Zimmatic FieldPLUS articulated pivots.
3
3
Conversion Upgrades for Competitive Brand Systems
Conversion Drive Train
Zimmatic machines incorporate the strongest, most reliable drive-train in the industry. The horizontal centerdrive design was pioneered by Zimmatic engineers and has
been further improved upon to provide the highest standard horsepower and torque
available in the market today. The powerful centerdrive is connected to the all new AT
gearbox. Designed to Zimmatic’s exact specifications, the AT gearbox incorporates the
latest in gearbox technology to withstand temperature and pressure using time tested,
high-strength internal components for trouble free operation. The combination of the
Zimmatic centerdrive and the AT gearbox allow your machines to power through the
toughest terrain, year after year.
Centerdrive
Aggressive environments demand rugged solutions and the Lindsay centerdrive utilizes key features to accomplish this. With a triple reduction spur gear design that results in less heat loss,
lower friction and overall wear the centerdrive provides power and energy savings.
Advanced Technology Gearbox
The all new AT gearbox incorporates proven components with cutting edge design. Using the industry’s largest expansion chamber to reduce internal pressure allows the seals in the AT gearbox, to keep
worm and bull gears lubricated so performance is at its best even in the harshest conditions. The
strength can be seen in the larger heat treated worm gear teeth for smooth starting and stopping of
the system.
Added Zimmatic Structure
Add the toughest structure to your Valley, Reinke or Lockwood.
Lindsay offers add on joints to attach a Zimmatic span to an existing span or pivot point. Lindsay also has adapter joints to replace
narrower pivot points with the sturdy Zimmatic wide base heavy
duty pivot point offering renewed life and additional strength
where it counts, at the pivot.
Zimmatic spans offer additional strength with a 15% thicker pipeline and wider tower structure. This allows for longer span life and
a more even load distribution into the pipeline. This added strength and durability leads to longer lasting spans in challenging terrain.
4
Conversion Upgrades for Competitive Brand Systems
Zimmatic Pivot Point
Replacing the pivot point is a good option when additional strength is
needed or the current pivot point has worn out. A Zimmatic pivot point
offers the widest base in the industry for more stability and strength. With
an easy to remove pivot riser gasket maintenance is simple. Zimmatic also
prides itself on an industry exclusive external collector ring which eliminates flow restriction from the riser pipe.
MAXfield II Corner
The MAXfield II has proven to be the industry leader in reliability and water
application uniformity. By utilizing a solid, hose-less joint, digital guidance,
durable steering and instant motion control technology this corner out
paces the competition. With immediate communication between the last
tower and the corner arm, the corner reacts on the go to changing field
conditions. In addition, the extension and retraction of the corner allows
the machine to cross the last wheel track adding more acres under irrigation.
Now existing Valley machine owners can benefit from the advantages of
the MAXfield II corner. A new high flow joint connection has been developed allowing the MAXfield II to bolt directly to a Valley 8000 or 6000 machine.
5
5
Conversion Upgrades for Competitive Brand Systems
Valley to Zimmatic Conversion
Available Upgrades:
√
√
√
√
Drive Train
Alignment Components
Tower Panels
Control Panel
√
√
√
√
Resolver to Encoder Conversion
Pivot Point
Span Joints
MAXfield II Corner add on to Valley
Drive train (Based on model year, see last page)
This package includes all hardware necessary to equip a Valley standard clearance non-towable tower structure with a Zimmatic
drive tube, center drive, and AT gearboxes.
Alignment Conversion (01-6806-0)
Includes mounting hardware, and alignment rod to convert any system to Zimmatic alignment
controls. These controls are perpendicular to the pipe providing a more precise and repeatable
alignment response than a parallel configuration like the original hardware uses.
Control Panel Mounting Hardware (01-6943-0)
Enables a GrowSmart control panel to be mounted onto an existing Valley pivot point.
NOTE: The control panel will have to be ordered separately. If a computer panel is selected a
position option (encoder or GPS) must also be ordered.
Resolver to Encoder Conversion (14-8203-0)
Allows an existing resolver to be changed to a magnetic encoder to provide position information
for a FieldVISION or FieldBOSS panel.
6
Conversion Upgrades for Competitive Brand Systems
Pivot Point Joint Adaptors
Zimmatic Pivot Point to Valley Span (14-1905-0)
Allows a standard clearance 6 5/8” diameter Zimmatic pivot point to connect to a Valley standard
clearance 6 5/8” span.
NOTE: A standard pivot point and Valley non-towable pivot pad anchoring must be ordered
separately .
Valley Pivot Point to Zimmatic Span (12-4603-0)
Allows a standard clearance 6 5/8” Valley pivot point to connect to a Zimmatic standard clearance 6 5/8” span.
