Westellr Boxert BXB19-A and BXB19

R
Westellr Boxert BXB19-A and BXB19-B
Outdoor Battery Box Cabinets
Westell’s Boxer Battery Box Cabinet − a
compact, sturdy, light-weight, outdoor
cabinet, designed for mounting under a
Westell Boxer cabinet, provides separate
and secure battery storage and aesthetic
cable concealment.
Cabinet Features
S Weather and tamper-resistant battery cabinet
S Compact size (14" H x 24" W x 18.4" D)
S Lightweight aluminum (less than 23 pounds)
S Mounts with and under a Boxer cabinet
S Separate battery and cable compartments
(removable panel between compartments)
S Grounded door panels
Battery
Compartment
Cable
Compartment
S Pad-mountable, optional pole mount kit, and
optional wall and H-frame mounting kit
S Equipped with battery tie-down strap
Detachable
Locking Door Panels
(Ground Braids
not shown)
S Optional battery heater pad
Battery Compartment Features
S Vented and padlockable
Cable Compartment Features
S Rear and side wall battery tie-down railings
S Large, detachable, L-shaped panel (with ground braid)
S Full-size, detachable, front panel (with ground
S Locking, tamper-proof, cup-washer screw
S Top 1.8" hole for AC conduit or fitting
S Open top and bottom surfaces provide ample,
restriction-free, cable access
S Interior measurements: 14" H x 5.75" W x 18" D
DS_BXB19_0910RA
braid)
S Removable spacer block for a snug fit of short-
er batteries
S Locking, tamper-proof, cup-washer screws
S Interior measurements:
13.25" H x 17.75" W x 18" D
Westellr Boxer Outdoor Battery Box Cabinet
Wall & H-Frame
Mount Kit
Pole Mount Kit
BXA-PM03
BXA-WH01
Pad Mount Template Kit
BXA19-PT1
BXM1019-NHE
Cabinet
Insulator pad
Galvanized
template
Mounting a Heat Exchanger
Cabinet on a Battery Box
Bolt
Concrete anchor
BXB19-A
BXB19-A
Battery Box
BXA-HP01
Heater Pad
Part Number
A90-BXM1019-NHE
A90-BXM1019-CAF
A90-BXM1019-NMT
A90-BXB19-A
A90-BXB19-B
A90-BXS19-14
A90-BXA-HP01
A90-BXA19-PT1
A90-BXA-PM02
A90-BXA-PM03
A90-BXA-WH01
A90-BXA-CK01
Description
Boxer 400W -48VDC heat exchanger cooling, 10RU
19" rack, AC & GFI outlet
Boxer 600W -48VDC fan cooling, 10RU 19" rack,
separate Customer door, AC & GFI outlet
Boxer No active cooling, 10RU 19" rack,
AC & GFI outlet
Boxer 19 Battery Box without heater pad
Boxer 19 Battery Box with heater pad
Boxer 19 14-Inch Skirt
Boxer Battery Heater Pad
Boxer 19" Pad Mount Template
Boxer Main Cabinet Pole Mount Kit
Boxer Main Cabinet + Battery Box Pole Mount Kit
Boxer Main + Battery Box Wall/H-Frame Mount Kit
Coupling Kit: (2) 1/2", (2) 3/4", (4) 2"
Physical Feature
Height (exterior cabinet)
Height (battery compartment opening)
Width (exterior cabinet)
Width (battery compartment opening)
Depth (exterior cabinet)
Depth (both compartments)
Weight (cabinet, approx.)
Weight Load (Max.)
Operating Temperature
Humidity
Mounting
U.S.
BXM1019-CAF
Cabinet
BXB19-A
Battery Box
Metric
14 in.
35.6 cm
11 in.
28 cm
24 in.
61 cm
17 in.
43.2 cm
18.4 in.
46.7 cm
18 in.
45.7 cm
23 lbs.
10.4 kg
250 lbs.
113.5 kg
-40_ to 149_F
-40_ to 65_C
0 to 95% (non-condensing)
Pad mount. Optional kits for wall,
pole, and H-frame mounting
BXB19-A
Battery Box
(Panels
Removed)
Features and models subject to changes without notice.
OSPLANT SYSTEMS, a Westell, Inc. Business Unit, is a leading
provider of Next Generation Outdoor Cabinets, Enclosures, Power Distribution
Panels and Remote Monitoring Solutions.
Westellr and OSPLANTr are registered trademarks of Westell.
DS_BXB19_0910RA
Corporate Headquarters
Westell, Inc. USA
750 N. Commons Drive
Aurora, Illinois 60504
Inside Sales / Technical Support:
1.800.323.6883 www.westell.com