SNOW BLOWER

SNOW BLOWER
Model 3200A
“ For equipment that moves snow” Since 1927
Loader Mounted Self Powered Snow Blower
SPECIFICATIONS
CAPACITY
AUGERS
Up to 2,000 imperial (1,814 metric) tons per hour
depending on snow conditions
Two horizontally mounted, 20 inch (50.80 cm) diameter
Flights 3/8 In. (9.53 mm) thick
WEIGHT AND DIMENSIONS
IMPELLER
Overall height (less chute)
Overall height (with chute)
Overall width
Working height
Weight
36 inch (91 cm) diameter, 5 easily replaceable blades
Casting distance 15 ft to 115 ft (4.6 m to 35 m)
66” (168 cm)
145” (368 cm)
109” (277 cm)
50” (127 cm)
9,600 lbs. (4,354 kg)
IMPELLER CASING
Circular wall 3/8” (9.53 mm) thick, hydraulic rotation
ENGINE
SPOT CASTING CHUTE
250 hp (186 kW) to 260 hp (194 kW) diesel engine
2 piece, telescopic, 220 degree rotation, with in cab control
BLOWER DRIVE SYSTEM
REMOTE CONTROL BOX
Mechanical drive with Twin Disc over-center type clutch
Reduction gear box and chain case both fully enclosed, and oil
bath lubricated.
Separate shear bolt protection for impeller and augers.
CARRIER REQUIREMENT
Cab mounted with control cable
Includes tachometer and function control switches
A front end wheel loader with SAE rated 19,200 lbs. (8,709 kg)
minimum tipping load capacity at full turn
SICARD
P.O. Box 171 Watertown, NY 13601-0171
Tel.: (315) 786-7669 Toll Free: (877) 742-2732 Fax: (315) 788-3750
Internet: www.sicard-snowblast.com E-mail: sicard@sicardgroup.com