Span Joint Adaptors
NOTE: Part number does NOT include alignment package. See Conversions tab of Aftermarket section in price book for more details.
Valley Span to Zimmatic Span (Pivot End) (12-6275-0)
Allows a 6 5/8” Zimmatic span to attach to the ball-and-socket joint on an existing Valley 6 5/8”
span.
Zimmatic Span (Tower End) to Valley Span (12-6289-0)
Allows a 6 5/8” Valley span to attach to an existing 6 5/8” Zimmatic span.
MAXfield II Adaptor Joint for Valley 6000/8000 systems
Harness the superior performance of a MAXfield 2 Custom Corner to your Valley 6000 or 8000 center pivot
Standard Spindle
√ 179’, 6 -5/8”, 88’ overhang for Valley
√ 201’, 6 -5/8”, 88’ overhang for Valley
Corner 4x4
√ 179’, 6 -5/8”, 88’ overhang with 4x4 for Valley
√ 201’, 6 -5/8”, 88’ overhand with 4x4 for Valley
NOTE: System must meet the minimum flow requirements electrical requirements and
slope limitations. See your dealership for this information. Buried wire should be included in your quote with this type of installation.
7
7
Conversion Upgrades for Competitive Brand Systems
Reinke to Zimmatic Conversion
Available Upgrades:
√
√
√
√
√
√
Drive train
Alignment Components/Tower Panels
Control Panel
Resolver to Encoder Conversion
Pivot Point
Span Joints
Drive train (Based on model year, see last page)
This package includes all hardware necessary to equip a Reinke standard clearance nontowable tower structure with a Zimmatic drive tube, center drive, and AT gearboxes.
Alignment Conversion (01-6813-0)
Includes mounting hardware, and alignment components to convert Reinke system to Zimmatic alignment controls.
Control Panel Mounting Hardware (01-6943-0)
Enables a GrowSmart control panel to be mounted onto an existing Reinke pivot point.
NOTE: The control panel will have to be ordered separately. If a computer panel is selected a
position option (encoder or GPS) must also be ordered.
Resolver to Encoder Conversion (14-9609-0)
Allows an existing resolver to be changed to a magnetic encoder to provide position information for a FieldVISION or FieldBOSS panel.
8
Conversion Upgrades for Competitive Brand Systems
Pivot Point
Allows a 6 5/8” Reinke span to attach to the octagon ring joint an existing 6 5/8” Zimmatic
span.
Pivot Point Joint Adaptors
Zimmatic Pivot Point to Reinke Span (14-7746-0)
Allows a standard clearance 6 5/8” diameter Zimmatic pivot point to connect to a Reinke
standard clearance 6 5/8” span.
NOTE: A standard pivot point and skid, non-tow pivot pad anchoring must be ordered
separately .
Reinke Pivot Point to Zimmatic Span (13-9333-0)
Allows a standard clearance 6 5/8” Reinke pivot point to connect to a Zimmatic standard
clearance 6 5/8” span.
Span Joint Adaptors
NOTE: Does NOT include an alignment package.
Reinke Span to Zimmatic Span (Pivot End) (13-9272-0)
Allows a 6 5/8” Zimmatic span to attach to the hook-and-eye joint on an existing Reinke 6 5/8” span.
Zimmatic Span (Tower End) to Reinke Span (13-9271-0)
Allows a 6 5/8” Reinke span to attach to the octagon ring joint on an existing 6 5/8” Zimmatic span.
9
9
Conversion Upgrades for Competitive Brand Systems
T & L to Zimmatic Conversion
Available Upgrades:
√
√
√
√
√
Drive train
Alignment Components/Tower Panels
Control Panel
Collector Ring
Encoder (FieldVISION or FieldBOSS)
Drive Train
(Based on model year, see Conversion Parts Summary, page 13)
This package includes all hardware necessary to equip a T & L standard clearance nontowable tower structure with a Zimmatic drive tube, center drive, and AT gearboxes for a
hydraulic-to-electric conversion of the machine.
Alignment Conversion (01-6807-0)
A retro fit alignment kit fits directly onto existing T&L structures. This kit includes mounting
hardware and alignment components to convert a T&L system to Zimmatic alignment controls after an electric conversion is complete.
The Zimmatic alignment offers precision movement of the T&L so the system maintains the
same straight position around the field.
10
Conversion Upgrades for Competitive Brand Systems
T&L Control Panel Mounting Hardware (Electric Conversion)
Panel Mount Kit (01-6944-0)
The conversion kit allows for a GrowSmart panel to mount onto a T&L pivot point with all the
required mounting hardware.
GrowSmart Panel
If a computer panel is selected, the panel must be ordered separately with either an encoder
or GPS.
