outdoor CoCkpit

Cockpit
outdoor
Roadbooks
from page 1016
Rallye-Computer
from page 1021
Adapter
from page 1028
Equipment
from page 1026
1016
Roadbook RB-TT *MvG*
For the first time ever, step motors are being used in this new Roadbook holder.
Using an intelligent control that recognises the entire length of the Roadbook and the position
(beginning ... end), these step motors are controlled in normal operation to ensure that an even
feeder speed is achieved for the Roadbook.
However, much higher step motor revolutions are used for fast rewinding. A quick press of the remote
control moves the Roadbook forward by one picture; the picture height can be set between approx. 50
and 1 00 mm. This greatly increases the safety, since the rider is not so distracted when moving on to
the next picture. The Roadbook lighting adapts automatically to the prevailing light conditions.
Features at a glance:
- Step motor drive with standstill brake
- Remote control and manual operation
- Movable tension pulley with non-contact sensor for consistent paper tension
- Feed speed not dependent on the diameter of the winding roll
- Single-image feed with adjustable picture height
- Lighting adapts automatically to the brightness of the surroundings
- Integrated writing base for subsequent lettering of the Roadbook
- Tremendous capacity of to 80 sheets of DIN A5 (to approx. 1 7 m)
- Housing dimensions (l x w x h) 207x1 51x 83,5 mm
020-0012
Cockpit
RB-TT
We used our many years of experience to design
our roadbook holder. It features a unique „DOUBLE
MOTION drive“ which means that two motors
control paper movement. The paper is always
tightened and cannot unwind even with strong
vibration. We deliberately decided not to use rubber
driving belts which are prone to ageing and cracks.
We have chosen a direct drive instead.
The RB-TT standard package includes a lighting
kit and handlebar control. The roadbook holder is
easy to mount and the electrical connections are
simple. Just connect two cables to the power supply.
Then plug in the handlebar control. The handlebar
bracket is pre-assembled and is rubber mounted.
Different mounting plates are available for mounting
a trip computer with or without control lamps.
- Aluminium housing
- Reinforced edges for high stability
- Waterproof
- For A5 roadbooks
- Lighting included
- Housing dimensions: (L x W x H) 197x124x70mm
- Electrical drive incl. paper brake
- Manual operation possible
- Includes handlebar control
- Opens and closes with no tools
- Extra large paper roll: up to 80 A5 sheets
(approx. 17m)
- Weight: 1000g incl. mount
020-0010
1017
1018
RB-01
Features:
- Waterproof
- Cover closes and opens without tools
- Large viewing area
- Rubber belt drive prevents the paper roll from
unwinding, drives both paper rollers
- High-quality aluminium
- Plastic-axle bearings
- Rugged Macrolon front cover A5 roadbooks
or smaller
- Large knobs for easy and precise operation
- Two mounting clamps for secure fasting to
handlebars
- Weighs just 500 g (without mount)
190 mm x 130 mm x 65 mm
021-0010
Roadbook Lighting
Lighting for all standard roadbook holders.
Voltage supply from motorcycle‘s electrical system
- Very bright, constant backlighting
- Extremely flat (just 2.5 mm); diameter of paper roll
not restricted
- Tested at the most demanding rallyes world-wide
- Easy to mount
- Dimensions: 100 mm x14 mm or 60 mm x 14 mm
- Includes installation hardware,
- Connectors etc.
025-0021 (100 mm)
025-0020 (60 mm)
RB-compact
The Roadbook holder for touring riders!
Rallyists have used roadbook holders for years.
More and more touring riders also want to benefit
from notes that appear by simply turning a knob“.
Rally roadbook holder are often too big. Many
motorcycles do not have enough space or the
rider cannot see the instruments. There is a small
roadbook holder available: the RB compact.
Cockpit
- Including fixing materials for handlebars with crossbar (012mm);
- Also RB compact with clamp for fitting directly onto a 0 22mm handlebar tube.
