Section 5 - aquafax.co.uk
Transcription
Section 5 - aquafax.co.uk
SECTION 5 Section 5 Contents Paints, Sealants & Consumables 5 2-11, 16-17 Paints - Antifouling, Topcoats, Primers, 10-11, 19, 44 Varnishes & Woodcare, Thinners & Bilge Cleaner 12, 26, 40-41, 51-52, 57 Boat Care & Cleaning Products 13-15 Commercial Professional Paint Products 18 Engine Spray Paint 9, 20-23, 42, 57 Epoxy Products - Resin, Hardeners, Fillers, Adhesives & Additives 24 Glass Tape & Cloth 27-30, 31-33, 41, 43-44, 57 Sealants & Adhesives, Application Guns 34-41, 46 Sanding, Compounding, Polishing & Finishing Products & Accessories, Tapes 25, 45-46 Brushes, Rollers, Trays, Scrapers & Application Tools 47, 53, 67 Rags & Wipes, Brush/Mop Heads & Boating Attachments 36, 46 Masks, Goggles, Overalls, & Ear Muffs 48-52 Inflatable Boat & Rib Care, Snap Davits 54-56 PVC Fendering & Decking 57 58-63, 65-67 Six Depots Nationwide Deck Matting Oils, Lubricants, Grease & Coolants, Fuel Additives & related consumables 64 Oil Extractors 68 Toilet Fluids Email: sales@aquafax.co.uk Aquafax Limited, 1 Dencora Way, Sundon Business Park, Luton, Beds LU3 3HP Aquafax Ltd. (Hamble), 1-2 Mitchell Point, Ensign Business Park, Hamble, Southampton SO31 4RF Aquafax Ltd. (Plymouth), Unit 5 Plymouth Trade Park, 22 Macadam Road, Plymouth PL4 0RU Aquafax Ltd. (Middlewich), Unit 11, Valley Court, Sanderson Way, Middlewich, Cheshire CW10 0GF Aquafax Ltd. (Wroxham), Unit 31, Stalham Road Ind. Estate, Littlewood Lane, Hoveton, Norfolk NR12 8DZ Aquafax Ltd. (Glasgow), 103-105 Barrie Road, Hillington Park, Glasgow G52 4PX www.aquafax.co.uk Tel:(01582) 568700 Tel:(023) 80457206 Tel:(01752) 669944 Tel:(01606) 841111 Tel:(01603) 781881 Tel: (0141) 8827511 SECTION 5M Fax:(01582) 568720 Fax:(023) 80457208 Fax:(01752) 667764 Fax:(01606) 841188 Fax:(01603) 781981 Fax: (0141) 8835111 1 International Antifoulings ANTIFOULINGS Reformulated Antifoulings from International Paint - What’s New? International Paint are constantly reviewing upcoming legislation and reformulating their products to ensure they exceed compliance. One such piece of legislation is the Biocidal Products Directive (98/8/EC, BPD). The BPD will standardise the regulation of antifoulings across the EU. All current (and new) antifoulings, and the biocides they contain, will be assessed on their risk to both humans and the environment. International Paint has taken a very proactive role and has worked hard to ensure its customers will have products that are supported under the BPD. To ensure a fully compliant BPD product range, some of the antifoulings within the UK range have been reformulated. Significant investment in Research and Development has been made to ensure the new products are just as good (or better) than the products they are replacing. International Antifoulings can be applied direct over most types of antifoulings, provided they are in sound condition. Unknown antifoulings should be removed using Interstrip AF, or sealed with Primocon. See page 6 for a compatibility chart. MICRON® OPTIMA Polishing Antifouling • For the absolute cleanest hulls • Minimum build-up – reduced preparation time • Activated Biolux® technology for sustained antifouling protection • Water based – low odour, easy clean up. For the absolute cleanest hulls Practical Coverage (m²/Lt): 8.3 No. of coats: 2 - 3 Substrates: GRP, Lead, Steel, Wood, Application: Brush, Roller Thinner: Water (for clean up) Rated “Outstanding” on high fouling areas. Colour Pre-Immersion Colour 2 Litre Dover White Red Light Blue Black 5-60000 5-60001 5-60002 5-60003 Colour Post-Immersion • NOT suitable for high speed craft or on aluminium Dover White MICRON® EXTRA 2 Red Light Blue Black Practical Coverage (m²/Lt): 9.0 No. of coats: 2-3 (1 Season), 3-4 (2 Seasons) Substrates: GRP, Wood, Steel/Iron & Lead Application: Brush, Roller Thinner: No.3 for cleaning equipt, thinning of product not recommended Rated “Outstanding” on high fouling areas. Premium polishing antifouling providing 2 seasons protection in difficult fouling conditions. • High performance, premium multi-season copolymer antifouling, providing up to 2 years protection even in the harshest fouling conditions. • Polishing action ensures that a fresh, active layer of antifouling is always exposed to the water. This action results in a clean, smooth hull, minimising friction and drag. The movement of the hull through the water gradually wears away the coating, preventing leached layer build-up. This reduces surface preparation prior to re-coating, helping to save time and costs. Colour Dover White Blue Green Navy Red Dark Grey Black • Multi-season lifetime (3-4 coats) - the convenience to haul out, wash and re-launch without re-painting every season. • Biolux® technology - controlled optimised biocide release for sustained antifouling protection. Contains boosting biocides for enhanced slime and weed control. 750ml 5-60070 5-60073 – 5-60079 5-60082 – 5-60088 2.5 Litre 5-60071 5-60074 5-60077 5-60080 5-60083 5-60086 5-60089 5 Litre 5-60072 5-60075 – 5-60081 5-60084 – 5-60090 • Wide overcoating window, can be applied up to 12 months before launch - apply in Autumn launch in Spring. • Suitable for high speed craft up to 25 knots • NOT suitable on aluminium/alloy substrates or zinc sprayed surfaces. The printing processes used in producing the colour charts do not allow exact colour reproduction and we recommend that you should check for accuracy before applying. International Paints colour charts are available. 2 SECTION 5 Dover White Blue Green Navy Pre-Immersion Post-Immersion Red Dark Grey Black Visit www.yachtpaint.com for datasheets. Other sizes may be available. International Antifoulings ANTIFOULINGS CRUISER® UNO EU All-purpose polishing antifouling offering one season’s protection in just one coat. • One coat per season (after initial 2 coat scheme), offers exceptional value for money. • One season’s protection in all but harshest fouling conditions. • Polishing action ensures that a fresh, active layer of antifouling is always exposed to the water. This action results in a clean, smooth hull, minimising friction and drag. The movement of the hull through the water gradually wears away the coating, preventing leached layer build-up. This reduces surface preparation prior to re-coating, helping to save time and costs. • For powerboats (up to 25 knots) and sail boats, and suitable for all cruising leisure craft. • Painting and immersion within 24 hours Colour Pre-Immersion Colour Post-Immersion Practical Coverage (m²/Lt): 9.0 No. of coats: 1 per season after initial 2 coat application Substrates: GRP, Wood, Steel/Iron & Lead Application: Brush, Roller Thinner: No.3 for cleaning equipt, thinning of product not recommended Rated “Excellent” on high fouling areas. Colour Dover White Blue Navy Red Black 750ml 5-60280 5-60282 5-60284 5-60286 5-60288 3 Litre 5-60281 5-60283 5-60285 5-60287 5-60289 • Low VOC (~350g/L) reduces overall environmental impact to the previous International cruising antifouling • NOT suitable for use over aluminium/alloy substrates or zinc sprayed surfaces. Dover White Blue BOATGUARD EU Red Black Practical Coverage (m²/Lt): 9.0 No. of coats: 2 - 3 per season Substrates: GRP, Wood, Steel/Iron & Lead Application: Brush, Roller Thinner: No.3 for cleaning equipt, thinning of product not recommended Rated “Good” on high fouling areas. General purpose polishing antifouling for sail and power boats formulated for all waters, especially fresh and brackish. • Good general performance antifouling at low coat offering one season protection in moderate to low fouling areas. • Specially formulated for use in all waters. • Suitable for inland waterways, providing effective protection for boats in fresh water. • Polishing action ensures that a fresh, active layer of antifouling is always exposed to the water. This action results in a clean, smooth hull, minimising friction and drag. The movement of the hull through the water gradually wears away the coating, preventing leached layer build-up. This reduces surface preparation prior to re-coating, helping to save time and costs. Navy Colour Pre-Immersion Colour Post-Immersion Colour 2.5 Litre Black Blue Navy Red Dover White 5-60200 5-60201 5-60202 5-60203 5-60204 • Proven to have reduced environmental impact compared to previous International general purpose antifoulings. • NOT suitable high speed craft or for use over aluminium/alloy substrates or zinc sprayed surfaces. Dover White Blue CRUISER® BRIGHT WHITE Red Black Practical Coverage (m²/Lt): 9.2 No. of coats: 3 per season Substrates: GRP, Wood, Steel/Iron, Lead Aluminium, Bronze & Stainless Steel Application: Brush, Roller Thinner: No.3 for cleaning equipt, thinning of product not recommended Rated “Good” on high fouling areas. All-purpose bright white polishing antifouling offering one season’s protection in moderate to low fouling conditions. • Outstanding bright white finish. • Good general purpose antifouling offering one season’s protection in moderate to low fouling areas. • Suitable for all substrates including aluminium. • Speciality formulated for use in all waters. Colour Bright White • Polishing action ensures that a fresh, active layer of antifouling is always exposed to the water, resulting in a clean, smooth hull, minimising friction and drag. • Formulated for power boats (up to 30 knotts) and sail boats, and suitable for all leisure cruising craft. Navy Bright White 2.5 Litre 5-60006 Colour Pre-Immersion Colour Post-Immersion The printing processes used in producing the colour charts do not allow exact colour reproduction and we recommend that you should check for accuracy before applying. International Paints colour charts are available. Visit www.yachtpaint.com for datasheets. Other sizes may be available. SECTION 5 3 International Antifoulings ANTIFOULINGS TRILUX 33 Slow Polishing Antifouling • Slow polishing, avoids seasonal paint build up • For all substrates including aluminium; recommended for propellers and boottops • Bright colours, including bright white • Effective fouling protection for up to 18 months • Suitable for high speed craft White Navy Practical Coverage (m²/Lt): 8.3 No. of coats: 2 - 3 (1 Season), 3 - 4 (18 months) Substrates: Aluminium, S/Steel, Bronze, GRP, Lead, Steel, Wood, Application: Brush, Roller Thinner: No.3 (for clean up) Rated “Excellent” on high fouling areas. Black Green Red Pre-Immersion Post-Immersion Blue Grey Colour White Navy Black Red Green Blue Grey 375ml 5-60100 – 5-60110 5-60115 – 5-60125 5-60130 750ml 5-60101 5-60106 – – – – – 2.5 Litre 5-60102 5-60107 5-60112 5-60117 5-60122 5-60127 5-60132 Practical Coverage (m²/Lt): 9.0 No. of coats: 2 - 3 per season Substrates: GRP, Wood, Steel/Iron & Lead Application: Brush, Roller Thinner: No.3 for cleaning equipt, thinning of product not recommended Rated “Outstanding” on high fouling areas. INTERSPEED® ULTRA 2 A premium hard antifouling, ideal for fast powerboats in the highest fouling conditions. • Ultra strong formula gives maximum protection in high fouling areas • Hard, durable finished can be burnished to produce a super smooth surface for reduced drag and increased speed making it perfect for fast, active craft. Colour Dover White Green Blue Red Navy Dark Grey Black • Biolux® technology gives controlled optimised biocide release for sustained antifouling protection. Contains boosting biocides for enhanced slime and weed control. • Full range of colours (final colour develops on immersion) see right. • NOT suitable for use over aluminium/alloy substrates or zinc sprayed surfaces. 750ml 5-60136 – 5-60142 5-60145 5-60148 – 5-60154 2.5 Litre 5-60137 5-60140 5-60143 5-60146 5-60149 5-60152 5-60155 5 Litre 5-60138 – – – 5-60150 5-60156 Pre-Immersion Post-Immersion Dover White Green Blue VC® OFFSHORE EU Hard Antifouling • Suitable for salt and freshwater • Hard, smooth finish can be burnished to a smooth profile • For racing, sailing and power boats • Suitable for high speed craft • NOT suitable for use over aluminium/alloy substrates or zinc sprayed surfaces. Red Navy Dark Grey Practical Coverage (m²/Lt): 10.5 No. of coats: 2 - 3 Substrates: GRP, Lead, Steel Application: Roller Thinner: VC® General Thinner (for clean up) Rated “Excellent” on high fouling areas. Colour Dover White Blue Red Black 750ml 5-60221 5-60223 5-60225 5-60227 2 Litre 5-60222 5-60224 5-60226 5-60228 Black Dover White Blue Red Black Colour Pre-Immersion Colour Post-Immersion The printing processes used in producing the colour charts do not allow exact colour reproduction and we recommend that you should check for accuracy before applying. International Paints colour charts are available. 4 SECTION 5 Visit www.yachtpaint.com for datasheets. Other sizes may be available. International Antifoulings ANTIFOULINGS VC®17M EXTRA - GRAPHITE TRILUX PROP-O-DREV Thin Film Antifouling • For racing sailboats and powerboats • With fluoro microadditive for a low friction surface • Hard, smooth surface • Quick drying for fast re-launch • Suitable for high speed craft • Aerosol application for difficult to reach areas • For propellers, outboards & sterngear • For aluminium, stainless steel & alloy • Biolux® technology for sustained antifouling protection No. of coats: 3 minimum Coverage: 1 can per medium sized outdrive Thinner: VC® General Thinner (for clean up) Rated “Excellent” on high fouling areas. Practical Coverage (m²/Lt): 11.7 No. of coats: 2 - 3 Substrates: GRP, Lead, Steel Application: Roller Thinner: VC® General Thinner (for clean up) Rated “Excellent” on high fouling areas. Graphite 750ml 5-60219 500ml 5-60255 5-60256 Prop-O-Drev Primer (300ml) Grey Part No. 5-60258 Colour Pre-Immersion Colour Post-Immersion Colour Pre-Immersion Colour Post-Immersion Colour Graphite Description Prop-O-Drev Grey Prop-O-Drev Black 2 Litre 5-60220 Grey Black ANTIFOUL REMOVER - INTERSTRIP AF LAGO RACING II • A paint stripper especially formulated for removal of antifoulings • Interstrip AF is not aggressive and will not damage gelcoats • Bright colours - Excellent aesthetics • Waterbased - Low odour / low VOC (149g/L) • Hard, smooth finish - Easy to clean • Can be applied direct to GRP or any suitably primed surface – reduced cost, reduced working time Theoretical Coverage (m²/Lt): 9.4 No. of coats: 2 - 3 as bottomcoat (1 as primer) Substrates: GRP, Lead, Steel, Wood, Aluminium Application: Brush, Roller Substrates: GRP, Steel, Wood, Aluminium Application: Brush Colour 2.5 Litre White Blue 5-60230 5-60232 Colour 1 Litre – 5-60270 2.5 Litre 5-60271 FOR PR0FESSIONAL USE ONLY For International Professional Antifoulings see pages 13 & 14 The printing processes used in producing the colour charts do not allow exact colour reproduction and we recommend that you should check for accuracy before applying. International Paints colour charts are available. Visit www.yachtpaint.com for datasheets. Other sizes may be available. SECTION 5 5 International Antifoulings ANTIFOULING COMPATIBILITY Is My New Antifouling Compatible? Once you’ve identified the International antifouling that’s most suitable, if you have an existing coating on your hull you will need to establish the compatibility of the two products. Use this simple table to check compatibility between International® antifoulings and also with competitor products. Existing Antifouling (in good condition) Trilux Prop-O-Drev VC®17m Extra VC® Offshore EU Trilux 33 Interspeed Ultra Interspeed Ultra 2 Boatguard EU Micron® Optima Micron® Extra Micron® Extra 2 Cruiser® Uno Cruiser® Uno EU Boatguard EU Bottomcoat Navigator Trilux Interspeed Ultra 2 Cruiser Bright White Trilux 33 VC® Offshore VC® Offshore EU VC®17m Extra Unknown Product Previous antifouling in poor condition Awlgrip® Awlstar Gold Label Hempel Tiger Extra Hempel Hard Racing Hempel Cruising Performer Hempel Classic Seajet Shogun Seajet Emperor Seajet Coastal Flag Cruising Flag Performance Jotun Mare Nostrum XM CX2000 Teamac Antifouling A Teamac Antifouling D Teamac Tropical Killa Teamac Protector Key: Apply after a light wet sand. Wash with fresh water and allow to dry Apply a barrier coat of Primocon® before applying antifouling. 6 Cruiser Bright White Cruiser® Uno Cruiser® Uno EU Micron® Extra Micron® Extra 2 Micron® Optima New Antifouling SECTION 5 Remove the antifouling using Interstrip AF. Visit www.yachtpaint.com for datasheets. Other sizes may be available. International Primers PRIMERS & OSMOSIS VC® TAR2 (2 Pack) PRIMOCON® (Grey Single Pack Primer) • Conventional one-part primer for use below water • Quick drying, with anticorrosive properties • Can be used under all major antifoulings* or as a conversion coat over incompatible or unknown antifoulings Area: Below the waterline. (*Do NOT use with VC®17m systems) 750ml 2.5 Litre 5 Litre Finish: Matt No. of coats: 1 - 5 5-60850 5-60851 5-60852 Practical Coverage (m²/Lt): 7.4 Substrates: GRP, Wood, Steel, Aluminium, Lead, & Zinc Application: Brush, Roller Thinner: No. 3 YACHT PRIMER (Grey Single Pack Primer) 750ml 2.5 Litre 5-60856 5-60857 2.5 Litre 5-60861 5-60863 GELSHIELD® PLUS • A high build, solventless epoxy primer • Available in two colours to aid self-on-self application • Contains no harmful solvents to migrate into the hull and cause reblistering DELIVERY Please contact your nearest Aquafax depot for carriage details. 750ml 5-60880 5-60882 • Specifically developed for the economical protection of steel • Tough, non-cracking coating offers protection against rust and is ideal for Narrowboat Blacking • Chemically resistant to mild Applies to 20L acids & alkalis Colour 5 Litre Substrates: Steel Application: Airless Spray, Brush, Roller Black 5-60891 Colour 750ml Green 5-60860 Grey 5-60862 DO NOT THIN UNDER ANY CIRCUMSTANCES Area: Above & below the waterline. (Do NOT use over one-part products or antifoulings) Finish: Matt Practical Coverage (m²/Lt): 8.1 No. of coats: 2 - 5 Colour Substrates: Wood, Steel, Aluminium White Application: Brush, Roller, Grey Thinners: No.7 2.5 Litre 5-60881 5-60883 INTERTUF 16 (Narrowboat Hull Blacking) • Quick drying, easy to apply, epoxy primer for protection of GRP against osmosis. • Provides protection against osmosis in 5 coats • Useable down to 5°C • Fast drying allows multiple coat application in a single day Area: Below the waterline. Finish: High Sheen Practical Coverage (m²/Lt): 6.0 No. of coats: 4 Substrates: GRP. Apply to hull after removing Gelcoat Application: Brush, Roller 2.5 Litre 5-60871 – • Quick drying, easy to apply, two-part epoxy primer • Offers excellent anticorrosive protection • Can be used as an antifouling tie-coat over existing epoxy primers GELSHIELD® 200 Area: Below the waterline. Finish: Matt Practical Coverage (m²/Lt): 8.1 No. of coats: 5 - 6 Substrates: GRP Application: Brush, Roller Thinner: No. 7 Area: Below the waterline. Finish: Semi Gloss Practical Coverage (m²/Lt): 11.3 No. of coats: 3 - 7 Substrates: GRP, Steel, Colour 1 Litre Aluminium, Lead Black 5-60870 Application: Brush, Roller, Spray Off White 5-60872 Thinner: VC® General Thinner INTERPROTECT® • Conventional one-part primer for use above the water • Quick drying, with anticorrosive properties • Pigments contain aluminium flake to provide an anti-corrosive protective barrier Area: Above water, under one-part undercoats (Do NOT overcoat with two-part products) Practical Coverage (m²/Lt): 12.0 No. of coats: 4 Substrates: Wood, Steel, Aluminium, Zinc Application: Brush, Roller, Spray Thinner: No. 1 • Osmosis defence for GRP and anticorrosion barrier for metal • Advanced self-levelling formulation requires no sanding between coats • Smooth surface – ideal primer base for antifoulings Colour 2.25 Ltr Green 5-60867 Blue 5-60869 20 Litre 5-60892 INTERZONE 954 A two component, low VOC, high solids, modified epoxy barrier coat designed to give long term protection from a single coat application. It will continue to cure when immersed in water and has excellent cathodic disbondment resistance. Interzone 954 was primarily designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions make it ideal for coping with tidal movements & surges. It may be applied to reoxidised and slightly damp surfaces and should be mixed in a 4:1 mix by volume. Can be tinted to any BS or Ral number, contact us for details. Also available in 20 litre drums. Applies to 20L Finish: Gloss Application: Airless Spray, Air Spray, Brush, Roller SECTION 5 5 Litre 5-60800 20 Litre 5-60801 7 International Topcoats TOPSIDE FINISHES & UNDERCOATS PERFECTION (2 Pack Polyurethane Gloss) • Ultimate performance, two-part polyurethane finish • Chemical cure for the hardest finish & highest abrasion resistance • Unique UV protection for superior, long-lasting gloss and colour • Professional-quality results made easy Area: Above the waterline Finish: High Gloss Practical Coverage (m²/Lt): 12.0 No. of coats: 2 - 3 Substrates: GRP, Wood, Steel, Aluminium Application: Brush, Roller Thinner: No.9 PERFECTION UNDERCOAT Colour Platinum Mediterranean White Off White Royal Blue Snow White Jade Mist Green Chilli Red Mauritius Blue Flag Blue Fighting Lady Yellow Cream Rochelle Red Lauderdale Blue Jet Black • High performance two-part polyurethane undercoat • Provides an excellent base for a long-lasting gloss finish • Easy application, fast drying and easy sanding • Semi-gloss appearance 750ml 5-60350 5-60352 5-60354 5-60356 5-60358 5-60360 5-60362 5-60364 5-60366 5-60368 5-60370 5-60372 5-60374 5-60376 Area: Above the waterline Finish: Semi Gloss Practical Coverage (m²/Lt): 12.0 No. of coats: 1 - 2 Substrates: GRP, Wood*, Steel*, Aluminium* (*over suitable primer) 2.5L Application: Brush, Roller Colour 750ml Thinner: No.9 White 5-60390 5-60391 Platinum Med White Off White Royal Blue Snow White Jade Mist Green Chilli Red Mauritius Blue Flag Blue Fighting Lady Yellow Cream Rochelle Red Lauderdale Blue Jet Black TOPLAC® (1 Pack Gloss) • Premium quality high-gloss durable yacht enamel • Silicone alkyd formula lasts twice as long as conventional one-part enamels • Excellent UV resistance • Extended gloss and colour retention characteristics • Easy to apply giving deep, lustrous finish Colour Cream Mediterranean White Ivory Norfolk Green Woodward Green Rescue Orange Fire Red Squall Blue Snow White Oxford Blue Danube Blue Atlantic Grey Platinum Mauritius Blue Bounty Yellow Rochelle Red Lauderdale Blue Donegal Green Bondi Blue Jet Black Rustic Red Sapphire Blue 750ml 5-60450 5-60452 5-60454 5-60456 5-60457 5-60458 5-60460 5-60462 5-60464 5-60466 5-60468 5-60470 5-60471 5-60472 5-60474 5-60476 5-60478 5-60480 5-60482 5-60484 5-60486 5-60488 5-60490 2.5 Litre – 5-60453 – – – – – – 5-60465 – – – – – – – – – – – – – – Undercoat White Pre-Kote White Pre-Kote White Pre-Kote Blend* Blue/Grey Pre-Kote Blend* Blend* Blue/Grey Pre-Kote White Pre-Kote Blue/Grey Pre-Kote Blue/Grey Pre-Kote Blue/Grey Pre-Kote Blend* Blue/Grey Pre-Kote Blue/Grey Pre-Kote White Pre-Kote Blend* Blue/Grey Pre-Kote Blue/Grey Pre-Kote Blue/Grey Pre-Kote Blue/Grey Pre-Kote Blend* Blue/Grey Pre-Kote Area: Above the waterline Finish: High Gloss Practical Coverage (m²/Lt): 12.0 No. of coats: 1 - 2 Substrates: GRP, Wood, Steel, Aluminium Application: Brush, Roller Thinner: No.1 Cream Med White Ivory Norfolk Green Woodward Green Rescue Orange Fire Red Squall Blue Snow White Oxford Blue Danube Blue Atlantic Grey Platinum Mauritius Blue Bounty Yellow Rochelle Red Lauderdale Blue Donegal Green Bondi Blue Jet Black Rustic Red Sapphire Blue *Blend = 50% White Pre-Kote/50% finish colour The printing processes used in producing the colour charts do not allow exact colour reproduction & we recommend that you should check for accuracy before applying. International Paints colour charts are available. 8 SECTION 5 Visit www.yachtpaint.com for datasheets. Other sizes may be available. International Miscellaneous TOPSIDE FINISHES & UNDERCOATS PRE-KOTE UNDERCOAT MATTING ADDITIVES • Undercoat for one-part finishes • Excellent opacity allows for easy colour changing • Long-lasting, easy to apply and rub down • Long overcoating times allow coat-on-coat application Matting additives can be added to both International finishes and varnishes; and depending on the mix ratio between the product and the additive, a variety of gloss, satin or matt effects can be achieved. International produces two types of matting additive, suitable for use with either the one-part or two-part products in the range. Area: Above the waterline Thinner: No.1 Application: Brush, Roller, Conventional Spray (professional spray application only) Area: Above the waterline Finish: Low Sheen No. of coats: 1 - 2 Thinner: No.1 Practical Coverage (m²/Lt): 12.0 Substrates: GRP, Wood*, Steel*, Aluminium* (*over suitable primers) Application: Brush, Roller Colour White Blue/Grey 375ml 5-60519 – 750ml 5-60520 5-60523 Description One Pack Matting Additive 750ml Two Pack Matting Additive 750ml 2.5 Litre 5-60521 – Part No. 5-60500 5-60501 PAINT & NON-SLIP COATINGS DANBOLINE BILGE & LOCKER PAINT INTERDECK® (Non-Slip Coating) • Hard wearing coating for bilges, lockers and bulkheads • Chemical resistance to fumes, fuel and oil • High opacity for thorough coverage • Cleans easily for reduced maintenance Area: Above and below the waterline. Finish: High Sheen Practical Coverage (m²/Lt): 11.0 No. of coats: 1 - 2 Substrates: GRP, Wood*, Steel*, Aluminium* (*over suitable primers) Application: Brush, Roller Thinners: No.1 Colour Grey Red White 750ml 5-60510 5-60512 5-60514 2.5 Litre 5-60511 – 5-60515 Grey Red White • Slip resistant polyurethane deck paint • Contains fine mineral additive for hard wearing, non-slip surface • Suitable for all substrates • Low sheen finish prevents sunlight dazzle • Apply straight from the can with brush or roller Area: Above the waterline. Finish: Low Sheen Colour Practical Coverage (m²/Lt): 9.5 White No. of coats: 1 - 2 Squall Blue Substrates: GRP, Wood*, Steel*, Aluminium* Cream (*over suitable primers) Grey Application: Brush, Roller Thinners: No.1 Sand Beige White Squall Blue Cream NON-SLIP ADDITIVE NON-SLIP AGGREGATE Non-Slip Additive is a synthetic, granular material that can be added to topside finishes prior to application or sprinkled onto wet paint as an aid to providing a more slip-resistant finish. As with the matting additives, the final result is determined by the amount of material added into the finish. 