Collector Rings
To provide power for the system, Collector rings must also be installed.
There are 3 options for the T&L system.
1.
T&L pivot that wrap hose around the elbow (01-7030-0): This kit will include the
new collector ring, encoder, conduit and packing glands for the mounting of the
encoder. Allows a collector ring to be installed on a T&L pivot point which currently only has hydraulic hose wrapped around the pivot point during operation.
2.
T&L with the swivel kit (01-7031-0): This will have the encoder cable and mounting hardware. Allows collector ring to be installed on a T&L pivot point which
currently utilizes a swivel for hydraulic drive.
3.
Encoder Upgrade Kit (14-8203-0): (Only for use with FieldVISION or FieldBOSS
panels): Provides position information for end gun tables and programming features that are available with FieldVISION or FieldBOSS panels. Must accompany a
collector ring upgrade.
11
11
Conversion Upgrades for Competitive Brand Systems
Lockwood to Zimmatic Conversion
Available Upgrades:
√ Alignment Components/Tower Panels
√ Control Panel
√ Span Joints
Alignment Conversion (01-6813-0)
Includes mounting hardware, and alignment components to convert Lockwood system to
Zimmatic alignment controls.
Control Mounting Hardware (01-6945-0)
Use the GrowSmart controls to offer the latest technology on the aging system.
With the panel kit a panel will need to be ordered.
Span Joint Adaptors
NOTE: Part number does NOT include alignment package.
Lockwood Span to Zimmatic Span (Pivot End) (14-3430-0)
Allows a 6 5/8” Zimmatic span to attach to the hook-type joint on an existing Lockwood 6 5/8” span.
Zimmatic Span (Tower End) to Lockwood Span (14-3432-0)
Allows a 6 5/8” Lockwood span to attach to the octagon ring joint an existing 6 5/8” Zimmatic span.
12
Conversion Upgrades for Competitive Brand Systems
Conversion Part Summary
Valley
Reinke
T&L
Lockwood
Gifford-Hill
Alignment
01-6806-0
01-6813-0
01-6807-0
01-6813-0
01-6813-0
Panel Mounts
(mounts only)
01-6943-0
01-6943-0
01-6944-0
01-6945-0
-
Resolver to Encoder
Conversion
14-8203-0
14-9609-0
(Order with a
T&L collector ring)
14-8203-0
01-7030-0 (Wrap)
01-7031-0 (Swivel)
Collector Ring
(Valley Span to
Zimmatic Span)
(Reinke Span to
Zimmatic Span)
(Zimmatic Span to
Lockwood Span)
12-6275-0
13-9272-0
14-3430-0
(Zimmatic Span to (Zimmatic Span to
Valley Span)
Reinke Span)
Tower Adapter
Joints
Gearbox
Drive Train
Conversion
12-6289-0
13-9271-0
(Valley Pivot Point (Reinke Pivot Point
to Zimmatic Span) to Zimmatic Span)
12-4603-0
13-9333-0
(Zimmatic Pivot
(Zimmatic Pivot
Point to Valley
Point to Reinke
Span)
Span)
14-1905-0
14-7746-0
06-4713-1
-
Valley
Reinke
(Non-Tow,
No Offset)
01-2846-2
01-2847-0
(Present Day
Design)
01-5519-0
(1970 - About
1980)
01-5629-0
Lockwood
01-5526-0
Kroy
01-2861-1
(Offset Holes)
(Zimmatic Span to
Lockwood Span)
-
14-3432-0
-
-
-
T&L
(1998 - Present)
01-5630-0
(1990-1997)
-
Gifford-Hill
(1980’s Round
Tube & 1970's,
Square Tube)
-
Hygromatic
('73, Non-Tow)
01-2849-6
('76, Non-Tow)
01-5443-0
01-2851-2
01-2850-4
Olson
01-2843-9
Sargent
01-5527-0
Wade Rain
01-2844-7
13
13
Conversion Upgrades for Competitive Brand Systems
Summary
Lindsay has over 50 years of irrigation experience and continues to push both technological irrigation advancements
and structural enhancements. A worldwide leader in agricultural irrigation in all terrains and operating conditions,
GrowSMART controls have given efficient irrigation results with uniformity unmatched by anyone today.
For more information on how to incorporate this technology and these controls into your operation please visit your
local Zimmatic dealer.
The trademark Zimmatic is owned by Lindsay Corporation. All other trademarks are the properties of their respective owners, and
are referred to solely for informational purposes. No affiliation, endorsement or connection between the owners of these trademarks and Lindsay Corporation, or any of its affiliates, is implied or should be inferred from such references.
Copyright 2011 Lindsay Sales & Service, LLC.
14