- For all kind of notes
- Dimensions: RB-compact: 90 x 1 30 x 40; RB-XL 245 x 1 30 x 55 mm
- Paper width up to 60mm (RB-compact) or 21 0 mm (RB-XL)
- Waterproof
- Rugged aluminium housing
- Front cover opens and closes without tools
- Manual operation
- Belt-driven paper brake to prevent the paper roll from unwinding
- For use on all types of motorcycles
- Optional green, energy-saving LED lighting
- Devise your own route plans (roadbooks)!
RB-XL
The roadbook holder in A4 format!
This means you don‘t have to cut maps to size
and write on narrow continuous paper rolls. And
so, for example, you can also insert the A4 printout from your route planning software directly
into the roadbook holder.
020-0030
025-0021
020-0020
025-0030
025-0020
025-0025
Roadbookholder RB-XL
Lighting 100 mm
Roadbookholder RB-compact
Paper roll 60mm
Lighting 60mm
Adapter plate „DR“ RB-compact
1019
1020
FB-Rallye for RB-TT Roadbook Holder
- Anodised, CMC machined aluminium housing
- Matches FB-Rallye IMO remote
- Recessed keys
- Large keys for forward/backward transport
- Precise keys with gold contacts
025-0015
Paper roll 150 mm
025-0031
Roadbook forms (150mm pad)
for RB-TT, RB-01, RB-MD
025-0032
Spare cover RB-compact
025-0041
Spare cover RB-TT
025-0040
Spare cover RB-TT carbon
025-0140
Spare cover RB-01/RB-MD
025-0042
We offer a wide range of accessories and spare
parts for all our roadbook holders.
We cannot list the whole range in this catalogue
due to the variety of parts in stock.
If you do not see the spare part you need, just
give us a call. Or send an e-mail to
info@touratech.com.
Spare belt kit RB-01
025-0052
Spare belt kit RB-compact
025-0050
1021
Cockpit
OVERVIEW
TOURATECH motorcycle computers come in four different models. The computers mainly differ in functionality. The IMO-100R50 Rallye also features a different housing. The computers thus cover various fields of
use.
All of TOURATECH‘s motorcycle computers boast the following functions:
- German TUV Type Approval, can be used as replacement instrument
- Illuminated display and keys
- Maximum speed up to 500 KMH
- Maximum weight just 250 grams (without mounting bracket)
- Connection to 12V system (direct voltage +/-25%) (not IMO-100R50 Rallye;
- Low current consumption (approx. 100mA)
- No current consumption when ignitionis off
- Dimensions: 120 x 80 x 34 mm (execpt IMO-100R50 Rallye)
- Waterproof (IP 65) and resistant to vibration
- Internal battery-driven clock (battery life min. 5 years)
- Dual data integrity through non-volatile semi-conductor memory (min. 100 years)
The following table summarises the host of functions:
Function
IMO-100R50
IMO-100R
IMO-100R300
Rallye
Speedometer
Yes
Revcounter (digital)
Yes
Yes
Yes
Yes
Yes
Yes
Revcounter (analogue)
Yes
Gearchange light (adjustable)
Clock
Yes
Yes
Yes
Date
Yes
Yes
Yes
Yes
Yes
Odometer (total)
Yes
Yes
Yes
Rally function (stage)
Yes
Yes
Yes
Yes
Yes
Yes
Rally function (total distance)
Short distance with driving and break times, average
speeds
Daily trip recorder with driving and break times and
average speeds
Long distance recorder for up to 365 days (diary
function)
YES, but no
average values
Yes
Yes
Yes
covered, driving time, and average speed
and arrival time
Yes
Yes
Lap recorder for up to 300 laps including distance
Distance to destination including remaining driving time
IMO-100R
Sport
Yes
Yes
Distance between fills, consump. calc.
Yes
Accelerometer (adjustable)
Yes
Yes
Maximum speed
Yes
Yes
Stop watch
Yes
Yes
Outdoor thermometer w. MIN/MAX memory
Yes
Engine data incl. motor temperature and battery voltage
Yes
Yes
1022
IMO-100R50 Rallye
The new rallye computer!