20g Part No. 5-60550 Silica sand non-slip aggregate for a range of coating schemes. To be added to the top coat to give a non-slip surface profile. Grey 750ml 5-60535 5-60536 5-60537 5-60538 5-60539 Sand Beige 500g Part No. 5-60555 EPOXY FILLER WATERTITE EPOXY FILLER Your boat is not only under attack from the elements. Damage can also result from collisions or other physical impacts. Watertite is a two-part water resistant filler, suitable for use with most common substrates Area: Above and below the waterline Thinners: No.7 Practical Coverage (m²/Lt): 1.0 (at 1mm thick) Substrates: GRP, Wood, Steel, Aluminium, Lead FILLERS SHOULD ALWAYS BE APPLIED ONTO PRIMER AND NOT OVER BARE SUBSTRATES. • Quick drying epoxy filler suitable for use on GRP, Metals and rigid Wood constructions. • The formulation does not shrink and is extremely water resistant, making it suitable for localised osmosis damage repairs. • Fills up to 20mm without sagging and is ideal for use above and below the waterline. • Watertite is high strength and has good adhesion properties. It is very fast drying and supersmooth when dry. • This is an extremely hard dry epoxy filler, therefore do not over apply. Visit www.yachtpaint.com for datasheets. Other sizes may be available. SECTION 5 250ml 1 Litre 5-60750 5-60751 9 International Varnishes VARNISHES PERFECTION PLUS ( Two-Pack Polyurethane Varnish) GOLDSPAR® SATIN • Ultimate performance, clear, two-part polyurethane varnish • Chemical cure for the hardest finish and highest abrasion resistance • Superior gloss lasts four times longer than conventional one-part varnishes • Professional quality results made easy • 2:1 mix ratio: Easy to measure and mix (One-Pack Varnish) Finish: High Gloss No. of coats: 2 - 5 Practical Coverage (m²/Lt): 12.0 Substrates: Wood (suitable for use direct to oily timber e.g teak or iroko) Application: Brush, Roller Thinners: No.9 UV Protection/Gloss Retention: ❂❂❂❂❂❂ • A satin finish polyurethane varnish for interior use • Resistant to hot water, mild acids and alkalis • Fast-dry formulation minimises dust contamination 750ml 2.5 Litre 5-60701 5-60702 SCHOONER® (One-Pack Varnish) • Fast-dry, high durability, polyurethane high gloss varnish • Excellent resistance to abrasion, oils and chemicals • Fast-drying, apply 2 coats per day, sand only after 2-3 coats • Light amber colour • Contains HALS and UV absorbers Finish: High Gloss No. of Coats: 5-7 Practical Coverage (m²/Lt): 14.3 Substrates: Wood (suitable for use 375ml 750ml direct to oily timber e.g teak or iroko) 5-60705 5-60706 Application: Brush, Roller, Spray Thinners: No. 1 (Brush/Roller) No. 3 (Spray) UV Protection/Gloss Retention: ❂❂❂ 2.5 Litre 5-60707 SCHOONER® GOLD (One-Pack Varnish) • Advanced UV technology, longest-lasting one-part varnish • Exceptional deep gloss & colour are retained over the lifetime of the coating • Sand between every other coat • Traditional amber colour • Use without thinning in warm/higher temperature climates 750ml 2.5 Litre 5-60711 5-60712 ORIGINAL (One-Pack Varnish) • Traditional, general purpose gloss varnish • Good flow, flexibility and gloss retention • High clarity finish for light colour woods • Interior, exterior and over existing varnish Finish: Full Gloss No. of coats: 3 Practical Coverage (m²/Lt): 11.7 Substrates: Wood (suitable for use 375ml 750ml direct to oily timber e.g teak or iroko) 5-60720 5-60721 Application: Brush, Roller, Spray Thinners: No. 1 (Brush/Roller) No. 3 (Spray) UV Protection/Gloss Retention: ❂❂ 10 SECTION 5 2.5 Litre 5-60727 COMPASS (One-Pack Varnish) • Premium quality, traditional tung oil varnish with excellent UV protection • Rich golden colour and deep gloss • Good flow-out and self-levelling characteristics for easier application Finish: High Gloss No. of coats: 2 - 6 Practical Coverage (m²/Lt): 12.9 Substrates: Wood (suitable for use direct to oily timber e.g teak or iroko) Application: Brush, Roller, Conventional Spray Thinners: No. 1 (Brush/Roller) No. 3 (Spray) UV Protection/Gloss Retention: ❂❂❂❂ Finish: Satin No. of coats: 3 Practical Coverage (m²/Lt): 10.30 Substrates: Wood (suitable for use 375ml 750ml direct to oily timber e.g teak or iroko) 5-60725 5-60726 Application: Brush, Roller Thinners: No. 1 (Brush/Roller) No. 3 (Spray) UV Protection/Gloss Retention: For interior use only Finish: High Gloss No. of coats: 3 - 6 Practical Coverage (m²/Lt): 12.9 Substrates: Wood (suitable for use direct to oily timber e.g teak or iroko) Application: Brush, Roller, Spray Thinners: No. 1 (Brush/Roller) No. 3 (Spray) UV Protection/Gloss Retention: ❂❂❂ 375ml 750ml 5-60730 5-60731 2.5 Litre 5-60732 5 Litre 5-60733 WOODSKIN A flexible wood oil/varnish hybrid that acts like a skin for your wood. Microporous properties allow Woodskin to breathe with your wood; tiny holes let the paint film expand and contract but are small enough to repel water; the cause of mould & mildew. • Easy to apply; no need to thin or sand between coats • Good flow and levelling • Dries to a subtle, translucent sheen. • Penetrates deep into your wood, leaving a thin surface film that will not crack or flake. • Minimal maintenance; simply clean and reapply season after season • The natural teak colour compliments any wood type 750ml 5-60737 Finish: Satin No. of coats: 3 Theoretical Coverage (m²/Lt): 10 Substrates: Wood (suitable for use direct to oily timber e.g teak or iroko) Application: Brush Thinners: Do not thin UV Protection/Gloss Retention: ❂❂❂ 2.5 Litre 5-60722 UV Protection/Gloss Retention Ratings: ❂ Good ➔ ❂❂❂❂❂❂ Outstanding Visit www.yachtpaint.com for datasheets. Other sizes may be available. International Paint Thinners THINNERS Thinners are solvents which are usually the same, or very similar, to those used within the product they are recommended with. They can be used as an additive to ease application, or to clean brushes and equipment. THINNERS NO. 1 THINNERS NO. 3 General purpose thinner and equipment cleaner for Alkyd based one-part paints and varnishes including: Toplac, Interlux, Pre-cote, Interdeck, Danboline, Original, Goldspar Satin, Schooner Gold, Schooner, Compass and Intertuf 16, above the waterline. Typically used with antifouling paints (excluding Micron® Optima and VC® products), below the waterline. Also used to aid with the spray application of our one-part varnishes. 500ml Part No. 5-60904 1 Litre Part No. 5-60903 5 Litre Professional Part No. 5-60913 500ml Part No. 5-60900 1 Litre Part No. 5-60901 5 Litre Professional Part No. 5-60902 THINNERS NO. 10 (PROFESSIONAL) For professional use only, this product is suitable for thinning and/or cleaning equipment in association with Toplac and Clear Wood Sealer (Std), above the waterline. 1 Litre Professional Part No. 5-60910 THINNERS NO. 7 Formulated for use with epoxy based products in applications above and below the waterline. 1 Litre Part No. 5-60907 5 Litre Professional Part No. 5-60917 THINNERS NO. 9 VC® GENERAL THINNERS For use with two-part polyurethane products above the waterline. 1 Litre Part No. 5-60909 Specially formulated for use with VC® products below the waterline. 1 Litre Part No. 5-60920 FOR PR0FESSIONAL USE ONLY BILGE CLEANING CUPRINOL BILGEX Clears Grease, Scum & Oil • Emulsifies petrol, oil and grease in the bilge • Removes grease, scum and floating oil with the normal movement of the boat • Biodegradable • Highly concentrated - a little goes a long way • Gets rid of bad smells • Non-caustic; harmless to paintwork and fittings when diluted Description Part No. 1 Litre Bottle 5-27030 5 Litre Bottle 5-27031 See our Range of International Paint Professional Products on pages 13 - 15 Visit www.yachtpaint.com for datasheets. Other sizes may be available. SECTION 5 11 International Boat Care Products BOAT MAINTENANCE Keep your boat in top condition with this great range of products SUPER CLEANER BOAT SHAMPOO • High Strength Formula • Removes dirt, oil, wax & grease • Low odour • Cleans and degrease without damaging gelcoat or paint • Does not leave any residue • Biodegradable • Leaves GRP and painted surfaces ready to be restored • Mild universal cleaner useful for cleaning throughout the boating season but won’t damage wax protection • Hydrophobic – repels water • Free from silicon oils • Mixable with sea water and fresh water • Biodegradable Part No. 5-60950 (500ml) Part No. 5-60951 (500ml) LIQUID RUBBING MARINE POLISH • Coarse grain size – suitable for painted surfaces and GRP in poor condition • Safely removes marks and yellowing, and restores gloss • Restore the gelcoat’s original lustre • May be used in direct sunshine • Does no contain wax and silicone oils • Manual or machine use (800-1000 rpm) • Fine graded liquid polish for a high gloss, smooth, reflective surface • Contains no silicon oils • Mild odour • Manual or machine use (800-1000 rpm) Part No. 5-60953 (500ml) MARINE WAX • Protective wax for GRP and paintwork • Provides excellent protection for polished surfaces • No abrasives or silicon oils • Easy to work & apply on large areas • Manual or machine use (800-1000 rpm) Part No. 5-60955 (500ml) TEAK RESTORER • Cleans, restores and brightens teak and other hardwoods back to their original colour • Does not damage GRP, varnish, paintwork or aluminium • Can be used in conjunction with seawater or freshwater • For use on any teak or hardwood POLISH AND WAX • All in one medium grade polish and wax formula • A quick and easy solution which saves time and effort • Contains a protective wax for long-lasting gloss • Safe for use on gelcoat and painted surfaces • Manual or machine use (800-1000 rpm) Part No. 5-60956 (500ml) TEAK OIL • Penetrating hardwood oil which protects and enhances the natural beauty of teak • Contains a rust inhibitor for metal surfaces • Penetrates even moist wood • Produces a protective and easy-clean surface • For use on any teak or hardwood Part No. 5-60959 (500ml) • High-strength GRP cleaning gel • Easy to use • Penetrating gel quickly dissolves stains and marks on GRP areas like waterline or exhaust pipe stains • Removes surface rust on metal and gelcoat • Contains surfactant that dissolves oil and proteins • Does not damage adjacent surfaces • Will not run on vertical surfaces • No abrasives • No scrubbing required Part No. 5-60952 (500ml) UV WAX SEALER • UV absorbing reactive wax, sealing the surface for ultimate gloss protection • Protects polished surfaces against the elements, dirt and oil • Hydrophobic – repels water. Also repels oil and dirt • Easy to use • Excellent UV protection • Manual or machine use (800-1000 rpm) Part No. 5-60957 (500ml) TEXTILE WATERPROOFER • Waterbased Textile Waterproofer provides an effective water barrier for textiles used in the boating industry • Environmentally friendly formulation • Suitable for covers, canopies, sprayhoods and other textiles • No discolouration and no loss of flexibility Part No. 5-60960 (500ml) NEW Visit Our Website: www.aquafax.co.uk Part No. 5-60958 (500ml) 12 Part No. 5-60954 (500ml) STAIN REMOVER SECTION 5 International Professional Antifouling COMMERCIAL MARINE PAINT PRODUCTS FOR PR0FESSIONAL USE ONLY MICRON WA PROFESSIONAL ANTIFOULING 5L • Unique Water Activated Matrix Technology offers powerful antifouling protection against all type of fouling in all types of water • Longer in-service periods improves flexibility of maintenance schedules • Vibrant colour and uniform appearance when immersed in water providing an attractive finish • Very low VOC helps owners and boatyards to reduce their environmental impact Colour 5 Litre and meet local regulations Black 5-60094 • Water based formulation Blue 5-60095 facilitates quick and easy Navy 5-60096 clean up, low odour and Red 5-60097 fume emissions providing a Dover White 5-60098 safe working environment Practical Coverage (m²/Lt): 3.66 (Spray), 8.3 (Brush/Roller) No. of coats: Brush/Roller:* 2 coats for one season, 3 coats for two seasons. Spray:* 2 coats for up to two seasons performance Substrates: GRP, Wood, Steel, Cast Iron, Lead Application: Airless spray, brush/roller Thinners: No.3 *When recommended DFT (Dry Film Thickness) is applied Colour Pre-Immersion Black Colour Post-Immersion Blue Navy Red Dover White Micron WA - Outstanding Multi Season Protection* • Haul, wash and re-launch without re-painting every season • Extended in-service periods so owners and captains save money by the boat remaining in the water for longer • Improved flexibility of maintenance schedules with the option to apply more coats for more than 24 months performance A panel test conducted in Malaga, Spain examined five different antifouling paints. Sample 3 with Micron WA shows very little slime after immersion for 26 months, in comparison to many of the others which display a significantly higher level of slime and fouling. UNI-PRO EU ANTIFOULING INTERSPEED 6200 & 6400 Economical All Purpose Antifouling Controlled Depletion Polymer Antifoulings • Universal antifouling designed for sailing boats & power boats • Season long protection in all but the harshest fouling conditions • Simple standardised surface preparation • Compatible with the majority or antifouling schemes • Suitable for boats up to 25 knots • TBT free controlled depletion polymer (CDP) providing an economical choice of fouling control • Self polishing antifouling system for up to 36 months in service periods • Can be applied directly over existing antifoulings • For new building, maintenance and repair • Choice of Interspeed 6200 economical or 6400 higher strength commercial eroding antifouling Not suitable for use over aluminium/alloy substrates or zinc sprayed surfaces. Colour Pre-Immersion Dover White Applies to 20L Colour Post-Immersion Blue Navy Red Practical Coverage (m²/Lt): 3.0 (Spray), 9.0 (Brush/Roller) No. of coats per season: 1 (Spray), 2 (Brush/Roller). Apply extra stripe coat in areas Colour of high wear such as chines, rudders, stern gear Dover White and leading edges Blue Substrates: GRP, Wood, Steel/Iron, Lead Navy Red Application: Airless spray, Airmix, brush/roller Black Thinners: No. 3 5 Litre 5-60290 5-60292 5-60294 5-60296 5-60298 Black Theoretical Coverage (m²/Lt): Interspeed 6200 7.5 – 3.7 at 75-150 microns dft Interspeed 6400 8.0 – 4.0 at 75-150 microns dft Substrates: GRP, Steel, Iron, Lead Application: Airless spray, brush/roller Thinners: No. 3 20 Litre 5-60291 5-60293 5-60295 5-60297 5-60299 Description 6200 Red 6400 Blue 6400 Red 6400 Black 20 Litre 5-60181 5-60191 5-60193 5-60195 The printing processes used in producing the colour charts do not allow exact colour reproduction and we recommend that you should check for accuracy before applying. International Paints colour charts are available. DELIVERY Please contact your nearest Aquafax depot for carriage details. SECTION 5 13 International Professional Antifouling & Primers COMMERCIAL PAINT PRODUCTS FOR PR0FESSIONAL USE ONLY MICRON 77 ANTIFOULING 5L Professional SPC Antifouling • Self polishing Copolymer antifouling • Biolux SPC technology ensure two seasons performance in the harshest fouling conditions even over long stationary periods • Maximum speed and fuel efficiency by continuously smoothing ensure minimal drag • Suitable for fresh and salt water areas • Not suitable for high speed craft Not suitable for use over aluminium/alloy substrates or zinc sprayed surfaces. INTERPRIME 198 Practical Coverage (m²/Lt): 4.0 (Airless Spray), 9.0 (Brush/Roller) No. of coats: 2 - 3 min (Airless Spray), 3 - 4 min (Brush/Roller) Substrates: GRP, Wood, Carbon Fibre, Steel, Cast Iron, Lead Application: Airless spray, brush/roller Thinners: No. 3 Colour Pre-Immersion Black Colour Post-Immersion Navy Blue 5 Litre 5-60810 5-60811 5-60812 INTERPRIME 820 5L For Interprime 820 & 880 Epoxy Primers This product is a blend of organic solvents specifically designed for thinning and or cleaning equipment used with Interprime 820, Interprime 880 and Polyurethane base coat for applications by spray. Fast and slow options available. 20 Litre – – 5-60815 2 Part Epoxy 3:1 volume mix, order base and curing agent separately High Performance Epoxy Primer • High performance 2 part epoxy primer containing inert pigments and extenders • For use on steel and aluminium above and below the waterline • Excellent corrosion protection • Choice of white or grey for easy over coating identification Practical Coverage (m²/Lt): 2.8 by spray Substrates: GRP, Steel, Aluminium, Lead Application: Airless spray, conventional spray, Airmix, brush/roller Thinners: No. 910 and 920 Description Base (White) 3.75L Base (Grey) 3.75L Curing Agent 1.25L Part No. 5-60841 5-60842 5-60840 14 SECTION 5 Spray Temp. Range 10 - 15ºC 15 - 22ºC Part No. 5-60921 5-60922 INTERTUFF 203 ALUMINIUM 20L Vinyl Anticorrosive • One pack tar free vinyl anticorrosive for both above and below the waterline. • Can be used as a sealer coat over Tributyltin (TBT) antifoulings • Suitable for use with controlled cathodic protection Part No. 5-60893 INTERTUFF 362 BLACK 20L High Performance Epoxy Finish Primer Theoretical Coverage (m²/Lt): 4.0 @ 250 microns dft Substrates: GRP, Composite and suitably primed metal and wood Application: Airless spray, conventional spray Thinners: No. 910 for temperature 5 - 21ºC and cleaning, No. 920 21 - 35ºC Description 910 Fast (5L) 920 Slow (5L) Theoretical Coverage (m²/Lt): 5.33 @ 75 microns dft Substrates: Steel, Cast Iron, Lead Application: Airless spray, brush/roller Thinners: No. 3 INTERPRIME 880 • 2 Part epoxy finish primer designed for use across a broad temperature range and provide an excellent, smooth base for polyurethane top coats such as Perfection. • Anticorrosive properties to accommodate ‘sand through’ on metal substrates • Excellent gloss holdout of top coats 5 Litre 5-60040 5-60042 5-60044 5-60046 THINNERS 910 & 920 SPRAY BOAT SOLVENT Alkyd Primer • Quick drying one pack primer • Surface tolerant and compatible with Applies to 20L most substrates above water areas • Can be over coated with a wide range of finishes • For maintenance, repair or onboard maintenance Theoretical Coverage (m²/Lt): Colour 5.47 @ 75 microns dft White Substrates: GRP, Wood, Steel, Cast Iron, Lead Red Application: Airless spray, brush/roller Grey Thinners: No. 3 Red Colour Black Navy Blue Red Epoxy Anticorrosive Description Base (Off White) Base (Blue Grey) 1 Litre 5-60831 5-60833 4 Litre 5-60830 5-60832 Description Curing Agent 1 Litre 5-60835 4 Litre 5-60834 2 Part Epoxy 1:1 volume mix, order base and curing agent separately • Hard wearing, surface tolerant two pack epoxy primer • High performance anticorrosive coating for use from keel to rail • Suitable for use with controlled cathodic protection • Supplied as 15L Base & 5Ltr Curing agent Part No. 5-60895 Theoretical Coverage (m²/Lt): 4.47 @ 150 microns dft Substrates: Steel/Iron & Concrete Application: Airless spray, brush/roller Thinners: No. 7 DELIVERY Please contact your nearest Aquafax depot for carriage details. International Professional Topcoats, Fillers & Resin COMMERCIAL PAINT PRODUCTS FOR PR0FESSIONAL USE ONLY INTERLAC 665 Alkyd Finishing Coat • A one pack alkyd gloss finish • For use as an easily maintained cosmetic finish coat on areas above the waterline • For use with new building, maintenance INTERGARD 269 RED 5L Epoxy Primer / Tie Coat • Quick drying 2 pack epoxy primer / tie coat which is suitable for over coating after extended periods of weathering. • For use as a primer for the protection of prepared steel prior to the application of a wide range of products • Can also be used as a tie coat for application to freshly applied zinc primers to prevent zinc salt formation on weathering and prevent pin holing of subsequent applied coatings • Suitable for use with control cathodic protection Part No. 5-60820 Practical Coverage (m²/Lt): 10.0 No. of Coats: 2 - 3 Coats Substrates: GRP, Wood, Steel, Aluminium Application: Airless spray, conventional spray, brush/roller Thinners: No. 1 Theoretical Coverage (m²/Lt): 11.75 @ 40 microns dft Substrates: Steel, Cast Iron & Zinc primers Application: Airless spray, conventional spray, brush/roller Thinners: No. 7 2 Part Epoxy resin 4:1 volume mix, order base plus either standard, fast or slow curing agent and pump set for ease of measuring mix quantities. PROJECT PACKS Project Pack Fast 3.8L Project Pack Std 3.8L HT55 Pump Set Part No. 5-60775 5-60776 5-60843 5 Litre 5-60300 5-60301 5-60302 5-60303 5-60304 5-60305 5-60306 5-60307 5-60308 5-60309 5-60310 5-60311 5-60312 5-60313 5-60314 - 20 Litre 5-60330 5-60315 White Ensign Red Signal Red Stone International Orange Ocean Blue Surf Grey Storm Grey Red Signal Green Dark Admiralty Grey Black Yellow Signal Blue Cornflower Blue Sky Blue Other colours are available to order from the Interlac 665 product range CLEAR WOOD SEALER Clear Polyurethane Primer • Premium fast drying, clear two-pack polyurethane primer • Fast drying properties enables up to 4 coats to be applied in one day (at 23ºC un-thinned) • Suitable for use above the waterline on both interior & exterior surfaces • Provides an exceptional impact, scratch and wear resistant primer surface ready for over coating EPIGLASS HT9000 Epoxy Resin • Versatile epoxy resin system suitable for sheathing, laminating, filling and fairing, & gluing on boats of all types. • Solvent free and low odour ensuring a cleaner environment • Low viscosity for ease of mixing and wet out Applies to 20L BULK PACKS Part No. Epoxy Resin Base 20L 5-60770 Std Curing Agent 5L 5-60771 Fast Curing Agent 5L 5-60772 Slow Curing Agent 5L 5-60773 HT80 Pump Set 5-60774 Applies to 20L Interlac Undercoat Colour 5 Litre White 5-60340 Black 5-60341 Colour White Ensign Red Signal Red Stone International Orange Ocean Blue Surf Grey Storm Grey Red Signal Green Dark Admiralty Grey Black Yellow Signal Blue Cornflower Blue Sky Blue Description Base (Fast) 5L Curing Agent (Fast) 5L Part No. 5-60740 5-60741 2 Part Epoxy 1:1 volume mix, order base and curing agent separately Practical Coverage (m²/Lt): 10.0 (Brush/Roller) No. of Coats: 4 Coats minimum. Number of coats depends on the porosity of the wood. More coats may be required to fill the wood grain. Substrates: Marine plywood and tropical hardwood Application: Conventional Spray, Brush/roller Thinners: No. 9 INTERFILL 830 Epoxy Profiling Filler • Suitable for profiling above and below the waterline on steel, aluminium and composite hulls • Two part light grey epoxy formulation can fill up to 1” (25mm) thick in one coat without sagging or slumping • High strength and impact resistant waterproof filler • Particularly suitable for application over large areas at low temperatures & easily sanded. Description Base Std Curing Agent Fast Curing Agent 2.5 Litre 5-60754 5-60756 5-60758 10 Litre 5-60755 5-60757 5-60759 INTERFILL 833 Epoxy Finishing Filler • For use over Interfill 830 to correct minor surface defects before applying finishing coats. • Fine grade extenders give extra smooth results • Contrasting colour to Interfill 830 for easier surface preparation & easily sanded • Can be applied using a trowel, filling knife or fairing batten to a thickness of 0.3cm. Applies to 10L 2 Part Epoxy 1:1 volume mix, order base plus either standard or fast curing agent separately Description Base Std Curing Agent Fast Curing Agent 2.5 Litre 5-60760 5-60761 5-60762 The printing processes used in producing the colour charts do not allow exact colour reproduction and we recommend that you should check for accuracy before applying. International Paints colour charts are available. DELIVERY Please contact your nearest Aquafax depot for carriage details. SECTION 5 15 Nautical Antifouling Primer & Thinners THE NAUTICAL RANGE Great Value Marine Coatings Distributed by Aquafax ERODING ANTIFOULING UNDERWATER PRIMER Nautical Eroding Antifouling is a general purpose antifouling designed to provide good antifouling protection for up to one season in moderate to low fouling conditions. Nautical Underwater Primer is a quick drying one-part yacht primer suitable for all surfaces below the waterline. Recommended for use with Nautical Eroding Antifouling, it can also be applied as a barrier coat over unknown antifoulings. Features • Low cost, good one-part underwater primer • Quick drying and anticorrosive • Can be used as a barrier/sealer over unknown antifoulings (in good condition) • Can be applied to all substrates below water. Antifouling coatings in poor condition should be removed using a suitable paint stripper. • NT2 recommended for cleaning/thinning • Do not overcoat with any two-part products Features • Low cost, good general performance antifouling • Specially formulated for use in all waters and suitable for inland waterways • Self polishing action resulting in a clean, smooth hull, minimising friction & drag. Gradually wears away preventing leached layer build-up. This reduces surface preparation prior to recoating, saving time and money • Surface tolerant – compatible over most antifouling paints • Can be applied direct over most other antifouling paints provided they are in good condition (see table opposite) • Seal unknown antifoulings with Nautical Underwater Primer • No thinning required. NT2 recommended Colour 2.5 Litre for cleaning Red 5-64001 • Suitable for vessels up to 20 knots Navy 5-64003 • Do not use on aluminium Black 5-64004 Specifications: No. of Coats: Theoretical Coverage: Practical Coverage: VOC: Application Method: Typical Shelf Life: Colour Pre-Immersion Red 2-3 per season 10m2/L (brush) 9m2/L (brush) 434g/L Brush / Roller 2 years Colour Grey Colour Post-Immersion Navy SECTION 5 750ml 5-64060 2-5 coats (depending on substrate) 8.33m2/L 7.40m2/L 584g/L Brush / Roller 2 years 2.5 Litre 5-64061 THINNERS / CLEANERS Black The printing processes used in producing the colour charts do not allow exact colour reproduction & we recommend that you should check for accuracy before applying. 