NEW Centron brochure

Corrosion Resistant Fiberglass Piping Systems
For Oil & Gas Applications
Headquartered in San Antonio, Texas, NOV Fiber Glass Systems is the leading worldwide manufacturer of
fiberglass reinforced epoxy (GRE) products used for onshore and offshore corrosion control. NOV Fiber Glass
Systems brings over 60 years of experience in both the low and high pressure segments of the onshore oil
and gas market, offering the most highly recognized and respected brands in the industry.
CENTRON™ fiberglass piping is a product leader for FGS in the oil and gas market, having met the needs
and requirements for installations from the harsh deserts of Africa to the freezing cold climate in Siberia.
Available in a variety of diameters and a choice of joining systems, CENTRON products can fulfill your
requirements for many applications.
Line Pipe
Standard and API Design
CENTRON line pipe (CEN) used for oil and gas
production is manufactured in sizes ranging from
2” through 4” (50 to 100 mm) diameters and will
handle pressures from 500 psi (3,44 MPa) to 800
psi (5,5 MPa) and temperatures up to 210º F
(99º C).
This line pipe product is used in lower
to medium pressure oil and gas flow lines where
corrosive flows are encountered. CENTRON high
pressure products (SP/SPH) are typically used to
transport highly corrosive produced water and CO2
gas from an oil field’s central station to injection
wells.
The epoxy resin systems offered are
aromatic amine and anhydride and each provides
different chemical resistance and temperature
Applications
performance. Fiberglass reinforcement provides
•
•
•
•
•
•
•
•
•
•
•
•
the structural strength. NOV Fiber Glass Systems
line pipe is manufactured to a minimum design
life of 20 years at rated temperature and pressure
according to ASTM D2992 Procedure B and
industry standards, such as API 15 HR and 15 LR.
Gas Gathering or Injection Lines
Chemical Disposal Lines
Flow Lines
Mine Acid Lines
Recirculating Lines
Salt Water Lines
Solution Mining Lines
Supply Lines
Transport Lines
Water Processing Lines
CO2, H2S
Coal Bed Methane
Benefits
• Excellent corrosion resistance
and long service life
• Exceptional pressure and axial
load capabilities
• Low installation costs
• Superior flow characteristics
• Low paraffin and scale build-up
Line Pipe Products & Connections
PRODUCTS
CONNECTION
SIZE RANGE
PRESSURE
TEMPERATURE
Centron SP/SPH High Pressure Line Pipe
Mechanical O-Ring
(4 threads per inch, sealing thread)
1½” - 10”
(40-250 mm)
400-3500 psi
(2,7-24,1 MPa)
Up to 210°F (99°C)
Mechanical O-Ring
(4 threads per inch, non-sealing thread)
2”-4”
(50-100 mm)
500-800 psi
(3,5-5,5 MPa)
Up to 210°F (99°C)
Bell & Spigot (Matched Taper)
2”-16”
(50-400 mm)
150-450 psi
(1,0-3,1 MPa)
Up to 210°F (99°C)
Centron CEN
Bondstrand
Centron Surface Pipe (SP/SPH) is a 4-thread per inch pattern that, in addition to being a
sealed thread, also incorporates a self-contained, restrained O-ring seal for added reliability.
This exceptionally user friendly connection is used in high pressure applications up to 3500 psi
and 210°F.
Centron CEN is also a coarse 4-thread per inch pattern that seals exclusively with a selfcontained, restrained O-ring seal.
It is used primarily in low pressure flow line or transfer
applications in pressures from 500-800 psi and temperatures up to 210°F
Bondstrand 3000, 3200, and 3300 series piping are manufactured using aromatic amine or anhydride cured
epoxy. They are recommended for general service up to 210°F (99°C). The 3000 series pipe is available in 2”16” diameters with pressure ratings up to 450 psig depending on diameter. The 3200 and 3300 series pipe are
available in 8”-16” diameters with pressure ratings of 200 and 300 psig, respectively.
Downhole Tubing and Casing
Integral Joint / Threaded and Coupled
Centron Fiberglass Tubing / Casing
NOV Fiber Glass Systems is the leading downhole
GRE producer in the industry due to its unique zero
degree fiberglass layering sequence, which provides
superior tensile performance. Tubing is offered in
1½” to 4½” diameter (40 to 115 mm) with pressure
rating from 1000 to 3500 psi (6,9 to 24,1 MPa).
Casing products range in size from 4½” through 95/8”
diameter (115 mm - 250 mm) with pressure ranges
from 650 to 2500 psi (4,5 - 17,2 MPa).
FGS offers GRE downhole tubing and casing
products produced with two distinct curing agents
that withstand temperatures up to 210ºF (99ºC). All
products come in standard nominal joint lengths of
30 ft. (9,0 m). The company’s downhole products are
used in a variety of highly corrosive applications such
as saltwater and CO2 injection wells due to corrosive
nature of injection fluids, in observation wells for
monitoring formations where steel can interfere with
monitoring equipment, and in producing wells where
steel products corrode easily.
Applications
• Wells: Production/Injection/Salt Water Disposal
Chemical Disposal/Water Source/Monitoring
• In-situ Solution Mining
• Coal Bed Methane
• Liner for Corroded Steel Casings
• Observation Well Casing
• Open Hole Casing, Zone or to Surface
Improved Downhole Make
& Break Performance
Centron Carbon Fiber Threaded Tubing
Tubing provides less breakout torque, less thread
wear torque, less thread wear and higher thread
shear.