The IMO-100R50 Rallye is the new rallye computer from TOURATECH.
It combines the tried and tested rallye functions of the IMO-100R with very small dimensions (93 x 57 x
33 mm). The IMO-100R50 Rallye has a robust, waterproof aluminium housing.
Although it has been conceived as rallye computer, it can be used as replacement instrument (German TUV Type Approval).
The IMO-100R50 Rallye easily connects to your motorcycle‘s electrical system. It accepts 6 to 30 volts Ac
or DC supply. A magnet for the wheel, and the wheel sensor are included. An optional handlebar remote
control can be plugged into the IMO-100R50 Rallye directly.
The Rallye IMO-100R50 allows you to
switch between two different display
modes:
Speedo mode with daily trip odometer Simultaneous
display of:
- Speed
- Daily trip odometer
- Time of day
- Odometer
Rallye computer mode Simultaneous display of:
- Total distance covered, can be edited via remote
control in steps of 10m, 50m or 100m or be
edited
at IMO-100R50 Rallye directly using.
- Partial distance (stage) can be reset via remote
control or at IMO-100R50 Rallye directly
- Time of day
- Total distance covered or stage with large or small
display
011-0401
Cockpit
1023
IMO-100R300
The rallye computer IMO-100R300 is TOURATECH‘s high-end device. It features the same basic functions
as the IMO-100R, but offers a host of additional features.
- For use on all types of motorcycles with alternater or generator system (with or w/o battery)
- Simple to fit
- Provides a lot of information and has many functions
- Replaces nearly all standard instruments
- For use as „replacement instrument“
- Time of day, date
- Speedometer and rev counter (simultaneous display)
- Display of total distance travelled up to 999 999 (editable)
- Fuel consumption calculator and distance covered between fills
- Daily trip recorder incl. Average speed (with and w/o break times)
- Trip distance recorder incl. Average speed (with and w/o break times)
- Outdoor thermometer with storage of minimum and maximum temperatures
- Display of motor temperature
- Countdown tripmeter showing distance to destination incl. arrival time and time to destination
- Long distance recorder stores daily distances covered for up to 365 days (automatic)
- Memorises maximum speed
- Battery voltage indicator incl. generator monitoring
- Package includes all sensors and cables
- An adapter may be necessary for installing the motor temperature sensor.
- Accessories can be found on the following pages
The „ + „ version of the IMO-100R300 can be fitted to motorcycles with 6 volt or AC (w/o battery) systems.
It is equipped with an integrated regulator/rectifier. On the „+“ version the battery voltage indicator will
display 1 1.5 V at all times.
012-0011 (IMO-100R300) English Version
012-0111 (IMO-100R300“+“) English Version
1024
IMO-100R
Rallye computer & Replacement instruments.
The IMO-100R is a complex electronic instrument that is mounted to your motorcycle. It either replaces
the standard instruments or is mounted in addition to the original cockpit.
It features different odometers that you can use in conjunction with tour directions and roadbooks.
The rally computer IMO-100R has been tested successfully at the most demanding rallyes world-wide.
The IMO-100R allows you to switch between two different display modes:
Simultaneous display of:
- Speed
- RPM
- Time of day
- Odometer
- Simultaneous display of:
- Total distance covered, can be edited via remote control in steps of 10m, 50m or 100m
(also with remote control)
- Partial distance (stage) can be reset (also with remote control)
- Time of day
- Total distance covered and stage distance with large or small display.
- The odometers can be used as short distance or daily trip recorders.
The „ + „ version of the IMO-1 OOR can be fitted to motorcycles with 6 Volt or AC (w/o battery)
systems. It is equipped with an integrated regulator/rectifier.