16 Specifications: No. of Coats: Theoretical Coverage: Practical Coverage: VOC: Application Method: Typical Shelf Life: NT1: Solvent for use with Gloss Enamel, Gloss Varnish and Primer Undercoat. NT2: Solvent for use with Eroding Antifouling and Underwater Primer. Thinner No.1 No.2 1 Litre 5-64091 5-64092 Grey Nautical Gloss Enamel, Primer & Gloss Varnish THE NAUTICAL RANGE GLOSS ENAMEL PRIMER & UNDERCOAT Nautical Gloss Enamel is a quality one-part yacht enamel with good gloss retention. It provides good coverage and a long lasting finish on surfaces above water. Gloss Enamel is easy to apply and is available in 10 bright, attractive colours. Nautical Primer & Undercoat is a one-part yacht primer & undercoat for use on surfaces above water. The product is easy to apply, quick drying and offers good protection.Recommended for use with Nautical Gloss Enamel Features • Low cost, one-part primer & undercoat • Quick drying • Good adhesion - provides a good sandable base, maximising the appearance White of Gloss Enamel • Good opacity and flexible application Colour 750ml 2.5 Litre • Can be applied to most substrates White 5-64050 5-64051 • NT1 recommended for cleaning • Do not overcoat with any two-part products or mix with top coats Cream NAUTICAL GLOSS VARNISH Nautical Gloss Varnish is a traditional, easy to apply, one-part yacht varnish with good gloss retention and flexibility. The product is suitable for internal and external wood, especially lighter colour timbers and can also be applied over existing coatings. Yellow Red Green Mid Blue Dark Blue Grey Black Features • Low cost traditional one-part varnish • Good flexibility, flow & gloss retention - resists wood cracking & peeling • Quick and easy to apply • NT1 recommended for cleaning/thinning • Do not apply two-part varnishes over one part products Specifications: No. of Coats: Theoretical Coverage: Practical Coverage: VOC: Application Method: Typical Shelf Life: The printing processes used in producing the colour charts do not allow exact colour reproduction & we recommend that you should check for accuracy before applying. New Key: Colour Clear 750ml 5-64040 Clear Nautical Eroding Teamac Protector Hempel Cruising Performer Hempel Hard Racing Hempel Tiger Extra Previous antifouling in good condition Existing Antifouling (in good condition) Unknown Product Nautical Eroding Antifouling Compatibility Table 3 (minimum) 13.00m2/L 11.70m2/L 352g/L Brush / Roller 2 years Teamac Tropical Killa Off White 3 (minimum) 13.33m2/L 427g/L Brush / Roller 2 years Teamac Antifouling D White Specifications: No. of Coats: Theoretical Coverage: VOC: Application Method: Typical Shelf Life: 2 (minimum) 10.5m2/L (brush/roller) 9.5m2/L (brush/roller) 506g/L Brush / Roller 2 years Teamac Antifouling A • NT1 recommended for cleaning Specifications: No. of Coats: Theoretical Coverage: Practical Coverage: VOC: Application Method: Typical Shelf Life: XM CX20000 • Can be applied to all suitably prepared surfaces above the waterline after adequate preparation 2.5 Litre 5-64011 – – – – – – – – – Jotun Mare Nostrum • Ease of application (thinning is not necessary) 750ml 5-64010 5-64012 5-64014 5-64016 5-64018 5-64020 5-64022 5-64024 5-64026 5-64028 Flag Cruising Flag Performance • Good gloss retention and long lasting finish Colour White Off White Cream Yellow Red Green Mid Blue Dark Blue Grey Black Seajet Shogun Seajet Emperor Seajet Coastal • Good quality one-part enamel Hempel Classic Features Nautical Eroding Antifouling Apply after a light wet sand. Wash with fresh water and allow to dry Seal with Nautical Underwater Primer SECTION 5 17 TK Colorspray Spray Paint for Engines TK COLORSPRAY - SPRAY PAINTS SPRAY PAINTS FOR ENGINES Fast drying spray lacquer that is fit for painting and repairs. It’s very weather resistant! ANTI-RUST PRIMERS Anti-rust primers have very low harmfulness, high resistance against scratches and very good adhesiveness. These primers help to make the next coat even and increase corrosion resistance. ANTI-FOULING SPRAY PAINT TK Anti-fouling is an antivegetative paint for the protection of gears and propellers in a practical spray package. It does not contain tin or copper compounds but carries out its action emanating organic non polluting poisons. Antivegetative with hard matrix indicated for average & high speed. Part No. 6-40090 6-40099 6-40100 6-40200 6-40201 6-40202 Description ANTI-RUST ZINC GREEN ANTI-RUST ZINC GREY ANTIFOULING CLEAR 400ml ANTIFOULING WHITE 400ml ANTIFOULING BLACK 400ml ANTIFOULING GREY 400ml Per 6 6 6 6 6 6 Description RED CAN YAMAHA OCEAN BLUE METALLIC YAMAHA MARINE BLUE '84 METALLIC MERCURY BLACK MARINER GREY MARINER LIGHT GREY METALLIC JOHNSON/EVINRUDE WHITE JOHNSON WHITE '81-'83 EVINRUDE BLUE '69-'82 METALLIC EVINRUDE SILVER '84 METALLIC EVINRUDE BLUE XP METALLIC SUZUKI GREY METALLIC SUZUKI GREY '89 METALLIC SUZUKI BLACK METALLIC HONDA GREY METALLIC TOHATSU GREY METALLIC TOHATSU AQUAMARINE BLUE AIFO MARINE RED VOLVO PENTA GREY MET.SX.DPX YANMAR GREY METALLIC ONAN IVORY VOLVO PENTA GREEN VOLVO PENTA AQUAMATIC VOLVO PENTA RED G.M. SILVER/BMW SILVER METALLIC MATT BLACK TRANSPARENT VOLVO AQUAMATIC 1989 VETUS YELLOW MOTORS NANNI BLUE METALLIC CATERPILLAR YELLOW YAMAHA DARKGREY MET 94 TK COLORSPRAY SPRAY PAINT ANTI-FOULING NON TOXIC SPRAY PAINT Combined nitro-acrylic paint for retouching marine engines Antifouling paint free of copper, arsenic and tin. Specification Finish: Vehicle: Pigment: Specification Finish: Vehicle: Pigment: Solvent: Density: Viscosity at 20°C: Solubility: Drying: Gloss Nitro-acrylic resin All pigments used are organic, free of heavy metals like Chromium or Lead. Solvent: Nitro-synthetic solvent mixture Density: 1.030 - 1.050 g/cm3 Viscosity at 20°C: 28" - 30" TF8. 70" - 110" TF4 Solubility: Insoluble in water. Removable with Acetone and/or nitro solvent. Coverage: With a 400ml can, a coverage of approx. 4m2 can be obtained. Drying: Fast-drying spray paint. Depending on atmospheric conditions, the dust-dry time varies between 10 & 15 minutes. Complete, thorough drying after 6-8 hours. 18 Part No. 6-40049 6-40050 6-40051 6-40052 6-40053 6-40054 6-40055 6-40056 6-40061 6-40062 6-40063 6-40066 6-40067 6-40068 6-40075 6-40077 6-40078 6-40081 6-40082 6-40083 6-40084 6-40085 6-40086 6-40088 6-40089 6-40091 6-40092 6-40093 6-40094 6-40095 6-40096 6-40098 SECTION 5 Use: Per 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 Colourless for clear. Semi-gloss for colours. Acrylic resin modified with organic poisons. Non-toxic pigments and extenders. Medium-high boiling mixture of aromatics 0.950 - 1.100 g/l 70 - 75 K.U. Solubility variable with the speed of the craft. Fast-drying spray varnish. Depending on atmospheric conditions, the dust-dry time varies between 10 & 20 minutes. It allows operation to be resumed with approx. 5-6 hours. Antifouling non-toxic super tropical for the protection of hulls or structures immersed in water. Free of metals, it prevents the formation of seaweed and the growth of molluscs. The binder, with programmed solubility, guarantees excellent protection. SEE SECTION 6 FOR COLOUR CHART Owatrol Coatings COATINGS OWATROL MARINE OIL DEKS OLJE D1 WOOD OIL Penetrating Rust Inhibitor • Stops rust and protects the base metal from further rusting • Penetrates and protects down to the sound metal • Drives out moisture and air and stabilises • Leaves a bonding film on all surfaces • Excellent adhesion including on galvanised steel, aluminium, zinc, wood • Maintains the natural look of the surface (metal, wood, etc.) • Enhanced adhesion, ideal foundation for primers or finishing coats • Allows paint to be applied direct to firm rust • Heat resistance up to +175°C Paint Conditioner • Makes alkyd paint rust inhibiting • Improved paint flow and workability • Better viscosity which allows painting to be carried out in cold, warm or windy conditions • Replaces damaging thinners; improves hiding power of paint • Deeply penetrates and seals wood 500ml 1 Litre • Protects metal parts 5-25002 5-25003 • Can be applied to both horizontal or vertical surfaces • Saturates and protects all woods – soft and hard; oily and dense • Excellent penetration – non-film forming • Replaces the natural oils lost from the wood – will not blacken the timber • Transparent – enhances the woods natural grain • Deep penetrating, stabilises the timber - protects against moisture ingress • Easy maintenance - no sanding or stripping • Used alone, gives a silken matt finish or overcoat 1 Litre 2.5 Litre with DEKS OLJE D2 for a high gloss finish 5-25010 5-25011 For use on: Ferrous and non ferrous metals, wood, plastics & glass Coverage: 18m²/l Application: Brush, Roller, Spray • Flexible film that does not crack, peel or flake • High gloss finish • Highly transparent varnish – enhances the natural beauty of the wood • Offers long term protection • No sanding between coats 1 Litre 2.5 Litre • Easy maintenance 5-25014 5-25015 • Easy repair, no stripping CIP CORROSIVE INHIBITING PRIMER • Universal rust inhibiting primer for all paint types - will not dissolve or break down when high solvent paints are applied • Penetrates and stabilises the surface, forming a solid stable layer that other coatings can firmly adhere to • Pigmentation offers increased protection and perfect film-forming qualities • Easy to use, no need for sanding or sandblasting • Use on new or rusted surfaces – interior and exterior • High temperature resistance up to 175 °c. • Especially recommended where a high resistant 500ml 2.5 Litre paint or two-pack finish (urethane, epoxy, 5-25004 5-25005 chlorinated rubber, synthetic) is to be applied For use in: all severe environmental conditions: marine or tropical climates, corrosive fumes, protection of motor vehicles, ballast tanks of ships as well as every day items e.g. railings Coverage: 15m²/l Application: Brush, Roller, Airless Spray OWATROL DECK CLEANER • Lightens & restores colour to all greyed weathered wood without bleaching • Cleans and neutralises staining caused by tannins • Removes all traces of weathering attributed to mould, mildew, pollution • Restores luster to plastics dulled by weathering and UV rays • Excellent degreaser for tropical hardwoods prior to 1 Litre applying DEKS OLJE D1 saturator 5-25008 • Non aggressive – harmless to plants and shrubs • Biodegradable – does not contain solvents or bleach (rinse with water) For use on: Exterior wood – weathered grey or dirty: Cedar, Larch, Pine, Teak, Iroko, Ipe. For cladding, fences, decks, plastic, GRP Coverage: 5 to 10m²/l Application: Stiff bristle brush For use on: Hardwoods and Tropical Timber (Oak, Chestnut, Teak, Mahogany, Movingui, Ipe, Bangkirai), Softwoods (Pine, Spruce, Larch). Interior or Exterior: boat decks, topsides on boats, flooring, paneling etc. Marine: Can be applied above or below the waterline, excellent primer for conventional single pack marine coatings Coverage: 4m²/l (multicoat) 12m²/l (maintenance) Application: brush, roller DEKS OLJE D2 WOOD OIL For use on: Exotic hardwoods (Teak, Ipe, Mahogany, Movingui, Bangkirai) new or weathered. Interior or Exterior: window & door frames, paneling etc. Horizontal & Vertical. Boats – all applications above waterline Coverage: 15m²/l Application: brush, roller GELCOAT RESTORER • Revives the colour and appearance of tarnished and dulled plastics and fibreglass (GRP) e.g boat hulls • Rejuvenates and restores flat and chalky paint and varnishes dulled by weathering 500ml • Restore the shine and protects chrome or polished metals: aluminium, chrome, brass, bronze 5-25018 For use on: GRP, painted surfaces, polished metals Coverage: 18m²/l Application: brush, rag OWATROL MARINE STRIP • Solvent free, non-flammable, no toxic fumes - is easily removed with water • Safe on all surfaces except Aluminium. Does not harm plastic, safe on G.R.P. • Very efficient - Will remove up to 8 coats of paint in one operation • Will not affect 2 component or baked-on paints, polyurethane paint & varnishes • Does not evaporate - long active work time. • Easy to apply Gel with prolonged stripping action. Does not run For use on: All surfaces except Aluminium Coverage: 4m²/l Application: brush, roller SECTION 5 1 Litre 5-25020 19 WEST SYSTEM Product Selector 105 SYSTEM PRODUCT SELECTOR By using a simple ‘cookbook’ approach it is possible to tailor the handling characteristics and the physical properties of the cured epoxy to suit the working conditions and specific application of the project in hand. 1. Begin with 105 Epoxy Resin, the basic ingredient of all WEST SYSTEM epoxy compounds 2. Control the cure time or adjust to working temperature or working time required with one of four specially formulated WEST SYSTEM hardeners 3. Select the correct set of Mini Pumps 4. Adjust the strength, weight, texture, sandability and colour of the cured epoxy with one of the eight WEST SYSTEM fillers. Adjust the viscosity of the resin/hardener mixture by the amount of filler added or provide specific coating properties with WEST SYSTEM additives. General Structural Wood Toned High Load General Wood GRP 20 SECTION 5 WEST SYSTEM Resin & Hardeners RESIN & HARDENERS 101 MINI PACK Contains a selected mix of materials used to complete smaller repairs around the boat, or in the workshop. Contents include: • 105 Resin (250g) • 205 Hardener (50g) • 403 & 407 fillers • Dispensing syringes • Application tools, gloves & instructions Part No. 5-65000 104 JUNIOR PACK A 600g pack of WEST SYSTEM epoxy (105/205). Designed for the small users. Part No. 5-65001 105-K FIBRE GLASS BOAT REPAIR KIT This kit includes all the materials required to complete a range of repairs to glass fibre boats. Part No. 5-65002 Contents: • 105 resin (250gm) • 205 hardener (50gm) • 402 milled glass • 409 microspheres blend • Three mixing cups • One reusable mixing stick • Two pairs nitrile gloves • Two glue brushes • Two syringes 105 EPOXY RESIN® 105 Epoxy Resin® is the base material on which all WEST SYSTEM 105 System epoxy compounds are built. The resin is a clear, pale yellow, low-viscosity liquid epoxy resin. Formulated for use with WEST SYSTEM hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance Part No. 5-65003 (1kg) Part No. 5-65007 (5kg) Part No. 5-65011 (25kg) • 1m x 125mm 450g/m² biaxial glass tape • 1m x 75mm 175g/m² plain weave glass tape • 1m x100mm peel ply, • Instructions RESIN & HARDENER PACKS A PACK 105 Epoxy Resin (1kg) with 205 Hardener (0.2kg) Part No. 5-65006 with 206 Hardener (0.2kg) Part No. 5-65015 205 FAST HARDENER® A medium-viscosity epoxy curing agent, it is used in a majority of situations, at lower temperatures, and to produce a rapid cure that develops its physical properties quickly at room temperature. When mixed with the 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Part No. 5-65004 (0.2kg) Part No. 5-65008 (1kg) Part No. 5-65012 (5kg) 206 SLOW HARDENER® A low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. When combined with 105 Resin in a five part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture resistant solid with excellent bonding and coating properties. Part No. 5-65005 (0.2kg) Part No. 5-65009 (1kg) Part No. 5-65013 (5kg) 207 SPECIAL COATING HARDENER™ Formulated for use with WEST SYSTEM 105 Resin for coating applications where an extremely clear finish is desired. This hardener also provides excellent adhesion for bonding applications. 207 contains an ultraviolet inhibitor to protect the 105/207 mix against sunlight. However, the cured epoxy surface still requires long-term UV protection with a quality marine paint or a UV filtered two part varnish. Part No. 5-65020 (0.29kg) Part No. 5-65022 (1.45kg) B PACK 105 Epoxy Resin (5kg) with 205 Hardener (1kg) Part No. 5-65010 with 206 Hardener (1kg) Part No. 5-65016 C PACK 105 Epoxy Resin (25kg) with 205 Hardener (5kg) Part No. 5-65014 with 206 Hardener (5kg) Part No. 5-65017 For Mini Pump Sets see next page 209 EXTRA SLOW HARDENER™ Formulated for use with WEST SYSTEM Brand 105 Resin for general coating and bonding applications in extremely warm and/or humid conditions or when extended working time is desired at room temperature. Provides approximately twice the working time of 206 Slow Hardener. Forms a clear, amber-coloured solid with good physical properties and moisture resistance for bonding and coating applications. Part No. 5-65023 (1.45kg) SECTION 5 21 WEST SYSTEM Epoxy & Adhesives SPECIALITY EPOXY & ADHESIVES MINI PUMP SETS 301 MINI PUMP SETS (5:1) Specially designed for convenient and accurate dispensing of WEST SYSTEM 105 Resin and 205 or 206 Hardeners. The pumps mount directly on the resin and hardener containers and have been calibrated to deliver the correct working ratio of 5 parts by volume of resin to 1 part by volume of hardener with one stroke from each pump. Part No. 5-65070 (Fits A Pack) Part No. 5-65071 (Fits B Pack) Part No. 5-65072 (Fits C Pack) ! WARNING: DO NOT USE 301 MINI PUMPS WITH 207 OR 209 HARDENERS. G/FLEX EPOXIES G/flex Epoxies are toughened, resilient two-part epoxies engineered for superior adhesion to metals, plastics, glass, fibreglass and wet or difficult-to-bond woods and is available in two consistencies: 303 SPECIAL RATIO MINI PUMP SETS (3:1) Designed for convenient and accurate dispensing of WEST SYSTEM 105 Resin and 207 Special Coating Hardener or 209 Extra Slow Hardener. The mini pumps mount directly on the resin and hardener containers and have been calibrated to deliver the correct working ratio of 3 parts by volume of resin to 1 part by volume of hardener with one stroke from each pump. WARNING: DO NOT USE 303 Part No. 5-65073 (Fits A Pack) SPECIAL RATIO MINI PUMPS Part No. 5-65074 (Fits B Pack) WITH 205 OR 206 HARDENERS. ! G/flex 650 is a versatile easily-modified liquid epoxy and G/flex 655 is a convenient pre-thickened epoxy. Both have an easy-to-use 1:1 mix ratio and provide a relatively long open working time, yet they cure quickly and can be used in cool temperatures. G/FLEX 650-K REPAIR KIT G/FLEX 650-8 EPOXY G/FLEX 650-32 EPOXY 236ml Pack Contains: 1 Litre Pack Contains: • 118ml of G/flex 650 Resin • 118ml of G/flex 650 Hardener Part No. 5-65040 • 500ml of G/flex 650 Resin • 500ml of G/flex 650 Hardener Part No. 5-65041 G/FLEX 650-2GR EPOXY 4 Litre tin • 4 Litre tin of G/flex 650 Resin only Part No. 5-65042 G/FLEX 650-2GH EPOXY 4 Litre tin • 4 Litre tin of G/flex 650 Hardener only Part No. 5-65043 Kit contains handling & repair instructions and: • 118ml G/flex 650 resin • 118ml G/flex 650 hardener • 2x reusable mixing stick/applicators • 2x 12 cc syringes • 4g adhesive filler • 4x mixing cups • 1 pair disposable neoprene gloves • 4x alcohol cleaning pads Part No. 5-65048 G/FLEX 655-K REPAIR KIT Kit contains handling & repair instructions and: • 125ml - G/flex 655 resin • 125ml - G/flex 655 hardener (250ml mixed epoxy) • 2x reusable mixing stick/applicators • 4x alcohol cleaning pads • 1 pair disposable neoprene gloves • 10 mixing palettes Part No. 5-65056 ADHESIVES G5 RAPID ADHESIVE SIX10 ADHESIVE An easy-to-use two part, fast setting resin/hardener system. This adhesive is ideal for quick repairs and general bonding around the boat and in the home, the workshop or garage. It is suited for spot applications to hold component parts in position whilst bonding is completed with WEST SYSTEM epoxy. G5 will adhere to most prepared surfaces including wood, fibreglass and most metal and cures in 4-5 minutes. Combines the strength and reliability of a two-part WEST SYSTEM® brand epoxy with point-and-shoot convenience. The self-metering coaxial cartridge dispenses a gap-filling structural epoxy that bonds tenaciously to wood, metals, fiberglass and concrete. The tube comes with a static mixer that lets you lay down a bead of thickened epoxy with any standard caulking gun. Part No. 5-65030 (200g) 22 SECTION 5 Part No. 5-65037 (190ml) Part No. 5-65038 (Static Mixer for Six10) WEST SYSTEM Fillers & Additives FILLERS & ADDITIVES 402 Milled Glass Fibre Blend A high density blended filler consisting of loose chopped glass and other fillers, intended for small semi structural repairs, filling voids, or small scale impact damage to glass fibre laminates. The finished repairs are incredibly strong, tough & resilient. Part No. 5-65090 (0.15kg) Part No. 5-65091 (1kg) 403 Microfibres A fine fibre blend, used as a thickening additive with resin/hardener to create a multipurpose adhesive, especially for bonding wood. Epoxy thickened with microfibers has good gap-filling qualities while retaining excellent wetting/penetrating capability. Part No. 5-65093 (150g) Part No. 5-65094 (750g) Part No. 5-65095 (3.2kg) 404 High-Density Filler A thickening additive developed for maximum physical properties in hardware bonding where high-cyclic loads are anticipated. Can also be used for filleting and gap filling where maximum strength is necessary. Part No. 5-65097 (250g) Part No. 5-65098 (1.75kg) 405 Filleting Blend Filler This strong, wood-toned filler is good for use in glue joints and fillets on naturally finished wood. It mixes easily with epoxy and its colour is a consistent brown, so 405 can be used to modify the shade of other WEST SYSTEM fillers. Part No. 5-65100 (150g) Part No. 5-65101 (0.7kg) Part No. 5-65102 (5.0kg) 407 Low-Density Filler Blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong on a strength-to-weight basis. Cures to a dark red/brown colour. Part No. 5-65107 (150g) Part No. 5-65108 (700g) Part No. 5-65109 (3.5kg) Part No. 5-65110 (15kg) 409 Microsphere Blend Filler A pure white, hollow glass bubble based, low density filler designed for filling and fairing of fibreglass. Part No. 5-65111 (100g) Part No. 5-65112 (0.4kg) 410 Microlight™ Filler The ideal low-density filler for creating a light, easily-worked fairing compound especially suited for fairing large areas. Microlight mixes with greater ease than low density filler or microballoons and is approximately 30% easier to sand. It feathers to a fine edge and is more economical for large fairing jobs. Not recommended under dark paint or other surfaces subject to high temperatures. Cures to a tan colour. Part No. 5-65114 (50g) Part No. 5-65115 (0.2kg) Part No. 5-65116 (1.5kg) 406 Colloidal Silica A thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical & overhead joints. It is a very strong & most versatile filler that creates a smooth mixture, ideal for general bonding and filleting. Often used in combination with other fillers, it can be used to improve strength, abrasion resistance, and consistency of fairing compounds, resulting in a tougher, smoother surface. Part No. 5-65103 (60g) Part No. 5-65104 (275g) Part No. 5-65105 (1.5kg) Part No. 5-65106 (10kg) 420 ALUMINIUM POWDER 422 BARRIER COAT ADDITIVE™ Add between 5 to 10% by volume to provide protection from ultraviolet light in areas which will not be protected with other coatings and as a base for subsequent painting. Will substantially increase the hardness of the coated surface. Part No. 5-65150 (0.1kg) A proprietary blend designed to improve the moisture exclusion effectiveness of WEST SYSTEM epoxy. Also increases the abrasion resistance and is an excellent additive for providing a barrier coating to help prevent gelcoat blistering. Add 20 to 25% by weight of 422 to the mixed epoxy. Part No. 5-65152 (0.5kg) Part No. 5-65153 (3kg) 423 GRAPHITE POWDER 425 COPPER COMPOUND A fine black powder added to WEST SYSTEM epoxy (10% by volume) to produce a low friction exterior coating with increased scuff resistance, durability and mar resistant. Epoxy/graphite is commonly used as a coating on rudders and centreboards, or on the bottoms of racing craft that are dry sailed. The epoxy/graphite mix can also be used in teak deck construction to simulate traditional seams in appearance and to protect the resin from sunlight. Part No. 5-65154 (0.2kg) Part No. 5-65155 (3kg) Can be added to the mixed epoxy to provide a base coat for conventional bottom paint. When added to the epoxy at the rate of 80% by weight, the resultant hard surface increases the moisture exclusion effectiveness, abrasion resistance and provides some back up antifouling properties. Can be used for any coating application when a harder surface is required, e.g. coating moulds. Part No. 5-65156 (0.5kg) Part No. 5-65157 (2.5kg) COLOURING ADDITIVES WEST SYSTEM colour pigments can be added to the epoxy to provide a base colour for a final finish system. The coloured surfaces also tend to highlight flaws and imperfections. Pigments should be added at a rate of approximately 3 to 5 % by weight and should only be added to the final coat of epoxy because the increased viscosity of the mix will impair the ability of the epoxy to penetrate and seal surfaces. Colour 501 White 502 Black 505 Blue 506 Grey Part No. 5-65165 5-65167 5-65169 5-65171 125g Pots SECTION 5 23 WEST SYSTEM Glass Tape & Fabrics GLASS TAPE & GLASS CLOTH GLASS TAPE Description Biaxial Biaxial Plain Weave Plain Weave Plain Weave Plain Weave Plain Weave Plain Weave Plain Weave Plain Weave Plain Weave Plain Weave For use in taping seams and joints, biaxial tape is good for small repairs. Biaxial Plain Weave Weight 450g/m2 450g/m2 175g/m2 175g/m2 175g/m2 175g/m2 175g/m2 175g/m2 175g/m2 175g/m2 175g/m2 175g/m2 Size 125mm x 5m 125mm x 90m 25mm x 10m 25mm x 50m 50mm x 10m 50mm x 50m 75mm x 10m 75mm x 50m 100mm x 10m 100mm x 50m 150mm x 10m 150mm x 50m Part No. 5-65185 5-65186 5-65187 5-65188 5-65189 5-65190 5-65191 5-65192 5-65193 5-65194 5-65195 5-65196 GLASS FABRIC, GLASS CLOTH AND PEEL PLY SATIN WEAVE GLASS CLOTH (135g/m²) BIAXIAL GLASS FABRIC (±45°) 5-65201 PLAIN WEAVE GLASS CLOTH (200g/m²) For use in general sheathing work on hulls and decks, etc. 5-65225 Weight 300g/m2 300g/m2 300g/m2 300g/m2 610g/m2 610g/m2 610g/m2 610g/m2 450g/m2 450g/m2 450g/m2 450g/m2 Size 1.26m x 5m 1.26m x 10m 1.26m x 25m 1.26m x 50m 1.25m x 5m 1.25m x 10m 1.25m x 25m 1.25m x 50m 1.25m x 5m 1.25m x 10m 1.25m x 25m 1.25m x 50m Part No. 5-65200 5-65201 5-65202 5-65203 5-65204 5-65205 5-65206 5-65207 5-65208 5-65209 5-65210 5-65211 PEEL PLY A finely woven fabric treated with a release agent to which epoxy will not bond. Excellent for providing a release and reducing subsequent sanding prior to applying more epoxy. 24 5-65220 General purpose fabric for use in sheathing, repair, in mould laminating etc. Available in 300g/m2, 610g/m2 and 450g/m2. 