Superior downhole performance
Unique axial and balanced reinforcement
Joining Systems
NOV Fiber Glass Systems offers adapters to match
the industry standard API 5B EUE 10rd, EUE 8rd and
OD 8rd steel compatible joining systems. The coarse
4-thread per inch plus O-ring seal connections
are available either Threaded and Coupled (T&C)
or Integral Joint (IJ). The joining system is a critical
consideration
in
determining
GRE’s
relative
performance versus steel products. It impacts the
number of times a string of tubing can be “tripped” in
and out of a well, as well as the speed of installation
and compatibility with other products.
Centron Downhole Tubing (DHT) is designed and manufactured with enhanced axial tensile strength and
modulus. Centron Tubing is the perfect choice for demanding high pressure and deep well applications.
Downhole Light Duty is designed for coal bed methane and other open-hole applications. Large diameters
are available on request.
Centron Downhole Casing (DHC) has an exterior surface giving superior cement bonding that satisfies the
most demanding environmental requirements without incurring additional cost of rough coating. DHC is
availble in 4½ - 10¾ inch diameters with pressure ratings from 650 to 2500 psi.
Downhole Systems
PRODUCTS
SIZE
PRESSURE
TEMPERATURE
Centron DHT (Downhole Tubing)
1½”-4½”
(40-115 mm)
3500 psi
(24,1 MPa)
Up to 210°F
(99°C)
Centron DHC (Downhole Casing)
4½”-9 5/8”
(115-250 mm)
2500 psi
(17,2 MPa)
Up to 210°F
(99°C)
Service
Field support during the installation of the product is an
integral part to ensure the reliability and long-term, worryfree performance of your piping system. NOV Fiber Glass
Systems offers complete training and inspection service
for all products throughout the world. The presence of
trained personnel at the job site helps assure a successful
installation.
Quality
The NOV Fiber Glass Systems commitment to quality
extends throughout the company and supplier network.
All products are closely monitored during production
and thoroughly tested. Quality standards are strictly
enforced and reinforced with production employee
incentives and quality audits. Third party inspections
are a normal occurrence at NOV Fiber Glass Systems.
The API Q1 Quality Rating is a requirement to apply
the API Monogram for Standards 15HR and 15LR. The
quality and performance requirements of API assure the
customer that, not only do we have a quality system,
but they also receive a product qualified and approved
Certifications and
Approvals
for performance standards. Our adherence to this
internationally recognized quality system is another
indication of our commitment to our global role as a
manufacturer of the highest quality fiberglass tubulars.
NOV Fiber Glass Systems’ Quality System is registered
by DNV to conform to ISO 9001 requirements. Products
also comply with CSA Z662 (Canada), AS2885 (Australia)
and other standards.
Awarded the FIRST API
Q1 and API 15HR approval
for the manufacture of high
pressure fiberglass pipe.
SALES OFFICES
United States
San Antonio, Texas
Oilfield Products
Phone: 210 477 7500
Little Rock, Arkansas
C&I/Fuel Handling Products
Phone: 501 568 4010
Burkburnett, Texas
Marine Offshore & Fuel Handling
Phone: 940 569 1471
Headquarters
Downhole Solutions
Middle East
Dubai, United Arab Emirates
Phone: 971 4 886 5660
Asia, Pacific Rim
Singapore
Phone: 65 6861 6118
Harbin China
Phone: 86 451 8709 1718
Shanghai, China
Phone: 86 21 5888 1677
Mineral Wells, Texas
Centron Products
Phone: 940 325 1341
Suzhou, China
Phone: 86 512 8518 0099
Houston, Texas
Fiberspar Products
Phone: 713 849 2609
Europe, Africa, Caspian
Geldermalsen, The Netherlands
Phone: 31 345 587 587
Johnstown, Colorado
Fiberspar Products
Phone: 970 578 2000
Canada
17115 San Pedro Avenue Suite 200 Use U.S.A. Contacts
San Antonio, Texas 78232 USA
Phone: 210 477 7500
Mexico, Caribbean,
Central America
Use U.S.A. Contacts
Drilling Solutions
MANUFACTURING
FACILITIES
Burkburnett, Texas, USA
Engineering and Project Management Solutions
Lifting and Handling Solutions
Mineral Wells, Texas, USA
Little Rock, Arkansas ,USA
San Antonio, Texas, USA
Sand Springs, Oklahoma, USA
South America
Recife, Pernambuco, Brazil
Phone: 55 81 3501 0023
Wichita, Kansas, USA
Central Asia / Russia
Aktau, Kazakhstan
Phone: 7 701 5141087
Betim, Brazil
Johnstown, Colorado, USA
Houston, Texas USA
Production Solutions
Recife, Brazil
Harbin, China
Suzhou, China
Malaysia
Singapore
Sohar, Oman
Supply Chain Solutions
Tubular and Corrosion Control Solutions
National Oilwell Varco has produced this brochure for general information only, and it is not
intended for design purposes. Although every effort has been made to maintain the accuracy and
reliability of its contents, National Oilwell Varco in no way assumes responsibility for liability for any
loss, damage or injury resulting from the use of information and data herein. All applications for the
material described are at the user’s risk and are the user’s responsibility.
All brands listed are trademarks of National Oilwell Varco.
Well Service and Completion Solutions
One Company . . . Unlimited Solutions
fgspi pe@no v. com
w w w. f g s p i p e . c o m
© 2013 National Oilwell Varco. All rights reserved.
OG1020 June 2014