011-0011 (IMO-100R) English Version
011-0111 (IMO-100R „+“) English Version
Cockpit
1025
IMO-100R Sport
The motorcycle computer for enduro and road racing
- For use on all motorcycles with alternator or
generator (with or without a battery)
- Simple to fit
- Provides a lot of information and has many
functions
- Can be used as a replacement instrument
- Replaces nearly all standard instruments
- Memorises maximum speed
- Battery voltage indicator with charge rate warning (N/A on “+” version)
- Motor temperature indicator with warning function
- Countdown tripmeter showing distance to destination incl. arrival time and time to destination
- Lap recorder stores up to 300 laps including distance covered, driving time, average speed and lap time
- Accelerometer
- Switchable basic display:
- RPM large digits
- Speedo large digits
- RPM analogue
- Accessories can be for and on the following pages
The IMO-100R Sport is the ideal choice for the IGE 3-hour enduro championship or similar enduro races.
When used in combination with a handlebar control (see next pages), the driver can always display the
current lap time incl. average speed as well as the number of laps. The stop watch also helps you control
the remaining race time. By using the memory function for storing lap times (up to 300) you can analyse
your performance after the race. The „+” version of the IMO-100R can be fitted to motorcycles w/o
battery or motorcycles with 6 volt systems. It is equipped with an integrated regulator/rectifier. On the “#”
version the battery voltage indicator will display 11.5 V at all times. Please state the required final RPM
value (analogue display) when ordering. You have the choice between 12,800 RPM and 15,600 RPM.
013-0011 (IMO-100R Sport)English Version
1026
FB-PRO Handlebar Control
- For all IMO computers
- Mounted on handlebars
- Plugs into IMO computer
- Rallye function control
- Used to select and reset functions on
IMO-100R300 and IMO-100R Sport
- Aluminium housing
- Replaceable protective caps
- Three keys
- Very small
Handlebar control FB-PRO
015-0020
Handlebar control FB-PRO 50R
015-0025
Sensor Mount Assembly
- For fitting IMO sensor to upside-down forks
(e.g.WP)
- Sensor protection
- Rugged mount
- Special magnet mount
- Mounts onto hub
015-0033 WP Fork 1997 and newer
015-0030 IMO Standard
FB-RALLYE Handlebar Control:
- For all IMO computers
- Mounted on handlebars
- Plugs into IMO computer
- Rally function control
- Used to select and reset functions on IMO100R300 and IMO-100R Sport
- Extra large and rugged keys
Handlebar control FB-Rallye IMO
015-0022
Handlebar control FB-Rallye 50R
015-0026
FB Rallye 5
Remote handlebar control for Tripmaster and RB-TT
roadbook holder:
Aluminium housing for handlebars with a diameter
of 22 mm Width of housing 22 mm
3 red waterproof switches to operate the IMO:
Resetting sections and correcting the total distance
forward and backward.
2 blue waterproof switches to operate the roadbook
holder: Winding the roadbook forward and
backward.
015-0027
015-0129 for IMO-100R50
Cockpit
FB Rallye 7
Seven functions:
1 high-quality toggle switch to operate the NAV
Assistant (setting the course)
1 high-quality toggle switch to operate the
roadbook (forward/backward) (RB-TT only)
3 red waterproof switches to operate the IMO:
Resetting sections and correcting the total distance
forward and backward
Aluminium housing for handlebars with a diameter
of 22 mm Width of housing 22 mm
015-0028
015-0130 for IMO-100R50
Carimpuls Pulse Splitter
In order to determine the speed with our IMO range
a magnet is fitted to one of the wheels and a sensor
counts the revolutions. Particularly with cars it is
difficult to find a good place on the wheel for the
magnet and the sensor and, for example, the drive
shaft is once more placed underneath up to the
wheel and there are „too many“ pulses per wheel
revolution. Even with quads the wheel size can be
too small to set it on the IMO. We have designed a
pulse splitter for these problems. You can use this
to reduce (split) the pulses by factors of 2, 4, 8 and
1 6. This pulse splitter is simply connected to the
sensor lead, the split factor is set and there you are
with the right speed on the display even though the
number of revolutions on the drive shaft, for example, is twice as many as the wheel revolutions.
015-0068
Power Converter
- Sports, off-road and racing bikes often feature a
stripped electrical system to reduce weight.
- We offer a power converter that can be retrofitted
which is a control, rectifier and capacitor unit.