5-65204 Description Biaxial Glass Fabric Biaxial Glass Fabric Biaxial Glass Fabric Biaxial Glass Fabric Biaxial Glass Fabric Biaxial Glass Fabric Biaxial Glass Fabric Biaxial Glass Fabric Biaxial Glass Fabric Biaxial Glass Fabric Biaxial Glass Fabric Biaxial Glass Fabric For use in sheathing lightweight structures such as canoes and models. SECTION 5 Description Satin Weave Glass Cloth Satin Weave Glass Cloth Satin Weave Glass Cloth Plain Weave Glass Cloth Plain Weave Glass Cloth Plain Weave Glass Cloth Plain Weave Glass Cloth Plain Weave Glass Cloth Description Peel Ply Plain Weave Cloth Peel Ply Plain Weave Cloth Peel Ply Plain Weave Cloth Peel Ply Tape Peel Ply Tape Weight 135g/m2 135g/m2 135g/m2 200g/m2 200g/m2 200g/m2 200g/m2 200g/m2 Size 1m x 5m 1m x 10m 1m x 25m 1m x 1m 1m x 5m 1m x 10m 1m x 25m 1m x 50m Part No. 5-65220 5-65221 5-65222 5-65225 5-65226 5-65227 5-65228 5-65229 Weight 83g/m2 83g/m2 83g/m2 83g/m2 83g/m2 Size 0.5m x 100m 1m x 100m 1.25m x 100m 50mm x 100m 100mm x 100m Part No. 5-65260 5-65262 5-65264 5-65265 5-65266 WEST SYSTEM Application Tools APPLICATION TOOLS GLUE APPLICATION BRUSHES ROLLERS & FRAMES Handy, disposable, glue brushes with a wooden handle. These brushes are used for a wide variety of gluing and coating applications. Part No. 5-65282 (5 Pack) 7'' FOAM ROLLER COVERS REUSABLE PLASTIC MIXING STICKS A practical mixing, application, filleting, and cleaning tool. The squared, bevelled end reaches mixing pot corners for thorough mixing and blending in fillers and for cleaning up excess epoxy. Use rounded end to shape 10mm radius fillets. Cured epoxy pops off easily, so they can be reused many times. Part No. 5-65283 (8 sticks) Part No. 5-65284 (25 sticks) WOODEN STIRRERS 300mm x 27mm, square edged wooden stirrers will ensure thorough mixing when high percentages of fillers are incorporated into the epoxy. Strong, durable stirrers that are ideal for scraping excess epoxy from surfaces. Part No. 5-65285 (5 Pack) 800ml MIXING POT Strong reusable 800ml mixing pots graduated in 50ml divisions. When cured, solid epoxy easily “pops out” of these reusable plastic mixing pots. Part No. 5-65286 PLASTIC SQUEEGEES 180mm wide, 45mm diameter, foam roller cover. Part No. 5-65276 (6 Pack) Part No. 5-65276/1 (each) 7'' ROLLER FRAME 180mm wide bird cage roller frame designed for use with the 5-65276 roller cover. Part No. 5-65277 3'' FOAM ROLLER COVERS 75mm wide foam roller cover - ideal for coating epoxy in small areas. Part No. 5-65279 (12 Pack) Part No. 5-65279/2 (2 Pack) 3'' ROLLER FRAME Reusable 75mm wide roller frames for use with the 5-65279 roller covers. Part No. 5-65280 ROLLER TRAY Flexible plastic roller tray allows cured epoxy to ‘pop out’, so the pan can be reused. Eliminates the need for liners. Part No. 5-65281 SYRINGES Reusable syringes which can be loaded with the epoxy for injecting into difficult working areas. Ideal for hardware bonding and plywood repairs. Lightweight, reusable squeegees for fairing and filling applications. Double-edged, 90mm x 150mm. Part No. 5-65290 (2 Pack) Part No. 5-65287 (1 x 10ml + 1 x 50ml) Part No. 5-65288 (2 x 10ml) Part No. 5-65289 (2 x 50ml) NOTCHED SPREADER PADDLE ROLLERS 110mm × 110mm Lightweight, reusable spreaders with 3mm, 4mm and 6mm notches on three sides for quickly applying modified epoxy at a constant rate. Useful when laminating large panels Part No. 5-65292 (2 Pack) Ridged aluminium rollers for thoroughly wetting-out fabrics with epoxy. Diameter: 22mm (7⁄8 ''). Part No. 5-65294 2'' (50mm) Part No. 5-65295 6'' (150mm) WEST SYSTEM VACUUM BAGGING KIT & INSTRUCTIONS A complete starter kit for room temperature repairs and small laminating projects up to 1.2m² in size. The kit includes: • Venturi vacuum generator (with bronze muffler) • Vacuum Cups (3) • 6mm ID Vacuum Tubing (3m) • Vacuum Gauge • Junction “T” Barbs (2) • Release Fabric (1.4m²) • Breather Fabric (1.4m²) • Vacuum Bag Film (1.4m²) • Vacuum Bag Sealant (7.5m) • Instruction leaflet: 002-150 Vacuum Bagging Techniques Part No. 5-65331 SECTION 5 25 WEST SYSTEM Cleaning & Publications CLEANING & SAFETY EQUIPMENT 820 RESIN REMOVING CREAM NITRILE GLOVES Formulated to remove uncured epoxy from skin. Available in 250ml dispensers or 1kg plastic pots. Part No. 5-65310 (250ml) Part No. 5-65311(1kg) Lightweight, seamless disposable gloves help prevent exposure to chemicals. Excellent protection with good finger sensitivity and dexterity. CE marked. Part No. 5-65314 (50 Pairs) Part No. 5-65315 (5 Pairs) 831 BARRIER CREAM Contains a non-irritant, multi-purpose barrier cream which has special bactericidal ingredients to minimise the risk of skin infection. Protects against resins, oils, grease and petroleum spirits. Part No. 5-65312 (250ml) Part No. 5-65313 (1kg) 850 CLEANING SOLVENT A specially blended cleaning solvent for removing uncured epoxy from tools, boat and workshop surfaces. Also excellent for cleaning contaminants from cured epoxy surfaces. Part No. 5-65317 (1 Litre) Part No. 5-65318 (2.5 Litre) WEST SYSTEM PUBLICATIONS How-To DVD A compilation of three instructional videos demonstrating basic handling and advanced techniques, including Basic Application Techniques; Fibreglass Repair with WEST SYSTEM Epoxy and Gelcoat Blister Repair with WEST SYSTEM Epoxy. Interactive menus allow for easy navigation through these subjects. Part No. 5-65342 Gougeon Brothers Boat Construction Book Decades of experience building with wood and epoxy are compiled in this 5th edition, completed in 2005. New and updated material is combined with proven technology in a revised layout for navigation. Extensive chapters on hardware bonding, construction methods, safety and tools are described with the aid of hundreds of detailed illustrations and photographs. Used as a textbook in boatbuilding schools. Over 100,000 copies in print. Part No. 5-65343 Fibreglass Boat Repair & Maintenance Book A complete guide to repair fibreglass boats with WEST SYSTEM epoxy. Includes illustrated procedures for structural reinforcement, deck and hull repair, hardware installation, keel repair and teak deck installation. Part No. 5-65345 Gelcoat Blisters: Diagnosis, Repair & Prevention Book A guide for repairing and preventing gelcoat blisters in fibreglass boats with WEST SYSTEM epoxy. Includes an analysis of the factors that contribute to blister formation and illustrated steps for preparation, drying, repairing and coating for moisture protection. Part No. 5-65346 Final Fairing & Finishing Book Techniques for fairing wood, fibreglass and metal surfaces. Includes fairing tools, materials and a general guide to finish coatings. Part No. 5-65347 Wooden Boat Restoration & Repair An illustrated guide to restore the structure, improve the appearance, reduce the maintenance and prolong the life of wooden boats with WEST SYSTEM epoxy. Includes information on dry rot repair, structural framework repair, hull and deck planking repair, hardware installation with epoxy and protective coating. Part No. 5-65348 26 SECTION 5 855 CLEANING SOLUTION A safe, easy to use cleaning solution developed to remove uncured epoxy from tools workbenches, minipumps etc. Can also be used to wash off amine blush. Part No. 5-65319 (1 Litre) ProLoc Sealants & Adhesives BOAT MAINTENANCE Application Areas: General sealing and filling applications in both interior and exterior. Instructions: Surfaces must be clean, dry and free from dust and grease. A neutral cure, high performance silicone sealant designed for gap filling and sealing applications in marine constructions. It combines outstanding adhesion to various surfaces with non-corrosive and odourless curring mechanism. • 100% silicone • Solvent free • Anti-mould • Excellent primerless adhesion to numerous porous and non-porous substrates including: glass, painted metal, fibreglass, non-oily woods, plastics and abraided rubber • Non-corrosive: does not react with or corrode common construction materials • Excellent resistance to marine environment • Resistant to temperature extremes (– 60 °C and +180 °C) • Fast curing • High elasticity PROLOC MARINE SEALANT 246 A one component, polyurethane based marine sealant and adhesive that bonds extremely well to all common materials used in marine construction. • Excellent adhesion and sealing capacity • Fast cure • High elasticity • Thixotropic: excellent performance in vertical surfaces • Resists salt water • Paintable • Sandable PROLOC MARINE LIQUID NAIL 244 A one component polyurethane based fast and strong adhesive especially designed to meet the standards of the marine industry. • Excellent bonding without screw or nail • Suitable for both interior and exterior applications • Suitable for almost all kind of construction materials • Applicable even in wet surfaces • Tixotropic; excellent performance in vertical surfaces • D4 according to DIN EN 204 • Paintable • Sandable • Solvent free PROLOC MARINE HEAVY DUTY ADHESIVE 247 A one component high viscosity polyurethane adhesive especially designed to meet the standards of the marine industry. Unlike common polyurethane wood adhesives, it does not foam up uncontrollably. • Low foaming • High adhesion strength • Long open time: gives sufficient working time. • Sea water and fresh water resistant • Excellent resistance to aging and marine environment • Fire rated • D4 according to DIN EN 204 • Solvent free • Sandable & paintable NEW RANGE PROLOC MARINE 100% SILICONE SEALANT 200 Colour Black White Grey Clear Size 310ml 310ml 310ml 310ml Box Qty 24 24 24 24 Part No. 5-70317 5-70318 5-70319 5-70320 For single cartridges add /1 to part no. e.g 5-73017/1. Application Areas: Multipurpose marine grade sealant and adhesive suitable for making permanently elastic, vibration resistant joint seals. It can be used for almost all common surfaces; both interior and exterior sealing and bonding applications in marine construction and maintenance industries. Instructions: Recommended application temperature is between +5 °C and +40 °C. Surfaces must be dry, clean and free from dust and grease. Colour Black White Grey Size 310ml 310ml 310ml Box Qty 24 24 24 Part No. 5-70306 5-70307 5-70308 Single Part No. 5-70306/1 5-70307/1 5-70308/1 Application Areas: Perfect formulation for all bonding applications where a permanent strong bond is required between porous to porous and porous to non-porous surfaces in both OEM and aftermarket. It can be used various kind of construction materials such as wood, MDF, cement, metal, marble, granite, ceramic, rubber ant etc. Instructions: Recommended application temperature is between +5 °C and +40 °C. Surfaces must be clean and free from dust and grease. Apply the adhesive to one or both surfaces and join the parts within 5 minutes. Press the surfaces at least 15 minutes if needed. Colour Clear Size 310ml Box Qty 24 Part No. 5-70316 Single Part No. 5-70316/1 Application Areas: Suitable for interior and exterior bonding applications of wood and wood based materials, metals, natural stones, ceramic, rubber etc. Instructions: Surfaces must be clean, dry and free from dust and grease. One of the substrates must be porous to ensure better curing. Application quantity is 100-300 g/m2. Apply the adhesive with a brush as thin film to one or both surfaces and join the parts within 20 minutes. Press the elements together – if needed - at least 2-3 hours. Colour Beige Size 800g Box Qty 12 Part No. 5-70329 SECTION 5 Single P/No. 5-70329/1 27 ProLoc Adhesives, Glazing & Deck Caulking NEW RANGE BOAT MAINTENANCE PROLOC MARINE STRUCTURAL ADHESIVE 242 PROLOC MARINE GLAZING ADHESIVE 245 A one component, MS Polymer based marine structural adhesive especially designed for marine constructions. • Very high final adhesion strength • Excellent elasticity • Excellent shock absorbing and vibration damping properties • Withstand high dynamic stresses • No shrinkage • Paintable • Primerless application possible A one component, polyurethane based direct glazing adhesive designed for use on all types of mineral glass windows. Application Areas: Structural joints in marine constructions are subject to high dynamic stresses. It is suitable to use on wood, metal, ceramic, plastic and etc. Instructions: Recommended application temperature is between +5 °C and +35 °C. Surfaces must be clean, dry and free from dust and grease. Application Areas: Direct glazing applications in both OEM & marine repair market. Instructions: Recommended application temperature is between +10 °C and +35 °C. Surfaces must be clean, dry and free from dust and grease. Colour White Size 290ml Box Qty 24 Part No. 5-70302 Single Part No. 5-70302/1 Colour Black Size 300ml Box Qty 24 Part No. 5-70312 Single Part No. 5-70312/1 PROLOC MARINE UV GLAZING ADHESIVE 235 PROLOC MARINE DECK CAULK 291 A one component polyurethane based direct glazing adhesive designed for use on acrylic and polycarbonate based windows. A one component MS Polymer based joint sealing compound especially designed for caulking in traditional timber decking. • High initial bonding strength • UV resistant • Fast cure • Excellent non-sag properties • High mechanical performance • Resistant to aging and marine environment • Paintable • Primerless application possible (for best result primer use is recommended) • Excellent adhesion capacity • High UV resistance • Excellent resistance to aging & marine environment • High elasticity • Paintable • Sandable • Resistance to sea water and fresh water • Isocyanate free • Solvent free Application Areas: Direct glazing applications in both OEM and marine repair market. Instructions: Recommended application temperature is between +10 °C and +35 °C. Surfaces must be clean, dry and free from dust and grease. Application Areas: Joint caulking applications of traditional timber decking in marine constructions. Instructions: Recommended application temperature is between +5 °C and +40 °C. Surfaces must be clean, dry and free from dust and grease. Colour Black Size 300ml Box Qty 24 Part No. 5-70314 Single Part No. 5-70314/1 PROLOC MARINE PR102 GLAZING PRIMER PR102 is a polyurethane based solvent containing primer designed for pre-treating plastic substrates prior to bonding with polyurethane elastic adhesives. • Liquid • Resistance against water Size 250ml 28 • High initial bonding strength • Fast cure • Excellent non-sag properties • High mechanical performance • Resistant to aging and marine environment • Paintable • Primerless application possible (for best results primer use recommended) Qty Each Part No. 5-70337 SECTION 5 Colour Black Size 290ml Box Qty 24 Part No. 5-70300 Single Part No. 5-70300/1 Application Areas: Suitable for plastic surfaces such as Acrylic (PMMA), polycarbonate and surfaces painted with acrylics, alkyd/melamin. Instructions: Recommended application temperature is between +5 °C and +40 °C. Surfaces must be clean, dry and free from dust and grease. ProLoc Deck Bedding, Foams & Decking Primer BOAT MAINTENANCE PROLOC MARINE PU FOAM 215 (HAND) A one-component polyurethane adhesive that cures on exposure to atmospheric humidity to form a strong and elastic elastomer. It is specially designed for bonding deck covering materials. A single component, moisture curing, self expanding, hand grade, polyurethane foam especially designed for requirements of the marine industry. • Suitable for common construction materials (except Teflon, PP, PE) • High expanding capacity • Excellent adhesion and filling properties • Conforms to fire class B1 according to DIN 4102 • Ozone friendly • Can be cut and trimmed after cured • Paintable • Permanently flexible • Slightly thixotropic • Easy to apply • Long open time • Sound deadening • Paintable • Weather resistant • Sandable • Cushioning effect absorbing shocks Application Areas: Flexible bonding of timber strip decking, deck planking, plastic deck coverings and prefabricated timber deck panels. Instructions: Recommended application temperature is between +10 °C and +35 °C. Surfaces must be clean, dry and free from dust and grease. Colour Black Size 310ml Box Qty 24 Part No. 5-70304 Single Part No. 5-70304/1 Application Areas: 215 is an alternative fire resistant filling material to fill large gaps in marine construction activities that requires sound, air and vibration insulation. Instructions: Surfaces must be clean and free from dust and grease. Shake the can well before use. Hold the can upside down and activate the foam by pressing the valve. Moistening the surfaces before and after the application ensures faster curing and increase the bonding strength. Colour – Size 750ml Box Qty 12 Part No. 5-70331 Single Part No. 5-70331/1 PROLOC MARINE PU FOAM 216 (GUN) PROLOC MARINE LINE PR101 DECKING PRIMER A single component, moisture curing, self expanding, gun grade, polyurethane foam especially designed for requirements of the marine industry. PR101 is a polyurethane based solvent containing primer designed for pre-treating timber decking strips before caulking. • Suitable for common construction materials (except Teflon,PP,PE) • Low expanding property • Excellent adhesion and filling properties • Conforms to fire class B1 according to DIN 4102 • Ozone friendly • Can be cut and trimmed after cured • Paintable • Liquid • Transparent • Resistance against water Application Areas: For priming wooden deck parts such as Teak, Mahogany, Oregon Pine, Cork, GRP and etc. Application Areas: 216 is an alternative fire resistant filling material to fill narrow and linear gaps in marine construction activities that requires sound, air & vibration insulation. Instructions: Surfaces must be clean and free from dust and grease. Shake the can well before use. Hold the can upside down and activate the foam by pressing the trigger of gun. Moistening the surfaces before and after the application ensures faster curing and increase the bonding strength. Colour – Size 750ml Box Qty 12 Part No. 5-70332 NEW RANGE PROLOC MARINE BEDDING ADHESIVE 248 Instructions: Recommended application temperature is between +5 °C and +40 °C. Surfaces must be clean, dry and free from dust and grease. Size 250ml Qty Each Part No. 5-70336 Single Part No. 5-70332/1 See next page for application guns >>> SECTION 5 29 ProLoc Lubricants & Application Guns BOAT MAINTENANCE NEW RANGE PROLOC MARINE A40 MAGIC CORROSION INHIBITOR A40 MAGIC is an corrosion inhibitor, lubricant and multi purpose protector aerosol spray. With it’s special formula it combines many properties such as cleaning, lubricating, loosening rusted part, driving out moisture. It can be used in industrial, home and daily labors. • Ultimate penetrating ability • Loosens rusted or corroded bolts, nuts, cables and any other fasteners • Greases and loosens door and window hinges, locks, and other fittings • Decreases frictions and stops squeaks of pedals, chairs, windows, faucets and hinges • Does not contain silicone and any dirty trap additives • Penetrates into water, drives it out of surface and dries it fast, thus provides longtime corrosion inhibiting effect • Protects metal parts against rust • Provides maintenance by penetrating into surface and protects it against dirt • Dissolves tar, gum, adhesive and etc • Permeates into grease and dirt and creates a protective film layer on the surface • Long lasting polishing effect. PROLOC MARINE SILICONE LUBRICANT 280 A silicone based lubricant and mould separator used in plastic, natural rubbers, rubber, metal as well as in many industrial applications. • Excellent protection capacity • Highly water resistant • Eliminates squeaking, binding and sticking • Excellent release properties • Effective over a wide range temperature (-40 °C and +200 °C) • Does not leave any sediment on hot surfaces Application Areas: A40 has lots of applications. In all fittings, door and window mechanisms, locks, handles, hinges. It removes water on metallic surfaces of bikes, motorbikes, small motor vehicles, electronic contacts and other home tools such as drills, jigsaws, etc. Also for loosening of rusted and jammed mechanisms, can be used as protective agent on surfaces vulnerable to water and rust, and for dissolving adhesive materials like tar, gum, adhesive tapes etc. Size 200ml 400ml Box Qty 24 24 Part No. 5-70339 5-70340 Single Part No. 5-70339/1 5-70340/1 Application Areas: Prevention of hardening and freezing of rubber seals. Prevents plastic assemblies from squeaking and binding. Provides excellent lubrication properties on surfaces. It can be used as a release agent in the moulding of plastic and rubber parts. Size 400ml Box Qty 12 Part No. 5-70333 Single Part No. 5-70333/1 APPLICATION GUNS PROLOC MARINE CARTRIDGE GUN Fits standard sealant cartridges. Part No. 5-70341 (each) PROLOC MARINE FOAM GUN Fits PU Foam 216 (5-70332). Part No. 5-70344 (each) 30 SECTION 5 PROLOC MARINE MULTI GUN Fits standard sealant cartridges and bulk. Part No. 5-70342 (each) PROLOC MARINE TEFLON FOAM GUN (HD) Fits PU Foam 216 (5-70332). Part No. 5-70345 (each) Dow Corning & Geocel Products SEALANTS & ASSOCIATED PRODUCTS GEOCEL® MARINE SILICONE SEALANT A silicone rubber sealant that fills and caulks gaps, joints and cracks around the boat. Ideal for sealing fittings on decks and bulkheads including hatches, portlights and windows providing a watertight seal. Part No. 5-70000 5-70000/1 5-70001 5-70001/1 5-70002 5-70002/1 Box Qty 6 x 78g Injector 78g Injector 6 x 78g Injector 78g Injector 6 x 78g Injector 78g Injector Colour Clear Clear White White Black Black 5-70010 5-70010/1 5-70011 5-70011/1 5-70012 5-70012/1 12 x 310ml Cartridge 310ml Cartridge 12 x 310ml Cartridge 310ml Cartridge 12 x 310ml Cartridge 310ml Cartridge Clear Clear White White Black Black GEOCEL® FIRE BLOCK SEAL High Temperature Resistant Sealant A ready mixed and ready to use new generation fire cement that will withstand temperatures up to 1500°C. Suitable for sealing joints on solid fuel stove flues. Bulk Pack: 12 x 310ml cartridges: Part No. 5-70020 Single: 310ml cartridge: Part No. 5-70020/1 GEOCEL® SILICONE SEALANT REMOVER DOW CORNING® 785+ A gel for removing unwanted cured silicone sealant. It is therefore, ideal for the refurbishment of sanitaryware, door or window frames, worktops etc. It is also suitable for removing cured silicone where product has been mistakenly applied. Bacteriostatic Sanitary Silicone Sealant Bulk Pack: 6 x 100ml tubes: Part No. 5-70028 Single: 100ml tube: Part No. 5-70028/1 GEOCEL UNIVERSAL CLEANING WIPES ® Protects against bacteria growth, MRSA, E. Coli and Salmonella. It is a one component silicone sealant that gives excellent adhesion to most non-porous surfaces. The product contains fungicide to resist mould growth and provides a water resistant hygienic seal around sanitary fittings. Bulk Pack: 12 x 310ml cartridges (white): Part No. 5-70032 Single: 310ml cartridge (white): Part No. 5-70032/1 Ideal for wiping away excess uncured silicone and other sealants as well as dirt, oil and grease. Tub of 150 wipes: Part No. 5-70029 GEOCEL® TRADE MATE SILICONE PLUMBA FLUE High Temperature Silicone Sealant A one component, high temperature acetoxy silicone sealant suitable for use on non-porous surfaces and ideal for sealing gas flues. Once cured, Trade Mate Plumba Flue is able to withstand temperatures of up to 300ºC for short term exposure and 250ºC for long term exposure. Suitable for sealing gas flue and chimney terminals. Bulk Pack: 12 x 310ml cartridges (Black): Part No. 5-70031 Single: 310ml cartridge (Black): Part No. 5-70031/1 EASIFLOW HD METAL CARTRIDGE GUN Heavy duty sealant gun for 310ml 400ml cartridges Part No. 5-70200 SPARE NOZZLES fits all Geocel cartridges apart from 5-70042 (Quickgrip Supergrab). Part No. 15-70000-1 SECTION 5 31 Dow Corning & Geocel Products SEALANTS & ASSOCIATED PRODUCTS GEOCEL JOINERS MATE® 5 5 Minute Rapid Wood Adhesive This rapid wood adhesive is a clear one part moisture curing wood adhesive, which sets hard in 5 minutes. It is a thixotropic gel with exceptionally high bond strength, resistant to most chemicals, and 100% seawater proof. Bonds wood, metal and various plastics. Bulk Pack: 12 x 310ml cartridges: Part No. 5-70036 Single: 310ml cartridge: Part No. 5-70036/1 APPLICATION GUNS CARTRIDGE GUN Fits standard sealant cartridges. Part No. 5-70341 (each) MULTI GUN GEOCEL JOINERS MATE LIQUID ® Liquid Wood Adhesive This wood adhesive is a one part, rapid curing, water resistant polyurethane adhesive for joiners. It is a moisture curing liquid, which expands slightly to increase bite strength. Bonds wood, metal and various plastics. Bulk Pack: 6 x 500ml bottles: Part No. 5-70035 Single: 500ml bottle: Part No. 5-70035/1 GEOCEL JOINERS MATE® MITRE BOND Fits standard sealant cartridges and bulk. Part No. 5-70342 (each) FOAM GUN Instant Bonding System A two part professional instant bonding system comprising of an adhesive and aerosol activator. It is simple to use and bonds in 10 seconds. Bonds MDF, wood, rubber, metal and most plastics. Bulk Pack: 6 x 50g adhesive with 200ml activator: Part No. 5-70038 Single: 50g adhesive with 200ml activator: Part No. 5-70038/1 Fits PU Foam 216 (5-70332). Part No. 5-70344 (each) PROLOC MARINE TEFLON FOAM GUN (HD) For Masking Tapes see page 37 Fits PU Foam 216 (5-70332). Part No. 5-70345 (each) 32 SECTION 5 Polyurethane Sealants / Adhesives POLYURETHANE SEALANTS SEALANTS COVERAGE CHART (310ml Cartridges) DEPTH Technical Specifications Korapur 925 Application Temp.: +5ºC to +35ºC WIDTH Service Temp.: -40ºC to +90ºC 3mm 5mm 9mm 12mm Skin (Tack Free) Time*: 45 mins* Cure Rate (24 hours): 3mm 3mm 34.4 20.7 11.5 8.6 Hardness (Shore A): 45 5mm 12.4 6.9 5.2 Tensile Strength: 3 N/mm2 9mm 3.8 2.9 Volume Change: 3% 12mm 2.1 Elongation at Break: 650% Shelf Life: 12 months Estimated average figures only. Coverage will vary with materials, application Storage Conditions: Store Dry at 5ºC to 25ºC techniques & environmental conditions. Sealant coverage in metres. *Standard Conditions: 23ºC & 50% Relative Humidity KORAPUR 925 MARINE Elastic one-part paintable polyurethane sealant / adhesive Korapur 925 is a new improved formula with reduced shrinkage (-3% instead of -6%), and provides better creep resistance while offering higher UV resistance for marine industry sealing and adhesive applications. APPLICATIONS • Bonding: suitable for most marine substrates such as aluminium, stainless steel, plywood, glass, GRP, wood and for reducing vibration, (the use of a suitable Korabond primer is recommended to increase adhesion). • Sealing: Ideally suited for sealing joints above the waterline such as windows, portholes, hatches as well as bedding deck fittings. Description Polyurethane Sealant Polyurethane Sealant Colour White Black Size 310ml 310ml Box Qty 12 12 Rallithane 810 5ºC to 35ºC -40ºC to +90ºC 30 – 60 minutes* 3mm 40 – 45 – – – 9 months Store Dry at 5ºC to 25ºC Part No. 5-70124 5-70125 P/No. Single 5-70124/1 5-70125/1 FEATURES • Fast curing and over paintable • Elastic vibration-resistant joints and seals • Non-slumping, ideal for vertical and overhead applications • Good resistance to humidity, weathering and seawater • Meets International Maritime Organization (IMO) requirements • Non-corrosive, non-toxic and non-staining • Low odour • Available in either black or white 310ml cartridges KORABOND HG73 SEALANT PRIMER Primer for the pre-treatment of coated surfaces, glass, ceramics & stainless steel as a basis for subsequent bonding. 