- This unit is required to operate the standard IMO
computer as well as the electrical roadbook
holder.
- Weight: just 45g
- Input voltage: 4.5 - 40 V DC or max. 25 VAC
- Output voltage: 12 V DC, max. 200 mA
030-0020
1027
1028
Adapter plate L-I-K
Adapter plate L-I-KS
Adapter plate RB-I
For mounting an IMO computer
and a STD control lamp to the
handlebars or handlebar brace
(crossbar). Includes three clamps
and a rubber mount.
For mounting an IMO computer
and a SPORT control lamp to
the handlebars or fairing.
Includes three clamps and a
rubber mount.
For mounting an IMO computer
and an RB-TT roadbook holder.
Includes screws and four
vibration-isolating rubber
mounts.
040-0010
040-0019
040-0011
Adapter plate RB-I-K
Adapter plate RB-MDIMO
Adapter plate RB-TT-ICO
For mounting an IMO computer
and a control lamp kit STD to
the RB-TT roadbook holder.
Includes screws and four
vibration-isolating rubber
mounts.
For mounting an IMO computer
to the RB-MD roadbook holder.
Includes screws and four vibration-isolating rubber mounts.
040-0012
040-0014
For mounting an ICO rallye
computer to the RB-TT roadbook
holder.
040-0013
1029
Cockpit
Adapter plate RB-I50-X2
Adapter plate RB-150
Adapter plate RB-I50-KS
For mounting two IMO-100R50
Rallye computers to the RB-TT
roadbook holder. Includes
screws.
For mounting an IMO-100R50
Rallye to the RB-TT roadbook
holder.
Includes screws.
For mounting an IMO-100R50
Rallye and a SPORT control
lamp to the RB-TT roadbook
holder. Includes screws.
040-0113
040-0111
040-0112
Adapter plate
JM GPS II/III/V - IMO
For mounting GPS ll/lll to the
IMO
025-0027
1030
Gearchange Light
For connection to IMO-100R SPORT.
- Very bright orange LED, diameter 10 mm
- Mounted to fairing or handlebars (installation
hardware included)
- Anodised aluminium housing
- Pre-mounted connector for IMO-100R SPORT
The gearchange light has been designed for use
on the race track only and should not be used on
public roads as it may dazzle other road users.
030-0040
Xpol Superseal Connector
Using these connectors you can create a waterproof
connection to X poles. The set consists of the plug
housing, crimp contacts and seals. These
connectors were developed forairbag systems and
are still used for this because they are very strong.
015-0079
015-0080
015-0081
015-0082
(1
(2
(3
(4
pol)
pol)
pol)
pol)
Dummy plug for 2pol superseal connector
015-0078
1031
Cockpit
25 mm
Handlebar Clamps
1) 040-0042 (25 mm)
2) 040-0040 (22 mm)
3) 040-0041 (20 mm)
Rubber Mounts
4) 040-0030
5) 040-0031
22 mm
1
12 mm
2
4
3
5
Durchmesser 25 mm,
20 mm hoch,
Außengewinde M6
Durchmesser 15 mm,
8 mm hoch,
Außengewinde M4
Temperature Sensor Adapters
1)
2)
3)
4)
5)
6)
7)
015-0055
015-0054
015-0053
015-0052
015-0051
015-0050
015-0056
(inside thread M10x1,0)
(inside thread M10x1,0)
(inside thread M10x1,0)
(inside thread M10x1,0)
(inside thread M10x1,0)
(inside thread M10x1,0)
M24 x 2.0 F650GS
1.
2.
3.
4.
5.
6.