1Lt Part No. 5-70145 RALLITHANE 810 HIGH MODULAS One part polyurethane sealant / adhesive • • • • • Fast Cure • Single pack – easy application Permanent Flexibility • Conforms to ISO-11600-F-20 HM Resistant to Biodegradation • High resilience for heavily trafficked floors Can be painted Used as a bedding compound in marine applications Description Colour Size Box Qty Part No. P/No. Single Rallithane 810 Black 310ml 12 5-70131 5-70131/1 RALLIPRIME 160 / POROUS PRIMER HANDLING PRECAUTIONS For use with polyurethane sealants on absorbent surfaces All primers are highly flammable (flash point 24°C) and should, therefore, be used in well ventilated areas and away from naked flames. Primers should be stored away from direct sources of heat or sunlight. Part No. Description Size 5-70139 Ralliprime 160 Primer Tin 1 litre Recommended for use with Rallithane 810 on untreated & stained timber. Used to seal porous surfaces prior to application of polyurethanes. Surfaces should be free from dirt and grease. Should be brush applied. Drying time 60 minutes. For use on: Concrete, stone and hard woods* *degrease naturally oily woods e.g. Teak, Mahogany, Iroko with Acetone or ethyl acetate before using porous primer. This is a guide only and a small area should be tested. DELIVERY Please contact your nearest Aquafax depot for carriage details. SECTION 5 33 3M Sanding & Finishing Discs & Orbital Sanders SANDING & FINISHING 3M Hookit™ discs utilise the convenient hook-and-loop attachment system for easy placement on and removal from the tool face. 245 HOOKIT™ 7 Hole Disc Grit P40 P80 P120 Part No. 5-01691 5-01689 5-01687 Primarily used for rust removal and light dry sanding of metal surfaces. Diameter: 150mm • Aluminium oxide Hookit™ Pack Qty: 50 abrasive disc • Resin bond heavy weight paper • High performance heavy duty aluminium oxide paper disc is tough and durable • For machine use with 3M™ random orbital sanders 255P+ HOOKIT™ 15 Hole Disc Used to sand marine paints, gelcoats, epoxy and primers. • High performance aluminium oxide Hookit™ abrasive disc • 15 Hole configuration provides improved dust extraction • Achieves a better cut, less waste material loading and a reduction in airborne dust • Anti-loading benefits particularly with fine grades on difficult to sand top coats and primers TRIZACT FINE FINISHING DISC Grit P80 P120 P150 P180 P240 P320 P400 P500 Part No. 5-00443 5-00445 5-00446 5-00447 5-00449 5-00451 5-00453 5-00454 Diameter: 150mm Pack Qty: 110 Grit P3000 Part No. 5-00414 Diameter: 150mm High Performance Silicone Pack Qty: 15 Carbide abrasive discs with Hookit™ attachment. • Made with a pyramid structure which contains multiple layers of fine grade abrasive mineral particles. • Used with water for paint rectification to remove abrasive scratches followed by 3M™ compounds 316U RED HOOKIT™ 7 Hole Disc A re-attachable abrasive disc used for blend panel and paint preparation. • Standard dust-free abrasive disc with Hookit™ attachment • Aggressive shaping of plastic filler and removing paint around damaged area • Can be used with 3M™ random orbital sanders 260L HOOKIT™ MICROFINISHING 15 Hole Disc Designed for scuff sanding before painting, these discs can also be used to remove runs, dust nibs and orange peel from paint and gelcoat prior to compounding. Grit P80 P120 P150 P180 P240 P320 P400 P500 Part No. 5-01153 5-01169 5-01168 5-01167 5-01165 5-01163 5-01161 5-01160 Diameter: 150mm Pack Qty: 100 Grit P600 P800 P1000 P1200 P1500 Part No. 5-01057 5-01099 5-01055 5-01054 5-01053 Diameter: 150mm Pack Qty: 50 • Aluminium oxide abrasive offers a fast cut and long disc life • Durable film backing is tear-resistant and provides a consistent finish HOOKIT™ MULTI-HOLE BACK-UP PAD Suitable for all 3M™ 150mm dust extraction discs. • Made from high density foam • Consists of flat rigid centre and soft edge • Helps abrasive discs stay cleaner and last longer • 5⁄6 '' thread fixing Diameter: 150mm Pack Qty: Each Part No. 5-01122 3M ELECTRIC ORBITAL SANDER 3M ELITE AIR POWERED ORBITAL SANDER • Precision-balanced steel workings and powerful air driven motors run smoothly with less vibration, ideal for high production industrial environments • Improved durability, ergonomics and noise level maximize comfort and control for prolonged use • Pneumatic power exceeds the capability of standard electric sanders, supplying hours of continual use • Aluminium body and durable composite cover reduce cracked housings and downtime • Lever is recessed, so no pinch points • Wrist rest is extended and curved for more support • Includes dust collection port with improved angle on housing to allow easier access to air fitting • 3⁄16 '' diameter orbit Diameter: 150mm Part No. 5-08508 Part No.s in Red = Tor Order Only 34 SECTION 5 • Low-profile lightweight design and quiet operation enhance operator control and less vibration • Versatile tool can be used where air power is either unavailable or insufficient • Powerful motor provides professional performance for all sanding and finishing applications • Variable speed settings and convenient thumb control enable customized performance • Includes dust extraction port connection • 150 Watts (30V DC at 5 Amps) uses power much more efficiently than other electric sanders and doesn’t transfer that power into excess heat. • 3⁄16 '' diameter orbit • Kit includes: one electric sander, one power supply with AC lead, one 12ft (3.6m) sander lead • Sealed motor prevents contamination and extends tool life. Diameter: 150mm Part No. 5-08522 3M Abrasive Products & Scouring Pads SANDING & GENERAL MAINTENANCE 618 FRECUT DRY ABRASIVE SHEETS Frecut is a Silicon Carbide abrasive sheet used for hand sanding, often used as a dry alternative to Wetordry™ Size: 230 x 280mm Pack Qty: 50 Sheets Grit P80 P100 P120 P150 P240 P320 P400 734 WETORDRY™ ABRASIVE SHEETS Part No. 5-02631 5-02565 5-02564 5-02563 5-02560 5-02558 5-02556 Grit P60 P80 P100 P120 P150 P180 P240 P320 P400 P600 P800 P1000 Fast cutting waterproof Silicon Carbide abrasive sheets giving a high quality consistent surface finish. Size: 230 x 280mm Pack Qty: 25 Sheets SANDING SPONGE Fine grit silicone carbide, semi flexible sanding sponges suitable for sanding edges or contours of wooden surfaces. Part No. 5-01989 5-01988 5-01987 5-01986 5-01982 5-01981 5-01979 5-01977 5-01975 5-01973 5-01972 5-01971 SCOTCH-BRITE™ SYSTEM SCOURING PADS Part No. 5-03801 5-03801/1 Size: 100 x 68 x 26mm Pack Qty: 24 or singly Pack Qty (24) (single) Scotch-Brite™ cleaning system is suitable for every type of marine cleaning job. The pads fix to the unique Scotch-Brite™ Handle, even when wet and ensure an effective & fast cleaning action on hull, metal surfaces, decks etc. Soft Pad - Gelcoat & Paint 3M HOOKIT HAND BLOCKS Ideal for the efficient, low scratch cleaning of glass, aluminium, stainless steel, and any other sanitary surface. The flexibility of the pad offers benefits such as better conformability to the surface, and ease of rinsing after use. Hard Hard Type: Made of a sturdy, durable high strength material to fit the hand comfortably. Soft Type: Made of a tough flexible foam for block sanding flat and contoured areas. Part No. 5-05740 5-05742 Size 70 x 127mm 70 x 127mm Type Hard Soft Soft Qty 1 1 Heavy Duty - Below Waterline A super-thick heavy-duty pad that could be seen as the flexible sister of metal scrapers and steel wool. It does the same job but will conform to individual surfaces. Rinse-friendly. 3M HOOKIT HAND FILE BOARD A well balanced, durable shop tool, resistant to most solvents. It provides a non-twisting flat sanding surface. Hard Type Hard Part No. 5-05744 General Purpose General Boat Cleaning Can be used to clean a range of kitchen surfaces, in general purpose or medium duty scouring applications. The pad easily eliminates tough encrustations, and has non-rusting and resilient properties. Size: 70 x 395mm Pack Qty: Single SCOTCH-BRITE™ HANDPADS • Superior alternative to steel wool, wire brushes, sandpaper, and other nonwoven products for cleaning or finishing tasks • Very fine grade aluminium oxide abrasive cleans, finishes, grains, denibs, and defuzzes • Suitable for use on wood, metal, plastics, ceramics, porcelain, glass, rubber, or composites • Reusable pad resists tearing, splintering, shredding, loading and will never rust, providing a long, useful life • Perforated for quick and easy tearing, reducing waste Part No 5-07446 Colour Red Grit Grade Very Fine Size: 158 x 224mm Pack Qty: 20 Twist-Lok™ Pad Holder Specially designed for use with Scotch-Brite™ hand pads to make clean up jobs faster, easier, and safer. Distributes pressure evenly over pad surface for efficient cleaning action and improved pad life. Part No. 5-00035 5-00045 5-00055 5-00961 Description Colour Soft White Heavy Duty Blue General Purpose Green Pad Holder Grey Dimensions 158 x 95mm 158 x 95mm 158 x 95mm 118 x 81mm SECTION 5 Pack Qty 6 6 6 Each 35 3M Protection Equipment & Oil Sorbent PERSONAL PROTECTIVE EQUIPMENT 4515 BREATHABLE COVERALL (BLUE) • Protects skin from hazardous dusts and limited liquid splashes • Elasticated hood, ankles, cuffs and waist • 2-way zip with storm flap • Breathable fabric with low lint • Approved to CE Category III, Protection Type 5/6 (Particle Protection / Limited Splash) Size Medium Large XL XXL XXXL Part No. 5-04515 5-04516 5-04517 5-04518 5-04519 Sold Singly 5-09312 FFP1 PREMIUM DUST RESPIRATOR, VALVED FFP2 PARTICULATE FFA1P2 MAINTENANCE RESPIRATOR, FLAT FOLD FREE RESPIRATOR • Comfort, flat-fold, valved disposable respirator • Effective protection against low levels of fine mist and dust • Innovative 3 panel design fits a wide range of face shapes & sizes • Accommodates facial movements • Individually wrapped for hygienic storage prior to use • 3M cool flow valve for reduce heat and moisture build up • CE approved • Provides effective protection from lung damaging fine dusts. • Cooler to wear • Reduces exhalation effort • Stays comfortable for longer • Less likely to mist up eyewear • Moderate level fine dust/ oil water based mists (plastering, cement, sanding and wood dust) • Applications: Hand and machine sanding and grinding operations • CE approved • Protection against organic vapours and particulates • Unique design with integral filters • Flexible, soft, non-allergenic face piece • Exhalation valve for effective removal of heat and moisture • Applications: Mixing of paints, application of coatings, adhesives & sealers, degreasing • Meets EN405 2001 • CE approved Pack Qty: 10 Part No. 5-09312 Pack Qty: 10 Part No. 5-06923 Pack Qty: Each Part No. 5-06941 SECUREFIT™ CLEAR SAFETY SPECTACLES COMFORT SAFETY GOGGLES • Developed for demanding noisy environments • Particularly suited to low and medium frequencies • Combined liquid and foam sealing rings give comfort during long term use • Protection level 94 - 105dB(A) • Attenuation rating: 31dB • CE approved • Safety spectacles that self adjust to fit a wide array of head sizes • 3M™ Pressure Diffusion Temple Technology which helps diffuse pressure over the ear to enhance frame comfort for a secure and comfortable fit • Anti-Scratch & Anti-Fog coating for increased durability and improved vision • An integrated side-shield for added protection • Meets EN 166:2001, CE approved • Modern, slim design safety goggle, providing the wearer with an excellent field of vision • Sealed design helps provide protection against liquids, dust, gases and vapours • Acetate lens for excellent chemical resistance • Strong polycarbonate lense for impact resistance • Extremely scratch resistant coating • Meets EN 166:2001 Pack Qty: 1 Part No. 5-00520 Pack Qty: 1 Part No. 5-00201 Pack Qty: 1 Part No. 5-02890 H520 EAR MUFFS OIL SORBENT Petroleum Sorbents can be used to control spills of PAINTSHOP HANDWIPES • Removes most wet and dry paints, oils, sealants and adhesives • Contains skin conditioner and anti-bacterial agent • Double layered, textured material creates gentle scrubbing effect and excellent absorbency • Handy, easy to close container Qty: 100 per tub Part No. 5-00347 36 SECTION 5 hydrocarbons but will repel water. Used to keep work areas clean from dripping equipment around floors, workbenches & drums, or during engine repair work. HP-156 Sheets: T4 Mini Boom: Strong high capacity sorbent sheet Contains and absorbs spills around for picking up or wiping oil spillages. equipment to stop leaks spreading. Part No. 5-00156 5-00156/1 5-05660 Description HP156 Sheets HP156 Sheet T4 Mini Boom Dimensions 48 x 43cm 48 x 43cm 75mm OD x 1.2m Absorbs 1.42 litres 1.42 litres 3.75 litres Pack Qty 100 Sheets 1 Sheet Each 3M Dual Lock Fasteners, Masking & Specialist Tapes SPECIALIST & MASKING TAPES DUAL LOCK FASTENERS 2090 SCOTCH-BLUE MASKING TAPE Dual lock fasteners provide reclosable fastening for a wide range of applications. Weather Resistant Tape • UV & water resistant • Ideal for attaching marine electronics and securing cabinets and doors below deck • Has a closure life of 1,000 times Part No. 5-00356 Description Dual Lock Mini Width 25mm Roll Length 5m Pack Qty 2 Rolls WATERPROOF CLOTH TAPE Part No. 5-02090 5-02091 • A tough resilient waterproof tape with high strength adhesive coating. • Ideal for running repairs during long periods at sea or when racing. Part No. Description Tape Width 5-03998B Black Cloth Tape 50mm Roll Length 50m Pack Qty Each • General purpose high quality aluminium foil tape. • Bonds to a variety of different surfaces including woods, metals and plastics. • Thermally conductive for heating/cooling efficiency Part No. Description Tape Width Roll Length 5-01436 Aluminium Tape 50mm 50m 5-01436/1 Aluminium Tape 50mm 50m Pack Qty 16 Rolls 1 Roll 101E GENERAL MASKING TAPE 201E GENERAL MASKING TAPE 5-02211 5-02212 5-02213 5-02214 Pack Qty 24 Rolls 24 Rolls 3434 MASKING TAPE • High performance tape designed to meet the most demanding of paint masking situations. • Excellent solvent and water resistance • Suits both modern 2-pack and water based products • Blue colour enables easy identification Part No. 5-07897 5-07899 Description Masking Tape Masking Tape Tape Width 25mm 50mm Roll Length 50m 50m Pack Qty 36 Rolls 20 Rolls • Tape thinness provides excellent colour line separation • Performs well for long straight lines and smooth curves • Offers excellent moisture and solvent resistance • Backing allows taping over fresh paint sooner than paper tapes with less chance of damage • Features natural rubber adhesive for quick adhesion • Not for extended outdoor use Part No. 5-06521 5-06522 5-06523 • Ideal for non-critical applications. • Very good performance & holding power up to 80ºC. • Superior removal properties from various surfaces i.e. plastic, metal, wood etc. • Suitable for masking in cold environments No. of Rolls 48 36 24 20 Roll Length 55m 55m 218 FINE LINE TAPE Tape Roll Part No. No. of Part No. No. of Width Length Rolls Rolls 24mm 50m 5-00101 36 5-00101/6 6 36mm 50m 5-00102 24 5-00102/6 6 48mm 50m 5-00103 20 5-00103/5 5 Can be supplied singly by adding /1 to part no. i.e. 5-00101/1. Part No. Tape Width 25mm 50mm Can be supplied singly by adding /1 to part no. i.e. 5-07897/1. • General purpose masking tape • Reliable paint masking, ideal for general maintenance • Easy to write on for labelling • Use for temporary fixing, attaching or holding Roll Length 50m 50m 50m 50m Description 2090 Blue 2090 Blue Can be supplied singly by adding /1 to part no. i.e. 5-02090/1. 3M 1436 ALUMINIUM FOIL TAPE Tape Width 18mm 24mm 36mm 48mm • An easy-to-use masking tape for sharp paint lines and a professional-looking finish • Unwinds smoothly and sticks firmly • Removes easily and cleanly, even after 14 days • Suitable for use on painted walls, painted/finished trim and woodwork, glass and metal • UV resistant - ideal for window frames and areas exposed to direct sunlight Description Tape Width Fine Line Tape 6mm Fine Line Tape 12mm Fine Line Tape 19mm Roll Length 55m 55m 55m Pack Qty Roll Roll Roll Roll Length 55m Pack Qty Roll MASKING FILM Part No. 5-02211/12 5-02212/9 5-02213/6 5-02214/6 Can be supplied singly by adding /1 to part no. i.e. 5-02211/1. No. of Rolls 12 9 6 6 • Pre-folded, high-density, nonporous film for paint masking and paint overspray protection • Flake resistant for multiple coat use • May be used with lacquers Part No. 5-06848 Description Masking Film Tape Width 120cm SECTION 5 37 3M Compounds, Pads and Accessories COMPOUNDS & POLISHING MARINE IMPERIAL COMPOUND & FINISHING MATERIAL PERFECT-IT™ III FAST CUT COMPOUND • One step boat polish • Has a fast cut and leaves an excellent finish without swirl marks • Designed for use with air or electric buffing equipment using 3M compounding buff pads • Can be used to remove P600 and P800 dual action sand scratch marks from gel coat with a wool pad. • Easy to apply, easy to clean up • Fast acting, coarse grade compound for the rapid removal of fine sanding scratches • Has superior cut combined with a high-gloss ultrafine finish on both fresh and aged paintwork • Completely removes sand scratches without filling • Follow with 3M Marine Finesse-it II Finishing Material (5-09048) for a shiny and high-gloss finish 1kg Bottle - Part No. 5-09374 950ml Bottle Part No. 5-06044 MARINE HIGH GLOSS GELCOAT COMPOUND PERFECT-IT™ FAST CUT+ COMPOUND • Removes P800 dual action or P1000 wet sanding scratches from production gel coats • This compound contains no wax or silicone and leaves a high gloss finish without swirl wheel marks • For best results use with 5-05711 compounding pad on a slow speed polisher followed with 5-09048 Finesse-It™ Finishing Material • Fast-acting, high performance liquid abrasive removes sanding scratches from both refinished and new paintwork • Superior high gloss finish • Quick and easy to clean up • Easy to see when job is completed • Green bottle top to match recommended green compounding pad 1Litre Bottle - Part No. 5-00417 4.3kg Tin Part No. 5-06025 GRP COMPOUNDING PADS PAINT POLISHING PADS PERFECT-IT III GREEN COMPOUNDING PAD SUPERBUFF™ BUFFING PAD, WHITE • A white, double sided soft edged polishing pad • Produces excellent results on paint and gelcoat systems • Works with 3M compounds for fast consistent results • Stiffer centre hub for increased polishing power • Fits all standard (5⁄8 " shaft) slow speed polishers Superbuff Pad (Ø 200mm) Adaptor (5⁄8 " for M16) Part No. 5-05701 Part No. 5-05710 5-05701 5-05710 • Recommended for use with a machine polisher and 3M Perfect-It™ III Fast Cut+ Compound (5-00417) HOOKIT™ SBS™ COMPOUNDING PAD, WHITE • White wool pad for compounding and polishing • Easily attached to 3M Back Up Pads. • Produces an exceptional finish on paint and gel coat systems • Long lasting foam ensures that they can be used time and time again • Hook and loop backing provides easy attachment and removal as well as centering of polishing pad to backup 5-05711 • Fits all standard ( ⁄8 " shaft) slow speed polishers 38 Part No. 5-05711 Part No. 5-05717 SECTION 5 • 2 pads per pack Compounding Pads (Ø 150mm) Part No. 5-00487 5 Compounding Pad (Ø 225mm) Backup Pad (5⁄8 " ) • Delivers an aggressive cutting action that removes scratches and swirl marks from both refinished and new paintwork. 5-05717 Backup Pad (single) M14 Thread Part No. 5-09552 3M Finishing Products, Pads and Accessories FINISHING LIQUIDS, GLAZES & PADS MARINE FINESSE-IT™ II FINISHING MATERIAL PERFECT-IT™ III MACHINE POLISH • Designed for use on topside paint systems and gelcoat to remove swirl marks after compounding, while leaving a glazed finish. • Primarily designed for machine application but can also be used by hand on new or old paintwork • Apply by Dual Action polisher to save time and effort. • Produces a high-gloss deep-lustre durable finish • Recommended as the final finishing step after using 3M marine compounds or 5-06025 Marine High Gloss Gel Coat Compound 500ml Bottle Part No. 5-09048 1ltr bottle - Part No. 5-09376 PAINT FINISHING PADS GRP FINISHING PADS PERFECT-IT III YELLOW COMPOUNDING PAD SUPERBUFF™ POLISHING PAD, YELLOW • A yellow, double sided soft edged polishing pad, specially designed for use with polisher and glaze • Made of extremely fine fibres it produces a high gloss on paint and gelcoat surfaces, is long lasting, lightweight and well balanced • Fits all standard (5⁄8 " shaft) slow speed polishers Superbuff Pad (Ø 200mm) Adaptor (5⁄8 " for M16) Part No. 5-05705 Part No. 5-05710 5-05705 5-05710 • Recommended for use with a machine polisher and 3M Perfect-It™ III Fast Cut+ Compound (5-00417) HOOKIT™ SBS™ POLISHING PAD, YELLOW • White wool pad for compounding and polishing • Easily attached to 3M Back Up Pads. • Produces an exceptional finish on paint and gel coat systems • Long lasting foam ensures that they can be used time and time again • Hook and loop backing provides easy attachment and removal as well as centering of polishing pad to backup • 2 pads per pack 5-05713 • Fits all standard (5⁄8 " shaft) slow speed polishers Polishing Pad (Ø 225mm) Backup Pad (5⁄8 " Thread) • Designed to remove light scratches and swirl marks from both refinished and new paintwork. Part No. 5-05713 Part No. 5-05717 5-05717 Compounding Pads (Ø 150mm) Part No. 5-00488 Backup Pad (single) M14 Thread Part No. 5-09552 See pages 20 - 26 for our range of West System Products SECTION 5 39 3M Boat Care Products GELCOAT FINISHING SYSTEM NEW PERFECT-IT™ GELCOAT HEAVY CUTTING COMPOUND PERFECT-IT™ GELCOAT MEDIUM CUTTING COMPOUND & WAX PERFECT-IT™ GELCOAT LIGHT CUTTING POLISH & WAX • Fast-cutting compound removes heavy oxidation, scratches and other defects One Step One Step • Combines fast cutting power with a high gloss finish and durable wax protection • Provides a brilliant finish and durable protection • Use for any P1000 and finer scratches • For light or dark coloured gelocat • Improved formula has longer wet times for easier clean up and less dust, even in warm climates • Improved formula has longer wet times for easier clean up and less dust, and more efficient use even in warm climates • Use for any P800 and finer scratches • Improved formula has longer wet times for easier clean up and less dust • Plus, now works better in warm climates and allows you to use less material 946ml Bottle Part No. 5-09360 473ml Bottle 946ml Bottle • Use for any P1500 and finer scratches 473ml Bottle 946ml Bottle Part No. 5-09361 Part No. 5-09362 Part No. 5-09363 Part No. 5-09364 Use the above with 3M GRP Compounding Pads 5-05701 & 5-50711 (page 38) PERFECT-IT™ BOAT WAX PERFECT-IT™ BOAT WASH • Pure wax finish offers long lasting protection against the elements • Cleans grime, algae, dirt and other common marine contaminants from stern to stern • Safe for gelcoat, paint, fibreglass and metals • A professional concentrate; only 75ml per 10 litres of water needed 473ml Bottle 946ml Bottle Part No. 5-09365 Part No. 5-09366 • High suds formula is gentle enough to clean without stripping wax 473ml Bottle 946ml Bottle Part No. 5-09367 Part No. 5-09368 RECONDITIONING, CLEANING & MAINTENANCE MARINE CLEAR PLASTIC RESTORER MARINE OUTDOOR VINYL CLEANER, CONDITIONER & PROTECTOR • Safely removes fine scratches, haziness and restores most marine plastics • Designed to clean, condition and protect marine vinyl and rubber components. • Restores clarity to windshields and hatches • Can be used on most tinted plastics or used with a machine on polycarbonate plastics such as Lexan or Tuffak 250ml Bottle Part No. 5-09044 • This unique gel formula provides durable protection in exterior and interior applications. • The gel formula gives you better application control compared to a liquid form 250ml Bottle Part No. 5-09023 See page 53 for Camco Multi-purpose Cleaning Attachments & Handles 40 SECTION 5 3M Boat Care, Sealants & Adhesives RECONDITIONING, CLEANING & MAINTENANCE MARINE ULTRA PERFORMANCE PASTE WAX MARINE METAL RESTORER & POLISH PASTE • Contains 3M polymer technology providing a durable acrylic with soil release & water beading properties of a fluoropolymer & silicone • Cleans and restores marine metal components in one step • Ultra Performance Wax leaves a protective high gloss finish on marine gelcoat, topside paints, painted aluminium and metal parts • The easy application formulation saves time leaving your boat with a long lasting protection against UV light damage • Suitable for use on stainless steel, brass, bronze, copper, chrome, aluminium and other marine metals • Apply by hand to remove surface rust, oxidisation, corrosion and tarnish restoring a shine and lustre. 500ml container Part No. 5-09019 CITRUS BASED CLEANER SPRAY • Cleaner / de-greaser used to remove dirt, grease, tar, liquid adhesive, adhesive tape residue, inks, oil and scuff marks. • Non-corrosive, this cleaner has a fresh citrus scent • Quick and easy application 200ml aerosol spray 500ml aerosol spray Part No: 5-01020 Part No: 5-01021 269g container Part No. 5-09030 ADHESIVES & SEALANTS 3M FB10 FASBOND CONTACT ADHESIVE 1L • Bonds immediately and permanently upon application eliminating the need for clamping A brushable, air drying, neutral coloured contact adhesive for bonding decorative laminates, aluminium, steel, wallboard, plywood, panels, wood and wood veneer, rubber, canvas and other porous and non-porous materials to each other or to themselves. • Offers exceptional high-bond strength and superior resistance to heat and sunlight Bulk Pack: 6 x 1Ltr Can: Part No. 5-02010 Single 1Litre Can: Part No. 5-02010/1 3M 4200 FC ONE-PART ADHESIVE SEALANT REMOVEABLE • A one-part general all-purpose polyurethane that chemically reacts with moisture to delivery flexible bonds with good adhesion to wood, fibreglass, gelcoat, plastics and metals • Paintable and sandable • Forms watertight, weather-resistant seals on joints and boat hardware above or below the waterline Colour White Black Box Qty 12 12 Part No. 5-06560 5-06564 Part No. Single 5-06560/1 5-06564/1 Colour White Box Qty 12 Part No. 5-06520 Part No. Single 5-06520/1 Specifications: Size: 310ml Curing Time: 24 hours Note: Not recommended for sealing wood decks because it may Tack Free: 2 hours Box Qty: 12 cartridges be permanently softened by certain teak cleaners or sealers. 3M 5200 FC MARINE ADHESIVE SEALANT UNREMOVEABLE • This fast-curing high-performance polyurethane becomes tack free in one hour and fully cures in approximately 24 hours. • The seal is extremely strong, retains it’s strength above or below the waterline. It stays flexible too - allowing for structural movement. Stress caused by shock, vibration, swelling or shrinking is effectively absorbed • Has excellent resistance to weathering and salt water Specifications: Size: 295ml Curing Time: 24 hours Tack Free: 1 hour Box Qty: 12 cartridges SECTION 5 41 Plastic Padding Bodyfillers & Epoxy BODYFILLERS & EPOXY PLASTIC PADDING CHEMICAL METAL PLASTIC PADDING GELCOAT FILLER & HARDENER Two-part, polyester based general purpose product for fast and easy repairs. Suitable for filling and trowelling flaws and cracks, for joining dissimilar materials and for sealing housings and casings. White Gelcoat filler for surface repairs. Restores original surface finish to boat hulls and other GRP panels. • Easy to mix, apply, shape and sand • Can be pigmented or painted with any marine paint • Use with glass fibre mat for structural repairs to GRP Description Qty Part No. Gelcoat Filler Junior 165g 12 5-21110 Gelcoat Filler Junior 165g each 5-21110/1 • Repairs, strengthens, joins or fills virtually any material • Resistant to water, salt water, oil, fuel, and to most weak acids and chemicals • High strength product • Allows machining, including tapping threads after 20 minutes • Resistant to temperatures up to +160°C Description Mini (tube) 85g Mini (tube) 85g Junior (tube) 130ml Junior (tube) 130ml Giant (tin) 560ml Giant (tin) 560ml Qty 18 each 12 each 6 each PLASTIC PADDING MARINE FILLER Special polyester filler for all marine applications. Ideal for superstructure repairs. • Super smooth finish on wood, metal, glass fibre and aluminium • Can be painted with all marine finishes Part No. 5-21100 5-21100/1 5-21101 5-21101/1 5-21102 5-21102/1 PLASTIC PADDING LEAK FIX Seals and repairs leaks in petrol tanks, radiators and sumps. • Sets in minutes • Resistant to petrol, diesel, oil, salt water, high temperatures and most common chemicals Description Mini (tube) 85g Mini (tube) 85g Qty 18 each Part No. 5-21104 5-21104/1 PLASTIC PADDING MARINE EPOXY Qty 6 each Part No. 5-21116 5-21116/1 Qty 12 each Part No. 5-21118 5-21118/1 A metal-filled two-component adhesive • Sets like steel • Seals, repairs, bonds, fixes and replaces • Ideal for emergency repairs • Hardens in 5 minutes • Bridges and fills in one go • Tack-free finish allows easy removal of excess product 42 Part No. 5-21113 5-21113/1 5-21114 5-21114/1 Two part epoxy filler. Specially for below the waterline repairs on metal, wood and glass fibre. • Effectively seals osmosis blisters • Fast setting and easy to sand to a tough durable finish • Can be used with Plastic Padding Gelcoat for a smooth finish Description Super Steel Epoxy Weld 50g Super Steel Epoxy Weld 50g Qty 12 each 6 each Qty 12 each 6 each PLASTIC PADDING SUPER STEEL EPOXY WELD Contains high tensile glass fibre strands for extra strength. 165g 165g 765g 765g 150g 150g 840g 840g Description Marine Epoxy 2 pack 270g Marine Epoxy 2 pack 270g PLASTIC PADDING MARINE GLASS FIBRE FILLER Description Glass Fibre Filler Glass Fibre Filler Glass Fibre Paste Tin Glass Fibre Paste Tin Description Marine Filler Junior (tube) Marine Filler Junior (tube) Marine Filler Giant (tin) Marine Filler Giant (tin) Part No. 5-21106 5-21106/1 5-21107 5-21107/1 SECTION 5 PLASTIC PADDING PLASTIC SPREADER Flexible polypropylene reuseable spreaders for a professional finish. Description Qty Part No. Plastic Spreader 100 (10 x 10) 5-21122 Plastic Spreader 10 pack 5-21122/10 Loctite Threadlockers & Flange Sealants SEALANTS & ADHESIVES LOCTITE 243 LOCK ‘N SEAL 24ml LOCTITE 270 STUD ‘N BEARING FIT 24ml Loctite 243 medium strength threadlocker, suitable for all metal threaded assemblies. Breakaway torque 26Nm. • Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces) • Proven to tolerate slight contaminations of industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids • Prevents loosening on vibrating parts, e.g. pumps, gear boxes or presses • Permits disassembly with hand tools for servicing • P1 NSF Reg. No.: 123000 Loctite 270 High Strength, general purpose threadlocker. Breakaway torque 33Nm. • Suitable for all metal fasteners, including stainless steel, aluminium, plated surfaces and chrome-free coatings • Tolerates slight contaminations of industrial oils, e.g. engine oils, corrosion prevention oils, cutting fluids • Ideal for permanently locking studs on engine blocks and pump housings • To be used if regular removal for maintenance is not required • P1 NSF Reg. No.: 123006 Part No. 5-21141 (Qty 12) Part No. 5-21141/1 (Single) Part No. 5-21142 (Qty 12) Part No. 5-21142/1 (Single) Specification Maximum thread size: Strength: Breakaway torque: Fixture time steel: Fixture time brass: Fixture time stainless steel: Service temperature range: M36 Medium M10 bolts: 26 Nm 10 min. 5 min. 10 min. -55 °C to +180 °C Specification Maximum thread size: Strength: Breakaway torque: Fixture time steel: Fixture time brass: Fixture time stainless steel: Service temperature range: Up to M20 High M10 bolts: 33 Nm 10 min. 10 min. 150 min. -55 °C to +180 °C LOCTITE 55 PIPE SEALING CORD 50m Pot LOCTITE 2701 THREADLOCKER 50ml Loctite 2701 High strength threadlocker, especially for chromated surfaces Part No. 5-21144 (Single) Specification Maximum thread size: Strength: Breakaway torque: Fixture time steel: Fixture time brass: Fixture time stainless steel: Service temperature range: Up to M20 High M10 bolts: 38 Nm 10 min. 4 min. 25 min. -55 °C to +150 °C Loctite 55 pipe & threadsealing cord. • General purpose, threaded pipe and fitting sealant • Non curing, immediate, full pressure seal • For a quick, easy and reliable seal • WRC listed, meets BS 6920 for potable water: 0808533 • DVGW/KTW approval for gas and potable water • Tested in accordance with EN 751-2 Class ARp and DIN 30660 • Certified to NSF/ANSI, Standard 61 Part No. 5-21155 (Qty 24) Part No. 5-21155/1 (Single) Specification Maximum pipe size: Disassembly strength: Service temperature range: Breakaway torque: 4" Low -55°C - +149°C n.a. LOCTITE SI 5980 QUICK GASKET LOCTITE SI 5990 QUICK GASKET 40ml General Purpose Flange Sealant 40ml High Temperature Flange Sealant Premium high performance silicone black for flanges exposed to permanent oil contact. • Excellent oil resistance • For all kind of flanges including metals and plastics as well as combinations of both • Can replace pre-cut paper or cork gaskets • High flexible gasket maker • Non-corrosive • Health & Safety friendly Premium high performance silicone copper for flanges exposed to high temperatures (up to 300ºC). • Excellent temperature resistance • For all kind of flanges including metals and plastics as well as combinations of both • Can replace pre-cut paper or cork gaskets • Non corrosive • Health & Safety friendly Part No. 5-21162 (Qty 12) Part No. 5-21162/1 (Single) Part No. 5-21160 (Qty 12) Part No. 5-21160/1 (Single) Specification Colour: Tack free time: Tensile strength: Service temperature range: Black 30 min. 1.6 N/mm² -55°C to 250°C Specification Colour: Tack free time: Tensile strength: Service temperature range: Copper 40 min. 1.9 N/mm² -60°C to 350°C SECTION 5 43 Loctite, Captain Tolley & Burgess Marine Products SEALANTS & ADHESIVES LOCTITE SI 5926 INSTANT GASKET LOCTITE 574 MULTI GASKET 40ml Multi purpose flexible silicone sealant. 50ml general purpose sealant for machined, rigid metal flanges. For flexible flanges, machined or casted surfaces. Can be used on metal, plastic and painted parts. Resists vibration, thermal expansion and contraction Part No. 5-21168 (Single) Part No. 5-21166 (Qty 12) Part No. 5-21166/1 (Single) Specification Colour: Service temperature range: Max. gap: Skin over time: Cure through volume in 24 h: Strength: Cure method: Ideal for use on rigid metal parts, e.g. cast iron components and pump housings Blue -60°C - +200°C 1mm 60 min. 2.5 mm Low Moisture (Silicone) Specification Colour: Service temperature range: Tensile shear strength: Max. gap: Fixture time steel: Fixture time aluminium: Strength: Cure method: Orange -50°C - +150°C 8.5N/mm² 0.25mm 15 min. 45 min. Medium Anaerobic LOCTITE 3463 MAGIC METAL STEEL STICK 114g Metal-filled Compounds, 2K Epoxy. Comes in a steel filled kneadable stick, sets in 10 minutes and can be drilled, filed and painted. Adheres to damp surfaces and cures under water, also chemical and corrosion resistant. • Emergency sealing of leaks in pipes and tanks • Smoothes welds • Repairs small cracks in castings Part No. 5-21170 (Single) Specification Working life: Fixture time: Shear strength (GBMS): Compressive strength: Service temperature range: 3 min. 10 min. >6 N/mm² 82.7 N/mm² -30 °C to +120 °C CAPTAIN TOLLEY'S CREEPING CRACK CURE • One part water based acrylic co-polymer penetrating sealant • Seals hairline cracks by capillary action 24 hour curing time providing a clear, flexible and paintable seal • Can be used on wood, glass, rubber, metals, perspex, ceramic, fibreglass, polystyrene and some plastics • For use around the home, boat, caravan, motorhome or car Size 60ml 60ml 250ml 250ml Qty 12 Each 12 Each Part No. 5-70100 5-70100/1 5-70101 5-70101/1 BURGESS MARINE WOOD CARE 44 BURGESS MARINE WOODEN BURGESS MARINE DECK CLEANER WOODSEALER BURGESS MARINE TOP GLOSS A water based biodegradable environmentally friendly, powerful sequestriant. It lifts grey weather stains, grime, grease, moss and dirt. Suitable for all woodwork including decks and gangways. The ideal treatment prior to applying Burgess Woodsealer or standard teak oil. 1 Litre Part No. 5-27001 Formulated from similar, but harder, resins to those used in Woodsealer. This gives a crystal clear gloss finish if applied over the matt finish of Woodsealer. It is ultra violet stable but does not have UV blockers and so for exteriors should be used over the top of Marine Woodsealer. 1 Litre Part No. 5-27021 Ideal for use on all exterior wooden and plywood surfaces on a variety of vessels including Smacks, Bawleys and Clinker yachts. Also suitable for decking, strakes and capping rails etc. It contains UV blocking pigments which helps to prevent degradation of wood by the sun's rays. Will not crack or craze like varnish. Can be used either as a complete treatment leaving a matt finish or as a primer to be over coated with Top Gloss or Clearsealer. 500ml Part No. 5-27010 1 Litre Part No. 5-27011 SECTION 5 Harris / T-Class Brushes & Rollers BRUSHES & ROLLERS HARRIS NO-LOSS® BRUSHES HARRIS PREMIER BRUSHES NoLoss® has been improved with a blend of specially shaped synthetic filaments to ensure better paint pick up and an even smoother finish, the filaments are deeply set into the ferrule to guarantee no bristle loss for the lifetime of the brush. The Premier brush combines hard and soft handle materials with a blend of natural and synthetic filament to provide a brush that's a pleasure to use and gives a great finish every time. HARRIS CLASSIC BRUSHES HARRIS T-CLASS DELTA TRADE The Classic brushes are made of quality pure bristle with a traditional hardwood handle. Particularly good with oil-based paints and varnishes. Natural bristle and advanced synthetic filaments, excellent absorption and controlled paint layoff. Stainless steel ferrule to prolong the life of the brush wooden handle (black plastic handle on 4''). Brush Size 1'' (25mm) 11⁄2 '' (38mm) 2'' (50mm) 3'' (76mm) 4'' (101mm) No Loss 5-17225 5-17240 5-17250 5-17275 5-17300 Premier 5-17325 5-17340 5-17350 5-17375 5-17400 Classic 5-17425 5-17440 5-17450 5-17475 – Pack of 3 Brushes 1'', 11⁄2 '' and 2'' Part No. 5-17610 4'' ROLLERS TRAY, FRAME AND SET 5-17706 HARRIS / T-CLASS 4'' MINI ROLLERS There are 2 types available: High density foam roller sleeves for use with solvent based paints on smooth surfaces. Ideal for glass paint. Simulated mohair sleeves for use with solvent based undercoats and primers on smooth surfaces. Ideal for use with stains, varnishes and wood treatment. BUDGET PACK 5-17702 5-17700 5-17705 Delta 5-17625 5-17640 5-17650 5-17675 5-17690 Material Foam Mohair 10 Pack 5-17700 5-17702 2 Pack 5-17705 5-17706 Mini roller set contains: 4" mini roller frame, plastic tray and five high density foam sleeves. Description 4'' Mini Roller Frame only 4'' Mini Roller Paint Tray Only 4'' Mini Roller Set Part No. 5-17708 5-17709 5-17720 For International Paint Thinners, see page 11 SECTION 5 45 Harris Tools & Sanding Budget Paint Equipment ROLLERS, SCRAPERS & SANDING HARRIS TASKMASTERS® 7'' ROLLERS, TRAY, FRAME AND SET Taskmasters® knitted sleeves are manufactured in the UK and offer faster coverage due to their greater paint holding capability. The sheepskin sleeve holds even more paint for faster coverage on extra rough surfaces. High density foam roller sleeves are ideal for oil based paints on very smooth surfaces. 5-17710 5-17711 5-17721 7'' Rollers 7'' Roller Accessories & Set Description Foam Gloss Sheepskin Medium Pile Sheepskin Short Pile Part No. 5-17711 5-17721 5-17722 Description 7'' Roller Frame only Paint Tray for 7'' Roller 7'' Medium Pile Roller Kit Part No. 5-17710 5-17712 5-17723 5-17722 5-17712 HARRIS PAINT SCRAPERS Taskmasters Retractable Paint Scraper Super sharp blade for removing paint and adhesives from glass surfaces. Paint Stripping Knife with a hardened and tempered brushed steel finish. 5-17730 Paint Stirrer For quick & effective paint mixing. 5-17717 Description Retractable Paint Scraper Replacement blades for 5-17717 Paint Stirrer 3'' Paint Scraper/Stripping Knife 5-17719 HARRIS ALUMINIUM OXIDE PAPER HARRIS WET & DRY PAPER Premium quality abrasive for general sanding. Lasts longer than conventional glasspaper and resists clogging. Premium quality waterproof abrasive for metalwork finishing and decorating. Resists clogging when used with water. Description Fine (120 grit) Aluminium Oxide Paper (4 pack) Medium (80 grit) Aluminium Oxide Paper (4 pack) Coarse (60 grit) Aluminium Oxide Paper (4 pack) Assorted Aluminium Oxide Paper 4 pack (1 fine, 2 medium, 1 coarse) Assorted Wet & Dry Paper 4 pack (1 fine, 2 medium, 1 coarse) Aluminium Oxide 7 Pack Assorted with block 5-17723 Part No. 5-17750 5-17751 5-17752 5-17753 5-17754 5-17755 BUDGET BRUSHES & PAINTING ACCESSORIES 5-50028 46 5-50003 5-50005 5-50010 5-50012 Part No. 5-50003 5-50005 5-50010 5-50012 5-50016 Description 1'' Budget Paint Brush 2'' Budget Paint Brush Budget Paint Brush Set (5 assorted) 4'' Mini Simulated Sheepskin Roller Set 7'' Mopile Budget Roller Set (roller, roller frame & tray) SECTION 5 5-50023 5-50024 5-50016 Part No. 5-50023 5-50024 5-50027 5-50028 5-50027 Description Disposable White Overalls, Large Disposable White Overalls, X-Large Safety Goggles Dust Mask (non approved ) per 10 See pages 34 - 35 for more sandpaper and abrasive products. Part No. 5-17717 5-17718 5-17719 5-17730 Wiping Materials RAGS & WIPES PERFORM® WORKS Designed to meet the needs of the most demanding working environments, Tufwipe® is a high performance, multiple-use wiper and is extremely strong and durable, reducing costs and waste. It is heat and solvent resistant and virtually lint-free. Recognised as a leading brand in its class, Tufwipe® is available in folded and rolled formats for convenient use. Works Wiping Roll makes fast work of light spills and is ideal for everyday use. This single use wiper come in a large 400m roll in white only. Colour Blue White Part No. 5-51001 5-51003 Boxed Tufwipe® Sheet Size (W x L): 22 x 43cm Case Configuration: 160 wipes per pack, 2 packs per case Pack Format & Ply: Folded (1 Ply) Colour Blue White Part No. 5-51002 5-51004 Tufwipe® Rolls Sheet Size (W x L): 26 x 40cm Case Configuration: 158m (400 wipes) roll, 2 rolls per outer Pack Format & Ply: Roll (1 Ply) Colour White Part No. 5-51005 Works Roll Sheet Size (W x L): 26 x 39cm Case Configuration: 400m (1013 wipes) roll, 2 rolls per outer Pack Format & Ply: Roll (2 Ply) OPTIMUM PROWIPERS RESOURCERAG ESSENTIALS 2 PLY CENTREFEED ResourceRag is chemical free, strong when wet or dry and absorbs up to six times it’s own weight. Made from 100% recycled material and Eco label accredited, this 2 ply roll can cope with increased absorbancy required for larger spills. Supplied as case of 6 rolls. Colour White Part No. 5-51000 ResourceRag Sheet Size (W x L): 46 x 38cm Case Configuration: 100 sheets per box Pack Format: Box NEW RANGE PERFORM® TUFWIPE® Essentials Centrefeed Sheet Size (W x L): 175 x 150m Case Configuration: 372 wipes per roll, 2 rolls per case Pack Format & Ply: Roll (2 Ply) Colour Blue Part No. 5-51006 For 3M Personal Protective Equipment see Page 36 SECTION 5 47 Polymarine Hypalon & PVC Fabrics & Adhesives INFLATABLE BOAT & RIB CARE HYPALON FABRIC PVC FABRIC Hypalon inflatable boat material for repairing damaged tubes & floors. Hypalon is a synthetic rubber material patented by DuPont. Hypalon has many applications in many industries and it has proven itself as a material with excellent air holding capabilities and oil resistance. Hypalon coated onto polyester or nylon fabric with an interior coating of neoprene is a very reliable and durable inflatable boat fabric and can last for more than a decade even in the harshest environments. PVC inflatable boat material for repairing damaged tubes & floors. PVC is a vinyl polymer chemically known as polyvinyl chloride. In the inflatable boat industry it is used as a coating on polyester or nylon to increase the strength and tear resistance. Because it is a type of plastic, it can be thermobonded or glued. This allows the manufacturer to mass produce boats on a large scale with machines and unskilled labour. Half roll (70cm x 15cm) Half roll (70cm x 15cm) Colour Black Blue Grey Light Grey Orange Red White Yellow Part No. 5-81040 5-81041 5-81042 5-81043 5-81044 5-81045 5-81046 5-81047 Colour Black Blue Grey Light Grey Orange Red White Yellow Part No. 5-81050 5-81051 5-81052 5-81053 5-81054 5-81055 5-81056 5-81057 Colour Black Blue Grey Orange Red White Part No. 5-81060 5-81061 5-81062 5-81064 5-81065 5-81066 Full roll (145cm x 15cm) Colour Black Blue Grey Orange Red White Part No. 5-81070 5-81071 5-81072 5-81074 5-81075 5-81076 For advice on selecting the correct fabric go to: www.polymarine.com 2990 HYPALON ADHESIVE Inflatable Boat Adhesive. 3026 PVC ADHESIVE Inflatable Boat Adhesive. Solvent based polychloroprene rubber glue giving high strength bonds, particularly suitable for emergency repair of inflatable boats, RIBs and Dinghies. Will bond natural rubber, polychloroprene, butyl, nitrile , hypalon and polyurethane rubber materials, leather. Solvent based polyurethane adhesive giving excellent adhesion to both plasticised and unplasticised PVC nylon fabric, polyurethane fabric and foam. Use for repair of all PVC inflatables including Zodiac/Bombard "Dynalon" and "Strongon" fabrics and Narwhal/Valiant "Hypertex". PLEASE NOTE :- For a complete bond 2903 solvent (Part No. 5-81125 or 5-81126), must be used before the adhesive is applied. Hypalon 1 Part Adhesive • Excellent resistance to heat, salt water and humidity • Easy to use as a single part glue for quick and temporary repairs • Cleaner - P510 Hypalon Solvent (Part No. 5-81120 or 5-81121) 70ml - Part No. 5-81101 5-81101 5-81103 5-81104 48 Full roll (145cm x 15cm) PVC 1 Part Adhesive • Easy to use as a single part glue for quick and temporary repairs • Contact bonds in 10-15 minutes, full cure 48 hours 70ml - Part No. 5-81111 Hypalon 2 Part Adhesive As above, plus: • Easy to mix two part system supplied in sets with requisite amount of curing agent; can be used as a single part for quick temporary repairs • Contact bonds in 10-15 minutes, full cure 48 hours • Coverage - using 2 coats, 1 litre bonds 1 square metre • Easy to apply by brush or roller PVC 2 Part Adhesive • Easy to mix two part system supplied in sets with requisite amount of curing agent; can be used as a single part for quick temporary repairs • Contact bonds in 10-15 minutes, full cure 48 hours • Coverage - using 2 coats, 1 litre bonds 1 square metre • Easy to apply by brush, roller or serrated trowel 250ml Tin & Curing Agent Part No. 5-81103 250ml Tin & Curing Agent Part No. 5-81113 1 Litre Tin & Curing Agent Part No. 5-81104 1 Litre Tin & Curing Agent Part No. 5-81114 SECTION 5 ! DO NOT USE HYPALON PRODUCTS ON ANY PVC COATED FABRIC SURFACE. Polymarine Hypalon & PVC Maintenance Products INFLATABLE BOAT & RIB CARE HYPALON EMERGENCY BOAT REPAIR KIT PVC EMERGENCY BOAT REPAIR KIT Contains: 70ml tube of Hypalon adhesive, 35 x 15cm of Hypalon material, abrasive paper and instructions. Please Note:- For a permanent repair, Polymarine 2 part adhesive must be used. Colour Black Blue Grey Light Grey Orange Red White Yellow Part No. 5-81000 5-81001 5-81002 5-81003 5-81004 5-81005 5-81006 5-81007 Contains: 70ml tube of PVC adhesive, 35 x 15cm of PVC material and instructions. Colour Black Grey Orange Red White Part No. 5-81020 5-81022 5-81024 5-81025 5-81026 Please Note:- For a permanent repair, Polymarine 2 part adhesive must be used. P510 HYPALON SOLVENT PRIMER 2903 PVC SOLVENT PRIMER & CLEANER • For degreasing hypalon surfaces before adhering and cleaning brushes. • Suitable for reactivating applied adhesive 500ml Part No. 5-81120 1 Litre Part No. 5-81121 • A primer to degrease and prepare PVC surfaces before adhering • Suitable for reactivating applied adhesive and cleaning brushes 500ml Part No. 5-81125 1 Litre Part No. 5-81126 FLEXITHANE HYPALON PAINT SUPERFLEX PVC PAINT A fully flexible paint formulated for Hypalon PU and rubber variant fabric • Smooth satin finish, will not crack or flake off • No mixing required, apply with a brush or gloss roller, touch dry in 30 minutes. Can be sprayed • Two coats for best results • Used for resealing and preventing rubbing strake and mouldings from powdering Colour • Coverage 3 sq m per 500ml Black WARNING - Flexithane must not Blue be used on any PVC coated Grey fabric surface. Orange Red For paint colours see page 50 White A fully flexible paint formulated for renovating PVC and any other PVC variant fabric • Smooth satin finish, will not crack or flake off • No mixing required, apply with a brush or gloss roller, touch dry in one hour • Seawater and sunlight resistant • Many uses including hatch covers, PVC fenders, boatcovers, dodgers etc. Colour • Coverage 2.5 sq m per 500ml Black Blue Grey Orange Red White Yellow Midnight Blue Size 500ml 500ml 500ml 500ml 500ml 500ml Part No. 5-81210 5-81211 5-81212 5-81214 5-81215 5-81216 LIQUID LETTERS HYPALON LETTERING PAINT A fully flexible paint formulated for Hypalon PU and rubber variant fabric • Smooth satin finish, will not crack or flake off • No mixing required, apply with a brush or gloss roller, touch dry in 30 minutes. Can be sprayed • Two coats for best results • Used for resealing and preventing rubbing strake and mouldings from powdering Colour WARNING - Must not be used on Black any PVC coated fabric surface. Blue Grey For paint colours see page 50 Orange Red White ! Size 500ml 500ml 500ml 500ml 500ml 500ml 500ml 500ml Part No. 5-81230 5-81231 5-81232 5-81234 5-81235 5-81236 5-81237 5-81238 For paint colours see page 50 LETTERFLEX PVC LETTERING PAINT Size 125ml 125ml 125ml 125ml 125ml 125ml Part No. 5-81200 5-81201 5-81202 5-81204 5-81205 5-81206 DO NOT USE HYPALON PRODUCTS ON ANY PVC COATED FABRIC SURFACE. Tin A fully flexible paint formulated for Colour renovating PVC and any other PVC variant fabric Black Blue • Smooth satin finish, will not crack or Orange flake off • No mixing required, apply with brush Red White or gloss roller, touch dry in 1 hour Yellow • Seawater and sunlight resistant Aerosol • Many uses including hatch covers, Colour PVC fenders, boatcovers, Orange dodgers etc. Red • Can be used with our cut stencils White SECTION 5 Size 125ml 125ml 125ml 125ml 125ml 125ml Part No. 5-81220 5-81221 5-81224 5-81225 5-81226 5-81227 Size 150ml 150ml 150ml Part No. 5-81244 5-81245 5-81246 49 Polymarine Hypalon & PVC Maintenance Products INFLATABLE BOAT & RIB CARE SP54 HYPALON ANTIFOUL SP54 PVC ANTIFOUL Fully flexible antifoul for use on Hypalon material. Can also be used on non-flexible surfaces such as GRP. • Hull and tubes can be protected on your RiB with just one product. • Developed using unique pseudo-organic technology • Extensively tested - keeps virtually Colour Black all hulls free from growth of algae, Blue crustaceans and othe unwelcome Grey marine life Orange • Includes copper White A fully flexible antifoul for use on PVC material. Can also be used on non-flexible surfaces such as GRP. • Hull and tubes can be protected on your RiB with just one product. • Developed using unique pseudo-organic technology • Extensively tested - keeps virtually Colour all hulls free from growth of algae, Black crustaceans and othe unwelcome Grey marine life Red • Includes copper White Polymarine Paint Colours Black Blue Part No. 5-81270 5-81271 5-81272 5-81274 5-81276 Size 1 Litre 1 Litre 1 Litre 1 Litre Part No. 5-81280 5-81282 5-81285 5-81286 The printing processes used in producing the colour charts do not allow exact colour reproduction and we recommend that you should check for accuracy before applying. Grey Orange Red SURE SEAL EXTRA AQUA STOP Flexible Repair Sealant & Adhesive Waterproof permanent repair to coated fabrics, PVC, PU, neoprene, rubber, leather, most plastics and fabrics Vinyl, Fibreglass, Glass, Wood, Metal, etc 35ml Part No. 5-81307 Protect your electrical equipment from water/moisture ingress • Formulated to protect all low voltage equipment eg. VHF radios, GPS, etc. • One application provides permanent protection DISPEL STAIN & RUST REMOVER Removes rust stains, organic stains, algae stains from fibre glass. • Easy to use, non abrasive gel • For those difficult to remove yellow and rust stains on GRP 500ml Part No. 5-81300 INFLATABLE BOAT CLEANER 200ml Aerosol Part No. 5-81302 INFLATABLE BOAT FINISH An easy to use cleaner specifically formulated for use on inflatable boats • Suitable for both PVC and Hypalon fabrics • Removes dirt, white oxidation, grease, oil and petrol deposits • Biodegradable 500ml Part No. 5-81310 INFLATABLE BOAT & DINGHY CLEANING VALET KIT Junior Size A finishing product specifically for use on inflatable boats • Suitable for both PVC & Hypalon fabrics • Easy to apply with a soft cloth, no polishing required, dries to a pleasant sheen • Helps to prevent resoiling • Contains no silicones or distillates 250ml Part No. 5-81314 White Yellow Midnight Blue SEALFLEX SEALANT Flexible waterbased acrylic latex sealant used internally for sealing porosity and minor leaks in Hypalon & PVC inflatables • Sealflex is introduced into the inflatable through the valve, which is then inflated and tumbled to circulate the sealant which adheres & cures to form an impermeable membrane • Suitable for painting on the inside of seams during manufacture • Sufficient for an 8-9ft inflatable • Improved formula flows & seals the tube more efficiently 500ml Part No. 5-81305 INFLATABLE BOAT GRP SILICON FREE POLISH • Wipe on – Polish – Wipe off • Gently buffs and polishes to a brilliant shine without scratching • Totally safe on all marine materials • Silicon Free formulation 250ml Part No. 5-81316 DUOCLEAN RIB CLEANER Kit Contains: • Polymarine Inflatable Boat Cleaner • Inflatable Boat finish • Two Cloths • Trigger Spray • One Pair Of Disposable Gloves • Easy to use cleaner for use on inflatable boats and GRP • Suitable for both PVC and Hypalon fabrics • Can be used as an all purpose cleaner NEW • Does not affect aluminium • Removes dirt, white oxidation, grease, oil & petrol deposits • Biodegradable • Supplied in a 1L plastic bottle with trigger spray Part No. 5-81319 Part No. 5-81317 NEW 50 Size 1 Litre 1 Litre 1 Litre 1 Litre 1 Litre SECTION 5 Polymarine Riptide Boat Care Products INFLATABLE BOAT & RIB CARE RIB VALETING KIT FLUSH FIT VALVES Supplied in a draw string PVC bag with blue fabric top, comes complete with two Inflatable Boat Cleaners, one Inflatable Boat Finish, one GRP Silicon Free Polish, two Polishing Cloths, one Sponge, one Trigger Spray and a pair of disposable gloves. Everything that you need to keep your Rib looking good. Part No. 5-81320 • Acetal flush fitting complete inflate/deflate valve • Mechanically fitted into hole 38mm dia. with reinforcing fabric doubler required depending No Handle Pull Handle on pressure. • Servicing is kept to a minimum. Colour Pull Handle Part No. • Overall Dia: 65mm Black No 5-81150 • Height: 43mm Grey No 5-81151 • Baynet fit cap. Black Yes 5-81152 • Push and turn core to deflate Grey Yes 5-81153 BOAT CLEANING & MAINTENANCE RIPTIDE EXTERIOR MULTIPURPOSE CLEANER RIPTIDE INTERIOR ALL-SURFACE CLEANER • Cleans GRP, Gel coat and all hard washable surfaces. • Contains no solvents or CFC’s • Leaves no residue of unnecessary chemicals. • Exceeds legal requirements for biodegradability • Safe to marine life when used as instructed. • Suitable on all washable surfaces, GRP, Gel coat, laminates. • Conforms to EU Directive on Biodegradability. • Cuts through grease and grime • Non-Toxic, food safe for galley surfaces • Chrome-friendly • Contains no solvents or CFC’s • No residue of unnecessary chemicals • Exceeds legal requirements for biodegradability • Safe to use, minimum impact on aquatic life. • Suitable for galley and heads surfaces, plastics, GRP, shower rooms, basins acrylic and chrome. • Conforms to EU Directive on Biodegradability. 