M22x1,5
M20x1,5
M18x1,5
M16x1,5
M14x1,5
M14x1,25
Temperature Sensors
1) 015-0003 M12 x 1,5
2) 015-0002 M12 x 1,25
3) 015-0001 M10 x 1,0
3
2
1
Magnets
1)
2)
3)
4)
015-0042
015-0043
015-0044
015-0041
M5, 47 mm long
M5, 12 mm long
M4,inside thread
diameter 10mm
4
3
2
1
1032
Control Lamp Adapter
Cable for
BMW R 850 GS /
R 1100 GS / R 1150 GS
For directly connecting a control
lamp kit or a SPORT control
lamp kit to a BMW R850GS /
R1100GS / R1150GS
Adapter cable R259/21
Control Lamp Adapter
cable for BMW R 80 GS /
R 100 GS as of 1991
For directly connecting a control
lamp unit or a SPORT control
lamp unit to a BMW R80GS or
R100GS on.
Adapter cable R247
Crimp Contacts with
Socket Shell
12 crimp contacts (socket) with
12 pin socket shell as on control
lamp unit (mating part)
030-0035
030-0036
030-0031
Crimp Contacts with
Connector Shell
Crimp Contacts with
AMP Socket Shell
Crimp Contacts with
AMP Connector Shell
12 crimp contacts (pin) with 12
pin connector shell as on control
lamp kit.
12 crimp contacts (socket) with
12 pin socket shell needed for
connecting a control lamp kit to
a BMW R850GS / R1100GS /
R1150GS.
8 crimp contacts (pin) with 8 pin
socket shell needed for connecting a control lamp to a BMW
R80GS / R100GS Please note:
Does not fit to the R 80 G/S and
the R80 gs basic!
030-0032
030-0037
030-0038
Cockpit
Control lamp general features
(two styles available below):
- Replaces any control lamps
- Adhesive symbols, customised labelling
- 1 green lamp
- 2 yellow lamps
- 2 red lamps
- 1 blue lamp
- Longlife LEDs
- Brightness depends on function
- Connection cable 1 m
- Waterproof
- Resistant to vibration
- Includes 12-pin blank connector and pins.
Special Features of STD Control Lamp Kit
- Very small: just 50 x 30 mm
- Very lightweight: just 100g with connection cable
- Simple to fit
- Adapter plate L-I-K to mount kit to the IMO-100R
or IMO-100R300 computers
- Adapter plate RB-I-K to mount kit to the RB-TT
030-0030
Special Features of SPORT
Control Lamp Kit
- Very bright 7‘ lamp used as gearchange light
- Special connector for connection to the
IMO-100R SPORT
- CNC-machined anodised aluminium housing
- Perfectly matches the IMO-100R SPORT design
- Adapter plate L-I-KS to mount kit to the
IMO-100R SPORT directly
- Very lightweight: just 100g with connection cable
- Very small: just 18 x 80 mm
030-0033
1033
1034
The Rallye Set
Value for money!
- Complete kit for all rallye Professionals
- Tried and tested combination of Touratech rallye
products
- The Rallye Set includes all you need for rallye
racing or for participating in events where you use
roadbooks.
- IMO-100R rallye computer incl. sensor and
installation hardware
- FB-RALLYE Bar Control for IMO computer
- RB-TT Roadbook Holder with integrated lighting,
remote control and electrical drive
- RB-I adapter plate for mounting the IMO-100R to
the RB-TT Roadbook Holder
Please note additional costs that may incur. If your
motorcycle is equipped with an AC generator
you will either need the Rallye+ model or a power
converter.
013-1011
MOSCOW
LOS ANGELES
Astana
Volgograd
Urumqui
Almaty
San
Ignacio
Xian
Antigua
Luang
Nam Tha
Acapulco
Palenque
Granada
PANAMA CITY
BANGKOK
Berli
NEW YORK
LOS ANGELES
Washington
Broome
Flagstaff
Alice Springs
Coral Bay
New Orleans
SYDNEY
PERTH
Melbourne
NAIROBI
Zanzibar
Maun
Victoria
Falls
Sossusvlei
SANTIAGO
BUENOS AIRES
Bariloche
CAPE TOWN
Perito
Moreno
Ushuaia
St. Petersburg
Riga
Berlin
BOGOTA
MUNICH
Quito
Lima
San Pedro
di Atacama
Cusco
La Paz
Iguazu
Rio de Janeiro
BUENOS AIRES
MOSCOW