500ml Part No. 5-81329 500ml Part No. 5-81328 RIPTIDE HULL AND DECK MAINTENANCE SHAMPOO • Cleans GRP, Gel coat and all hard washable surfaces • Contains no solvents or CFC’s • Leaves no residue of unnecessary chemicals. • Exceeds legal requirements for biodegradability • Safe to marine life when used as instructed • Conforms to EU Directive on Biodegradability • Sodium Chloride Free 1 Litre Part No. 5-81331 RIPTIDE 3 IN 1 TOILET CLEANER • Triple action: cleans, decalcifies and freshens exposed surfaces • Lubricates moving parts and seals • Promotes bio-degrading action in holding tank • Hygienic, naturally powerful and safe to use • Exceeds legal requirements for biodegradability • Minimum impact on aquatic life • Suitable for septic holding tanks 500ml Part No. 5-81333 RIPTIDE WIPE CLEAN GRP CLEANING POWDER • A versatile cleaner to remove stubborn stains on all GRP surfaces • Will remove algae and rust staining 850g Part No. 5-81335 For Riptide Valet Kits see next page >>> RIPTIDE PORTHOLE AND GLASS CLEANER • A smear and streak free formulation ideally suited to days marine environment • Spray directly on to glass or mirror and wipe off with paper towel until dry 300ml Part No. 5-81330 RIPTIDE ECO-FRIENDLY GRP POLISH • Gently buffs and polishes to a brilliant shine without scratching • Totally safe on all marine materials • Suitable for all kinds of surfaces. GRP, hulls, decks and super structure, Gel Coat, Cookers, fridges, enamel, stainless steel & chrome 300ml Part No. 5-81332 RIPTIDE WATER PROOFER • A specially developed formulation of water based waxes and polymers to provide a Water Proofer ideally suited to the marine market • Safe to apply directly on to spray covers, sail covers, clothing etc. • Please note: NOT a permanent water proofer 300ml Part No. 5-81334 SECTION 5 51 Polymarine Riptide Kits & Insta-Lock Snap Davits BOAT CLEANING & MAINTENANCE RIPTIDE FULL ECO-VALET KIT RIPTIDE INTERIOR ECO-VALET KIT RIPTIDE EXTERIOR ECO-VALET KIT Supplied in a PVC drawstring bag containing: • 1 litre Hull and Deck Shampoo • 500ml Exterior Multipurpose Cleaner • 500ml Interior All Surface Cleaner • 500ml 3 in 1 Toilet Cleaner • 300ml Porthole and Glass Cleaner • Sponge Part No. 5-81325 Supplied in a PVC drawstring bag containing: • 500ml 3 in 1 Toilet Cleaner • 500ml Interior Cleaner • 300ml Porthole and Glass Cleaner • Sponge Part No. 5-81326 Supplied in a PVC drawstring bag containing: • 1 litre Hull and Deck Shampoo • 500ml Exterior Multipurpose Cleaner • 300ml 3 in 1 Silicon Free Polish • Sponge Part No. 5-81327 SNAP DAVITS Insta-lock Snap Davits are a lock and lift system, designed to secure and stabilise an inflatable dinghy to the back of a Motorboat or Yacht. • Safe and secure, with a spring loaded lock action • Manufactured from marine grade 316 stainless steel • Provides a safe method to enter and exit a dinghy • When locked and lifted, your dinghy avoids drag and fouling when cruising • Saves space in the marina and saves berthing fees when locked and lifted NEW Snap Davit Swimboard Kit with 4'' Extended Heads Standard Snap Davit Swimboard Kit Insta-Lock Swimboard Kits contain: 2 x Snap Davit Heads 2 x Rubber Pads 2 x Lock On Bars 8 x 50mm Bolts/Nuts 4 x 20mm Bolts/Nuts INSTA-LOCK SNAP DAVIT KITS Description Standard Snap Davit Swimboard Kit Swimboard Kit with 4'' Extended Heads Quick Release Shoe Kit c/w Nuts & Bolts (pair) 5-82010 5-82011 5-82020 5-82025 52 SECTION 5 Part No. 5-82000 5-82002 5-82005 Quick Release Shoe Kit INSTA-LOCK SNAP DAVIT SYSTEM 5-82030 Description Standard Davit Head 4'' Extended Davit Head Large Grey Rubber Pad S/S Locking Bar for Rubber Pad Nut & Bolt Set for Insta-Lock Kits Part No. 5-82010 5-82011 5-82020 5-82025 5-82030 Camco Cleaning & Boating Attachments BOAT MAINTENANCE 5-41912 5-41900 5-41916 5-41902 FIXED LENGTH HANDLES Teardrop profile. Anodized aluminium construction with non-slip TPE hand grip. NEW RANGE CAMCO MULTIPURPOSE HANDLES Length 2' - 4' (60 - 120cm) Teardrop profile. Anodized aluminium construction. 3' - 6' (90 - 180cm) Each handle has two non-slip TPE hand grips. 5' - 9' (150 - 275cm) * comes supplied with boat hook (5-41940) attached. 6' - 11' (180 - 335cm) TELESCOPIC HANDLES Length 2' (60cm) 4' (120cm) Part No. 5-41900 5-41902 Part No. 5-41910 5-41912* 5-41914* 5-41916 CAMCO MULTIPURPOSE HANDLE BRUSH HEAD ATTACHMENTS 7" wide brush head. Rubber perimeter bumper. Available in 4 textures. Extra Soft Light Blue P/No. 5-41920 Soft Dark Blue Part No. 5-41922 Medium Yellow Part No. 5-41924 Stiff White Part No. 5-41926 CAMCO MULTIPURPOSE HANDLE CLEANING ATTACHMENTS Wash Head with Synthetic Wool Pad - Part No. 5-41930 Replacement Pad P/No. 5-41932 Wash Head with Microfibre Pad - Part No. 5-41948 Replacement Pad P/No. 5-41950 PVA Mop Head Part No. 5-41934 Hand Held Squeegee 14'' Part No. 5-41936 Adapter Part No. 5-41938 CAMCO MULTIPURPOSE HANDLE BOATING ATTACHMENTS Boat Hook Part No. 5-41940 Hook depth: 1.5'' (38mm) Fishing Gaff Part No. 5-41942 Hook depth: 3.5'' (89mm) Landing Net Part No. 5-41944 17'' x 20'' x 30'' deep (432 x 508 x 762mm) Paddle Blade Part No. 5-41946 22'' long x 8'' wide (559 x 203mm) XL COLLAPSIBLE BUCKET ROUND COLLAPSIBLE BUCKET 18" wide for ease of use with large wash brushes. Collapses to 23⁄4 " tall to fit in its own easy-to-carry storage bag (included). Made with durable watertight fabric. Dimensions: 181⁄4 " x 91⁄2 " x 101⁄2 " (463 x 241 x 267mm) Capacity: 5 gallon (18 Litre) Part No. 5-42973 The perfect size boating, fishing, camping and more. Watertight fabric, opens easily to 9.25" (235mm) tall and folds to less than 2" (50mm) for compact storage. Zippered storage bag included. Capacity: 3 gallon (11 Litre) Part No. 5-42993 SECTION 5 53 Wilks PVC U, D & Lipped Fendering FENDERING NEW RANGE FLEXIBLE PVC BOAT FENDERING • Flexible PVC fendering profile supplied in pre-packed branded bags with fitting instructions • Manufactured in UV stabilised, phthalate free, and 100% recyclable compound • Non-marking PVC material provides the perfect alternative to rubber fendering which is prone to leaching its colour on both your boat and those around you. • Softer material grade to provide an easier product fit and mimics the feel of rubber (U & D profiles) U Fender to fit over a 9mm flange PVC U FENDERING The U fender is designed to fit over the hull join and provide protection to a high contact area. PVC D FENDERING Length 9m 12m 15m Black P/No. 5-62000 5-62002 5-62004 White P/No. 5-62001 5-62003 5-62005 D Fender with 32mm base Wilks D fender design delivers a high level of impact protection making them well suited to the marine environment. Pack contains D profile, fixing strip, cord plugging and instructions. Length 9m 12m 15m Black P/No. 5-62040 5-62042 5-62044 White P/No. 5-62041 5-62043 5-62045 U Fender to fit over a 6mm flange Length 6m 9m 15m Black P/No. 5-62020 5-62022 5-62024 D Fender with 22mm base Length Black P/No. 9m 5-62060 15m 5-62062 White P/No. 5-62021 5-62023 5-62025 White P/No. 5-62061 5-62063 PVC LIPPED FENDERING Pack includes outer body, profile insert and instructions. PVC EDGE TRIM Edging trim to fit up to a 3mm panel thickness. Dimensions (approx): Width: 10mm Height: 13.5mm Length: 9m Colour Black White 54 Part No. 5-62100 5-62101 SECTION 5 Lipped Fender with 27mm base Height x Length Black P/No. White P/No. 16mm x 9m 5-62080 5-62081 16mm x 15m 5-62082 5-62083 GRP End Cap for above: Black: P/No. 5-62090 White: P/No. 5-62091 Lipped Fender with 50mm base Height x Length Black P/No. White P/No. 21mm x 10m 5-62120 5-62121 21mm x 15m 5-62122 5-62123 21mm x 20m 5-62124 5-62125 No End Cap available. Includes round profile blue insert. Wilks Traditional Range & Decking Pads FENDERING & DECKING The ultimate alternative to wooden rubbing strakes, handrails and toe rails. This range has been created with the traditional boating materials firmly in mind, thus capturing the beauty of wood whilst removing the maintenance. Supplied in a sanded finish to give an attractive woodgrain effect whilst offering all the qualities of PVC to provide the ultimate alternative to wood. It is manufactured from 100% recycled Dek-King®, and so reduces waste. TOP CAPPING PROFILES Partially sanded for final finishing after installation. Width 105mm 120mm Height 35mm 35mm • UV Resistant • Low maintenance • Non-marking • Superior performance • Simple installation • 100% recycled PVC WOOD SECTION Part No. 5-62150 5-62151 Width 70mm Height 13mm Length 4m Part No. 5-62152 TOERAIL SECTION HANDRAIL SECTION Supplied pre-drilled and partially sanded for final finishing after installation. Supplied pre-drilled and partially sanded for final finishing after installation. Incorporates an aluminium strengthening bar and is supplied with end plug to cover fittings. Width x Height: 30 x 60mm Length 1m 2m Length 4m 4m NEW RANGE WILKS TRADITIONAL RANGE Width x Height: 38 x 48mm Length 1m 2m 3m 5m S/S Toe Rail Capping Part No. 5-62153 5-62154 Can be fitted with a 25mm stainless steel strip and works as a fender or plain as a toe rail. Length: 4.89m Part No. 5-62161 Part No. 5-62156 5-62157 5-62158 5-62159 Width x Height: 36 x 27mm Length 5m Part No. 5-62160 WILKS DECKING PADS Available in 3 sizes, these self adhesive decking pads are easy to fit; enhancing steps or deck access treads in cockpit or deck areas. A real wood look but with the qualities of PVC, so removing the maintenance. Letter A B C Length 250mm 500mm 750mm Width 125mm 125mm 125mm Part No. 5-62170 5-62171 5-62172 Supplied in a sanded finish to give an attractive woodgrain effect. SECTION 5 55 Wilks Dek-King DECKING NEW RANGE WILKS DEK-KING BOND The Ultimate Alternative to Traditional Teak The original Dek-King®, a well-established and proven system which has been sold globally for many years. Designed for DIY fabrication without the need for expensive specialist tools, Dek-King® Bond features a tongue and groove joint and a sanded finish on the base to enhance adhesion. These profiles have a traditional teak finish with black caulking. CAULKED SINGLE PLANK CAULKED MARGIN EDGE PLAIN MARGIN EDGE 50mm wide x 10m long. Part No. 5-62180 50mm wide x 10m long. Part No. 5-62181 50mm wide x 10m long. Part No. 5-62182 BULLNOSE PROFILE T CAULKING STRIP 70mm wide x 10m long. Part No. 5-62183 5mm wide x 10m long. Black Part No. 5-62184 For use on stairs or any other area where an overhang is desirable. CAULKING 3 PLANK 150mm wide x 10m long. Part No. 5-62185 BULLNOSE STEP SOLID KING PLANK 125mm wide x 10m long roll. Part No. 5-62186 This plank has no caulking effect or channels incorporated. Supplied in a partly sanded finish to give a teak appearance. • Gives a solid teak appearance to steps and edges • Supplied in a sanded finish to give a teak appearance 17mm wide x 45mm high x 5m long. Part No. 5-62187 STELMAX ADHESIVE Used to join the strips of Dek-King® Bond together This 135ml tube will bond approximately 2m2 of tongue and groove joint. Clear Part No. 5-62188 Black Part No. 5-62189 Dek-King Bond can be bonded to the deck surface using ProLoc 248 Bedding Adhesive - see page 29. 56 SECTION 5 Please note: 1 x 10m coil of 50mm Dek-King will cover an area of 0.5m2 Treadmaster Decking DECK MATTING TREADMASTER ORIGINAL DECKING Treadmaster Original is the world leader in anti-slip decking, combining exceptional slip resistance with durability and comfort in wet and dry conditions. It provides a high degree of insulation and reduces reflective glare from deck surfaces. The benchmark for anti-slip deck coverings for over thirty years, there are two types available: traditional diamond or smooth pattern, and each comes in five different colours. • Does not affect the performance or stability of the craft • Ideal for anywhere requiring an easy to fit anti-slip covering • Colours that make them look right at home in almost any situation • Easy to trim using a craft knife or sharp scissors • Unaffected by exposure to sea water Colours available: Green*, Black, Grey, Light Grey, Blue and Fawn *Green only available in diamond decking Diamond Decking Smooth Decking Diamond pattern provide the best level of anti-slip performance and are suitable for all applications right up to the most testing of environments Smooth pattern provide the best level of comfort whilst retaining great anti-slip performance. Description Size (mm) Diamond Decking 1200 x 900 Diamond Pad (2pk) 275 x 135 Diamond Pad (2pk) 412 x 203 Diamond Pad 550 x 135 Smooth Decking 1200 x 900 Smooth Pad (2pk) 275 x 135 Grey 5-61000 5-61020 5-61040 5-61050 5-61010 5-61030 Lt Grey 5-61001 5-61021 5-61041 – 5-61011 5-61031 Fawn 5-61002 5-61022 5-61042 5-61052 5-61012 5-61032 Black 5-61003 5-61023 5-61043 5-61053 5-61013 5-61033 Blue 5-61004 5-61024 5-61044 5-61054 5-61014 5-61034 Green 5-61005 5-61025 – – – – Self-adhesive Grip Pads TREADMASTER ACCESSORIES Contact Adhesive 2 Part Epoxy Adhesive 600g Coverage Approx 3 Sheets (1200 x 900mm). Combining the benefits of a contact adhesive with a high level of water resistance, this product provides an ideal method of fitting Treadmaster. Walk on the deck immediately after fitting, Treadmaster Marine Contact is ideal for fixing to fiberglass, wood or steel decks. Preparation and application details shown on the can. Part No. 5-61062 Coverage Approx 2 Sheets (1200 x 900mm). This two pack epoxy adhesive is designed to provide the ultimate in bonding performance. Ideal for use on a wide range of deck materials, it provides a bond which is suitable for the most arduous of conditions. Full instructions are on the can. Part No. 5-61060 Treadcote Rejuvenator Paint Cleaner Treadcote is designed to rejuvenate the appearance of heavily weathered or stained Treadmaster Original decking. The product is easy to apply with full surface preparation and can be applied by brush or roller. A combination of carefully selected chemical components securely interlocked to form a powerful sanitary maintenance product. Treadmaster cleaner gives multi-action performance: it cleans, removes soap films and cuts and dissolves residual haze, conditioning and revitalising the surface being cleaned. Part No. 5-61064 Grey Fawn Blue Part No. 5-61070 Part No. 5-61072 Part No. 5-61074 SECTION 5 57 Quicksilver Oils & Lubricants OILS & LUBRICANTS PREMIUM PLUS 2 STOKE TC-W3 OUTBOARD OIL PREMIUM 2 STOKE TC-W3 OUTBOARD OIL Specifically formulated with a marine additive package to meet the needs of low to mid-horsepower outboard engines. • For use in normal marine operating conditions • Exceeds TC-W3 standards • Reduces rust and corrosion of internal components • Provides enhanced detergency to help keep your engine free of deposits • Meets all outboard and personal watercraft manufacturers’ recommendations for use of TC-WII and TC-W3 oils in pre-mix or oil-injected models Size 1 Litre 4 Litre 10 Litre Qty 6 3 2 Part No. 5-38021 5-38022 5-38023 OPTIMAX/DFI 2 STOKE OUTBOARD OIL Specifically formulated and developed to meet the needs of all Direct Fuel Injected (DFI) 2-stroke outboard engines. • Specifically formulated to meet the unique performance demands of next generation two-stroke DFI engines • Incorporating a synthetic, high viscosity, lubricity additive to provide maximum scuff protection at the high operating temperatures associated with DFI engines • Enhanced detergency additives providing superior piston cleanliness to prevent ring sticking. • Formulated with improved rust protection for the unique demands of the marine environment. Size 4 Litre 10 Litre Part No. 5-38037 5-38038 Size 1 Litre 4 Litre 10 Litre Qty 6 3 2 Part No. 5-38026 5-38027 5-38028 HEAVY DUTY DIESEL ENGINE OIL 15W 40 Specifically formulated and developed to meet the needs of all marine diesel engines. • 15W-40 oil formulated to combat sludge and varnish formation • Contains a higher additive level than standard fleet oils, providing better protection • Provides excellent shear stability to assure stay-in-grade performance, even in highly stressed applications • Protects internal engine components from corrosion and wear • Provides excellent water tolerance. Size 4 Litre Qty 3 Part No. 5-38042 PERFORMANCE 4 STOKE OUTBOARD OIL 10W 30 STERNDRIVE & INBOARD 4 STOKE OIL 25W 40 Specifically formulated and developed to meet the needs of all 4-stroke outboard engines. • Developed for the rigours of the marine environment • Field-proven to provide superior lubrication as well as protection from corrosion and wear • Low-temperature viscosity formula allows for easy cold temperature starting • Shear stable additives prevent oil degradation. • Enhanced formula developed with heavy duty additives • Exceeds all 4-stroke outboard engine manufacturers’requirements and surpasses API service requirements for SJ, CF-2 and CH-4 Specifically formulated and developed to meet the needs of high-output sterndrive and inboard engines. • Multi-viscosity 25W-40 oil formulated to eliminate thermal breakdown (no viscosity improvers necessary) under extreme temperatures and loads • Field-tested & proven in petrol & diesel applications • Provides superior lubrication and protection of internal components from corrosion, wear, scuffing and scoring – even in higher temperature engines • Meets and exceeds API service requirements for SJ, CF-2, CH-4 with a multi-functional additive that assures “Marine Grade” oil performance. Size 1 Litre 4 Litre 58 Qty 3 2 Specifically formulated with a higher concentration marine additive package to meet the needs of high-horsepower outboards, including direct fuel-injected engines. • For use in extreme marine operating conditions • Far exceeds Mercury in-house test standards which are more stringent than the industry’s TC-W3® standard • Cleanest burning-reduces carbon build-up in exhaust system • Reduces smoke • Superior lubrication • Meets all outboard and personal watercraft manufacturers’recommendations for use of TC-W3 oils in pre-mix or oil-injected models Qty 6 3 Part No. 5-38045 5-38046 SECTION 5 Size 1 Litre 4 Litre Qty 6 3 Part No. 5-38048 5-38049 DELIVERY Please contact your nearest Aquafax depot for shipping details of all items on this page. Quicksilver Oils & Lubricants OILS & LUBRICANTS SYNTHETIC 2 STROKE PWC OIL SYNTHETIC BLEND 4 STROKE OUTBOARD OIL 25W 40 Formulated specifically for unique conditions found in marine environments, with full synthetic formula for maximum engine protection in all brands of 2-cycle PWC’s and Sport Boats. Specifically formulated and developed to meet the needs of all 4-stroke outboard engines. • Newly formulated to provide the highest level of performance and protection available today from a 4-stroke outboard oil • Recommended oil for use in Verado engines. • For use in all 4-stroke engines • First in class for all durability test properties • Industry-leading internal marine engine corrosion protection • Inherently biodegradable, clean burning full synthetic provides low smoke and smell • Outstanding detergency keeps engine clean of deposits and rings free, to maintain ultimate power and performance • Provides outstanding wear and corrosion protection which helps extend engine life • Minimizes performance-robbing carbon deposits • Maintains peak engine performance and reliability, meets or exceeds manufacturer’s warranty requirements, (using this product will not void manufacturer warranties) • Exceeds JASO FD and ISO EGD • Recommended for use in all two-stroke personal watercraft engines, can be used in Size oil-injected or pre-mix applications 1 Litre Size 1 Litre 4 Litre Qty 6 Part No. 5-38090 SYNTHETIC BLEND 4 STROKE OUTBOARD OIL 25W 50 Qty 3 Part No. 5-38052 5-38053 SYNTHETIC BLEND 4 STROKE STERNDRIVE AND INBOARD OIL 25W 40 Formulated for pressure charged and intercooled engines and contains an advanced additive system that provides unmatched performance. • Industry leading corrosion protection • Enhanced protection against varnish build-up and sludge formation in critical engine parts • Improved lubricity benefits internal engine parts for extended reliability • Ideal for commercial and recreational use • Exceeds all outboard manufacturers’ oil requirements and FC-W® marine qualifications Size 4 Litre Qty 6 3 Part No. 5-38084 For more Oils & Lubricants see pages 63 & 65 Specifically formulated and developed to meet the needs of all 4-stroke marine engines. • Advanced protection not offered by conventional automotive oils • For use in all MerCruiser and other sterndrive engines • For use in all 4-stroke engines • Superior friction and wear protection • Industry-leading internal marine engine corrosion protection Size 946ml 4 Litre Qty 6 3 Part No. 5-38055 5-38056 SYNTHETIC 4 STROKE CATALYST STERNDRIVE & INBOARD OIL 20W 40 Formulated to provide optimum operation and longer life for the critical engine catalyst systems that safeguard our environment. Catalysed marine engine use • Extended catalytic converter life due to low phosphorus formation Sterndrive and Inboard use • Three distinct synthetic base stocks provide superior wear protection and lubrication • Provides extreme salt water and freshwater rust protection • Reduced oil consumption, improved pumping ability • A more stable, high viscosity oil that prevents dirt and soot from settling on metal surfaces Size • Exceeds all outboard manufacturers’ oil requirements & FC-W® marine qualifications 1 Litre Qty 6 Part No. 5-38087 Quicksilver products are available as single containers, add /1 after the case part no. e.g 5-38021/1 DELIVERY Please contact your nearest Aquafax depot for shipping details of all items on this page. SECTION 5 59 Quicksilver Oils & Lubricants OILS & LUBRICANTS PREMIUM GEAR OIL 80W 90 HIGH PERFORMANCE GEAR OIL SAE 90 Specifically designed and developed to meet the needs of outboard lower units. Engineered to provide maximum protection for sterndrive and outboard lower units. • Provides excellent lubrication and wear resistance for outboard lower unit gears • Exclusive formula provides extended gear life in extreme conditions including high-speed and high horsepower applications • Great for both high and low horsepower engines under varying operating conditions • Extensively tested to provide excellent protection against corrosion and excessive wear. • Special additives protect gears from metal-to-metal contact • Specifically formulated to help prevent failures due to water entering the gear housing. • Exclusive formulation helps improve film adhesion to gears. • Since no industry wide standards exist concerning marine gear oils, it is essential to use products such as this which has been specifically designed and tested for marine applications • Do not mix with High Performance Gear Oil • Extreme-pressure synthetic additives protect gears from metal to metal contact. Size 237ml 1 Litre 10 Litre Qty 12 6 2 Part No. 5-38100 5-38102 5-38104 • Since no industry-wide standards exist concerning marine gear oils, it is essential to use products such as this which has been specifically designed and tested for marine applications. Size 237ml 1 Litre 10 Litre • Do not mix with Premium Gear Oil. Qty 12 6 2 Part No. 5-38110 5-38112 5-38114 Quicksilver products are available as single containers, add /1 after the case part no. e.g 5-38021/1 QUICKARE FUEL TREATMENT OIL Quickare is a complete fuel treatment that can be used in all grades of gasoline, including ethanol blends. Use Quickare at every fill-up to: • Maximize engine performance with all grades of gasoline • Help control corrosion, gum and varnish build-up, and phase separation associated with ethanol-blended fuel • Help control moisture and corrosion problems associated with non-ethanol fuel • Clean up existing varnish and gum deposits from fuel lines, tanks, carburetors and injectors, intake valves, and spark plugs • Keep fuel fresh between fill-ups - up to 12 months Each 355ml bottle treats 227L Size 355ml 60 Qty 12 Part No. 5-38120 SECTION 5 The Quicksilver Fuel Care System is one complete system - specially formulated by the people who made your engine, with decades of experience on all kinds of engines - to help it run its best. It's as easy as 1, 2, 3 - regardless of whether you use ethanol- or non-ethanol-blended fuels. QUICKLEEN ENGINE & FUEL SYSTEM CLEANER QUICKSTOR FUEL STABILIZER Quickleen is a deep cleaning treatment that should be used periodically. Aggressive cleaners work to quickly and thoroughly remove carbon deposits from carburetors and injectors, intake valves, spark plugs, piston crowns and cylinder heads. This product does not contain fuel stabilizers. Use with Quickare to prevent fuel breakdown and oxidation. Use Quickleen to: • Prevent engine knocking and piston seize-up • Extend spark plug life Add Quickstor to fuel before storing your engine to ensure your fuel is ready to go at the start of the next season. Use Quickstor to: • Prevent regular and ethanol-blended fuel from breaking down and oxidizing • Prevent fuel system corrosion • Prevent gum and varnish from forming in the fuel and settling in fuel lines and tanks, carburetors and injectors • Keep injectors and carburetor lubricated • Stabilize fuel for up to a year Each 355ml bottle treats 227L Size 355ml Qty 12 Part No. 5-38124 Each 355ml bottle treats 227L Size 355ml Qty 12 Part No. 5-38122 DELIVERY Please contact your nearest Aquafax depot for shipping details of all items on this page. Quicksilver Oils & Lubricants OILS & LUBRICANTS FUEL INJECTOR CLEANER OTC® INJECT-R-KLEEN Formulated to clean the injectors and restore original spray pattern - which helps prevent recurring problems, and reduces intake and port deposits. Clean fuel injectors mean cleaner running, more efficient engines and lower emissions. No mixing required - use right from the can. Size 473ml Qty 12 POWER TUNE ENGINE CLEANER STORAGE SEAL FOGGING OIL For use in all 2- and 4- stroke carbureted and fuel injected petrol engines. Assists in restoring lost power due to carbon, gum and varnish deposits that accumulate in the combustion chambers of petrol engines, as a result of normal engine use. Removing these deposits helps improve fuel/air flow and overall engine performance. Specially formulated compound for all 2- and 4- stoke engines that forms a protective barrier against rust on internal metal surfaces. To be used at the end of the season or whenever it will not be used for more than a month. Size 340g Part No. 5-38126 Qty 12 Size 340g 3.78L Part No. 5-38135 Qty 12 2 Part No. 5-38143 5-38145 HIGH PERFORMANCE EXTREME GREASE CORROSION GUARD AEROSOL • Calcium sulfonate-based NLGI grease • Excellent rust and corrosion protection • Formulated for high-temperature & high-load applications • 100% compatible with lithium-based greases Corrosion Guard is a rust inhibitor that forms a water resistant barrier on non-painted and painted surfaces. Protects outdrives, lower units and power trim motors from rust. Remains clear and doesn’t peel. Can also be used to prevent further paint damage in areas where undercutting and blistering have occurred. Do not spray on surfaces coated with antifouling or biocide paint. For use in the following applications: steering systems/ cable linkages, throttle and shift cables, drive shaft splines, gimbal bearings, U-joints, suspension systems, chassis, ball joints, and trailer wheel bearings. Size 227g Qty 12 Part No. 5-38141 Use Quicksilver grease gun (P/No. 5-38171) 2-4-C MARINE LUBRICANT WITH PTFE Quicksilver 2-4-C marine grease is a multi-purpose lubricant that withstands extreme friction and won’t break down when mixed with water. Contains rust and oxidation inhibitors to prevent corrosion. Also contains PTFE for added friction reduction and reduced wear. Recommended uses: steering systems, cable linkages, throttle and shift cable and linkages, remote controls, prop shafts, swivel pins, drive shaft splines, tilt lock mechanisms, tilt tubes, hinge pins and trailer wheel bearings. Size 227g 3 x 85g 397g Qty 12 10 4 Part No. 5-38150 5-38152 5-38154 Use with Quicksilver tubes gun (5-38171) Quicksilver cartridge gun (5-38170) – Size 312g Qty 6 Part No. 5-38147 POWER TRIM & STEERING FLUID • For use in power trim and steering systems • Unique formula helps prevent corrosion, oxidation and wear • Suitable for high temperature applications Size 237ml Qty 12 QUICKSILVER GREASE GUN QUICKSILVER GREASE GUN For 85g cartridge (5-38152). Part No. 5-38170 For 227g cartridge (5-38150). Part No. 5-38171 DELIVERY Please contact your nearest Aquafax depot for shipping details of all items on this page. Part No. 5-38160 SECTION 5 61 Quicksilver Coolants & Shakespeare Fuel Additives COOLANTS & FUEL ADDITIVES EXTENDED LIFE COOLANT ANTI-FREEZE HEAVY DUTY 9 LITRE OIL DRAIN CAN • Ready to use premixed 50/50 formula (deionised water) • Ethylene glycol-based product • Will not cause gelling and provides superior corrosion protection • Protects all cooling system metals including aluminium • Silicate and Phosphate free • Provides anti-freeze protection to -36ºC (-34ºF) Size 3.78ml Qty 4 Plastic oil drain can, ideal for safe and clean oil sump drain. Dimensions: (H x W x D) 39 x 29 x 12.5cm Part No. 5-50760 Part No. 5-38182 MARINE ENGINE COOLANT Low silicate formula specially recommended for four stroke diesel and petrol engines with closed cooling systems • Coolant additives provide protection against corrosion and scale formation • Ready to use premix formula requires no mixing or additives • Low silicate formula prevents silicate gelling which can restrict engine cooling passages and cause overheating • Provides antifreeze protection down to -36ºC (-33ºF) Size 5 Litre Qty 2 Part No. 5-38185 Marine engines are subjected to some of the harshest and most demanding environments imaginable, and recent changes in the chemical formulations of marine fuels have introduced a new level of adversity to an already taxed service life. Shakespeare® Marine's specifically formulated marine fuel additives repair and prevent fuel-related lost engine performance in both petrol and diesel marine engines. REPAIR FUEL TREATMENT PREVENT FUEL ADDITIVE • Removes water from petrol • Repairs poor running engines • Reverses the effects of bad fuel • Helps fix ethanol issues • Removes carbon & varnish • Treats up to 76ltrs 2 & 4 stroke Size Qty 236.6ml 9 236.6ml each Part No. 5-32004 5-32004/1 • Stabilizes petrol • Prevent water & fuel issues • Preserves engine performance • Prevents carbon & varnish • Full ethanol protection • Keeps fuel system clean • Treats up to 300ltrs 2 & 4 stroke Size Qty 236.6ml 9 236.6ml each Part No. 5-32001 5-32001/1 DIESEL FUEL TREATMENT • Disperses water • Repairs poor running engines • Full bio-diesel protection • Improves emissions/ horsepower • Cleans injectors & pumps • Removes carbon & varnish • Treats up to 300ltrs Size Qty 236.6ml 9 236.6ml each Part No. 5-32007 5-32007/1 LANOCOTE® – CORROSION CONTROL • Prevents thread freeze-up • Prevents electrolysis corrosion • Seals porous surfaces • Neutralizes acids, alkalies, salts LanoCote® 4oz jar Part No. 5-77791 62 SECTION 5 LanoCote® is the choice of marine professionals for long term corrosion control. It is extremely effective in preventing and stopping corrosion on all types of metals under all environmental conditions. Formulated to withstand salt water marine conditions, LanoCote® is particularly useful in preventing thread seizure due to all types of corrosion on boats and machinery. Applied during assembly, LanoCote® will greatly assist in easy dismantling years later. DELIVERY Please contact your nearest Aquafax depot for carriage details. Morris Lubricants MORRIS LUBRICANTS GOLDEN FILM SAE 30 (formerly ‘Supreme 30’) SERVOL PERFORMANCE PLUS 15W/40 APPLICATION: • Golden film SAE 30 is an ideal choice for lightly loaded older diesel engines used in canal boats, watercraft and generators e.g Lister and Perkins PERFORMANCE: • Recommended for use in engines where modern multigrade, high additive level oils cannot be used. Can dramatically reduce the likelihood of bore glazing. APPLICATION: • High quality mineral oil designed for use in modern petrol, diesel and turbo charged engines. PERFORMANCE: • Provides a high level of engine cleanliness and controls the formation of high temperature lacquers and low temperature sludges • Contains an effective dispersant to minimise oil thickening API: CC/SD TBN, mg/KOH/g: 4.0 API: CG-4/CF-4/SJ/SL TBN, mg/KOH/g: 11.0 Description Bulk Pack 4 x 5L plastic bottles Single 5L plastic bottle Part No. 2-74923 2-74923/1 Description Bulk Pack 4 x 5L plastic bottles Single 5L plastic bottle GOLDEN FILM 10W/40 CLASSIC MARINE ENGINE OIL • High quality multi grade engine oil designed for petrol and diesel engines, such as in canal boats, where SAE15W/40 may be specified to ensure lubricant flows more rapidly at low temperatures improving component protection • Additive level has been chosen and optimised to prevent bore glazing and bore polishing Ideal for Canal Boats API: CC/SF Description Bulk Pack 4 x 5L plastic bottles Single 5L plastic bottle Part No. 2-74924 2-74924/1 Part No. 2-74925 2-74925/1 AQUAMAX 2 STROKE OUTBOARD OIL APPLICATION: Recommended for two stroke water cooled outboard engines using premix or oil injection, from high powered down to small cylinder auxiliary engines. PERFORMANCE: Aqua Max 2 has been developed to meet the need for a specialised ash free outboard motor oil for today’s high powered multi cylinder two cycle engines. The formulation provides an excellent lubricating film giving an improved engine performance and reduces engine wear. Description Part No. Bulk Pack 12 x 1Lt 2-74934 Single 1Ltr Bottle 2-74934/1 Description Part No. Bulk Pack 4 x 5Ltr 2-74935 Single 5Ltr Container 2-74935/1 • Maximum film strength • Freedom from ring sticking • No plug fouling or pre-ignition • Anti-wear, anti-scuffing protection • Reduced smoke and clean burning characteristics • Reduced deposit formation in ports Physical Characteristics Colour Blue/Purple TBN, mg/KOH/g: 4.5 Certified by: National Marine Manufacturers Association (NMMA): TC-W3TM R-94102B JASO FB K2EP LONGLIFE GREASE APPLICATION: The high degree of water tolerance makes K2EP ideal for boat trailer bearings, where there is a combination of immersion and high speed road work. PERFORMANCE: K2EP is a mineral oil based, lithium complex, soap-thickened grease, containing performance additives. The additives provide extreme pressure (EP), oxidation, rust and corrosion protection, ensuring effective lubrication is achieved even under the most severe conditions. It has excellent sealing properties which help protect bearings against corrosive atmospheres and the ingress of water, dust and abrasive particles. This grease out performs conventional Lithium greases at high temperatures. Suitable for all general industrial, automotive and any bearing requiring long life high performance Physical Characteristics Appearance: NLGI: Thickener: Operating Temp Range: Red Sparkle, Tacky 2 Lithium Complex -20ºC to +150ºC DELIVERY Please contact your nearest Aquafax depot for carriage details. Size 400g cartridge Part No. 2-74915 K99 WATER RESISTANT GREASE APPLICATION: Specially designed by Morris to feed evenly around the propeller shaft in the stern tube. PERFORMANCE: Outstanding water resistance qualities providing excellent protection of parts from corrosion and has good sealing properties. Size 500gm Tub 3kg Tub 12.5kg Tub Part No. 2-74911 2-74912 2-74913 Physical Characteristics Appearance: Light Brown Smooth Grease NLGI: 2/3 Operating Temp Range: -20ºC to +110ºC SECTION 5 63 PELA Oil Extractors LUBRICANT ACCESSORIES NEW RANGE PELA OIL EXTRACTORS Pela oil extractors are manually operated vacuum pumps for fluid removal. The most common application is oil changing. All you need to do is pump the unit to create a powerful vacuum. Then watch the old oil get sucked out of the engine and into the container. Our quick, easy and clean process eliminates the need to remove drain plugs or tilt equipment - ideal for areas that are confined or inaccessible. PELA 2000 PELA 6000 Simply pump 5 to 10 times in a row to create a powerful vacuum, then watch the oil drain neatly into the calibrated container. With a capacity of 2.5 litres, it's ideal for small 4-stroke outboard engines up to 50 HP (depending on make), sailboats with small diesel engines (9 HP to 18 HP), and PWCs with 4-stroke engines. Part No. 2-74700 Simply pump 10 to 20 times in a row to create a powerful vacuum. A sturdy, see-through container (6.0 litres) neatly captures the oil. The calibrated wall lets the user know how much oil has been removed. A pour spout is included to help emptying. Pump is removable for easy storage. Part No. 2-74701 Specification: Capacity: Height: Container Dia.: Tube: Specification: Capacity: Height: Container Dia.: Tube: 2 Litres 44.5cm (17.5'') (assembled) 18cm (7'') Probe 0.5cm (3⁄16 '') OD, Length 110cm (43'') Clear Section: 1cm (3⁄8 '') OD, Length 100cm (39'') PELA 400 PELA 650 Requires just 4 to 15 strokes to create a powerful vacuum. The integrated container (4.0 litres) then neatly captures the oil preventing messy spills and the calibrated wall allows easy measurement of the oil extracted. A built-in float switch automatically stops extraction as soon as capacity is reached and a pour spout facilitates emptying. This is a durable, maintenance free unit and is ideal for professional use. Part No. 2-74702 Our original pump, since 1996, and a long time favourite among technicians because of its power and durability. Requires just 4 to 15 strokes in a row to create a powerful vacuum. The integrated container (6.5 litres) then neatly captures the oil preventing messy spills, and the see-through, calibrated container lets the user know how much oil has been extracted. A built-in float switch automatically stops extraction as soon as capacity is reached and a pour spout facilitates emptying. With the pump housed inside the container, the “Big PELA” is a durable, maintenance free unit. Part No. 2-74703 Specification: Capacity: Height: Cylinder Dia.: Tubes: Extension Tube: 4 Litres 50.8cm (20'') (assembled) 16cm (6.25'') 0.5cm (3⁄16 '') & 0.6cm (1⁄4 '') OD Length 120cm (47'') each Length 100cm (39'') Specification: Capacity: Height: Cylinder Dia.: Tubes: 0.5cm Extension Tube: PELA PRO 14 A heavy duty unit for big engines - with a 14 litre capacity, the PELA Pro 14 is the largest on the market. It comes with a new improved, patent pending mechanism, and for durability, the pump unit is also housed inside the container. Just pump 20 to 25 times in a row to create a powerful vacuum and then watch the oil drain into the seethrough, calibrated container. An internal float switch shuts off extraction automatically when full. Ideal in the workshop for servicing large engines or several smaller ones before emptying. Ideal for boats with large diesels and those with twin engines. Part No. 2-74704 64 6 Litres 54.6cm (21.5'') (assembled) 23cm (9'') Probe 0.5cm (3⁄16 '') OD, Length 110cm (43'') Clear Section 1cm (3⁄8 '') OD, Length 100cm (39'') SECTION 5 6.5 Litres 63.5cm (25'') (assembled) 16cm (6.25'') (3⁄16 '') & 0.6cm (1⁄4 '') OD Length 120cm (47'') each Length 100cm (39'') Specification: Capacity: Height: Cylinder Dia.: Tubes: 0.5cm Extension Tube: 14 Litres 65cm (25.5'') assembled 21.2cm (8.35'') (3⁄16 '') & 0.6cm (1⁄4 '') OD Length 150cm (60'') each Length 150cm (60'') For Oils & Lubricants see pages 58 to 63 WD-40 Lubricants & Tetrosyl Consumables WD-40 LUBRICANTS WD-40 Examples of Marine Applications for WD40 • Protects metal parts from corrosion • Protects winches from moisture and salt to ensure proper functioning • Displaces water and protects boat motors from moisture, even during wet winters. WD-40 also restores the electrical contacts and switches • Lubricates and frees jammed mechanisms, and also removes all squeaks • Protects against corrosion and salt, loosens sticking switches WD-40 protects metal from rust and corrosion, penetrates stuck or jammed parts, displaces moisture, and lubricates just about anything. Also cleans grease, grime, and other marks from most surfaces Description Aerosol Aerosol Smart Straw Aerosol Smart Straw Aerosol Size 200ml 200ml 400ml 400ml Qty 12 Each 24* Each Part No. 5-26401 5-26401/1 5-26403 5-26403/1 * Display Pack 3-IN-ONE Multi-Purpose Drip Oil 3-IN-ONE Multi-Purpose Aerosol with PTFE 3-IN-ONE’s original drip oil lubricates, cleans and prevents rust. Its precise, easy-to-use drip spout enables precise lubrication, with no overspray or splatter. It can be used on tools, wheels, fans and moving parts. 3-IN-ONE with added PTFE is an aerosol lubricant specifically formulated to deliver outstanding lubrication and longer lasting protection through its low friction characteristics. PTFE stands for polytetrafluoroethylene, sometimes known as Teflon. This fantastic new formula is ideal for chains, cables and gear mechanisms and is an essential tool to keep your boat running smoothly. Description Canister Canister Size 100ml 100ml Qty 12 Each Part No. 5-26404 5-26404/1 3-IN-ONE Multi-Purpose Aerosol • Ensures longer-lasting protection against rust and the elements • Provides high performance lubrication in demanding conditions • Stops squeaks and lubricates moving parts 3-IN-ONE aerosol spray is based upon the drip oil formula. It has all the advantages of the top performing product, with the added convenience of being an aerosol spray. It has literally hundreds of uses and comes in a handy 200ml can. • Provides long-lasting lubrication • Protects against rust & corrosion • Stops squeaks & lubricates moving parts Description Aerosol Aerosol Size 200ml 200ml Qty 12 Each Description Aerosol with PTFE Aerosol with PTFE Part No. 5-26405 5-26405/1 Size 250ml 250ml Qty 12 Each Part No. 5-26407 5-26407/1 TETROSYL OILS, GREASE & CONSUMABLES WHITE SPRAY GREASE TETROCLEAN ENGINE CLEANER AND DEGREASER Formulated with added PTFE to repel water, resist heat & salt, and to protect against corrosion. Special non-drip formula, particularly suitable where longer term lubrication and protection are required. 12 x 400ml 400ml Single Removes ingrained grease, oil, dirt & grime from all vehicle engines in minutes. Unique 'water washable' formula is also suitable for removing tar spots and cleaning paint brushes and floors. Part No. N-55930 Part No. N-55930/1 DOUBLE TT 6 x 1L P/No. N-55920 1L Single P/No. N-55920/1 ARE YOU STARTIN’? 4 x 5L P/No. N-55921 5L Single P/No. N-55921/1 HANDY OIL A high quality, multi-purpose maintenance fluid suitable for home, garden and workshop. • Penetrates - loosens rusted parts • Lubricates - stops squeaks in free mechanisms & locks • Protects - helps to prevent corrosion on metal surfaces Eases engine start in cold weather - ideal for petrol & diesel vehicles. 400ml aerosol. A light oil suitable for many uses - in the car, home & general DIY. Formulated from high quality mineral oils & anti-corrosion additives, to give lubrication and added protection against rust and seizure. 12 x 400ml Part No. N-55925 400ml Single Part No. N-55925/1 6 x 400ml Part No. N-55906 400ml Single Part No. N-55906/1 12 x 125ml Part No. N-55915 125ml Single Part No. N-55915/1 SECTION 5 65 Additives, Antifreeze, & Consumables CONSUMABLES MORRIS UNIVERSAL ANTI-FREEZE Recommended for all year round use, it protects all water cooled engines from frost damage down to -34ºC and ice damage -50ºC (at 50% of total coolant). For full details see Section 2 Description Bulk pack of 12 x 1Lt bottles Single 1Lt bottle Bulk pack of 4 x 5Lt containers Single 5Lt container Part No. 2-74970 2-74970/1 2-74972 2-74972/1 FREEZE BAN Non toxic antifreeze for boats or caravans fresh water systems. It will protect the system down to - 15°C. Safe, odourless & tasteless, it can be used at full strength for boat engine winterization. Part No. 9-90760 (4 x 5L) Part No. 9-90760/1 (1 x 5L) Recommendation for use A 5 litre container is normally enough when diluted by half with water to fill an average fresh water installation consisting of water pump, water heater, two hand basins, sink & shower. SUPERCLEAN MORENDO DD DIESEL FUEL ADDITIVE A multifunctional diesel fuel additive that will improve ignition quality, combustion and storage of distillate fuels. It is designed to be added to diesel and distillate burner fuels in bulk storage tanks, or to the fuel tanks of diesel engined vehicles and marine craft. • Increased Cetane number • Improved Lubricity • Injector cleanliness • Improved dispersancy • Improved fuel stability • Water tolerance • Foam Control Bulk Pack of 12 x 500ml Part No. 2-74998 Single 500ml bottle Part No. 2-74998/1 Physical Characteristics Colour: Amber Treatment Rate: 1 part Superclean Morendo DD to 400 parts fuel For single coils add /1 to the part number i.e 5-77502/1 • Suitable for LPG Gas, natural gas and potable water • Metal thread sealant for use with copper, steel, brass, bronze, aluminium & alloys • Individual or retail pack of 10 bottles available Part No: 1-59071/1 Single bottle Part No: 1-59071 Box of 10 SUPERBLEND ZERO LEAD 2005 A lead free fuel treatment, developed to protect against valve seat recession in 4-stroke engines designed to run on leaded petrol. It is a carefully balanced blend of potassium based organic compounds, that provided enhanced lubricity and wear protection previously attributed to leaded additives. The product does not increase particulate emissions or affect fuel consumption. It is catalytic converter friendly and will not contribute to inlet valve sticking or spark plug fouling. IT SHOULD NOT BE USED IN CONJUNCTION WITH OTHER FUEL ADDITIVES Bulk Pack of 12 x 500ml Part No. 2-74999 Single 500ml bottle Part No. 2-74999/1 Physical Characteristics Colour: Amber Treatment Rate: 1 part Superblend Zero Lead 2005 to 300 parts fuel FUEL CANS 5 LITRE TETRA FUEL CANS Grey expanded polyethylene with self adhesive waterproof backing. Density: 33kgm3. Available in boxes or per single coil. • Handy 50ml bottle with applicator • Certified to EN751 part 1 and meets pressure requirements for part 2 (Class A & B) CLOSED CELL FOAM TAPE Closed Cell Foam Tape can be used to form a weather tight seal when installing windows, portholes, deck hatches, ventilators etc. The rolls come with adhesive on one side to enable the foam to be positioned and held in place to make installation easy. CLESSETITE LPG THREAD SEALANT • Self adhesive on one side • Available in 12, 19, 25 & 50mm wide rolls • Easy and clean to use • Anthracite colour The Tetracan is the first no-topple, flat base design, manufactured from high molecular polyethylene. All cans come with a flexible pouring spout and are available in a range of colours. Tetracans conform to S.I.1982/630 standards. Description Qty Part No. Single P/No. Green Unleaded 10 5-50761 5-50761/1 Black Diesel 10 5-50762 5-50762/1 Part No. Qty Width Thickness Length Uses 5-77502 25 Coils 12mm (1⁄2 ") 3mm 15m Sealing Fittings, Windows, 5-77509 15 Coils 19mm (3 ⁄4 ") 3mm 15m Track etc. 5-77515 12 Rolls 25mm (1") 6mm 10m Weed Hatch Rubber 5-77520 6 Rolls 50mm (2") 6mm 10m 5-77500* 1 Roll 20mm (3 ⁄4 ") 3mm 25m Sealing windows 3 * Black medium density (200kgm ) reverse wound PVC self adhesive foam strip 66 SECTION 5 DELIVERY Please contact your nearest Aquafax depot for carriage details. Tetrosyl Consumables TETROSYL CLEANING & CONSUMABLES TRIPLEWAX 100% COTTON POLISH CLOTHS TRIPLEWAX SPONGES Super absorbent sponges. The soft sponge holds water and removes dirt from paintwork, glass, trim, wheels and tyres. It has a large surface area for effective cleaning with minimum effort, and will not scratch. These Polishing Cloths have a super soft cotton construction which is highly absorbent and traps dirt and moisture with minimum effort. They are super soft so will not scratch any surface. Use to polish and give shine to paintwork, glass, dashboard, trim and wheels. Size Box Qty Part No. Part No. Single 100g 12 5-50815 5-50815/1 400g 12 5-50816 5-50816/1 TETRION WHITE SPIRIT Triplewax dusters have a traditional, soft absorbent finish making them ideal for trapping dust and polishing surfaces to a high shine. Qty 2x Size Box Qty Part No. Part No. Single Jumbo 12 5-50820 5-50820/1 Large 12 5-50821 5-50821/1 DE-IONISED DISTILLED WATER A multi purpose solvent used for thinning paint and as a general surface cleaner in preparation for further coats of varnish or paint. Conforms to BS245. Description 12 x 750ml bottle Single 750ml bottle TRIPLEWAX DUSTERS (Twin Pack) For Batteries see Section 8 of our catalogue... De-ionised water prevents furring and scale formulation in batteries. Part No. 5-50057 5-50057/1 Description 12 x 1 Litre bottle Single 1 Litre bottle Part No. 5-50060 5-50060/1 Helps prevent condensation, damp and mildew. Safe, simple and effective comes with refillable plastic tray. TETRION MOISTURE MATE Description Pack of 6 complete Single unit complete Refills only. Pack of 12 Single Refill • Lid seals crystals safely inside • Designed to fit window sills and other narrow surfaces • Active for up to three months, depending on levels of humidity • Re-useable - replenish with refils UNIMASK TACK RAGS (10PK) A professional grade tack rag removes all particles of dust and fluff leaving a clean surface ready for coating. Description Part No. 20 packs of 10 5-50818 Single pack 5-50818/1 Box Qty Part No. Part No. Single 12 5-50826 5-50826/1 Part No. 5-50495 5-50495/1 5-50496 5-50496/1 DISPOSABLE LATEX GLOVES Ambidextrous, lightly powdered, non-sterile latex gloves. Description 50 Pairs (Large) Part No. 5-50836 PAINT & VARNISH REMOVER NITROMORS ALL-PURPOSE PAINT & VARNISH REMOVER • Removes cellulose, acrylic, polyurethane and most kinds of epoxy base coats • Thick semi-gel with excellent non-drip characteristics • Fast acting dichloromethane free formula • Green coloured - see where applied • Water and solvent washable • Strips up to twice the paint layers and stays active longer than dichloromethane based paint removers Coverage: 375ml covers up to 1m2 Size 375ml Canister 375ml Canister 750ml Canister 750ml Canister Qty 6 each 6 each Part No. 5-21130 5-21130/1 5-21131 5-21131/1 SECTION 5 67 Thetford, One-Chem & Stankem Toilet Fluids TOILET FLUIDS THETFORD AQUA KEM BLUE TOILET FLUID THETFORD AQUA KEM GREEN TOILET FLUID THETFORD AQUA RINSE PLUS TOILET FLUID A powerful toilet fluid for daily use. This popular toilet fluid has a lovely, fresh scent and lasts four to five days with average use. Even if Aqua Kem Blue freezes, it will still be effective after it defrosts. The famous pink toilet fluid with improved formula for daily use that keeps the flush water fresh and ensures that your toilet flushes effectively. Aqua Rinse Plus prevents deposits from forming in the bowl and promotes easier opening and closing of the toilet blade. Bulk Pack: 6 x 2L bottles: Part No. N-28520 Single 2L bottle: Part No. N-28520/1 A toilet fluid with biological action for daily use. Aqua Kem Green biologically stimulates the breakdown of toilet waste in the waste-holding tank, acting for a maximum of three to four days with average use. It remains fluid up to -20ºC and even if it does freeze, is still effective after defrosting. This product is particularly suitable when emptying the waste-holding tank into septic tanks. Bulk Pack: 12 x 1L bottles: Part No. N-28521 Single 1L bottle: Part No. N-28521/1 Bulk Pack: 6 x 1.5L bottles: Part No. N-28522 Single 1.5L bottle: Part No. N-28522/1 Bulk Pack: 6 x 1.5L bottles: Part No. N-28526 Single 1.5L bottle: Part No. N-28526/1 THETFORD AQUASOFT TOILET TISSUE 4 PACK THETFORD SEAL LUBRICANT Thetford Toilet Paper is specially formulated for chemical toilets and is recommended for both portable and permanent sanitation systems. A silicone seal lubricant 200ml CFC free spray bottle developed for lubricating caravan doors, cassette toilets parts, toilet seats, locks and hinges. Ideal as a awning rail lubricater. • Extra soft in use, it dissolves rapidly and helps avoid clogging • Supplied as an outer of 1 x 4 roll pack of 3 ply extra soft tissue • 225 sheets per roll • Ideal for camping, caravan & motorhome use Bulk Pack: 12 x 200ml bottles: Part No. N-28524 Bulk Pack: 12 x 4 pack: Part No. N-28525 Single 4 pack: Part No. N-28525/1 Single 200ml bottle: Part No. N-28524/1 ONE-CHEM CASSETTE TOILET FLUID ONE-CHEM HOLDING TANK FLUID • Has a clever measuring device, which means no more wasteful overdosing • Is concentrated, giving up to 40 doses • Works for both flush & waste tanks • Is environmentally friendly, bio-degradable pH neutral and formaldehyde free • Is safe, effective and smells great • Is specially designed for boats, barges, motorhomes, RV’s and more marine vessels. • It sanitises & deodorises your holding tank for up to 2 weeks • Each 25ML dose treats up to 100 litres giving an amazing 20 services per bottle • Has a built-in water softener, ideal for hard water areas • Is environmentally friendly, bio-degradable pH neutral and formaldehyde free Bulk Pack: 12 x 1L bottles: Part No. 5-40200 Single 1 litre bottle: Part No. 5-40200/1 Bulk Pack: 12 x 1L bottles: Part No. 5-40201 Single 1 litre bottle: Part No. 5-40201/1 DOMETIC SANITATION TABS STANKEM TOILET FLUIDS Suitable for all cassette toilets, chemical toilets and toilet system holding tanks, our toilet fluids range help to keep your holding tank clean and get rid of unwanted smells. PowerCare Tabs are a highly-effective additive for waste holding tanks GreenCare Tabs are the environmentally friendly version. Both break down waste into liquid and prevent unpleasant odours. *Usage per holding tank capacity. Description Green (non-toxic) concentrate toilet fluid Blue concentrated toilet fluid Perfumed toilet blue fluid Perfumed toilet blue fluid Loo Fresh top tank additive 68 Size 1L 1L 2.5L 5L 1L SECTION 5 Usage* Use 75ml per 10L Use 60ml per 20L Use 60ml per 10L Use 60ml per 10L Use 60ml per 10L Part No. 5-40100 5-40101 5-40102 5-40104 5-40110 • No spills Part No. 9-52105 • Tabs in soluble film • Pre-measured dosage • Add 1 tab + 3L of water for a 20L tank • For all portable toilets • Easy storage • 16 tabs per tub DELIVERY Please contact your nearest Aquafax depot for carriage details. Part No. 9-52106